Bug#294303: hotplug: Bad NET invocation: $INTERFACE is not set
On Fri, Feb 11, 2005 at 12:19:29AM +0100, Artur R. Czechowski wrote: On Thu, Feb 10, 2005 at 10:18:47AM +0900, Horms wrote: On Wed, Feb 09, 2005 at 02:22:26PM +0100, Artur R. Czechowski wrote: On Wed, Feb 09, 2005 at 07:47:25PM +0900, Horms wrote: I did a bit of poking around, uncomented the DEBUG line (line 33) in /etc/hotplug.d/default/default.hotplug, monitored /var/log/messages, insmoded tun, and found that this bug does not manifest in 2.4.10-1-686 , 2.4.8-2-686 or 2.4.27-2-686. More to the point, tun is a misc device in those kernels and net.agent is not executed. [cut] In any case, Artur, what kernel are you running? Custom 2.6.10 compiled from Debian kernel-source-2.6.10-4. Could you please try one of the kernel images on d.o and see if the problem persists. kernel-image-2.6.10-1-686 2.6.10-4 gives the same result: Feb 10 23:49:46 blabluga net.agent[5662]: Bad NET invocation: $INTERFACE is not set BTW, if you find it usefull, snippet of log with uncommented DEBUG in /etc/hotplug.d/default/default.hotplug follows: Thanks, that is most useful ineed. I am wondering if the reclassification made by /etc/udev/rules.d/udev.rules is correct, given that the kenrel doesn't seem to think that the tun module (i.e. the tun module itself doesn't think) that tun is a net module. Feb 11 00:12:42 blabluga default.hotplug[6581]: arguments (module) env (SUBSYSTEM=module OLDPWD=/ DEVPATH=/module/tun/sections PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEBUG=yes SEQNUM=1044 _=/usr/bin/env) Feb 11 00:12:42 blabluga default.hotplug[6581]: no runnable /etc/hotplug/module.agent is installed Feb 11 00:12:42 blabluga kernel: Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Feb 11 00:12:42 blabluga default.hotplug[6591]: arguments (misc) env (SUBSYSTEM=misc OLDPWD=/ DEVPATH=/class/misc/tun PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEBUG=yes SEQNUM=1045 _=/usr/bin/env) Feb 11 00:12:42 blabluga default.hotplug[6591]: no runnable /etc/hotplug/misc.agent is installed Feb 11 00:12:42 blabluga default.hotplug[6575]: arguments (module) env (SUBSYSTEM=module OLDPWD=/ DEVPATH=/module/tun PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 DEBUG=yes SEQNUM=1043 _=/usr/bin/env) Feb 11 00:12:42 blabluga default.hotplug[6575]: no runnable /etc/hotplug/module.agent is installed Feb 11 00:12:42 blabluga udev[6599]: configured rule in '/etc/udev/rules.d/udev.rules[98]' applied, 'tun' becomes 'net/%k' Feb 11 00:12:42 blabluga udev[6599]: creating device node '/dev/net/tun' Feb 11 00:12:42 blabluga default.hotplug[6606]: arguments (net) env (SUBSYSTEM=misc OLDPWD=/ DEVPATH=/class/misc/tun PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug UDEV_LOG=1 UDEVD_EVENT=1 DEVNAME=/dev/net/tun SHLVL=2 HOME=/ DEBUG=yes SEQNUM=1045 _=/usr/bin/env) Feb 11 00:12:42 blabluga default.hotplug[6606]: invoke /etc/hotplug/net.agent () Feb 11 00:12:42 blabluga net.agent[6606]: Bad NET invocation: $INTERFACE is not set BTW, if I run an application using tun device (vtund in my case) I noticed following information in the log: Feb 11 00:16:04 blabluga default.hotplug[6713]: arguments (net) env (SUBSYSTEM=net OLDPWD=/ DEVPATH=/class/net/tun0 PATH=/bin:/sbin:/usr/sbin:/usr/bin ACTION=add PWD=/etc/hotplug HOME=/ SHLVL=2 INTERFACE=tun0 DEBUG=yes SEQNUM=1046 _=/usr/bin/env) Feb 11 00:16:04 blabluga default.hotplug[6713]: invoke /etc/hotplug/net.agent () Feb 11 00:16:04 blabluga net.agent[6713]: assuming tun0 is already up Cheers Artur -- Nie taki daemon straszny jak go killuj /z pamitnika administratora/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Horms
Bug#294700: pppconfig: [INTL:tl] Tagalog program templates translation
Package: pppconfig Version: 2.3.10 Severity: wishlist Tags: patch l10n Please find attached the Tagalog translation file for pppconfig from Rick Bahague, Jr. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.0 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages pppconfig depends on: ii dialog 1.0-20050116-1 Displays user-friendly dialog boxe ii ppp 2.4.2+20040428-6 Point-to-Point Protocol (PPP) daem ii whiptail0.51.6-20Displays user-friendly dialog boxe -- no debconf information # translation of pppconfig_po.po to tagalog # Copyright (C) 2005 Rick Bahague Jr. # # This file is distributed under the same license as the pppconfig package. ## rick bahague jr [EMAIL PROTECTED], 2005. # Rick Bahague Jr [EMAIL PROTECTED], 2005. # msgid msgstr Project-Id-Version: pppconfig\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2004-11-25 13:28-0600\n PO-Revision-Date: 2005-02-11 09:46+0800\n Last-Translator: Rick Bahague Jr [EMAIL PROTECTED]\n Language-Team: Tagalog [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: KBabel 1.9.1\n #. Arbitrary upper limits on option and chat files. #. If they are bigger than this something is wrong. #: pppconfig:70 msgid \GNU/Linux PPP Configuration Utility\ msgstr \Kasangkapan sa pagsasaayos ng GNU/Linux PPP\ #: pppconfig:129 msgid No UI\n msgstr Walang UI\n #: pppconfig:132 msgid You must be root to run this program.\n msgstr Kailangang ika'y root upang mapatakbo ang program na ito.\n #: pppconfig:133 pppconfig:134 #, perl-format msgid %s does not exist.\n msgstr %s hindi matagpuan.\n #. Parent #: pppconfig:162 msgid Can't close WTR in parent: msgstr Hindi maisara ang WTR sa parent: #: pppconfig:168 msgid Can't close RDR in parent: msgstr Hindi maisara ang RDR sa parent: #. Child or failed fork() #: pppconfig:172 msgid cannot fork: msgstr hindi makapag-fork #: pppconfig:173 msgid Can't close RDR in child: msgstr Hindi maisara ang RDR sa child: #: pppconfig:174 msgid Can't redirect stderr: msgstr Hindi ma-ituro sa stderr: #: pppconfig:175 msgid Exec failed: msgstr Bigo ang Exec: #: pppconfig:179 msgid Internal error: msgstr Pagkakamali sa loob: #: pppconfig:256 msgid Create a connection msgstr Gumawa ng koneksyon #: pppconfig:260 #, perl-format msgid Change the connection named %s msgstr Palitan ang koneksyong pinanhalang %s #: pppconfig:263 #, perl-format msgid Create a connection named %s msgstr Gumawa ng koneksyong may pangalang %s #. This section sets up the main menu. #: pppconfig:271 msgid This is the PPP configuration utility. It does not connect to your isp: just configures ppp so that you can do so with a utility such as pon. It will ask for the username, password, and phone number that your ISP gave you. If your ISP uses PAP or CHAP, that is all you need. If you must use a chat script, you will need to know how your ISP prompts for your username and password. If you do not know what your ISP uses, try PAP. Use the up and down arrow keys to move around the menus. Hit ENTER to select an item. Use the TAB key to move from the menu to OK to CANCEL and back. To move on to the next menu go to OK and hit ENTER. To go back to the previous menu go to CANCEL and hit enter. msgstr Ito ang gamit sa pagaayos ng PPP. Hindi ito magbibigay ng koneksyon sa inyong isap: inaayos lamang nito ang ppp upang ang koneksyon ay maari nyong magamitan ng ibang gamit tulad ng pon. Ito ay magtatanong ng username, password, at numero ng telepono na ibinigay ng inyong ISP. Kung ang inyong ISP ay gumagamit ng PAP o CHAP ang mga naunang nabanggit lamang ang inyong kailangan. Kung kailangan nyong gumamit ng script ng chap, kailangan malaman nyo kung paano magtanong ng username at password ang inyong ISP. Kung hindi nyo alam ang ginagamit ng inyong ISP, subukan ang PAP. Gamitin ang mga keys na arrow up at down upang mabaybay ang mga menus. Pindutin ang ENTER upang mapili ang item. Gamitin ang key na TAB upang makalipat mula sa menu tungo sa OK o CANCEL at pabalik. Upang makalipat sa susunod na menu tumungo sa OK at pindutin ang ENTER. Upang makabalik sa nakaraan menu tumungo sa CANCEL at pindutin ang enter. #: pppconfig:272 msgid Main Menu msgstr Pangunahing Menu #: pppconfig:274 msgid Change a connection msgstr Palitan ang koneksyon #: pppconfig:275 msgid Delete a connection msgstr Burahin ang koneksyon #: pppconfig:276 msgid Finish and save files msgstr Tapusin at itago ang files #: pppconfig:284 #, perl-format msgid Please select the authentication method for this connection. PAP is the method most often used in Windows 95, so if your ISP supports the NT or Win95 dial up client, try PAP. The method is now set to %s. msgstr Pumili ng
Bug#289690: kernel-image-2.6.8-2-686: smbfs : i/o error
On Thu, Feb 10, 2005 at 09:57:37AM +0100, Thomas CLavier wrote: Ognyan Kulev wrote: I've just upgraded to 2.6.10 and the problem has completely disappeared. Yes, but the official 2.6 sarge kernel is 2.6.8-2 :-( Yes, but the information on 2.6.10 is still useful, as it indicates there is a fix there that is missing. Now to find it... -- Horms -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294349: kernel-image-2.6.10-1-686: Unable to mount USB2.0 drives with default .config
On Thu, Feb 10, 2005 at 12:18:25PM +0100, [EMAIL PROTECTED] wrote: Dear Debian Kernel Developers, I am sorry to say that the solution I gave in my submission: [EMAIL PROTECTED] writes: [...] I have checked, that compiling a new kernel, with the following options disabled: CONFIG_USB_EHCI_SPLIT_ISO=n CONFIG_USB_EHCI_ROOT_HUB_TT=n (the kernel-image-2.6.10 package from Debian has CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y ) the new compiled kernel has no problems seeing and mounting the USB Flash drive. does actually not work. I was sure I had checked it, but yesterday the kernel compiled with the above configuration gave the same errors. Thanks for the update. -- Horms -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294652: kernel-image-2.6.8-2-686: fan never start on laptop EVO N610c
On Thu, Feb 10, 2005 at 11:40:25PM +0100, vincent wrote: Package: kernel-image-2.6.8-2-686 Version: 2.6.8-13 Severity: normal the fan on the laptop nerver start automatically I can start manually, but I can't stop ... # cat /proc/acpi/fan/C1DA/state status: off # echo on /proc/acpi/fan/C1DA/state # cat /proc/acpi/fan/C1DA/state # The system is a laptop Compaq Evo N610c To help debug this problem, is there a chance that you could try out the 2.6.10 images that are in the debian archive. Also, if you could attach the output of dmsg that might help in tracking the problem down. Thanks -- Horms -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294559: Public domain licensing
Dear knowledge source, As can be seen in #294559 I hope to become a debian developer. In the same bug report one can see that the package I'd like to start with is netbiff. According to it's web page the license is: License All code contained in netbiff is released into the public domain. Until I got asked me to double check with you I thought no problems existed including software with public domained source code in debian. It have been claimed that PD is a vague definition and the way GNU defines freedom, PD is only almost free because future versions might not be free. But that only applies do derived works, right? My understanding is that once released under the public domain, the public's right to that release can't be revoked? Have I gotten that entirely wrong? Will the upstream developer have to add a copyright claim to the PD license too to make it legal? I could try convince the Author to change to another license if there are serious problems with having PD software in debian. However I would prefer not to since I consider it to be the Author's right to choose what license to release his work under and respecting the wishes of others are important to me. -- /Martin signature.asc Description: Digital signature
Bug#11147: Reduce Spam
Never worry about Spyware again! Protection is easy with Spy-Control. In minutes, you can identify and remove all malicious infections. Spy-Control provides absolute Spyware elimination and prevention - our Live Montoring Shield will stop Spyware before it reaches your PC, the smart Popup Blocker will make sure you are not harassed by commercials, and you'll get full access to our Helpdesk where our capable support staff will be glad to assist you with every question you might have. Avoid Credit Card Fraud Protect Privacy Personal Information Prevent Identity Theft Reduce Spam Increase PC and Internet Speeds End Home Page Hijacking Never see a Popup again http://www.deletespyware.info/?aid=187 Spy-Control is the most widely used and trusted Spyware protection program in the world. Installed on over 13 million PC's and trusted by some of the world's largest companies- with Spy-Control, you can be certain you are getting the best protection available today! http://www.deletespyware.info/?aid=187 Find out how many Spyware Agents are watching you right now! No More http://www.deletespyware.info/discon
Bug#108938: Reduce Spam
Never worry about Spyware again! Protection is easy with Spy-Control. In minutes, you can identify and remove all malicious infections. Spy-Control provides absolute Spyware elimination and prevention - our Live Montoring Shield will stop Spyware before it reaches your PC, the smart Popup Blocker will make sure you are not harassed by commercials, and you'll get full access to our Helpdesk where our capable support staff will be glad to assist you with every question you might have. Avoid Credit Card Fraud Protect Privacy Personal Information Prevent Identity Theft Reduce Spam Increase PC and Internet Speeds End Home Page Hijacking Never see a Popup again http://www.deletespyware.info/?aid=187 Spy-Control is the most widely used and trusted Spyware protection program in the world. Installed on over 13 million PC's and trusted by some of the world's largest companies- with Spy-Control, you can be certain you are getting the best protection available today! http://www.deletespyware.info/?aid=187 Find out how many Spyware Agents are watching you right now! No More http://www.deletespyware.info/discon
Bug#293203: less: Lines longer than screen do not display correctly (fwd)
