[Desktop-packages] [Bug 1218322] Re: Can't set keyboard layout change to alt+shift, ctrl+shift, etc.
Ubuntu 14.04 Gnome 3.10 I have 3 layouts, can't switch between them, not with shortcuts and not with choosing the language in the indicator. Sometimes it works to switch between two layouts, sometimes not. This is a terrible bug for people using multiple layouts on a daily work basis. Unfortunately have decided to revert back to 12.04 until this is confirmed to be fixed. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1218322 Title: Can't set keyboard layout change to alt+shift, ctrl+shift, etc. Status in Gnome Settings Daemon: Invalid Status in Ubuntu GNOME: Confirmed Status in “gnome-control-center” package in Ubuntu: Fix Released Status in “gnome-settings-daemon” package in Ubuntu: Triaged Status in “gnome-settings-daemon” source package in Saucy: Triaged Status in “gnome-control-center” package in ALT Linux: Unknown Status in “gnome-control-center” package in Baltix: Confirmed Status in “gnome-control-center” package in Fedora: Unknown Status in “gnome-control-center” package in Gentoo Linux: Invalid Status in “gnome-control-center” package in Mandriva: Invalid Bug description: *** The old PPA, ppa:attente/1218322 is superceded by the following one. You can remove the old repository using ppa-purge. *** A PPA which should provide some relief for this issue is available at https://launchpad.net/~attente/+archive/modifier-only-input-switch. To install: sudo add-apt-repository ppa:attente/modifier-only-input-switch sudo apt-get update sudo apt-get upgrade (log out, log in) If the packages improve the situation for you, you can pin them using: sudo apt-mark hold compiz sudo apt-mark hold gnome-settings-daemon sudo apt-mark hold unity If the packages don't work for you, you can purge them using: sudo ppa-purge ppa:attente/modifier-only-input-switch === compiz === Impact: modifier-only key bindings need to be independent of key-press order, there's no support for double tapping two modifier keys of the same type Test case: - add at least two input sources through gnome-control-center's text entry settings - use gsettings to set the input switching shortcut to ctrl+left shift: gsettings set org.gnome.desktop.wm.keybindings switch-input-source ['PrimaryShift_L'] - holding left shift, press and release ctrl - the current input source should change Regression potential: possible, but highly unlikely, that some key bindings may be triggered due to the removal of some code that would normally prevent a possible tap from occurring. === unity === Impact: gnome-settings-daemon eats modifier-only shortcuts preventing them from propagating down to applications Test case: - open gnome-control-center's text input settings - set the next input source key binding to ctrl+left shift - open gnome-terminal - press ctrl+shift+t - gnome-terminal should open a new tab Regression potential: the additional input switch key bindings could collide with other functionality such as opening the dash or hud === gnome-control-center === Impact: the UI to change the layout switching keys doesn't work Test case: - open gnome-control-center's text input settings - click on the next layout key entry - try entering a key combinaison (e.g ctrl-space) - the UI should reflect the new keys Regression potential: that UI was not working before, it should only be an improvement (some key combos are not working as expected, that's another issue and shouldn't be mixed with this one) === gnome-settings-daemon === Impact: attempting to change keyboard layouts using only modifier keys doesn't work Test case: - add at least two input sources through gnome-control-center's text entry settings - use gsettings to set the input switching shortcut to ctrl+left shift: gsettings set org.gnome.desktop.wm.keybindings switch-input-source ['PrimaryShift_L'] - press and release ctrl+left shift - the current input source should change Regression potential: The input switching shortcut might capture other non-modifier shortcuts, but users will need to consider this when choosing their switching shortcut anyways. For users this bug affects, this represents a working solution for a critical bug. -- Test results for different keyboard layout change hotkeys may be viewed and added in the Google Docs table, created by Norbert (https://docs.google.com/spreadsheet/ccc?key=0Ao5e713Ig9g_dEJrX2NRYlpLWWVzSWxsVXU4ck9HYVEusp=sharing). -- Recent discovered bugs related to keyboard layouts: * keyboard layout settings must be consistent between gnome-control-center keyboard, indicator-keyboard and gnome-tweak-tool and /etc/default/keyboard (bug 1270574) * Ubuntu 14.04 should have gnome-tweak-tool installed by default
[Desktop-packages] [Bug 1252105] Re: Rhythmbox 2.99.1 crashes, File /usr/lib/rhythmbox/plugins/artsearch/embedded.py, line 38, AttributeError: 'NoneType' object has no attribute 'get_sample'
Thanks nikolajsheller, I tried to add the podcast but the link does not seem to provide a feed, is that the right link for the podcast? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/1252105 Title: Rhythmbox 2.99.1 crashes, File /usr/lib/rhythmbox/plugins/artsearch/embedded.py, line 38, AttributeError: 'NoneType' object has no attribute 'get_sample' Status in “rhythmbox” package in Ubuntu: Incomplete Bug description: I started Rhythmbox and it worked fine until I tried to play a song, at which point it'd freeze. Running it from the terminal I got this traceback. (rhythmbox:12839): GLib-GObject-CRITICAL **: Custom constructor for class SoupServer returned NULL (which is invalid). Unable to remove object from construction_objects list, so memory was probably just leaked. Please use GInitable instead. Unable to open ~/.mtpz-data for reading, MTPZ disabled.Traceback (most recent call last): File /usr/lib/rhythmbox/plugins/artsearch/embedded.py, line 38, in discovered_cb (found, sample) = tags.get_sample(tagname) AttributeError: 'NoneType' object has no attribute 'get_sample' Seems like it might be related to this: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1242806 (Dunno if this is relevant, but just prior I was having some issues with Rhythmbox not able to open /run/user/1000/pulse when trying to play a song. I fixed that by taking the ownership of that directory.) Running Ubuntu 13.10 on an ASUS K53SV laptop, Rhythmbox 2.99.1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1252105/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1283938] Re: Ubuntu 14.04 blank screen after wakeup from sleep
nomodeset as a kernel parameter fix the problem. But, if you use nomodeset then you'll get software 3D acceleration in a clean installation (it seems radeon driver breaks suspend). If you install fglrx (binary blob) then you MUST use nomodeset to disable radeon (open source) driver to load. Then, you'll get hardware 3D acceleration via binary blob. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu. https://bugs.launchpad.net/bugs/1283938 Title: Ubuntu 14.04 blank screen after wakeup from sleep Status in “linux-lts-trusty” package in Ubuntu: Confirmed Status in “nvidia-graphics-drivers-331” package in Ubuntu: Confirmed Status in “xserver-xorg-video-ati” package in Ubuntu: Confirmed Status in “xserver-xorg-video-nouveau” package in Ubuntu: Confirmed Bug description: Hardware: Samsung Serie 5 AMD notebook (find in attachment the hardware profile). OS: Ubuntu 14.04 (updated today). After wakeup the notebook from the sleep mode, the screen goes blank while the OS and the hardware is awake. (I can also press Ctrl+F1 and Ctrl+Alt+Del to reboot the system). This problem is not happening with the AMD property drivers (but they have another bug, i can't set up the brighness of the monitor). The problem in my opinion is related to this package: xserver-xorg- video-ati. Changing quiet splash with nomodeset into /etc/default/grub makes the wakeup working, but the pc is really slow (can't be used), also after the normal start up. Best regards and have a good work. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-video-ati 1:7.3.0-1ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-11.31-generic 3.13.3 Uname: Linux 3.13.0-11-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.13.2-0ubuntu5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon Feb 24 12:58:07 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.6, 3.13.0-11-generic, x86_64: installed GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7500G] [1002:990a] (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c660] Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7550M/7570M/7650M] [1002:6841] (rev ff) (prog-if ff) InstallationDate: Installed on 2014-02-22 (1 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140218) MachineType: SAMSUNG ELECTRONICS CO., LTD. 535U4C ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-11-generic root=UUID=9f8c7e92-a6ea-41fd-9489-a256c8b9f5d5 ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-video-ati UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/03/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06RAF.N93.130403.LEO dmi.board.asset.tag: No Asset Tag dmi.board.name: NP535U4X-S01TH dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SEC_SW_REVISION_1234567890ABCD dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06RAF.N93.130403.LEO:bd04/03/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn535U4C:pvrP06RAF:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP535U4X-S01TH:rvrSEC_SW_REVISION_1234567890ABCD:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 535U4C dmi.product.version: P06RAF dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. version.compiz: compiz 1:0.9.11+14.04.20140218-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0~rc1-1ubuntu4 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0~rc1-1ubuntu4 version.xserver-xorg-core: xserver-xorg-core 2:1.15.0-1ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Mon Feb 24 12:54:54 2014 xserver.configfile: default xserver.errors: RADEON(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.0-1ubuntu6 xserver.video_driver: radeon To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-lts-trusty/+bug/1283938/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages
[Desktop-packages] [Bug 367808] Re: mouse acceleration values smaller than 1 have no effect in Jaunty
This issue is still present in Ubuntu 12.04.4 at least. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to x11-xserver-utils in Ubuntu. https://bugs.launchpad.net/bugs/367808 Title: mouse acceleration values smaller than 1 have no effect in Jaunty Status in “x11-xserver-utils” package in Ubuntu: Expired Bug description: e.g. xset m 1/8 1 or xset m 1/25 1 should make mouse cursor movement on the screen very slow, but instead mouse cursor acts similar if not exactly same as xset m 1 1 the bug does not seem to be hardware specific, Ubuntu 9.04 Jaunty Jackalope --- Architecture: i386 CurrentDmesg: [ 14.077953] ppdev: user-space parallel port driver [ 14.120320] [drm] nouveau :01:00.0: Allocating FIFO number 1 [ 14.121307] [drm] nouveau :01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 22.808018] eth0: no IPv6 routers present [ 51.083535] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold DistroRelease: Ubuntu 10.04 DkmsStatus: Error: [Errno 2] No such file or directory GdmLog: Error: command ['cat', '/var/log/gdm/:0.log'] failed with exit code 1: cat: /var/log/gdm/:0.log: No such file or directory GdmLog1: Error: command ['cat', '/var/log/gdm/:0.log.1'] failed with exit code 1: cat: /var/log/gdm/:0.log.1: No such file or directory GdmLog2: Error: command ['cat', '/var/log/gdm/:0.log.2'] failed with exit code 1: cat: /var/log/gdm/:0.log.2: No such file or directory InstallationMedia: Kubuntu 10.04 LTS Lucid Lynx - Release i386 (20100427) Package: x11-xserver-utils 7.5+1ubuntu2 PackageArchitecture: i386 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=2f203cee-2fb9-435c-92c1-0dad373bb789 ro quiet splash ProcEnviron: LANGUAGE= PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Tags: lucid lucid Uname: Linux 2.6.32-21-generic i686 UserGroups: dmi.bios.date: 09/15/2005 dmi.bios.vendor: Insyde Software Corporation dmi.bios.version: R1.02 dmi.board.vendor: MTC dmi.board.version: A0 dmi.chassis.asset.tag: 12345678 dmi.chassis.type: 10 dmi.chassis.vendor: MTC dmi.chassis.version: A0 dmi.modalias: dmi:bvnInsydeSoftwareCorporation:bvrR1.02:bd09/15/2005:svnMTC:pn:pvrA0:rvnMTC:rn:rvrA0:cvnMTC:ct10:cvrA0: dmi.product.version: A0 dmi.sys.vendor: MTC glxinfo: Error: [Errno 2] No such file or directory system: distro: Ubuntu codename: lucid architecture: i686 kernel: 2.6.32-21-generic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/x11-xserver-utils/+bug/367808/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1226962] Re: Hotkeys not functional in non-latin keyboard layout in 13.10 and 14.04
PPA attente/java-non-latin-shortcuts fixed problem in NetUP UTM 5 client in Ubuntu 14.04 (Unity) for Russian language, but after a while the keyboard input stops working. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-terminal in Ubuntu. https://bugs.launchpad.net/bugs/1226962 Title: Hotkeys not functional in non-latin keyboard layout in 13.10 and 14.04 Status in LibreOffice Productivity Suite: Confirmed Status in IBus: New Status in Indicator keyboard: Fix Released Status in Inkscape: A Vector Drawing Tool: New Status in Mutter: Fix Released Status in The OpenOffice.org Suite: New Status in Unity: Fix Released Status in “gnome-settings-daemon” package in Ubuntu: Triaged Status in “gnome-terminal” package in Ubuntu: Triaged Status in “indicator-keyboard” package in Ubuntu: Triaged Status in “kingsoft-office” package in Ubuntu: Confirmed Status in “openjdk-7” package in Ubuntu: Confirmed Status in “unity” package in Ubuntu: Triaged Status in “unity-settings-daemon” package in Ubuntu: Triaged Status in “gnome-settings-daemon” package in Fedora: Unknown Status in “gnome-shell” package in Fedora: Unknown Bug description: New keyboard layout changer in Ubuntu 13.10 introduce old-new bug. Any system or application hotkey witch use char (for example: ctrl+alt+t for terminal or ctrl+t for new tab in browser) become unfunctional when selected non-latin keyboard layout. Hotkeys with F1-12, numbers and other non-character buttons works perfectly. Window manager hotkeys not affected by this bug. All hotkeys in system parameters-keyboard-hotkeys-windows works perfect with any keyboard layout. Workaround for some system hotkeys and two layouts (english and non- latin): rebind all hotkeys in your local layout. For example instead of ctrl+alt+t use ctrl+alt+τ (greek tau). That hotkey still work with english layout. If you use english and two different non-latin layouts this workaround helps only with one of them. Dear Ubuntu users and developers! Please include the following information to your comment about non-latin shortcuts problems: 1. What Ubuntu version do you have (Ubuntu 13.10, Ubuntu 13.10 GNOME, Ubuntu 14.04, Ubuntu 14.04 GNOME and so on), upgraded (describe version) or clean installed 2. What keyboard layout do you have 3. What shortcut for keyboard layout switching do you use 4. On which session you have problems - that is one from Unity, GNOME Shell, GNOME FlashBack/Fallback (Metacity), GNOME FlashBack/Fallback (Compiz) 5. With which program and its version and origin (Ubuntu repositories, PPA, non-deb binary package from some website) you have problems. By providing this information you can make bug-fixing much simpler and may be faster. -- For other layout switching problems introduced in Ubuntu 13.10 you can see bug 1218322. -- To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1226962/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1013881]
You're kidding ! In France, professional typographists use Macintosh, I fear. And the average French user is not Joe, he's Jean. And I'll write unconstructive sarcasms until I get my Right-Ctrl back ! (Do note the French style space before the exclamation marks) Le 12 mai 2014 07:10, Swâmi Petaramesh 1013...@bugs.launchpad.net a écrit : About a short nbsp in french, let's make it perfectly clear that there must be about a hundred professionnal typographists in the whole country who care about it - most of them not using Linux BTW - and the rest of the ~40 million computer users here don't give a shit about a short nbsp and don't even know what it is, feel perfectly happy with the correct french they write without it, and many of them just would like their fscking right [Ctrl] key back. If a so thin minority of professional typographists that in no way represent the average french Joe user want this modifier, it's perfectly OK that they devise their own special layout for their on needs, but by no means impose it on the rest of us. -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1013881 Title: Right-Ctrl key broken on French OSS keyboard To manage notifications about this bug go to: https://bugs.launchpad.net/xkeyboard-config/+bug/1013881/+subscriptions -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xkeyboard-config in Ubuntu. https://bugs.launchpad.net/bugs/1013881 Title: Right-Ctrl key broken on French OSS keyboard Status in central project for keyboard configuration: Confirmed Status in “xkeyboard-config” package in Ubuntu: Fix Released Status in “xkeyboard-config” source package in Precise: Fix Released Bug description: Since the version 2.5-1ubuntu1.2 of the package xkb-data, the right CTRL key of the keyboard has ceased to work. The problem started when APT has updated the xkd-data from 2.5-1ubuntu1 to 2.5-1ubuntu1.2. If I switch back to 2.5.-1ubuntu1 using Synaptic, it works back. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xkb-data 2.5-1ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-25.40-generic 3.2.18 Uname: Linux 3.2.0-25-generic x86_64 ApportVersion: 2.0.1-0ubuntu9 Architecture: amd64 Date: Sat Jun 16 00:16:09 2012 Dependencies: DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader MachineType: LENOVO 4243E69 PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic root=UUID=f6981326-31fd-4eaf-b039-3a1e5f33dbc0 ro quiet splash vt.handoff=7 SourcePackage: xkeyboard-config UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/06/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 8AET56WW (1.36 ) dmi.board.asset.tag: Not Available dmi.board.name: 4243E69 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8AET56WW(1.36):bd12/06/2011:svnLENOVO:pn4243E69:pvrThinkPadT520:rvnLENOVO:rn4243E69:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4243E69 dmi.product.version: ThinkPad T520 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.7.8-0ubuntu1 version.ia32-libs: ia32-libs 20090808ubuntu36 version.libdrm2: libdrm2 2.4.32-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3.1 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.19.0-0ubuntu1~xup1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build2 To manage notifications about this bug go to: https://bugs.launchpad.net/xkeyboard-config/+bug/1013881/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help :
[Desktop-packages] [Bug 1035701] Re: grilo plugins should be enabled in Totem
