Re: how to config wireless card

[Long Wind]

https://wiki.ubuntuusers.de/WLAN/  isn't in English, I can't understand

I have installed wicd, it's great, it needn't kde/gnome
it nearly succeed, but during authentication, it stop
maybe i should try other encryption methods of router

Thank those who reply!

Re: kde install accessibility experience

[Jude DaShiell]

I've read a message on another list tonight that kccm needs to be run in 
a terminal and the accessibility box needs to be checked before it is 
shut down.  There was something else that needed starting so gpg would 
work too.  Some stuff works once all of this is done but kmail does not 
yet talk.


On Sat, 14 Jan 2017, Keith Bainbridge wrote:


Date: Sat, 14 Jan 2017 01:45:32
From: Keith Bainbridge 
To: Jude DaShiell 
Cc: Debian Lists 
Subject: Re: kde install accessibility experience

Suggest you contact Klaus Knopper of knoppix, who had similar issues with a
better half if I remember.

Keith Bainbridge

0447667468

keithrbaugro...@gmail.com

Sent from my APad

On 10 Jan 2017 18:06, "Jude DaShiell"  wrote:


Earlier I wrote the kde-accessibility list and asked how to get kde
accessibility working with kde installed on a system specifically screen
reading accessibility.  I was advised I would need to install the whole
orca dependency stack and get orca up and running and from orca then get
kdespeech started.  I was also told kdespeech would read qt stuff orca
cannot read but wouldn't do much more beyond that.
I tried it and had an interesting install failure experience.
First going into console and installing orca dependency stack on the kde
installation that had already got done was no problem.
The problem started on rebootand I got the graphical environment running
and I know that because espeakup stopped working like it does in the
console.  So next I start orca up and that worked too and I was thinking
I'm just about home free here.  Wrong!  What came up talking on the screen
was I suppose you could call it a dialog to set the system date.  I tried
several times to set the system date in that calendar dialog and though I
was able to set the date, I found no control or way to close the calendar
dialog and go beyond the calendar dialog to get any of kde's accessibility
up and working.  Since then I have read about some variables that may be
helpful exporting before I start up the graphical environment on next
installation try.
Understand, I do my own stuff with computers and do not have sighted
assistance to help out when I do it let alone someone experienced with kde
who can see so that's the explanation for this failed kde accessibility
install experience.



--






--

Re: kde install accessibility experience

[Keith Bainbridge]

Suggest you contact Klaus Knopper of knoppix, who had similar issues with a
better half if I remember.

Keith Bainbridge

0447667468

keithrbaugro...@gmail.com

Sent from my APad

On 10 Jan 2017 18:06, "Jude DaShiell"  wrote:

> Earlier I wrote the kde-accessibility list and asked how to get kde
> accessibility working with kde installed on a system specifically screen
> reading accessibility.  I was advised I would need to install the whole
> orca dependency stack and get orca up and running and from orca then get
> kdespeech started.  I was also told kdespeech would read qt stuff orca
> cannot read but wouldn't do much more beyond that.
> I tried it and had an interesting install failure experience.
> First going into console and installing orca dependency stack on the kde
> installation that had already got done was no problem.
> The problem started on rebootand I got the graphical environment running
> and I know that because espeakup stopped working like it does in the
> console.  So next I start orca up and that worked too and I was thinking
> I'm just about home free here.  Wrong!  What came up talking on the screen
> was I suppose you could call it a dialog to set the system date.  I tried
> several times to set the system date in that calendar dialog and though I
> was able to set the date, I found no control or way to close the calendar
> dialog and go beyond the calendar dialog to get any of kde's accessibility
> up and working.  Since then I have read about some variables that may be
> helpful exporting before I start up the graphical environment on next
> installation try.
> Understand, I do my own stuff with computers and do not have sighted
> assistance to help out when I do it let alone someone experienced with kde
> who can see so that's the explanation for this failed kde accessibility
> install experience.
>
>
>
> --
>
>

Re: Problem google-chrome Flash Player with http://www.nbcnews.com/nightly-news

[solitone]

That's strange. On mine the video is displayed.

solitone@alan:~$ apt-cache policy google-chrome-stable 
google-chrome-stable:
  Installed: 55.0.2883.87-1
  Candidate: 55.0.2883.87-1
  Version table:
 *** 55.0.2883.87-1 500
500 http://dl.google.com/linux/chrome/deb stable/main amd64 Packages
100 /var/lib/dpkg/status

Problem google-chrome Flash Player with http://www.nbcnews.com/nightly-news

[Hugo Vanwoerkom]

Hi

The Flash Player that comes with Google-Chrome has become more noisy 
with newer versions of Google-Chrome.


In the beginning Flash just displayed the video.

Then it displayed the start symbol that you had to click in order for 
the video to start.


Now it displays a puzzle piece with the message to right click the 
puzzle piece and then select "Run the plug-in".


That works generally but it fails with NBC News pages. "Right-click to 
run Adobe Flash Player" appears overlayed by a rotating circle segment. 
but right-click never shows ythe option to run the plug-in.


Can anyone verify this and what is to be done?

Hugo

disk cataloger

[lunixbox]

Hallo , ik zoek een programma als  gwhere = 2007   cdcat = 2013 dus niet 
onderhouden :( Doel alle files namen en data in 1 catalogus/database 
zodat ik kan zoeken, waar wat staat en hoe oud het is. Reden heb te veel 
HD,CD,DVD en USBsticks ,dus kan nooit wat vinden.En geeft een heel 
andere betekenis aan het woord disk jockey !


PS.Wat is de reden dat dit er voor linux niets is ? voor ms$ vind je 
veel van dit soort programma's,had zelf ooit advanced disk catalog voor ms$.

SOLVED: Wireless Disconnects, Requires Reboot

[Alphonse Ogulla]

It was more of a hardware maintenance issue than a kernel driver issue.

Opening the back laptop cover, removing the mini PCI-E WLAN WiFi board and
firmly re-seating it solved the problem. Also took the opportunity to blow
dry (without the heater element) all the dust inside the laptop.

On Mon, Apr 4, 2016 at 9:19 PM Alphonse Ogulla  wrote:

> Greetings.
>
> I'm running Jessie on an Acer Aspire 5745DG laptop with a Broadcom
> BCM43225 wireless chip. Wireless LAN has always worked flawlessly
> until recently when it started disconnecting abruptly, showing not
> available then disappearing from Network Manager. This can happen
> anytime between 10 minutes and 1 week of working with the only way of
> recovering being a reboot. Both the open-source and proprietary
> drivers produce the same results.
>
> I have since purchased a USB WiFi adaptor (Realtek RT8188eu) as a fall
> back measure but would prefer to have the main PCI WiFi adaptor
> working again. Any help will be greatly appreciated.
>
> My System.
> a) Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
> b) Driver Modules: brcmsmac, mac80211, cfg80211, bcma, brcmutil, cordic
> c) Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u4
> (2016-02-29) x86_64 GNU/Linux
>
> What I have Tried
> a) Restart Network Manager
> b) Unloading and reloading the drivers
> c) Trying the proprietary wl driver
> d) Setting REGDOMAIN in /etc/default/crda
> e) Installing rfkill and ensuring Wireless is NOT soft or hard blocked.
> f) Googling and trying instructions at
>
> http://askubuntu.com/questions/503936/wireless-randomly-becoming-phantom-hardblocked-only-fixed-by-reboot
>
> Dmesg Snippet
> >
> > [75536.589575] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos
> enabled: false (implement)
> > [75536.589588] brcmsmac bcma0:0: brcms_ops_config: change power-save
> mode: false (implement)
> > [75536.590676] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> > [75539.587022] wlan0: authenticate with e0:69:95:xx.xx.xx
> > [75539.587103] wlan0: send auth to e0:69:95:xx.xx.xx (try 1/3)
> > [75539.589717] wlan0: authenticated
> > [75539.589961] wlan0: associate with e0:69:95:38:38:d3 (try 1/3)
> > [75539.592452] wlan0: RX AssocResp from e0:69:95:38:38:d3 (capab=0x411
> status=0 aid=4)
> > [75539.593092] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
> associated
> > [75539.593097] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos
> enabled: true (implement)
> > [75539.593108] wlan0: associated
> > [75539.593121] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> > [75539.596486] brcmsmac bcma0:0: wl0: brcms_c_d11hdrs_mac80211:
> \xffd8sۚ txop exceeded phylen 159/256 dur 1778/1504
> > [75539.602524] brcmsmac bcma0:0: wl0: brcms_c_d11hdrs_mac80211:
> \xffd8sۚ txop exceeded phylen 137/256 dur 1602/1504
> > [75563.605657] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp
> filtering: 1 addresses (implement)
> > [81755.330981] brcmsmac bcma0:0: wl0: brcms_c_watchdog: dead chip
> > [81755.462986] brcmsmac bcma0:0: ops->tx called while down
> > [81755.988124] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
> disassociated
> > [81755.988136] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp
> filtering: 1 addresses (implement)
> > [81755.988140] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos
> enabled: false (implement)
> > [81755.988145] brcmsmac bcma0:0: wl0: brcms_c_wme_setparams : no-clock
> > [81755.988148] brcmsmac bcma0:0: wl0: brcms_c_wme_setparams : no-clock
> > [81755.988151] brcmsmac bcma0:0: wl0: brcms_c_wme_setparams : no-clock
> > [81755.988153] brcmsmac bcma0:0: wl0: brcms_c_wme_setparams : no-clock
> > [81755.995598] cfg80211: Calling CRDA to update world regulatory domain
> > [81756.115171] brcmsmac bcma0:0: ops->tx called while down
> > [81756.115183] brcmsmac bcma0:0: ops->tx called while down
> > ...
> > ...
> > [81756.283287] brcmsmac bcma0:0: ops->tx called while down
> > [81756.330413] cfg80211: World regulatory domain updated:
> > [81756.330419] cfg80211:  DFS Master region: unset
> > [81756.330421] cfg80211:   (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> > [81756.330426] cfg80211:   (2402000 KHz - 2472000 KHz @ 4 KHz),
> (N/A, 2000 mBm), (N/A)
> > [81756.330429] cfg80211:   (2457000 KHz - 2482000 KHz @ 4 KHz),
> (N/A, 2000 mBm), (N/A)
> > [81756.330433] cfg80211:   (2474000 KHz - 2494000 KHz @ 2 KHz),
> (N/A, 2000 mBm), (N/A)
> > [81756.330437] cfg80211:   (517 KHz - 525 KHz @ 8 KHz,
> 16 KHz AUTO), (N/A, 2000 mBm), (N/A)
> > [81756.330441] cfg80211:   (525 KHz - 533 KHz @ 8 KHz,
> 16 KHz AUTO), (N/A, 2000 mBm), (0 s)
> > [81756.330444] cfg80211:   (549 KHz - 573 KHz @ 16 KHz),
> (N/A, 2000 mBm), (0 s)
> > [81756.330447] cfg80211:   (5735000 KHz - 5835000 KHz @ 8 KHz),
> (N/A, 2000 mBm), (N/A)
> > [81756.330451] cfg80211:   (5724 KHz - 6372 KHz @ 216 KHz),
> 

SOLVED: Broadcom BCM43225 Wireless Shows Not Connected then Hardware Disabled

[Alphonse Ogulla]

It was more of a hardware maintenance issue than a kernel driver issue.

Opening the back laptop cover, removing the mini PCI-E WLAN WiFi board and
firmly re-seating it solved the problem. Also took the opportunity to blow
dry (without the heater element) all the dust inside the laptop.

On Fri, Apr 15, 2016 at 8:22 PM Alphonse Ogulla  wrote:

> The output of the "wireless-info" script when wireless disconnects then
> becomes "hardware disabled" is pasted below.
>
>
> ## wireless info START ##
>
> Report from: 08 Apr 2016 14:21 EAT +0300
>
> Booted last: 08 Apr 2016 13:58 EAT +0300
>
> Script from: 27 Sep 2015 00:34 UTC +
>
> # release ###
>
> Distributor ID: Debian
> Description: Debian GNU/Linux 8.4 (jessie)
> Release: 8.4
> Codename: jessie
>
> # kernel 
>
> Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-1 (2016-03-06) x86_64
> unknown unknown GNU/Linux
>
> Parameters: ro, quiet
>
> # desktop ###
>
> sed: can't read /root/.dmrc: No such file or directory
>
> Could not be determined.
>
> # lspci #
>
> 02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v1.0 Gigabit
> Ethernet [1969:1073] (rev c0)
> Subsystem: Acer Incorporated [ALI] Device [1025:0463]
> Kernel driver in use: atl1c
>
> 03:00.0 Network controller [0280]: Broadcom Corporation BCM43225
> 802.11b/g/n [14e4:4357] (rev 01)
> Subsystem: Foxconn International, Inc. T77H103.00 Wireless Half-size Mini
> PCIe Card [105b:e021]
> Kernel driver in use: bcma-pci-bridge
>
> # lsusb #
>
> Bus 002 Device 003: ID 0489:e011 Foxconn / Hon Hai
> Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 005: ID 0955:7002 NVidia Corp.
> Bus 001 Device 004: ID 0461:4d20 Primax Electronics, Ltd HP Optical Mouse
> Bus 001 Device 003: ID 0402:9665 ALi Corp. Gateway Webcam
> Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> # PCMCIA card info ##
>
> 'pccardctl' is not installed (package "pcmciautils").
>
> # rfkill 
>
> 0: acer-wireless: Wireless LAN
> Soft blocked: no
> Hard blocked: no
> 1: acer-bluetooth: Bluetooth
> Soft blocked: no
> Hard blocked: no
> 2: phy0: Wireless LAN
> Soft blocked: no
> Hard blocked: yes
> 3: hci0: Bluetooth
> Soft blocked: no
> Hard blocked: no
>
> # lsmod #
>
> brcmsmac  515930  0
> cordic 12352  1 brcmsmac
> brcmutil   13093  1 brcmsmac
> acer_wmi   30174  0
> mac80211  474216  1 brcmsmac
> sparse_keymap  12818  1 acer_wmi
> cfg80211  405538  2 brcmsmac,mac80211
> rfkill 18867  5 cfg80211,acer_wmi,bluetooth
> mxm_wmi12515  1 nouveau
> bcma   37206  1 brcmsmac
> wmi17339  3 acer_wmi,mxm_wmi,nouveau
> video  18096  2 acer_wmi,nouveau
>
> # interfaces 
>
> source /etc/network/interfaces.d/*
>
> auto lo
> iface lo inet loopback
>
> # ifconfig ##
>
> eth0  Link encap:Ethernet  HWaddr 
>   UP BROADCAST MULTICAST  MTU:1500  Metric:1
>   RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>   TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>   collisions:0 txqueuelen:1000
>   RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> wlan0 Link encap:Ethernet  HWaddr 
>   BROADCAST MULTICAST  MTU:1500  Metric:1
>   RX packets:8224 errors:0 dropped:0 overruns:0 frame:0
>   TX packets:7239 errors:0 dropped:0 overruns:0 carrier:0
>   collisions:0 txqueuelen:1000
>   RX bytes:355 (6.3 MiB)  TX bytes:1346735 (1.2 MiB)
>
> # iwconfig ##
>
> eth0  no wireless extensions.
>
> lono wireless extensions.
>
> wlan0 IEEE 802.11bgn  ESSID:off/any
>   Mode:Managed  Access Point: Not-Associated   Tx-Power=off
>   Retry short limit:7   RTS thr:off   Fragment thr:off
>   Encryption key:off
>   Power Management:off
>
>
> # route #
>
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric RefUse
> Iface
>
> # resolv.conf ###
>
> # network managers ##
>
> Installed:
>
> NetworkManager
>
> Running:
>
> root   709 1  0 13:58 ?00:00:00 /usr/sbin/NetworkManager
> --no-daemon
>
> # NetworkManager info ###
>
> GENERAL.DEVICE: eth0
> GENERAL.TYPE:   ethernet
> GENERAL.VENDOR: Qualcomm Atheros
> GENERAL.PRODUCT:

Re: Cannot autostart apps after boot

[Вадим Колчев]

Thank you, Frank,

Will keep this link for future reference.

13 Янв 2017 г. 10:31 PM пользователь "Frank M" 
написал:

>
>
> On 2017-01-13 02:23 PM, Вадим Колчев wrote:
>
> Thanks for reply. I have managed to solve the issue today. Tried to create
> desktop file again and managed to succeed. Not sure now why it had not
> worked for me for the first time.
>
> Thanks to everyone who did their best to help.
>
>
>  This will help you next time you want to create a desktop file:
>
> http://standards.freedesktop.org/desktop-entry-spec/
> desktop-entry-spec-latest.html#basic-format
>
> Each field is important in the file.
>
>
>
>
> 13 Янв 2017 г. 9:14 PM пользователь "Michael Milliman" <
> michael.e.milli...@gmail.com> написал:
>
> It would help quite a bit if you would let us know which version of debian
> you are using (i.e. wheezy, jessie, stretch, etc.). Personally, I have not
> had this problem at all running jessie. Also, check your log files to see
> if there is anything in them that might explain the problem.
>
>
>
> On 01/12/2017 03:41 PM, Вадим Колчев wrote:
>
>> Hello,
>>
>> Cannot autostart apps after boot. Tried 3 methods:
>>
>> 1) used gnome-tweak-tool and added app to autostart there - no luck;
>> 2) used /etc/rc.local to provide path to app I need to autostart - no
>> luck;
>> 3) used .config/autostart - put myprogram.destop file there - still no
>> luck.
>>
>> What could I be doing wrong?
>>
>> Best regards,
>> Vadim
>>
>
> --
> 73's de Mike, WB5VQX
>
>
>
>

Re: Cannot autostart apps after boot

[Frank M]

On 2017-01-13 02:23 PM, Вадим Колчев wrote:
Thanks for reply. I have managed to solve the issue today. Tried to 
create desktop file again and managed to succeed. Not sure now why it 
had not worked for me for the first time.


Thanks to everyone who did their best to help.


 This will help you next time you want to create a desktop file:

http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html#basic-format

Each field is important in the file.





13 Янв 2017 г. 9:14 PM пользователь "Michael Milliman" 
> 
написал:


It would help quite a bit if you would let us know which version
of debian you are using (i.e. wheezy, jessie, stretch, etc.).
Personally, I have not had this problem at all running jessie.
Also, check your log files to see if there is anything in them
that might explain the problem.



On 01/12/2017 03:41 PM, Вадим Колчев wrote:

Hello,

Cannot autostart apps after boot. Tried 3 methods:

1) used gnome-tweak-tool and added app to autostart there - no
luck;
2) used /etc/rc.local to provide path to app I need to
autostart - no luck;
3) used .config/autostart - put myprogram.destop file there -
still no luck.

What could I be doing wrong?

Best regards,
Vadim


-- 
73's de Mike, WB5VQX

Re: Debian Wheezy se congela con LibreOffice

[Felipe Perry]

Pedro: la gran mayoría de las veces se trata de gtk. Tienes que usar la
interfaz que viene por defecto en Libreoffice, que es fea pero anda muy
bien. Lo otro es desactivar java, yo no lo uso y no lo necesito nunca. Todo
esto se hace en Opciones de Libreoffice.

El 13 de enero de 2017, 15:54, Roberto Quiñones 
escribió:

> 2017-01-13 15:21 GMT-03:00 Pedro :
> >
>
> Pedro,
>
> Bien!!! pero no tenemos bola de cristal para saber el motivo si no nos
> especificas cuando sucede esto, si revisaste los logs, etc.
>
> Saludos.
>
> --
> 
> Roberto Quiñones
>
> Owner - Service Manager and System
> ACShell.NET – Internet Services
> robe...@acshell.net - www.acshell.net
> San Martin #311 Santiago – CL (Chile)
> +560981361713
> 
>
>

Re: Cannot autostart apps after boot

[Вадим Колчев]

Thanks for reply. I have managed to solve the issue today. Tried to create
desktop file again and managed to succeed. Not sure now why it had not
worked for me for the first time.

Thanks to everyone who did their best to help.

13 Янв 2017 г. 9:14 PM пользователь "Michael Milliman" <
michael.e.milli...@gmail.com> написал:

It would help quite a bit if you would let us know which version of debian
you are using (i.e. wheezy, jessie, stretch, etc.). Personally, I have not
had this problem at all running jessie. Also, check your log files to see
if there is anything in them that might explain the problem.



On 01/12/2017 03:41 PM, Вадим Колчев wrote:

> Hello,
>
> Cannot autostart apps after boot. Tried 3 methods:
>
> 1) used gnome-tweak-tool and added app to autostart there - no luck;
> 2) used /etc/rc.local to provide path to app I need to autostart - no luck;
> 3) used .config/autostart - put myprogram.destop file there - still no
> luck.
>
> What could I be doing wrong?
>
> Best regards,
> Vadim
>

-- 
73's de Mike, WB5VQX

Re: Cannot autostart apps after boot

[Michael Milliman]

It would help quite a bit if you would let us know which version of 
debian you are using (i.e. wheezy, jessie, stretch, etc.). Personally, I 
have not had this problem at all running jessie. Also, check your log 
files to see if there is anything in them that might explain the problem.