On February 06 2005 09:16, you wrote: The test file is displayed without troubles here. I'm testing with konsole and $TERM=xterm. I also have $TERM=xterm What does ls -l /dev/tty show? Do you have other programs that behave strangely? $ ls -l /dev/tty crw-rw-rw- 1 root tty 5, 0 Feb 6 09:29 /dev/tty As far as I can tell, less is the only program on my machine behaving strangely. Also, if I ssh into another machine from mine, less seems to work correctly, while the opposite does not work (ssh to my machine from another). I also downloaded and compiled less-382, and it works just fine. Besides that, maybe strace shows something... I've attached the output of strace, but I suspect you may not find anything interesting in it because the problem seems to go away when I run less through strace. I used this command: strace less testfile 2less.strace Thomas Luke Campagnola wrote: On February 02 2005 06:43, you wrote: -S really should make a visible difference None whatsoever. Is this happining on all files as soon as they contain lines longer than then screen or do some work and some don't? What is the simplest file it happens on? As an example, I have written a file that consists of 40 lines of abcdefghijklmnopqrstuvwxyz0123456789 If I make my console window very small - 26x12 (to cause wrapping, and such that it fits nicely in an e-mail) and view this file in less, I see: abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 This looks ok. Now I'll press the down arrow once, then the up arrow once. Here's what I see: abcdefghijklmnopqrstuvwxyz 0123456789klmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz Now if I press the down arrow again, I see this: 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz 0123456789 abcdefghijklmnopqrstuvwxyz abcdefghijklmnopqrstuvwxyz 0123456789 Do you have any environment variables or configuration files that affect less' behavior? Like ~/.less, $LESS, $LESSOPEN? No ~/.less file, and no variables with LESS in them. The problem exists in both xterm, konsole, and on a plain console. I also noticed that when less first opens this kind of file, it displays too many lines. For instance, in the example above, less tried to display the first 12 lines, even though there was only room for 6 since the lines were wrapped around. Luke execve(/usr/bin/less, [less, tmp/testfile], [/* 21 vars */]) = 0 uname({sys=Linux, node=rock, ...}) = 0 brk(0) = 0x8063000 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000 access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or directory) open(/etc/ld.so.preload, O_RDONLY)= 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=19, ...}) = 0 old_mmap(NULL, 19, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0x40018000 close(3)= 0 open(/lib/libsafe.so.2, O_RDONLY) = 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\24\24\0..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=18676, ...}) = 0 old_mmap(NULL, 21808, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40019000 old_mmap(0x4001e000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x4000) = 0x4001e000 close(3)= 0 munmap(0x40018000, 19) = 0 open(/etc/ld.so.cache, O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=101204, ...}) = 0 old_mmap(NULL, 101204, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001f000 close(3)= 0 access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or directory) open(/usr/lib/libncurses.so.5, O_RDONLY) = 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\220\342..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=252592, ...}) = 0 old_mmap(NULL, 257868, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40038000 old_mmap(0x4006e000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x35000) = 0x4006e000 close(3)= 0 access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or directory) open(/lib/tls/libc.so.6, O_RDONLY)= 3 read(3, \177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340X\1..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0644, st_size=1279300, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40077000 old_mmap(NULL, 1289612, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40078000
Bug#293203: less: Lines longer than screen do not display correctly
Some extra information for this bug: If I specify the full path to the less binary, the problem goes away. For example: $ less -S file Does not yield the same output as $ /usr/bin/less -S file This led me to believe there was another less someplace else on the system, however which verifies I am indeed running /usr/bin/less -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294559: Public domain licensing
On Thu, Feb 10, 2005 at 03:12:32PM +0100, Martin Samuelsson wrote: It have been claimed that PD is a vague definition and the way GNU defines freedom, PD is only almost free because future versions might not be free. But that only applies do derived works, right? My understanding is that once released under the public domain, the public's right to that release can't be revoked? Have I gotten that entirely wrong? I've never heard of this. Public domain works are free. One theoretical problem with public domain software: not all jurisdictions, as far as I vaguely understand, actually have a notion of releasing your work into the public domain. A problem some authors have (and probably should have!) is that simply saying released into the public domain isn't disclaiming warranty, so the author might be inviting legal trouble onto himself. For both of these reasons, I usually recommend that people who want to permissively free a work use the MIT license, or the 2-clause BSD license, which are well-established, simple licenses that allow pretty much anything. However, I've never heard any serious claim that works released into the public domain aren't free, and I've never heard of revoking a work from the public domain (if you could do that, it was never in the public domain to begin with). -- Glenn Maynard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#293203: less: Lines longer than screen do not display correctly
I figured it out: alias less=less -r and the manpage says: . . . Thus, various display problems may result, such as long lines being split in the wrong place. Sorry to waste your time. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294701: slapd runs with 80% CPU usage
Package: slapd Version: 2.1.30-3 Severity: important slapd is running with more than 80 % CPU usage and can't be stopped with /etc/init.d/slapd stop, but have to be killed with signal 9. PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND 2765 root 25 0 5456 2384 4752 R 86.3 0.5 89:07.28 slapd -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.9-jb Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) Versions of packages slapd depends on: ii coreutils [fileutils] 5.2.1-2 The GNU core utilities ii debconf 1.4.45 Debian configuration management sy ii fileutils 5.2.1-2 The GNU file management utilities ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libdb4.24.2.52-18Berkeley v4.2 Database Libraries [ ii libgcrypt11 1.2.0-11 LGPL Crypto library - runtime libr ii libgnutls11 1.0.16-13GNU TLS library - runtime library ii libgpg-error0 1.0-1library for common error values an ii libiodbc2 3.52.2-3 iODBC Driver Manager ii libldap22.1.30-3 OpenLDAP libraries ii libltdl31.5.6-4 A system independent dlopen wrappe ii libsasl22.1.19-1.5 Authentication abstraction library ii libslp1 1.0.11a-1OpenSLP libraries ii libwrap07.6.dbs-6Wietse Venema's TCP wrappers libra ii perl [libmime-base64-perl] 5.8.4-6 Larry Wall's Practical Extraction ii psmisc 21.5-1 Utilities that use the proc filesy ii zlib1g 1:1.2.2-4compression library - runtime -- debconf information: slapd/fix_directory: true * shared/organization: IQDoQ slapd/upgrade_slapcat_failure: * slapd/backend: BDB * slapd/allow_ldap_v2: false * slapd/no_configuration: false * slapd/move_old_database: true slapd/suffix_change: false slapd/invalid_suffix: false slapd/slave_databases_require_updateref: slapd/autoconf_modules: true * slapd/domain: jb22.bv.bui.materna.com slapd/password_mismatch: slapd/invalid_config: true slapd/upgrade_slapadd_failure: * slapd/purge_database: false slapd/admin: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294656: malloc: Input/output error with IDLE and Thunderbird
Frederik Kunz writes: Package: courier-imap Version: 3.0.8-3 Severity: important If the IDLE command is used and you connect with Thunderbird (German 1.0) having IDLE support enabled you get these error messages at each login: Feb 6 19:36:11 mail imaplogin: malloc: Input/output error Feb 6 19:36:13 mail imaplogin: LOGOUT, user=whatever, ip=[:::212.221.107.132], headers=0, body=0, time=3 Feb 6 19:36:13 mail imaplogin: LOGOUT, user=whatever, ip=[:::212.221.107.132], headers=273, body=1922, time=41 If you use SSL the message looks like this: Feb 6 19:36:13 mail imapd-ssl: malloc: Input/output error It seems this problem has been there for a while, as there is also an italian report on http://lists.debian.org/debian-italian/2004/11/msg00729.html I did not experience any data loss yet, but removed the IDLE capability just to be sure for now Can you please post your courier-imap configuration file (/etc/courier/imapd) ? Do you have the FAM daemon running ? Bye Racke -- LinuXia Systems = http://www.linuxia.de/ Expert Interchange Consulting and System Administration ICDEVGROUP = http://www.icdevgroup.org/ Interchange Development Team -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294703: request: relativize filename when adding a catalog
Package: sgml-base Version: 1.26 Severity: wishlist (Pardon the outline format) * Summary I was trying to register a local catalog in the super catalog at /etc/sgml/catalog * What I did Protypically put, I did: cd /usr/local/sgml/foo/bar update-catalog --add --super qux.cat * What I'd expected I'd expected that /etc/sgml/catalog would then have contained a line: CATALOG /usr/local/sgml/foo/bar/qux.cat * What I found The file /etc/sgml/catalog contained a line, like: CATLOG qux.cat ...a relative pathname, which did not resolve to the qux.cat that I'd thought I'd specified. * Wishlist item, Summary It could be keen, if update-catalog would notice that a file's pathname should be recorded, as it being an absolute pathname (or a relative pathname, but if relative, then resolving to the file that would have been identified in the call to 'update-catalog') * Proposed Workaround update-catalog --add --super $PWD/qux.cat * Conclusion This is a not a huge issue, granted. I just thought it could be wishlisted. Thanks -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i586) Kernel: Linux 2.6.10 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages sgml-base depends on: ii perl 5.8.4-5Larry Wall's Practical Extraction -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294702: rox: FTBFS on Hurd due to hardcoded references to linux
Package: rox Severity: normal Tags: patch Justification: fails to build from source rox fails to build from source on Hurd, dur to hardcoded references to Linux-ix86 in file debian/rules. Patch is attached to use uname commands in makefile to detect platform exactly like build script does. Regards, Pierre. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10-ac4 Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) --- ROX-ORIG/rox-2.2.0/debian/rules 2005-02-10 15:05:17.0 +0100 +++ ROX/rox-2.2.0/debian/rules 2005-02-05 19:37:09.0 +0100 @@ -7,6 +7,21 @@ PACKAGE := $(shell dh_listpackages) DESTDIR := $(shell pwd)/debian/$(PACKAGE) BUILDDIR := $(shell pwd) +ARCH := $(shell uname -m) +PLATFORM := $(shell uname -s) + +ifeq ($(ARCH),i386) +ARCH = ix86 +endif +ifeq ($(ARCH),i486) +ARCH = ix86 +endif +ifeq ($(ARCH),i586) +ARCH = ix86 +endif +ifeq ($(ARCH),i686) +ARCH = ix86 +endif include /usr/share/dpatch/dpatch.make @@ -30,7 +45,7 @@ myclean: dh_testdir dh_testroot - ( cd ${BUILDDIR}/ROX-Filer rm -rf build Linux-ix86 ) + ( cd ${BUILDDIR}/ROX-Filer rm -rf build ${PLATFORM}-${ARCH} ) rm -f build-stamp configure-stamp rm -rf $(DESTDIR) dh_clean @@ -51,7 +66,7 @@ cp -r ${BUILDDIR}/ROX-Filer/images ${DESTDIR}/usr/share/rox cp -r ${BUILDDIR}/ROX-Filer/ROX ${DESTDIR}/usr/share/rox - cp ${BUILDDIR}/ROX-Filer/Linux-ix86/ROX-Filer ${DESTDIR}/usr/bin/rox + cp ${BUILDDIR}/ROX-Filer/${PLATFORM}-${ARCH}/ROX-Filer ${DESTDIR}/usr/bin/rox cp ${BUILDDIR}/ROX-Filer/.DirIcon ${DESTDIR}/usr/share/rox/.DirIcon cp rox.xml ${DESTDIR}/usr/share/mime/packages
Bug#293421: Installed size of development package has quadrupled since GTK+ 2.4.14
Hi, [EMAIL PROTECTED] - Thu, Feb 03, 2005: I'm guessing that -g was not switched on in the previous version. Perhaps now that the -dbg packages are available, the -dev packages should be stripped? dh_strip is correctly called, and for .a files, strip --strip-debug is called. I've tried running strip and strip --strip-debug on the .a myself, and looked whether the .a was still usable. I've built a Gtk binary with: bee% gcc test.o ./libgtk-x11-2.0.a /usr/lib/libgdk-x11-2.0.a \ /usr/lib/libatk-1.0.a /usr/lib/libgdk_pixbuf-2.0.a /usr/lib/libm.a \ /usr/lib/libpangoxft-1.0.a /usr/lib/libpangox-1.0.a \ /usr/lib/libpango-1.0.a /usr/lib/libgobject-2.0.a \ /usr/lib/libgmodule-2.0.a /usr/lib/libdl.a /usr/lib/libglib-2.0.a \ /usr/X11R6/lib/libX11.a /usr/lib/libfontconfig.a /usr/lib/libXcursor.a \ /usr/X11R6/lib/libXext.a /usr/lib/libXrender.a /usr/lib/libXft.a \ /usr/X11R6/lib/libXinerama.a /usr/X11R6/lib/libXrandr.a \ /usr/X11R6/lib/libXi.a /usr/lib/libpng12.a /usr/lib/libjpeg.a \ /usr/lib/libtiff.a /usr/lib/libpangoft2-1.0.a /usr/lib/libfreetype.a \ /usr/lib/libexpat.a /usr/X11R6/lib/libX11.a /usr/lib/libfontconfig.a \ /usr/lib/libXrender.a /usr/lib/libz.a /usr/lib/libm.a -o test I could build it with the current version in Debian (which is 'strip --strip-debug'ed), but not with a stripped version. There might be a lot of reasons for this problem, the ones I think of are: - gtk wasn't built in the same way as it was before upstream (I'm talking of the autoconf/automake/libtool/etc. changes upstream might have made), - gtk simply added many symbols and cross-references and the size increase is normal, - previous .a were unusable, - strip is wrongly called in dh_strip and might remove a lot more than what we think, - strip has a bug and should remove more or have more configuration parameters to remove things from the .a. Questions we need to solve: - is the .a correctly built (might include too much from the ground up)? - could we strip more from the .a and still use it? Regards, -- Loïc Minier [EMAIL PROTECTED] Neutral President: I have no strong feelings one way or the other.
