wicd en panne
depuis la dernière mise à jour, wicd ne marche plus. L'installation de la dernière version stable ne résout pas le problème . Je vais essayer la version instable. pmd
Re: wicd en panne [RESOLUÿ
Le Sunday 20 January 2008 10:57:24 debianpmd, vous avez écrit : depuis la dernière mise à jour, wicd ne marche plus. L'installation de la dernière version stable ne résout pas le problème . Je vais essayer la version instable. pmd --- Orange vous informe que cet e-mail a ete controle par l'anti-virus mail. Aucun virus connu a ce jour par nos services n'a ete detecte. en fait, un update upgrade résout le problème (j'ai vu passer des paquets python), avec donc la dernière version (semble plus pratique, plus de possibilités, en particulier connexion automatique possible). Comme quoi il faut toujours garder son vieil interfaces en secours ;-) pmd
lecture carte mémoire appareil photo
Bonjour, mon ordinateur possède le lecteur de disquettes faisant également lecteur de cartes mémoire de différents formats. Je n'arrive pas à m'en servir, bien que j'aie déjà réussi dans le passé, mais je ne me souvient plus comment. Il me semble que ce périph est détecté, puisque: $ cat /proc/bus/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=055d ProdID=3010 Rev= 1.06 S: Manufacturer=Samsung Electro-Mechanics Co., LTD. S: Product=FlashMemoryCard Drive S: SerialNumber=6D8EBCAF1D C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms ... Mais comment faire à partir de là pour l'accéder ? Merci de votre aide.
Re: lecture carte mémoire appareil photo
salut, Mais comment faire à partir de là pour l'accéder ? Je dirai qu'il faut monter ton device. Que dit dmesg lorsque tu inserts ton lecteur 36 en 1 ? f. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sauvegarde étape installation
Le Friday 18 January 2008 14:59:34 François TOURDE, vous avez écrit : Le 13896ième jour après Epoch, Haji Kader écrivait: Le Friday 18 January 2008 11:45:50 François TOURDE, vous avez écrit : Le 13896ième jour après Epoch, [...] Le mot-clef est preseed... C'est un fichier sur le CD d'install qui permet de donner des réponses par défaut lors de l'install. Sur le partitionnement par exemple, ou la liste des paquets à installer, etc. Bonne info, j'ai jeté un coup et c'est exactement ce que je cherchais. Merci, Avec plaisir. Il y a eu pas mal de fils à ce sujet-là, je te recommande de fouiller les archives. Sans faute, encore merci. Cordialement. -- Kader HAJI Héonium
Re: lecture carte mémoire appareil photo
fabrice régnier wrote: salut, Mais comment faire à partir de là pour l'accéder ? Je dirai qu'il faut monter ton device. Oui, mais j'ai eu beau chercher, pas une entrée de /dev ne semble correspondre. Que dit dmesg lorsque tu inserts ton lecteur 36 en 1 ? Tu veux dire, lorsque j'insère une carte dedans ? car le lecteur est fixe (c'est la même boite que le lecteur de D7). Et bien, dmesg ne dit rien, pas plus que udevmonitor, ou que toute autre source d'infos que j'ai pu regarder.
Re: lecture carte mémoire appareil photo
Le 13898ième jour après Epoch, Alexandre Gerussi écrivait: fabrice régnier wrote: salut, Mais comment faire à partir de là pour l'accéder ? Je dirai qu'il faut monter ton device. Oui, mais j'ai eu beau chercher, pas une entrée de /dev ne semble correspondre. Que dit dmesg lorsque tu inserts ton lecteur 36 en 1 ? Tu veux dire, lorsque j'insère une carte dedans ? car le lecteur est fixe (c'est la même boite que le lecteur de D7). Et bien, dmesg ne dit rien, pas plus que udevmonitor, ou que toute autre source d'infos que j'ai pu regarder. Alors que dit dmesg quand tu branches le lecteur en question? Ça semblerait étonnant qu'il trouve qque chose si tu ne mets pas de carte dedans, mais on sait jamais. Tu peux aussi insérer d'abord une carte, puis brancher le lecteur en question. C'est bien un lecteur externe, genre USB, c'est ça ? -- Qui n'a pas recherché la vérité, n'a bien sûr jamais commis d'erreurs. -+- Mikhail Saltykov-Chtchedrine (1826-1889) -+-
[un peu HS] comment graver une image de CD au format dmg ?
Bonjour, Je cherche une solution pour graver un CD au format dmg (de Mac Os X) sous linux... Est-ce possible de convertir ce fichier en iso pour le fournir à k3b ? Merci @ + Mourad -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ATTENTION: MISE À JOUR XSERVER-XORG-CORE BUGGÉ
Gaëtan PERRIER a écrit : Le Sat, 19 Jan 2008 13:28:58 +0100 dPailler [EMAIL PROTECTED] a écrit: Depuis ce matin je n'accédé plus à vlc, c'est du à la dernière mise à jour : 2:1.1.1-21etch2 pour réglé le pb: dans synaptic: paquet --- forcer la version 2:1.1.1-21etch1 et redémarrage du serveurX Tu parles de quelle version de Debian? Gaëtan etch, mais de toutes façons le bug est corrigé. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: lecture carte mémoire appareil photo
François TOURDE wrote: Tu peux aussi insérer d'abord une carte, puis brancher le lecteur en question. C'est bien un lecteur externe, genre USB, c'est ça ? J'ai du mal me faire comprendre. C'est un lecteur *interne*, genre lecteur de disquette monté dans une tour... C'est vrai que du coup, je ne comprend pas bien pourquoi il est pris en charge par usb-storage, mais bon, mes connaissances sont plutot floues.
Re: [Un peu HS] Restreindre l'utilisation d'un programme
On Sun, 20 Jan 2008 17:37:11 +0100, Pascal Ognibene [EMAIL PROTECTED] wrote: Bonjour à tous, Bonsoir, Je souhaite restreindre l'utilisation de certains programmes - typiquement des jeux - sur les PC (debian SID) de mes enfants. Par exemple, possibilité d'exécuter un programme X pendant maximum une heure le mercredi, le samedi et le dimanche. Une fois le quota dépassé, le programme est terminé de manière autoritaire et il est impossible de le relancer jusqu'à la prochaine date valide. Savez-vous si une telle possibilité existe sous debian? Le module pam_time pourrait t'aider en partie à verrouiller l'accès au ressources. http://www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/sag-pam_time.html Je pense que c'est à essayer :p! --- Franck Joncourt http://www.debian.org/ - http://smhteam.info/wiki/ -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[Un peu HS] Restreindre l'utilisation d'un programme
Bonjour à tous, Je souhaite restreindre l'utilisation de certains programmes - typiquement des jeux - sur les PC (debian SID) de mes enfants. Par exemple, possibilité d'exécuter un programme X pendant maximum une heure le mercredi, le samedi et le dimanche. Une fois le quota dépassé, le programme est terminé de manière autoritaire et il est impossible de le relancer jusqu'à la prochaine date valide. Savez-vous si une telle possibilité existe sous debian? Merci. Pascal
Re: Etch: wifi
On Sun, 20 Jan 2008 18:02:58 +0100, lili [EMAIL PROTECTED] wrote: Pourriez vous SVP me dire ou je peux recuperer les messages de ce forums ? http://www.debian.org/MailingLists/subscribe --- Franck Joncourt http://www.debian.org/ - http://smhteam.info/wiki/ -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Etch: wifi
Bonjour, Voila petit papa Noel m'as envoyer un jolie Portable HP ou j'ai installer Etch. Pourriez vous SVP me dire ou je peux recuperer les messages de ce forums ? Merci -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Choix d'une imprimante multi-fonction
Bonjour les gens Je souhaite acheté une imprimante multi-fonction bien supportée. Ce qui m'interesse, c'est d'imprimer et scanner facilement. Le reste c'est secondaire. Avez vous des conseils sur le choix d'une imprimante (en dessous de 150 euros) qui serrait bien gérée sous debian ? Merci à tous -- Bonnetot Jean-Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Choix d'une imprimante multi-fonction
GouNiNi a écrit : Bonjour les gens Je souhaite acheté une imprimante multi-fonction bien supportée. Ce qui m'interesse, c'est d'imprimer et scanner facilement. Le reste c'est secondaire. Avez vous des conseils sur le choix d'une imprimante (en dessous de 150 euros) qui serrait bien gérée sous debian ? Merci à tous Bonsoir, Je me suis offert celle-çi pour Noël: http://www.grosbill.com/4-brother_dcp_750cw_wifi-50305-peripheriques-imprimante_multifonction Les drivers Debian (LPR, CUPS et brscan2) sont disponibles sur le site Brother. Marche nickel :) -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: lecture carte mémoire appareil photo
C'est un lecteur *interne*, genre lecteur de disquette monté dans une tour... okok. Sans être original, je lancerai un livecd pour voir comment est traité ton périphérique (interne, j'ai bien compris maintenant ;) ) f. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: lecture carte mémoir e appareil photo
On Sun, Jan 20, 2008 at 02:56:05PM +0100, Alexandre Gerussi wrote: François TOURDE wrote: Tu peux aussi insérer d'abord une carte, puis brancher le lecteur en question. C'est bien un lecteur externe, genre USB, c'est ça ? J'ai du mal me faire comprendre. C'est un lecteur *interne*, genre lecteur de disquette monté dans une tour... C'est vrai que du coup, je ne comprend pas bien pourquoi il est pris en charge par usb-storage, mais bon, mes connaissances sont plutot floues. /var/log/messages n'est pas très bavard dans ce cas. Pour m'y retrouver, je fais : sudo fdisk -l /dev/sda sudo fdisk -l /dev/sdb sudo fdisk -l /dev/sdc ... jusqu'à ce que je tombe sur le bon device. A+ -- Pierre Meurisse -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[etch]nvidia : récurent certes mais avec nvidia-glx-legacy-dev !
bonjour, j'imagine que cela doit commencer à agacer de toujours voir des post avec des problèmes nvidia, mais j'ai l'impression que vouloir utiliser nvidia sous notre os préféré est fortement problématique (pour quelqu'un comme moi, c'est le cas) je suis sous etch, et j'ai un très mauvais souvenir d'utilisation de *legacy-96xx* avec une entrée 'unstable' dans mon source list pour la présentation : lspci | grep -i vga : 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) j'ai suivi les derniers posts concernant les vieilles nvidia (legacy), mais j'appréhende les méthodes citées car elles nécessitent a chaque upgrade noyau ou xorg de tout recompiler, et vu mes erreurs passée sur le sujet (que je dois traîner encore dans ma config ), j'aimerais éviter. avant de poster j'avais cru trouver la solution propre et debian ... mais non : aptitude install nvidia-glx-legacy-dev nvidia-kernel-legacy-2.6-k7 ne m'on posé aucun soucis (retrait de truc en mesa-* mais cela n'a pas l'air de poser problème au lancement d'une nouvelle session xorg avec le pilote nv ... j'ai toujours le repli en nv qui fonctionne ... ouf !) dans mon xorg je modifie le nv en nvidia, j'ouvre une nouvelle session (log dans /var/log/Xorg.20.log : grep EE /var/log/Xorg.20.log (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (II) Loading extension MIT-SCREEN-SAVER (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X (EE) NVIDIA(0): log file that the GLX module has been loaded in your X (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If (EE) NVIDIA(0): you continue to encounter problems, Please try (EE) NVIDIA(0): reinstalling the NVIDIA driver. (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure (EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and (EE) NVIDIA(0): that the NVIDIA device files have been created properly. (EE) NVIDIA(0): Please consult the NVIDIA README for details. (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration. pourtant grep -i glx /var/log/Xorg.20.log | grep -v EE (II) LoadModule: glx (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor=NVIDIA Corporation (II) Loading extension GLX pour info : lsmod | grep nv nvidia 3929708 0 agpgart30216 2 nvidia,sis_agp file /usr/lib/libGL.so /usr/lib/libGL.so: broken symbolic link to `libGL.so.1.0.7184'
Re: Choix d'une imprimante multi-fonction
GouNiNi wrote: Avez vous des conseils sur le choix d'une imprimante (en dessous de 150 euros) qui serrait bien gérée sous debian ? La série des HP PSC (printer/scanner/copier) est bien supportée, mais je ne sais pas s'il y a des modèles dans tes prix.
Re: [Un peu HS] Restreindre l'utilisation d'un programme
Je souhaite restreindre l'utilisation de certains programmes - typiquement des jeux - sur les PC (debian SID) de mes enfants. Par exemple, possibilité d'exécuter un programme X pendant maximum une heure le mercredi, le samedi et le dimanche. Une fois le quota dépassé, le programme est terminé de manière autoritaire et il est impossible de le relancer jusqu'à la prochaine date valide. Savez-vous si une telle possibilité existe sous debian? Le module pam_time pourrait t'aider en partie à verrouiller l'accès au ressources. http://www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/sag-pam_time.html Je pense que c'est à essayer :p! Pour limiter le temps d'utilisation, pam_time me semble un bonne solution également. Si tu souhaites cadrer un peu plus l'utilisation du PC par tes enfants et que tu utilises Gnome, regardes du côté de *Pessulus* et de *Sabayon* pour verrouiller la configuration du bureau. Par exemple, tu peux configurer la listes des logiciels du menu Applications et ensuite verrouiller les panels pour interdire les modifications ultérieurs (si tu veux aller plus loin, le menu Applications est en fait un fichier XML - applications.menu - respectant la norme *FreeDesktop.Org* - cf le site de Gnome pour apprendre à la modifier pour chaque utilisateur). Enfin, tu veux réellement bloquer l'utilisation d'une application à un utilisateur ou à un groupe d'utilisateurs, utilises des *ACL POSIX* (il y a un très bon tuto sur LeaLinux). Guillaume.
