Re: linphone et routeur
Bonjour, excuses-moi Daniel, j'aurais dû en effet commencer par là. En fait, je vois le problème en lisant les message de debug de linphone. En fait, derière mon routeur (ailleurs, ça marche parfaitement), ortp résoud le dns de freephonie.net ; puis envoie son message de connexion sip à mon compte sur freephonie.net ; reçoie la réponse : sip/2.0 401 unauthorized dans le bloc suivant je trouve les warnig et erreur suivantes : ortp-warning Could not set headers: via: nonce=... ortp-error end of header not found ortp-error error in msg_headers_parse() ortp-error could not parse message cette boucle est refaite plusieurs fois et cela se conclue par : ortp-message registration_failure Sinon, je n'utilise pas le STUN. Amicalement, Antoine. Le 21/04/11, Antoine Vagabonddurailvagabonddur...@gmail.com a écrit : Bonjour, j'utilise linphone pour me connecter au service sip de free (freephonie.net). Je n'ai jamais eu de problèmes jusqu'à il y a peu quand j'ai disposé d'un nouveau routeur dsl. C'est un speedstream 5200. J'ai d'abord pensé à un problème de firewall et je l'ai désactivé mais rien a changé. Peut-être un problème avec la translation NAPT que j'utilise ? Je n'ai rien trouvé à ce sujet sur le net. Quelqu'un aurait-il une idée ? Amicalement, Antoine. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=-gxvx2-_xnh8e2r4yz4m2cju...@mail.gmail.com
Re: bash et lancement script python
Le 23 avril 2011, Jean-Jacques Doti a écrit : Salut, On Sat, 23 Apr 2011 17:03:29 +0200, Alain Rpnpif wrote: Bonjour, Depuis toujours quand je mettais en première ligne d'un script python : #!/usr/bin/python Python était lancé sur le script. Pourquoi maintenant (Debian Squeeze), la commande ./monscript.py donne : line 1: #!/usr/bin/python: Aucun fichier ou dossier de ce type $ sh ./monscript.py ./monscript.py: 1: #!/usr/bin/python: not found $ bash ./monscript.py ./monscript.py: line 1: #!/usr/bin/python: Aucun fichier ou dossier de ce type $ which python /usr/bin/python python monscript.py marche. Je ne comprends pas. Auriez-vous une explication ? À tout hasard, est-ce que ton script aurait pu transiter par une machine Windows ou bien être transmis par mail ? Dans ce cas, il est possible que les fins de ligne Unix (LF) aient été remplacés par des fins de ligne Windows (CR-LF). Si c'est le cas, la première ligne de ton script est vue comme #!/usr/bin/pythonCR et c'est donc /usr/bin/pythonCR qui est cherché au lieu de /usr/bin/python. Pour vérifier, affiche ton script avec un éditeur hexadécimal (ou tape od -c -tx1 monscript.py dans un terminal) et regarde si les \n sont précédés par des \r. Au pire, lance simplement un dos2unix monscript.py : si le soucis est bien là, ça le réglera (et quoi qu'il en soit, ça ne casse rien). Merci Jean-Jacques. Le problème était bien de ce style : des octets non affichables mais en début de fichier ! Le fichier litigieux : EF BB BF 23 │ 21 2F 75 73 │ 72 2F 62 69 │ 6E 2F 70 79 . #!/usr/bin/py 0010 74 68 6F 6E │ 0A thon Un fichier qui se lance normalement : 23 21 2F 75 │ 73 72 2F 62 │ 69 6E 2F 70 │ 79 74 68 6F #!/usr/bin/pytho 0010 6E 0A n C'est de ma faute : je l'avais affiché avec Abiword et bêtement enregistré ce qui a ajouté ces caractères (il aurait dû le laisser en format brut). Un truc marrant : la commande file affiche ceci 1: Python script text executable 2: a /usr/bin/python script text executable ce qui a pu trompé. Encore merci. -- Alain Rpnpif -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110425093807.4e231...@arrcuis.home
Re: [HS] Pertes importantes de mail depuis gmail.
Le 24 avril 2011, Antoine Vagabonddurail a écrit : Bonjour, je viens de faire un tesst peut-être intéressant. A un ami situé également en Turquie et utilisant également gmail j'ai envoyé 2 mails. Le premier directement depuis ma liste de contact ; le second en répondant à un de ses mails précédent. Le premier n'est pas arrivé ; le second oui. Reprenons les 2 hypothèses : je serai surpris d'être concidéré comme spameur par le fait que j'utilise gmail avec une ip turque par une boîte disposant des mêmes caractéristiques, d'un autre côté c'est une option séduisante, une réponse à un mail passe forcément le filtre puisque sollicité par une demande précédente alors qu'un mail direct peut bien être bloqué, dans ce cas pourquoi mon ip turuqe poserait-elle problème ; pour la censure, serait-ce logique de censurer l'envoi direct mais pas la réponse, cela me paraît pas évident, bien qu'une réponse puisse peut-être passer plus librement car réponse à une demande. Bonjour, Et en essayant après inscription avec un autre serveur que gmail, toujours en webmail ? -- Alain Rpnpif -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110425095413.7f8c5...@arrcuis.home
Re: linphone et routeur
Le 25/04/2011 09:17, Antoine Vagabonddurail a écrit : Bonjour, Bonjour [...] En fait, derière mon routeur (ailleurs, ça marche parfaitement), Ton routeur étant la cause du problème et ne le connaissant pas, je ne peux plus t'aider. Éventuellement tu peux jouer avec la MTU (la baisser 1492 voir moins), dans les préférences de linphone. [...] Sinon, je n'utilise pas le STUN. Tu as une adresse IP fixe alors que tu as saisi? Ou ton modem est il configuré en pont? -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4db52fcb.1040...@tootai.net
Wheezy
Je suis passé de squeeze a wheezy sans problème. Sauf que maintenant je ne peux télécharger les mises en jour (Actuellement 177 mises a jour sont impossibles a télé charger. J'obtiens les messages suivants : installation interrompue le sous processus script post-installation install a retourné une erreur de sortie d'état 127 et install Archives() failed Où chercher, où trouver la solution. Merci d'avance. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/19336273.92748.1303723361441.JavaMail.www@wwinf1d06
Re: Wheezy
Le Mon, 25 Apr 2011 11:22:41 +0200 (CEST), Albert DURANTON albert.duranton...@orange.fr a écrit : bonjour Je suis passé de squeeze a wheezy sans problème. Sauf que maintenant je ne peux télécharger les mises en jour (Actuellement 177 mises a jour sont impossibles a télé charger. J'obtiens les messages suivants : installation interrompue le sous processus script post-installation install a retourné une erreur de sortie d'état 127 et install Archives() failed Où chercher, où trouver la solution. Merci d'avance. qu'est ce que tu utilises comme gestionnaire de mises à jour ? -- Cordialement Jean-Louis Giraud jlaur.gir...@infonie.fr -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110425120954.6108fb3e@cyrano
whois IP ne répond plus
Bonjour, la commande whois IP ne fonctionne plus sur ma Debian Lenny 32 bits (quelquesoit le n° IP) Une fois la commande tapée [entrer], le curseur se place en dessous, sans réponse ... = CTRL-C ... Merci. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201104251212.04020.cor...@free.fr
Re: Wheezy
Bonjour, Je suis passé de squeeze a wheezy sans problème. Sauf que maintenant je ne peux télécharger les mises en jour (Actuellement 177 mises a jour sont impossibles a télé charger. J'obtiens les messages suivants : installation interrompue le sous processus script post-installation install a retourné une erreur de sortie d'état 127 et install Archives() failed Où chercher, où trouver la solution. Certains dépôts ne sont apparemment pas cohérents ce matin. Patience... :-) Pour information, mon /etc/apt/sources.list : # testing deb http://ftp.fr.debian.org/debian/ testing main contrib non-free deb http://ftp.fr.debian.org/debian/ testing-proposed-updates main contrib non-free deb http://security.debian.org/ testing/updates main contrib non-free # stable deb http://ftp.fr.debian.org/debian/ stable main contrib non-free deb http://ftp.fr.debian.org/debian/ squeeze-proposed-updates main contrib non-free deb http://security.debian.org/ stable/updates main contrib non-free deb http://ftp.fr.debian.org/debian squeeze-updates main contrib non-free deb http://backports.debian.org/debian-backports squeeze-backports main contrib non-free Cordialement, [CITATION ALÉATOIRE : Qu'est ce que les gens font à un rendez-vous ? Au premier rendez-vous ils se disent des mensonges intéressants, comme ça ils sont d'accord pour avoir un deuxième rendez-vous. Martin, 10 ans] -- Pierre Crescenzo mailto:pie...@crescenzo.nom.fr http://www.crescenzo.nom.fr/ -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/87y62ylk53@tpol.unice.fr
Re: Wheezy
Albert DURANTON albert.duranton...@orange.fr writes: Je suis passé de squeeze a wheezy sans problème. Sauf que maintenant je ne peux télécharger les mises en jour (Actuellement 177 mises a jour sont impossibles a télé charger. J'obtiens les messages suivants : installation interrompue le sous processus script post-installation install a retourné une erreur de sortie d'état 127 et install Archives() failed Une copie plus complète de ce qui c'est passé avant serait utile pour pouvoir répondre à la question, au moins les 10/20 dernières lignes. -- Rémi Vanicat -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/87bozuharc@debian.org
Re: whois IP ne répond plus
On Mon, Apr 25, 2011 at 12:12:03PM +0200, cor...@free.fr cor...@free.fr wrote a message of 17 lines which said: la commande whois IP ne fonctionne plus sur ma Debian Lenny 32 bits (quelquesoit le n° IP) % cat /etc/debian_version 5.0.8 % whois 87.88.6.218 .. inetnum:87.88.6.0 - 87.88.6.255 netname:POOL-DEF92-1-1 descr: Pool for broadband customers on DSLAM def92-1 Bref, c'est un problème chez vous. Je suggère de tester avec strace et tcpdump. strace whois 87.88.6.218 se bloque sur quoi ? Pendant le whois, que donne un tcpdump port 43 dans une autre fenêtre ? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110425153923.ga2...@sources.org
Re: whois IP ne répond plus
Le lundi 25 avril 2011, Stephane Bortzmeyer a écrit :
On Mon, Apr 25, 2011 at 12:12:03PM +0200,
cor...@free.fr cor...@free.fr wrote
a message of 17 lines which said:
la commande whois IP ne fonctionne plus sur ma Debian Lenny 32
bits (quelquesoit le n° IP)
% cat /etc/debian_version
5.0.8
% whois 87.88.6.218
inetnum:87.88.6.0 - 87.88.6.255
netname:POOL-DEF92-1-1
descr: Pool for broadband customers on DSLAM def92-1
Bref, c'est un problème chez vous. Je suggère de tester avec strace et
tcpdump.
strace whois 87.88.6.218 se bloque sur quoi ? Pendant le whois, que
donne un tcpdump port 43 dans une autre fenêtre ?
--
# strace whois 87.88.6.218
execve(/usr/bin/whois, [whois, 87.88.6.218], [/* 42 vars */]) = 0
brk(0) = 0x83fe000
access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or directory)
socket(PF_INET6, SOCK_STREAM, IPPROTO_TCP) = 3
connect(3, {sa_family=AF_INET6, sin6_port=htons(43),
inet_pton(AF_INET6, 2001:67c:2e8:22::c100:687, sin6_addr), sin6_flowinfo=0,
sin6_scope_id=0}, 28
(blocage ...)
# tcpdump port 43
tcpdump: WARNING: wmaster0: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on wmaster0, link-type IEEE802_11 (802.11), capture size 96 bytes
(blocage ...)
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org
Archive: http://lists.debian.org/201104252255.46813.cor...@free.fr
Re: whois IP ne répond plus
On Mon, Apr 25, 2011 at 10:55:46PM +0200,
cor...@free.fr cor...@free.fr wrote
a message of 47 lines which said:
# strace whois 87.88.6.218
J'ai oublié de dire qu'un -f après strace aurait aidé.
connect(3, {sa_family=AF_INET6, sin6_port=htons(43),
inet_pton(AF_INET6, 2001:67c:2e8:22::c100:687, sin6_addr),
sin6_flowinfo=0, sin6_scope_id=0}, 28
(blocage ...)
Problème de connectivité ? 2001:67c:2e8:22::c100:687 est le serveur
whois du RIPE. Que donne un tcptraceroute 2001:67c:2e8:22::c100:687
43 (ou, à la rigueur, traceroute6 2001:67c:2e8:22::c100:687) ?
# tcpdump port 43
tcpdump: WARNING: wmaster0: no IPv4 address assigned
Ajouter '-i XXX' où XXX est l'identifiant de l'interface réseau
utilisée... (sans doute eth0)
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org
Archive: http://lists.debian.org/20110425210217.ga17...@sources.org
Re: whois IP ne répond plus
J'ai oublié de dire qu'un -f après strace aurait aidé :
strace -f whois 87.88.6.218
socket(PF_INET6, SOCK_STREAM, IPPROTO_TCP) = 3
connect(3, {sa_family=AF_INET6, sin6_port=htons(43),
inet_pton(AF_INET6, 2001:67c:2e8:22::c100:687, sin6_addr), sin6_flowinfo=0,
sin6_scope_id=0}, 28
(blocage ...)
Problème de connectivité ? 2001:67c:2e8:22::c100:687 est le serveur
whois du RIPE.
Voici :
Que donne un tcptraceroute 2001:67c:2e8:22::c100:687 :
# tcptraceroute 2001:67c:2e8:22::c100:687
traceroute to 2001:67c:2e8:22::c100:687 (2001:67c:2e8:22::c100:687), 30 hops
max, 40 byte packets
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
43 (ou, à la rigueur, traceroute6 2001:67c:2e8:22::c100:687) ?
# traceroute6 2001:67c:2e8:22::c100:687
traceroute to 2001:67c:2e8:22::c100:687 (2001:67c:2e8:22::c100:687), 30 hops
max, 40 byte packets
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
# tcpdump port 43
tcpdump: WARNING: wmaster0: no IPv4 address assigned
Ajouter '-i XXX' où XXX est l'identifiant de l'interface réseau
utilisée... (sans doute eth0) :
# tcpdump -vv -i wlan0 port 43
tcpdump: listening on wlan0, link-type EN10MB (Ethernet), capture size 96 bytes
(blocage ...)
Merci.
