Re: how to find bad blocks
Hi, On Tue, 09 Feb 2010 18:44:02 +0100 Vadkan Jozsef jozsi.avad...@gmail.com wrote: We have a samsung hdd, that keeps falling out of raid, but there are no bad blocks on it, according to badblocks prog. Did you use the write scan? (parameter -w for destructive write, -n for non-destructive write -- both cannot be used on mounted devices). Cheers Stephan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: ntfs mount errors
On Fri, 3 Aug 2007 20:51:50 -0700 Andrew Sackville-West [EMAIL PROTECTED] wrote: On Fri, Aug 03, 2007 at 11:17:21PM -0400, Phill Atwood wrote: Success. Although I can't say that I really understand. Setting umask=0222 in the /etc/fstab file did the trick. I don't understand why mounting a ro partition to a directory with just write permissions would work. 0544 or 0555 seemed the more logical thing to try... (...) So I'm not sure how that translates to the first digit since i'm sure you don't want a perm to come out 7555 using umask of 0222 but maybe someone can enlighten Well, wikipedia says ;), the bitwise-inverted umask is bitwise ANDed with the *default full permission*, i.e. 666 for files and 777 for dirs. This should mean, 0666 and 0777, if I am understanding it right (see interpretation for missing digits in chmod(1)). Thus: 000 110 110 110 AND not(000 010 010 010) = 000 110 110 110 AND 111 101 101 101 = 0444 For dirs, the result is 0555. c) Even after this success, dmesg shows: NTFS volume version 3.1. NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. (...) i see that a lot and never have any problems. FWIW. but avoid writing in ntfs if you can. That's really strange ... but I'm pretty sure that's not debian-specific (as I found this on forums for all kinds of distros). Another thing: If you also need write access onto ntfs, and want read access onto compressed files, then the ntfs-3g driver might be interesting for you. For newbies however, it might not be that easy to install... you need to make a package for stable yourself. On the other hand, if you'd need it, I can just do an update/recompile here on my system and send the resulting package to you via email. is it in backports? Yep, that's a good hint: ntfs-3g ver 1.516 (slightly outdated) is available if you add the line: deb http://www.backports.org/debian etch-backports main contrib non-free into your /etc/apt/sources.list, do apt-get update, and then install. Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ntfs mount errors
On Tue, 31 Jul 2007 14:26:41 -0400 Phill Atwood [EMAIL PROTECTED] wrote: Further to my problem of not being able to automatically mount my windows xp partition and cd to it as a regular user. from dmesg: NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows. Hi there, I have no information about what was discussed before, but to me this looks like: Boot into windoze. Click on Start-Execute (don't know how this is exactly called on English windoze) or open a command window (cmd.exe). There, type: chkdsk /f . Tell windoze you want it to check the disk at reboot. Reboot into windoze, and let chkdsk repair the disk. Then reboot into linux and see what happens. Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ntfs mount errors
On Tue, 31 Jul 2007 14:26:41 -0400 Phill Atwood [EMAIL PROTECTED] wrote: Further to my problem of not being able to automatically mount my windows xp partition and cd to it as a regular user. from dmesg: NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows. Hi there, I have no information about what was discussed before, but to me this looks like: Boot into windoze. Click on Start-Execute (don't know how this is exactly called on English windoze) or open a command window (cmd.exe). There, type: chkdsk /f . Tell windoze you want it to check the disk at reboot. Reboot into windoze, and let chkdsk repair the disk. Then reboot into linux and see what happens. Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Mozilla 1.4 won't display TT fonts (mozilla-xft installed)
Hi! I've got a woody system; yesterday I decided to compile gtk2.0 v2.2 etc. and mozilla from unstable. Mozilla is now running fine but it won't display truetype fonts (I also cannot select them in the preferences dialog), although I've installed xfstt and have the following lines in /usr/lib/mozilla/defaults/pref/unix.js // TrueType pref(font.FreeType2.enable, true); pref(font.freetype2.shared-library, libfreetype.so.6); // if libfreetype was built without hinting compiled in // it is best to leave hinting off pref(font.FreeType2.autohinted, false); pref(font.FreeType2.unhinted, true); // below a certian pixel size anti-aliased fonts produce poor results pref(font.antialias.min,10); pref(font.embedded_bitmaps.max, 100); pref(font.scale.tt_bitmap.dark_text.min, 64); pref(font.scale.tt_bitmap.dark_text.gain, 0.8); // sample prefs for TrueType font dirs pref(font.directory.truetype.1, /usr/X11R6/lib/X11/fonts/TrueType); pref(font.FreeType2.printing, true); snip /* reject font if accept pattern does not match it... */ pref(print.xprint.font.acceptfontpattern, .*); /* reject font if reject pattern matches it... * Current bans: * - bug 148470 (Ban -dt-* (bitmap!!) fonts from Xprint) * pattern=fname=-dt-.*;scalable=.*;outline_scaled=false;xdisplay=.*;x dpy=.*;ydpy=.*;xdevice=.* */ pref(print.xprint.font.rejectfontpattern, fname=-dt-.*;scalable=.*;outline_scaled=false;xdisplay=.*;xdpy=.*;y dpy=.*;xdevice=.*); the following lines in /etc/mozilla/prefs.js: // TryeType pref(font.FreeType2.enable, true); pref(font.freetype2.shared-library, libfreetype.so.6); pref(font.FreeType2.autohinted, false); pref(font.FreeType2.unhinted, true); pref(font.antialias.min,10); pref(font.directory.truetype.1, /usr/X11R6/lib/X11/fonts/TrueType); and the following lines in /etc/mozilla/mozillarc: MOZILLA_DSP=none USE_GDKXFT=true There is no ~/.mozillarc, so I've got no clue why mozilla doesn't do what I want... Can anyone please give me a hint? TIA, Stephan Hachinger -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Flash player for Konqueror
On Thu, 23 Jan 2003 17:17:05 +0100 Willem-Jan Meijer [EMAIL PROTECTED] wrote: Is there a flash-player for konqueror? If it is, where can I find it? Hi! Take a look at http://packages.debian.org/unstable/web/flashplugin-nonfree.html If you don't run unstable, you can drop me a mail, I'll send you a package compiled for stable. The package will - when installing - download the mozilla/netscape plugin from the macromedia server (or something like that ;) ) and install the plugin; this mozilla/netscape plugin can also be used in konqueror (see configuration.. netscape plugins - you only have to set the right directory and search for netscape plugins). Regards, Stephan Hachinger -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Flash player for Konqueror
On Thu, 23 Jan 2003 17:17:05 +0100 Willem-Jan Meijer [EMAIL PROTECTED] wrote: Is there a flash-player for konqueror? If it is, where can I find it? Hi! Take a look at http://packages.debian.org/unstable/web/flashplugin-nonfree.html If you don't run unstable, you can drop me a mail, I'll send you a package compiled for stable. The package will - when installing - download the mozilla/netscape plugin from the macromedia server (or something like that ;) ) and install the plugin; this mozilla/netscape plugin can also be used in konqueror (see configuration.. netscape plugins - you only have to set the right directory and search for netscape plugins). Regards, Stephan Hachinger -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: aha-2940 scsi controller problem
- Original Message - From: Andraz Sraka [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Sunday, October 06, 2002 4:23 PM Subject: Re: aha-2940 scsi controller problem Are you sure that the controller and drive is properly connected and terminated and that the drive power connector is ok? i believe so, because if not, the controller wouldn't recognize it at the first place while booting (before linux booting), right? Hmm, not necessarily... I once had a broken scsi cable and it produced quite different kind of errors... the drives were neither fully disconnected nor working properly. Regards, Stephan Hachinger -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: download 3.0 CD's?
Hi! For 3.0 (woody), the program jigdo-easy should work (but not for sarge or sid)... you will be guided through the menus quite well, see: http://cdimage.debian.org/~costar/jigdo/ Regards, Stephan On Sun, 29 Sep 2002 10:57:09 -0500 xucaen [EMAIL PROTECTED] wrote: Hi, I am trying to download version 3.0 CD images. I can only do this on a Windows machine because that is where the fast connection is. All the mirrors I go to still only have 2.2. I don't know how the jigdo works or if it is available for Windows. How do I do this? Please reply to [EMAIL PROTECTED] and [EMAIL PROTECTED] thanks you!! Jim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: alsa help needed desperately!
Hi! Hmm, I think the problem is that your alsa channels are *muted* by default and you need a suitable mixer application to change the volume... there also seems to be a mixer setup problem at my machine here *g*, but at least I can use the kde mixer, when oss mixer emulation is loaded (module snd-mixer-oss). Maybe you could try alsamixer from alsa-utils, I think it's even got a little GUI. Note that you'll also need the snd-pcm-oss module if you want to use programs which need the old oss sound system. Regards, Stephan On Sat, 28 Sep 2002 12:25:00 -0500 [EMAIL PROTECTED] (Martin A. Hansen) wrote: ok, i guess i should not use xamixer2 then. (i never have before, but im desperate). anyway you are telling me that xamixer fails of natural causes, so back to the drawing table ... by the way. user is added to group audio: root@homer:/etc# grep audio group audio:x:29:maasha but again, as im trying to get sound to work as root - this should not be relevant (for the time being). martin | xamixer2 uses the 0.4 ALSA API. If your alsa version is 0.9, | that would explain why xamixer failed. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Konqueror slowness
Hi! I have absolutely the same problem, although my kdebase and -libs are self-compiled... I'm already talking about this with Dirk Mueller, one of the kde team. If you don't bother, I'll forward your problem report to him. Regards, Stephan On Thu, 26 Sep 2002 14:30:50 -0500 Mark Roach [EMAIL PROTECTED] wrote: Konqueror takes an extremely long time to load pages on my system compared to mozilla/galeon. Has anyone had a similar problem? I went to theregister in konq and then while it was loading, I lanched galeon, loaded the site and came back and started typing this before konqueror loaded the site (~17 seconds just for the main content area showed up). Reload takes roughly the same amount of time. I don't remember that having been the case in the past, and couldn't find anyone else reporting this problem (everyone always talks about konq being fast). Any thoughts on what I might have done to upset it? I am using the 3.0.3 debs from the kde site. -Mark -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Solved: How to get the ALSA driver to start at boot?
- Original Message - From: Ivo Wever [EMAIL PROTECTED] To: debian-user debian-user@lists.debian.org Sent: Monday, June 17, 2002 1:37 AM Subject: Solved: How to get the ALSA driver to start at boot? Thanks, it worked. I now even have sound under X, even though artsd doesn't start with the option for alsa-compatability. I've yet to figure out why :) Hi! The artsd from libarts-alsa doesn't like alsa 0.5 when the alsa option is activated, I think. If you have alsa 0.5 you'll have to install 0.9.x or so. Or just keep the OSS setting or autodetect ;). And you might have to run /usr/share/doc/alsa-base/examples/snddevices once if you haven't done so yet (creates the alsa devices in /dev). Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: true type fonts won't work...
- Original Message - From: Ronald Verlaan [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Cc: Debian User debian-user@lists.debian.org Sent: Monday, June 17, 2002 9:20 AM Subject: Re: true type fonts won't work... On Sun, 16 Jun 2002, Stephan Hachinger wrote: Hi Stephan, (...) That is exactly what I did! And I have read all howtoos on this subject I guess :P Can it be that something went wrong during compiling kde (with respect to truetype support or something...) ? No, definitely not. If the xfstt server supplies the fonts, they can be used immediately without problems. What does xfstt --sync print out? Can you select the truetype fonts in xfontsel (xbase-clients package)? Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: true type fonts won't work...
- Original Message - From: Ronald Verlaan [EMAIL PROTECTED] To: Peter Whysall [EMAIL PROTECTED] Cc: Debian User Mailinglist debian-user@lists.debian.org Sent: Sunday, June 16, 2002 9:35 PM Subject: Re: true type fonts won't work... On 16 Jun 2002, Peter Whysall wrote: Hi Peter, Any hints? Are you loading the freetype module in /etc/X11/XF86Config-4 ? Yes I did :P Thanx anyway! Hi! Another very easy way is installing xfstt and placing your truetype fonts in /usr/share/fonts/truetype, adding unix:/7100 (besides unix:/7101 for xfs, I think) to the FontPath in XF86Config-4. Then install ttmkfdir and tetex-bin and a package containing mkfontdir (i.e. xutils, I think (again *g*)). Go to the directory /usr/share/fonts/truetype, call the script in the first chapter of this howto: http://www.linuxvoodoo.com/howto/HOWTO/TT-Debian/TT-Debian-5.html , call ttmkfdir fonts.scale , call mkfontdir and look if ./fonts.dir contains the font names ;). Then call xfstt --sync . Your fonts should be available to X now. (after a restart of your X server). Finally, you should make your fonts available for printing (gs), as described in http://www.linuxvoodoo.com/howto/HOWTO/TT-Debian/TT-Debian-4.html ; you should only take care for where your gs Fontmap actually is (I think it's now somewhere else than in /etc, see dpkg -S *Fontmap* for the right location), and change the line xfstt --gslist --sync /etc/gs.Fontmap accordingly. The author of the howto describes, that one should edit the Fontmap file manually afterwards. That's right. If gs cannot find a font in - for example a kde document whcih you want to print - , though, and uses the default font instead, the following way helped at my machine (if I remember correctly): 1) Force printing to ps. 2) Call gs psfile 3) Watch gs output: It will say which font it does not find. 4) Take a look at psfile with an editor and search for the font definition of the font not found - you will find that the spelling differs slightly from the one at your Fontmap or so. 5) Put a new alias in your Fontmap which maps the different spelling to the one you've used in your Fontmap before. Aliases work like this: /Arial/MS-Arial ; means: use previously defined font MS-Arial for Arial, if Arial is requested by a document. (For further information: The whole howto is at: http://www.linuxvoodoo.com/howto/HOWTO/TT-Debian/ ). Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problems installing woody
On Wed, 12 Jun 2002 05:01:31 -0300 Francisco Fialho [EMAIL PROTECTED] wrote: I`m trying to install woody ( Debian 3.0) at an ACER 4300 with Celeron 500 processor, 128 mem, and onboard video (SIS530/620) and network drivers(SIS900)... when I finished my first installation I could ping the local and external network just fine, but I cannot enter in graphic mode. I already did an apt-get install in almost all of the xserver-* that I found...:-/ Hi! First of all, remove all xserver-* packages except xserver-xfree86 (and of course xserver-common) which must be installed. If you don't know at all what to install to get a running X system, just remove the xserver-packages except the both mentioned, and then apt-get install x-window-system (as Bob mentioned). Is this a laptop which you're trying to install Debian on? If yes, then the following could help, if not, read on below the next three paragraphs ;): It is quite normal that X doesn't run on such a machine, because the X driver does not know how to handle a certain part which drives the LCD display or so. But there's a good sis driver under http://www.winischhofer.net/linuxsis630.shtml which solves the problem. I'd first try not to change the kernel (If you don't know what you're doing), but only to install the X driver. Don't get frustrated because there's so much information on the page - the setup instructions which'll probably work for you are in the part: Variant 4: I want to use X without DRI. You'll just have to download the precompiled driver for X4.1 and place it in the directory which is mentioned on the site. Then, you do dpkg-reconfigure xserver-xfree86 at the console and choose the sis driver in the configuration process. Choose a monitor type which can handle the resolution you normally have on your LCD at 60 Hz, and choose the resolution you want to have; choose 16 for the colour depth (or 24 if you desperately need many, many colours ;) ). Now, don't start X immediately! First, edit the /etc/X11/XF86Config-4 file (for example, go to this directory with the file manager mc (apt-get install mc and then just type mc) and select Edit) (if it isn't there, edit the XF86Config file!) as described on the winischhofer site under the link example XF86Config-4. The most important sections are, if I remember correctly: -The Section Monitor: There must not be any Mode Lines, if any is there, delete them (delete lines: F8 key in MC editor). But be careful not to delete the EndSection signature at the end of the monitor section ;). VertRefresh must be set to 50-75, HorizSync to 30-90. ATTENTION: If this isn't set correctly-The section Device: The driver must be sis (with those quotation marks!). The option MaxXFBMem should be set to 8192 (also both with quotation marks!). A mem or video ram option or something like that is not needed for those adapters, and should not be used. (if it is there, just change it to a comment by adding a # at the beginning of the line. BTW, the format of this configuration file mostly looks like this: keyword value Option optionname value Option optionname between keyword and value or between the keyword Option and the optionname or before any keyword, you can use tabs or spaces, as you want, I think. After having configured the file, just try startx. If you don't have a laptop, just try to configure the x server correctly by dpkg-reconfigure xserver-xfree86 (choose sis driver and a reasonable monitor (never run a monitor at too high frequencies - serious demage can occur!)). If you've got further problems, you can write me at [EMAIL PROTECTED] Just configured two laptops with similar video adapters ;). Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problems installing woody
