Problems with `pactl load-module module-loopback'
Hi all. Without pipewire I didn't manage to pair and connect my bluetooth headset/microphone to my Debian 12 so I installed pipewire while pulseaudio was already there. So now both pulseaudio and pipewire are installed. Now when I do: $ pactl load-module module-loopback latency_msec=5 a terrible noise suddenly comes, and if I want to stop it with $ pactl exit I get the error message `exit failure: connection refused'. I searched around but didn't find so far any solution. Please help whoever can. Thanks in advance, Rodolfo
Problems with `pactl' after replacing pulseaudio with pipewire
In order to have my headset bluetooth microphone detected by Debian 12 I removed pulseaudio and in its place installed pipewire. Only, since then, when I do $ pactl load-module module-loopback latency_msec=5 a terrible continuous noise comes up, and besides when I do $ pactl exit I get the error message `exit failure: connection refused'. I searched around but didn't find so far any solution. Please help whoever can. Thanks in advance, Rodolfo
Re: Fn keys not working in Debian 12 on Lenovo Thinkpad T450s
Nicolas George writes: > Rodolfo Medina (12024-01-11): >> As my machine has a dual boot with MS Windows, F2 and F3 keyboard keys work >> fine in Windows in lowering and increasing sound volume, and F1 for muting >> it etcetera F4, F5, F6..., but in Debian they don't seem to work. > > Hi. > > Try testing them with xev. Show what you get if you cannot read it. Thanks. Here's the whole output: Outer window is 0x221, inner window is 0x222 PropertyNotify event, serial 8, synthetic NO, window 0x221, atom 0x27 (WM_NAME), time 33946030, state PropertyNewValue PropertyNotify event, serial 9, synthetic NO, window 0x221, atom 0x22 (WM_COMMAND), time 33946030, state PropertyNewValue PropertyNotify event, serial 10, synthetic NO, window 0x221, atom 0x28 (WM_NORMAL_HINTS), time 33946030, state PropertyNewValue CreateNotify event, serial 11, synthetic NO, window 0x221, parent 0x221, window 0x222, (10,10), width 50, height 50 border_width 4, override NO PropertyNotify event, serial 14, synthetic NO, window 0x221, atom 0x167 (WM_PROTOCOLS), time 33946030, state PropertyNewValue MapNotify event, serial 15, synthetic NO, window 0x221, event 0x221, window 0x222, override NO PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x186 (_NET_WM_VISIBLE_NAME), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x188 (_NET_WM_VISIBLE_ICON_NAME), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x1c1 (_OB_APP_ROLE), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x1c3 (_OB_APP_NAME), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x1c4 (_OB_APP_CLASS), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x1c5 (_OB_APP_GROUP_NAME), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x1c6 (_OB_APP_GROUP_CLASS), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x1c2 (_OB_APP_TITLE), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x1c7 (_OB_APP_TYPE), time 33946031, state PropertyNewValue PropertyNotify event, serial 18, synthetic NO, window 0x221, atom 0x18e (_NET_WM_ICON), time 33946031, state PropertyNewValue ReparentNotify event, serial 18, synthetic NO, window 0x221, event 0x221, window 0x221, parent 0x40169d, (0,0), override NO PropertyNotify event, serial 21, synthetic NO, window 0x221, atom 0x18b (_NET_WM_STATE), time 33946031, state PropertyNewValue ConfigureNotify event, serial 21, synthetic NO, window 0x221, event 0x221, window 0x221, (0,0), width 178, height 178, border_width 0, above 0x4016e9, override NO ConfigureNotify event, serial 21, synthetic NO, window 0x221, event 0x221, window 0x221, (1,22), width 178, height 178, border_width 0, above 0x4016e9, override NO PropertyNotify event, serial 21, synthetic NO, window 0x221, atom 0x195 (_NET_FRAME_EXTENTS), time 33946031, state PropertyNewValue PropertyNotify event, serial 21, synthetic NO, window 0x221, atom 0x194 (_KDE_NET_WM_FRAME_STRUT), time 33946031, state PropertyNewValue PropertyNotify event, serial 22, synthetic NO, window 0x221, atom 0x191 (_NET_WM_ALLOWED_ACTIONS), time 33946031, state PropertyNewValue ConfigureNotify event, serial 22, synthetic YES, window 0x221, event 0x221, window 0x221, (1045,20), width 178, height 178, border_width 2, above 0x0, override NO PropertyNotify event, serial 22, synthetic NO, window 0x221, atom 0x189 (_NET_WM_DESKTOP), time 33946032, state PropertyNewValue MapNotify event, serial 39, synthetic NO, window 0x221, event 0x221, window 0x221, override NO VisibilityNotify event, serial 39, synthetic NO, window 0x221, state VisibilityFullyObscured PropertyNotify event, serial 39, synthetic NO, window 0x221, atom 0x168 (WM_STATE), time 33946033, state PropertyNewValue VisibilityNotify event, serial 39, synthetic NO, window 0x221, state VisibilityUnobscured Expose event, serial 39, synthetic NO, window 0x221, (0,0), width 178, height 10, count 3 Expose event, serial 39, synthetic NO, window 0x221, (0,10), width 10, height 58, count 2 Expose event, serial 39, synthetic NO, window 0x221, (68,10), width 110, height 58, count 1 Expose event, serial 39, synthetic NO, window 0x221, (0,68), width 178, height 110, count 0 FocusIn event, serial 40, synthetic NO, window 0x221, mode Not
Re: Fn keys not working in Debian 12 on Lenovo Thinkpad T450s
writes: > On Thu, Jan 11, 2024 at 08:53:46AM +0000, Rodolfo Medina wrote: >> As my machine has a dual boot with MS Windows, F2 and F3 keyboard keys work >> fine in Windows in lowering and increasing sound volume, and F1 for muting it >> etcetera F4, F5, F6..., but in Debian they don't seem to work. > > "In Debian" is a wide land :-) It's Bookworm with Openbox. > OT1H... > > A week ago I installed Debian's Bookworm with MATE on a friend's computer > (Thinkpad x270) and the loudness keys worked out of the box. > > OTOH... > > Myself -- I have no desktop environment (fvwm on X, *no* systemd, *no* > DBUS, so that would count as "exotic guy"). > > On my laptop (a Thinkpad x230) the background brightness wasn't working > (I don't know about the loudness things, since I never needed/used them). > > Therefore I decided to catch ACPI events and set up this: > > --- --- > tomas@trotzki:~$ cat /etc/acpi/events/briteup > > event=video/brightnessup > action=/etc/acpi/actions/brite "%e" > --- --- > tomas@trotzki:~$ cat /etc/acpi/events/britedn > > event=video/brightnessdown > action=/etc/acpi/actions/brite "%e" > --- --- > tomas@trotzki:~$ cat /etc/acpi/actions/brite > > #!/bin/sh > logger "[ACPI] $@" > BASE="/sys/class/backlight/intel_backlight" > CURR=$(cat "$BASE/brightness") > MAX=$(cat "$BASE/max_brightness") > # MIN is some arbitrary "low" value. Note that for values > # of MIN below 6 (more precisely: 2/11 for our factor), the > # thing gets stuck at the low end: (13 * x) / 11 == x, > # in integer arithmetic, for x <= 5. > # > # The "exponential" algorithm is a bit long at the low > # end. We might consider stretching there. Or increasing > # MIN. > > MIN=20 > if [ "$CURR" -lt "$MIN" ] ; then CURR="$MIN" ; fi > > # NOTE: 11/13 is approx the fourth root of 1/2: > # i.e. four steps are a doubling/halving > # of brightness (constant steps gave too > # coarse jumps in the low range) > > case $1 in > video/brightnessdown* ) > NEW=$(( (11 * CURR) / 13 )) > ;; > video/brightnessup* ) > NEW=$(( (13 * CURR) / 11 )) > ;; > * ) > exit 0 > ;; > esac > > if [ "$NEW" -lt "$MIN" ] ; then NEW="$MIN" ; fi > if [ "$NEW" -gt "$MAX" ] ; then NEW="$MAX" ; fi > logger "[ACPI] brightness $CURR --> $NEW" > echo "$NEW" > $BASE/brightness > --- --- > > (The charm of using ACPI is that it works independently of X). > > To find which events to wait on, just run acpi_listen on a > terminal and hit your dream's key. Following your example, I aptitude-installed acpid and created /etc/apt/events/briteup and /etc/acpi/actions/brite and filled them with the stuff you reported; and then I did `chmod +x brite'... Then? Thanks, Rodolfo
Re: Fn keys not working in Debian 12 on Lenovo Thinkpad T450s
Rodolfo Medina writes: > As my machine has a dual boot with MS Windows, F2 and F3 keyboard keys work > fine in Windows in lowering and increasing sound volume, and F1 for muting it > etcetera F4, F5, F6..., but in Debian they don't seem to work. Sorry, I forgot to say that Openbox is my graphical environment. Thanks, Rodolfo
Fn keys not working in Debian 12 on Lenovo Thinkpad T450s
As my machine has a dual boot with MS Windows, F2 and F3 keyboard keys work fine in Windows in lowering and increasing sound volume, and F1 for muting it etcetera F4, F5, F6..., but in Debian they don't seem to work. Please help who can, thanks in advance. Rodolfo
Re: Temporary failure in name resolution
Greg Wooledge writes: > On Wed, Jan 10, 2024 at 06:34:53PM +0000, Rodolfo Medina wrote: >> writes: >> > Where/how does this error message "appear"? >> >> As an output of the `startx' command. > > It would be lovely to see the *entire* error message, in case some part > of it identifies the program that produced the error. Many messages do. /etc/resolv.conf is there again (the system created it) but the error message does not seem to occur any more. Even if it occurred again, I have no way to fetch it, cause it appears (it used to) at login. > Failing that, let's go out on a limb and guess that it's *your own* > hostname that can't be resolved. > > What is the output of the "hostname" command? It's: `thinkpad'. > What is the output of "grep -F $(hostname) /etc/hosts"? It's: 127.0.1.1 caterina-thinkpad.home caterina-thinkpad > What is the output of "grep hosts /etc/nsswitch.conf"? It's: hosts: files mdns4_minimal [NOTFOUND=return] dns - Rodolfo
Re: Temporary failure in name resolution
writes: > On Wed, Jan 10, 2024 at 06:13:55PM +0000, Rodolfo Medina wrote: >> Debian 12 on Thinkpad T450s. >> >> The error message `Temporary failure in name resolution' appears whenever I >> log into X with `startx' at prompt after boot, but it *only* occurs if the >> PC is *not* connected to internet; otherwise it does not appear; >> nevertheless, it annoys me and I wish to get rid of it. Any suggestions? > > Where/how does this error message "appear"? As an output of the `startx' command. > Obviously, "something" is trying to resolve a host name and is unable to. > Depending on which host name "it" is trying to resolve, that might be > reasonable (i.e. if that host is "out there") or not. > > So let's try finding out what this "something" is... The problem seems to be solved after I removed the file /etc/resolv.conf, that included a certain nameserver... Thanks, Rodolfo
Temporary failure in name resolution
Debian 12 on Thinkpad T450s. The error message `Temporary failure in name resolution' appears whenever I log into X with `startx' at prompt after boot, but it *only* occurs if the PC is *not* connected to internet; otherwise it does not appear; nevertheless, it annoys me and I wish to get rid of it. Any suggestions? Thanks, Rodolfo
Re: Please help with not booting from USB so to install Debian
Rodolfo Medina writes: > Rodolfo Medina writes: > >> I want to install Debian on a new machine but don't manage to boot from USB >> stick. (I can do so regularly with another machine, so the USB stick is ok >> and so is the Debian netinst I burned onto it.) At the boot I press F9 and >> a menu appears where I can choose to boot from USB stick; but then it >> doesn't so at all booting instead into Windows 11. In BIOS I enabled the >> CSM protocol but nothing. Please help as I don't know what to do: thanks. > > > Now I tried with a CDROM instead of a USB stick but the problem remains. ...And now I tried even with an MS Windows 10 installation CDROM but the problem remains! Rodolfo
Re: Please help with not booting from USB so to install Debian
Rodolfo Medina writes: > I want to install Debian on a new machine but don't manage to boot from USB > stick. (I can do so regularly with another machine, so the USB stick is ok > and so is the Debian netinst I burned onto it.) At the boot I press F9 and a > menu appears where I can choose to boot from USB stick; but then it doesn't > so at all booting instead into Windows 11. In BIOS I enabled the CSM > protocol but nothing. Please help as I don't know what to do: thanks. Now I tried with a CDROM instead of a USB stick but the problem remains. Rodolfo
Re: Please help with not booting from USB so to install Debian
Bret Busby writes: > If you go to > > https://lists.ubuntu.com/archives/ubuntu-users/2022-July/thread.html > > and scroll down to the thread starting with the subject "Questions about > Linux Mint and this list", read that message, and, work your way through the > responses, especially, the ones from Liam Proven, you should be able to get > the answer that you seek. Thanks, but it is of no help, I'm afraid... Rodolfo
Re: Please help with not booting from USB so to install Debian
"Thomas Schmitt" writes: > I understand from the link that it has a 64 bit Celeron J4105 CPU. > So its EFI would want an "amd64" ISO. > > [...] > > You could try with > > https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-11.7.0-amd64-netinst.iso > and CSM disabled. Unfortunately, it won't boot either... Rodolfo
Re: Please help with not booting from USB so to install Debian
David Christensen writes: > On 6/8/23 11:36, Rodolfo Medina wrote: >> I want to install Debian on a new machine but don't manage to boot from USB >> stick. (I can do so regularly with another machine, so the USB stick is ok >> and >> so is the Debian netinst I burned onto it.) At the boot I press F9 and a >> menu >> appears where I can choose to boot from USB stick; but then it doesn't so at >> all >> booting instead into Windows 11. In BIOS I enabled the CSM protocol but >> nothing. Please help as I don't know what to do: thanks. > > On 6/8/23 13:01, Rodolfo Medina wrote: >> > > https://www.amazon.it/KUU-Notebook-Prozessor-Bluetooth-portatile/dp/B0C4TGXKBC/ref=sr_1_2_sspa?crid=3PK1MW55MAOA > > > Do you want Windows/Debian dual-boot, or Debian only? At least one of the two. What I don't want is MS Windows only... ;-) Rodolfo
Re: Please help with not booting from USB so to install Debian
Bret Busby writes: > My understanding is that Windows 11 computers have malware that is designed > to prevent booting into anything other than the malicious Windows 11. > > A procedure to get around the Windows 11 malware, and to be able to boot into > Linux, has, I believe, been described on the Ubuntu Users mailing list. Can you perhaps point out a link to read that procedure? Thanks! Rodolfo
Re: Please help with not booting from USB so to install Debian
Thank you Andrew and Charles. "Andrew M.A. Cater" writes: > What model of machine is this - and how new? Here it is: https://www.amazon.it/KUU-Notebook-Prozessor-Bluetooth-portatile/dp/B0C4TGXKBC/ref=sr_1_2_sspa?crid=3PK1MW55MAOA > How did you write the image to the USB stick? This way: $ dd if=debian-11.7.0-i386-netinst.iso of=/dev/sdd bs=4M; sync As I said, another machine of mine boots regularly into it, so it must be ok. > CSM is probably not needed. USB boot *should* work but there is a > way of forcing boot only to Windows 11 in some machines. (I had this > on a relatively new T490). > > Does it show any messages? No message: it simply boots into Windows instead of the USB drive that I chose in the menu. Thanks, Rodolfo