Bug#294707: tomcat4: Tomcat ignores allowLinking resource on restart (not reload) from manager
Package: tomcat4 Version: 4.1.31-local-3 Severity: important Tags: patch Tomcat forgets allowLinking resource on restart from manager interface. Quick investigation has shown - during stop allowLinking resetting to false and the system startup will fail. I have found that bug in tomcat maillist (http://issues.apache.org/bugzilla/show_bug.cgi?id=21818) In HEAD that bug is fixed. But in debian package not yet :-( I have stolen a patch fron CVS and apply to source from debian package. After install that package I had pass some test with restart application from manager (I use log4j symlink in WEB-INF in my webapp). Its work fine. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.10-dl380-g3.guard Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages tomcat4 depends on: ii adduser 3.59 Add and remove users and groups ii apache2-common2.0.52-3 Next generation, scalable, extenda ii libtomcat4-java 4.1.31-local-3 Java Servlet engine -- core librar ii sun-j2sdk1.5 [java-compil 1.5.0+update01 Java(TM) 2 SDK, Standard Edition, ii sun-j2sdk1.5debian [java- 0.18 Debian specific parts of Java(TM) -- no debconf information The patch: diff -Nur jakarta-tomcat-4.1.31-src.orig/catalina/src/share/org/apache/catalina/core/StandardContext.java jakarta-tomcat-4.1.31-src/catalina/src/share/org/apache/catalina/core/StandardContext.java --- jakarta-tomcat-4.1.31-src.orig/catalina/src/share/org/apache/catalina/core/StandardContext.java 2004-09-25 19:44:19.0 +0300 +++ jakarta-tomcat-4.1.31-src/catalina/src/share/org/apache/catalina/core/StandardContext.java 2005-02-10 16:39:03.0 +0200 @@ -82,7 +82,7 @@ * * @author Craig R. McClanahan * @author Remy Maucherat - * @version $Revision: 1.125 $ $Date: 2004/08/26 21:32:20 $ + * @version $Revision: 1.126 $ $Date: 2004/11/19 20:52:02 $ */ public class StandardContext @@ -134,7 +134,6 @@ */ private boolean available = false; - /** * The Locale to character set mapper for this application. */ @@ -417,6 +416,24 @@ /** + * Case sensitivity. + */ +protected boolean caseSensitive = true; + + +/** + * Allow linking. + */ +protected boolean allowLinking = false; + + +/** + * Cache TTL in ms. + */ +protected int cacheTTL = 5000; + + +/** * Caching allowed flag. */ protected boolean cachingAllowed = true; @@ -427,6 +444,7 @@ */ protected DirContext webappResources = null; + // - Context Properties @@ -447,6 +465,55 @@ } + +/** + * Set case sensitivity. + */ +public void setCaseSensitive(boolean caseSensitive) { +this.caseSensitive = caseSensitive; +} + + +/** + * Is case sensitive ? + */ +public boolean isCaseSensitive() { +return caseSensitive; +} + + +/** + * Set allow linking. + */ +public void setAllowLinking(boolean allowLinking) { +this.allowLinking = allowLinking; +} + + +/** + * Is linking allowed. + */ +public boolean isAllowLinking() { +return allowLinking; +} + + +/** + * Set cache TTL. + */ +public void setCacheTTL(int cacheTTL) { +this.cacheTTL = cacheTTL; +} + + +/** + * Get cache TTL. + */ +public int getCacheTTL() { +return cacheTTL; +} + + /** * Returns true if the internal naming support is used. */ @@ -3281,8 +3348,19 @@ try { ProxyDirContext proxyDirContext = new ProxyDirContext(env, webappResources); +if (webappResources instanceof FileDirContext) { +filesystemBased = true; +((FileDirContext) webappResources).setCaseSensitive +(isCaseSensitive()); +((FileDirContext) webappResources).setAllowLinking +(isAllowLinking()); +} + if (webappResources instanceof BaseDirContext) { ((BaseDirContext) webappResources).setDocBase(getBasePath()); +((BaseDirContext) webappResources).setCached +(isCachingAllowed()); +((BaseDirContext) webappResources).setCacheTTL(getCacheTTL()); ((BaseDirContext) webappResources).allocate(); } this.resources = proxyDirContext; diff -Nur jakarta-tomcat-4.1.31-src.orig/catalina/src/share/org/apache/catalina/mbeans/mbeans-descriptors.xml jakarta-tomcat-4.1.31-src/catalina/src/share/org/apache/catalina/mbeans/mbeans-descriptors.xml --- jakarta-tomcat-4.1.31-src.orig/catalina/src/share/org/apache/catalina/mbeans/mbeans-descriptors.xml 2004-09-25 19:44:19.0 +0300 +++
Bug#294704: ipopd-ssl: after client's failure to connect processes (ipop3d) remains
Package: ipopd-ssl Version: N/A; reported 2005-02-11 Severity: important Client tries to connect and I see in logs something like pop3s SSL service init from 192.168.1.215 but that is all. The client reports failure in connection and that it was refused by the server. The problem is that the corresponding processes ipop3d does not exit but remains and can be listed with ps auxf | grep pop root 26622 0.0 0.0 4016 1592 ?S Feb10 0:00 \_ipop3d root 30559 0.0 0.0 4012 1592 ?S Feb10 0:00 \_ipop3d Moreover as there is a limit on connections pre source in xinetd when such processes acumulate it results into denial of service for that client. (Yes this can be changed but that is not a solution) Note that this happens only when the client is connected to the internet with a gsm edge card. That is via mobile operator. If he is connected with wireless or cable everything is O.K. -- System Information Debian Release: 3.0 Architecture: dpkg: failed to open configuration file `/etc/dpkg/dpkg.cfg' for reading: Permission denied Kernel: Linux quantum 2.4.29 #1 SMP Fri Jan 28 11:45:32 CET 2005 i686 Locale: LANG=C, LC_CTYPE=C -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294705: reportbug should not allow non-ASCII characters in email headers
Package: reportbug Version: 3.2 Severity: minor My real name contains an accent (è). When I made an ITP (on gimp-texturize), debian-devel@ never got it. It may be an SMTP problem, but reportbug should not allow non standard From: headers. Thanks in advance -- Package-specific info: ** /home/adn/.reportbugrc: reportbug_version 2.63 mode novice ui text realname Mohammed Adnène Trojette email [EMAIL PROTECTED] -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.4.27-grsec Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages reportbug depends on: ii python2.3 2.3.4-19 An interactive high-level object-o -- no debconf information
Bug#294706: libtasn1-2: changes file is missing priority
Package: libtasn1-2 Version: 0.2.10-4 Severity: normal Hi, when building libtasn1-2 I noticed that the priority is missing for libtasn1-2-dev in the changes file and probably the control file: 1c069fded3091da5c9be3c65c2c6756d 184514 libdevel - libtasn1-2-dev_0.2.10-3_amd64.deb MfG Goswin -- System Information: Debian Release: 3.1 Architecture: amd64 (x86_64) Kernel: Linux 2.6.8-frosties-1 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages libtasn1-2 depends on: ii libc6 2.3.2.ds1-20.0.0.1.pure64 GNU C Library: Shared libraries an -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294303: hotplug: Bad NET invocation: $INTERFACE is not set
On Fri, Feb 11, 2005 at 04:46:33PM +0900, Horms wrote: On Fri, Feb 11, 2005 at 12:19:29AM +0100, Artur R. Czechowski wrote: [cut] BTW, if you find it usefull, snippet of log with uncommented DEBUG in /etc/hotplug.d/default/default.hotplug follows: Thanks, that is most useful ineed. I am wondering if the reclassification made by /etc/udev/rules.d/udev.rules is correct, given that the kenrel doesn't seem to think that the tun module (i.e. the tun module itself doesn't think) that tun is a net module. Look at http://bugs.debian.org/129968, maybe it would give you a hint. BTW, I placed 01tun.rules file with content: KERNEL=tun, NAME=misc/%k, SYMLINK=net/%k and this annoying message does not appear anymore. It looks for me that hotplug should have an exception for net/tun (but not net/tun?*) class and serve it as a misc device instead net. Am I right? Cheers Artur -- Co wolno Adminowi, to nie Uytkownikowi /z pamitnika administratora/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#278699: Removing ssh keys
On Thu, Feb 10, 2005 at 03:52:49PM +0100, Martin Schulze wrote: Matt Kraai wrote: Howdy, To fix 278699, I'd like to document how to remove ssh keys via the mail gateway. How is this done? printf del sshRSAAuthKey\ndelsshDSAAuthKey\n|clearsign|mail [EMAIL PROTECTED] Actually, this is even documented on http://db.debian.org/doc-mail.html: * A line of the form 'del field' will completly remove all occurrences of a field. Useful e.g. to unset your vacation status. The fields that can be deleted are: c, l, facsimiletelephonenumber, telephonenumber, postaladdress, postalcode, emailforward, ircnick, onvacation, labeleduri, latitude, longitude, icquin, sshrsaauthkey, and sshdsaauthkey ^ ^ Oops. I checked the list in the 'field: value' item and didn't realize that it differed from one in the 'del field' paragraph. Sorry. -- Matt signature.asc Description: Digital signature
Bug#294708: Installation on Dell PowerEdge 740
Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20050210/ uname -a: Linux (none) 2.6.8-2-i386 #1 Mon Jan 24 03:01:58 EST 2005 i686 unknown Date: 2005-02-11 10:00:00 Method: Booted from the sarge-i386-businesscard.iso Machine: Dell PowerEdge 750 Processor: Celeron 2.4 GHz Memory: 1 GB Root Device: SATA Root Size/partition table: Output of lspci and lspci -n: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] Comments/Problems: If the installer is started with linux26 it fails to detect the cd-rom drive (a TEAC CD 224-E). This step works if I use the default 2.4 kernel. With 2.4 I can see it even as cat /proc/ide/ide0/hda/model. This returns the correct desription of the drive. Best Regards, Peter Hopfgartner -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#281893: libroken16-kerberos4kth: Please link to libdb4.2
Hi, Are there any reasons not linking libroken16 to libdb4.2? Please append me to the list of wishers :) Thanks in advance. -- Alexei Chetroi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#286515: are you sure swap can be labeled?
You could use something like LABEL=root / ext2defaults0 1 LABEL=swap none swapsw 0 0 LABEL=home /home ext2defaults0 1 in your /etc/fstab, instead of /dev/hda1 or /dev/sda1. Is your fstab example a real life one, or fictional? in the 1st case, how did you manage to have the swap labeled?? I don't know how can one label a swap partition, if at all. mkswap/swapon/swapoff don't seem to be providing such an option. I know I can remove the swap partition and create another one with one big file on it to hold the swap, but I suspect from the architectural reasons this will be worse than using a dedicated partition. I have suffered my share of problems with trying to keep 2.4 and 2.6 going together smoothly on the same machine (see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=286515 ) and came up with nothing better than going single and moving the appropriate fstab (sda flavoured for 2.6 and hda for 2.4) in place. BTW, I have never figured how to force the cdrw not to work in the ide-scsi emulation mode in 2.6; even with the ide-cd driver preloaded by /etc/modules and an option options ide-scsi ignore=hdd added to the modules.conf (via update-modutils), the scsi emulation still grabs hdd (somehow pulled in by the sata_sil?) Regards, vassilii -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294710: new upstream available
Package: libeb7 Version: 3.3.2-4 Severity: wishlist I want the package of a new version (libeb9?). The newest stable version is 4.1.3. The license was changed into Modified BSDL from the version 4.1. http://www.sra.co.jp/people/m-kasahr/eb/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294711: default_printer_resolution is not accepted when installing or upgrading
Package: xprt-common Version: 0.1.0.alpha1-8 Severity: normal -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 The answer to the question about DPI is ignored when doing install or upgrade. It is only used when doing `dpkg-reconfigure xprt-common'. - -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.10-ms9 Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages xprt-common depends on: ii debconf [debconf-2.0]1.4.30.11 Debian configuration management sy ii xbase-clients4.3.0.dfsg.1-10 miscellaneous X clients ii xprt-xprintorg [xprt]0.1.0.alpha1-8 Xprint - the X11 print system from - -- debconf information: * xprt-common/default_printer_resolution: 180 xprt-common/remove_old_conffiles: true -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFCDH0Ji2PKBl+Ic14RAlKDAJ4/0GRFScjLKM6CY1OZjQrPWZXqtACfXvjY R/cO0+FH9GIxNWOvJlf3fYc= =OHxI -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294628: Debian's OpenOffice.org bug #294628 is duplicate of #289715
merge 294628 289715 thanks Hi, I (and maintainer of openoffice Ren Engelhard) think, that bug #294628 is a duplicate of #289715 and #284096 Reporter, please spare more time in search for already reported similar bugs. -- Labanaktis/Good luck, Mantas Kriauinas Jabber ID: [EMAIL PROTECTED]GPG ID: 43535BD5 Public organization Open Source for Lithuania - www.akl.lt
Bug#293421: Installed size of development package has quadrupled since GTK+ 2.4.14
On Fri, 2005-02-11 at 09:46 +0100, Loc Minier wrote: dh_strip is correctly called, and for .a files, strip --strip-debug is called. Are the static GTK+ etc libraries actually usable at all? As I understand it, GTK+ can be linked to a static library but there are still many libraries it opens at runtime (gdk image loaders, gtk input methods, Pango engines) which makes providing .a files pretty useless. Ross -- Ross Burton mail: [EMAIL PROTECTED] jabber: [EMAIL PROTECTED] www: http://www.burtonini.com./ PGP Fingerprint: 1A21 F5B0 D8D0 CFE3 81D4 E25A 2D09 E447 D0B4 33DF signature.asc Description: This is a digitally signed message part
Bug#288946: inkscape: FTBFS (amd64/gcc-4.0): error: cast from 'void*' to 'int' loses precision
Most of the build problems on amd64/gcc-4.0 have been fixed by the latest upload, thanks! I still get one single error when building 'inkscape' on amd64 with gcc-4.0: if x86_64-linux-g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/include/freetype2 -I/usr/include/freetype2 -I/usr/X11R6/include -DPOTRACE=\potrace\ -DXTHREADS -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/gtkmm-2.4 -I/usr/lib/gtkmm-2.4/include -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include -I/usr/include/pangomm-1.4 -I/usr/include/atkmm-1.6 -Wall -g -O2 -MT dialogs/export.o -MD -MP -MF dialogs/.deps/export.Tpo -c -o dialogs/export.o `test -f 'dialogs/export.cpp' || echo './'`dialogs/export.cpp; \ then mv -f dialogs/.deps/export.Tpo dialogs/.deps/export.Po; else rm -f dialogs/.deps/export.Tpo; exit 1; fi dialogs/export.cpp: In function 'void sp_export_detect_size(GtkObject*)': dialogs/export.cpp:1301: error: cast from 'void*' to 'int' loses precision make[3]: *** [dialogs/export.o] Error 1 make[3]: Leaving directory `/inkscape-0.41/src' The attached small patch fixes this. Regards Andreas Jochens diff -urN ../tmp-orig/inkscape-0.41/src/dialogs/export.cpp ./src/dialogs/export.cpp --- ../tmp-orig/inkscape-0.41/src/dialogs/export.cpp2005-02-01 08:13:20.0 +0100 +++ ./src/dialogs/export.cpp2005-02-11 10:05:03.524914583 +0100 @@ -1298,7 +1298,7 @@ /* We're now using a custom size, not a fixed one */ /* printf(Detecting state: %s\n, selection_names[key]); */ -selection_type old = (selection_type)((int)gtk_object_get_data(GTK_OBJECT(base), selection-type)); +selection_type old = (selection_type)((long)gtk_object_get_data(GTK_OBJECT(base), selection-type)); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON(gtk_object_get_data(base, selection_names[old])), FALSE); gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON(gtk_object_get_data(base, selection_names[key])), TRUE); gtk_object_set_data(GTK_OBJECT(base), selection-type, (gpointer)key); -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294713: libsnack2: Package is out of date
Package: libsnack2 Version: 2.2.2-3 Severity: normal This shows a release in December 2004, whereas Debian's snack is based on something from 2003. http://www.speech.kth.se/snack/download.html Time to update it! Thanks, Dave -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: powerpc (ppc) Kernel: Linux 2.6.6 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages libsnack2 depends on: ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libogg0 1.1.0-1 Ogg Bitstream Library ii libvorbis0a 1.0.1-1 The Vorbis General Audio Compressi ii libvorbisenc21.0.1-1 The Vorbis General Audio Compressi ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294712: zinf: Quits unexpectedely when seeking an mp3 with the ZinfClassic skin
Package: zinf Version: 2.2.5-5 Severity: normal -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages zinf depends on: ii libatk1.0-0 1.8.0-3 The ATK accessibility toolkit ii libc6 2.3.2.ds1-18 GNU C Library: Shared libraries an ii libgcc1 1:3.4.3-6GCC support library ii libgdbm31.8.3-2 GNU dbm database routines (runtime ii libglib2.0-02.6.1-3 The GLib library of C routines ii libgtk2.0-0 2.4.14-2 The GTK+ graphical user interface ii libid3-3.8.33.8.3-4.1Library for manipulating ID3v1 and ii libmusicbrainz4 2.1.1-3 Second generation incarnation of t ii libpango1.0-0 1.6.0-3 Layout and rendering of internatio ii libstdc++5 1:3.3.5-5The GNU Standard C++ Library v3 ii libvorbis0a 1.0.1-1 The Vorbis General Audio Compressi ii libvorbisfile3 1.0.1-1 The Vorbis General Audio Compressi ii zlib1g 1:1.2.1.1-5 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294681: acpid should do something about sleep/suspend
Am 11.02.2005 um 04:07 schrieb Peter Eckersley: Package: acpid Version: 1.0.4-1 Severity: normal Having just made the transition from apm to acpi, I found both acpi and acpid to be rather unhelpful packages when trying to get suspend working. Google eventually tells you that you need to echo things into /proc/acpi/sleep (which happens to work on my system). Then the system clock starts wandering all over the place, and I had to research the hwlock --hctosys solution. Acpid should at least include something like: http://csd.informatik.uni-oldenburg.de/~eagle/acpid.html in its examples, if not a more explicit debconf framework of attempt to implement ACPI suspend [Y/N]. Packages which include hwclock should drop a script to be executed by acpid. I was blocking this stuff because person one wants to see support for gnome feature xyz, person two for kde, etc. This could get quite complex and maybe its better if the applications provide scripts themselves. Cajus -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294679: luma: Adding a user does not work.
