Re: [2008.12] Help with Om.2008.12 on microsd
Don't know if this is expected behaviour, but when I moved "rw" part before all other kernel parameters: r...@om-gta02:~# cat /boot/append-GTA02 rw console=tty0 loglevel=8 rootdelay=1 now Neo boots fine with Qi and finally shows Illume desktop and everything. 2009/1/4 Evgeny Karyakin : > 2008/12/30 Andy Green : >> Somebody in the thread at some point said: >> | Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu: >> |> I've been trying to boot 2008.12 from a microsd but it just can't. >> |> It starts booting but then it stops with an "Only GTA01 hardware >> |> supported by ASoc driver" message. >> | >> | Happens to me also, but after that message I also have the following >> | messages (not sure if they change from boot to boot): >> | >> | Unknown HZ value! (87) Assume 100. >> | mount: special device /dev/mmcblkp01 does not exist >> | ALSA: restoring mixer settings... >> | Configuring network interfaces... /usr/sbin/alsactl: load_state:1327: No >> | soundcards found... >> | ADDRCONF(NETDEV_UP): usb0: link is not ready >> | done. >> | >> | I can shutdown by holding the power button. >> | I have FDOM in the same card and it works fine. >> >> I was just meddling with this in NAND, I believe that "ro" on the kernel >> commandline is fatal for startup of 2008.12. When I removed it from Qi, >> 2008.08 started up OK. >> >> So check your U-Boot env if you're using that for "ro", or try adding rw >> to /boot/append-GTA02 if you are on SD Card and Qi. >> >> It's pretty common to boot with rootfs ro initially... > > I have these problems also, and adding "rw" to append-GTA02 didn't > solve it. Full content of my /boot/append-GTA02 is this: "console=tty0 > loglevel=8 rootdelay=1 rw" (brainless copy-paste of everything related > from Qi wiki page[1]). ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [2008.12] Help with Om.2008.12 on microsd
2008/12/30 Andy Green : > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Somebody in the thread at some point said: > | Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu: > |> I've been trying to boot 2008.12 from a microsd but it just can't. > |> It starts booting but then it stops with an "Only GTA01 hardware > |> supported by ASoc driver" message. > | > | Happens to me also, but after that message I also have the following > | messages (not sure if they change from boot to boot): > | > | Unknown HZ value! (87) Assume 100. > | mount: special device /dev/mmcblkp01 does not exist > | ALSA: restoring mixer settings... > | Configuring network interfaces... /usr/sbin/alsactl: load_state:1327: No > | soundcards found... > | ADDRCONF(NETDEV_UP): usb0: link is not ready > | done. > | > | I can shutdown by holding the power button. > | I have FDOM in the same card and it works fine. > > I was just meddling with this in NAND, I believe that "ro" on the kernel > commandline is fatal for startup of 2008.12. When I removed it from Qi, > 2008.08 started up OK. > > So check your U-Boot env if you're using that for "ro", or try adding rw > to /boot/append-GTA02 if you are on SD Card and Qi. > > It's pretty common to boot with rootfs ro initially... I have these problems also, and adding "rw" to append-GTA02 didn't solve it. Full content of my /boot/append-GTA02 is this: "console=tty0 loglevel=8 rootdelay=1 rw" (brainless copy-paste of everything related from Qi wiki page[1]). Problem is, I can't even tell for sure if Neo (Qi actually) boots from uSD or NAND. Hurting my eyes on running on-screen log I saw something like "Waiting for 1sec before rootfs", which suggests that it's Qi taking appeng-GTA02 into consideration. Still I have multiple "read-only filesystem" tar warnings. Every power-up after battery out+in gives Neo several seconds to boot up -- detailed logs on screen -- then it just switches off. Next boots freezes like described by other people in this thread. First "successful" boot freezed on these lines in on-screen log: asoc: WM8753 HiFi <-> s3c24xx-2c mapping ok asoc: WM8753 Voice <-> Bluetooth mappgin ok Only GTA01 hardware supported by ASoc driver Next "successful" boot ended up with previous lines plus this (<...> means long message): mount: special device /dev/mmcblk0p1 does not exist ALSA: <...> <...> load_state:1327: No soundcard found... usb0: link is not ready done. And it freezed again. uSD card must be good, because I can read-write it through notebook card reader and if I go to NAND menu and modify boot command line to load from uSD, it works just fine. Behaviour is unstable: I could boot (from NAND!) *once* while trying to boot from uSD/Qi , and it's the same with 2008.12 release as well as with 04.01.2009 testing. I also boot with SIM card inserted so weak uSD reader contacts shouldn't be an issue. Should I return to u-boot technique for starting up Neo? I wanted to give Qi a try for it is a "modern" way of doing things. [1]http://wiki.openmoko.org/wiki/Qi ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [2008.12] Help with Om.2008.12 on microsd