Please help with not booting from USB so to install Debian
I want to install Debian on a new machine but don't manage to boot from USB stick. (I can do so regularly with another machine, so the USB stick is ok and so is the Debian netinst I burned onto it.) At the boot I press F9 and a menu appears where I can choose to boot from USB stick; but then it doesn't so at all booting instead into Windows 11. In BIOS I enabled the CSM protocol but nothing. Please help as I don't know what to do: thanks. Rodolfo
Re: Printer not working after upgrading
Rodolfo Medina writes: > I noticed the problem just after upgrading to bullseye from previous stable > Debian version; then I upgraded to Unstable in the hope of solving it but the > problem remains, with error: > > stopped "Filter failed" > > I also tried to remove and re-add the printer with no success. I'm stuck, > please help, thanks in advance. Peter von Kaehne writes: > To help I think people need more than you have given. Printer model, software > in use, version, printer driver, logs. Brad Rogers writes: > Hello Rodolfo, > > Same sort of thing Celejar said about your gv issues; What printer, > what driver, what were the exact commands and error messages... Thanks, sorry: the printer is the Samsung ML-191x 252x Series, the software I'm using to manage it is the Debian package cups and `aptitude show' says it's installed in my Sid box at the version 2.4.2-1+b2. The driver I think is the file called ML-191xspl2.ppd. I do: $ lp -P 1 ing.pdf and the output: request id is Samsung_ML-191x_252x_Series-694 (1 file(s)) and nothing happens. In the "Jobs" section of the printing localhost it says stopped "Filter failed" I hope it's all right. Logs I wouldn't know... Thanks, Rodolfo
Printer not working after upgrading
I noticed the problem just after upgrading to bullseye from previous stable Debian version; then I upgraded to Unstable in the hope of solving it but the problem remains, with error: stopped "Filter failed" I also tried to remove and re-add the printer with no success. I'm stuck, please help, thanks in advance. Rodolfo
Re: Problems with gv after upgrade
Charles Curley writes: > On Mon, 21 Nov 2022 16:40:53 + > Rodolfo Medina wrote: > >> My PS file is regularly read by evince, simply with >> >> $ evince file.ps >> >> Instead, with gv, as I always did before: >> >> $ gv file.ps >> >> the application starts but the file won't open > > Not enough. Show us *exactly* what you typed and the results. > Paths, if any, and all. Everything. Start with the command prompt, and > copy and paste to the next command prompt. > > E.g.: > > charles@hawk:~$ gv > /home/charles/versioned/bare.metal/Linux-Complete-Backup-and-Recovery-HOWTO.ps > & [1] 862194 charles@hawk:~$ [1]+ Done gv > /home/charles/versioned/bare.metal/Linux-Complete-Backup-and-Recovery-HOWTO.ps > charles@hawk:~$ > > And then report what you saw. In this case, I saw the document opened > in gv, and saw no errors in it. Thanks. But before I go on, it seems to be a known bug: https://bugs.debian.org/cgi-bin/pkgreport.cgi?pkg=gv;dist=unstable Can we hope it will be soon fixed? (It also seems that the last gv release is from 2013) Rodolfo
Re: Problems with gv after upgrade
Celejar writes: > On Mon, 21 Nov 2022 09:06:16 + > Rodolfo Medina wrote: > >> After upgrading to Unstable, gv does not read my PS files any more. I >> couldn't >> find any help in Internet. Please help, thanks in advance. > > You can do better than this - what command did you use? What error did > you get? My PS file is regularly read by evince, simply with $ evince file.ps Instead, with gv, as I always did before: $ gv file.ps the application starts but the file won't open: the same with $ flpsed file.ps Either the printer won't work since upgrading: is it related? Thanks, Rodolfo
Problems with gv after upgrade
Hi all. After upgrading to Unstable, gv does not read my PS files any more. I couldn't find any help in Internet. Please help, thanks in advance. Rodolfo
[solved] `wget' web site
>> On Sun, Sep 26, 2021 at 5:18 AM Rodolfo Medina >> wrote: >> > >> > Hi all. >> > >> > I manage to download an entire website, say www.mysite.com, with simply >> > >> > $ wget -r -l 0 www.mysite.com >> > >> > After that, I can surf that web site offline with all its internal links. >> > Perfect. >> > >> > Now the problem comes when I want to copy that stuff into my Android tablet >> > and >> > read it offline too. Then the links do not work any more. >> > >> > Any suggestions? The solution I found is all within Android operating system and is called OffLine Browser. I'm still testing it, but it seems to work fine in both downloading a whole web site and then, offline, properly surf it with all its links. Thanks for your help, Rodolfo
Re: `wget' web site
>> On Sun, Sep 26, 2021 at 5:18 AM Rodolfo Medina >> wrote: >> > >> > Hi all. >> > >> > I manage to download an entire website, say www.mysite.com, with simply >> > >> > $ wget -r -l 0 www.mysite.com >> > >> > After that, I can surf that web site offline with all its internal links. >> > Perfect. >> > >> > Now the problem comes when I want to copy that stuff into my Android >> > tablet and read it offline too. Then the links do not work any more. >> > >> > Any suggestions? The solution I found is all within Android operating system and is called OffLine Browser. I'm still testing it, but it seems to work fine in both downloading a whole web site and then, offline, properly surf it with all its links. Thanks for your help, Rodolfo
`wget' web site
Hi all. I manage to download an entire website, say www.mysite.com, with simply $ wget -r -l 0 www.mysite.com After that, I can surf that web site offline with all its internal links. Perfect. Now the problem comes when I want to copy that stuff into my Android tablet and read it offline too. Then the links do not work any more. Any suggestions? Thanks for any help, Rodolfo
`aptitude update' won't update
Please help with this: # aptitude update Hit http://dl.google.com/linux/chrome/deb stable InRelease Get: 1 http://ftp.debian.org/debian stable InRelease [113 kB] Get: 2 http://ftp.uk.debian.org/debian stable InRelease [113 kB] E: Repository 'http://ftp.debian.org/debian stable InRelease' changed its 'Codename' value from 'buster' to 'bullseye' E: Repository 'http://ftp.uk.debian.org/debian stable InRelease' changed its 'Codename' value from 'buster' to 'bullseye' E: Failed to download some files W: Failed to fetch http://ftp.uk.debian.org/debian/dists/stable/InRelease: W: Failed to fetch http://ftp.debian.org/debian/dists/stable/InRelease: E: Some index files failed to download. They have been ignored, or old ones used instead. My /etc/apt/sources.list: deb http://ftp.uk.debian.org/debian/ stable main deb-src http://ftp.uk.debian.org/debian/ stable main # non-free deb http://ftp.debian.org/debian/ stable main contrib non-free #deb http://repository.spotify.com stable non-free #deb [arch=amd64] https://repo.skype.com/deb stable main Thanks in advance for any help... Rodolfo
Re: Fones com microfone embutido
Sobre por vezes não funciona, no meu caso eu sempre alterno no mínimo duas vezes antes de usar, porque quando alterno somente uma vez não funciona na maioria dos casos, então faço umas duas vezes no mínimo, hehehehe, outra gambiarra :) Em qua., 21 de jul. de 2021 às 12:05, Diego Rabatone Oliveira < dir...@diraol.eng.br> escreveu: > Provavelmente você alterna entre o modo HSP/HFP (Headset Unit) e A2DP Sink > (High Fidelity Playback). > > O modo HSP/HFP fica super chiado mesmo (e por vezes nem funciona aqui na > real) > > > Diego Rabatone Oliveira > > Em qua., 21 de jul. de 2021 às 12:36, Rodolfo > escreveu: > >> No meu debian 10 funciona meu fone bluetooth e o microfone também. Agora >> assim, foram 2 meses tentando fazer funcionar, nem pergunte como fiz porque >> não lembro, mexi no S.O todo, hehehehe >> >> E ainda funciona com ressalvas, eu tenho que desabilitar e habilitar um >> modo no soundsettings do XFCE pra funcionar, se eu quiser usar o microfone >> tenho que deixar habilitado uma opção, que funciona o microfone mas o áudio >> fica com xiados(mas dá pra trabalhar), se eu quiser o áudio perfeito >> preciso mudar a opção, mas aí o microfone não funciona. Enfim, é chato mas >> consegui e uso até hoje. >> >> Só digo boa sorte, porque eu pesquisei até nas listas dos kernels sobre o >> assunto, muita gente passa por esse problema, sinto muito por não ter >> registrado um passo a passo do que fiz. >> >> Att. >> >> Em qua., 21 de jul. de 2021 às 11:31, Diego Rabatone Oliveira < >> dir...@diraol.eng.br> escreveu: >> >>> Cara, eu super recomendo evitar usar o fone de ouvido de fones >>> bluetooth. A qualidade é sempre ruim e, em especial com Linux, geralmente >>> dá muita dor de cabeça para fazer funcionar, quando funciona. >>> >>> Eu simplesmente desisti ... rs >>> >>> Com relação aos demais, via cabo, minha sugestão é usar o "pavucontrol" >>> como interface para gerenciar entradas e saídas de áudio. >>> Na minha modesta opinião é a melhor interface para isso disparado. >>> >>> >>> Diego Rabatone Oliveira >>> >>> Em qua., 21 de jul. de 2021 às 08:31, riesdra >>> escreveu: >>> >>>> Olá, estou usando debian sid com xfce, e venho tendo problemas com >>>> fones que tem microfone embutido. >>>> >>>> Tenho um bluetooth que não consegui fazer funcionar o microfone dele, e >>>> dois com fio que também não estou conseguindo usar microfone deles. >>>> Todos eles funcionam normalmente no celular com android, faço chamadas >>>> e recebo usando eles normalmente. >>>> >>>> E se usar estes fones que vem com celular "in ear" funciona normalmente >>>> no notebook, alguém sabe o que pode ser, achei que poderia ser os fones, >>>> mas eles funcionaram normalmente no celular. >>>> >>>> obs:- Todos fones com fio são fone e microfone em cabo único, não é de >>>> duas saídas. >>>> >>>> desde já agradeço a atenção de todos. >>>> >>>> -- >>>> >>>> >>>> >>>> *Ricardo Libanio* >>>> >>>>
Re: Fones com microfone embutido
É exatamente isso mesmo que faço, k. Gambiarra das brabas :) Em qua., 21 de jul. de 2021 às 12:05, Diego Rabatone Oliveira < dir...@diraol.eng.br> escreveu: > Provavelmente você alterna entre o modo HSP/HFP (Headset Unit) e A2DP Sink > (High Fidelity Playback). > > O modo HSP/HFP fica super chiado mesmo (e por vezes nem funciona aqui na > real) > > > Diego Rabatone Oliveira > > Em qua., 21 de jul. de 2021 às 12:36, Rodolfo > escreveu: > >> No meu debian 10 funciona meu fone bluetooth e o microfone também. Agora >> assim, foram 2 meses tentando fazer funcionar, nem pergunte como fiz porque >> não lembro, mexi no S.O todo, hehehehe >> >> E ainda funciona com ressalvas, eu tenho que desabilitar e habilitar um >> modo no soundsettings do XFCE pra funcionar, se eu quiser usar o microfone >> tenho que deixar habilitado uma opção, que funciona o microfone mas o áudio >> fica com xiados(mas dá pra trabalhar), se eu quiser o áudio perfeito >> preciso mudar a opção, mas aí o microfone não funciona. Enfim, é chato mas >> consegui e uso até hoje. >> >> Só digo boa sorte, porque eu pesquisei até nas listas dos kernels sobre o >> assunto, muita gente passa por esse problema, sinto muito por não ter >> registrado um passo a passo do que fiz. >> >> Att. >> >> Em qua., 21 de jul. de 2021 às 11:31, Diego Rabatone Oliveira < >> dir...@diraol.eng.br> escreveu: >> >>> Cara, eu super recomendo evitar usar o fone de ouvido de fones >>> bluetooth. A qualidade é sempre ruim e, em especial com Linux, geralmente >>> dá muita dor de cabeça para fazer funcionar, quando funciona. >>> >>> Eu simplesmente desisti ... rs >>> >>> Com relação aos demais, via cabo, minha sugestão é usar o "pavucontrol" >>> como interface para gerenciar entradas e saídas de áudio. >>> Na minha modesta opinião é a melhor interface para isso disparado. >>> >>> >>> Diego Rabatone Oliveira >>> >>> Em qua., 21 de jul. de 2021 às 08:31, riesdra >>> escreveu: >>> >>>> Olá, estou usando debian sid com xfce, e venho tendo problemas com >>>> fones que tem microfone embutido. >>>> >>>> Tenho um bluetooth que não consegui fazer funcionar o microfone dele, e >>>> dois com fio que também não estou conseguindo usar microfone deles. >>>> Todos eles funcionam normalmente no celular com android, faço chamadas >>>> e recebo usando eles normalmente. >>>> >>>> E se usar estes fones que vem com celular "in ear" funciona normalmente >>>> no notebook, alguém sabe o que pode ser, achei que poderia ser os fones, >>>> mas eles funcionaram normalmente no celular. >>>> >>>> obs:- Todos fones com fio são fone e microfone em cabo único, não é de >>>> duas saídas. >>>> >>>> desde já agradeço a atenção de todos. >>>> >>>> -- >>>> >>>> >>>> >>>> *Ricardo Libanio* >>>> >>>>
Re: Fones com microfone embutido
No meu debian 10 funciona meu fone bluetooth e o microfone também. Agora assim, foram 2 meses tentando fazer funcionar, nem pergunte como fiz porque não lembro, mexi no S.O todo, hehehehe E ainda funciona com ressalvas, eu tenho que desabilitar e habilitar um modo no soundsettings do XFCE pra funcionar, se eu quiser usar o microfone tenho que deixar habilitado uma opção, que funciona o microfone mas o áudio fica com xiados(mas dá pra trabalhar), se eu quiser o áudio perfeito preciso mudar a opção, mas aí o microfone não funciona. Enfim, é chato mas consegui e uso até hoje. Só digo boa sorte, porque eu pesquisei até nas listas dos kernels sobre o assunto, muita gente passa por esse problema, sinto muito por não ter registrado um passo a passo do que fiz. Att. Em qua., 21 de jul. de 2021 às 11:31, Diego Rabatone Oliveira < dir...@diraol.eng.br> escreveu: > Cara, eu super recomendo evitar usar o fone de ouvido de fones bluetooth. > A qualidade é sempre ruim e, em especial com Linux, geralmente dá muita dor > de cabeça para fazer funcionar, quando funciona. > > Eu simplesmente desisti ... rs > > Com relação aos demais, via cabo, minha sugestão é usar o "pavucontrol" > como interface para gerenciar entradas e saídas de áudio. > Na minha modesta opinião é a melhor interface para isso disparado. > > > Diego Rabatone Oliveira > > Em qua., 21 de jul. de 2021 às 08:31, riesdra escreveu: > >> Olá, estou usando debian sid com xfce, e venho tendo problemas com fones >> que tem microfone embutido. >> >> Tenho um bluetooth que não consegui fazer funcionar o microfone dele, e >> dois com fio que também não estou conseguindo usar microfone deles. >> Todos eles funcionam normalmente no celular com android, faço chamadas e >> recebo usando eles normalmente. >> >> E se usar estes fones que vem com celular "in ear" funciona normalmente >> no notebook, alguém sabe o que pode ser, achei que poderia ser os fones, >> mas eles funcionaram normalmente no celular. >> >> obs:- Todos fones com fio são fone e microfone em cabo único, não é de >> duas saídas. >> >> desde já agradeço a atenção de todos. >> >> -- >> >> >> >> *Ricardo Libanio* >> >>
Re: Piano live recording
David writes:
> On Tue, 4 May 2021 at 18:17, Rodolfo Medina wrote:
>
>> I've just bought a Behringer UMC404HD audio interface and want to record
>> live piano by placing two microphones one at the trebles and one at the
>> bass. Is it better to use mono or omni directional microphones? In
>> particular, which do you suggest between Bheringer B5 either Behringer C2
>> twins?