On Thu, 10 Feb 2005 18:51:53 -0800, Cameron Gary [EMAIL PROTECTED] wrote: Package: luma Version: 2.0-3 Severity: important -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-k7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages luma depends on: ii python2.3.4-6An interactive high-level object-o ii python-ldap 2.0.4-1A LDAP interface module for Python ii python-qt33.13-4 Qt3 bindings for Python (default v -- no debconf information Traceback (most recent call last): File /usr/lib/luma/plugins/addressbook/ContactWizard.py, line 150, in checkNext allowedAttributes = self.getAllowedAttributes() File /usr/lib/luma/plugins/addressbook/ContactWizard.py, line 167, in getAllowedAttributes must, may = metaInfo.getAllAttributes(objectClassList) File /usr/lib/luma/base/backend/ObjectClassAttributeInfo.py, line 203, in getAllAttributes classList = self.getClassesWithParents(classList) File /usr/lib/luma/base/backend/ObjectClassAttributeInfo.py, line 424, in getClassesWithParents tmpList = self.getParents(x) File /usr/lib/luma/base/backend/ObjectClassAttributeInfo.py, line 373, in getParents tmpList = self.objectClassesDict[className][PARENTS] KeyError: 'evolutionperson' This bug is known and fixed in current CVS. The 2.0.3 release, which contains this fix, will be made available on 14.02. mfg. Wido -- Wido Depping ICQ: 51303067AIM: wido3379 Jabber: [EMAIL PROTECTED] Blog: http://widoww.blogspot.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#285616: squirrelmail: problem when sending mail with SSL (tries to show http linkdinstead of https)
tags 285616 +moreinfo thank you Could you try setting the StdEnvVars option in the Apache config SSLOptions +StdEnvVars to see if that solves anything? sorry for the late response... I try that as soon as I'll be able to get access to this computer (I need to go over to this client to have a shell on the computer...). Any progress on this issue? Thijs -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#253777: kill -9 after some time?
I've seen this many times, most recently on an upgrade of squid: Unpacking replacement squid-common ... Preparing to replace squid 2.5.5-4 (using .../squid_2.5.5-5_i386.deb) ... Stopping proxy server: Waiting . Failed.. done. Unpacking replacement squid ... For some reason squid just doesn't stop. Manually killing squid works. I have seen this too, but it doesn't happen every time. I have two comments. 1. 120 seconds is a _long_ time to wait for a service to shut down. Is the initscript waiting too long? 2. After some period of time, should the initscript not attempt to kill squid again? After some period of time, should the initscript not kill squid with SIGKILL? Please note that start-stop-daemon has a very useful --retry feature with which initscripts can perform escalating kills. The pdnsd and dnsmasq initscript are good examples to follow. -- Thomas Hood [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294431: Standard network configurations
Please note that the standard way of setting up a Debian system that lacks a permanent network card is: $ cat /etc/hostname foo $ hostname foo $ cat /etc/hosts 127.0.0.1 localhost.localdomain localhost foo ... $ hostname -f localhost.localdomain The setup that I recommend, and which I plan to promote as the future standard, for machines without permanent network cards is: $ cat /etc/hostname foo $ hostname foo $ cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 127.0.1.1 foo ... $ hostname -f foo If the machine has a permanent network card with a permanent IP address (i.e., not assigned by DHCP) but no permanent domain name then the standard configuration is: $ cat /etc/hostname foo $ hostname foo $ cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 202.13.55.88 foo ... $ hostname -f foo If the machine has a permanent network card with a permanent IP address and a permanent domain name then the standard configuration is: $ cat /etc/hostname foo $ hostname foo $ cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 202.13.55.88 foo.foodomain foo ... $ hostname -f foo.foodomain On installation, squid should be able to handle all these standard configurations without failing in order to be considered fit for release. -- Thomas Hood [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294717: gpsbabel doesn't build on most architectures
Package: gpsbabel Version: 1.2.4-1 Severity: serious According to buildd.debian.org, there are different errors during make check on several architectures. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294718: php4 switch to threadsafety renders accelerators unfunctional
Package: php4 Version: = 4:4.3.10-3 From version 4.3.10-3 on php4 is built with enabled thread-safety. This renders accelerators like turck-mmcache or phpa unfunctional. Maybe turck can do the thread-trick (phpa cannot, I mailed with the author), but aptitude forces me to uninstall turck when upgrading from 4.3.10-2 to 4.3.10-3. Btw.: According to the author's website, turck-mmcache is capable of working on a threadsafe php4. I suggest to split up the package into a threaded and a non-threaded one as most of the corporate users rely on accelerators (and not all of them got the Zend-one). Furtheron a dependancy to caudium has been established (need to install caudium when installing php4) which doesn't make sense to me. Cheers, Jan
Bug#294719: wdm: can't fulfill the build dependencies in sarge
Package: wdm Version: 1.27-2.1 Severity: serious Tags: sarge The build dependency on libproplist0-dev can't be fulfilled in sarge. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#292478: oops on boot with usb cdburner attached
I *guess* I'm sitting on the same problem, though here the report would read slightly differently: Had this since I added 2.6.8-1 to 2.6.7: 2.6.8 starts and kind-of freezes after some lines of kernel-error-messages; after mounting the harddisk. Didn't bother, hoping that it would go away with the next version. But on 2.6.8-2 the same thing happens. 2.6.7 boots fine, though. It boots, does a lot of things then writes some error messages. No, /var/log/kern is and remains empty whenever I (fail to) boot to 2.6.8. So here is what happens: ... [c01042ad] kernel-Thread_helper+0x5/0x18 Code: 89 01 89 48 04 b8 00 01 10 00 c7 43 04 00 02 20 00 8d 9a 8c 6note: kblockd/0[42] exited with preempt_count 1 Yenta: [then it continues for a few lines until:] ... ieee1394: Host added:ID:Bus [0-00:1023] GUID [434fc0003ab22838] From then onwards, nothing. It still echoes Enter; but nothing more happens. Ctrl-Alt-Del doesn't work, Ctrl-C, Ctrl-D don't do anything either. Then I found this bug (292478). And checked. If I unplug the usb burner, it does boot; so I guess it is the same bug. But here, 2.6.7 boots great with burner (and burns great). Only with 2.6.8 the trouble crept in. I'm sitting on a DELL Latitude D400, and here I attach the whole dmesg. Of cause, I boot without usb-burner; and attach the device later, so that you know its details (scroll down): Linux version 2.6.8-2-686 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 Mon Jan 24 03:58:38 EST 2005 BIOS-provided physical RAM map: BIOS-e820: - 0009f000 (usable) BIOS-e820: 0009f000 - 000a (reserved) BIOS-e820: 0010 - 0feaa000 (usable) BIOS-e820: 0feaa000 - 1000 (reserved) BIOS-e820: fec1 - fec2 (reserved) BIOS-e820: feda - fee0 (reserved) BIOS-e820: ffb0 - 0001 (reserved) 0MB HIGHMEM available. 254MB LOWMEM available. On node 0 totalpages: 65194 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61098 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Dell Latitude with broken BIOS detected. Refusing to enable the local APIC. ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELLCPi R 0x27d30a0f ASL 0x0061) @ 0x0fef ACPI: FADT (v001 DELLCPi R 0x27d30a0f ASL 0x0061) @ 0x0fef0400 ACPI: ASF! (v016 DELLCPi R 0x27d30a0f ASL 0x0061) @ 0x0fef0800 ACPI: DSDT (v001 INT430 SYSFexxx 0x1001 MSFT 0x010e) @ 0x ACPI: PM-Timer IO Port: 0x808 Built 1 zonelists Kernel command line: root=/dev/hda7 ro Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1399.107 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 250468k/260776k available (1550k kernel code, 9596k reserved, 688k data, 148k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2777.08 BogoMIPS Security Scaffold v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: a7e9f9bf CPU: After vendor identify, caps: a7e9f9bf CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps:a7e9f9bf 0040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4704k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller :00:1f.1 PCI: Transparent bridge - :00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at
Bug#294672: java-package: make-jpkg aborts with bogus error message
Hi all, You mean like this? [EMAIL PROTECTED]:java-probeer$ fakeroot id uid=0(root) gid=0(root) groepen=20(dialout),24(cdrom),25(floppy),29 (audio),44(video),1000(wilfred) [EMAIL PROTECTED]:java-probeer$ fakeroot ls jre-1_5_0_01-linux-i586.bin jre-1_5_0_01-linux-i586.bin [EMAIL PROTECTED]:java-probeer$ fakeroot dh_testroot [EMAIL PROTECTED]:java-probeer$ fakeroot bash [EMAIL PROTECTED]:java-probeer# id uid=1000(wilfred) gid=1000(wilfred) groepen=20(dialout),24(cdrom),25 (floppy),29(audio),44(video),1000(wilfred) [EMAIL PROTECTED]:java-probeer# dh_testroot dh_testroot: You must run this as root (or use fakeroot). [EMAIL PROTECTED]:java-probeer# ls jre-1_5_0_01-linux-i586.bin jre-1_5_0_01-linux-i586.bin Is more information needed? Kind regards, Wilfred de Bondt -- Why postpone until tomorrow what you can postpone indefinitely -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294720: lirc-modules-source: module fails to load (unknown symbols)
Package: lirc-modules-source Version: 0.7.1pre1-2 Severity: grave Justification: renders package unusable I applied the patch from #294689 to build the module for kernel 2.6 However the built module can't be loaded: root[/usr/src]# modprobe lirc_serial FATAL: Error inserting lirc_serial (/lib/modules/2.6.10/misc/lirc_serial.ko): Unknown symbol in module, or unknown parameter (see dmesg) dmesg says: lirc_serial: Unknown symbol lirc_unregister_plugin lirc_serial: Unknown symbol lirc_register_plugin lirc_serial: Unknown symbol lirc_unregister_plugin lirc_serial: Unknown symbol lirc_register_plugin lirc_serial: Unknown symbol lirc_unregister_plugin lirc_serial: Unknown symbol lirc_register_plugin lirc_serial: Unknown symbol lirc_unregister_plugin lirc_serial: Unknown symbol lirc_register_plugin -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (101, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.10 Locale: LANG=C, [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages lirc-modules-source depends on: ii debconf [debconf-2.0] 1.4.45 Debian configuration management sy ii debhelper 4.2.30 helper programs for debian/rules ii debianutils 2.11.2 Miscellaneous utilities specific t -- debconf information: * lirc-modules-source/use_lirc_hints: true lirc-modules-source/parallel_irq: 7 * lirc-modules-source/do-build: false lirc-modules-source/parallel_timer: 65536 * lirc-modules-source/serial_transmitter: false lirc-modules-source/not_needed: * lirc-modules-source/serial_port: 0x3f8 * lirc-modules-source/drivers: serial * lirc-modules-source/serial_irq: 4 * lirc-modules-source/serial_type: Other * lirc-modules-source/kernel-source: /usr/src/linux/ lirc-modules-source/sir_port: 0x2f8 lirc-modules-source/parallel_port: 0x378 * lirc-modules-source/what_next: lirc-modules-source/sir_type: Other * lirc-modules-source/serial_softcarrier: true * lirc-modules-source/kernel-source-not-found: lirc-modules-source/sir_irq: 3 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#293115: logwatch: Not matching size for apache
tag 293115 + pending thanks Piotr Krukowiecki schrieb: Package: logwatch Version: 5.2.2-3 Severity: normal Tags: patch Hi I'm using combined log format for apache: LogFormat %h %l %u %t \%r\ %s %b \%{Referer}i\ \%{User-Agent}i\ \%{forensic-id}n\ combined I think it was default format for apache and I didn't changed it. You are right for apache 1, but apache2 doesn't have the forensic-id field. I'll patch the config file by attached patch. I'll also add a note to README.Debian. An alternative way would be to change the regexes to be non-greedy (which could also speed the parsing up a little bit), but that would need more testing for corner cases (and smells more hackish IMHO). Willi --- /etc/logwatch/conf/services/http.conf 2004-11-21 21:15:32.0 +0100 +++ ../../conf/services/http.conf 2005-02-11 12:04:56.0 +0100 @@ -16,8 +16,14 @@ # bytes_transfered # agent # +#Debians apache2 default configuration needs: $HTTP_FIELDS = client_ip ident userid timestamp request http_rc bytes_transfered referrer agent $HTTP_FORMAT = space space spacebracequote spacespace quote quote + +#If you are using apache 1, use: +#$HTTP_FIELDS = client_ip ident userid timestamp request http_rc bytes_transfered referrer agent forensic +#$HTTP_FORMAT = space space spacebracequote spacespace quote quote quote + # Define the field formats # # the only currently supported formats are:
Bug#261297: corrected
hi I corrected libwaili , that now compiles with newer gcc as well a. -- Andrea Mennucc Ukn ow,Ifina llyfixe dmysp acebar.ohwh atthef -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294171: Problem solved
It turns out that the bug was not in xsane but in libusb. It is solved in the latest issue of libusb (Sid) so the xsane report can be closed. Anthony -- [EMAIL PROTECTED]|| http://www.acampbell.org.uk for using Linux GNU/Debian || weblog, book reviews, electronic Windows-free zone || books and skeptical articles -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294723: installation-reports
Package: installation-reports Debian-installer-version: debian sarge rc2 i386 net install http://www.debian.org/devel/debian-installer/ down loaded on 2005-02-10 uname -a: Linux Pixie248 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux Date: 2005-02-10 13:00 Method: cd boot of linux26, net install from ftp.uk.debian.org, no proxy Machine: Dell Dimension 5000 Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz Memory: 512 Mb Root Device: /dev/sda (SATA) Root Size/partition table: Disk /dev/sda: 160.0 GB, 1600 bytes 255 heads, 63 sectors/track, 19452 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 486 3903763+ 83 Linux /boot /dev/sda2 19210 19452 1951897+ 82 Linux swap /dev/sda3 487 19209 150392497+ 83 Linux / Partition table entries are not in disk order Output of lspci and lspci -n: :00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04) :00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04) :00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) :00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) :00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) :00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) :00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) :00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) :00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) :00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3) :00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) :00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03) :00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) :00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) :00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) :01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5b60 :01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70 :04:03.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) :00:00.0 0600: 8086:2580 (rev 04) :00:01.0 0604: 8086:2581 (rev 04) :00:1c.0 0604: 8086:2660 (rev 03) :00:1c.1 0604: 8086:2662 (rev 03) :00:1d.0 0c03: 8086:2658 (rev 03) :00:1d.1 0c03: 8086:2659 (rev 03) :00:1d.2 0c03: 8086:265a (rev 03) :00:1d.3 0c03: 8086:265b (rev 03) :00:1d.7 0c03: 8086:265c (rev 03) :00:1e.0 0604: 8086:244e (rev d3) :00:1e.2 0401: 8086:266e (rev 03) :00:1f.0 0601: 8086:2640 (rev 03) :00:1f.1 0101: 8086:266f (rev 03) :00:1f.2 0101: 8086:2651 (rev 03) :00:1f.3 0c05: 8086:266a (rev 03) :01:00.0 0300: 1002:5b60 :01:00.1 0380: 1002:5b70 :04:03.0 0200: 14e4:4401 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems:[O] Mount partitions: [O] Install base system:[O] Install boot loader:[O] Reboot: [E] Comments/Problems: config network had to retry at least twice for dhcp to configure it. reboot failed after real time clock driver message - seems to be a known problem - added apci=off to kernel boot options to continue xserver ati driver did not work with this ati graphics card (but thats not an install problem ;-) M. -- Mark Ferguson ClearSpeed Technology plc Tel: +44 117 3172000 3110 Great Western Court, Hunts Ground RoadFax: +44 117 3172002 Stoke Gifford, BRISTOL BS34 8HP Englandhttp://www.clearspeed.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294721: clamsmtp: listeningoutgoing port switched in conf template file
Package: clamsmtp Version: 1.2-3 Severity: minor in default conf file installed listening port and outgoing port is switched (the doc is right, but inside clamsmtpd.conf it is wrong) -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.4.29-C3EZRA Locale: LANG=it_IT, LC_CTYPE=it_IT (charmap=ISO-8859-1) Versions of packages clamsmtp depends on: ii clamav-daemon 0.82-1 antivirus scanner daemon ii debconf [debconf-2.0] 1.4.45 Debian configuration management sy ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an -- debconf information: * clamsmtp/purge: yes clamsmtp/do-fixperms: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294722: dhcp: Missing define in debian/patches/token-ring.patch?