Re: [Un peu HS] Restreindre l'utilisation d'un programme
On Sun, 20 Jan 2008 19:27:18 +0100, Guillaume MESSONNIER [EMAIL PROTECTED] wrote: Je souhaite restreindre l'utilisation de certains programmes - typiquement des jeux - sur les PC (debian SID) de mes enfants. Par exemple, possibilité d'exécuter un programme X pendant maximum une heure le mercredi, le samedi et le dimanche. Une fois le quota dépassé, le programme est terminé de manière autoritaire et il est impossible de le relancer jusqu'à la prochaine date valide. Savez-vous si une telle possibilité existe sous debian? Le module pam_time pourrait t'aider en partie à verrouiller l'accès au ressources. http://www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/sag-pam_time.html Je pense que c'est à essayer :p! Pour limiter le temps d'utilisation, pam_time me semble un bonne solution également. Je cite la page du module : [quote] Note, currently there is no daemon enforcing the end of a session. This needs to be remedied. [/quote] Une fois une application lancée elle resterait active même après expiration de la période d'accès. Ce que j'en comprend est qu'il n'est pas possible de mettre fin à l'utilisation d'une application. Non ? --- Franck Joncourt http://www.debian.org/ - http://smhteam.info/wiki/ -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: lecture carte mémoire appareil photo
/var/log/messages n'est pas très bavard dans ce cas. Pour m'y retrouver, je fais : sudo fdisk -l /dev/sda sudo fdisk -l /dev/sdb sudo fdisk -l /dev/sdc ... Justement, et je crois que mon problème est lié, je n'ai plus aucun fichier sd* dans mon /dev... Pourtant il n'y a pas si longtemps j'en avais et je crois me rappeler que c'est par là que j'accédais au lecteur de cartes. A propos, /var/log/messages indique: Jan 20 09:55:41 Melville kernel: Initializing USB Mass Storage driver... Jan 20 09:55:41 Melville kernel: scsi0 : SCSI emulation for USB Mass Storage devices Jan 20 09:55:41 Melville kernel: usbcore: registered new interface driver usb-storage Jan 20 09:55:41 Melville kernel: USB Mass Storage support registered. ... Jan 20 09:55:56 Melville kernel: usb 1-1: reset full speed USB device using uhci_hcd and address 3 Jan 20 09:55:57 Melville kernel: scsi 0:0:0:0: scsi: Device offlined - not ready after error recovery Je ne sais pas si c'est lié, mais il semble y avoir un prob ???
suscribe
-- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [Un peu HS] Restreindre l'utilisation d'un programme
Bonsoir, Le dimanche 20 janvier 2008 à 19:56 +0100, Franck JONCOURT a écrit : On Sun, 20 Jan 2008 19:27:18 +0100, Guillaume MESSONNIER [EMAIL PROTECTED] wrote: Je souhaite restreindre l'utilisation de certains programmes - typiquement des jeux - sur les PC (debian SID) de mes enfants. Par exemple, possibilité d'exécuter un programme X pendant maximum une heure le mercredi, le samedi et le dimanche. Une fois le quota dépassé, le programme est terminé de manière autoritaire et il est impossible de le relancer jusqu'à la prochaine date valide. [...] Pour limiter le temps d'utilisation, pam_time me semble un bonne solution également. Je cite la page du module : [quote] Note, currently there is no daemon enforcing the end of a session. This needs to be remedied. [/quote] Une fois une application lancée elle resterait active même après expiration de la période d'accès. Ce que j'en comprend est qu'il n'est pas possible de mettre fin à l'utilisation d'une application. Non ? PAM gère l'ouverture de session, et ne gère donc pas l'utilisation des applications elles-mêmes. Workrave (que je découvre) pourrait peut-être répondre partiellement à ton besoin : http://www.workrave.org/welcome/ Je n'ai pas étudié en détails, mais ça pourrait d'ailleurs répondre à mes propres besoins ;-) Je serais intéressé par des retours d'expérience ! Julien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [Un peu HS] Restreindre l'utilisation d'un programme
Le Sun, 20 Jan 2008 19:56:16 +0100 Franck JONCOURT [EMAIL PROTECTED] a écrit : On Sun, 20 Jan 2008 19:27:18 +0100, Guillaume MESSONNIER [EMAIL PROTECTED] wrote: Je souhaite restreindre l'utilisation de certains programmes - typiquement des jeux - sur les PC (debian SID) de mes enfants. Par exemple, possibilité d'exécuter un programme X pendant maximum une heure le mercredi, le samedi et le dimanche. Une fois le quota dépassé, le programme est terminé de manière autoritaire et il est impossible de le relancer jusqu'à la prochaine date valide. Savez-vous si une telle possibilité existe sous debian? Le module pam_time pourrait t'aider en partie à verrouiller l'accès au ressources. http://www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/sag-pam_time.html Je pense que c'est à essayer :p! Pour limiter le temps d'utilisation, pam_time me semble un bonne solution également. Je cite la page du module : [quote] Note, currently there is no daemon enforcing the end of a session. This needs to be remedied. [/quote] Une fois une application lancée elle resterait active même après expiration de la période d'accès. Ce que j'en comprend est qu'il n'est pas possible de mettre fin à l'utilisation d'une application. Non ? Si, c'est possible avec un petit script qui se lance d'une manière autonome et qui va chercher le PID du programme et dès qu'il le trouve, lance un compteur et à l'issue duquel l'application est tuée. Cordialement --- Franck Joncourt http://www.debian.org/ - http://smhteam.info/wiki/ -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
HS : Stabilié d'une communiquation WiFi.
Bonsoir, J'ai un portable Packard-Bell EasyNote avec une carte Wifi à base d'un chipset Atheros. J'ai installé MadWifi sur mon kernel 2.6.22, j'ai configuré une connexion en wpa-psk. Sur mon D-Link 624, j'ai configuré la partie Wifi pour utiliser le même type d'encryption. Cela fonctionne correctement sauf. Sauf que j'ai des pertes de connexion temps à autre. Je n'ai pas trouvé de constante de temps mais j'ai remarqué que cela se produit plus régulièrement si le nombre de paquets transmis augmente comme un mise à jour debian ou un transfert en p2p. Généralement un simple /etc/init.d/network restart rétablit la situation mais de temps en temps je suis obligé de rédémarrer le routeur. Quelqu'un aurait un retour d'expérience sur les cartes Atheros ou les routeur Dlink en wifi ? Merci. -- Thierry Leurent E-mail : [EMAIL PROTECTED] Website (en developpement) : http://www.asgardian.be
Re: Problema con dist-upgrade (pantalla)
2008/1/19, Fernando [EMAIL PROTECTED]: Hola listeros, les comento un poco mi problema, yo tenia instalado debian en su rama unstable, cuestión que cada vez que actualizaba siempre tenia algún problema de dependencias de cosas que dejaban de funcionar, etc.. Por ello fue que decidí volver a testing. Luego de ejecutar el dist-upgrade y solucionar todos los problemas de dependencias logre por fin volver sin problemas. Pero al reiniciar el linux, noto que me aparece una línea de 1px de ancho y que cruza la pantalla verticalmente de punta a punta de color rosa que a veces cambia a verde :| busque busque pero no logro solucionarlo, esta linea me aparece tanto en la consola como en las X, si alguno paso por esto, tirenme una soga gracias. ¿Se ve también durante el arranque de la BIOS? Prueba a arrancar el PC con un livecd o un liveusb, o el propio instalador de debian, para descartar que el problema no es el sistema operativo. Puede que tengas el problema en el monitor, el cable o la tarjeta gráfica. Si durante el arranque no ves la línea de 1px, entonces es posible que el problema sea del driver de tu tarjeta... y que estés usando ftamebuffer, porque si no no entiendo el que se vea también en consola. Saludos
Re: Instalacion en portatil
2008/1/19, Isabel Diaz [EMAIL PROTECTED]: Ante todo gracias por contestar: Ya he leido los Howto, (lei todo cuanto pude antes de mandar el correo) y los cd que me he bajado son para 64 bits. pero no consigo nada con las opciones de booteo noapic nolapic irqpoll noirqdebug. Da igual que las ponga como que no, En los manuales que he encontrado solo se habla de estas opciones.. ¿Hay alguna mas que deba incluir? Es un tema sobre hardware muy específico, pero por si te sirve, aquí tienes la lista de parámetros que soporta el kernel... que son unos cuantos: http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.23.y.git;a=blob_plain;f=Documentation/kernel-parameters.txt;hb=0ebc8ca802af6a8b6c5d311a4a7250aa5d7d3625 Saludos
Re: Recuperar MBR o tabla de particiones.
El 20/01/08, francisco [EMAIL PROTECTED] escribió: Hola a todos Antecedentes: Tengo un DD Seagate de 320 GB con datos y 1 sola particion; no recuerdo si la cree con cfdisk de Slackware u otro; si estoy seguro que no fue con Debian, ya que para usar cfdisk en Testing, que es el que uso, hay que poner tilde o cambiar el LANG_ES; este DD funcionaba perfectamente como DD externo; luego mi socia tuvo la brillante idea de conectarlo a Windows Vista (Laptop Compaq) y adios MBR y todo. ¿pero le dio formato o se jodió solo por enchufarlo? Cosas hechas: Con Testdisk, analice a la primera y no tuve ningun resultado; luego cambie la geometria, probe 255 y 240 H y nada; luego probe a mover las cantidades de CHS para obtener los 320 GB; pero en este punto, estoy totalmente perdido. Preguntas: Cual seria el punto de inicio que sea fijo en relacion a CHS, como para que reconozca correctamente el particionado? he probado 63; pero no me reconoce la particion. Sería bueno ponerle la misma geometría que tenía cuando funcionaba. Conoce alguno de uds. un metodo mas efectivo para recrear el MBR o la tabla de particiones? ¿backup? :) La única vez que utilicé testdisk me salvó el pellejo. Como podria identificar que FS hay en la particion? Desde linux y como root: fdisk -l /dev/sd[letra] Muchas gracias. Mucha suerte :-S
Re: Recuperar MBR o tabla de particiones.
El dom, 20-01-2008 a las 11:00 +0100, Iñigo Tejedor Arrondo escribió: El 20/01/08, francisco [EMAIL PROTECTED] escribió: Hola a todos Antecedentes: Tengo un DD Seagate de 320 GB con datos y 1 sola particion; no recuerdo si la cree con cfdisk de Slackware u otro; si estoy seguro que no fue con Debian, ya que para usar cfdisk en Testing, que es el que uso, hay que poner tilde o cambiar el LANG_ES; este DD funcionaba perfectamente como DD externo; luego mi socia tuvo la brillante idea de conectarlo a Windows Vista (Laptop Compaq) y adios MBR y todo. ¿pero le dio formato o se jodió solo por enchufarlo? Creo que intento abrir archivos! Supongo que no lo ha formateado, creo que no sabe como hacerlo. Cosas hechas: Con Testdisk, analice a la primera y no tuve ningun resultado; luego cambie la geometria, probe 255 y 240 H y nada; luego probe a mover las cantidades de CHS para obtener los 320 GB; pero en este punto, estoy totalmente perdido. Preguntas: Cual seria el punto de inicio que sea fijo en relacion a CHS, como para que reconozca correctamente el particionado? he probado 63; pero no me reconoce la particion. Sería bueno ponerle la misma geometría que tenía cuando funcionaba. Si, pero no la se con certeza, no recuerdo con que cree la particion, me parece que con cfdisk de Slackware; y no recuerdo si es ext3 o reiser; he probado con testdisk: 320 GB 255 H 63 S pero no encuentra la particion. sfdisk me dice 267349 C 255 H 63 S, en total 2199 GB. lo que es absurdo. Conoce alguno de uds. un metodo mas efectivo para recrear el MBR o la tabla de particiones? ¿backup? :) Si, lo tenia del MBR, pero se fue a manos ajenas. La única vez que utilicé testdisk me salvó el pellejo. Yo creo que es de lo mejor, a mi tambien me ha salvado varias veces; pero esta vez, el problema es la geometria desconocida! Como podria identificar que FS hay en la particion? Desde linux y como root: fdisk -l /dev/sd[letra] debian:/home/francisco# fdisk -l /dev/sdb Disco /dev/sdb: 2199.0 GB, 219902322 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cilindros of 16065 * 512 = 8225280 bytes Disk identifier: 0x90209020 El disco /dev/sdb no contiene una tabla de particiones válida Muchas gracias. Mucha suerte :-S Gracias, la necesito! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Recuperar MBR o tabla de particiones.