>
> Hi. Even though this list is extraordinarily helpful, please don't have
> conversations here that are entirely unrelated to Debian.
>
> You could ask questions about microphone technique on
> linux-audio-u...@lists.linuxaudio.org
> which is also very helpful with many knowledgeable readers responding.
>
> And I see you were active on that list recently, so perhaps you accidentally
> sent this question to the wrong list?
Thanks. 4 years ago I started the present conversation ("Live recording") and
listers suggested me to get an audio interface. Now I bought one and resumed
the conversation. For the particular problem of "multichannel playback" some
listers here suggested me to apply linux.audio.users mailing list.
Cheers,
Rodolfo
Re: Piano live recording
"Jeremy Nicoll" writes: > On Tue, 4 May 2021, at 09:16, Rodolfo Medina wrote: >> >> Is it better to use mono or omni directional microphones? > > Omni-directional mics are also mono, usually. Thanks, Jeremy... I meant `monodirectional or omnidirectional...?' Rodolfo
Re: Piano live recording
Weaver writes: > On 04-05-2021 18:16, Rodolfo Medina wrote: >> I've just bought a Behringer UMC404HD audio interface and want to record >> live piano by placing two microphones one at the trebles and one at the >> bass. Is it better to use mono or omni directional microphones? In >> particular, which do you suggest between Bheringer B5 either Behringer C2 >> twins? > > Upright or grand? Upright. Thanks... Rodolfo
Piano live recording (was: Live recording)
Hi all. I've just bought a Behringer UMC404HD audio interface and want to record live piano by placing two microphones one at the trebles and one at the bass. Is it better to use mono or omni directional microphones? In particular, which do you suggest between Bheringer B5 either Behringer C2 twins? Thanks for any help, Rodolfo
Re: [solved!!!] Multichannel audio playback
Rodolfo Medina writes: > Rodolfo Medina writes: > > On Mon, Mar 05, 2018 at 10:39:19AM +0100, Rodolfo Medina wrote: > >>>> After learning, some months ago, thanks to listers' help, how to live >>>> record into a multi channel audio file, I was wondering about the reverse >>>> problem: now I have my multi channel audio file, e.g. composed by three >>>> different channels. Is it possibile (I guess it is), and how?, to send >>>> each of the three outputs into a different loud speaker and so listen to >>>> the song...? >> >> >> Four years ago this interesting thread. Now I've purchased a Behringer >> UMC404HD 4-channels audio interface and finally want to do my experiment. >> Now I have a 3-channel .wav file and 3 loudspeakers connected to Behringer's >> output: I want to playback each channel to a different speaker. > > > It works...!!! > > That's what I did: > > [...] > Do you think the same purpose could be achieved as well with a simple device like this: https://www.amazon.it/5-1-audio-converter-coassiale-5-1-canali-analogica/dp/B00NAJ4W2A/ref=asc_df_B00NAJ4W2A/?tag=googshopit-21=df0=459193775235==g=11263557217000104253c===1008560=pla-926912233897=1 Thanks, Rodolfo
Re: Multichannel audio playback
David Wright writes: > In terms of this computer, all those input and output sockets are the > equivalent of my little 3.5mm jacks (but with phantom power), and the gain > knobs are alsamixer sliders. > > [...] > > And so, by the sounds of the OP's solution post, the only functionality of > the Behringer being used is the four better quality DACs (rather than my > two), with four balanced outputs (rather than my two unbalanced ones through > a 3.5mm jack). > > [...] > > Would it help to see what kind of difference there is between a > sophisticated card like the Behringer and a run-of-the-mill soundcard, by > listing the ALSA Controls with amixer -c 2 scontents as I asked about > earlier? Thanks, David. What is specifically your audio set, much simpler as you say? I'm also interested in what you are wondering... about possibly having the same functionalities with much a simpler arrangement... Rodolfo
[solved!!!] Multichannel audio playback
Rodolfo Medina writes: On Mon, Mar 05, 2018 at 10:39:19AM +0100, Rodolfo Medina wrote: >>> After learning, some months ago, thanks to listers' help, how to live >>> record into a multi channel audio file, I was wondering about the reverse >>> problem: now I have my multi channel audio file, e.g. composed by three >>> different channels. Is it possibile (I guess it is), and how?, to send >>> each of the three outputs into a different loud speaker and so listen to >>> the song...? > > > Four years ago this interesting thread. Now I've purchased a Behringer > UMC404HD 4-channels audio interface and finally want to do my experiment. > Now I have a 3-channel .wav file and 3 loudspeakers connected to Behringer's > output: I want to playback each channel to a different speaker. It works...!!! That's what I did: 1) I plugged the Behringer into the mains; 2) I connected the Behringer to the PC via Behringer's USB cable; 3) I plugged 3 amplified loudspeaker (could also be not amplified but then sound is low) into 3 of the 4 black holes (the TRS ones, but it could be ok also with the RCA ones, I didn't try yet) of the `PLAYBACK OUTPUTS' system on the back of the Behringer; 4) from my Linux box I did: $ ecasound -f:16,3,44100 -i:sndfile,3canali.wav -o alsaplugin,2,0 where `3canali.wav' is a 3-channels file. And voilà: each of the 3 loudspeakers play a different channel of the 3 channels composing `3canali.wav'. There don't seem to be any issue with Behringer's controls: the `MAIN OUT' and `MIX' knobs can be whatever, such as the `STEREO/MONO' switch (so it seems). Thanks to each and all that helped...! Cheers Rodolfo
Re: Multichannel audio playback
didier gaumet writes: > Did you adjust the volume of output 3 and 4 in alsa? if you are lucky, the > routing is correct and these outputs are only muted. > > But I think (no pun intended) that in your present case, you need to learn > about: - mixing and mastering (partcularly routing) - particular abilites or > limitations of your Behringer interface - linux low-level tools if that is > what you want to use That's why I suggested you to use GUI tools, because, > while perhaps sometimes bloated or in certains cases not offering certains > options that a CLI tool proposes sometimes, GUI tools are more intuitive. And > it's easier to learn only mixing/mastering than mixing/mastering and linux > audio internals at the same time. > > As a starting point a tutorial about audio routing could be of use to > activate outputs 3&4 and chose what to feed them in (sorry if this is not a > correct sentence, I'm french). There is the routing chapter of Ardour > tutorial: > http://brunoruviaro.github.io/ardour4-tutorial/understanding-routing/ but the > whole tutorial could be of interest Yes, thanks, it is necessary to learn, beacuse noone replied who already did it or knows exactly how to do it. Actually I don't even know if that's ever possible with Behringer or with any other device... Rodolfo
Re: Multichannel audio playback
Joel Roth writes: >> So we could consider problem 1) solved. >> >> Let's try to go to problem 2). The above command properly sends channel 1 >> to loudspeaker 1 and channel 2 to loudspeaker 2, but it doesn't manage to >> send channel 3 into loudspeaker 3. Actually, the Behringer seems to behave >> in stereo mode. But the strange thing is that outputs `B' (i.e. 3 and 4) do >> not work at all and seems to be dead. So please help: how can I - if ever >> possible - send channel 3 to loudspeaker 3? And, more in general: is it >> possible, even with some other device, to achive what I want? > > The soundcard capabilities that linux sees are documented > in the /proc/asound filesystem. That's worth investigating. Here's the output: $ cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xfea64000 irq 38 1 [Generic]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfea6 irq 16 2 [U192k ]: USB-Audio - UMC404HD 192k BEHRINGER UMC404HD 192k at usb-:00:12.0-1.2, high speed It does not help me... > Here's one reference to what you can find there: > > https://www.ti.com/lit/an/sprac10/sprac10.pdf > > Another helpful source for guidance would be the Linux Audio > Users mailing list, with many knowledgeable and helpful > members. Yes, I wrote to it before buying the Behringer and I will again now. Some lister was unkind and called me ignorant... ;-) Rodolfo
Re: Multichannel audio playback
Joel Roth writes: > I don't think there is a problem with ecasound. > For comparison, you can try > > aplay -D test.wav > > You get the device name from aplay -L. > Please also show the output from > > cat /proc/asound/cards > > With your ecasound examples, the -a argument is not necessary, and > selecting channels is not its purpose. Now it works: $ ecasound -a:1,2,3 -i:sndfile,3canali.wav -o alsaplugin,2,0 ** *ecasound v2.9.1 (C) 1997-2014 Kai Vehmanen and others ** (eca-chainsetup) Chainsetup "untitled-chainsetup" (eca-chainsetup) NOTE: Real-time configuration, but insufficient privileges ... to utilize real-time scheduling (SCHED_FIFO). With small buffersizes, ... this may cause audible glitches during processing. (eca-chainsetup) "rt" buffering mode selected. (audioio_sndfile) Using libsndfile to open file "3canali.wav" for reading. (eca-chainsetup) NOTE: using existing audio parameters -f:s16_le,3,48000 ... for object 'sndfile' (tried to open with -f:s16_le,2,44100). (eca-chainsetup) Opened input "sndfile", mode "read". Format: s16_le, ... channels 3, srate 48000, interleaved (locked params). (eca-chainsetup) Opened output "alsaplugin", mode "write". Format: s16_le, ... channels 2, srate 48000, interleaved. - [ Connected chainsetup: "untitled-chainsetup" ] - [ Controller/Starting batch processing ] --- - [ Engine - Driver start ] -- - [ Engine - Processing finished ] --- - [ Controller/Batch processing finished (0) ] --- - [ Controller/Processing stopped (cond) ] --- - [ Engine exiting ] - (eca-control-objects) Disconnecting chainsetup: "untitled-chainsetup". So we could consider problem 1) solved. Let's try to go to problem 2). The above command properly sends channel 1 to loudspeaker 1 and channel 2 to loudspeaker 2, but it doesn't manage to send channel 3 into loudspeaker 3. Actually, the Behringer seems to behave in stereo mode. But the strange thing is that outputs `B' (i.e. 3 and 4) do not work at all and seems to be dead. So please help: how can I - if ever possible - send channel 3 to loudspeaker 3? And, more in general: is it possible, even with some other device, to achive what I want? Thanks, Rodolfo
Re: Multichannel audio playback
didier gaumet writes: > Le 28/04/2021 à 09:37, Rodolfo Medina a écrit : > [...] >> First of all, problem 1): same error now with a 2-channel and a 3-channel >> file: > [...] >> ERROR: Connecting chainsetup failed: "Enabling chainsetup: AUDIOIO-ALSA: >> ... Channel count 2 is out of range!" > [...] > > http://nosignal.fi/ecasound/Documentation/examples.html#multichannel > > I do not use ecasound but it seems to me that this indicates that by default > ecasound is in a one channel (mono, channel #1) mode and that channels have > to be specified with -a, perhaps like this: > > $ ecasound -a:1,2,3 -i:sndfile,3canali.wav -o alsahw,2,0 > or perhaps > $ ecasound -a:all -i:sndfile,3canali.wav -o alsahw,2,0 Thanks, Didier: it seems to work with 2 channels: $ ecasound -a:1,2 -i:sndfile,2canali.wav -o alsahw,2,0 ** *ecasound v2.9.1 (C) 1997-2014 Kai Vehmanen and others ** (eca-chainsetup) Chainsetup "untitled-chainsetup" (eca-chainsetup) NOTE: Real-time configuration, but insufficient privileges ... to utilize real-time scheduling (SCHED_FIFO). With small buffersizes, ... this may cause audible glitches during processing. (eca-chainsetup) "rt" buffering mode selected. (audioio_sndfile) Using libsndfile to open file "2canali.wav" for reading. (eca-chainsetup) NOTE: using existing audio parameters -f:s16_le,2,48000 ... for object 'sndfile' (tried to open with -f:s16_le,2,44100). (eca-chainsetup) Opened input "sndfile", mode "read". Format: s16_le, ... channels 2, srate 48000, interleaved (locked params). (eca-chainsetup) Opened output "alsahw", mode "write". Format: s16_le, ... channels 2, srate 48000, interleaved. - [ Connected chainsetup: "untitled-chainsetup" ] - [ Controller/Starting batch processing ] --- - [ Engine - Driver start ] -- - [ Engine - Processing finished ] --- - [ Controller/Batch processing finished (0) ] --- - [ Controller/Processing stopped (cond) ] --- - [ Engine exiting ] - (eca-control-objects) Disconnecting chainsetup: "untitled-chainsetup". but not with 3: $ ecasound -a:1,2,3 -i:sndfile,3canali.wav -o alsahw,2,0 ** *ecasound v2.9.1 (C) 1997-2014 Kai Vehmanen and others ** (eca-chainsetup) Chainsetup "untitled-chainsetup" (eca-chainsetup) NOTE: Real-time configuration, but insufficient privileges ... to utilize real-time scheduling (SCHED_FIFO). With small buffersizes, ... this may cause audible glitches during processing. (eca-chainsetup) "rt" buffering mode selected. (audioio_sndfile) Using libsndfile to open file "3canali.wav" for reading. (eca-chainsetup) NOTE: using existing audio parameters -f:s16_le,3,48000 ... for object 'sndfile' (tried to open with -f:s16_le,2,44100). (eca-chainsetup) Opened input "sndfile", mode "read". Format: s16_le, ... channels 3, srate 48000, interleaved (locked params). ERROR: Connecting chainsetup failed: "Enabling chainsetup: AUDIOIO-ALSA: ... Channel count 2 is out of range!" Please help... Rodolfo
Re: Multichannel audio playback