On Wed, 12 Jun 2002 05:57:13 -0300 Francisco Fialho [EMAIL PROTECTED] wrote: Michael, I couldn`t mount the /cdrom even changing my /etc/fstab to /dev/hdc... got the same message: /dev/hdc is not a block device. regards Hi! Do you know which controller your drive is connected to? If it is... ... at the primary controller, slave position: try mount /dev/hdb /cdrom ... at the secondary controller, master position: try mount /dev/hdc /cdrom ... at the secondary controller, slave position: try mount /dev/hdd /cdrom ... at the scsi controller: try mount /dev/sr0 /cdrom You can also try out all those possibilities. Or you press shift+PgUp (several times) after having booted, so you can see what the kernel has printed out (and usually also a message about detected cdrom's); you come back down by pressing shift+PgDn. Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: SCSI will not compile into kernel
Hi! This is quite strange, as the file /usr/src/linux/drivers/scs/aic7xxx/aicasm/aicasm_symbol.h does not even contain the string aicdb.h here at my machine (kernel-source-2.4.18). I've also compiled this driver several times w/o any problems. So I would suggest that you should look into the aicasm_symbol.h if it contains the string aicdb and if it does, replace the kernel sources (just delete the old ones, fetch package kernel-source-2.4.18, uncompress bz2 or gz file lying around in /usr/src and (in the same directory) ln -s kernel-source-1.4.18 linux). To accelerate the whole configuration etc., you can of course save the .config file from your current kernel directory somewhere and just copy it back into the (new) kernel source dir after having replaced the source, so that you won't have to set the old configuration options manually. Cheers, Stephan On Fri, 07 Jun 2002 14:07:28 -0400 Robert Webb [EMAIL PROTECTED] wrote: Hi everyone. I am trying to compile a 2.4.18 kernel and am running into problems when the SCSI section tries to complete. I downloaded the kernel from kernel.org and have tried many time to get it to work. Can anyone give me an idea as to what I may be doing wrong?? The error I get when doing make bzImage is below: make[2]: Entering directory `/usr/src/linux/drivers/scsi' make -C aic7xxx make[3]: Entering directory `/usr/src/linux/drivers/scsi/aic7xxx' make all_targets make[4]: Entering directory `/usr/src/linux/drivers/scsi/aic7xxx' make -C aicasm make[5]: Entering directory `/usr/src/linux/drivers/scsi/aic7xxx/aicasm' yacc -d aicasm_gram.y aicasm_gram.y:694: warning: previous rule lacks an ending `;' aicasm_gram.y:708: warning: previous rule lacks an ending `;' mv y.tab.c aicasm_gram.c lex -t aicasm_scan.l aicasm_scan.c *** Install db development libraries gcc -I/usr/include -I. -ldb aicasm_gram.c aicasm_scan.c aicasm.c aicasm_symbol.c -o aicasm aicasm_gram.y:1485: warning: type mismatch with previous implicit declaration /usr/share/bison/bison.simple:924: warning: previous implicit declaration of `yyerror' aicasm_gram.y:1485: warning: `yyerror' was previously implicitly declared to return `int' aicasm_symbol.c:47: aicdb.h: No such file or directory make[5]: *** [aicasm] Error 1 make[5]: Leaving directory `/usr/src/linux/drivers/scsi/aic7xxx/aicasm' make[4]: *** [aicasm/aicasm] Error 2 make[4]: Leaving directory `/usr/src/linux/drivers/scsi/aic7xxx' make[3]: *** [first_rule] Error 2 make[3]: Leaving directory `/usr/src/linux/drivers/scsi/aic7xxx' make[2]: *** [_subdir_aic7xxx] Error 2 make[2]: Leaving directory `/usr/src/linux/drivers/scsi' make[1]: *** [_subdir_scsi] Error 2 make[1]: Leaving directory `/usr/src/linux/drivers' make: *** [_dir_drivers] Error 2 mail1:/usr/src/linux# Thanks, Robert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: kernel compile in woody
Hi! I've always been compiling the kernel without use of make-kpkg etc., and so it just stayed the same for me. But I also think that the make-kpkg way has stayed the same. I've recommended it to some friends and I did it like this in woody (on my friends' machines): -make-kpkg --bzimage --config menuconfig binary-arch (or similar) -install the package you get. Dunno this is exactly the same as in potato but as I said, I think it should not be any different. Cheers, Stephan Hachinger On Fri, 7 Jun 2002 13:31:08 -0300 Marcelo Chiapparini [EMAIL PROTECTED] wrote: Hi! are the steps to compile a new kernel in woody the same as in potato? TIA Marcelo -- Marcelo Chiapparini DFT-IF/UERJ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: SV: Tekram 315U PCI
Hi! OK, now here is the explanation on the kernel configuration and compilation. If you have problems with getting the packages required, you can write me. 1.) The following packages should be installed: libncurses4-dev or libncurses-dev or libncurses5-dev; kernel-package, binutils, bin86, make , a gcc package (gcc, gcc-2.95, g++, g++-2.95) and all packages these ones depend on. (dunno if I'm missing anything here; if the compilation scripts complain about a missing file, you can search for the appropriate package at http://packages.debian.org (use the search form at the bottom). 2.) You now need kernel sources. Firstly, look around which kernel version you have by dmesg |more. This command will show you the kernel output from tehe startup, and you'll see if your kernel is version 2.2.x or 2.4.x (or if it's very old, 2.0.x). The kernel sources package you'll have to install depend on the distro you have and what kernel you have now: If you have the potato (stable/2.2) distribution and... ... kernel 2.0.x, install kernel-source-2.0.38 ... kernel 2.2.x, install kernel-source-2.2.19 If you have the testing distribution and... ... kernel 2.2.x, install kernel-source-2.2.20 ... kernel 2.4.x, install kernel-source-2.4.18 if you do not have one of these packages, install the most recent kernel-source 2.x.y package available, where x must be the same number which is in your running kernel, y is the higehest number which you have a package for. 3.) Now, go (that means cd, most the work is done on a console!!!) to /usr/src/ . There you'll find a file named kernel-source-2.x.y.tar.bz2 or (...).gz Now, uncompress this package, by tar xzf filename.gz or by tar xjf filename.bz2 ; this depends on how your sources are compressed. With older tar programs, you must use xIf (where I is a capital i) instead of xjf. The kernel-sources are now uncompressed; you'll find a new directory under /usr/src with the kernel insinde; now create a symbolic link named linux in /usr/src, which points onto the kernel directory to do this, do the following: cd /usr/src ln -s name of the kernel dir linux 4.) Install the tekram315 patches. For getting the newest patch, download http://www.garloff.de/kurt/linux/dc395/dc395-138.tar.gz into the /usr/src dir and uncompress it by tar xzf. Now, go into /usr/src/dc395 and do the following copy actions: cp -p dc395x_trm.* /usr/src/linux/drivers/scsi/ cp -p READ* /usr/src/linux/drivers/scsi/ and now the patching: cd /usr/src/linux patch -p1 /usr/src/dc395/dc395-integ2x.diff where x stands for the second number in your kernel version (0,2,4). Patch will tell you if it was successful, if errors have occured only while patching readme files or not at all, it will probably work. 5.) Go into /usr/src/linux and call: make-kpkg --config menuconfig --bzimage binary-arch This will start kernel-configuration and compilation. You can now choose, which drivers should be built into your selfmade kernel. There are two different ways of loading drivers in linux: Either, they are compiled directly into the kernel, or they are compiled as modules. Modules are drivers which can be loaded while the system is running; the kernel even can load modules it needs dynamically. I personally would choose to build all important drivers directly into the kernel when doing a compile for the first time, because you won't have to care about loading modules then. Attention: Don't ever compile the ext2 filesystem driver as a module. This leads to a chicken-egg-problem: The kernel cannot load the filesystem where the modules are on and you can only boot by bootdisk/boot-cd. Compile it straight into the kernel! Cause it would be too long if I would explain the whole configuration here, I'll only give some hints; carefully walk through the menus and choose the options, many also have a help text: You'll need to enable Experimental or new drivers because the realtek driver is new if you're using a 2.2 kernel. Enabling or switching options to compile as module (M) works with the whitespace key. Also enable _all three options_ under loadable module support. For the Realtek card, use the 8139too driver, if you have a 8139 chip. For the Tekram, use DC395/U/UW and DC315/U support under SCSI-SCSI low level drivers under SCSI, of course, CDROM support etc. must be enabled Switch on /dev/agppart under Character Devices, if available. For the Logitech mouse and keyboard, you'll need the ps2 mouse driver or an usb hid (human interface devices) driver with mouse/kb option (depends on if this kb/mouse is usb) enabled. The USB HID driver and the USB scanner/printer drivers depend on the USB-UHCI /OHCI driver (depends on chipset, for via/intel choose UHCI). After you'll have left the menu and have saved the config, make-kpkg will compile kernel and modules and headers into two .deb packages in /usr/src. Now, install them by: cd /usr/src dpkg -i kern*.deb You'll be asked a few questions, and the kernel will be copied to
Re: SV: Tekram 315U PCI
Hi! Yes, it's hard only one time. But the time will quite surely come where you _really_ need to recompile it, so it won't be a bad idea to do it now. Do you have someone (relative, friend, etc.) who can advise you or should I write you some tips about how to do it? (if you'd like this, please give me a short summary of the hardware you have (mainboard/processor type, cards which are inside)) Cheers, Stephan On Fri, 5 Apr 2002 22:30:45 +0200 Dan Christensen [EMAIL PROTECTED] wrote: Hi! Have you ever compiled a kernel yourself? Only one time is it hard to do ? Tia Dan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Tekram 315U PCI
Hi! Have you ever compiled a kernel yourself? Cheers, Stephan On Mon, 01 Apr 2002 22:49:59 +0200 Dan Christensen,,, [EMAIL PROTECTED] wrote: Hi all Im having som problems with sub, i have dl the driver from tekram, bu it only a .c and a .h files, ant i dont know how to compile them so it works, or some other way of gettign this scsi controler to work, via a moduls. Pleas guide me im a total newbe TIA Dan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ATI RADEON 7500 and X problem
Hi! Thanks very much for your answers. Cheers, Stephan On Tue, 26 Feb 2002 21:39:50 -0800 Aaron Brashears [EMAIL PROTECTED] wrote: On Tue, Feb 26, 2002 at 03:16:52PM -0800, Tim Moss wrote: You need XFree 4.2.0 for Radeon 7500 support but I don't think 4.2.0 is available as Debian packages yet. All very true. Before you bug the maintainer (like I did...) Check his webpage for updates: http://people.debian.org/~branden/
Re: about network config
Hi! Try to change /etc/network/interfaces like this: # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface iface lo inet loopback # The first network card - this entry was created during the Debian installation # (network, broadcast and gateway are optional) iface eth0 inet dhcp Also, dhcpcd or pump must be installed. Maybe you will have to configure dhcpcd or pump further, but I'm quite sure I just attached my machine to a friend's network, changed the above file and it worked fine. If anyone has to add something or if it doesn't work, let me know. Cheers, Stephan - Original Message - From: debianlist To: debian-user@lists.debian.org Sent: Wednesday, February 27, 2002 3:38 PM Subject: about network config HI: In win2k, I am using DHCP to connect internet. In Debian,can I use the information (ip,DNS Server..) get from in win2k to manual config network in Debian? Thanks
Re: LAN to Internet gateway problem [solved]
On Mon, 25 Feb 2002 23:21:47 +0100 Tony Crawford [EMAIL PROTECTED] wrote: Stephan Hachinger wrote (on 25 Feb 2002 at 17:36): machine I want to configure as router is 192.168.90.95 (stephan). Stephan has a second network card inside (192.168.37.95) and connects to the internet over this card and dsl (pppoE). Now, this is what I've tried: -Modifying the route table on pentiumdioxid (see attached route output)-Installing dnrd, a dns forwarder, on stephan (dns resulution seems to work without problems now)-setting ip_forward to yes in /etc/network/options on stephan I've also attached hosts.allow and hosts.deny. Been up for over four hours and no answers yet? Well then: I don't see anything in the above about any NAT, which you need if those private-IP hosts are going to talk to the Internet. You didn't say what kernel version you're running, so read the documentation on either ipchains or iptables--or go straight to the IP-masquerading Howto. Hi! Ok, I just had to setup masquerading and now it works, thx. Didn't know this was necessary because I've got no knowledge of IP networking *g*. Cheers and thanks, Stephan
ATI RADEON 7500 and X problem
Hi! A friend of mine (not on this list) has problems getting X version 4.1.0 (from testing) to start on his box with a Radeon 7500 card inside. When trying xf86cfg in graphics mode, it doesn't recognize the card correctly, and when choosing the drivers ati or r128 in xf86cfg text mode, X won't recognize the card either. I've attached two different error logs from tries with different drivers or so. Has anyone got a radeon (7500) running on such a system and does know what the typical problems are or how they can be solved or can anyone point me to one of the various threads which have been on this list about radeon (I just don't know when these threads were here)? Or can anyone tell me if the xserver_2.log is indeed indicating a bug in X11? Thanks very much in advance, Stephan Hachinger xserver_2.log Description: Binary data XFree86.0.log Description: Binary data
LAN to Internet gateway problem
Hi! I'm trying to configure one of my machines as a router to the internet, so that I can access the internet from my LAN. My second computer in my lan is 192.168.90.5 (pentiumdioxid), this machine I want to configure as router is 192.168.90.95 (stephan). Stephan has a second network card inside (192.168.37.95) and connects to the internet over this card and dsl (pppoE). Now, this is what I've tried: -Modifying the route table on pentiumdioxid (see attached route output)-Installing dnrd, a dns forwarder, on stephan (dns resulution seems to work without problems now)-setting ip_forward to yes in /etc/network/options on stephan I've also attached hosts.allow and hosts.deny. The problem is, when I try to ping www.debian.org from pentiumdioxid, pentiumdioxid gets the ip adress of debian.org (198.186.203.20) but it doesn't get any packages back. I'd be very glad if anyoune can help me. Cheers, Stephan P.S.: Into which file can I put the routing table modifications so that the modified routing table is automatically loadad at startup? pentiumdioxid.route Description: Binary data stephan.route Description: Binary data hosts.allow Description: Binary data hosts.deny Description: Binary data
searching for an ICQ application
Hi! OK, I know this has already been discussed before, but I've tried several ICQ apps, also the ones recommended in the discussions before and I'm just not getting any usable solution. So, does anyone know an ICQ application which can connect to newer ICQ versions like 2001b without being rejected and is quite nice and doens't need gnome (I'm using kde at the moment)? The problem with all new licq versions I've tried etc. is that I cannot send any messages (connnection is rejected by peer or the msgs simply don't arrive); is this normal or perhaps related to a bad configuration of my networking? Thanks in advance, Stephan Hachinger
Re: .debs of IBM Java runtime environment?
Hi! Hmm, there should be some on www.blackdown.org ! Cheers, Stephan - Original Message - From: Morten Bo Johansen [EMAIL PROTECTED] To: Debian Users debian-user@lists.debian.org Sent: Friday, February 01, 2002 9:35 PM Subject: .debs of IBM Java runtime environment? Does anyone know of any unofficial .debs of the IBM Java runtime environment? Regards, Morten -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: NE2000 ISA
Hi! I've got _two_ ne2000 compatibles (one realtek pci and one other isa) in my machine and they work w/o problems (and this machine also has many other cards (scsi, sb64 etc.) inside). With my isa card came a disk with a setup utility to set the i/o port of the isa card. Even if you have pnp enabled, there should be a diagnostic utility or so which will tell you the i/o port, and if you're lucky it will work under dos which you can boot from a disk. Do you have such a setup disk and a dos boot disk?? Cheers, Stephan Original Message - From: Dimitri Maziuk [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Friday, January 11, 2002 9:24 PM Subject: Re: NE2000 ISA * arief muLya ([EMAIL PROTECTED]) spake thusly: ... The problem is, I can't just modprobe the module. They says if it's an ISA NE2000 Card, I need to give the right IO and IRQ setting when I modprobe/insmod the module. Your best bet is to get a different NIC and throw ne2k away (yes, I know, finding an ISA NIC may be hard these days). If it's a jumpered card, you should have (may be able to find) the fine manual. If not, you'll need the config utility (IIRC ne2k's weren't pnp, even the ne2k+ that claimed to be, so fscking around with isapnp won't get you anywhere). Either way, ne2k had a wide i/o port that overlapped with other devices' ports in most configurations (FVO other devices = sound card, floppy, ide and parallel port). Configuring them was a real PITA even if you had the manual and software. Dima -- Mirrors and copulation are abominable because they increase the number of entities.-- corollary to Occam's Razor -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: /dev/dsp not found: KDE/ALSA - pls help!