MIR was approved so enable grilo support ** Patch added: totem-grilo.debdiff https://bugs.launchpad.net/ubuntu/+source/totem/+bug/1035701/+attachment/4110308/+files/totem-grilo.debdiff -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/1035701 Title: grilo plugins should be enabled in Totem Status in One Hundred Papercuts: Triaged Status in “totem” package in Ubuntu: Triaged Bug description: I see no good reason why they're not. For the most part they all work, any that don't are a grilo bug, (like vimeo), shouldn't affect being enabled. If sticking with 3.4.3/gstreamer .10/grilo 0.1 (0.1.2 is available) it would seem straightforward to enable have installed (inc. it in totem-plugins here in a test rebuild If moving to totem 3.4.4+/gstreamer1.0/grilo 0.2 then have tested that here, works ok though ATM not as good as 0.1 , though again any grilo issies are grilo bugs ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: totem 3.4.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-9.9-generic 3.5.0 Uname: Linux 3.5.0-9-generic x86_64 ApportVersion: 2.4-0ubuntu6 Architecture: amd64 Date: Sat Aug 11 14:32:15 2012 InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Alpha amd64 (20120707) ProcEnviron: TERM=xterm PATH=(custom, user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: totem UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1035701/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1035701] Re: grilo plugins should be enabled in Totem
MIR was approved so enable grilo support ** Patch added: totem-grilo.debdiff https://bugs.launchpad.net/ubuntu/+source/totem/+bug/1035701/+attachment/4110309/+files/totem-grilo.debdiff -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/1035701 Title: grilo plugins should be enabled in Totem Status in One Hundred Papercuts: Triaged Status in “totem” package in Ubuntu: Triaged Bug description: I see no good reason why they're not. For the most part they all work, any that don't are a grilo bug, (like vimeo), shouldn't affect being enabled. If sticking with 3.4.3/gstreamer .10/grilo 0.1 (0.1.2 is available) it would seem straightforward to enable have installed (inc. it in totem-plugins here in a test rebuild If moving to totem 3.4.4+/gstreamer1.0/grilo 0.2 then have tested that here, works ok though ATM not as good as 0.1 , though again any grilo issies are grilo bugs ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: totem 3.4.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-9.9-generic 3.5.0 Uname: Linux 3.5.0-9-generic x86_64 ApportVersion: 2.4-0ubuntu6 Architecture: amd64 Date: Sat Aug 11 14:32:15 2012 InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Alpha amd64 (20120707) ProcEnviron: TERM=xterm PATH=(custom, user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: totem UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1035701/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1315020]
Comment on attachment 8417932 Pass surface sizes in [Approval Request Comment] Bug caused by (feature/regressing bug #): Bug 991767 User impact if declined: Broken printing Testing completed (on m-c, etc.): Been on m-c for a week or so. Risk to taking this patch (and alternatives if risky): It's not an entirely trivial change, but getting it onto beta ASAP should give us the best chance of finding any regressions. One alternative is to uplift bug 989858 instead, but that has already had a few regressions and we'd need to uplift the whole set of fixes. We could also just backout and live with bug 740325. String or IDL/UUID changes made by this patch: None. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1315020 Title: PDF.js prints blank pages Status in The Mozilla Firefox Browser: Fix Released Status in “firefox” package in Ubuntu: Confirmed Bug description: The recent upgrade to 29.0+build1-0ubuntu0.12.04.2 (on Ubuntu 12.04.4 LTS) cause printing from PDF.js to emit essentially blank output (the spooled files are very small, and contain showpage directives with no page content, i.e., blank pages come out of the printer). Users can download the file from the down-arrow menu and print using a standalone viewer with no issue. This is probably https://bugzilla.mozilla.org/show_bug.cgi?id=1003707 To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1315020/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1286021] Re: 2.1 surround support (userspace)
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/patch_realtek.c?id=61a75f138a351baf0fdc8c210cebd06b9ced4279 where I can find latest alsa driver for trusty? https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1286021 Title: 2.1 surround support (userspace) Status in “alsa-lib” package in Ubuntu: Fix Committed Status in “pulseaudio” package in Ubuntu: In Progress Bug description: 2.1 surround should work as seamlessly as other surround options, such as 4.0, 5.1 and 7.1 work today. Alsa-lib and pulseaudio patches for 14.04 can be tested here: https://launchpad.net/~diwic/+archive/surround21 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1286021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1315020]
I am using the Arch package firefox-29.0.1-1 (built 2014-05-09T12:31:49 PDT) and the bug is still present, so I don't understand why it's been marked RESOLVED FIXED. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1315020 Title: PDF.js prints blank pages Status in The Mozilla Firefox Browser: Fix Released Status in “firefox” package in Ubuntu: Confirmed Bug description: The recent upgrade to 29.0+build1-0ubuntu0.12.04.2 (on Ubuntu 12.04.4 LTS) cause printing from PDF.js to emit essentially blank output (the spooled files are very small, and contain showpage directives with no page content, i.e., blank pages come out of the printer). Users can download the file from the down-arrow menu and print using a standalone viewer with no issue. This is probably https://bugzilla.mozilla.org/show_bug.cgi?id=1003707 To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1315020/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1315020]
Comment on attachment 8417932 Pass surface sizes in Approving also for beta since it is early in the process (beta 4). This will give us time to fix other regression or backout this patch if needed. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1315020 Title: PDF.js prints blank pages Status in The Mozilla Firefox Browser: Fix Released Status in “firefox” package in Ubuntu: Confirmed Bug description: The recent upgrade to 29.0+build1-0ubuntu0.12.04.2 (on Ubuntu 12.04.4 LTS) cause printing from PDF.js to emit essentially blank output (the spooled files are very small, and contain showpage directives with no page content, i.e., blank pages come out of the printer). Users can download the file from the down-arrow menu and print using a standalone viewer with no issue. This is probably https://bugzilla.mozilla.org/show_bug.cgi?id=1003707 To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1315020/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1315020]
(In reply to Vladimir G. Ivanovic from comment #45) I am using the Arch package firefox-29.0.1-1 (built 2014-05-09T12:31:49 PDT) and the bug is still present, so I don't understand why it's been marked RESOLVED FIXED. We mark bugs as resolved once they are fixed on mozilla-cental (firefox 32 currently). That said, 29.0.1 should have this bug fixed. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1315020 Title: PDF.js prints blank pages Status in The Mozilla Firefox Browser: Fix Released Status in “firefox” package in Ubuntu: Confirmed Bug description: The recent upgrade to 29.0+build1-0ubuntu0.12.04.2 (on Ubuntu 12.04.4 LTS) cause printing from PDF.js to emit essentially blank output (the spooled files are very small, and contain showpage directives with no page content, i.e., blank pages come out of the printer). Users can download the file from the down-arrow menu and print using a standalone viewer with no issue. This is probably https://bugzilla.mozilla.org/show_bug.cgi?id=1003707 To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/1315020/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316305] Re: Externa subwoofer asus sonicmaster doesn't work on Asus ux51vz
https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1316305 Title: Externa subwoofer asus sonicmaster doesn't work on Asus ux51vz Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: External subwoofer asus sonicmaster doesn't work on Asus ux51vz I also tried the configuration below, but in this way internal microphone doesn't work anymore add to /etc/modprobe.d/alsa-base.conf options snd-hda-intel model=asus-mode4 add to /usr/share/pulseaudio/alsa-mixer/profile-sets/extra-hdmi.conf [Mapping analog-surround-21] device-strings = surround21:%f surround40:%f channel-map = front-left,front-right,lfe,lfe paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-desktop-speaker priority = 8 direction = output make sure lfe-mixing is enabled in /etc/pulse/daemon.conf enable-lfe-remixing = yes To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1316305/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318505] Re: modem-manager crashed with SIGSEGV in mm_plugin_base_supports_task_complete()
*** This bug is a duplicate of bug 1157605 *** https://bugs.launchpad.net/bugs/1157605 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1157605, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Attachment removed: CoreDump.gz https://bugs.launchpad.net/bugs/1318505/+attachment/4110328/+files/CoreDump.gz ** Attachment removed: Disassembly.txt https://bugs.launchpad.net/bugs/1318505/+attachment/4110330/+files/Disassembly.txt ** Attachment removed: ProcMaps.txt https://bugs.launchpad.net/bugs/1318505/+attachment/4110331/+files/ProcMaps.txt ** Attachment removed: ProcStatus.txt https://bugs.launchpad.net/bugs/1318505/+attachment/4110332/+files/ProcStatus.txt ** Attachment removed: Registers.txt https://bugs.launchpad.net/bugs/1318505/+attachment/4110333/+files/Registers.txt ** Attachment removed: Stacktrace.txt https://bugs.launchpad.net/bugs/1318505/+attachment/4110334/+files/Stacktrace.txt ** Attachment removed: ThreadStacktrace.txt https://bugs.launchpad.net/bugs/1318505/+attachment/4110335/+files/ThreadStacktrace.txt ** This bug has been marked a duplicate of private bug 1157605 ** Information type changed from Private to Public ** Tags removed: need-amd64-retrace -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to modemmanager in Ubuntu. https://bugs.launchpad.net/bugs/1318505 Title: modem-manager crashed with SIGSEGV in mm_plugin_base_supports_task_complete() Status in “modemmanager” package in Ubuntu: New Bug description: Please see automatically generated Apport attachments ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: modemmanager 0.6.0.0.really-0ubuntu7 ProcVersionSignature: Ubuntu 3.11.0-20.35-generic 3.11.10.6 Uname: Linux 3.11.0-20-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Sun May 11 19:21:12 2014 ExecutablePath: /usr/sbin/modem-manager InstallationDate: Installed on 2011-12-08 (885 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) MarkForUpload: True ProcCmdline: /usr/sbin/modem-manager ProcEnviron: PATH=(custom, no user) TERM=linux SegvAnalysis: Segfault happened at: 0x7fa7655c96fc:cmpb $0x74,(%rax) PC (0x7fa7655c96fc) ok source $0x74 ok destination (%rax) (0x) not located in a known VMA region (needed writable region)! SegvReason: writing NULL VMA Signal: 11 SourcePackage: modemmanager StacktraceTop: ?? () from /usr/lib/ModemManager/libmm-plugin-iridium.so ?? () ?? () mm_plugin_base_supports_task_complete () g_closure_invoke () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: modem-manager crashed with SIGSEGV in mm_plugin_base_supports_task_complete() UpgradeStatus: Upgraded to saucy on 2013-12-17 (145 days ago) UserGroups: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1318505/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1159274] Re: Brightness can't be adjusted after running nvidia-xconfig (nvidia-experimental-310) on MacBookAir3, 1
This problem still exists in Trusty with current Nvidia driver and Macbokk 5,1. I had to manually edit xorg.conf to make backlight working. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-310 in Ubuntu. https://bugs.launchpad.net/bugs/1159274 Title: Brightness can't be adjusted after running nvidia-xconfig (nvidia- experimental-310) on MacBookAir3,1 Status in Mactel Support: New Status in “nvidia-graphics-drivers-310” package in Ubuntu: Incomplete Bug description: I've opened up LP Bug #1159269 regarding broken xorg.conf on boot but, even after I got X working properly after running nvidia-xconfig, brightness wasn't adjustable on my MacBookAir3,1. I had to manually edit xorg.conf to make brightness adjustable. In the Device section I had to add Option RegistryDwords EnableBrightnessControl=1: Section Device Identifier Device0 Driver nvidia VendorName NVIDIA Corporation BoardName GeForce 320M Option RegistryDwords EnableBrightnessControl=1 EndSection I'd expect brightness to work out of the box after installing an nvidia driver. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: nvidia-experimental-310 310.14-0ubuntu2 ProcVersionSignature: Ubuntu 3.8.0-13.23-generic 3.8.3 Uname: Linux 3.8.0-13-generic x86_64 NonfreeKernelModules: nvidia wl .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 310.14 Tue Oct 9 11:52:41 PDT 2012 GCC version: gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-22ubuntu4) .proc.driver.nvidia.warnings.fbdev: Your system is not currently configured to drive a VGA console on the primary VGA device. The NVIDIA Linux graphics driver requires the use of a text-mode VGA console. Use of other console drivers including, but not limited to, vesafb, may result in corruption and stability problems, and is not supported. .tmp.unity.support.test.0: ApportVersion: 2.9.2-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Sat Mar 23 20:11:41 2013 DistUpgraded: Fresh install DistroCodename: raring DistroVariant: ubuntu DkmsStatus: bcmwl, 6.20.155.1+bdcom, 3.8.0-13-generic, x86_64: installed nvidia-experimental-310, 310.14, 3.8.0-13-generic, x86_64: installed GraphicsCard: NVIDIA Corporation Device [10de:08a2] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Apple Inc. Device [106b:00d4] InstallationDate: Installed on 2013-03-23 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64+mac (20130320) MachineType: Apple Inc. MacBookAir3,1 MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-13-generic root=/dev/mapper/ubuntu--vg-root ro SourcePackage: nvidia-graphics-drivers-experimental-310 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/24/12 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA31.88Z.0061.B07.1201241641 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-942452F5819B1C1B dmi.board.vendor: Apple Inc. dmi.board.version: 1.0 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-942452F5819B1C1B dmi.modalias: dmi:bvnAppleInc.:bvrMBA31.88Z.0061.B07.1201241641:bd01/24/12:svnAppleInc.:pnMacBookAir3,1:pvr1.0:rvnAppleInc.:rnMac-942452F5819B1C1B:rvr1.0:cvnAppleInc.:ct10:cvrMac-942452F5819B1C1B: dmi.product.name: MacBookAir3,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. version.compiz: compiz 1:0.9.9~daily13.03.20-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.42-0ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.3-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.3-0ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.5-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.6-0ubuntu3b1 xserver.bootTime: Sat Mar 23 16:49:13 2013 xserver.configfile: /etc/X11/xorg.conf xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.13.3-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/mactel-support/+bug/1159274/+subscriptions --
[Desktop-packages] [Bug 1316021] Re: OAuth2 Tokens from providers that don't provide an expiry date are incorrectly expired on first use
** Branch linked: lp:~mardy/signon-plugin-oauth2/packaging -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to signon-plugin-oauth2 in Ubuntu. https://bugs.launchpad.net/bugs/1316021 Title: OAuth2 Tokens from providers that don't provide an expiry date are incorrectly expired on first use Status in Online Accounts: OAuth2 plug-in: In Progress Status in “signon-plugin-oauth2” package in Ubuntu: Confirmed Bug description: I've been trying to use the Online Accounts system to manage log in to the SoundCloud web site, and hit a problem: I can sign in without problem through the control panel, but when I try to retrieve the token via libsignon-glib, I get an error and the account is marked as signed out. Looking at the syslog chatter from signond, it apparently decides that the token has expired: May 5 14:11:50 scruffy signonpluginprocess[7357]: oauth2plugin.cpp 206 respondWithStoredToken : Stored token is expired This was a bit surprising, since SoundCloud says their tokens are not set to expire. Looking furtherback to where the token was stored, I see: May 5 14:10:03 scruffy signonpluginprocess[7263]: oauth2plugin.cpp 631 storeResponse : QMap((REDACTED_CLIENTID, QVariant(QVariantMap, QMap((Expiry, QVariant(int, 0) ) ( Scopes , QVariant(QStringList, (non-expiring) ) ) ( Token , QVariant(QString, REDACTED_TOKEN) ) ( refresh_token , QVariant(QString, ) ) ( timestamp , QVariant(uint, 1399270203) ) ) ) ) ) In particular, Expiry==0. This seems to be the code where the expiry is set, where it reads the expires_in property from the response JSON: http://code.google.com/p/accounts- sso/source/browse/src/oauth2plugin.cpp?repo=signon-plugin-oauth2#444 However, looking at the SoundCloud HTTP API reference, it isn't sending this in their JSON response: http://developers.soundcloud.com/docs/api/reference#token It looks like this method needs to check whether expires_in is actually included in the JSON response. To manage notifications about this bug go to: https://bugs.launchpad.net/signon-plugin-oauth2/+bug/1316021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316021] Re: OAuth2 Tokens from providers that don't provide an expiry date are incorrectly expired on first use
** Bug watch added: Email to accounts-sso-devel@googlegroups # mailto:accounts-sso-de...@googlegroups.com ** Also affects: signon-plugin-oauth2 via mailto:accounts-sso-de...