On 01/12/2017 03:41 PM, Вадим Колчев wrote:

Hello,

Cannot autostart apps after boot. Tried 3 methods:

1) used gnome-tweak-tool and added app to autostart there - no luck;
2) used /etc/rc.local to provide path to app I need to autostart - no 
luck;
3) used .config/autostart - put myprogram.destop file there - still no 
luck.


What could I be doing wrong?

Best regards,
Vadim


--
73's de Mike, WB5VQX

Re: Debian Wheezy se congela con LibreOffice

[Roberto Quiñones]

2017-01-13 15:21 GMT-03:00 Pedro :
>

Pedro,

Bien!!! pero no tenemos bola de cristal para saber el motivo si no nos
especificas cuando sucede esto, si revisaste los logs, etc.

Saludos.

-- 

Roberto Quiñones

Owner - Service Manager and System
ACShell.NET – Internet Services
robe...@acshell.net - www.acshell.net
San Martin #311 Santiago – CL (Chile)
+560981361713

Re: Debian Wheezy se congela con LibreOffice

[Pedro]

Re: apt-secure / apt-get update gpg signature invalid

[aRkadeFR]

After upgrading aptly to newest version (0.9.7), the error disappear.

The only changes I noticed are the inclusion of the SHA512 sums in the files 
and the creation of the content-arch.gz





 Original Message 
Subject: apt-secure / apt-get update gpg signature invalid
Local Time: January 13, 2017 9:57 AM
UTC Time: January 13, 2017 8:57 AM
From: cont...@arkade.info
To: debian-user@lists.debian.org 

Hello,

After setting up a new apt repository with aptly, signing the repository and 
adding the public gpg key to the apt keyring, I encounter a failure during the 
`apt update` command:
Err:3 http://#REPO_URL#/#NAME# #DISTRIBUTION# InRelease The following 
signatures were invalid: #KEY_ID# Hit:4 http://apt.postgresql.org/pub/repos/apt 
sid-pgdg InRelease Reading package lists... Done W: GPG error: 
http://#REPO_URL#/#NAME# #DISTRIBUTION# InRelease: The following signatures 
were invalid: #KEY_ID# E: The repository 'http://#REPO_URL#/#NAME# 
#DISTRIBUTION# InRelease' is not signed. N: Updating from such a repository 
can't be done securely, and is therefore disabled by default. N: See 
apt-secure(8) manpage for repository creation and user configuration details.

And yet the signature and the gpg keys are good. I succeed to verify the gpg 
signature on the InRelease file:

curl http://#REPO_URL#/InRelease | gpg --keyring /etc/apt/trusted.gpg --verify 
gpg: Signature made Wed 11 Jan 2017 04:01:23 PM CET gpg: using RSA key #KEY_ID# 
gpg: Good signature from "#DESCRIPTION_GPG_KEY#" [unknown] gpg: WARNING: This 
key is not certified with a trusted signature! gpg: There is no indication that 
the signature belongs to the owner. Primary key fingerprint: 
#GOOD_KEY_FINGERPRINT#

I also verified the Release and Release.gpg file and they seem correct to me.


I tried to find what's done during the apt update with a strace -o /tmp/strace 
-ff apt update then grep:

grep 'apt.*key' ./strace* ./strace.29829:execve("/usr/bin/apt-key", 
["/usr/bin/apt-key", "--quiet", "--readonly", "verify", "--status-fd", "3", 
"/tmp/apt.sig.ORUwxh", "/tmp/apt.data.kKXyrN"], [/* 28 vars */]) = 0 
./strace.29829:open("/usr/bin/apt-key", O_RDONLY) = 4 
./strace.29888:execve("/usr/bin/apt-key", ["/usr/bin/apt-key", "--quiet", 
"--readonly", "verify", "--status-fd", "3", "/tmp/apt.sig.utRWBD", 
"/tmp/apt.data.Fo1Lka"], [/* 28 vars */]) = 0 
./strace.29888:open("/usr/bin/apt-key", O_RDONLY) = 4 
./strace.29947:execve("/usr/bin/apt-key", ["/usr/bin/apt-key", "--quiet", 
"--readonly", "verify", "--status-fd", "3", "/tmp/apt.sig.ug6xiV", 
"/tmp/apt.data.Yv4zFs"], [/* 28 vars */]) = 0 
./strace.29947:open("/usr/bin/apt-key", O_RDONLY) = 4 
./strace.30006:execve("/usr/bin/apt-key", ["/usr/bin/apt-key", "--quiet", 
"--readonly", "verify", "--status-fd", "3", "/tmp/apt.sig.QSyrCg", 
"/tmp/apt.data.LK9DGO"], [/* 28 vars */]) = 0 
./strace.30006:open("/usr/bin/apt-key", O_RDONLY) = 4

How can I debug and fix this error?

Thanks

Re: apt-build

[TheFox]

Para resolver ése problema tienes que abrir una terminal y ejecutar el
siguiente comando: dpkg --configure -a

Con esto ya debería de estar listo, pero si sigues teniendo el problema una
vez que hayas ejecutado dicho comando debes de realizar estos otros pasos:

1) Borra los archivos .portrm y .list:
sudo rm /var/lib/dpkg/info/*.postrm
sudo rm /var/lib/dpkg/info/*.list

2) Elimina la caché de paquetes y actualiza el sistema:
sudo apt-get clean all
sudo apt-get update
sudo apt-get upgrade
Santiago.

El 13 ene. 2017 8:59, "Antonio Trujillo Carmona"  escribió:

> Tengo que recompilar el paquete freerdp2-x11 que esta en sid.
> Como me he encontrado problemas de compatibilidades de librerías he
> creado una maquina virtual con streecht/sid solo para este proceso, al
> intentar instalar apt-build me da :
> # apt install apt-build
> Leyendo lista de paquetes... Hecho
> Creando árbol de dependencias
> Leyendo la información de estado... Hecho
> Se instalarán los siguientes paquetes NUEVOS:
>   apt-build
> 0 actualizados, 1 nuevos se instalarán, 0 para eliminar y 0 no
> actualizados.
> Se necesita descargar 0 B/42,1 kB de archivos.
> Se utilizarán 180 kB de espacio de disco adicional después de esta
> operación.
> Preconfigurando paquetes ...
> Seleccionando el paquete apt-build previamente no seleccionado.
> (Leyendo la base de datos ... 92041 ficheros o directorios instalados
> actualmente.)
> Preparando para desempaquetar .../apt-build_0.12.45_amd64.deb ...
> Desempaquetando apt-build (0.12.45) ...
> Configurando apt-build (0.12.45) ...
> sed: character class syntax is [[:space:]], not [:space:]
> dpkg: error al procesar el paquete apt-build (--configure):
>  el subproceso instalado el script post-installation devolvió el código
> de salida de error 4
> Procesando disparadores para man-db (2.7.6.1-2) ...
> Se encontraron errores al procesar:
>  apt-build
> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
>
> --
>
> *Antonio Trujillo Carmona*
>
> *Técnico de redes y sistemas.*
>
> *Subdirección de Tecnologías de la Información y Comunicaciones*
>
> Servicio Andaluz de Salud. Consejería de Salud de la Junta de Andalucía
>
> _antonio.trujillo.sspa@juntadeandalucia.es_
>
> Tel. +34 670947670 747670)
>
>
>
>

Re: how to config wireless card

[Henning Follmann]

On Fri, Jan 13, 2017 at 05:20:12PM +0800, Long Wind wrote:
>

[...]
 
