date:20130916

AD1981HD
Rev. 0 | Page 10 of 16
HD AUDIO CODEC INFORMATION
Table 20. Widget List and Descriptions
NID Name Type ID Type Description
05 Port-D (Line Out) 4 Pin complex Port-D pin drivers. Typically used as rear 
panel line output.

1A Port-D Mix Amp 3 Audio selector Individual gain control for the Port
D (front) input to the analog mixer.


seem Port-D Mix Amp is muted (node 0x1a)



Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out
  Control: name=Front Playback Volume, index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name=Front Playback Switch, index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x3f 0x3f]
  Pincap 0x0001173f: IN OUT HP EAPD Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
  EAPD 0x0:
  Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 2
 0x03 0x0e*


Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
  Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
  Amp-Out vals:  [0x80 0x80]
  Connection: 1
 0x05


try hda-analyzer to change the Amp-Out vals of node 0x1a  from [0x80 0x80] to 
[0x00 0x00]

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1161523

Title:
  [PORTEGE M500, Analog Devices AD1981, Speaker, Internal] No sound at
  all

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  There is no sound output from my laptop speakers... however, when
  using headphones the volume is very very low, almost inaudible.

  I have checked the volume levels with alsamixer and they are all set
  to the maximum level. What can I do?

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.5.0-26.42~precise1-generic 3.5.7.6
  Uname: Linux 3.5.0-26-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25.
  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  vina   1886 F pulseaudio
vina   5501 F alsamixer
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0x6408 irq 43'
 Mixer name : 'Analog Devices AD1981'
 Components : 'HDA:11d41981,11790311,00100200 
HDA:11c13026,11790001,00100700'
 Controls  : 35
 Simple ctrls  : 21
  Date: Thu Mar 28 13:11:38 2013
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release i386 
(20130213)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_DevicesInUse:
   953  1886  5501   953   953  Slmodemd  F slmodemd
vina  F pulseaudio
vina  F alsamixer
   /dev/snd/pcmC0D6c:   Slmodemd  F...m slmodemd
   /dev/snd/pcmC0D6p:   Slmodemd  F...m slmodemd
  Symptom_Jack: Speaker, Internal
  Symptom_Type: No sound at all
  Title: [PORTEGE M500, Analog Devices AD1981, Speaker, Internal] No sound at 
all
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserAsoundrc:
   
  UserAsoundrcAsoundconf:
   
  dmi.bios.date: 08/24/2006
  dmi.bios.vendor: TOSHIBA
  dmi.bios.version: Version 1.40
  dmi.board.name: Portable PC
  dmi.board.vendor: TOSHIBA
  dmi.board.version: Version A0
  dmi.chassis.asset.tag: 00
  dmi.chassis.type: 10
  dmi.chassis.vendor: TOSHIBA
  dmi.chassis.version: Version 1.0
  dmi.modalias: 
dmi:bvnTOSHIBA:bvrVersion1.40:bd08/24/2006:svnTOSHIBA:pnPORTEGEM500:pvrPPM50Z-05W01X:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0:
  dmi.product.name: PORTEGE M500
  dmi.product.version: PPM50Z-05W01X
  dmi.sys.vendor: TOSHIBA
  mtime.conffile..etc.modprobe.d.alsa.base.conf: 2013-03-28T13:08:15.532810

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1161523/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225843] Re: Freeciv

2013-09-16 Thread Chris Coulson

** Package changed: firefox (Ubuntu) = ubuntu

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1225843

Title:
  Freeciv

Status in Ubuntu:
  New

Bug description:
  Package won't start after being installed and listed on launcher.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1225843/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1059529] Re: Multiple Network Authentication Dialogs

2013-09-16 Thread Otus

This is fixed in (at least) raring, but it would be great to get the fix
backported to precise as well, so someone with the powers should mark it
as affecting Precise before marking it fixed for Ubuntu.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1059529

Title:
  Multiple Network Authentication Dialogs

Status in “network-manager” package in Ubuntu:
  Confirmed

Bug description:
  Network Manager opens multiple windows asking network authentication.

  If network signal is weak, this can happen automatically as NM loses
  the network then finds it again, asking for authentication. This can
  result in tens of windows after a few hours, if unsupervised.

  To test manually:

  1. Select a wireless network for which no password has been saved from 
nm-applet.
  2. The dialog pops up.
  3. Without closing the dialog, reselect the network from nm-applet.
  4. A second (identical) dialog pops up.
  (Expected: The old dialog is reused, or is closed as stale.)

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: network-manager 0.9.4.0-0ubuntu4.1
  ProcVersionSignature: Ubuntu 3.2.0-29.46-generic-pae 3.2.24
  Uname: Linux 3.2.0-29-generic-pae i686
  ApportVersion: 2.0.1-0ubuntu12
  Architecture: i386
  CasperVersion: 1.315
  Date: Mon Oct  1 14:22:27 2012
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  IpRoute:
   default via 192.168.0.1 dev wlan0  proto static
   169.254.0.0/16 dev wlan0  scope link  metric 1000
   192.168.0.0/24 dev wlan0  proto kernel  scope link  src 192.168.0.15  metric 
2
  LiveMediaBuild: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 
(20120817.3)
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
   WimaxEnabled=true
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-con:
   NAME  UUID   TYPE
  TIMESTAMPTIMESTAMP-REAL AUTOCONNECT   READONLY   
DBUS-PATH
   Wired connection 112cd62ad-698e-4507-a944-0d89176544fd   
802-3-ethernet1349083407   Mon 01 Oct 2012 12:23:27 PM EEST   yes   
no /org/freedesktop/NetworkManager/Settings/2
   penthouse a48953a3-d68b-41b9-81bb-4d2027587186   
802-11-wireless   1349090319   Mon 01 Oct 2012 02:18:39 PM EEST   yes   
no /org/freedesktop/NetworkManager/Settings/1
   temp  d3d7b612-ca12-4fe1-8cfd-2d0d1b2eb3f6   
802-11-wireless   1348708389   Thu 27 Sep 2012 04:13:09 AM EEST   yes   
no /org/freedesktop/NetworkManager/Settings/0
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH
   eth0   802-3-ethernetunavailable   
/org/freedesktop/NetworkManager/Devices/1
   wlan0  802-11-wireless   connected 
/org/freedesktop/NetworkManager/Devices/0
  nmcli-nm:
   RUNNING VERSIONSTATE   NET-ENABLED   WIFI-HARDWARE   
WIFI   WWAN-HARDWARE   WWAN
   running 0.9.4.0connected   enabled   enabled 
enabledenabled disabled

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1059529/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

** Bug watch added: Gentoo Bugzilla #423273
   https://bugs.gentoo.org/show_bug.cgi?id=423273

** Also affects: gentoo via
   https://bugs.gentoo.org/show_bug.cgi?id=423273
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Unknown

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

  00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge 
[K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d800-d8ff
Prefetchable memory behind bridge: c000-cfff
Capabilities: access denied
Kernel modules: shpchp

  00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge 
Controller (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 1000-1fff
Memory behind bridge: 4000-401f
Prefetchable memory behind bridge:

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

I'm the owner of the same laptop model and also the reporter of the same
issue on Gentoo. As far as I've seen, starting with kernel 3.11 alsa
doesn't even show the volume for the front speaker. It's completely
gone. :))

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Unknown

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

  00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge 
[K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d800-d8ff
Prefetchable memory behind bridge: c000-cfff
Capabilities: access denied
Kernel modules: shpchp

  00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge 
Controller (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 1000-1fff
Memory behind bridge: 4000-401f
Prefetchable memory behind bridge:

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

device.profile.name = analog-stereo
device.profile.description = Analog Stereo
device.description = VT8237A/VT8251 HDA Controller Analog
Stereo
alsa.mixer_name = VIA VT1708
alsa.components = HDA:11061708,173410d9,00100500
HDA:10573055,10573055,00100700
module-udev-detect.discovered = 1
device.icon_name = audio-card-pci
ports:
analog-output-headphones: Headphones (priority 9000, available:
no)
properties:

active port: analog-output-headphones

Did you use latest alsa driver since VT1708 does not support unsolicited
event ?

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/?id=05dc0fc9d01537a66d9a0cffe2e96296d8f4c7ac

--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
[FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
Confirmed
Status in Gentoo Linux:
Unknown

Bug description:
Hello

Please note: Bug #1225622 reports a similar issue against the same
hardware but diffirent Ubuntu software. Additionally, the said bug
reports issues related to no sound. Due to symptoms and Ubuntu
versions differing I am creating this report.

I will add as much detail as possible. Please contact me if there are
steps that I can take to facilitate further.

Symptoms:
After a full clean install there was one symptom, very low sound volume that
I could detect with headphones. The fans on this system plus other ambient
sound made it difficult to confirm if the same volume of sound was being
emitted by the speaker.

The Sound System Settings displayed both the internal speaker and
headphone as Play Sound Through. I would have to do an erase and
install of the said OS to verify this with 100% accuracy or startup
from the live CD. As quite some time has been exhausted trying to
workaround the issue I can't make this claim with complete accuracy.

Workarounds:
Followed Installation Instructions at
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4
KiB) as per
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

Interstingly, the above workaround created a secondary issue, Ubuntu
Software Center continuosly quit unexpectedly while running a spinng
gear of cogwheel. I can't verify if it the secondary issue that I
mentioning here is completely related but the error messages would
certainly suggest it. I recovered out of it by following the first
bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
errors-relating-to-the-launch-of-the-software-center

After fixing the secondary issue with Ubuntu Software Center, I
restarted and launched Sound System Settings but the Output tab
display nothing in the list. If I plug headphones into the respective
jack, the following appears under the Output tab, Headphones,
VT8237A/VT8251 HDA Controller. Although the focus of this report is
audio out volume leve, plugging a mic also displays the same in the
Input tab. The headphones continue to emit sound but it is very low in
volume, barely audible.

1)
~$ lsb_release -rd
Description: Ubuntu 12.04.3 LTS
Release: 12.04

-Software- fresh install, ~ 2 days
UBUNTU
Release 12.04 (precise) 32-bit
Kernel Linux 3.8.0-30-generic
GNOME 3.4.2

As reported in the terminal
~$ lspci -v

00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge
[K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus:

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: alsa-driver (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Unknown

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

  00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge 
[K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d800-d8ff
Prefetchable memory behind bridge: c000-cfff
Capabilities: access denied
Kernel modules: shpchp

  00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge 
Controller (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 1000-1fff
Memory behind bridge: 4000-401f
Prefetchable memory behind bridge: 4020-403f
Capabilities: access denied
Kernel driver in use:

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

when you plugged the headphone and the driver return false when it
cannot detect headphone

pulseaudio switch to speaker profile and turn off the headphone volume

Control.13 {
iface CARD
name 'Front Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}

http://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/src/modules/alsa/mixer/paths/analog-output-speaker.conf

[Jack Headphone]
state.plugged = no
state.unplugged = unknown

; This profile path is intended to control the speaker, let's mute headphones
; else there will be a spike when plugging in headphones
[Element Headphone]
switch = off
volume = off

--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
[FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
Confirmed
Status in Gentoo Linux:
Unknown

Bug description:
Hello

I will add as much detail as possible. Please contact me if there are
steps that I can take to facilitate further.

1)
~$ lsb_release -rd
Description: Ubuntu 12.04.3 LTS
Release: 12.04

-Software- fresh install, ~ 2 days
UBUNTU
Release 12.04 (precise) 32-bit
Kernel Linux 3.8.0-30-generic
GNOME 3.4.2

As reported in the terminal
~$ lspci -v

00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge
[K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d800-d8ff
Prefetchable memory behind bridge: c000-cfff
Capabilities: access denied

[Desktop-packages] [Bug 1184451] Re: Ubuntu 13.10 random screen freeze while Normal OS activites

2013-09-16 Thread Pierre-Luc Gagnon

Eh the freezes started occurring again, with the older kernel and very
frequently too.  I thought I was on to something.  Oh well.

Also I notice that after rebooting it takes a little while before the
freezes start

Maybe relevant info:
KDE 4.11.1
Linux 3.11.0-7-generic x86_64
CPU0: Intel(R) Core(TM) i5 CPU   M 560  @ 2.67GHz (fam: 06, model: 25, 
stepping: 05)
Hybrid graphics (nVidia Optimus)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1184451

Title:
  Ubuntu 13.10 random screen freeze while Normal OS activites

Status in “xorg-server” package in Ubuntu:
  Confirmed

Bug description:
  I have recently, re-installed fresh ubuntu 13.10 distribution release.
  But everything worked fine. until recently i had strange problem of my 
display screen getting freezed randomly; but no response to either 
mouse/keyboard.
  But i want to point it out; it happens randomly and is not specific ?
  Other day, i had music player playing in background, but screen freezed. but 
my music was still running. 
  Kindly note, i used multiple monitor setup and same issue of screen freeze 
also cropped up.

  I,am not sure, whether it is bug ?

  thanks for the expertise support.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184451/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Launchpad has imported 15 comments from the remote bug at
https://bugs.gentoo.org/show_bug.cgi?id=423273.

If you reply to an imported comment from within Launchpad, your comment
will be sent to the remote bug automatically. Read more about
Launchpad's inter-bugtracker facilities at
https://help.launchpad.net/InterBugTracking.


On 2012-06-24T07:21:50+00:00 Boshu wrote:

Upgrading gentoo-sources from 3.0.6 to newer and stable versions leads to 
very-very low sound volume. The laptop is a Fujitsu-Siemens Amilo La1703.
Card: HDA VIA VT82XX
Chipset: VIA VT1708

#cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.24.

#cat /proc/asound/cards
0 [VT82xx ]: HDA-Intel - HDA VIA VT82xx
HDA VIA VT82xx at 0xd900 irq 17

#cat /proc/asound/devices
1: : sequencer
2: [ 0- 6]: digital audio playback
3: [ 0- 6]: digital audio capture
4: [ 0- 0]: digital audio playback
5: [ 0- 0]: digital audio capture
6: [ 0- 1]: hardware dependent
7: [ 0- 0]: hardware dependent
8: [ 0] : control
33: : timer

#cat /proc/asound/pcm
00-00: VT1708 Analog : VT1708 Analog : playback 1 : capture 2
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1

With alsamixer I've noticed:
For gentoo-sources-3.0.6 I have master front db gain 14.00(maximum value). 
This is the kernel in use with acceptable sound volume.
For newer gentoo-sources shows master db gain 6.75(maximum value)

Maybe the above change of value is the reason why the sound is almost
unnoticeable.

Reply at: https://bugs.launchpad.net/ubuntu/+source/alsa-
driver/+bug/1225789/comments/0


On 2012-06-24T07:24:08+00:00 Boshu wrote:

Created attachment 316123
emerge --info

emerge --info

Reply at: https://bugs.launchpad.net/ubuntu/+source/alsa-
driver/+bug/1225789/comments/1


On 2012-06-24T07:26:00+00:00 Boshu wrote:

Portage 2.1.10.65 (default/linux/amd64/10.0, gcc-4.5.3, glibc-2.14.1-r3, 
3.0.6-gentoo x86_64)
=
System uname: 
Linux-3.0.6-gentoo-x86_64-Mobile_AMD_Sempron-tm-_Processor_3500+-with-gentoo-2.1
Timestamp of tree: Sun, 24 Jun 2012 06:45:01 +
app-shells/bash:  4.2_p20
dev-java/java-config: 2.1.11-r3
dev-lang/python:  2.7.3-r2, 3.1.5, 3.2.3
dev-util/cmake:   2.8.7-r5
dev-util/pkgconfig:   0.26
sys-apps/baselayout:  2.1-r1
sys-apps/openrc:  0.9.8.4
sys-apps/sandbox: 2.5
sys-devel/autoconf:   2.13, 2.68
sys-devel/automake:   1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r3, 1.10.3, 1.11.1
sys-devel/binutils:   2.21.1-r1
sys-devel/gcc:4.4.5, 4.5.3-r2
sys-devel/gcc-config: 1.6
sys-devel/libtool:2.4-r1
sys-devel/make:   3.82-r1
sys-kernel/linux-headers: 3.1 (virtual/os-headers)
sys-libs/glibc:   2.14.1-r3
Repositories: gentoo kormoc
ACCEPT_KEYWORDS=amd64
ACCEPT_LICENSE=* -@EULA
CBUILD=x86_64-pc-linux-gnu
CFLAGS=-O2 -march=k8 -msse3 -pipe -fomit-frame-pointer -finline-functions
CHOST=x86_64-pc-linux-gnu
CONFIG_PROTECT=/etc /usr/share/config /usr/share/gnupg/qualified.txt 
/var/lib/hsqldb
CONFIG_PROTECT_MASK=/etc/ca-certificates.conf /etc/dconf /etc/env.d 
/etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release 
/etc/revdep-rebuild /etc/sandbox.d /etc/terminfo
CXXFLAGS=-O2 -march=k8 -msse3 -pipe -fomit-frame-pointer -finline-functions
DISTDIR=/usr/portage/distfiles
EMERGE_DEFAULT_OPTS=--autounmask=n
FCFLAGS=-O2 -pipe
FEATURES=assume-digests binpkg-logs config-protect-if-modified distlocks 
ebuild-locks fixlafiles news parallel-fetch parse-eapi-ebuild-head 
protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs 
unmerge-orphans
FFLAGS=-O2 -pipe
GENTOO_MIRRORS=ftp://ftp.romnet.org/gentoo/;
LANG=C
LDFLAGS=-Wl,-O1 -Wl,--as-needed
LINGUAS=en_GB
PKGDIR=/usr/portage/packages
PORTAGE_CONFIGROOT=/
PORTAGE_RSYNC_OPTS=--recursive --links --safe-links --perms --times --compress 
--force --whole-file --delete --stats --human-readable --timeout=180 
--exclude=/distfiles --exclude=/local --exclude=/packages
PORTAGE_TMPDIR=/var/tmp
PORTDIR=/usr/portage
PORTDIR_OVERLAY=/var/lib/layman/kormoc
SYNC=rsync://rsync.ro.gentoo.org/gentoo-portage
USE=3dnow X a52 aac acl acpi alsa amd64 berkdb bluetooth bzip2 cdr cli 
cracklib crypt cups cxx dri dvd dvdr fortran gdbm gif gpm iconv ipv6 jpeg 
jpeg2k mad mmx modules mp3 mpeg mudflap multilib ncurses nls nptl ogg opengl 
openmp pam pcre png ppds pppd readline rtc session sse sse2 ssl tcpd tiff 
truetype unicode usb vorbis wmf x264 xorg xv xvid zlib ALSA_CARDS=ali5451 
als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 
es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx 
via82xx-modem ymfpci ALSA_PCM_PLUGINS=adpcm alaw asym copy dmix dshare dsnoop 
empty extplug file hooks

[Desktop-packages] [Bug 1222853] Re: [sandybridge-m-gt2] GPU lockup IPEHR: 0x0b160001 IPEHR: 0x0b140001

*** This bug is a duplicate of bug 1041790 ***
https://bugs.launchpad.net/bugs/1041790

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: xserver-xorg-video-intel (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1222853

Title:
  [sandybridge-m-gt2] GPU lockup  IPEHR: 0x0b160001 IPEHR: 0x0b140001

Status in “xserver-xorg-video-intel” package in Ubuntu:
  Confirmed

Bug description:
  I'm not sure if this is a duplicate of any other bugs with similar
  name, so just in case this is a separate report.

  For the past few days I experience frequent lockups.  
  Usually theese are 5-10 sec long, and only visual, for example music playback 
continues. However there were a few cases when i had to restart my computer.
   
  They happen almost randomly, but I noticed that in some cases they are more 
frequent, for example using  virtualbox (win7 machine,  3d acceleration 
enabled), and video playback in flash - youtube).

  ProblemType: Crash
  DistroRelease: Ubuntu 13.10
  Package: xserver-xorg-video-intel 2:2.21.14-4ubuntu3
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: amd64
  Chipset: sandybridge-m-gt2
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Mon Sep  9 12:51:01 2013
  DistUpgraded: 2013-06-24 19:15:01,815 DEBUG enabling apt cron job
  DistroCodename: saucy
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.2.16, 3.11.0-4-generic, x86_64: installed
   virtualbox, 4.2.16, 3.11.0-5-generic, x86_64: installed
  DuplicateSignature: [sandybridge-m-gt2] GPU lockup  IPEHR: 0x0b160001 IPEHR: 
0x0b140001 Ubuntu 13.10
  ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py
  ExtraDebuggingInterest: Yes
  GpuHangFrequency: Several times a day
  GpuHangReproducibility: Occurs more often under certain circumstances
  GpuHangStarted: Within the last few days
  GraphicsCard:
   Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
 Subsystem: Toshiba America Info Systems Device [1179:0009]
  InstallationDate: Installed on 2013-04-29 (133 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  InterpreterPath: /usr/bin/python3.3
  MachineType: TOSHIBA PORTEGE Z830
  MarkForUpload: True
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gpu-error-intel.py
  ProcEnviron:
   
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-4-generic 
root=/dev/mapper/hostname-root ro quiet libata.force=noncq splash 
pcie_aspm=force i915.i915_enable_fbc=1 i915.lvds_downclock=1 acpi_osi=Linux 
acpi_backlight=vendor elevator=noop vt.handoff=7
  RelatedPackageVersions:
   xserver-xorg 1:7.7+1ubuntu5
   libdrm2  2.4.46-1
   xserver-xorg-video-intel 2:2.21.14-4ubuntu3
  SourcePackage: xserver-xorg-video-intel
  Title: [sandybridge-m-gt2] GPU lockup  IPEHR: 0x0b160001 IPEHR: 0x0b140001
  UpgradeStatus: Upgraded to saucy on 2013-06-24 (76 days ago)
  UserGroups:
   
  dmi.bios.date: 04/18/2013
  dmi.bios.vendor: TOSHIBA
  dmi.bios.version: Version 1.80
  dmi.board.asset.tag: 00
  dmi.board.name: Portable PC
  dmi.board.vendor: TOSHIBA
  dmi.board.version: Version A0
  dmi.chassis.asset.tag: 00
  dmi.chassis.type: 10
  dmi.chassis.vendor: TOSHIBA
  dmi.chassis.version: Version 1.0
  dmi.modalias: 
dmi:bvnTOSHIBA:bvrVersion1.80:bd04/18/2013:svnTOSHIBA:pnPORTEGEZ830:pvrPT224E-017014HU:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0:
  dmi.product.name: PORTEGE Z830
  dmi.product.version: PT224E-017014HU
  dmi.sys.vendor: TOSHIBA
  version.compiz: compiz 1:0.9.10+13.10.20130828.2-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.46-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.2-1ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.2-1ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.14.2.901-2ubuntu4
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu6
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.14-4ubuntu3
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.9-2ubuntu1
  xserver.bootTime: Mon Sep  9 09:16:21 2013
  xserver.configfile: /etc/X11/xorg.conf
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   30855 
   vendor

[Desktop-packages] [Bug 1225895] [NEW] HUD activated upon return from lock screen

2013-09-16 Thread fyo

Public bug reported:

When returning to the desktop from the lock screen by entering the user
password, the HUD is activated as if the ALT key had been pressed.

13.10 daily

ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: gnome-power-manager 3.8.2-0ubuntu1
ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
Uname: Linux 3.11.0-7-generic x86_64
ApportVersion: 2.12.1-0ubuntu4
Architecture: amd64
Date: Mon Sep 16 09:39:06 2013
InstallationDate: Installed on 2013-09-14 (1 days ago)
InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130911)
MarkForUpload: True
SourcePackage: gnome-power-manager
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gnome-power-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug saucy

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-power-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1225895

Title:
  HUD activated upon return from lock screen

Status in “gnome-power-manager” package in Ubuntu:
  New

Bug description:
  When returning to the desktop from the lock screen by entering the
  user password, the HUD is activated as if the ALT key had been
  pressed.

  13.10 daily

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: gnome-power-manager 3.8.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Uname: Linux 3.11.0-7-generic x86_64
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: amd64
  Date: Mon Sep 16 09:39:06 2013
  InstallationDate: Installed on 2013-09-14 (1 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130911)
  MarkForUpload: True
  SourcePackage: gnome-power-manager
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-power-manager/+bug/1225895/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

I'm using:
*  media-sound/alsa-utils
  Latest version available: 1.0.27.1-r1
  Latest version installed: 1.0.25-r1
*  media-libs/alsa-lib
  Latest version available: 1.0.27.1
  Latest version installed: 1.0.25-r1
   As far as I know gentoo uses the in-kernel alsa-driver. There is no distinct 
package(alsa-driver) in portage. I'm using obsolete versions of the alsa 
packages due to the fact that when I tried to upgrade them I've had sound 
issues(probabily the same low sound volume, I don't remember for sure). For me 
the problem with upgrading the above packages is that the versions I'm using 
now are no longer in the portage tree, meaning it would be a pain in the ... to 
revert and make sound work again.
   Regarding the dissapearance of the front speaker volume in kernel 3.11 I can 
say that I've booted the laptop with the headphones pluged-in but the 
gnome-alsa-mixer was configured to ignore jack detection. Also I've verified 
the dissapearace using plain 'alsamixer' command. I didn't tried to boot the 
laptop with the headphones unplugged to see if the front speaker volume 
appears. Still, the volume in the headphones was way too low to be usable by me.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Won't Fix

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])

Re: [Desktop-packages] [Bug 1041790] Re: [snb] GPU lockup IPEHR: 0x0b160001 IPEHR: 0x0b140001, workaround i915.semaphores=0

2013-09-16 Thread Lorant Nemeth

Hi,

I can confirm, that this way I'm able to reproduce the bug as well.

Br,
 Loci

On 09/11/2013 03:02 AM, Alan Pope ㋛ wrote:
 I filed the duplicate of this bug 161 as I get this frequently on
 both my i7 laptop and i7 desktop.

 I think I found a way to reproduce it easily on demand. Open chromium,
 and visit google maps. Sign up for new maps. Visit somewhere on the
 map and zoom all the way in then zoom in and out a bit. I have triggered
 this bug a few times just by doing that. I'm not using dual screens or
 anything funky. Just a basic Ubuntu 13.10 install with Unity.


-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1041790

Title:
  [snb] GPU lockup  IPEHR: 0x0b160001 IPEHR: 0x0b140001, workaround
  i915.semaphores=0

Status in X.org xf86-video-intel:
  Confirmed
Status in “linux” package in Ubuntu:
  Confirmed
Status in “sandybridge-meta” package in Ubuntu:
  Confirmed
Status in “xserver-xorg-video-intel” package in Ubuntu:
  Triaged

Bug description:
  X locks up periodically for a 2 to ten seconds at a time and this
  crash log gets generated. It's significantly more than several times a
  day but not quite continuous.

  Temporarily disabiling semaphores seems to eliminate the problem.
  E.g.:

  $ sudo -s
  # echo 0  /sys/modules/i915/parameters/semaphores

  [Workaround]
  1.  Edit your /etc/default/grub file.
  2.  Change this line:

  GRUB_CMDLINE_LINUX_DEFAULT=quiet splash

  to

  GRUB_CMDLINE_LINUX_DEFAULT=quiet splash i915.semaphores=0

  3.  Then run

  sudo update-grub

  4.  And reboot

  If you indeed have this bug, that should stop the lockups from happening.
  If it doesn't, then file a new bug report.

  Side Effects:  Rendering throughput is dropped by 10% with SNA, or as
  much as 3x with UXA. OpenGL performance is likely to be reduced by
  about 30%. More CPU time is spent waiting for the GPU with rc6
  disabled, so increased power consumption.