@googlegroups.com Importance: Undecided Status: New ** Changed in: signon-plugin-oauth2 Status: New = In Progress ** Changed in: signon-plugin-oauth2 Importance: Undecided = Medium ** Changed in: signon-plugin-oauth2 (Ubuntu) Assignee: (unassigned) = Alberto Mardegan (mardy) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to signon-plugin-oauth2 in Ubuntu. https://bugs.launchpad.net/bugs/1316021 Title: OAuth2 Tokens from providers that don't provide an expiry date are incorrectly expired on first use Status in Online Accounts: OAuth2 plug-in: In Progress Status in “signon-plugin-oauth2” package in Ubuntu: Confirmed Bug description: I've been trying to use the Online Accounts system to manage log in to the SoundCloud web site, and hit a problem: I can sign in without problem through the control panel, but when I try to retrieve the token via libsignon-glib, I get an error and the account is marked as signed out. Looking at the syslog chatter from signond, it apparently decides that the token has expired: May 5 14:11:50 scruffy signonpluginprocess[7357]: oauth2plugin.cpp 206 respondWithStoredToken : Stored token is expired This was a bit surprising, since SoundCloud says their tokens are not set to expire. Looking furtherback to where the token was stored, I see: May 5 14:10:03 scruffy signonpluginprocess[7263]: oauth2plugin.cpp 631 storeResponse : QMap((REDACTED_CLIENTID, QVariant(QVariantMap, QMap((Expiry, QVariant(int, 0) ) ( Scopes , QVariant(QStringList, (non-expiring) ) ) ( Token , QVariant(QString, REDACTED_TOKEN) ) ( refresh_token , QVariant(QString, ) ) ( timestamp , QVariant(uint, 1399270203) ) ) ) ) ) In particular, Expiry==0. This seems to be the code where the expiry is set, where it reads the expires_in property from the response JSON: http://code.google.com/p/accounts- sso/source/browse/src/oauth2plugin.cpp?repo=signon-plugin-oauth2#444 However, looking at the SoundCloud HTTP API reference, it isn't sending this in their JSON response: http://developers.soundcloud.com/docs/api/reference#token It looks like this method needs to check whether expires_in is actually included in the JSON response. To manage notifications about this bug go to: https://bugs.launchpad.net/signon-plugin-oauth2/+bug/1316021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318390] Re: lightdm service is starting too late in boot sequence
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: lightdm (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1318390 Title: lightdm service is starting too late in boot sequence Status in “lightdm” package in Ubuntu: Confirmed Bug description: I noticed that many services are starting before lightdm although a desktop user doesn't need them until he logged into his desktop environment. The below services are starting too early in the boot sequence comparing to lightdm : - anacron - cron - cupsd ... Of course anacron and cron will wait a lower load or a delay before starting the tasks. However, the launch of those daemons will slow down the boot process. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lightdm 1.10.0-0ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: XFCE Date: Sun May 11 18:36:20 2014 InstallationDate: Installed on 2014-04-24 (16 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) LightdmGreeterLog: ** (lightdm-gtk-greeter:1214): WARNING **: Failed to load background: Impossible d'ouvrir le fichier « /lib/plymouth/themes/xubuntu-logo/wallpaper.png » : Aucun fichier ou dossier de ce type ** (lightdm-gtk-greeter:1214): WARNING **: Failed to load user image: Impossible d'ouvrir le fichier « /home/j/.face » : Aucun fichier ou dossier de ce type init: Le processus indicator-power main (1252) a été tué par le signal TERM init: Le processus indicator-application main (1261) a été tué par le signal TERM LightdmGreeterLogOld: ** (lightdm-gtk-greeter:1212): WARNING **: Failed to load background: Impossible d'ouvrir le fichier « /lib/plymouth/themes/xubuntu-logo/wallpaper.png » : Aucun fichier ou dossier de ce type ** (lightdm-gtk-greeter:1212): WARNING **: Failed to load user image: Impossible d'ouvrir le fichier « /home/j/.face » : Aucun fichier ou dossier de ce type init: Le processus indicator-power main (1250) a été tué par le signal TERM init: Le processus indicator-application main (1255) a été tué par le signal TERM SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1318390/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317599] Re: Evince doesn't show fi-ligatures in a pdf file
Maybe this is debian bug https://bugs.freedesktop.org/show_bug.cgi?id=73291 ? ** Bug watch added: freedesktop.org Bugzilla #73291 https://bugs.freedesktop.org/show_bug.cgi?id=73291 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1317599 Title: Evince doesn't show fi-ligatures in a pdf file Status in “evince” package in Ubuntu: Confirmed Bug description: When I open the attached pdf file, evince doesn't show the fi-ligatures, e.g. on page 17 I only see Preface to the rst edition. But when I mark text and copy it, the fi is also in there. Also printing works fine. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: evince 3.10.3-0ubuntu10 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Thu May 8 18:54:09 2014 ExecutablePath: /usr/bin/evince InstallationDate: Installed on 2012-09-03 (612 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) SourcePackage: evince UpgradeStatus: Upgraded to trusty on 2014-04-18 (20 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1317599/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 665065] Re: cannot distinguish between Home and Ctrl+Home
** Changed in: vte Status: Fix Released = New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-terminal in Ubuntu. https://bugs.launchpad.net/bugs/665065 Title: cannot distinguish between Home and Ctrl+Home Status in GNOME Terminal: New Status in Midnight Commander - text-mode file manager: Invalid Status in Gnome Virtual Terminal Emulator: New Status in “gnome-terminal” package in Ubuntu: Invalid Bug description: Binary package hint: gnome-terminal The main problem is that I cannot go to the start or end of file in mcedit. But the problem is not in mcedit, it happens with other programs run in terminal too. This is what I get when I retrieve key codes using gforth run in terminal: : pkey key . begin key? while key . repeat ; for Ctrl-Home and Home: pkey 27 79 72 ok pkey 27 79 72 ok For Ctrl-End and End: pkey 27 79 70 ok pkey 27 79 70 ok For comparison, for PgUp and Ctrl+PgUp I get: pkey 27 91 53 126 ok pkey 27 91 53 59 53 126 ok ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: gnome-terminal 2.30.2-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.32-24.42-generic-pae 2.6.32.15+drm33.5 Uname: Linux 2.6.32-24-generic-pae i686 Architecture: i386 Date: Fri Oct 22 15:12:42 2010 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: gnome-terminal To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-terminal/+bug/665065/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 434476]
Comment on attachment 8419908 Implement WakeLockListener on Linux to disable screensaver while video is playing +NS_IMPL_ISUPPORTS1(WakeLockListener, nsIDOMMozWakeLockListener) Will need to remove the '1' here now. + dbus_pending_call_set_notify(reply, ReceiveInhibitReply, this, NULL); |this| needs to stay alive until the reply is received, and I assume that may be after the power manager service is deleted. There are probably several ways to handle this: perhaps add a reference to the WakeLockListener, and remove in free_user_data; or make the WakeLockListener a singleton and check that it still exists in ReceiveInhibitReply(). +DBusError err; +dbus_error_init(err); This should be freed if set, but easier is to just pass nullptr. +WakeLockTopic::InhibitScreensaver() +{ + NS_ASSERTION(!mShouldInhibit, Screensaver is already inhibited); +WakeLockTopic::UninhibitScreensaver() +{ + if (!mShouldInhibit) { +// Screensaver isn't inhibited. Nothing to do here. +return NS_OK; Could this instead assert that this path is not reached, as in InhibitScreensaver()? + nsClassHashtablensStringHashKey, WakeLockTopic mTopics; Topics are never removed from this hashtable (until shutdown). Is there a small finite sized set of topics? Please add a comment stating this assumption. + virtual ~WakeLockListener() MOZ_FINAL; By moving the MOZ_FINAL to the class definition, this destructor need not be virtual. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/434476 Title: screensaver starts while playing HTML5 videos Status in The Mozilla Firefox Browser: Confirmed Status in “firefox” package in Ubuntu: Confirmed Status in “firefox-3.5” package in Ubuntu: Triaged Bug description: Binary package hint: firefox-3.5 karmic alpha6 + updates - click on a .ogv video link - after watching some time, screensaver starts. ProblemType: Bug Architecture: amd64 Date: Tue Sep 22 08:45:53 2009 DistroRelease: Ubuntu 9.10 NonfreeKernelModules: nvidia Package: firefox 3.5.3+build1+nobinonly-0ubuntu2 PackageArchitecture: all ProcEnviron: LANG=de_AT.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-10.34-generic SourcePackage: firefox-3.5 Uname: Linux 2.6.31-10-generic x86_64 To manage notifications about this bug go to: https://bugs.launchpad.net/firefox/+bug/434476/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 973295] Re: Enable grilo plugin
I agree that once bug #1116098 is really fixed (grilo moved to main), it'd be nice to have Rhythmbox with grilo enabled. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/973295 Title: Enable grilo plugin Status in “rhythmbox” package in Ubuntu: Triaged Bug description: At the moment grilo plugin is not being built thus leaving Jamendo and UPnP out of rhythmbox. This is only a packaging issue and can be easily fixed: debian/control: - Add libgrilo-0.1-dev to Build-Depends - Add gir1.2-grilo-0.1 to Depends on rhythmbox-plugins (or create a new package) debian/rhythmbox-plugins.install (or specific to a new package) - Add usr/lib/rhythmbox/plugins/grilo All grilo packages are now in Universe so this may not be done that easily though. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/973295/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318535] [NEW] Content logged to /var/log/upstart
Public bug reported: I'm using Ubuntu 14.10 dev and I'm noticing things logged to /var/log/upstart which may not be intended in this way. After deleting all logs and making a reboot I'm getting these things: alsa-state.log with alsa-state stop/pre-start, process 1063 and container-detect.log with container-detect stop/pre-start, process 278. I'm not sure why a stop/pre-start event is logged as it is very common and doesn't provide very useful information. console-setup.log with Loading /etc/console-setup/cached.kmap.gz. Maybe this could be intended but I'm not so sure about this too. cryptdisks.log with...done.. This log is incomplete and it looks the missing part is in /var/log/boot.log with * cryptswap1 (starting).. and * cryptswap1 (started)... [210G * Starting early crypto disks... [210G . Maybe all content of /var/log/upstart/cryptdisks.log should go into /var/log/boot.log. mountall.log with fsck von util-linux 2.20.1 /dev/sda1: sauber, 205747/9199616 Dateien, 16090003/36781311 Blöcke. This looks more useful but I'm wondering if this shouldn't go better into /var/log/boot.log too. procps-static-network-up.log and procps-virtual-filesystems.log with kernel.printk = 4 4 1 7 net.ipv6.conf.all.use_tempaddr = 2 net.ipv6.conf.default.use_tempaddr = 2 kernel.kptr_restrict = 1 fs.protected_hardlinks = 1 fs.protected_symlinks = 1 kernel.sysrq = 176 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 net.ipv4.tcp_syncookies = 1 kernel.yama.ptrace_scope = 1 vm.mmap_min_addr = 65536 kernel.pid_max = 4194303 vm.dirty_background_bytes = 16777216 vm.dirty_bytes = 16777216 vm.dirty_expire_centisecs = 0 vm.dirty_writeback_centisecs = 0 vm.laptop_mode = 1 vm.swappiness = 0 net.ipv4.ip_default_ttl = 255 net.ipv4.tcp_low_latency = 1 It looks not intended that the same sysctl options are logged in 2 different files. Maybe it is even not intended to create any of these both logs. ** Affects: alsa-utils (Ubuntu) Importance: Undecided Status: New ** Affects: console-setup (Ubuntu) Importance: Undecided Status: New ** Affects: cryptsetup (Ubuntu) Importance: Undecided Status: New ** Affects: mountall (Ubuntu) Importance: Undecided Status: New ** Affects: procps (Ubuntu) Importance: Undecided Status: New ** Affects: upstart (Ubuntu) Importance: Undecided Status: New ** Also affects: console-setup (Ubuntu) Importance: Undecided Status: New ** Also affects: upstart (Ubuntu) Importance: Undecided Status: New ** Also affects: cryptsetup (Ubuntu) Importance: Undecided Status: New ** Also affects: mountall (Ubuntu) Importance: Undecided Status: New ** Also affects: procps (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-utils in Ubuntu. https://bugs.launchpad.net/bugs/1318535 Title: Content logged to /var/log/upstart Status in “alsa-utils” package in Ubuntu: New Status in “console-setup” package in Ubuntu: New Status in “cryptsetup” package in Ubuntu: New Status in “mountall” package in Ubuntu: New Status in “procps” package in Ubuntu: New Status in “upstart” package in Ubuntu: New Bug description: I'm using Ubuntu 14.10 dev and I'm noticing things logged to /var/log/upstart which may not be intended in this way. After deleting all logs and making a reboot I'm getting these things: alsa-state.log with alsa-state stop/pre-start, process 1063 and container-detect.log with container-detect stop/pre-start, process 278. I'm not sure why a stop/pre-start event is logged as it is very common and doesn't provide very useful information. console-setup.log with Loading /etc/console-setup/cached.kmap.gz. Maybe this could be intended but I'm not so sure about this too. cryptdisks.log with...done.. This log is incomplete and it looks the missing part is in /var/log/boot.log with * cryptswap1 (starting).. and * cryptswap1 (started)... [210G * Starting early crypto disks... [210G . Maybe all content of /var/log/upstart/cryptdisks.log should go into /var/log/boot.log. mountall.log with fsck von util-linux 2.20.1 /dev/sda1: sauber, 205747/9199616 Dateien, 16090003/36781311 Blöcke. This looks more useful but I'm wondering if this shouldn't go better into /var/log/boot.log too. procps-static-network-up.log and procps-virtual-filesystems.log with kernel.printk = 4 4 1 7 net.ipv6.conf.all.use_tempaddr = 2 net.ipv6.conf.default.use_tempaddr = 2 kernel.kptr_restrict = 1 fs.protected_hardlinks = 1 fs.protected_symlinks = 1 kernel.sysrq = 176 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 net.ipv4.tcp_syncookies = 1 kernel.yama.ptrace_scope = 1 vm.mmap_min_addr = 65536 kernel.pid_max = 4194303
[Desktop-packages] [Bug 1318539] [NEW] Vanilla gnome-settings-daemon 3.8
Public bug reported: Now that we have unity-settings-daemon, gnome-settings-daemon only needs to support GNOME3. This drops all the Unity specific and legacy patches from g-s-d ** Affects: gnome-settings-daemon (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1318539 Title: Vanilla gnome-settings-daemon 3.8 Status in “gnome-settings-daemon” package in Ubuntu: New Bug description: Now that we have unity-settings-daemon, gnome-settings-daemon only needs to support GNOME3. This drops all the Unity specific and legacy patches from g-s-d To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1318539/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318541] [NEW] Keyboard key not working in Chromium
Public bug reported: The key 'ø' using Norwegian Dvorak keyboard layout has stopped working in Chromium. When I type it, nothing happens. I don't see this problem in other browser or other applications. Also using qwerty layout, I could not find any non working keys. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: chromium-browser 34.0.1847.116-0ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-26.48-generic 3.13.11 Uname: Linux 3.13.0-26-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 12 10:26:02 2014 Desktop-Session: DESKTOP_SESSION = ubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-ubuntu:/usr/share/upstart/xdg:/etc/xdg XDG_DATA_DIRS = /usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/ DetectedPlugins: DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20130203-1 EcryptfsInUse: Yes Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationDate: Installed on 2014-03-12 (60 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20130203-13:50 SourcePackage: chromium-browser UpgradeStatus: Upgraded to trusty on 2014-04-22 (19 days ago) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b'firefox\n'/desktop/gnome/url-handlers/https/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'gnome\n'/desktop/gnome/interface/gtk_theme = b'Clearlooks\n' modified.conffile..etc.default.chromium.browser: [deleted] ** Affects: chromium-browser (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1318541 Title: Keyboard key not working in Chromium Status in “chromium-browser” package in Ubuntu: New Bug description: The key 'ø' using Norwegian Dvorak keyboard layout has stopped working in Chromium. When I type it, nothing happens. I don't see this problem in other browser or other applications. Also using qwerty layout, I could not find any non working keys. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: chromium-browser 34.0.1847.116-0ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-26.48-generic 3.13.11 Uname: Linux 3.13.0-26-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 12 10:26:02 2014 Desktop-Session: DESKTOP_SESSION = ubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-ubuntu:/usr/share/upstart/xdg:/etc/xdg XDG_DATA_DIRS = /usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/ DetectedPlugins: DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20130203-1 EcryptfsInUse: Yes Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None InstallationDate: Installed on 2014-03-12 (60 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20130203-13:50 SourcePackage: chromium-browser UpgradeStatus: Upgraded to trusty on 2014-04-22 (19 days ago) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b'firefox\n'/desktop/gnome/url-handlers/https/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'gnome\n'/desktop/gnome/interface/gtk_theme = b'Clearlooks\n' modified.conffile..etc.default.chromium.browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1318541/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318539] Re: Vanilla gnome-settings-daemon 3.8
** Branch linked: lp:~darkxst/ubuntu/utopic/gnome-settings- daemon/lp1318539 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1318539 Title: Vanilla gnome-settings-daemon 3.8 Status in “gnome-settings-daemon” package in Ubuntu: New Bug description: Now that we have unity-settings-daemon, gnome-settings-daemon only needs to support GNOME3. This drops all the Unity specific and legacy patches from g-s-d To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1318539/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316305] Re: Externa subwoofer asus sonicmaster doesn't work on Asus ux51vz
Raymond, I've upgraded alsa and pulseaudio and added the analog-surround-21 profile in /usr/share/pulseaudio/alsa-mixer/profile-sets/extra-hdmi.conf and now it seems to work correctly. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1316305 Title: Externa subwoofer asus sonicmaster doesn't work on Asus ux51vz Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: External subwoofer asus sonicmaster doesn't work on Asus ux51vz I also tried the configuration below, but in this way internal microphone doesn't work anymore add to /etc/modprobe.d/alsa-base.conf options snd-hda-intel model=asus-mode4 add to /usr/share/pulseaudio/alsa-mixer/profile-sets/extra-hdmi.conf [Mapping analog-surround-21] device-strings = surround21:%f surround40:%f channel-map = front-left,front-right,lfe,lfe paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-desktop-speaker priority = 8 direction = output make sure lfe-mixing is enabled in /etc/pulse/daemon.conf enable-lfe-remixing = yes To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1316305/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317452] Re: Ubuntu Software Center install wrong version