Hello! Sorry for posting the whole message on the list w/o snipping, but I think some parts of the thread did not make it into the mailing list and now I really have no ideas anymore what is going wrong here :(. KDE doesn't recognize /dev/dsp but in fact, everything else seems to be ok etc... Has anyone had issues like these with alsa 0.9.0b3 or similar or does anyone know what the problem really is caused by? Cheers, Stephan P.S.: Ross, sorry that I have not replied for so long but I've had lots of stress the last days :(. On Fri, 21 Dec 2001 08:25:41 -0800 Ross Boylan [EMAIL PROTECTED] wrote: The basic sound is compiled into the kernel--not a module. Other than that, my sound configuration is as you describe. On Fri, Dec 21, 2001 at 03:11:10PM +0100, Stephan Hachinger wrote: Hi! Is the soundcore.o module also loaded? That's a module directly from the linux kernel (if you compile the kernel yourself: You have to switch general sound card support to M (modularized), but leave all other options off on the sound card support configuration page; if you don't compile it yourself: This module should be part of the kernel packages). It it at least necessary with my alsa 5.10 distribution. Just try to load it using modconf. Cheers, Stephan On Thu, 20 Dec 2001 22:00:31 -0800 Ross Boylan [EMAIL PROTECTED] wrote: Thanks for the suggestions. Unfortunately, I already had the aliases in my modules.conf (except I use sbawe). I tried setting the sound system to OSS, but still no signs of life. I'm reluctant to remove the aliases, since the alsa documenation calls for them. Argh! lsmode shows lots of the right modules loaded: 35744 0 9184 0 [snd-pcm-oss] 6016 0 5312 0 [snd-card-sbawe] 5408 0 [snd-card-sbawe] 48576 0 [snd-pcm-oss snd-sb16-dsp] 10432 0 [snd-opl3 snd-pcm] 2624 0 [snd-card-sbawe snd-sb16-dsp] 12576 0 [snd-mpu401-uart] 10816 0 [snd-card-sbawe] 3952 0 [snd-opl3 snd-rawmidi snd-emu8000] 15392 0 [snd-card-sbawe] snd-sb-common 6040 0 [snd-card-sbawe snd-sb16-dsp snd-sb16-csp] snd-hwdep 3680 0 [snd-opl3 snd-sb16-csp] snd24776 0 [snd-pcm-oss snd-mixer-oss snd-card-sbawe snd-opl3 snd-sb16-dsp snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-emu8000 snd-seq-device snd-sb16-csp snd-sb-common snd-hwdep] On Thu, Dec 20, 2001 at 05:21:55PM +0100, Stephan Hachinger wrote: Hi! Hmm, I don't have no idea :(. But I have looked through my modules.conf and found the following entries: # ALSA multiplexer alias char-major-116 snd [etc] Maybe adding the missing entries helps. On this system where I have those entries in modules.conf, respectively in /etc/modutils/aliases (the best is, you add such entries to /etc/modutils/aliases - run update-modules - they are written to modules.conf automatically), strangely enough only setting the arts daemon to open sound system makes it work, but at least the sound server works... The system had another soundcard before and with this one, it worked absolutely the right way but now only with the oss trick. Another try: I also have a second system here without any entries in /etc/modutils/aliases (arts runs properly!); on this system the following modules are loaded at bootup: snd-card-sbawe (i.e. my sound card module) snd-mixer-oss snd-pcm-oss snd-synth-emu8000 (i.e. the module for my AWE wavetable device) Hmm, maybe the first or the second entries (or combine both ;)) help... Any other suggestions by anyone else? Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: /dev/dsp not found: KDE/ALSA
Hi! Is the soundcore.o module also loaded? That's a module directly from the linux kernel (if you compile the kernel yourself: You have to switch general sound card support to M (modularized), but leave all other options off on the sound card support configuration page; if you don't compile it yourself: This module should be part of the kernel packages). It it at least necessary with my alsa 5.10 distribution. Just try to load it using modconf. Cheers, Stephan On Thu, 20 Dec 2001 22:00:31 -0800 Ross Boylan [EMAIL PROTECTED] wrote: Thanks for the suggestions. Unfortunately, I already had the aliases in my modules.conf (except I use sbawe). I tried setting the sound system to OSS, but still no signs of life. I'm reluctant to remove the aliases, since the alsa documenation calls for them. Argh! lsmode shows lots of the right modules loaded: 35744 0 9184 0 [snd-pcm-oss] 6016 0 5312 0 [snd-card-sbawe] 5408 0 [snd-card-sbawe] 48576 0 [snd-pcm-oss snd-sb16-dsp] 10432 0 [snd-opl3 snd-pcm] 2624 0 [snd-card-sbawe snd-sb16-dsp] 12576 0 [snd-mpu401-uart] 10816 0 [snd-card-sbawe] 3952 0 [snd-opl3 snd-rawmidi snd-emu8000] 15392 0 [snd-card-sbawe] snd-sb-common 6040 0 [snd-card-sbawe snd-sb16-dsp snd-sb16-csp] snd-hwdep 3680 0 [snd-opl3 snd-sb16-csp] snd24776 0 [snd-pcm-oss snd-mixer-oss snd-card-sbawe snd-opl3 snd-sb16-dsp snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-emu8000 snd-seq-device snd-sb16-csp snd-sb-common snd-hwdep] On Thu, Dec 20, 2001 at 05:21:55PM +0100, Stephan Hachinger wrote: Hi! Hmm, I don't have no idea :(. But I have looked through my modules.conf and found the following entries: # ALSA multiplexer alias char-major-116 snd [etc] Maybe adding the missing entries helps. On this system where I have those entries in modules.conf, respectively in /etc/modutils/aliases (the best is, you add such entries to /etc/modutils/aliases - run update-modules - they are written to modules.conf automatically), strangely enough only setting the arts daemon to open sound system makes it work, but at least the sound server works... The system had another soundcard before and with this one, it worked absolutely the right way but now only with the oss trick. Another try: I also have a second system here without any entries in /etc/modutils/aliases (arts runs properly!); on this system the following modules are loaded at bootup: snd-card-sbawe (i.e. my sound card module) snd-mixer-oss snd-pcm-oss snd-synth-emu8000 (i.e. the module for my AWE wavetable device) Hmm, maybe the first or the second entries (or combine both ;)) help... Any other suggestions by anyone else? Cheers, Stephan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: /dev/dsp not found: KDE/ALSA
Hi! Hmm, I don't have no idea :(. But I have looked through my modules.conf and found the following entries: # ALSA multiplexer alias char-major-116 snd # OSS Emulation multiplexer alias char-major-14 soundcore # ALSA card alias snd-card-0 snd-card-es1968 (the latter is the module for my sound card) # OSS Emulator card alias sound-slot-0 snd-card-0 # OSS Emulation autoload alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-12 snd-pcm-oss Maybe adding the missing entries helps. On this system where I have those entries in modules.conf, respectively in /etc/modutils/aliases (the best is, you add such entries to /etc/modutils/aliases - run update-modules - they are written to modules.conf automatically), strangely enough only setting the arts daemon to open sound system makes it work, but at least the sound server works... The system had another soundcard before and with this one, it worked absolutely the right way but now only with the oss trick. Another try: I also have a second system here without any entries in /etc/modutils/aliases (arts runs properly!); on this system the following modules are loaded at bootup: snd-card-sbawe (i.e. my sound card module) snd-mixer-oss snd-pcm-oss snd-synth-emu8000 (i.e. the module for my AWE wavetable device) Hmm, maybe the first or the second entries (or combine both ;)) help... Any other suggestions by anyone else? Cheers, Stephan - Original Message - From: Ross Boylan [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Cc: Ross Boylan [EMAIL PROTECTED]; debian-user@lists.debian.org Sent: Monday, December 17, 2001 6:27 PM Subject: Re: /dev/dsp not found: KDE/ALSA On Thu, Dec 13, 2001 at 05:52:29PM +0100, Stephan Hachinger wrote: Hi! Is libarts-alsa installed and is the soundserver configured to use alsa in the control cener? Hmm, sometimes trying different sond system settings on the sound server configuration page in kcontrol also helps. Cheers, Stephan Yes to both questions. I had the KDE soundserver set to autodetect, but I also tried setting it to ALSA. No dice. It's odd, because some of my apps produce sound anyway. On Wed, 12 Dec 2001 17:07:12 -0800 Ross Boylan [EMAIL PROTECTED] wrote: The things is, I ran snddevices when I did the original install. I think the can't find /dev/dsp message is more of a complaint about nothing functioning being there; /dev/dsp is a link to /dev/dsp0 for me: lrwxrwxrwx1 root root9 Dec 21 2000 /dev/dsp - /dev/dsp0 crw-rw1 root audio 14, 3 Dec 21 2000 /dev/dsp0 I presume the link itself is always there. On Wed, Dec 12, 2001 at 10:18:10PM +0100, Stephan Hachinger wrote: Hi! I've had quite a similar problem... maybe this will fix it: Search all packages for the script file snddevices by typing dpkg -S snddevices Then cd into the directory where the script is and call it... after that the devices should be there. Cheers, Stephan - Original Message - From: Ross Boylan [EMAIL PROTECTED] To: debian-user@lists.debian.org Cc: Ross Boylan [EMAIL PROTECTED] Sent: Wednesday, December 12, 2001 5:47 PM Subject: /dev/dsp not found: KDE/ALSA I am running alsa and KDE. The first time I log into KDE I get an error that /dev/dsp can't be found. It's there when I look. If I log out and back in, I get no warning, and sound works. I believe I have all the modules.conf setup properly. I suspect that the relevant module isn't being dynamically loaded properly, but I'm not sure what the cause or the cure is. Can anyone help? Here's a bit a modules.conf: ### update-modules: start processing /etc/modutils/alsa ## First, the device major numbers #alsa native alias char-major-116 snd # OSS/Free alias char-major-14 soundcore options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660 snd_device_gid=29 snd_device_uid=0 options snd-card-sbawe snd_index=0 snd_id=AWE snd_isapnp=1 ## multiplexer needs top level soundcard alias snd-card-0 snd-card-sbawe # OSS/Free alias sound-slot-0 snd-card-0 ## Done with ALSA, but OSS needs more alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ### update-modules: end processing /etc/modutils/alsa ### update-modules: start processing /etc/modutils/alsa-path # Debian ALSA modules path # Do not edit this unless you understand what you're doing. path=/lib/modules/`uname -r`/alsa ### update-modules: end processing /etc/modutils
Re: /dev/dsp not found: KDE/ALSA
Hi! Is libarts-alsa installed and is the soundserver configured to use alsa in the control cener? Hmm, sometimes trying different sond system settings on the sound server configuration page in kcontrol also helps. Cheers, Stephan On Wed, 12 Dec 2001 17:07:12 -0800 Ross Boylan [EMAIL PROTECTED] wrote: The things is, I ran snddevices when I did the original install. I think the can't find /dev/dsp message is more of a complaint about nothing functioning being there; /dev/dsp is a link to /dev/dsp0 for me: lrwxrwxrwx1 root root9 Dec 21 2000 /dev/dsp - /dev/dsp0 crw-rw1 root audio 14, 3 Dec 21 2000 /dev/dsp0 I presume the link itself is always there. On Wed, Dec 12, 2001 at 10:18:10PM +0100, Stephan Hachinger wrote: Hi! I've had quite a similar problem... maybe this will fix it: Search all packages for the script file snddevices by typing dpkg -S snddevices Then cd into the directory where the script is and call it... after that the devices should be there. Cheers, Stephan - Original Message - From: Ross Boylan [EMAIL PROTECTED] To: debian-user@lists.debian.org Cc: Ross Boylan [EMAIL PROTECTED] Sent: Wednesday, December 12, 2001 5:47 PM Subject: /dev/dsp not found: KDE/ALSA I am running alsa and KDE. The first time I log into KDE I get an error that /dev/dsp can't be found. It's there when I look. If I log out and back in, I get no warning, and sound works. I believe I have all the modules.conf setup properly. I suspect that the relevant module isn't being dynamically loaded properly, but I'm not sure what the cause or the cure is. Can anyone help? Here's a bit a modules.conf: ### update-modules: start processing /etc/modutils/alsa ## First, the device major numbers #alsa native alias char-major-116 snd # OSS/Free alias char-major-14 soundcore options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660 snd_device_gid=29 snd_device_uid=0 options snd-card-sbawe snd_index=0 snd_id=AWE snd_isapnp=1 ## multiplexer needs top level soundcard alias snd-card-0 snd-card-sbawe # OSS/Free alias sound-slot-0 snd-card-0 ## Done with ALSA, but OSS needs more alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ### update-modules: end processing /etc/modutils/alsa ### update-modules: start processing /etc/modutils/alsa-path # Debian ALSA modules path # Do not edit this unless you understand what you're doing. path=/lib/modules/`uname -r`/alsa ### update-modules: end processing /etc/modutils/alsa-path Kernel 2.4.12. System is basically woody. Here are my alsa packages: ii alsa-base 0.9+0beta9-1 ALSA driver common files ii alsa-modules-2.4.10 0.9+0beta7-2+p0+rb.1 Advanced Linux Sound Architecture (drivers) ii alsa-modules-2.4.12 0.9+0beta7-2+p0+rb.6 Advanced Linux Sound Architecture (drivers) ii alsa-source 0.9+0beta9-1 ALSA driver source ii alsa-utils0.9.0beta4-1 Advanced Linux Sound Architecture (utils) ii alsa-utils-0.50.5.9b-3 Advanced Linux Sound Architecture (utils) ii alsaplayer0.99.32+0.99.33pre3-1 PCM player designed for ALSA ii alsaplayer-alsa 0.99.32+0.99.33pre3-1 PCM player designed for ALSA (ALSA autput module) ii alsaplayer-esd0.99.32+0.99.33pre3-1 PCM player designed for ALSA (ESD output module) ii alsaplayer-oss0.99.32+0.99.33pre3-1 PCM player designed for ALSA (OSS output module) These problems occurred when everything was at beta7, so I don't think the fact I haven't compiled the latest source is the problem. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: /dev/dsp not found: KDE/ALSA
Hi! I've had quite a similar problem... maybe this will fix it: Search all packages for the script file snddevices by typing dpkg -S snddevices Then cd into the directory where the script is and call it... after that the devices should be there. Cheers, Stephan - Original Message - From: Ross Boylan [EMAIL PROTECTED] To: debian-user@lists.debian.org Cc: Ross Boylan [EMAIL PROTECTED] Sent: Wednesday, December 12, 2001 5:47 PM Subject: /dev/dsp not found: KDE/ALSA I am running alsa and KDE. The first time I log into KDE I get an error that /dev/dsp can't be found. It's there when I look. If I log out and back in, I get no warning, and sound works. I believe I have all the modules.conf setup properly. I suspect that the relevant module isn't being dynamically loaded properly, but I'm not sure what the cause or the cure is. Can anyone help? Here's a bit a modules.conf: ### update-modules: start processing /etc/modutils/alsa ## First, the device major numbers #alsa native alias char-major-116 snd # OSS/Free alias char-major-14 soundcore options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660 snd_device_gid=29 snd_device_uid=0 options snd-card-sbawe snd_index=0 snd_id=AWE snd_isapnp=1 ## multiplexer needs top level soundcard alias snd-card-0 snd-card-sbawe # OSS/Free alias sound-slot-0 snd-card-0 ## Done with ALSA, but OSS needs more alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ### update-modules: end processing /etc/modutils/alsa ### update-modules: start processing /etc/modutils/alsa-path # Debian ALSA modules path # Do not edit this unless you understand what you're doing. path=/lib/modules/`uname -r`/alsa ### update-modules: end processing /etc/modutils/alsa-path Kernel 2.4.12. System is basically woody. Here are my alsa packages: ii alsa-base 0.9+0beta9-1 ALSA driver common files ii alsa-modules-2.4.10 0.9+0beta7-2+p0+rb.1 Advanced Linux Sound Architecture (drivers) ii alsa-modules-2.4.12 0.9+0beta7-2+p0+rb.6 Advanced Linux Sound Architecture (drivers) ii alsa-source 0.9+0beta9-1 ALSA driver source ii alsa-utils0.9.0beta4-1 Advanced Linux Sound Architecture (utils) ii alsa-utils-0.50.5.9b-3 Advanced Linux Sound Architecture (utils) ii alsaplayer0.99.32+0.99.33pre3-1 PCM player designed for ALSA ii alsaplayer-alsa 0.99.32+0.99.33pre3-1 PCM player designed for ALSA (ALSA autput module) ii alsaplayer-esd0.99.32+0.99.33pre3-1 PCM player designed for ALSA (ESD output module) ii alsaplayer-oss0.99.32+0.99.33pre3-1 PCM player designed for ALSA (OSS output module) These problems occurred when everything was at beta7, so I don't think the fact I haven't compiled the latest source is the problem. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: transfering linux system to another hard drive
- Original Message - From: Cheryl Homiak [EMAIL PROTECTED] To: [EMAIL PROTECTED]; speakup [EMAIL PROTECTED]; debian-user@lists.debian.org Sent: Tuesday, December 04, 2001 3:29 PM Subject: transfering linux system to another hard drive I apologize for the cross-post, but I'm trying to get info as soon as possible; even if somebody has just seen this on one of these lists and can steer me toward the correct archive it would be appreciated. My hard drive with linux is failing; I have just obtained a 20gig drive which will have both my dos and linux on it. All drives--my dying linux drive, my old and tiny dos drive, and my new drive--are all connected to the computer. I will have to partition the hard drive, but it is being recognized correctly in the bios and linux. Eventually, the dying drive (hda) will be removed as will the dos drive (hdd) and the new drive (hdb) will become hda. I want to know if there is a way to transfer my linux from the dying 2.5gig drive to the new 20gig; I am assuming I will first need to partition the hard drive and the partitioning will probably be somewhat different from the old drive due to the difference in size. Sorry for the info repeat to those on blinux. I know I saw a discussion of just this problem somewhere recently but haven't been able to locate it. Also, can I make my partition that will hold dos with linux since I have no data already onthe hard drive to protect? thanks. Cheryl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Hi! You cannot install linux and dos on the same partition, at least not without dealing with umsdos or so and this is not the smoothest solution I think. But, as far as I have experienced, transferring the system to another hard drive which is partitioned correctly (one linux native, one linux swap) is not very difficult: Just use mc to copy the whole hard disk contents (without /proc, but also dev so that there will be the right entries in the new /dev directory - mc should only copy the links in dev but not the device contents ;) ) into the new root partition. Then make a directory named proc in the new root drive. Now, you only have to change some config files so that the hard drive devices/device numbers are set correctly (/etc/fstab, /etc/lilo.conf (for the format of this one see man lilo.conf) ... I cannot remember any other files now but that should be sufficient). The devices you write into those files must be the ones which will be valid *after* you've disconnected your bad hard disk (*IDE* hard disk devices: /dev/hdax for prim. master, /dev/hdbx for prim slave, /dev/hdcx for sec. master, /dev/hddx for sec. slave; x is the partition number; the device without x the whole disk). Now disconnect your bad hard drive. For the first start, you'll need a boot disk or debian bootable cd, type rescue root=/dev/device name of the partition which is now the new root; system starts up; once run lilo and the boot block should be installed; mark partition with lilo on it as active in fdisk. I think I've made this at least two times and it's really worth a try as there is no data on your new HDD yet which could be destroyed, if I've understood you correctly. If anyone discovers a fatal error in my solution, please tell us immediately! Cheers, Stephan
Re: Printing in KDE
Hi! I had the same problem; I think installing lprng instead of lpd solves the problem... if not, try to switch the print system setting in KDE from LPR to BSD and back etc, the problems should go away. Only little syntax incompatibilites or so. Cheers, Stephan - Original Message - From: Nathan Weston [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Monday, November 19, 2001 11:24 PM Subject: Printing in KDE I am running debian unstable, and I have a local printer that is working with lpr. However, when I try to print from KDE, it calls lpr with the -#num option to indicate the number of copies. lpr does not recognize this option and prints out a usage message. According to both the man page and the usage message, the -#num option is valid, but in practice lpr doesn't recognize it. Is this a bug in lpr? the documentation? KDE? Does anyone know a workaround? Thanks, Nathan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: weird 100% disk usage