  [Original Report]

  ProblemType: Crash
  DistroRelease: Ubuntu 12.10
  Package: xserver-xorg-video-intel 2:2.20.3-0ubuntu1
  Uname: Linux 3.6.0-rc3-git-20120826.1015 x86_64
  ApportVersion: 2.5.1-0ubuntu2
  Architecture: amd64
  Chipset: sandybridge-m-gt2
  Date: Sun Aug 26 16:06:32 2012
  DistroCodename: quantal
  DistroVariant: ubuntu
  DuplicateSignature: [sandybridge-m-gt2] GPU lockup  IPEHR: 0x0b160001 IPEHR: 
0x0b140001 Ubuntu 12.10
  EcryptfsInUse: Yes
  ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py
  GpuHangFrequency: Continuously
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Alpha amd64 (20120724.2)
  InterpreterPath: /usr/bin/python3.2mu
  MachineType: Dell Inc. Dell System XPS L502X
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gpu-error-intel.py
  ProcEnviron:

  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc3-git-20120826.1015 
root=UUID=135c8090-427c-460a-909d-eff262cd44b6 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   xserver-xorg 1:7.7+1ubuntu3
   libdrm2  2.4.38-0ubuntu2
   xserver-xorg-video-intel 2:2.20.3-0ubuntu1
  SourcePackage: xserver-xorg-video-intel
  Title: [sandybridge-m-gt2] GPU lockup  IPEHR: 0x0b160001 IPEHR: 0x0b140001
  UdevDb: Error: [Errno 2] No such file or directory: 'udevadm'
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  dmi.bios.date: 05/29/2012
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A11
  dmi.board.name: 0NJT03
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA11:bd05/29/2012:svnDellInc.:pnDellSystemXPSL502X:pvr:rvnDellInc.:rn0NJT03:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: Dell System XPS L502X
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1041790/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

The other problem is the volume control and switch at node 0x1f

This should be renamed to Front if pin is Line Out and Speaker if
pin is internal speaker

since PCM is only defined in the common path by pulseaudio

http://cgit.freedesktop.org/pulseaudio/pulseaudio/plain/src/modules/alsa/mixer/paths
/analog-output.conf.common


[Element PCM]
switch = mute
volume = merge
override-map.1 = all
override-map.2 = all-left,all-right


Node 0x1f [Pin Complex] wcaps 0x40010d: Stereo Amp-Out
  Control: name=PCM Playback Volume, index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name=PCM Playback Switch, index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name=Speaker Jack, index=0, device=0
  Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1
  Amp-Out vals:  [0x1b 0x1b]
  Pincap 0x001c: OUT HP Detect
  Pin Default 0x110140f0: [Jack] Line Out at Int Rear
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Connection: 1
 0x17

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Won't Fix

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

  00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

[Desktop-packages] [Bug 894665] Re: Characters in terminal (; ~5) when Ctrl+PgUp/Dn when no other tabs present

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gnome-terminal (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/894665

Title:
  Characters in terminal (;~5) when Ctrl+PgUp/Dn when no other tabs
  present

Status in “gnome-terminal” package in Ubuntu:
  Confirmed

Bug description:
  When you have a terminal window open with a single tab, the keys for
  switching tabs (Ctrl+PgUp/PgDn) produce characters in the terminal;
  specifically Ctrl+PgDn produces ;5~ and Ctrl+PgUp produces 5~.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: gnome-terminal 3.0.1-0ubuntu3
  ProcVersionSignature: Ubuntu 3.0.0-13.22-generic-pae 3.0.6
  Uname: Linux 3.0.0-13-generic-pae i686
  ApportVersion: 1.23-0ubuntu3
  Architecture: i386
  Date: Fri Nov 25 09:42:59 2011
  ExecutablePath: /usr/bin/gnome-terminal
  InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)
  ProcEnviron:
   LANGUAGE=en_ZA:en
   PATH=(custom, no user)
   LANG=en_ZA.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-terminal
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/894665/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

you have to perform pin fixup for the speaker node 0x1f from [Jack] Line
Out at Int to

Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE


by early patching or hda-jack-retask

http://git.alsa-project.org/?p=alsa-
tools.git;a=blob;f=hdajackretask/README;hb=HEAD

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Won't Fix

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

  00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge 
[K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d800-d8ff
Prefetchable memory behind bridge: c000-cfff
Capabilities: access denied
Kernel modules: shpchp

  00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge 
Controller (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

[Desktop-packages] [Bug 1161523] Re: [PORTEGE M500, Analog Devices AD1981, Speaker, Internal] No sound at all

https://wiki.ubuntu.com/Audio/AlsaInfo‎

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1161523

Title:
  [PORTEGE M500, Analog Devices AD1981, Speaker, Internal] No sound at
  all

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  There is no sound output from my laptop speakers... however, when
  using headphones the volume is very very low, almost inaudible.

  I have checked the volume levels with alsamixer and they are all set
  to the maximum level. What can I do?

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.5.0-26.42~precise1-generic 3.5.7.6
  Uname: Linux 3.5.0-26-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25.
  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  vina   1886 F pulseaudio
vina   5501 F alsamixer
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0x6408 irq 43'
 Mixer name : 'Analog Devices AD1981'
 Components : 'HDA:11d41981,11790311,00100200 
HDA:11c13026,11790001,00100700'
 Controls  : 35
 Simple ctrls  : 21
  Date: Thu Mar 28 13:11:38 2013
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release i386 
(20130213)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel failed
  Symptom_Card: Built-in Audio - HDA Intel
  Symptom_DevicesInUse:
   953  1886  5501   953   953  Slmodemd  F slmodemd
vina  F pulseaudio
vina  F alsamixer
   /dev/snd/pcmC0D6c:   Slmodemd  F...m slmodemd
   /dev/snd/pcmC0D6p:   Slmodemd  F...m slmodemd
  Symptom_Jack: Speaker, Internal
  Symptom_Type: No sound at all
  Title: [PORTEGE M500, Analog Devices AD1981, Speaker, Internal] No sound at 
all
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserAsoundrc:
   
  UserAsoundrcAsoundconf:
   
  dmi.bios.date: 08/24/2006
  dmi.bios.vendor: TOSHIBA
  dmi.bios.version: Version 1.40
  dmi.board.name: Portable PC
  dmi.board.vendor: TOSHIBA
  dmi.board.version: Version A0
  dmi.chassis.asset.tag: 00
  dmi.chassis.type: 10
  dmi.chassis.vendor: TOSHIBA
  dmi.chassis.version: Version 1.0
  dmi.modalias: 
dmi:bvnTOSHIBA:bvrVersion1.40:bd08/24/2006:svnTOSHIBA:pnPORTEGEM500:pvrPPM50Z-05W01X:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0:
  dmi.product.name: PORTEGE M500
  dmi.product.version: PPM50Z-05W01X
  dmi.sys.vendor: TOSHIBA
  mtime.conffile..etc.modprobe.d.alsa.base.conf: 2013-03-28T13:08:15.532810

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1161523/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1199015] Re: LibreOffice Impress: Window is moving under the top Unity panel

2013-09-16 Thread Ritesh Khadgaray

** Package changed: libreoffice (Ubuntu) = compiz (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1199015

Title:
  LibreOffice Impress: Window is moving under the top Unity panel

Status in “compiz” package in Ubuntu:
  New

Bug description:
  In LibreOffice Impress if you are trying to insert an animated image
  the opening dialog box is moved under the top panel. This Issue is
  reproducable with 12.04 LibreOffice as well as LibreOffice 4.0.4 from
  the PPA

  Steps to reproduce:

  1. Remove libreoffice settings
  rm -rf ~/.config/libreoffice
  2. open libreoffice impress
  3. Select Insert-Animated Gif.

  Result: Window behind the top Unity Panel
  Expected: to open below the Unity Panel or to be added to the docked.

  Workaround:
  Repeat steps 1,2,3 and press ctrl+shift+f10 the window will be docked.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1199015/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1218890]

2013-09-16 Thread Tomáš Chvátal

This will be fixed in next release. Yay :-)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1218890

Title:
  eps import fails, graphics filter not found

Status in LibreOffice Productivity Suite:
  Confirmed
Status in “libreoffice” package in Ubuntu:
  In Progress
Status in “libreoffice” package in Gentoo Linux:
  Fix Released
Status in “libreoffice” package in openSUSE:
  Won't Fix

Bug description:
  This bug showed up since 4.1.0.
  I just upgraded to 4.1.1, and its still there.

  $ lsb_release -rd
  Description:Ubuntu 12.04.3 LTS
  Release:12.04

  $ apt-cache policy libreoffice
  libreoffice:
    Installed: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2
    Candidate: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2
    Version table:
   *** 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 0
  500 http://ppa.launchpad.net/libreoffice/libreoffice-4-1/ubuntu/ 
precise/main i386 Packages
  100 /var/lib/dpkg/status

  There is also an Upstream Bug:
  https://bugs.freedesktop.org/show_bug.cgi?id=67602

  But this is clearly an Ubuntu Building/Packaging problem, packages
  from www.libreoffice.org don't show the bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/df-libreoffice/+bug/1218890/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1089782] Re: utf-8 mode persists over reset, conflicts with UI

2013-09-16 Thread Erno Kuusela

Still happens in 13.10 beta.

** Tags added: saucy

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1089782

Title:
  utf-8 mode persists over reset, conflicts with UI

Status in “gnome-terminal” package in Ubuntu:
  New

Bug description:
  Hello,

  When I manually select ISO-8859-1 charset, the escape sequence to select 
UTF-8 mode (ESC % G) will throw off
  the gnome-terminal character set in the following ways:

  1) theUTF-8 mode persists even over a reset (tput reset or manually
  echoing ESC c).

  2) the UI still erroneously shows that 8859-1 is selected in the menu,
  even though the terminal has reverted to UTF-8.

  It took me a while to track down why my terminal stopped working when the 
other end upgraded to a CentOS version
  that for some reason started sending out the UTF-8 mode select sequence in 
screen init with TERM=xterm,
  since I trusted the terminal reset and gnome-terminal UI about the charset...

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-terminal 3.4.1.1-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
  Uname: Linux 3.2.0-34-generic x86_64
  ApportVersion: 2.0.1-0ubuntu15
  Architecture: amd64
  Date: Thu Dec 13 08:37:00 2012
  InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007)
  MarkForUpload: True
  SourcePackage: gnome-terminal
  UpgradeStatus: Upgraded to precise on 2012-07-24 (141 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1089782/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1218890] Re: eps import fails, graphics filter not found

** Changed in: libreoffice (Gentoo Linux)
   Status: New = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1218890

Title:
  eps import fails, graphics filter not found

Status in LibreOffice Productivity Suite:
  Confirmed
Status in “libreoffice” package in Ubuntu:
  In Progress
Status in “libreoffice” package in Gentoo Linux:
  Fix Released
Status in “libreoffice” package in openSUSE:
  Won't Fix

Bug description:
  This bug showed up since 4.1.0.
  I just upgraded to 4.1.1, and its still there.

  $ lsb_release -rd
  Description:Ubuntu 12.04.3 LTS
  Release:12.04

  $ apt-cache policy libreoffice
  libreoffice:
    Installed: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2
    Candidate: 1:4.1.1~rc2-1ubuntu1~precise1~ppa2
    Version table:
   *** 1:4.1.1~rc2-1ubuntu1~precise1~ppa2 0
  500 http://ppa.launchpad.net/libreoffice/libreoffice-4-1/ubuntu/ 
precise/main i386 Packages
  100 /var/lib/dpkg/status

  There is also an Upstream Bug:
  https://bugs.freedesktop.org/show_bug.cgi?id=67602

  But this is clearly an Ubuntu Building/Packaging problem, packages
  from www.libreoffice.org don't show the bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/df-libreoffice/+bug/1218890/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1162564] Re: Xorg crashed with SIGSEGV in DoMakeCurrent() when chrome loading images

2013-09-16 Thread Koluch

Debian testing
nvidia proprietary driver version:325.15 ( beta )
chromium-browser version: 28.0.1500.95-3
xserver-xorg Version: 1:7.7+3

X goes down when I open certain URLs in chromium.

#0  0x in ?? ()
No symbol table info available.
#1  0x7fc53175a898 in DoMakeCurrent (cl=0x7fc53703e4f8, drawId=0,
readId=optimized out, contextId=optimized out, tag=optimized out)
at ../../glx/glxcmds.c:614
client = 0x7fc53703e3c0
reply = {type = 240 '\360', unused = 138 '\212',
  sequenceNumber = 13948, length = 32709, contextTag = 914134400,
  pad2 = 32709, pad3 = 892912872, pad4 = 32709, pad5 = 889116708,
  pad6 = 32709}
glxc = 0x0
prevglxc = optimized out
drawPriv = 0x0
readPriv = 0x0
error = 0
mask = optimized out
__PRETTY_FUNCTION__ = DoMakeCurrent
#2  0x7fc53175e3c4 in __glXDispatch (client=optimized out)
at ../../glx/glxext.c:568
rendering = 0 '\000'
stuff = 0x7fc537040d20
opcode = 26 '\032'
proc = optimized out
retval = optimized out
#3  0x7fc534fe91c1 in Dispatch () at ../../dix/dispatch.c:428
clientReady = 0x7fc536952160
result = optimized out
client = 0x7fc53703e3c0
nready = 0
icheck = 0x7fc535390130 checkForInput
start_tick = 120
#4  0x7fc534fd8e35 in main (argc=8, argv=0x7fffa3bf0dc8,
envp=optimized out) at ../../dix/main.c:288
i = optimized out
alwaysCheckForInput = {0, 1}
(gdb)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1162564

Title:
  Xorg crashed with SIGSEGV in DoMakeCurrent() when chrome loading
  images

Status in “xorg-server” package in Ubuntu:
  Triaged

Bug description:
  When i load pages from internet the system exit from graphical mode
  for few seconds and close all applications

  #7  OsSigHandler (signo=11, sip=optimized out, unused=optimized out) at 
../../os/osinit.c:107
  #8  signal handler called
  #9  0x in ?? ()
  #10 0x7f09da85a050 in DoMakeCurrent (cl=0x7f09dedb8b10, drawId=0, 
readId=optimized out, contextId=optimized out, tag=optimized out) at 
../../glx/glxcmds.c:627
  client = 0x7f09dedb89f0
  reply = {type = 176 '\260', unused = 16 '\020', sequenceNumber = 
56957, length = 32521, contextTag = 3732735488, pad2 = 32521, pad3 = 
3725079752, pad4 = 32521, pad5 = 3721045252, pad6 = 32521}
  glxc = 0x0
  drawPriv = 0x0
  readPriv = 0x0
  __PRETTY_FUNCTION__ = DoMakeCurrent
  #11 0x7f09da85e403 in __glXDispatch (client=optimized out) at 
../../glx/glxext.c:581
  rendering = 0 '\000'
  stuff = 0x7f09dedb5c80
  opcode = 26 '\032'
  cl = 0x7f09dedb8b10

  /*
   ** Make the previous context not current.
   */
  if (!(*prevglxc-loseCurrent) (prevglxc)) {  /* Line 627 */
  return __glXError(GLXBadContext);
  }

  
  ProblemType: Crash
  DistroRelease: Ubuntu 13.04
  Package: xserver-xorg-core 2:1.13.3-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-15.25-generic 3.8.4
  Uname: Linux 3.8.0-15-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.9.2-0ubuntu5
  Architecture: amd64
  CrashCounter: 1
  Date: Sun Mar 31 12:28:23 2013
  ExecutablePath: /usr/bin/Xorg
  InstallationDate: Installed on 2013-03-20 (10 days ago)
  InstallationMedia: Lubuntu 13.04 Raring Ringtail - Alpha amd64 (20130311.1)
  MarkForUpload: True
  ProcCmdline: /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp 
vt7 -novtswitch -background none
  ProcEnviron:

  Signal: 6
  SourcePackage: xorg-server
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1162564/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1162564] Re: Xorg crashed with SIGSEGV in DoMakeCurrent() when chrome loading images

2013-09-16 Thread Koluch

Please note that rolling back to stable NVidia driver 319.49 solved the
issue.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1162564

Title:
  Xorg crashed with SIGSEGV in DoMakeCurrent() when chrome loading
  images

Status in “xorg-server” package in Ubuntu:
  Triaged

Bug description:
  When i load pages from internet the system exit from graphical mode
  for few seconds and close all applications

  #7  OsSigHandler (signo=11, sip=optimized out, unused=optimized out) at 
../../os/osinit.c:107
  #8  signal handler called
  #9  0x in ?? ()
  #10 0x7f09da85a050 in DoMakeCurrent (cl=0x7f09dedb8b10, drawId=0, 
readId=optimized out, contextId=optimized out, tag=optimized out) at 
../../glx/glxcmds.c:627
  client = 0x7f09dedb89f0
  reply = {type = 176 '\260', unused = 16 '\020', sequenceNumber = 
56957, length = 32521, contextTag = 3732735488, pad2 = 32521, pad3 = 
3725079752, pad4 = 32521, pad5 = 3721045252, pad6 = 32521}
  glxc = 0x0
  drawPriv = 0x0
  readPriv = 0x0
  __PRETTY_FUNCTION__ = DoMakeCurrent
  #11 0x7f09da85e403 in __glXDispatch (client=optimized out) at 
../../glx/glxext.c:581
  rendering = 0 '\000'
  stuff = 0x7f09dedb5c80
  opcode = 26 '\032'
  cl = 0x7f09dedb8b10

  /*
   ** Make the previous context not current.
   */
  if (!(*prevglxc-loseCurrent) (prevglxc)) {  /* Line 627 */
  return __glXError(GLXBadContext);
  }

  
  ProblemType: Crash
  DistroRelease: Ubuntu 13.04
  Package: xserver-xorg-core 2:1.13.3-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-15.25-generic 3.8.4
  Uname: Linux 3.8.0-15-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.9.2-0ubuntu5
  Architecture: amd64
  CrashCounter: 1
  Date: Sun Mar 31 12:28:23 2013
  ExecutablePath: /usr/bin/Xorg
  InstallationDate: Installed on 2013-03-20 (10 days ago)
  InstallationMedia: Lubuntu 13.04 Raring Ringtail - Alpha amd64 (20130311.1)
  MarkForUpload: True
  ProcCmdline: /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp 
vt7 -novtswitch -background none
  ProcEnviron:

  Signal: 6
  SourcePackage: xorg-server
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1162564/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1223687] Re: Sync texlive-base 2013.20130905-1 (main) from Debian unstable (main)

Is this needed for Saucy, or can this wait until next cycle? We are now
post FeatureFreeze. Ditto the rest of texlive-* sync requests from you.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to texlive-base in Ubuntu.
https://bugs.launchpad.net/bugs/1223687

Title:
  Sync texlive-base 2013.20130905-1 (main) from Debian unstable (main)

Status in “texlive-base” package in Ubuntu:
  New

Bug description:
  Please sync texlive-base 2013.20130905-1 (main) from Debian unstable
  (main)

  Changelog entries since current saucy version 2013.20130722-1:

  texlive-base (2013.20130905-1) unstable; urgency=low

* new upstream checkout
  - don't ship strange duplicates of Nimbus Sans (Closes: #690125)
* remove /etc/texmf/dvipdfm/config/config (Closes: #713797)
* do not ship marvosym.ttf via dependency (Closes: #721716)
* bump standards version to 3.9.4, no changes necessary
* fix man section of updmap.cfg man page
* fix man page of mptopdf
* stop shipping TeX Gyre Math fonts, they are in tex-gyre package

   -- Norbert Preining prein...@debian.org  Thu, 05 Sep 2013 11:46:27
  +0900

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/texlive-base/+bug/1223687/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1223687] Re: Sync texlive-base 2013.20130905-1 (main) from Debian unstable (main)

** Changed in: texlive-base (Ubuntu)
   Status: New = Incomplete

** Changed in: texlive-base (Ubuntu)
 Assignee: (unassigned) = Dmitrijs Ledkovs (xnox)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to texlive-base in Ubuntu.
https://bugs.launchpad.net/bugs/1223687

Title:
  Sync texlive-base 2013.20130905-1 (main) from Debian unstable (main)

Status in “texlive-base” package in Ubuntu:
  Incomplete

Bug description:
  Please sync texlive-base 2013.20130905-1 (main) from Debian unstable
  (main)

  Changelog entries since current saucy version 2013.20130722-1:

  texlive-base (2013.20130905-1) unstable; urgency=low

* new upstream checkout
  - don't ship strange duplicates of Nimbus Sans (Closes: #690125)
* remove /etc/texmf/dvipdfm/config/config (Closes: #713797)
* do not ship marvosym.ttf via dependency (Closes: #721716)
* bump standards version to 3.9.4, no changes necessary
* fix man section of updmap.cfg man page
* fix man page of mptopdf
* stop shipping TeX Gyre Math fonts, they are in tex-gyre package

   -- Norbert Preining prein...@debian.org  Thu, 05 Sep 2013 11:46:27
  +0900

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/texlive-base/+bug/1223687/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1223688] Re: Sync texlive-lang 2013.20130905-1 (main) from Debian unstable (main)

Is this needed for Saucy, or can this wait until next cycle? We are now
post FeatureFreeze. Ditto the rest of texlive-* sync requests from you.

** Changed in: texlive-lang (Ubuntu)
   Status: New = Incomplete

** Changed in: texlive-lang (Ubuntu)
 Assignee: (unassigned) = Dmitrijs Ledkovs (xnox)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to texlive-lang in Ubuntu.
https://bugs.launchpad.net/bugs/1223688

Title:
  Sync texlive-lang 2013.20130905-1 (main) from Debian unstable (main)

Status in “texlive-lang” package in Ubuntu:
  Incomplete

Bug description:
  Please sync texlive-lang 2013.20130905-1 (main) from Debian unstable
  (main)

  Changelog entries since current saucy version 2013.20130722-1:

  texlive-lang (2013.20130905-1) unstable; urgency=low

* new upstream checkout
* provide a bunch of transitional packages to easy update from
  stable (Closes: #721838)
* bump standards version to 3.9.4, no changes necessary

   -- Norbert Preining prein...@debian.org  Thu, 05 Sep 2013 11:47:05
  +0900

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/texlive-lang/+bug/1223688/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1223689] Re: Sync texlive-extra 2013.20130905-1 (main) from Debian unstable (main)

** Changed in: texlive-extra (Ubuntu)
   Status: New = Incomplete

** Changed in: texlive-extra (Ubuntu)
 Assignee: (unassigned) = Dmitrijs Ledkovs (xnox)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to texlive-extra in Ubuntu.
https://bugs.launchpad.net/bugs/1223689

Title:
  Sync texlive-extra 2013.20130905-1 (main) from Debian unstable (main)

Status in “texlive-extra” package in Ubuntu:
  Incomplete

Bug description:
  Please sync texlive-extra 2013.20130905-1 (main) from Debian unstable
  (main)

  Changelog entries since current saucy version 2013.20130722-1:

  texlive-extra (2013.20130905-1) unstable; urgency=low

* new upstream checkout
  - fix siunitx typo (Closes: #719871)
* add a latexdef - texdef link (Closes: #719427)
* texlive-pictures suggests texlive-latex-extra (Closes: #705951, #683567)
* texlive-pcitures suggest libtcltk-ruby (Closes: #600375)
* bump standards version to 3.9.4, no changes necessary
* fonts-font-awesome instead of shipping the font

   -- Norbert Preining prein...@debian.org  Thu, 05 Sep 2013 11:46:54
  +0900

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/texlive-extra/+bug/1223689/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1065979] Re: external/internal monitors mirrored on boot when laptop lid is closed

2013-09-16 Thread Ritesh Khadgaray

** Description changed:

+ [Impact]
+ 
+  * Booting laptop in docking station with lid closed results in low 
resolution (1024x768/aka clone mode) on external monitor
+  * Low resolution desktop (1024x768) when user logs in, must be manually set 
to optimal resolution for external montior
+  * non-technical users would find the default behaviour not the desired 
behaviour.
+ 
+ [Test Case]
+ Steps to Reproduce:
+   1. Connect an external monitor to laptop.
+   2. Boot system with lid closed with a clean new user
+   3. Login screen is shown at 1024x768 ( the highest common resolution 
supported by both the displays)
+ 
+  The laptop display ( say 1366x768)  should have a lower resolution than
+ the connected external monitor ( say 1920x1080 ) .
+ 
+ 
+ [Regression Potential]
+  * I dont see any regression potential here, as this does not change any 
default behaviour.
+  * User must manually activate this new behaviour . 
+ 
+ [Other Info]
+  * test packages have been posted to - 
http://people.canonical.com/~ritesh/work/gsd/
+  * Update to this, and update default to follow-lid
+  $ gsettings set org.gnome.settings-daemon.plugins.xrandr \
+default-monitors-setup follow-lid
+  * test as usual
+ 
+ 
-
+ 
  If I put my X220 in a dock, and plug in an external monitor. Then I
  close the lid and turn on the computer, the computer will boot up with
  both the internal laptop screen and external monitor on and mirror.
  Because I can't see the laptop screen, I would expect the external
  monitor to be only on at its maximum resolution. I've actually tried
  this without the dock by plugging in an external monitor to my laptop
  and shutting the lid during boot quickly, the same problem persists.
  This problem is exhibited on Precise/Oneiric as well as Quantal.
  
- In particular this specification mentions this behavior: 
+ In particular this specification mentions this behavior:
  https://wiki.ubuntu.com/X/Blueprints/MultiMonitor
  In this user story:
  Alan goes to the office, puts his laptop with the lid closed into a 
docking station and boots it up. The external display should be run at its 
native resolution. Later that day he needs to see a customer. He suspends the 
laptop and takes it out of the docking station. At the customer he wakes up the 
laptop and the internal screen is used at its native resolution. Finishing his 
visit the laptop is suspended, brought back to the office. There it is placed 
in the docking station, woken up and the external display should run again at 
its native resolution.
- 
- ProblemType: Bug
- DistroRelease: Ubuntu 12.10
- Package: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
- ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
- Uname: Linux 3.5.0-17-generic x86_64
- .tmp.unity.support.test.0:
- 
- ApportVersion: 2.6.1-0ubuntu3
- Architecture: amd64
- CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
- CompositorRunning: compiz
- Date: Fri Oct 12 08:16:04 2012
- DistUpgraded: Fresh install
- DistroCodename: quantal
- DistroVariant: ubuntu
- ExtraDebuggingInterest: Yes, including running git bisection searches
- GraphicsCard:
-  Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
-    Subsystem: Lenovo Device [17aa:21da]
- InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20121001)
- MachineType: LENOVO 42872WU
- ProcEnviron:
-  TERM=xterm
-  PATH=(custom, no user)
-  XDG_RUNTIME_DIR=set
-  LANG=en_US.UTF-8
-  SHELL=/bin/bash
- ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic 
root=UUID=aeedfe74-da24-46f5-837e-ec386440a8c8 ro quiet splash vt.handoff=7
- SourcePackage: xserver-xorg-video-intel
- UpgradeStatus: No upgrade log present (probably fresh install)
- dmi.bios.date: 11/01/2011
- dmi.bios.vendor: LENOVO
- dmi.bios.version: 8DET55WW (1.25 )
- dmi.board.asset.tag: Not Available
- dmi.board.name: 42872WU
- dmi.board.vendor: LENOVO
- dmi.board.version: Not Available
- dmi.chassis.asset.tag: No Asset Information
- dmi.chassis.type: 10
- dmi.chassis.vendor: LENOVO
- dmi.chassis.version: Not Available
- dmi.modalias: 
dmi:bvnLENOVO:bvr8DET55WW(1.25):bd11/01/2011:svnLENOVO:pn42872WU:pvrThinkPadX220:rvnLENOVO:rn42872WU:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
- dmi.product.name: 42872WU
- dmi.product.version: ThinkPad X220
- dmi.sys.vendor: LENOVO
- version.compiz: compiz 1:0.9.8.4-0ubuntu2
- version.ia32-libs: ia32-libs N/A
- version.libdrm2: libdrm2 2.4.39-0ubuntu1
- version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
- version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
- version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
- version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
- version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
-

[Desktop-packages] [Bug 1219753] Re: Dell XPS 12 2013 Haswell synaptics trackpad not recognized anymore in Ubuntu kernel 3.10 and 3.11

2013-09-16 Thread Wouter van der Graaf

I suspect this is a kernel bug, because switching back to older 3.8
kernel makes my trackpad correctly recognized in
/proc/bus/input/devices.

** Summary changed:

- Dell XPS 12 2013 Haswell synaptics trackpad not recognized anymore in Ubuntu 
kernel 3.10 and 3.11rc
+ Dell XPS 12 2013 Haswell synaptics trackpad not recognized anymore in Ubuntu 
kernel 3.10 and 3.11

** Package changed: xserver-xorg-input-synaptics (Ubuntu) = linux
(Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu.
https://bugs.launchpad.net/bugs/1219753

Title:
  Dell XPS 12 2013 Haswell synaptics trackpad not recognized anymore in
  Ubuntu kernel 3.10 and 3.11

Status in “linux” package in Ubuntu:
  New

Bug description:
  First I installed stock Ubuntu 13.04 Raring Ringtail with kernel 3.8.
  Trackpad was functioning correctly (e.g. two-finger scrolling worked)
  and was recognized as Synaptics device in /proc/bus/input/devices.

  Due to very new Intel wireless 7260 hardware that did not work in
  kernel 3.8, I dist-upgraded to 13.10 Saucy Salamander with kernel
  3.11. With this kernel my Synaptics trackpad is no longer recognized
  as Synaptics and works as default evdev pointer (mouse) device,
  without all the trackpad features.

  This bug report was done with kernel 3.11rc7, but applies also to
  kernel 3.10 and the latest saucy kernel 3.11 to which I'm upgraded by
  software updater.