** Changed in: software-center (Ubuntu) Status: Incomplete = New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-center in Ubuntu. https://bugs.launchpad.net/bugs/1317452 Title: Ubuntu Software Center install wrong version Status in “software-center” package in Ubuntu: New Bug description: Hi there, I'm under Ubuntu 14.04 LTS. I'm trying to install the package Ryzom from Ubuntu Software Center under Trusty, but instead of downloading the Trusty version (2.1.0.4658-0ubuntu2), it only downloads the Natty one (which is very old). I checked in my /etc/apt/sources.list.d/private-ppa.launchpad .net_commercial-ppa-uploaders_ryzom_ubuntu.list, it specifies natty instead of trusty. To fix the problem, I have to manually edit this file and replace natty by trusty and after refreshing packages list, it detects the new version and install it. I have no idea why it happens so I suspect it's a bug. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1317452/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318547] [NEW] gdb-multiarch doesn't work for Software requires gdb i386
Public bug reported: gdb:i386 is required by IBM Notes on Ubuntu 14.04 as dependency, but it can't be installed on the x86_64 architecture. we try to install gdb- multiarch on Ubuntu 14.04 for x86_64 instead, but Notes Client installation can't recognize this multiarch gdb and failed ** Affects: libbonoboui (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libbonoboui in Ubuntu. https://bugs.launchpad.net/bugs/1318547 Title: gdb-multiarch doesn't work for Software requires gdb i386 Status in “libbonoboui” package in Ubuntu: New Bug description: gdb:i386 is required by IBM Notes on Ubuntu 14.04 as dependency, but it can't be installed on the x86_64 architecture. we try to install gdb-multiarch on Ubuntu 14.04 for x86_64 instead, but Notes Client installation can't recognize this multiarch gdb and failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libbonoboui/+bug/1318547/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1311983] Re: firefox window suddenly resize to about 10x100 mm to upperleft screen corner
Compiz problem? https://bugs.launchpad.net/compiz/+bug/1158267 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1311983 Title: firefox window suddenly resize to about 10x100 mm to upperleft screen corner Status in “firefox” package in Ubuntu: New Bug description: While browsing with Firefox, for UNKNOWN REASON, suddenly resize to about 10x100 mm aligned to upper left corner of the screen. Grabbing is not possible, resizing is possible using Shift+Ctrl+Left Arrow short cut. In other instance it suddenly maximize to whole screen, the left side is behind the unity dash column and can not be accessed by mouse / cursor. Resizing using Shift+Ctrl+Left Arrow is possible. Back to normal from there. What activities lead to this anormality is not clear to me. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: firefox 28.0+build2-0ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: toni 1953 F pulseaudio BrokenPermissions: extensions/printPages2Pdf@reinhold.ripper/libraries/wkhtmltopdf-i386 (0o500) BuildID: 20140410211200 Channel: Unavailable CurrentDesktop: Unity Date: Thu Apr 24 11:24:26 2014 Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2014-04-19 (4 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) IpRoute: default via 192.168.43.1 dev wlan0 proto static 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.214 metric 9 Locales: extensions.sqlite corrupt or missing PrefSources: prefs.js [Profile]/extensions/printPages2Pdf@reinhold.ripper/defaults/preferences/defaults.js [Profile]/extensions/artur.dubo...@gmail.com/defaults/preferences/fvd_single_setup.js Profiles: Profile0 (Default) - LastVersion=28.0/20140410211200 (In use) RelatedPackageVersions: rhythmbox-mozilla 3.0.2-0ubuntu1 totem-mozilla 3.10.1-1ubuntu4 RunningIncompatibleAddons: False SourcePackage: firefox Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/24/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K43E.217 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K43E dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK43E.217:bd10/24/2011:svnASUSTeKComputerInc.:pnK43E:pvr1.0:rvnASUSTeKComputerInc.:rnK43E:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: K43E dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1311983/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1013881]
BTW, about the punctuation signs that, in French, requires a nbsp before them, i.e. ; : ! ? (for perfect typographic correctness, while usually few people know about this and nobody really cares...) : Usual word processing programs, such as OpenOffice / LibreOffice, when configured to the french locale, add these typographically required nbsps automagically, so people actually do not have to type the nbsp, which makes the need for an easy entry of these still less of an issue. Should we follow the slope of stealing a useful right [Ctrl] key for this, then me might well in the future steal the left one for the dash - , as in french, we typographically use at least 3 different lenghts for dashes. As previously, word processing software usually transforms the normal dash into the typographically correct dash... Nope, all this mess of quite complex and unusual characters is the very reason for which meta and compose keys exist in the first place... -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xkeyboard-config in Ubuntu. https://bugs.launchpad.net/bugs/1013881 Title: Right-Ctrl key broken on French OSS keyboard Status in central project for keyboard configuration: Confirmed Status in “xkeyboard-config” package in Ubuntu: Fix Released Status in “xkeyboard-config” source package in Precise: Fix Released Bug description: Since the version 2.5-1ubuntu1.2 of the package xkb-data, the right CTRL key of the keyboard has ceased to work. The problem started when APT has updated the xkd-data from 2.5-1ubuntu1 to 2.5-1ubuntu1.2. If I switch back to 2.5.-1ubuntu1 using Synaptic, it works back. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xkb-data 2.5-1ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-25.40-generic 3.2.18 Uname: Linux 3.2.0-25-generic x86_64 ApportVersion: 2.0.1-0ubuntu9 Architecture: amd64 Date: Sat Jun 16 00:16:09 2012 Dependencies: DistUpgraded: Fresh install DistroCodename: precise DistroVariant: ubuntu InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader MachineType: LENOVO 4243E69 PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic root=UUID=f6981326-31fd-4eaf-b039-3a1e5f33dbc0 ro quiet splash vt.handoff=7 SourcePackage: xkeyboard-config UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/06/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 8AET56WW (1.36 ) dmi.board.asset.tag: Not Available dmi.board.name: 4243E69 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8AET56WW(1.36):bd12/06/2011:svnLENOVO:pn4243E69:pvrThinkPadT520:rvnLENOVO:rn4243E69:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4243E69 dmi.product.version: ThinkPad T520 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.7.8-0ubuntu1 version.ia32-libs: ia32-libs 20090808ubuntu36 version.libdrm2: libdrm2 2.4.32-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3.1 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.19.0-0ubuntu1~xup1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build2 To manage notifications about this bug go to: https://bugs.launchpad.net/xkeyboard-config/+bug/1013881/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 221112]
BTW, about the punctuation signs that, in French, requires a nbsp before them, i.e. ; : ! ? (for perfect typographic correctness, while usually few people know about this and nobody really cares...) : Usual word processing programs, such as OpenOffice / LibreOffice, when configured to the french locale, add these typographically required nbsps automagically, so people actually do not have to type the nbsp, which makes the need for an easy entry of these still less of an issue. Should we follow the slope of stealing a useful right [Ctrl] key for this, then me might well in the future steal the left one for the dash - , as in french, we typographically use at least 3 different lenghts for dashes. As previously, word processing software usually transforms the normal dash into the typographically correct dash... Nope, all this mess of quite complex and unusual characters is the very reason for which meta and compose keys exist in the first place... -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/221112 Title: Can't use space bar in search bar when using french alternative keyboard Status in libgnomekbd: Confirmed Status in Listen, a Music player and management: Confirmed Status in Quod Libet is a GTK+-based audio player written in Python.: Unknown Status in The Rhythmbox Music Management Application: Confirmed Status in SciTE - A free source code editor for Win32 and X: New Status in central project for keyboard configuration: Confirmed Status in “quodlibet” package in Ubuntu: Invalid Status in “rhythmbox” package in Ubuntu: Fix Released Status in “xkeyboard-config” package in Ubuntu: Fix Released Status in “xkeyboard-config” source package in Precise: Triaged Bug description: [Impact] In the fr(oss) keymap, both space and Ctrl + space return the same XLookupString, which prevents space from being used in some applications. This had been fixed in lucid and maverick, but the patch appears to have been misplaced during the (rather major) update from 1.8 to 2.1, thus the reports of it regressing in comments #135 and #141, as well as dupe bug #938671. [Development Fix] Patch 128_fix_oss_ctrl_space_accelerator.patch fixed this problem in lucid and maverick, but was dropped in natty when we updated to upstream xkeyboard-config 2.1. However, the patch was also sent upstream and accepted there. So for quantal a cherrypick of that commit was backported. [Stable Fix] Since currently quantal is shipping the same xkeyboard-config version as precise, we can carry the same patch there as well. [Test Case] 1. Set keyboard to fr(oss). (Note due to unrelated bug, you need to do this in your /etc/defaults/keyboard config file.) 2. Start rhythmbox 3. Do a song search 4. Type in a search term that includes a space character Broken Behavior: Space triggers the play/pause function in rhythmbox Fixed Behavior: A space character is inserted [Regression Potential] The patch is one we carried in lucid and maverick (when rhythmbox was the default music player IIRC), and has been upstream for a while. So I think it is a safe change. Actually, I'm surprised there have not been more complaints about it lately. But during the interim we'd switched to banshee so perhaps users didn't notice it. [Original Report] I tried to search for The Do in the search bar, but the space bar didn't write a space. Instead, it played the currently selected song (space is the shortcut for playing/pausing the song). I've just installed the last Hardy release candidate. ProblemType: Bug Architecture: i386 Date: Wed Apr 23 19:30:12 2008 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/bin/rhythmbox NonfreeKernelModules: nvidia Package: rhythmbox 0.11.5-0ubuntu6 PackageArchitecture: i386 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: rhythmbox Uname: Linux 2.6.24-16-generic i686 To manage notifications about this bug go to: https://bugs.launchpad.net/libgnomekbd/+bug/221112/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1307701] Re: xserver mouse pointer emulation from touch breaks with QML app.
** Also affects: xorg-server (Ubuntu Trusty) Importance: Undecided Status: New ** Also affects: unity (Ubuntu Trusty) Importance: Undecided Status: New ** Also affects: qtbase-opensource-src (Ubuntu Trusty) Importance: Undecided Status: New ** Changed in: qtbase-opensource-src (Ubuntu Trusty) Status: New = In Progress ** Changed in: qtbase-opensource-src (Ubuntu Trusty) Importance: Undecided = High ** Changed in: qtbase-opensource-src (Ubuntu Trusty) Assignee: (unassigned) = Timo Jyrinki (timo-jyrinki) ** Changed in: unity (Ubuntu Trusty) Status: New = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1307701 Title: xserver mouse pointer emulation from touch breaks with QML app. Status in OEM Priority Project: New Status in OEM Priority Project trusty series: Triaged Status in X.Org X server: Confirmed Status in “qtbase-opensource-src” package in Ubuntu: In Progress Status in “unity” package in Ubuntu: Invalid Status in “xorg-server” package in Ubuntu: In Progress Status in “qtbase-opensource-src” source package in Trusty: In Progress Status in “unity” source package in Trusty: Invalid Status in “xorg-server” source package in Trusty: New Bug description: When running an SDK app on the desktop, it's not possible to use the touchscreen to move windows, use the launcher, etc. The SDK app seems to consume all touchscreen events. To reproduce: 1) On a desktop/laptop with a touchscreen (I am using a Dell XPS13), install 14.04 and check that the touchscreen works for moving windows 2) Install the camera-app package from universe (I have 2.9.1+14.04.20140331-0ubuntu1) 3) Launch the camera app 4) Touch once inside the camera-app window 5) Use the touchscreen to drag the camera-app window Expected results: You can move the camera-app window using the touchscreen Actual results: You cannot move the camera-app window, or perform any other touch tasks in unity, with the touchscreen This only affects touchscreen input - mouse/touchpad input is not affected This affects all apps written with the SDK (I tried camera-app, gallery-app, reminders-app). It's 100% reproducible. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity 7.2.0+14.04.20140411-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu2 Architecture: amd64 CompizPlugins: [core,commands,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] CurrentDesktop: Unity Date: Mon Apr 14 14:59:09 2014 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20130203-1 EcryptfsInUse: Yes InstallationDate: Installed on 2013-12-02 (132 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20130203-13:50 SourcePackage: unity UpgradeStatus: Upgraded to trusty on 2014-02-12 (61 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1307701/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318563] [NEW] [ICH4 - Intel ICH5, playback] No sound at all
Public bug reported: 1. Ubuntu 14.04 2. I don't know what package I found this bug in 3. I expected sound 4. I got no sound ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luuk 1846 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:20:17 2014 InstallationDate: Installed on 2014-11-05 (-177 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release i386 (20140417) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:ICH5 failed Symptom_Card: Built-in Audio - Intel ICH5 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luuk 1846 F pulseaudio Symptom_Type: No sound at all Title: [ICH4 - Intel ICH5, playback] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/14/2004 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3.24 dmi.board.name: 'P4SD-LA' dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3.24:bd04/14/2004:svnCompaqPresario061:pnDY147A-ABUS7500UKGB420:pvr0b\0411RE101OXFOR10:rvnASUSTeKComputerINC.:rn'P4SD-LA':rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: DY147A-ABU S7500UK GB420 dmi.product.version: 0b\0411RE101OXFOR10 dmi.sys.vendor: Compaq Presario 061 ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318563 Title: [ICH4 - Intel ICH5, playback] No sound at all Status in “alsa-driver” package in Ubuntu: New Bug description: 1. Ubuntu 14.04 2. I don't know what package I found this bug in 3. I expected sound 4. I got no sound ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luuk 1846 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:20:17 2014 InstallationDate: Installed on 2014-11-05 (-177 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release i386 (20140417) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:ICH5 failed Symptom_Card: Built-in Audio - Intel ICH5 Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luuk 1846 F pulseaudio Symptom_Type: No sound at all Title: [ICH4 - Intel ICH5, playback] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/14/2004 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3.24 dmi.board.name: 'P4SD-LA' dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3.24:bd04/14/2004:svnCompaqPresario061:pnDY147A-ABUS7500UKGB420:pvr0b\0411RE101OXFOR10:rvnASUSTeKComputerINC.:rn'P4SD-LA':rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: DY147A-ABU S7500UK GB420 dmi.product.version: 0b\0411RE101OXFOR10 dmi.sys.vendor: Compaq Presario 061 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1318563/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318561] [NEW] GNOME 3, icon bar in the middle of the screen
Public bug reported: When I hit the super key to enter the application menu, I find it in the middle of the screen, while normally it should be on the left side. After rebooting this issue disappears. I have experienced it several times, but I cannot say when it changes from left side to the center of the screen and which is the origin of this bug. Description:Ubuntu 14.04 LTS Release:14.04 Architecture: amd64 Desktop: GNOME 3 ** Affects: shotwell (Ubuntu) Importance: Undecided Status: New ** Attachment added: icon bar in the middle of the screen https://bugs.launchpad.net/bugs/1318561/+attachment/4110426/+files/Schermata%20da%202014-05-12%2011%3A16%3A43.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to shotwell in Ubuntu. https://bugs.launchpad.net/bugs/1318561 Title: GNOME 3, icon bar in the middle of the screen Status in “shotwell” package in Ubuntu: New Bug description: When I hit the super key to enter the application menu, I find it in the middle of the screen, while normally it should be on the left side. After rebooting this issue disappears. I have experienced it several times, but I cannot say when it changes from left side to the center of the screen and which is the origin of this bug. Description: Ubuntu 14.04 LTS Release: 14.04 Architecture: amd64 Desktop: GNOME 3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/shotwell/+bug/1318561/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318260] Re: Extract to directory containing asterisk
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: file-roller (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to file-roller in Ubuntu. https://bugs.launchpad.net/bugs/1318260 Title: Extract to directory containing asterisk Status in “file-roller” package in Ubuntu: New Bug description: Extracting files to the folder containing an asterisk in name leads to creating new folder (also applies when drag and dropped). The new folder is created with the name of the original one, but replacing the asterisk(s) with the name of the archive. For ie.: I have folder foo **/ and an archive archive.zip. Expected: When extracted to foo **/ the file(s) should be extracted there. What happens: When extracted it first creates the new folder foo archivearchive/ where it places the extracted file(s). = Ubuntu 14.04 LTS file-roller 3.10.2.1-0ubuntu4.amd64 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/file-roller/+bug/1318260/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317994] Re: Rhythmbox doesn't sync mtp device correctly