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org
Archive: http://lists.debian.org/201104252345.48174.cor...@free.fr
Re: linphone et routeur
Bonjour, merci encore Daniel, je me doute qu'il daudrait plus d'éléments pour avancer. En fait, mon routeur est un speedstream 5200. Un modem/routeur DSL ethernet/usb que j'ai récupéré ici en Turquie en second main, et quand je dis second main c'est certainement un dous euphémisme. La chose se connecte en pppoe chez mon provider et me re-sert la connexion sur un lan par napt. Je suis en mode napt avec le firewall level off soit qui laisse tout sortir, et entrer seulement ce qui relève d'une précédente requête sortante. Les autres niveau de firewall se proposent de limiter les ports sortant possibles soit par une préconfiguration (low,medium,high) soit par sélection de ses règles par l'utilisateur (custom). J'ai peut-être une idée. Dites-moi ce qu'elle vaut. Cet objet est une antiquité, je n'ai pas la date de construction (l'étiquette a beaucoup perdu de son caractère proclamatoire avec le temps) mais je pense après recherche sur le net que l'on peut sans doute tabler sur 2004 voir 2003. Ne serait-ce dans ce cas là pas tout simplement le sip ALGs qui ne permettrait pas de passer la nouvelle version du sip ??? Amicalement, Antoine. Le 21/04/11, Antoine Vagabonddurailvagabonddur...@gmail.com a écrit : Bonjour, j'utilise linphone pour me connecter au service sip de free (freephonie.net). Je n'ai jamais eu de problèmes jusqu'à il y a peu quand j'ai disposé d'un nouveau routeur dsl. C'est un speedstream 5200. J'ai d'abord pensé à un problème de firewall et je l'ai désactivé mais rien a changé. Peut-être un problème avec la translation NAPT que j'utilise ? Je n'ai rien trouvé à ce sujet sur le net. Quelqu'un aurait-il une idée ? Amicalement, Antoine. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/banlktikrw+movkamisvcqoq3lgv0ry6...@mail.gmail.com
Re: bacula. salvas
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 EMNI Yoan García Cáceres escribió: Hola lista. Tengo un servidor de salvas bacula. El mismo hace las salvas bien. Existe algun sofware que sea capaz de reconocer un volumen de bacula y manipularlo osea leer copiar archivos etc... ? Buenos días Para extraer el contenido de una cinta y ver que tiene [1] : # Parte de la web, por si no tienes internet ### bextract If you find yourself using bextract, you probably have done something wrong. For example, if you are trying to recover a file but are having problems, please see the Restoring When Things Go Wrong section of the Restore chapter of this manual. Normally, you will restore files by running a Restore Job from the Console program. However, bextract can be used to extract a single file or a list of files from a Bacula tape or file. In fact, bextract can be a useful tool to restore files to an empty system assuming you are able to boot, you have statically linked bextract and you have an appropriate bootstrap file. Please note that some of the current limitations of bextract are: It cannot restore access control lists (ACL) that have been backed up along with the file data. It cannot restore Win32 non-portable streams (typically default). It cannot restore encrypted files. The command line length is relatively limited, which means that you cannot enter a huge number of volumes. If you need to enter more volumes than the command line supports, please use a bootstrap file (see below). It is called: Usage: bextract [-d debug_level] device-name directory-to-store-files -b file specify a bootstrap file -dnnset debug level to nn -e file exclude list -i file include list -p proceed inspite of I/O errors -V specify Volume names (separated by |) -? print this message where device-name is the Archive Device (raw device name or full filename) of the device to be read, and directory-to-store-files is a path prefix to prepend to all the files restored. NOTE: On Windows systems, if you specify a prefix of say d:/tmp, any file that would have been restored to c:/My Documents will be restored to d:/tmp/My Documents. That is, the original drive specification will be stripped. If no prefix is specified, the file will be restored to the original drive. Extracting with Include or Exclude Lists Using the -e option, you can specify a file containing a list of files to be excluded. Wildcards can be used in the exclusion list. This option will normally be used in conjunction with the -i option (see below). Both the -e and the -i options may be specified at the same time as the - -b option. The bootstrap filters will be applied first, then the include list, then the exclude list. Likewise, and probably more importantly, with the -i option, you can specify a file that contains a list (one file per line) of files and directories to include to be restored. The list must contain the full filename with the path. If you specify a path name only, all files and subdirectories of that path will be restored. If you specify a line containing only the filename (e.g. my-file.txt) it probably will not be extracted because you have not specified the full path. For example, if the file include-list contains: /home/kern/bacula /usr/local/bin Then the command: ./bextract -i include-list -V Volume /dev/nst0 /tmp will restore from the Bacula archive /dev/nst0 all files and directories in the backup from /home/kern/bacula and from /usr/local/bin. The restored files will be placed in a file of the original name under the directory /tmp (i.e. /tmp/home/kern/bacula/... and /tmp/usr/local/bin/...). Mediante la interface BAT no puedo restaurar archivos de hace un mes o dos meses atras, en el *version browser* solo me deja marcar los del mes actual, por que?? No entiendo bien tu pregunta, si puedes explicarla un poco mas. Podremos intentar ver algo. De todas formas existe una lista de bacula en castellano ( y contesta el desarrollador y todo XD ) bacula-users...@lists.sourceforge.net [1] http://www.lllf.uam.es/~antonio/documentos/bacula/dev-manual/Volume_Utility_Tools.html#SECTION00396 saludos, Saludos - -- Si los tontos volaran, el cielo se oscurecería No me envié correos en formatos propietarios http://www.gnu.org/philosophy/no-word-attachments.es.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJNtUwJAAoJEOWNzQnqy+fzfocIAJUhiUk13B8Nla44yc1C5XG+ 4hp8i3//oZzkNLnO6LMrXPbQzeJLhKZseBvZYQNrt/zrurR3U16+TXXCIBVbHxug ACipvEJCZsCuqDyvJN+keQIUNoEm00LtPzVNs5h0eQDyQnk1B17AHiumgGRtwZBY oOHB2TOXNePryPJhu8gsw4n3GUXJeqqbOX0YniSaStpi0q4LuMeZH0+oPIhITElJ /yYYjPqwdrtqNiK/thCTopSum7iV5Ug6ALLLaawBMSgWnPQhDkw2YEOPzlGj2p85
Re: Sonido en Debian 6
El Sun, 24 Apr 2011 23:23:46 +0200, AngelD escribió: Sun, 24 Apr 2011, Usuario Debian: La buena noticia es que Google esta dando pasas para olvidar Flash y usar estandares abiertos en relacion a video en internet, ya queda menos! Que San W3C te oiga :-) Bueno, si crees que a flash le queda poca vida, ..., mira como funcionan las alternativas (HTL5, gnash, ...) y verás que aparte de no cubrir todo el espectro del mismo, no son todavía alternativas. Siento decirlo pero nos queda flash para mucho rato. Yo tampoco le auguro futuro alguno a flash. Quizá mantenga alguna cuota de mercado en el segmento del entretenimiento (aplicaciones, videojuegos o sistemas integrados -televisores, etc...-) gracias en parte a los desarrolladores vaguetes que prefieren tirar por lo sencillo antes que por lo bueno, pero para vídeos puros y duros que al fin y al cabo es lo que más abunda por la webe, también creo que le quedan dos telediarios. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.10.45...@gmail.com
Re: bacula. salvas
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
jmramirez (mas_ke_na) escribió:
Mediante la interface BAT no puedo restaurar archivos de hace un mes o
dos meses atras, en el *version browser* solo me deja marcar los del mes
actual, por que??
Buenas.
Ahora que estoy mas despierto creo entender lo que dices. Tienes
que asegurarte que los backups se guardan el tiempo que TU estimas
oportuno. Te paso este link [1] que te dará mas información.
[1] http://www.bacula.org/fr/dev-manual/Automatic_Volume_Recycling.html
Para que te hagas una idea. Yo guardo mis backups de un mes, pero tengo
cintas de mas por lo que hasta que no se quede sin cintas, no me
machacara las otras ( ya preparadas para reciclar SI HA PASADO un mes).
## Mi configuración /etc/bacula/bacula-dir.conf
# Default pool definition
Pool {
Name = Default
Pool Type = Backup
Recycle = yes # Bacula can automatically recycle
Volumes
AutoPrune = yes # Prune expired volumes
Volume Retention = 30 days # un mes .
Maximum Volume Bytes = 8G
LabelFormat = Incremental-${Day}${month}${year}
Volume Use Duration = 30 days
Catalog Files = yes
recycle Oldest Volume = yes
Purge Oldest Volume = yes
A groso modo dice:
Recycle = yes puede reciclarla.
Autoprune = yes --- purgara la cinta para usarla de nuevo
Volume Retention = 30 days - No borrara nada hasta que no haya
pasado el tiempo marcado.
Un saludo
- --
Si los tontos volaran, el cielo se oscurecería
No me envié correos en formatos propietarios
http://www.gnu.org/philosophy/no-word-attachments.es.html
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJNtV3oAAoJEOWNzQnqy+fz0c8IANiRBUZzxqxQ+yhcmNCPqono
x08NVvNIsMlHw0iY5kxuB0WFWrJRVp9DkxhF0F6hZS9Md974AA4QtXdsvF9DEu+m
gaOzkVsIcfhqTu5Nl8EWaeK3AxZ/7jPnhdiwipPeXXudcWYnX5h7piQgu2UE13wY
J1jMCikT/6N9NRex2hHTG64lvR6YkdgYu6Z1ki3/VgU7YFCvT2qpeqCrugvljA8F
iBvhi6LttaFntOhRO8qHEAhtgA5s5FTQ2IL+6UWH1eADbhC1pc5LZkFy6VXEtDzS
et+LAl+RpjgFYMjDT54JyvrVp9IpdCqQ88aW8QsSlkqXbe8A5S1dsLoivJzCMW0=
=q2+D
-END PGP SIGNATURE-
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/blu0-smtp463d8581290363729f8938b1...@phx.gbl
Re: Sonido en Debian 6
El 25/04/11 07:45, Camaleón escribió: El Sun, 24 Apr 2011 23:23:46 +0200, AngelD escribió: Sun, 24 Apr 2011, Usuario Debian: La buena noticia es que Google esta dando pasas para olvidar Flash y usar estandares abiertos en relacion a video en internet, ya queda menos! Que San W3C te oiga :-) Bueno, si crees que a flash le queda poca vida, ..., mira como funcionan las alternativas (HTL5, gnash, ...) y verás que aparte de no cubrir todo el espectro del mismo, no son todavía alternativas. Siento decirlo pero nos queda flash para mucho rato. Yo tampoco le auguro futuro alguno a flash. Quizá mantenga alguna cuota de mercado en el segmento del entretenimiento (aplicaciones, videojuegos o sistemas integrados -televisores, etc...-) gracias en parte a los desarrolladores vaguetes que prefieren tirar por lo sencillo antes que por lo bueno, pero para vídeos puros y duros que al fin y al cabo es lo que más abunda por la webe, también creo que le quedan dos telediarios. Saludos, Yo sigo teniendo problemas con pulseaudio y flash. Claro que uso wheezy pero todas las aplicaciones me funcionan sin problemas con pulseaudio, el único que atora todo el sistema es flash que supuestamente tiene soporte para pulseaudio pero no he dado en la tecla para que funcione. Documentandose al respecto uno encuentra que pulseaudio es un proyecto muy necesario dentro del framework de audio de Linux. Viene a ser el compositor del sistema de audio como compiz y otros lo son al sistema gráfico. Yo también pienso que los tiempos van a ser bastante rápidos y la decadencia de flash es inminente. Si no hay que fijarse en los esfuerzos mismos que está haciendo Adobe por crear herramientas para convertir contenido flash a HTML5 Saludos -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db56d5f.5020...@uncu.edu.ar
Re: Sonido en Debian 6
El 24 de abril de 2011 12:18, Camaleón noela...@gmail.com escribió: El 2011-04-24 a las 10:48 -0600, Carlos Alvarez escribió: (reenvío) Yo hace poco tenia un problema similar. Instale con KDE, luego de esto entre en modo recovery y desinstale el KDE, par volver a instalarlo. Luego de esta instalacion, ingrese y todo funcionaba bien, pero cuando veía abría vídeos de youtube podía escuchar el sonido de dichos vídeos, pero si quería escuchar musica con Yuk, estas no se escuchaban. Esto me resultaba igual si primero utilizaba Yuk y después ingresaba a youtube, podía escuchar Yuk pero no youtube. Yo no pude arreglar nada, así que lo que hice fue reinstalar el sistema con KDE y ya no me dio ese problema Saludos, -- Camaleón Hace poco tuve un problema parecido con pulseaudio y flash en kde.. y me sirvió la solución que comentan en este hilo http://www.esdebian.org/foro/44666/problema-sonido-videos-youtube ...Saludos -- Rafael Laverde Not f'd — you won't find me on Facebook
RE: Problema con Lenny+Samba+Ldap como pDC
From: listas_quij...@hotmail.com To: debian-user-spanish@lists.debian.org Subject: Problema con Lenny+Samba+Ldap como pDC Date: Mon, 25 Apr 2011 18:10:26 + Estoy tratando de montar un server con samba como PDC usando a openldap para autentificarme en mi red de windows pero esto ha sido un caso imposible. Segui la guia de http://rolandpish.wordpress.com/2007/10/20/samba-pdc-openldap-en-debian-etch/ pero con lenny, para hacerlo. Segui todo bien y todo iba perfecto hasta el momento de tener que agregar mi primera maquina al dominio Despues de 5 dias peliandome con esto y muchas tazas de cafe u muchos otros errores me sale este error the user's password must be changed before logging of the first time. Y luego no me permite agregarme al dominio Me pase todo el feriado de SS tratando de ponerlo a funcionar pero es imposible ya no se que mas tocar o ver. Si necesitan los archivos de conf. con gusto los puedo postear o si alguien tiene una idea que por favor me digan algo. Ahora despues de reiniciar a windows me cambio el mensaje de error a Logon: Unlknown user name or bad password Alguna pista ?
Re: OpenOffice 3.3 [desẗrolliandonos]
- Original Message - From: Juan Wifi jawif...@gmail.com To: BasaBuru basab...@basatu.org Cc: debian-user-spanish@lists.debian.org Sent: Friday, April 22, 2011 7:23 PM Subject: Re: OpenOffice 3.3 [desẗrolliandonos] Este comentario fue una tremenda estupidez. Ahora, los cubanos no se quejen, ya que la mayoría de las páginas que no pueden acceder están bloqueadas desde de tro de Cuba y no desde afuera, son ustedes que no pueden salir y no que contenido no pueda entrar. Nada mas lejano de mi intención que dedendar a los yankees, que no se malinterprete. Saludos Juan Ha, ahora resulta que los que nos estamos bloqueando somos nosotros. Que estupides más adsurda. Quisiera que vinieras 1 día aquí qe te voy a llevar donde un amigo que tiene acceso a Internet para que veas quien tiene la razón, talvés existe en esta lista alguno que halla venido aquí y halla tratado de navegar desde una conexión de este país y lo halla podido contactar personalmente. Si no lo sabes el gobierno de los EUA se toma la facultad de poner en una lista a los países que no están a fabor de su política como terroristas y a eso los bloquea, y ese es el caso de Cuba. Siendo los EUA el mayor receptor y protector de los más connotados terroristas del mundo, o a caso no sabes de que familia era amigo Bid Laden? o no sabes que Luis Posada carriles quien mandó a poner 2 bombas en un avión de Cubana de Aviación y que lo ha confesado en más de 1 ocasión, incluso antes las camaras de televisión anda suelto y amparado por el gobierno de los EUA, el cual es solicitado por la justicia del gobierno Venezolando, país de donde se escapacó de una carcel con la ayuda de la CIA y no lo han devuelto para venezuela aun teniendo un contrato el gobierno de los EUA con Venezuela para este caso. Saludos = || ISMAEL || = PD: Este es mi último mensaje en este hilo, porque realmente muchos conocen lo planteado por mi, pero otros tienen oidos sordos y mucha menos intensión de recapacitar ante la verdad. Si alguno tiene otra duda puede escribirme al privado. To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=f-8vkj8n1n5pruzewsyvrb...@mail.gmail.com -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/8DE574FA8A8F40B29DD5BA7631CCAA6C@virpc05
Cuestiones de usuarios en login
Gente tengo el siguiente instale en una portátil algo vieja un debian 6. A eso le puse lxde. Ahora la cuestión es que quiero evitar que en la pantalla de login o acceso cuando te pide usuario y contraseña me figure el usuario que existe. Me acuerdo que eso se solucionaba de diferente formas. Por ejemplo en algún momento era tocando un comando que hacia algo sobre gdm. Luego eso se pudo solucionar marcando una opción en una ventana preferencia pantalla de identificación. Ahora bien fijándome por este ultimo método no me aparece la opción de deshabilitar que aparezcan los usuarios en la pantalla de login. Alguien sabe como se soluciona. Lo loco es que viendo otro lxde de otra distro aparece esa opción. Es rarísimo. -- Pablo
Re: OpenOffice 3.3 [desẗrolliandonos]
Que hilo tan eterno parenlo porfavor creo que hay otros espacios para que discutan, mandense privados que se yo, pero este hilo ya no tiene nada del título, Openoffice 3.3 LO RECUERDAN de eso era el hilo.