Package: dhcp Version: 2.0pl5-19.1 Severity: normal Hi, the token-ring patch does this in common/dispatch.c: +#ifndef HAVE_ARPHRD_IEEE802_TR +# define ARPHRD_IEEE802_TR HTYPE_IEEE802_TR +#endif + case ARPHRD_IEEE802_TR: + tmp - hw_address.hlen = 6; + tmp - hw_address.htype = ARPHRD_IEEE802; + memcpy (tmp - hw_address.haddr, sa.sa_data, 6); + break; + However, it seems to not #define HTYPE_IEEE802_TR anywhere, so this code is bound to fail on systems which do not #define HAVE_ARPHRD_IEEE802_TR in their include/cf/foo.h header file. The other HTYPE_* get #defined in include/dhcp.h, so this belong there as well I guess. However, I am not sure what HTYPE_IEEE802_TR actually should be defined as. net/if_arp.h #defines HAVE_ARPHRD_IEEE802_TR as 800, but it also #defines ARPHRD_FDDI as 774, while include/dhcp.h has HTYPE_FDDI as 8. Also, I think it be better to move the #endif down the block, as is done for most of the other types: #ifdef HAVE_ARPHRD_NETROM case ARPHRD_NETROM: tmp - hw_address.hlen = 6; tmp - hw_address.htype = ARPHRD_NETROM; memcpy (tmp - hw_address.haddr, sa.sa_data, 6); break; #endif and just add an addtional check like #ifndef ARPHRD_IEEE802_TR # define ARPHRD_IEEE802_TR HTYPE_IEEE802_TR #endif The last issue is that it should be checked whether ARPHRD_ETHER is defined and probably be defined to HTYPE_ETHER if not. cheers, Michael -- Michael Banck Debian Developer [EMAIL PROTECTED] http://www.advogato.org/person/mbanck/diary.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294725: k3b hangs then crashes on startup
Package: k3b Version: 0.11.19-1 Severity: grave Hello, This might be related to Bug#292892, since the symptoms are similar, in which case it is presumably not actually a k3b bug. But it's not exactly the same so I figured I'd better report it here. I'm not sure whether this one should be grave or important, but it certainly renders k3b entirely unusable to me, so I'm going for grave for now. Sorry if I have gotten this wrong. When I start k3b, I get the splash-screen, and it gets to Reading Local Song database. At this point it hangs, for several minutes, using most of my processor time. Then it crashes. Running k3b from the terminal produces the following output: helen:~ k3b k3b: ERROR: (K3bCdDevice) Unable to do inquiry. KCrash: Application 'k3b' crashing... zsh: alarm k3b That's all. Please let me know if I can provide any more information about this problem. Thanks, Helen. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Versions of packages k3b depends on: ii cdparanoia 3a9.8-11An audio extraction tool for sampl ii cdrecord 4:2.01+01a01-2 command line CD writing tool ii k3blibs 0.11.19-1 The KDE cd burning application lib ii kcontrol 4:3.3.2-1 KDE Control Center ii kdebase-bin 4:3.3.2-1 KDE Base (binaries) ii kdelibs-data 4:3.3.2-1 KDE core shared data ii kdelibs4 4:3.3.2-1 KDE core libraries ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libarts1 1.3.2-2 aRts Sound system ii libasound2 1.0.8-1 ALSA library ii libaudio21.7-2 The Network Audio System (NAS). (s ii libaudiofile00.2.6-5 Open-source version of SGI's audio ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libesd0 0.2.35-2Enlightened Sound Daemon - Shared ii libfam0c102 2.7.0-6 client library to control the FAM ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-9 GCC support library ii libglib2.0-0 2.6.2-1 The GLib library of C routines ii libice6 4.3.0.dfsg.1-10 Inter-Client Exchange library ii libidn11 0.5.2-3 GNU libidn library, implementation ii libjack0.80.0-0 0.99.0-4JACK Audio Connection Kit (librari ii libmad0 0.15.1b-1 MPEG audio decoder library ii libogg0 1.1.0-1 Ogg Bitstream Library ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libqt3c102-mt3:3.3.3-8 Qt GUI Library (Threaded runtime v ii libsm6 4.3.0.dfsg.1-10 X Window System Session Management ii libstdc++5 1:3.3.5-8 The GNU Standard C++ Library v3 ii libvorbis0a 1.0.1-1 The Vorbis General Audio Compressi ii libvorbisenc21.0.1-1 The Vorbis General Audio Compressi ii libvorbisfile3 1.0.1-1 The Vorbis General Audio Compressi ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxcursor1 1.1.3-1 X cursor management library ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxft2 2.1.2-6 FreeType-based font drawing librar ii libxrandr2 4.3.0.dfsg.1-10 X Window System Resize, Rotate and ii libxrender1 0.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii mkisofs 4:2.01+01a01-2 Creates ISO-9660 CD-ROM filesystem ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-4 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294726: reportbug bug
Package: reportbug Version: 3.7.1 reportbug fails on my debian unstable install (currently updated) with: reportbug gcc-3.4 Traceback (most recent call last): File /usr/bin/reportbug, line 36, in ? import sys, os ImportError: No module named os -- Ken Foskey OpenOffice.org developer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#261420: Ping pang pong
Hey folks, What's the deal on this one? GStreamer is starting to use check internally on one development branch, and it would be nice to have a package we can point users to. We need some of the functionality in 0.9.2. And hey, the deb work is already done: http://sourceforge.net/project/showfiles.php?group_id=28255package_id=20116release_id=282061 Cheers, -- Andy Wingo http://wingolog.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294481: ghci -lpthread fails
On 10 February 2005 23:35, Ian Lynagh wrote: On Thu, Feb 10, 2005 at 07:00:47PM +0100, Juliusz Chroboczek wrote: Hi Ian, What is your particular problem? Running Darcs under ghci. This seems to work for me (at least in as much as ghci loads and FastPackedString.lengthPS (FastPackedString.packString Foo) says 3): rm -rf .libs rm *ghcidarcsfoo* touch ghcidarcsfoo.c libtool --mode=compile gcc -g -O -c ghcidarcsfoo.c libtool --mode=link gcc -g -O -o libghcidarcsfoo.la ghcidarcsfoo.lo -lpthread -rpath /usr/lib libtool --mode=install cp libghcidarcsfoo.la `pwd`/libghcidarcsfoo.la libtool --finish /usr/lib ghci -cpp -package unix -package parsec -O -funbox-strict-fields -Werror -package util -I. -DHAVE_CURSES -optl-lcurses -optl-lz -L`pwd` -optl-lghcidarcsfoo darcs.lhs compat.o fpstring.o zlib_helper.o c_context.o Is there a problem with this? Could something along these lines be done when -lfoo (as opposed to -optl-lfoo, which for consistency should probably be left alone) is given on the ghci command-line? I'm no library expert, so there may be a cleaner/simpler/more portable equivalent to the above. I'm not that familiar with libtool, but I guess what you're doing here is creating a dummy shared library which is linked against -lpthread, and linking that into GHCi? I don't see any reason why we couldn't automate the process, except that getting all the fiddly details right would probably be a nightmare. And would you require libtool to be installed? What about other platforms - Mac OS X? Cheers, Simon
Bug#293524: ssl.conf: SSLCertificateFile /etc/apache2/ssl/apache.pem
And when you fix ssl.conf, please modify ErrorLog and TransferLog. error_log - error.log access_log - access.log Thanks, -- Kenshi Muto [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#261578: #261578,O: rdiff-backup -- Backup program using deltas for history
Is anyone of you still interested in adopting rdiff-backup? If not, I will take care now. Regards, Daniel -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: [EMAIL PROTECTED] Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294728: FTBFS on kfreebsd-gnu (libtool)
Package: sablotron Version: 1.0-1 Severity: wishlist Tags: patch FTBFS on kfreebsd-gnu, please update libtool and config.{guess,sub} (see #242950 for details). -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: kfreebsd-i386 (i686) Kernel: GNU/kFreeBSD 5.3-3 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294712: zinf: Quits unexpectedely when seeking an mp3 with the ZinfClassic skin
esa [EMAIL PROTECTED] writes: Package: zinf Version: 2.2.5-5 Severity: normal Can you please provide a backtrace, obtained by gdb: $ gdb zinf (gdb) run [ zinf is now running - provoke the crash, and you should see the gdb prompt again ] (gdb) bt [ here will be the backtrace ] Thanks, Rotty -- Andreas Rottmann | [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] http://yi.org/rotty | GnuPG Key: http://yi.org/rotty/gpg.asc Fingerprint | DFB4 4EB4 78A4 5EEE 6219 F228 F92F CFC5 01FD 5B62 Life is a sexually transmitted disease. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294725: Acknowledgement (k3b hangs then crashes on startup)
severity 294725 normal retitle 294725 k3b crashes on startup unless started by root thanks mate :) Hi, I have just realised that whatever k3b is doing when it crashes on startup, it doesn't do that when I run it as root. So that's not as bad, though clearly it isn't ideal either. Sorry for the hassle of having a mistitled bug with the wrong severity submitted at you. Thanks again, Helen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294724: set-language-env doesn't show Cyrillic characters in UTF-8 locale
I will test the solution at the next upload of the package. Currently there is no Debian (and no GNU/Linux) box near me. Best regards: al_shopov -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294130: README.mailman: Multiple databases should now be possible
On 08/02/2005 Julian Mehnle wrote: README.mailman says: | As long as lurker doesn't support multible databases per instance, you | have to archive either all private lists, all public lists or both with | lurker. I don't have any experience with older versions of lurker, but I see that there is a dbdir option in lurker's config file, so I would guess that the current version of lurker actually _does_ support multiple databases, provided that multiple config files are used. that's correct indeed, but you'll have to install seperate instances of lurkers binary to configure different htdocs (webcache) directories as well. therefore i see currently no possibility to run more than one lurker instance with the debian lurker package installation. if you need to split the archive into private and public lists, please contact [EMAIL PROTECTED] I've already requested this feature, but there are still some residual issues that have to be settled. If this is correct, it should be possible to create separate archives for individual private lists or for individual sites (groups), and README.mailman should be fixed not to give a wrong impression. (Maybe even instructions on how to set this up could be given.) nice idea, any i'dd be glad to see suggestions for the documentation as soon as multible instances are supported. the biggest problem is how to connect these two archives? do you need to have access to all lists in the private area? or would you split the archives without any connection? what about that situation: you have 5 public and 5 private lists. now the first private list has 20 subscribers, second, third and fourth each 30 and the fifth private list has 40 subscribers. remember, you need a unique account for every subscriber of every list. every private list would need a seperate private lurker instance here, wouldn't it? to make it even more complicated, what about people who have access to more than one private list? should they have one account for all, or one account for each of the lists? i was prosperous if lurker would have support for multible instances. bye jonas -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#293932: [Python-Dev] license issues with profiler.py and md5.h/md5c.c
Donovan Baarda writes: On Tue, 2005-02-08 at 11:52 -0800, Gregory P. Smith wrote: The md5.h/md5c.c files allow copy and use, but no modification of the files. There are some alternative implementations, i.e. in glibc, openssl, so a replacement should be sage. Any other requirements when considering a replacement? One thing to consider is degree of difficulty :-) Matthias I believe the plan for md5 and sha1 and such is to use the much faster openssl versions in the future (based on a long thread debating future interfaces to such things on python-dev last summer). That'll sidestep any tedious license issue and give a better implementation at the same time. i don't believe anyone has taken the time to make such a patch yet. I wasn't around for that discussion. There are two viable replacements for the RSA implementation currently used; libmd http://www.penguin.cz/~mhi/libmd/ openssl http://www.openssl.org/. The libmd implementation is by Colin Plumb and has the licence; This code is in the public domain; do with it what you wish. The API is identical to the RSA implementation and BSD world's libmd and hence is a drop in replacement. This implementation is faster than the RSA implementation. [...] Currently md5c.c is included in the python sources. The libmd implementation has a drop in replacement for md5c.c. The openssl implementation is a complicated tangle of Makefile expanded template code that would be harder to include in the Python sources. I would prefer that one as a short term solution. Patch at #1118602. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#149278: Reduce Spam
Never worry about Spyware again! Protection is easy with Spy-Control. In minutes, you can identify and remove all malicious infections. Spy-Control provides absolute Spyware elimination and prevention - our Live Montoring Shield will stop Spyware before it reaches your PC, the smart Popup Blocker will make sure you are not harassed by commercials, and you'll get full access to our Helpdesk where our capable support staff will be glad to assist you with every question you might have. Avoid Credit Card Fraud Protect Privacy Personal Information Prevent Identity Theft Reduce Spam Increase PC and Internet Speeds End Home Page Hijacking Never see a Popup again http://www.deletespyware.info/?aid=187 Spy-Control is the most widely used and trusted Spyware protection program in the world. Installed on over 13 million PC's and trusted by some of the world's largest companies- with Spy-Control, you can be certain you are getting the best protection available today! http://www.deletespyware.info/?aid=187 Find out how many Spyware Agents are watching you right now! No More http://www.deletespyware.info/discon
Bug#294734: [l10n] Initial Czech translation of wmsun debconf messages
Package: wmsun Severity: wishlist Tags: l10n, patch Hi, in attachement there is initial Czech (cs.po) translation of wmsun debconf messages. Please include it. Thanks -- Miroslav Kure # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: wmsun\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2004-03-08 16:37+0100\n PO-Revision-Date: 2005-02-11 12:46+0100\n Last-Translator: Miroslav Kure [EMAIL PROTECTED]\n Language-Team: Czech [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=ISO-8859-2\n Content-Transfer-Encoding: 8bit\n #. Type: string #. Description #: ../templates:3 msgid Please enter the latitude of the observer. msgstr Zadejte zempisnou ku pozorovatele. #. Type: string #. Description #: ../templates:3 msgid You have to enter your latitude for wmSun to work correctly. You may find it out at http://www.calle.com/world/, positive is northern hemisphere, negative is southern hemisphere. If you don't know your latitude at this moment, leave the input field blank and run `dpkg-reconfigure wmsun' later. msgstr Aby wmSun pracoval sprvn, muste zadat svou zempisnou ku. Zjistit ji mete teba na http://www.calle.com/world/ (severn polokoule m sla kladn, jin zporn). Pokud nyn svou zempisnou ku neznte, nezadvejte nic a pozdji spuste `dpkg-reconfigure wmsun'. #. Type: string #. Description #: ../templates:3 msgid Note that this configuration applies only to the X menu system. If you call wmSun from a terminal prompt you can supply the `-lat' option. msgstr Toto nastaven se tk pouze sputn z menu. Zavolte-li wmSun z terminlu, mete zadat parametr `-lat'. #. Type: string #. Description #: ../templates:16 msgid Please enter the longitude of the observer. msgstr Zadejte zempisnou dlku pozorovatele. #. Type: string #. Description #: ../templates:16 msgid You have to enter your longitude for wmSun to work correctly. You may find it out at http://www.calle.com/world/. Greenwich is 0.0, and longitude increases positively toward the west. Alternatively, negative numbers can also be used to specify longitudes to the east of Greenwich. If you don't know your longitude at this moment, leave the input field blank and run `dpkg-reconfigure wmsun' later. msgstr Aby wmSun pracoval sprvn, muste zadat svou zempisnou dlku. Zjistit ji mete teba na http://www.calle.com/world/. Greenwich m hodnotu 0.0, smrem na zpad se dlka zvtuje. Voliteln mete zadat i zpornou hodnotu, kter zna dlky na vchod od Greenwiche. Pokud nyn svou zempisnou dlku neznte, nezadvejte nic a pozdji spuste `dpkg-reconfigure wmsun'. #. Type: string #. Description #: ../templates:16 msgid Note that this configuration applies only to the X menu system. If you call wmSun from a terminal prompt you can supply the `-lon' option. msgstr Toto nastaven se tk pouze sputn z menu. Zavolte-li wmSun z terminlu, mete zadat parametr `-lon'.