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Package changed: glib2.0 (Ubuntu) = rhythmbox (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to rhythmbox in Ubuntu. https://bugs.launchpad.net/bugs/1317994 Title: Rhythmbox doesn't sync mtp device correctly Status in “rhythmbox” package in Ubuntu: New Bug description: I have a SONY player NWZ-E443. I also have a favourite playlist, which I want to sync with the player. So there is the problem. When I syncing second, third and etc times, Rhythmbox deletes 56 files (I do not want why 56 yet) and copies them back. My favourite playlist has 117 songs. mike@mike-laptop:~$ lsb_release -rd Description: Ubuntu 14.04 LTS Release: 14.04 mike@mike-laptop:~$ apt-cache policy rhythmbox rhythmbox: Installed: 3.0.2-0ubuntu2 Candidate: 3.0.2-0ubuntu2 Table of versions *** 3.0.2-0ubuntu2 0 500 http://archive.ubuntu.com/ubuntu/ trusty-updates/main i386 Packages 100 /var/lib/dpkg/status 3.0.2-0ubuntu1 0 500 http://archive.ubuntu.com/ubuntu/ trusty/main i386 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/1317994/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1307631] Re: lost focus problem in icon view mode
** Bug watch added: GNOME Bug Tracker #563069 https://bugzilla.gnome.org/show_bug.cgi?id=563069 ** Changed in: nautilus Importance: Medium = Unknown ** Changed in: nautilus Status: Invalid = Unknown ** Changed in: nautilus Remote watch: GNOME Bug Tracker #729885 = GNOME Bug Tracker #563069 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1307631 Title: lost focus problem in icon view mode Status in Nautilus: Unknown Status in “nautilus” package in Ubuntu: Triaged Bug description: I'm using Ubuntu Trusty. I found a bug in nautilus-1:3.10.1-0ubuntu8. I think that: after renaming edit lost focus, it must be done, but it didn't. eg: when you create new folder (currently not yet )then it carried trash, it wasn't affected as it is moved to trash, and it still seems as if it's remained. For test, you can reproduce error with following steps. 1. Click View/Icons(or Press Ctrl+1) 2. Click File/Create New Folder(or Press Shift+Ctrl+N) 3. Click Edit/Move to trash To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/1307631/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 204536] Re: sound volume always resets to 100% after reboot
I'm also affected by this annoying bug. I am on 13.10 64-Bit and the sound volume of my pulseaudio is on 100% after reboot. I have an Intel on Board soundcard connect to my AV-Receiver via SPDIF. Hope, this gets fixed soon. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/204536 Title: sound volume always resets to 100% after reboot Status in One Hundred Papercuts: Invalid Status in “pulseaudio” package in Ubuntu: Fix Released Bug description: Every time I reboot I get the sound volume back to 100%, but the sound works fine apart from this. It's just *very* annoying to have to reset the volume every time I boot the PC. I set the volume from the volume icon in the system tray. I have two sound cards installed on my system (one on the motherboard and a SB Audigy), but I'm using only the Audigy. Another thing is that the mixer applet often incorrectly shows volume as muted when it's not. I'm using the hardy beta (hardy-desktop-amd64) from march 19th 2008. To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/204536/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318561] Re: GNOME 3, icon bar in the middle of the screen
** Package changed: shotwell (Ubuntu) = gnome-shell (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to shotwell in Ubuntu. https://bugs.launchpad.net/bugs/1318561 Title: GNOME 3, icon bar in the middle of the screen Status in “gnome-shell” package in Ubuntu: New Bug description: When I hit the super key to enter the application menu, I find it in the middle of the screen, while normally it should be on the left side. After rebooting this issue disappears. I have experienced it several times, but I cannot say when it changes from left side to the center of the screen and which is the origin of this bug. Description: Ubuntu 14.04 LTS Release: 14.04 Architecture: amd64 Desktop: GNOME 3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1318561/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318252] Re: nvidia-331-updates 331.38-0ubuntu7: nvidia-331-updates kernel module failed to build
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: nvidia-graphics-drivers-331-updates (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331-updates in Ubuntu. https://bugs.launchpad.net/bugs/1318252 Title: nvidia-331-updates 331.38-0ubuntu7: nvidia-331-updates kernel module failed to build Status in “nvidia-graphics-drivers-331-updates” package in Ubuntu: Confirmed Bug description: I can't build it with kernel 3.15-rc4 (amd64) ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-updates 331.38-0ubuntu7 Uname: Linux 3.15.0-eudyptula-00299-g28be335 x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 DKMSKernelVersion: 3.15.0-eudyptula-00299-g28be335 Date: Sat May 10 08:50:38 2014 InstallationDate: Installed on 2013-08-09 (273 days ago) InstallationMedia: Lubuntu 13.04 Raring Ringtail - Release amd64+mac (20130423.1) PackageVersion: 331.38-0ubuntu7 SourcePackage: nvidia-graphics-drivers-331-updates Title: nvidia-331-updates 331.38-0ubuntu7: nvidia-331-updates kernel module failed to build UpgradeStatus: Upgraded to trusty on 2014-04-28 (11 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331-updates/+bug/1318252/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1229021] Re: chromium-browser crashed with SIGSEGV
** Changed in: chromium-browser (Ubuntu) Importance: Medium = High ** Changed in: chromium-browser (Ubuntu) Assignee: (unassigned) = Chad Miller (cmiller) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1229021 Title: chromium-browser crashed with SIGSEGV Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: It crashes periodically when resizing Google Maps with its new interface. There are no crashes with the old interface. ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: chromium-browser 29.0.1547.65-0ubuntu2 ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 Uname: Linux 3.11.0-8-generic x86_64 ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 CrashCounter: 1 Date: Mon Sep 23 14:14:44 2013 Desktop-Session: DESKTOP_SESSION = ubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-ubuntu:/usr/share/upstart/xdg:/etc/xdg XDG_DATA_DIRS = /usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/ DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/sda1 ext4 443G 139G 282G 34% /\nnone tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup\nudev devtmpfs 7.8G 4.0K 7.8G 1% /dev\ntmpfs tmpfs 1.6G 1.2M 1.6G 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 7.8G 2.3M 7.8G 1% /run/shm\nnone tmpfs 100M 48K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/sda1 29M 648K 28M3% /\nnone 2.0M11 2.0M1% /sys/fs/cgroup\nudev 2.0M 535 2.0M1% /dev\ntmpfs 2.0M 560 2.0M1% /run\nnone 2.0M 5 2.0M1% /run/lock\nnone 2.0M16 2.0M1% /run/shm\nnone 2.0M28 2.0M1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2012-03-27 (544 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) MarkForUpload: True ProcCmdline: chromium-browser\ --type=gpu-process\ --channel=11058.45.1644192592\ --supports-dual-gpus=false\ --gpu-driver-bug-workarounds=0,6,19\ --gpu-vendor-id=0x8086\ --gpu-device-id=0x0102\ --gpu-driver-vendor=Mesa\ --gpu-driver-version=9.2 SegvAnalysis: Segfault happened at: 0x7ff2a2506188:movl $0x1337,0x0 PC (0x7ff2a2506188) ok source $0x1337 ok destination 0x0 (0x) not located in a known VMA region (needed writable region)! Stack memory exhausted (SP below stack segment) SegvReason: writing NULL VMA Signal: 11 SourcePackage: chromium-browser StacktraceTop: ?? () ?? () ?? () ?? () ?? () Title: chromium-browser crashed with SIGSEGV UpgradeStatus: Upgraded to saucy on 2013-09-14 (8 days ago) UserGroups: adm admin cdrom dialout libvirtd lpadmin plugdev sambashare chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b'/usr/bin/chromium-browser\n'/desktop/gnome/url-handlers/https/command = b'/usr/bin/chromium-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'/usr/bin/chromium-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'ubuntu-mono-dark\n'/desktop/gnome/interface/gtk_theme = b'Ambiance\n' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1229021/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1203296] Re: thunar crashed with SIGSEGV in magazine_chain_pop_head()
** Changed in: gtk+2.0 (Ubuntu) Importance: Undecided = High ** Changed in: gtk+2.0 (Ubuntu) Status: Confirmed = In Progress -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1203296 Title: thunar crashed with SIGSEGV in magazine_chain_pop_head() Status in GTK+ GUI Toolkit: Fix Released Status in “gtk+2.0” package in Ubuntu: In Progress Status in “thunar” package in Ubuntu: Invalid Bug description: I didn't notice a crash, just the crash reporting alert for no apparant reason. Perhaps something in background I am unaware of. ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: thunar 1.6.2-0ubuntu1 ProcVersionSignature: Ubuntu 3.10.0-4.13-generic 3.10.1 Uname: Linux 3.10.0-4-generic x86_64 ApportVersion: 2.11-0ubuntu1 Architecture: amd64 CrashCounter: 1 Date: Sat Jul 20 08:47:00 2013 ExecutablePath: /usr/bin/thunar InstallationDate: Installed on 2013-07-19 (0 days ago) InstallationMedia: Xubuntu 13.10 Saucy Salamander - Alpha amd64 (20130717) MarkForUpload: True ProcCmdline: /usr/bin/Thunar /media/username/Data/Downloads/torrents/complete/Flood.2007.DVDRip.XviD-VoMiT ProcEnviron: LANGUAGE=en_CA:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_CA.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0x7f4cf7099069:mov0x8(%rax),%rdi PC (0x7f4cf7099069) ok source 0x8(%rax) (0x0008) not located in a known VMA region (needed readable region)! destination %rdi ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: thunar StacktraceTop: ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 g_slice_free1 () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 g_type_free_instance () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 gtk_tree_view_remove_column () from /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0 Title: thunar crashed with SIGSEGV in g_slice_free1() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/gtk/+bug/1203296/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318570] [NEW] Disabled touchpad on again after wake
Public bug reported: I have set Disable touchpad when mouse is plugged in in System Settings / Touchpad. Works fine until I suspend the laptop to RAM. When waked up, touchpad is ON again. If I plug out and plug in the USB dongle it is disabled as expected. So I guess during waking up KDE doesn't test if a mouse is plugged. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-input-synaptics 1.7.4-0ubuntu1 [modified: usr/bin/synclient usr/bin/syndaemon] ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 CurrentDesktop: KDE Date: Mon May 12 11:02:59 2014 DistUpgraded: 2014-04-18 12:31:49,563 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: kubuntu InstallationDate: Installed on 2011-11-10 (913 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) MachineType: Hewlett-Packard HP ProBook 4525s ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6abf538c-ad60-407c-a8ab-25ac6f2c261e ro ipv6.disable=1 SourcePackage: xserver-xorg-input-synaptics UpgradeStatus: Upgraded to trusty on 2014-04-18 (23 days ago) dmi.bios.date: 02/14/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68CPK Ver. F.09 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 142D dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 51.18 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68CPKVer.F.09:bd02/14/2011:svnHewlett-Packard:pnHPProBook4525s:pvr:rvnHewlett-Packard:rn142D:rvrKBCVersion51.18:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4525s dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.11+14.04.20140423-0ubuntu1 version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-4ubuntu5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-4ubuntu5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Thu May 8 23:24:22 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: Output HDMI-0LVDS VGA-0 xserver.version: 2:1.15.1-0ubuntu2 xserver.video_driver: radeon ** Affects: xserver-xorg-input-synaptics (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 kubuntu trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu. https://bugs.launchpad.net/bugs/1318570 Title: Disabled touchpad on again after wake Status in “xserver-xorg-input-synaptics” package in Ubuntu: New Bug description: I have set Disable touchpad when mouse is plugged in in System Settings / Touchpad. Works fine until I suspend the laptop to RAM. When waked up, touchpad is ON again. If I plug out and plug in the USB dongle it is disabled as expected. So I guess during waking up KDE doesn't test if a mouse is plugged. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-input-synaptics 1.7.4-0ubuntu1 [modified: usr/bin/synclient usr/bin/syndaemon] ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 CurrentDesktop: KDE Date: Mon May 12 11:02:59 2014 DistUpgraded: 2014-04-18 12:31:49,563 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: kubuntu InstallationDate: Installed on 2011-11-10 (913 days ago) InstallationMedia: Kubuntu 11.10 Oneiric Ocelot - Release i386 (20111012) MachineType: Hewlett-Packard HP ProBook 4525s ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6abf538c-ad60-407c-a8ab-25ac6f2c261e ro ipv6.disable=1 SourcePackage: xserver-xorg-input-synaptics UpgradeStatus: Upgraded to trusty on 2014-04-18 (23 days ago) dmi.bios.date: 02/14/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68CPK Ver. F.09 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 142D dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 51.18 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68CPKVer.F.09:bd02/14/2011:svnHewlett-Packard:pnHPProBook4525s:pvr:rvnHewlett-Packard:rn142D:rvrKBCVersion51.18:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4525s dmi.sys.vendor: Hewlett-Packard version.compiz: compiz
[Desktop-packages] [Bug 1219245] Re: soffice.bin crashed with SIGSEGV in ImplDevFontListData::~ImplDevFontListData()
** Changed in: libreoffice (Ubuntu) Importance: Medium = High ** Changed in: libreoffice (Ubuntu) Assignee: (unassigned) = Björn Michaelsen (bjoern-michaelsen) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1219245 Title: soffice.bin crashed with SIGSEGV in ImplDevFontListData::~ImplDevFontListData() Status in “libreoffice” package in Ubuntu: Confirmed Bug description: ubuntustudio 13.10 ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: libreoffice-core 1:4.1.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-2.1-lowlatency 3.11.0-rc5 Uname: Linux 3.11.0-2-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 Date: Sat Aug 31 17:27:00 2013 ExecutablePath: /usr/lib/libreoffice/program/soffice.bin InstallationDate: Installed on 2013-08-28 (3 days ago) InstallationMedia: Ubuntu-Studio 13.10 Saucy Salamander - Alpha amd64 (20130824) MarkForUpload: True ProcCmdline: /usr/lib/libreoffice/program/soffice.bin --splash-pipe=5 SegvAnalysis: Segfault happened at: 0x7f1e300bfd30:mov0x58(%rdi),%rdx PC (0x7f1e300bfd30) ok source 0x58(%rdi) (0x0056) not located in a known VMA region (needed readable region)! destination %rdx ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: libreoffice StacktraceTop: ?? () from /usr/lib/libreoffice/program/libmergedlo.so ImplDevFontList::Clear() () from /usr/lib/libreoffice/program/libmergedlo.so ?? () from /usr/lib/libreoffice/program/libmergedlo.so ?? () from /usr/lib/libreoffice/program/libmergedlo.so SalGenericDisplay::DispatchInternalEvent() () from /usr/lib/libreoffice/program/libmergedlo.so Title: soffice.bin crashed with SIGSEGV in ImplDevFontList::Clear() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip fuse lpadmin netdev plugdev sambashare scanner sudo video To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1219245/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318576] [NEW] [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED
Public bug reported: I'm using Ubuntu 14.10, the package (maybe) is 1.0.25+dfsg-0ubuntu4. I think also pulseaudio is involved with this problem. It is pulseaudio 1:4.0-0ubuntu11. No sound is played, neither with speakers nor with headphones. Sometimes it works with sudo alsa force-reload but there's always some problem while unloading the plugin (it seems to be used by some process). After an uninstall and reinstall of alsa-base and pulseaudio my audio icon disappeared and there's no way to get audio back. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:55:48 2014 InstallationDate: Installed on 2013-11-18 (174 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Audio interno - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio michele9464 F alsamixer Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to trusty on 2014-04-30 (12 days ago) dmi.bios.date: 03/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VD.411 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VD.411:bd03/11/2013:svnASUSTeKCOMPUTERINC.:pnK55VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318576 Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED Status in “alsa-driver” package in Ubuntu: New Bug description: I'm using Ubuntu 14.10, the package (maybe) is 1.0.25+dfsg-0ubuntu4. I think also pulseaudio is involved with this problem. It is pulseaudio 1:4.0-0ubuntu11. No sound is played, neither with speakers nor with headphones. Sometimes it works with sudo alsa force-reload but there's always some problem while unloading the plugin (it seems to be used by some process). After an uninstall and reinstall of alsa-base and pulseaudio my audio icon disappeared and there's no way to get audio back. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:55:48 2014 InstallationDate: Installed on 2013-11-18 (174 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Audio interno - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio michele9464 F alsamixer Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to trusty on 2014-04-30 (12 days ago) dmi.bios.date: 03/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VD.411 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VD.411:bd03/11/2013:svnASUSTeKCOMPUTERINC.:pnK55VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to:
[Desktop-packages] [Bug 1316841] Re: apportcheckresume does not create a duplicate signature