Hi! Hmm, I'm also sometimes getting such disk usages on my 2,5 GB hdd machine. But you cannot write infinite amounts of data on it when it is in this state... only some dozens of MBytes... maybe this data is just fetched by the linux cache?? Cheers, Stephan - Original Message - From: Oliver Elphick olly@lfix.co.uk To: [EMAIL PROTECTED] Cc: debian-user@lists.debian.org Sent: Tuesday, October 09, 2001 7:45 AM Subject: Re: weird 100% disk usage joey tsai wrote: My drive appears to be full via df: [corban][05:07pm][~] $ df -h FilesystemSize Used Avail Use% Mounted on /dev/hda1 61M 59M 0 100% / However, I'm not exactly sure I'm even getting 57M used: [corban][05:09pm][/home/joeytsai] # du -shx / 23M / One possibility is that there is material written in a mount-point directory such as /usr. When the partition is mounted, the contents of that directory (if any) will be unavailable. -- Oliver Elphick[EMAIL PROTECTED] Isle of Wight http://www.lfix.co.uk/oliver GPG: 1024D/3E1D0C1C: CA12 09E0 E8D5 8870 5839 932A 614D 4C34 3E1D 0C1C Every good gift and every perfect gift is from above, and cometh down from the Father of lights, with whom is no variableness, neither shadow of turning. James 1:17 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Kernel Panic: VFS Unable to mount root fs on 21:04
- Original Message - From: Dave Sherohman [EMAIL PROTECTED] To: Debian User List debian-user@lists.debian.org Sent: Monday, October 08, 2001 4:52 PM Subject: Re: Kernel Panic: VFS Unable to mount root fs on 21:04 On Sat, Oct 06, 2001 at 02:17:20PM -0400, Stan Brown wrote: I'm trying to set up a new machine this weekend, and i'm in trouble. I know you needed a solution by Monday, so this is a bit late, but I haven't seen anyone else post an explanation of what the error actually means, so... Now, I have a problem. The machine will no longer boot from the hard disk. I get the message from the subject line. I can boot it from the boot floppy. lilo (or something else) is telling the kernel to mount / from device 21:04 and the kernel doesn't know how to do that. According to Documentation/devices.txt in my kernel source tree, major device 21 is the generic SCSI subsystem and minor device 04 in that system is the fifth device, so 21:04 would be /dev/sg4 (or /dev/sge). Either a) you don't have generic SCSI support in your kernel, b) you don't have five generic SCSI devices, or c) you have to boot off a SCSI drive (/dev/sd*), not a generic SCSI device (/dev/sg*). Hmm, maybe the kernel has no support for your scsi card/devices, yes. BTW, probably the magic number written to the real-root-dev file is the magic number description for your root device (every device in Linux can be described by such a number combination - for the numbering system see attached file devices.txt, the format in the real-root-dev file is for example for /dev/hdb1: 0x365). Cheers, Stephan attachment: devices.zip
Re: Getting sound to work
Hi! I've had some problem sorting my mail in the last days - if wrote a mail which I did not respond to in that time, please send it again. Cheers, Stephan
Re: mouse problems in KDE
On Sat, Oct 06, 2001 at 01:16:17AM -0400, tim wrote: I am not sure where this problem lies. The mouse seems to work fine from the console. It also seems to work fine at the kde login screen, but once kde loads I can not move the mouse smoothing, it mouse jumps all over the place and adds random mouse clicks. If you do use GPM, then you should be able to tell X (in XF86Config) to use /dev/gpmdata as the mouse device. The protocol information should remain unchanged. Yes this is probably the best, but do not forget to switch on repeating with gpmconfig! Use raw as protocol. Cheers, Stephan
Re: Kernel Panic: VFS Unable to mount root fs on 21:04
- Original Message - From: Stan Brown [EMAIL PROTECTED] To: Debian User List debian-user@lists.debian.org Sent: Saturday, October 06, 2001 8:17 PM Subject: Kernel Panic: VFS Unable to mount root fs on 21:04 I'm trying to set up a new machine this weekend, and i'm in trouble. I installed a minimal stable over the network. then upgraded to Progeny. Then I wen to istall the 2.4 kernel packages from http://people.debian.org/~bunk (thanks for the good work on these BTW). Now, I have a problem. The machine will no longer boot from the hard disk. I get the message from the subject line. I can boot it from the boot floppy. During the install of the 2.4 kernel package. I goot a message about needing to add a initrd line to lilo.conf. It sufested puting a line in /etc/kern-img.conf (from memory). I have tried this, and also tried adding the sugested initrd line to /etc/lilo.conf. But nieht gets me to the point where I can boot from the hard disk. Help Please! Hi! Have you called the command lilo once at the command line after changing lilo.conf? Maybe that'll do it. Cheers, Stephan
Re: Getting sound to work
Hi! Hmm, found a neat programm which could tell you if the card is on the pci bus: lspci or so from the package pciutils. Please try that once. And... you could try the following module parameter: esstype=0 (and nothing more). Another question: Have you compiled the kernel yourself, and which system are you running (testing=sid or stable=potato or unstable=woody)? If you have CD's, it's probably potato. Cheers, Stephan
Re: Output of pnpdump
Hi! -then: pnpdump /etc/insapnp.conf (pnpdump is in the package isapnptools) I did this but none of the entries seems to match my I/O Port Info :( -After isapnp succeeds, try again starting the module. Maybe you also have to set io= / irq= / dma= etc. parameters in addition to the ess version paramter I told you when you load the module; you get this values from the valid lines in isapnp.conf. So the syntax in modconf is like this? esstype=foo /irq=foo /dma=foo /io=foo No, it's esstype=foo irq=foo dma=foo io=foo - Original Message #2 - From: Steven Farrier [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Sunday, September 30, 2001 10:21 AM Subject: Re: Output of pnpdump BTW, here is the output a pnpdump snip # # Trying port address 0273 # Trying port address 027b etc. Hmm, it seems to find no isa pnp board... that's quite strange... Maybe the card is really attached to PCI; please try to find out about that by looking at the properties of the sound devices once more... at least at my win2000 box the dialog tells me three lines of information for the device: device type, manufacturer and location of the device; the third line could contain something interesting. If you find out nothing that way... could you open your PC or is there a guarantee seal on it which prevents you from opening? If you are able to take a look into it, you can see what kind of sound card is in there: -If the sound output connector is on the mainboard, it's a on board card. -If the card behind the output connector is in a black slot, it's an ISA card. -If it's in a white slot, it's a PCI card. -When was your machine built? I think we won't get any further by this isapnp stuff, but if we won't get it to work, you can still try out another kind of sound driver, alsa. But let's still try with this normal solution for some time as alsa may be a little difficult to install. Cheers, Stephan
Re: Getting sound to work
Oh, sorry, I changed the subject line by mistake although the thread was the same... so this is a double-posting. Hi! -then: pnpdump /etc/insapnp.conf (pnpdump is in the package isapnptools) I did this but none of the entries seems to match my I/O Port Info :( -After isapnp succeeds, try again starting the module. Maybe you also have to set io= / irq= / dma= etc. parameters in addition to the ess version paramter I told you when you load the module; you get this values from the valid lines in isapnp.conf. So the syntax in modconf is like this? esstype=foo /irq=foo /dma=foo /io=foo No, it's esstype=foo irq=foo dma=foo io=foo - Original Message #2 - From: Steven Farrier [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Sunday, September 30, 2001 10:21 AM Subject: Re: Output of pnpdump BTW, here is the output a pnpdump snip # # Trying port address 0273 # Trying port address 027b etc. Hmm, it seems to find no isa pnp board... that's quite strange... Maybe the card is really attached to PCI; please try to find out about that by looking at the properties of the sound devices once more... at least at my win2000 box the dialog tells me three lines of information for the device: device type, manufacturer and location of the device; the third line could contain something interesting. If you find out nothing that way... could you open your PC or is there a guarantee seal on it which prevents you from opening? If you are able to take a look into it, you can see what kind of sound card is in there: -If the sound output connector is on the mainboard, it's a on board card. -If the card behind the output connector is in a black slot, it's an ISA card. -If it's in a white slot, it's a PCI card. -When was your machine built? I think we won't get any further by this isapnp stuff, but if we won't get it to work, you can still try out another kind of sound driver, alsa. But let's still try with this normal solution for some time as alsa may be a little difficult to install. Cheers, Stephan
Re: Getting Sound to work
Hello again! Sorry that I didn't write for so long but I had the flu. So, I've finally looked up what this chip is and I've seen... it's an ISA card chip. So, you probably have to set the resources for this card before you can load the sb module. Maybe, you can do this by switching the PNP OS installed option of your BIOS to No so that the BIOS sets the resources (but switching that may cause problems with windows) , but a common solution is that you have set them by the 'isapnp' program. To prepare this, do the following: -maybe delete the current /etc/isapnp.conf -then: pnpdump /etc/insapnp.conf (pnpdump is in the package isapnptools) -then: edit the /etc/isapnp.conf: Pnpdump has created many possible configurations, and you must make one valid by removing the '#' signs before the lines belonging to this one configuration. Also, you must remove the '#' before the (ACT Y) of this device. Also see 'man isapnp.conf' for examples. -now, you can try 'isapnp /etc/isapnp.conf' and see if it takes the settings without problems. If it sees some problems, maybe a reboot helps (I don't really know because I have no such devices here at the moment although I had some); you don't have to call isapnp a second time after the reboot because it is automatically called at system bootup. Just look around if there are any error messages from isapnp or if it has succeeded. Sometimes, isapnp setups can be somewhat tricky because pnpdump suggests wrong values or so... if that's the case, maybe you can find more documentation in the kernel Documentation directory or at howto.tucows.com or at www.esstech.com. -After isapnp succeeds, try again starting the module. Maybe you also have to set io= / irq= / dma= etc. parameters in addition to the ess version paramter I told you when you load the module; you get this values from the valid lines in isapnp.conf. Just mail again if you have any problems! Cheers, Stephan
Re: Java in Konqueror
Hi! There's a similar discussion on this list at the moment and we said that maybe one just needs j2re1.3: The only Java package I have installed is the j2re1.3 package from blackdown.org. They have apt-getable deb packages. Hmm, maybe you could just write a little mail to the list if it also works for you. Cheers, Stephan - Original Message - From: Liu Tao [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Tuesday, September 25, 2001 8:49 AM Subject: Java in Konqueror Hi I am using kde2.2.1 in sid and my web browser is konqueror. I installed jdk package, and enabled java and javascript globally in konqueror. Then I opend chat.yahoo.com, but I can't enter a chat room. Konqueror shows Loading applet, then nothing happend. Does someone could chat in yahoo with konqueror? -- Regards Liu Tao -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Getting Sound to work
Original Message - From: Steven Farrier [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Tuesday, September 25, 2001 8:26 AM Subject: Getting Sound to work I am trying to esd sound to work on my computer but I just can't do it. I can get genertic beeps on the command line but that is it. In windows it says I have a ES1869 audiodrive. I have read the soundblaster module is supposed to be for that but installation failed. Hello! Try to pass a parameter esstype=1869 to the sb module, because this chip isn't autotdetected by default. Is that a pci card, BTW? Please just drop me a little mail if this solution worked. Cheers, Stephan
Re: java with Konqueror in KDE (woody)
- Original Message - From: Alejandro Diego Garin [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Monday, September 24, 2001 4:33 PM Subject: Re: java with Konqueror in KDE (woody) On Friday 21 September 2001 18:43, you wrote: - Original Message - I have installed KDE on woody and I would like to use Konqueror as my web browser so I enabled Java globally because I need it, but It doesn't work. (i have installed jdk of course) Do you have similars problems? Hello! Hmm, are you sure that the path to the java executable (KControl-Web Browser-Konqueror Browser-JAVA) is set rightly? I have kde 2.2.0 beta 4 or so and it works. What's your kde version? Hello! yes I had the correct path but I solved the problem instaling another java virtual machine. (j2sdk 1.3 Blackdown Java). This works fine but I am still having problems with some applets. Thanks for the message. cheers Hi! Hmm, maybe it's true that a j2sdk1.3 or so is needed for Konqueror JAVA to function properly... I have j2sdk1.3 installed, too. But don't know anymore where I got it. Cheers, Stephan
Re: Creating Device drivers
- Original Message - From: Rainer Sigl [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Friday, September 21, 2001 1:57 PM Subject: Creating Device drivers Hi, please can anybody tell me the way to include a new device driver as loadable module AND, alternatively, in the kernel. My special case: I have got a RAid Controller ICP GDT6123RS with the driver files gdth.tgz and I have kernel 2.2.19 At the time I have got a new gdth.o in /lib/modules/2.2.19 but I can't reproduce the way I did it. And then??? Hello! This module is part of the standard set of modules installed by debian, so you do not have to compile it your self or get any tgz from the web, I think. Just start modconf and install the module (under scsi), maybe you've got to user some parameters (irq=xx or so). If you have problems with the latter, you can install the kernel-doc-2.2.19 package (just apt-get it) and read the documentation of the module at /usr/doc/kernel-doc-2.2.19/Documentation/. If you have any further problems, just contact me. Cheers, Stephan
Re: java with Konqueror in KDE (woody)
- Original Message - From: Alejandro Diego Garin [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Friday, September 21, 2001 2:58 PM Subject: java with Konqueror in KDE (woody) I have installed KDE on woody and I would like to use Konqueror as my web browser so I enabled Java globally because I need it, but It doesn't work. (i have installed jdk of course) Do you have similars problems? Hello! Hmm, are you sure that the path to the java executable (KControl-Web Browser-Konqueror Browser-JAVA) is set rightly? I have kde 2.2.0 beta 4 or so and it works. What's your kde version? Cheers, Stephan
Re: Mounting a disk using backup superblock (solved now)
on Tue, Sep 04, 2001 at 05:03:08PM +0200, Stephan Hachinger ([EMAIL PROTECTED]) wrote: Hello! Below you see a copy of the last thread I'm referring to. My HDD and especially the superblock no.1 is heavily demaged - but I now have managed to e2fsck the partition using the backup superblock number 32768. Debugfs /dev/hda2 can also show me the contents of the partition, but mount -t ext2 -o sb=32768 /dev/hda2 /mnt just won't mount it and says bad magic number etc. Can anyone please tell me what I'm missing? Does mount calculate the superblock offset in another way or should I give up or??? I need this data desperately as I mentioned. If anyone can help me, thanks thousand times in advance. Can't help you on disk forensics, but I *strongly* recommend you image the disk to known good media before you tweak with it. Your debug tools should work on the disk image equally as with the physical disk, with the added bonus that it's not likely to go bad (or worse). Hmm, if I'd only have a HDD to save the data, I would be happy :) ; then I could probably do dd if=/dev/hda2 of=/dev/xyz and e2fsck - b 32768 /dev/xyz, e2fsck would restore the first superblock and my problems were gone... but I have no second hard disk which is that big :(. Cheers and thanks anyway, Stephan OK, just wanted to tell you the solution - while the block number which must be given to mount is based on the blocksize which is installed on the hard disk (4k in my case), the block number which must be given to mount is calculated on a 1k-block-basis, so I had to multiply 32768*4. Cheers, Stephan
Re: Mounting a disk using backup superblock [was: Re: My superblock has been destroyed - please help!]
on Tue, Sep 04, 2001 at 05:03:08PM +0200, Stephan Hachinger ([EMAIL PROTECTED]) wrote: Hello! Below you see a copy of the last thread I'm referring to. My HDD and especially the superblock no.1 is heavily demaged - but I now have managed to e2fsck the partition using the backup superblock number 32768. Debugfs /dev/hda2 can also show me the contents of the partition, but mount -t ext2 -o sb=32768 /dev/hda2 /mnt just won't mount it and says bad magic number etc. Can anyone please tell me what I'm missing? Does mount calculate the superblock offset in another way or should I give up or??? I need this data desperately as I mentioned. If anyone can help me, thanks thousand times in advance. Can't help you on disk forensics, but I *strongly* recommend you image the disk to known good media before you tweak with it. Your debug tools should work on the disk image equally as with the physical disk, with the added bonus that it's not likely to go bad (or worse). Hmm, if I'd only have a HDD to save the data, I would be happy :) ; then I could probably do dd if=/dev/hda2 of=/dev/xyz and e2fsck - b 32768 /dev/xyz, e2fsck would restore the first superblock and my problems were gone... but I have no second hard disk which is that big :(. Cheers and thanks anyway, Stephan
Mounting a disk using backup superblock [was: Re: My superblock has been destroyed - please help!]
Hello! Below you see a copy of the last thread I'm referring to. My HDD and especially the superblock no.1 is heavily demaged - but I now have managed to e2fsck the partition using the backup superblock number 32768. Debugfs /dev/hda2 can also show me the contents of the partition, but mount -t ext2 -o sb=32768 /dev/hda2 /mnt just won't mount it and says bad magic number etc. Can anyone please tell me what I'm missing? Does mount calculate the superblock offset in another way or should I give up or??? I need this data desperately as I mentioned. If anyone can help me, thanks thousand times in advance. Cheers, Stephan On Fri, 31 Aug 2001 17:33:51 -0400 [EMAIL PROTECTED] wrote: In linux.debian.user, you wrote: Hello! Hmm, the subject says almost everything... my almost new (!) IBM hard disk suddenly had some bad sectors and one was the superblock of my linux partition. So, I cannot boot into linux any more, and if I try to e2fsck the partition, e2fsck doesn't find the superblock. (...snip...) I just desperately want to rescue my data before I send the drive back to IBM or so because they will probably send me a new HDD but not my old data, and of course I have not made backups, stupid me. The partition is /dev/hda2 and about 7.7 GB (snip) Additional backup superblocks can be determined by using the mke2fs program using the -n option
Re: Mounting a disk using backup superblock [was: Re: My superblock has been destroyed - please help!]
number etc. Can anyone please tell me what I'm missing? Does mount calculate the superblock offset in another way or should I give up or??? I need this data desperately as I mentioned. If anyone can help me, thanks thousand times in advance. if your that desperate are data recovery companies out of the question? 2cents. Hi! I'm not _that_ desperate ;) that I'd call a recovery company as a professional recovery costs tons of money (I'm still a student). I just want to get the data back because there's about 20 hrs of very nasty work (self-drawn maps of munich) stored on this hdd. As the hard disk still responds partially, I only have to mount it (the partition is even clean and e2fscked already!) and now have the problem that mount does not find this superblock. Cheers, Stephan
Re: My superblock has been destroyed - please help!