Bug#294733: [l10n] Initial Czech translation of wmmonclock debconf messages
Package: wmmoonclock Severity: wishlist Tags: l10n, patch Hi, in attachement there is initial Czech (cs.po) translation of wmmoonclock debconf messages. Please include it. Thanks -- Miroslav Kure # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: wmmoonclock\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2004-03-08 16:29+0100\n PO-Revision-Date: 2005-02-11 12:39+0100\n Last-Translator: Miroslav Kure [EMAIL PROTECTED]\n Language-Team: Czech [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=ISO-8859-2\n Content-Transfer-Encoding: 8bit\n #. Type: string #. Description #: ../templates:3 msgid Please enter the latitude of the observer. msgstr Zadejte zempisnou ku pozorovatele. #. Type: string #. Description #: ../templates:3 msgid You have to enter your latitude for wmMoonClock to work correctly. You may find it out at http://www.calle.com/world/, positive is northern hemisphere, negative is southern hemisphere. If you don't know your latitude at this moment, leave the input field blank and run `dpkg-reconfigure wmmoonclock' later. msgstr Aby wmMoonClock pracoval sprvn, muste zadat svou zempisnou ku. Zjistit ji mete teba na http://www.calle.com/world/ (severn polokoule m sla kladn, jin zporn). Pokud nyn svou zempisnou ku neznte, nezadvejte nic a pozdji spuste `dpkg-reconfigure wmmoonclock'. #. Type: string #. Description #: ../templates:3 msgid Note that this configuration applies only to the X menu system. If you call wmMoonClock from a terminal prompt you can supply the `-lat' option. msgstr Toto nastaven se tk pouze sputn z menu. Zavolte-li wmMoonClock z terminlu, mete zadat parametr `-lat'. #. Type: string #. Description #: ../templates:16 msgid Please enter the longitude of the observer. msgstr Zadejte zempisnou dlku pozorovatele. #. Type: string #. Description #: ../templates:16 msgid You have to enter your longitude for wmMoonClock to work correctly. You may find it out at http://www.calle.com/world/. Greenwich is 0.0, and longitude increases positively toward the west. Alternatively, negative numbers can also be used to specify longitudes to the east of Greenwich. If you don't know your longitude at this moment, leave the input field blank and run `dpkg-reconfigure wmmoonclock' later. msgstr Aby wmMoonClock pracoval sprvn, muste zadat svou zempisnou dlku. Zjistit ji mete teba na http://www.calle.com/world/. Greenwich m hodnotu 0.0, smrem na zpad se dlka zvtuje. Voliteln mete zadat i zpornou hodnotu, kter zna dlky na vchod od Greenwiche. Pokud nyn svou zempisnou dlku neznte, nezadvejte nic a pozdji spuste `dpkg-reconfigure wmmoonclock'. #. Type: string #. Description #: ../templates:16 msgid Note that this configuration applies only to the X menu system. If you call wmMoonClock from a terminal prompt you can supply the `-lon' option. msgstr Toto nastaven se tk pouze sputn z menu. Zavolte-li wmMoonClock z terminlu, mete zadat parametr `-lon'.
Bug#294732: apt experimental 0.6.25 depends on obsolete libapt-pkg-perl 0.1.11.2 and blocks testing packages
Package: apt Version: 0.6.25 Severity: normal Tags: experimental Since experimental apt gives release signature checking it seems quite widely used. Unfortunately it depends on long obsolete libapt-pkg-perl: $ apt-cache policy libapt-pkg-perl libapt-pkg-perl: Zainstalowana: 0.1.11.2 Kandydujca: 0.1.13 Tabela wersji: 0.1.13 0 990 ftp://ftp.debian.org testing/main Packages 500 ftp://ftp.debian.org unstable/main Packages *** 0.1.11.2 0 100 /var/lib/dpkg/status This blocks all packages depending on libapt-pkg-perl: Directly: localization-config apt-src apt-show-versions apt-rdepends apt-file apt-build And many others indirectly. -- Package-specific info: -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.8-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) (ignored: LC_ALL set to pl_PL) Versions of packages apt depends on: ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libgcc1 1:3.4.3-6GCC support library ii libstdc++5 1:3.3.5-5The GNU Standard C++ Library v3 -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294730: FTBFS on kfreebsd-gnu
Package: zziplib Version: 0.12.83-1 Severity: wishlist This package needs a config.{guess,sub} and libtool update in order to build on kfreebsd-gnu. The former is preferably done automaticaly, and for the latter see the comments in #242950. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: kfreebsd-i386 (i686) Kernel: GNU/kFreeBSD 5.3-3 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#267485: does not work with apps like debconf -fgnome
Marco Tlio Gontijo e Silva wrote: Does it still happen with the latest versions of libgnome2-perl, debconf and gtk2-engines-highcontrast? I cannot reproduce that anymore. Another thing is that the links should have another color, the dark blue is almost unvisible, and, in evolution even when the message is plain text it's shown white, while every other thing is black. I'm afraid the blue color for the links is hardcoded somewhere. I'll have to check that. Regards, -- .''`. Josselin Mouette/\./\ : :' : [EMAIL PROTECTED] `. `'[EMAIL PROTECTED] `- Debian GNU/Linux -- The power of freedom -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294741: Foreign characters lost at start (Bad UTF-8 decoding)
Package: tomcat4 Version: 4.1.31-2 Severity: important I updated from 4.1.30-6. I'm using Tomcat 4.1.31-2, Blackdown j2sdk1.4.1 on an uptodate Sarge server with Kernel 2.6.8-13. When we boot the server, some applications using Tomcat4 have a wrong UTF-8 encoding when the starting process is over and apche/tomcat ready to serve request. If I do /etc/init.d/tomcat4 restart all come back as normal. I have no special message in catalina logs. I have this in /etc/default/tomcat4 CATALINA_OPTS=-Duser.language=EN -Duser.region=FR Any idea? Sincerely, Stef... ... . Linux - Debian - php4 - JAVA/Tomcat - MySQL - Infogerance . . email: [EMAIL PROTECTED] - http://www.actionweb.fr/ . . Tel: (0)141 906 100-Fax: (0)141 906 101. ... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294738: php4: bad dependencies
Package: php4 Version: 4:4.3.10-2 Severity: important Hello, It seems when I'm trying to install php4 it has unmet dependencies, for some reason only the php4 package is version 4:4.3.10-3 and all the packages (even php4 packages) the it includes on are 4:4.3.10-4, did anyone update ONLY the php4 package by mistake? (the reason you see I have 4.3.10-2 installed is because the newer versions didnt install due to this bug). Thanks, Nir Peled -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.8-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages php4 depends on: ii libapache-mod-php44:4.3.10-2 server-side, HTML-embedded scripti ii libapache2-mod-php4 4:4.3.10-2 server-side, HTML-embedded scripti ii php4-common 4:4.3.10-2 Common files for packages built fr -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294736: kernel-package: only postinst/rm scripts get =D and co substituted, while preinst/rm do not ...
Package: kernel-package Version: 8.119 Severity: important Something really strange showed up while i was experimenting with the kernel-package script hooks. It works fine for postinst/postrm : my $version = 2.6.10-power4; my $link_in_boot = ; # Should be empty, mostly my $no_symlink= ; # Should be empty, mostly my $reverse_symlink = ; # Should be empty, mostly my $do_symlink= Yes; # target machine defined my $do_boot_enable= Yes; # target machine defined my $do_bootfloppy = Yes; # target machine defined my $do_bootloader = Yes; # target machine defined my $move_image= ''; # target machine defined my $kimage= vmlinux; # Should be empty, mostly my $loader= quik; # lilo, silo, quik, palo, vmelilo, nettrom, arcboot or delo my $image_dir = /boot;# where the image is located my $clobber_modules = ''; # target machine defined my $relative_links= ; # target machine defined my $initrd= Yes;# initrd kernel my $mkimage = ;# command to generate the initrd image my $do_initrd = ''; # Normally we do not my $warn_initrd = 'YES'; # Normally we do my $use_hard_links= ''; # hardlinks do not work across fs boundaries my $postinst_hook = ''; #Normally we do not my $postrm_hook = ''; #Normally we do not my $preinst_hook = ''; #Normally we do not my $prerm_hook= ''; #Normally we do not my $minimal_swap = ''; # Do not swap symlinks my $ignore_depmod_err = ''; # normally we do not my $relink_src_link = 'YES'; # There is no harm in checking the link my $relink_build_link = 'YES'; # There is no harm in checking the link my $force_build_link = ''; # There is no harm in checking the link my $official_image= YES; # only true for official images my $arch= powerpc; # should be same as dpkg --print-installation-architecture But fails on preinst/prerm : # Predefined values: my $version = 2.6.10-power4; my $link_in_boot = =B; # Should be empty, mostly my $no_symlink = =S; # Should be empty, mostly my $reverse_symlink = =R; # Should be empty, mostly my $do_symlinks = Yes;# target machine defined my $do_boot_enable = Yes;# target machine defined my $do_bootfloppy = Yes;# target machine defined my $do_bootloader = Yes;# target machine defined my $move_image = ''; # target machine defined my $kimage = =K; # Should be empty, mostly my $loader = quik; # lilo, silo, quik, palo, vmelilo, or nettrom my $image_dir = =D; # where the image is located my $clobber_modules = ''; # target machine defined my $mkimage = ;# command to generate the initrd image my $initrd = =I; # initrd kernel my $use_hard_links = ''; # hardlinks do not wirk across fs boundaries my $postinst_hook = ''; #Normally we do not my $postrm_hook = ''; #Normally we do not my $preinst_hook= ''; #Normally we do not my $prerm_hook = ''; #Normally we do not my $minimal_swap= ''; # Do not swap symlinks my $ignore_depmod_err = ''; # normally we do not my $relink_build_link = 'YES'; # There is no harm in checking the link my $force_build_link = ''; # There is no harm in checking the link my $official_image= YES; # only true for official images Since i wanted to use the $1/$2 provided option to the prerm script, which resulted in a /=D/vmlinux-2.6.10-power4 path, it obviously failed. After looking at : /usr/share/kernel-package/rules, it is obvious why this happens, since preinst/prerm only get a subset of the = variables substituted. I am not sure if this is a mistake or intentional though. The current kernel-package/rules code is : sed -e 's/=V/$(version)/g'-e 's/=B/$(link_in_boot)/g' \ -e 's/=S/$(no_symlink)/g' -e 's/=R/$(reverse_symlink)/g' \ -e 's/=K/$(kimage)/g' -e 's/=L/$(loader)/g' \ -e 's/=I/$(INITRD)/g' -e 's,=D,$(IMAGEDIR),g'\ -e '[EMAIL PROTECTED]@$(MKIMAGE)@g'-e 's/=OF/$(AM_OFFICIAL)/g' \ -e '[EMAIL PROTECTED]@$(DEB_HOST_ARCH)@g' \ -e 's/=ST/$(INT_STEM)/g'\ $(DEBDIR)/image.postinst $(IMAGE_TOP)/DEBIAN/postinst chmod 755 $(IMAGE_TOP)/DEBIAN/postinst sed -e 's/=V/$(version)/g'-e 's/=B/$(link_in_boot)/g' \ -e 's/=S/$(no_symlink)/g' -e 's/=R/$(reverse_symlink)/g' \ -e 's/=K/$(kimage)/g' -e 's/=L/$(loader)/g' \ -e 's/=I/$(INITRD)/g' -e 's,=D,$(IMAGEDIR),g'\
Bug#294737: hardcodes /bin/netstat
Package: apache2-common Version: 2.0.53-3 Severity: normal /var/lib/dpkg/info/apache2-common.postinst: line 17: /bin/netstat: No such file or directory apache2-common assumes netstat is in /bin which is not always true. Please don't use absolute paths. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: kfreebsd-i386 (i686) Kernel: GNU/kFreeBSD 5.3-3 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Versions of packages apache2-common depends on: ii apache2-utils2.0.53-3utility programs for webservers ii debconf 1.4.45 Debian configuration management sy ii debianutils 2.11.2 Miscellaneous utilities specific t ii inetutils-tools 2:1.4.2+20040207-4+kbsd Base networking utilities (experim ii libc0.1 2.3-1+kbsd.8GNU C Library: Shared libraries an ii libdb4.2 4.2.52-15 Berkeley v4.2 Database Libraries [ ii libgcc1 1:3.4.1-5+kbsd GCC support library ii libmagic14.12-1 File type determination library us ii mime-support 3.29-1 MIME files 'mime.types' 'mailcap ii openssl 0.9.7e-2+kbsd Secure Socket Layer (SSL) binary a ii ssl-cert 1.0-11 Simple debconf wrapper for openssl -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294739: FTBFS on kfreebsd-gnu (libtool)
Package: oaf Version: 0.6.10-3 Severity: wishlist Please could you relibtoolise this package? See bug #242950 for details. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: kfreebsd-i386 (i686) Kernel: GNU/kFreeBSD 5.3-3 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294740: /usr/bin/php4: preg_match() throws pcre_fullinfo() errors
Package: php4-cli Version: 4:4.3.10-3 Severity: important File: /usr/bin/php4 After upgrading php4 packages today, I'm left with a setup that refuses to run preg_match() in PHP scripts. The resulting error message is Warning: preg_match: internal pcre_fullinfo() error -3 in [file] on line [line]. This issue seems -very- similar, if not completely the same, to bug #280823. The PCRE version as reported by phpinfo() is 3.9 02-Jan-2002, which strikes me as odd. Another box (running testing instead of unstable) reports 4.5 01-December-2003. Hopefully, this bug is as easy to stomp as the one mentioned above... -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages php4-cli depends on: ii libbz2-1.0 1.0.2-4 high-quality block-sorting file co ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libcomerr2 1.36release-1 common error description library ii libdb4.2 4.2.52-18 Berkeley v4.2 Database Libraries [ ii libexpat1 1.95.8-1 XML parsing C library - runtime li ii libkrb53 1.3.6-1 MIT Kerberos runtime libraries ii libmagic1 4.12-1File type determination library us ii libncurses55.4-4 Shared libraries for terminal hand ii libpcre3 4.5-1.1 Perl 5 Compatible Regular Expressi ii libssl0.9.70.9.7e-3 SSL shared libraries ii libzzip-0-12 0.12.83-1 library providing read access on Z ii mime-support 3.29-1MIME files 'mime.types' 'mailcap ii php4-common4:4.3.10-3Common files for packages built fr ii zlib1g 1:1.2.2-4 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#292448: aucun objet