** Also affects: apport (Ubuntu Utopic) Importance: High Assignee: Brian Murray (brian-murray) Status: Fix Committed ** Also affects: apport (Ubuntu Trusty) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1316841 Title: apportcheckresume does not create a duplicate signature Status in Ubuntu error tracker backend (daisy): Triaged Status in “apport” package in Ubuntu: Fix Committed Status in “apport” source package in Trusty: New Status in “apport” source package in Utopic: Fix Committed Bug description: There is no StacktraceAddressSignature nor a DuplicateSignature in these crashes so they are never consolidated by the Ubuntu Error Tracker and subsequently do not appear in the top crashes for linux. To manage notifications about this bug go to: https://bugs.launchpad.net/daisy/+bug/1316841/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318581] [NEW] Tooltips for Next and Previous pages are mixed up
Public bug reported: The button for the next page shows the tooltip Previous Page and vice versa. It's a little confusing :) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: evince 3.10.3-0ubuntu10 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 12 09:04:16 2014 InstallationDate: Installed on 2014-03-09 (63 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140308) KernLog: May 12 08:47:42 jarlath-VirtualBox kernel: [ 1542.205458] type=1400 audit(1399880862.706:71): apparmor=STATUS operation=profile_replace profile=unconfined name=/usr/sbin/cups-browsed pid=4413 comm=apparmor_parser May 12 08:47:43 jarlath-VirtualBox kernel: [ 1542.897290] type=1400 audit(1399880863.398:72): apparmor=STATUS operation=profile_replace profile=unconfined name=/usr/sbin/cups-browsed pid=4452 comm=apparmor_parser SourcePackage: evince UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: evince (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty ** Summary changed: - Tooltips for Next and Previous pages are mixed dup + Tooltips for Next and Previous pages are mixed up -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1318581 Title: Tooltips for Next and Previous pages are mixed up Status in “evince” package in Ubuntu: New Bug description: The button for the next page shows the tooltip Previous Page and vice versa. It's a little confusing :) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: evince 3.10.3-0ubuntu10 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 12 09:04:16 2014 InstallationDate: Installed on 2014-03-09 (63 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140308) KernLog: May 12 08:47:42 jarlath-VirtualBox kernel: [ 1542.205458] type=1400 audit(1399880862.706:71): apparmor=STATUS operation=profile_replace profile=unconfined name=/usr/sbin/cups-browsed pid=4413 comm=apparmor_parser May 12 08:47:43 jarlath-VirtualBox kernel: [ 1542.897290] type=1400 audit(1399880863.398:72): apparmor=STATUS operation=profile_replace profile=unconfined name=/usr/sbin/cups-browsed pid=4452 comm=apparmor_parser SourcePackage: evince UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1318581/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1219245] Re: soffice.bin crashed with SIGSEGV in ImplDevFontListData::~ImplDevFontListData()
** Bug watch added: Red Hat Bugzilla #1043576 https://bugzilla.redhat.com/show_bug.cgi?id=1043576 ** Also affects: libreoffice (Fedora) via https://bugzilla.redhat.com/show_bug.cgi?id=1043576 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1219245 Title: soffice.bin crashed with SIGSEGV in ImplDevFontListData::~ImplDevFontListData() Status in “libreoffice” package in Ubuntu: Confirmed Status in “libreoffice” package in Fedora: Unknown Bug description: ubuntustudio 13.10 ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: libreoffice-core 1:4.1.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-2.1-lowlatency 3.11.0-rc5 Uname: Linux 3.11.0-2-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 Date: Sat Aug 31 17:27:00 2013 ExecutablePath: /usr/lib/libreoffice/program/soffice.bin InstallationDate: Installed on 2013-08-28 (3 days ago) InstallationMedia: Ubuntu-Studio 13.10 Saucy Salamander - Alpha amd64 (20130824) MarkForUpload: True ProcCmdline: /usr/lib/libreoffice/program/soffice.bin --splash-pipe=5 SegvAnalysis: Segfault happened at: 0x7f1e300bfd30:mov0x58(%rdi),%rdx PC (0x7f1e300bfd30) ok source 0x58(%rdi) (0x0056) not located in a known VMA region (needed readable region)! destination %rdx ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: libreoffice StacktraceTop: ?? () from /usr/lib/libreoffice/program/libmergedlo.so ImplDevFontList::Clear() () from /usr/lib/libreoffice/program/libmergedlo.so ?? () from /usr/lib/libreoffice/program/libmergedlo.so ?? () from /usr/lib/libreoffice/program/libmergedlo.so SalGenericDisplay::DispatchInternalEvent() () from /usr/lib/libreoffice/program/libmergedlo.so Title: soffice.bin crashed with SIGSEGV in ImplDevFontList::Clear() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip fuse lpadmin netdev plugdev sambashare scanner sudo video To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1219245/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318586] [NEW] nvidia-331 331.38-0ubuntu7: nvidia-331 kernel module failed to build
Public bug reported: routine apt-get update apt-get dist-upgrade gave this error. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331 331.38-0ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 NonfreeKernelModules: nvidia zfs zunicode zavl zcommon znvpair ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 DKMSKernelVersion: 3.13.0-24-generic Date: Mon May 12 12:23:25 2014 InstallationDate: Installed on 2011-10-03 (952 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Beta amd64 (20110901) PackageVersion: 331.38-0ubuntu7 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331 331.38-0ubuntu7: nvidia-331 kernel module failed to build UpgradeStatus: Upgraded to trusty on 2013-12-24 (138 days ago) ** Affects: nvidia-graphics-drivers-331 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package third-party-packages trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1318586 Title: nvidia-331 331.38-0ubuntu7: nvidia-331 kernel module failed to build Status in “nvidia-graphics-drivers-331” package in Ubuntu: New Bug description: routine apt-get update apt-get dist-upgrade gave this error. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331 331.38-0ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8 Uname: Linux 3.13.0-23-generic x86_64 NonfreeKernelModules: nvidia zfs zunicode zavl zcommon znvpair ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 DKMSKernelVersion: 3.13.0-24-generic Date: Mon May 12 12:23:25 2014 InstallationDate: Installed on 2011-10-03 (952 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Beta amd64 (20110901) PackageVersion: 331.38-0ubuntu7 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331 331.38-0ubuntu7: nvidia-331 kernel module failed to build UpgradeStatus: Upgraded to trusty on 2013-12-24 (138 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1318586/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1219245] Re: soffice.bin crashed with SIGSEGV in ImplDevFontListData::~ImplDevFontListData()
** Bug watch added: freedesktop.org Bugzilla #78598 https://bugs.freedesktop.org/show_bug.cgi?id=78598 ** Also affects: df-libreoffice via https://bugs.freedesktop.org/show_bug.cgi?id=78598 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1219245 Title: soffice.bin crashed with SIGSEGV in ImplDevFontListData::~ImplDevFontListData() Status in LibreOffice Productivity Suite: Unknown Status in “libreoffice” package in Ubuntu: Confirmed Status in “libreoffice” package in Fedora: Unknown Bug description: ubuntustudio 13.10 ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: libreoffice-core 1:4.1.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-2.1-lowlatency 3.11.0-rc5 Uname: Linux 3.11.0-2-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 Date: Sat Aug 31 17:27:00 2013 ExecutablePath: /usr/lib/libreoffice/program/soffice.bin InstallationDate: Installed on 2013-08-28 (3 days ago) InstallationMedia: Ubuntu-Studio 13.10 Saucy Salamander - Alpha amd64 (20130824) MarkForUpload: True ProcCmdline: /usr/lib/libreoffice/program/soffice.bin --splash-pipe=5 SegvAnalysis: Segfault happened at: 0x7f1e300bfd30:mov0x58(%rdi),%rdx PC (0x7f1e300bfd30) ok source 0x58(%rdi) (0x0056) not located in a known VMA region (needed readable region)! destination %rdx ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: libreoffice StacktraceTop: ?? () from /usr/lib/libreoffice/program/libmergedlo.so ImplDevFontList::Clear() () from /usr/lib/libreoffice/program/libmergedlo.so ?? () from /usr/lib/libreoffice/program/libmergedlo.so ?? () from /usr/lib/libreoffice/program/libmergedlo.so SalGenericDisplay::DispatchInternalEvent() () from /usr/lib/libreoffice/program/libmergedlo.so Title: soffice.bin crashed with SIGSEGV in ImplDevFontList::Clear() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip fuse lpadmin netdev plugdev sambashare scanner sudo video To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1219245/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318589] [NEW] [BDW] fix various GPU hang issues
Public bug reported: Backport an upstream commit that fixes various GPU hang bugs on Broadwell. commit 9584959123b0453cf5313722357e3abb9f736aa7 Author: Kenneth Graunke kenn...@whitecape.org Date: Thu May 8 16:44:37 2014 -0700 i965: Fix GPU hangs on Broadwell in shaders with some control flow. According to the documentation, we need to set the source 0 register type to IMM for flow control instructions that have both JIP and UIP. Fixes GPU hangs in approximately 10 Piglit tests, 5 es3conform tests, Unigine Crypt, a WebGL raytracer demo, and several Steam titles. ** Affects: mesa (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1318589 Title: [BDW] fix various GPU hang issues Status in “mesa” package in Ubuntu: New Bug description: Backport an upstream commit that fixes various GPU hang bugs on Broadwell. commit 9584959123b0453cf5313722357e3abb9f736aa7 Author: Kenneth Graunke kenn...@whitecape.org Date: Thu May 8 16:44:37 2014 -0700 i965: Fix GPU hangs on Broadwell in shaders with some control flow. According to the documentation, we need to set the source 0 register type to IMM for flow control instructions that have both JIP and UIP. Fixes GPU hangs in approximately 10 Piglit tests, 5 es3conform tests, Unigine Crypt, a WebGL raytracer demo, and several Steam titles. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1318589/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1315748] Re: Flashback compiz Ubuntu 14.04
Ok tks I will try -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-panel in Ubuntu. https://bugs.launchpad.net/bugs/1315748 Title: Flashback compiz Ubuntu 14.04 Status in “gnome-panel” package in Ubuntu: New Bug description: Hello again For the beginning I can say I don`t like Unity so I use Flashback aka Gnome shell/classic. I use Flashback Metacity. Today I have tested Flashback Compiz and has some bugs as you can see in attached video -Terminal does not show menu butons: close, minimize, Firefox. Files etc - also has filcker bug for opened folders. Flicker exist also in Flashback Metacity Description:Ubuntu 14.04 LTS 32bit To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-panel/+bug/1315748/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1312159] [NEW] ** (gksu:xxxx): CRITICAL **: fcntl error
You have been subscribed to a public bug: I chaneged my system from 13.10 to 14.04 by clean install. I got kerneloops on 14.04 beta 2 so I went back to 13.10. To try to new kernel on 14.04 I installed it yesterday. After the clean install and run updates my first task was to modify the grub and fstab. I'm using for it the gksu gedit command. Now I got error message and gedit not opened. For example: barricade@Barricade:~$ gksu gedit /etc/fstab (gksu:4983): Gtk-WARNING **: Failed to set text from markup due to error parsing markup: Error on line 1 char 86: Element 'b' was closed, but the currently open element is 'big' ** (gksu:4983): CRITICAL **: fcntl error ** (gksu:4983): WARNING **: Lock taken by pid: -1. Exiting. We talked about it on hungarian ubuntu forum and got same message from gksu other user too. I tryed to purge and reinstall the gksu but it not solved the problem. The sudo nano /etc/fstab and sudo gedit /etc/fstab commands working well. I tryed reinstall all system but the gksu problem is occured again. --- ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-04-23 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) Package: linux (not installed) Tags: trusty Uname: Linux 3.15.0-031500rc2-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True ** Affects: gksu (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected trusty -- ** (gksu:): CRITICAL **: fcntl error https://bugs.launchpad.net/bugs/1312159 You received this bug notification because you are a member of Desktop Packages, which is subscribed to gksu in Ubuntu. -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1312159] Re: ** (gksu:xxxx): CRITICAL **: fcntl error
** Package changed: linux (Ubuntu) = gksu (Ubuntu) ** Changed in: gksu (Ubuntu) Importance: Medium = Undecided ** Changed in: gksu (Ubuntu) Status: Incomplete = New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gksu in Ubuntu. https://bugs.launchpad.net/bugs/1312159 Title: ** (gksu:): CRITICAL **: fcntl error Status in “gksu” package in Ubuntu: New Bug description: I chaneged my system from 13.10 to 14.04 by clean install. I got kerneloops on 14.04 beta 2 so I went back to 13.10. To try to new kernel on 14.04 I installed it yesterday. After the clean install and run updates my first task was to modify the grub and fstab. I'm using for it the gksu gedit command. Now I got error message and gedit not opened. For example: barricade@Barricade:~$ gksu gedit /etc/fstab (gksu:4983): Gtk-WARNING **: Failed to set text from markup due to error parsing markup: Error on line 1 char 86: Element 'b' was closed, but the currently open element is 'big' ** (gksu:4983): CRITICAL **: fcntl error ** (gksu:4983): WARNING **: Lock taken by pid: -1. Exiting. We talked about it on hungarian ubuntu forum and got same message from gksu other user too. I tryed to purge and reinstall the gksu but it not solved the problem. The sudo nano /etc/fstab and sudo gedit /etc/fstab commands working well. I tryed reinstall all system but the gksu problem is occured again. --- ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-04-23 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) Package: linux (not installed) Tags: trusty Uname: Linux 3.15.0-031500rc2-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gksu/+bug/1312159/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1311068] Re: No longer deactivates on key press
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: xscreensaver (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xscreensaver in Ubuntu. https://bugs.launchpad.net/bugs/1311068 Title: No longer deactivates on key press Status in “xscreensaver” package in Ubuntu: Confirmed Bug description: Before upgrading to Ubuntu 14.04, xscreensaver would deactivate and return to the desktop on either a key press or mouse movement. After the upgrade: * On mouse movement, it deactivates and returns to the desktop correctly. * On keyboard key press, the active screensaver (glslideshow on my laptop) stops, and a black screen with the mouse pointer is shown. The desktop is not shown until the mouse is moved. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xscreensaver 5.15-3ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 CurrentDesktop: Unity Date: Tue Apr 22 13:20:50 2014 InstallationDate: Installed on 2010-03-01 (1512 days ago) InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5) SourcePackage: xscreensaver UpgradeStatus: Upgraded to trusty on 2014-04-02 (19 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xscreensaver/+bug/1311068/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1219245] Re: soffice.bin crashed with SIGSEGV in ImplDevFontListData::~ImplDevFontListData()
Launchpad has imported 4 comments from the remote bug at https://bugs.freedesktop.org/show_bug.cgi?id=78598. If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. On 2014-05-12T10:25:33+00:00 Björn Michaelsen wrote: LibreOffice shows crashes on clearing the FontListData, unfortunately there is no good reproduction scenario yet, but this issue ranks high on http://errors.ubuntu.com and also happens on Fedora. Errors.ubuntu.com reports this stacktrace to first appear on version 4.0.2. A stacktrace (which has been reported multiple times) can be found on the Launchpad bug. While the description of the reports by users do provide no conclusive reproduction scenario, there are: - two report of crash on close - one report of crash while installing a font - one report of crash while upgrading The latter two might actually be the same as upgrades might install new fonts. Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1219245/comments/7 On 2014-05-12T10:26:28+00:00 Björn Michaelsen wrote: confirmed by multiple Ubuntu reports and a Fedora report. Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1219245/comments/8 On 2014-05-12T10:38:15+00:00 Björn Michaelsen wrote: Created attachment 98899 stacktrace with resolved symbols adding stacktrace Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1219245/comments/9 On 2014-05-12T11:17:04+00:00 Björn Michaelsen wrote: Looking at the errors.ubuntu.com stats of today (14.04 LTS is out relatively new still) - it seems that _all_ todays reports are from the 14.04 distro, while the bug was first seen on 4.0.2. This might suggest that this is indeed an issue of users keeping libreoffice running during an distro upgrade (with fonts and lots of other things changing below their feet). Reply at: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1219245/comments/10 ** Changed in: df-libreoffice Status: Unknown = Confirmed ** Changed in: df-libreoffice Importance: Unknown = Medium -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1219245 Title: soffice.bin crashed with SIGSEGV in ImplDevFontListData::~ImplDevFontListData() Status in LibreOffice Productivity Suite: Confirmed Status in “libreoffice” package in Ubuntu: Confirmed Status in “libreoffice” package in Fedora: Unknown Bug description: ubuntustudio 13.10 ProblemType: Crash DistroRelease: Ubuntu 13.10 Package: libreoffice-core 1:4.1.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-2.1-lowlatency 3.11.0-rc5 Uname: Linux 3.11.0-2-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 Date: Sat Aug 31 17:27:00 2013 ExecutablePath: /usr/lib/libreoffice/program/soffice.bin InstallationDate: Installed on 2013-08-28 (3 days ago) InstallationMedia: Ubuntu-Studio 13.10 Saucy Salamander - Alpha amd64 (20130824) MarkForUpload: True ProcCmdline: /usr/lib/libreoffice/program/soffice.bin --splash-pipe=5 SegvAnalysis: Segfault happened at: 0x7f1e300bfd30:mov0x58(%rdi),%rdx PC (0x7f1e300bfd30) ok source 0x58(%rdi) (0x0056) not located in a known VMA region (needed readable region)! destination %rdx ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: libreoffice StacktraceTop: ?? () from /usr/lib/libreoffice/program/libmergedlo.so ImplDevFontList::Clear() () from /usr/lib/libreoffice/program/libmergedlo.so ?? () from /usr/lib/libreoffice/program/libmergedlo.so ?? () from /usr/lib/libreoffice/program/libmergedlo.so SalGenericDisplay::DispatchInternalEvent() () from /usr/lib/libreoffice/program/libmergedlo.so Title: soffice.bin crashed with SIGSEGV in ImplDevFontList::Clear() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip fuse lpadmin netdev plugdev sambashare scanner sudo video To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1219245/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318589] Re: [BDW] fix various GPU hang issues