On Fri, 31 Aug 2001 17:33:51 -0400 [EMAIL PROTECTED] wrote: In linux.debian.user, you wrote: Hello! Hmm, the subject says almost everything... my almost new (!) IBM hard disk suddenly had some bad sectors and one was the superblock of my linux partition. So, I cannot boot into linux any more, and if I try to e2fsck the partition, e2fsck doesn't find the superblock. Also, if I try with -b 8193 or -b 16385, e2fsck says that these blocks contain a bad magic number. Hmm, I've read that these blocks should actually be superblock backups but I think since my fs was made with the new default sparse_superblocks option, the backups are perhaps somewhere else. Can anyone please help me with this issue? I just desperately want to rescue my data before I send the drive back to IBM or so because they will probably send me a new HDD but not my old data, and of course I have not made backups, stupid me. The partition is /dev/hda2 and about 7.7 GB. I also have a possibility to temporarely store up to 12 GB of data on hda1, a fat32 partition which scandisk could obviously stabilize more or less after a bad block marking. At the moment, I'm trying to dd /dev/hda2 into a file on /dev/hda1 but there seems to be a problem with the maximal file size on fat partitions (does anyone know about that?). Regards and thanks in advance, Stephan This is from the e2fsck manpage: The location of the backup superblock is dependent on the filesystem's blocksize. For filesystems with 1k blocksizes, a backup superblock can be found at block 8193; for filesystems with 2k blocksizes, at block 16384; and for 4k blocksizes, at block 32768. Additional backup superblocks can be determined by using the mke2fs program using the -n option to print out where the superblocks were created. The -b option to mke2fs, which specifies blocksize of the filesystem must be specified in order for the superblock locations that are printed out to be accurate. Yeah, this was exactly what I needed! Now I have the offsets of my superblocks and I'm running e2fsck at the moment. Thanks very much, Stephan
Re: My superblock has been destroyed - please help!
On Fri, 31 Aug 2001 23:51:55 -0700 Karsten M. Self kmself@ix.netcom.com wrote: on Fri, Aug 31, 2001 at 09:19:36PM +0200, Stephan Hachinger ([EMAIL PROTECTED]) wrote: Hello! Hmm, the subject says almost everything... my almost new (!) IBM hard disk suddenly had some bad sectors and one was the superblock of my linux partition. So, I cannot boot into linux any more, and if I try to e2fsck the partition, e2fsck doesn't find the superblock. Also, if I try with -b 8193 or -b 16385, e2fsck says that these blocks contain a bad magic number. Hmm, I've read that these blocks should actually be superblock backups but I think since my fs was made with the new default sparse_superblocks option, the backups are perhaps somewhere else. Can anyone please help me with this issue? I just desperately want to rescue my data before I send the drive back to IBM or so because they will probably send me a new HDD but not my old data, and of course I have not made backups, stupid me. The partition is /dev/hda2 and about 7.7 GB. I also have a possibility to temporarely store up to 12 GB of data on hda1, a fat32 partition which scandisk could obviously stabilize more or less after a bad block marking. At the moment, I'm trying to dd /dev/hda2 into a file on /dev/hda1 but there seems to be a problem with the maximal file size on fat partitions (does anyone know about that?). Please set your linewrap to 72 characters. -- Karsten M. Self kmself@ix.netcom.com http://kmself.home.netcom.com/ What part of Gestalt don't you understand? There is no K5 cabal http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org Free Dmitry! Boycott Adobe! Repeal the DMCA! http://www.freesklyarov.org Geek for Hire http://kmself.home.netcom.com/resume.html Hello! Sorry but I didn't notice that the sylpheed installation on my old computer didn't have this as default. Cheers, Stephan
My superblock has been destroyed - please help!
Hello! Hmm, the subject says almost everything... my almost new (!) IBM hard disk suddenly had some bad sectors and one was the superblock of my linux partition. So, I cannot boot into linux any more, and if I try to e2fsck the partition, e2fsck doesn't find the superblock. Also, if I try with -b 8193 or -b 16385, e2fsck says that these blocks contain a bad magic number. Hmm, I've read that these blocks should actually be superblock backups but I think since my fs was made with the new default sparse_superblocks option, the backups are perhaps somewhere else. Can anyone please help me with this issue? I just desperately want to rescue my data before I send the drive back to IBM or so because they will probably send me a new HDD but not my old data, and of course I have not made backups, stupid me. The partition is /dev/hda2 and about 7.7 GB. I also have a possibility to temporarely store up to 12 GB of data on hda1, a fat32 partition which scandisk could obviously stabilize more or less after a bad block marking. At the moment, I'm trying to dd /dev/hda2 into a file on /dev/hda1 but there seems to be a problem with the maximal file size on fat partitions (does anyone know about that?). Regards and thanks in advance, Stephan
Re: hardware supportato
Hello! Per favore, iscrivi alla lista debian-italian perche io capisco che vuoi dire ma non posso scrivere una risposta perche il mio italiano e troppo cattivo :( Ciao, Stephan On Mon, 30 Jul 2001 22:19:42 +0200 marco e marisa [EMAIL PROTECTED] wrote: ho un computer con processore Pentium 75 Mhz e vorrei montarci una versione di linux debian con word processor. Quale verisone open source posso montare?
Re: c++ conversion
Hi! Yeah, there are just some packages on your computer missing. Try apt-get install g++. If that doesn't help, and there's still a file missing, you can go to http://www.debian.org/distrib/packages ;the lower search form is a search for files in the distro. It gives you the names of the packages the missing files are in, and so you can apt-get them. Cheers, Stephan On Sun, 22 Jul 2001 16:46:09 -0500 David Turetsky [EMAIL PROTECTED] wrote: I would like to migrate some large c/c++ programs from Windows to Linux. Right now I'm invoking gcc -- and even for the most trivial program I am getting the error message: installation problem, cannot exec 'cc1plus': no such file or directory I'm also surprised to see that g++ is not recognized on the command line, nor included header files such as iostream.h I've written some decent-sized stuff in c++ and don't recall running into such problems, but then my memory used to be better I am reading Swan's book on GNU C++ for Linux and starting to work my way through the info docs My response has been to get-apt upgrade gcc, which I am in the middle of. Not sure if this will address my problem. Was surprised to see the huge size of the upgrade. Of course that means I am running under the old code (gcc 2.95.2) Any gentle recommendations and pointers toward good documentation is much appreciated! -- David - www.richsob.com If the master dies and the disciple grieves, the lives of both have been wasted. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Installing KDE2 from cvs
On Wednesday 11 July 2001 23:11, Stephan Hachinger wrote: - Original Message - From: tim [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Cc: debian-user@lists.debian.org Sent: Wednesday, July 11, 2001 11:42 AM Subject: Re: Installing KDE2 from cvs Now that have tried to build the packages I have the following problem: ---code ---moc.y:1128: type clash (`' `string') on default action make[2]: *** [mocgen.cpp] Error 1 make[2]: Leaving directory `/home/tim/kdecvs/qt-copy/src/moc' make[1]: *** [src-moc] Error 2 make[1]: Leaving directory `/home/tim/kdecvs/qt-copy' make: *** [shared-stamp] Error 2 ---code rm mocgen.cpp cvs update (your file has a conflict) -- David FAURE, [EMAIL PROTECTED], [EMAIL PROTECTED] http://perso.mandrakesoft.com/~david/, http://www.konqueror.org/ KDE, Making The Future of Computing Available Today
Re: Installing KDE2 from cvs
tim wrote: Hello Konquereor crashes on me with most javascripts, since the last update in sid. Dissable is not really an option so I like to try installing from cvs. I have never compiled Kde or any other big thing except kernels0. My question is whether I have to uninstall my running KDE or just make it with prefix . Will this possibly mess my system ? In generally any tips are welcome! tim There are usually debian packaging scripts included in the sources, so that you can download the sources, change into the source directories and just call dpkg-buildpackage (from dpkg-dev) to build debian packages from the sources. Sometimes, the file /debian/rules cannot be executed in this process because of wrong permissions and dpkg complains, then you just have to chmod. When you install those generated .deb packages, older versions are automatically uninstalled by dpkg. If you've already installed something by make install, I'd recommend to do a make uninstall first. I think the deb installation is much cleaner than other ways. Cheers, Stephan
Re:
Hello! I think you can order debian CD's from the vendors which are mentioned on the following site: http://www.debian.org/distrib/vendors Or you can download a cd image at a ftp server and burn your own cd. The list of servers is here: http://www.debian.org/distrib/ftplist (The list in the middle of the page is the right one for the iso images. For burning them you need an appropriate burning program). The latest stable version of Debian is potato (2.2r3). That's the right distribution for setting up a rock solid system, but the packages tend to be a little outdated. If you want to set up a desktop system with newest software, Libranet Linux (a Debian derivate; http://www.libranet.com/) may be a good choice; I think it's also quite easy to install. You can order it on cd for $25; you are allowed to make as many copies from the CDs as you want after having ordered it. Regards, Stephan P.S.: Please switch your mail application to text-only mode for this list and use a subject line describing the problem you have. - Original Message - From: Jenner Almánzar To: debian-user@lists.debian.org Sent: Wednesday, June 06, 2001 9:32 PM G'day What's the latest version of GNU Linux Debain? How can i get it on CD? Jenner Internet Telecomunicaciones Calle Padre Emiliano Tardif No.36, Evaristo Morales Santo Domingo, Dominican Republic Office (809) 541 5652 Cell Phone (809) 222 5053 E-mail [EMAIL PROTECTED]
Re:
Hallo! Jo, ich bin zwar grad wieder mal im Stress, deshalb bitte ich Dich, Dich an Andere zur Hilfe zu wenden, aber... warum Deine mail bisher anscheinend noch keiner beantwortet hat... das Format der Nachricht sollte kein HTML (RichText) sondern nur reiner Text sein; das Betreff möglichst aussagekräftig. Aja, und es gibt eine spezielle deutsche Liste: debian-user-de, falls Du in deutsch diskutieren willst; hier in debian-user gibt es normalerweise nur auf Englische mails 'ne Antwort. Debian ist übrigens nicht am einfachsten zu installieren; wenn Du aber etwas Erfahrung mit DOS oder dem was unter der Win-Oberfläche ist hattest, wirst Du es sicher schaffen und Freude haben :) Grüße, Stephan in English: Because I'm stressed at the moment, please contact others for help; but the reasons that your mail has not yet been replied to, are probably: Writing a HTML mail; missing subject; wrong language - please contact the guys at debian-user-de for German discussion. Debian is, BTW, not the easiest distro to install but if you have expirence with DOS or what is behind the surface of windows, you will succeed. - Original Message - From: Firas-Sadat To: debian-user@lists.debian.org Sent: Thursday, May 31, 2001 6:45 PM Ich hab mich bei der Installation von Debian an die Installationsanleitung von Mark Stone gehalten. Doch an dem Punkt Das System konfigurieren scheitere ich, da es in der Installationsanleitung so aussieht, als hätte das System nach dem Login eine Windowsähnliche Oberfläche. Doch die Oberfläche auf der ich mich befinde, gleicht eher Dos. Ich hab die Installation mehrfach wiederholt und auch versucht neue packages über deselect zu installieren, aber komme dort einfach nciht weiter. Wer kann mir helfen?
Re: (OT) Storage (8*IDE HDs) any experiences? - diodes
Hi! at these extremes... the diodes wont helpand the dioes will simply burn up due to the current it has to pass to get to that voltage one side being a diode drop ( 0.7v ) across itself.. - a power mosfet is better suited ... hmm, mosfet doesn't make sense to me - IIRC they only work like switches I think you should use Shotkey-diods the largest one i know could pass 200 ampere - and they've less than ~0.4V voltage drop Hi! Mosfets are a kind of transistors with less loss of energy than a bipoar type. I agree that the only thing you could use is a shottky diode, the drop is about 0.1-0.2 Volts, I think; therefore it won't produce so much heat and maybe you won't even need any heatsinks for them. But I think it is generally not a good thing to reduce the supply voltage by 0.2 Volts this way, because computers are very sensitive to voltage changes... If there will be a high load for only a short time, the voltage maybe drops down the specs and your components are down. Regards, Stephan Hachinger
Re: AWE64 Configuration...
Hello!
I don't really know what the problem with your config is, but I can tell you
it'll probably work fine if you compile the drivers as modules (don't forget
to give the parameters you've set in isapnp.conf to them). But I guess the
problem with your config is, that the driver initializes first, and then you
change the adresses etc. of your pnp hardware via isapnp. I'd try once with
an empty isapnp.conf file - maybe it works then.
Regards,
Stephan
P.S.: As for myself, I also use alsa, because I've now got a new pci card
which doesn't work with oss drivers.
James K. Wiggs wrote:
Folks,
First off, I don't have access to my machine that's receiving
mail from the debian-user mailing list right now, so please respond
via email as well as to the list if at all possible. If not, I will
not see your reply for 3-4 days. Now, on to the fun...
I've been tearing my hair out trying to get my AWE64 working
again after switching from RedHat 6.2 to Debian 2.2r2. Can anyone
tell me what I'm missing, here?
Here's the contents of /dev/sndstat:
herald:~# cat /dev/sndstat
OSS/Free:3.8s2++-971130
Load type: Driver compiled into kernel
Kernel: Linux herald 2.2.18pre21 #16 Fri Mar 9 08:23:54 PST 2001 i586
Config options: 0
Installed drivers:
Card config:
Audio devices:
0: Sound Blaster 16 (4.16) (DUPLEX)
Synth devices:
0: AWE32-0.4.3 (RAM512k)
1: Yamaha OPL3
Midi devices:
0: Sound Blaster 16
1: AWE Midi Emu
Timers:
0: System clock
Mixers:
0: Sound Blaster
Here's the contents of isapnp.conf:
herald:~# cat /etc/isapnp.conf
# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21 (library isapnptools-1.21)
#
# Trying port address 0273
# Board 1 has serial identifier 89 10 cd b3 70 e4 00 8c 0e
# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier 89 10 cd b3 70 e4 00 8c 0e)
# Vendor Id CTL00e4, Serial Number 281916272, checksum 0x89.
# Version 1.0, Vendor version 1.0
# ANSI string --Creative SB AWE64 PnP--
# Vendor defined tag: 73 02 45 20
#
# Logical device id CTL0045
(CONFIGURE CTL00e4/281916272 (LD 0
# ANSI string --Audio--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# IRQ 5.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 1.
# 8 bit DMA only
# Logical device is a bus master
(DMA 0 (CHANNEL 1))
# Next DMA channel 5.
# 16 bit DMA only
# Logical device is a bus master
(DMA 1 (CHANNEL 5))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0220
# IO base alignment 1 bytes
# Number of IO addresses required: 16
(IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0330
# Maximum IO base address 0x0330
# IO base alignment 1 bytes
# Number of IO addresses required: 2
(IO 1 (SIZE 2) (BASE 0x0330))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 1 bytes
# Number of IO addresses required: 4
(IO 2 (SIZE 4) (BASE 0x0388))
# End dependent functions
(NAME CTL00e4/281916272[0]{Audio })
(ACT Y)
))
#
# Logical device id CTL7002
(CONFIGURE CTL00e4/281916272 (LD 1
# Compatible device id PNPb02f
# ANSI string --Game--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0200
# Maximum IO base address 0x0200
# IO base alignment 1 bytes
# Number of IO addresses required: 8
(IO 0 (SIZE 8) (BASE 0x0200))
# End dependent functions
(NAME CTL00e4/281916272[1]{Game})
(ACT Y)
))
#
# Logical device id CTL0022
(CONFIGURE CTL00e4/281916272 (LD 2
# ANSI string --WaveTable--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0620
# Maximum IO base address 0x0620
# IO base alignment 1 bytes
# Number of IO addresses required: 4
(IO 0 (SIZE 4) (BASE 0x0620))