Re: Cuestiones de usuarios en login
2011/4/25 Pablo pablocar...@gmail.com: Gente tengo el siguiente instale en una portátil algo vieja un debian 6. A eso le puse lxde. Ahora la cuestión es que quiero evitar que en la pantalla de login o acceso cuando te pide usuario y contraseña me figure el usuario que existe. Me acuerdo que eso se solucionaba de diferente formas. Por ejemplo en algún momento era tocando un comando que hacia algo sobre gdm. Luego eso se pudo solucionar marcando una opción en una ventana preferencia pantalla de identificación. Ahora bien fijándome por este ultimo método no me aparece la opción de deshabilitar que aparezcan los usuarios en la pantalla de login. Alguien sabe como se soluciona. Lo loco es que viendo otro lxde de otra distro aparece esa opción. Es rarísimo. La configuración es en el gdmsetup, si es diferente en la otra distro será que están usando otro gestor de sesión? xdm, kdm o gdm3?. Otra opción que tienes es es por comandos, editar /etc/rc.local y añadir: su -l usuario -c startx Instala xinit si no lo tienes, y desinstala gdm (xdm o kdm si es el caso). Saludos -- Linux Registered User # 386081 A menudo unas pocas horas de Prueba y error podrán ahorrarte minutos de leer manuales. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktim5qet30hhqyxghm_f+_epu5a6...@mail.gmail.com
Re: Cuestiones de usuarios en login
2011/4/25 Carlos Zuniga carlos@gmail.com La configuración es en el gdmsetup, si es diferente en la otra distro Probando el gdmsetup me pasa lo mismo. Me sale una versión del mismo, pero por alguna extraña razón no me aparecen las mismas opciones que tengo en una maquina en donde si puedo lograr esto de que no me figuren la lista de usuarios. Lo raro es que en ambas maquinas tengo un lxde, pero se ve que en la que si puedo evitar la lista de usuarios en el login es una versión mas vieja de lxde. Cosa que en la versión de lxde de debian 6 no tengo. Descarto que se deba a la distribucion será que están usando otro gestor de sesión? xdm, kdm o gdm3?. Creo que es gdm Otra opción que tienes es es por comandos, editar /etc/rc.local y añadir: su -l usuario -c startx Voy a hacer la prueba y en una de esas si me sale aviso. Instala xinit si no lo tienes, y desinstala gdm (xdm o kdm si es el caso). Saludos -- Linux Registered User # 386081 A menudo unas pocas horas de Prueba y error podrán ahorrarte minutos de leer manuales. Voy a seguir probando. Gracias por el dato -- Pablo
Re: OpenOffice 3.3 [desẗrolliandonos]
El día 25 de abril de 2011 16:52, Juan Pablo Jaramillo Pineda juanpablo...@gmail.com escribió: Que hilo tan eterno parenlo porfavor creo que hay otros espacios para que discutan, mandense privados que se yo, pero este hilo ya no tiene nada del título, Openoffice 3.3 LO RECUERDAN de eso era el hilo. Hay que dejar que este hilo muera solo, se aburriran y dejaran de responder :) Saludos Cordiales. -- Roberto Quiñones Owner - Service Manager and System ACShell.NET – Internet Services robe...@acshell.net - www.acshell.net San Martin #311 Santiago – CL (Chile) +560981361713 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=tthcc3uw2ytvgm96b4gry7yh...@mail.gmail.com
LTO y SAN compatibles con Linux
Hola trabajo en pg y me pidieron que eligiera unas LTO y un SAN para comprar... preferiblemente HP (aunque nuestros servidores son IBM... sin embargo no creo que haya problemas). Necesito que me digan sobre un sitio que me recomienden, yo he buscado pero mi problema es que no se si tengan soporte para linux. Espero sus sugerencias... PD: hay dinero suficiente -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktik3vwka7go5b9_xs8+nnafoy2q...@mail.gmail.com
modulo acerhk
Tengo un portatil antiguo Aopem 1557 con Debian Testing, para levantar la
red wifi necesita instalar el módulo acerhk que mapea las teclas especiales
y una de ella es la de la red inalambrica. Con el kernel 2.6.32-5 se instaló
perfectamente con module-assistant.
Ha estado funcionando hasta que se a actualizado al kernel 2.6.38-2, y ahora
no se activa con la tecla. Con lsmod no aparece y si hago un modprobe acerhk
me dice Module acerhk not found.
He intentado instalarlo de nuevo con m-a, pero la compilación no progresa,
el terminal se queda en 0.
El log en /var/cache/modass/ es este:
/usr/bin/make clean
make[1]: se ingresa al directorio `/usr/src/modules/acerhk'
rm -f *~ *.o *.s *.ko .acerhk* *.mod.c
make[1]: se sale del directorio `/usr/src/modules/acerhk'
/usr/bin/make -f debian/rules kdist_clean kdist_config binary-modules
make[1]: se ingresa al directorio `/usr/src/modules/acerhk'
/usr/bin/make clean
make[2]: se ingresa al directorio `/usr/src/modules/acerhk'
rm -f *~ *.o *.s *.ko .acerhk* *.mod.c
make[2]: se sale del directorio `/usr/src/modules/acerhk'
for templ in ; do \
cp $templ `echo $templ | sed -e 's/_KVERS_/2.6.38-2-686/g'` ; \
done
for templ in `ls debian/*.modules.in` ; do \
test -e ${templ%.modules.in}.backup || cp ${templ%.modules.in} ${templ%.
modules.in}.backup 2/dev/null || true; \
sed -e 's/##KVERS##/2.6.38-2-686/g ;s/#KVERS#/2.6.38-2-686/g ;
s/_KVERS_/2.6.38-2-686/g ; s/##KDREV##/2.6.38-3/g ; s/#KDREV#/2.6.38-3/g ;
s/_KDREV_/2.6.38-3/g ' $templ ${templ%.modules.in}; \
done
dh_testroot
dh_clean -k
dh_clean: dh_clean -k is deprecated; use dh_prep instead
dh_installdirs lib/modules/2.6.38-2-686/misc
export KERNELSRC=/lib/modules/2.6.38-2-686/build
/usr/bin/make KERNELSRC=/lib/modules/2.6.38-2-686/build
KERNELVERSION=2.6.38-2-686
make[2]: se ingresa al directorio `/usr/src/modules/acerhk'
/usr/bin/make -C /lib/modules/2.6.38-2-686/build
SUBDIRS=/usr/src/modules/acerhk modules
make[3]: se ingresa al directorio `/usr/src/linux-headers-2.6.38-2-686'
CC [M] /usr/src/modules/acerhk/acerhk.o
/usr/src/modules/acerhk/acerhk.c:39:26: error: linux/config.h: No existe el
fichero o el directorio
/usr/src/modules/acerhk/acerhk.c: In function ‘init_input’:
/usr/src/modules/acerhk/acerhk.c:2261: warning: ignoring return value of
‘input_register_device’, declared with attribute warn_unused_result
/usr/src/modules/acerhk/acerhk.c: At top level:
/usr/src/modules/acerhk/acerhk.c:2941: error: unknown field ‘ioctl’
specified in initializer
/usr/src/modules/acerhk/acerhk.c:2941: warning: initialization from
incompatible pointer type
make[6]: *** [/usr/src/modules/acerhk/acerhk.o] Error 1
make[5]: *** [_module_/usr/src/modules/acerhk] Error 2
make[4]: *** [sub-make] Error 2
make[3]: *** [all] Error 2
make[3]: se sale del directorio `/usr/src/linux-headers-2.6.38-2-686'
make[2]: *** [acerhk.ko] Error 2
make[2]: se sale del directorio `/usr/src/modules/acerhk'
make[1]: *** [binary-modules] Error 2
make[1]: se sale del directorio `/usr/src/modules/acerhk'
make: *** [kdist_build] Error 2
en la línea 28 veo esto:
/usr/src/modules/acerhk/acerhk.c:39:26: error: linux/config.h: No existe el
fichero o el directorio.
Si arranco con el kernel anterior no tengo ningún problema con la red wifi,
pero con ese kernel tengo problema con el puntero del ratón que se hace
invicible.
El módulo de la tarjeta está activado es una ipw2200.
Un saludo
Gracias
Pedro
RE: Problema con Lenny+Samba+Ldap como pDC
colega comienza desde el inicio, pero siguiendo esta guía http://www.esdebian.org/wiki/controlador-primario-dominio-pdc-debian-lenny-50-mediante-samba-pamnss-openldap y me dices. El lun, 25-04-2011 a las 18:23 +, Edwin Quijada escribió: __ From: listas_quij...@hotmail.com To: debian-user-spanish@lists.debian.org Subject: Problema con Lenny+Samba+Ldap como pDC Date: Mon, 25 Apr 2011 18:10:26 + Estoy tratando de montar un server con samba como PDC usando a openldap para autentificarme en mi red de windows pero esto ha sido un caso imposible. Segui la guia de http://rolandpish.wordpress.com/2007/10/20/samba-pdc-openldap-en-debian-etch/ pero con lenny, para hacerlo. Segui todo bien y todo iba perfecto hasta el momento de tener que agregar mi primera maquina al dominio Despues de 5 dias peliandome con esto y muchas tazas de cafe u muchos otros errores me sale este error the user's password must be changed before logging of the first time. Y luego no me permite agregarme al dominio Me pase todo el feriado de SS tratando de ponerlo a funcionar pero es imposible ya no se que mas tocar o ver. Si necesitan los archivos de conf. con gusto los puedo postear o si alguien tiene una idea que por favor me digan algo. Ahora despues de reiniciar a windows me cambio el mensaje de error a Logon: Unlknown user name or bad password Alguna pista ? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303771897.8232.0.camel@norverisnl
Re: Dirección IP estática se modifica * SOLUCIONADO
Hola gente: al final pude solucionar el problema que tenía en esta red... El 14/04/11 14:36, Roberto Quiñones escribió: Estimado, El día 14 de abril de 2011 14:21, Walter O. Dariwlin...@gmail.com escribió: Hola Roberto: El 14/04/11 14:06, Roberto Quiñones escribió: cuando asignastes la ip 192.168.0.80 te fijastes si dentro de tu lan estaba disponible, yo haria lo siguiente, pondria la 192.168.0.106 que es la que te esta asignando tu gateway y desde el mismo le tiro unos ping a la 192.168.0.80 para ver si esta disponible. Efectivamente, antes de asignarle la IP 192.168.0.106 a esta PC, hice ping a esa dirección para comprobar que no estuviera utilizada. La dirección del gateway es 192.168.0.1, esto lo comprobé en unas terminales que utilizan con XP y toman las direcciones por DHCP. La IP 192.168.0.80, salvo que al momento de hacer el ping esté asignada a la PC en cuestión, no responde, o sea que también está libre. Tengo pendiente una nueva visita al lugar, voy a ver si encuentro algo en el syslog, tal como me sugirió Camaleón. Saludos. Igualmente, Walter Lo más conveniente es justamente ir y chquear puesto que puede suceder que efectivamente la 192.168.0.80 este asignada y no por que te responda ping, puede suceder que no responda pero si esta asignada a un dispositivo de la red (descozco como esta conformada esa red). Pero si se que puede suceder que sea un equipo con ip y que este bloqueando los ping es decir paquetes ICMP. puede verificar también desde el mismo gateway si es un router o switch y verificar si esta en uso dicha ip. Nota: por eso es bueno tener un archivo con las listas de ip que tengo dentro de mi red :D Saludos Cordiales. Primeramente me estuve fijando el syslog, a continuación una partecita... Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: init! Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: update_system_hostname Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: adding mapping hotplug to well_known_interfaces Apr 18 07:47:01 debec NetworkManager[1243]:SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-687ed5bae28e Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: addresses count: 1 Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: adding eth0 to iface_connections Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: adding iface eth0 to well_known_interfaces Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: autoconnect En la línea siguiente, si se refiere a la configuración de la tarjeta de red, miente... existe el archivo interfaces y está configurada con IP fija Apr 18 07:47:01 debec NetworkManager[1243]:SCPluginIfupdown: management mode: unmanaged Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: devices added (path: /sys/devices/pci:00/:00:1c.1/:03:00.0/net/eth0, iface: eth0) Apr 18 07:47:01 debec NetworkManager[1243]:SCPluginIfupdown: locking wired connection setting Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Apr 18 07:47:01 debec NetworkManager[1243]:SCPlugin-Ifupdown: end _init. [...] Apr 18 07:47:05 debec kernel: [ 19.436509] eth0: no IPv6 routers present Apr 18 07:47:06 debec avahi-daemon[1457]: Found user 'avahi' (UID 106) and group 'avahi' (GID 109). Apr 18 07:47:06 debec avahi-daemon[1457]: Successfully dropped root privileges. Apr 18 07:47:06 debec avahi-daemon[1457]: avahi-daemon 0.6.27 starting up. Apr 18 07:47:06 debec avahi-daemon[1457]: Successfully called chroot(). Apr 18 07:47:06 debec avahi-daemon[1457]: Successfully dropped remaining capabilities. Apr 18 07:47:06 debec avahi-daemon[1457]: No service file found in /etc/avahi/services. Apr 18 07:47:06 debec avahi-daemon[1457]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::7271:bcff:fea3:49eb. Apr 18 07:47:06 debec avahi-daemon[1457]: New relevant interface eth0.IPv6 for mDNS. Apr 18 07:47:06 debec avahi-daemon[1457]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.80. Apr 18 07:47:06 debec avahi-daemon[1457]: New relevant interface eth0.IPv4 for mDNS. Apr 18 07:47:06 debec avahi-daemon[1457]: Network interface enumeration completed. Apr 18 07:47:06 debec avahi-daemon[1457]: Registering new address record for fe80::7271:bcff:fea3:49eb on eth0.*. Apr 18 07:47:06 debec avahi-daemon[1457]: Registering new address record for 192.168.0.80 on eth0.IPv4. Apr 18 07:47:06 debec avahi-daemon[1457]: Registering HINFO
Re: Montar hd's externos diferentes no fstab
Se a partição tiver sistema de arquivos ext2/3/4, basta usar: tune2fs -L rótulo dispositivo para definir um rótulo. -- Prof. Dr. Flávio M. Matsumoto UFPR - ET - Departamento de Química Caixa Postal 19050, 81531-990, Curitiba, PR. Linux user #66569 (http://counter.li.org) Em Dom, Abril 24, 2011 10:09 pm, Vinicius De Mario escreveu: O que eu faço é dar um rótulo a cada partição dos hds, assim quando monta vai aparecer o nome do rótulo, p.ex., backup1, backup2, etc. Acredito que com o Gparted seja possÃvel renomear o rótulo sem ter que reformatar, basta que o hd esteja desmontado, mas conectado. Vinicius -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/17e83809ba932ba4a1425b91f6663c1a.squir...@webmail.ufpr.br
Re: Montar hd's externos diferentes no fstab
Caro Cleber eu utilizo um HD Externo (da empresa) diariamente no meu notebook com Debian Squeeze + Gnome (utilizando o automount)... nunca tive problemas, a única coisa é que ele coloca um nome estranho no /media /dev/sdb1 on /media/af42445b-3daa-405f-84c4-38c868fc9296 type ext3 (rw,nosuid,nodev,uhelper=udisks) Porém acredito que se você colocar um rótulo como o Flavio citou esse nome não vai aparecer feiamente como o meu (que é gerado pelo sistema). Só não mudei isso por preguiça...pra mim não é tão necessário fazer isso :D Abraço! Em 25-04-2011 08:28, Flavio M Matsumoto escreveu: Se a partição tiver sistema de arquivos ext2/3/4, basta usar: tune2fs -Lrótulo dispositivo para definir um rótulo. -- Rafael Henrique da Silva Correia http://abraseucodigo.blogspot.com Administrador de Sistemas Linux Certificado pela LPIC - 101 ID: LPI000160699 -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db55c8b.90...@gmail.com
Re: Montar hd's externos diferentes no fstab
Em 24 de abril de 2011 22:09, Vinicius De Mario deb...@git.eti.brescreveu: O que eu faço é dar um rótulo a cada partição dos hds, assim quando monta vai aparecer o nome do rótulo, p.ex., backup1, backup2, etc. Acredito que com o Gparted seja possível renomear o rótulo sem ter que reformatar, basta que o hd esteja desmontado, mas conectado. Vinicius Outra opção para renomear os discos/partições é o gnome-disk-utility. Realmente muito prático. -- *FELIPE FALCE* Unix Systems Support Analyst GNU/Linux Specialist -- E-mail: fel...@linuxjf.org Blog: www.cowabunga.com.br Chat:[image: MSN:] fel...@linuxjf.org [image: Google Talk:] fel...@linuxjf.org [image: Skype:] lipefalce Find me on: [image: LinkedIn: http://br.linkedin.com/in/felipefalce]http://br.linkedin.com/in/felipefalce [image: Twitter: http://www.twitter.com/ffalce]http://www.twitter.com/ffalce [image: Blog RSS: http://www.cowabunga.com.br/?feed=rss2]http://www.cowabunga.com.br/?feed=rss2 [image: Flickr: http://www.flickr.com/photos/ffalce]http://www.flickr.com/photos/ffalce UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity. - Dennis Ritchie
Re[2]: iptables
Ola Rafael!
Estou usando VirtualBox versão 4.0.4r70112
Maquina virtual com Linux Squeeze ( que seria meu servidor )
Primeira adaptador está como bridge na eth0.
Configurado assim:
allow-hotplug eth0
iface eth0 inet dhcp
Segundo adapatador está como rede interna.
configurado assim:
auto eth1
iface eth1 inet static
address 192.168.1.254
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
Só tenho bind instalado neste servidor.