** Branch linked: lp:ubuntu/utopic-proposed/mesa -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1318589 Title: [BDW] fix various GPU hang issues Status in “mesa” package in Ubuntu: New Bug description: Backport an upstream commit that fixes various GPU hang bugs on Broadwell. commit 9584959123b0453cf5313722357e3abb9f736aa7 Author: Kenneth Graunke kenn...@whitecape.org Date: Thu May 8 16:44:37 2014 -0700 i965: Fix GPU hangs on Broadwell in shaders with some control flow. According to the documentation, we need to set the source 0 register type to IMM for flow control instructions that have both JIP and UIP. Fixes GPU hangs in approximately 10 Piglit tests, 5 es3conform tests, Unigine Crypt, a WebGL raytracer demo, and several Steam titles. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1318589/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318616] [NEW] lts-trusty enablement in precise
Public bug reported: Some packages need to be updated for precise. ** Affects: libdrm (Ubuntu) Importance: Undecided Status: Invalid ** Affects: llvm-toolchain-3.4 (Ubuntu) Importance: Undecided Status: New ** Affects: xorg-lts-transitional (Ubuntu) Importance: Undecided Status: Invalid ** Affects: libdrm (Ubuntu Precise) Importance: High Assignee: Maarten Lankhorst (mlankhorst) Status: New ** Affects: libdrm (Ubuntu Saucy) Importance: High Assignee: Maarten Lankhorst (mlankhorst) Status: New ** Affects: xorg-lts-transitional (Ubuntu Trusty) Importance: Undecided Assignee: Maarten Lankhorst (mlankhorst) Status: New ** Also affects: libdrm (Ubuntu Precise) Importance: Undecided Status: New ** Also affects: libdrm (Ubuntu Saucy) Importance: Undecided Status: New ** Changed in: libdrm (Ubuntu) Status: New = Invalid ** Changed in: libdrm (Ubuntu Precise) Importance: Undecided = High ** Changed in: libdrm (Ubuntu Saucy) Importance: Undecided = High ** Changed in: libdrm (Ubuntu Precise) Assignee: (unassigned) = Maarten Lankhorst (mlankhorst) ** Changed in: libdrm (Ubuntu Saucy) Assignee: (unassigned) = Maarten Lankhorst (mlankhorst) ** Changed in: libdrm (Ubuntu Precise) Milestone: None = ubuntu-12.04.4 ** Changed in: libdrm (Ubuntu Precise) Milestone: ubuntu-12.04.4 = ubuntu-12.04.5 ** Also affects: xorg-lts-transitional (Ubuntu) Importance: Undecided Status: New ** Also affects: libdrm (Ubuntu Trusty) Importance: Undecided Status: New ** Also affects: xorg-lts-transitional (Ubuntu Trusty) Importance: Undecided Status: New ** No longer affects: xorg-lts-transitional (Ubuntu Precise) ** No longer affects: xorg-lts-transitional (Ubuntu Saucy) ** No longer affects: libdrm (Ubuntu Trusty) ** Changed in: xorg-lts-transitional (Ubuntu Trusty) Assignee: (unassigned) = Maarten Lankhorst (mlankhorst) ** Changed in: xorg-lts-transitional (Ubuntu) Status: New = Invalid ** Also affects: llvm-toolchain-3.4 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-lts-transitional in Ubuntu. https://bugs.launchpad.net/bugs/1318616 Title: lts-trusty enablement in precise Status in “libdrm” package in Ubuntu: Invalid Status in “llvm-toolchain-3.4” package in Ubuntu: New Status in “xorg-lts-transitional” package in Ubuntu: Invalid Status in “libdrm” source package in Precise: New Status in “libdrm” source package in Saucy: New Status in “xorg-lts-transitional” source package in Trusty: New Bug description: Some packages need to be updated for precise. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/1318616/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1300673] Re: Ubuntu Software Center hanged whenever I install ubunu extra codec packs
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: software-center (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-center in Ubuntu. https://bugs.launchpad.net/bugs/1300673 Title: Ubuntu Software Center hanged whenever I install ubunu extra codec packs Status in “software-center” package in Ubuntu: Confirmed Bug description: When i install ubuntu codec extra pack by using ubuntu software center, software center turns to gray and becomes hanged. Ive tried reinstall Ubuntu 14.04 but it doesn't help. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: software-center 13.10-0ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-19.40-generic 3.13.6 Uname: Linux 3.13.0-19-generic i686 ApportVersion: 2.14-0ubuntu1 Architecture: i386 CurrentDesktop: Unity Date: Tue Apr 1 16:05:58 2014 InstallationDate: Installed on 2014-04-01 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta i386 (20140326) PackageArchitecture: all SourcePackage: software-center UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1300673/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318627] Re: lightdm does not cross-build
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: lightdm (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1318627 Title: lightdm does not cross-build Status in “lightdm” package in Ubuntu: Confirmed Bug description: The current lightdm package does not cross-build, dependencies can't be installed: The following packages have unmet dependencies: gobject-introspection:armhf : Depends: python:any:armhf (= 2.7.1-0ubuntu2) Depends: python2.7:armhf but it is not going to be installed Depends: build-essential:armhf but it is not going to be installed Depends: python-mako:armhf but it is not installable gtk-doc-tools : Depends: python (= 2.3) but it is not going to be installed libglib2.0-dev:armhf : Depends: python:any:armhf (= 2.7.1-0ubuntu2) yelp-tools : Depends: itstool but it is not going to be installed E: Build-dependencies for sbuild-build-depends-lightdm-dummy could not be satisfied. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: lightdm 1.11.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.14.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 12 13:33:51 2014 SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1318627/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318627] [NEW] lightdm does not cross-build
Public bug reported: The current lightdm package does not cross-build, dependencies can't be installed: The following packages have unmet dependencies: gobject-introspection:armhf : Depends: python:any:armhf (= 2.7.1-0ubuntu2) Depends: python2.7:armhf but it is not going to be installed Depends: build-essential:armhf but it is not going to be installed Depends: python-mako:armhf but it is not installable gtk-doc-tools : Depends: python (= 2.3) but it is not going to be installed libglib2.0-dev:armhf : Depends: python:any:armhf (= 2.7.1-0ubuntu2) yelp-tools : Depends: itstool but it is not going to be installed E: Build-dependencies for sbuild-build-depends-lightdm-dummy could not be satisfied. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: lightdm 1.11.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.14.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 12 13:33:51 2014 SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: lightdm (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug utopic ** Attachment added: lightdm_1.11.1-0ubuntu1_armhf-20140512-1332.build https://bugs.launchpad.net/bugs/1318627/+attachment/4110546/+files/lightdm_1.11.1-0ubuntu1_armhf-20140512-1332.build -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to lightdm in Ubuntu. https://bugs.launchpad.net/bugs/1318627 Title: lightdm does not cross-build Status in “lightdm” package in Ubuntu: Confirmed Bug description: The current lightdm package does not cross-build, dependencies can't be installed: The following packages have unmet dependencies: gobject-introspection:armhf : Depends: python:any:armhf (= 2.7.1-0ubuntu2) Depends: python2.7:armhf but it is not going to be installed Depends: build-essential:armhf but it is not going to be installed Depends: python-mako:armhf but it is not installable gtk-doc-tools : Depends: python (= 2.3) but it is not going to be installed libglib2.0-dev:armhf : Depends: python:any:armhf (= 2.7.1-0ubuntu2) yelp-tools : Depends: itstool but it is not going to be installed E: Build-dependencies for sbuild-build-depends-lightdm-dummy could not be satisfied. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: lightdm 1.11.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.14.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 12 13:33:51 2014 SourcePackage: lightdm UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1318627/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318621] Re: no need to call 'gnome-update-wallpaper-cache' anymore
** Also affects: gnome-settings-daemon (Ubuntu) Importance: Undecided Status: New ** Also affects: unity-settings-daemon (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1318621 Title: no need to call 'gnome-update-wallpaper-cache' anymore Status in “gnome-settings-daemon” package in Ubuntu: New Status in “ubiquity” package in Ubuntu: New Status in “unity-settings-daemon” package in Ubuntu: New Bug description: These days, g-s-d/u-s-d are running in the installer session, so we don't need to call a binary that forces a redraw of the background just so we can copy the cache across. Once these calls are dropped from ubiquity we can also drop the corresponding binary from g-s-d and u-s-d. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: ubiquity 2.18.8 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.2-0ubuntu2 Architecture: amd64 CurrentDesktop: GNOME Date: Mon May 12 21:53:03 2014 InstallCmdLine: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity InstallationDate: Installed on 2012-09-23 (596 days ago) InstallationMedia: Ubuntu GNOME Remix 12.10 Quantal Quetzal - Alpha amd64(20120922) SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1318621/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318616] Re: lts-trusty enablement in precise
** Also affects: x11proto-gl (Ubuntu) Importance: Undecided Status: New ** Also affects: x11proto-xext (Ubuntu) Importance: Undecided Status: New ** Changed in: x11proto-xext (Ubuntu) Milestone: None = ubuntu-12.04.5 ** Changed in: x11proto-gl (Ubuntu) Milestone: None = ubuntu-12.04.5 ** Changed in: llvm-toolchain-3.4 (Ubuntu) Milestone: None = ubuntu-12.04.5 ** Changed in: llvm-toolchain-3.4 (Ubuntu) Assignee: (unassigned) = Maarten Lankhorst (mlankhorst) ** Changed in: x11proto-gl (Ubuntu) Assignee: (unassigned) = Maarten Lankhorst (mlankhorst) ** Changed in: x11proto-xext (Ubuntu) Assignee: (unassigned) = Maarten Lankhorst (mlankhorst) ** Changed in: x11proto-xext (Ubuntu) Importance: Undecided = High ** Changed in: x11proto-gl (Ubuntu) Importance: Undecided = High ** Changed in: llvm-toolchain-3.4 (Ubuntu) Importance: Undecided = High ** Tags added: lts-trusty precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-lts-transitional in Ubuntu. https://bugs.launchpad.net/bugs/1318616 Title: lts-trusty enablement in precise Status in “libdrm” package in Ubuntu: Invalid Status in “llvm-toolchain-3.4” package in Ubuntu: New Status in “x11proto-gl” package in Ubuntu: New Status in “x11proto-xext” package in Ubuntu: New Status in “xorg-lts-transitional” package in Ubuntu: Invalid Status in “libdrm” source package in Precise: New Status in “libdrm” source package in Saucy: New Status in “xorg-lts-transitional” source package in Trusty: New Bug description: Some packages need to be updated for precise. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/1318616/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318003] Re: [HDA-Intel - HDA VIA VT82xx, playback] Pulseaudio fails to detect card
now what I have to do? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318003 Title: [HDA-Intel - HDA VIA VT82xx, playback] Pulseaudio fails to detect card Status in “alsa-driver” package in Ubuntu: New Bug description: no sound output and output dummy is showed in audio settings instead of VIA VT8237A/VT8251 hda controller ubuntu 14.04 lts ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: Unity Date: Fri May 9 20:02:17 2014 InstallationDate: Installed on 2014-02-25 (73 days ago) InstallationMedia: It SourcePackage: pulseaudio Symptom: audio Symptom_Card: HDA-Intel - HDA VIA VT82xx Title: [HDA-Intel - HDA VIA VT82xx, playback] Pulseaudio fails to detect card UpgradeStatus: Upgraded to trusty on 2014-04-22 (17 days ago) dmi.bios.date: 09/30/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: L2.20 dmi.board.name: 4CoreDual-SATA2. dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrL2.20:bd09/30/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rn4CoreDual-SATA2.:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1318003/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318581] Re: Tooltips for Next and Previous pages are mixed up
Thank you for your bug report, confirming with trusty, that's an error in one of the Ubuntu changeset, I'm going to commit a fix for that and include it in the next update/SRU ** Changed in: evince (Ubuntu) Importance: Undecided = Low ** Changed in: evince (Ubuntu) Status: New = Triaged -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evince in Ubuntu. https://bugs.launchpad.net/bugs/1318581 Title: Tooltips for Next and Previous pages are mixed up Status in “evince” package in Ubuntu: Triaged Bug description: The button for the next page shows the tooltip Previous Page and vice versa. It's a little confusing :) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: evince 3.10.3-0ubuntu10 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 12 09:04:16 2014 InstallationDate: Installed on 2014-03-09 (63 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140308) KernLog: May 12 08:47:42 jarlath-VirtualBox kernel: [ 1542.205458] type=1400 audit(1399880862.706:71): apparmor=STATUS operation=profile_replace profile=unconfined name=/usr/sbin/cups-browsed pid=4413 comm=apparmor_parser May 12 08:47:43 jarlath-VirtualBox kernel: [ 1542.897290] type=1400 audit(1399880863.398:72): apparmor=STATUS operation=profile_replace profile=unconfined name=/usr/sbin/cups-browsed pid=4452 comm=apparmor_parser SourcePackage: evince UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1318581/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318634] [NEW] Xorg freeze on X220 several times / day with normal usage
Public bug reported: Seems to happen more often when resizing or moving windows around. Requires hard reboot (have tried waiting for a few minutes, not known if waiting for longer would resolve it). ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon May 12 15:15:08 2014 DistUpgraded: 2014-05-07 11:45:35,789 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.10, 3.11.0-20-generic, x86_64: installed virtualbox, 4.3.10, 3.13.0-24-generic, x86_64: installed EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GpuHangFrequency: Several times a day GpuHangReproducibility: Seems to happen randomly GpuHangStarted: Since before I upgraded GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21da] InstallationDate: Installed on 2013-10-18 (205 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: LENOVO 42914BG ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: Upgraded to trusty on 2014-05-07 (5 days ago) dmi.bios.date: 08/02/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET51WW (1.21 ) dmi.board.asset.tag: Not Available dmi.board.name: 42914BG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET51WW(1.21):bd08/02/2011:svnLENOVO:pn42914BG:pvrThinkPadX220:rvnLENOVO:rn42914BG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 42914BG dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.11+14.04.20140423-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-4ubuntu5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-4ubuntu5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Mon May 12 15:09:52 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 728 vendor LGD xserver.version: 2:1.15.1-0ubuntu2 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 freeze trusty ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1318634 Title: Xorg freeze on X220 several times / day with normal usage Status in “xorg” package in Ubuntu: New Bug description: Seems to happen more often when resizing or moving windows around. Requires hard reboot (have tried waiting for a few minutes, not known if waiting for longer would resolve it). ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon May 12 15:15:08 2014 DistUpgraded: 2014-05-07 11:45:35,789 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.10, 3.11.0-20-generic, x86_64: installed virtualbox, 4.3.10, 3.13.0-24-generic, x86_64: installed EcryptfsInUse: Yes ExtraDebuggingInterest: Yes GpuHangFrequency: Several times a day GpuHangReproducibility: Seems to happen randomly GpuHangStarted: Since before I upgraded GraphicsCard: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA
[Desktop-packages] [Bug 1318452] Re: .Xmodmap should be read after keyboard layout switch
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: gnome-settings-daemon (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1318452 Title: .Xmodmap should be read after keyboard layout switch Status in “gnome-settings-daemon” package in Ubuntu: New Bug description: Using Ubuntu Gnome 14.04, my .Xmodmap is correctly read at startup (at least, it seems). I have a very simple .Xmodmap: ! EuroSign is on AltGr-5, eacute is mucho more useful for Spanish keycode 26 = e E e E eacute Eacute However, on layout switch, the modification is forgot. Shouldn't .Xmodmap re-read on keyboard layout switch? Alternatively, is there a hook for running scripts on the keyboard layout switch? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1318452/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318303] Re: package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.
*** This bug is a duplicate of bug 1310567 *** https://bugs.launchpad.net/bugs/1310567 ** This bug is no longer a duplicate of bug 1318300 package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 ** This bug has been marked a duplicate of bug 1310567 package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1318303 Title: package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 Status in “gnome-settings-daemon” package in Ubuntu: New Bug description: crash at start-up. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-26.48-generic 3.13.11 Uname: Linux 3.13.0-26-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 Date: Sat May 10 13:41:56 2014 Dependencies: DuplicateSignature: package:gnome-settings-daemon-schemas:3.8.6.1-0ubuntu11:tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 ErrorMessage: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 InstallationDate: Installed on 2012-09-17 (600 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120425-15:28 PackageArchitecture: all SourcePackage: gnome-settings-daemon Title: package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 UpgradeStatus: Upgraded to trusty on 2014-05-10 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1318303/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318327] Re: Can't open .webp files
** Changed in: eog (Ubuntu) Status: New = Triaged ** Changed in: eog (Ubuntu) Importance: Undecided = Wishlist ** Bug watch added: GNOME Bug Tracker #700751 https://bugzilla.gnome.org/show_bug.cgi?id=700751 ** Also affects: eog via https://bugzilla.gnome.org/show_bug.cgi?id=700751 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to eog in Ubuntu. https://bugs.launchpad.net/bugs/1318327 Title: Can't open .webp files Status in Eye of GNOME: Unknown Status in “eog” package in Ubuntu: Triaged Bug description: Please, add webp support. To manage notifications about this bug go to: https://bugs.launchpad.net/eog/+bug/1318327/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318300] Re: package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.