#
# I've added these based upon a help posting I found in the
# debian-user archives...
#
(IO 1 (BASE 0x0A20))
(IO 2 (BASE 0x0E20))
#
Re: burning potato iso's for an older CDROM
Hello! I'd also give a real cdr media a try if you have previously burned a cdrw... if you have old drives, it's very probable that they can't read cdrws, but I could even read cdrs with two old 1x-speed drives I had. And with a ten-year-old diskman, too. Kind Regards, Stephan Hachinger - Original Message - From: Forrest English [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: debian-user@lists.debian.org Sent: Tuesday, February 27, 2001 11:34 PM Subject: Re: burning potato iso's for an older CDROM are you reffering to a cdr-drive? or a cdr cd? i ment the cd in case i said somthing stupid. the drives, it doesn't matter. some cdroms are to old for rw's, but can read once write just fine. i'd give that a shot. but i mean, my thinkpad's cdrom is to old to read cdrs or cdrws, and it's annoying. cause i have to do floppy installs. and i don't HAVE any pressed cds. -- Forrest English http://truffula.net When we have nothing left to give There will be no reason for us to live But when we have nothing left to lose You will have nothing left to use -Fugazi On Tue, 27 Feb 2001 [EMAIL PROTECTED] wrote: does it matter that it was burned on a cdrw instead of a cdr? On Tue, 27 Feb 2001, Forrest English wrote: you can't. if the cdrom is to old to read burns. it's just to old to read burns. :( -- Forrest English http://truffula.net When we have nothing left to give There will be no reason for us to live But when we have nothing left to lose You will have nothing left to use -Fugazi On Tue, 27 Feb 2001 [EMAIL PROTECTED] wrote: I have an oold cdrom that seems to work fine with commericial CD's. Reads rh6.x and windows install cd's fine It will not read the debian potato CD i burned off the web fyi: this same CD works read/boots fine in my newer CD-ROM How can i burn the ISO image so the old drive will read it? mode1? 2? cdrecord and adaptec easyCD creater instructions would be helpful thank you -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: staroffice5.2 and missing libs
Hello! I couldn't find any of those files in the debian distribution (searched in contents of the distro on http://www.debian.org/distrib/packages). I know that probably doesn't help you very much, but I have no idea where those libs come from... at least you know now that they aren't from any free debian package - could only be in non-free or non-us, perhaps because I don't know if they are included in the search. Hope this helps a little bit :) Kind Regards, Stepan Hachinger - Original Message - From: Sebastiaan [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Tuesday, February 27, 2001 11:23 PM Subject: ot: staroffice5.2 and missing libs Hi, I had installed staroffice a couple of months ago and everything worked fine. When I tried to start it again last week, it failed. With ldd, I discovered that I miss a lot of libs, all having the number '569'. One of them is: libgo569li.so I reinstalled, searched my harddisk for the lib, but I was unable to find it. Does anyone know which package contains these libs? I am also very happy with the output of ldd, e.g.: ldd /usr/local/office52/program/soffice.bin and tell me in which directory the 569 libs can be found. Thanks in advance! Sebastiaan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 386-4 MB startup question
Hello! At least inside germany, one can send a letter and the recipient has to pay for the fees if the sender wants him to... I think I'll try to do that and if don't succeed, I'll pay the few marks, because any sending of money would almost cost more than the amount you'd have to send to me. Do you want Debian 2.1 cds or 2.2 ones or both? Do you need any boot disks (perhaps for a virus-free boot?)? Regards, Stephan Hachinger Plettstr. 73 81735 München Germany - Original Message - From: DSC Lithuania [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Saturday, January 20, 2001 8:37 PM Subject: Re: 386-4 MB startup question Actually, probably 8 would be best, just in case there were mismatch problems. (our old 4 + your new 4 might cause some kind of mismatch problem, in which case we couldn't use them. But getting 8 would prevent that kind of problem.) Thanks. Can you give me an address to send payment to? Also name your currency; I can probably make the transfer in the proper form without too much trouble (probably marks, but you might want something different). - Michael Rudmin 8-4 Laisves Kvartalas 5730 Silute, Lietuva -Original Message- From: Stephan Hachinger [EMAIL PROTECTED] To: DSC Lithuania [EMAIL PROTECTED]; Debian User debian-user@lists.debian.org Date: Friday, January 19, 2001 4:38 PM Subject: Re: 386-4 MB startup question Hello! Hmm, as I said, a mass of those modules are just lying around here, so you have to pay nothing for it... it would be good if you could pay the transport fees (ca. $4 or something like that), and that's it. How many modules do you need? Kind Regards, Stephan Hachinger - Original Message - From: DSC Lithuania [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Wednesday, January 17, 2001 9:19 PM Subject: Re: 386-4 MB startup question Hello! The parity message doesn't seem like a real error to me, but exactly like the behaviour of the parity boot b boot sector virus. What do you think?? I think since the computer I was transferring files between and this one *also* developed the same error, that you are exactly right. I've got F-PROT, and am going to go to war against the virus. Also, I would appreciate the memory, if you'd be willing to send it. And if you are going to ship the one, then the Debian 2.2 would also be good. Sooner or later (probably the latter) I expect to really upgrade the memory and/or motherboard, and when that happens the Debian 2.2 upgrade will be ideal. How much would you like for it all? - Mike Rudmin 8-4 Laisves Kvartalas 5730 Silute, Lithuania / Lietuva V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v Below this line: My own approximate version of the Lithuanian national fairy tale. It would make an excellent HOWTO 8- . Read if you want, ignore if you want. The story of Egle and the snake-king Once there lived a girl named Egle. She lived with her parents, two sisters, and three brothers. One day, she and her sisters went swimming, and when they were done she discovered that there was a snake in her clothes. Now, this snake was of a kind that is considered to be good luck; but still Egle wanted her clothes back, so she asked the snake please give me my clothes. The snake replied I will if you promise to marry me. Egle, thinking that this was all a joke, agreed, and the snake left the clothes. She put the clothes on, went home, and told her parents everything that had happened. Several days later, her village was inundated with snakes. The snakes approached her parents, and asked for Egle's hand in marriage for their king. Egle's father decided to try to give them a duck that was dressed in Egle's clothes, and indeed the snakes left with the duck. However, as the snakes went into the forest, a cuckoo bird said That's not Egle. So the snakes took the duck back again, and demanded Egle. Again, the father tried to give them a sheep in Egle's clothes. Again, the snakes took the sheep, and again the journey was interrupted by the cuckoo bird. At last, Egle's parents gave their daughter to the snakes, and the snakes took Egle to a fabulous palace under the sea. There, the new bride met her groom, and discovered that he was not a snake, but a magical and handsome prince named Zilvinas. She fell in love at once, and they were married. Some time passed, and Egle had four children, three boys and one girl. After this time, Egle was lonesome for her family, and asked Zilvinas if she could visit them. Now, Zilvinas knew that Egle's family would try to kill him if they could, so he said no. But she begged so hard that he relented, but said I set before you three tasks. When you have completed
Re: 386-4 MB startup question
Hello! Hmm, as I said, a mass of those modules are just lying around here, so you have to pay nothing for it... it would be good if you could pay the transport fees (ca. $4 or something like that), and that's it. How many modules do you need? Kind Regards, Stephan Hachinger - Original Message - From: DSC Lithuania [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Wednesday, January 17, 2001 9:19 PM Subject: Re: 386-4 MB startup question Hello! The parity message doesn't seem like a real error to me, but exactly like the behaviour of the parity boot b boot sector virus. What do you think?? I think since the computer I was transferring files between and this one *also* developed the same error, that you are exactly right. I've got F-PROT, and am going to go to war against the virus. Also, I would appreciate the memory, if you'd be willing to send it. And if you are going to ship the one, then the Debian 2.2 would also be good. Sooner or later (probably the latter) I expect to really upgrade the memory and/or motherboard, and when that happens the Debian 2.2 upgrade will be ideal. How much would you like for it all? - Mike Rudmin 8-4 Laisves Kvartalas 5730 Silute, Lithuania / Lietuva V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v V v Below this line: My own approximate version of the Lithuanian national fairy tale. It would make an excellent HOWTO 8- . Read if you want, ignore if you want. The story of Egle and the snake-king Once there lived a girl named Egle. She lived with her parents, two sisters, and three brothers. One day, she and her sisters went swimming, and when they were done she discovered that there was a snake in her clothes. Now, this snake was of a kind that is considered to be good luck; but still Egle wanted her clothes back, so she asked the snake please give me my clothes. The snake replied I will if you promise to marry me. Egle, thinking that this was all a joke, agreed, and the snake left the clothes. She put the clothes on, went home, and told her parents everything that had happened. Several days later, her village was inundated with snakes. The snakes approached her parents, and asked for Egle's hand in marriage for their king. Egle's father decided to try to give them a duck that was dressed in Egle's clothes, and indeed the snakes left with the duck. However, as the snakes went into the forest, a cuckoo bird said That's not Egle. So the snakes took the duck back again, and demanded Egle. Again, the father tried to give them a sheep in Egle's clothes. Again, the snakes took the sheep, and again the journey was interrupted by the cuckoo bird. At last, Egle's parents gave their daughter to the snakes, and the snakes took Egle to a fabulous palace under the sea. There, the new bride met her groom, and discovered that he was not a snake, but a magical and handsome prince named Zilvinas. She fell in love at once, and they were married. Some time passed, and Egle had four children, three boys and one girl. After this time, Egle was lonesome for her family, and asked Zilvinas if she could visit them. Now, Zilvinas knew that Egle's family would try to kill him if they could, so he said no. But she begged so hard that he relented, but said I set before you three tasks. When you have completed them, you may visit your family. The first task was to wear a pair of iron shoes until they wore out. The second task was to make lace without any yarn. The third task waa to carry water in a pail full of holes. Now, if Egle had done these things herself, and figured them out, she would have been fine. But she considered the tasks impossible, and instead asked an old witch for the answers. The witch told her how to do each task, and she did them. Her husband knew that she had cheated; but he had promised and was true to his word. So he said You may go for seven days only, but the eighth day you must return. Come to the seashore and call me by name, and I will come to you on waves of milk. So Egle went off with her children. For seven days she visited her family, and they pressed her to stay. And indeed, she missed them so much that she decided what can one day hurt? But when her family saw that she wanted to stay, they decided that her marriage to Zilvinas was indeed a mistake. So her brothers cornered her children, and began beating them, asking how do we call your father, and where is he? Now, the child named Oak stood strong, and so did his brothers Birch and Poplar. But the youngest, a little girl named Elm , was flighty and fluttery like the leaves of the Elm, and her strength was no greater than that of the elm, whose branches shatter at the first storms of winter. So before long, she told the brothers her father's name, and how to call him. Then they went down
Re: Burning ISO-Image in Windows?
Hello! If all else fails, use cdrecord for windows. You can download it and get documentation about the command line parameters at this site: http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/ cdrecord.html binary downloads for win32: ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/alpha/win32/ Normally you only need to do the following: 1.) cdrecord -scanbus It will give you a few device numbers like 2,1,0 or something like that, and one is the appropriate for your cdr drive. 2.) cdrecord -speed x dev=w,y,z name of iso file where w,y,z are the numbers from -scanbus and x is the recording speed. Regards, Stephan Hachinger - Original Message - From: BUND Regionalverband Stuttgart [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Tuesday, January 16, 2001 12:24 PM Subject: Burning ISO-Image in Windows? Hi, I´ve downloaded the ISO-Image from the Debian-Homepage, but I can´t find a way to burn it. Nero doesn´t work with the options told in the faq. Fireburner also doesn´t work. Can anyone provide me a freely available program that is able to burn the ISO? Bye, Hanno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 386-4 MB startup question
Hello! The Parity Check message could be the result of bad memory, but I don't think so, instead I think that this computer is infected by the parity boot b virus, which does nothing bad except of halting the system sometimes and displaying this message... you can clean your computer with f-prot, a quite goot antivirus program; it's free for non-commercial use and if you use it commercially I think it's 30day trialware. But be sure to have a virus-clean dos boot disk with sys.com and fdisk.??? on it because the removal of the virus may corrupt the boot sector so that your machine won't boot up any more until you fdisk /mbr and sys the harddisk. And... maybe you cannot find/remove the virus when it's in memory, so you'll perhaps need a boot disk with f-prot on it... producing this disk is quite complicated as it f-prot needs much more then the space on one disk... So you should take the old version which needs less space... if you need it, I could send you a disk image of a boot disk. But you'll have to switch the date of your PC to 1/1/1998 because if you don't do so this old version will only tell you it's outdated and it will exit :). Link to F-PROT: ftp://ftp.simtel.net/pub/simtelnet/msdos/virus/fp-308b.zip old version: ftp://ftp.unina.it/pub/Pcibm/antivirus/fprot/fp-228.zip or search at http://ftpsearch.lycos.com I can send you an additional 4megs of 1MB SIM 30pin ram modules if you want because I've got many of them just lying around. And also, if you want, a Debian 2.1 two-CD distribution, also lying around... I think it'll install because it's got an older 2.0 kernel. Hmm, and this problem with the NIC... are you sure you have switched off pnp mode of this card, because the 386 bios won't handle pnp cards? Regards, Stephan Hachinger from Munich, Germany - Original Message - From: Joey Hess [EMAIL PROTECTED] To: DSC Lithuania [EMAIL PROTECTED] Cc: debian-user@lists.debian.org Sent: Sunday, January 14, 2001 2:16 AM Subject: Re: 386-4 MB startup question DSC Lithuania wrote: Does anyone have a suggestion on what I can do to get this system up and running? I am hoping to get this successfully installed on the computer that hasn't run before, because that becomes an increase in our assets without additional risk. Have you thought about removing the hard disk and putting it in a computer with more memory, and doing the install there? Debian should run in 4mb, if you can get it installed. -- see shy jo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ALSA with AWE64: help
Hello! I think it isn't really a problem which has something to do with your alsa config, but I think that the module for awe32 simply doesn't detect the i/o port of your awe unit, for example because your isapnp conf has been messed up. I suggest to you looking at your isapnp.conf and the module parameters at modconf first, and if this doesn't help setting up alsa because it took a while for me to setup my alsa properly. Or, if you haven't compiled your awe driver as a module, I'd try this. If you cannot find any error in your current configuration and want to give alsa a try, you can send me a mail and I'll do my best to give you a description of how to set up alsa (don't know it exactly at the moment- I'll have to take a look at my machine ;)). Regards, Stephan Hachinger - Original Message - From: Maciej Kalisiak [EMAIL PROTECTED] To: debian-user mailing list debian-user@lists.debian.org Sent: Thursday, January 04, 2001 6:57 PM Subject: ALSA with AWE64: help Hi, I've had sound and MIDI working great on my box for the longest time with just the plain, non-alsa sound stuff (the OSS drivers?), and then I installed a package which also required the alsa-base package. Since then I haven't been able to use MIDI, and I suspect the digital audio I get is still using the old drivers, and ALSA is simply busted on my box. So are there any docs somewhere on how to properly install a complete ALSA setup? BTW, I have a AWE64 value sound card (which, again, worked completely prior to alsa-base). I think ALSA is busted here because I get stuff like this on bootup: AWE32: not detected Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 4.16 detected OK (220) or when I finish running alsaconf: Loading driver: Starting ALSA sound driver (version none): no driver installed. Setting the PCM volume to 100% and the Master output volume to 50% The ALSA sound driver was not detected in this system. Could not initialize the mixer, the card was probably not detected correctly. I suspect that I might need to install alsadriver (which is one of the alsa-modules-* debs), but then I can't use the kernel I built myself (which does have AWE and sound support, as it works without ALSA), or rather I'm weary of having apt-get mess around with my kernel bits. -- Maciej Kalisiak [EMAIL PROTECTED] www.dgp.toronto.edu/~mac -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 2.4 kernel rescue disk?
Hello! Hmm, I think the easiest way to create a boot floppy is to take an existing bootfloppy with the syslinux loader on it (for example a debian rescue), then compiling a kernel with the necessary drivers and patches (but no modules!!!; also be sure that you have compiled in some things syslinux requires - see readme files on the boot floppy), and putting this kernel on the disk instead of the default kernel. I don't know if this works with the 2.4 ones, but it has worked with 2.2 and 2.0, so I don't think there will be any problems... Regards, Stephan Hachinger - Original Message - From: Jon Pennington [EMAIL PROTECTED] To: Mark Phillips [EMAIL PROTECTED] Cc: debian-user@lists.debian.org Sent: Friday, January 05, 2001 5:43 PM Subject: Re: 2.4 kernel rescue disk? Mark Phillips wrote: Is there any way I can create my own custom rescue disk? Is there a package for doing this? Is there a HOWTO? I'm pretty new to this list, but this has come up a lot. Have a look at: # man make-kpkg # man mkboot -- -=|JP|=-Why, oh, why didn't I take the blue pill? Jon Pennington| Atipa Linux Solutions -o) [EMAIL PROTECTED] | http://www.atipa.com/\\ Kansas City, MO, USA | 816-595-3000 x1550 _\_V 6D04 39E0 CAE9 9ADA 2CA3 2EBE 898A 6C37 CA1E A29C -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Setup of X 4.0 and ALSA
Hello! I neither have woody nor X4.0 but I think I can give you some hints on the alsa issue. It does a good job at my machine with an ESS card. I compiled it myself. For doing this, you need the sources of your kernel in /usr/src/linux. Then download the alsa sources from www.alsa-project.org. You need alsa-driver, alsa-lib and alsa-utils. There are scripts included in these which compile the sources and produce rpm packages automatically. I called them and then converted the rpms to debs using alien. The resulting debs are really fine, after I installed them I found a whole bunch of alsa soundcard modules in my modules directory, and I just configured them by using modconf. There's also a kind of setup utility included in alsa but I think I just didn't need it and gave the proper module parameters directly in modconf. See www.alsa-project.org about the proper parameters and about the module name which is right for your soundcard - and don't forget to install the OSS emulation modules, of course. And you mustn't forget to unmute the devices by using alsamixer or for example the kde mixer before you want to listen to music because all devices are muted by default if you use alsa. At my machine, the kde2 mixer unmutes them at kde startup - I only had to unmute them once. If you can get the soundcard to work by using oss or kernel-included modules, then better don't spend time on setting up alsa. If the drivers included in the kernel distribution aren't working properly, alsa is surely worth a try - especially because you can create the debs quite easily. Kind Regards, Stephan Hachinger - Original Message - From: Preben Randhol [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Tuesday, December 26, 2000 10:09 AM Subject: Setup of X 4.0 and ALSA How do I setup X 4.0 on my machine. I upgraded my father's machine to woody, and it gave me a world of troubles as I lost the ISDN connection, X and sound. But now I have gotten all back. Except that I would now like to setup X 4.0 for him and setup an alsa module to handle the sound (the ESS SOLO1 has been a little troublesome earlier with 2.2.15, but it seems better now with .18pre21) But I got a lot of problems after installing the alsa modules. depmode was complaining greatly about unresolved things. Is there any point in spending time on the ALSA modules at this point? Is there a tool for setting up X 4.0, I can only find the tools for 3.3.6 on my computer and looking at the repository I cannot say I can find any packages that sticks out as being the one I need to install. Thanks in advance. PS: On all the machines I have installed Debian I have gotten problems with the combination X and GPM, isn't it time to drop GPM at startup and let those who only wants the console set it up themselves with rcconf? I reckon they are less newbie than those who use X. -- Preben Randhol -- http://www.pvv.org/~randhol/ -- +---+ There was, I think, never any reason to believe in any innate | ! | superiority of the male, except his superior muscle. +---+ -- Bertrand Russell, Ideas That Have Harmed Mankind (1950) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
(OT) S3 Vision 964 card under dosemu - video bios config
Hello! Although I must confess this is off-topic: Does anyone know how to configure dosemu with this card to run 640*480 vga graphics mode applications? I've already tried the attached config, but when I try to run dosemu, it fails to start. I think it has something to do with the bios adress and size. Here is the information given on this issue by the graphics card manufacturer (ELSA): Video-BIOS-ROM adress: C-C7FFF Any suggestions? Thanks in advance and merrry christmas, Stephan Hachinger dosemu.conf Description: Binary data
Re: Netscape 6.0/konqueor
Hello! Thanks for the information, I have the same libssl installed. I think, the problem with the homebanking site I wanted to access is really that my proxy server doesn't listen https requests. Hmm, till I can fix it I'll access the site from the machine this proxy is running on (a windoze one ;) ), maybe another proxy software has https support. Thanks, Kind Regards, Stephan Hachinger - Original Message - From: Thomas J. Hamman [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Saturday, November 18, 2000 11:44 AM Subject: Re: Netscape 6.0/konqueor On Sat, Nov 18, 2000 at 09:40:56AM +0100, Stephan Hachinger wrote: Hello! Can you please tell me which version your ssl packages are (0.95?) because I also don't have https support and want to veryfy if it's because of the firewall which I use for http connections or if it's because of wrong libs. Stephan, My version of ssl is 0.9.5a-5... it's the current libssl095a in woody. BTW, I've read that there are some sites that, instead of checking to see if you have crypto, they actually just check to see if you're using Netscape or IE and assume you don't have crypto if you're not. That may or may not be the problem, but I _have_ noticed that there are some https sites that work fine for me and some that just refuse the connection. -- Tom Every man...should periodically be compelled to listen to opinions which are infuriating to him. To hear nothing but what is pleasing to one is to make a pillow of the mind. -St. John Ervine
Re: Netscape 6.0/konqueor
Hello! Can you please tell me which version your ssl packages are (0.95?) because I also don't have https support and want to veryfy if it's because of the firewall which I use for http connections or if it's because of wrong libs. Thanks in advance, Stephan Hachinger - Original Message - From: Thomas J. Hamman [EMAIL PROTECTED] To: debian help debian-user@lists.debian.org Sent: Saturday, November 18, 2000 2:26 AM Subject: Re: Netscape 6.0/konqueor On Fri, Nov 17, 2000 at 10:37:13AM -0500, Anderson, Tim TL33E wrote: On my box konqueror has been a breath of fresh air.. with the exception of https support, which isn't there. Anyone know if that's a KDE thing or is it just not compiled into the packages at kde.tdyc.com? I don't know about the kde.tdyc.com stuff, but I seem to have https support using the woody stuff with the kdelibs3-crypto and kdebase-crypto packages installed. -- Tom Most of the greatest evils that man has inflicted upon man have come through people feeling quite certain about something which, in fact, was false. -Bertrand Russell -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Quick Q: Kernel compiling gcc295/gcc272?
