Re: Samba setup or alternative?
Eduardo M KALINOWSKI wrote: > On 11-03-2017 09:35, Johann Spies wrote: >> Is there not a better way to mount spyker's home directory on my laptop? >> > > If you can access it via ssh, you can try sshfs. > There's also NFS, which I find to be a little more tolerant of me :). -- |_|O|_| Registered Linux user #585947 |_|_|O| Github: https://github.com/dpurgert |O|O|O| PGP: 05CA 9A50 3F2E 1335 4DC5 4AEE 8E11 DDF3 1279 A281
Re: Samba setup or alternative?
On 11 Mar 2017 2:45 PM, "Eduardo M KALINOWSKI"wrote: On 11-03-2017 09:35, Johann Spies wrote: > Is there not a better way to mount spyker's home directory on my laptop? > If you can access it via ssh, you can try sshfs. Thanks. I forgot about that. I did use it at work about 8 years ago. Regards Johann
Re: Samba setup or alternative?
On 11-03-2017 09:35, Johann Spies wrote: > Is there not a better way to mount spyker's home directory on my laptop? > If you can access it via ssh, you can try sshfs. -- We just joined the civil hair patrol! Eduardo M KALINOWSKI edua...@kalinowski.com.br
Samba setup or alternative?
As I do not use Windows, I was never fond of samba. Now I want to have access from my laptop to my home directory on my Desktop computer(home network server) which both run Debian Sid other than just ssh. I want to be able to mount that directory on my laptop when needed. I have worked through a number of Debian-related howto's on how to set up a Samba server. BTW most of them seems to me a bit outdated. Anyhow, this is what I get: $ smbclient -L //192.168.0.1/home/js/ -U js Enter js's password: Domain=[SPYKER] OS=[Windows 6.1] Server=[Samba 4.5.4-Debian] Sharename Type Comment - --- print$ Disk Printer Drivers IPC$IPC IPC Service (Samba 4.5.4-Debian) js Disk Home Directories PDF Printer PDF Samsung-ML-191x-252x-Series Printer Samsung ML-191x 252x Series Domain=[SPYKER] OS=[Windows 6.1] Server=[Samba 4.5.4-Debian] Server Comment ---- SPYKER Samba 4.5.4-Debian WorkgroupMaster ---- SPYKER SPYKER 14:23:25 js@spyker:/etc/samba$ smbclient //192.168.0.1/home/js/ -U js Enter js's password: Domain=[SPYKER] OS=[Windows 6.1] Server=[Samba 4.5.4-Debian] tree connect failed: NT_STATUS_BAD_NETWORK_NAME >From what I have found searching on Duckduckgo.com the failure message indicates a permission problem. Apparently the permissions should be 0755. I am not prepared to do that to my home directory on the Desktop Computer. Now my questions: Why on earth is the OS indicated as Windows 6.1? Is it possible to share my home directory on the Desktop (spyker) without changing it's permissions? Is there not a better way to mount spyker's home directory on my laptop? My configuration in the 'homes' section of smb.conf [homes] comment = Home Directories browseable = no read only = no create mask = 0700 directory mask = 0700 Regards Johann -- Because experiencing your loyal love is better than life itself, my lips will praise you. (Psalm 63:3)
Re: Question about samba setup in Sarge
On Monday 26 September 2005 03:10 pm, Paul E Condon wrote: I am attempting to create a samba server on a Sarge box using pure Debian. I am looking at the /etc/samba/smb.conf I cannot find a file, ENCRYPTION.txt, on my computer or as part of any of the packages that I installed. Where can I obtain a copy of this file? Hi, I found this: http://www.samba-tng.org/docs/tng/textdocs/ENCRYPTION.txt It's dated August 2000. I found some older versions, but nothing newer. This may be the most recent revision. BTW, I found this through Google's advanced search, looking for URLs that contained samba and ENCRYPTION.txt. Also, if you speak Japanese, 'samba-doc-ja' contains a Japanese translation :) -- Peace, Aaron Maxwell - http://redsymbol.net Skills for higher math - http://InnerAlgebra.com COMING SOON: Retail Worker's Survival Guide - http://rwsg.us -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
RE: Question about samba setup in Sarge
I cannot find a file, ENCRYPTION.txt, on my computer or as part of any of the packages that I installed. Where can I obtain a copy of this file? Have you tried to ask google? Florian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Question about samba setup in Sarge
Paul E Condon said: I am attempting to create a samba server on a Sarge box using pure Debian. I am looking at the /etc/samba/smb.conf that was set up by the samba package and have a question about a comment in it, namely quote # You may wish to use password encryption. Please read ENCRYPTION.txt, # Win95.txt and WinNT.txt in the Samba documentation. Do not enable this /quote I cannot find a file, ENCRYPTION.txt, on my computer or as part of any of the packages that I installed. Where can I obtain a copy of this file? Did you try looking in /usr/doc/samba? -- - Josh www.omg-stfu.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Question about samba setup in Sarge
On Tue, Sep 27, 2005 at 10:54:27AM -0500, Josh Battles wrote: Paul E Condon said: I am attempting to create a samba server on a Sarge box using pure Debian. I am looking at the /etc/samba/smb.conf that was set up by the samba package and have a question about a comment in it, namely quote # You may wish to use password encryption. Please read ENCRYPTION.txt, # Win95.txt and WinNT.txt in the Samba documentation. Do not enable this /quote I cannot find a file, ENCRYPTION.txt, on my computer or as part of any of the packages that I installed. Where can I obtain a copy of this file? Did you try looking in /usr/doc/samba? I used locate to search for a file whose name contained ENCRY. I found nothing. And I do have samba-doc installed. -- Paul E Condon [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Question about samba setup in Sarge
On Tue, Sep 27, 2005 at 07:14:38AM +, Florian Dorpmueller wrote: I cannot find a file, ENCRYPTION.txt, on my computer or as part of any of the packages that I installed. Where can I obtain a copy of this file? Have you tried to ask google? Yes, and I found only advice emails that tell people to look at it, not a link to the actual file. -- Paul E Condon [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Question about samba setup in Sarge
I am attempting to create a samba server on a Sarge box using pure Debian. I am looking at the /etc/samba/smb.conf that was set up by the samba package and have a question about a comment in it, namely quote # You may wish to use password encryption. Please read ENCRYPTION.txt, # Win95.txt and WinNT.txt in the Samba documentation. Do not enable this /quote I cannot find a file, ENCRYPTION.txt, on my computer or as part of any of the packages that I installed. Where can I obtain a copy of this file? TIA -- Paul E Condon [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: samba setup tips?