El Sun, 20 Jan 2008 05:13:58 -0800 francisco [EMAIL PROTECTED] escribió: El disco /dev/sdb no contiene una tabla de particiones válida Si no recuerdo mal testdisk puede intentar descubrir qué particiones existen en el disco y, a partir de ahí, recrear la tabla de particiones. Tan sólo lo he usado una vez, con un disco con varias particiones NTFS, y a mí me funcionó. Saludos y suerte. -- Manolo Díaz
Intentando instalar Grub (empaquetado por Debian)
Hola lista: Tengo dos distribuciones instaladas en mi disco duro. Fedora 8 y Debian Lenny. El caso es que primeramente instale Fedora y está grabo Grub en el sector de arranque. Necesito instalar el Grub que viene con Debian (el empaquetado de Debian).Ya se que puedo utilizar el de Fedora, de hecho lo estoy haciendo actualmente, pero por temas de virtualización con Xen necesito el Grub de Debian. Por favor me podrían echar una mano. No tengo el arból de directorios de grub en /boot/ del sistema Debian por lo que tendría que crearlo y macharcar el Grub a Fedora, pero no encuentro como hacerlo. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Consulta sobre amsn 0.97
Hola Amigos: Despues de unas festividades, les envío un saludo desde Colombia. Feliz navidad y Año 2008 Bueno, la consulta es acerca de la instalación del amsn, cuando descargo la última versión el archivo que se baja es amsn-0.97RC1-1.tcl84.x86.package Como lo instalo? mi debian es etch. Ya intenté estas cosas: Gabo:/mnt# chmod 777 amsn-0.97RC1-1.tcl84.x86.package Gabo:/mnt# ./amsn-0.97RC1-1.tcl84.x86.package bash: ./amsn-0.97RC1-1.tcl84.x86.package: /bin/bash: bad interpreter: Permiso denegado Gabo:/mnt# dpkg -i amsn-0.97RC1-1.tcl84.x86.package dpkg-deb: `amsn-0.97RC1-1.tcl84.x86.package' no es un archivo en formato debian dpkg: error al procesar amsn-0.97RC1-1.tcl84.x86.package (--install): el subproceso dpkg-deb --control devolvió el código de salida de error 2 Se encontraron errores al procesar: amsn-0.97RC1-1.tcl84.x86.package Gracias
Re: Consulta sobre amsn 0.97
Gabo escribió: Hola Amigos: Despues de unas festividades, les envío un saludo desde Colombia. Feliz navidad y Año 2008 Bueno, la consulta es acerca de la instalación del amsn, cuando descargo la última versión el archivo que se baja es amsn-0.97RC1-1.tcl84.x86.package Como lo instalo? mi debian es etch. Ya intenté estas cosas: Gabo:/mnt# chmod 777 amsn-0.97RC1-1.tcl84.x86.package Gabo:/mnt# ./amsn-0.97RC1-1.tcl84.x86.package bash: ./amsn-0.97RC1-1.tcl84.x86.package: /bin/bash: bad interpreter: Permiso denegado Gabo:/mnt# dpkg -i amsn-0.97RC1-1.tcl84.x86.package dpkg-deb: `amsn-0.97RC1-1.tcl84.x86.package' no es un archivo en formato debian dpkg: error al procesar amsn-0.97RC1-1.tcl84.x86.package (--install): el subproceso dpkg-deb --control devolvió el código de salida de error 2 Se encontraron errores al procesar: amsn-0.97RC1-1.tcl84.x86.package Gracias http://www.autopackage.org/docs/howto-install/ saludos -- _ Key ID :0x2B16BF9B21E4B3B5 hkp://wwwkeys.eu.pgp.net Telefono:(raspar aqui) | -- No soy un experto en Linux sino un simple aficcionado en busca del nirvana Debian :-). signature.asc Description: OpenPGP digital signature
Re: Consulta sobre amsn 0.97
El 20/01/08, Gabo [EMAIL PROTECTED] escribió: Hola Amigos: Despues de unas festividades, les envío un saludo desde Colombia. Feliz navidad y Año 2008 Bueno, la consulta es acerca de la instalación del amsn, cuando descargo la última versión el archivo que se baja es amsn-0.97RC1-1.tcl84.x86.package Como lo instalo? mi debian es etch. Ya intenté estas cosas: Gabo:/mnt# chmod 777 amsn-0.97RC1-1.tcl84.x86.package Gabo:/mnt# ./amsn-0.97RC1-1.tcl84.x86.package bash: ./amsn-0.97RC1-1.tcl84.x86.package: /bin/bash: bad interpreter: Permiso denegado Gabo:/mnt# dpkg -i amsn-0.97RC1-1.tcl84.x86.package dpkg-deb: `amsn-0.97RC1-1.tcl84.x86.package' no es un archivo en formato debian dpkg: error al procesar amsn-0.97RC1-1.tcl84.x86.package (--install): el subproceso dpkg-deb --control devolvió el código de salida de error 2 Se encontraron errores al procesar: amsn-0.97RC1-1.tcl84.x86.package Gracias Descárgate el paquete .deb: http://packages.debian.org/cgi-bin/search_packages.pl?keywords=amsnsearchon=namesversion=allrelease=allexact=1
Re: configuracion dhclient
El día 18/01/08, harima kun [EMAIL PROTECTED] escribió: ola a toods, acabo de instalale la tarjeta wireless a mi computadora, ya tiene el driver y la detecta, cuando quiero conectarme pongo dhclient wlan0 pero solo manda mensajes de DHCPDISCOVER on WLAN0 to 255.255.255.255 port 67 interval x mire en la configuracion de mi router (2wire el de infintum de telmex) desactive la seguridad wireless, la subnet mask que tiene ess 255.255.255.0 supongo quees por eso que no encuentra DHCPOFFERS, asi que comenze a buscar en la configuracion del dhclient pero no logro hacer que busque en 255 en vez de 0, ya he dejado la configracion como estava...alguna idea? gracias de antemano para poder conectarte a tu wlan usa iwconfig. saludos
Re: Recuperar MBR o tabla de particiones.
El dom, 20-01-2008 a las 14:22 +0100, Manolo Díaz escribió: El Sun, 20 Jan 2008 05:13:58 -0800 francisco [EMAIL PROTECTED] escribió: El disco /dev/sdb no contiene una tabla de particiones válida Si no recuerdo mal testdisk puede intentar descubrir qué particiones existen en el disco y, a partir de ahí, recrear la tabla de particiones. Tan sólo lo he usado una vez, con un disco con varias particiones NTFS, y a mí me funcionó. Saludos y suerte. Si, pero el problema esta en darle el numero exacto de Cilindros, H= cabezas y Sectores. Sin ese dato, dificilmente encuentra la particion. Si puedes y quieres, podrias decir como hacerlo o como lo hicistes? Gracias. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Consulta sobre amsn 0.97
Me da este error cuando ejecuto ./configure checking tcl build dir... configure: error: Unable to find Tcl directory or Tcl package is not tcl-dev El proceso total es: Gabo:/home/gabriel/Descargas/amsn-0.97# ./configure checking for prefix by checking for wish... /usr/bin/wish checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking tcl build dir... configure: error: Unable to find Tcl directory or Tcl package is not tcl-dev Gabo:/home/gabriel/Descargas/amsn-0.97# On Jan 20, 2008 11:18 AM, Santiago José López Borrazás [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 20/01/08 17:13, Santiago José López Borrazás escribió: Ah, y se me olvidó también, que el paquete generado lo tenemos dentro del directorio de AMSN, pero en: amsn-0.97//distrib/DEB/ De hecho, tenemos ya el paquete para instalarlo ;-) - -- Slds de Santiago José López Borrazás Conocimientos avanzados en seguridad informática. Conocimientos avanzados en redes. -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJHk3RIAAoJELuF9/q6J55WXUAQAIGNoavyV3hFn3eFhhSR40Uh b35kPXSa3/Vy0GJF751JHniX4HU+o8r5WZ/AEYBM3R7HmifLMDsXJp1pIzkuJom0 OmcJzhmOiaLmod4pDDxCDUv8pnj0rkT3QOor6yp+C9Lgz+OrE9dHB+tEKbj90mNl SYtsy9zWXNTXXh2ojK3kocKXlb1i0RW2KhQodfZg3XHJwoAE6il7AfO51mtJVjXw A8B3gS7hm6yVYb2YQAjnyNds13XAOOODB5btcpTFn8uzgyQfpG+tfMx6MJAdBWWw 5UgjTekDs3fSoGfNj4jnUng5eV1PkLYQeN/Ljl+o3cVOc96KegLRKpZk6KHk9CZm dGAfa4XBGfD6sV3quDtuV/1h6n/RU88/9QOMVEXO2UKOi3qENde5TfAVkjOPmPnJ ZHgvH/me4Ac43U9qoW99mUd0H0SCoXDN4NkmTb/K4A1McocnYM5gdS1X2yuwTB9b KXX+Jjk5kzO72Y8yZZ6UcXQW4esPATuJ1kaU9MKU9CyB5vQAvDePriNV8Nr+d2Ki k7orNODSakAUHsSoLOCx/JNNHidoYkTyLF4g3g7pG+CNlwaKBRl3Znqne3y8r3+B yp7CmOKQCuIrXkGVBt5OHKz7ebgMZfVtJmE19MO+TCtT6ttEV3IrH3z+OARCSk4R 01yPyFqrDg4Ard8x7Jve =EdVE -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Consulta sobre amsn 0.97
Lo otro es que al parecer son necesarios uno paquetes llamados tcl8.5 y tk8.5, los cuales tampoco he podido instalar. También intenté apt-ge install amsn=0.97-1 y los resultados son: Gabo:/mnt# apt-get install amsn=0.97-1 Leyendo lista de paquetes... Hecho Creando árbol de dependencias... Hecho No se pudieron instalar algunos paquetes. Esto puede significar que usted pidió una situación imposible o, si está usando la distribución inestable, que algunos paquetes necesarios no han sido creados o han sido movidos fuera de Incoming. Como sólo solicito una única operación, es extremadamente posible que el paquete simplemente no sea instalable y debería de rellenar un informe de error contra ese paquete. La siguiente información puede ayudar a resolver la situación: Los siguientes paquetes tienen dependencias incumplidas: amsn: Depende: libc6 (= 2.7-1) pero 2.3.6.ds1-13etch4 va a ser instalado Depende: libgcc1 (= 1:4.2.1) pero 1:4.1.1-21 va a ser instalado Depende: libstdc++6 (= 4.2.1) pero 4.1.1-21 va a ser instalado Depende: tcl8.5 pero no es instalable Depende: tk8.5 pero no es instalable E: Paquetes rotos Gracias
Re: Recuperar MBR o tabla de particiones.
El Sun, 20 Jan 2008 07:48:58 -0800 francisco [EMAIL PROTECTED] escribió: El dom, 20-01-2008 a las 14:22 +0100, Manolo Díaz escribió: El Sun, 20 Jan 2008 05:13:58 -0800 francisco [EMAIL PROTECTED] escribió: El disco /dev/sdb no contiene una tabla de particiones válida Si no recuerdo mal testdisk puede intentar descubrir qué particiones existen en el disco y, a partir de ahí, recrear la tabla de particiones. Tan sólo lo he usado una vez, con un disco con varias particiones NTFS, y a mí me funcionó. Saludos y suerte. Si, pero el problema esta en darle el numero exacto de Cilindros, H= cabezas y Sectores. Sin ese dato, dificilmente encuentra la particion. Si puedes y quieres, podrias decir como hacerlo o como lo hicistes? Gracias. Si conoces los valores correctos (ej. mirando el modelo y buscando sus características) puedes usar la opcion geometry de testdisk para reestablecerlos. Espero que ayude. Saludos -- Manolo Díaz
Re: Consulta sobre amsn 0.97
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 20/01/08 15:41, Gonzalo Castro escribió: Descárgate el paquete .deb: http://packages.debian.org/cgi-bin/search_packages.pl?keywords=amsnsearchon=namesversion=allrelease=allexact=1 Se puede debianizar el AMSN sin ningún problema: Bajamos de las fuentes: http://prdownloads.sourceforge.net/amsn/amsn-0.97.tar.bz2 Lo descomprimimos con: tar --bzip2 -xvf amsn-0.97.tar.bz2 Luego, hacemos: ./configure make deb Y ya tenemos el paquete generado. Tan rápido, tan fácil y tremendamente estable. ;-) - -- Slds de Santiago José López Borrazás Conocimientos avanzados en seguridad informática. Conocimientos avanzados en redes. -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJHk3NAAAoJELuF9/q6J55W28QP/jDrmEuYrEuZwbuuXBZk4nBR Ipj5lfbhWnr3nizpXUDtnyYY8+1WcMbsgu2hyDnbDezrmKCG01hcQdja1tqHRibP mTqGtn9eXh/4lc1BEIOyD9Idm+il02JDaLAPDXUy75wiysQP1VTUuAgzz/IqO4T1 GZHSlIXAt8rMWaj16gcYOMQ/bDEeWVFhrRJ80k4RHpyH+gqmF+dSw9htafWxFtaN BF1jQ48/E/kuCW7zhf65faoqLo1cR0/F7U+AIdquCQDK45oRHYwSfoO2qsVppjGF noYtST8g+slZsVbO210052Q36D07RwaLbVCYe5PknFzqRWDpYSou6GCLI1FyCi+B ULO00FB1wmuKfzh+hCFIiJnTkcYY2whNF2IROIG3ACgtYp2x3rKu1x9XBYkatNM3 ELFWOh0PKIX/wCfDYveC3awispkYzaz1pIlYn3fpMPoEgoGZ8dg0XPqeAv/DWB9L hi+J+gpe0oV5wlka0BnGPBhMiP/9z7EIiGAtSHci4nUVuNqIOQVErlfudNGorryR s1wlHmvWDK3CLra5VhzU5ISF2O7Uc0PcfRmfzQdgvyat4/xgOwghye4yrpBLA+6R r1jU7iskJOC2jLw0dP/nRLt0cP4D0mC+ysUxXPjDWH0C8RaGmM3nFQZtwQjgaTXM oiJKHStRkSBW3luxwDv8 =i+YU -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Consulta sobre amsn 0.97