Joel Roth writes: > On Tue, Apr 27, 2021 at 10:22:11AM -1000, Joel Roth wrote: >> >> ecasound -i:libsndfile,audiofile -o alsa > > that should be -i:sndfile Thanks, Joel... 2 problems seem to be involved: 1) make ecasound read and play the file; 2) properly use all those many outputs on the Behringer's back. (Up to now, I can't make the `B' Playback Outputs work yet. Only `A' seem to respond.) First of all, problem 1): same error now with a 2-channel and a 3-channel file: $ ecasound -i:2canali.wav -o alsahw,2,0 ** *ecasound v2.9.1 (C) 1997-2014 Kai Vehmanen and others ** (eca-chainsetup) Chainsetup "untitled-chainsetup" (eca-chainsetup) NOTE: Real-time configuration, but insufficient privileges ... to utilize real-time scheduling (SCHED_FIFO). With small buffersizes, ... this may cause audible glitches during processing. (eca-chainsetup) "rt" buffering mode selected. (eca-chainsetup) NOTE: using existing audio parameters -f:s16_le,2,48000 ... for object '2canali.wav' (tried to open with -f:s16_le,2,44100). (eca-chainsetup) Opened input "2canali.wav", mode "read". Format: s16_le, ... channels 2, srate 48000, interleaved (locked params). ERROR: Connecting chainsetup failed: "Enabling chainsetup: AUDIOIO-ALSA: ... Channel count 2 is out of range!" $ ecasound -i:sndfile,3canali.wav -o alsahw,2,0 ** *ecasound v2.9.1 (C) 1997-2014 Kai Vehmanen and others ** (eca-chainsetup) Chainsetup "untitled-chainsetup" (eca-chainsetup) NOTE: Real-time configuration, but insufficient privileges ... to utilize real-time scheduling (SCHED_FIFO). With small buffersizes, ... this may cause audible glitches during processing. (eca-chainsetup) "rt" buffering mode selected. (audioio_sndfile) Using libsndfile to open file "3canali.wav" for reading. (eca-chainsetup) NOTE: using existing audio parameters -f:s16_le,3,48000 ... for object 'sndfile' (tried to open with -f:s16_le,2,44100). (eca-chainsetup) Opened input "sndfile", mode "read". Format: s16_le, ... channels 3, srate 48000, interleaved (locked params). ERROR: Connecting chainsetup failed: "Enabling chainsetup: AUDIOIO-ALSA: ... Channel count 2 is out of range!" Both files were created via `sox -M' command from respectively 2 and 3 mono files. Please help if you can. Thanks Rodolfo
Multichannel audio playback (was: Multichannel audio listening)
Joel Roth writes: > On Mon, Mar 05, 2018 at 10:39:19AM +0100, Rodolfo Medina wrote: >> Hi all. >> >> After learning, some months ago, thanks to listers' help, how to live record >> into a multi channel audio file, I was wondering about the reverse problem: >> now I have my multi channel audio file, e.g. composed by three different >> channels. Is it possibile (I guess it is), and how?, to send each of the >> three outputs into a different loud speaker and so listen to the song...? >> > > Hi Rodolfo, > > Ecasound is pretty convenient for routing audio. > > If you connect three powered speakers to the first three > channels of a (sufficiently capable) soundcard and you're > using ALSA (the default low-level linux audio API), it's > pretty simple: > > For example, > > ecasound -i:3ch.wav -f:16,3,44100 -o:alsa,default Four years ago this interesting thread. Now I've purchased a Behringer UMC404HD 4-channels audio interface and finally want to do my experiment. Now I have a 3-channel .wav file and 3 loudspeakers connected to Behringer's output: I want to playback each channel to a different speaker. I get error: $ ecasound -i 3canali.wav -f:16,3,44100 -o alsahw,2,0 ** *ecasound v2.9.1 (C) 1997-2014 Kai Vehmanen and others ** (eca-chainsetup) Chainsetup "untitled-chainsetup" (eca-chainsetup) NOTE: Real-time configuration, but insufficient privileges ... to utilize real-time scheduling (SCHED_FIFO). With small buffersizes, ... this may cause audible glitches during processing. (eca-chainsetup) "rt" buffering mode selected. ERROR: Connecting chainsetup failed: "Enabling chainsetup: AUDIOIO-WAVE: ... Only WAVE_FORMAT_PCM and WAVE_FORMAT_IEEE_FLOAT are supported." Please help whoever can. One more thing: on the back of Behringer there are two groups of `playback outputs': group A and group B. Each of the two groups has 4 holes: 2 black 6.35mm, one red RCA and one white RCA. Please help also to understand how to use them for my special purpose. Besides, on Behringer's back there is one more group of outputs called `Main Out' and including two 6.35mm and two XLR. Thanks in advance for any help, Rodolfo
Re: Dispositivo de Rede Wi-fi Não reconhecido e com problemas na configuração do arquivo interfaces
Esse cara tem uma placa wifi parecida com a sua, ele resolveu da seguinte forma: https://www.reddit.com/r/debian/comments/ehcpab/debian_10_wifi_is_not_showing_up_anywhere_even/ Att. Em sáb., 17 de abr. de 2021 às 18:24, Antonio Caetano < antoniocaet...@protonmail.com> escreveu: > Boa noite Rodolfo, tudo bem? > > Já tentei desabilitar o secure boot, mas não resolveu, de qualquer forma > obrigado pela ajuda. > > Att, > > > Antonio Caetano > > Sent with ProtonMail <https://protonmail.com> Secure Email. > > ‐‐‐ Original Message ‐‐‐ > Em sábado, 17 de abril de 2021 às 19:10, Rodolfo > escreveu: > > Olha, não sei se vai te ajudar, mas logo que comprei meu notebook instalei > o Debian Buster, logo de primeira o wifi pegou mas ficava caindo do > nada depois de tanto fuçar, resolvi desabilitar o secure boot, e parou > de cair e de quebra a placa gráfica também começou a funcionar. Faça esse > teste. > > > Att. > > Em sáb., 17 de abr. de 2021 às 18:06, Antonio Caetano < > antoniocaet...@protonmail.com> escreveu: > >> Boa tarde amigos, tudo bem? >> >> Estou com um problema, tenho uma placa de rede wireless da intel e quando >> instalei o debian 10 buster, por padrão não foi instalado o firmware e >> muito menos carregou os módulos no kernel, daí pesquisei um pouco e >> consegui instalar um firmware da intel, entretanto ele funciona >> parcialmente, eu consigo acessar a rede wifi, navegar na internet, >> entretanto se eu tentar configurar um dhcp na própria placa ou configurar >> ip estático no ficheiro /etc/network/interfaces o sistema me desconecta da >> rede wifi e não reconhece mais o firmware que instalei muito menos carrega >> os módulos necessários, basicamente eu nem consigo mais enxergar a rede >> wi-fi. Em resumo só funciona a configuração de "interface network lo" e >> "inet loopback", daí é muito complicado,pois não consigo fazer testes com >> virtualização, servidores de arquivo que necessitam de ip estático etc, e >> outros computadores não me enxergam na rede, gostaria por gentileza que uma >> ajuda se possível, desde já agradeço abraço a todos. Segue abaixo >> informações que talvez ajudem vocês a entenderem meu problema. >> >> # FIRMWARE INSTALADO NO DIRETORIO /USR/LIB/FIRMWARE: >> >> root@debian:/usr/lib/firmware# ls >> av7110iwlwifi-135-6.ucodeiwlwifi-5150-2.ucode >> iwlwifi-7265D-22.ucode iwlwifi-9260-th-b0-jf-b0-38.ucode >> carl9170-1.fw iwlwifi-2000-6.ucode iwlwifi-6000-4.ucode >> iwlwifi-7265D-29.ucode iwlwifi-9260-th-b0-jf-b0-41.ucode >> cis iwlwifi-2030-6.ucode iwlwifi-6000g2a-5.ucode >> iwlwifi-8000C-22.ucode keyspan_pda >> dsp56kiwlwifi-3160-17.ucode iwlwifi-6000g2a-6.ucode >> iwlwifi-8000C-36.ucode usbduxfast_firmware.bin >> hpiwlwifi-3160-9.ucode iwlwifi-6000g2b-6.ucode >> iwlwifi-8265-22.ucode usbdux_firmware.bin >> intel iwlwifi-3168-22.ucode iwlwifi-6050-5.ucode >> iwlwifi-8265-36.ucode usbduxsigma_firmware.bin >> isci iwlwifi-3168-29.ucode iwlwifi-7260-17.ucode >> iwlwifi-9000-pu-b0-jf-b0-34.ucode >> iwlwifi-1000-5.ucode iwlwifi-3945-2.ucode iwlwifi-7260-9.ucode >> iwlwifi-9000-pu-b0-jf-b0-38.ucode >> iwlwifi-100-5.ucode iwlwifi-4965-2.ucode iwlwifi-7265-17.ucode >> iwlwifi-9000-pu-b0-jf-b0-41.ucode >> iwlwifi-105-6.ucode iwlwifi-5000-5.ucode iwlwifi-7265-9.ucode >> iwlwifi-9260-th-b0-jf-b0-34.ucode >> root@debian:/usr/lib/firmware# cd /etc/network/ >> >> >> >> SAIDA COMANDO LSPCI: >> >> root@debian:/etc/network# lspci >> 00:00.0 Host bridge: Intel Corporation Device 3e35 (rev 0c) >> 00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 >> (Whiskey Lake) (rev 02) >> 00:04.0 Signal processing controller: Intel Corporation Skylake Processor >> Thermal Subsystem (rev 0c) >> 00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture >> Model >> 00:12.0 Signal processing controller: Intel Corporation Cannon Point-LP >> Thermal Controller (rev 30) >> 00:14.0 USB controller: Intel Corporation Cannon Point-LP USB 3.1 xHCI >> Controller (rev 30) >> 00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared SRAM (rev 30) >> 00:14.3 Network controller: Intel Corporation Cannon Point-LP CNVi >> [Wireless-AC] (rev 30) >> 00:15.0 Serial bus controller [0c80]: Intel Corporation Device 9de8 (rev >> 30) >> >> >> CONFIGURAÇÃO ARQUIVO /ETC/NETWORK/INTERFACES(ÚNICO QUE CONECTA AO WIFI E >> NAVEGA NA INTERNET): >> >> root@debian:/etc/network# cat /etc/network/interfaces >> # This file describes the network interfaces available on your system >> # and how to activate them. For more information, see interfaces(5). >> >> source /etc/network/interfaces.d/* >> >> # The loopback network interface >> auto lo >> iface lo inet loopback >> >> >> >> >> >> Att, >> >> >> Antonio Caetano >> >> >> >> >
Re: Dispositivo de Rede Wi-fi Não reconhecido e com problemas na configuração do arquivo interfaces
Olha, não sei se vai te ajudar, mas logo que comprei meu notebook instalei o Debian Buster, logo de primeira o wifi pegou mas ficava caindo do nada depois de tanto fuçar, resolvi desabilitar o secure boot, e parou de cair e de quebra a placa gráfica também começou a funcionar. Faça esse teste. Att. Em sáb., 17 de abr. de 2021 às 18:06, Antonio Caetano < antoniocaet...@protonmail.com> escreveu: > Boa tarde amigos, tudo bem? > > Estou com um problema, tenho uma placa de rede wireless da intel e quando > instalei o debian 10 buster, por padrão não foi instalado o firmware e > muito menos carregou os módulos no kernel, daí pesquisei um pouco e > consegui instalar um firmware da intel, entretanto ele funciona > parcialmente, eu consigo acessar a rede wifi, navegar na internet, > entretanto se eu tentar configurar um dhcp na própria placa ou configurar > ip estático no ficheiro /etc/network/interfaces o sistema me desconecta da > rede wifi e não reconhece mais o firmware que instalei muito menos carrega > os módulos necessários, basicamente eu nem consigo mais enxergar a rede > wi-fi. Em resumo só funciona a configuração de "interface network lo" e > "inet loopback", daí é muito complicado,pois não consigo fazer testes com > virtualização, servidores de arquivo que necessitam de ip estático etc, e > outros computadores não me enxergam na rede, gostaria por gentileza que uma > ajuda se possível, desde já agradeço abraço a todos. Segue abaixo > informações que talvez ajudem vocês a entenderem meu problema. > > # FIRMWARE INSTALADO NO DIRETORIO /USR/LIB/FIRMWARE: > > root@debian:/usr/lib/firmware# ls > av7110iwlwifi-135-6.ucodeiwlwifi-5150-2.ucode > iwlwifi-7265D-22.ucode iwlwifi-9260-th-b0-jf-b0-38.ucode > carl9170-1.fw iwlwifi-2000-6.ucode iwlwifi-6000-4.ucode > iwlwifi-7265D-29.ucode iwlwifi-9260-th-b0-jf-b0-41.ucode > cis iwlwifi-2030-6.ucode iwlwifi-6000g2a-5.ucode > iwlwifi-8000C-22.ucode keyspan_pda > dsp56kiwlwifi-3160-17.ucode iwlwifi-6000g2a-6.ucode > iwlwifi-8000C-36.ucode usbduxfast_firmware.bin > hpiwlwifi-3160-9.ucode iwlwifi-6000g2b-6.ucode > iwlwifi-8265-22.ucode usbdux_firmware.bin > intel iwlwifi-3168-22.ucode iwlwifi-6050-5.ucode > iwlwifi-8265-36.ucode usbduxsigma_firmware.bin > isci iwlwifi-3168-29.ucode iwlwifi-7260-17.ucode > iwlwifi-9000-pu-b0-jf-b0-34.ucode > iwlwifi-1000-5.ucode iwlwifi-3945-2.ucode iwlwifi-7260-9.ucode > iwlwifi-9000-pu-b0-jf-b0-38.ucode > iwlwifi-100-5.ucode iwlwifi-4965-2.ucode iwlwifi-7265-17.ucode > iwlwifi-9000-pu-b0-jf-b0-41.ucode > iwlwifi-105-6.ucode iwlwifi-5000-5.ucode iwlwifi-7265-9.ucode > iwlwifi-9260-th-b0-jf-b0-34.ucode > root@debian:/usr/lib/firmware# cd /etc/network/ > > > > SAIDA COMANDO LSPCI: > > root@debian:/etc/network# lspci > 00:00.0 Host bridge: Intel Corporation Device 3e35 (rev 0c) > 00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 > (Whiskey Lake) (rev 02) > 00:04.0 Signal processing controller: Intel Corporation Skylake Processor > Thermal Subsystem (rev 0c) > 00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture Model > 00:12.0 Signal processing controller: Intel Corporation Cannon Point-LP > Thermal Controller (rev 30) > 00:14.0 USB controller: Intel Corporation Cannon Point-LP USB 3.1 xHCI > Controller (rev 30) > 00:14.2 RAM memory: Intel Corporation Cannon Point-LP Shared SRAM (rev 30) > 00:14.3 Network controller: Intel Corporation Cannon Point-LP CNVi > [Wireless-AC] (rev 30) > 00:15.0 Serial bus controller [0c80]: Intel Corporation Device 9de8 (rev > 30) > > > CONFIGURAÇÃO ARQUIVO /ETC/NETWORK/INTERFACES(ÚNICO QUE CONECTA AO WIFI E > NAVEGA NA INTERNET): > > root@debian:/etc/network# cat /etc/network/interfaces > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > source /etc/network/interfaces.d/* > > # The loopback network interface > auto lo > iface lo inet loopback > > > > > > Att, > > > Antonio Caetano > > > >
Re: nmap
Procede sim... 32774/tcp closed sometimes-rpc11? Tipo, te aconselho a bloquear tudo que tu não conhece e deixar disponível somente os que você conhece. Quando começarem a chorar por falta de algo daí você vai habilitando novamente. São muitas portas aí, cuidado! Att. Rodolfo Azevedo Em seg., 15 de fev. de 2021 às 12:02, luiz gil escreveu: > Boa tarde aos amigos. > Gostaria que pudessem avaliar se procede minha preocupacao quanto a um > dispositivo encontrado na rede que utilizo. > O comando utilizado foi o nmap com os servicos respectivos apresentados > pelo comando. > > Nmap scan report for ... > Host is up (0.36s latency). > Not shown: 983 filtered ports > PORT STATE SERVICE > 106/tcp closed pop3pw > 179/tcp closed bgp > 1192/tcp closed caids-sensor > 1236/tcp closed bvcontrol > 1300/tcp closed h323hostcallsc > 2045/tcp closed cdfunc > 2065/tcp closed dlsrpn > 3889/tcp closed dandv-tester > 3995/tcp closed iss-mgmt-ssl > 4001/tcp closed newoak > 6156/tcp closed unknown > 6667/tcp closed irc > 6969/tcp closed acmsoda > 8652/tcp closed unknown > 9000/tcp closed cslistener > 10004/tcp closed emcrmirccd > 32774/tcp closed sometimes-rpc11 > MAC Address: EE:99:A4:D3:82:69 (Unknown) > > -- > Atenciosamente, > Luiz Carlos Proenca Gil >
Re: Fone Bluetooth no Debian