> In XP, wireless config is easy

You got to stop saying this! It is annoying!
If you installed the default desktop environment (DE), which is GNOME it
would be as easy. However you insist on doing it the command line way.

So suck it up and read:
Did you already read https://wiki.debian.org/WiFi? 
At the bottom of that is a link: https://wiki.debian.org/WiFi/HowToUse
Read that too! It explains the network managers and how you can configure
wlan in /etc/network/interfaces too.

Read it!


And finally the best advice:
http://www.catb.org/~esr/faqs/smart-questions.html

Read the whole thing!



And at the end if you read all this, still have a few questions or your
wifi still is not operable or if you are intersted to configure your wifi
via systemd (which is not yet covered in the official Debian manuals) come
back and ask.





> connecting cell phone to router is easy too, just enter password
> why it's so hard in Linux?
> I don't have kde or gnome, is there any GUI tool that make it easy and
> not rely on kde/gnome?
> the installer may have some nice program that config wireless?
> should i reinstall debian??
> 





-- 
Henning Follmann   | hfollm...@itcfollmann.com

Re: fallo con apt ANULADO

[Antonio Trujillo Carmona]

El 13/01/17 a las 13:32, Antonio Trujillo Carmona escribió:
> No consigo reparar este fallo:
>
> # apt update
> Ign:1 http://ftp.debian.org/debian testing InRelease
> Err:2 http://ftp.debian.org/debian testing Release
>   403  Forbidden
> Leyendo lista de paquetes... Hecho
> E: El repositorio «http://ftp.debian.org/debian testing Release» no
> tiene un fichero de Publicación.
> N: No se puede actualizar de un repositorio como este de forma segura y
> por tanto está deshabilitado por omisión.
> N: Vea la página de manual apt-secure(8) para los detalles sobre la
> creación de repositorios y la configuración de usuarios.
>
> He probado muchas cosas, como desinstalar , purgar y reinstalar el apt
> (el dpkg si funciona, por lo que puedo bajarme paquetes con otro
> ordenador e instalarlos), cambiar de repositorios, probar con ftp en
> lugar de http y alguna cosa mas que he visto en google.
>
> ¿alguna idea?
>
>

Perdonar la culpa es mía, el proxy no aceptaba peticiones de la red del
equipo. y daba ese error.

Gracias

-- 

*Antonio Trujillo Carmona*

*Técnico de redes y sistemas.*

*Subdirección de Tecnologías de la Información y Comunicaciones*

Servicio Andaluz de Salud. Consejería de Salud de la Junta de Andalucía

_antonio.trujillo.sspa@juntadeandalucia.es_

Tel. +34 670947670 747670)

Re: how to config wireless card

[Dan Ritter]

On Fri, Jan 13, 2017 at 07:32:05PM +0800, Long Wind wrote:
> Thank Jan-Peter Rühmann!
> 
> iw has already been installed.
> the command "iw dev" return nothing.
> i use twm
> 
> i think wifi is mature, so connecting XP or cell phone is easy
> i wish in Linux connecting wireless is as easy as connecting ethernet

That cannot be, because wireless needs to be set up to figure
out which "wire" you want to connect to. 

> (in debian i usually config ethernet by a simple command like  "dhclient 
> eth0")

You can do that, as soon as you connect to an access-point.

Try:

iwlist wlan0 scan
to show what access-points are available

iwconfig wlan0 essid "NETWORK NAME"
to connect to an access-point called "NETWORK NAME"

and then you can do

dhclient wlan0
to get an IP address and probably a default route.

-dsr-

Re: fallo con apt

[Roberto Quiñones]

El 13 ene. 2017 9:32 AM, "Antonio Trujillo Carmona" <
antonio.trujillo.s...@juntadeandalucia.es> escribió:

No consigo reparar este fallo:

# apt update
Ign:1 http://ftp.debian.org/debian testing InRelease
Err:2 http://ftp.debian.org/debian testing Release
  403  Forbidden
Leyendo lista de paquetes... Hecho
E: El repositorio «http://ftp.debian.org/debian testing Release» no
tiene un fichero de Publicación.
N: No se puede actualizar de un repositorio como este de forma segura y
por tanto está deshabilitado por omisión.
N: Vea la página de manual apt-secure(8) para los detalles sobre la
creación de repositorios y la configuración de usuarios.

He probado muchas cosas, como desinstalar , purgar y reinstalar el apt
(el dpkg si funciona, por lo que puedo bajarme paquetes con otro
ordenador e instalarlos), cambiar de repositorios, probar con ftp en
lugar de http y alguna cosa mas que he visto en google.

¿alguna idea?


--

*Antonio Trujillo Carmona*

*Técnico de redes y sistemas.*

*Subdirección de Tecnologías de la Información y Comunicaciones*

Servicio Andaluz de Salud. Consejería de Salud de la Junta de Andalucía

_antonio.trujillo.sspa@juntadeandalucia.es_

Tel. +34 670947670 747670)




Antonio,

Hola, Te fijaste que al intentar leer la ruta del repositorio te está dando
un error 403 del sitio. Yo en tu lugar cambiaría en tus source.list este
repositorio o comentarlo y agregar otro de otra ubicación y verifico de
vuelta.

Saludos.

fallo con apt

[Antonio Trujillo Carmona]

No consigo reparar este fallo:

# apt update
Ign:1 http://ftp.debian.org/debian testing InRelease
Err:2 http://ftp.debian.org/debian testing Release
  403  Forbidden
Leyendo lista de paquetes... Hecho
E: El repositorio «http://ftp.debian.org/debian testing Release» no
tiene un fichero de Publicación.
N: No se puede actualizar de un repositorio como este de forma segura y
por tanto está deshabilitado por omisión.
N: Vea la página de manual apt-secure(8) para los detalles sobre la
creación de repositorios y la configuración de usuarios.

He probado muchas cosas, como desinstalar , purgar y reinstalar el apt
(el dpkg si funciona, por lo que puedo bajarme paquetes con otro
ordenador e instalarlos), cambiar de repositorios, probar con ftp en
lugar de http y alguna cosa mas que he visto en google.

¿alguna idea?