On Wed, 2005-07-13 at 21:54 -0500, Josh Battles wrote: David Clymer said: Please remember to reply to the list, not to the individual. I will reply on-list so that everyone can (hopefully) benefit from our exchange. Sorry about that. On Tue, 2005-07-12 at 08:42 -0500, Josh Battles wrote: David Clymer said: When you say that you can't log on, do you mean that your username/password is rejected, or that you just dont see any shared folders? What error messages are you getting on the clients when they attempt to log on? My username and password is rejected. My Debian desktop picked up almost instantly a folder called shared on beer (beer is the server hostname) and popped it on the desktop when I booted. I'm able to see that same folder in Win2k but not access it from either OS. For each computer (NT,2k,XP) that logs on to your domain, you will need to have set up a trust account: $ adduser --home /dev/null --shell /bin/false --ingroup machine --force-badname --no-create-home --disabled-login --gecos Machine Trust Account MYCOMPUTER$ $ smbpasswd -m -a MYCOMPUTER So, if I'm going to add a user called cletusjones to my box called beer it would go something like this: adduser cletusjones --home /dev/null --shell /bin/false --ingroup machine --force-badname --no-create-home --disables-login --gecos Machine Trust Account BEER no. you add the user account and machine accounts separately, and the unix computer account must end with a dollar sign. As per my examples. and: smbpasswd ** -m -a BEER correct? no. in unix, most commands have a manual page explaining their options, syntax, etc. please read the man page to find out what is wrong with your usage. type: $ man smbpasswd for each user that logs on or accesses shares, you need to have a unix and samba account: $ adduser --shell /bin/false --disabled-login userbob $ gpasswd -a userbob samba $ smbpasswd -a userbob For these statements, I'm replacing userbob with my usernames and that should just be it, yes? yes. You might find this helpful: http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/ -davidc -- gpg-key: http://www.zettazebra.com/files/key.gpg signature.asc Description: This is a digitally signed message part
Re: samba setup tips?
David Clymer said: Please remember to reply to the list, not to the individual. I will reply on-list so that everyone can (hopefully) benefit from our exchange. Sorry about that. On Tue, 2005-07-12 at 08:42 -0500, Josh Battles wrote: David Clymer said: When you say that you can't log on, do you mean that your username/password is rejected, or that you just dont see any shared folders? What error messages are you getting on the clients when they attempt to log on? My username and password is rejected. My Debian desktop picked up almost instantly a folder called shared on beer (beer is the server hostname) and popped it on the desktop when I booted. I'm able to see that same folder in Win2k but not access it from either OS. For each computer (NT,2k,XP) that logs on to your domain, you will need to have set up a trust account: $ adduser --home /dev/null --shell /bin/false --ingroup machine --force-badname --no-create-home --disabled-login --gecos Machine Trust Account MYCOMPUTER$ $ smbpasswd -m -a MYCOMPUTER So, if I'm going to add a user called cletusjones to my box called beer it would go something like this: adduser cletusjones --home /dev/null --shell /bin/false --ingroup machine --force-badname --no-create-home --disables-login --gecos Machine Trust Account BEER and: smbpasswd ** -m -a BEER correct? for each user that logs on or accesses shares, you need to have a unix and samba account: $ adduser --shell /bin/false --disabled-login userbob $ gpasswd -a userbob samba $ smbpasswd -a userbob For these statements, I'm replacing userbob with my usernames and that should just be it, yes? -- - Josh www.omg-stfu.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: samba setup tips?
Please remember to reply to the list, not to the individual. I will reply on-list so that everyone can (hopefully) benefit from our exchange. On Tue, 2005-07-12 at 08:42 -0500, Josh Battles wrote: David Clymer said: When you say that you can't log on, do you mean that your username/password is rejected, or that you just dont see any shared folders? What error messages are you getting on the clients when they attempt to log on? My username and password is rejected. My Debian desktop picked up almost instantly a folder called shared on beer (beer is the server hostname) and popped it on the desktop when I booted. I'm able to see that same folder in Win2k but not access it from either OS. For each computer (NT,2k,XP) that logs on to your domain, you will need to have set up a trust account: $ adduser --home /dev/null --shell /bin/false --ingroup machine --force-badname --no-create-home --disabled-login --gecos Machine Trust Account MYCOMPUTER$ $ smbpasswd -m -a MYCOMPUTER for each user that logs on or accesses shares, you need to have a unix and samba account: $ adduser --shell /bin/false --disabled-login userbob $ gpasswd -a userbob samba $ smbpasswd -a userbob The only password that matters to the user is the samba password. The unix account provides a way to map users to unix permissions. In order for a user to access a samba share, they must have appropriate unix permissions on the folder, and also meet any additional requirements set up in the share's configuration in smb.conf What version of windows are you refering to? Win XP, 98? Win2k and WinXP This option conflicts with the encrypt passwords = true that you have set above. You may as well comment this out, since pam is ignored when passwords are encrypted (see man smb.conf). I must have missed that, I read that man page several times. I'll comment it out. There's a lot to read. It's easy to miss stuff. Your samba config does not have this directory shared. Using swat, I was able to create this share but am still unable to log into it. I'm new to this, I've only used linux as a desktop before, but since my old NT4 server died I thought I'd give it a try and see what it's got to offer there as well. I'm fairly familiar with configuration for desktop stuff but as all this server stuff is new to me I'm lost. Thanks in advance. Was your NT server acting as a PDC? In other words, are you hoping to have samba work as a domain controller or just a win 95/98 type file server? Yes, the NT server was actind as a domain controller. I was hoping to setup this server as the same but I've not gotten that far yet. Should I be setting it up as a domain controller before I setup samba? You probably want to set it all up at once. Here are the main portions of my config to get you started. #=== Global Settings === [global] # Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d # Change this for the workgroup/NT-domain name your Samba server will part of workgroup = MAINST # server string is the equivalent of the NT Description field server string = File server netbios name = VADER # allow connections from all localnets except mail server and firewall hosts allow = 192.168. 10.0.1.2 EXCEPT 192.168.10.2 # If you want to automatically load your printer list rather # than setting them up individually then you'll need this load printers = yes # You may wish to override the location of the printcap file ; printcap name = /etc/printcap # 'printing = cups' works nicely printing = bsd print command = lpr -P %p -h %s ; rm %s lpq command = lpq -P %p lprm command = lprm -P %p %j # lppause command = # lpresume command = # ; guest account = nobody ; invalid users = root # user maps username map = /etc/samba/usermap.conf # This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 2000 # Set level of logging log level = 2 # If you want Samba to log though syslog only then set the following # parameter to 'yes'. Please note that logging through syslog in # Samba is still experimental. ; syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smb,nmb} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0 # security = user is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # security_level.txt for details. security = user # You may wish to use password encryption. Please read ENCRYPTION.txt, # Win95.txt and WinNT.txt in the Samba documentation. Do not enable this # option unless you have read those
Re: samba setup tips?