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 20/01/08 17:13, Santiago José López Borrazás escribió: Ah, y se me olvidó también, que el paquete generado lo tenemos dentro del directorio de AMSN, pero en: amsn-0.97//distrib/DEB/ De hecho, tenemos ya el paquete para instalarlo ;-) - -- Slds de Santiago José López Borrazás Conocimientos avanzados en seguridad informática. Conocimientos avanzados en redes. -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJHk3RIAAoJELuF9/q6J55WXUAQAIGNoavyV3hFn3eFhhSR40Uh b35kPXSa3/Vy0GJF751JHniX4HU+o8r5WZ/AEYBM3R7HmifLMDsXJp1pIzkuJom0 OmcJzhmOiaLmod4pDDxCDUv8pnj0rkT3QOor6yp+C9Lgz+OrE9dHB+tEKbj90mNl SYtsy9zWXNTXXh2ojK3kocKXlb1i0RW2KhQodfZg3XHJwoAE6il7AfO51mtJVjXw A8B3gS7hm6yVYb2YQAjnyNds13XAOOODB5btcpTFn8uzgyQfpG+tfMx6MJAdBWWw 5UgjTekDs3fSoGfNj4jnUng5eV1PkLYQeN/Ljl+o3cVOc96KegLRKpZk6KHk9CZm dGAfa4XBGfD6sV3quDtuV/1h6n/RU88/9QOMVEXO2UKOi3qENde5TfAVkjOPmPnJ ZHgvH/me4Ac43U9qoW99mUd0H0SCoXDN4NkmTb/K4A1McocnYM5gdS1X2yuwTB9b KXX+Jjk5kzO72Y8yZZ6UcXQW4esPATuJ1kaU9MKU9CyB5vQAvDePriNV8Nr+d2Ki k7orNODSakAUHsSoLOCx/JNNHidoYkTyLF4g3g7pG+CNlwaKBRl3Znqne3y8r3+B yp7CmOKQCuIrXkGVBt5OHKz7ebgMZfVtJmE19MO+TCtT6ttEV3IrH3z+OARCSk4R 01yPyFqrDg4Ard8x7Jve =EdVE -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Consulta sobre amsn 0.97
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 20/01/08 17:22, Gabo escribió: Me da este error cuando ejecuto ./configure Haz una cosa: apt-get build-dep amsn Te instalará los paquetes necesarios para compilarlo. (...) directory or Tcl package is not tcl-dev Gabo:/home/gabriel/Descargas/amsn-0.97# Te falta tcl-dev: apt-get install tcl-dev En mi caso lo consigo sin ningún problema ;-) - -- Slds de Santiago José López Borrazás Conocimientos avanzados en seguridad informática. Conocimientos avanzados en redes. -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJHk3dJAAoJELuF9/q6J55WKoIP/iy6kUeJzCCRDDjj+AItjlv2 h38BpN+toNT2WyXo1l+pftBd+trOS5b8QNU/VlmQqV2DkHN+feAixYGeQqsJHmqf JchrI/gTg0N8Qokn6+OQrrCMkhLkZVzaK4g8vit6vEYAkd2hwlhL+mrg/w0W/yz3 zqfvInkJn7XClq8K3c08mJ4vLyeemURQNUXbfZFo/qCmxUqB0Bcp5W4Z0cM2Z6+s WZkgALOBG/wI1rZ3fP84WvQJJc89euPvQTD130u3mON4vhfA0G6sPycnuwGkRIf7 h9AFyrCqlxvhj9MWO6o6m0jQODmxE3Kk3u7ihdgAApC2CCYL4MWdnCPoI1XzcGsL R89K+G2u+P+dJzHz7SVkj+R72t0sW5N9QjSoKsmZyD448aTaVdhKxF18q1OhD4Pu IC53R1SSwTVmtENF99bhTEGjH8GVceU181umo+vy+TObTfIfoJ6H9R7p8o4rMaj1 d6YGFzDl6Ao+b5HeITMV8Xh5JygsZLIGf+AkJpcl+KJNCQrU8Q2Nq8N3B44U0NVn Oce5o0SGYvietEq4piRBIYVCpnX0pgP/AJnsmF/cx6r1JZXszd5+5dAIPKYE4bEJ 7lhJcDe0NGXLjNeDEGdo5SVqwBRNeTk44mKogOuV2Epf6UsxvA3cy6G7XTViApxD IUvngnzqQg3uSstYUYM0 =JVtE -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Consulta sobre amsn 0.97
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 20/01/08 17:22, Gabo escribió: Ah, y perdona, que también te va al privado... - -- Slds de Santiago José López Borrazás Conocimientos avanzados en seguridad informática. Conocimientos avanzados en redes. -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJHk3dkAAoJELuF9/q6J55Wr+AQAIZ0HyXr64uszY9EIGyt9tx7 ons5njlHDiPB6o7400+w1+EKy22GI4bBK210PJJQ6VnasQc5Wf9oNpBk9SlyV+CP KtVRlUkNM5+zWlLSQUxH9AviH27/KGJuJUasyByovxXKxHcsXdbWZ7lq4ysW0wQE V0SMBVbBKOBJeJ4N7CaRx7acZONitTcpa8dehiqds/0lta6IXTtvqhk6gXl25tb1 37znwv+8QrmmGlY0WUqxtj7gg5GagTlecfdt8izrcYKFgrVZkJY1Q/y91L3DCha+ yJMUrF3mqu8jE16c+sZbZ+cqjLcVySZ4SsI/8QXSj8lAOss4B9wP4SlSd7MtYNdr D+REGILh+aG4NbPjDRxPYiIbRLdeXo5fLdmS4NXPpZXEDKhPqe7EXTwTva55FV0I A1szha6gON9KxO/UrZh5u0IU2OK00qMleP+MUpjqkiDVI7W5se6SFGaT80X6cd5p J0jdLebh4lrI8PQs6I9csviEGD0Oc4LjPB1AT5WY5jq6O5nzFHvbZ/3aX+Et4USj xfMMag7k1S/xXFWrBWHp35Zb2mmQayLJPY1v2dcmDcYt4uWR8+9ullQHIlnnd4CZ NRlm77pEca1oaJjWBO716V0TR7yjGZsKH5IXSholhJbLPS2KeJAWwL5Dhf4AhXvI 0DlWUSYOPak1sg3nMwg0 =8uvX -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problema con dist-upgrade (pantalla)
Bueno, hoy cuando arranque la pc veo la línea que le comente durante el inicio (BIOS) asique bueno.. no es un problema del linux propiamente dicho sin embargo me llamo rotundamente la atención la coincidencia con que se dieron las cosas. Que lastima la verdad que estaba muy encariñado con el portátil, valdra la pena repararle el lcd? es una IBM G41. Saludos Iñigo Tejedor Arrondo escribió: 2008/1/19, Fernando [EMAIL PROTECTED]: Hola listeros, les comento un poco mi problema, yo tenia instalado debian en su rama unstable, cuestión que cada vez que actualizaba siempre tenia algún problema de dependencias de cosas que dejaban de funcionar, etc.. Por ello fue que decidí volver a testing. Luego de ejecutar el dist-upgrade y solucionar todos los problemas de dependencias logre por fin volver sin problemas. Pero al reiniciar el linux, noto que me aparece una línea de 1px de ancho y que cruza la pantalla verticalmente de punta a punta de color rosa que a veces cambia a verde :| busque busque pero no logro solucionarlo, esta linea me aparece tanto en la consola como en las X, si alguno paso por esto, tirenme una soga gracias. ¿Se ve también durante el arranque de la BIOS? Prueba a arrancar el PC con un livecd o un liveusb, o el propio instalador de debian, para descartar que el problema no es el sistema operativo. Puede que tengas el problema en el monitor, el cable o la tarjeta gráfica. Si durante el arranque no ves la línea de 1px, entonces es posible que el problema sea del driver de tu tarjeta... y que estés usando ftamebuffer, porque si no no entiendo el que se vea también en consola. Saludos -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Consulta sobre amsn 0.97
iNTENTÉ otra cosa, Ya instalé el tk8.4 y el tcl8.4. Descargué el paquete amsn-0.97-1.tcl84.x86.package y ejecuté la orden package install amsn-0.97-1.tcl84.x86.package pero me arrojó lo siguiente: Gabo:/home/gabriel/Descargas# package install amsn-0.97-1.tcl84.x86.package # Preparando paquete: AMSN MSN client # Comprobando versiones requeridas de la librería de C ... Bien # Comprobando X ... Bien # Comprobando TCL Scripting Language ... Bien # Comprobando Tk GUI Toolkit ... Xlib: connection to :0.0 refused by server Xlib: No protocol specified Application initialization failed: couldn't connect to display :0 Xlib: connection to :0.0 refused by server Xlib: No protocol specified Application initialization failed: couldn't connect to display :0 falló # ERROR: No se pudo encontrar 'Tk GUI Toolkit'. Intente instalar con el administrador de paquetes nativo de Debian (apt-get) un paquete de nombre similar a 'tk'. ERROR: No ha sido posible preparar el paquete AMSN MSN client. Gabo:/home/gabriel/Descargas# como arreglo ese tk gui toolkit? Gracias
Re: Consulta sobre amsn 0.97
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 20/01/08 18:47, Gabo escribió: (...) Xlib: No protocol specified Te indica, que no estás usando las X como root. Debes instalarte sux: apt-get install sux Ahhh, y otra cosa: apt-get build-dep amsn Te dará todos. Eso sí, _todos_ los paquetes para compilar dicho paquete. Application initialization failed: couldn't connect to display :0 Xlib: connection to :0.0 refused by server Xlib: No protocol specified Normal. Lo que yo he dicho. Intentas que funcione como root en una consola normal y corriente bajo root, pero en ventana, pero sin el 'sux'. Mira lo que he dicho arriba, e intenta loggearte haciendo: sux - Ya te debería funcionar... Application initialization failed: couldn't connect to display :0 falló # ERROR: No se pudo encontrar 'Tk GUI Toolkit'. Intente instalar con el administrador de paquetes nativo de Debian (apt-get) un paquete de nombre similar a 'tk'. _Creo_ que te hacen falta cosas... Yo tengo todas estas: ii tk8.48.4.12-1etch1 Tk toolkit for Tcl and X11, v8.4 - run-time ii tk8.4-dev8.4.12-1etch1 Tk toolkit for Tcl and X11, v8.4 - developme Las TCL's: ii amsn 0.97-1 An MSN messenger written in tcl ii libsqlite-tcl2.8.17-4 SQLite TCL bindings ii libsqlite3-tcl 3.4.2-2 SQLite 3 TCL bindings ii tcl8.4 8.4.12-1.1 Tcl (the Tool Command Language) v8.4 - run-t ii tcl8.4-dev 8.4.12-1.1 Tcl (the Tool Command Language) v8.4 - devel ii tcltls 1.5.0-4 The TLS OpenSSL extension to Tcl Y '0' problemas... Pero creo que no me haces caso a lo que te digo, sobre el 'apt-get build-dep amsn' como arreglo ese tk gui toolkit? Te faltan paquetes esenciales para ello. Yo tengo todos los paquetes que hacen referencia para las packages. - -- Slds de Santiago José López Borrazás Conocimientos avanzados en seguridad informática. Conocimientos avanzados en redes. -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJHk4w4AAoJELuF9/q6J55WPdYP/jk3iHR+ac9+BlmbHXW+0sQN q6FRxwAW+7EDEIZfQ+jDx3qt1OeNDFhSeO0xNoradPY4aj87n1dw4g0OoefNW+nt cTWEXbj+rLYVXgkap33hEDj8FvJ5Qi9my3MHU8MupeKi4K0n8uQK3BIyXPfvzXtp IpGk2Wq8n9cqM335SWsn7M9WBtpJECqW2y9dYcggKBa0zSlzEzPxJT7baPlXCLL5 vvF2LKIlzMtF/CElTLaYwZsiA60ZM6YY2Z16iAZ8sO03OqivyuJxj4SD5dbj7o55 3ckc++i575pMlyYlmYplCUQDq5Trms06BOaJ3ceT21Hj4eW1LATOjtpI1xnMjwdX HGo9gzPadYq58SWCzImAsmYlghFAc9j+4yuXzzMe765QPOc2l2XxD+TsNB6hWSCf LVIMvcBrHTKWddYT3C9WGStTapWVhKZ5j5ksKoxN50YDDSnqS1mObPwHMyPeS3sb 12ojxd5Lntkh+k6ajFrfGEswBmFaYPX9IjLJ+gN7XgY73XnSrsP/Fu85/ZnHDxPZ 6qqCkm3TvjJtBLvS73RMTtnQ76l5B9xBxiezH0py6nd4jSzZrnCgt+WcMvytNlzm O41y99kwCXSHq/tk3t4AvkkfhHyPD8hPz5vXIINEp8UlBAx4GhrzIEgowdgzMR6X 73EPy53omtY4crPzKpc3 =fZ6c -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Intentando instalar Grub (empaquetado por Debian)
El 20/01/08, Diego Antonio Lucena Pumar [EMAIL PROTECTED] escribió: Hola lista: Tengo dos distribuciones instaladas en mi disco duro. Fedora 8 y Debian Lenny. El caso es que primeramente instale Fedora y está grabo Grub en el sector de arranque. Necesito instalar el Grub que viene con Debian (el empaquetado de Debian).Ya se que puedo utilizar el de Fedora, de hecho lo estoy haciendo actualmente, pero por temas de virtualización con Xen necesito el Grub de Debian. Por favor me podrían echar una mano. No tengo el arból de directorios de grub en /boot/ del sistema Debian por lo que tendría que crearlo y macharcar el Grub a Fedora, pero no encuentro como hacerlo. Si por el motivo que sea, vuelves a instalar Debian teniendo debajo fedora, arrancando en modo expert (escribiendo 'expert' en la línea de boot:) podrás elegir específicamente el paso de Instalar el gestor de arranque grub y decirle donde. En el punto que estás ahora... yo haría la prueba de: (suponiendo que tu disco es /dev/sda) 1) Hacer una copia del mbr: dd if=/dev/sda of=/root/copia.mbr bs=512 count=1 2) lánzate a la piscina: aptitude install grub 3) si eso no te crea los ficheros en /boot... mirate /usr/lib/grub y /usr/share/doc/grub (allí tienes los ficheros y la documentación) 4) cuando creas que no estás seguro, reinicia. 5) si todo esto no funciona... arranca con un livecd, monta la partición de debian y restaura el mbr: dd if=/ruta/particion_debian/root/copia.mbr of=/dev/sda bs=512 count=1 Suerte! P.D. y si no, haz feliz a tu PC, desinstala la freidora y dedícale todo a Debian !!!