-- 

*Antonio Trujillo Carmona*

*Técnico de redes y sistemas.*

*Subdirección de Tecnologías de la Información y Comunicaciones*

Servicio Andaluz de Salud. Consejería de Salud de la Junta de Andalucía

_antonio.trujillo.sspa@juntadeandalucia.es_

Tel. +34 670947670 747670)

Re: how to config wireless card

[Long Wind]

Thank Jan-Peter Rühmann!

iw has already been installed.
the command "iw dev" return nothing.
i use twm

i think wifi is mature, so connecting XP or cell phone is easy
i wish in Linux connecting wireless is as easy as connecting ethernet
(in debian i usually config ethernet by a simple command like  "dhclient eth0")

it's late and I will follow instructions from
https://wiki.ubuntuusers.de/WLAN/ next day

Re: how to config wireless card

[Jan-Peter Rühmann]

You shouldn´t compare apples and Donuts here, at least compare cli 
configurations.
But that is not the Point.

I´ve used the Descriptions here https://wiki.ubuntuusers.de/WLAN/ to make my 
wlan work in
Herbstluftwm.

Have you installed iw?
Have you installed some Desktop Environment,  if yes which?
Try start the respective Tool from Command Line?

Why do you use Windows Desktop Tools without complaints and in Linux not?
Have you tried to setup Wifi in DOS? ;-)

Am 13.01.2017 um 10:30 schrieb Long Wind:
> Thank Johan DS!
>
> I enter a command from a
> link(https://wiki.archlinux.org/index.php/Wireless_network_configuration)
> you offer:
>
> iw dev
sudo apt-get install iw
> the screen display nothing, where something go wrong?
>
> In XP, wireless config is easy
> connecting cell phone to router is easy too, just enter password
> why it's so hard in Linux?
> I don't have kde or gnome, is there any GUI tool that make it easy and
> not rely on kde/gnome?
> the installer may have some nice program that config wireless?
> should i reinstall debian??
Good luck,
-- 

-=== Jan-Peter Rühmann & Kuma 
===-
 Gubkower Str.7   [  Tel.:  +49 (38205) 65484  ]   
jan-pe...@ruehmann.name
 18195 Prangendorf[  FAX:   +49 (38205) 65212  ]  
http://www.ruehmann.name
  [  Tel.:  +49 (38205) 65215  ]
  [  Mobil: +49 (162) 1316054  ]   
IT-Servicetechniker
Skype: jan-peter_ruehmann / ICQ: 288192920 / WhatsApp: 491621316054 / Twitter: 
@JPRuehmann
--
  Die Verwendung der Daten zu Werbezwecken ist verboten.

Re: no soundcards

[andre_debian]

On Friday 13 January 2017 10:46:11 Raphaël POITEVIN wrote:
> Haricophile  writes:
> > Pulseaudio est une facilité qui détecte "a chaud" les branchements et
> > gère le son réseau, dans l'optique d'un ordi polyvalent pour un
> > utilisateur "final".
> Il peut être exigé si on utilise des bousins comme skype.

Sur mon portable avec Jessie, pas de son sans Pulsaudio,
(avec Alsa).

André

Re: apt-get is not following preferences.d

[Michael Lange]

On Fri, 13 Jan 2017 10:16:06 +0100
Michael Lange  wrote:

(...)
> Not sure, you might try to grep through the files in /etc/init
> and /etc/init.d if you find the one that calls apt-get update , then see
> which package it belongs to and consider removing that package (or maybe
> if possible configure it to leave apt-get alone).

A small correction to this: of course the package should be *purge'd*,
not simply removed, to make sure the file in /etc/init/whatever will
actually go away.

Regards

Michael

.-.. .. ...- .   .-.. --- -. --.   .- -. -..   .--. .-. --- ... .--. . .-.

Women professionals do tend to over-compensate.
-- Dr. Elizabeth Dehaver, "Where No Man Has Gone Before",
   stardate 1312.9.

Re: no soundcards

[Raphaël POITEVIN]

Haricophile  writes:
> Pulseaudio est une facilité qui détecte "a chaud" les branchements et
> gère le son réseau, dans l'optique d'un ordi polyvalent pour un
> utilisateur "final".

Il peut être exigé si on utilise des bousins comme skype.

Raphaël
-- 
Raphaël POITEVIN
Hypra S.A.S.

Re: Problemes per muntar disc dur extern USB

[Narcis Garcia]

Bé, la qüestió és que, formategis com formategis, abans de restaurar les
dades comprovis que s'accedeix bé de totes les maneres i amb tots els
sistemes. Fins i tot que s'accedeix bé a un fitxer que estigui al final
de tot de la partició (plena).



__
I'm using this express-made address because personal addresses aren't
masked enough at lists.debian.org archives.
El 13/01/17 a les 10:30, Pep ha escrit:
> Si perdó. Volia dir que canviava el comportament.
> 
> De fet al treure l'USB o engegar-lo sense l'USB connectat, pots veure el
> contingut en xarxa (comportament NAS) i al ficar l'USB s'apaga i
> modifica aquest comportament. Això m'ajudarà a rescatar les dades si es
> que no puc fer un altre cosa. Entenc que m'aconselles fer la partició
> via SATA. Ho vaig fer via guindo$ perquè es com diu el manual
> d'instruccions, tot i que també te una opció des del mateix Xtreamer
> 
> Gràcies
> 
> 
> El 13/01/17 a les 08:26, Narcis Garcia ha escrit:
>> «NAS» i «Disc Dur USB» són dues coses diferents. Suposo que es tracta de
>> la segona, ja que no va per xarxa i «pots» administrar la taula de
>> particions.
>>
>> Quan facis la nova partició «com cal», si ho fas via S.ATA, aleshores
>> comprova que tant per USB com per S.ATA es veu exactament el mateix, no
>> fos cas que el sistema operatiu empotrat del «Xtreamer Pro» faci algun
>> tipus de traducció de sectors o particions.
>>
>>
>> __
>> I'm using this express-made address because personal addresses aren't
>> masked enough at lists.debian.org archives.
>> El 12/01/17 a les 23:04, Pep ha escrit:
>>> Hola.
>>>
>>> Si l'Xtreamer porta una mena de S.O.  per fer de reproductor, però al
>>> connectar-lo per USB entra en mode NAS / Disc Dur USB.
>>>
>>> Si. Es pot treure i endollar-lo (mitjançant SATA) però dubto que el
>>> resultat sigui diferent (o potser m'equivoco...)
>>>
>>> Potser hauré de fer el que dius, fer una partició "com deu mana" amb el
>>> gparted. Hauré de buscar un lloc per salvar dades ...
>>>
>>> Gracies,
>>>
>>> Pep
>>>
>>>
>>> El 12/01/17 a les 12:35, Narcis Garcia ha escrit:
 Podries aclarir si el «Xtreamer Pro» porta sistema operatiu? Es pot
 extreure aquest disc de 3TB i endollar-lo directament a un ordinador?

 Si les respostes són No i No, jo també provaria el formateig total, amb
 taula de particions GPT feta pel programari lliure (G/parted).
 Naturalment et convindrà traslladar les dades per fer-ho.