Para ativar o compartilhamento de internet rodo script abaixo.
- X ---
Maquina virtual Windows Xp ( que seria meus usuarios )
Adaptador rede interna.
configurei com ip 192.168.1.10
mascara 255.255.255.0
Gateway 192.168.1.254
DNS 192.168.1.254
Andei fazendo uns testes com as seguintes conclusões:
Antes de rodar o script não funciona internet no cliente ( windows XP )
Para mim testar conexão antes do script e depois do script
estava testando somente com o comando ping www.terra.com.br
Testei com o browse e o resultado foi o esperado...
ou seja apos o script com parametro start o browse funcionou.
apos o script com o parametro stop o Browse não funcionou.
porém o ping apos o script uma com start, funciona sempre independente
do parametro start ou stop.
Não sei o porque.
--
Diác. Moretti
twitter:@cjmoretti
\///
(o o)
__oo0 - () - 0oo___
Na certeza de nossa imortalidade, seguimos
nosso caminho fazendo o bem, desejando bem
e sendo a paixão única de nosso Deus.
___
Em 25/04/2011 às 00:00, Rafael Henrique da Silva Correia
rafaelhenr...@gmail.com escreveu:
Ops esqueci de perguntar uma coisa que me deixou curioso Diác. Moretti
que ambiente virtual você ta usando? E como estão configuradas as
interfaces das máquinas virtuais (host-only, NAT, Rede Interna ou Bridge
- me baseando nas confs do VirtualBox e VMWare Server) ??
Abraço
Em 21-04-2011 23:05, Rafael Henrique da Silva Correia escreveu:
Pessoal não sei se estou errado mas normalmente quando você tira a
regra de MASQUERADE da jogada o firewall/roteador não libera a
internet nem a pau. Experiência própria pois uma vez fiz um script pra
por em produção e por erro de digitação ao invés de digitar MASQUERADE
coloquei ACCEPT! (idiota eu não?)
Será que você não ta rodando outra coisa além desse script que deixa o
MASQUERADE da chain POSTROUTING da tabela NAT ativo?
Tenta arrancar a regra que da um jump para o alvo MASQUERADE e tenta
entrar na internet através da máquina client.
Abraço!
Em 20-04-2011 17:37, Eden Caldas escreveu:
Seguinte...
No seu script tem algumas regras de INPUT, e uma de NAT, porém quando
você lista as regras nao aparece nada.
Sugiro que você mude o script para uma forma mais simples, sem case.
Sugiro também que troque:
echo 1 /proc/sys/net/ipv4/conf/default/rp_filter
por
echo 1 /proc/sys/net/ipv4/ip_forward
Execute o script e depois novamente os comandos que te passei.
Eden Caldas
Consultor de TI
e...@linuxfacil.srv.br
(81) 9653 7220
LINUX FÁCIL – Consultoria e Serviços em TI
Em 20 de abril de 2011 10:29, Messias Manoel da Silva Junior
junior...@globo.com escreveu:
Cara, desabilita teu roteamento.
echo 1 /proc/sys/net/ipv4/ip_forward
Em 20 de abril de 2011 07:45, Diác. Morettim...@mitranh.org.br
escreveu:
Ola,
A resposta para o comando iptables -L -n -v é:
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
Chain FORWARD (policy ACCEPT 254 packets, 15240 bytes)
pkts bytes target prot opt in out source
destination
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
A resposta para o comando iptables -t nat -L -n -v é:
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
A resposta para o comando sysctl -a | grep ip_forward é:
net.ipv4.ip_forward = 1
echo 0 /proc/sys/net/ipv4/ip_forward
O meu script para o compartilhamento é:
#!/bin/bash
# ... Interface da internet
ifinternet=eth0
# ... Interface da rede local
iflocal=eth1
iniciar(){
modprobe iptable_nat
echo 1 /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o $ifinternet -j MASQUERADE
# iptables -A INPUT -p icmp --icmp-type echo-request -j DROP
echo 1 /proc/sys/net/ipv4/conf/default/rp_filter
iptables -A INPUT -m state --state INVALID -j DROP
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -i $iflocal -j ACCEPT
iptables -A INPUT -p tcp --dport 22 -j ACCEPT
Re: iptables
Cara o ping vai funcionar pois seu script (abaixo) quando você da um
stop nele ele não fecha o forwarding ... tenta fazer assim:
parar(){
echo 0 /proc/sys/net/ipv4/ip_forward
iptables -F
iptables -F -t nat
}
Veja se depois de executar o stop (parar) ele continua conseguindo
pingar o terra.
Até+
Em 25-04-2011 09:54, Diác. Moretti escreveu:
#!/bin/bash
# ... Interface da internet
ifinternet=eth0
# ... Interface da rede local
iflocal=eth1
iniciar(){
modprobe iptable_nat
echo 1 /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o $ifinternet -j MASQUERADE
# iptables -A INPUT -p icmp --icmp-type echo-request -j DROP
echo 1 /proc/sys/net/ipv4/conf/default/rp_filter
iptables -A INPUT -m state --state INVALID -j DROP
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -i $iflocal -j ACCEPT
iptables -A INPUT -p tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp --syn -j DROP
}
parar(){
iptables -F
iptables -F -t nat
}
case $1 in
start) iniciar;;
stop) parar;;
restart) parar; iniciar;;
*) echo Use os parametros start ou stop
esac
--
Rafael Henrique da Silva Correia
http://abraseucodigo.blogspot.com
Administrador de Sistemas Linux
Certificado pela LPIC - 101
ID: LPI000160699
--
To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4db577df.7010...@gmail.com
Re: iptables
Dica em off:
Tenta dropar a conexão de todas as chains da tabela filter (pelo
menos)... daí depois você libera conforme sua necessidade.. desta forma:
# iptables -P INPUT DROP
# iptables -P OUTPUT DROP
# iptables -P FORWARD DROP
Abraço!
Em 25-04-2011 10:32, Rafael Henrique da Silva Correia escreveu:
Cara o ping vai funcionar pois seu script (abaixo) quando você da um
stop nele ele não fecha o forwarding ... tenta fazer assim:
parar(){
echo 0 /proc/sys/net/ipv4/ip_forward
iptables -F
iptables -F -t nat
}
Veja se depois de executar o stop (parar) ele continua conseguindo
pingar o terra.
Até+
Em 25-04-2011 09:54, Diác. Moretti escreveu:
#!/bin/bash
# ... Interface da internet
ifinternet=eth0
# ... Interface da rede local
iflocal=eth1
iniciar(){
modprobe iptable_nat
echo 1 /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o $ifinternet -j MASQUERADE
# iptables -A INPUT -p icmp --icmp-type echo-request -j DROP
echo 1 /proc/sys/net/ipv4/conf/default/rp_filter
iptables -A INPUT -m state --state INVALID -j DROP
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -i $iflocal -j ACCEPT
iptables -A INPUT -p tcp --dport 22 -j ACCEPT
iptables -A INPUT -p tcp --syn -j DROP
}
parar(){
iptables -F
iptables -F -t nat
}
case $1 in
start) iniciar;;
stop) parar;;
restart) parar; iniciar;;
*) echo Use os parametros start ou stop
esac
--
Rafael Henrique da Silva Correia
http://abraseucodigo.blogspot.com
Administrador de Sistemas Linux
Certificado pela LPIC - 101
ID: LPI000160699
--
To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4db57865.5020...@gmail.com
Socializar Alegria e duvida de como Alterar visual do GDM
Bom Dia e Boa Páscoa Debianos! Sou Marcos Egito, a muito faço parte desta lista, ja fui muito ajudado por vocês, acompanho a todas as discussões. Bom quero compartilhar com todos minha felicidade, Trabalho em um centro de re-condicionamento de computadores e formação (Centro Marista Circuito Jovem do Recife), onde sou educador de Software Livre. A inicio o usávamos ubuntu (Eu sempre usei o Debian), hoje em nosso laboratório de informática estamos rodando o GNU/Linux Debian 6.0 Squeeze, em nossa unidade temos outras maquinas que o roda também, e os alunos acabam por levar para casa o nosso Debian, esta a alegria que queria socializar. Uma de minhas duvidas é como posso nesta nova versão estar alterando o visual do GDM, antes era fácil, baixamos o tema que queríamos para o GDM no arte.gnome.org, se não me engano, íamos no menu Sistema Preferências Tela de início de seção. Agora como posso mudar a tela de início de seção? Desde ja agradeço! Tenho outras dúvidas que como esta irei pesquizar primeiro caso não consiga respostas venho a lista! Abraços! -- Marcos Egito GNU/Linux User #491326 Fotos www.flickr.com/photos/maregito 081-8762 - 4378 celular OI, 081-3456 - 9739 casa mareg...@gmail.com Skype maregito, MSN mareg...@oi.com.br, Gtalk mareg...@gmail.com “somos um grande quebra-cabeças formado de pedacinhos de outras pessoas que nos completam. (eu mesmo!).
[COLABORAÇÃO] Configurando o Cliente do OpenVPN no Windows!
Galera, Gostaria de colaborar com o grupo com esse vídeo-tutorial: http://www.youtube.com/watch?v=PVBJsH0nC4w Desde já muito obrigado! Atenciosamente, Henrique Fagundes magnat...@yahoo.com.br Skype: magnata-br-rj Linux User: 475399 http://www.aprendendolinux.com/ http://youtube.com/aprendendolinux/ http://twitter.com/aprendendolinux/ __ Participe do Grupo Aprendendo Linux BR http://groups.google.com.br/group/aprendendo-linux-br/ Ou envie um e-mail para aprendendo-linux-br-subscr...@googlegroups.com -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db5ccee.6060...@yahoo.com.br
Lxde Squeeze
Olá pessoal, Instalei o Squeeze com Lxde e estou encontrando dois problemas: 1 - Mouse serial - achei o comando - inputattach --micorosoft /dev/ttyS0 mas não estou conseguindo por na configuração da sessão esse comando. 2 - o botão de desligar está desativado e não estou achando informação de como ativá-lo. Alguma idéia? Grato desde já, Marcos João -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303750713.9143.21.camel@livre
Re: Lxde Squeeze
Em 25 de abril de 2011 13:58, Marcos João dos Santos mar...@acheperto.com.br escreveu: Olá pessoal, Instalei o Squeeze com Lxde e estou encontrando dois problemas: 1 - Mouse serial - achei o comando - inputattach --micorosoft /dev/ttyS0 mas não estou conseguindo por na configuração da sessão esse comando. 2 - o botão de desligar está desativado e não estou achando informação de como ativá-lo. Pergunta : O serviço chamado ACPI está rodando ? Ele é o responsável pelo gerenciamento deste botão, se não estiver rodando digite : apt-get install acpid E depois edite o arquivo /etc/default/acpid e retire o comentário da linha all e então levante o serviço : /etc/init.d/acpid start e então teste o botão . Alguma idéia? Grato desde já, Marcos João Fábio Rabelo -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktimeefdrouyxcwziyw0n1psixfn...@mail.gmail.com
Chaves RSA ou DSA
Boa tarde, Gostaria de umas informações, li em varios site sobre chaves RSA e DSA, para uso com ssh, qual algoritimo de chave é mais recomendado, mais seguro, tem sites que dizem que DSA é mais seguro, e sites que RSA é mais seguro. Aguardo. Att. -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/877e06e2-40ac-4b0a-9ac5-31ca4005d...@x3g2000yqj.googlegroups.com
Re: Chaves RSA ou DSA
Em Segunda-feira 25 Abril 2011, às 17:59:29, villani escreveu: Boa tarde, Gostaria de umas informações, li em varios site sobre chaves RSA e DSA, para uso com ssh, qual algoritimo de chave é mais recomendado, mais seguro, tem sites que dizem que DSA é mais seguro, e sites que RSA é mais seguro. Aguardo. Att. Depende apenas da época que os artigos que você leu foram escritos. A mais de 2.000 anos atrás, o ROT13 era o suprassumo em segurança, no exercito de César. Criptografia militar mesmo. Hoje em dia Abraços Tux P.S. Da proxima, cite os sites em que você encontrou as contradições. sobre quem é melhor do que quem. Enriquece a discussão. -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201104251823.07703.tux_lit...@yahoo.com
Re: Lxde Squeeze
Já tive problemas com o botão de desligar antes e no caso era apenas uma questão de permissão do usuário, que não estava no grupo (não lembro o nome de cabeça) que tem autorização para desligar o sistema. André Nunes Batista Blog: http://tagesuhu.wordpress.com/ PGP Public Key: 0x7b0590cb6722cf80 2011/4/25 Fábio Rabelo fa...@fabiorabelo.wiki.br Em 25 de abril de 2011 13:58, Marcos João dos Santos mar...@acheperto.com.br escreveu: Olá pessoal, Instalei o Squeeze com Lxde e estou encontrando dois problemas: 1 - Mouse serial - achei o comando - inputattach --micorosoft /dev/ttyS0 mas não estou conseguindo por na configuração da sessão esse comando. 2 - o botão de desligar está desativado e não estou achando informação de como ativá-lo. Pergunta : O serviço chamado ACPI está rodando ? Ele é o responsável pelo gerenciamento deste botão, se não estiver rodando digite : apt-get install acpid E depois edite o arquivo /etc/default/acpid e retire o comentário da linha all e então levante o serviço : /etc/init.d/acpid start e então teste o botão . Alguma idéia? Grato desde já, Marcos João Fábio Rabelo -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktimeefdrouyxcwziyw0n1psixfn...@mail.gmail.com
wireless cai frequentemente
Caros, Após um boot minha conexão wireless (doméstica) cai com muita frequência (1 ou 2 vezes por minuto), durante vários minutos. Após algum tempo (15 ou 30 minutos, talvez) ela finalmente se estabiliza e raramente volta a cair, permanecendo estável por dias, até. Ela reconecta automaticamente, mas demora algum tempo e às vezes pede novamente a identificação (password). Isso parece ocorrer mais frequentemente após um suspend ou hibernate, mas não estou absolutamente certo quanto a isso. Minha rede wireless está configurada como WPA, Cipher type TKIP/PSK. Um lspci mostra: 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Subsystem: Intel Corporation Device 1041 Flags: bus master, fast devsel, latency 0, IRQ 30 Memory at f030 (32-bit, non-prefetchable) [size=4K] Capabilities: access denied Kernel driver in use: iwl3945 O mesmo ocorre na minha universidade, que usa um esquema de mais complicado de autenticação/criptografia (wpa2 enterprise/Tunneled TLS/PAP). Porém, não acontece na minha outra casa (que também usa o mesmo wpa personal mencionado acima). Em resumo, o comportamento depende da rede wireless. Mas acontecia tanto no Lenny quanto no Squeeze. Estou usando um laptop Toshiba Satellite A300 com Debian Squeeze. Quem tiver sugestões, seja bem vindo. Saudações. G.Paulo. -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110426020255.73e09718@appia
Re: wireless cai frequentemente
Tenho um problema semelhante, algumas redes (com ou sem criptografia) conectavam e outras não. Resolvi desabilitando o gerenciamento de energia para a placa (porém a minha é uma Broadcom) a cada boot. Talvez ajude no seu caso: *iwconfig wlan0 power off* Espero ter ajudado; On 04/25/2011 09:02 PM, linuser wrote: Caros, Após um boot minha conexão wireless (doméstica) cai com muita frequência (1 ou 2 vezes por minuto), durante vários minutos. Após algum tempo (15 ou 30 minutos, talvez) ela finalmente se estabiliza e raramente volta a cair, permanecendo estável por dias, até. Ela reconecta automaticamente, mas demora algum tempo e às vezes pede novamente a identificação (password). Isso parece ocorrer mais frequentemente após um suspend ou hibernate, mas não estou absolutamente certo quanto a isso. Minha rede wireless está configurada como WPA, Cipher type TKIP/PSK. Um lspci mostra: 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Subsystem: Intel Corporation Device 1041 Flags: bus master, fast devsel, latency 0, IRQ 30 Memory at f030 (32-bit, non-prefetchable) [size=4K] Capabilities:access denied Kernel driver in use: iwl3945 O mesmo ocorre na minha universidade, que usa um esquema de mais complicado de autenticação/criptografia (wpa2 enterprise/Tunneled TLS/PAP). Porém, não acontece na minha outra casa (que também usa o mesmo wpa personal mencionado acima). Em resumo, o comportamento depende da rede wireless. Mas acontecia tanto no Lenny quanto no Squeeze. Estou usando um laptop Toshiba Satellite A300 com Debian Squeeze. Quem tiver sugestões, seja bem vindo. Saudações. G.Paulo.