Bem lembrado, fiz isso no meu tb Em qui., 11 de fev. de 2021 às 19:25, Henrique escreveu: > Olá! > > Tive um problema relativamente parecido semana passada. > Uma máquina de 2007 com Debian 10 instalava e usava normalmente um > adaptador usb para fone, uma outra de 2020 com o mesmo Debian 10 não rodava > o mesmo adaptador. Só consegui "resolver" ao retirar a segurança do boot > uefi da máquina nova. > > *De:* china...@gmail.com > *Enviados:* 11 de fevereiro de 2021 19:24 > *Para:* rof20...@gmail.com > *Cc:* debian-user-portuguese@lists.debian.org > *Assunto:* Re: Fone Bluetooth no Debian > > Sim, instalei seguindo uma das muitas receitas de bolo que achei nas > pesquisas. > > Até onde cheguei, o módulo bluetooth do pulseaudio não carregou, ou o > módulo bluetooth tá com problemas. > > > Em qui, 11 de fev de 2021 17:07, Rodolfo escreveu: > >> Qual pacote de bluetooth você instalou? Já tentou esse? >> >> apt install bluez-* >> >> >> Em qui., 11 de fev. de 2021 às 16:03, China >> escreveu: >> >>> Estou usando um Notebook com Debian 10 Stable com alguns pacotes >>> backpor relativos ao vídeo ATI. Configurei um Fone Bluetooth que >>> funcionou por um dia, depois parou de funcionar. O fone é detectado >>> mas não conecta. Revirei todos os tutoriais achados no Google e na >>> wiki do Debian, mas nenhuma solução resolveu. O erro é o colado >>> abaixo: >>> >>> root@debian-ideapad:~# systemctl status bluetooth >>> ● bluetooth.service - Bluetooth service >>>Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; >>> vendor preset: enabled) >>>Active: active (running) since Thu 2021-02-11 15:15:04 -03; 55min ago >>> Docs: man:bluetoothd(8) >>> Main PID: 8468 (bluetoothd) >>>Status: "Running" >>> Tasks: 1 (limit: 4915) >>>Memory: 2.5M >>>CGroup: /system.slice/bluetooth.service >>>└─8468 /usr/libexec/bluetooth/bluetoothd >>> >>> fev 11 15:18:49 debian-ideapad bluetoothd[8468]: a2dp-sink profile >>> connect failed for 2E:2A:2B:C8:61:8E: Protocol not available >>> fev 11 15:18:49 debian-ideapad bluetoothd[8468]: a2dp-sink profile >>> connect failed for 2E:2A:2B:C8:61:8E: Protocol not available >>> fev 11 15:18:50 debian-ideapad bluetoothd[8468]: a2dp-sink profile >>> connect failed for 2E:2A:2B:C8:61:8E: Protocol not available >>> >>> Uma coisa que eu não consegui fazer foi carregar o módulo recomendado: >>> china@debian-ideapad:~$ pactl load module-bluetooth-discover >>> Nenhum comando válido especificado. >>> >>> As soluções apresentadas são praticamente as mesmas, mas nenhuma >>> funcionou para mim. Mais alguém com este problema? Alguma ideia de >>> como resolver?? >>> >>> -- >>> Enviado de um dispositivo móvel >>> >>>
Re: Fone Bluetooth no Debian
Qual pacote de bluetooth você instalou? Já tentou esse? apt install bluez-* Em qui., 11 de fev. de 2021 às 16:03, China escreveu: > Estou usando um Notebook com Debian 10 Stable com alguns pacotes > backpor relativos ao vídeo ATI. Configurei um Fone Bluetooth que > funcionou por um dia, depois parou de funcionar. O fone é detectado > mas não conecta. Revirei todos os tutoriais achados no Google e na > wiki do Debian, mas nenhuma solução resolveu. O erro é o colado > abaixo: > > root@debian-ideapad:~# systemctl status bluetooth > ● bluetooth.service - Bluetooth service >Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; > vendor preset: enabled) >Active: active (running) since Thu 2021-02-11 15:15:04 -03; 55min ago > Docs: man:bluetoothd(8) > Main PID: 8468 (bluetoothd) >Status: "Running" > Tasks: 1 (limit: 4915) >Memory: 2.5M >CGroup: /system.slice/bluetooth.service >└─8468 /usr/libexec/bluetooth/bluetoothd > > fev 11 15:18:49 debian-ideapad bluetoothd[8468]: a2dp-sink profile > connect failed for 2E:2A:2B:C8:61:8E: Protocol not available > fev 11 15:18:49 debian-ideapad bluetoothd[8468]: a2dp-sink profile > connect failed for 2E:2A:2B:C8:61:8E: Protocol not available > fev 11 15:18:50 debian-ideapad bluetoothd[8468]: a2dp-sink profile > connect failed for 2E:2A:2B:C8:61:8E: Protocol not available > > Uma coisa que eu não consegui fazer foi carregar o módulo recomendado: > china@debian-ideapad:~$ pactl load module-bluetooth-discover > Nenhum comando válido especificado. > > As soluções apresentadas são praticamente as mesmas, mas nenhuma > funcionou para mim. Mais alguém com este problema? Alguma ideia de > como resolver?? > > -- > Enviado de um dispositivo móvel > >
Re: Desenvolvedores Debian
https://nm.debian.org/public/people/dd_all/ Debian Developers Att. Rodolfo Azevedo Em sex., 8 de jan. de 2021 às 12:46, Sérgio Abrantes < sergioabran...@gmail.com> escreveu: > Boa tarde pessoal, > > Vocês sabem dizer se há desenvolvedores no Debian que são bancados por > empresas ou são apenas pessoas "comuns" no seu tempo livre contribuindo? > > E se issa informação está disponível no site, alguém poderia enviar o > link? Não encontrei. > > Encontrei apenas empresas que apoiam financeiramente ou com doação de > produtos e serviços. > > Até! > > Sérgio Abrantes >
Re: Sugestão: Kernel dinâmico
Você já tentou inserir um módulo com o module-assistant? Ele é bem antigo e já cheguei a utilizar ele na época do etch. Faz anos que não uso ele mas ainda existe: https://wiki.debian.org/ModuleAssistant Att. Rodolfo Azevedo Em qui., 7 de jan. de 2021 às 16:15, Paulo escreveu: > Olá Xará, > > Rsrs tô por fora e parecendo o Rubinho então, rs rs > > Mas, então, porque causa, motivo razão ou circunstância tenho que > recompilar o kernel só para adicionar um módulo? > > Não ficaria mais fácil só colocar o módulo lá, talvez precisasse de um > reboot para carregar. > > Recompilar e demais, rss > > Tô apanhando no Sensor de Impressão Digital do meu note Lg-gram faz mais > de dois anos que não consigo por para funcionar. > Só falta isso e necas. > > Nadei, nadei nadei e morri na praia, rss > > Att, > > Paulo > > > Em 07/01/2021 16:33, Paulo Ricardo Bruck escreveu: > > Olá Paulo > > > Mito antigamente o kernel era compilado da forma a ser monolítico, mas > faz mais de 20 anos que as distros montam kernel modular ( ou mais). > > ats > > Em qui., 7 de jan. de 2021 às 16:11, Paulo escreveu: > >> Olá Debinianas e Debinianos, >> >> Por que, em vez de ter um kernel monolítico e grande. >> O kernel não poderia ser mínimo e os módulos adicionados? >> >> Sem ter que compilar o kernel para cada novo módulo. >> Isso tornaria o kernel mais simples, rápido e menor. >> >> Não sei as dificuldades de fazer isso, nem as implicações. >> >> Aceito sugestões desde que sejam construtivas e até orientações que me >> expliquem o porque do kernel ser grande e termos que recompilar para um >> módulo (Ex: Sensor de Impressão Digital). >> >> Att, >> >> Paulo Correia >> >> > > -- > Paulo Ricardo Bruck consultor > tel 011 3596-4881/4882 > 011 98140-9184 (Whatsup/TIM) > http://www.contatoglobal.com.br <http://www.contatogs.com.br/> > > Domou arigatou gozaimasu > >
Re: APT não conecta no servidor do repositório
Humm, realmente não sei como ajudar nesse caso, mas provável que seja o problema que você citou, do ip público. Qualquer coisa eu eu ache aqui lhe aviso. Att. Rodolfo Azevedo Em ter., 22 de dez. de 2020 às 13:11, Moksha Tux escreveu: > Esqueci de informar que fiz o procedimento que me orientou na mensagem > anterior e o GET / da pagina do google veio de boa mas a do repositório nada > > Em ter., 22 de dez. de 2020 às 13:57, Rodolfo > escreveu: > >> Tente esses comandos: >> >> $ telnet google.com.br 80 >> >> Quando abrir o terminal do telnet digite isso: GET / >> >> Se retornar uma página HTML você está com internet, caso contrário, pode >> haver algum problema de conexão na sua rede ou bloqueio de firewall. >> >> Você pode realizar o teste para o IP que mostra esse erro tb: >> >> $ telnet 151.101.178.132 80 >> >> Att. >> >> Rodolfo Azevedo >> >> Em ter., 22 de dez. de 2020 às 12:54, Moksha Tux >> escreveu: >> >>> Boa tarde meus caros! >>> >>> Estou com um problema que não consegui achar um solução no google e já >>> tem um tempinho. è o seguinte toda vez que eu tento utilizar o APT em meu >>> servidor Debian 10 aparece um erro que acredito que seja de conexão com o >>> servidor e fica um tempão e retorna um erro dizendo que não conseguiu se >>> conectar com o servidor do mirror, vejam abaixo: >>> >>> fica assim um tempão: >>> Obter:1 http://security.debian.org/debian-security buster/updates >>> InRelease [65,4 kB] >>> Obter:2 http://deb.debian.org/debian buster InRelease [121 kB] >>> Obter:1 http://security.debian.org/debian-security buster/updates >>> InRelease [65,4 kB] >>> >>> Depois retorna isso: >>> Err:2 http://deb.debian.org/debian buster InRelease >>> Conexão falhou [IP: 151.101.178.132 80] >>> >>> E volta para o prompt, alguém aqui poderia me salvar por favor? >>> >>> Grato >>> >>>
Re: APT não conecta no servidor do repositório
Tente esses comandos: $ telnet google.com.br 80 Quando abrir o terminal do telnet digite isso: GET / Se retornar uma página HTML você está com internet, caso contrário, pode haver algum problema de conexão na sua rede ou bloqueio de firewall. Você pode realizar o teste para o IP que mostra esse erro tb: $ telnet 151.101.178.132 80 Att. Rodolfo Azevedo Em ter., 22 de dez. de 2020 às 12:54, Moksha Tux escreveu: > Boa tarde meus caros! > > Estou com um problema que não consegui achar um solução no google e já tem > um tempinho. è o seguinte toda vez que eu tento utilizar o APT em meu > servidor Debian 10 aparece um erro que acredito que seja de conexão com o > servidor e fica um tempão e retorna um erro dizendo que não conseguiu se > conectar com o servidor do mirror, vejam abaixo: > > fica assim um tempão: > Obter:1 http://security.debian.org/debian-security buster/updates > InRelease [65,4 kB] > Obter:2 http://deb.debian.org/debian buster InRelease [121 kB] > Obter:1 http://security.debian.org/debian-security buster/updates > InRelease [65,4 kB] > > Depois retorna isso: > Err:2 http://deb.debian.org/debian buster InRelease > Conexão falhou [IP: 151.101.178.132 80] > > E volta para o prompt, alguém aqui poderia me salvar por favor? > > Grato > >
Re: Loja Gnome
Instalar o que? Em sex., 11 de dez. de 2020 às 17:08, BLC escreveu: > Posso esta instalando o pelo apt? > > On Fri, Dec 11, 2020 at 6:06 PM Rodolfo wrote: > >> Agora resta saber o que você quer que volte a funcionar, poderia nos >> dizer? >> >> Em sex., 11 de dez. de 2020 às 17:05, BLC >> escreveu: >> >>> ele logou deboas >>> e agr?! prfv >>> >>> >>> Em Sex, 11 de dez de 2020 17:59, Rodolfo escreveu: >>> >>>> Certo, já tentou o seguinte comando? >>>> >>>> $ su - >>>> >>>> Informe a senha do root e verifica se o mesmo loga normalmente. >>>> >>>> Em sex., 11 de dez. de 2020 às 16:57, BLC >>>> escreveu: >>>> >>>>> Debian 10 buster >>>>> >>>>> Em Sex, 11 de dez de 2020 17:56, Rodolfo >>>>> escreveu: >>>>> >>>>>> Qual versão do Debian? >>>>>> >>>>>> Em sex., 11 de dez. de 2020 às 16:54, BLC >>>>>> escreveu: >>>>>> >>>>>>> Olá, então, eu apaguei meio que sem querer o app "Gnome softwer" e >>>>>>> nem o sudo não esta funcionando, queria saber se dá para recuperar! >>>>>>> >>>>>>
Re: Loja Gnome
Agora resta saber o que você quer que volte a funcionar, poderia nos dizer? Em sex., 11 de dez. de 2020 às 17:05, BLC escreveu: > ele logou deboas > e agr?! prfv > > > Em Sex, 11 de dez de 2020 17:59, Rodolfo escreveu: > >> Certo, já tentou o seguinte comando? >> >> $ su - >> >> Informe a senha do root e verifica se o mesmo loga normalmente. >> >> Em sex., 11 de dez. de 2020 às 16:57, BLC >> escreveu: >> >>> Debian 10 buster >>> >>> Em Sex, 11 de dez de 2020 17:56, Rodolfo escreveu: >>> >>>> Qual versão do Debian? >>>> >>>> Em sex., 11 de dez. de 2020 às 16:54, BLC >>>> escreveu: >>>> >>>>> Olá, então, eu apaguei meio que sem querer o app "Gnome softwer" e nem >>>>> o sudo não esta funcionando, queria saber se dá para recuperar! >>>>> >>>>
Re: Loja Gnome
Qual versão do Debian? Em sex., 11 de dez. de 2020 às 16:54, BLC escreveu: > Olá, então, eu apaguei meio que sem querer o app "Gnome softwer" e nem o > sudo não esta funcionando, queria saber se dá para recuperar! >
Re: Capture screen with mencoder
Nicolas George writes: > Rodolfo Medina (12020-07-29): >> Thanks... The reason why I wanted to use mencoder instead of ffmpeg is that >> with the latter, when I tried to capture webcam and audio together, >> especially with my old laptop (but partially also with my new desktop pc), >> I've been banged against `a sea of troubles': sync problems, video freezing, >> video stuttering, background noise, output interrupted... whereas with >> mencoder and the command I posted above everything went fine at first try. >> So that, with desktop capture, I had to give up the idea of recording video >> and audio together and am recording them separately... > > AFAIK, people manage to use ffmpeg for that. I strongly suggest you try > to get this working rather than relying on a project in vegetative > state. Help can be fond on the ffmpeg-user mailing-list, but you will > need to give much more details than you did here. No help came from ffmpeg mailing list apart from user Leonardo who helped me privately but, in the end, with my 10 years old netbook, I had to give up... maybe I was asking too much. Mencoder instead worked immediately like a charm. Thanks, Rodolfo
Re: Capture screen with mencoder
Nicolas George writes: > Rodolfo Medina (12020-07-28): >>How can I modify the above command so to capture >> desktop screen instead (with audio)? > > > mencoder does not support capturing the desktop. You may manage to tweak > it to enable libavdevice, but it is completely unsupported, and you > would have it easier using ffmpeg directly. Anyway, nowadays, using > mencoder is not recommended except for DVDs. Thanks... The reason why I wanted to use mencoder instead of ffmpeg is that with the latter, when I tried to capture webcam and audio together, especially with my old laptop (but partially also with my new desktop pc), I've been banged against `a sea of troubles': sync problems, video freezing, video stuttering, background noise, output interrupted... whereas with mencoder and the command I posted above everything went fine at first try. So that, with desktop capture, I had to give up the idea of recording video and audio together and am recording them separately... Regards, Rodolfo
Capture screen with mencoder
I posted this to Mplayer mailing list but got no answer so am sharing it here hoping someone can help... I capture my webcam stream with: $ mencoder tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0:forceaudio:alsa:adevice=hw.1,0 -ovc lavc -oac mp3lame -lameopts cbr:br=64:mode=3 -o webcam.avi and it works fine. How can I modify the above command so to capture desktop screen instead (with audio)? I suppose it's a matter of replacing /dev/video0 with something else but don't know what nor the correct syntax... Thanks for any help, Rodolfo
Re: About /var/log/dpgk.log
The Wanderer writes:
> On 2020-07-27 at 19:02, Rodolfo Medina wrote:
>
>> The Wanderer writes:
>>
>>> On 2020-07-27 at 10:37, The Wanderer wrote:
>>>
>>>> What you want to do instead is to run this exact latter command, and
>>>> pass the output of that into the 'aptitude purge' command.