On Sat, 2005-07-09 at 15:12 -0500, Josh Battles wrote: I'm having a few problems setting up samba on my server and I was hoping that the list would be able to shed some light on my issue for me and point me in the right direction. I've installed all the required pieces of samba and started the daemons and set each user's samba password by using the command smbpasswd -a username. I can see the samba share from every other pc on my network but am unable to log into it from either linux or windows. What am I missing? When you say that you can't log on, do you mean that your username/password is rejected, or that you just dont see any shared folders? What error messages are you getting on the clients when they attempt to log on? What version of windows are you refering to? Win XP, 98? Here's my samba.conf file: ### Authentication ### # security = user is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc # package for details. security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true # If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam guest obey pam restrictions = yes This option conflicts with the encrypt passwords = true that you have set above. You may as well comment this out, since pam is ignored when passwords are encrypted (see man smb.conf). Oddly enough, the directory /shared is what I'm trying to share via samba. Your samba config does not have this directory shared. I'm new to this, I've only used linux as a desktop before, but since my old NT4 server died I thought I'd give it a try and see what it's got to offer there as well. I'm fairly familiar with configuration for desktop stuff but as all this server stuff is new to me I'm lost. Thanks in advance. Was your NT server acting as a PDC? In other words, are you hoping to have samba work as a domain controller or just a win 95/98 type file server? -davidc -- gpg-key: http://www.zettazebra.com/files/key.gpg signature.asc Description: This is a digitally signed message part
samba setup tips?
I'm having a few problems setting up samba on my server and I was hoping that the list would be able to shed some light on my issue for me and point me in the right direction. I've installed all the required pieces of samba and started the daemons and set each user's samba password by using the command smbpasswd -a username. I can see the samba share from every other pc on my network but am unable to log into it from either linux or windows. What am I missing? Here's my samba.conf file: #=== Global Settings === [global] ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of workgroup = bacon # server string is the equivalent of the NT Description field server string = %h server (Samba %v) # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server ; wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS. dns proxy = no # What naming service and in what order should we use to resolve host names # to IP addresses ; name resolve order = lmhosts host wins bcast Debugging/Accounting # This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 1000 # If you want Samba to only log through syslog then set the following # parameter to 'yes'. ; syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0 # Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d ### Authentication ### # security = user is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc # package for details. security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true # If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam guest obey pam restrictions = yes ; guest account = nobody invalid users = root # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. ; unix password sync = no # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Augustin Luton [EMAIL PROTECTED] for # sending the correct chat script for the passwd program in Debian Potato). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. ; pam password change = no ## Printing ## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups # When using [print$], root is implicitly a 'printer admin', but you can # also give this right to other users to add drivers and set printer # properties ; printer admin = @ntadmin File sharing # Name mangling options ; preserve case = yes ; short preserve case = yes Misc # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c
Re: samba setup tips?
Josh Battles wrote: obey pam restrictions = yes Is PAM correctly configured? Have you tried it without PAM? I don't use it myself, so I won't be of much help if you need that option. As for setup tips, from the looks of your smb.conf it seems you are not using SWAT, and have started from a very old default setup. I think SWAT is nearly indispensible for beginners, and it may highlight some config details you are overlooking. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: samba setup tips?