güncelleme sırasında hata alıyorum
merhaba arkadaşlar güncelleme sırasında hata alıyorum. synaptic'te de konsolda da aynı şekişde yine hata iletisi var. ancak sudo aptitude update yapınca hata yok. sudo apt-get update ile güncelleme yapınca çıkan sonuç şöyle: Hit http://ftp.tr.debian.org squeeze Release.gpg Ign http://ftp.tr.debian.org/debian/ squeeze/contrib Translation-en Ign http://ftp.tr.debian.org/debian/ squeeze/contrib Translation-tr Ign http://ftp.tr.debian.org/debian/ squeeze/main Translation-en Ign http://ftp.tr.debian.org/debian/ squeeze/main Translation-tr Ign http://ftp.tr.debian.org/debian/ squeeze/non-free Translation-en Hit http://security.debian.org squeeze/updates Release.gpg Ign http://security.debian.org/ squeeze/updates/contrib Translation-en Ign http://security.debian.org/ squeeze/updates/contrib Translation-tr Ign http://ftp.tr.debian.org/debian/ squeeze/non-free Translation-tr Ign http://security.debian.org/ squeeze/updates/main Translation-en Ign http://security.debian.org/ squeeze/updates/main Translation-tr Ign http://security.debian.org/ squeeze/updates/non-free Translation-en Ign http://security.debian.org/ squeeze/updates/non-free Translation-tr Hit http://security.debian.org squeeze/updates Release Hit http://ftp.tr.debian.org squeeze Release Hit http://security.debian.org squeeze/updates/contrib Sources Get:1 http://http.us.debian.org squeeze Release.gpg [1.671 B] Hit http://ftp.tr.debian.org squeeze/main Sources Ign http://http.us.debian.org/debian/ squeeze/contrib Translation-en Ign http://http.us.debian.org/debian/ squeeze/contrib Translation-tr Ign http://http.us.debian.org/debian/ squeeze/main Translation-en Ign http://http.us.debian.org/debian/ squeeze/main Translation-tr Ign http://http.us.debian.org/debian/ squeeze/non-free Translation-en Ign http://http.us.debian.org/debian/ squeeze/non-free Translation-tr Hit http://ftp.tr.debian.org squeeze/contrib Sources Hit http://security.debian.org squeeze/updates/non-free Sources Hit http://ftp.tr.debian.org squeeze/non-free Sources Hit http://ftp.tr.debian.org squeeze/main i386 Packages Hit http://ftp.tr.debian.org squeeze/contrib i386 Packages Get:2 http://security.debian.org squeeze/updates/main Sources [26,4 kB] Get:3 http://security.debian.org squeeze/updates/main i386 Packages [75,0 kB] Hit http://security.debian.org squeeze/updates/contrib i386 Packages Hit http://security.debian.org squeeze/updates/non-free i386 Packages Hit http://ftp.tr.debian.org squeeze/non-free i386 Packages Hit http://http.us.debian.org squeeze Release Hit http://http.us.debian.org squeeze/contrib i386 Packages Hit http://http.us.debian.org squeeze/non-free i386 Packages Hit http://http.us.debian.org squeeze/main i386 Packages Fetched 1.673 B in 2s (777 B/s) W: Failed to fetch http://security.debian.org/dists/squeeze/updates/main/source/Sources.bz2 Hash Sum mismatch W: Failed to fetch http://security.debian.org/dists/squeeze/updates/main/binary-i386/Packages.bz2 Hash Sum mismatch E: Some index files failed to download, they have been ignored, or old ones used instead. sources.list içeriğim şu şekilde... # Line commented out by installer because it failed to verify: deb http://security.debian.org/ squeeze/updates main deb-src http://security.debian.org/ squeeze/updates contrib non-free main #Added by software-properties # Line commented out by installer because it failed to verify: deb http://http.us.debian.org/debian/ squeeze contrib non-free main deb http://ftp.tr.debian.org/debian/ squeeze main contrib non-free deb-src http://ftp.tr.debian.org/debian/ squeeze main contrib non-free #Added by software-properties deb http://security.debian.org/ squeeze/updates main contrib non-free önceden böyle bir sorunla karşılaşmadım. sistemde son zamanlarda öyle önemli bir değişiklik yaptığımı da sanmıyorum. Neden şimdi böyle bir hata aldığımı bir türlü çözemedim. yardımlarınız için şimdiden teşekkürler. -- To UNSUBSCRIBE, email to debian-user-turkish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303729640.4933.15.camel@debian
RE: Wireless kurulum desteği
malesef bu wifi işi beni zorladı mehmetak:/home/mehmet# apt-get install firmware-iwlwifiReading package lists... DoneBuilding dependency tree Reading state information... Donefirmware-iwlwifi is already the newest version.0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.mehmetak:/home/mehmet# Date: Fri, 22 Apr 2011 10:56:04 +0300 From: rama...@evdoxia.net To: ak.meh...@windowslive.com CC: debian-user-turkish@lists.debian.org Subject: Re: Wireless kurulum desteği Merhaba yeniden, Özellikle firmware-iwlwifi paketinin yüklü olduğuna emin misiniz acaba? Gözünüzden kaçmış olabilir çünkü şu aşağıdaki adrese bakarsanız aynı hatayı bu paketi kurmadığı için almışlar. http://doctus.org/showthread.php?t=50676 firmware-iwlwifi paketini yüklemek için squeeze main contrib non-free depolarının da aktif olması gerekiyor. Yani /etc/apt/sources.list dosyası içerisinde deb http://ftp.de.debian.org/debian/ squeeze main contrib non-free deb-src http://ftp.de.debian.org/debian/ squeeze main contrib non-free depolarıda görünmeli (başında # işareti varsa kaldırın). Sonra sudo yüklenmişse; sudo apt-get update sudo apt-get install firmware-iwlwifi Sudo kullanmıyorsanız da: su apt-get update apt-get install firmware-iwlwifi dediğinizde aynı yolla ya da belki fazladan bir şey yapmanıza gerek kalmadan wireless'ınızı kullanabilmeniz lazım. 21-04-2011 16:20, Mehmet AK yazmış: Selam . aşağıda en son sonuçlar mevcut mehmetak:/home/mehmet# modprobe iwlagn mehmetak:/home/mehmet# iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. vboxnet0 no wireless extensions. mehmetak:/home/mehmet# ifconfig wlan0 up SIOCSIFFLAGS: Böyle bir dosya ya da dizin yok Date: Wed, 20 Apr 2011 23:18:57 +0300 From: rama...@evdoxia.net To: debian-user-turkish@lists.debian.org CC: ak.meh...@windowslive.com Subject: Re: virtualBox kurulum hakkında yardım isteği Merhaba, Intel marka bir wireless kartınız varsa ışık yansada sürücüleri yüklemeden çalışmayacaktır. Bunun için öncelikle: apt-get install firmware-iwlwifi wireless-tools ile iwlang yüklemesi yapmanız lazım. Gerekli kernel modülü yüklenecektir ama eğer aktifleşmiyorsa: modprobe iwlagn ile çalıştırabilirsiniz. Daha sonra, iwconfig ile de çalışıp çalışmadığını görebilirsiniz. Sürücü bilgileri görünmeli bu komut ile. Diyelim ki bu çıktıda wlan0 altında bilgiler görüyorsunuz. Bu durumda da, ifconfig wlan0 up dediğinizde wireless kartınızın artık çalışıyor olması gerek. 20-04-2011 18:40, Mehmet AK yazmış: Selam . lenny den Squeze upgrade yapmıştım ve Grub açılışına liste olarak en başta eski sürüm geliyormuş dikkat etmemiştim. Upgrade edilen çekirdek üzerinden açılınca virtualbox kullanmaya başladım. Yılın Acemi Debian cısı olarak ilan ediyorum kendimi bir arkadaşın lenova notebook üzerine debian kurdum. wireless ayarları için gerekli olan programları yükledim donanımsal olarak wireless ışığı açık olmasına rağmen yazılımda offline görünüyor. yardımlarınız için şimdiden teşekkür ederim Allah işlerinizde kolaylıklar versin İyi çalışmalar Date: Sat, 16 Apr 2011 15:30:19 +0300 From: goksin.akde...@gmail.com To: debian-user-turkish@lists.debian.org Subject: Re: virtualBox kurulum hakkında yardım isteği 16/04/2011 13:06, Mehmet AK yazmış: kernel headers paketini kurmak istediğimde şöyle bir hata mesajı alıyorum malesef :( mehmetak:/home/mehmet# apt-get install linux-headers-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-headers-2.6.32-bpo.5-amd64 E: Couldn't find any package by regex 'linux-headers-2.6.32-bpo.5-amd64' mehmetak:/home/mehmet# ; bpo gördüğümde aklıma backports.org geliyor. Aratınca Debian eski kararlı sürümü olan lenny için hazırlınamış olan backports paketleri geldi. Arkadaş Lenny ve resmi depolar yanında backports.org deposunu kullanıyor sanırım. Lenny kullanmak yerine Squeeze karalı sürümüne terfi edip depodan güncel bir Virtualbox sürümü kurabilirsiniz. işiniz daha kolay olur. -- Gökşin Akdeniz (Gökşin Akdeniz) goksin.akde...@gmail.com Anahtar parmakizi = FE10 8C14 A144 4FDE BE18 D5E3 E758 F49A 8A5D F8AE [Son kullanma tarihi: 2011-06-08] -- To UNSUBSCRIBE, email to debian-user-turkish-requ...@lists.debian.org with a subject of
Re: Monitors requiring interlaced video modes with older Nvidia video cards are out of options in wheezy
On 2011-04-24 15:19:05 Stephen Powell wrote: Don't file bugs upstream If you file a bug in Debian, don't send a copy to the upstream software maintainers yourself, as it is possible that the bug exists only in Debian. If necessary, the maintainer of the package will forward the bug upstream. But if the bug is clearly in upstream code, and the maintainer is ignoring the bug report, what else can one do? Take action and help the maintainer out. Most maintainers love it when someone else does work for them. If you know it's an upstream bug, file it there and mark the bug as forwarded. -- Boyd Stephen Smith Jr. ,= ,-_-. =. b...@iguanasuicide.net ((_/)o o(\_)) ICQ: 514984 YM/AIM: DaTwinkDaddy `-'(. .)`-' http://iguanasuicide.net/\_/ signature.asc Description: This is a digitally signed message part.
weather program not working anymore
Using Debian Squeeze. In my .weatherrc, I have the following stanza [home] City = Newark Forecast = True ID = KEWR St = NJ However, if I do $weather home weather: error: failed to retrieve http://weather.noaa.gov/pub/data/forecasts/city/nj/newark.txt HTTPError: HTTP Error 404: Not Found It used to work before. But the website seems to be broken now. Does anyone know of a fix? $dpkg -l weather-util ii weather-util1.5-1 command-line tool to obtain weather conditions and forecasts thanks -- Kamaraju S Kusumanchi http://malayamaarutham.blogspot.com/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ip33jo$p7s$1...@dough.gmane.org
Re: list all the devices connected to the router
On Sun, Apr 24, 2011 at 7:47 PM, Kamaraju S Kusumanchi raju.mailingli...@gmail.com wrote: shawn wilson wrote: sense no one has mentioned it yet - nmap -sP 192.168.1.* Thanks for the nmap command. This lists some of the machines but not all. For example, when I look at 192.168.1.1 in a web browser I see that the router is connected to 192.168.1.36 . However, it does not show up in the nmap output. $nmap -sP 192.168.1.* Starting Nmap 5.00 ( http://nmap.org ) at 2011-04-24 19:44 EDT Host dslrouter.westell.com (192.168.1.1) is up (0.0011s latency). Host D76PB4B1.westell.com (192.168.1.21) is up (0.00049s latency). Nmap done: 256 IP addresses (2 hosts up) scanned in 2.45 seconds The 192.168.1.36 is my vonage phone connection. I am unable to ping it either. However, my phone works so the connection must be alive. if you can't ping it, i doubt anything other than snmp or cacti (or whatever network monitoring tool might suite your preference) will help you much. chances are that the phone does what my tv (and mac mini on default configuration) does - goes to sleep until it needs to do something. Any other ideas? yeah, rtfm: -sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans -sU: UDP Scan -sN/sF/sX: TCP Null, FIN, and Xmas scans other than that, nmap.org and insecure.org have tons of docs. you can probably even find someone asking about scanning your phone. there is also a talk that the lead dev did about 'scanning the internet' you can probably google for (or is probably linked to on their page) that was given at defcon a few years ago. you can also fire up wireshark and see what your phone is doing and figure out how to handle it from that point. if it wakes up when you get a call, you can probably write some simple lua plugin to find it (i don't think it's that hard though). if you get stuck, check #nmap on the freenode irc. it's not very active but pretty helpful folks stay in there. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTikQ_cu1Zdfc+17WoOdyh=lybf4...@mail.gmail.com
Re: file systems
On 04/19/2011 05:42 PM, Stan Hoeppner wrote: [snip] XFS beats EXT4 hands down in nearly every category, Including not being able to xfs_check very large filesystems on 32 bit machines. (Which if why I'm going back to ext4.) -- Neither the wisest constitution nor the wisest laws will secure the liberty and happiness of a people whose manners are universally corrupt. Samuel Adams, essay in The Public Advertiser, 1749 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db513e5.5030...@cox.net
installer preseeding - partitioning
Hi all,
I've got a preseed file, with a partitioning recipe that I think is
valid, but I'm having trouble getting past the partitioner with no
interaction. Unfortunately the documentation is a bit lacking on how the
various partman values interact.
This is the partitioning section of my preseed.cfg so far:
## Partitioning ##
d-i partman-auto/disk string /dev/sda
# d-i partman-auto/method string my-recipe
# d-i partman-auto/choose_recipe select my-recipe
d-i partman-auto/expert_recipe string my-recipe :: \
10240 10240 -1 ext4 \
$primary{ } \
$bootable{ } \
method{ format } \
format{ } \
use_filesystem{ } \
filesystem{ ext4 } \
mountpoint{ / } . \
\
2048 2048 2560 linux-swap \
$primary{ } \
method{ swap } \
format{ } .
d-i partman/confirm_write_new_label boolean true
d-i partman/choose_partition \
select Finish partitioning and write changes to disk
d-i partman/confirm boolean true
I'm testing this with lenny/amd64 at the moment, as squeeze seems unable
to detect the qemu hard drive in my kvm environment (and lucid gets
frowned upon here - but has more or less the same issues :-)
Any hints on what I need to set to make this go through without asking
me any questions?
Thanks,
Richard
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/1303712855.12281.15.ca...@topaz.wgtn.cat-it.co.nz
Re: installer preseeding - partitioning
On Mon, 2011-04-25 at 18:27 +1200, Richard Hector wrote:
Hi all,
I've got a preseed file, with a partitioning recipe that I think is
valid, but I'm having trouble getting past the partitioner with no
interaction. Unfortunately the documentation is a bit lacking on how the
various partman values interact.
This is the partitioning section of my preseed.cfg so far:
## Partitioning ##
d-i partman-auto/disk string /dev/sda
# d-i partman-auto/method string my-recipe
# d-i partman-auto/choose_recipe select my-recipe
d-i partman-auto/expert_recipe string my-recipe :: \
10240 10240 -1 ext4 \
$primary{ } \
$bootable{ } \
method{ format } \
format{ } \
use_filesystem{ } \
filesystem{ ext4 } \
mountpoint{ / } . \
\
2048 2048 2560 linux-swap \
$primary{ } \
method{ swap } \
format{ } .
d-i partman/confirm_write_new_label boolean true
d-i partman/choose_partition \
select Finish partitioning and write changes to disk
d-i partman/confirm boolean true
I'm testing this with lenny/amd64 at the moment, as squeeze seems unable
to detect the qemu hard drive in my kvm environment (and lucid gets
frowned upon here - but has more or less the same issues :-)
Actually, I think I was wrong on 2 counts:
* lucid and lenny behave differently (lucid offers to resize my
partitions; also lucid detects /dev/sda while lenny detects /dev/hda).
* both seem to ignore my recipe completely.
Any tips?