  Instead of Synaptics, devices lists it as below:

  I: Bus=0018 Vendor=06cb Product=2734 Version=0100
  N: Name=DLL05E3:01 06CB:2734
  P: Phys=
  S: Sysfs=/devices/pci:00/INT33C3:00/i2c-8/8-002c/input/input11
  U: Uniq=
  H: Handlers=mouse0 event11
  B: PROP=0
  B: EV=17
  B: KEY=3 0 0 0 0
  B: REL=3
  B: MSC=10

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: xserver-xorg-input-synaptics 1.7.1-0ubuntu1
  Uname: Linux 3.11.0-031100rc7-generic x86_64
  ApportVersion: 2.12.1-0ubuntu3
  Architecture: amd64
  Date: Mon Sep  2 11:52:16 2013
  DistUpgraded: 2013-09-01 22:21:35,082 DEBUG enabling apt cron job
  DistroCodename: saucy
  DistroVariant: ubuntu
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2013-08-09 (23 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: Dell Inc. XPS 12-9Q33
  MarkForUpload: True
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-031100rc7-generic 
root=UUID=8e4879ce-4777-4c48-b6d7-5b3b4b116ad3 ro quiet splash vt.handoff=7
  SourcePackage: xserver-xorg-input-synaptics
  UpgradeStatus: Upgraded to saucy on 2013-09-01 (0 days ago)
  dmi.bios.date: 06/20/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A01
  dmi.board.name: XPS 12-9Q33
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: Not Specified
  dmi.modalias: 
dmi:bvnDellInc.:bvrA01:bd06/20/2013:svnDellInc.:pnXPS12-9Q33:pvrA01:rvnDellInc.:rnXPS12-9Q33:rvrA01:cvnDellInc.:ct8:cvrNotSpecified:
  dmi.product.name: XPS 12-9Q33
  dmi.product.version: A01
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz 1:0.9.10+13.10.20130828.2-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.46-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.2-1ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.2-1ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.14.2.901-2ubuntu4
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu3
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.14-4ubuntu3
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.9-2ubuntu1
  xserver.bootTime: Mon Sep  2 11:22:49 2013
  xserver.errors:

  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id1021
   vendor LGD
  xserver.version: 2:1.14.2.901-2ubuntu4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1219753/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1100190] Re: I/O Error while opening file from WebDAV over GVFS from Nautilus

2013-09-16 Thread Santiago Gala

Note: I am seeing the same bug, but in a slightly different setup:

* Ubuntu 13.04 up to date
* The server is jackrabbit stable
* If I mount it from nautilus with connect to server it fails most I/O
operations with I/O Error, including things like 'ls -l', as stat of each
node fails.
* If I mount it as sudo mkdir /media/jackrepo; sudo mount -t davfs
'http://localhost:8080/repository/default' /media/jackrepo is works like a
charm, including stat (ls -l) or opening fragments of a video

So I don't think the bug is at Libreoffice, but at the gvfs layer
instead

--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1100190

Title:
I/O Error while opening file from WebDAV over GVFS from Nautilus

Status in LibreOffice Productivity Suite:
Confirmed
Status in “libreoffice” package in Ubuntu:
Confirmed

Bug description:
Problem description:
Error when opening a file from Nautilus with LibreOffice when the file is
WebDAV mounted with GVFS.

The Same file can be opened from the same location from within
LibreOffice, with the Open File Dialogue. Then you get asked for the
Username and Password and Libreoffice seems to access the file
directly over HTTP.

Steps to reproduce:
1. Mount a DAV Folder with Nautilus.
URL in my Case:
dav://admin@10.1.10.58:8080/alfresco/webdav/Sites/puzzletest/documentLibrary/Alfresco%20WebDAV%20Test/
2. Open a file with LibreOffice by doubleclick or context menu from Nautilus.
4. Error occurs.
Exact message:
(-) «General input/output error while accessing /home/pgassmann/.gvfs/WebDAV\
als\ admin\ auf\ 10.1.10.58%3A8080/Sites/puzzletest/documentLibrary/Alfresco\
WebDAV\ Test/Neu.odt.» [OK]

Working Variant:
1. = 1. above
2. Start LibreOffice
3. Open File dialogue from LibreOffice
4. Select the same file and click Open.
5. LibreOffice Dialogue: Authentication Required, Enter user name and
password for: Alfresco DAV Server on 10.1.10.58
6. Enter Username and password, click OK
7. File opens correctly

LibreOffice Version:
3.5.2-2ubuntu1

Involved Software:
LibreOffice, Nautilus, GVFS, Alfresco

Current behavior:
Opening file from Nautilus causes Error,
Opening from LibreOffice Open File dialogue asks for credentials and works
correctly

Expected behavior:
Opening from Nautilus works.
Opening from Open File dialog works without asking for credentials.

Attachment: strace log from following actions:
LANG=C libreoffice --strace
successfully Open File from LibreOffice dialogue.
Trying to open file from Nautilus.

ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: libreoffice 1:3.5.4-0ubuntu1.1
ProcVersionSignature: Ubuntu 3.2.0-36.57-generic 3.2.35
Uname: Linux 3.2.0-36-generic x86_64
NonfreeKernelModules: nvidia wl
ApportVersion: 2.0.1-0ubuntu17.1
Architecture: amd64
Date: Wed Jan 16 10:05:05 2013
InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007)
MarkForUpload: True
SourcePackage: libreoffice
UpgradeStatus: Upgraded to precise on 2012-05-22 (238 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/df-libreoffice/+bug/1100190/+subscriptions

--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

2013-09-16 Thread Alex Santos

As an FYI (if helpful)

I have tried a new 'test' standard user account but the issue persists.

I have also booted from 12.04.3 live cd.
1) From the live CD Sound System Settings it does display in the output tab 
headphones and speakers. Considering this, I went to the Sound Effects tab in 
the Sound Settings and set the Alert volume to full and output volume to 100% 
but alert sounds are inaudible from the speaker.
2) I plugged in headphones that I know work fine on a mac and the alert sounds 
are still very low in volume.

Are there further steps I could take that might help towards reaching a
resolution?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Won't Fix

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

  00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge 
[K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d800-d8ff
Prefetchable memory behind bridge: c000-cfff
Capabilities: access denied
Kernel

[Desktop-packages] [Bug 1159452] Re: unable to print entire pdf for some files in evince

Attached is a debdiff applying the fix of the upstream bug to the
current Saucy package of Cairo in Ubuntu. Please upload this package.

** Changed in: cairo (Ubuntu)
   Status: Incomplete = In Progress

** Patch added: cairo_1.12.16-0ubuntu1_1.12.16-0ubuntu2.debdiff
   
https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1159452/+attachment/3823397/+files/cairo_1.12.16-0ubuntu1_1.12.16-0ubuntu2.debdiff

** Changed in: cairo (Ubuntu)
   Status: In Progress = Fix Committed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cairo in Ubuntu.
https://bugs.launchpad.net/bugs/1159452

Title:
  unable to print entire pdf for some files in evince

Status in libcairo  -  cairo vector graphics library:
  Fix Released
Status in “cairo” package in Ubuntu:
  Fix Committed

Bug description:
  Pdfs from the web (varying size , from 100kb to 60-80 MB), print
  absolutely fine.

  However printing of generated pdfs does not work-- only prints first 2
  pages, and then one blank page for the rest.

  If it makes any difference the pdf was exported from gummi (latex
  editor), it shows up fine in evince but prints only 2 pages.

  The printer is an hp8600 n911a

  prints all other files ok.
  
***UPDATE***
  installing okular and setting that as default fixes this problem, however
  this is a major bug as the default document viewer is evince in ubuntu
  
UPDATEEND*
  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: evince 3.4.0-0ubuntu1.6
  ProcVersionSignature: Ubuntu 3.5.0-26.42~precise1-generic 3.5.7.6
  Uname: Linux 3.5.0-26-generic x86_64
  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: amd64
  Date: Sun Mar 24 15:57:37 2013
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release amd64 
(20130214)
  MarkForUpload: True
  ProcEnviron:
   LANGUAGE=en_GB:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: evince
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/libcairo/+bug/1159452/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 968785] Re: ghostscript runs for indefinitely long period of time when called by foomatic-rip

Attached is a debdiff applying the fix of the upstream bug to the
current Saucy package of Cairo in Ubuntu. Please upload this package.

** Changed in: cairo (Ubuntu)
   Status: Incomplete = In Progress

** Patch added: cairo_1.12.16-0ubuntu1_1.12.16-0ubuntu2.debdiff
   
https://bugs.launchpad.net/ubuntu/+source/ghostscript/+bug/968785/+attachment/3823395/+files/cairo_1.12.16-0ubuntu1_1.12.16-0ubuntu2.debdiff

** Changed in: cairo (Ubuntu)
   Status: In Progress = Fix Committed

** Changed in: cairo (Ubuntu)
Milestone: None = ubuntu-13.10

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cairo in Ubuntu.
https://bugs.launchpad.net/bugs/968785

Title:
  ghostscript runs for indefinitely long period of time when called by
  foomatic-rip

Status in Cairo Graphics Library:
  Fix Released
Status in “cairo” package in Ubuntu:
  Fix Committed
Status in “ghostscript” package in Ubuntu:
  Incomplete

Bug description:
  I am printing to an HP Professional 1102.   In had no success with
  HPLIP so am using foo2zjs instead. This works very well when printing
  from Libre Office which seems submits data to the print queue as an
  octet stream. Printing from evince/chromium/firefox however seems to
  submit data to print queue as PDF, which seems to result in a call by
  foomatic-rip to gs, which for most jobs other than text with no
  graphics runs for an indefinitely long period of time whilst utilising
  100% CPU.

  I did a ps -ewf to see what options gs is being called with and was
  able to confirm that manually running ghostscript from the command
  line against more or less any PDF file I have results in the same
  condition of an indefinitely long run period. A search on google came
  up with many very similar issues but they are all very old and
  supposedly already resolved. However, I took my inspiration from these
  old problem reports and tried inserting a -dNOTRANSPARENCY into the gs
  command line and found that this causes gs to complete its processing
  in one to two seconds and the resultant postscript output which I
  suppose would normally in the next stage be passed off to foo2zjs for
  further processing seems to be OK.

  So to sum up, I can simulate the gs command from the command line,
  inserting an extra -dNOTRANSPARENCY switch and this seems to work
  around my problem with printing, but I cannot print from from any
  application other than Libre Office as I do not know how to tell
  foomatic-rip to pass this extra switch for me when it calls
  ghostscript (I guess this is hard-coded?)

  What I would like, (if my understanding is so far correct) is
  ultimately a bug fix to ghostscript, and if this going to take a long
  time then perhaps in the meantime you could supply me with a way to
  insert that extra switch into the processing of my print jobs so I
  might perhaps have a usable workaround in the meantime.

  Thank you for your time and consideration of my problem.

  *
  Other info:

  shompoe@shompoe-TOSHIBA-NB305:~$ lsb_release -rd
  Description:  Ubuntu precise (development branch)
  Release:  12.04

  
  shompoe@shompoe-TOSHIBA-NB305:~$ apt-cache policy ghostscript
  ghostscript:
Installed: 9.05~dfsg-0ubuntu3
Candidate: 9.05~dfsg-0ubuntu3
Version table:
   *** 9.05~dfsg-0ubuntu3 0
  500 http://ftp.sjtu.edu.cn/ubuntu/ precise/main amd64 Packages
  100 /var/lib/dpkg/status

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: ghostscript 9.05~dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.2.0-20.32-generic 3.2.12
  Uname: Linux 3.2.0-20-generic x86_64
  ApportVersion: 1.95-0ubuntu1
  Architecture: amd64
  Date: Fri Mar 30 08:24:42 2012
  Lpstat: device for HP-LaserJet-Pro-P1102: smb://MSHOME/REDROOM/Printer1102
  MachineType: TOSHIBA TOSHIBA NB305
  Papersize: a4
  PpdFiles: HP-LaserJet-Pro-P1102: HP LaserJet Pro P1102 Foomatic/foo2zjs-z2 
(recommended)
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-20-generic 
root=UUID=a705cec0-31d5-45f8-b7a3-f4b817016160 ro 
crashkernel=384M-2G:64M,2G-:128M apparmor=0 splash quiet vt.handoff=7
  SourcePackage: ghostscript
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/16/2010
  dmi.bios.vendor: TOSHIBA
  dmi.bios.version: V1.40
  dmi.board.name: NPVAA
  dmi.board.vendor: TOSHIBA
  dmi.board.version: 1.00
  dmi.chassis.asset.tag: *
  dmi.chassis.type: 10
  dmi.chassis.vendor: TOSHIBA
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnTOSHIBA:bvrV1.40:bd03/16/2010:svnTOSHIBA:pnTOSHIBANB305:pvrPLL3AL-001012:rvnTOSHIBA:rnNPVAA:rvr1.00:cvnTOSHIBA:ct10:cvrN/A:
  dmi.product.name: TOSHIBA NB305
  dmi.product.version: PLL3AL-001012
  dmi.sys.vendor: TOSHIBA

To manage notifications about this bug go to:
https://bugs.launchpad.net/cairo/+bug/968785/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net

[Desktop-packages] [Bug 1225919] Re: Memory leak

2013-09-16 Thread dino99

details : mahjongg.log.tar.gz

** Attachment added: mahjongg.log.tar.gz
   
https://bugs.launchpad.net/ubuntu/+source/gnome-mahjongg/+bug/1225919/+attachment/3823410/+files/mahjongg.log.tar.gz

** Bug watch added: GNOME Bug Tracker #708147
   https://bugzilla.gnome.org/show_bug.cgi?id=708147

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-mahjongg in Ubuntu.
https://bugs.launchpad.net/bugs/1225919

Title:
  Memory leak

Status in “gnome-mahjongg” package in Ubuntu:
  New

Bug description:
  I'm logged with gnome-shell, and often get gnome-mahjongg using high
  cpu resources on that system having 4 cores.  Sometimes i need to kill
  the gnome-mahjongg process to get back a normal cpu/cores usage (even
  when gnome-mahjongg is loaded but not played).

  This has already been reported by Debian: http://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=712815

  on my system , running valgrind, i get:

  oem@oem-desktop:~$ valgrind gnome-mahjongg G_SLICE=always-malloc 
G_DEBUG=gc-friendly  
  ==8889== Memcheck, a memory error detector
  ==8889== Copyright (C) 2002-2012, and GNU GPL'd, by Julian Seward et al.
  ==8889== Using Valgrind-3.8.1 and LibVEX; rerun with -h for copyright info
  ==8889== Command: gnome-mahjongg G_SLICE=always-malloc G_DEBUG=gc-friendly
  ==8889== 
  ==8889== 
  ==8889== HEAP SUMMARY:
  ==8889== in use at exit: 788,388 bytes in 15,481 blocks
  ==8889==   total heap usage: 106,660 allocs, 91,179 frees, 3,855,258 bytes 
allocated
  ==8889== 
  ==8889== LEAK SUMMARY:
  ==8889==definitely lost: 280 bytes in 14 blocks
  ==8889==indirectly lost: 45 bytes in 6 blocks
  ==8889==  possibly lost: 16,936 bytes in 525 blocks
  ==8889==still reachable: 729,411 bytes in 14,434 blocks
  ==8889== suppressed: 0 bytes in 0 blocks
  ==8889== Rerun with --leak-check=full to see details of leaked memory
  ==8889== 
  ==8889== For counts of detected and suppressed errors, rerun with: -v
  ==8889== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
  oem@oem-desktop:~$

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: gnome-mahjongg 1:3.8.0-1
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Uname: Linux 3.11.0-7-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: i386
  Date: Mon Sep 16 10:55:05 2013
  MarkForUpload: True
  SourcePackage: gnome-mahjongg
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-mahjongg/+bug/1225919/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225919] Re: Memory leak

2013-09-16 Thread dino99

reported upstream:  https://bugzilla.gnome.org/show_bug.cgi?id=708147

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-mahjongg in Ubuntu.
https://bugs.launchpad.net/bugs/1225919

Title:
  Memory leak

Status in “gnome-mahjongg” package in Ubuntu:
  New

Bug description:
  I'm logged with gnome-shell, and often get gnome-mahjongg using high
  cpu resources on that system having 4 cores.  Sometimes i need to kill
  the gnome-mahjongg process to get back a normal cpu/cores usage (even
  when gnome-mahjongg is loaded but not played).

  This has already been reported by Debian: http://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=712815

  on my system , running valgrind, i get:

  oem@oem-desktop:~$ valgrind gnome-mahjongg G_SLICE=always-malloc 
G_DEBUG=gc-friendly  
  ==8889== Memcheck, a memory error detector
  ==8889== Copyright (C) 2002-2012, and GNU GPL'd, by Julian Seward et al.
  ==8889== Using Valgrind-3.8.1 and LibVEX; rerun with -h for copyright info
  ==8889== Command: gnome-mahjongg G_SLICE=always-malloc G_DEBUG=gc-friendly
  ==8889== 
  ==8889== 
  ==8889== HEAP SUMMARY:
  ==8889== in use at exit: 788,388 bytes in 15,481 blocks
  ==8889==   total heap usage: 106,660 allocs, 91,179 frees, 3,855,258 bytes 
allocated
  ==8889== 
  ==8889== LEAK SUMMARY:
  ==8889==definitely lost: 280 bytes in 14 blocks
  ==8889==indirectly lost: 45 bytes in 6 blocks
  ==8889==  possibly lost: 16,936 bytes in 525 blocks
  ==8889==still reachable: 729,411 bytes in 14,434 blocks
  ==8889== suppressed: 0 bytes in 0 blocks
  ==8889== Rerun with --leak-check=full to see details of leaked memory
  ==8889== 
  ==8889== For counts of detected and suppressed errors, rerun with: -v
  ==8889== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
  oem@oem-desktop:~$

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: gnome-mahjongg 1:3.8.0-1
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Uname: Linux 3.11.0-7-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: i386
  Date: Mon Sep 16 10:55:05 2013
  MarkForUpload: True
  SourcePackage: gnome-mahjongg
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-mahjongg/+bug/1225919/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 993981] Re: Remmina Fails to Load rdp Plugin (remmina-plugin-rdp.so)

2013-09-16 Thread Marco Ciampa

Here ubuntu 13.04 amd64

#14 enlighted me.

doing a

dpkg -l | grep freerdp

apt-get purge ...

disabled remmina ppa

apt-get update; apt-get install remmina

resolved. Thanks!

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to remmina in Ubuntu.
https://bugs.launchpad.net/bugs/993981

Title:
  Remmina Fails to Load rdp Plugin (remmina-plugin-rdp.so)

Status in “remmina” package in Ubuntu:
  Confirmed

Bug description:
  The file does exist, but Remmina fails to load it:

  
  Remmina plugin VNC (type=Protocol) registered.
  Remmina plugin VNCI (type=Protocol) registered.
  Failed to load plugin: /usr/lib/remmina/plugins/remmina-plugin-rdp.so.
  Remmina plugin SFTP (type=Protocol) registered.
  Remmina plugin SSH (type=Protocol) registered.
  option parsing failed: Unknown option -h
  Plugin not found (type=0, name=RDP)
  Plugin not found (type=0, name=RDP)
  Plugin not found (type=0, name=RDP)
  Plugin not found (type=0, name=RDP)
  ...

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: remmina 1.0.0-1ubuntu6
  ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14
  Uname: Linux 3.2.0-24-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 2.0.1-0ubuntu7
  Architecture: amd64
  Date: Thu May  3 08:29:48 2012
  SourcePackage: remmina
  UpgradeStatus: Upgraded to precise on 2012-05-02 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/993981/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225622] Re: [FUJITSU AMILO La1703, VT1708, playback] No sound at all

This is the output of hda-jack-sense-test:
 Pin 0x1d (Pink Mic): present = No
  Pin 0x1f (Green Line Out): present = No
  Pin 0x20 (Green HP Out): present = No

did the result change to yes after you plug the headphone or Mic ?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225622

Title:
  [FUJITSU AMILO La1703, VT1708, playback] No sound at all

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  Description:  Ubuntu 13.04
  Release:  13.04

  The on-board soundcard appears on sound configuration page and on
  alsa-mixer, all the channels have the volume at maximum but it doesn't
  play any sound.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emil   2203 F pulseaudio
  Date: Sun Sep 15 11:45:59 2013
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2013-03-15 (183 days ago)
  InstallationMedia: Xubuntu 13.04 Raring Ringtail - Alpha amd64 (20130311.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:VT82xx failed
  Symptom_Card: VT8237A/VT8251 HDA Controller - HDA VIA VT82xx
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emil   2203 F pulseaudio
  Symptom_Type: No sound at all
  Title: [HDA-Intel - HDA VIA VT82xx, playback] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/02/2007
  dmi.bios.vendor: Phoenix
  dmi.bios.version: 8.2-0023-M007
  dmi.board.name: E25
  dmi.board.vendor: Inventec
  dmi.board.version: Rev 01
  dmi.chassis.asset.tag: User Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.chassis.version: E25_
  dmi.modalias: 
dmi:bvnPhoenix:bvr8.2-0023-M007:bd08/02/2007:svnFUJITSUSIEMENS:pnAMILOLa1703:pvr1.0:rvnInventec:rnE25:rvrRev01:cvnFUJITSUSIEMENS:ct10:cvrE25_:
  dmi.product.name: AMILO La1703
  dmi.product.version: 1.0
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1225622/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1125011] Re: screen save still active after being disabled

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gnome-control-center (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1125011

Title:
  screen save still active after being disabled

Status in “gnome-control-center” package in Ubuntu:
  Confirmed

Bug description:
  On a remote machine, no keyboard or mouse connected. Set up to auto
  login and start a browser in kiosk mode as a monitoring dash board for
  our office.

  The only way to enable this to run for the whole day is to connect a
  keyboard and break out of the screen save when it first runs. After
  that it will not go into the screen saver for the rest of the day.

  all settings  brightness  lock 
     Turn screen off when inactive  for: never

     lock : off

  all settings  power 
     suspend when inactive for : don't suspend 

  I have tried using different values for like 1 hour

  all settings  brightness  lock 
     Turn screen off when inactive  for: 1 hour

  After 10 minutes monitor goes blank, as if Turn screen off when
  inactive: 10 min is set.

  I have tried
  xset -dpms
  xset s off

  current xset after clean boot

  xset -q
  Keyboard Control:
    auto repeat:  onkey click percent:  0LED mask:  
    XKB indicators:
  00: Caps Lock:   off01: Num Lock:off02: Scroll Lock: off
  03: Compose: off04: Kana:off05: Sleep:   off
  06: Suspend: off07: Mute:off08: Misc:off
  09: Mail:off10: Charging:off11: Shift Lock:  off
  12: Group 2: off13: Mouse Keys:  off
    auto repeat delay:  500repeat rate:  33
    auto repeating keys:  00ffdbbf
  fadfffefffed
  9fff
  fff7
    bell percent:  50bell pitch:  400bell duration:  100
  Pointer Control:
    acceleration:  7/2threshold:  1
  Screen Saver:
    prefer blanking:  yesallow exposures:  yes
    timeout:  0cycle:  0
  Colors:
    default colormap:  0x20BlackPixel:  0WhitePixel:  16777215
  Font Path:
    
/usr/share/fonts/X11/misc,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,built-ins
  DPMS (Energy Star):
    Standby: 0Suspend: 0Off: 0
    DPMS is Disabled

  I end up issue the following command remotely to get the monitor back on. 
Which will only work for 10 minutes till it blacks out again.
  sudo service lightdm restart

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-control-center 1:3.4.2-0ubuntu0.8
  ProcVersionSignature: Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2
  Uname: Linux 3.5.0-23-generic i686
  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: i386
  Date: Thu Feb 14 11:20:14 2013
  InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 
(20120817.3)
  MarkForUpload: True
  SourcePackage: gnome-control-center
  UpgradeStatus: No upgrade log present (probably fresh install)
  usr_lib_gnome-control-center:
   activity-log-manager-control-center 0.9.4-0ubuntu3.2
   deja-dup22.0-0ubuntu2
   gnome-bluetooth 3.2.2-0ubuntu5
   indicator-datetime  0.3.94-0ubuntu2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1125011/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225987] [NEW] [xsettings]: gnome-settings-daemon crashed with SIGSEGV in ffi_call_unix64()

2013-09-16 Thread Perfecto

Public bug reported:

Nothing more

ProblemType: Crash
DistroRelease: Ubuntu 13.10
Package: gnome-settings-daemon 3.8.5-0ubuntu3
ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
Uname: Linux 3.11.0-7-generic x86_64
ApportVersion: 2.12.1-0ubuntu4
Architecture: amd64
Date: Mon Sep 16 12:31:49 2013
ExecutablePath: /usr/lib/gnome-settings-daemon/gnome-settings-daemon
InstallationDate: Installed on 2013-09-14 (2 days ago)
InstallationMedia: Ubuntu-GNOME 13.10 Saucy Salamander - Alpha amd64 
(20130903)
MarkForUpload: True
ProcCmdline: /usr/lib/gnome-settings-daemon/gnome-settings-daemon
ProcEnviron:
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=set
 LANG=es_ES.UTF-8
 SHELL=/bin/false
SegvAnalysis:
 Segfault happened at: 0x7f85684e6877:  movl   $0x0,0x38(%rax)
 PC (0x7f85684e6877) ok
 source $0x0 ok
 destination 0x38(%rax) (0xaae2) not located in a known VMA 
region (needed writable region)!
SegvReason: writing unknown VMA
Signal: 11
SourcePackage: gnome-settings-daemon
StacktraceTop:
 ?? () from /usr/lib/gnome-settings-daemon-3.0/libxsettings.so
 ?? () from /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
 ffi_call_unix64 () from /usr/lib/x86_64-linux-gnu/libffi.so.6
 ffi_call () from /usr/lib/x86_64-linux-gnu/libffi.so.6
 g_cclosure_marshal_generic () from 
/usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
Title: [xsettings]: gnome-settings-daemon crashed with SIGSEGV in 
ffi_call_unix64()
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:

** Affects: gnome-settings-daemon (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-crash need-amd64-retrace saucy xsettings

** Information type changed from Private to Public

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/1225987

Title:
  [xsettings]: gnome-settings-daemon crashed with SIGSEGV in
  ffi_call_unix64()

Status in “gnome-settings-daemon” package in Ubuntu:
  New

Bug description:
  Nothing more

  ProblemType: Crash
  DistroRelease: Ubuntu 13.10
  Package: gnome-settings-daemon 3.8.5-0ubuntu3
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Uname: Linux 3.11.0-7-generic x86_64
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: amd64
  Date: Mon Sep 16 12:31:49 2013
  ExecutablePath: /usr/lib/gnome-settings-daemon/gnome-settings-daemon
  InstallationDate: Installed on 2013-09-14 (2 days ago)
  InstallationMedia: Ubuntu-GNOME 13.10 Saucy Salamander - Alpha amd64 
(20130903)
  MarkForUpload: True
  ProcCmdline: /usr/lib/gnome-settings-daemon/gnome-settings-daemon
  ProcEnviron:
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=es_ES.UTF-8
   SHELL=/bin/false
  SegvAnalysis:
   Segfault happened at: 0x7f85684e6877:movl   $0x0,0x38(%rax)
   PC (0x7f85684e6877) ok
   source $0x0 ok
   destination 0x38(%rax) (0xaae2) not located in a known VMA 
region (needed writable region)!
  SegvReason: writing unknown VMA
  Signal: 11
  SourcePackage: gnome-settings-daemon
  StacktraceTop:
   ?? () from /usr/lib/gnome-settings-daemon-3.0/libxsettings.so
   ?? () from /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
   ffi_call_unix64 () from /usr/lib/x86_64-linux-gnu/libffi.so.6
   ffi_call () from /usr/lib/x86_64-linux-gnu/libffi.so.6
   g_cclosure_marshal_generic () from 
/usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
  Title: [xsettings]: gnome-settings-daemon crashed with SIGSEGV in 
ffi_call_unix64()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1225987/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

I don't think it's a pulse related problem because even though I'm a gnome user 
I don't have poulseaudio installed, it's just plain old, pure(but great) alsa. 
Also, I would like to make sure that you've noticed the text from the gentoo 
bug comment:
{
With 3.5-rc5 alsamixer shows Master [dB gain: 6.75] and PCM [dB gain: 14.00, 
14.00] for the maximum values, same as with the other non-working kernels.
Until now the only visual differences between 3.0.6 and the rest(values when 
vertical sliders are at 100):
1)3.0.6 has master front dB gain: 14.00 vs. Master [dB gain: 6.75] for 
other versions;
2)3.0.6 has PCM dB gain: 0.00 vs. PCM dB gain: 14.00 for others.

Front and Headphones dB gains are 0.00 at maximum values for all 
kernels(including 3.0.6), so I don't understand why newer kernels need a 
different than zero value for PCM.
}
where 3.0.6 is my last working kernel version and other versions are the 
ones(newer) that have a low sound volume.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Won't Fix

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

  00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge

[Desktop-packages] [Bug 1223334] Re: The vertical lines on the screen. saucy/13.10

2013-09-16 Thread inferrna

*** This bug is a duplicate of bug 1218815 ***
https://bugs.launchpad.net/bugs/1218815

** This bug has been marked a duplicate of bug 1218815
   [radeon] Graphic glitches and screen corruption (vertical lines) on XMir 
surfaces only

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1223334

Title:
  The vertical lines on the screen. saucy/13.10

Status in “xorg-server” package in Ubuntu:
  New

Bug description:
  Bug affects display, on screenshots all ok.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1223334/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1218815] Re: [radeon] Graphic glitches and screen corruption (vertical lines) on XMir surfaces only

2013-09-16 Thread inferrna

Also affects me, see bug 1223334

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu.
https://bugs.launchpad.net/bugs/1218815

Title:
  [radeon] Graphic glitches and screen corruption (vertical lines) on
  XMir surfaces only

Status in Mir:
  Triaged
Status in XMir:
  Triaged
Status in “mir” package in Ubuntu:
  Confirmed
Status in “xorg-server” package in Ubuntu:
  Triaged
Status in “xserver-xorg-video-ati” package in Ubuntu:
  Triaged

Bug description:
  Since the latest Ubuntu Mir update which enabled the bypass support I
  get heavy graphic glitches when using the unity-system-compositor. I
  had to disable it in order to use the desktop as the graphic glitches
  made it impossible to read anything.