On Saturday 09 July 2005 12:12 pm, Josh Battles wrote: I'm having a few problems setting up samba on my server and I was hoping that the list would be able to shed some light on my issue for me and point me in the right direction. I've installed all the required pieces of samba and started the daemons and set each user's samba password by using the command smbpasswd -a username. I can see the samba share from every other pc on my network but am unable to log into it from either linux or windows. What am I missing? Here's my samba.conf file: #=== Global Settings === [global] ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of workgroup = bacon # server string is the equivalent of the NT Description field server string = %h server (Samba %v) # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server ; wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS. dns proxy = no # What naming service and in what order should we use to resolve host names # to IP addresses ; name resolve order = lmhosts host wins bcast Debugging/Accounting # This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 1000 # If you want Samba to only log through syslog then set the following # parameter to 'yes'. ; syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0 # Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d ### Authentication ### # security = user is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc # package for details. security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true # If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam guest obey pam restrictions = yes ; guest account = nobody invalid users = root # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. ; unix password sync = no # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Augustin Luton [EMAIL PROTECTED] for # sending the correct chat script for the passwd program in Debian Potato). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. ; pam password change = no ## Printing ## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this ; load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups # When using [print$], root is implicitly a 'printer admin', but you can # also give this right to other users to add drivers and set printer # properties ; printer admin = @ntadmin File sharing # Name mangling options ; preserve case = yes ; short preserve case = yes Misc # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba
SAMBA setup from newbie
Hi! I have just install Samba by running: apt-get -t testing install samba then I would like to try listing the shares available on my server by running: smbclient -L knight(myhostname) but the computer output: bash: smbclient: command not found after I run testparm it outputs: Load smb config files from /etc/samba/smb.conf Processing section [homes] Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions # Global parameters [global] workgroup = GODDESS OFFICE server string = %h server (Samba %v) obey pam restrictions = Yes passdb backend = tdbsam, guest passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword: %n\n . syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No wins support = Yes panic action = /usr/share/samba/panic-action %d invalid users = root [homes] comment = Home Directories create mask = 0700 directory mask = 0700 browseable = No I am also using Windows XP. I can see my linux computer in XP, but it never activate when I typed in login and password. I just want to work the files between XP and linux, and store the files in linux. Best regards, Terence ___ Do You Yahoo!? Get your free @yahoo.com.hk address at http://mail.english.yahoo.com.hk -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: SAMBA setup from newbie
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sat, Aug 09, 2003 at 07:25:26PM +0800, Terence Ng wrote: smbclient -L knight(myhostname) but the computer output: bash: smbclient: command not found apt-get install smbclient - -- .''`. Paul Johnson [EMAIL PROTECTED] : :' :proud Debian admin and user `. `'` `- Debian - when you have better things to do than fix a system -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/NN/isClmdIs2Ki8RAoV4AJ95X1Vl/zx3Rgk3vznXLk8eL7YazwCeMhCm iwnF+3exG1v44h7/kuS1yqA= =vXpQ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Samba setup question: security setting
Quoting Bill Moseley [EMAIL PROTECTED]: I suppose this has nothing to do with Debain, but what does it mean to be a Primary Domain Controler? And does that apply to Win98 and WinME machines or only W2K/XP/NT machines? In a networked environment using WinNT, 2K, XP Pro (and perhaps 98 and ME, and 95 with some ugliness), the Primary Domain Controller (and Backup Domain Controller(s) - PDC BDC(s) respectively) serve as a central authentication server. For example, in a college environment, you might have 1000 faculty/staff and 6000 students, many of them going from one computer lab to another. The lab machines are configured not to authenticate users themselves, but to look to the domain controllers to determine if Joe Student is a valid user and has a valid password and is logging in at a valid time from a valid place and can use this printer but not that one and can mount this network drive share but not that one. Samba can function as a PDC, so that you don't have an unreliable Windows box in the server room performing this essential task. As indicated above, I'm not sure how well the Win9x/ME series plays in the mix, and I believe the WinXP Home (not Pro) also has some issues playing in such an environment. Kent -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Samba setup question: security setting
On Tue 31 Dec 2002 07:33:26 +(-0800), Bill Moseley wrote: Also, when I followed the instructions for setting up CUPS for printing trying to print from Windows to linux asked for a password. Password for what user?? This is what I finally setup for my printer to allow access: [printers] comment = All Printers browseable = no path = /tmp printable = yes # change to public public = yes guest ok = yes writable = no create mode = 0700 Bill, I think you also need guest only = Yes to suppress the password. This works for me from Windows 95a, and with share level security. Here's my printers section: [printers] comment = All Printers path = /tmp create mask = 0700 guest only = Yes guest ok = Yes printable = Yes printing = cups print command = lpr -oraw -r -P'%p' %s browseable = No -- Cheers, Clive -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Samba setup question: security setting
Lourens replying to Bill Moseley [EMAIL PROTECTED] wrote: [snipped] I suppose this has nothing to do with Debain, but what does it mean to be a Primary Domain Controler? And does that apply to Win98 and WinME machines or only W2K/XP/NT machines? Some may argue that for a small home LAN it might not be necessary to do the PDC thing. It takes little extra time to setup and there are advantages using the Domain model - wrt Doze, i.e. Unfortunately, Samba documentation seems to lag somewhat, the principles are the however the same: IBM TUTORIAL: USING SAMBA AS A PRIMARY DOMAIN CONTROLLER http://www-1.ibm.com/servers/esdd/tutorials/samba.html?t=gr,l=335,p=SambaTutorial CROSSNODES: BUILD A PRIMARY DOMAIN CONTROLLER WITH SAMBA, PART 2 Part 1 is also there grin http://networking.earthweb.com/netos/article/0,,12083_1151091,00.html There's a good Samba resource from the University of Oregon called The Unofficial Samba HOWTO (http://hr.uoregon.edu/davidrl/samba.html) (This is a great doc) Using Samba as PDC Nice article in the Feb 2002 edition of Linux Magazine, http://www.linux-mag.com Should you wish to use a GUI tool to configure Samba, you are IMHO better off with Webmin. The last time I looked, SWAT removed all of the usefull comments from smb.conf HTH *** Treat yourself with Debian Linux and Open Source Software http://www.debian.org/social_contract *** Lourens Steenkamp R.S.A. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Samba setup question: security setting