Hello! I've always compiled my kernels with gcc295 for over a year now and never run into problems. Seems to work. Regards, Stephan - Original Message - From: Jonathan Gift [EMAIL PROTECTED] To: Debian debian-user@lists.debian.org Sent: Tuesday, November 14, 2000 8:45 PM Subject: Quick Q: Kernel compiling gcc295/gcc272? Hi, I recently compiled my kernel. However, reading through the docs that came with gcc it says clearly that compiling the kernel should be done with gcc272 and not gcc295. I had gcc295 loaded by tasksel and the fine print said not to worry if you had gcc295 because if you used the kernel-pacage it called on gcc272 by itself. Q: Looking at my package list I don't see gcc272 on it. Am I in trouble for having run this on gcc295 even with the kernel-package? Or did in fact use gcc273 somehow, as it stated, and it's not listed? I'm sort of worried here now.. Thanks, Jonathan. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Building kde2 from source packages
Hello! Compiling takes about 24 hours (with kOffice) on my P1/133 machine, so I did my last install with the packages at kde.tdyc.org, but the packages lead to dependency problems :(. These are the steps I did for installing it before I used the packages and which I will probably do again with the final version: 1.) get qt2.2.1 source and kde source packages (at least kde libs, support and base) 1a.) :) unpack the qt tarball in usr/local; rename the unpacked subdir into qt and change your bash configuration according to its readme 2.) unpack all other tar.gzs (i suggest using a special directory for that, although the files will be unpacked into subdirs) 3.) look into the file COMPILING (or something similar) in the kdelibs subdir, and look for the options for building) 4.) change into the qt dir and do ./configure --opts, where opts are the different options which are suggested in the above file (COMPILING) - *VERY IMPORTANT FOR WORKING GIF/JPG SUPPORT!!!* 4a.) do make in the qt dir 5.) change into the kdesupport dir, ./configure, make, make install (will install it in /usr/local/kde) 6.) do the same with the kdelibs 7.) do the same with all other packages (after kdelibs, you can build and install any other packages in any order) 8.) switch to /usr/local/kde/bin/startkde as default window manager Kind Regards, Stephan Hachinger P.S. If you've got any further questions, just send me an email. - Original Message - From: Alwyn Schoeman [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Tuesday, October 17, 2000 1:43 PM Subject: Building kde2 from source packages Hi there, Could anyone maybe give me a quick rundown on the procedure used to build kde2 from the source packages. Do I need to have the kde2 sourcetree somewhere? Thank you Alwyn -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: burning CDs
Hi! Have you already downloaded the .img-images or are you using the pseudo-image-kit and which OS are you using? Kind Regards, Stephan Hachinger - Original Message - From: Umum Wijoyo [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Monday, October 16, 2000 6:12 PM Subject: burning CDs Hi! Can anyone help me to burn some Debian 22 CDs? I'm using the Golden Hawk Technology software. Any reference would be helpful. TIA Umum Wijoyo -- Bandung, Indonesia -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Tru Type Fonts Question
Hello! X cannot handle the ttf dir although xfs is installed. Instead, you must add unix/:7100 to your XF86config, because, I think, xfs-xtt (you must install THIS VERSION, not normal xfs!!!) serves the fonts to X via this tcp port. And you have to create xfonts.scale etc. etc. etc. in the dir with the fonts (I don't know these steps exactly any more, see howto) and the ttf-dir has to be added to the catalog line in the file /etc/X11/xfs/config. 4) Ran the mkttfdir utility. Shouldn't there be a ttmkfdir utility??? Where is it??? Don't know about it, but sounds like they are equal or someone as written the name in a false way in some howto or description you've read! But, all of this isn't necessary if you just download the xfstt package, install and use it. It's really easier to set up, I think, and I don't know any disadvantage of xfstt in comparison to xfs-xtt. I think I'll do this after I've wasted my time setting up xfs-xtt instead of xfstt some weaks ago. ftp://ftp.debian.org/debian/dists/potato/main/binary-i386/x11/xfstt_1.1.deb Kind Regards, Stephan Hachinger - Original Message - From: Christopher W. Aiken [EMAIL PROTECTED] To: Debian Users debian-user@lists.debian.org Sent: Saturday, October 07, 2000 4:45 PM Subject: Tru Type Fonts Question I know how to set up xfstt for true type fonts, but I see that Debian 2.2 uses xfs as a default font server. How do I set up xfs to use my truetype fonts? This is what I did: 1) Installed the fttools package. 2) Created /usr/share/fonts/truetype 3) Copied my 1132 fonts to the above directory. 4) Ran the mkttfdir utility. Shouldn't there be a ttmkfdir utility??? Where is it??? 5) Added /usr/share/fonts/truetype to the /etc/X11/XF86Config file. 6) Re-started the xfs daemon. 7) Re-started X That is when I got the error: Fatal server error. could not open default font 'fixed' What did I do wrong? What am I missing? Where is the ttmkfdir utility? I know xfstt works but I would rather use xfs since it is the default installed server. -- --- Christopher W. Aiken, Scenery Hill, Pa, USA chris at cwaiken dot com, www.cwaiken.com Current O/S: Debian 2.2 GNU/Linux -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: 3c509 troubles
Hello! Maybe, it could be a normal hardware resource conflict. But, why is the module loaded properly although the card has a conflict? I think, the card has a resource conflict, but the 3c509 module doesn't detect it. When ifconfig wants to configure the interface, it therefore cannot succeed. Hmm, as I said, the card works absolutely ok in pnp mode in my machine, but if you use jumperless, but non-pnp mode, you maybe have to assign the resources to this isa card in bios. In pnp mode, it could be possible that it has to be configured with isapnp (but not at my machine :)). Just write me some more about your hardware settings, maybe some interrupt and i/o listings from /proc and we'll see. Regards, Stephan Hachinger - Original Message - From: Jan- Hendrik Palic [EMAIL PROTECTED] To: Stephan Hachinger [EMAIL PROTECTED] Sent: Monday, October 02, 2000 9:37 PM Subject: Re: 3c509 troubles Stephan Hachinger schrieb: Hello! I've also got a 3c509b and it works fine. I switched on PnP mode in the DOS-based 3com utilites setup program and then you don't really have to do anything complicated any more, because the bios automatically assigns irq/dma. Perhaps, there's just another pnp card using the interrupt of the 3com and this could be changed by switching the 3com to pnp. And: You've got to compile and install the kernel module for 3c509, it normally is able to autodetect irq, i/o etc.. For the irq etc... configuration, you could use isapnp, but it doesn't seem to be necessary for this card. I never used linux 3c...setup in my life. Hi Stephan... I've the card, too. My problem is, that, the module for this card is loaded succesfully and dmesg says: eth0 3c509 so, I thing, the device eth0 is enabled. But: ifconfig etho 192.168.252.10 netmask 255.255.255.0 returns, that the resources is temprarily in use! But why.. any suggestions? thnx Jan PS.: Please sent a cc to my private adress: [EMAIL PROTECTED], thnx.. -- ---Aus dem Noc--- Jan- Hendrik Palic Mail: [EMAIL PROTECTED] Url : http://www.billgotchy.de PGP : Key: 2048bit id: 9AEF805D create: 2000/03/28 Sign: Jan- Hendrik Palic [EMAIL PROTECTED] Fingerprint = C7 CE E3 16 10 B8 DE B8 8D 54 03 E6 E7 1A 16 6C
Re: printing to a windows printer
Hello!
Don't know how to create the trash bin either (because I'm also quite new to
Linux) but I suggest to you to use apsfilter instead of magicfilter. The
newest versions have a *very* good setup script or program or whatever, you
only have to insert the server and printer name and it will be ok... I only
don't know if these new versions are already packaged into .debs, I'm using
a generic tar.gz. Indeed, it seems to me like apsfilter was once installed
on your system and the config is still from that time, but the
apsfilter-scripts are missing. So, a reinstall and reconfigure of apsfilter
should help.
- Original Message -
From: David Erdman [EMAIL PROTECTED]
To: Philipp Lehman [EMAIL PROTECTED]
Cc: debian-user@lists.debian.org
Sent: Monday, October 02, 2000 4:47 PM
Subject: Re: printing to a windows printer
sorry, i am pretty new in linuxi understand the lock part (i think),
but
how would someone create a trash bin dedicated to lpd?
should I just comment the /dev/null out then?
On Mon, 02 Oct 2000, Philipp Lehman wrote:
On Sun, 1 Oct 2000, David Erdman [EMAIL PROTECTED] wrote:
i have done this in suse, and redhat but am thus far unsuccessful.
I need to print to an HP722C (win printer) that is hooked up to windows
98
on an internal lan. looking at logs
Oct 1 19:31:11 ganymede pnm2ppa[1192]: No pages printed!
Oct 1 19:31:12 ganymede lpd[1195]: cannot execv
/var/lib/apsfilter/bin/ppa720-a4-auto-mono-300
Oct 1 19:31:12 ganymede lpd[1194]: lp: job could not be printed
(cfA012ganymede)
Oct 1 19:31:24 ganymede lpd[1197]: cannot execv
/var/lib/apsfilter/bin/ppa720-a4-auto-mono-300
Oct 1 19:31:24 ganymede lpd[1196]: lp: job could not be printed
(cfA010ganymede)
Oct 1 19:52:57 ganymede lpd[1347]: cannot execv
/var/lib/apsfilter/bin/ppa720-a4-auto-mono-300
Oct 1 19:52:57 ganymede lpd[1346]: lp: job could not be printed
(cfA013ganymede)
Your input filter script seems to be causing problems, printcap
looks ok to me.
I configured with both printtool, and magicfilter.
i have also installed pn2pm (or whatever the hell it is)
my printcap is as follows
##PRINTTOOL3## SMB ppa 600x600 letter {} {HP DeskJet 720} ppa720b1 {}
lp:\
:sd=/var/spool/lpd/lp:\
:mx#0:\
:sh:\
:if=/var/spool/lpd/lp/filter:\
:af=/var/spool/lpd/lp/acct:\
:lp=/dev/null:
^
Not recommended. AFAIK lpd will *lock* /dev/null. You'd better
create a trash bin dedicated to lpd, eg /dev/lpnull or whatever.
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED]
/dev/null
Re: 3c509 troubles
Hello! I've also got a 3c509b and it works fine. I switched on PnP mode in the DOS-based 3com utilites setup program and then you don't really have to do anything complicated any more, because the bios automatically assigns irq/dma. Perhaps, there's just another pnp card using the interrupt of the 3com and this could be changed by switching the 3com to pnp. And: You've got to compile and install the kernel module for 3c509, it normally is able to autodetect irq, i/o etc.. For the irq etc... configuration, you could use isapnp, but it doesn't seem to be necessary for this card. I never used linux 3c...setup in my life. Kind Regards, Stephan Hachinger - Original Message - From: Helpdesk [EMAIL PROTECTED] To: debian user list debian-user@lists.debian.org Sent: Wednesday, September 27, 2000 9:11 PM Subject: 3c509 troubles Greetings all, I just installed the latest version of debian and am having problems with my nic. The 3c5x9setup program tells me that it can't find a nic at 0x300. This is a 3c509b-tp card that worked fine under NT. I used 3c5x9cfg to verify that the i/o address is 300h (i also tried 310h with no luck) and the irq is 10. the card passes all the diagnostic tests. I have a link light and can ping the loopback and the actual ip address of the box but can't get to anything beyond that. I installed ipv4 and also ipv6 during initial installation. I am using the version of 3c5x9setup that is listed in the debian stable packages. I have downloaded the latest source from the nasa page for 3c5x9setup but would rather not go through compiling/installing it unless its really necessary. Any ideas are appreciated. TIA ken -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Starting KDE2
Hi! Don't know if this has got anything to do with your problems, but on my machine, everything runs fine. I've got a potato distro; kde 1.93 and qt 2.2.0beta2 are compiled from source, I've compiled qt with the ./configure-switches mentioned in the kdelibs package, file compiling. The only problem was that startkde was not really started by x, although it was the first line in my window-managers list, but after I created a symlink named /usr/bin/x-window-manager pointing to /usr/local/kde/bin/startkde, everything worked. Has anyone of you experienced the last problem? It semms to me like I'm doing something wrong and my solution is a quick and dirty one!? Kind Regards, Stephan Hachinger - Original Message - From: Leen Besselink [EMAIL PROTECTED] To: Debian User list debian-user@lists.debian.org Sent: Sunday, September 17, 2000 11:52 AM Subject: Re: Starting KDE2 On Sun, 17 Sep 2000, Mike wrote: Hi everyone, Hi. I managed to get kde2 install but it wont start. I used apt-get to get it so it hould be fine, I'm using gdm so i added a menu to that which executed startkde but when it starts it sais that it failed interprocess networking and that dcopserver isnt running. Konqueror works fine if i I've been having the same problems. run it from inside gnome but i would like to have a play with kde2 so has anyone got any ideas?. No such luck yet. I've tried to compile it from source first, this did not work either. Although this is not the exact same problem, they fail at different things, so it seems to me. I think this means there are dependencies not met, but they are not listed in the .deb-files. I've not found out which ones yet. I've been very busy looking at the lists.kde.org and trying things, but it hasn't helped me yet. Thanks I wish. :) -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Adding a Drive Icon [newbie]
Hello! seems to me like he has KDE??! but I have never created any drive icon on my desktop Kind Regards, Stephan Hachinger - Original Message - From: Kent West [EMAIL PROTECTED] To: Shel Johnson [EMAIL PROTECTED] Cc: Debian debian-user@lists.debian.org Sent: Sunday, September 17, 2000 8:36 AM Subject: Re: Adding a Drive Icon [newbie] Shel Johnson wrote: I have an IDE internal ZipDrive.. When I boot my machine, I know Linux sees it as hdd.. My question is: how do I add an icon on the desktop like the floppy and cdrom??.. Thanks!! Depends on which window manager you're using. Some wm's don't have built-in support for icons, so you might not even be able to add icons with the wm you're using (at least, not without a third-party extension). -- Smaller government. Less taxation. More freedom. Monde for Congress | http://www.monde2000.org -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: 3com 3c509 and the mouse
Hello! Looks like your linux system reconfigures the ethernet card and so WIN cannot find it at the original resources, I think. An easy solution: You could switch the 3c509 to non-pnp mode using the 3com utilities, assigning free resources to it and then do a hardware recogition (don't konw exactly how it's called in English version) in WIN (and configure isapnp to not set it up under Linux (this is the default, so you maybe have to change nothing and you can also try skipping this step)) and be sure that the 3c509 module recognizes the card properly. If it doesn't work, feel free to send mails. But the problem could also be another one: Your 3c509 is in non-pnp but jumperless mode, and the Linux driver reconfigures it so that windows cannot find it... seems more reasonable than the above for me!!! A switch to pnp mode could then fix it. So, this might be confusing, but I think I would try switching it to the mode it isn't currently in and see if the problem is fixed by this action. If you switch to non-pnp, obey the above. For seeing the mouse at the console, you must install the package gpm. Under X, I think, your mouse may be configured for the wrong port and you should fix it in xf86config or it is not plugged in properly or has a broken cable (like my one). If you experience problems (I think the above might be new or difficult for you), you can also mail me under [EMAIL PROTECTED], because I look through this mailbox more thoroughly. Kind Regards, Stephan Hachinger - Original Message - From: Atila Nemet [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Sunday, September 17, 2000 12:05 PM Subject: 3com 3c509 and the mouse Hi! I have just installed debian 2.2 and I have a few problems :o) First, my mouse does not work. I can not start the X because it reports that there is no mouse. In consol mode there is also no mouse. Seems to me (a newbee) like the operating system does not even know that there is a mouse around. What is the procedure of installing a mouse? BTW. The mouse did work under debian 2.1. In consol it worked without any problem, and in X I just had to set the mouse type to auto in the XF86Config and it was ok. An the second question is, that after a debian session, Win95 almost always reports that my 3Com 509 does not work properly. Than I have to go to DOS, start the configuration program for the ehternet card, run the test, and return to Win. And only after this will the network card work again. I had the same problem with debian 2.1, and I thought that it will be gone with the 2.2 version. But it did not :o( I guess that there is some kind of a bug in the network driver? Attila -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Staroffice on Debian Potato
Hello! I only had a good experience when I installed it (ver 5.0a, 5.1, 5.2). Never had any problems. But personally, I don't like it. Kind Regards, Stephan Hachinger - Original Message - From: Andreas Palsson [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Thursday, September 14, 2000 4:41 PM Subject: Staroffice on Debian Potato Anyone have experiences on installing StarOffice on Debian Potato? Any problems at all installing or running the programs? regards... Andreas -- == andreas pålsson == [EMAIL PROTECTED] == -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Printing via win 95
Hello! The way I did it is not very good if you want only deb-packages on your system, because I used a generic tar of apsfilter (-http://www.freebsd.org/~andreas/apsfilter/index.html). But it works very well. Apsfilter has an own setup program, it's very easy to set it up, because you almost only have to type in the server and share name and choose the print filter. It also prints input files of various types if you have the right tools installed (see apsfilter site). There is also a .deb of apsfilter, but last time I tried it, it was an older ver which did not support printing via smb. Kind Regards, Stephan Hachinger - Original Message - From: Thomas Halahan [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Thursday, September 14, 2000 8:55 PM Subject: Printing via win 95 Hi Debian users, Just installed Debian over RH system. Previously I had printing set up to print to a win95 machine using the RH printtool (via samba somehow). Does anyone know of the easiest way to achieve this in debian? what printing solutions do poeple suggest - pdq? Tom -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Debian vs. Red Hat
Hello! Hmm, I actually have never upgraded using apt, but manually from 2.1 to 2.2. No problems (almost). But I can tell you debian is very well-known for that a install is only needed one time in a computer life and then you can always upgrade without problems. At least since apt came out. Kind Regards, Stephan Hachinger - Original Message - From: Ariel Manzur [EMAIL PROTECTED] To: Thomas J. Hamman [EMAIL PROTECTED]; debian-user@lists.debian.org Sent: Tuesday, September 12, 2000 9:59 PM Subject: Re: Debian vs. Red Hat At 23:42 04/09/2000 -0400, Thomas J. Hamman wrote: On Mon, Sep 04, 2000 at 09:54:15PM -0500, Wayne Sitton wrote: Here is the situation, I'm a Debian user. The company I work for, so far, will only allow Red Hat as it's Linux OS on it's servers. I need some good reasons to justify using Debian. So I'm asking you guys to help me out with your opinions, and Documentation, to prove to these computer iliterate people, that Debian is better. How about the fact that it's more stable and doesn't need to be reinstalled every time there's a new version? I had to reinstall my debian last time a new version came out.. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: cdr image format to jpg, eps : GIMP?