 __
 I'm using this express-made address because personal addresses aren't
 masked enough at lists.debian.org archives.


 El 12/01/17 a les 12:26, Pep ha escrit:
> Gràcies Josep.
>
> El firmware del Xtreamer es l'ultim i abans de tornar a formatejar
> (conté dades, pelis i musica bàsicament) voldria intentar algun altre
> cosa. Després de intentar mirar-ho al gparted, me diu "Can't have a
> partition outside the disk!" i malgrat que veu la partició surt una
> icona d'advertència.
>
> ParticióName Sistema de fitxers   
> MidaUtilitzatNo UtilitzatSenyalador  
>
> dev/sdd1Microsoft reserved partitionntfs128.00MiB2.45
> MiB125.55 MiBmsftres
>
> dev/sdd2  (*)  Basic data partition ntfs2.73
> TiB------msftdata
>
> On hi ha l'asterisc surt l'icona d'advertència.
> Salut
> Pep
>
>
>
>
> El 12/01/17 a les 12:05, Josep Lladonosa ha escrit:
>
> On 12 Jan 2017 11:15, "Pep" >
> wrote:
>
> Bones.
>
> En primer lloc disculpeu si la consulta es massa "newbie" però la
> veritat es que porto cercant al google dies i no trobo res adient.
> Consulto aqui per si algú de valtros s'ha trobat amb el mateix 
> problema.
>
>> No m'hi he trobat però cercant una mica he trobat això:
>>
>> - actualitza firmware.
>> - si és un aparell d'aquests que incorpora sistema operatiu, formata
>> el disc des de l'aparell.
>> - també podria ser tema MBR/GPT ja que el disc és de 3 TB i cal
>> preparar-lo en GPT...
>>
>> Josep 
>>
>>
>> Tinc un Xtreamer Pro que faig servir de disc extern USB. Dintre
>> tinc dos
>> discs, un de 2TB i l'altre de 3 TB.
>>
>> Al de 2 TB puc accedir sense cap problema, mel munta
>> automàticament, en
>> canvi al de 3 no(s'escull amb un interruptor quin vols). Faig
>> servir un
>> Debian Stretch 64 bits (potser aquí rau el problema...) Al
>> muntar-lo en
>> consola me tira:
>>
>> NTFS signature is missing.
>> Failed to mount '/dev/sdd': L’argument passat no és vàlid
>> The device '/dev/sdd' doesn't seem to have a valid NTFS.
>> Maybe the wrong device is used? Or the whole disk instead of a

Re: Problemes per muntar disc dur extern USB

[Pep]

Si perdó. Volia dir que canviava el comportament.

De fet al treure l'USB o engegar-lo sense l'USB connectat, pots veure el
contingut en xarxa (comportament NAS) i al ficar l'USB s'apaga i
modifica aquest comportament. Això m'ajudarà a rescatar les dades si es
que no puc fer un altre cosa. Entenc que m'aconselles fer la partició
via SATA. Ho vaig fer via guindo$ perquè es com diu el manual
d'instruccions, tot i que també te una opció des del mateix Xtreamer

Gràcies


El 13/01/17 a les 08:26, Narcis Garcia ha escrit:
> «NAS» i «Disc Dur USB» són dues coses diferents. Suposo que es tracta de
> la segona, ja que no va per xarxa i «pots» administrar la taula de
> particions.
>
> Quan facis la nova partició «com cal», si ho fas via S.ATA, aleshores
> comprova que tant per USB com per S.ATA es veu exactament el mateix, no
> fos cas que el sistema operatiu empotrat del «Xtreamer Pro» faci algun
> tipus de traducció de sectors o particions.
>
>
> __
> I'm using this express-made address because personal addresses aren't
> masked enough at lists.debian.org archives.
> El 12/01/17 a les 23:04, Pep ha escrit:
>> Hola.
>>
>> Si l'Xtreamer porta una mena de S.O.  per fer de reproductor, però al
>> connectar-lo per USB entra en mode NAS / Disc Dur USB.
>>
>> Si. Es pot treure i endollar-lo (mitjançant SATA) però dubto que el
>> resultat sigui diferent (o potser m'equivoco...)
>>
>> Potser hauré de fer el que dius, fer una partició "com deu mana" amb el
>> gparted. Hauré de buscar un lloc per salvar dades ...
>>
>> Gracies,
>>
>> Pep
>>
>>
>> El 12/01/17 a les 12:35, Narcis Garcia ha escrit:
>>> Podries aclarir si el «Xtreamer Pro» porta sistema operatiu? Es pot
>>> extreure aquest disc de 3TB i endollar-lo directament a un ordinador?
>>>
>>> Si les respostes són No i No, jo també provaria el formateig total, amb
>>> taula de particions GPT feta pel programari lliure (G/parted).
>>> Naturalment et convindrà traslladar les dades per fer-ho.
>>>
>>>
>>>
>>> __
>>> I'm using this express-made address because personal addresses aren't
>>> masked enough at lists.debian.org archives.
>>>
>>>
>>> El 12/01/17 a les 12:26, Pep ha escrit:
 Gràcies Josep.

 El firmware del Xtreamer es l'ultim i abans de tornar a formatejar
 (conté dades, pelis i musica bàsicament) voldria intentar algun altre
 cosa. Després de intentar mirar-ho al gparted, me diu "Can't have a
 partition outside the disk!" i malgrat que veu la partició surt una
 icona d'advertència.

 ParticióName Sistema de fitxers   
 MidaUtilitzatNo UtilitzatSenyalador  

 dev/sdd1Microsoft reserved partitionntfs128.00MiB2.45
 MiB125.55 MiBmsftres

 dev/sdd2  (*)  Basic data partition ntfs2.73
 TiB------msftdata

 On hi ha l'asterisc surt l'icona d'advertència.
 Salut
 Pep




 El 12/01/17 a les 12:05, Josep Lladonosa ha escrit:

 On 12 Jan 2017 11:15, "Pep" >
 wrote:

 Bones.

 En primer lloc disculpeu si la consulta es massa "newbie" però la
 veritat es que porto cercant al google dies i no trobo res adient.
 Consulto aqui per si algú de valtros s'ha trobat amb el mateix 
 problema.

> No m'hi he trobat però cercant una mica he trobat això:
>
> - actualitza firmware.
> - si és un aparell d'aquests que incorpora sistema operatiu, formata
> el disc des de l'aparell.
> - també podria ser tema MBR/GPT ja que el disc és de 3 TB i cal
> preparar-lo en GPT...
>
> Josep 
>
>
> Tinc un Xtreamer Pro que faig servir de disc extern USB. Dintre
> tinc dos
> discs, un de 2TB i l'altre de 3 TB.
>
> Al de 2 TB puc accedir sense cap problema, mel munta
> automàticament, en
> canvi al de 3 no(s'escull amb un interruptor quin vols). Faig
> servir un
> Debian Stretch 64 bits (potser aquí rau el problema...) Al
> muntar-lo en
> consola me tira:
>
> NTFS signature is missing.
> Failed to mount '/dev/sdd': L’argument passat no és vàlid
> The device '/dev/sdd' doesn't seem to have a valid NTFS.
> Maybe the wrong device is used? Or the whole disk instead of a
> partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
>
> Gracies per endavant.
>
> Pep
>
>
>
>
>>
>

Re: how to config wireless card

[Long Wind]

Thank Johan DS!

I enter a command from a
link(https://wiki.archlinux.org/index.php/Wireless_network_configuration)
you offer:

iw dev

the screen display nothing, where something go wrong?