Thanks,
Richard
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/1303714298.12281.18.ca...@topaz.wgtn.cat-it.co.nz
Re: weather program not working anymore
On 25/04/11 07:16, Kamaraju S Kusumanchi wrote: Using Debian Squeeze. In my .weatherrc, I have the following stanza [home] City = Newark Forecast = True ID = KEWR St = NJ However, if I do $weather home weather: error: failed to retrieve http://weather.noaa.gov/pub/data/forecasts/city/nj/newark.txt HTTPError: HTTP Error 404: Not Found It used to work before. But the website seems to be broken now. Does anyone know of a fix? I just had a look at the Weather homepage: http://fungi.yuggoth.org/weather/ and it looks like the format of the request and data has changed. There is a partial fix on that page, and a new version of Weather is being worked on. No idea when that might filter into Debian, if it makes it into Squeeze at all. Looks like you have to specify location by state zone number, rather than city. Hope that helps a bit. -- Dom -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db5266e.4010...@rpdom.net
Re: Backlight mystery - anyone shed light? some progress
On 24 Apr 2011, shawn wilson wrote: On Sun, Apr 24, 2011 at 5:10 PM, Anthony Campbell a...@acampbell.org.uk wrote: On 24 Apr 2011, Anthony Campbell wrote: On 24 Apr 2011, Camaleón wrote: Well, it's beginning to look as if it was a hardware problem all along. The Windows partition disappeared and the backlight began to work perfectly. I decided to do a reinstall in the former Windows partition. Everything seemed to go off correctly but when I came to reboot into Debian I got Nonsystem Disk or disk failure: Replace and strike any key when ready. I think there must have been some hardware failure. that's your mbr talking to you. don't think that's hardware 'failure'. Yes -thanks to another kind soul on this always-helpful list, I needed to set the partition with the bootable flag. It then came up at once. It's beginning to look as if the original problem discussed in this thread (dim backlight) was due to the egregious Windows. Now that that is gone the backlight is bright all the time. Much relief. Anthony -- Anthony Campbell - a...@acampbell.org.uk Microsoft-free zone - Using Debian GNU/Linux http://www.acampbell.org.uk - sample my ebooks at http://www.smashwords.com/profile/view/acampbell -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425080117.gf2...@acampbell.org.uk
Re: Issue writing image to disk via dd
Dne, 25. 04. 2011 05:02:40 je Huang, Tao napisal(a): Yes. Debian is installed and running on sda and I am trying to overwrite the current installation with this disk image. to my understanding, writing with dd on a mounted device leads to unpredictable results, and never guarantees to work. and i think your problem was not caused by differences in dd builds, it was different behaviours of the systems on a modified mounted root partition. It would seem we're finally getting somewhere. This should be fairly easy to test, namely: performing dd on an *unmounted* (not live) system and seeing if it finally works. -- Cheerio, Klistvud http://bufferoverflow.tiddlyspot.com Certifiable Loonix User #481801 Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303718998.14909.0@compax
Re: Laptop won't boot after installation - disk error
On 24 Apr 2011, Allan Wind wrote: On 2011-04-24 22:18:02, Anthony Campbell wrote: I just did a fresh installation of Debian. Everything seemed to go off correctly but when I came to reboot I got: Non-system disk or disk error: replace and strike any key when ready. I reinstalled twice and also reinstalled grub twice. No errors reported. I suspect a hard disk failure or cmos problem. Any other ideas? Is it possible to boot via a cdrom? All the files are there on the hard disk when I look at it via rescue. I recently upgraded my laptop and the new laptop required the boot flag set. You can do that via fdisk (or friends) when booting into rescue or go through the install and set it there but accept the option of keeping the data. Then just restart after the new partition table is written out. /Allan -- Allan Wind Life Integrity, LLC http://lifeintegrity.com Yes!! Thank you indeed for that tip. With the bootable flag set it came up at once. I don't know why, I had thought it wasn't needed, but evidently it is. Anthony -- Anthony Campbell - a...@acampbell.org.uk Microsoft-free zone - Using Debian GNU/Linux http://www.acampbell.org.uk - sample my ebooks at http://www.smashwords.com/profile/view/acampbell -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425080735.gg2...@acampbell.org.uk
Re: list all the devices connected to the router
Dne, 25. 04. 2011 01:47:01 je Kamaraju S Kusumanchi napisal(a): Any other ideas? thanks Well, here's the one-liner I use (a crontab entry actually): for ip in $(seq 1 254); do ping -c 1 192.168.1.$ip/dev/null; [ $? -eq 0 ] echo 192.168.1.$ip || : ; done Found it on the Internet a while ago. Hope it works on your system too. -- Cheerio, Klistvud http://bufferoverflow.tiddlyspot.com Certifiable Loonix User #481801 Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303719511.14909.1@compax
Re: Libtrash: Have any of you successfully activated it?
Dne, 25. 04. 2011 05:46:18 je Jason Hsu napisal(a): I've been able to get libtrash to PARTIALLY work. It only works on non-empty files and ONLY files deleted through the GUI. Libtrash does NOT work for files deleted through the rm command. What do I need to do to get for libtrash to work for files deleted through the rm command? If this isn't possible, is there another package I can install to fill the gap? http://penguinpetes.com/b2evo/index.php?title=why_can_t_we_throw_away_desktop_trashcanmore=1c=1tb=1pb=1 It won't exactly fill the gap, but is a funny read nonetheless. Perhaps btrfs, with its roll-back capability, is what you're after. For the occasional undelete now and then, it's bound to be better than any userland trashcan implementation. -- Cheerio, Klistvud http://bufferoverflow.tiddlyspot.com Certifiable Loonix User #481801 Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303721407.14909.2@compax
Re: Issue writing image to disk via dd
On Mon, Apr 25, 2011, at 11:02:40 +0800, Huang, Tao wrote: to my understanding, writing with dd on a mounted device leads to unpredictable results, and never guarantees to work. I understand what you mean but it does work 100% of the time on the versions I mentioned including Lenny, just not Etch where I was wanting it to or even the current Squeeze release. and i think your problem was not caused by differences in dd builds, it was different behaviours of the systems on a modified mounted root partition. That makes sense. Thanks again for your input, -Mark -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425034904.583dd...@mkproductions.org
Re: Monitors requiring interlaced video modes with older Nvidia video cards are out of options in wheezy
On Du, 24 apr 11, 16:19:05, Stephen Powell wrote: But that brings up another issue, which is reporting bugs upstream. The official Debian policy is Don't report bugs upstream. I quote from http://www.debian.org/Bugs/Reporting: Don't file bugs upstream If you file a bug in Debian, don't send a copy to the upstream software maintainers yourself, as it is possible that the bug exists only in Debian. If necessary, the maintainer of the package will forward the bug upstream. But if the bug is clearly in upstream code, and the maintainer is ignoring the bug report, what else can one do? I dare say you in particulara are not the intended audience for that documentation. As far as I can tell you are more than qualified to judge if the bug is upstream or not, just don't forget to 'forward' the Debian bug and tag 'upstream'. Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Re: Issue writing image to disk via dd
On Mon, Apr 25, 2011, at 10:09:58 +0200, Klistvud wrote: It would seem we're finally getting somewhere. This should be fairly easy to test, namely: performing dd on an *unmounted* (not live) system and seeing if it finally works. Yes, I tried this yesterday. Using dd to write the image to sdb which was an unmounted/empty disk worked properly. So the problem only happens when overwriting the live system in either Etch or Squeeze. Lenny works exactly as expected so I guess I could try upgrading the remote server from Etch to Lenny and then do it, but it still seems odd that it would not work in Etch, work in Lenny, and then not work again in Squeeze. Thanks, -Mark -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425035452.31c36...@mkproductions.org
Re: weather program not working anymore
On Lu, 25 apr 11, 08:44:46, Dom wrote: I just had a look at the Weather homepage: http://fungi.yuggoth.org/weather/ and it looks like the format of the request and data has changed. There is a partial fix on that page, and a new version of Weather is being worked on. No idea when that might filter into Debian, if it makes it into Squeeze at all. Seems to qualify for squeeze-updates, if the code changes are not too intrusive. Of course, someone has to package the new version first ;) Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
which module I should choose during compile kernel
Hi, the # lspci 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Universal Host Controller #5 (rev 05) 00:1a.7 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Universal Host Controller #1 (rev 05) 00:1d.7 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] 01:00.1 Audio device: ATI Technologies Inc Device aa90 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe (rev 10) 02:00.1 SD Host controller: Broadcom Corporation Device 16bc (rev 10) 03:00.0 Network controller: Broadcom Corporation Device 4331 (rev 02) 04:00.0 FireWire (IEEE 1394): Agere Systems FW643 PCI Express1394b Controller (PHY/Link) (rev 08) I don't know how to compile the linux-source-2.6.38.tar.bz2 to make it support graphic driver and the network. possible inclusive the wireless. Here thanks for any suggestions. Best regards, lina
Re: file systems
Also barriers should be enabled for data safety. Barriers are enabled for ext4 by default. By the way, detailed mount options should always be considered when comparing file systems. See this discussion: Large HDD/SSD Linux 2.6.38 File-System Comparison http://phoronix.com/forums/showthread.php?36507-Large-HDD-SSD-Linux-2.6.38-File-System-Comparison/page6 -- Best regards, Jörg-Volker. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ip3did$4ut$1...@dough.gmane.org
Re: Issue writing image to disk via dd
Dne, 25. 04. 2011 10:54:52 je Mark Kane napisal(a): On Mon, Apr 25, 2011, at 10:09:58 +0200, Klistvud wrote: It would seem we're finally getting somewhere. This should be fairly easy to test, namely: performing dd on an *unmounted* (not live) system and seeing if it finally works. Yes, I tried this yesterday. Using dd to write the image to sdb which was an unmounted/empty disk worked properly. So the problem only happens when overwriting the live system in either Etch or Squeeze. Lenny works exactly as expected so I guess I could try upgrading the remote server from Etch to Lenny and then do it, but it still seems odd that it would not work in Etch, work in Lenny, and then not work again in Squeeze. Thanks, -Mark Hmm, perhaps your live system is performing some disk writes *while* your dd is doing its thing, thus effectively overwriting (corrupting) some sectors already written by dd? -- Cheerio, Klistvud http://bufferoverflow.tiddlyspot.com Certifiable Loonix User #481801 Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303725881.14909.3@compax
Re: file systems
Dne, 25. 04. 2011 11:06:45 je Jörg-Volker Peetz napisal(a): Also barriers should be enabled for data safety. Barriers are enabled for ext4 by default. By the way, detailed mount options should always be considered when comparing file systems. See this discussion: Large HDD/SSD Linux 2.6.38 File-System Comparison http://phoronix.com/forums/showthread.php?36507-Large-HDD-SSD-Linux-2.6.38-File-System-Comparison/page6 -- Best regards, Jörg-Volker. Incidentally: is there a good discussion/howto about configuring ext4 for increased data safety (as opposed to greater access speed)? There's plethora of info for ext3 out there, not so much for ext4 though. -- Cheerio, Klistvud http://bufferoverflow.tiddlyspot.com Certifiable Loonix User #481801 Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303726118.14909.4@compax
Re: Using Files Without Mounting A Share From Another System
On 2011-04-25, Hal Vaughan h...@halblog.com wrote: --- SNIP --- A couple points here. I checked the source code for the Dynamic Tree Demo that is used as a JNLP demo. Now I will admit I haven't been using Java for a couple years and have some catching up to do (I think I was using Java 5, but know I've totally missed Java 6), but when I went over the source code for that demo, there was no main() method in the source. Or, more correctly, there was, but it was commented out. That, right there, is an indication that if you're writing an app in Java to be launched normally, there will be different preparations than if you're using JNLP. (I haven't used JNLP yet, but I did write some applets and even set up a couple Java apps to be both apps and applets.) I can only think that the main() method was commented out later on. A Java application deployed using JNLP has its entry point in the main method, just like any other Java application. See the third bullet point in the development tutorial[1]. I even looked at their more in depth tutorial on deploying a JNLP project, but didn't find any way to launch one, other than through a browser. (Which I don't want to do -- then I have to figure out the default browser from within a Java class on Windows, Linux, and OS X and launch it.) You don't need to do that. You simply need the relevant file association on the client. On a Debian system you have: $ grep jnlp /usr/share/applications/mimeinfo.cache application/x-java-jnlp-file=sun-java6-javaws.desktop When the .jnlp file is accessed over HTTP using a web browser, the browser passes the file to the local javaws executable. Here the browser is simply arranging the transport. Equally, the user could access the .jnlp file using Windows Explorer or Nautilus, etc. You can even go directly to the file from the command line: javaws http://download.oracle.com/docs/cd/E17746_01/tutorialJWS/deployment/webstart/ex6/webstart_ComponentArch_DynamicTreeDemo/dynamictree-webstart.jnlp (There is an understandable but unfortunate tendency to confuse Java Web Start with applet technology. An applet runs in isolation within a web browser (at least we hope it does). In the case of JWS, once the resources are delivered to the client then the browser or file manager is out of the picture.) You need some sort of xml file defining the app to launch and while java does not (want to) understand the smb:// protocol we are stuck. I can indeed play JNLP based java applications that are hosted online but I cannot run the java application I want to run while is on samba share. At least not directly ;-( Try using a UNC path in the JNLP descriptor, e.g., file:server/share/app.jar. Windows clients will understand that. This works on Windows, with SMB, but that brings us back to the original point: Accessing a file on a network share without mounting the share. On Windows, since SMB is built in, you can easily do that. On Linux, you can't. You can use smbclient and copy the file over to your system if it's on an SMB share, but nobody yet has provided a way to access a file on a network share from Linux without either mounting the share or copying the file over to the local computer first. Yes, that is a problem. I'm looking at Java RMI, but that involves certificates and so on and I'm still not sure if I will easily be able to put that much on a client system that is trying to run the program. And you would still have the problem of deploying Java software to each client machine. Are you in a position to put a web server on the machine which offers the network share? That would allow you to serve up a .jnlp file and its associated JAR file in a simple, standard and platform-neutral way. I'll stop evangelising now :-) [1] http://download.oracle.com/javase/tutorial/deployment/webstart/developing.html -- Liam O'Toole Cork, Ireland -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/slrniraidm.enl.liam.p.otoole@dipsy.tubbynet
Re: installer preseeding - partitioning
On Mon, Apr 25, 2011 at 4:51 PM, Richard Hector rich...@walnut.gen.nzwrote:
On Mon, 2011-04-25 at 18:27 +1200, Richard Hector wrote:
Hi all,
I've got a preseed file, with a partitioning recipe that I think is
valid, but I'm having trouble getting past the partitioner with no
interaction. Unfortunately the documentation is a bit lacking on how the
various partman values interact.
This is the partitioning section of my preseed.cfg so far:
## Partitioning ##
d-i partman-auto/disk string /dev/sda
# d-i partman-auto/method string my-recipe
# d-i partman-auto/choose_recipe select my-recipe
d-i partman-auto/expert_recipe string my-recipe :: \
10240 10240 -1 ext4 \
$primary{ } \
$bootable{ } \
method{ format } \
format{ } \
use_filesystem{ } \
filesystem{ ext4 } \
mountpoint{ / } . \
\
2048 2048 2560 linux-swap \
$primary{ } \
method{ swap } \
format{ } .
d-i partman/confirm_write_new_label boolean true
d-i partman/choose_partition \
select Finish partitioning and write changes to disk
d-i partman/confirm boolean true
This is my preseed (from Lucid):
d-i partman-auto/disk string /dev/sda
d-i partman-auto/method string regular
d-i partman-auto/expert_recipe string physics-workstation :: \
200 2 250 ext4 \
$primary{ } \
$bootable{ } \
method{ format } \
format{ } \
use_filesystem{ } \
filesystem{ ext4 } \
mountpoint{ /boot } . \
25000 2 29000 ext4 \
method{ format } \
format{ } \
use_filesystem{ } \
filesystem{ ext4 } \
mountpoint{ /usr/local } . \
3000 2 6000 ext4 \
method{ format } \
format{ } \
use_filesystem{ } \
filesystem{ ext4 } \
mountpoint{ /tmp } . \
18000 18000 21000 ext4 \
method{ format } \
format{ } \
use_filesystem{ } \
filesystem{ ext4 } \
mountpoint{ / } . \
1000 2 300% linux-swap \
method{ swap } \
format{ } . \
1000 1 10 ext4 \
method{ format } \
format{ } \
use_filesystem{ } \
filesystem{ ext4 } \
mountpoint{ /scratch } .
d-i partman/confirm_write_new_label boolean true
d-i partman/choose_partitionselect Finish partitioning and write
changes to disk
d-i partman/confirm boolean true
d-i partman-partitioning/confirm_copy boolean true
d-i partman/confirm_new_label boolean true
I think what you are missing is the d-i partman-auto/method string regular
line - from the example:
# The presently available methods are: regular, lvm and crypto
d-i partman-auto/method string regular
I also think there's a mistake in your formatting of the partition
sizes. The format (as I know it) is
200 2 250 ext4 \
Which is min_size priority max_size
I think it is also getting confused about the -1 in your / partition
Sean
Re: Libtrash: Have any of you successfully activated it?