I've read many Samba HOWTOs but I always have trouble -- and never really sure if I have it right. On my home LAN I have two Windows machines (Win98 and WinME). Neither are setup with passwords -- well nothing that I would call a password. I think one machine gives a login prompt but I just hit enter. Samba comes configured with user level security which I always have a hard time getting setup. I suppose it's my lack of understanding of Windows networking. The other day I setup Samba for a friend who's running WinXP, and I used user level access and (IIRC) used smbpasswd to add a password for his account. I think I had to setup an account on linux that matched the username he had on WinXP, too. Frankly, I just messed with it until it worked. Anyway, my question is about my home LAN. Since the Windows machines do not match users on the linux box I'm using share level access. But I think that's probably insecure. For one thing, I had a share on directory on the linux machine and when I connected from Windows it asked for the password (for that user's directory). I entered the password, asked Windows NOT to keep the password, yet now I can always connect to that share without a password![1] Is it possible (and is it recommended) to move to security = user on my home LAN when the Windows machines don't really have a password? I guess what I'm asking is how best to setup Samba and the Windows machines I'm running. And, more importantly, why I need to setup it up a given way. Also, when I followed the instructions for setting up CUPS for printing trying to print from Windows to linux asked for a password. Password for what user?? This is what I finally setup for my printer to allow access: [printers] comment = All Printers browseable = no path = /tmp printable = yes # change to public public = yes guest ok = yes writable = no create mode = 0700 [1] And why that stinks is that once the Windows machine got a virus and was then able to write junk all over that share on the Linux machine. -- Bill Moseley [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Samba setup question: security setting
On Tue, 31 Dec 2002 07:33:26 -0800 (PST) Bill Moseley [EMAIL PROTECTED] wrote: I've read many Samba HOWTOs but I always have trouble -- and never really sure if I have it right. On my home LAN I have two Windows machines (Win98 and WinME). Neither are setup with passwords -- well nothing that I would call a password. I think one machine gives a login prompt but I just hit enter. Samba comes configured with user level security which I always have a hard time getting setup. I suppose it's my lack of understanding of Windows networking. The other day I setup Samba for a friend who's running WinXP, and I used user level access and (IIRC) used smbpasswd to add a password for his account. I think I had to setup an account on linux that matched the username he had on WinXP, too. Frankly, I just messed with it until it worked. Anyway, my question is about my home LAN. Since the Windows machines do not match users on the linux box I'm using share level access. But I think that's probably insecure. For one thing, I had a share on directory on the linux machine and when I connected from Windows it asked for the password (for that user's directory). I entered the password, asked Windows NOT to keep the password, yet now I can always connect to that share without a password![1] Is it possible (and is it recommended) to move to security = user on my home LAN when the Windows machines don't really have a password? I guess what I'm asking is how best to setup Samba and the Windows machines I'm running. And, more importantly, why I need to setup it up a given way. Also, when I followed the instructions for setting up CUPS for printing trying to print from Windows to linux asked for a password. Password for what user?? This is what I finally setup for my printer to allow access: [printers] comment = All Printers browseable = no path = /tmp printable = yes # change to public public = yes guest ok = yes writable = no create mode = 0700 [1] And why that stinks is that once the Windows machine got a virus and was then able to write junk all over that share on the Linux machine. -- Bill Moseley [EMAIL PROTECTED] Hi, Although I can't help you with internal filtering (I guess this is possible) I would suggest to limit the allowed ip-range to that of your own network (if you haven't already done this off course). No external scans will expose your shares then, and because they don't know they're there, nobody will try to connect to them (since they don't know their netbios name anyhows). there is a general option to set this, you can probably find it by just looking through an example config file (eg the standard smb one?). mvg, Wim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Samba setup question: security setting
Quoting Bill Moseley [EMAIL PROTECTED]: Is it possible (and is it recommended) to move to security = user on my home LAN when the Windows machines don't really have a password? I guess what I'm asking is how best to setup Samba and the Windows machines I'm running. And, more importantly, why I need to setup it up a given way. Hi Bill, 99% of my samba networks use security = user. My samba server acts as a PDC and I have all workstations login to the domain. I like this as you can setup login scripts to execute apon login. Check out: http://ca.samba.org/samba/docs/man/smb.conf.5.html Here's a small example that should work: [global] printing = lprng security = user workgroup = foobar encrypt passwords = true domain master = yes netbios name = Samba domain logons = yes logon script = login.bat logon drive = h:#(This line can pounded out if no XP machines) local master = yes preferred master = yes preserve case = yes passwd program = /usr/bin/passwd %u unix password sync = true passwd chat = *new*password* %n\n *new*password* %n\n *updated* min password length = 4 [eps440] printable = yes public = yes path = /tmp [netlogon] path = /usr/local/share/netlogon create mode = 0755 writeable = yes [homes] browseable = no read only = no create mode = 0755 Note: for XP on domain logins you'll need to add the XP machines to smbpasswd. If you had an XP machine named xpname, you'll need to run: # useradd XPNAME$ # smbpasswd -am XPNAME$ Then, you can join the xp machine to the domain. You may need a root smpasswd entry for this. There's also a XP registry hack out on the web that you may need. You could probably hunt it down at google. Also, when I followed the instructions for setting up CUPS for printing trying to print from Windows to linux asked for a password. Password for what user?? LPrng has always worked fine for me so far and so I don't know much about cups. but I think this is a samba thing and nothing to do with cups. Hope this helps, Cheers, Mike - This mail sent through IMP: http://horde.org/imp/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Samba setup question: security setting
On Tue, 31 Dec 2002, Mike Egglestone wrote: Quoting Bill Moseley [EMAIL PROTECTED]: Is it possible (and is it recommended) to move to security = user on my home LAN when the Windows machines don't really have a password? I guess what I'm asking is how best to setup Samba and the Windows machines I'm running. And, more importantly, why I need to setup it up a given way. Hi Bill, 99% of my samba networks use security = user. My samba server acts as a PDC and I have all workstations login to the domain. I like this as you can setup login scripts to execute apon login. I suppose this has nothing to do with Debain, but what does it mean to be a Primary Domain Controler? And does that apply to Win98 and WinME machines or only W2K/XP/NT machines? -- Bill Moseley [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Samba setup question: security setting
Quoting Bill Moseley [EMAIL PROTECTED]: I suppose this has nothing to do with Debain, but what does it mean to be a Primary Domain Controler? And does that apply to Win98 and WinME machines or only W2K/XP/NT machines? This will help setup control for your network. This applies to all Billy's OS's since win95. You may want to check out docs on samba or NT servers. I find you can have a little more security and control with a samba server as a PDC, but perhaps your home network just needs a plain file server. Cheers, Mike - This mail sent through IMP: http://horde.org/imp/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
samba setup gaflooey
now that apple-communications are all lovely (thanks to ethan and his quickie fix) i though samba would be a breeze. silly me. after 24 hours, my uptime was OVER FIVE, and tcpd was consuming 98% of cpu time (according to 'top').. 9869 ?R 0:01 \_ tcpd /usr/sbin/nmbd -a 8493 ?R539:49 \_ tcpd /usr/sbin/smbd 9205 ?R119:45 \_ tcpd /usr/sbin/smbd 9276 ?R106:22 \_ tcpd /usr/sbin/smbd aside from not knowing where to go to tell windows 98 that there's a mountable volume Out There on the network neighborhood, how can i reinstall samba on my debian machine and tame it so it leaves me some cpu cycles to work with? i know there are documents -- like the library of congress contains books. please point, i'll go. -- DEBIAN NEWBIE TIP #29 from Will Trillich [EMAIL PROTECTED] : Console GIBBERISH? Suddenly you're seeing Russian or Korean or box-like text no your console or xterm (or rxvt) -- probably after viewing a binary file, right? :) Enter reset at the command line, or try embedding a control-O (letter oh) into your command-line prompt string: export PS1='[EMAIL PROTECTED]: \w$ ' Also see http://newbieDoc.sourceForge.net/ ...