  Before this update everything worked fine.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: xserver-xorg-xmir 2:1.14.2.901-2ubuntu4
  ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
  Uname: Linux 3.11.0-4-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.12.1-0ubuntu2
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  Date: Fri Aug 30 12:00:42 2013
  DistUpgraded: 2013-05-10 03:13:26,850 DEBUG enabling apt cron job
  DistroCodename: saucy
  DistroVariant: ubuntu
  DkmsStatus:
   bcmwl, 6.30.223.30+bdcom, 3.11.0-3-generic, x86_64: installed
   bcmwl, 6.30.223.30+bdcom, 3.11.0-4-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 
/ 6530M/6550M] [1002:68c1] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Mobility Radeon HD 5650 [1025:036e]
  InstallationDate: Installed on 2012-12-13 (260 days ago)
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: Acer TravelMate 5542G
  MarkForUpload: True
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic 
root=UUID=70d95406-69a9-4dd1-a199-efd5432bae25 ro quiet splash radeon.dpm=1 
vt.handoff=7
  SourcePackage: xorg-server
  UpgradeStatus: Upgraded to saucy on 2013-05-10 (112 days ago)
  dmi.bios.date: 07/27/2011
  dmi.bios.vendor: Acer
  dmi.bios.version: V2.14
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: BA51_DN
  dmi.board.vendor: Acer
  dmi.board.version: Base Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V2.14
  dmi.modalias: 
dmi:bvnAcer:bvrV2.14:bd07/27/2011:svnAcer:pnTravelMate5542G:pvrV2.14:rvnAcer:rnBA51_DN:rvrBaseBoardVersion:cvnAcer:ct10:cvrV2.14:
  dmi.product.name: TravelMate 5542G
  dmi.product.version: V2.14
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.10+13.10.20130828.2-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.46-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.2-1ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.2-1ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.14.2.901-2ubuntu4
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu4
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.14-4ubuntu3
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.9-2ubuntu1
  xserver.bootTime: Fri Aug 30 11:53:04 2013
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs: Output  
XMIR-1  XMIR-2
  xserver.version: 2:1.14.2.901-2ubuntu4
  xserver.video_driver: radeon

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1218815/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 565607] Re: [RV100] suspend failure with kernel driver radeon (ATI Technologies Inc Radeon Mobility M6 LY)

PhilippeDePass, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/565607/comments/14
regarding you no longer have the hardware. For future reference you can
manage the status of your own bugs by clicking on the current status in
the yellow line and then choosing a new status in the revealed drop down
box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Incomplete = Invalid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu.
https://bugs.launchpad.net/bugs/565607

Title:
  [RV100] suspend failure with kernel driver radeon (ATI Technologies
  Inc Radeon Mobility M6 LY)

Status in X.org XServer - ATI gfx chipset driver:
  Confirmed
Status in “linux” package in Ubuntu:
  Invalid
Status in “xserver-xorg-video-ati” package in Ubuntu:
  Invalid

Bug description:
  The system fails to suspend both to ram and to disk.  I believe it is
  a problem with the video driver radeon, as the screen never turns
  off.

  I followed the instructions from
  https://wiki.ubuntu.com/DebuggingKernelSuspend

  After performing
  sudo sh -c sync; echo 1  /sys/power/pm_trace; pm-suspend

  The output from dmesg points to
  [0.333831]   hash matches 
/build/buildd/linux-2.6.32/drivers/base/power/main.c:433
  [0.333853] block loop5: hash matches
  [0.333921] pci :01:00.0: hash matches

  sudo lspci -vvnn | grep -A 17 01:00.0
  01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon 
Mobility M6 LY [1002:4c59]
   Subsystem: IBM Device [1014:052f]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR+ FastB2B+ DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- 
MAbort- SERR- PERR- INTx-
   Latency: 66 (2000ns min), Cache Line Size: 32 bytes
   Interrupt: pin A routed to IRQ 11
   Region 0: Memory at e000 (32-bit, prefetchable) [size=128M]
   Region 1: I/O ports at 3000 [size=256]
   Region 2: Memory at c010 (32-bit, non-prefetchable) [size=64K]
   [virtual] Expansion ROM at c012 [disabled] [size=128K]
   Capabilities: [58] AGP version 2.0
    Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- 
AGP3- Rate=x1,x2,x4
    Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
   Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: radeon
   Kernel modules: radeonfb, radeon

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-21-generic 2.6.32-21.32
  Regression: No
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  phil   4497 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981B at irq 11'
     Mixer name : 'Analog Devices AD1981B'
     Components : 'AC97a:41445374'
     Controls  : 26
     Simple ctrls  : 18
  Card29.Amixer.info:
   Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 
1QHT23WW-1.08'
     Mixer name : 'ThinkPad EC 1QHT23WW-1.08'
     Components : ''
     Controls  : 2
     Simple ctrls  : 1
  Card29.Amixer.values:
   Simple mixer control 'Console',0
     Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
     Playback channels: Mono
     Limits: Playback 0 - 14
     Mono: Playback 4 [29%] [on]
  Date: Sat Apr 17 17:04:56 2010
  HibernationDevice: RESUME=UUID=3337d611-1642-45e5-b992-c61577a4235f
  InstallationMedia: Ubuntu 10.04 Lucid Lynx - Beta i386 (20100318)
  Lsusb:
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: IBM 2672PBU
  PccardctlIdent:
   Socket 0:
     no product info available
   Socket 1:
     no product info available
  PccardctlStatus:
   Socket 0:
     no card
   Socket 1:
     no card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic 
root=UUID=7240df37-503f-4eeb-832f-a46f9d5a5b4b ro quiet splash
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.34
  RfKill:
   0: tpacpi_bluetooth_sw: Bluetooth
    Soft blocked: yes
    Hard blocked: no
  SourcePackage: linux
  dmi.bios.date:

[Desktop-packages] [Bug 1219908] Re: [needs-packaging] All nvidia-current and nvidia-updates need repackaging to mirror official Nvidia releases...

2013-09-16 Thread Alberto Milone

** Changed in: nvidia-graphics-drivers-319-updates (Ubuntu)
   Status: Confirmed = In Progress

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-304 in Ubuntu.
https://bugs.launchpad.net/bugs/1219908

Title:
  [needs-packaging] All nvidia-current and nvidia-updates need
  repackaging to mirror official Nvidia releases...

Status in Nvidia Feature Request and Bug Reporting:
  New
Status in “nvidia-graphics-drivers-304” package in Ubuntu:
  Confirmed
Status in “nvidia-graphics-drivers-319-updates” package in Ubuntu:
  In Progress

Bug description:
  The official Nvidia long-lived-branch stable driver is now 319.49.
  That means that the recommended official driver is 319.49 and should
  be used by all Nvidia users except those using old legacy devices.
  There are important fixes that are in this driver and the previous
  319.17 that affect Chromium browser users especially:

  + Fixed a memory leak that occurred when destroying a GLX window but
  not its associated X window.

  These can crash machines using Nvidia GPU's according to a Chromium-
  bug http://crbug.com/145600 NVIDIA linux drivers are unstable when
  using multiple Open GL contexts and with low memory.: and if check
  `about:gpu` you will see this is a major reason most if not all Nvidia
  GPU's are currently blacklisted.

  Also, when using Windows 7 I am at liberty to install any driver
  version I want, keeping my machine up to date with the latest official
  Nvidia fixes.  With Ubuntu I'm stuck with older drivers that affect
  performance and contain old bugs that have already been fixed.  This
  leads to a lower quality experience than with Windows.  Drivers need
  to be kept current with upstream in my opinion.  For the time being I
  have been cherry-picking *.deb packages from X-Org-Edgers so that I
  can replicate that Windows experience and it's been working.  However,
  all Ubuntu users should have this experience as well and most do not
  know how to manually install packages using DPKG so it is out of their
  reach.

  The current Nvidia driver versions are as follows:
  http://www.nvidia.com/object/unix.html

  Long Lived Branch version: 319.49 -- `nvidia-current` should be here as 
stable
  Short Lived Branch version: 325.15 -- `nvidia-updates` should be here as 
unstable
  Legacy GPU version (304.xx series): 304.108 -- `nvidia-current-legacy` 
should be here.

  This situation has to be solved, Ubuntu cannot be so far behind the
  curve that it cannot keep Nvidia drivers fresh and in sync with the
  upstream Nvidia release schedule...

To manage notifications about this bug go to:
https://bugs.launchpad.net/nvidia/+bug/1219908/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 569875] Re: 8086:3582 [i855gm] xorg with 2.6.32 kernel halt system when load on Intel 855GM with xserver-xorg-video-intel driver

*** This bug is a duplicate of bug 566379 ***
https://bugs.launchpad.net/bugs/566379

** Summary changed:

- [i855gm] xorg with 2.6.32 kernel halt system when load on Intel 855GM with 
xserver-xorg-video-intel driver
+ 8086:3582 [i855gm] xorg with 2.6.32 kernel halt system when load on Intel 
855GM with xserver-xorg-video-intel driver

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/569875

Title:
  8086:3582 [i855gm] xorg with 2.6.32 kernel halt system when load on
  Intel 855GM with xserver-xorg-video-intel driver

Status in “xserver-xorg-video-intel” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: xserver-xorg-video-intel

  I have use Acer C300 notebook with Intel 855GME chipset.

  Ubuntu Karmic works good with intel driver and composing. I upgraded to 
Lucid.  
  Ubuntu Lucid  in text mode works good. 
  Bud when the xorg loads, the computer halts (CapsLock, NumLock didn't work).

  If I try to load older kernel (2.6.31-17 from Karmic) it boots
  normally.

  But when I try again 2.6.32-20, it halts again.

  If I remove package xserver-xorg-video-intel, it boots normally with
  2.6.32, but when install it back - halts again.

  In dmesg.log I see last strings:
  [   26.346445] ppdev: user-space parallel port driver
  [   27.110466] [drm] DAC-6: set mode 640x480 0

  But with 2.6.31 kernel next are:
  [   27.201755] [drm] DAC-6: set mode 640x480 0

   
  [   27.362196] yenta_cardbus :02:01.0: CardBus bridge found [1025:0038]   

   
  [   27.362218] yenta_cardbus :02:01.0: O2: res at 0x94/0xD4: 00/ea

   
  [   27.36] yenta_cardbus :02:01.0: O2: enabling read prefetch/write 
burst   
 
  [   27.365527] lib80211: common routines for IEEE802.11 drivers   

   
  [   27.365532] lib80211_crypt: registered algorithm 'NULL'
 

  What I can try to prevent halting? Can I give any additional info for
  you?

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: xserver-xorg-video-intel 2:2.9.1-3ubuntu4
  ProcVersionSignature: Ubuntu 2.6.31-17.54-generic
  Uname: Linux 2.6.31-17-generic i686
  Architecture: i386
  Date: Sun Apr 25 22:50:34 2010
  DkmsStatus: Error: [Errno 2] No such file or directory
  GdmLog:
   Error: command ['kdesudo', '--', 'cat', '/var/log/gdm/:0.log'] failed with 
exit code 1: QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch 
failed: No such file or directory
   QFileSystemWatcher: failed to add paths: /home/murz/.config/ibus/bus
   Bus::open: Can not get ibus-daemon's address. 
   IBusInputContext::createInputContext: no connection to ibus-daemon 
   cat: /var/log/gdm/:0.log: No such file or directory
  GdmLog1: Error: command ['kdesudo', '--', 'cat', '/var/log/gdm/:0.log.1'] 
failed with exit code 1: cat: /var/log/gdm/:0.log.1: No such file or directory
  GdmLog2: Error: command ['kdesudo', '--', 'cat', '/var/log/gdm/:0.log.2'] 
failed with exit code 1: cat: /var/log/gdm/:0.log.2: No such file or directory
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Acer TravelMate C300
  PccardctlIdent:
   Socket 0:
 no product info available
   Socket 1:
 product info: O2Micro, SmartCardBus Reader, V1.0, 
 manfid: 0x, 0x0001
  PccardctlStatus:
   Socket 0:
 no card
   Socket 1:
 5.0V 16-bit PC Card
 Subdevice 0 (function 0) [unbound]
  ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.31-17-generic 
root=UUID=f4c0c318-f5b4-4d08-8b93-3d796f38c2aa ro quiet splash
  ProcEnviron:
   LANGUAGE=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: xserver-xorg-video-intel
  dmi.bios.date: 01/05/05
  dmi.bios.vendor: Phoenix Technologies LTD
  dmi.bios.version: V1.13
  dmi.board.name: TravelMate C300
  dmi.board.vendor: Acer
  dmi.board.version: Rev.A
  dmi.chassis.type: 1
  dmi.chassis.vendor: Acer
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLTD:bvrV1.13:bd01/05/05:svnAcer:pnTravelMateC300:pvr-1:rvnAcer:rnTravelMateC300:rvrRev.A:cvnAcer:ct1:cvrN/A:
  dmi.product.name: TravelMate

[Desktop-packages] [Bug 566133] Re: 8086:3582 [kms-blacklisted][855] Black screen on boot without

*** This bug is a duplicate of bug 566379 ***
https://bugs.launchpad.net/bugs/566379

** Summary changed:

- [kms-blacklisted][855] Black screen on boot without
+ 8086:3582 [kms-blacklisted][855] Black screen on boot without

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/566133

Title:
  8086:3582 [kms-blacklisted][855] Black screen on boot without

Status in “xserver-xorg-video-intel” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: xserver-xorg-video-intel

  This started when updating two-three days ago (with intel 2.2.9-1-3?). 
  Had to start 2.6.31-20-generic failsafe to report it.
  Seems related to an earlier bug: 
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/269765 

  Just noticed: 
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/566103 
  Probably the same.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: xserver-xorg-video-intel 2:2.9.1-3ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-20.30-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-20-generic i686
  Architecture: i386
  Date: Sun Apr 18 20:06:13 2010
  DkmsStatus: Error: [Errno 2] Filen eller katalogen finns inte
  GdmLog1:
   
  InstallationMedia: Ubuntu 10.04 Lucid Lynx - Alpha i386 (20100223.2)
  Lsusb:
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 002: ID 093a:2500 Pixart Imaging, Inc. USB Optical Mouse
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Dell Inc. Latitude D505
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 3.3V 32-bit PC Card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-20-generic 
root=UUID=36eafaca-60eb-4707-acfe-7851d27635f7 ro quiet splash
  ProcEnviron:
   PATH=(custom, no user)
   LANG=sv_SE.utf8
   SHELL=/bin/bash
  SourcePackage: xserver-xorg-video-intel
  XorgLogOld:
   
  dmi.bios.date: 04/26/2004
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A05
  dmi.board.name: 0H2049
  dmi.board.vendor: Dell Inc.
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA05:bd04/26/2004:svnDellInc.:pnLatitudeD505:pvr:rvnDellInc.:rn0H2049:rvr:cvnDellInc.:ct8:cvr:
  dmi.product.name: Latitude D505
  dmi.sys.vendor: Dell Inc.
  system:
   distro: Ubuntu
   codename:   lucid
   architecture:   i686
   kernel: 2.6.32-20-generic

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/566133/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 566103] Re: 8086:3582 blank screen and complete lockup when X starts on Intel 855GM Chipset

*** This bug is a duplicate of bug 566379 ***
https://bugs.launchpad.net/bugs/566379

** Summary changed:

- blank screen and complete lockup when X starts on Intel 855GM Chipset 
+ 8086:3582 blank screen and complete lockup when X starts on Intel 855GM 
Chipset

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/566103

Title:
  8086:3582 blank screen and complete lockup when X starts on Intel
  855GM Chipset

Status in X.org xf86-video-intel:
  Invalid
Status in “xserver-xorg-video-intel” package in Ubuntu:
  New

Bug description:
  Binary package hint: xserver-xorg-video-intel

  Happens with lucid default kernel 2.6.32-21-generic, need to start
  failsafeX there.

  Using old karmic default kernel 2.6.31-20-generic, X starts but
  refrains using DRI which it did on karmic.

  Might be due to kernel module i915?

  So, besides the lockup, how to tell the X driver not to disable DRI?
  (Also lucid kernel deactivates kernel modesetting for i915.)

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: xserver-xorg-video-intel 2:2.9.1-3ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  BootDmesg:
   
  Date: Sun Apr 18 19:11:01 2010
  DkmsStatus: Error: [Errno 2] No such file or directory
  Lsusb:
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: MTC Montara-GML
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic 
root=UUID=260f888b-e25c-42e1-b3a6-474579cbee3b ro single
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: xserver-xorg-video-intel
  XorgLog:
   
  XorgLogOld:
   
  dmi.bios.date: 06/09/2004
  dmi.bios.vendor: Insyde Software Corporation
  dmi.bios.version: R1.07
  dmi.board.name: Montara-GML
  dmi.board.vendor: MTC
  dmi.board.version: FAB-2
  dmi.chassis.asset.tag: 12345678
  dmi.chassis.type: 8
  dmi.chassis.vendor: MTC
  dmi.chassis.version: A1
  dmi.modalias: 
dmi:bvnInsydeSoftwareCorporation:bvrR1.07:bd06/09/2004:svnMTC:pnMontara-GML:pvrFAB-2:rvnMTC:rnMontara-GML:rvrFAB-2:cvnMTC:ct8:cvrA1:
  dmi.product.name: Montara-GML
  dmi.product.version: FAB-2
  dmi.sys.vendor: MTC
  system:
   distro: Ubuntu
   codename:   lucid
   architecture:   i686
   kernel: 2.6.32-21-generic

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/566103/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 565870] Re: 8086:3582 Xorg crashes with 855GM on boot: Failed to submit batchbuffer: Input/output error

*** This bug is a duplicate of bug 566379 ***
https://bugs.launchpad.net/bugs/566379

** Summary changed:

- Xorg crashes with 855GM on boot: Failed to submit batchbuffer: Input/output 
error
+ 8086:3582 Xorg crashes with 855GM on boot: Failed to submit batchbuffer: 
Input/output error

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/565870

Title:
  8086:3582 Xorg crashes with 855GM on boot: Failed to submit
  batchbuffer: Input/output error

Status in “xserver-xorg-video-intel” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: xserver-xorg-video-intel

  After updating to xserver-xorg-video-intel to version 2:2.9.1-3ubuntu4
  on a laptop running Lucid Lynx beta, and rebooting, it crashed after
  showing the boot splash screen. The machine was not reachable via ssh,
  so I rebooted it in single user mode and found the following error msg
  in the Xorg log:

  Fatal server error:
  Failed to submit batchbuffer: Input/output error

  The laptop is using intel's 855GM integrated graphics, which used to
  work fine with the previous version of the driver. I've tried
  disabling KMS from the grub cmd line, but the result is the same.

  I'm enclosing the logs for the failed boot, as well as the lspci
  output. Please let me know if any other information could be of any
  help.

  Thanks

  Manuel

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: xserver-xorg-video-intel 2:2.9.1-3ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Sat Apr 18 11:54:46 2010
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release Candidate i386 
(20091020.3)
  ProcEnviron:
   LANG=en_GB.utf8
   SHELL=/bin/bash
  SourcePackage: xserver-xorg-video-intel

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/565870/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226009] [NEW] DisplayPort monitor is blank after unplug/replug or switch off/on

2013-09-16 Thread Adrian Johnson

Public bug reported:

I have two Dell U2711 monitors plugged into a HD7750 card. One monitor
is connector via DisplayPort, the other via DVI. If I switch the
monitors off then on again the monitor connected via DisplayPort
displays a blank screen. The DVI monitor works correctly. I have to
reboot the machine to get the DisplayPort monitor working again. This
problem did not occur with 13.04.

ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: xserver-xorg-video-radeon 1:7.2.0-0ubuntu6
ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
Uname: Linux 3.11.0-7-generic x86_64
ApportVersion: 2.12.1-0ubuntu4
Architecture: amd64
Date: Mon Sep 16 20:59:55 2013
InstallationDate: Installed on 2013-09-14 (2 days ago)
InstallationMedia: Xubuntu 13.10 Saucy Salamander - Alpha amd64 (20130902.1)
MarkForUpload: True
SourcePackage: xserver-xorg-video-ati
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: xserver-xorg-video-ati (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug saucy

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu.
https://bugs.launchpad.net/bugs/1226009

Title:
  DisplayPort monitor is blank after unplug/replug or switch off/on

Status in “xserver-xorg-video-ati” package in Ubuntu:
  New

Bug description:
  I have two Dell U2711 monitors plugged into a HD7750 card. One monitor
  is connector via DisplayPort, the other via DVI. If I switch the
  monitors off then on again the monitor connected via DisplayPort
  displays a blank screen. The DVI monitor works correctly. I have to
  reboot the machine to get the DisplayPort monitor working again. This
  problem did not occur with 13.04.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: xserver-xorg-video-radeon 1:7.2.0-0ubuntu6
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Uname: Linux 3.11.0-7-generic x86_64
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: amd64
  Date: Mon Sep 16 20:59:55 2013
  InstallationDate: Installed on 2013-09-14 (2 days ago)
  InstallationMedia: Xubuntu 13.10 Saucy Salamander - Alpha amd64 (20130902.1)
  MarkForUpload: True
  SourcePackage: xserver-xorg-video-ati
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/1226009/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 577850] Re: 8086:3582 Graphics card Intel 82852/82855 GM/GME do not work on kernel 2.6.32

*** This bug is a duplicate of bug 566379 ***
https://bugs.launchpad.net/bugs/566379

** Summary changed:

- Graphics card Intel 82852/82855 GM/GME do not work on kernel 2.6.32
+ 8086:3582 Graphics card Intel 82852/82855 GM/GME do not work on kernel 
2.6.32

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/577850

Title:
  8086:3582 Graphics card Intel 82852/82855 GM/GME do not work on
  kernel 2.6.32

Status in “xorg” package in Ubuntu:
  New

Bug description:
  Binary package hint: xorg

  My graphics card Intel 82852/82855 GM/GME not work in kernel
  2.6.31-21 and 2.6.32-22

  $ lsb_release -rd
  Description:Ubuntu 10.04 LTS
  Release:10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: xorg 1:7.5+5ubuntu1
  ProcVersionSignature: Ubuntu 2.6.31-20.58-generic
  Uname: Linux 2.6.31-20-generic i686
  Architecture: i386
  Date: Sun May  9 21:16:20 2010
  DkmsStatus: Error: [Errno 2] Нет такого файла или каталога
  GdmLog:
   Error: command ['kdesudo', '--', 'cat', '/var/log/gdm/:0.log'] failed with 
exit code 1: QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch 
failed: No such file or directory
   QFileSystemWatcher: failed to add paths: /home/kurd/.config/ibus/bus
   Bus::open: Can not get ibus-daemon's address. 
   IBusInputContext::createInputContext: no connection to ibus-daemon 
   cat: /var/log/gdm/:0.log: No such file or directory
  GdmLog1: Error: command ['kdesudo', '--', 'cat', '/var/log/gdm/:0.log.1'] 
failed with exit code 1: cat: /var/log/gdm/:0.log.1: No such file or directory
  GdmLog2: Error: command ['kdesudo', '--', 'cat', '/var/log/gdm/:0.log.2'] 
failed with exit code 1: cat: /var/log/gdm/:0.log.2: No such file or directory
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LG Electronics LS50-TS6R
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 3.3V 32-bit PC Card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic 
root=UUID=d519cda4-d836-47b2-82d8-15da26ca8be3 ro quiet splash
  ProcEnviron:
   LANGUAGE=
   LANG=ru_RU.UTF-8
   SHELL=/bin/bash
  SourcePackage: xorg
  XorgLogOld:
   
  dmi.bios.date: 12/10/2004
  dmi.bios.vendor: Phoenix Technologies LTD
  dmi.bios.version: MDEMSF11
  dmi.board.name: MCKINLEY
  dmi.board.vendor: LG Electronics
  dmi.board.version: None
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LG Electronics
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLTD:bvrMDEMSF11:bd12/10/2004:svnLGElectronics:pnLS50-TS6R:pvrNotApplicable:rvnLGElectronics:rnMCKINLEY:rvrNone:cvnLGElectronics:ct10:cvrN/A:
  dmi.product.name: LS50-TS6R
  dmi.product.version: Not Applicable
  dmi.sys.vendor: LG Electronics
  system:
   distro: Ubuntu
   codename:   lucid
   architecture:   i686
   kernel: 2.6.31-20-generic

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/577850/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 580909] Re: 8086:3582 [i855] (Needs i915.modeset=1) Ubuntu can't boot with kernel 2.6.32-22, ok with low-graphics mode

*** This bug is a duplicate of bug 566379 ***
https://bugs.launchpad.net/bugs/566379

** Summary changed:

- [i855] (Needs i915.modeset=1) Ubuntu can't boot with kernel 2.6.32-22, ok 
with low-graphics mode
+ 8086:3582 [i855] (Needs i915.modeset=1) Ubuntu can't boot with kernel 
2.6.32-22, ok with low-graphics mode

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/580909

Title:
  8086:3582 [i855] (Needs i915.modeset=1) Ubuntu can't boot with kernel
  2.6.32-22, ok with low-graphics mode

Status in “xserver-xorg-video-intel” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: xorg

  When booting with last kernel (linux
  /boot/vmlinuz-2.6.32-22-generic root=UUID=e155cf1e-
  0c53-4da9-a11c-719227305121 ro   quiet splash), Ubuntu blocks on black
  screen, and I need to reboot my computer via the power button.

  No problem if I boot in low graphics mode (linux
/boot/vmlinuz-2.6.32-22-generic root=UUID=e155cf1e-0c53-4da9-a11c-719227305121 
ro single), or with the previous kernel (linux   
/boot/vmlinuz-2.6.31-21-generic root=UUID=e155cf1e-0c53-4da9-a11c-719227305121 
ro   quiet splash).
  THis computer did not have such problem before on Karmic nor Jaunty.

  Here-under the result of a ubuntu-bug xorg, done on the 32-22 low
  graphic mode :

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: xorg 1:7.5+5ubuntu1
  ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-22-generic i686
  Architecture: i386
  Date: Sat May 15 19:54:50 2010
  DkmsStatus: Error: [Errno 2] No such file or directory
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  Lsusb:
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Acer TravelMate 240
  PccardctlIdent:
   Socket 0:
     no product info available
   Socket 1:
     no product info available
  PccardctlStatus:
   Socket 0:
     no card
   Socket 1:
     no card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic 
root=UUID=e155cf1e-0c53-4da9-a11c-719227305121 ro single
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: xorg
  dmi.bios.date: 08/21/03
  dmi.bios.vendor: Phoenix Technologies LTD
  dmi.bios.version: V1.09
  dmi.board.name: TravelMate 240
  dmi.board.vendor: Acer
  dmi.board.version: Rev.A
  dmi.chassis.type: 1
  dmi.chassis.vendor: Acer
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLTD:bvrV1.09:bd08/21/03:svnAcer:pnTravelMate240:pvr-1:rvnAcer:rnTravelMate240:rvrRev.A:cvnAcer:ct1:cvrN/A:
  dmi.product.name: TravelMate 240
  dmi.product.version: -1
  dmi.sys.vendor: Acer
  system:
   distro: Ubuntu
   codename:   lucid
   architecture:   i686
   kernel: 2.6.32-22-generic

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/580909/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 593239] Re: 8086:3582 [855gm] black screen at logon screen on 1st boot after install

*** This bug is a duplicate of bug 566379 ***
https://bugs.launchpad.net/bugs/566379

** Summary changed:

- [855gm] black screen at logon screen on 1st boot after install
+ 8086:3582 [855gm] black screen at logon screen on 1st boot after install

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/593239

Title:
  8086:3582 [855gm] black screen at logon screen on 1st boot after
  install

Status in “xserver-xorg-video-intel” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: ubuntuone-client

  I am a newbie using 9.1 with no problem. Using synpac updates I am up to date 
and tried to upgrade. The upgrade to 10.4 downloade fine but on re booting the 
logo and flashing dots appeared and then a flash of colour followed by  a blank 
screen.
  As I was going for a full install I had no option but to re install 9.1. I 
also obtained a new 10.4 LTS distro from a friend, tried that but with the same 
result.

  ProblemType: Bug
  .home.tony..cache.ubuntuone.log.oauth.login.log: 2010-06-13 
06:41:52,680:680.953025818 UbuntuOne.Client.Applet Starting Ubuntu One client 
version 1.0.3
  .home.tony..config.ubuntuone.syncdaemon.conf:
   [bandwidth_throttling]
   on = False
   read_limit = 0
   write_limit = 0
  .home.tony..config.ubuntuone.ubuntuone.client.conf:
   [ubuntuone]
   show_applet = 1
   connected = True
   connect = 0
   bookmarked = True
  Architecture: i386
  Date: Sun Jun 13 06:47:18 2010
  DistroRelease: Ubuntu 9.10
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  Package: ubuntuone-client 1.0.3-0ubuntu1
  PackageArchitecture: all
  ProcEnviron:
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 2.6.31-22.60-generic
  SourcePackage: ubuntuone-client
  Uname: Linux 2.6.31-22-generic i686

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/593239/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1125011] Re: screen save still active after being disabled

2013-09-16 Thread fyo

Running latest 13.10 daily.

This appears to be a very simple bug in gnome-settings-center where the
Never option is plain broken.

The behavior is easy to verify by using dconf-editor.

Setting theTurn screen off when inactive for: variable to any of the
other options updates a variable called idle-delay in
gnome::desktop::session. Selecting 10 minutes, for example, sets the
value to 600. An hour to 3600.

Selecting Never doesn't change the variable.

Manually changing the idle-delay value to 0 results in the expected
Never behavior.

Presumably, this is what the Never option should do, although
disabling the gnome::desktop::screensaver::idle-activation-enabled
bool would accomplish the same thing.

Related, gnome-settings-center doesn't correctly check the idle-delay
value and simply sets the combobox to Never when the Brightness  Lock
screen is entered.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1125011

Title:
  screen save still active after being disabled

Status in “gnome-control-center” package in Ubuntu:
  Confirmed

Bug description:
  On a remote machine, no keyboard or mouse connected. Set up to auto
  login and start a browser in kiosk mode as a monitoring dash board for
  our office.