Re: VPN usando PPTP
2008/1/20, Zerial [EMAIL PROTECTED]: Buenas, Necesito conectarme a una VPN usando PPTP, he buscado y he encontrado varios sitios donde explican el Como conectarse facilmente a una VPN pero todos hablan de usar pptpconfig, que es una interface grafica hecha en php+gtk que facilita el trabajo. Mi pregunta es como conecto o levanto la VPN (como cliente) por consola y no por esa interfaz grafica. Tengo un fichero en /etc/ppp/peers/NombredelaVPN y supuestamente deberia marcar con ppp: ppp Nombredelavpn, pero no conecta. He intentado usar el comando pptp pero no he podido hacerlo ¿Alguien sabe como conectarme a una VPN usando PPTP por consola? Mira esto: http://pptpclient.sourceforge.net/howto-debian.phtml P.D. Si lo que tienes es un firewall iptables con NAT, por donde quieres que pasen clientes pptp, solo tienes que cargar un par de módulos de iptables. Saludos
VPN usando PPTP
Buenas, Necesito conectarme a una VPN usando PPTP, he buscado y he encontrado varios sitios donde explican el Como conectarse facilmente a una VPN pero todos hablan de usar pptpconfig, que es una interface grafica hecha en php+gtk que facilita el trabajo. Mi pregunta es como conecto o levanto la VPN (como cliente) por consola y no por esa interfaz grafica. Tengo un fichero en /etc/ppp/peers/NombredelaVPN y supuestamente deberia marcar con ppp: ppp Nombredelavpn, pero no conecta. He intentado usar el comando pptp pero no he podido hacerlo ¿Alguien sabe como conectarme a una VPN usando PPTP por consola? saludos -- Linux User #382319 http://blog.zerial.org
Como autenticar los user de Samba contra una BD en MySQL y el modulo pam_mysql
Hola lista, ante todo un saludo. Mi problema es que quiero autenticar a mis usuarios del dominio (samba) contra una base de datos en mysql, a travéz del módulo pam_mysql, ya he agregado las lineas correspondientes al nombre de la BD, el user para entrar a la BD, el password, los campos que utilizará, la tabla, en fin, todo, en el fichero de samba en el directorio /etc/pam.d/samba. Pero no se como debo hacer para decirle a samba que autentique contra los user de la base de datos de mysql. Si me pudieran dar alguna URL para documentarme, se lo agradeceré. Gracias de antemano. Salu2.. -- Raydel Hernández Martínez **Admin. de Red** JC Celso Maragoto Telef. JC: 758078 E-Mail Jabber: [EMAIL PROTECTED] Web-Site: http://www.cm.pri.jovenclub.cu
Re: VPN usando PPTP
Hola, esto te puede ayudar bastante: www.tuxinfo.com.ar es una revista en formato digital a la cual pertenesco, y justo la ultima nota de tapa en la nro 2, es sobre VPN y se explica muy bien usando PPTP. Espero que te sirva y de paso invito a todos a descargarla mensualmente. Saludos! -- Emiliano Piscitelli www.piscitelli.com.ar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Servidor deja de transmitir
2008/1/16, Oscar Farfán [EMAIL PROTECTED]: Buenas lista aún sigo con el mismo problema con la red de mi servidor debian, ya cambie tarjeta de red y cable pero aun así deja de transmitir la red hice lo que dice el amigo de hacer un ping cuando no este funcionado pero no me responde ninguna otra ip. Has probado a reiniciar es switch o el hub, que no tenga una puerta defectuosa?
Re: comando para cambiar repositorios apt
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 21/01/08 00:36, Iñaki Baz Castillo escribió: De hecho yo ni sabía que había un comando para eso. Pero aunque lo hubiese, el objetivo final es simplemente el de modificar el archivo, ojo: /etc/apt/sources.list Lo puede hacer si quiere, con apt-config. Pero de todos modos, sería mejor editar el fichero /etc/apt/sources.list. ;-) - -- Slds de Santiago José López Borrazás Conocimientos avanzados en seguridad informática. Conocimientos avanzados en redes. -BEGIN PGP SIGNATURE- iQIcBAEBCgAGBQJHk9zIAAoJELuF9/q6J55WN9AP/2TellkKSDceitwcEuqVPdJZ jv1qb4ZeRH68pAxgXd3nAjAIXPPx/+4B+I0oOcV3oERuJjdL41qfZHENrNK1QWWh AYL9HOrSluXVZx7Bt6xtvmZzSJYnnRViXbdYWNm/aU1+rJBdkApHqvBUCP9jszFG mp4DaKh/YQDgUZwZTH7PgamA8k/3cnTGEj+LvBh8WWlb6HWY3xi21o0UBI8iX5aY TN9eMNJusRO+2WxhKoRO7Dnd2WHr+cayEl47QGKxVOnL2tzsJF3mnEGQIdC47teQ EH/R65wqJ7u9bzjx5cC32Hb8H7K1jvAFO7+Yfw+WCezF5AQ3HB2WrbeizDmkGwPp 2jBBwKWmWfdlvg50RaYbnd8ecowg0tnWPgOHFbN3qWmqEPeFdCxxSjhOzliK1JQK FZ7n5NjufQGtPOTJ2Sm6LoMNpJgyqrIEquMfBZfQbV3cjCLKs+NIxqhFA/hX5gIZ 8L9QxmVP3SuwNphMi/+NKbPF/93DbPQDWyhcEXuXPZMCd8CQlIKmcUjghkJQjD/+ 4+UERyijlGaR8ljCSVTOrI8UtDTzsvNQJxR6eAuigAsiWMwzwUdlVmlooCLx6i9j OSRe9e7XevqH6ZbvjSsKpi4rM+/U9i4BZsa10KWobNBYBotOtxEk0uo8ZeSVyMKC gE2cp4CNnd9ZqySEHdUZ =6LH0 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Instalacion en portatil
Intenta poner noapci acpi=off vga=0x317 Saludos -- Douglas Flores. Linux no es Alternativa, es Solución Asterisk Users #1009.
Re: comando para cambiar repositorios apt
El Lunes, 21 de Enero de 2008, Herwin Huillcen escribió: Saludos debianeros Me podrian pasar el comando para cambiar de repositorios , es decir tengo configurados desde cd-rom, pero deseo cambiar a replicas de red (internet), anteriormente en debian sarge era el comando apt-setup, pero ahora en debian etch no tengo la menor idea, o es que se debe hacer siempre manualmente editando el /etc/sources.list? De hecho yo ni sabía que había un comando para eso. Pero aunque lo hubiese, el objetivo final es simplemente el de modificar el archivo, ojo: /etc/apt/sources.list Saludos. -- Iñaki Baz Castillo
comando para cambiar repositorios apt
Saludos debianeros Me podrian pasar el comando para cambiar de repositorios , es decir tengo configurados desde cd-rom, pero deseo cambiar a replicas de red (internet), anteriormente en debian sarge era el comando apt-setup, pero ahora en debian etch no tengo la menor idea, o es que se debe hacer siempre manualmente editando el /etc/sources.list? saludos y gracias de antemano atte -- - Herwin Alayn Huillcen Baca. Ingº de Sistemas y Telecomunicaciones Registro Colegio de Ingenieros del Peru: 66986 Tte Comunicaciones Ejercito Peruano Numero Administrativo: 122408500
Re: Consulta sobre amsn 0.97
1. Nos logueamos como usuario root y descargamos el paquete con el código fuente. $ su - password: # wget http://garr.dl.sourceforge.net/sourceforge/amsn/amsn-0.97.tar.bz2 --17:50:42-- http://garr.dl.sourceforge.net/sourceforge/amsn/amsn-0.97.tar.bz2 = `amsn-0.97.tar.bz2' Resolviendo garr.dl.sourceforge.net... 193.206.140.34 Connecting to garr.dl.sourceforge.net|193.206.140.34|:80... conectado. Petición HTTP enviada, esperando respuesta... 200 OK Longitud: 10,131,843 (9.7M) [application/x-bzip2] 100%[] 10,131,843 104.24K/s ETA 00:00 17:52:20 (101.84 KB/s) - `amsn-0.97.tar.bz2' saved [10131843/10131843] 2. Descomprimimos el código fuente e instalamos los dependencias necesarios para construir el paquete .deb correspondiente: # bzip2 -dc amsn-0.97.tar.bz2 | tar -xv Nos habrá creado el directorio amsn-0.97 # aptitude install docker imlib-base imlib11 sox tcltls tcl8.4-dev tk8.4-devlibpng12-dev libjpeg62-dev debhelper fakeroot g++ 3. Accedemos al directorio donde descomprimimos las fuentes y construimos el paquete .deb que luego instalaremos: # cd amsn-0.97/ # ./configure checking for prefix by checking for wish... /usr/bin/wish checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking if mmx should be used... yes configure: creating ./config.status config.status: creating Makefile config.status : creating utils/linux/capture/config.h compile time options summary X11 : yes Tcl : 8.4 TK : 8.4 DEBUG : no STATIC : no # make deb CXX utils/TkCximage/src/TkCximage.cpp.o CXX utils/TkCximage/src/PhotoFormat.cpp.o CXX utils/TkCximage/src/procs.cpp.o LD utils/linux/linflash/flash.so ... ... dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb --destdir=./distrib/DEB --filename=amsn_0.97-1.deb dpkg-deb: construyendo el paquete `amsn' en `./distrib/DEB/amsn_0.97-1.deb'. make[1]: se sale del directorio `/home/domi/amsn-0.97' rm -f debian/changelog rm -rf debian/amsn 4. Eliminamos la versión anterior (En éste paso doy por sentado que has instalado la versión anterior según la o que nunca lo has instalado, ni siquiera desde los repositorios oficiales de Debian, ya que te puede dar algun problema # dpkg -r amsn (Leyendo la base de datos ... 121098 ficheros y directorios instalados actualmente.) Desinstalando amsn ... 5. Instalamos la nueva versión: # dpkg -i distrib/DEB/amsn_0.97-1.deb Seleccionando el paquete amsn previamente no seleccionado. (Leyendo la base de datos ... 120209 ficheros y directorios instalados actualmente.) Desempaquetando amsn (de distrib/DEB/amsn_0.97-1.deb) ... Configurando amsn (0.97-1) ... Simplemente abre el programa desde el MENÚ KDE / INTERNET y correrlo a ver si anda 2008/1/20, Santiago José López Borrazás [EMAIL PROTECTED]: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 El 20/01/08 18:47, Gabo escribió: (...) Xlib: No protocol specified Te indica, que no estás usando las X como root. Debes instalarte sux: apt-get install sux Ahhh, y otra cosa: apt-get build-dep amsn Te dará todos. Eso sí, _todos_ los paquetes para compilar dicho paquete. Application initialization failed: couldn't connect to display :0 Xlib: connection to :0.0 refused by server Xlib: No protocol specified Normal. Lo que yo he dicho. Intentas que funcione como root en una consola normal y corriente bajo root, pero en ventana, pero sin el 'sux'. Mira lo que he dicho arriba, e intenta loggearte haciendo: sux - Ya te debería funcionar... Application initialization failed: couldn't connect to display :0 falló # ERROR: No se pudo encontrar 'Tk GUI Toolkit'. Intente instalar con el administrador de paquetes nativo de Debian (apt-get) un paquete de nombre similar a 'tk'. _Creo_ que te hacen falta cosas... Yo tengo todas estas: ii tk8.48.4.12-1etch1 Tk toolkit for Tcl and X11, v8.4 - run-time ii tk8.4-dev8.4.12-1etch1 Tk toolkit for Tcl and X11, v8.4 - developme Las TCL's: ii amsn 0.97-1 An MSN messenger written in tcl ii libsqlite-tcl2.8.17-4 SQLite TCL bindings ii libsqlite3-tcl 3.4.2-2 SQLite 3 TCL bindings ii tcl8.4 8.4.12-1.1 Tcl (the Tool Command Language) v8.4 - run-t ii tcl8.4-dev 8.4.12-1.1 Tcl (the Tool Command Language) v8.4 - devel ii tcltls 1.5.0-4 The TLS OpenSSL extension to Tcl Y '0' problemas... Pero creo que no me haces caso a lo que te digo, sobre el 'apt-get build-dep amsn' como arreglo ese tk gui toolkit? Te faltan paquetes esenciales para ello. Yo tengo todos los paquetes que hacen referencia para las packages. - -- Slds de Santiago José López Borrazás Conocimientos
Re: Como autenticar los user de Samba contra una BD en MySQL y el modulo pam_mysql
El Domingo, 20 de Enero de 2008, [EMAIL PROTECTED] Hernández Martínez escribió: Hola lista, ante todo un saludo. Mi problema es que quiero autenticar a mis usuarios del dominio (samba) contra una base de datos en mysql, a travéz del módulo pam_mysql, ya he agregado las lineas correspondientes al nombre de la BD, el user para entrar a la BD, el password, los campos que utilizará, la tabla, en fin, todo, en el fichero de samba en el directorio /etc/pam.d/samba. Pero no se como debo hacer para decirle a samba que autentique contra los user de la base de datos de mysql. Si me pudieran dar alguna URL para documentarme, se lo agradeceré. Pues buscando en Google salen unas cuantas, por ejemplo ésta: http://gentoo-wiki.com/HOWTO_Samba_with_Mysql -- Iñaki Baz Castillo
Re: Formatear disco duro de forma segura
El 18/01/08, JAP [EMAIL PROTECTED] escribió: Igor Hernandez escribió: Hola a todos, Tengo unos datos de caracter confidencial en un disco duro y me gustaría saber como poder formatearlo de forma que sea imposible recuperar la información. No se si me explico, la idea es llenar el disco duro de datos aleatorios para que nadie pueda leer restos del contenido del disco. He pensado en hacer if=/dev/zero of=/dev/sda bs=524288 (Vamos llenarlo de ceros) ¿Qué opinais de esta solución?¿Es suficientemente segura o conoceis alguna otra? Gracias y un saludo man shred # shred -vfz -n 100 /dev/sda | | chiste tambien darle con un martillo, quemar sus restos y esparcir las cenizas podria funcionar... /chiste
Re: para xfce: ¿screensaver y visualizador de imágenes?