>>>
>>>> Try:
>>>>
>>>> $ aptitude purge $(grep "2020-07-23.*.install " /var/log/dpkg.log | awk
>>>> '{ print $4 }' | tr '\n' ' ')
>>>>
>>>> and see what you get.
>>>
>>> Turns out that the 'tr' part can be dropped as well; the subshell
>>> redirection is smart enough for the newlines to be processed correctly.
>>
>> All right, but with the `tr' part then it's easier to copy and paste the
>> output
>> and pass it as argument to `# aptitude purge'...
>
> Quite true, and that's what I thought at first you were doing, until you
> gave the command line with incorrect syntax that I responded to earlier.
Yes, it was a moment of confusion of mine...
thanks,
rodolfo
Re: About /var/log/dpgk.log
The Wanderer writes:
> On 2020-07-27 at 10:37, The Wanderer wrote:
>
>> What you want to do instead is to run this exact latter command, and
>> pass the output of that into the 'aptitude purge' command.
>
>> Try:
>>
>> $ aptitude purge $(grep "2020-07-23.*.install " /var/log/dpkg.log | awk
>> '{ print $4 }' | tr '\n' ' ')
>>
>> and see what you get.
>
> Turns out that the 'tr' part can be dropped as well; the subshell
> redirection is smart enough for the newlines to be processed correctly.
All right, but with the `tr' part then it's easier to copy and paste the output
and pass it as argument to `# aptitude purge'...
thanks
rodolfo
Re: About /var/log/dpgk.log
Greg Wooledge writes: > On Mon, Jul 27, 2020 at 07:42:31PM +0000, Rodolfo Medina wrote: >> Must be so because >> >> $ zgrep "2018.*.install " /var/log/dpkg* >> >> gives no output and so with 2017, 2016 and 2015, whereas for 2019 and 2020 >> there is output... > > You can use ls -l to see the datestamps on the files. > > You can zcat the oldest one, and pipe that through head, to see the > oldest entries in the oldest file. That'll tell you where your cutoff > point is, more precisely than the datestamps (which will tell you the > end of each individual file, but not the beginning). Yes, thanks... So turns it out to be only just May 2019 the cutoff point... rodolfo
Re: About /var/log/dpgk.log
Greg Wooledge writes: > On Mon, Jul 27, 2020 at 07:06:47PM +0000, Rodolfo Medina wrote: >> Just so simple. Now, I want to know when libiec61883-dev:i386 was installed >> into my system. To do so, I did: >> >> $ zgrep libiec61883-dev:i386 dpkg.log* >> dpkg.log:2020-07-23 08:07:12 status unpacked libiec61883-dev:i386 1.2.0-3 >> dpkg.log:2020-07-23 08:07:12 configure libiec61883-dev:i386 1.2.0-3 >> dpkg.log:2020-07-23 08:07:12 status unpacked libiec61883-dev:i386 1.2.0-3 >> dpkg.log:2020-07-23 08:07:13 status half-configured libiec61883-dev:i386 >> 1.2.0-3 >> dpkg.log:2020-07-23 08:07:13 status installed libiec61883-dev:i386 1.2.0-3 >> >> In the output there isn't any `install' item... How come...? > > Most likely, because your oldest logs have been removed already. Must be so because $ zgrep "2018.*.install " /var/log/dpkg* gives no output and so with 2017, 2016 and 2015, whereas for 2019 and 2020 there is output... rodolfo
Re: Mencoder and ffmpeg
Thomas Amm writes: > On Sat, 2020-07-25 at 18:39 +0000, Rodolfo Medina wrote: >> Hi all. >> >> I wanted to capture my webcam streaming and audio using ffmpeg but >> banged >> against `a sea of troubles': sync problems, video freezing, video >> stuttering, >> background noise, choose of one format rather than other... Mencoder >> instead >> at once easily, with: >> >> $ mencoder tv:// -tv >> driver=v4l2:width=640:height=480:device=/dev/video0:forceaudio:alsa:ad >> evice=hw.1,0 -ovc lavc -oac mp3lame -lameopts cbr:br=64:mode=3 -o >> webcam.avi >> >> did perfectly the job. But Mencoder is hardly ever used compared with >> ffmpeg... >> >> I wonder why so much difference in this case between the two >> respective >> behaviours and wish to know what you listers think about all that... >> >> thanks for any help >> >> cheers >> >> rodolfo >> > > Mencoder basically uses the same libraries as ffmpeg (and a few more, > IIRC). Having used both for years for standard (ripping, replaying, > recencoding) tasks as well as for somewhat exotic stuff like streaming > video sources from gadgets live into VJ mixers using all kind of filter > in between I would say that mencoder is the app of choice if it gets the > job done because it has much simpler options. > FFMPEG comes into play whenever simpler options fail. As you noticed > there are more options than anyone could memorize trying to cover even > the most exotic use-cases. > Your command line, BTW, looks very much like my standard section in > .mplayer/config for live streaming/encoding from a webcam. I'd suppose > reading the extra HTML-doc for mplayer. It's a relatively easy read. > Getting into FFMPEG is certainly worth it, too - if you have specific > needs. Thanks... I've always only used ffmpeg but now after this my last experience I'm interested in learning to use mencoder as well... But it seems to me that the real problem with it is the lack of support... I recently wrote to mplayer mailing list with no answer, whereas mencoder specific mailing list looks inactive with its 3 years ago last post... rodolfo
Re: About /var/log/dpgk.log
David Wright writes:
> I don't know why you'd want to learn bash scripting at
> root's command line, but if you insist, please add -s
> after the word aptitude.
No, certainly, my fault... I just did:
$ zgrep "2020-07-23.*.install " /var/log/dpkg.log* | awk '{ print $4 }' | tr
'\n' ' '
and then copied and pasted the output as argument of `# aptitude purge'...
Just so simple. Now, I want to know when libiec61883-dev:i386 was installed
into my system. To do so, I did:
$ zgrep libiec61883-dev:i386 dpkg.log*
dpkg.log:2020-07-23 08:07:12 status unpacked libiec61883-dev:i386 1.2.0-3
dpkg.log:2020-07-23 08:07:12 configure libiec61883-dev:i386 1.2.0-3
dpkg.log:2020-07-23 08:07:12 status unpacked libiec61883-dev:i386 1.2.0-3
dpkg.log:2020-07-23 08:07:13 status half-configured libiec61883-dev:i386 1.2.0-3
dpkg.log:2020-07-23 08:07:13 status installed libiec61883-dev:i386 1.2.0-3
In the output there isn't any `install' item... How come...?
thanks,
rodolfo
Re: About /var/log/dpgk.log
The Wanderer writes:
> On 2020-07-27 at 09:56, Rodolfo Medina wrote:
>
>> The Wanderer writes:
>>
>>> On 2020-07-27 at 08:53, Rodolfo Medina wrote:
>
>>>> But audacity is installed on my Debian box since months... How can it
>>>> depend on a package installed a few days ago...?
>>>
>>> My guess would be that this is about architecture differences.
>>>
>>> What the install line from above indicates was installed on the 23rd is
>>> the i386 version of liblilv-0-0. I suspect that the amd64 version was
>>> already installed. The amd64 version of audacity depends on the amd64
>>> version of this library, and the i386 version of audacity almost
>>> certainly depends on the i386 version of this library.
>>>
>>> Try
>>>
>>> # aptitude purge liblilv-0-0:i386
>>>
>>> and see what that gives you.
>>
>> Your guess seems to be true:
>>
>> # aptitude purge liblilv-0-0:i386
>> The following packages will be REMOVED:
>> liblilv-0-0:i386{p} libserd-0-0:i386{u} libsord-0-0:i386{u}
>> libsratom-0-0:i386{u}
>> 0 packages upgraded, 0 newly installed, 4 to remove and 192 not upgraded.
>> Need to get 0 B of archives. After unpacking 394 kB will be freed.
>> Do you want to continue? [Y/n/?]
>>
>> , so it's also important that appendix `:i386'. Now, I want to remove all
>> tha packages I installed on last july 23th. To do so, I do:
>>
>> $ grep "2015-12-19.*.install " /var/log/dpkg.log | awk '{ print $4 }' | cut
>> -d: -f1 | tr '\n' ' '
>>
>> How can I modify the above command so to include - when it is present - also
>> that important suffix?
>
> Drop the '| cut -d: -f1' part. That explicitly gets rid of the suffix.
> As far as I can tell from trivial testing, the resulting package list is
> in the correct syntax to be passed to apt-get or aptitude for removal.
Unfortunately,
root@lenovo:~# aptitude purge "2020-07-23.*.install " /var/log/dpkg.log | awk
'{ print $4 }' | tr '\n' ' '
Unable to apply some actions, aborting
information... information... package root@lenovo:~#
Strange, because:
$ grep "2020-07-23.*.install " /var/log/dpkg.log | awk '{ print $4 }' | tr '\n'
' '
xml-core:all docutils-common:all docutils-doc:all libimagequant0:amd64
libjs-sphinxdoc:all python-alabaster:all python-asn1crypto:all
python-babel-localedata:all python-tz:all python-babel:all python-certifi:all
python-cffi-backend:amd64 python-enum34:all python-ipaddress:all
python-cryptography:amd64 python-roman:all python-docutils:all python-idna:all
python-imagesize:all python-markupsafe:amd64 python-jinja2:all
python-olefile:all python-openssl:all python-pyparsing:all python-packaging:all
python-pil:amd64 python-pygments:all python-urllib3:all python-requests:all
python-typing:all sphinx-common:all python-sphinx:all nasm:amd64 yasm:amd64
cmake-data:all libcurl4:amd64 librhash0:amd64 libuv1:amd64 cmake:amd64
libchromaprint-tools:amd64 libchromaprint-dev:amd64 frei0r-plugins-dev:amd64
libunistring-dev:amd64 libunbound8:amd64 libgnutls-dane0:amd64 libopts25:amd64
gnutls-bin:amd64 libgmpxx4ldbl:amd64 libgmp-dev:amd64 libgnutlsxx28:amd64
libidn2-dev:amd64 libp11-kit-dev:amd64 libtasn1-6-dev:amd64 nettle-dev:amd64
libgnutls28-dev:amd64 libtasn1-doc:all libdpkg-perl:all
libfile-fcntllock-perl:amd64 pkg-config:amd64 ladspa-sdk:amd64 aom-tools:amd64
libaom-dev:amd64 libserd-0-0:i386 libsord-0-0:i386 libsratom-0-0:i386
liblilv-0-0:i386 libserd-dev:amd64 libsord-dev:amd64 lv2-dev:amd64
libsratom-dev:amd64 liblilv-dev:amd64 libraw1394-dev:amd64
libiec61883-dev:amd64 libraw1394-tools:amd64 libraw1394-11:i386
libiec61883-0:i386 libraw1394-dev:i386
Maybe all those `:all'...? Then get cut off only them?
rodolfo
Re: About /var/log/dpgk.log
The Wanderer writes:
> On 2020-07-27 at 08:53, Rodolfo Medina wrote:
>
>> The Wanderer writes:
>>
>>> On 2020-07-27 at 08:15, Rodolfo Medina wrote:
>
>>>
>>> That log message means that at 08:02:37 on July 23rd, 2020, the computer
>>> went from not having any i386-architecture version of liblilv-0-0
>>> installed at all to having version 0.24.2~dfsg0-2 installed.
>>>
>>> The "" is the version which was installed *before* dpkg took
>>> action. The field after that is the version which was installed *after*
>>> dpkg took action. (Or maybe "was to be"; I don't know what gets logged
>>> in the case where the install fails, et cetera.)
>>
>> Clear now, thanks...
>>
>> Now, when I try to remove liblilv-0-0, Debian warns me that audacity depends
>> on it:
>>
>> # aptitude purge liblilv-0-0
>> The following packages will be REMOVED:
>> liblilv-0-0{p}
>> 0 packages upgraded, 0 newly installed, 1 to remove and 192 not upgraded.
>> Need to get 0 B of archives. After unpacking 132 kB will be freed.