  The only way to enable this to run for the whole day is to connect a
  keyboard and break out of the screen save when it first runs. After
  that it will not go into the screen saver for the rest of the day.

  all settings  brightness  lock 
     Turn screen off when inactive  for: never

     lock : off

  all settings  power 
     suspend when inactive for : don't suspend 

  I have tried using different values for like 1 hour

  all settings  brightness  lock 
     Turn screen off when inactive  for: 1 hour

  After 10 minutes monitor goes blank, as if Turn screen off when
  inactive: 10 min is set.

  I have tried
  xset -dpms
  xset s off

  current xset after clean boot

  xset -q
  Keyboard Control:
    auto repeat:  onkey click percent:  0LED mask:  
    XKB indicators:
  00: Caps Lock:   off01: Num Lock:off02: Scroll Lock: off
  03: Compose: off04: Kana:off05: Sleep:   off
  06: Suspend: off07: Mute:off08: Misc:off
  09: Mail:off10: Charging:off11: Shift Lock:  off
  12: Group 2: off13: Mouse Keys:  off
    auto repeat delay:  500repeat rate:  33
    auto repeating keys:  00ffdbbf
  fadfffefffed
  9fff
  fff7
    bell percent:  50bell pitch:  400bell duration:  100
  Pointer Control:
    acceleration:  7/2threshold:  1
  Screen Saver:
    prefer blanking:  yesallow exposures:  yes
    timeout:  0cycle:  0
  Colors:
    default colormap:  0x20BlackPixel:  0WhitePixel:  16777215
  Font Path:
    
/usr/share/fonts/X11/misc,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,built-ins
  DPMS (Energy Star):
    Standby: 0Suspend: 0Off: 0
    DPMS is Disabled

  I end up issue the following command remotely to get the monitor back on. 
Which will only work for 10 minutes till it blacks out again.
  sudo service lightdm restart

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-control-center 1:3.4.2-0ubuntu0.8
  ProcVersionSignature: Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2
  Uname: Linux 3.5.0-23-generic i686
  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: i386
  Date: Thu Feb 14 11:20:14 2013
  InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 
(20120817.3)
  MarkForUpload: True
  SourcePackage: gnome-control-center
  UpgradeStatus: No upgrade log present (probably fresh install)
  usr_lib_gnome-control-center:
   activity-log-manager-control-center 0.9.4-0ubuntu3.2
   deja-dup22.0-0ubuntu2
   gnome-bluetooth 3.2.2-0ubuntu5
   indicator-datetime  0.3.94-0ubuntu2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1125011/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Desktop-packages] [Bug 1225622] Re: [FUJITSU AMILO La1703, VT1708, playback] No sound at all

2013-09-16 Thread emildicule...@gmail.com

Yes, it's showing correctly the plugged device.


2013/9/16 Raymond 1225...@bugs.launchpad.net

 This is the output of hda-jack-sense-test:
  Pin 0x1d (Pink Mic): present = No
   Pin 0x1f (Green Line Out): present = No
   Pin 0x20 (Green HP Out): present = No

 did the result change to yes after you plug the headphone or Mic ?

 --
 You received this bug notification because you are subscribed to the bug
 report.
 https://bugs.launchpad.net/bugs/1225622

 Title:
   [FUJITSU AMILO La1703, VT1708, playback] No sound at all

 Status in “alsa-driver” package in Ubuntu:
   New

 Bug description:
   Description:  Ubuntu 13.04
   Release:  13.04

   The on-board soundcard appears on sound configuration page and on
   alsa-mixer, all the channels have the volume at maximum but it doesn't
   play any sound.

   ProblemType: Bug
   DistroRelease: Ubuntu 13.04
   Package: alsa-base 1.0.25+dfsg-0ubuntu4
   ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
   Uname: Linux 3.8.0-30-generic x86_64
   ApportVersion: 2.9.2-0ubuntu8.3
   Architecture: amd64
   AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0:  emil   2203 F pulseaudio
   Date: Sun Sep 15 11:45:59 2013
   EcryptfsInUse: Yes
   InstallationDate: Installed on 2013-03-15 (183 days ago)
   InstallationMedia: Xubuntu 13.04 Raring Ringtail - Alpha amd64
 (20130311.1)
   MarkForUpload: True
   PackageArchitecture: all
   SourcePackage: alsa-driver
   Symptom: audio
   Symptom_AlsaPlaybackTest: ALSA playback test through plughw:VT82xx failed
   Symptom_Card: VT8237A/VT8251 HDA Controller - HDA VIA VT82xx
   Symptom_DevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0:  emil   2203 F pulseaudio
   Symptom_Type: No sound at all
   Title: [HDA-Intel - HDA VIA VT82xx, playback] No sound at all
   UpgradeStatus: No upgrade log present (probably fresh install)
   dmi.bios.date: 08/02/2007
   dmi.bios.vendor: Phoenix
   dmi.bios.version: 8.2-0023-M007
   dmi.board.name: E25
   dmi.board.vendor: Inventec
   dmi.board.version: Rev 01
   dmi.chassis.asset.tag: User Asset Tag
   dmi.chassis.type: 10
   dmi.chassis.vendor: FUJITSU SIEMENS
   dmi.chassis.version: E25_
   dmi.modalias:
 dmi:bvnPhoenix:bvr8.2-0023-M007:bd08/02/2007:svnFUJITSUSIEMENS:pnAMILOLa1703:pvr1.0:rvnInventec:rnE25:rvrRev01:cvnFUJITSUSIEMENS:ct10:cvrE25_:
   dmi.product.name: AMILO La1703
   dmi.product.version: 1.0
   dmi.sys.vendor: FUJITSU SIEMENS

 To manage notifications about this bug go to:

 https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1225622/+subscriptions


-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225622

Title:
  [FUJITSU AMILO La1703, VT1708, playback] No sound at all

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  Description:  Ubuntu 13.04
  Release:  13.04

  The on-board soundcard appears on sound configuration page and on
  alsa-mixer, all the channels have the volume at maximum but it doesn't
  play any sound.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emil   2203 F pulseaudio
  Date: Sun Sep 15 11:45:59 2013
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2013-03-15 (183 days ago)
  InstallationMedia: Xubuntu 13.04 Raring Ringtail - Alpha amd64 (20130311.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:VT82xx failed
  Symptom_Card: VT8237A/VT8251 HDA Controller - HDA VIA VT82xx
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emil   2203 F pulseaudio
  Symptom_Type: No sound at all
  Title: [HDA-Intel - HDA VIA VT82xx, playback] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/02/2007
  dmi.bios.vendor: Phoenix
  dmi.bios.version: 8.2-0023-M007
  dmi.board.name: E25
  dmi.board.vendor: Inventec
  dmi.board.version: Rev 01
  dmi.chassis.asset.tag: User Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.chassis.version: E25_
  dmi.modalias: 
dmi:bvnPhoenix:bvr8.2-0023-M007:bd08/02/2007:svnFUJITSUSIEMENS:pnAMILOLa1703:pvr1.0:rvnInventec:rnE25:rvrRev01:cvnFUJITSUSIEMENS:ct10:cvrE25_:
  dmi.product.name: AMILO La1703
  dmi.product.version: 1.0
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1225622/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe :

Re: [Desktop-packages] [Bug 1223688] Re: Sync texlive-lang 2013.20130905-1 (main) from Debian unstable (main)

2013-09-16 Thread Norbert Preining

On Mo, 16 Sep 2013, Dmitrijs Ledkovs wrote:
 Is this needed for Saucy, or can this wait until next cycle? We are now
 post FeatureFreeze. Ditto the rest of texlive-* sync requests from you.

Feature wise there are hardly any changes, only updates of the
included TeX Live sub-components (sty files, fonts, etc).

On the other hand, pullin gtexlive-bin -2 would be a good idea,
it contains a lot of bug fixes from upstream.

Personally, as the maintainer of the Debian packages, I don't see
much problem in pulling the new releases.

Norbert


PREINING, Norbert   http://www.preining.info
JAIST, Japan TeX Live  Debian Developer
DSA: 0x09C5B094   fp: 14DF 2E6C 0307 BE6D AD76  A9C0 D2BF 4AA3 09C5 B094


-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to texlive-lang in Ubuntu.
https://bugs.launchpad.net/bugs/1223688

Title:
  Sync texlive-lang 2013.20130905-1 (main) from Debian unstable (main)

Status in “texlive-lang” package in Ubuntu:
  Incomplete

Bug description:
  Please sync texlive-lang 2013.20130905-1 (main) from Debian unstable
  (main)

  Changelog entries since current saucy version 2013.20130722-1:

  texlive-lang (2013.20130905-1) unstable; urgency=low

* new upstream checkout
* provide a bunch of transitional packages to easy update from
  stable (Closes: #721838)
* bump standards version to 3.9.4, no changes necessary

   -- Norbert Preining prein...@debian.org  Thu, 05 Sep 2013 11:47:05
  +0900

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/texlive-lang/+bug/1223688/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1103394] Re: [raring] History dialog does not decode UTF-8 (displays Ð·Ð° symbols)

2013-09-16 Thread Leonid Evdokimov

What package fixes the issue?
I still observe the bug in the logs and I have folowing '*pathy*' packages 
installed

$ dpkg -l | grep pathy | grep ^ii | awk '{printf %s=%s , $2, $3}'
empathy=3.6.4-0ubuntu4.1 empathy-common=3.6.4-0ubuntu4.1 
libfolks-telepathy22=0.4.2-0ubuntu1 libfolks-telepathy25=0.8.0-1 
libmission-control-plugins0=1:5.14.0-0ubuntu2 
libtelepathy-farstream3:amd64=0.6.0-1 libtelepathy-glib0:amd64=0.20.2-0ubuntu1 
libtelepathy-logger3:amd64=0.8.0-0ubuntu1 
nautilus-sendto-empathy=3.6.4-0ubuntu4.1 python-telepathy=0.15.19-2.1build1 
telepathy-gabble=0.16.5-0ubuntu1.1 telepathy-haze=0.6.0-1 
telepathy-idle=0.1.14-1ubuntu0.1 
telepathy-indicator=0.3.1daily13.03.01-0ubuntu1 telepathy-logger=0.8.0-0ubuntu1 
telepathy-mission-control-5=1:5.14.0-0ubuntu2 telepathy-rakia=0.7.4-1ubuntu1 
telepathy-salut=0.8.1-1 telepathy-sofiasip=0.7.4-1ubuntu1

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to empathy in Ubuntu.
https://bugs.launchpad.net/bugs/1103394

Title:
  [raring] History dialog does not decode UTF-8 (displays Ð·Ð° symbols)

Status in Chat app, and Telepathy user interface:
  Fix Released
Status in “empathy” package in Ubuntu:
  Triaged
Status in “empathy” package in Fedora:
  Unknown

Bug description:
  STR:

  1. Send e.g. Привет (Hello in Russian)
  2. Open Previous conversations

  Expected results:
  Last entry will be Привет

  Actual results:
  The last entry is ÐÑÐ¸Ð²ÐµÑ - UTF-8 bytes as if the encoding was latin1

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: empathy 3.6.3-0ubuntu2
  ProcVersionSignature: Ubuntu 3.8.0-1.5-generic 3.8.0-rc4
  Uname: Linux 3.8.0-1-generic x86_64
  ApportVersion: 2.8-0ubuntu2
  Architecture: amd64
  Date: Wed Jan 23 11:54:54 2013
  InstallationDate: Installed on 2013-01-04 (18 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130104)
  MarkForUpload: True
  SourcePackage: empathy
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/empathy/+bug/1103394/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1221014] Re: LibreOffice 4.1.x crashes on startup - Gnome-shell DE

2013-09-16 Thread Björn Michaelsen

This is totally unrelated to gnome-shell, please dont write such
misleading summaries next time without countertesting on e.g. Unity.

The reason is that because of mergedlibs some dependencies much be moved
from libreoffice-calc to -core, namely lp-solve. Installing lp-solve
manually (or -calc, which pulls in lpsolve) should work around the
problem.

** Changed in: libreoffice (Ubuntu)
   Status: Incomplete = New

** Changed in: libreoffice (Ubuntu)
 Assignee: (unassigned) = Björn Michaelsen (bjoern-michaelsen)

** Summary changed:

- LibreOffice 4.1.x crashes on startup - Gnome-shell DE
+ LibreOffice 4.1.x does not start without libreoffice-calc installed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1221014

Title:
  LibreOffice 4.1.x does not start without libreoffice-calc installed

Status in “libreoffice” package in Ubuntu:
  New

Bug description:
  The latest LibreOffice (versions 4.1.0-2ubuntu1 and 4.1.1-0ubuntu1) do not 
start in the Gnome-shell DE.
  I have three different setups (one desktop with NVidia, one with ATI and one 
laptop with Intel),
  all with Saucy development distro with no additional PPA's enabled.
  LibreOfiice 4.1.x works in none of them.

  For example LibreOffice Writer just does not start at all.
  The cursor spins for a few seconds, then nothing.
  Sometimes I can see the LibreOffice starting logo and then nothing.

  However, downgrading to the previous Saucy version 4.0.2-0ubuntu5
  helps, and all is well again.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1221014/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226019] [NEW] hp-setup eating up a cpu

2013-09-16 Thread Alan Pope ㋛

Public bug reported:

Plugged scanner in and scanned a document. Switched off scanner. I'm now
left with hp-setup consuming a core.

top - 13:18:35 up 1 day, 19:46, 13 users,  load average: 3.49, 4.45, 3.79
Tasks: 348 total,   7 running, 341 sleeping,   0 stopped,   0 zombie
%Cpu(s): 55.2 us,  9.0 sy,  0.0 ni, 34.4 id,  0.8 wa,  0.6 hi,  0.0 si,  0.0 st
KiB Mem:   8056628 total,  6330128 used,  1726500 free,   154464 buffers
KiB Swap:  8267772 total,  3306388 used,  4961384 free,   820600 cached

  PID USER  PR  NI  VIRT  RES  SHR S  %CPU %MEMTIME+  COMMAND   
21879 root  20   0  179m  41m 1352 R  99.3  0.5 852:03.41 hp-setup  
 6946 alan  20   0 1439m 497m  12m R  98.7  6.3  37:34.85 chromium-browse   
14675 root  20   0  124m  55m  656 R  20.2  0.7   5:47.95 rsync 
 3710 alan  20   0  752m 118m 5868 R   7.0  1.5  58:40.53 unity-panel-ser

ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: hplip 3.13.9-0ubuntu1
Uname: Linux 3.11.0-994-generic x86_64
ApportVersion: 2.12.1-0ubuntu4
Architecture: amd64
Date: Mon Sep 16 13:14:12 2013
EcryptfsInUse: Yes
InstallationDate: Installed on 2012-06-29 (443 days ago)
InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
Lpstat:
 device for HP-Officejet-6300-series: socket://192.168.1.3:9100
 device for Officejet_6300: hp:/net/Officejet_6300_series?zc=HP4337AB
 device for Officejet_6300_2: 
hp:/usb/Officejet_6300_series?serial=CN88BFB5N204M4
 device for Officejet_6300_fax: hpfax:/net/Officejet_6300_series?zc=HP4337AB
MachineType: LENOVO 4287CTO
MarkForUpload: True
Papersize: a4
PpdFiles:
 Officejet_6300: HP Officejet 6300 Series, hpcups 3.13.8
 HP-Officejet-6300-series: HP Officejet 6300 Series, hpcups 3.13.4
 Officejet_6300_2: HP Officejet 6300 Series, hpcups 3.13.9
 Officejet_6300_fax: HP Fax hpcups
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-994-generic 
root=UUID=c8438547-b9fb-46af-8012-4663c77c70e7 ro quiet splash vt.handoff=7
SourcePackage: hplip
UpgradeStatus: Upgraded to saucy on 2013-07-12 (65 days ago)
dmi.bios.date: 12/05/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: 8DET67WW (1.37 )
dmi.board.asset.tag: Not Available
dmi.board.name: 4287CTO
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4287CTO:pvrThinkPadX220:rvnLENOVO:rn4287CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 4287CTO
dmi.product.version: ThinkPad X220
dmi.sys.vendor: LENOVO

** Affects: hplip (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug saucy

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/1226019

Title:
  hp-setup eating up a cpu

Status in “hplip” package in Ubuntu:
  New

Bug description:
  Plugged scanner in and scanned a document. Switched off scanner. I'm
  now left with hp-setup consuming a core.

  top - 13:18:35 up 1 day, 19:46, 13 users,  load average: 3.49, 4.45, 3.79
  Tasks: 348 total,   7 running, 341 sleeping,   0 stopped,   0 zombie
  %Cpu(s): 55.2 us,  9.0 sy,  0.0 ni, 34.4 id,  0.8 wa,  0.6 hi,  0.0 si,  0.0 
st
  KiB Mem:   8056628 total,  6330128 used,  1726500 free,   154464 buffers
  KiB Swap:  8267772 total,  3306388 used,  4961384 free,   820600 cached

PID USER  PR  NI  VIRT  RES  SHR S  %CPU %MEMTIME+  COMMAND 
  
  21879 root  20   0  179m  41m 1352 R  99.3  0.5 852:03.41 hp-setup
  
   6946 alan  20   0 1439m 497m  12m R  98.7  6.3  37:34.85 chromium-browse 
  
  14675 root  20   0  124m  55m  656 R  20.2  0.7   5:47.95 rsync   
  
   3710 alan  20   0  752m 118m 5868 R   7.0  1.5  58:40.53 unity-panel-ser

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: hplip 3.13.9-0ubuntu1
  Uname: Linux 3.11.0-994-generic x86_64
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: amd64
  Date: Mon Sep 16 13:14:12 2013
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2012-06-29 (443 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
  Lpstat:
   device for HP-Officejet-6300-series: socket://192.168.1.3:9100
   device for Officejet_6300: hp:/net/Officejet_6300_series?zc=HP4337AB
   device for Officejet_6300_2: 
hp:/usb/Officejet_6300_series?serial=CN88BFB5N204M4
   device for Officejet_6300_fax: hpfax:/net/Officejet_6300_series?zc=HP4337AB
  MachineType: LENOVO 4287CTO
  MarkForUpload: True
  Papersize: a4
  PpdFiles:
   Officejet_6300: HP Officejet 6300 Series, hpcups 3.13.8
   HP-Officejet-6300-series: HP Officejet 6300 Series, hpcups 3.13.4
   Officejet_6300_2: HP Officejet 6300 Series, hpcups 3.13.9
   Officejet_6300_fax: HP Fax hpcups
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-994-generic

[Desktop-packages] [Bug 1225622] Re: [FUJITSU AMILO La1703, VT1708, playback] No sound at all

since 0x17 is the analog mixer , if node 0x1d is ext mic jack , the
possible node for the mic is 0x21 and line in is 0x1e

you need to retask node 0x17 to [Fixed] Mic at Int  and MISC =
NO_PRESENCE

Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name=PCM Playback Volume, index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name=PCM Playback Switch, index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name=Mic Playback Volume, index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name=Mic Playback Switch, index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x06, mute=1
  Amp-In vals:  [0x1f 0x1f] [0x80 0x80] [0x1f 0x1f] [0x80 0x80] [0x80 0x80] 
[0x80 0x80]
  Connection: 6
 0x10 0x24 0x1d 0x1e 0x21 0x13

Node 0x1d [Pin Complex] wcaps 0x400101: Stereo
  Control: name=Mic Phantom Jack, index=0, device=0
  Pincap 0x0334: IN OUT Detect
Vref caps: HIZ 50
  Pin Default 0x01a190f0: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x21: IN VREF_50
  Connection: 1
 0x1a
Node 0x1e [Pin Complex] wcaps 0x400101: Stereo
  Pincap 0x0334: IN OUT Detect
Vref caps: HIZ 50
  Pin Default 0x418130fe: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0xf, Sequence = 0xe
  Pin-ctls: 0x00: VREF_HIZ
  Connection: 1
 0x19

Node 0x21 [Pin Complex] wcaps 0x400101: Stereo
  Pincap 0x0334: IN OUT Detect
Vref caps: HIZ 50
  Pin Default 0x42a190f0: [N/A] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
  Pin-ctls: 0x00: VREF_HIZ
  Connection: 1
 0x1b

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225622

Title:
  [FUJITSU AMILO La1703, VT1708, playback] No sound at all

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  Description:  Ubuntu 13.04
  Release:  13.04

  The on-board soundcard appears on sound configuration page and on
  alsa-mixer, all the channels have the volume at maximum but it doesn't
  play any sound.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emil   2203 F pulseaudio
  Date: Sun Sep 15 11:45:59 2013
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2013-03-15 (183 days ago)
  InstallationMedia: Xubuntu 13.04 Raring Ringtail - Alpha amd64 (20130311.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:VT82xx failed
  Symptom_Card: VT8237A/VT8251 HDA Controller - HDA VIA VT82xx
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emil   2203 F pulseaudio
  Symptom_Type: No sound at all
  Title: [HDA-Intel - HDA VIA VT82xx, playback] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/02/2007
  dmi.bios.vendor: Phoenix
  dmi.bios.version: 8.2-0023-M007
  dmi.board.name: E25
  dmi.board.vendor: Inventec
  dmi.board.version: Rev 01
  dmi.chassis.asset.tag: User Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.chassis.version: E25_
  dmi.modalias: 
dmi:bvnPhoenix:bvr8.2-0023-M007:bd08/02/2007:svnFUJITSUSIEMENS:pnAMILOLa1703:pvr1.0:rvnInventec:rnE25:rvrRev01:cvnFUJITSUSIEMENS:ct10:cvrE25_:
  dmi.product.name: AMILO La1703
  dmi.product.version: 1.0
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1225622/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226020] [NEW] 上传的报告

2013-09-16 Thread 蒋卓玮

Public bug reported:

主动上传的报告

ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: xorg 1:7.7+1ubuntu5
ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
Uname: Linux 3.11.0-7-generic x86_64
NonfreeKernelModules: fglrx
.tmp.unity.support.test.0:
 
ApportVersion: 2.12.1-0ubuntu4
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
Date: Mon Sep 16 19:27:23 2013
DistUpgraded: Fresh install
DistroCodename: saucy
DistroVariant: ubuntu
DkmsStatus: fglrx, 13.101, 3.11.0-7-generic, x86_64: installed
GraphicsCard:
 Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
   Subsystem: ASUSTeK Computer Inc. Device [1043:1bf2]
InstallationDate: Installed on 2013-09-13 (3 days ago)
InstallationMedia: UbuntuKylin 13.10 Saucy Salamander - Alpha amd64 (20130724)
JockeyStatus:
 kmod:fglrx - ATI Fire GL (专有软件, 已启用, 使用中)
 kmod:fglrx_updates - Video driver for the AMD graphics accelerators (专有软件, 
已禁用, 未使用)
MachineType: ASUSTeK Computer Inc. K42JE
MarkForUpload: True
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-7-generic 
root=/dev/mapper/ubuntukylin--vg-root ro locale=zh_CN quiet splash vt.handoff=7
SourcePackage: xorg
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/26/2011
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 500
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: K42JE
dmi.board.vendor: ASUSTeK Computer Inc.
dmi.board.version: 1.0
dmi.chassis.asset.tag: 0x
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK Computer Inc.
dmi.chassis.version: 1.0
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr500:bd01/26/2011:svnASUSTeKComputerInc.:pnK42JE:pvr1.0:rvnASUSTeKComputerInc.:rnK42JE:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0:
dmi.product.name: K42JE
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK Computer Inc.
version.compiz: compiz 1:0.9.10+13.10.20130828.2-0ubuntu1
version.fglrx-installer: fglrx-installer N/A
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.46-1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.2-1ubuntu1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.2-1ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.14.2.901-2ubuntu4
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu6
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.14-4ubuntu4
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.9-2ubuntu1
xserver.bootTime: Mon Sep 16 16:52:34 2013
xserver.configfile: default
xserver.errors: open /dev/dri/card0: No such file or directory
xserver.logfile: /var/log/Xorg.0.log
xserver.version: 2:1.14.2.901-2ubuntu4
xserver.video_driver: fglrx

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 saucy ubuntu

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1226020

Title:
  上传的报告

Status in “xorg” package in Ubuntu:
  New

Bug description:
  主动上传的报告

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: xorg 1:7.7+1ubuntu5
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Uname: Linux 3.11.0-7-generic x86_64
  NonfreeKernelModules: fglrx
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Mon Sep 16 19:27:23 2013
  DistUpgraded: Fresh install
  DistroCodename: saucy
  DistroVariant: ubuntu
  DkmsStatus: fglrx, 13.101, 3.11.0-7-generic, x86_64: installed
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: ASUSTeK Computer Inc. Device [1043:1bf2]
  InstallationDate: Installed on 2013-09-13 (3 days ago)
  InstallationMedia: UbuntuKylin 13.10 Saucy Salamander - Alpha amd64 
(20130724)
  JockeyStatus:
   kmod:fglrx - ATI Fire GL (专有软件, 已启用, 使用中)
   kmod:fglrx_updates - Video driver for the AMD graphics accelerators (专有软件, 
已禁用, 未使用)
  MachineType: ASUSTeK Computer Inc. K42JE
  MarkForUpload: True
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-7-generic 
root=/dev/mapper/ubuntukylin--vg-root ro locale=zh_CN quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/26/2011
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 500
  dmi.board.asset.tag: ATN12345678901234567

Re: [Desktop-packages] [Bug 1225622] Re: [FUJITSU AMILO La1703, VT1708, playback] No sound at all

2013-09-16 Thread emildicule...@gmail.com

I don't have an internal mic, only jack for external mic, do I still need
to change the settings?
And, if I have to retask, is it enough to use hda-jack-retask or do I have
to change settings somewhere else?


2013/9/16 Raymond 1225...@bugs.launchpad.net

 since 0x17 is the analog mixer , if node 0x1d is ext mic jack , the
 possible node for the mic is 0x21 and line in is 0x1e

 you need to retask node 0x17 to [Fixed] Mic at Int  and MISC =
 NO_PRESENCE

 Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
   Control: name=PCM Playback Volume, index=0, device=0
 ControlAmp: chs=3, dir=In, idx=0, ofs=0
   Control: name=PCM Playback Switch, index=0, device=0
 ControlAmp: chs=3, dir=In, idx=0, ofs=0
   Control: name=Mic Playback Volume, index=0, device=0
 ControlAmp: chs=3, dir=In, idx=2, ofs=0
   Control: name=Mic Playback Switch, index=0, device=0
 ControlAmp: chs=3, dir=In, idx=2, ofs=0
   Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x06, mute=1
   Amp-In vals:  [0x1f 0x1f] [0x80 0x80] [0x1f 0x1f] [0x80 0x80] [0x80
 0x80] [0x80 0x80]
   Connection: 6
  0x10 0x24 0x1d 0x1e 0x21 0x13

 Node 0x1d [Pin Complex] wcaps 0x400101: Stereo
   Control: name=Mic Phantom Jack, index=0, device=0
   Pincap 0x0334: IN OUT Detect
 Vref caps: HIZ 50
   Pin Default 0x01a190f0: [Jack] Mic at Ext Rear
 Conn = 1/8, Color = Pink
 DefAssociation = 0xf, Sequence = 0x0
   Pin-ctls: 0x21: IN VREF_50
   Connection: 1
  0x1a
 Node 0x1e [Pin Complex] wcaps 0x400101: Stereo
   Pincap 0x0334: IN OUT Detect
 Vref caps: HIZ 50
   Pin Default 0x418130fe: [N/A] Line In at Ext Rear
 Conn = 1/8, Color = Blue
 DefAssociation = 0xf, Sequence = 0xe
   Pin-ctls: 0x00: VREF_HIZ
   Connection: 1
  0x19

 Node 0x21 [Pin Complex] wcaps 0x400101: Stereo
   Pincap 0x0334: IN OUT Detect
 Vref caps: HIZ 50
   Pin Default 0x42a190f0: [N/A] Mic at Ext Front
 Conn = 1/8, Color = Pink
 DefAssociation = 0xf, Sequence = 0x0
   Pin-ctls: 0x00: VREF_HIZ
   Connection: 1
  0x1b

 --
 You received this bug notification because you are subscribed to the bug
 report.
 https://bugs.launchpad.net/bugs/1225622

 Title:
   [FUJITSU AMILO La1703, VT1708, playback] No sound at all

 Status in “alsa-driver” package in Ubuntu:
   New

 Bug description:
   Description:  Ubuntu 13.04
   Release:  13.04

   The on-board soundcard appears on sound configuration page and on
   alsa-mixer, all the channels have the volume at maximum but it doesn't
   play any sound.