In XP, wireless config is easy
connecting cell phone to router is easy too, just enter password
why it's so hard in Linux?
I don't have kde or gnome, is there any GUI tool that make it easy and
not rely on kde/gnome?
the installer may have some nice program that config wireless?
should i reinstall debian??

Re: apt-get is not following preferences.d

[Michael Lange]

Hi,

On Fri, 13 Jan 2017 09:16:50 +0100
Matthias Bodenbinder  wrote:

(...)
> I gave it a try. I unplugged the network and did an apt-get update.
> This is throwing all the errors that the repos are not available. But
> in the end the next "apt-get dist-upgrade" indeed wants to update all
> packages to testing.
> 
> So it seems that this is an issue with network not ready while apt-get 
> update is being performed.
> 
> How do I fix this? Where to look?

Not sure, you might try to grep through the files in /etc/init
and /etc/init.d if you find the one that calls apt-get update , then see
which package it belongs to and consider removing that package (or maybe
if possible configure it to leave apt-get alone).
Or, a quick-and-dirty solution that I have been using here occasinally
with services that fail at boot because the network isn't ready yet, you
can try to restart that service (or simply force another apt-get update)
with a line like
printf "apt-get update" | at now + 2 minutes
somewhere where it is sure to be called close to the end of the boot
process.

I think the first solution is certainly the better one, though :-)

Regards

Michael

.-.. .. ...- .   .-.. --- -. --.   .- -. -..   .--. .-. --- ... .--. . .-.

There is a multi-legged creature crawling on your shoulder.
-- Spock, "A Taste of Armageddon", stardate 3193.9

apt-secure / apt-get update gpg signature invalid

[aRkadeFR]

Hello,

After setting up a new apt repository with aptly, signing the repository and 
adding the public gpg key to the apt keyring, I encounter a failure during the 
`apt update` command:
Err:3 http://#REPO_URL#/#NAME# #DISTRIBUTION# InRelease The following 
signatures were invalid: #KEY_ID# Hit:4 http://apt.postgresql.org/pub/repos/apt 
sid-pgdg InRelease Reading package lists... Done W: GPG error: 
http://#REPO_URL#/#NAME# #DISTRIBUTION# InRelease: The following signatures 
were invalid: #KEY_ID# E: The repository 'http://#REPO_URL#/#NAME# 
#DISTRIBUTION# InRelease' is not signed. N: Updating from such a repository 
can't be done securely, and is therefore disabled by default. N: See 
apt-secure(8) manpage for repository creation and user configuration details.

And yet the signature and the gpg keys are good. I succeed to verify the gpg 
signature on the InRelease file:

curl http://#REPO_URL#/InRelease | gpg --keyring /etc/apt/trusted.gpg --verify 
gpg: Signature made Wed 11 Jan 2017 04:01:23 PM CET gpg: using RSA key #KEY_ID# 
gpg: Good signature from "#DESCRIPTION_GPG_KEY#" [unknown] gpg: WARNING: This 
key is not certified with a trusted signature! gpg: There is no indication that 
the signature belongs to the owner. Primary key fingerprint: 
#GOOD_KEY_FINGERPRINT#

I also verified the Release and Release.gpg file and they seem correct to me.


I tried to find what's done during the apt update with a strace -o /tmp/strace 
-ff apt update then grep:

grep 'apt.*key' ./strace* ./strace.29829:execve("/usr/bin/apt-key", 
["/usr/bin/apt-key", "--quiet", "--readonly", "verify", "--status-fd", "3", 
"/tmp/apt.sig.ORUwxh", "/tmp/apt.data.kKXyrN"], [/* 28 vars */]) = 0 
./strace.29829:open("/usr/bin/apt-key", O_RDONLY) = 4 
./strace.29888:execve("/usr/bin/apt-key", ["/usr/bin/apt-key", "--quiet", 
"--readonly", "verify", "--status-fd", "3", "/tmp/apt.sig.utRWBD", 
"/tmp/apt.data.Fo1Lka"], [/* 28 vars */]) = 0 
./strace.29888:open("/usr/bin/apt-key", O_RDONLY) = 4 
./strace.29947:execve("/usr/bin/apt-key", ["/usr/bin/apt-key", "--quiet", 
"--readonly", "verify", "--status-fd", "3", "/tmp/apt.sig.ug6xiV", 
"/tmp/apt.data.Yv4zFs"], [/* 28 vars */]) = 0 
./strace.29947:open("/usr/bin/apt-key", O_RDONLY) = 4 
./strace.30006:execve("/usr/bin/apt-key", ["/usr/bin/apt-key", "--quiet", 
"--readonly", "verify", "--status-fd", "3", "/tmp/apt.sig.QSyrCg", 
"/tmp/apt.data.LK9DGO"], [/* 28 vars */]) = 0 
./strace.30006:open("/usr/bin/apt-key", O_RDONLY) = 4

How can I debug and fix this error?

Thanks

Re: apt-get is not following preferences.d

[Gene Heskett]

On Friday 13 January 2017 03:16:50 Matthias Bodenbinder wrote:

> Am 12.01.2017 um 19:43 schrieb Michael Lange:
> > Just a shot in the dark:
> > maybe the apt-get update at boot time is done before a network
> > connection has been established? I noticed that this can lead to the
> > exact behavior you describe when pinning is in use. Apparently a bug
> > in apt.
> >
> > Regards
> >
> > Michael
>
> Hello Michael,
>
> I gave it a try. I unplugged the network and did an apt-get update.
> This is throwing all the errors that the repos are not available. But
> in the end the next "apt-get dist-upgrade" indeed wants to update all
> packages to testing.
>
> So it seems that this is an issue with network not ready while apt-get
> update is being performed.
>
> How do I fix this? Where to look?
>
> And thank you for the hint, Michael.
> Matthias

An old geezers thoughts on this is that if I see any error fetching the 
lists when I do an apt update, or apt-get update, I consider the system 
frozen in place until such time as the update succeeds w/o any errors. 
And I'll for sure question this list if the errors persist to the next 
day.  Debian may have suffered a machine failure, and its replacement 
might take a day to configure, and possibly another day to get 
synchronized, and only then might I update my sources list. But in these 
times, there is a high likelyhood of a round-robin setup at the debian 
site, spreading the load to 2 or 3 more other machines. So quite often 
and update done immediately after a failed update, works fine.

We users appreciate that, very much.

Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 

Re: apt-get is not following preferences.d

[Matthias Bodenbinder]

Am 12.01.2017 um 19:43 schrieb Michael Lange:

Just a shot in the dark:
maybe the apt-get update at boot time is done before a network connection
has been established? I noticed that this can lead to the exact behavior
you describe when pinning is in use. Apparently a bug in apt.

Regards

Michael


Hello Michael,

I gave it a try. I unplugged the network and did an apt-get update. This 
is throwing all the errors that the repos are not available. But in the 
end the next "apt-get dist-upgrade" indeed wants to update all packages 
to testing.


So it seems that this is an issue with network not ready while apt-get 
update is being performed.


How do I fix this? Where to look?

And thank you for the hint, Michael.
Matthias