>> The following packages have unmet dependencies:
>> audacity : Depends: liblilv-0-0 (>= 0.16.0~dfsg0) but it is not going to be
>> installed
>>
>>
>> But audacity is installed on my Debian box since months... How can it
>> depend on a package installed a few days ago...?
>
> My guess would be that this is about architecture differences.
>
> What the install line from above indicates was installed on the 23rd is
> the i386 version of liblilv-0-0. I suspect that the amd64 version was
> already installed. The amd64 version of audacity depends on the amd64
> version of this library, and the i386 version of audacity almost
> certainly depends on the i386 version of this library.
>
> Try
>
> # aptitude purge liblilv-0-0:i386
>
> and see what that gives you.
Your guess seems to be true:
# aptitude purge liblilv-0-0:i386
The following packages will be REMOVED:
liblilv-0-0:i386{p} libserd-0-0:i386{u} libsord-0-0:i386{u}
libsratom-0-0:i386{u}
0 packages upgraded, 0 newly installed, 4 to remove and 192 not upgraded.
Need to get 0 B of archives. After unpacking 394 kB will be freed.
Do you want to continue? [Y/n/?]
, so it's also important that appendix `:i386'. Now, I want to remove all tha
packages I installed on last july 23th. To do so, I do:
$ grep "2015-12-19.*.install " /var/log/dpkg.log | awk '{ print $4 }' | cut
-d: -f1 | tr '\n' ' '
How can I modify the above command so to include - when it is present - also
that important suffix?
thanks
rodolfo
Re: About /var/log/dpgk.log
The Wanderer writes:
> On 2020-07-27 at 08:15, Rodolfo Medina wrote:
>
>> writes:
>>
>>> On Sat, Jul 25, 2020 at 10:54:56PM +0200, Sven Joachim wrote:
>>>
>>> [...]
>>>
>>>> It's mentioned in the dpkg manpage, search for the --log option
>>>> there.
>>>
>>> :-)
>>>
>>> Thanks, that puts it to rest.
>>>
>>> As always, if everything else fails, read the instructions.
>>
>> Thanks to you all. Then, e.g.,
>>
>> 2020-07-23 08:02:37 install liblilv-0-0:i386 0.24.2~dfsg0-2
>>
>> means that liblilv-0-0 has been installed or not on 2020-07-23? From
>> dpkg manpage, --log option, as I understand, the field with `'
>> should correspond to the installed version, so `' seems to
>> state that it is not installed at all...? If so, what does the
>> `install' action do there...?
>
> That log message means that at 08:02:37 on July 23rd, 2020, the computer
> went from not having any i386-architecture version of liblv-0-0
> installed at all to having version 0.24.2~dfsg0-2 installed.
>
> The "" is the version which was installed *before* dpkg took
> action. The field after that is the version which was installed *after*
> dpkg took action. (Or maybe "was to be"; I don't know what gets logged
> in the case where the install fails, et cetera.)
Clear now, thanks...
Now, when I try to remove liblilv-0-0, Debian warns me that audacity depends on
it:
# aptitude purge liblilv-0-0
The following packages will be REMOVED:
liblilv-0-0{p}
0 packages upgraded, 0 newly installed, 1 to remove and 192 not upgraded.
Need to get 0 B of archives. After unpacking 132 kB will be freed.
The following packages have unmet dependencies:
audacity : Depends: liblilv-0-0 (>= 0.16.0~dfsg0) but it is not going to be
installed
But audacity is installed on my Debian box since months... How can it depend
on a package installed a few days ago...?
rodolfo
Re: About /var/log/dpgk.log
writes: > On Sat, Jul 25, 2020 at 10:54:56PM +0200, Sven Joachim wrote: > > [...] > >> It's mentioned in the dpkg manpage, search for the --log option there. > > :-) > > Thanks, that puts it to rest. > > As always, if everything else fails, read the instructions. Thanks to you all. Then, e.g., 2020-07-23 08:02:37 install liblilv-0-0:i386 0.24.2~dfsg0-2 means that liblilv-0-0 has been installed or not on 2020-07-23? From dpkg manpage, --log option, as I understand, the field with `' should correspond to the installed version, so `' seems to state that it is not installed at all...? If so, what does the `install' action do there...? thanks again, rodolfo
About /var/log/dpgk.log
Hi all... Please what do those occurrences of `' mean in /var/log/dpgk.log just on the right next to some (and some not) of packages names? thanks for any help cheers rodolfo
Mencoder and ffmpeg
Hi all. I wanted to capture my webcam streaming and audio using ffmpeg but banged against `a sea of troubles': sync problems, video freezing, video stuttering, background noise, choose of one format rather than other... Mencoder instead at once easily, with: $ mencoder tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0:forceaudio:alsa:adevice=hw.1,0 -ovc lavc -oac mp3lame -lameopts cbr:br=64:mode=3 -o webcam.avi did perfectly the job. But Mencoder is hardly ever used compared with ffmpeg... I wonder why so much difference in this case between the two respective behaviours and wish to know what you listers think about all that... thanks for any help cheers rodolfo
Re: Ajuda com o Kmymoney
Vc verificou se houve alteração no timezone? Em qui, 11 de jun de 2020 20:49, riesdra escreveu: > Olá a todos, tenho um arquivo do kmymoney que uso ele desde 01/2008 de uns > dias pra cá ao salvar ele esta me dando uma mensagem de erro de data > 27/12/1898. Não sei como criou um lançamento com esta data e valor zero, no > localizar acho ele, mas ali não deixa excluir, ao dar 2 clique ele vai pra > conta mas não carrega o lançamento acho que por causa da data antiga dele, > alguém tem ideia de como posso excluir este lançamento? > > desde já agradeço a todos. > > > > > -- > > > > *Ricardo Libanio* > > > >
Re: Debian com AMD Ryzen
Minha experiência com Dell G3 3590 Kernel 4.19 Debian 10 não está sendo muito boa. Aleatoriamente o sistema trava por completo, podendo mexer só o mouse, e só volta a funcionar se desligar segurando o power. Pesquisei e encontrei várias soluções, nenhuma resolveu o problema. Estou usando porque não é sempre que ocorre, mas quando ocorre é uma merda. Estou usando o Cinamon como interface gráfica, talvez seja ele tb, a única coisa que ainda não vi foi isso. Em qui, 21 de mai de 2020 12:24, China escreveu: > Boa tarde. Peguei um notebook Lenovo com processador AMD Ryzen 5 3500. Ele > veio com Windows mas o dono colocou dual boot com Ubuntu, e o Ubuntu tá > travando muito. Lendo um pouco vi que tem novidades no kernel pra > processador AMD, mas não consegui colocar o kernel novo no Ubuntu pois eles > não estão mais assinando o kernel. > > Gostaria de saber como está no debian, pois pretendo trocar a distro já > que terei de compilar o kernel então que seja no meu ambiente. Mas decidi > perguntar antes. Se eu após instalar o debian e instalar o kernel novo, > terei problemas pra dar o boot por causa de erros de unsigned kernel? > Poderei baixar um kernel já compilado da unstable? > > Deve ter uns 10 anos que não compilo kernel... >
Re: onde está a comunidade Debian
Acontece que a lista é algo oficial do projeto Debian, e ficam armazenados histórico de todas as listas oficiais, acredito que usem a mesma para outros fins também. Se formos para outros meios de comunicação acho que já ficará difícil o time oficial ter um histórico dos aconteciementos. Em qui., 23 de abr. de 2020 às 16:14, Paulo escreveu: > Só complementando um pouco. > > Falta estar no meetup.com, eventbrite.com ou sympla.com.br ;) > > Mesmo que seja coisas para iniciantes. > > Que tal um grupo do Debian numa destas plataformas, ou em alguma outra > similar? > > Att, > > Paulo > > > > Em 23/04/2020 15:24, Leandro Guimarães Faria Corcete DUTRA escreveu: > > 23 avr 2020 14:31 −3, Sinval Júnior: > >> A comunidade de desenvolvimento, Python, C, PHP ainda usa bastante > >> listas de discussão. > > Se não me engano o Linus Torvalds disse que não vê substituição para o > > correio eletrônico. > > > > > >
Re: onde está a comunidade Debian
To aqui, calado porém quieto :) hehehehe Em qui., 23 de abr. de 2020 às 15:31, Paulo escreveu: > É em partes em concordo com o Torvalds e em partes discordo. > > Tem vantagens e desvantagens para o e-mail. > > E para outras plataformas tb (Whats, Telegram, Slack, ) > > Algumas são inviáveis para se compor um texto grande, outras não tem uma > busca descente, outras mais atrapalham que ajudam e assim vai. > > Mas o povo tá aqui vivo da silva, só ninguém perguntou nada ;) > > Foi alguém perguntar que despertou o gigante (parece propaganda de > faculdade ou remédio), k > > > Att, > > Paulo > > > Em 23/04/2020 15:24, Leandro Guimarães Faria Corcete DUTRA escreveu: > > 23 avr 2020 14:31 −3, Sinval Júnior: > >> A comunidade de desenvolvimento, Python, C, PHP ainda usa bastante > >> listas de discussão. > > Se não me engano o Linus Torvalds disse que não vê substituição para o > > correio eletrônico. > > > > > >
Re: udev 243-5
Por isso que eu tava pegando esse problema de travamento, até troquei o teclado e continuou a mesma coisa. Vlw galera! Em qui, 14 de nov de 2019 08:21, Gunther Furtado escreveu: > > Em 14/11/2019 09:13, Leandro Guimarães Faria Corcete DUTRA escreveu: > > > > > > Le 14 novembre 2019 07:19:11 GMT-03:00, Gunther Furtado > a écrit : > >> > >> Não achei bugreport! > > > > Faça-o! > > > > > (Estou tentando.. é meio complicadinho sem teclado, vou tentar com (ssh > -X)) > > Atualizações: > 1. logando no VT1 e rodando startx também trava mouse e teclado. > 2. a versão do backport roda certinho (242-8~bpo10+1) > > > dica: > > crie o arquivo /etc/apt/preferences.d/99udev com o seguinte conteúdo: > > Package: udev > Pin: version 243-5 > Pin-Priority: -1 > > > At.te, > > > -- > > "Mas, afinal, só as criaturas que nunca > escreveram cartas de amor é que são ridículas." Fernando Pessoa > > Gunther Furtado > Curitiba - Paraná - Brasil > gunfurt...@gmail.com > >
Re: Curiosidade
Olá Luiz, esses endereços que aparecem são sites chamados pelo próprio site que você está entrando. Quando você entra no site da UOL, por exemplo, dentro do site da UOL existem banners de propaganda, imagens de outros sites, e etc. Para pegar essas imagens ou propagandas o browser automaticamente faz requisições para eles. Isso é normal. Algumas páginas usam serviços de estatísticas ou analytics, o akamai, por exemplo, o google. Existe um código na página que você está abrindo que faz essa busca. Enfim, tentei resumir bem, espero que tenha ajudado. Att. Rodolfo Azevedo Em sex, 20 de set de 2019 às 17:22, luiz gil escreveu: > Bom tarde a todos amigos. > > Como um modesto usuario do Linux (debian-buster) tenho sempre notado que > quando navego na internet em particular alguns sites em especial, no rodape > do browser (mozilla-firefox) canto esquerdo, surgem durante as comunicacoes > com outros servidores alguns enderecos como www.google.com, facebook, > outros nomes mais incompreensiveis dando uma sensacao de que toda minha > comunicacao esta sendo pre direcionada como se fosse uma monitoracao. > > Caso alguns dos senhores possa comentar, agradeco de antemao o > esclarecimento. > > Abracos > > Luiz Carlos > > >
Re: mplayer won't play m4a
"Thomas Schmitt" writes: > i wrote: >> > All this riddling just because of silent rejection of oversized mail. > > Rodolfo Medina wrote: >> Yes... :-( > > At least it was served with interesting red herrings. Interesting, yes... > Now you only need to find a way to publish your attachment. Thanks indeed for helping... ;-) Cheers, Rodolfo
Re: mplayer won't play m4a
"Thomas Schmitt" writes: > Hi, > > Rodolfo Medina wrote: >> I can see all my recent messages through gmane.news server in >> linux.debian.user group... > > Here i see none of you between > > from : Andrei POPESCU > date : Mon, 26 Aug 2019 21:10:02 +0200 > subject: Re: mplayer won't play m4a > > and > > from : Rodolfo Medina > date : Mon, 02 Sep 2019 13:30:02 +0200 > subject: test > > The message which i got by Cc: does not show up in the newsgroup. Yes, all apart from those... >> Hi all... I'm sending the present reply to the above message but without >> that large attachment included in my previous failed attempts... > > Duh. > All this riddling just because of silent rejection of oversized mail. Yes... :-( Rodolfo
Re: mplayer won't play m4a
Andrei POPESCU writes: > On Sb, 24 aug 19, 13:26:00, Rodolfo Medina wrote: >> >> What missing, what should I install...? If my two-minutes-ago full-upgrade >> ok, >> I should be running Stable: Debian 10. > > Instead of guessing you could show the output of 'apt policy' ;) > > The output of this command might also help to find the cause for your > troubles: > > aptitude search '!~ODebian' > > (the quotes are important) > > > Kind regards, > Andrei Hi all... I'm sending the present reply to the above message but without that large attachment included in my previous failed attempts... Let's see if it's delivered to the list... Rodolfo
Re: test, Was: mplayer won't play m4a
"Thomas Schmitt" writes: > Hi, > > Curt wrote: >> I guess I wasn't precise enough. news.gmane.org is the news server. >> gmane.linux.debian.user is this newsgroup. I am here. > > So what you post to gmane.linux.debian.user ends up on debian-user > mailing list too ? Of course, that's the way I post to the list. > (I can distinguish a typical server name from a typical group name, btw.) > > [...] > > Rodolfo could make an attempt without the weighty attachment. > Maybe all the rest is just a red herring. I'm doing so now. > Is there a limit for attachments published for gmane.linux.debian.user ? The problem might be just that...! I'll test it now. Rodolfo
Re: test, Was: mplayer won't play m4a
"Thomas Schmitt" writes: > Curt wrote: >> I post to the group via news.gmane.org with a NNTP client. > > Can you see gmane.linux.debian.user there ? > > If yes: Are there recent messages from Rodolfo Medina ? > E.g. this one: > > From: Rodolfo Medina > Subject: Re: mplayer won't play m4a > Date: Mon, 02 Sep 2019 13:15:24 + > Message-ID: <87r24yx2j7.fsf@lenovo> > > (It might have suffered silent rejection due to its 1 MB attachment.) I can see all my recent messages through gmane.news server in linux.debian.user group... Rodolfo
Re: test, Was: mplayer won't play m4a
"Thomas Schmitt" writes: > I have a new theory. > > One header is missing: > > To: ... Right... Whereas all my previous messages on this list do have that header... So what would your theory be...? Thanks, Rodolfo
Re: test, Was: mplayer won't play m4a
"Thomas Schmitt" writes: > Hi, > > The Wanderer wrote: >> Rodolfo posted a copy of that message as an attachment, just now, so >> that should be check-able. I don't see anything quite odd just at a glance. > > Yes. Looks totally normal. > > >> Here's an attempt to reply to the message which Rodolfo Medina has >> reported having trouble replying to. Has anyone else tried to reply to >> this message, prior to this? > > I did, creating the sub-thread "Re: test, Was: mplayer won't play m4a". > Same as with your attempt: no problems. And Rodolfo can reply to our > follow-up mails in the thread. > > It is not yet proven whether the strange In-Reply-To: header content > is to blame. But i see it in my Cc: of the failed attempt of Rodolfo > to follow-up to Andrei POPESCU's mail with id > 20190826190505.zldub4tzker6am7d@localhost. > The successful attempts to our recent mails don't have this header. Every time I'm sending a mail message from my Gnus system (even jus now), it says something as: The Message-ID looks strange: "<87sgpetvv7.fsf@lenovo>". Really post? (y or n) n Maybe this means something... Maybe Andrei has some sort of anti-spam system that prevents strange IDs to reply to his posts...? Rodolfo