   ProblemType: Bug
   DistroRelease: Ubuntu 13.04
   Package: alsa-base 1.0.25+dfsg-0ubuntu4
   ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
   Uname: Linux 3.8.0-30-generic x86_64
   ApportVersion: 2.9.2-0ubuntu8.3
   Architecture: amd64
   AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0:  emil   2203 F pulseaudio
   Date: Sun Sep 15 11:45:59 2013
   EcryptfsInUse: Yes
   InstallationDate: Installed on 2013-03-15 (183 days ago)
   InstallationMedia: Xubuntu 13.04 Raring Ringtail - Alpha amd64
 (20130311.1)
   MarkForUpload: True
   PackageArchitecture: all
   SourcePackage: alsa-driver
   Symptom: audio
   Symptom_AlsaPlaybackTest: ALSA playback test through plughw:VT82xx failed
   Symptom_Card: VT8237A/VT8251 HDA Controller - HDA VIA VT82xx
   Symptom_DevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0:  emil   2203 F pulseaudio
   Symptom_Type: No sound at all
   Title: [HDA-Intel - HDA VIA VT82xx, playback] No sound at all
   UpgradeStatus: No upgrade log present (probably fresh install)
   dmi.bios.date: 08/02/2007
   dmi.bios.vendor: Phoenix
   dmi.bios.version: 8.2-0023-M007
   dmi.board.name: E25
   dmi.board.vendor: Inventec
   dmi.board.version: Rev 01
   dmi.chassis.asset.tag: User Asset Tag
   dmi.chassis.type: 10
   dmi.chassis.vendor: FUJITSU SIEMENS
   dmi.chassis.version: E25_
   dmi.modalias:
 dmi:bvnPhoenix:bvr8.2-0023-M007:bd08/02/2007:svnFUJITSUSIEMENS:pnAMILOLa1703:pvr1.0:rvnInventec:rnE25:rvrRev01:cvnFUJITSUSIEMENS:ct10:cvrE25_:
   dmi.product.name: AMILO La1703
   dmi.product.version: 1.0
   dmi.sys.vendor: FUJITSU SIEMENS

 To manage notifications about this bug go to:

 https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1225622/+subscriptions


-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225622

Title:
  [FUJITSU AMILO La1703, VT1708, playback] No sound at all

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  Description:  Ubuntu 13.04
  Release:  13.04

  The on-board soundcard appears on sound configuration page and on
  alsa-mixer, all the channels have the volume at maximum but it doesn't
  play any sound.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
  Uname:

[Desktop-packages] [Bug 1226019] Re: hp-setup eating up a cpu

Is your scanner the HP Officejet 6300? Or did you connect another
scanner? If you connected another scanner, which one?

Can someone of the HPLIP developers at HP have a look into this? Thanks.

** Also affects: hplip
   Importance: Undecided
   Status: New

** Changed in: hplip
   Status: New = Incomplete

** Changed in: hplip (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/1226019

Title:
  hp-setup eating up a cpu

Status in HP Linux Imaging and Printing:
  Incomplete
Status in “hplip” package in Ubuntu:
  Incomplete

Bug description:
  Plugged scanner in and scanned a document. Switched off scanner. I'm
  now left with hp-setup consuming a core.

  top - 13:18:35 up 1 day, 19:46, 13 users,  load average: 3.49, 4.45, 3.79
  Tasks: 348 total,   7 running, 341 sleeping,   0 stopped,   0 zombie
  %Cpu(s): 55.2 us,  9.0 sy,  0.0 ni, 34.4 id,  0.8 wa,  0.6 hi,  0.0 si,  0.0 
st
  KiB Mem:   8056628 total,  6330128 used,  1726500 free,   154464 buffers
  KiB Swap:  8267772 total,  3306388 used,  4961384 free,   820600 cached

PID USER  PR  NI  VIRT  RES  SHR S  %CPU %MEMTIME+  COMMAND 
  
  21879 root  20   0  179m  41m 1352 R  99.3  0.5 852:03.41 hp-setup
  
   6946 alan  20   0 1439m 497m  12m R  98.7  6.3  37:34.85 chromium-browse 
  
  14675 root  20   0  124m  55m  656 R  20.2  0.7   5:47.95 rsync   
  
   3710 alan  20   0  752m 118m 5868 R   7.0  1.5  58:40.53 unity-panel-ser

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: hplip 3.13.9-0ubuntu1
  Uname: Linux 3.11.0-994-generic x86_64
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: amd64
  Date: Mon Sep 16 13:14:12 2013
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2012-06-29 (443 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
  Lpstat:
   device for HP-Officejet-6300-series: socket://192.168.1.3:9100
   device for Officejet_6300: hp:/net/Officejet_6300_series?zc=HP4337AB
   device for Officejet_6300_2: 
hp:/usb/Officejet_6300_series?serial=CN88BFB5N204M4
   device for Officejet_6300_fax: hpfax:/net/Officejet_6300_series?zc=HP4337AB
  MachineType: LENOVO 4287CTO
  MarkForUpload: True
  Papersize: a4
  PpdFiles:
   Officejet_6300: HP Officejet 6300 Series, hpcups 3.13.8
   HP-Officejet-6300-series: HP Officejet 6300 Series, hpcups 3.13.4
   Officejet_6300_2: HP Officejet 6300 Series, hpcups 3.13.9
   Officejet_6300_fax: HP Fax hpcups
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-994-generic 
root=UUID=c8438547-b9fb-46af-8012-4663c77c70e7 ro quiet splash vt.handoff=7
  SourcePackage: hplip
  UpgradeStatus: Upgraded to saucy on 2013-07-12 (65 days ago)
  dmi.bios.date: 12/05/2012
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 8DET67WW (1.37 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 4287CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4287CTO:pvrThinkPadX220:rvnLENOVO:rn4287CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 4287CTO
  dmi.product.version: ThinkPad X220
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/hplip/+bug/1226019/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1216921] Re: util.ignore_missing() does not work

2013-09-16 Thread Matthias Witte

@Louis:

To reproduce this error you would have to monitor the file transfers to the ftp 
storage and on completion
remove the source files from the archieve directory, before duplicity reaches 
the unlink. You could probably
run duplicity in a debugger and set a breakpoint in line 567 path.py, print the 
file name it wants to delete and
remove it manually. Then continue.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
https://bugs.launchpad.net/bugs/1216921

Title:
  util.ignore_missing() does not work

Status in Duplicity - Bandwidth Efficient Encrypted Backup:
  Fix Committed
Status in “duplicity” package in Ubuntu:
  Fix Released
Status in “duplicity” source package in Precise:
  In Progress
Status in “duplicity” source package in Quantal:
  In Progress
Status in “duplicity” source package in Raring:
  In Progress

Bug description:
  duplicity version: 0.6.18-0ubuntu3 
  python version: 2.7.3
  Distro: ubuntu precise 12.04
  target file system: ftp

  I happen to encounter failed backups with tracebacks like this:

  Traceback (most recent call last):
File /usr/bin/duplicity, line 1403, in module
   with_tempdir(main)
File /usr/bin/duplicity, line 1396, in with_tempdir
   fn()
 File /usr/bin/duplicity, line 1366, in main
   full_backup(col_stats)
 File /usr/bin/duplicity, line 504, in full_backup
   sig_outfp.to_remote()
 File /usr/lib/python2.7/dist-packages/duplicity/dup_temp.py, line 184, 
in to_remote
   globals.backend.move(tgt) #@UndefinedVariable
 File /usr/lib/python2.7/dist-packages/duplicity/backend.py, line 364, in 
move
   source_path.delete()
 File /usr/lib/python2.7/dist-packages/duplicity/path.py, line 567, in 
delete
   util.ignore_missing(os.unlink, self.name)
 File /usr/lib/python2.7/dist-packages/duplicity/util.py, line 116, in 
ignore_missing
   fn(filename)
   OSError: [Errno 2] No such file or directory: 
'/BACKUP/.duplycache/duply_foo/duplicity-full-signatures.20130825T140002Z.sigtar.gpg'

  Now running test code like

  #!/usr/bin/env python
  #
  # Do what util.ignore_missing(os.unlink, self.name) tries to do and
  # fails to achieve

  import os
  import sys
  import errno

  if __name__ == __main__:
  try:
  os.unlink(/tmp/doesnotexist)
  except Exception:
  # type is a reserved keyword, replaced with mytype
  mytype, value, tb = sys.exc_info()
  print - * 78
  print mytype: , mytype
  print value: , value
  print value[0]:, value[0]
  print errno.ENOENT: , errno.ENOENT
  print isinstance(mytype, OSError): , isinstance(mytype, 
OSError)
  print - * 78
  if isinstance(mytype, OSError) and value[0] == errno.ENOENT:
  print Gotcha!
  pass
  print Ooops, missed it ...
  raise

  will always raise the exception and not ignore it, because
  isinstance(mytype, OSError) is always False.

  What I expect ignore_missing to look like is:

  def ignore_missing(fn, filename):
  
  Execute fn on filename.  Ignore ENOENT errors, otherwise raise exception.

  @param fn: callable
  @param filename: string
  
  try:
  fn(filename)
  except OSError, ex:
  if ex.errno == errno.ENOENT:
      pass
      else:
      raise
      else:
      raise

To manage notifications about this bug go to:
https://bugs.launchpad.net/duplicity/+bug/1216921/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1097519] Re: bcmwl-kernel-source_6.20 update breaks for BCM4313

2013-09-16 Thread Eero Aaltonen

Updated the title since bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3
seems to work fine.

** Summary changed:

- Wrong driver used for older Broadcom chipsets
+ bcmwl-kernel-source_6.20 update breaks for BCM4313

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ubuntu-drivers-common in Ubuntu.
https://bugs.launchpad.net/bugs/1097519

Title:
  bcmwl-kernel-source_6.20 update breaks for BCM4313

Status in “bcmwl” package in Ubuntu:
  Confirmed
Status in “ubuntu-drivers-common” package in Ubuntu:
  Confirmed

Bug description:
  On upgrade to 13.04, the wl.ko, package bcmwl-kernel-source drier is
  selected.

  This driver does not allow the computer to boot and causes great pain in 
recovery for users, most of which will not be able to get the Ubuntu 
installation functional
  https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1097509

  Instead use the driver brcmsmac, that actually works with BCM4313

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.7.0-7-generic 3.7.0-7.15
  ProcVersionSignature: Ubuntu 3.7.0-7.15-generic 3.7.0
  Uname: Linux 3.7.0-7-generic i686
  ApportVersion: 2.7-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  foxyboy1904 F pulseaudio
  Date: Tue Jan  8 15:36:51 2013
  HibernationDevice: RESUME=UUID=695c8efa-91da-424d-983e-cc08dd01eba3
  MachineType: LENOVO 20040M18
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-7-generic 
root=UUID=8b809c57-f15a-464f-a7a9-fafb8abaa715 ro quiet
  RelatedPackageVersions:
   linux-restricted-modules-3.7.0-7-generic N/A
   linux-backports-modules-3.7.0-7-generic  N/A
   linux-firmware   1.99
  SourcePackage: linux
  UpgradeStatus: Upgraded to raring on 2013-01-08 (0 days ago)
  dmi.bios.date: 08/30/2010
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 24CN62WW
  dmi.board.name: Caucasus2
  dmi.board.vendor: LENOVO
  dmi.board.version: Rev 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Lenovo
  dmi.chassis.version: Rev 1.0
  dmi.modalias: 
dmi:bvnLENOVO:bvr24CN62WW:bd08/30/2010:svnLENOVO:pn20040M18:pvrLenovoIdeapadS10-3t:rvnLENOVO:rnCaucasus2:rvrRev1.0:cvnLenovo:ct10:cvrRev1.0:
  dmi.product.name: 20040M18
  dmi.product.version: Lenovo Ideapad S10-3t
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1097519/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226039] [NEW] frequency of gpu hangs increased dramatically over the weekend

2013-09-16 Thread Nick Moffitt

Public bug reported:

I am somewhat used to having GPU lockups hang X for me maybe once a
week.  I've followed a few vague bugs on the problem, but over the past
weekend this has grown to every couple of hours.

Easy ways to trigger it: changing workspaces too quickly while there is
disk activity, or letting the screensaver go into power saving mode on
the screen.  The last one requires a hard reboot and I end up with the
screen in a very dim state after the boot.

Have a kern.log, if it helps.

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: xorg 1:7.7+1ubuntu4
ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8
Uname: Linux 3.8.0-31-generic x86_64
.tmp.unity.support.test.0:
 
ApportVersion: 2.9.2-0ubuntu8.4
Architecture: amd64
CompizPlugins: 
[core,bailer,detection,composite,opengl,decor,snap,gnomecompat,grid,regex,mousepoll,compiztoolbox,resize,move,wall,animation,vpswitch,place,imgpng,workarounds,expo,fade,ezoom,session,scale,unityshell]
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
Date: Mon Sep 16 14:03:35 2013
DistUpgraded: 2013-03-19 10:32:34,118 ERROR got an error from dpkg for pkg: 
'/var/cache/apt/archives/python-novaclient_1%3a2.11.1-0ubuntu1_all.deb': 
'subprocess new pre-removal script returned error exit status 1'
DistroCodename: raring
DistroVariant: ubuntu
EcryptfsInUse: Yes
ExtraDebuggingInterest: Yes
GraphicsCard:
 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller 
[8086:2a42] (rev 07) (prog-if 00 [VGA controller])
   Subsystem: Lenovo Device [17aa:20e4]
   Subsystem: Lenovo Device [17aa:20e4]
MachineType: LENOVO 7465CTO
MarkForUpload: True
ProcKernelCmdLine: root=UUID=5237fceb-23d0-412d-84d9-b8f8b3bf28af ro quiet 
splash
SourcePackage: xorg
UpgradeStatus: Upgraded to raring on 2013-03-19 (181 days ago)
dmi.bios.date: 06/25/2009
dmi.bios.vendor: LENOVO
dmi.bios.version: 6DET55WW (3.05 )
dmi.board.name: 7465CTO
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvr6DET55WW(3.05):bd06/25/2009:svnLENOVO:pn7465CTO:pvrThinkPadX200s:rvnLENOVO:rn7465CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 7465CTO
dmi.product.version: ThinkPad X200s
dmi.sys.vendor: LENOVO
version.compiz: compiz 1:0.9.9~daily13.06.19~13.04-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.43-0ubuntu1.1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.4-0ubuntu0.1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.4-0ubuntu0.1
version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu6.1
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.6-0ubuntu4.1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.7-0ubuntu1
xserver.bootTime: Mon Sep 16 13:31:40 2013
xserver.configfile: /etc/X11/xorg.conf
xserver.errors:
 
xserver.logfile: /var/log/Xorg.0.log
xserver.version: 2:1.13.3-0ubuntu6.1
xserver.video_driver: intel

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 raring third-party-packages ubuntu

** Attachment added: kern.log
   https://bugs.launchpad.net/bugs/1226039/+attachment/3823690/+files/kern.log

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1226039

Title:
  frequency of gpu hangs increased dramatically over the weekend

Status in “xorg” package in Ubuntu:
  New

Bug description:
  I am somewhat used to having GPU lockups hang X for me maybe once a
  week.  I've followed a few vague bugs on the problem, but over the
  past weekend this has grown to every couple of hours.

  Easy ways to trigger it: changing workspaces too quickly while there
  is disk activity, or letting the screensaver go into power saving mode
  on the screen.  The last one requires a hard reboot and I end up with
  the screen in a very dim state after the boot.

  Have a kern.log, if it helps.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: xorg 1:7.7+1ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8
  Uname: Linux 3.8.0-31-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.9.2-0ubuntu8.4
  Architecture: amd64
  CompizPlugins: 
[core,bailer,detection,composite,opengl,decor,snap,gnomecompat,grid,regex,mousepoll,compiztoolbox,resize,move,wall,animation,vpswitch,place,imgpng,workarounds,expo,fade,ezoom,session,scale,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Mon Sep 16

[Desktop-packages] [Bug 1157318] Re: Login error in CUPS when adding a printer (or other admin procedure)

Rob, note that you are using Digest authentication (DefaultAuthType
BasicDigest) this form of authentication does not use the system
passwords but requires to set up its own passwords with the lppasswd
command. For using system passwords you must switch to Basic
authentication (DefaultAuthType Basic). Please do not forgrt to
restart CUPS after editing cupsd.conf.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1157318

Title:
  Login error in CUPS when adding a printer (or other admin procedure)

Status in “cups” package in Ubuntu:
  Fix Released

Bug description:
  Using Raring (13.04):

  When you go to http://localhost:631 to do admin tasks in cups, and
  enter your login details, the system keep asking the user/password in
  a loop.

  In the cups log:
  E [19/Mar/2013:18:20:10 +0100] [Client 17] pam_authenticate() returned 4 
(System error)
  E [19/Mar/2013:18:20:42 +0100] [Client 16] pam_authenticate() returned 4 
(System error)
  E [19/Mar/2013:18:20:49 +0100] [Client 15] pam_authenticate() returned 4 
(System error)

  In the auth log no info.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1157318/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1125011] Re: screen save still active after being disabled

2013-09-16 Thread fyo

This appears fixed (in that the idle-delay is correctly set) after
applying today's updates to 13.10 daily. The combobox still does
defaults to showing Never.

That is, selecting Never now changes the idle-delay value to 0, as
expected.

The patch set contained updates to gnome-control-center
(3.6.3-0ubuntu37) as well as gnome-settings-daemon (3.8.5-0ubuntu3).
None of the changes stand out as likely candidates, so I'm unable to
explain what fixed the issue for me.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1125011

Title:
  screen save still active after being disabled

Status in “gnome-control-center” package in Ubuntu:
  Confirmed

Bug description:
  On a remote machine, no keyboard or mouse connected. Set up to auto
  login and start a browser in kiosk mode as a monitoring dash board for
  our office.

  The only way to enable this to run for the whole day is to connect a
  keyboard and break out of the screen save when it first runs. After
  that it will not go into the screen saver for the rest of the day.

  all settings  brightness  lock 
     Turn screen off when inactive  for: never

     lock : off

  all settings  power 
     suspend when inactive for : don't suspend 

  I have tried using different values for like 1 hour

  all settings  brightness  lock 
     Turn screen off when inactive  for: 1 hour

  After 10 minutes monitor goes blank, as if Turn screen off when
  inactive: 10 min is set.

  I have tried
  xset -dpms
  xset s off

  current xset after clean boot

  xset -q
  Keyboard Control:
    auto repeat:  onkey click percent:  0LED mask:  
    XKB indicators:
  00: Caps Lock:   off01: Num Lock:off02: Scroll Lock: off
  03: Compose: off04: Kana:off05: Sleep:   off
  06: Suspend: off07: Mute:off08: Misc:off
  09: Mail:off10: Charging:off11: Shift Lock:  off
  12: Group 2: off13: Mouse Keys:  off
    auto repeat delay:  500repeat rate:  33
    auto repeating keys:  00ffdbbf
  fadfffefffed
  9fff
  fff7
    bell percent:  50bell pitch:  400bell duration:  100
  Pointer Control:
    acceleration:  7/2threshold:  1
  Screen Saver:
    prefer blanking:  yesallow exposures:  yes
    timeout:  0cycle:  0
  Colors:
    default colormap:  0x20BlackPixel:  0WhitePixel:  16777215
  Font Path:
    
/usr/share/fonts/X11/misc,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,built-ins
  DPMS (Energy Star):
    Standby: 0Suspend: 0Off: 0
    DPMS is Disabled

  I end up issue the following command remotely to get the monitor back on. 
Which will only work for 10 minutes till it blacks out again.
  sudo service lightdm restart

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-control-center 1:3.4.2-0ubuntu0.8
  ProcVersionSignature: Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2
  Uname: Linux 3.5.0-23-generic i686
  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: i386
  Date: Thu Feb 14 11:20:14 2013
  InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 
(20120817.3)
  MarkForUpload: True
  SourcePackage: gnome-control-center
  UpgradeStatus: No upgrade log present (probably fresh install)
  usr_lib_gnome-control-center:
   activity-log-manager-control-center 0.9.4-0ubuntu3.2
   deja-dup22.0-0ubuntu2
   gnome-bluetooth 3.2.2-0ubuntu5
   indicator-datetime  0.3.94-0ubuntu2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1125011/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 949988] Re: Unity reacts to left side touch even though set to top left corner.

2013-09-16 Thread Ryan P.C. McQuen

** Changed in: unity-2d (Ubuntu)
   Status: New = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-2d in Ubuntu.
Matching subscriptions: dp-unity2d
https://bugs.launchpad.net/bugs/949988

Title:
  Unity reacts to left side touch even though set to top left corner.

Status in “unity-2d” package in Ubuntu:
  Fix Released

Bug description:
  This only happens on one of the two computers I have Ubuntu on.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-2d/+bug/949988/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226062] [NEW] package libreoffice-style-tango 1:4.0.1-0ubuntu2 failed to install/upgrade: el subproceso dpkg-deb --control devolvió el código de salida de error 2

2013-09-16 Thread erian04

Public bug reported:

When updating the system, installed the package-stile-tango libreoffice
1:4.0.1-0ubuntu2 failed to start the installation. Output message:
invalid file signature.

ProblemType: Package
DistroRelease: Ubuntu 13.04
Package: libreoffice-style-tango 1:4.0.2-0ubuntu1
ProcVersionSignature: Ubuntu 3.8.0-15.25-generic 3.8.4
Uname: Linux 3.8.0-15-generic x86_64
ApportVersion: 2.9.2-0ubuntu8.3
Architecture: amd64
Date: Mon Sep 16 10:35:10 2013
DuplicateSignature: package:libreoffice-style-tango:1:4.0.1-0ubuntu2:el 
subproceso dpkg-deb --control devolvió el código de salida de error 2
ErrorMessage: el subproceso dpkg-deb --control devolvió el código de salida de 
error 2
MarkForUpload: True
PackageArchitecture: all
SourcePackage: libreoffice
Title: package libreoffice-style-tango 1:4.0.1-0ubuntu2 failed to 
install/upgrade: el subproceso dpkg-deb --control devolvió el código de salida 
de error 2
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: libreoffice (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package gnome3-ppa raring third-party-packages

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1226062

Title:
  package libreoffice-style-tango 1:4.0.1-0ubuntu2 failed to
  install/upgrade: el subproceso dpkg-deb --control devolvió el código
  de salida de error 2

Status in “libreoffice” package in Ubuntu:
  New

Bug description:
  When updating the system, installed the package-stile-tango
  libreoffice 1:4.0.1-0ubuntu2 failed to start the installation. Output
  message: invalid file signature.

  ProblemType: Package
  DistroRelease: Ubuntu 13.04
  Package: libreoffice-style-tango 1:4.0.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.8.0-15.25-generic 3.8.4
  Uname: Linux 3.8.0-15-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  Date: Mon Sep 16 10:35:10 2013
  DuplicateSignature: package:libreoffice-style-tango:1:4.0.1-0ubuntu2:el 
subproceso dpkg-deb --control devolvió el código de salida de error 2
  ErrorMessage: el subproceso dpkg-deb --control devolvió el código de salida 
de error 2
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: libreoffice
  Title: package libreoffice-style-tango 1:4.0.1-0ubuntu2 failed to 
install/upgrade: el subproceso dpkg-deb --control devolvió el código de salida 
de error 2
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1226062/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1101816] Re: #define MIN_ICONSIZE 32.0 should be changed to 8.0

2013-09-16 Thread Didier Roche

IIRC, this is a design request to not be able to, with default panel,
resize under the defined minimal size (even if the code supports more).
You can get in touch to confirm that with JohnLea on IRC (freenode),
like on #ubuntu-desktop.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center-unity in Ubuntu.
https://bugs.launchpad.net/bugs/1101816

Title:
  #define MIN_ICONSIZE 32.0 should be changed to 8.0

Status in “gnome-control-center-unity” package in Ubuntu:
  In Progress

Bug description:
  It's been approved, enabled  available in ccsm, no reason not to have
  in Appearances panel

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: gnome-control-center-unity 1.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.8.0-1.5-generic 3.8.0-rc4
  Uname: Linux 3.8.0-1-generic x86_64
  ApportVersion: 2.8-0ubuntu2
  Architecture: amd64
  Date: Sat Jan 19 10:50:49 2013
  InstallationDate: Installed on 2012-12-28 (21 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20121228)
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center-unity
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center-unity/+bug/1101816/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226063] [NEW] fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

2013-09-16 Thread ibrahim Beytekin

*** This bug is a duplicate of bug 1225532 ***
https://bugs.launchpad.net/bugs/1225532

Public bug reported:

when I try to install fglrx I encounter with this error message

ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: fglrx 2:8.960-0ubuntu1.1
ProcVersionSignature: Ubuntu 3.8.0-30.44~precise1-generic 3.8.13.6
Uname: Linux 3.8.0-30-generic x86_64
ApportVersion: 2.0.1-0ubuntu17.4
Architecture: amd64
DKMSBuildLog:
 DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
 Mon Sep 16 16:50:28 EEST 2013
 AMD kernel module generator version 2.1
 kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
 file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
DKMSKernelVersion: 3.8.0-30-generic
Date: Mon Sep 16 16:50:38 2013
DistUpgraded: Fresh install
DistroCodename: precise
DistroVariant: ubuntu
DuplicateSignature:
 DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
 AMD kernel module generator version 2.1
 kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
 file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
InstallationMedia: Ubuntu-Server 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.2)
MachineType: System manufacturer P5K SE
MarkForUpload: True
PackageVersion: 2:8.960-0ubuntu1.1
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic 
root=/dev/mapper/charm--vg-root ro
SourcePackage: fglrx-installer
Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/19/2007
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0401
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P5K SE
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0401:bd07/19/2007:svnSystemmanufacturer:pnP5KSE:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5KSE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: P5K SE
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer
version.compiz: compiz 1:0.9.7.12-0ubuntu2
version.ia32-libs: ia32-libs 20090808ubuntu36
version.libdrm2: libdrm2 2.4.43-0ubuntu0.0.2
version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.6
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.6
version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.13
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.4
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build3

** Affects: fglrx-installer (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package precise running-unity ubuntu

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/1226063

Title:
  fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

Status in “fglrx-installer” package in Ubuntu:
  New

Bug description:
  when I try to install fglrx I encounter with this error message

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: fglrx 2:8.960-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.8.0-30.44~precise1-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  DKMSBuildLog:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   Mon Sep 16 16:50:28 EEST 2013
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  DKMSKernelVersion: 3.8.0-30-generic
  Date: Mon Sep 16 16:50:38 2013
  DistUpgraded: Fresh install
  DistroCodename: precise
  DistroVariant: ubuntu
  DuplicateSignature:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  InstallationMedia: Ubuntu-Server 12.04.3 LTS Precise Pangolin - Release 
amd64 (20130820.2)
  MachineType: System manufacturer P5K SE
  MarkForUpload: True
  PackageVersion: 2:8.960-0ubuntu1.1
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic 
root=/dev/mapper/charm--vg-root ro
  SourcePackage: fglrx-installer
  Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build
  UpgradeStatus: No upgrade log present (probably

[Desktop-packages] [Bug 1226062] Re: package libreoffice-style-tango 1:4.0.1-0ubuntu2 failed to install/upgrade: el subproceso dpkg-deb --control devolvió el código de salida de error 2

2013-09-16 Thread Apport retracing service

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1226062

Title:
  package libreoffice-style-tango 1:4.0.1-0ubuntu2 failed to
  install/upgrade: el subproceso dpkg-deb --control devolvió el código
  de salida de error 2

Status in “libreoffice” package in Ubuntu:
  New

Bug description:
  When updating the system, installed the package-stile-tango
  libreoffice 1:4.0.1-0ubuntu2 failed to start the installation. Output
  message: invalid file signature.

  ProblemType: Package
  DistroRelease: Ubuntu 13.04
  Package: libreoffice-style-tango 1:4.0.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.8.0-15.25-generic 3.8.4
  Uname: Linux 3.8.0-15-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  Date: Mon Sep 16 10:35:10 2013
  DuplicateSignature: package:libreoffice-style-tango:1:4.0.1-0ubuntu2:el 
subproceso dpkg-deb --control devolvió el código de salida de error 2
  ErrorMessage: el subproceso dpkg-deb --control devolvió el código de salida 
de error 2
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: libreoffice
  Title: package libreoffice-style-tango 1:4.0.1-0ubuntu2 failed to 
install/upgrade: el subproceso dpkg-deb --control devolvió el código de salida 
de error 2
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1226062/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225532] Re: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: fglrx-installer (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/1225532

Title:
  fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

Status in “fglrx-installer” package in Ubuntu:
  Confirmed

Bug description:
  Driver didn't install

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: fglrx 2:8.960-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.8.0-30.44~precise1-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  NonfreeKernelModules: fglrx
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  DKMSBuildLog:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   Sat Sep 14 17:07:44 EDT 2013
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  DKMSKernelVersion: 3.8.0-30-generic
  Date: Sat Sep 14 17:07:49 2013
  DistUpgraded: Fresh install
  DistroCodename: precise
  DistroVariant: ubuntu
  DkmsStatus: fglrx, 8.960: added
  DuplicateSignature:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8400] [1002:9830] 
(prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0800]
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  JockeyStatus:
   xorg:fglrx_experimental_13 - ATI/AMD proprietary FGLRX graphics driver 
(**experimental** beta) (Proprietary, Disabled, Not in use)
   xorg:fglrx_updates - ATI/AMD proprietary FGLRX graphics driver (post-release 
updates) (Proprietary, Disabled, Not in use)
  MachineType: Gateway DX4375G
  MarkForUpload: True
  PackageVersion: 2:8.960-0ubuntu1.1
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-30-generic 
root=UUID=9996542a-eb74-40b1-83f1-f6d7a4b68d44 ro quiet splash vt.handoff=7
  SourcePackage: fglrx-installer
  Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build
  UnitySupportTest: Error: command ['/usr/lib/nux/unity_support_test', '-p', 
'-f'] failed with exit code -11:
  UpgradeStatus: No upgrade log present (probably fresh install)
  XorgConf:
   Section Module
Loadglx
   EndSection
  dmi.bios.date: 04/24/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P11-A1
  dmi.board.name: DX4375G
  dmi.board.vendor: Gateway
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gateway
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP11-A1:bd04/24/2013:svnGateway:pnDX4375G:pvr:rvnGateway:rnDX4375G:rvr:cvnGateway:ct3:cvr:
  dmi.product.name: DX4375G
  dmi.sys.vendor: Gateway
  make.log:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   Sat Sep 14 17:07:44 EDT 2013
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  version.compiz: compiz 1:0.9.7.12-0ubuntu2
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.43-0ubuntu0.0.2
  version.libgl1-mesa-dri: libgl1-mesa-dri N/A
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.xserver-xorg-core: xserver-xorg-core N/A
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1225532/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 760344] Re: gvfsd-http not closing tcp connections

** Changed in: gvfs
   Status: Confirmed = Invalid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/760344

Title:
  gvfsd-http not closing tcp connections

Status in GVFS:
  Invalid
Status in “gvfs” package in Ubuntu:
  Fix Committed
Status in “gvfs” source package in Precise:
  Triaged
Status in “gvfs” source package in Quantal:
  Triaged

Bug description:
  Binary package hint: gvfs

  How to recreate the bug...