Re: Samba setup
Quoth C. Falconer, I have a dozen win95b machines using an old pentium as a samba server - rocks seriously hard considering the budget was $100 NZ, and that was spend on the O'Reilly book Samba. I thoroughly recommend it to you. FWIW, The O'Reilly Samba book is available in html form free on the O'Reilly web site as well as in the tarball of the latest samba version (though I don't know if it's in the deb). Still, handy to have it in hardcopy. cheers, damon -- Damon Muller | Did a large procession wave their torches Criminologist/Linux Geek | As my head fell in the basket, http://killfilter.com | And was everybody dancing on the casket... PGP (GnuPG): A136E829 | - TBMG, Dead pgpKuz3S5TwM7.pgp Description: PGP signature
Re: Samba setup
At 08:59 PM 10/24/00 +0200, you wrote: Does anyone know if it is possible to replace a Windows NT domain controler by a samba server so that a newly installed client system creates its entry in the domain automatically? I think MS works that way, doesn't it? Kinda - it depends on your clients more than anything. Samba 2.0.7 is the latest official version, and can act as a domain controller to authenticate and provide file and print sharing for win95/8 machines. It cannot act as a PDC for a domain of NT workstations though. Samba 2.1.x is *supposed* to have full PDC/BDC support for NT domains, but its still work in progress, I have a dozen win95b machines using an old pentium as a samba server - rocks seriously hard considering the budget was $100 NZ, and that was spend on the O'Reilly book Samba. I thoroughly recommend it to you. -- Criggie
Samba setup
Does anyone know if it is possible to replace a Windows NT domain controler by a samba server so that a newly installed client system creates its entry in the domain automatically? I think MS works that way, doesn't it? Michael -- Michael Meskes Michael@Fam-Meskes.De Go SF 49ers! Go Rhein Fire! Use Debian GNU/Linux! Use PostgreSQL!
Re: Samba Setup
Jay Kelly wrote: Hello All, I thought I would take a crack at Samba so I installed Samba. Now what do I need to do for my window98 clients to log in to samba? What change to my network setting will I need to make? Will my Primary Network Login be Microsoft Family or Client for Microsoft Networks? Do I need to change my Domain to point to Sambe? Any help would be greatly appeciated. Thanks Jay I'm not sure how to set up Samba to function as a domain controller, which your question implies you're trying to do. However, if you're just trying to share out stuff, like hard drives, folders, and printers, do the following. You'll need to edit /etc/samba/smb.conf to define your shares; with the comments sprinkled throughout, it's fairly intuitive for the basics. (You can also use SWAT (apt-get install swat) for a web-based configuration tool, but I've never had any success with it.) Then, IIRC, you'll need to run smbpasswd to assign a username/password to the people you want to give access to. Finally, on the Windows box, you would simply map a drive to \\YourLinuxComputer'sName\TheShareDefinedInSmb.conf. Your logon will probably need to be Client for Microsoft Networks, but I'm not sure. -- Kent West [EMAIL PROTECTED]
RE: RE: Samba Setup
Hello I setup and got Samba working with a Win95 machine. Under the My Computer you right click on the item you want to share and select Sharing from that menu and set up the item for sharing. It's pretty easy to understand. In the Control Panel, Network, setup your you'r Windows system to have the same Workgroup name that you are in on your Linux system. And give your Windows box a unique Computer name. Then you have to edit your samba.conf file on your Linux system according to the instructions. I was able to edit most of this without looking at the instructions much, as most of the file samba.conf file is setup in a logical fashion. I used a text editor. You can even set up your Linux home directory as a share. Then when you login on Windows and click on Network Neighborhood you will have access to your home directory. You can even setup your home directory to be seen from My Computer be doing a little drive mapping. FYI, you have to have your Windows network setup with an IP address and NetEUI for all this to work. The thing I never did figure out how to do was to access the windows shares from Linux. This was because my wife started whining about how since I setup a network that it was slowing down her computer. Well I hope this helps Walt in Colorado -Original Message- From: Kent West [mailto:[EMAIL PROTECTED] Sent: Thursday, 06 July, 2000 12:12 PM To: Jay Kelly Cc: debian-user@lists.debian.org Subject: Re: Samba Setup Jay Kelly wrote: Hello All, I thought I would take a crack at Samba so I installed Samba. Now what do I need to do for my window98 clients to log in to samba? What change to my network setting will I need to make? Will my Primary Network Login be Microsoft Family or Client for Microsoft Networks? Do I need to change my Domain to point to Samba? Any help would be greatly appreciated. Thanks Jay I'm not sure how to set up Samba to function as a domain controller, which your question implies you're trying to do. However, if you're just trying to share out stuff, like hard drives, folders, and printers, do the following. You'll need to edit /etc/samba/smb.conf to define your shares; with the comments sprinkled throughout, it's fairly intuitive for the basics. (You can also use SWAT (apt-get install swat) for a web-based configuration tool, but I've never had any success with it.) Then, IIRC, you'll need to run smbpasswd to assign a username/password to the people you want to give access to. Finally, on the Windows box, you would simply map a drive to \\YourLinuxComputer'sName\TheShareDefinedInSmb.conf. Your logon will probably need to be Client for Microsoft Networks, but I'm not sure. -- Kent West [EMAIL PROTECTED]
Re: RE: Samba Setup
Walter Williams wrote: The thing I never did figure out how to do was to access the windows shares from Linux. This was because my wife started whining about how since I setup a network that it was slowing down her computer. If the Windoze box is called winbox and the shared drive is C, then on the Linux box to mount that share at the mount point /mnt/winc do (as root): smbmount //winbox/c /mnt/winc You'll then be prompted for a password. If no password was specified on the Windoze machine, just hit enter. Otherwise enter the password. This is presuming that the Windoze machine has an entry in the /etc/hosts file on the Linux box. Otherwise, the Windoze machine's hostname can be replaced by its numeric IP. -- Mike Werner KA8YSD | Where do you want to go today? | As far from Redmond as possible! '91 GS500E| Morgantown WV | Only dead fish go with the flow.