Package: tomcat4 Version: 4.1.31-2 Severity: normal I have the same problem. If a context is declared in web.xml but the directory/files are not present in the webapps of the vhost, Tomcat start and crash without error message. If we remove the missing context, all is fine. I didn't have this problem with 4.1.30-6. Sincerely, Stef... ... . Linux - Debian - php4 - JAVA/Tomcat - MySQL - Infogerance . . email: [EMAIL PROTECTED] - http://www.actionweb.fr/ . . Tel: (0)141 906 100-Fax: (0)141 906 101. ... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294743: smbfs: Generates many error message about gencache.tdb wenn mounting Windows2000 share
Package: smbfs Version: 3.0.10-1 Severity: minor Hello, we got many error messages like this in the syslog of our amanda backup server when we mount shares of Windows2000 servers via smbfs. Feb 11 12:54:18 mps8 mount.smbfs[10751]: [2005/02/11 12:54:18, 0] tdb/tdbutil.c:tdb_log(725) Feb 11 12:54:18 mps8 mount.smbfs[10751]: tdb(/var/run/samba/gencache.tdb): tdb_lock failed on list 34 ltype=1 (Ungültiger Dateideskripto r) English: (invalid files descriptor) gencache.tbd ist existing and tdbbackup reports no errors: MPS8:/var/run/samba# ls -l insgesamt 33 -rw-r--r-- 1 root root 696 2005-02-11 13:07 brlock.tdb -rw-r--r-- 1 root root 8192 2005-02-11 13:07 connections.tdb -rw-r--r-- 1 root root 8192 2005-02-03 14:56 gencache.tdb -rw-r--r-- 1 root root 696 2005-02-11 13:07 locking.tdb -rw--- 1 root root 696 2005-02-03 14:56 messages.tdb -rw-r--r-- 1 root root 3524 2005-02-06 06:25 namelist.debug -rw-r--r-- 1 root root4 2005-02-03 14:56 nmbd.pid -rw-r--r-- 1 root root 696 2005-02-11 13:07 sessionid.tdb -rw-r--r-- 1 root root 8192 2005-02-03 14:56 unexpected.tdb MPS8:/var/run/samba# tdbbackup -v gencache.tdb gencache.tdb : 4 records The error occurs regular, mostly every 2 hours. Then we got something arround 150 messages in one minute. We have 9 lines like this in our /etc/fstab: //mps-axaptadb.mps.gleich/D$/mnt-backup-mps-axaptadb-D smbfs defaults,username=backup,password=x,lfs,gid=backup,dmask= 755 0 0 We have moved 18 GB of files up to 5 GB between these Shares, without data corruption. So it seems to me, that there is no problem exept this annoying messages. Can you please remove this messages, if you also think there is no real problem. Thank, Martin -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages smbfs depends on: ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libcomerr2 1.35-6 The Common Error Description libra ii libkrb531.3.6-1 MIT Kerberos runtime libraries ii libldap22.1.30-3 OpenLDAP libraries ii netbase 4.19 Basic TCP/IP networking system ii samba-common3.0.10-1 Samba common files used by both th -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294742: ships obsolete /usr/lib/cgi-bin/doc-central/cgiutils.py
Package: doc-central Version: 1.7 Severity: minor hello, for me it seems like /usr/lib/cgi-bin/doc-central/cgiutils.py is obsolete. it's a python module that isn't loaded by any python executable in /usr/lib/cgi-bin/. therefore i believe that the module is simply not used by doc-central any more, and can be dropped. what do you think? bye jonas -- System Information: Debian Release: 3.1 Architecture: amd64 (x86_64) Kernel: Linux 2.6.10-2-amd64 Locale: LANG=C, [EMAIL PROTECTED] (charmap=UTF-8) Versions of packages doc-central depends on: ii apache [httpd]1.3.33-4 versatile, high-performance HTTP s ii info2www 1.2.2.9-23 Read info files with a WWW browser ii python2.3.4-6An interactive high-level object-o -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294744: liborbit-dev should depend on liborbit0
Package: orbit Version: 0.5.17 liborbit-dev should depend on orbit0 for the shared objects. A simple 'liborbit0 (= ${Source-Version})' will probably do just fine. Robin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294732: apt experimental 0.6.25 depends on obsolete libapt-pkg-perl 0.1.11.2 and blocks testing packages
On Friday, February 11, 2005 11:56 AM, Michal J. Gajda [EMAIL PROTECTED] wrote: Package: apt Version: 0.6.25 Severity: normal Tags: experimental Since experimental apt gives release signature checking it seems quite widely used. Unfortunately it depends on long obsolete libapt-pkg-perl: [...] This blocks all packages depending on libapt-pkg-perl: Erm... AFAICS, you have this entirely back-to-front. apt *does* *not* depend on libapt-pkg-perl; quite the opposite, in fact. apt provides a virtual package which specifies its API version. The version of apt in unstable provides libapt-pkg-libc6.3-5-3.3, whereas the version of experimental provides libapt-pkg-libc6.3-5-3.5. The latest version of libapt-pkg-perl (which is maintained by the perl maintainer, not the apt maintainers) still depends on libapt-pkg-libc6.3-5-3.3, which is quite correct as the package in unstable must use the same API version as the apt in unstable. IMHO, this bug should either be closed or reassigned to libapt-pkg-perl as a wishlist request for an upload to experimental that depends on the new API. Regards, Adam -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294488: Ubuntu patch
tag 294488 patch thanks Here is the patch used for the Ubuntu security update: http://patches.ubuntu.com/patches/awstats.more-CAN-2005-0016.diff awstats (6.2-1.1ubuntu1) hoary; urgency=low . * SECURITY UPDATE: fix more arbitrary command execution vulnerabilities * wwwroot/cgi-bin/awstats.pl: remove all non-path characters from the config, pluginmode, loadplugin, and noloadplugin parameters (which are defined by the remote user) to prevent execution of arbitrary shell commands through shell metacharacters. * References: similar to CAN-2005-0116 http://packetstormsecurity.nl/0501-exploits/AWStatsVulnAnalysis.pdf Martin -- Martin Pitt http://www.piware.de Ubuntu Developerhttp://www.ubuntulinux.org Debian GNU/Linux Developer http://www.debian.org signature.asc Description: Digital signature
Bug#290857: backport fix from the 2.6.9 kernel
Do you plan to backport the fix present in the bug report? I think that it may also fix bug 274167. A problem in mm/filemap.c may corrupt almost all filesystems. Rafael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294745: Add the aide reference database file last update's time and date in reports
Package: aide Version: 0.10-4 Severity: wishlist The last time and date of the reference database file (the one generated manually) of AIDE should be in the reports to be able to check if it has been changed abnormally. I will submit a patch soon. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages aide depends on: ii debconf 1.4.30.11Debian configuration management sy ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii mailutils [mailx] 1:0.6-2 GNU mailutils utilities for handli -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#217256: netselect: 0% - 9999 : more info
Package: netselect Version: 0.3.ds1-3 Followup-For: Bug #217256 Hello ! I also got the same problem as previoulsy reported, namely: I can ping hosts, but netselect reports that the hosts are down: gaia ~ $ ping -vv ftp.fr.debian.org PING ftp.fr.debian.org (212.27.32.66) 56(84) bytes of data. 64 bytes from debian.proxad.net (212.27.32.66): icmp_seq=1 ttl=55 time=9.58 ms 64 bytes from debian.proxad.net (212.27.32.66): icmp_seq=2 ttl=55 time=5.09 ms --- ftp.fr.debian.org ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1000ms rtt min/avg/max/mdev = 5.092/7.339/9.586/2.247 ms gaia ~ $ netselect -vv ftp.fr.debian.org Running netselect to choose 1 out of 1 address. ftp.fr.debian.org ms 30 hops0% ok I think this is mainly due to the fact that I'm hosted behind an aggressive (and stupid) firewall. I don't know exactly what goes through, but I can tell you this: UDP doesn't come, whichever the situation; only outbound TCP connections are allowed; Obviouly, ping probes do work, so I don't really know what to say. Could the problems come from this ?? Would there be any workaround ? Vincent Fourmond -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages netselect depends on: ii debconf [debconf-2.0] 1.4.45 Debian configuration management sy ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an -- debconf information: * netselect/install-setuid: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#293932: [Python-Dev] license issues with profiler.py and md5.h/md5c.c
On Fri, 11 Feb 2005 12:55:02 +0100, Matthias Klose [EMAIL PROTECTED] wrote: Currently md5c.c is included in the python sources. The libmd implementation has a drop in replacement for md5c.c. The openssl implementation is a complicated tangle of Makefile expanded template code that would be harder to include in the Python sources. I would prefer that one as a short term solution. Patch at #1118602. Unfortunately a license that says it is in the public domain is unacceptable (and should be for Debian, too). That is to say, it's not possible for someone to claim that something they produce is in the public domain. See http://www.linuxjournal.com/article/6225 Jeremy -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294732: apt experimental 0.6.25 depends on obsolete libapt-pkg-perl 0.1.11.2 and blocks testing packages
# BTS control commands package apt severity 294732 wishlist retitle 294732 Please provide a package supporting apt/experimental reassign 294732 libapt-pkg-perl thanks On Friday, February 11, 2005 12:38 PM, Michal J. Gajda [EMAIL PROTECTED] wrote: Adam D. Barratt napisa(a): On Friday, February 11, 2005 11:56 AM, Michal J. Gajda [EMAIL PROTECTED] wrote: [...] Since experimental apt gives release signature checking it seems quite widely used. Unfortunately it depends on long obsolete libapt-pkg-perl: [...] Erm... AFAICS, you have this entirely back-to-front. apt *does* *not* depend on libapt-pkg-perl; quite the opposite, in fact. [...] IMHO, this bug should either be closed or reassigned to libapt-pkg-perl as a wishlist request for an upload to experimental that depends on the new API. Thanks a lot for explanation. Please reassign, as I don't think I have rights for this. Anyone can reassign bugs, but I'll do so for you. Retitled and reassigned with this message. Regards, Adam -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294746: libantlr-dev is empty
Package: libantlr-dev Version: 2.7.5-1 file list from the package: drwxr-xr-x root/root 0 2005-02-02 19:30:13 ./ drwxr-xr-x root/root 0 2005-02-02 19:30:10 ./usr/ drwxr-xr-x root/root 0 2005-02-02 19:30:10 ./usr/share/ drwxr-xr-x root/root 0 2005-02-02 19:30:10 ./usr/share/doc/ drwxr-xr-x root/root 0 2005-02-02 19:30:13 ./usr/share/doc/libantlr-dev/ -rw-r--r-- root/root 1202 2005-02-02 19:29:58 ./usr/share/doc/libantlr-dev/copyright -rw-r--r-- root/root 2033 2005-02-02 19:29:58 ./usr/share/doc/libantlr-dev/changelog.Debian.gz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294714: gcalctool: does not obey operator precedence
severity 294714 wishlist merge 294714 248499 thanks Le vendredi 11 février 2005 à 10:04 +, David Vrabel a écrit : Package: gcalctool Version: 4.4.20-1 Severity: normal gnome-calculator does not obey operator precedence when performing calculations. e.g., it calculates 1 + 2 * 3 = 9 instead of the expected 1 + 2 * 3 = 7. Hi, That's not a bug, according to the website (http://calctool.sourceforge.net/): One of the most important things to remember about calctool is that calculations are performed from left to right, with no arithmetic precedence. If you need arithmetic precedence, then you should use parentheses. The devel is working on a new branch with arithmetic precedence, so this bug should be fixed in the next versions. Cheers, Sebastien Bacher
Bug#294740: Additional info
Just had a look at the changelogs for apache2 (which was updated from 2.0.52-3 to 2.0.53-3 at the same time the PHP update took place), and I noticed that the change in PCRE-related terms. Maybe this isn't a PHP issue, but an Apache issue. If so, should I file another bug report, or could this one be transferred? Max -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294505: Fw: Bug#294505: Rhythmbox error when upgrade
No, It appears when I upgraded the hole system. When I do this I stop the xsever and do it by console. Ok, please run: update-desktop-database as root, and tell me if it produces the same warning. The message is: # update-desktop-database File '/usr/share/applications/sodipodi.desktop' contains invalid MIME type 'image/svg+xml,image/svg' that contains invalid characters[Invalid UTF-8] Could not parse file '/usr/share/applications/alc.desktop': desktop entry contain line 'Comment[fr]=Cr\xe9ateur de liens ed2k d'aMule' which is not UTF-8 Please copy your whole /etc/apt/sources.list in this bug report. deb http://http.us.debian.org/debian unstable main contrib non-free deb http://non-us.debian.org/debian-non-US unstable/non-US main contrib non-free I installed mplayer and w32codecs from: #deb ftp://ftp.nerim.net/debian-marillat/ unstable main I installed Sylpheed-claws-gtk2 from: #deb http://http.us.debian.org/debian/ ../project/experimental main contrib non-free -- Savio Martins Ramos - Arquiteto Rio de Janeiro ICQ 174972645 Pirataria não! Seja livre: Linux http://www.debian.org
Bug#294505: Fw: Bug#294505: Rhythmbox error when upgrade
On Thu, 10 Feb 2005 18:31:48 +0100 Loïc Minier [EMAIL PROTECTED] wrote: Hi, Savio Ramos [EMAIL PROTECTED] - Thu, Feb 10, 2005: No, It appears when I upgraded the hole system. When I do this I stop the xsever and do it by console. Ok, please run: update-desktop-database as root, and tell me if it produces the same warning. The message is: # update-desktop-database File '/usr/share/applications/sodipodi.desktop' contains invalid MIME type 'image/svg+xml,image/svg' that contains invalid characters[Invalid UTF-8] Could not parse file '/usr/share/applications/alc.desktop': desktop entry contain line 'Comment[fr]=Cr\xe9ateur de liens ed2k d'aMule' which is not UTF-8 Please copy your whole /etc/apt/sources.list in this bug report. I installed mplayer and w32codecs from: #deb ftp://ftp.nerim.net/debian-marillat/ unstable main I installed Sylpheed-claws-gtk2 from: #deb http://http.us.debian.org/debian/ ../project/experimental main contrib non-free After that, I only upgraded the system from: deb http://http.us.debian.org/debian unstable main contrib non-free deb http://non-us.debian.org/debian-non-US unstable/non-US main contrib non-free -- Savio Martins Ramos - Arquiteto Rio de Janeiro ICQ 174972645 Pirataria não! Seja livre: Linux http://www.debian.org