  Run Rhythmbox, and enable the context pane + album art, and lyrics for
  good measure as well. Close the plugins windows that pops up, click on
  the new icon next to the Ubuntu One Music store and your new window
  should show up. The context pane is great for me, as I love to know
  what I can about the music I listen to. Rhythmbox, through gvfsd-http
  has now fetched all your cool text from last.fm about your artist, but
  it does not close the connection. These connections stay in close_wait
  till you kill the gvfsd-http process.

  this happens any time gvfsd-http is used. 
  netstat -a |grep tcp 

  tcp1  0 farva:47729 10x.terra.com.br:www
CLOSE_WAIT 
  tcp1  0 farva:35961 5b.29.78ae.static.t:www 
CLOSE_WAIT 
  tcp1  0 farva:36086 5b.29.78ae.static.t:www 
CLOSE_WAIT 
  tcp1  0 farva:42357 10x.terra.com.br:www
CLOSE_WAIT 
  tcp0  0 farva:47836 64.208.5.34:www 
ESTABLISHED
  tcp1  0 farva:42219 10x.terra.com.br:www
CLOSE_WAIT 
  tcp1  0 farva:46945 5b.29.78ae.static.t:www 
CLOSE_WAIT 
  tcp1  0 farva:36126 5b.29.78ae.static.t:www 
CLOSE_WAIT 
  tcp1  0 farva:59815 64.208.5.24:www 
CLOSE_WAIT 
  tcp0  0 farva:24800 wabothlp0282996.gs:6776 
ESTABLISHED
  tcp1  0 farva:36021 5b.29.78ae.static.t:www 
CLOSE_WAIT 
  tcp0  0 farva:37285 64.208.5.26:www 
ESTABLISHED
  tcp1  0 farva:33204 64.208.5.34:www 
CLOSE_WAIT 
  tcp1  0 farva:36007 5b.29.78ae.static.t:www 
CLOSE_WAIT 
  tcp1  0 farva:53431 10x.terra.com.br:www
CLOSE_WAIT 
  tcp1  0 farva:35975 5b.29.78ae.static.t:www 
CLOSE_WAIT 
  tcp1  0 farva:59027 5b.29.78ae.static.t:www 
CLOSE_WAIT 
  tcp1  0 farva:47637 10x.terra.com.br:www
CLOSE_WAIT 
  tcp1  0 farva:58324 207.114.197.87:www  
CLOSE_WAIT 
  tcp 5131  0 farva:42165 10x.terra.com.br:wwwCLOSE_WAIT

  gvfsd-htt 1795   josh   18r IPv4  30730  0t0
TCP farva:54963-10x.terra.com.br:www (CLOSE_WAIT)
  gvfsd-htt 1795   josh   19u IPv4  38478  0t0
TCP farva:39645-5b.29.78ae.static.theplanet.com:www (CLOSE_WAIT)
  gvfsd-htt 1795   josh   22u IPv4  23139  0t0
TCP farva:39074-5b.29.78ae.static.theplanet.com:www (CLOSE_WAIT)
  gvfsd-htt 1795   josh   24u IPv4  19766  0t0
TCP farva:42176-10x.terra.com.br:www (CLOSE_WAIT)
  gvfsd-htt 1795   josh   25u sock0,6  0t0  
19650 can't identify protocol
  gvfsd-htt 1795   josh   26u IPv4  19607  0t0
TCP farva:35892-5b.29.78ae.static.theplanet.com:www (CLOSE_WAIT)
  gvfsd-htt 1795   josh   27u IPv4  20164  0t0
TCP farva:42219-10x.terra.com.br:www (CLOSE_WAIT)
  gvfsd-htt 1795   josh   29u IPv4  38494  0t0
TCP farva:51584-10x.terra.com.br:www (CLOSE_WAIT)
  gvfsd-htt 1795   josh   30u sock0,6  0t0  
23195 can't identify protocol
  gvfsd-htt 1795   josh   31u sock0,6  0t0  
20157 can't identify protocol

  I posted a form message about this too 
  http://ubuntuforums.org/showthread.php?p=10646961#post10646961

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/760344/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226063] Re: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

2013-09-16 Thread Apport retracing service

*** This bug is a duplicate of bug 1225532 ***
https://bugs.launchpad.net/bugs/1225532

Thank you for taking the time to report this crash and helping to make
this software better.  This particular crash has already been reported
and is a duplicate of bug #1225532, so is being marked as such.  Please
look at the other bug report to see if there is any missing information
that you can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** Tags removed: need-duplicate-check

** This bug has been marked a duplicate of bug 1225532
   fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/1226063

Title:
  fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

Status in “fglrx-installer” package in Ubuntu:
  New

Bug description:
  when I try to install fglrx I encounter with this error message

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: fglrx 2:8.960-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.8.0-30.44~precise1-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  DKMSBuildLog:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   Mon Sep 16 16:50:28 EEST 2013
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  DKMSKernelVersion: 3.8.0-30-generic
  Date: Mon Sep 16 16:50:38 2013
  DistUpgraded: Fresh install
  DistroCodename: precise
  DistroVariant: ubuntu
  DuplicateSignature:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  InstallationMedia: Ubuntu-Server 12.04.3 LTS Precise Pangolin - Release 
amd64 (20130820.2)
  MachineType: System manufacturer P5K SE
  MarkForUpload: True
  PackageVersion: 2:8.960-0ubuntu1.1
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic 
root=/dev/mapper/charm--vg-root ro
  SourcePackage: fglrx-installer
  Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/19/2007
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 0401
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P5K SE
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0401:bd07/19/2007:svnSystemmanufacturer:pnP5KSE:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5KSE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: P5K SE
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer
  version.compiz: compiz 1:0.9.7.12-0ubuntu2
  version.ia32-libs: ia32-libs 20090808ubuntu36
  version.libdrm2: libdrm2 2.4.43-0ubuntu0.0.2
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.4-0ubuntu0.6
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.4-0ubuntu0.6
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.13
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4.4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1226063/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225532] Re: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

2013-09-16 Thread lynda scheidt

** Changed in: fglrx-installer (Ubuntu)
   Status: Confirmed = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/1225532

Title:
  fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build

Status in “fglrx-installer” package in Ubuntu:
  Fix Released

Bug description:
  Driver didn't install

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: fglrx 2:8.960-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.8.0-30.44~precise1-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  NonfreeKernelModules: fglrx
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  DKMSBuildLog:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   Sat Sep 14 17:07:44 EDT 2013
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  DKMSKernelVersion: 3.8.0-30-generic
  Date: Sat Sep 14 17:07:49 2013
  DistUpgraded: Fresh install
  DistroCodename: precise
  DistroVariant: ubuntu
  DkmsStatus: fglrx, 8.960: added
  DuplicateSignature:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8400] [1002:9830] 
(prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0800]
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  JockeyStatus:
   xorg:fglrx_experimental_13 - ATI/AMD proprietary FGLRX graphics driver 
(**experimental** beta) (Proprietary, Disabled, Not in use)
   xorg:fglrx_updates - ATI/AMD proprietary FGLRX graphics driver (post-release 
updates) (Proprietary, Disabled, Not in use)
  MachineType: Gateway DX4375G
  MarkForUpload: True
  PackageVersion: 2:8.960-0ubuntu1.1
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-30-generic 
root=UUID=9996542a-eb74-40b1-83f1-f6d7a4b68d44 ro quiet splash vt.handoff=7
  SourcePackage: fglrx-installer
  Title: fglrx 2:8.960-0ubuntu1.1: fglrx kernel module failed to build
  UnitySupportTest: Error: command ['/usr/lib/nux/unity_support_test', '-p', 
'-f'] failed with exit code -11:
  UpgradeStatus: No upgrade log present (probably fresh install)
  XorgConf:
   Section Module
Loadglx
   EndSection
  dmi.bios.date: 04/24/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P11-A1
  dmi.board.name: DX4375G
  dmi.board.vendor: Gateway
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gateway
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP11-A1:bd04/24/2013:svnGateway:pnDX4375G:pvr:rvnGateway:rnDX4375G:rvr:cvnGateway:ct3:cvr:
  dmi.product.name: DX4375G
  dmi.sys.vendor: Gateway
  make.log:
   DKMS make.log for fglrx-8.960 for kernel 3.8.0-30-generic (x86_64)
   Sat Sep 14 17:07:44 EDT 2013
   AMD kernel module generator version 2.1
   kernel includes at /lib/modules/3.8.0-30-generic/build/include not found or 
incomplete
   file: /lib/modules/3.8.0-30-generic/build/include/linux/version.h
  version.compiz: compiz 1:0.9.7.12-0ubuntu2
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.43-0ubuntu0.0.2
  version.libgl1-mesa-dri: libgl1-mesa-dri N/A
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.xserver-xorg-core: xserver-xorg-core N/A
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1225532/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1163687] Re: Impossible to insert non-Latin characters or diacritics with the keyboard

2013-09-16 Thread lynda scheidt

** Changed in: ubuntu-ui-toolkit
   Status: Confirmed = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to friends in Ubuntu.
https://bugs.launchpad.net/bugs/1163687

Title:
  Impossible to insert non-Latin characters or diacritics with the
  keyboard

Status in Ubuntu UI Toolkit:
  Fix Released
Status in “friends” package in Ubuntu:
  Invalid
Status in “friends-app” package in Ubuntu:
  Invalid
Status in “qtbase-opensource-src” package in Ubuntu:
  Fix Committed

Bug description:
  1. Have the new QML Gwibber open, with a Twitter account set up, and go to 
compose mode.
  2. Have the English (International) keyboard layout, so you can insert 
accents by pressing the ['] key and a letter.
  3. Try to write the word ortografía.

  In the text box, what appears is ortograf´ia, instead of
  ortografía.

  See the attached screenshot.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-ui-toolkit/+bug/1163687/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1221014] Re: LibreOffice 4.1.x does not start without libsolve installed

2013-09-16 Thread Harry

Actually, I did not write LibreOffice_4.1 does not start ONLY in Gnome-shell DE.
I did not test it in any other DE, so I did not make other claims either.
In fact, I only use Gnome-shell.

As to this bug.
The correct solution is to rebuild libreoffice-writer to depend on lpsolve.


** Summary changed:

- LibreOffice 4.1.x does not start without libreoffice-calc installed
+ LibreOffice 4.1.x does not start without libsolve installed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1221014

Title:
  LibreOffice 4.1.x does not start without libsolve installed

Status in “libreoffice” package in Ubuntu:
  New

Bug description:
  The latest LibreOffice (versions 4.1.0-2ubuntu1 and 4.1.1-0ubuntu1) do not 
start in the Gnome-shell DE.
  I have three different setups (one desktop with NVidia, one with ATI and one 
laptop with Intel),
  all with Saucy development distro with no additional PPA's enabled.
  LibreOfiice 4.1.x works in none of them.

  For example LibreOffice Writer just does not start at all.
  The cursor spins for a few seconds, then nothing.
  Sometimes I can see the LibreOffice starting logo and then nothing.

  However, downgrading to the previous Saucy version 4.0.2-0ubuntu5
  helps, and all is well again.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1221014/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226071] [NEW] Maguro: NM indicator says I have 3g, browser says can't find homepage

2013-09-16 Thread Dave Morley

Public bug reported:

Background:
This is an ongoing bug that has had various parts fixed but this is still and 
issue on maguro for some (it also appears that the maguro network stack is a 
bit meh)

The nm-indicator says everything is conected I see the strength bar and
3g on the indicator, however when I open the browser there is no
connection.

To get a fresh daily build I doing the following:
phablet-flash ubuntu-system --channel=daily-proposed --no-backup

I am adding my syslog to the bug it should have the additional nm logs
as I set RW on the image added --log-level=DEBUG to the exec line in
/etc/init/network-manager.conf  then re-enabled the RO mode on the
image.

Steps:
1. Flash the maguro with the phablet-flash command above
2. Ensure 3g is displayed
3. Open the browser

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1226071

Title:
  Maguro: NM indicator says I have 3g, browser says can't find homepage

Status in “network-manager” package in Ubuntu:
  New

Bug description:
  Background:
  This is an ongoing bug that has had various parts fixed but this is still and 
issue on maguro for some (it also appears that the maguro network stack is a 
bit meh)

  The nm-indicator says everything is conected I see the strength bar
  and 3g on the indicator, however when I open the browser there is no
  connection.

  To get a fresh daily build I doing the following:
  phablet-flash ubuntu-system --channel=daily-proposed --no-backup

  I am adding my syslog to the bug it should have the additional nm logs
  as I set RW on the image added --log-level=DEBUG to the exec line in
  /etc/init/network-manager.conf  then re-enabled the RO mode on the
  image.

  Steps:
  1. Flash the maguro with the phablet-flash command above
  2. Ensure 3g is displayed
  3. Open the browser

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1226071/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226071] Re: Maguro: NM indicator says I have 3g, browser says can't find homepage

2013-09-16 Thread Dave Morley

** Attachment added: syslog
   
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1226071/+attachment/3823846/+files/syslog

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1226071

Title:
  Maguro: NM indicator says I have 3g, browser says can't find homepage

Status in “network-manager” package in Ubuntu:
  New

Bug description:
  Background:
  This is an ongoing bug that has had various parts fixed but this is still and 
issue on maguro for some (it also appears that the maguro network stack is a 
bit meh)

  The nm-indicator says everything is conected I see the strength bar
  and 3g on the indicator, however when I open the browser there is no
  connection.

  To get a fresh daily build I doing the following:
  phablet-flash ubuntu-system --channel=daily-proposed --no-backup

  I am adding my syslog to the bug it should have the additional nm logs
  as I set RW on the image added --log-level=DEBUG to the exec line in
  /etc/init/network-manager.conf  then re-enabled the RO mode on the
  image.

  Steps:
  1. Flash the maguro with the phablet-flash command above
  2. Ensure 3g is displayed
  3. Open the browser

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1226071/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1203052] Re: [ICH4 - Intel 82801DB-ICH4, playback] No sound at all after upgrade to Raring (13.04)

2013-09-16 Thread Rüdiger Kupper

Of which version would you need the verbose log? 12.04 (the last that
works), or 12.10 (the first that doesn't)?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1203052

Title:
  [ICH4 - Intel 82801DB-ICH4, playback] No sound at all after upgrade to
  Raring (13.04)

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  After upgrade from 12.04 LTS to 13.04, I have no sound on my Intel 
82801DB-ICH4.
  Identical installation running on another machine with another chipset has 
sound, so the problem must be specific to the  Intel 82801DB-ICH4 chip.
  What can I do?

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
  Uname: Linux 3.8.0-26-generic i686
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  linadmin   2006 F pulseaudio
  Date: Fri Jul 19 15:22:17 2013
  InstallationDate: Installed on 2011-12-14 (582 days ago)
  InstallationMedia: Edubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:I82801DBICH4 
failed
  Symptom_Card: Internes Audio - Intel 82801DB-ICH4
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  linadmin   2006 F pulseaudio
  Symptom_Type: No sound at all
  Title: [ICH4 - Intel 82801DB-ICH4, playback] No sound at all
  UpgradeStatus: Upgraded to raring on 2013-06-13 (35 days ago)
  dmi.bios.date: 05/22/2003
  dmi.bios.vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
  dmi.bios.version: 4.06  Rev. 1.06.1521
  dmi.board.name: D1521
  dmi.board.vendor: FUJITSU SIEMENS
  dmi.board.version: S26361-D1521
  dmi.chassis.asset.tag: YBEM220283
  dmi.chassis.type: 6
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.chassis.version: SCEP
  dmi.modalias: 
dmi:bvnFUJITSUSIEMENS//PhoenixTechnologiesLtd.:bvr4.06Rev.1.06.1521:bd05/22/2003:svnFUJITSUSIEMENS:pnSCENICP300:pvr:rvnFUJITSUSIEMENS:rnD1521:rvrS26361-D1521:cvnFUJITSUSIEMENS:ct6:cvrSCEP:
  dmi.product.name: SCENIC P300
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1203052/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1216921] Re: util.ignore_missing() does not work

2013-09-16 Thread Matthias Witte

Ok, checked it:

TMPDIR='/BACKUP/.duplytemp' PASSPHRASE= SIGN_PASSPHRASE=YOURSIGN_PASSPHRASE 
FTP_PASSWORD=YOUR_FTP_PASSWORD pydb /usr/bin/duplicity --archive-dir 
'/BACKUP/.duplycache' --name 'duply_foo' --encrypt-key DEADBEEF0 --sign-key 
DEADBEEF1 --verbosity '5' --gpg-options '--trust-model always 
--compress-algo=zip --compress-level=1' --volsize 100 --full-if-older-than 1M 
--exclude-globbing-filelist /root/.duply/foo/exclude /DATA0 
ftp://ftpu...@yourftp.bar/foo/
(Pydb) b duplicity/path:567
(Pydb) c
...
(/usr/share/pyshared/duplicity/path.py:567):  delete
567 util.ignore_missing(os.unlink, self.name)
(Pydb) p self.name
'/BACKUP/.duplycache/duply_foo/duplicity-new20130916T144629Z.to.20130916T144916Z.sigtar.gpg'

Now remove this file manually and tell the debugger to continue:

(Pydb) c

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
https://bugs.launchpad.net/bugs/1216921

Title:
  util.ignore_missing() does not work

Status in Duplicity - Bandwidth Efficient Encrypted Backup:
  Fix Committed
Status in “duplicity” package in Ubuntu:
  Fix Released
Status in “duplicity” source package in Precise:
  In Progress
Status in “duplicity” source package in Quantal:
  In Progress
Status in “duplicity” source package in Raring:
  In Progress

Bug description:
  duplicity version: 0.6.18-0ubuntu3 
  python version: 2.7.3
  Distro: ubuntu precise 12.04
  target file system: ftp

  I happen to encounter failed backups with tracebacks like this:

  Traceback (most recent call last):
File /usr/bin/duplicity, line 1403, in module
   with_tempdir(main)
File /usr/bin/duplicity, line 1396, in with_tempdir
   fn()
 File /usr/bin/duplicity, line 1366, in main
   full_backup(col_stats)
 File /usr/bin/duplicity, line 504, in full_backup
   sig_outfp.to_remote()
 File /usr/lib/python2.7/dist-packages/duplicity/dup_temp.py, line 184, 
in to_remote
   globals.backend.move(tgt) #@UndefinedVariable
 File /usr/lib/python2.7/dist-packages/duplicity/backend.py, line 364, in 
move
   source_path.delete()
 File /usr/lib/python2.7/dist-packages/duplicity/path.py, line 567, in 
delete
   util.ignore_missing(os.unlink, self.name)
 File /usr/lib/python2.7/dist-packages/duplicity/util.py, line 116, in 
ignore_missing
   fn(filename)
   OSError: [Errno 2] No such file or directory: 
'/BACKUP/.duplycache/duply_foo/duplicity-full-signatures.20130825T140002Z.sigtar.gpg'

  Now running test code like

  #!/usr/bin/env python
  #
  # Do what util.ignore_missing(os.unlink, self.name) tries to do and
  # fails to achieve

  import os
  import sys
  import errno

  if __name__ == __main__:
  try:
  os.unlink(/tmp/doesnotexist)
  except Exception:
  # type is a reserved keyword, replaced with mytype
  mytype, value, tb = sys.exc_info()
  print - * 78
  print mytype: , mytype
  print value: , value
  print value[0]:, value[0]
  print errno.ENOENT: , errno.ENOENT
  print isinstance(mytype, OSError): , isinstance(mytype, 
OSError)
  print - * 78
  if isinstance(mytype, OSError) and value[0] == errno.ENOENT:
  print Gotcha!
  pass
  print Ooops, missed it ...
  raise

  will always raise the exception and not ignore it, because
  isinstance(mytype, OSError) is always False.

  What I expect ignore_missing to look like is:

  def ignore_missing(fn, filename):
  
  Execute fn on filename.  Ignore ENOENT errors, otherwise raise exception.

  @param fn: callable
  @param filename: string
  
  try:
  fn(filename)
  except OSError, ex:
  if ex.errno == errno.ENOENT:
      pass
      else:
      raise
      else:
      raise

To manage notifications about this bug go to:
https://bugs.launchpad.net/duplicity/+bug/1216921/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1203052] Re: [ICH4 - Intel 82801DB-ICH4, playback] No sound at all after upgrade to Raring (13.04)

2013-09-16 Thread Rüdiger Kupper

Raymond,
first of all: thanks for helping!

I must admit I do not fully understand your comment in #7. Although I
feel quite confident with my understanding of Linux, I am not a pulse
developer. Can you explain what would be the steps to remove the mono
playback volume from the driver or you remove the mono path in
pulseaudio conf?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1203052

Title:
  [ICH4 - Intel 82801DB-ICH4, playback] No sound at all after upgrade to
  Raring (13.04)

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  After upgrade from 12.04 LTS to 13.04, I have no sound on my Intel 
82801DB-ICH4.
  Identical installation running on another machine with another chipset has 
sound, so the problem must be specific to the  Intel 82801DB-ICH4 chip.
  What can I do?

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
  Uname: Linux 3.8.0-26-generic i686
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  linadmin   2006 F pulseaudio
  Date: Fri Jul 19 15:22:17 2013
  InstallationDate: Installed on 2011-12-14 (582 days ago)
  InstallationMedia: Edubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:I82801DBICH4 
failed
  Symptom_Card: Internes Audio - Intel 82801DB-ICH4
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  linadmin   2006 F pulseaudio
  Symptom_Type: No sound at all
  Title: [ICH4 - Intel 82801DB-ICH4, playback] No sound at all
  UpgradeStatus: Upgraded to raring on 2013-06-13 (35 days ago)
  dmi.bios.date: 05/22/2003
  dmi.bios.vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
  dmi.bios.version: 4.06  Rev. 1.06.1521
  dmi.board.name: D1521
  dmi.board.vendor: FUJITSU SIEMENS
  dmi.board.version: S26361-D1521
  dmi.chassis.asset.tag: YBEM220283
  dmi.chassis.type: 6
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.chassis.version: SCEP
  dmi.modalias: 
dmi:bvnFUJITSUSIEMENS//PhoenixTechnologiesLtd.:bvr4.06Rev.1.06.1521:bd05/22/2003:svnFUJITSUSIEMENS:pnSCENICP300:pvr:rvnFUJITSUSIEMENS:rnD1521:rvrS26361-D1521:cvnFUJITSUSIEMENS:ct6:cvrSCEP:
  dmi.product.name: SCENIC P300
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1203052/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1203052] Re: [ICH4 - Intel 82801DB-ICH4, playback] No sound at all after upgrade to Raring (13.04)

if your computer does not use the mono pin for any output

http://www.alsa-project.org/~tiwai/alsa-driver-api/re86.html

define a new quirkAC97_REMOVE_MASTER_MONO to remove master mono playback 
volume and switch for
snd_ac97_tune_hardware in ac97_codec.c


snd_ac97_remove_ctl(ac97, Master Mono Playback, Switch);
snd_ac97_remove_ctl(ac97, Master Mono Playback, Volume);


Advanced information - PCI Vendor/Device/Subsystem ID's
!!

00:1f.5 0401: 8086:24c5 (rev 01)
Subsystem: 1734:0088



add your PCI subvendor , subdevice, name and the new quirk type to ac97_quirks  
in intel8x0.c

static struct ac97_quirk ac97_quirks[] = {
{
.subvendor = 0x1734,
.subdevice = 0x0088,
.name = Fujitsy SCENIC P300,  
.type = AC97_REMOVE_MASTER_MONO
},

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1203052

Title:
  [ICH4 - Intel 82801DB-ICH4, playback] No sound at all after upgrade to
  Raring (13.04)

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  After upgrade from 12.04 LTS to 13.04, I have no sound on my Intel 
82801DB-ICH4.
  Identical installation running on another machine with another chipset has 
sound, so the problem must be specific to the  Intel 82801DB-ICH4 chip.
  What can I do?

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
  Uname: Linux 3.8.0-26-generic i686
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  linadmin   2006 F pulseaudio
  Date: Fri Jul 19 15:22:17 2013
  InstallationDate: Installed on 2011-12-14 (582 days ago)
  InstallationMedia: Edubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:I82801DBICH4 
failed
  Symptom_Card: Internes Audio - Intel 82801DB-ICH4
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  linadmin   2006 F pulseaudio
  Symptom_Type: No sound at all
  Title: [ICH4 - Intel 82801DB-ICH4, playback] No sound at all
  UpgradeStatus: Upgraded to raring on 2013-06-13 (35 days ago)
  dmi.bios.date: 05/22/2003
  dmi.bios.vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
  dmi.bios.version: 4.06  Rev. 1.06.1521
  dmi.board.name: D1521
  dmi.board.vendor: FUJITSU SIEMENS
  dmi.board.version: S26361-D1521
  dmi.chassis.asset.tag: YBEM220283
  dmi.chassis.type: 6
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.chassis.version: SCEP
  dmi.modalias: 
dmi:bvnFUJITSUSIEMENS//PhoenixTechnologiesLtd.:bvr4.06Rev.1.06.1521:bd05/22/2003:svnFUJITSUSIEMENS:pnSCENICP300:pvr:rvnFUJITSUSIEMENS:rnD1521:rvrS26361-D1521:cvnFUJITSUSIEMENS:ct6:cvrSCEP:
  dmi.product.name: SCENIC P300
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1203052/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226101] [NEW] 12.04.3 Nvidia 340 driver results in text only login

You have been subscribed to a public bug:

Installing Nvidia 340 driver in a fresh install of MythBuntu 12.04.2
works OK, but doing the same thing in 12.04.3 results in text only login
on restart.

** Affects: mythbuntu
 Importance: Undecided
 Status: New

** Affects: nvidia-graphics-drivers (Ubuntu)
 Importance: Undecided
 Status: New

-- 
12.04.3 Nvidia 340 driver results in text only login 
https://bugs.launchpad.net/bugs/1226101
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1203052] Re: [ICH4 - Intel 82801DB-ICH4, playback] No sound at all after upgrade to Raring (13.04)

the alternative is to remove

[Element Master Mono] from
http://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/src/modules/alsa/mixer/paths
/analog-output-mono.conf

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1203052

Title:
  [ICH4 - Intel 82801DB-ICH4, playback] No sound at all after upgrade to
  Raring (13.04)

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  After upgrade from 12.04 LTS to 13.04, I have no sound on my Intel 
82801DB-ICH4.
  Identical installation running on another machine with another chipset has 
sound, so the problem must be specific to the  Intel 82801DB-ICH4 chip.
  What can I do?

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
  Uname: Linux 3.8.0-26-generic i686
  ApportVersion: 2.9.2-0ubuntu8.1
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  linadmin   2006 F pulseaudio
  Date: Fri Jul 19 15:22:17 2013
  InstallationDate: Installed on 2011-12-14 (582 days ago)
  InstallationMedia: Edubuntu 11.10 Oneiric Ocelot - Release i386 (20111012)
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:I82801DBICH4 
failed
  Symptom_Card: Internes Audio - Intel 82801DB-ICH4
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  linadmin   2006 F pulseaudio
  Symptom_Type: No sound at all
  Title: [ICH4 - Intel 82801DB-ICH4, playback] No sound at all
  UpgradeStatus: Upgraded to raring on 2013-06-13 (35 days ago)
  dmi.bios.date: 05/22/2003
  dmi.bios.vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
  dmi.bios.version: 4.06  Rev. 1.06.1521
  dmi.board.name: D1521
  dmi.board.vendor: FUJITSU SIEMENS
  dmi.board.version: S26361-D1521
  dmi.chassis.asset.tag: YBEM220283
  dmi.chassis.type: 6
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.chassis.version: SCEP
  dmi.modalias: 
dmi:bvnFUJITSUSIEMENS//PhoenixTechnologiesLtd.:bvr4.06Rev.1.06.1521:bd05/22/2003:svnFUJITSUSIEMENS:pnSCENICP300:pvr:rvnFUJITSUSIEMENS:rnD1521:rvrS26361-D1521:cvnFUJITSUSIEMENS:ct6:cvrSCEP:
  dmi.product.name: SCENIC P300
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1203052/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1184451] Re: Ubuntu 13.10 random screen freeze while Normal OS activites

2013-09-16 Thread OliWare

same here with latest kernel 3.11.0-7-generic
I can do CTRL-ALT-F6 CTRL-ALT-F7 and it works again, but really annoying, can't 
find anything helpfull in Xorg.0.log or syslog

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1184451

Title:
  Ubuntu 13.10 random screen freeze while Normal OS activites

Status in “xorg-server” package in Ubuntu:
  Confirmed

Bug description:
  I have recently, re-installed fresh ubuntu 13.10 distribution release.
  But everything worked fine. until recently i had strange problem of my 
display screen getting freezed randomly; but no response to either 
mouse/keyboard.
  But i want to point it out; it happens randomly and is not specific ?
  Other day, i had music player playing in background, but screen freezed. but 
my music was still running. 
  Kindly note, i used multiple monitor setup and same issue of screen freeze 
also cropped up.