RE: RE: Samba Setup
That's easy..i.e. viewing and accessing a Windows 95/98/NT share from a Linux box. Use smbclient or smbmount. For example, say you have a shared directory on the M$ Windows box (c:\My Documents on the computer Windoze), on your Linux box, execute the following to make sure the share is available for either viewing/ accessing or mounting: smbclient -U% -L windoze I can't quite recall how the output screen looks like (since I am writing this using a M$ Windoze program...yup would you believe it! The company which I work for does not allow any other OS! [EMAIL PROTECTED]) but it should show you the the available shares on Windoze and also the names of other computers on the same subnet (domain?). To access the shared directory (similar to using ftp) issue the following command: smbclient //windoze/My Documents -U username(Note the inverted commas as the path includes a space) You will be prompted for a password: Password: Type in the corresponding password for the user username. You should then see the smb prompt: smb The commands should be similar to ftp commands. If you want to skip the password step, execute the following: smbclient //windoze/My Documents -U username -P password But this allows someone overlooking you shopulder to view your password in clear text (which is why I prefer the latter without the -P). For mounting a smb share, execute the following: smbmount -o username=username,password=password //windoze/My Documents /mount point/ To check that the mount was successful, do a: df -h I use this quite frequently in my previous company for performing backup of Windoze boxes to Linux boxes using Samba! Patrick Cheong E-mail: [EMAIL PROTECTED] -Original Message- From: Walter Williams [SMTP:[EMAIL PROTECTED] Sent: Friday, July 07, 2000 3:23 AM To: Debian ListServer (E-mail) Subject: RE: RE: Samba Setup Hello I setup and got Samba working with a Win95 machine. Under the My Computer you right click on the item you want to share and select Sharing from that menu and set up the item for sharing. It's pretty easy to understand. In the Control Panel, Network, setup your you'r Windows system to have the same Workgroup name that you are in on your Linux system. And give your Windows box a unique Computer name. Then you have to edit your samba.conf file on your Linux system according to the instructions. I was able to edit most of this without looking at the instructions much, as most of the file samba.conf file is setup in a logical fashion. I used a text editor. You can even set up your Linux home directory as a share. Then when you login on Windows and click on Network Neighborhood you will have access to your home directory. You can even setup your home directory to be seen from My Computer be doing a little drive mapping. FYI, you have to have your Windows network setup with an IP address and NetEUI for all this to work. The thing I never did figure out how to do was to access the windows shares from Linux. This was because my wife started whining about how since I setup a network that it was slowing down her computer. Well I hope this helps Walt in Colorado -Original Message- From: Kent West [mailto:[EMAIL PROTECTED] Sent: Thursday, 06 July, 2000 12:12 PM To: Jay Kelly Cc: debian-user@lists.debian.org Subject: Re: Samba Setup Jay Kelly wrote: Hello All, I thought I would take a crack at Samba so I installed Samba. Now what do I need to do for my window98 clients to log in to samba? What change to my network setting will I need to make? Will my Primary Network Login be Microsoft Family or Client for Microsoft Networks? Do I need to change my Domain to point to Samba? Any help would be greatly appreciated. Thanks Jay I'm not sure how to set up Samba to function as a domain controller, which your question implies you're trying to do. However, if you're just trying to share out stuff, like hard drives, folders, and printers, do the following. You'll need to edit /etc/samba/smb.conf to define your shares; with the comments sprinkled throughout, it's fairly intuitive for the basics. (You can also use SWAT (apt-get install swat) for a web-based configuration tool, but I've never had any success with it.) Then, IIRC, you'll need to run smbpasswd to assign a username/password to the people you want to give access to. Finally, on the Windows box, you would simply map a drive to \\YourLinuxComputer'sName\TheShareDefinedInSmb.conf. Your logon will probably need to be Client for Microsoft Networks, but I'm not sure. -- Kent West [EMAIL PROTECTED] -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Samba Setup
Hello All, I thought I would take a crack at Samba so I installed Samba. Now what do I need to do for my window98 clients to log in to samba? What change to my network setting will I need to make? Will my Primary Network Login be Microsoft Family or Client for Microsoft Networks? Do I need to change my Domain to point to Sambe? Any help would be greatly appeciated. Thanks Jay -- It feels so good, It's a marginal risk, when I clear off windows with fdisk Powered by Debian GNU/Linux. http://www.debian.org
Re: Samba Setup
Hi Jay, Well, to install nmap do `apt-get install nmap` Might as well get it, it as a good tool. But from that lynx error it sounds like there is something wrong with SWAT. What version of Debian are you using? Perhaps `apt-get remove samba` then `apt-get update` then `apt-get install samba` will help, there is a possibility that there was a bug in a samba package built at one time... this will make sure you are installing the newest version of samba for your Debian version... Rob On Tue, May 16, 2000 at 01:02:07PM -0700, Jay Kelly wrote: Ok, When I run lynx localhost:901 I get errorAlert! Unexpected network read error; connection aborted. Alert! Unable to access document. And if I try nmap I get command not found. So what do you think I need to do?