Hello! I've got a 1.0.2 ver of gimp and it can open: bmp,cel,fits,fli,faxg3,gbr,gif,gicon,hrz,jpeg,mpeg,pat,pcx,pix,png,pnm,psd,p ostscript,sgi,sunras,snp,tga,tiff,url,xcf,xwd,xpm(bz2,gz) If the format of your file is one of those, you can convert it into jpg (don't know if you can also convert it into eps). Kind Regards, Stephan Hachinger - Original Message - From: Antonio Rodriguez [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Tuesday, September 12, 2000 4:18 PM Subject: cdr image format to jpg, eps : GIMP? Can the GIMP be used to transform an image in cdr (I suppose it is Corel) into eps, or jpg format? If not, do you guys know of any program that will do it? Please hit reply to all, I am in the office now. Thanks, Antonio. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: ### a problem with installing Deb 2.1
Hello! If messages are scrolling down too fast, you can wait till it stops and then scroll up by pressing shift and the cursor-up key. Do you know at which controller and position your cdrom is connected? If it's primary master, it's /dev/hda, primary sl=dev/hdb, sec. ma=/dev/hdc, sec. sl=/dev/hdd. If it's connected to a promise udma controller add-on card or similar, it maybe won't work for install! It has to be connected at the mainbrd controllers (if your mainbord has some). Kind Regards, Stephan Hachinger P.S.: I've got many friends actually frustrated by the win2000 installation. So, don't give up. - Original Message - From: J [EMAIL PROTECTED] To: debian-user@lists.debian.org Cc: debian-user@lists.debian.org Sent: Saturday, August 19, 2000 2:50 PM Subject: Re: ### a problem with installing Deb 2.1 That is all very nice... thanks for the distro advertisements, but I already have a (what I hope is) an install CD, and I'd like to use the one I have if I can. When I got the book, it only came with one CD -- is that all I need? Also, when I boot from the CD, one person said that the messages would tell me which device it is on. Where do I look for that at? The messages scroll by way too damn fast to read what they say -- if I knew just where to look that would help a lot. Also, as I mentioned, when I get the list of devices to try, IVE TRIED EVERY ONE ON THE LIST WITH NO SUCCESS -- I even tried the SCSI option tho it's an Atapi IDE drive!!! If it sounds like I'm getting frustrated, I AM!!! I prefer constructive help, not advertisements, thank you. :-) - actually considering installing MSWin - a.k.a. frustrated Linux installer - a.k.a. [EMAIL PROTECTED] On Fri, 18 August 2000, Peter S Galbraith wrote: Tal Danzig wrote: You should really be using potato (Debian 2.2). It is much more up to date, (and it should auto detect your CD) Or, you may want to go for something like Libranet (debian potato based), with an easier instal. Tall Gee, Tal Danzig [EMAIL PROTECTED], thanks for the suggestion to get the libranet distribution (for about the third time today). Too bad the license on the ISO prohibits cheapbytes from reselling it. Maybe we should download it, rewrite a new ISO, and distribute it under the GPL. ;-) You can get Storm for $1.99 at cheapbytes! -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null _ Get Free E-Mail For Your Business at http://www.SmallBizMail.com Start and Grow Your Business at http://www.Entrepreneur.com -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re:
For i386, I can recommend the following fast mirror: ftp.linux.tucows.com/pub/ISO/Debian (this dir contains the images) Regards, Stephan Hachinger - Original Message - From: Jason Walcutt [EMAIL PROTECTED] To: Debian User List debian-user@lists.debian.org Sent: Saturday, August 19, 2000 9:24 PM Is there a place to download an ISO of Debian??? Thanks Jason -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: ** Emegancy Request **
Hi If there's not enough space, tar czf or tar cIf and later tar xzf / tar xIf! Bzip2/tar.gz compression really rocks (if you've got a fast cpu). Regards, Stephan Hachinger - Original Message - From: Christoph Simon [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Thursday, August 17, 2000 4:08 PM Subject: Re: ** Emegancy Request ** Hi All, Can someone please tell me the easiest and safest way to mirror a Hard Drive, keeping all permissions, owner, groups etc. intact Thanks in Advance Bill ( cd old-mount-point ; tar cf - . ) | ( cd new-mount-point ; tar xf - ) HTH Christoph Simon [EMAIL PROTECTED] -- ^X^C q quit :q ^C end x exit ZZ ^D ? help . -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: PARITY SIMMS(was: Re: Older hardware running newer software (was: Re: etc))
Hello! Why not watch out at ebay.com? Very exotic HW components are sold there!! Kind Regards, Stephan Hachinger - Original Message - From: [EMAIL PROTECTED] To: Debian User debian-user@lists.debian.org Sent: Tuesday, August 15, 2000 4:50 PM Subject: RE: Older hardware running newer software (was: Re: Installing D Good luck! I have a 486-33, as well. I had 8MB of memory when I first installed linux and X. It worked, but not real fast. An extra 4MB helped, but I would sure like more. My system uses 72 pin SIMMS, but it wants PARITY memory. I can occaisionally find non-parity memory in 72 pin SIMMS, but not parity memory. If anyone knows when I can get 1 - 4 16MB 72 pin PARITY SIMMS at a reasonable price (I'm currently unemployed) it would be greatly appreciated. On Aug 13 2000, s. keeling wrote: RAM tends to help more than upgrading to a faster processor would. Indeed. Really. The chance to avoid swaps is incredible. The only problem is that not all older boards support that much of RAM (and not all of them support even 72-way memory chips; my 486DX33 only supports RAM chips with 30-connectors -- don't know what these chips are called). []s desperately looking for upgrading the 8MB to 16MB, Roger... Marc Shapiro http://www.bigfoot.com/~m_shapiro/ -- Linux IS user-friendly. It is just picky about who its friends are. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Older hardware running newer software (was: Re: Installing Debian on 486)
Hi! I'm also a 386etc. fan and I can tell you that in fact many stores still sell 4MB simm (=30pin) modules (at least here in Germany), so that quite every old machine (if it has four or eight slots) can be upgraded to 16 or 32 MB of RAM. Sometimes you can also get these modules for a very cheap price at a second-hand market. Regards, Stephan Hachinger - Original Message - From: Rogerio Brito [EMAIL PROTECTED] To: Debian User debian-user@lists.debian.org Sent: Monday, August 14, 2000 5:28 AM Subject: Older hardware running newer software (was: Re: Installing Debian on 486) On Aug 13 2000, s. keeling wrote: RAM tends to help more than upgrading to a faster processor would. Indeed. Really. The chance to avoid swaps is incredible. The only problem is that not all older boards support that much of RAM (and not all of them support even 72-way memory chips; my 486DX33 only supports RAM chips with 30-connectors -- don't know what these chips are called). []s desperately looking for upgrading the 8MB to 16MB, Roger... -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Rogerio Brito - [EMAIL PROTECTED] - http://www.ime.usp.br/~rbrito/ Nectar homepage: http://www.linux.ime.usp.br/~rbrito/nectar/ =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: AMD Processor
Hello - Original Message - From: Christian Brandt [EMAIL PROTECTED] To: Debian User debian-user@lists.debian.org Sent: Thursday, August 10, 2000 5:40 PM Subject: Re: AMD Processor Stephan Hachinger wrote: Linux runs on all i80386 compatible microprocessors. So it also runs on a AMD K6-2. But I don't know if any Linux application or lib will use the 3DNow! extension. But this isn't very actually the Distributed.net-Client, linux-quake3 and some opengl-drivers use AMDs 3Dnow and Intels SSE. I guess there is not much use for those instructions anywhere else? Christian Brandt I guess so, too. Perhaps in a mp3 encoder (I think there's the gogo encoder - a derivative of lame optimized for 3dnow!). Regards, Stephan Hachinger
Re: Linux Newbie!! Help!!!!! 2
Hello! Thanks for your help!!! Everything went fine, except when I did make zdisk. I got an erorr message saying that my system was too big and I should do make bzImage or make modules. Does this affect anything? I still couldn't make my sound card to work. Is there anything else I should do? Yes. Make bzdisk/bzImage/bzlilo instead, because this produces a better compressed and therefore smaller kernel. If the kernel is too large, it cannot be installed and so your sound card cannot work. Or put some drivers into modules. You should enable the kernel module autoloader in the make menuconfig-config menu :-), so the kernel loads the drivers you need automatically. But if you're a newbie, I'd recommend you to compile support for all devices directly into the kernel. Two reasons come to my mind which could be the cause for the not-function of your soundcard: - You have configured the IRQs/DMAs/IO ports in a wrong way (see soundcard manual) - But now, as zimage did not work, I think you are not really booting your new kernel, but the old one instead. I think it's not good to make bzimage or zimage for a newbie, because it requires a manual kernel install to work. There are two other choices which are easier, they compile the kernel AND install it: I agree with Kent that creating a bootdisk at first and testing the kernel is safer. You can do this by make bzdisk (or make zdisk if the kernel is very small, but probably it does not work.). When you see that your machine is booting up ok from the disk (be sure that you have configured the bootup sequence a: c: in your BIOS!), then I'd recommend make bzlilo, so that your kernel is automatically configured for booting from the HDD. Note that you always need make dep before the bz... and make modules, make modules_install after it. Kind Regards, Stephan Hachinger
Re: noise from monitor, HELP!
Oh, I forgot to post this... only sent it to John. - Original Message - From: Stephan Hachinger [EMAIL PROTECTED] To: John Pearson [EMAIL PROTECTED] Sent: Wednesday, August 02, 2000 12:49 PM Subject: Re: noise from monitor, HELP! Hello! Now all of a sudden I get a VERY high pitched noise from it when in X. It does not do this on the console! It has become more and more frequent and is starting to drive me nuts (well more then usual :) I know it's the monitor because I can turn it off while it's doing it and the noise stops. Does anyone know what the problem might be? If it is a regular CRT-style monitor, there are wire coils wrapped around the CRT to deflect the electron beam to provide horizontal vertical deflection; these are probably glued in place (or at least, in bundles) using epoxy resin or something similar. Probably, the epoxy has cracked or come loose from whatever it's anchored to at some point and what you can hear is some or all of the windings on the horizontal deflection coil rattling back and forth in time to the horizontal scan, in accordance with Newton's laws (For every action there is an equal and opposite reaction). Just maybe, it's some other part of your monitor's yoke doing the same thing. It's irritating as hell if you can hear it, but it shouldn't affect the monitor's performance or reliability. John is right! It's probably one of the wire coils, as I just read on a German homepage. Andrew wrote: I usually just hit mine :) He's wrong, I think. Hitting electronic components indeed stops many problems, but in this case, the deflection coils get even more loose and so it's just a temporary solution. Possible solutions: - Pay someone to fix it. If you take it in for a service, be *very*clear* about the problem or it probably won't get fixed (chances are, most of their techs won't be able to hear it). This is the only one I suggest! Or perhaps, at a lower or higher vertical frequency, the noise does not appear any more. You can also try to fix the coils yourself. But be aware of HIGH VOLTAGES appearing in monitors even if they are plugged off. There are capacitors installed. So, if you wanna fix them, put on rubber gloves. And start the repair after you have plugged it off for some hours. Don't touch any metal parts if possible, because there are maybe still parts carrying high voltage. To repair it, simply open the case, locate the coils and fix them using epoxy 2-component glue. If the problem does not disappear after this action, maybe it wasn't caused by the deflection coils but by the line transformer (this is how Germans call it, I don't know if this is good English). I've read that this transformer can be located by backtracing the thick anode cable starting at the picure tube. The site said you can fix the parts of this transformer using plastic spray. Does anyone know if epoxy also works? I think so. *IMPROTANT* If you open the monitor case, the granted guarantee period is definitely aborted and over. And I have once opened a monitor using thick rubber gloves, but never done the above to any. So I do not know what the result will be. If you don't know about electronics, you should better have it fixed by anyone else instead of lying kind of ESD-demaged besides your monitor and not moving any more. But it is very likely that fixing the deflection coils will fix the problem for the next years. About the plastic spray: I do not know what it is and if it works and what happens if you don't spray it only on your trafo but also on the rest of the electrics by accident. I've only read about it. Regards, Stephan Hachinger
Re:
Hello! These are the Debian JDK packages (don't know which package the compiler is in). Hope this helps. BTW, isn't a JVM included in Netscape? unstable 100% http://www.debian.org/Packages/unstable/devel/jdk1.1-native-dev.html jdk1.1-native-dev 1.1.8v1-3 (2247.9k) JDK 1.1.x - native threads extensions frozen 100% http://www.debian.org/Packages/frozen/devel/jdk1.1-native-dev.html jdk1.1-native-dev 1.1.8v1-3 (2247.9k) JDK 1.1.x - native threads extensions unstable 88% http://www.debian.org/Packages/unstable/devel/jdk1.1-native.html jdk1.1-native 1.1.8v1-3 (971.8k) JDK 1.1.x Runtime - native threads extensions frozen 88% http://www.debian.org/Packages/frozen/devel/jdk1.1-native.html jdk1.1-native 1.1.8v1-3 (971.8k) JDK 1.1.x Runtime - native threads extensions stable 30% http://www.debian.org/Packages/stable/devel/jdk1.1-dev.html jdk1.1-dev 1.1.7v1a-2 (4651.1k) JDK 1.1.x (Java Development Kit) unstable 30% http://www.debian.org/Packages/unstable/devel/jdk1.1-dev.html jdk1.1-dev 1.1.8v1-3 (3888.3k) JDK 1.1.x (Java Development Kit) frozen 30% http://www.debian.org/Packages/frozen/devel/jdk1.1-dev.html jdk1.1-dev 1.1.8v1-3 (3888.3k) JDK 1.1.x (Java Development Kit) stable 17% http://www.debian.org/Packages/stable/devel/jdk1.1.html jdk1.1 1.1.7v1a-2 (5222.5k) JDK 1.1.x (Java Development Kit) - Runtime only unstable 17% http://www.debian.org/Packages/unstable/devel/jdk1.1.html jdk1.1 1.1.8v1-3 (4961.1k) JDK 1.1.x (Java Development Kit) - Runtime only frozen 17% http://www.debian.org/Packages/frozen/devel/jdk1.1.html jdk1.1 1.1.8v1-3 (4961.1k) JDK 1.1.x (Java Development Kit) - Runtime only Kind Regards, Stephan Hachinger - Original Message - From: Goeman Stefan [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Tuesday, August 01, 2000 3:22 PM Hello Everybody, Does anybody know where I can find a good Java compiler and Java Virtual Machine for Debian/Linux? Greetings, Stefan. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