  I,am not sure, whether it is bug ?

  thanks for the expertise support.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1184451/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1222670] Re: [nVidia GTX645][10de:11c4] Unable to boot to desktop with nvidia-319 driver

This bug was fixed in the package nvidia-graphics-drivers-319-updates -
319.49-0ubuntu1

---
nvidia-graphics-drivers-319-updates (319.49-0ubuntu1) saucy; urgency=low

  * debian/templates/nvidia-graphics-drivers.{links|links32}.in:
- Create links for the new NvIFROpenGL library.
  * debian/additional_card_ids:
- Remove card id 11C4 which is now officially supported.
  * New upstream release (LP: #1219908, LP: #1222670):
- Added support for the following GPUs:
  o GeForce GT 740A
  o GeForce GT 745A
  o GeForce GT 755M
  o GeForce GT 625
  o GeForce GTX 645
  o GRID K340
  o GRID K350
  o NVS 315
  o Quadro K500M
   - Fixed a bug that caused DisplayPort monitors connected
 to Quadro FX 3800, 4800, or 5800 to remain off after
 DPMS.
   - Added the NVIDIA OpenGL-based Inband Frame Readback
 (NvIFROpenGL) library to the Linux driver package.
 This library provides a high performance, low latency
 interface to capture and optionally encode an
 individual OpenGL framebuffer. NvIFROpenGL captures
 pixels rendered by OpenGL only and is ideally suited
 to application capture and remoting.
   - Fixed a bug that caused applications using CUDA-GL
 interop to crash when run on X servers with Xinerama
 enabled.
   - Fixed a bug that could prevent some double-bit ECC
 errors from being properly reported.
   - Fixed a bug which could cause a blank screen when
 changing house sync settings on Quadro Kepler GPUs
 with Quadro Sync boards.
   - Fixed a bug that prevented nested loops with
 identical loop conditions in GLSL shaders from
 terminating correctly. This could cause hangs in
 applications such as Exa PowerVIZ.
   - Fixed a bug that resulted in corrupt texels when a
 previously empty texture image was specified with
 glXBindTexImageEXT. In GNOME 3, this caused
 gnome-screenshot to produce garbled window
 screenshots.
   - Fixed a bug that caused the X server to crash when
 querying the current mode of disabled displays.
 -- Alberto Milone alberto.mil...@canonical.com   Mon, 16 Sep 2013 17:35:57 
+0200

** Changed in: nvidia-graphics-drivers-319-updates (Ubuntu)
   Status: In Progress = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-319-updates in
Ubuntu.
https://bugs.launchpad.net/bugs/1222670

Title:
  [nVidia GTX645][10de:11c4] Unable to boot to desktop with nvidia-319
  driver

Status in “nvidia-graphics-drivers-319” package in Ubuntu:
  Triaged
Status in “nvidia-graphics-drivers-319-updates” package in Ubuntu:
  Fix Released
Status in “nvidia-graphics-drivers-319” source package in Precise:
  Triaged
Status in “nvidia-graphics-drivers-319-updates” source package in Precise:
  Triaged

Bug description:
  CID: 201303-13031 Dell Alienware X51

  According to bug 1199342, this video card should be supported by 
nvidia-graphics-drivers-319.
  But it can't boot to desktop with nvidia-319 / nvidia-319-updates driver.

  Steps:
  1. Install 12.04.3, boot to desktop.
  2. Install the proprietary nvidia-319 video driver via jockey.
  3. Reboot.

  Expected results:
  1. System should be able to boot to desktop with the proprietary driver.

  Actual results:
  1. Unable to boot to destop, the screen is totally black (screen won't enter 
idle mode). But I can still access this system via ssh.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: nvidia-319 319.32-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  Uname: Linux 3.8.0-29-generic x86_64
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  Date: Mon Sep  9 02:01:57 2013
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: nvidia-graphics-drivers-319
  UpgradeStatus: No upgrade log present (probably fresh install)
  modified.conffile..etc.modprobe.d.nvidia.319.hybrid.conf: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-319/+bug/1222670/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1219908] Re: [needs-packaging] All nvidia-current and nvidia-updates need repackaging to mirror official Nvidia releases...

This bug was fixed in the package nvidia-graphics-drivers-319-updates -
319.49-0ubuntu1

---
nvidia-graphics-drivers-319-updates (319.49-0ubuntu1) saucy; urgency=low

  * debian/templates/nvidia-graphics-drivers.{links|links32}.in:
- Create links for the new NvIFROpenGL library.
  * debian/additional_card_ids:
- Remove card id 11C4 which is now officially supported.
  * New upstream release (LP: #1219908, LP: #1222670):
- Added support for the following GPUs:
  o GeForce GT 740A
  o GeForce GT 745A
  o GeForce GT 755M
  o GeForce GT 625
  o GeForce GTX 645
  o GRID K340
  o GRID K350
  o NVS 315
  o Quadro K500M
   - Fixed a bug that caused DisplayPort monitors connected
 to Quadro FX 3800, 4800, or 5800 to remain off after
 DPMS.
   - Added the NVIDIA OpenGL-based Inband Frame Readback
 (NvIFROpenGL) library to the Linux driver package.
 This library provides a high performance, low latency
 interface to capture and optionally encode an
 individual OpenGL framebuffer. NvIFROpenGL captures
 pixels rendered by OpenGL only and is ideally suited
 to application capture and remoting.
   - Fixed a bug that caused applications using CUDA-GL
 interop to crash when run on X servers with Xinerama
 enabled.
   - Fixed a bug that could prevent some double-bit ECC
 errors from being properly reported.
   - Fixed a bug which could cause a blank screen when
 changing house sync settings on Quadro Kepler GPUs
 with Quadro Sync boards.
   - Fixed a bug that prevented nested loops with
 identical loop conditions in GLSL shaders from
 terminating correctly. This could cause hangs in
 applications such as Exa PowerVIZ.
   - Fixed a bug that resulted in corrupt texels when a
 previously empty texture image was specified with
 glXBindTexImageEXT. In GNOME 3, this caused
 gnome-screenshot to produce garbled window
 screenshots.
   - Fixed a bug that caused the X server to crash when
 querying the current mode of disabled displays.
 -- Alberto Milone alberto.mil...@canonical.com   Mon, 16 Sep 2013 17:35:57 
+0200

** Changed in: nvidia-graphics-drivers-319-updates (Ubuntu)
   Status: In Progress = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-304 in Ubuntu.
https://bugs.launchpad.net/bugs/1219908

Title:
  [needs-packaging] All nvidia-current and nvidia-updates need
  repackaging to mirror official Nvidia releases...

Status in Nvidia Feature Request and Bug Reporting:
  New
Status in “nvidia-graphics-drivers-304” package in Ubuntu:
  Confirmed
Status in “nvidia-graphics-drivers-319-updates” package in Ubuntu:
  Fix Released
Status in “nvidia-graphics-drivers-304” source package in Precise:
  New
Status in “nvidia-graphics-drivers-319-updates” source package in Precise:
  Triaged

Bug description:
  The official Nvidia long-lived-branch stable driver is now 319.49.
  That means that the recommended official driver is 319.49 and should
  be used by all Nvidia users except those using old legacy devices.
  There are important fixes that are in this driver and the previous
  319.17 that affect Chromium browser users especially:

  + Fixed a memory leak that occurred when destroying a GLX window but
  not its associated X window.

  These can crash machines using Nvidia GPU's according to a Chromium-
  bug http://crbug.com/145600 NVIDIA linux drivers are unstable when
  using multiple Open GL contexts and with low memory.: and if check
  `about:gpu` you will see this is a major reason most if not all Nvidia
  GPU's are currently blacklisted.

  Also, when using Windows 7 I am at liberty to install any driver
  version I want, keeping my machine up to date with the latest official
  Nvidia fixes.  With Ubuntu I'm stuck with older drivers that affect
  performance and contain old bugs that have already been fixed.  This
  leads to a lower quality experience than with Windows.  Drivers need
  to be kept current with upstream in my opinion.  For the time being I
  have been cherry-picking *.deb packages from X-Org-Edgers so that I
  can replicate that Windows experience and it's been working.  However,
  all Ubuntu users should have this experience as well and most do not
  know how to manually install packages using DPKG so it is out of their
  reach.

  The current Nvidia driver versions are as follows:
  http://www.nvidia.com/object/unix.html

  Long Lived Branch version: 319.49 -- `nvidia-current` should be here as 
stable
  Short Lived Branch version: 325.15 -- `nvidia-updates` should be here as 
unstable
  Legacy GPU version (304.xx series): 304.108 -- `nvidia-current-legacy` 
should be here.

  This situation has to be solved, Ubuntu cannot be so far behind the
  curve that it cannot keep Nvidia drivers fresh and in sync with the
  upstream Nvidia release schedule...

To manage

[Desktop-packages] [Bug 1225789] Re: [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

2013-09-16 Thread Alex Santos

Hello

…which version of Ubuntu desktop did not suffer from this issue?

I would like to ask a short question. I understand that this issue does
not enjoy an immediate resolution and I sincerely appreciate that there
are good hard working people looking into this.

In the meantime, I would be grateful if any one delegated to this issue
could perhaps let me know which version of Ubuntu desktop did not suffer
from this issue. I am happy to downgrade on a second partition.
Unfortunately for me, sound is one of the reasons I installed Ubuntu,

I hope you can understand and again, I am much obliged to all your
attention.

With kindest regards
Alex Santos

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1225789

Title:
   [FUJITSU AMILO La1703 audio playback] Audio volume extremely low

Status in “alsa-driver” package in Ubuntu:
  Confirmed
Status in Gentoo Linux:
  Won't Fix

Bug description:
  Hello

  Please note: Bug #1225622 reports a similar issue against the same
  hardware but diffirent Ubuntu software. Additionally, the said bug
  reports issues related to no sound. Due to symptoms and Ubuntu
  versions differing I am creating this report.

  I will add as much detail as possible. Please contact me if there are
  steps that I can take to facilitate further.

  Symptoms:
  After a full clean install there was one symptom, very low sound volume that 
I could detect with headphones. The fans on this system plus other ambient 
sound made it difficult to confirm if the same volume of sound was being 
emitted by the speaker.

  The Sound System Settings displayed both the internal speaker and
  headphone as Play Sound Through. I would have to do an erase and
  install of the said OS to verify this with 100% accuracy or startup
  from the live CD. As quite some time has been exhausted trying to
  workaround the issue I can't make this claim with complete accuracy.

  Workarounds:
  Followed Installation Instructions at 
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS and applied 
oem-audio-hda-daily-lts-raring-dkms_0.201309132333~ubuntu12.04.1_all.deb (302.4 
KiB) as per 
https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+packages.

  Interstingly, the above workaround created a secondary issue, Ubuntu
  Software Center continuosly quit unexpectedly while running a spinng
  gear of cogwheel.  I can't verify if it the secondary issue that I
  mentioning here is completely related but the error messages would
  certainly suggest it. I recovered out of it by following the first
  bullet point in http://askubuntu.com/questions/233389/how-can-i-fix-
  errors-relating-to-the-launch-of-the-software-center

  After fixing the secondary issue with Ubuntu Software Center, I
  restarted and launched  Sound System Settings but the Output tab
  display nothing in the list. If I plug headphones into the respective
  jack, the following appears under the Output tab, Headphones,
  VT8237A/VT8251 HDA Controller. Although the focus of this report is
  audio out volume leve, plugging a mic also displays the same in the
  Input tab. The headphones continue to emit sound but it is very low in
  volume, barely audible.

  
  1)
  ~$ lsb_release -rd
  Description:  Ubuntu 12.04.3 LTS
  Release:  12.04

  -Software- fresh install, ~ 2 days
  UBUNTU
  Release 12.04 (precise) 32-bit
  Kernel Linux 3.8.0-30-generic
  GNOME 3.4.2

  As reported in the terminal
  ~$ lspci -v

  00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 8
Memory at d000 (32-bit, prefetchable) [size=128M]
Capabilities: access denied
Kernel driver in use: agpgart-amd64

  00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

  00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
Flags: bus master, medium devsel, latency 0

  00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge 
[K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d800-d8ff
Prefetchable memory behind bridge: c000-cfff

[Desktop-packages] [Bug 674640] Re: Unity should suggest apps to the user according to his hardware

2013-09-16 Thread Alberto Salvia Novella

Thank you for taking the time to make Ubuntu better. Since what you
submitted is not really a bug, or a problem, but rather an idea to
improve Ubuntu, you are invited to post your idea in Ubuntu Brainstorm
at http://brainstorm.ubuntu.com/ where it can be discussed, voted by the
community and reviewed by developers. Thanks for taking the time to
share your opinion!

** Changed in: unity (Ubuntu)
   Status: Confirmed = Invalid

** Changed in: unity
   Status: Confirmed = Invalid

** Changed in: unity (Ubuntu)
   Status: Invalid = Won't Fix

** Changed in: unity (Ubuntu)
   Status: Won't Fix = Invalid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity in Ubuntu.
Matching subscriptions: dp-unity
https://bugs.launchpad.net/bugs/674640

Title:
  Unity should suggest apps to the user according to his hardware

Status in Unity:
  Invalid
Status in “unity” package in Ubuntu:
  Invalid

Bug description:
  A nice feature for unity may be the ability to suggest applications to the 
user.
  A common case is when the user connect a specific hardware to the system.

  Scenarios:
  1. A user connect a webcam : Suggest using cheese
  2. A user connect a digitizer : Suggest using Gimp/Inkscape and may open a 
tutorial of how modifying parameters or using the hardware there.
  3. If unity detects a multitouch device, an icon is added (or an existant one 
animates or blinks) and when clicked/hovered it opens the Software center with 
applications suggestion.

  This feature needs to detect the user hardware capabilities and suggest 
according to that.
  It needs also to resolve this Software Center bug:
  https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/674633

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/674640/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226191] UnitySupportTest.txt

2013-09-16 Thread AlexC

apport information

** Attachment added: UnitySupportTest.txt
   
https://bugs.launchpad.net/bugs/1226191/+attachment/3824212/+files/UnitySupportTest.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1226191

Title:
  Brightness Control regression in 3.11 on Thinkpad X230

Status in “xorg-server” package in Ubuntu:
  New

Bug description:
  Brightness control using Fn + F8/F9 has regressed from the 3.8 kernel
  used in 13.04.

  Expected:

  9 levels of brightness adjustment using Function Keys

  Experienced:

  5 levels of brightness adjustment with blank levels with blank
  levels where a key press results in no brightness change even though
  indicator showed change.

  Regression proved by reverting to 3.8 kernel resulting in expected
  behaviour.

  Software:

  13.10 i386 beta (Upgraded from 13.04)

  Hardware:

  Lenovo Thinkpad X230
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: i386
  CompizPlugins: 
[core,bailer,detection,composite,opengl,compiztoolbox,decor,imgpng,move,grid,resize,unitymtgrabhandles,vpswitch,regex,mousepoll,place,gnomecompat,snap,animation,expo,wall,ezoom,session,fade,scale,workarounds,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: 2013-09-15 23:42:20,315 DEBUG enabling apt cron job
  DistroCodename: saucy
  DistroRelease: Ubuntu 13.10
  DistroVariant: ubuntu
  DkmsStatus:
   vboxhost, 4.2.12, 3.11.0-7-generic, i686: installed
   vboxhost, 4.2.12, 3.8.0-29-generic, i686: installed
  EcryptfsInUse: Yes
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:21fa]
  InstallationDate: Installed on 2012-03-20 (544 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: LENOVO 2325AEG
  MarkForUpload: True
  Package: xorg-server (not installed)
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic 
root=UUID=7b7b41ce-ce89-42c9-b8fd-406c62bb040e ro quiet splash pcie_aspm=force 
i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 
i915.semaphores=1 drm.vblankoffdelay=1 vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Tags:  saucy ubuntu regression single-occurrence reproducible compiz-0.9
  Uname: Linux 3.11.0-7-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-15 (0 days ago)
  UserGroups: adm admin cdrom debian-tor dialout lpadmin plugdev sambashare
  dmi.bios.date: 02/22/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G2ET92WW (2.52 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 2325AEG
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG2ET92WW(2.52):bd02/22/2013:svnLENOVO:pn2325AEG:pvrThinkPadX230:rvnLENOVO:rn2325AEG:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 2325AEG
  dmi.product.version: ThinkPad X230
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.10+13.10.20130828.2-0ubuntu1
  version.libdrm2: libdrm2 2.4.46-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.2-1ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental 
9.2-1ubuntu1
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.2-1ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.14.2.901-2ubuntu4
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu6
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.14-4ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.9-2ubuntu1
  xserver.bootTime: Mon Sep 16 19:20:25 2013
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id 728 
   vendor LGD
  xserver.version: 2:1.14.2.901-2ubuntu4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1226191/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226141] Re: evince reports apparmor denials

2013-09-16 Thread Tyler Hicks

AppArmor denial from the accessibility dbus-daemon:

dbus[2835]: apparmor=DENIED operation=dbus_method_call
bus=accessibility name=org.freedesktop.DBus
path=/org/freedesktop/DBus interface=org.freedesktop.DBus
member=Hello mask=send pid=14848 profile=/usr/bin/evince
peer_profile=unconfined

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/1226141

Title:
  evince reports apparmor denials

Status in “evince” package in Ubuntu:
  Triaged

Bug description:
  % evince foo.pdf

  ** (evince:26162): WARNING **: Couldn't register with accessibility
  bus: An AppArmor policy prevents this sender from sending this message
  to this recipient, 0 matched rules; type=method_call,
  sender=(null) (inactive) interface=org.freedesktop.DBus
  member=Hello error name=(unset) requested_reply=0
  destination=org.freedesktop.DBus (bus)

  (evince:26162): EvinceDocument-CRITICAL **: ev_document_get_n_pages:
  assertion 'EV_IS_DOCUMENT (document)' failed

  %

  more errors occur if I print the document.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1226141/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226191] XorgLog.txt

2013-09-16 Thread AlexC

apport information

** Attachment added: XorgLog.txt
   
https://bugs.launchpad.net/bugs/1226191/+attachment/3824213/+files/XorgLog.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1226191

Title:
  Brightness Control regression in 3.11 on Thinkpad X230

Status in “xorg-server” package in Ubuntu:
  New

Bug description:
  Brightness control using Fn + F8/F9 has regressed from the 3.8 kernel
  used in 13.04.

  Expected:

  9 levels of brightness adjustment using Function Keys

  Experienced:

  5 levels of brightness adjustment with blank levels with blank
  levels where a key press results in no brightness change even though
  indicator showed change.

  Regression proved by reverting to 3.8 kernel resulting in expected
  behaviour.

  Software:

  13.10 i386 beta (Upgraded from 13.04)

  Hardware:

  Lenovo Thinkpad X230
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: i386
  CompizPlugins: 
[core,bailer,detection,composite,opengl,compiztoolbox,decor,imgpng,move,grid,resize,unitymtgrabhandles,vpswitch,regex,mousepoll,place,gnomecompat,snap,animation,expo,wall,ezoom,session,fade,scale,workarounds,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: 2013-09-15 23:42:20,315 DEBUG enabling apt cron job
  DistroCodename: saucy
  DistroRelease: Ubuntu 13.10
  DistroVariant: ubuntu
  DkmsStatus:
   vboxhost, 4.2.12, 3.11.0-7-generic, i686: installed
   vboxhost, 4.2.12, 3.8.0-29-generic, i686: installed
  EcryptfsInUse: Yes
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:21fa]
  InstallationDate: Installed on 2012-03-20 (544 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: LENOVO 2325AEG
  MarkForUpload: True
  Package: xorg-server (not installed)
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic 
root=UUID=7b7b41ce-ce89-42c9-b8fd-406c62bb040e ro quiet splash pcie_aspm=force 
i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 
i915.semaphores=1 drm.vblankoffdelay=1 vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Tags:  saucy ubuntu regression single-occurrence reproducible compiz-0.9
  Uname: Linux 3.11.0-7-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-15 (0 days ago)
  UserGroups: adm admin cdrom debian-tor dialout lpadmin plugdev sambashare
  dmi.bios.date: 02/22/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G2ET92WW (2.52 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 2325AEG
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG2ET92WW(2.52):bd02/22/2013:svnLENOVO:pn2325AEG:pvrThinkPadX230:rvnLENOVO:rn2325AEG:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 2325AEG
  dmi.product.version: ThinkPad X230
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.10+13.10.20130828.2-0ubuntu1
  version.libdrm2: libdrm2 2.4.46-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.2-1ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental 
9.2-1ubuntu1
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.2-1ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.14.2.901-2ubuntu4
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu6
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.14-4ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.9-2ubuntu1
  xserver.bootTime: Mon Sep 16 19:20:25 2013
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id 728 
   vendor LGD
  xserver.version: 2:1.14.2.901-2ubuntu4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1226191/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226191] xdpyinfo.txt

2013-09-16 Thread AlexC

apport information

** Attachment added: xdpyinfo.txt
   
https://bugs.launchpad.net/bugs/1226191/+attachment/3824216/+files/xdpyinfo.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1226191

Title:
  Brightness Control regression in 3.11 on Thinkpad X230

Status in “xorg-server” package in Ubuntu:
  New

Bug description:
  Brightness control using Fn + F8/F9 has regressed from the 3.8 kernel
  used in 13.04.

  Expected:

  9 levels of brightness adjustment using Function Keys

  Experienced:

  5 levels of brightness adjustment with blank levels with blank
  levels where a key press results in no brightness change even though
  indicator showed change.

  Regression proved by reverting to 3.8 kernel resulting in expected
  behaviour.

  Software:

  13.10 i386 beta (Upgraded from 13.04)

  Hardware:

  Lenovo Thinkpad X230
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.12.1-0ubuntu4
  Architecture: i386
  CompizPlugins: 
[core,bailer,detection,composite,opengl,compiztoolbox,decor,imgpng,move,grid,resize,unitymtgrabhandles,vpswitch,regex,mousepoll,place,gnomecompat,snap,animation,expo,wall,ezoom,session,fade,scale,workarounds,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: 2013-09-15 23:42:20,315 DEBUG enabling apt cron job
  DistroCodename: saucy
  DistroRelease: Ubuntu 13.10
  DistroVariant: ubuntu
  DkmsStatus:
   vboxhost, 4.2.12, 3.11.0-7-generic, i686: installed
   vboxhost, 4.2.12, 3.8.0-29-generic, i686: installed
  EcryptfsInUse: Yes
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:21fa]
  InstallationDate: Installed on 2012-03-20 (544 days ago)
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: LENOVO 2325AEG
  MarkForUpload: True
  Package: xorg-server (not installed)
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic 
root=UUID=7b7b41ce-ce89-42c9-b8fd-406c62bb040e ro quiet splash pcie_aspm=force 
i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 
i915.semaphores=1 drm.vblankoffdelay=1 vt.handoff=7
  ProcVersionSignature: Ubuntu 3.11.0-7.13-generic 3.11.0
  Tags:  saucy ubuntu regression single-occurrence reproducible compiz-0.9
  Uname: Linux 3.11.0-7-generic i686
  UpgradeStatus: Upgraded to saucy on 2013-09-15 (0 days ago)
  UserGroups: adm admin cdrom debian-tor dialout lpadmin plugdev sambashare
  dmi.bios.date: 02/22/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G2ET92WW (2.52 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 2325AEG
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG2ET92WW(2.52):bd02/22/2013:svnLENOVO:pn2325AEG:pvrThinkPadX230:rvnLENOVO:rn2325AEG:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 2325AEG
  dmi.product.version: ThinkPad X230
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.10+13.10.20130828.2-0ubuntu1
  version.libdrm2: libdrm2 2.4.46-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.2-1ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental 
9.2-1ubuntu1
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.2-1ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.14.2.901-2ubuntu4
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu6
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.14-4ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.9-2ubuntu1
  xserver.bootTime: Mon Sep 16 19:20:25 2013
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id 728 
   vendor LGD
  xserver.version: 2:1.14.2.901-2ubuntu4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1226191/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1222670] Re: [nVidia GTX645][10de:11c4] Unable to boot to desktop with nvidia-319 driver

** Branch linked: lp:ubuntu/saucy-proposed/nvidia-graphics-
drivers-319-updates

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-319-updates in
Ubuntu.
https://bugs.launchpad.net/bugs/1222670

Title:
  [nVidia GTX645][10de:11c4] Unable to boot to desktop with nvidia-319
  driver

Status in “nvidia-graphics-drivers-319” package in Ubuntu:
  Triaged
Status in “nvidia-graphics-drivers-319-updates” package in Ubuntu:
  In Progress
Status in “nvidia-graphics-drivers-319” source package in Precise:
  Triaged
Status in “nvidia-graphics-drivers-319-updates” source package in Precise:
  Triaged

Bug description:
  CID: 201303-13031 Dell Alienware X51

  According to bug 1199342, this video card should be supported by 
nvidia-graphics-drivers-319.
  But it can't boot to desktop with nvidia-319 / nvidia-319-updates driver.

  Steps:
  1. Install 12.04.3, boot to desktop.
  2. Install the proprietary nvidia-319 video driver via jockey.
  3. Reboot.

  Expected results:
  1. System should be able to boot to desktop with the proprietary driver.

  Actual results:
  1. Unable to boot to destop, the screen is totally black (screen won't enter 
idle mode). But I can still access this system via ssh.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: nvidia-319 319.32-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5
  Uname: Linux 3.8.0-29-generic x86_64
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  Date: Mon Sep  9 02:01:57 2013
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: nvidia-graphics-drivers-319
  UpgradeStatus: No upgrade log present (probably fresh install)
  modified.conffile..etc.modprobe.d.nvidia.319.hybrid.conf: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-319/+bug/1222670/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1226141] Re: evince reports apparmor denials

2013-09-16 Thread LaMont Jones

In response to ctl-P:

** (evince:26301): WARNING **: Couldn't connect to D-Bus system bus,
GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy
prevents this sender from sending this message to this recipient, 0
matched rules; type=method_call, sender=(null) (inactive)
interface=org.freedesktop.DBus member=Hello error name=(unset)
requested_reply=0 destination=org.freedesktop.DBus (bus)

** (evince:26301): WARNING **: failed to contact colord:
GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy
prevents this sender from sending this message to this recipient, 0
matched rules; type=method_call, sender=(null) (inactive)
interface=org.freedesktop.DBus member=Hello error name=(unset)
requested_reply=0 destination=org.freedesktop.DBus (bus)

** (evince:26301): WARNING **: failed to contact colord:
GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy
prevents this sender from sending this message to this recipient, 0
matched rules; type=method_call, sender=(null) (inactive)
interface=org.freedesktop.DBus member=Hello error name=(unset)
requested_reply=0 destination=org.freedesktop.DBus (bus)

** (evince:26301): WARNING **: failed to contact colord:
GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy
prevents this sender from sending this message to this recipient, 0
matched rules; type=method_call, sender=(null) (inactive)
interface=org.freedesktop.DBus member=Hello error name=(unset)
requested_reply=0 destination=org.freedesktop.DBus (bus)

** (evince:26301): WARNING **: failed to contact colord:
GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy
prevents this sender from sending this message to this recipient, 0
matched rules; type=method_call, sender=(null) (inactive)
interface=org.freedesktop.DBus member=Hello error name=(unset)
requested_reply=0 destination=org.freedesktop.DBus (bus)

** (evince:26301): WARNING **: failed to contact colord:
GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy
prevents this sender from sending this message to this recipient, 0
matched rules; type=method_call, sender=(null) (inactive)
interface=org.freedesktop.DBus member=Hello error name=(unset)
requested_reply=0 destination=org.freedesktop.DBus (bus)

** (evince:26301): WARNING **: failed to contact colord:
GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy
prevents this sender from sending this message to this recipient, 0
matched rules; type=method_call, sender=(null) (inactive)
interface=org.freedesktop.DBus member=Hello error name=(unset)
requested_reply=0 destination=org.freedesktop.DBus (bus)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/1226141

Title:
  evince reports apparmor denials

Status in “evince” package in Ubuntu:
  Triaged

Bug description:
  % evince foo.pdf

  ** (evince:26162): WARNING **: Couldn't register with accessibility
  bus: An AppArmor policy prevents this sender from sending this message
  to this recipient, 0 matched rules; type=method_call,
  sender=(null) (inactive) interface=org.freedesktop.DBus
  member=Hello error name=(unset) requested_reply=0
  destination=org.freedesktop.DBus (bus)

  (evince:26162): EvinceDocument-CRITICAL **: ev_document_get_n_pages:
  assertion 'EV_IS_DOCUMENT (document)' failed

  %

  more errors occur if I print the document.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1226141/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1225320] Re: Unresolved symbol in savage_drv.so