mmejiav wrote: El 18/01/08, Marcos Delgado [EMAIL PROTECTED] escribió: 2. para visualizar archivos jpg / gif / png el los abre con gimp... recuerdo que en kde existe una aplicación para visualizarlos de forma ligera (no recuerdo el nombre) existe algo similar en xfce? Yo utilizo desde siempre el gqview que es ligero y con algunas opciones interesantes como la generación de colecciones, visualización de información EXIF y un largo etc. A mi también me gusta gqview, el único inconveniente que le veo es que no pueda ver las imágenes dentro de archivos comprimidos, como los zip. Saludos. Marcos Delgado. Gracias por la pronta respuesta de todos (como es usual) ya instale xscreensaver ... pero no se lanza automáticamente... generé un script de arranque y lo coloque en /etc/rc2.d ... dice así: #!/bin/bash case $1 in start) /usr/bin/xscreensaver ;; stop) killall xscreensaver ;; esac; y genere un link a rc2.d: S32xscreensaver pero no arranca automático así que me toca a mano :( en cuanto a las imágenes preferí el kuickshow ... cualquier otra ayudita sera escuchada cordialmente mmejiav El screensaver como creo que ya te han comentado lo arranca el usuario que inicia la sesion x, por lo que yo por ejemplo lo arranco en mi .xsession algo así: (yo no uso Escritorio solo el gestor de ventanas fvwm.) -- fvwm-root --retain-pixmap $HOME/.fvwm/fondo_madera.xpm xterm -sb -sl 500 -j -ls -fn 7x14 -bg lightgray -fg black -geometry +0+0 xterm -sb -sl 500 -j -ls -fn 7x14 -bg lightgray -fg black -geometry +0+390 gkrellm xscreensaver xhost +local: exec fvwm --- Un saludo. -- Fernando. {:-{D Hackers do it with fewer instructions. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
senhas
Olá gente! To com uma bronca, que fiquei até sem jeito de vir aqui pedir ajuda pois pode parecer que conversa para sai por ai trocando senha. tenho 2 computadores um meu e de minha esposa e outro dos meus filhos, bom passei a senha de root para eles visto que eles ja sabem instalar o sistema, programas e , recentemente eles mudaram a senha e não sabe se a que anotaram ta certa, ja tentei tudo mais nada, daia fui pesquizar na net achei este tuto http://www.vivaolinux.com.br/artigos/verArtigo.php?codigo=1752pagina=1, vou ver se da certo agora visto que esta é a terceira vez. Ai eu prgunto tem alguma outra forma de recupera a senha? desculpem se este tipo de coisa não se pode perguntar aqui! -- Marcos Egito 081-8762 - 4378 celular 081-3456 - 6076 casa [EMAIL PROTECTED] ... ( Toni Morrison )
Re: senhas
Com acesso ao PC, de boot por um cd de instalação ou live, mounte a raiz do sistema mount /dev/hda1 /mnt/raiz e mude para o sistema instalado chroot /mnt/raiz e mude a senha usando o passwd .
Re: senhas
Olá gente Valeu a ajuda consegui 2008/1/20, André Moura [EMAIL PROTECTED]: Com acesso ao PC, de boot por um cd de instalação ou live, mounte a raiz do sistema mount /dev/hda1 /mnt/raiz e mude para o sistema instalado chroot /mnt/raiz e mude a senha usando o passwd . -- Marcos Egito 081-8762 - 4378 celular 081-3456 - 6076 casa [EMAIL PROTECTED] ... ( Toni Morrison )
Re: senhas
On Jan 20, 2008 9:06 AM, Marcos Antonio Rufino do Egito [EMAIL PROTECTED] wrote: Ai eu prgunto tem alguma outra forma de recupera a senha? desculpem se este tipo de coisa não se pode perguntar aqui! Marcos, essa e' uma duvida recorrente e certamente nao ha' com o que vc se preocupar em perguntar aqui. A forma mais simples de se recuperar a senha de root e' rebootando o sistema em modo single. Mas para isso, e' necessario que o seu gerenciador de boot (GRUB ou mesmo Lilo) estejam com senha desabilitada ou pelo menos vc saiba essa senha caso ela esteja habilitada. Alem disso, seu sistema precisa estar configurado para nao pedir a senha de root para entrar em modo single (tal configuracao fica no /etc/inittab). O que vc precisa fazer e' (vou exemplificar o caso do GRUB): - No momento em que vc estiver no GRUB, vc deve editar a linha de inicializacao do kernel, pressionando a tecla e e adicionando na linha relativa ao kernel, a palavra single ao final. - Feito isso, aperte b para dar boot usando esse kernel. Caso o modo singles esteja configurado para nao pedir senha, vc automaticamente caira' num shell como root e dai' podera' alterar a senha com o comando passwd. t+, -- --- Silvio Leonardo Go, Jazz, go!!!
Re: senhas
Ok gente! valeu mesmo, pelas ajudas eu consegui, bom estes tutoriais, e este do grub, eu não sabia -- Marcos Egito 081-8762 - 4378 celular 081-3456 - 6076 casa [EMAIL PROTECTED]
Re: senhas
Uma vez eu passei por isto, a solução foi dar boot por um LiveCD, montar a partição raiz desta distro inacessível num diretório qualquer, então eu limpei o conteúdo da senha do root no arquivo /etc/shadow (a senha criptografada fica entre o primeiro ':' depois da palavra root e o segundo ':'), rebootei, iniciei o sistema e a senha de root estava zerada, bastou usar passwd para setar uma nova e estava tudo resolvido. Boa sorte Flavio Alberto Marcos Antonio Rufino do Egito wrote: Olá gente! To com uma bronca, que fiquei até sem jeito de vir aqui pedir ajuda pois pode parecer que conversa para sai por ai trocando senha. tenho 2 computadores um meu e de minha esposa e outro dos meus filhos, bom passei a senha de root para eles visto que eles ja sabem instalar o sistema, programas e , recentemente eles mudaram a senha e não sabe se a que anotaram ta certa, ja tentei tudo mais nada, daia fui pesquizar na net achei este tuto http://www.vivaolinux.com.br/artigos/verArtigo.php?codigo=1752pagina=1 http://www.vivaolinux.com.br/artigos/verArtigo.php?codigo=1752pagina=1, vou ver se da certo agora visto que esta é a terceira vez. Ai eu prgunto tem alguma outra forma de recupera a senha? desculpem se este tipo de coisa não se pode perguntar aqui! -- Marcos Egito 081-8762 - 4378 celular 081-3456 - 6076 casa [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] ... ( Toni Morrison ) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Dns interno
Olá, Resolver para fora - OK Resolver interno - OK Resolver e-mail - ai que esta o problema... ele tem 03 domínios no mesmo servidor de e-mail... quando envio e-mail para o mesmo dominio blz o e-mail chega, mas quando tento enviar e-mail para outro dominio interno, nada..o postfix responde dizendo que não conseguiu entregar a mensagem. Quando um usuário do domínio nss.com.br envia uma mensagem para esse domínio ela é entregue. Mas se esse usuário envia uma mensagem para o domínio nsc.com.br (que também está no seu servidor) o postfix diz que não consegue entregar o e-mail? É isso o que está acontecendo? -- Rodolfo Barbosa Lunar Consultoria -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: squid autenticando no em 2 AD's
é, talvez possa se estudar um método baseado no que vc propôs, mas em vez de usar 3 maquinas poderia rodar os 3 proxys na mesma máquina: 2 apenas para a autenticação e o terceiro para cache. Talvez de pra implementar isso com 3 squids ou 1 squid e 2 proxys especificos para isso. Mas de fato, a complexidade pode aumentar bastante, pelo menos enquanto não tivermos um conhecimento aprofundado de como esses proxies permitem esse trabalho integrado. Uma outra possibilidade: substituir o smb_auth na linha auth_param por um autenticador dummy, ou seja, que sempre vai responder com um 'OK'. Então, no início de suas acls, chamar uma external_acl_type, que fará a triagem necessária e chamará o smb_auth com os parametros definidos pela triagem, ou seja, usara o AD finan ou AD adm. Voltando à alternativa que falei no primeiro email, verifique o arquivo /usr/lib/squid/smb_auth.sh, note que na linha 51 ele define o domain controller ip address dcip: dcip=`$SAMBAPREFIX/bin/nmblookup $addropt $PASSTHROUGH#1c | awk '/^[0-9.]+\..+ / { print $1 ; exit }'` Bastaria comentar essa linha, então abaixo dela chamar o seu triagem.sh (usando source): source /usr/local/sbin/triagem.sh esse script teria o seguinte esqueleto: #!/usr/bin/bash ... ... código de triagem (define $user_domain baseado nas duas listas de usuarios ADM[] e FINAN[])... ... case $user_domain in ADM) dcip=ip do AD adm ;; FINAN) dcip=ip do AD finan ;; esac PS: sugiro enviar todos emails da conersa para a lista como CC, pois provavelmente será util para outros no futuro. Tom Lobato www.tinecon.com.br Leandro Moreira escreveu: Tom, Pensei em outra alternativa, colcoar um squid somente para autenticação em cara rede, e um squid central pararealizar os bloqueios, mas acho que essa estrutura fica muito complexa para administrar além do custo pois terei que adquiri mais dois servidores pra isso. Vou começar a trabalhar agora nas modificações e sugestões que você me mandou. Assim que tiver algum resultado posto na lista. Mais uma vez muito obrigado por sua atenção. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
instalacao de rwindows via servidor de boot?
Olá pessoal, montei um servidor de boot PXE aqui na minha rede. Estou precisando instalar o rwindows em alguns clientes. Ainda nao encontrei nada na net de como colocar uma imagem de um cd de instalacao do windows nesse servidor para que eu instale o windows pela rede. Alguem ja fez isso? Sabe me dar o caminho das pedras de como instalar o rwindows via PXE? O colega Fernando deu uma dica muito boa de usar o systemimager, mas ainda assim estou apanhando. Muito Grato a todos.
Re: senhas
Em Dom 20 Jan 2008, Silvio Leonardo escreveu: [...] A forma mais simples de se recuperar a senha de root e' rebootando o sistema em modo single. Mas para isso, e' necessario que o seu gerenciador de boot (GRUB ou mesmo Lilo) estejam com senha desabilitada ou pelo menos vc saiba essa senha caso ela esteja habilitada. Alem disso, seu sistema precisa estar configurado para nao pedir a senha de root para entrar em modo single (tal configuracao fica no /etc/inittab). O que vc precisa fazer e' (vou exemplificar o caso do GRUB): - No momento em que vc estiver no GRUB, vc deve editar a linha de inicializacao do kernel, pressionando a tecla e e adicionando na linha relativa ao kernel, a palavra single ao final. como alternativa, você pode substituir o init para: init=/bin/bash - Feito isso, aperte b para dar boot usando esse kernel. Caso o modo singles esteja configurado para nao pedir senha, vc automaticamente caira' num shell como root e dai' podera' alterar a senha com o comando passwd. E assim que o sistema iniciar: # mount -o remount,rw / # passwd # shutdown -r now Davi Vidal
Re: squid
Olá Josemar, Desculpe a demora em enviar o arquivo. Passei o fim-de-semana batendo cabeça, mas não consegui resolver o meu problema. Estou usando a versão estável do debian etch. Squid Cache: Version 2.6.STABLE5 Segue o squid.conf http_port XXX.XXX.XXX.XXX:3128 transparent icp_port 0 htcp_port 0 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? no_cache deny QUERY cache_mem 2048 MB cache_swap_low 90 cache_swap_high 95 maximum_object_size 4096 KB minimum_object_size 8 KB maximum_object_size_in_memory 1048 KB ipcache_low 90 ipcache_high 95 cache_replacement_policy heap LFUDA memory_replacement_policy heap LFUDA cache_dir diskd /squid1 4096 64 256 Q1=64 Q2=72 cache_dir diskd /squid2 4096 64 256 Q1=64 Q2=72 access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log none pid_filename /var/run/squid.pid debug_options ALL,1 client_netmask 255.255.255.255 dns_nameservers XXX.XXX.XXX.X hosts_file /etc/hosts unlinkd_program /usr/lib/squid/unlinkd request_header_max_size 512 KB request_body_max_size 5242880 KB allow !acessohome refresh_pattern ^ftp: 144020% 10080 refresh_pattern ^gopher:14400% 1440 refresh_pattern . 0 20% 4320 quick_abort_min 16 KB quick_abort_max 16 KB quick_abort_pct 95 negative_ttl 5 minutes positive_dns_ttl 1440 minutes negative_dns_ttl 1 minute forward_timeout 4 minutes connect_timeout 1 minute peer_connect_timeout 30 seconds read_timeout 15 minutes request_timeout 5 minutes persistent_request_timeout 1 minute client_lifetime 1 day half_closed_clients off pconn_timeout 120 seconds acl acessohome src /etc/squid/acessohome acl blocked url_regex -i /etc/squid/blacklist http_access allow blocked acessohome http_access deny blocked deny_info http://www.cecomp.ufrr.br blocked acl malware_block_list url_regex -i /etc/squid/malware http_access deny malware_block_list deny_info http://malware.hiperlinks.com.br/denied.shtml malware_block_list acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 acl Safe_ports port 80 8080 # http acl Safe_ports port 8590# http capes acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT acl admin arp /etc/squid/admin.txt http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports acl src XXX.XXX.XXX.X http_access allow localhost http_access allow http_access deny all http_reply_access allow icp_access deny all reply_header_max_size 20 KB reply_body_max_size 157286400 allow !acessohome cache_mgr admin cache_effective_user proxy cache_effective_group proxy httpd_suppress_version_string on visible_hostname proxy. logfile_rotate 4 err_html_text mailto log_icp_queries on minimum_direct_hops 4 minimum_direct_rtt 400 always_direct allow error_directory /usr/share/squid/errors/Portuguese coredump_dir none pipeline_prefetch off ie_refresh on Obrigado, Marcos Em 16/01/08, Josemar Vieira [EMAIL PROTECTED] escreveu: Em 16/01/08, Marcos Ferreira [EMAIL PROTECTED] escreveu: Olá Senhores! Desde segunda-feira estou com problemas no meu squid. Sites que antes carregavam normalmente, agora não carregam de jeito nenhum. Um deles é www.bol.com.br. Se tiro o squid do ar, o site entra normal. Mas, se o squid volta o site pára. A página principal do uol carrega, mas não consigo acessar nenhum link da página. Já limpei o cache, mas também não resolveu. Dei uma olhada nos logs e observei a seguinte mensagem: TCP_DENIED/400 1200 NONE error:unsupported-request-method - NONE/- text/html Alguém pode me dar uma sugestão do que fazer ? Obrigado, Marcos qual a versão do teu squid ? Como está teu squid.conf ? -- Josemar Vieira
Re: Problema com o Som do Lenny
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Experimente instalar o: # apt-get install alsa-base e reiniciar o PC, okay? Abraço, Brivaldo Jr (condector) -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: http://firegpg.tuxfamily.org iD8DBQFHlDNVtw0/3sq6gvcRArhnAJ0cO3aM3H2EnUbv4cq4hp3pYvwUrgCeJkaU rWmmj6H2SCYe3yfj837uaBs= =fy6A -END PGP SIGNATURE-
Re: Where do you put your swap partition?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 01/19/08 23:50, Charlie wrote: On Sun, 20 Jan 2008, David Brodbeck shared this with us all: --} --} On Jan 18, 2008, at 2:18 PM, [EMAIL PROTECTED] wrote: --} What do you guys think? --} --} I think you should add RAM until you don't swap. :) --} --} Interesting. It's like people lucky enough to have broadband, thought that all the world must be on broadband. So when someone asked why they were finding many websites to be so slow, some answered just get broadband. We were on dial up till the beginning of this year because there was no broadband of any sort Move to civilization? available here. Some people are still on dialup here and other parts of the world. We can now get satellite. Not much faster in most cases. There would be people who can't afford more RAM, or have machines for which RAM is no longer available I suppose. So the answer is interesting. Charlie - -- Ron Johnson, Jr. Jefferson LA USA I'm not a vegetarian because I love animals, I'm a vegetarian because I hate vegetables! unknown -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHkwXPS9HxQb37XmcRAlyOAKC/uIAoJG2qQEb+gEBSKWNoxX3KkgCg3Tqc aQLg6UyM/PArL0aejja3HW8= =rM1b -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Where do you put your swap partition?