Klistvud wrote: Dne, 25. 04. 2011 05:46:18 je Jason Hsu napisal(a): I've been able to get libtrash to PARTIALLY work. It only works on non-empty files and ONLY files deleted through the GUI. Libtrash does NOT work for files deleted through the rm command. What do I need to do to get for libtrash to work for files deleted through the rm command? If this isn't possible, is there another package I can install to fill the gap? http://penguinpetes.com/b2evo/index.php?title=why_can_t_we_throw_away_desktop_trashcanmore=1c=1tb=1pb=1 It won't exactly fill the gap, but is a funny read nonetheless. Perhaps btrfs, with its roll-back capability, is what you're after. For the occasional undelete now and then, it's bound to be better than any userland trashcan implementation. I suspect the most likely solution is to rename rm and replace it with a script that moves files into the trash directory. Bob McConnell N2SPP -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db54dd1.3090...@lightlink.com
Re: Sending from newsreader
On Sun, 24 Apr 2011 22:02:21 +0200, Siard wrote: Op Sun, 24 Apr 2011 Andrei Popescu wrote: On Du, 24 apr 11, 13:18:25, Siard wrote: I'm following this list through the newsgroup using Sylpheed. Which newsgroup? Make sure it's using a bi-directional gateway (like gmane does). linux.debian.user. Which server uses that? Gmane's is gmane.linux.debian.user I replied to Camaleón's post using Gmane, but as I understand, posting for the first time may take some days before being accepted. You first need to reply to the Gmane authorization e-mail. Once Gmane can verify that you are a human and not a robot (aren't you a robot, right? :- P), then you can start sending messages normally. I have tried to reply to your post using Pan, but then I got the message below. (...) That reply seems coming from another host... this list is not moderated, you can post/reply messages without the need to be subscribed. BUT I found that if I move your post from the newsgroup in Sylpheed to a mail folder, I can reply from there, while the 'In-Reply-To' and the 'References' in the headers seem OK, so the thread is not even broken. It looks like I've found another way to take part in this mailing list without being subscribed, and without using Gmane. Yep, I guess multi-featured clients like Thunderbird/Icedove/Evolution will do the same way :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.10.54...@gmail.com
Re: docx; was Re^2: OTF conversion without OpenOffice
On Sun, 24 Apr 2011 23:10:10 +0100, Lisi wrote: On Sunday 24 April 2011 18:34:55 Camaleón wrote: On Sun, 24 Apr 2011 18:28:29 +0100, Lisi wrote: On Sunday 24 April 2011 16:38:23 Camaleón wrote: On Sun, 24 Apr 2011 08:27:33 -0800, peasthope wrote: MS invented docx. Now when John Doe wants to say Summer Vacation Planning Meeting. Bring your coffee mug to the boardroom at 3:00. he can send an archive containing a hierarchy of a dozen or so files. Several kB in total. Why not .txt? Even simpler, will retain all the information and be readable with almost anything. How about images and text formatting? With plain text files you miss them (html should be a nice alternative but again, images have to be enclosed apart) ;-) There are no images in the text above. it is just that - simple text. Summer Vacation Planning Meeting. Bring your coffee mug to the boardroom at 3:00. Oh, well, if you put it that way... there is no need to make a document for that, just send an e-mail or upload a new twitter ;-) I was not referring to a putative complicated document, but to this specific example, and others like it. For this specific example .pdf is overkill. I took the above just as a sarcastic example... I don't think the user is named John Doe :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.11.01...@gmail.com
Re: Re (3): docx; was Re^2: OTF conversion without OpenOffice
On Sun, 24 Apr 2011 17:19:35 -0800, peasthope wrote: From: Camaleon Date: Sun, 24 Apr 2011 16:28:01 + (UTC) What you are getting is a common/documented error, don't worry. To solve it you have to edit the XML file and remove the line at the top that links the XML with a stylesheet (XSL). For example: ?xml version=1.0 encoding=ISO-8859-1? ?xml-stylesheet type=text/xsl href=file.xsl? ... Just remove the second line. Haven't found anything invoking the style sheet in document.xml. It begins with these lines. ?xml version=1.0 encoding=UTF-8 standalone=yes? w:document xmlns:ve=http://schemas.openxmlformats.org/markup-compatibility/2006; xmlns:o=urn:schemas-microsoft-com:office:office I've yet to use a stylesheet and wonder whether there is a way to invoke one implicitly or indirectly. Can you upload the whole XML file to an online service (only if the file does not contain sensible data) or sending it to me directly? I would like to take a look, just out of curiosity. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.11.20...@gmail.com
Re: single cable dual nic?
On Sun, 24 Apr 2011 21:29:55 -0400, Jim Green wrote: I have a asus p8p67 deluxe board and it has two nics and two ports, I am thinking of bonding them to one nic, but I only have one cable so will only use one port. Will this do much help to the throughput/speed? If I have two cables connecting to both ports I think it will definitely help, but here I only be using one cable/one port and two nics bonded to one virtual nic. You need two cables to make any of the bonding capabilities to be effective :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.11.23...@gmail.com
Re: Issue writing image to disk via dd
On Mon, Apr 25, 2011 at 4:54 PM, Mark Kane m...@mkproductions.org wrote: [...] So the problem only happens when overwriting the live system in either Etch or Squeeze. Lenny works exactly as expected so I guess I could try upgrading the remote server from Etch to Lenny and then do it, but it still seems odd that it would not work in Etch, work in Lenny, and then not work again in Squeeze. if u insist on overwriting a live system, at least try remounting root with the ro flag first. Cheers, Tao -- http://huangtao.me/ School of Mathematical Science Peking University -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=ozy5oyq9sjk9qpgkfpcunsjp...@mail.gmail.com
Re: firefox gimp buttons missing - gtk issue?
On Mon, 25 Apr 2011 05:08:11 +, i'll teach you to turn away. wrote: Camaleón wrote: Cn On Sun, 24 Apr 2011 08:54:12 +, i'll teach you to turn away. wrote: but the point is still being missed. will it fix gimp? i can live without firefox buttons, but the gimp problem is impactful. i've found nothing in bug reports regarding this. Cn This is not a bulletproof science :-), you try and see how it goes. Cn (IIRC, both GIMP and Iceweasel use tango icons by default) well, i hoped i could thank you for pushing me into it, but while my firefox icons are back (yay), gimp's still without its proper status bar. homer simpson mode on Ouch! /homer simpson mode off At least you have 50% of the problem solved... and ~10 MiB less of available hard disk space O:-) i updated the title bar to accommodate, but i still wish for a real solution. thanks for trying, guys. I would open a bug report in Debian stating the problem with Gimp, and don't forget to point to the referred bug of Firefox (as they can be related). Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.11.31...@gmail.com
Re: Issue writing image to disk via dd
On Mon, Apr 25, 2011, at 12:04:41 +0200, Klistvud wrote: Hmm, perhaps your live system is performing some disk writes *while* your dd is doing its thing, thus effectively overwriting (corrupting) some sectors already written by dd? All of the OS versions I was trying in my test environment were clean installs with nothing running except the basics like syslog, cron, etc. When the same exact image and dd command was succeeding on all but the two Debian versions I was trying, I figured it was something specific with those versions. Then eventually I tried Lenny where it worked and that added further confusion as to what was happening. That said, it looks like you are 100% correct. If I kill off some of those processes, remount / as read only, and then run dd, it succeeds. So simple yet overlooked on my part due to it working in other versions with very similar environments without that step being necessary. Thanks a lot to everyone who replied, and I apologize for the confusion. -Mark -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425064124.6987d...@mkproductions.org
Re: weather program not working anymore
Dom wrote: On 25/04/11 07:16, Kamaraju S Kusumanchi wrote: I just had a look at the Weather homepage: http://fungi.yuggoth.org/weather/ and it looks like the format of the request and data has changed. There is a partial fix on that page, and a new version of Weather is being worked on. No idea when that might filter into Debian, if it makes it into Squeeze at all. Looks like you have to specify location by state zone number, rather than city. Hope that helps a bit. It helps. Thanks. -- Kamaraju S Kusumanchi http://malayamaarutham.blogspot.com/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ip3n6j$gld$1...@dough.gmane.org
Re: list all the devices connected to the router
On Apr 25, 2011 4:15 AM, Klistvud quotati...@aliceadsl.fr wrote: Dne, 25. 04. 2011 01:47:01 je Kamaraju S Kusumanchi napisal(a): Any other ideas? thanks Well, here's the one-liner I use (a crontab entry actually): for ip in $(seq 1 254); do ping -c 1 192.168.1.$ip/dev/null; [ $? -eq 0 ] echo 192.168.1.$ip || : ; done As with what I posted, reset your arp cache first. Though, you might want to exclude any local addresses from netstat so that you don't mess anything up in the process. Also it would probably be fun to reset an arp cache while connected to an l2tp vpn. ... though if you can easily set the stale time to something short like a second and then put it back, that might have the same end result you want with less work. Though, this is just something to do for fun or in special cases. DON'T DO THIS ON NORMAL X86 DEBIAN INSTALLS. There's just no reason. Do you use a tooth pick to spread butter on your toast? Why, it might be fun or something...? Again, the right tool for the job - nmap, hping, scapy all come to mind. If you want to monitor your network, nagios, cacti, etc. Than again, maybe you're the type that wants to win the guiness record for 'fastest man in a baby stroller' ok, actually that sounds fun. Maybe that's why I've done this before :)
Re: single cable dual nic?
On Apr 25, 2011 7:25 AM, Camaleón noela...@gmail.com wrote: On Sun, 24 Apr 2011 21:29:55 -0400, Jim Green wrote: I have a asus p8p67 deluxe board and it has two nics and two ports, I am thinking of bonding them to one nic, but I only have one cable so will only use one port. Will this do much help to the throughput/speed? If I have two cables connecting to both ports I think it will definitely help, but here I only be using one cable/one port and two nics bonded to one virtual nic. You need two cables to make any of the bonding capabilities to be effective :-) Can this even be done on a dumb switch? I remember there were quite a few options to get the 'bond' interface to work. But, I figured one way or the other, you needed hardware on the other end to know what the hell you're doing?
Re: Issue writing image to disk via dd
Mark writes: So the problem only happens when overwriting the live system in either Etch or Squeeze. Lenny works exactly as expected... They all work as expected: unpredictably. I could try upgrading the remote server from Etch to Lenny and then do it... And get unpredictable results. What problem are you trying to solve? -- John Hasler -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/874o5ma3t1@thumper.dhh.gt.org
Re: single cable dual nic?
On Sun, 24 Apr 2011, Jim Green wrote: I have a asus p8p67 deluxe board and it has two nics and two ports, I am thinking of bonding them to one nic, but I only have one cable so will only use one port. Will this do much help to the throughput/speed? If I have two cables connecting to both ports I think it will definitely help, but here I only be using one cable/one port and two nics bonded to one virtual nic. Your board has Realtek 8111Es for NICs. I won't sugar-coat it: that stuff cannot be called good gigabit ethernet NICs in any way. Its only saving grace is that it is dirty cheap. Try to get jumbo frames working on your network, it should help you get better throughput _if it works right_. You just have to set the MTU to the *same jumbo frame size* on *every host on your network* to enable that. But make sure your switch can handle jumbo frames first, and that such support is enabled. Example jumbo MTU sizes: 9000, 7200, 4000. Which one you can reliably use depends on the least capable device in your network and their bugs. I would expect bonding to actually make things worse with r8169-based NICs, but maybe it would distribute the interrupts better and give you better performance at the cost of wasting even more CPU resources. This is only cost-effective if you happen to have a gigabit managed switch capable of link bonding (LACP) already, or when directly connecting two computers. Bonding with just one cable simply doesn't help performance. Either the devices notice the missing link and disable the offending ports (and you'll be slightly worse off than you'd be without any bonding in the first place), or you will have the packet loss from hell. -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425133254.ga18...@khazad-dum.debian.net
How I can remove my folder icons in desktop screen?
Hi, everyone From onetime ago, In my desktop screen, the icons of direcotry and files in my home folder appears. When I remove the icon in my desktop screen, the folder of that icons is removed really. I do not like the icons of my folder appears in default desktop screen. How can I remove the icons not erasing real directories and files in my folder? My system is squeeze. Thanks in advance. Best Regards, J.Hwan Kim -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db5789e.2020...@gmail.com
Re: single cable dual nic?
On Mon, 25 Apr 2011, shawn wilson wrote: Can this even be done on a dumb switch? I remember there were quite a few No. The switch needs to support LACP for auto-configuring bonded links. You might even find an unmanaged switch capable of such, but it won't be a dumb switch by any means. Your best bet is a managed/web switch that lists 802.3ad/LACP support in its datasheet. options to get the 'bond' interface to work. But, I figured one way or the other, you needed hardware on the other end to know what the hell you're doing? Yes. Even LACP for autoconfiguration is not usually enabled by default. -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425134117.gb18...@khazad-dum.debian.net
Re: file systems
This discussion http://phoronix.com/forums/showthread.php?36507-Large-HDD-SSD-Linux-2.6.38-File-System-Comparison/page6 treats also how to weigh safety against performance and the developer of ext4 (tytso) participated in the forum. -- Best regards, Jörg-Volker. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/ip3u1o$lfe$1...@dough.gmane.org
Re: How I can remove my folder icons in desktop screen?
On Mon, 2011-04-25 at 22:35 +0900, J.Hwan.Kim wrote: Hi, everyone From onetime ago, In my desktop screen, the icons of direcotry and files in my home folder appears. When I remove the icon in my desktop screen, the folder of that icons is removed really. I do not like the icons of my folder appears in default desktop screen. How can I remove the icons not erasing real directories and files in my folder? My system is squeeze. Thanks in advance. Best Regards, J.Hwan Kim Assuming gnome: start gconf-editor (start with terminal or the menu: Applications - System tools - Configuration editor) go to apps - nautilus - desktop There you can find check boxes to enable/disable some icons (network, computer, home directory and trash) Kind regards, Steven signature.asc Description: This is a digitally signed message part
Re: sysctl vs kernel .config
Jim Green wrote at 2011-04-23 22:53 -0500: first is run time and the latter is compile time, but what is the difference here, is one of the other's subset? do their parameters overlap? which is the preferred file to change? changing .config requires a recompile. I suppose that if a setting can be changed by both .config and sysctl, then .config is setting the default and sysctl is adjusting *from* the default. I doubt that compile time would be affected. signature.asc Description: Digital signature
Re: New to Linux
On Thursday 21 April 2011 21:15:11 Heddle Weaver wrote: ... Yes, I've found this to be exactly the case. I've developed a strong interest in quantum, chaos and game theory so I decided to up my math ability. Applied to the local tech. colleges and discovered that they could teach me household budgeting and a bit about statistics. ... There are many online resources now for people of all ability and ambition levels. MIT Opencourseware, for example, has a lot of fairly advanced math and science course content online: http://ocw.mit.edu/index.htm There are many other college level resources available, also. Teaching yourself is more difficult than attending classes, of course. -Chris | Christopher Judd, Ph. D. | | Research Scientist III | | NYS Dept. of Health j...@wadsworth.org | | Wadsworth Center - ESP | | P. O. Box 509518 486-7829 | | Albany, NY 12201-0509 | IMPORTANT NOTICE: This e-mail and any attachments may contain confidential or sensitive information which is, or may be, legally privileged or otherwise protected by law from further disclosure. It is intended only for the addressee. If you received this in error or from someone who was not authorized to send it to you, please do not distribute, copy or use it or any attachments. Please notify the sender immediately by reply e-mail and delete this from your system. Thank you for your cooperation. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201104250943.56388.j...@wadsworth.org
Re: How I can remove my folder icons in desktop screen?