Em Ter, Dezembro 30, 2008 14:51, Ed Kapitein escreveu: > did you try so set the glamo_mci.sd_max_clk, acording to: > http://docs.openmoko.org/trac/ticket/1743 ? I solved the problem with Andy's suggestion of removing "ro" from u-boot (see another message I just sent). This was with an 8GB card from Kingston. I tried the glamo_mci.sd_max_clk with another card I have (Transcend 4GB) that doesn't work and it did not help. Any other tricks that I should try to get this card to work? -- Rúben Leote Mendes -- ru...@nocturno.org ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [2008.12] Help with Om.2008.12 on microsd
Em Ter, Dezembro 30, 2008 14:26, Andy Green escreveu: > I was just meddling with this in NAND, I believe that "ro" on the kernel > commandline is fatal for startup of 2008.12. When I removed it from Qi, > 2008.08 started up OK. > > So check your U-Boot env if you're using that for "ro", or try adding rw > to /boot/append-GTA02 if you are on SD Card and Qi. That's it. Removed "ro" from u-boot and 2008.12 started fine. Thanks! -- Rúben Leote Mendes -- ru...@nocturno.org ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [2008.12] Help with Om.2008.12 on microsd
did you try so set the glamo_mci.sd_max_clk, acording to: http://docs.openmoko.org/trac/ticket/1743 ? Kind regards, Ed On Tue, 2008-12-30 at 14:17 +, Ruben Leote Mendes wrote: > Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu: > > I've been trying to boot 2008.12 from a microsd but it just can't. > > It starts booting but then it stops with an "Only GTA01 hardware > > supported by ASoc driver" message. > > Happens to me also, but after that message I also have the following > messages (not sure if they change from boot to boot): > > Unknown HZ value! (87) Assume 100. > mount: special device /dev/mmcblkp01 does not exist > ALSA: restoring mixer settings... > Configuring network interfaces... /usr/sbin/alsactl: load_state:1327: No > soundcards found... > ADDRCONF(NETDEV_UP): usb0: link is not ready > done. > > I can shutdown by holding the power button. > I have FDOM in the same card and it works fine. > > Any clues? > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [2008.12] Help with Om.2008.12 on microsd
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu: |> I've been trying to boot 2008.12 from a microsd but it just can't. |> It starts booting but then it stops with an "Only GTA01 hardware |> supported by ASoc driver" message. | | Happens to me also, but after that message I also have the following | messages (not sure if they change from boot to boot): | | Unknown HZ value! (87) Assume 100. | mount: special device /dev/mmcblkp01 does not exist | ALSA: restoring mixer settings... | Configuring network interfaces... /usr/sbin/alsactl: load_state:1327: No | soundcards found... | ADDRCONF(NETDEV_UP): usb0: link is not ready | done. | | I can shutdown by holding the power button. | I have FDOM in the same card and it works fine. I was just meddling with this in NAND, I believe that "ro" on the kernel commandline is fatal for startup of 2008.12. When I removed it from Qi, 2008.08 started up OK. So check your U-Boot env if you're using that for "ro", or try adding rw to /boot/append-GTA02 if you are on SD Card and Qi. It's pretty common to boot with rootfs ro initially... - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAklaL68ACgkQOjLpvpq7dMpdZwCfY23A6BvOiEu/OQx2bRnJh3A5 cJkAn2Mu/MbFjCdP9MIcdIqWAMpeHCYD =Nm0M -END PGP SIGNATURE- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [2008.12] Help with Om.2008.12 on microsd
Em Sab, Dezembro 27, 2008 04:06, Kosa escreveu: > I've been trying to boot 2008.12 from a microsd but it just can't. > It starts booting but then it stops with an "Only GTA01 hardware > supported by ASoc driver" message. Happens to me also, but after that message I also have the following messages (not sure if they change from boot to boot): Unknown HZ value! (87) Assume 100. mount: special device /dev/mmcblkp01 does not exist ALSA: restoring mixer settings... Configuring network interfaces... /usr/sbin/alsactl: load_state:1327: No soundcards found... ADDRCONF(NETDEV_UP): usb0: link is not ready done. I can shutdown by holding the power button. I have FDOM in the same card and it works fine. Any clues? -- Rúben Leote Mendes -- ru...@nocturno.org ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [2008.12] Help with Om.2008.12 on microsd
Kosa wrote: > Hi there, > > I've been trying to boot 2008.12 from a microsd but it just can't. > It starts booting but then it stops with an "Only GTA01 hardware > supported by ASoc driver" message. > > It is not the card 'couse it works fine with fdom and shr. > I'm having the same problem here. I've installed the kernel and the rootfs from tar.gz, the kernel boots but the logs say that many devices are missing or are unreadable. Then it stops booting. leonardo. -- http://leonardo.lilik.it Key fingerprint = 2C20 A587 05AC 42E5 1292 D0D4 3EED CFB5 52FD AD1E ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community