Re: Samba Setup
Odd.. I don't have netscape 4.x installed, but the newest mozilla. I installed swat to test it out ( I am on woody ), hmm.. do you have nmap installed? sending the output of `nmap localhost` might help, just to ensure that SWAT is running on port 901. Hmm, the Broken Pipe error does seem to indicate some other problem.. perhaps use 'nmap localhost` and `lynx localhost:901` and post the output to the list, that should make things more apparent.. Rob On Mon, May 15, 2000 at 07:43:25PM -0700, Jay Kelly wrote: What does it mean when I try to connect though Netscape and I get a error of Network Error: Broken Pipe??? Cant seem to still connect. I have swat in my /etc services and in inetd.conf. Any Idea's -Original Message- From: Rob [mailto:[EMAIL PROTECTED] Sent: Monday, May 15, 2000 7:18 PM To: debian-user@lists.debian.org Subject: Re: Samba Setup Hi Jay, I assume you are trying to configure samba through SWAT.. ( I like using the manpage and editing smb.conf, but that's me :) Is SWAT in your /etc/inetd NOT commented out ( without a # in front of it ), is inetd running, which port are you trying to connect to? Thanks, Rob Namodn On Mon, May 15, 2000 at 06:46:43PM -0700, Jay Kelly wrote: I need some help setting up Samba.. Sorry to keep bugin you guys . Im getting there. I try to configure samba thought netscape but I am gettting an error Netscapes connection was refused by the server. Im sure I installed it when I installed Debian. Any Ideas guys -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
RE: Samba Setup
Ok, When I run lynx localhost:901 I get errorAlert! Unexpected network read error; connection aborted. Alert! Unable to access document. And if I try nmap I get command not found. So what do you think I need to do? -Original Message- From: Rob [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 16, 2000 12:27 AM To: Jay Kelly Cc: debian-user@lists.debian.org Subject: Re: Samba Setup Odd.. I don't have netscape 4.x installed, but the newest mozilla. I installed swat to test it out ( I am on woody ), hmm.. do you have nmap installed? sending the output of `nmap localhost` might help, just to ensure that SWAT is running on port 901. Hmm, the Broken Pipe error does seem to indicate some other problem.. perhaps use 'nmap localhost` and `lynx localhost:901` and post the output to the list, that should make things more apparent.. Rob On Mon, May 15, 2000 at 07:43:25PM -0700, Jay Kelly wrote: What does it mean when I try to connect though Netscape and I get a error of Network Error: Broken Pipe??? Cant seem to still connect. I have swat in my /etc services and in inetd.conf. Any Idea's -Original Message- From: Rob [mailto:[EMAIL PROTECTED] Sent: Monday, May 15, 2000 7:18 PM To: debian-user@lists.debian.org Subject: Re: Samba Setup Hi Jay, I assume you are trying to configure samba through SWAT.. ( I like using the manpage and editing smb.conf, but that's me :) Is SWAT in your /etc/inetd NOT commented out ( without a # in front of it ), is inetd running, which port are you trying to connect to? Thanks, Rob Namodn On Mon, May 15, 2000 at 06:46:43PM -0700, Jay Kelly wrote: I need some help setting up Samba.. Sorry to keep bugin you guys . Im getting there. I try to configure samba thought netscape but I am gettting an error Netscapes connection was refused by the server. Im sure I installed it when I installed Debian. Any Ideas guys -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
RE: Samba Setup
I notice when I go into /etc there isnt a file named smb.conf. Does that mean that samba is not installed or do I need to create the file myself? -Original Message- From: Rob [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 16, 2000 12:27 AM To: Jay Kelly Cc: debian-user@lists.debian.org Subject: Re: Samba Setup Odd.. I don't have netscape 4.x installed, but the newest mozilla. I installed swat to test it out ( I am on woody ), hmm.. do you have nmap installed? sending the output of `nmap localhost` might help, just to ensure that SWAT is running on port 901. Hmm, the Broken Pipe error does seem to indicate some other problem.. perhaps use 'nmap localhost` and `lynx localhost:901` and post the output to the list, that should make things more apparent.. Rob On Mon, May 15, 2000 at 07:43:25PM -0700, Jay Kelly wrote: What does it mean when I try to connect though Netscape and I get a error of Network Error: Broken Pipe??? Cant seem to still connect. I have swat in my /etc services and in inetd.conf. Any Idea's -Original Message- From: Rob [mailto:[EMAIL PROTECTED] Sent: Monday, May 15, 2000 7:18 PM To: debian-user@lists.debian.org Subject: Re: Samba Setup Hi Jay, I assume you are trying to configure samba through SWAT.. ( I like using the manpage and editing smb.conf, but that's me :) Is SWAT in your /etc/inetd NOT commented out ( without a # in front of it ), is inetd running, which port are you trying to connect to? Thanks, Rob Namodn On Mon, May 15, 2000 at 06:46:43PM -0700, Jay Kelly wrote: I need some help setting up Samba.. Sorry to keep bugin you guys . Im getting there. I try to configure samba thought netscape but I am gettting an error Netscapes connection was refused by the server. Im sure I installed it when I installed Debian. Any Ideas guys -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Samba Setup
Jay Kelly [EMAIL PROTECTED] writes: I notice when I go into /etc there isnt a file named smb.conf. Does that mean that samba is not installed or do I need to create the file myself? On Debian it's in /etc/samba. locate, find and dpkg -S are your friends! Gary
Samba Setup
I need some help setting up Samba.. Sorry to keep bugin you guys . Im getting there. I try to configure samba thought netscape but I am gettting an error Netscapes connection was refused by the server. Im sure I installed it when I installed Debian. Any Ideas guys
Re: Samba Setup
Hi Jay, I assume you are trying to configure samba through SWAT.. ( I like using the manpage and editing smb.conf, but that's me :) Is SWAT in your /etc/inetd NOT commented out ( without a # in front of it ), is inetd running, which port are you trying to connect to? Thanks, Rob Namodn On Mon, May 15, 2000 at 06:46:43PM -0700, Jay Kelly wrote: I need some help setting up Samba.. Sorry to keep bugin you guys . Im getting there. I try to configure samba thought netscape but I am gettting an error Netscapes connection was refused by the server. Im sure I installed it when I installed Debian. Any Ideas guys -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
RE: Samba Setup
What does it mean when I try to connect though Netscape and I get a error of Network Error: Broken Pipe??? Cant seem to still connect. I have swat in my /etc services and in inetd.conf. Any Idea's -Original Message- From: Rob [mailto:[EMAIL PROTECTED] Sent: Monday, May 15, 2000 7:18 PM To: debian-user@lists.debian.org Subject: Re: Samba Setup Hi Jay, I assume you are trying to configure samba through SWAT.. ( I like using the manpage and editing smb.conf, but that's me :) Is SWAT in your /etc/inetd NOT commented out ( without a # in front of it ), is inetd running, which port are you trying to connect to? Thanks, Rob Namodn On Mon, May 15, 2000 at 06:46:43PM -0700, Jay Kelly wrote: I need some help setting up Samba.. Sorry to keep bugin you guys . Im getting there. I try to configure samba thought netscape but I am gettting an error Netscapes connection was refused by the server. Im sure I installed it when I installed Debian. Any Ideas guys -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null