On Sat, Jan 19, 2008 at 11:59:25PM -0800, David Brodbeck wrote: Still, with 512 MB of RAM going for $30, someone who can't afford enough RAM for a typical desktop system probably has more pressing concerns than spending time tinkering with Linux to try to wring out the last bit of performance. It's not necessarily a matter of cost... The machine I'm typing this on, for instance, has 4 RAM slots. Each will accept up to 256M. (It is, admittedly, a bit on the old side.) However, the slots are only recognized sequentially and there's something wrong with the second slot, such that putting RAM into it causes memory corruption. So it's pretty much limited to 256M until I decide that it's worth the trouble of installing a new motherboard. It still works more than well enough that I feel no need to do so. And, yes, it does make use of swap, but very, very rarely to the point of being particularly noticable. (And, when it does become annoying, it's usually because my browser has bloated out to consume the majority of physical RAM, so just closing and reopening it fixes that right quick.) -- I reckon we are now the only monastry ever that had a dungeon stuffed with sixteen thousand zombies. - perlmonks.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Delete QT4 library
Hi, Due to limited root space, I am going to delete QT4 library. I am not sure if following library is used by any system applications or not as I am using Opera and Open office. Would be safe if I delete following package permenentaly by using purge? $ aptitude search 'qt4' p libavahi-qt4-1 - Avahi Qt4 integration library p libavahi-qt4-dev- Development headers for the Avahi Qt4 intei libqt4-core - Qt 4 core non-GUI functionality runtime lip libqt4-debug- Qt 4 library debugging symbols i libqt4-dev - Qt 4 development files i libqt4-gui - Qt 4 core GUI functionality runtime librari libqt4-qt3support - Qt 3 compatibility library for Qt 4 p libqt4-ruby - ruby bindings for the Qt4 GUI library p libqt4-ruby1.8 - ruby bindings for the Qt4 GUI library i libqt4-sql - Qt 4 SQL database module p libsmokeqt4-1 - smoke library for Qt4 p libtulip-qt4-2.0-dev- Tulip graph library - Qt/OpenGL GUI develop libtulip-qt4-2.0c2a - Tulip graph library - Qt/OpenGL GUI runtimp libvtk5-qt4 - Visualization Toolkit - A high level 3D vip libvtk5-qt4-dev - Visualization Toolkit - A high level 3D vip lsb-qt4 - Linux Standard Base 3.1 Qt4 support packagv lsb-qt4-ia32- v lsb-qt4-noarch - p pyqt4-dev-tools - Development tools for PyQt4 p python-qt4 - Python bindings for Qt4 p python-qt4-dev - Development files for PyQt4 p python-qt4-doc - Documentation and examples for PyQt4 p python-qt4-gl - Python bindings for Qt4's OpenGL module p python-qt4-sql - Python bindings for Qt4's SQL module v python2.3-qt4 - v python2.3-qt4-gl- v python2.3-qt4-sql - v python2.4-qt4 - v python2.4-qt4-gl- v python2.4-qt4-sql - p qt4-designer- Qt 4 Designer p qt4-dev-tools - Qt 4 development tools p qt4-doc - Qt 4 API documentation p qt4-qtconfig- Qt 4 configuration tool Thank you. Jim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: rsync 10 times slower in Etch than in Sarge!
on Fri, Jan 18, 2008 at 12:16:28PM -0500, Douglas A. Tutty wrote: Why issue a 'sync' instead of just unmounting and waiting until the thing stops flashing? On Fri, Jan 18, 2008 at 09:24:22AM -0900, Ken Irving [EMAIL PROTECTED] was heard to say: sync blocks, so you can tell from the command line when the job is done. Daniel Burrows [EMAIL PROTECTED] writes: So does umount. (I see you said that below, but I wanted to underline it again; it looks like Rudolfo overlooked it) After umount completes, it's safe to remove the stick. Rodolfo: I didn't overlook this, but: 1) in my experience, some time ago I used to extract the pendrive after `umount' completes and the device often got corrupted. When I asked this list for help to recover it, someone suggested to apply the `sync' option to the mount option: since then I put that option in my fstab, until this thread advised not to do so; Daniel Burrows [EMAIL PROTECTED] writes: I've been using Linux for 10 years, and I've always, always, always heard that umount had a side effect of flushing dirty buffers to disk and syncing the filesystem. But I did a little research before I replied, and I came up with some surprising information. [...] Rodolfo: 2) I measured the time, and it seems to me that the `sync' command takes a little longer than `umount' to stop. Daniel: I don't know for sure, but this could be because sync flushes the write buffers on all devices, not just the one you're pulling out. Thanks for taking care of the important matter. Then I presume that if I use both issues, i.e. first do `sync' and then `umount', I should feel quite safe: is that right? I did so some times now (with no `sync' option left in my fstab) and nothing bad has happened up to now. Bye Rodolfo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How to use Mutt?
On Sat, 19 Jan 2008, Douglas A. Tutty wrote: On Sat, Jan 19, 2008 at 03:54:32PM -0800, Roger B.A. Klorese wrote: Pantor wrote: ---Mutt: (no mailbox) [Msgs:0]---(date/date)-%gt;-(all)--- No mailbox is open. Why it is? Because you have it configured to look for mail in a different place from where you have your MTA configured to put incoming mail. Fix it. Or because nothing or nobody has sent him mail so /var/mail does not exist yet. It doesn't get created by adduser, but by the MTA when it delivers the first piece. Does mutt exit when it tells you that no mailbox is open? If not (I would hope not), just mail yourself something. Hit 'm', enter your own user name (login name) on the box, give a subject, e.g. 'test', then write yourself a love letter. exit the editor, hit 'y' to send it. Hit 'q' to exit mutt. Restart mutt and it should tell you that you have one piece of mail. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] I tried swtching over to Mutt, yet having used (pine) for more than a decade, I cannot find myself to migrate, now that pine is dead, I have switched to alpine and cannot get enough of it! Justin. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pppoeconf / Verizon DSL
In article [EMAIL PROTECTED] you wrote: In article [EMAIL PROTECTED] you wrote: Can you open any browser and type in the address bar 192.168.1.1 and click go. This should bring you to the connection summary page of the Westell modem. I have already tried 3 different browsers and none of them will load the summary page. I finally got summary page to load and was able to change the username and password. I still don't have access to the Internet, but I think it's because I was never able to complete the modem setup on the Verizon site. I still can't do it because IE running under Wine won't download ActiveX. So I'll just have to tell the Verizon techs that I can't complete the installation process. Larry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Server fails to boot after upgrade
On Jan 18, 2008 11:25 PM, Александър Л. Димитров [EMAIL PROTECTED] wrote: Quoth Thomas Damgaard: The IDE activity LED does not blink a lot after I turn the power on, and I cannot hear the disk head moving. So I am figuring that it fails just after GRUB or something. GRUB would actually want to read from the disk. After initial BIOS bootstrapping, the master boot sector of your HD is read - usually, there'd be a bootloader for GRUB, which then mounts the filesystem it knows (was pointed to by the original install) and then boots the real bootloader (what you can see on the screen) because the MBR is usually waaay to small to hold modern bootloaders. All this involves quite a bit of disk activity. Yeah. I know that GRUB reads from the disk, but not at all as much as when the server boots successfully. There is some IDE activity in the beginning, but not very much. I do not have any monitor or a keyboard, so I cannot see exactly what is happening, but I have taken the primary hard drive out and put it in an USB enclosure, so that I can mount the root filesystem of the server on my laptop. That doesn't really make your life easier. I think a monitor (at the very least) would be a nice idea... Ok. I do not have a monitor or a keyboard at the moment. :( I can then chroot into the filesystem and do stuff. I have tried installing an older kernel image package. But this did not help. Did you try to re-install GRUB? If you say that it doesn't read from the HD, I think it's unable to read the/a boot loader - so you might try reinstalling. Ok. Shouldn't I be able to do this from the root filesystem mounted via USB and then chroot into it and run update-grub? This I already tried. My /boot/grub/menu.lst is here: http://thomasdamgaard.dk/p/P1050.html looks fine to me. But maybe the MBR isn't set up properly... How do I set that up properly? -- Med venlig hilsen/Kind regards Thomas Damgaard Nielsen http://thomasdamgaard.dk
Re: Server fails to boot after upgrade
On Jan 19, 2008 5:14 AM, Douglas A. Tutty [EMAIL PROTECTED] wrote: On Fri, Jan 18, 2008 at 10:51:13PM +0100, Thomas Damgaard wrote: I do not have any monitor or a keyboard, so I cannot see exactly what is happening, but I have taken the primary hard drive out and put it in an USB enclosure, so that I can mount the root filesystem of the server on my laptop. Why not just hook up a serial cable between the two and use the laptop as a serial console for the server. Log the output and see what's up. I do not own a serial cable and I don't think that my Thinkpad T42 has a serial port. -- Med venlig hilsen/Kind regards Thomas Damgaard Nielsen http://thomasdamgaard.dk -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sarge r7 CDs released
On Sun, 20 Jan 2008, Adrian Levi wrote: On 19/01/2008, Steve McIntyre [EMAIL PROTECTED] wrote: After a couple of false starts, we finally have the CDs and DVDs built for the latest sarge (oldstable) point release, 3.1 r7. See http://cdimage.debian.org/cdimage/archive/3.1_r7/ On Azureus bittorrent I get the error: Error(The requested download is not authorised for use with this tracker). They are now authorized on the tracker, but I don't have the space to seed them. I only have space for the current release and the current weekly build. /Mattias Wadenstein -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Problem with sidebar in Mozilla
With Mozilla browser, Debian Etch: View Show/Hide Sidebar . I set it to `hide' and the sidebar hides; but then when I go on navigating it appears again and again at every new web address. How can I hide it for as long as I wish? Does anybody have the same problem? Thanks for any help Rodolfo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
DSL modems over USB?