Re: mplayer won't play m4a
The Wanderer writes: > On 2019-08-26 at 15:05, Andrei POPESCU wrote: > >> On Sb, 24 aug 19, 13:26:00, Rodolfo Medina wrote: >> >>> What missing, what should I install...? If my two-minutes-ago full-upgrade >>> ok, >>> I should be running Stable: Debian 10. >> >> Instead of guessing you could show the output of 'apt policy' ;) >> >> The output of this command might also help to find the cause for your >> troubles: >> >> aptitude search '!~ODebian' >> >> (the quotes are important) > > Here's an attempt to reply to the message which Rodolfo Medina has > reported having trouble replying to. Has anyone else tried to reply to > this message, prior to this? Attempt successful... I've been trying many times to reply to the same message with no success... Really strange... Rodolfo
Re: test, Was: mplayer won't play m4a
The Wanderer writes: > On 2019-09-02 at 11:21, Rodolfo Medina wrote: > >> "Thomas Schmitt" writes: >> >>> Hi, >>> >>> Rodolfo Medina wrote: >>>> ...And I'm replying now to the above message from Thomas... >>> >>> This one has no In-Reply-To header. >>> >>> I don't have the mail by Andrei POPESCU in my mailbox, to which you >>> tried to reply with that header line. >>> https://lists.debian.org/debian-user/2019/08/msg01294.html >>> >>> A mail from him from a different thread looks unsuspicious, header-wise. >> >> It remains anyway a mistery, why I'm regularly replying to the present >> thread but can't to the other one... > > Strictly, this isn't even a different thread; it's just another message > in the same thread, with a different Subject line. Yes, right... but also I could reply to the thread named `test', earlier today... > > I don't remember if you've specified: what is the exact message to which > you're unsuccessfully trying to reply? Could you provide an archive link > to it, and/or (better, but more unwieldy) provide the message itself - > including headers - as an attachment or suchlike? All right... Here it is: 90 Description: Binary data Thanks... Rodolfo
Re: test, Was: mplayer won't play m4a
"Thomas Schmitt" writes: > Hi, > > Rodolfo Medina wrote: >> ...And I'm replying now to the above message from Thomas... > > This one has no In-Reply-To header. > > I don't have the mail by Andrei POPESCU in my mailbox, to which you > tried to reply with that header line. > https://lists.debian.org/debian-user/2019/08/msg01294.html > > A mail from him from a different thread looks unsuspicious, header-wise. It remains anyway a mistery, why I'm regularly replying to the present thread but can't to the other one... Rodolfo
Re: test, Was: mplayer won't play m4a
"Thomas Schmitt" writes: > Hi, > > this is a test whether i can reply to the thread "mplayer won't play m4a". > It looks like Rodolfo Medina, the thread starter cannot. > > See > https://lists.debian.org/debian-user/2019/09/msg00053.html > > In my recent mail to that thread i announced to reply to > Message-Id: 87h8664rvb.fsf@lenovo rather than 87blwe4rd8.fsf@lenovo. > The latter is the id of the previous mail in the thread. > > This one should show up as follow-up to > https://lists.debian.org/debian-user/2019/08/msg01171.html > with subject > Re: test, Was: mplayer won't play m4a > > > Have a nice day :) > > Thomas ...And I'm replying now to the above message from Thomas... Rodolfo
Re: test
"Thomas Schmitt" writes: > Hi, > > Rodolfo Medina wrote (twice ?): >> Done. Let's see... Yes, twice, sorry, a sort of non-delivered-messages fear... ;-) > I received the direct mail > > Subject: Re: mplayer won't play m4a > Date: Mon, 02 Sep 2019 13:15:24 + > Message-ID: <87r24yx2j7.fsf@lenovo> > References: <87h8664rvb.fsf@lenovo> > <20190826190505.zldub4tzker6am7d@localhost> > In-Reply-To: <20190826190505.zldub4tzker6am7d@localhost> (Andrei POPESCU's > message of "Mon, 26 Aug 2019 22:05:05 +0300") > > without debian-user mail headers at > Mon Sep 2 15:59:16 CEST 2019 > but GMX had it ready in the remote mailbox since 15:15:35 +0200. > > The expected copy via debian-user did not show up within an hour. > Neither in my mailbox nor at > https://lists.debian.org/debian-user/2019/09/threads.html > > The additional text in In-Reply-To: looks unusual. > There are no In-Reply-To: in Rodolfo Medina's mail to thread "test". Indeed, strange... > Is there any explanation for this difference ? > > -- > > So i will test myself by replying to Message-Id: 87h8664rvb.fsf@lenovo > as of > https://lists.debian.org/debian-user/2019/08/msg01171.html > with Cc: rodolfo.med...@gmail.com. Thanks, Rodolfo
Re: test
"Thomas Schmitt" writes: > Hi, > > Rodolfo Medina wrote: >> Yes, that's the strange thing: I've been added a reply to that thread, many >> times, but it was not delivered to the list neithere is being delivered nor >> it will even now... > > And in the next mail: >> Sorry, `I've been adding' > > Try again. > Add Cc: to scdbac...@gmx.net and to yourself. > Then let's see what shows up where. Done. Let's see... > (Did you get both copies of my previous mail ? > One via debian-user, one by Cc: rodolfo.med...@gmail.com ?) Yes, I did. > Have a nice day :) Thanks, cheers Rodolfo
Re: test
The Wanderer writes: > On 2019-09-02 at 09:07, Thomas Schmitt wrote: > >> Hi, >> >> Rodolfo Medina wrote: >>> Yes, that's the strange thing: I've been added a reply to that thread, many >>> times, but it was not delivered to the list neithere is being delivered nor >>> it will even now... >> >> And in the next mail: >>> Sorry, `I've been adding' >> >> Try again. >> Add Cc: to scdbac...@gmx.net and to yourself. >> Then let's see what shows up where. > > This seems worth trying, but... > >> (Did you get both copies of my previous mail ? >> One via debian-user, one by Cc: rodolfo.med...@gmail.com ?) > > ...he wouldn't have gotten both, anyway, due to a known Gmail > misfeature. > > If Gmail receives a message, and sees that you already have a copy of a > message (determined, as far as I can tell, exclusively by Message-ID), > it will basically discard the incoming message as being redundant. I usually read and send messages from and to the present list using my Emacs Gnus newsagent, via gmane.news... So I actually received in Gmail just one copy of Thomas' message... Rodolfo
Re: test
"Thomas Schmitt" writes: > Hi, > > Rodolfo Medina wrote: >> Yes, that's the strange thing: I've been added a reply to that thread, many >> times, but it was not delivered to the list neithere is being delivered nor >> it will even now... > > And in the next mail: >> Sorry, `I've been adding' > > Try again. > Add Cc: to scdbac...@gmx.net and to yourself. > Then let's see what shows up where. Done. Let's see... > (Did you get both copies of my previous mail ? > One via debian-user, one by Cc: rodolfo.med...@gmail.com ?) Yes, I did. > Have a nice day :) Thanks, cheers Rodolfo
Re: test
Rodolfo Medina writes: > "Thomas Schmitt" writes: > >> Rodolfo Medina wrote: >>> > I've been sending many times a message to the present group but it >>> > doesn't seem to have been delivered... >> >> Gene Heskett wrote: >>> your name has not previously been received here. >> >> The list archive has >> >> "mplayer won't play m4a" >> Date: Sat, 24 Aug 2019 13:26:00 + >> https://lists.debian.org/debian-user/2019/08/msg01170.html >> Date: Sat, 24 Aug 2019 13:36:51 + >> https://lists.debian.org/debian-user/2019/08/msg01171.html >> >> After that, the "test" message is the first and only in september 2019. > > > Yes, that's the strange thing: I've been added a reply to that thread Sorry, `I've been adding' Rodolfo
Re: test
"Thomas Schmitt" writes: > Rodolfo Medina wrote: >> > I've been sending many times a message to the present group but it >> > doesn't seem to have been delivered... > > Gene Heskett wrote: >> your name has not previously been received here. > > The list archive has > > "mplayer won't play m4a" > Date: Sat, 24 Aug 2019 13:26:00 + > https://lists.debian.org/debian-user/2019/08/msg01170.html > Date: Sat, 24 Aug 2019 13:36:51 + > https://lists.debian.org/debian-user/2019/08/msg01171.html > > After that, the "test" message is the first and only in september 2019. Yes, that's the strange thing: I've been added a reply to that thread, many times, but it was not delivered to the list neithere is being delivered nor it will even now... Thanks, Rodolfo
test
I've been sending many times a message to the present group but it doesn't seem to have been delivered... Rodolfo
Re: mplayer won't play m4a
Rodolfo Medina writes: > Hi all... > >>From mplayer.user mailing list I got no answer... > > $ playfile fantasia_a_due-prova_13_agosto.m4a > MPlayer 1.3.0 (Debian), built with gcc-8 (C) 2000-2016 MPlayer Team > do_connect: could not connect to socket > connect: No such file or directory > Failed to open LIRC support. You will not be able to use your remote control. > > Playing fantasia_a_due-prova_13_agosto.m4a. > libavformat version 58.20.100 (external) > Mismatching header version 58.12.100 > libavformat file format detected. > [aac @ 0x7fbe56196e00]Could not find codec parameters for stream 0 (Audio: > aac, > 0 channels, fltp): unspecified sample rate > Consider increasing the value for the 'analyzeduration' and 'probesize' > options > [lavf] stream 0: audio (aac), -aid 0 > Load subtitles in ./ > == > Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders > libavcodec version 58.35.100 (external) > Mismatching header version 58.18.100 > Ignoring broken container sample rate for AAC with SBR > Unknown/missing audio format -> no sound > ADecoder init failed :( > Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding) > Could not get audio data! > ADecoder init failed :( > ADecoder init failed :( > Opening audio decoder: [spdif] libavformat/spdifenc audio pass-through > decoder. > [spdif @ 0x7fbe56196e00]Codec 0 is not implemented. Update your FFmpeg version > to the newest one from Git. If the problem still occurs, it means that your > file has a feature which has not been implemented. > This codec is not supported by spdifenc. > ADecoder init failed :( > ADecoder init failed :( > Cannot find codec for audio format 0x4134504D. > Audio: no sound > Video: no video > > > Exiting... (End of file) > > > What missing, what should I install...? If my two-minutes-ago full-upgrade > ok, > I should be running Stable: Debian 10. > > Thanks for any help, > > Rodolfo ...On another PC of mine, with Stretch, the same file is correctly played... Rodolfo
mplayer won't play m4a
Hi all... >From mplayer.user mailing list I got no answer... $ playfile fantasia_a_due-prova_13_agosto.m4a MPlayer 1.3.0 (Debian), built with gcc-8 (C) 2000-2016 MPlayer Team do_connect: could not connect to socket connect: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing fantasia_a_due-prova_13_agosto.m4a. libavformat version 58.20.100 (external) Mismatching header version 58.12.100 libavformat file format detected. [aac @ 0x7fbe56196e00]Could not find codec parameters for stream 0 (Audio: aac, 0 channels, fltp): unspecified sample rate Consider increasing the value for the 'analyzeduration' and 'probesize' options [lavf] stream 0: audio (aac), -aid 0 Load subtitles in ./ == Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 58.35.100 (external) Mismatching header version 58.18.100 Ignoring broken container sample rate for AAC with SBR Unknown/missing audio format -> no sound ADecoder init failed :( Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding) Could not get audio data! ADecoder init failed :( ADecoder init failed :( Opening audio decoder: [spdif] libavformat/spdifenc audio pass-through decoder. [spdif @ 0x7fbe56196e00]Codec 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. This codec is not supported by spdifenc. ADecoder init failed :( ADecoder init failed :( Cannot find codec for audio format 0x4134504D. Audio: no sound Video: no video Exiting... (End of file) What missing, what should I install...? If my two-minutes-ago full-upgrade ok, I should be running Stable: Debian 10. Thanks for any help, Rodolfo
Re: updmap-user: command not found
David Wright writes: > On Mon 29 Jul 2019 at 19:56:32 (-), Curt wrote: >> On 2019-07-29, wrote: >> > >> > (this is an oldstable Debian). >> > >> > Perhaps the thing you're looking for is simply spelt "updmap"? >> >> >> curty@einstein:~$ apt-cache show texlive-base | grep -i updmap >> updmap-map -- >> >> So simply spelt 'updmap-map', I guess. > > On stretch, it seems it's just updmap Thanks all, that seems to be the case... Rodolfo
updmap-user: command not found
Hi all. On my Debian Stretch box, the `updmap-user' command is declared `not found' although the package texlive-base is installed. Why? Please help. Thanks in advance, Rodolfo
Re: How to have password shown?
writes: > On Wed, Jul 03, 2019 at 01:34:00PM +0000, Rodolfo Medina wrote: >> Jonas Smedegaard writes: >> >> > Quoting Rodolfo Medina (2019-07-03 14:42:13) >> >> >> Thanks indeed... He will do... making errors in typing a blind password >> and re-typing it again and again till it's all right... ;-) > > You can set the paasword to empty: > > sudo passwd -d > > Then, he'd just have to enter his user name and is logged in > without any password typing. Thanks, if he should find the blind password really difficult, that's what I'll do... Rodolfo
Re: How to have password shown?
Renato Gallo writes: > http://www.eldy.eu/software/download/ > > Renato Gallo Well, thanks, but... no, I just want him to use it the same way I do... in the clever Linux and Debian Linux manner that we all know and appreciate.. Making things too easy is not always a good idea... Cheers, Rodolfo
Re: How to have password shown?
Brian writes: > On Wed 03 Jul 2019 at 13:34:00 +0000, Rodolfo Medina wrote: > >> >> Thanks indeed... He will do... making errors in typing a blind password >> and re-typing it again and again till it's all right... ;-) > > Most people mistype at some time; have you considered why your father > might be doing it? Logins with convoluted or complex passwords do not > help, so consider 12345678 or the date of his birthday. I'm tempted to > say that either would reduce mishaps. Thanks for your suggestion... No, it's very simple and familiar with him... it's just that he's at his really first experiences with a computer machine and a computer keyboard... He passes most of his time in front of TV and maybe using a computer may help him and be interesting for him... Rodolfo