2011년 04월 25일 22:49, Steven 쓴 글: On Mon, 2011-04-25 at 22:35 +0900, J.Hwan.Kim wrote: Hi, everyone From onetime ago, In my desktop screen, the icons of direcotry and files in my home folder appears. When I remove the icon in my desktop screen, the folder of that icons is removed really. I do not like the icons of my folder appears in default desktop screen. How can I remove the icons not erasing real directories and files in my folder? My system is squeeze. Thanks in advance. Best Regards, J.Hwan Kim Assuming gnome: start gconf-editor (start with terminal or the menu: Applications - System tools - Configuration editor) go to apps - nautilus - desktop There you can find check boxes to enable/disable some icons (network, computer, home directory and trash) I tried as you told. The computer, trash, network and home icons could be erased or shown, but my contents of my account directory could not be erased. For example, the icon of temp directory existing in /home/frog (my account is frog) could not be erased in Desktop screen. Further advice is needed. Thanks in advnace. Best Regards, J.Hwan Kim -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db58247.7050...@gmail.com
Re: Using Files Without Mounting A Share From Another System
On Sun, 24 Apr 2011 20:33:45 +, Liam O'Toole wrote: On 2011-04-24, Camaleón wrote: (...) Once the user trusts the application, the local JVM will load and run the JAR file exactly as if it had originally resided on the local hard drive. Yes, but not all java applications are ready to be used with that method. If you can tell me a sample case, I will test :-) --- SNIP --- I cannot provide you with a sample case to prove a negative! Instead I invite you to download the sample .jnlp file in the link I provided earlier and modify it to suit your LAN. Okay, I just have tried to create a JNLP file to launch the JAR file that is stored on a samba share but I'm still facing the same problem that we are encountering from the beginning: smb:// protocol is not detected ;-( If I place the test.jnlp file locally it can be run (it fails because it looks for a signature file that seems to be missed from the original jar but anyway it recognizes the JAR and tries to launch it), but when I put the same test.jnlp file over a samba share and run the app from a linux client it does not work (java.io.FileNotFoundException: smb:/host/ share/test.jnlp (No such file or directory). Needless to say the same test.jnlp that is located on the network share runs fine when it's launched from a windows client ;-( Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.14.21...@gmail.com
Re (2): docx; was Re^2: OTF conversion without OpenOffice
Camaleon Lisi, From: Camaleon noela...@gmail.com Date: Mon, 25 Apr 2011 11:01:58 + (UTC) I took the above just as a sarcastic example... Definitely a sarcastic example; to accompany my remark about the computer being a sorcerer's apprentice for most users. At a social event such as an office party, ask a non-technical person to explain what the WWW is. Don't ask point blank of course but work it into the conversation. While hardware becomes faster and MS complexifies their software, the user's comprehension recedes. [The private copy of this was unintentional.] Regards, ... Peter E. -- Telephone 1 360 450 2132. bcc: peasthope at shaw.ca Shop pages http://carnot.yi.org/ accessible as long as the old drives survive. Personal pages http://members.shaw.ca/peasthope/ . -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/171056985.30312.26162@heaviside.invalid
Re: Tripwire can't send report by email [OT but not really]
Cedric, I don't have much to offer on your problem with tripwire, but your emails to debian-user are being caught by a spam filter that I have recently installed that is claimed by its author to filter out 'unreadable' spam. This may be happening to other subscribers ot debian-user. If one of them, more knowledgeable than me, could look at my request for help with a procmail recipe, we might both benefit. The reason for my request was/is that a noticed these apparently well-form emails from you being caught by this complicated, and to me, unintelligible recipe. Paul On 20110424_072842, Cedric DC wrote: Hello, I repost my question because I don't have posted it in the right way. I'm sorry, it's my first post in the Debian mailing list. I have setup tripwire on a Debian 6. I have tripwire integrity reports (pwr files) in the directory /var/lib/tripwire/report/ With the following command I can read the report. twprint --print-report --twrfile proxytest-20110421-135326.twr test-log I would like send the report by email. In the file /etc/cron.daily/tripwire there is the command tripwire --check --quiet --email-report If I try to launch this in command line I have this message : root@proxytest:/etc/cron.daily# /usr/sbin/tripwire --test --email t...@mydomain.com Sending a test message to: t...@mydomain.com ### Error: The SMTP server returned an error. ### Error Number:504 5.5.2 tripwire@proxytest: Sender address rejected: need ### fully-qualified address ### Exiting... Email test failed. proxytest is the hostname of my server Do you have an idea to solve this issue ? I tried to change in the twcfg the variable SMTPHOST by smtp.altitudetelecom.fr (my ISP SMTP relay) instead of localhost. But it doesn't work... Thank you in advance for your help. Cedric -- Paul E Condon pecon...@mesanetworks.net -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425144039.ga4...@big.lan.gnu
Re: Procmail question/puzzle
Hello Paul E Condon, Am 2011-04-24 14:13:26, hacktest Du folgendes herunter: ## 'unreadable' mail :0: * 1^0 ^\/Subject:.*=\?(.*big5|iso-2022-jp|ISO-2022-KR|euc-kr|gb2312|ks_c_5601-1987|windows-1251|windows-1256)\? * 1^0 ^\/Content-Type:.*charset=(.*big5|iso-2022-jp|ISO-2022-KR|euc-kr|gb2312|ks_c_5601-1987|windows-1251|windows-1256) unreadable_ To let this work, you have to give them a NEGATIVE score first and escape the - like :0: * -1^0 * 1^1 ^Subject:.*=\?(.*big5|iso\-2022-jp|ISO\-2022-KR|euc\-kr|gb2312|ks_c_5601\-1987|windows\-1251|windows\-1256)\? * 1^1 ^Content-Type:.*charset=(.*big5|iso-2022\-jp|ISO\-2022-KR|euc\-kr|gb2312|ks_c_5601\-1987|windows\-1251|windows\-1256) unreadable_ ## bogofilter spam filtering: :0fw | /usr/bin/bogofilter -eplu But bogofilter mark the message slike spamassassin... You have now to filter out thie crap. Since I do not know bogofilter and the header it sets, I can not help you here. Maybe you can send the full headers of a scanned SPAM message here? Thanks, Greetings and nice Day/Evening Michelle Konzack -- # Debian GNU/Linux Consultant ## Development of Intranet and Embedded Systems with Debian GNU/Linux itsystems@tdnet France EURL itsystems@tdnet UG (limited liability) Owner Michelle KonzackOwner Michelle Konzack Apt. 917 (homeoffice) 50, rue de Soultz Kinzigstraße 17 67100 Strasbourg/France 77694 Kehl/Germany Tel: +33-6-61925193 mobil Tel: +49-177-9351947 mobil Tel: +33-9-52705884 fix http://www.itsystems.tamay-dogan.net/ http://www.flexray4linux.org/ http://www.debian.tamay-dogan.net/ http://www.can4linux.org/ Jabber linux4miche...@jabber.ccc.de ICQ#328449886 Linux-User #280138 with the Linux Counter, http://counter.li.org/ signature.pgp Description: Digital signature
RE: Tripwire can't send report by email
1/ Instruct tripwire to use a real e-mail sender (whether possible) I have read the man tripwire. It's not possible to specify the sender email address. 2/ Configure your MTA/MDA to go out with a real/routeable e-mail address. I try to translate the email address @proxy by @mydomain.com I had in the file /etc/exim4.conf.template this one and restart exim4 # TEST *@*proxytest* $1...@mydomain.com And it's doesn't work Regards Cédric To: debian-user@lists.debian.org From: noela...@gmail.com Subject: Re: Tripwire can't send report by email Date: Sun, 24 Apr 2011 11:19:32 + On Sun, 24 Apr 2011 07:28:42 +, Cedric DC wrote: I repost my question because I don't have posted it in the right way. I'm sorry, it's my first post in the Debian mailing list. Good, but next time avoid using html in messages ;-) (...) ### Error Number:504 5.5.2 : Sender address rejected: need ### fully-qualified address ### Exiting... Email test failed. That usually means that remote server (located at mydomain.com) it has rejected the From: address from your host, which is normal provided that you have not masqueraded (and you need to) your fancy e-mail address when you are going throught Internet. So basically you have to go with one of these options: 1/ Instruct tripwire to use a real e-mail sender (whether possible) 2/ Configure your MTA/MDA to go out with a real/routeable e-mail address Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.24.11.19...@gmail.com
Re: How I can remove my folder icons in desktop screen?
On Mon, 25 Apr 2011 23:16:39 +0900, J.Hwan.Kim wrote: 2011년 04월 25일 22:49, Steven 쓴 글: Assuming gnome: start gconf-editor (start with terminal or the menu: Applications - System tools - Configuration editor) go to apps - nautilus - desktop There you can find check boxes to enable/disable some icons (network, computer, home directory and trash) I tried as you told. The computer, trash, network and home icons could be erased or shown, but my contents of my account directory could not be erased. For example, the icon of temp directory existing in /home/frog (my account is frog) could not be erased in Desktop screen. Further advice is needed. Maybe you are searching for another key: /apps/nautilus/preferences/show_desktop [ ] If you toogle this off all your icons will vanish. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.16.29...@gmail.com
Re: Tripwire can't send report by email
On Mon, 25 Apr 2011 16:28:09 +, Cedric DC wrote: 1/ Instruct tripwire to use a real e-mail sender (whether possible) I have read the man tripwire. It's not possible to specify the sender email address. Recheck man 8 tripwire (test mode), it seems you can configure some e- mailing options... 2/ Configure your MTA/MDA to go out with a real/routeable e-mail address. I try to translate the email address @proxy by @mydomain.com I had in the file /etc/exim4.conf.template this one and restart exim4 # TEST *@*proxytest* $1...@mydomain.com And it's doesn't work Exim (which I hardly know) is a bit sui-generis, there are some pre- configuration options that setup the daemon to act differently (as smarthost, localhost...), maybe someone in the know can give you more accurate steps to properly set it up. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.25.16.47...@gmail.com
RE: Tripwire can't send report by email [OT but not really]
I have change a settings in my hotmail email. I hope that's OK now. Date: Mon, 25 Apr 2011 08:40:39 -0600 From: pecon...@mesanetworks.net To: debian-user@lists.debian.org Subject: Re: Tripwire can't send report by email [OT but not really] Cedric, I don't have much to offer on your problem with tripwire, but your emails to debian-user are being caught by a spam filter that I have recently installed that is claimed by its author to filter out 'unreadable' spam. This may be happening to other subscribers ot debian-user. If one of them, more knowledgeable than me, could look at my request for help with a procmail recipe, we might both benefit. The reason for my request was/is that a noticed these apparently well-form emails from you being caught by this complicated, and to me, unintelligible recipe. Paul On 20110424_072842, Cedric DC wrote: Hello, I repost my question because I don't have posted it in the right way. I'm sorry, it's my first post in the Debian mailing list. I have setup tripwire on a Debian 6. I have tripwire integrity reports (pwr files) in the directory /var/lib/tripwire/report/ With the following command I can read the report. twprint --print-report --twrfile proxytest-20110421-135326.twr test-log I would like send the report by email. In the file /etc/cron.daily/tripwire there is the command tripwire --check --quiet --email-report If I try to launch this in command line I have this message : root@proxytest:/etc/cron.daily# /usr/sbin/tripwire --test --email t...@mydomain.com Sending a test message to: t...@mydomain.com ### Error: The SMTP server returned an error. ### Error Number:504 5.5.2 : Sender address rejected: need ### fully-qualified address ### Exiting... Email test failed. proxytest is the hostname of my server Do you have an idea to solve this issue ? I tried to change in the twcfg the variable SMTPHOST by smtp.altitudetelecom.fr (my ISP SMTP relay) instead of localhost. But it doesn't work... Thank you in advance for your help. Cedric -- Paul E Condon pecon...@mesanetworks.net -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110425144039.ga4...@big.lan.gnu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/col116-w320c5a019a3815da078021a0...@phx.gbl
Can I unset one of apt.conf settings by -o option of apt-get?
Hi, all
Suppose that
$ cat /etc/apt/apt.conf
Acquire {
http::Proxy http://my.proxy.example:80/;;
[snip]
}
then I had a problem:
$ apt-get source util-linux -o Acquire::http::Proxy=''
E: Option Acquire::http::Proxy=: Configuration item specification must
have an =val.
$ apt-get -o Acquire::http::Proxy='' source util-linux
E: Invalid operation util-linux
$ apt-get source -o Acquire::http::Proxy='' util-linux
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Must specify at least one package to fetch source for
That is, I (sometimes) want to unset Acquire::http::Proxy option
temporarily as if it didn't exist in apt.conf.
`man 8 apt-get` tells me that apt-get recognizes -c option and
APT_CONFIG env var, but they are not what I want.
I want to keep other settings untouched rather than unset all of them
(by using an empty apt.conf instead.)
Is this feasible on the current implementation? (apt-get or aptitude)
Thanks in advance.
$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:Debian GNU/Linux testing (wheezy)
Release:testing
Codename: wheezy
$ uname -a
Linux zbox 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux
$ aptitude show apt
[snip]
Version: 0.8.13.1
[snip]
Kai
--
野田 開 noda...@gmail.com
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/banlktik+w1oh7a67+tcgfpv5xsz60zu...@mail.gmail.com
Re: Using Files Without Mounting A Share From Another System
On 2011-04-25, Camaleón noela...@gmail.com wrote: On Sun, 24 Apr 2011 20:33:45 +, Liam O'Toole wrote: On 2011-04-24, Camaleón wrote: (...) Once the user trusts the application, the local JVM will load and run the JAR file exactly as if it had originally resided on the local hard drive. Yes, but not all java applications are ready to be used with that method. If you can tell me a sample case, I will test :-) --- SNIP --- I cannot provide you with a sample case to prove a negative! Instead I invite you to download the sample .jnlp file in the link I provided earlier and modify it to suit your LAN. Okay, I just have tried to create a JNLP file to launch the JAR file that is stored on a samba share but I'm still facing the same problem that we are encountering from the beginning: smb:// protocol is not detected ;-( If I place the test.jnlp file locally it can be run (it fails because it looks for a signature file that seems to be missed from the original jar but anyway it recognizes the JAR and tries to launch it), but when I put the same test.jnlp file over a samba share and run the app from a linux client it does not work (java.io.FileNotFoundException: smb:/host/ share/test.jnlp (No such file or directory). Needless to say the same test.jnlp that is located on the network share runs fine when it's launched from a windows client ;-( That's a pity. I suspect that smb:// it is not supported by Java because, like sftp://, it is not an official scheme[1]. So, you would have to serve the .jnlp file and its resources from an HTTP or FTP server to make the solution truly portable. [1] http://en.wikipedia.org/wiki/URI_scheme#Unofficial_but_common_URI_schemes -- Liam O'Toole Cork, Ireland -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/slrnirbae4.enl.liam.p.otoole@dipsy.tubbynet
Re: single cable dual nic?
On 25 April 2011 09:32, Henrique de Moraes Holschuh h...@debian.org wrote: On Sun, 24 Apr 2011, Jim Green wrote: I have a asus p8p67 deluxe board and it has two nics and two ports, I am thinking of bonding them to one nic, but I only have one cable so will only use one port. Will this do much help to the throughput/speed? If I have two cables connecting to both ports I think it will definitely help, but here I only be using one cable/one port and two nics bonded to one virtual nic. Your board has Realtek 8111Es for NICs. I won't sugar-coat it: that stuff cannot be called good gigabit ethernet NICs in any way. Its only saving grace is that it is dirty cheap. Try to get jumbo frames working on your network, it should help you get better throughput _if it works right_. You just have to set the MTU to the *same jumbo frame size* on *every host on your network* to enable that. But make sure your switch can handle jumbo frames first, and that such support is enabled. Example jumbo MTU sizes: 9000, 7200, 4000. Which one you can reliably use depends on the least capable device in your network and their bugs. I would expect bonding to actually make things worse with r8169-based NICs, but maybe it would distribute the interrupts better and give you better performance at the cost of wasting even more CPU resources. This is only cost-effective if you happen to have a gigabit managed switch capable of link bonding (LACP) already, or when directly connecting two computers. Bonding with just one cable simply doesn't help performance. Either the devices notice the missing link and disable the offending ports (and you'll be slightly worse off than you'd be without any bonding in the first place), or you will have the packet loss from hell. Looking at this, I think I am better off disabling the realtec nic and use intel® 82579 Gigabit LAN controller on the board instead. Thanks! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktimcjqpytax6axo6hhoj7svkqr_...@mail.gmail.com