Hi all, [Please CC me on any replies] Does GNU/Linux have any support for using DSL modems over USB? I'm mainly interested in the Speedstream 4200 since I'm at a house that uses it :( lsusb: Bus 004 Device 003: ID 067c:e240 Efficient Networks, Inc. Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 8 idVendor 0x067c Efficient Networks, Inc. idProduct 0xe240 bcdDevice1.01 iManufacturer 2 Siemens Subscriber Networks, Inc. iProduct3 SpeedStream iSerial 4 SpeedStream bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 6 Main Configuration bmAttributes 0xc0 Self Powered MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol255 iInterface 7 Standard Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol255 iInterface 8 High Performance Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0001 Self Powered -- bye, pabs http://wiki.debian.org/PaulWise signature.asc Description: This is a digitally signed message part
Re: How to work with trees ? when working with OpenOffice or dia whatever
On Jan 19, 2008 10:42 PM, Jabka Atu [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Good Day ,.. I write a lot of text diagrams and many times i need to represent trees At first i did circles and lines in OO then and dia but i know that this is bad idea so i started to search for fast way but i can't find one. I'm searching for a fast tool (graphical or non graphical) that will integrate with OO nativly some thing like : ROOT Child ANODE_1/Child A Child BNODE_2/Child B /ROOT NODE_1 Child ANODE_3/Child A Child BNODE_4/Child B /NODE_1 etc .. and i run some func and get a oo or dia configurable file that can be pased or eddited Could http://www.graphviz.org/ be useful for you ? You can use 'dia' output. With Dot (http://www.graphviz.org/doc/info/lang.html) language you can descript a graph. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [OT] where is conio.h with getch()?
Sergio Cuéllar Valdés wrote: 2008/1/19, Hugo Vanwoerkom [EMAIL PROTECTED]: Hi, In looking around after Kent's question on key presses I found getch() and putch() and the manual (from 1986) says that they are in conio.h. But that's no longer around. That means getch() and putch() have gone away? In favor of what? Hello, as I know, conio.h does not belong to the C standard library. So you cannot compile a program with it in GNU/Linux or other flavor of Unix. Take a look to ncurses [1], [1] http://www.gnu.org/software/ncurses/ Thanks, Sergio. But using that version of getch() wanted all sorts of other ncurses routines. You couldn't just use getch(). Hugo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pppoeconf / Verizon DSL
Larry Fletcher wrote: In article [EMAIL PROTECTED] you wrote: In article [EMAIL PROTECTED] you wrote: Can you open any browser and type in the address bar 192.168.1.1 and click go. This should bring you to the connection summary page of the Westell modem. I have already tried 3 different browsers and none of them will load the summary page. I finally got summary page to load and was able to change the username and password. try: route add default gw 192.168.1.1 Laurent -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: /etc/modutils/0keep: line 9: keep: command not found
On Sat, Jan 19, 2008 at 22:11:28 -0800, tom arnall wrote: i interrupted 'apt-get install linux-wlan-ng' and when i did the command again i got at the end of the installation messages: /etc/modutils/0keep: line 9: keep: command not found Error while executing /etc/modutils/0keep, aborting Note: If /etc/modutils/0keep should not be an executable script, please ensure it does not have execute permission dpkg: error while cleaning up: subprocess post-removal script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/linux-wlan-ng_0.2.5+dfsg+prism2dl-1etch1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) As far as I can tell, /etc/modutils/0keep should not be executable. It belongs to the modutils package, which itself is depreciated for 2.6 kernels and has been superceded by module-init-tools. system details: [EMAIL PROTECTED]:/etc/modutils$ uname -r 2.6.16.4 Etch's kernel is at 2.6.18.5. and etch Not really, you seem to be running something in between Sarge and Etch. I would fully upgrade to Etch before doing anything else. Then you can install module-assistant and it should do all the wlan-ng-related work for you. (module-assistant prepare followed by module-assistant auto-install linux-wlan-ng.) -- Regards,| http://users.icfo.es/Florian.Kulzer Florian | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: powerline ethernet
On 17/01/08 18:14:05, Scott Lair wrote: Barry Samuels wrote: I have recently purchased two Solwise 200Mbps NET-PL-200AV-PUSH. They installed (nothing other than plugging them in really) and worked. I've had no trouble with them and transfer speed is good. One of the reasons I chose them is that they offered to take them back and give a full refund if the units didn't work properly in my situation. I use Debian Testing. Very good, just what I wanted to hear. Have you tested the throughput on them? Just curious if you are getting around 20MBs or more like 10MBs. scott I had tested them originally and remember that the speed was satisfactory but couldn't remember what the speeds actually were so I've just done it again. I connected my laptop directly to the router with an ethernet cable so that wireless speeds don't enter the equation. I uploaded a large .iso file from my desktop, on one end of the HomePlug system, to the laptop and got 50-60 Mbs (note 'bits' not 'bytes') and then downloaded from the laptop to my desktop and got 40-50 Mbs. These Solwise HomePlug units are rated at 200 Mbs but there is obviously some loss over the mains. We also have electric heating in the house which is controlled from a central controller also by sending signals along the mains cables. I don't know whether there is any loss on the HomePlug system because of that but both the ethernet transmissions and the heating signals appear to be quite reliable. -- Barry Samuels http://www.beenthere-donethat.org.uk The Unofficial Guide to Great Britain
Re: How to use Mutt?
On 04:43 Sun 20 Jan , Justin Piszcz wrote: I tried swtching over to Mutt, yet having used (pine) for more than a decade, I cannot find myself to migrate, now that pine is dead, I have switched to alpine and cannot get enough of it! Justin. I used GUI MUAs for years; Eudora, Claws etc. but they would never do exactly what I wanted. Started using Mutt about six months ago and am still learning but already I have it configured closer to my ideal than all the others put together. Well worth the effort. -- Regards, Joe -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Delete QT4 library
hce wrote: Hi, Due to limited root space, I am going to delete QT4 library. I am not sure if following library is used by any system applications or not as I am using Opera and Open office. Would be safe if I delete following package permenentaly by using purge? Hi Jim If the QT4 library are one or more debian packages, then they should be specified as auto removable if not used, unless they were manually installed. The package manager will alert you if removing them will break any other packages. David S -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pppoeconf / Verizon DSL
On Sun, Jan 20, 2008 at 01:26:12AM -0800, Larry Fletcher wrote: I finally got summary page to load and was able to change the username and password. I still don't have access to the Internet, but I think it's because I was never able to complete the modem setup on the Verizon site. I still can't do it because IE running under Wine won't download ActiveX. So I'll just have to tell the Verizon techs that I can't complete the installation process. Larry Hello again Larry, Good! If you can connect to your modems connection summary page, then your end is working. Now you need to inform Verizon that their end is not. Make sure you didn't place one of those filters on the phone line going to your dsl modem. Also add the line about the default gateway posted earlier to your routing table. Good Luck! -- Paul Lane KC9EYE http://www.qsl.net/kc9eye/ - Life after all, is a fatal disease, and the mortality rate for humans, at the end of the day is 100%. K.C. Cole (from The Universe and the Teacup) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pppoeconf / Verizon DSL
Mike Bird writes: I looked at your resolv.conf in your earlier post and I don't see a problem. What problem do you see? He has no default route. -- John Hasler -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pppoeconf / Verizon DSL
Larry writes: I still can't do it because IE running under Wine won't download ActiveX. Try using Firefox again. Ignore any instructions Verizon gave you. I still don't have access to the Internet, but I think it's because I was never able to complete the modem setup on the Verizon site. You don't do any setup on any Verizon site. You do it on the Web server inside the modem by putting your username and password in the right places so that the modem can authenticate to Verizon. It sounds like you did that. However, it also sounds like you have no default route, probably as a side effect of your experiments with PPPoE. -- John Hasler -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Intel's Lantencytop
From the Linux Audio User's List: I've came across with this announce of Latencytop in osnews http://www.latencytop.org/ could this app be useful for GNU/Linux musicians? My reply the LAU list: Look really interesting if one wants to play with the system at a low level. Might not be for the faint-of-heart. This requires kernel patches. Does anyone know how these effect/interfere with Ingo's RT patches which I assume we are all using? If anyone is playing with this, keep us all informed, and please post detailed descriptions of what you did and how. This utility is from Intel! I would hope they could publish more documentation than the little blurb on this site. To Debian Users: This is not just for audio but for file-system issues, graphics issues, etc. Since we have a low-latency desktop kernel option, such fine-tuning could be useful here too. Anyone have experience with this? Similar packages already in Debian? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Troubles with Apache 2 And Subversion (Etch)
Hello, I'm in troubles for installing Apache 2 and Subversion on my Debian Etch server (with SSL). My goal is to create a repository which I can access from the web and use with Trac. When I try to connect to subversion through https I get a 403 from nowhere. And this in apache2/error.log : [Sun Jan 20 12:07:34 2008] [error] [client XX.XX.XX.XX] Access denied: - GET svn:/ My subversion repository is in /srv/svn/corewar and is handled by www-data. (created with svnadmin) I have tried and mixed several things in my Apache vhost to finally have this : http://www.mousur.org/pastebin/index.php?show=151 Here is my enabled modules : alias.load authz_default.loadauthz_user.load dav.load dir.conf mime.load perl.load setenvif.load status.load auth_basic.load authz_groupfile.load autoindex.load dav_svn.conf dir.load mod_python.load php5.conf ssl.conf authn_file.load authz_host.load cgi.load dav_svn.load env.load negotiation.load php5.load ssl.load I'm running out of ideas, :X NB : I can access to https://corewar.kalessin.fr/ and display an index. -- Louis OPTER, aka, Kalessin - Clef PGP : 0x58AA6712 signature.asc Description: Ceci est une partie de message numériquement signée
Re: Intel's Lantencytop
* David Baron [EMAIL PROTECTED] [2008 Jan 20 08:24 -0600]: This is not just for audio but for file-system issues, graphics issues, etc. Since we have a low-latency desktop kernel option, such fine-tuning could be useful here too. Anyone have experience with this? Similar packages already in Debian? The low latency option is available in the kernel, but not using the stock Debian kernels. It appears that two options exist, CONFIG_PREEMPT_VOLUNTARY and CONFIG_PREEMPT. A good description of each is at: http://www.linuxtopia.org/online_books/linux_kernel/kernel_configuration/ch12.html Of the two, the latter appears to be for low-latency or embedded desktop systems. At this point the Debian maintainers seem to have decided against activating either of the two PREEMPT options above. See this report for reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=375845 So, if a low-latency desktop is desired using Debian, a custom kernel must be built. - Nate -- The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: problems after latest etch3 xserver upgrade
Upgrade again. It's fixed now. For details eee my post entitled Update: Re: GTK update problems. The fix made into the archives yesterday. Angus Auld wrote: Greetings, I had no apparent problems with the xserver-xorg-core/xnest upgrade from 2:1.1.1-21etch1 2:1.1.1-21etch2, but with the latest upgrade to 2:1.1.1-21etch3 I have noted that I am no longer able to use vlc media player. I got BadAlloc error. I forced a downgrade to the 2:1.1.1-21etch1 (why wasn't I given an option to downgrade to the etch2? It isn't shown at all). Alas, vlc still refuses to run and I get the BadAlloc error. I haven't noticed any other anomolies besides with vlc. How can I get my vlc back? Any thoughts greatly appreciated. TIA. -- Angus ##Linux Laptop powered by Debian Linux## ###Reg. Linux User #278931### Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Kern.log flooded with 'usb: uevent' messages
After last night's dist-upgrade of my debian-testing box, kern.log (and other logfiles where kernel messages are directed by syslogd-ng) gets continuously flooded with the following 'usb: uevent' messages Jan 20 12:50:22 silver kernel: [ 5913.971318] usb usb1: uevent Jan 20 12:50:22 silver kernel: [ 5913.971764] usb 1-10: uevent Jan 20 12:50:22 silver kernel: [ 5913.972235] usb usb1: uevent Jan 20 12:50:22 silver kernel: [ 5913.972674] usb 1-9: uevent Jan 20 12:50:22 silver kernel: [ 5913.973067] usb usb1: uevent Jan 20 12:50:22 silver kernel: [ 5913.973489] usb usb2: uevent Jan 20 12:50:25 silver kernel: [ 5916.970134] usb usb1: uevent Jan 20 12:50:25 silver kernel: [ 5916.970590] usb 1-10: uevent Jan 20 12:50:25 silver kernel: [ 5916.971013] usb usb1: uevent Jan 20 12:50:25 silver kernel: [ 5916.971463] usb 1-9: uevent Jan 20 12:50:25 silver kernel: [ 5916.971883] usb usb1: uevent Jan 20 12:50:25 silver kernel: [ 5916.972309] usb usb2: uevent Jan 20 12:50:28 silver kernel: [ 5919.969012] usb usb1: uevent Jan 20 12:50:28 silver kernel: [ 5919.969474] usb 1-10: uevent Jan 20 12:50:28 silver kernel: [ 5919.969900] usb usb1: uevent Jan 20 12:50:28 silver kernel: [ 5919.970325] usb 1-9: uevent Jan 20 12:50:28 silver kernel: [ 5919.970725] usb usb1: uevent Jan 20 12:50:28 silver kernel: [ 5919.971131] usb usb2: uevent Jan 20 12:50:31 silver kernel: [ 5922.971667] usb usb1: uevent Jan 20 12:50:31 silver kernel: [ 5922.972137] usb 1-10: uevent Jan 20 12:50:31 silver kernel: [ 5922.972550] usb usb1: uevent Jan 20 12:50:31 silver kernel: [ 5922.972955] usb 1-9: uevent Jan 20 12:50:31 silver kernel: [ 5922.973354] usb usb1: uevent Jan 20 12:50:31 silver kernel: [ 5922.973747] usb usb2: uevent Jan 20 12:50:34 silver kernel: [ 5925.970286] usb usb1: uevent Jan 20 12:50:34 silver kernel: [ 5925.970732] usb 1-10: uevent Jan 20 12:50:34 silver kernel: [ 5925.971143] usb usb1: uevent Jan 20 12:50:34 silver kernel: [ 5925.971563] usb 1-9: uevent Jan 20 12:50:34 silver kernel: [ 5925.971966] usb usb1: uevent Jan 20 12:50:34 silver kernel: [ 5925.972411] usb usb2: uevent This phenomenon occurs with the 2.6.22.10 kernel and also with the newest stable kernel, 2.6.23.14. It even occurs, when all usb-devices are disconnected. Hopefully you can give me some clue what's going on. Thanks in advance! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]