Bug#294567: php4-auth-pam sets RPATH
Hi, where does the strace come from? What did Matt do to get it? I can't reproduce any problem. And can you please point me to an archive of the discussion you talk about? I would like to see, what Matt wrote, too. Thank you, Carsten pgpuLcrrAgzIn.pgp Description: PGP signature
Bug#294668: faqomatic: Maintenance job fails if HOST contains a dash
Hello Ruediger, What's Ruediger Blach talkin' 'bout, Willis? If the value of the HOST variable in `/var/lib/fom/meta/maintenance_job_conf' contains a dash, `/usr/share/perl5/FAQ/OMatic/Debian.pm' fails: Thanks for reporting this. I will ask my sponsor to upload a corrected package today once I have double checked it. Looks similar to bug #291305. Similar, it dies in a later test but yes, it's the same idea. Thanks once again, jereme -- Jereme Corrado [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294751: FTBFS: cannot build powerpc 2.6 kernels, missing rule for conf.vars
Package: kernel-package Version: 8.120 Severity: serious Justification: FTBFS As said, i am not able to build the powerpc 2.6.10 kernel package with this, while building it with my 8.119 + versioned script hack worked fine : cd /home/sven/debian/kernel/build/kernel-patch-powerpc-2.6.10-2.6.10/tmp/kernel-source-2.6.10; APPEND_TO_VERSION='' make-kpkg configure make[1]: Entering directory `/home/sven/debian/kernel/build/kernel-patch-powerpc-2.6.10-2.6.10/tmp/kernel-source-2.6.10' # work around idiocy in recent kernel versions test ! -e scripts/package/builddeb || \ mv -f scripts/package/builddeb scripts/package/builddeb.dist test ! -e scripts/package/Makefile || \ (mv -f scripts/package/Makefile scripts/package/Makefile.dist \ echo # Dummy filescripts/package/Makefile) test ! -f stamp-debian test ! -f debian/official \ rm -rf ./debian mkdir ./debian make[1]: [stamp-debian] Error 1 (ignored) test ! -f stamp-debian \ ( test ! -f debian/official || test ! -f debian/control) \ sed -e 's/=V/2.6.10/g'-e 's/=D/2.6.10-2/g' \ -e 's/=A/powerpc/g' -e 's/=SA//g' \ -e 's/=L/quik, /g' -e 's/=I/initrd-tools (= 0.1.48), /g'\ -e 's/=CV/2.6/g' \ -e 's/=M/Unknown Kernel Package Maintainer [EMAIL PROTECTED]/g'\ -e 's/=ST/kernel/g' \ /usr/share/kernel-package/Control debian/control make[1]: [stamp-debian] Error 1 (ignored) test ! -f stamp-debian test ! -f debian/official \ sed -e 's/=V/2.6.10/g' -e 's/=D/2.6.10-2/g' \ -e 's/=A/powerpc/g' -e 's/=M/Unknown Kernel Package Maintainer [EMAIL PROTECTED]/g' \ -e 's/=ST/kernel/g' \ /usr/share/kernel-package/changelog debian/changelog make[1]: [stamp-debian] Error 1 (ignored) test ! -f debian/rules\ install -p -m 755 /usr/share/kernel-package/rules debian/rules echo done stamp-debian make[1]: *** No rule to make target `conf.vars', needed by `stamp-configure'. Stop. make[1]: Leaving directory `/home/sven/debian/kernel/build/kernel-patch-powerpc-2.6.10-2.6.10/tmp/kernel-source-2.6.10' make: *** [stamp-configure] Error 2 Hope you can find what is broken here :) -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Kernel: Linux 2.6.8-powerpc Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages kernel-package depends on: ii dpkg 1.10.26 Package maintenance system for Deb ii dpkg-dev 1.10.26 Package building tools for Debian ii gcc [c-compiler] 4:3.3.5-1 The GNU C compiler ii gcc-2.95 [c-compiler]1:2.95.4-22 The GNU C compiler ii gcc-3.3 [c-compiler] 1:3.3.5-8 The GNU C compiler ii make 3.80-9 The GNU version of the make util ii perl 5.8.4-6 Larry Wall's Practical Extraction -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294749: [l10n] Initial Czech translation of tpctl debconf messages
Package: tpctl Severity: wishlist Tags: l10n, patch Hi, in attachement there is initial Czech (cs.po) translation of tpctl debconf templates, please include it. Thanks -- Miroslav Kure # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: tpctl\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2003-12-06 23:29+0100\n PO-Revision-Date: 2005-02-11 14:14+0100\n Last-Translator: Miroslav Kure [EMAIL PROTECTED]\n Language-Team: Czech [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=ISO-8859-2\n Content-Transfer-Encoding: 8bit\n #. Type: note #. Description #: ../templates:3 msgid Requires a thinkpad-modules-x.y.z package msgstr Vyadovn balk thinkpad-modules-x.y.z #. Type: note #. Description #: ../templates:3 msgid In order to for tpctl to work you need to install a package containing driver modules for certain thinkpad devices. The package is called \thinkpad-modules-x.y.z\ where \x.y.z\ indicates the kernel version for which the drivers are built. If you do not find a package in the Debian archive that has been built for your kernel then you must build one yourself from the sources provided in the thinkpad-source package, using the make- kpkg utility (which comes in the kernel-package package). msgstr Aby tpctl vbec pracoval, muste mt nainstalovn balk obsahujc ovladae pro nkter zazen v thinkpadech. Balk se jmenuje \thinkpad-modules-x.y.z\, kde \x.y.z\ znamen verzi jdra, pro kterou jsou ovladae ureny. Pokud v archivu Debianu nenaleznete balk, kter by odpovdal verzi vaeho jdra, muste si jej sestavit ze zdrojovch kd v balku thinkpad-source nstrojem make-kpkg (z balku kernel-package). #. Type: note #. Description #: ../templates:14 msgid apmiser installed msgstr apmiser nainstalovn #. Type: note #. Description #: ../templates:14 msgid Installing the automatic power-saving daemon, apmiser, along with the initscript /etc/init.d/apmiser. The daemon uses tpctl to switch the machine between \high\ and \auto\matic power expenditure modes according to degree of CPU utilization. See the apmiser man page and the README file for more information. msgstr Do /etc/init.d/apmiser jsem nainstaloval skript, kter automaticky spout daemona pro eten energie, apmiser. Podle stupn zaten procesoru pepn daemon mezi reimy sprvy napjen \high\ a \auto\. K samotnmu pepnn vyuv prv nstroj tpctl. Vce informac naleznete v manulov strnce programu apmiser, nebo v souboru README.
Bug#294747: [l10n] Initial Czech translation of tpb debconf messages
Package: tpb Severity: wishlist Tags: l10n, patch Hi, in attachement there is initial Czech (cs.po) translation of tpb debconf templates, please include it. Thanks -- Miroslav Kure # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: tpb\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2004-08-19 16:56+0200\n PO-Revision-Date: 2005-02-11 13:15+0100\n Last-Translator: Miroslav Kure [EMAIL PROTECTED]\n Language-Team: Czech [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=ISO-8859-2\n Content-Transfer-Encoding: 8bit\n #. Type: note #. Description #: ../tpb.templates:3 msgid Group for tpb users changed! msgstr Skupina pro uivatele tpb se zmnila! #. Type: note #. Description #: ../tpb.templates:3 msgid The group of the device file used by tpb changed. Note that you have to move the tpb users from the old group \thinkpad\ to the new group \nvram\! msgstr U souboru zazen pouvanho programem tpb se zmnila skupina. To znamen, e budete muset pesunout uivatele ze skupiny \thinkpad\ do skupiny \nvram\. #. Type: boolean #. Description #: ../tpb.templates:10 msgid Create special device file? msgstr Vytvoit speciln soubor zazen? #. Type: boolean #. Description #: ../tpb.templates:10 msgid tpb needs a special device file to access the information about pressed buttons. Users who should be able to use tpb must be in the group nvram. msgstr tpb potebuje pro pstup k informacm o stisknutch tlatcch speciln soubor zazen. Uivatel, kte chtj pouvat tpb, mus bt leny skupiny nvram. #. Type: boolean #. Description #: ../tpb.templates:17 msgid Start tpb automatically? msgstr Spustit tpb automaticky? #. Type: boolean #. Description #: ../tpb.templates:17 msgid tpb can be started automatically after X has been started for a user. That can be either after startx from console or after login with a display manager. msgstr tpb se me spustit automaticky po pihlen uivatele do X Window Systemu (a u pkazem startx nebo pihlenm pes grafickho sprvce obrazovky).
Bug#294748: [l10n] Initial Czech translation of tpconfig debconf messages
Package: tpconfig Severity: wishlist Tags: l10n, patch Hi, in attachement there is initial Czech (cs.po) translation of tpconfig debconf templates, please include it. Thanks -- Miroslav Kure # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: tpconfig\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2003-07-09 06:10+0200\n PO-Revision-Date: 2005-02-11 14:01+0100\n Last-Translator: Miroslav Kure [EMAIL PROTECTED]\n Language-Team: Czech [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=ISO-8859-2\n Content-Transfer-Encoding: 8bit\n #. Description #: ../templates:4 msgid Manage tpconfig configuration file with debconf? msgstr Spravovat konfiguran soubor tpconfigu pes debconf? #. Description #: ../templates:4 msgid The tpconfig configuration file, \/etc/default/tpconfig\, can be handled automatically by debconf, or manually by you. msgstr Konfiguran soubor tpconfigu \/etc/default/tpconfig\ mete spravovat bu run, nebo programem debconf. #. Description #: ../templates:11 msgid Reset the touchpad when booting? msgstr Resetovat touchpad pi zavdn? #. Description #: ../templates:11 msgid Some machines do not reset the touchpad hardware when they are booted and/or resumed. On these machines, it is necessary to manually reset the touchpad. Accept here to do a manual reset when the system is started or resumed. Refuse if you don't want this. msgstr Nkter potae pi zavdn / vzbuzen neresetuj hardware touchpadu. Na takovch strojch je teba touchpad resetovat run. Chcete-li, aby se reset provedl pi kadm startu / probuzen systmu, odpovzte ano. #. Description #: ../templates:19 msgid Options to pass to tpconfig when booting: msgstr Parametry, kter se maj pi zavdn pedat tpconfigu: #. Description #: ../templates:19 msgid Specify any command-line options you want passed to tpconfig at boot or resume time. (Note that if you specified above that the touchpad is to be reset, then it will be reset first, and then any options specified here done after.) For example, one common option is \--tapmode=0\, which tells the touchpad to disable \tapping\, to prevent spurious mouse events being caused by accidentally brushing against the touchpad. msgstr Zadejte ppadn parametry, kter chcete tpconfigu peedat pi zavdn nebo probuzen systmu. (Pokud jste dve zadali, e se m touchpad resetovat, bude nejprve resetovn a pot se nastav zadan paramtery.) ast parametr je teba \--tapmode=0\, m zakete \poklepn\ a vyhnete se tak omylm pi nechtnm nrazu do touchpadu.
Bug#285284: More info
Hi Could you please give us the precise error message you get from mount? I suspect that it is caused by this line [ -d /proc/1 ] || mount -n /proc But that this doesn't work for you seems strange. ciao, 2ri -- Secure email, spread GPG, clearsign all mail. http://www.gnupg.org . VI. This Is Religion, Boy. Not Comparison Bloody Shopping! You Shall Not Subject Your God To Market Forces! -- Terry Pratchett in Small Gods -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294750: kaffe -vmdebug
Package: kaffe Version: 2:1.1.4.PRECVS6-1 Severity: minor According to the man page, ``kaffe -vmdebug list'' should display a list of debugging options. However it results in: java.lang.ClassNotFoundException: list at java.lang.Class.forName (Class.java) at java.lang.Class.forName (Class.java:44) -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (700, 'testing'), (600, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.6-2-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages kaffe depends on: ii kaffe-pthreads 2:1.1.4.PRECVS6-1 A POSIX threads enabled version of -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294481: ghci -lpthread fails
On Fri, Feb 11, 2005 at 11:27:21AM -, Simon Marlow wrote: On 10 February 2005 23:35, Ian Lynagh wrote: I'm no library expert, so there may be a cleaner/simpler/more portable equivalent to the above. I'm not that familiar with libtool, but I guess what you're doing here is creating a dummy shared library which is linked against -lpthread, and linking that into GHCi? Yup. I don't see any reason why we couldn't automate the process, except that getting all the fiddly details right would probably be a nightmare. Like I say, I'm no expert either :-( And would you require libtool to be installed? What about other platforms - Mac OS X? If the necessary bits aren't available then you can fall back to acting like -optl-foo and are no worse off than currently. I think libtool is supposed to take care of the portability side for you, so hopefully lots of special casing won't be necessary. I don't know how well that works in practice, though. Thanks Ian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294507: gnucash: crashes while printing transaction report
On Thu, Feb 10, 2005 at 03:06:27PM -0800, Thomas Bushnell BSG wrote: Marvin Renich [EMAIL PROTECTED] writes: If I create a transaction report, then print it to the default printer, gnucash crashes (window and process disappear); printing to a file does not crash (and the resulting postscript file can be printed normally). Can you confirm whether this happens with the latest gnucash packages? I just tried it with 1.8.10-5 from unstable, and it still crashes. I didn't see any version in experimental. ...Marvin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]