*** This bug is a duplicate of bug 1310567 *** https://bugs.launchpad.net/bugs/1310567 ** This bug has been marked a duplicate of bug 1310567 package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1318300 Title: package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 Status in “gnome-settings-daemon” package in Ubuntu: New Bug description: crash at start-up. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-26.48-generic 3.13.11 Uname: Linux 3.13.0-26-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 Date: Sat May 10 13:41:56 2014 Dependencies: DuplicateSignature: package:gnome-settings-daemon-schemas:3.8.6.1-0ubuntu11:tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 ErrorMessage: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 InstallationDate: Installed on 2012-09-17 (600 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120425-15:28 PackageArchitecture: all SourcePackage: gnome-settings-daemon Title: package gnome-settings-daemon-schemas 3.8.6.1-0ubuntu11 failed to install/upgrade: tentative de remplacement de « /usr/share/GConf/gsettings/gnome-settings-daemon.convert », qui appartient aussi au paquet gnome-settings-daemon 3.10.2-0ubuntu1~saucy6 UpgradeStatus: Upgraded to trusty on 2014-05-10 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1318300/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318424] Re: Log file can not be opened
thank you for your bug report, that seems similar to e.g bug #1010402 ** Changed in: gedit (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gedit in Ubuntu. https://bugs.launchpad.net/bugs/1318424 Title: Log file can not be opened Status in “gedit” package in Ubuntu: New Bug description: Attached file can not be opened by gedit on Ubuntu 12.04. I get the error: Invalid byte sequence in conversion input To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gedit/+bug/1318424/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318370] Re: Guest Session dialog not in the middle
** Changed in: unity (Ubuntu) Importance: Undecided = Low ** Package changed: unity (Ubuntu) = compiz (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to compiz in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1318370 Title: Guest Session dialog not in the middle Status in “compiz” package in Ubuntu: New Bug description: Upon starting the Guest Session, the Guest Session dialog does not appear in the middle. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1318370/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318301] Re: package gnome-control-center-shared-data (not installed) failed to install/upgrade: tentative de remplacement de « /usr/share/pixmaps/faces/launch.jpg », qui appar
** Package changed: gnome-control-center (Ubuntu) = ubuntu-gnome -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1318301 Title: package gnome-control-center-shared-data (not installed) failed to install/upgrade: tentative de remplacement de « /usr/share/pixmaps/faces/launch.jpg », qui appartient aussi au paquet gnome-control-center-data 1:3.10.1-0ubuntu1~saucy3 Status in Ubuntu GNOME: New Bug description: crash at start-up. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: gnome-control-center-shared-data (not installed) ProcVersionSignature: Ubuntu 3.13.0-26.48-generic 3.13.11 Uname: Linux 3.13.0-26-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 Date: Sat May 10 21:58:53 2014 DuplicateSignature: package:gnome-control-center-shared-data:(not installed):tentative de remplacement de « /usr/share/pixmaps/faces/launch.jpg », qui appartient aussi au paquet gnome-control-center-data 1:3.10.1-0ubuntu1~saucy3 ErrorMessage: tentative de remplacement de « /usr/share/pixmaps/faces/launch.jpg », qui appartient aussi au paquet gnome-control-center-data 1:3.10.1-0ubuntu1~saucy3 InstallationDate: Installed on 2012-09-17 (600 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120425-15:28 SourcePackage: gnome-control-center Title: package gnome-control-center-shared-data (not installed) failed to install/upgrade: tentative de remplacement de « /usr/share/pixmaps/faces/launch.jpg », qui appartient aussi au paquet gnome-control-center-data 1:3.10.1-0ubuntu1~saucy3 UpgradeStatus: Upgraded to trusty on 2014-05-10 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-gnome/+bug/1318301/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318124] Re: nautilus does not recall sftp password across user sessions
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Package changed: nautilus (Ubuntu) = gvfs (Ubuntu) ** Changed in: gvfs (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1318124 Title: nautilus does not recall sftp password across user sessions Status in “gvfs” package in Ubuntu: New Bug description: I created a bookmark in nautilus to access a server via sftp. When I'm asked to Enter password for $IP_ADDRESS$, I enter my credentials and choose Remember forever. I can see the stored credentials in the application seahorse. However, after logging my user out, logging back in, and accessing the sftp server, I'm asked to enter my credentials again. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: nautilus 1:3.10.1-0ubuntu9 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Sat May 10 08:11:00 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/nautilus GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-zoom-level' b'smaller' b'org.gnome.nautilus.list-view' b'default-column-order' b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 'permissions', 'mime_type', 'where'] InstallationDate: Installed on 2014-05-08 (1 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1318124/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318199] Re: Can't change password
** Changed in: unity-control-center (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1318199 Title: Can't change password Status in “unity-control-center” package in Ubuntu: New Bug description: When attempting to change my password since update to 14.04, the Change button is disabled. The UI claims my password is Not good enough, probably because it's not complex according to it's rules. Choosing a different password with difference characters seems to work cause this to change and the button enables. While it's perfectly reasonable and useful to for the OS to provide feedback on its opinion of password quality, it is my view that it's not appropriate for the a personal computer to over-rule the decisions of its user with respect to password choices. For this reason, and that it's a change in behaviour since the previous version, I think this should be treated as a bug. It's possible to change the password with passwd. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity-control-center 14.04.3+14.04.20140410-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Sat May 10 16:32:51 2014 EcryptfsInUse: Yes ExecutablePath: /usr/bin/unity-control-center InstallationDate: Installed on 2013-05-07 (367 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: unity-control-center UpgradeStatus: Upgraded to trusty on 2014-04-28 (12 days ago) usr_lib_unity-control-center: activity-log-manager 0.9.7-0ubuntu14 deja-dup 30.0-0ubuntu4 gnome-control-center 1:3.6.3-0ubuntu56.1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-control-center/+bug/1318199/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318267] Re: User name remains checked after logout
** Package changed: compiz (Ubuntu) = indicator-session (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to compiz in Ubuntu. https://bugs.launchpad.net/bugs/1318267 Title: User name remains checked after logout Status in “indicator-session” package in Ubuntu: New Bug description: login to userA click on upper right panel applet login to userB logout from userB log back in to userA click on upper right panel applet userA has a check beside it (ok) userB has a check beside it (not ok) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: compiz-core 1:0.9.11+14.04.20140409-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Sat May 10 21:03:31 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.10, 3.13.0-24-generic, i686: installed EcryptfsInUse: Yes ExecutablePath: /usr/bin/compiz GraphicsCard: Subsystem: Dell Device [1028:0581] NVIDIA Corporation GF119 [GeForce GT 620 OEM] [10de:1049] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device [10de:0977] InstallationDate: Installed on 2014-04-29 (11 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release i386 (20140417) MachineType: Dell Inc. Inspiron 660 ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=8cf458ab-4ff9-4505-9a16-27da1ea7ec10 ro quiet splash vt.handoff=7 SourcePackage: compiz UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/14/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A11 dmi.board.name: 0XR1GT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA11:bd10/14/2013:svnDellInc.:pnInspiron660:pvr:rvnDellInc.:rn0XR1GT:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11+14.04.20140409-0ubuntu1 version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0-4ubuntu5 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0-4ubuntu5 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Sat May 10 11:27:08 2014 xserver.configfile: default xserver.errors: Failed to load module nvidia (module does not exist, 0) Failed to load module nvidia (module does not exist, 0) xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.15.1-0ubuntu2 xserver.video_driver: nouveau To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-session/+bug/1318267/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 298552] Re: Unable to mount digital camera -- Error initializing camera: -53: Could not claim the USB device
*** This bug is a duplicate of bug 267238 *** https://bugs.launchpad.net/bugs/267238 Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: libgphoto2 (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libgphoto2 in Ubuntu. https://bugs.launchpad.net/bugs/298552 Title: Unable to mount digital camera -- Error initializing camera: -53: Could not claim the USB device Status in “libgphoto2” package in Ubuntu: Confirmed Bug description: On Jaunty test system, could not mount USB digital camera -- received error message Error initializing camera: -53: Could not claim the USB device. I found that /etc/udev/rules.d/45-libgphoto2.rules was missing. I tried reinstalling libgphoto2-2 but the file was not installed (would this have been installed with a different package?). Downloaded extra copy from http://webs.ono.com/jesusvpct/45-libgphoto2.rules and the camera now mounts fine. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libgphoto2/+bug/298552/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317696] [NEW] Upstream dconf db settings for Ibus do not work correctly with Ubuntu
You have been subscribed to a public bug: Ubuntu has changed how it handles input switching and no longer relies on the Ibus hotkey/trigger settings. The default upstream Ibus keybindings for input switching, however, are still installed unchanged in Ubuntu. As a result, Control+Space, the default Ibus keybinding for input swithing, is needlessly set in the dconf db. This keybinding overrides Control+Space in other applications, notably Emacs and Eclipse auto- complete. The default dconf db settings for Ibus are loaded by /etc/dconf/db/ibus/00-upstream-settings. The default settings in question are: trigger=['Control+space', 'Zenkaku_Hankaku', 'Alt+Kanji', 'Alt+grave', 'Hangul', 'Alt+Release+Alt_R'] triggers=['Controlspace'] It's hard for most users to figure this out and the problem could be easily avoided by changing the default settings supplied from upstream. This applies to 12.04, 13.10, 14.04. ** Affects: ibus (Ubuntu) Importance: Undecided Assignee: Aron Xu (happyaron) Status: New -- Upstream dconf db settings for Ibus do not work correctly with Ubuntu https://bugs.launchpad.net/bugs/1317696 You received this bug notification because you are a member of Desktop Packages, which is subscribed to ibus in Ubuntu. -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318576] Re: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED
** Description changed: - I'm using Ubuntu 14.10, the package (maybe) is 1.0.25+dfsg-0ubuntu4. I - think also pulseaudio is involved with this problem. It is pulseaudio + I'm using Ubuntu 14.10, the package is 1.0.25+dfsg-0ubuntu4. I think + also pulseaudio is involved with this problem. It is pulseaudio 1:4.0-0ubuntu11. No sound is played, neither with speakers nor with headphones. Sometimes it works with sudo alsa force-reload but there's always some problem while unloading the plugin (it seems to be used by some process). After an uninstall and reinstall of alsa-base and pulseaudio my audio icon disappeared and there's no way to get audio back. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: michele8874 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC0: michele8874 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:55:48 2014 InstallationDate: Installed on 2013-11-18 (174 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Audio interno - HDA Intel PCH Symptom_DevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: michele8874 F pulseaudio - michele9464 F alsamixer + USERPID ACCESS COMMAND + /dev/snd/controlC0: michele8874 F pulseaudio + michele9464 F alsamixer Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to trusty on 2014-04-30 (12 days ago) dmi.bios.date: 03/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VD.411 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VD.411:bd03/11/2013:svnASUSTeKCOMPUTERINC.:pnK55VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318576 Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED Status in “alsa-driver” package in Ubuntu: New Bug description: I'm using Ubuntu 14.10, the package is 1.0.25+dfsg-0ubuntu4. I think also pulseaudio is involved with this problem. It is pulseaudio 1:4.0-0ubuntu11. No sound is played, neither with speakers nor with headphones. Sometimes it works with sudo alsa force-reload but there's always some problem while unloading the plugin (it seems to be used by some process). After an uninstall and reinstall of alsa-base and pulseaudio my audio icon disappeared and there's no way to get audio back. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:55:48 2014 InstallationDate: Installed on 2013-11-18 (174 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Audio interno - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio michele9464 F alsamixer Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to trusty on 2014-04-30 (12 days ago) dmi.bios.date: 03/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VD.411 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC.
[Desktop-packages] [Bug 1317752] Re: Right-clicking a file, choosing Open With - Other Application provides no way to run an arbitrary command on the file
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: nautilus (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1317752 Title: Right-clicking a file, choosing Open With - Other Application provides no way to run an arbitrary command on the file Status in “nautilus” package in Ubuntu: New Bug description: I installed Sublime Text 3 from a third-party source. That installed and worked fine, and it shows up in the Applications menu as normal. When I right click any file (I've tried Makefiles and .txt files), click Open With, then click Other Application, there's a list of possible programs I can open the given file from. Problem is, if the program I want to use isn't on that list, I can't use it--i.e. I can't put in an arbitrary command that can be saved and used in the future. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: nautilus 1:3.8.2-0ubuntu2.2 ProcVersionSignature: Ubuntu 3.11.0-19.33-generic 3.11.10.5 Uname: Linux 3.11.0-19-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Fri May 9 02:03:14 2014 EcryptfsInUse: Yes GsettingsChanges: b'org.gnome.nautilus.window-state' b'geometry' b'800x550+0+24' b'org.gnome.nautilus.window-state' b'maximized' b'true' InstallationDate: Installed on 2013-09-26 (224 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MarkForUpload: True SourcePackage: nautilus UpgradeStatus: Upgraded to saucy on 2013-11-01 (188 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1317752/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317895] Re: facebook images isn't shown but instead a link
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: empathy (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/1317895 Title: facebook images isn't shown but instead a link Status in “empathy” package in Ubuntu: New Bug description: When receiving a image in a Facebook message no image is shown, but is instead linked and has to be opened in a browser. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: empathy 3.8.6-0ubuntu9 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Fri May 9 14:41:29 2014 InstallationDate: Installed on 2014-04-09 (29 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140323) ProcEnviron: LANGUAGE=sv PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=sv_SE.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/1317895/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1188425] Re: Audio breaks up and pulseaudio eventually crashes with Alsa a52 (ac3) plugin (Ubuntu 13.04)
Yes this bug affects all ubuntu releases since at least 13.04 No I haven't found a solution yet. This was the best I came up with. You can try to increase the default-fragments number but that will increase latency. A number of 5 is a compromise between latency and probability of crash. I suggest you use Alexander Patrakov's dca alsa plugin http://aepatrakov.narod.ru/index/0-2 Its main disadvantage is the higher cpu usage! However it doesn't suffer from this bug. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1188425 Title: Audio breaks up and pulseaudio eventually crashes with Alsa a52 (ac3) plugin (Ubuntu 13.04) Status in “pulseaudio” package in Ubuntu: New Bug description: I am encoding all audio in AC3 and sending it to my Logitech Z-5500 speakers through the SPDIF out jack on my laptop. Audio works fine for a while until it breaks up randomly and pulseaudio eventually crashes. By looking to the pulseaudio logs one can see some buffer underruns. I also tested with the 3.9.4 mainline kernel though I am not sure this issue is driver related. The result is always the same! I have this in /usr/share/alsa/alsa.conf.d/a52.conf pcm.a52 { @args [CARD] @args.CARD { type string } type rate slave { pcm { type a52 format S16_LE # S16_LE, S16_BE channels 6 # 2, 4, 6 bitrate 640 # 192, 224, 256, 320, 384, 448, 512, 576, 640 card $CARD } rate 48000 # 44100, 48000 } } One other thing I tried was the dcaenc-2 alsa plugin from this web page http://aepatrakov.narod.ru/index/0-2 and this plugin appears to not have the same problem. The disadvantage of the dca plugin is that it needs a lot more processing power! So I would prefer the a52 plugin if it worked flawlessly. These are the answers to the first two questions: 1) Ubuntu 13.04 2) libasound2-plugins-extra: Installed: 1.0.25-2ubuntu3 Candidate: 1.0.25-2ubuntu3 Version table: *** 1.0.25-2ubuntu3 0 500 http://pt.archive.ubuntu.com/ubuntu/ raring/universe amd64 Packages 100 /var/lib/dpkg/status To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1188425/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1304696] Re: Gnome calculator is not focused when it is started by keyboard shortcut
unity needs to export the timestamp of the event to u-s-d, similar to https://bugzilla.gnome.org/show_bug.cgi?id=704859 ** Changed in: gnome-calculator (Ubuntu) Status: Confirmed = Invalid ** Changed in: gnome-calculator (Ubuntu) Importance: Undecided = Low ** Changed in: unity-settings-daemon (Ubuntu) Importance: Undecided = Low ** Also affects: unity (Ubuntu) Importance: Undecided Status: New ** Changed in: unity (Ubuntu) Importance: Undecided = Low ** Changed in: unity (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-calculator in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1304696 Title: Gnome calculator is not focused when it is started by keyboard shortcut Status in “gnome-calculator” package in Ubuntu: Invalid Status in “unity” package in Ubuntu: Confirmed Status in “unity-settings-daemon” package in Ubuntu: Confirmed Bug description: Description of problem: When I use the Calculator key of my keyboard, the gnome-calculator opens but does not receive focus. Version-Release: Ubuntu Trusty Tahr (development branch) Release: 14.04 gnome-calculator 3.10.2-0ubuntu1 amd64 How reproducible: Always. Steps to Reproduce: 1. Start Calculator by a media-key as configured in Keyboard settings Actual results: Calculator's window is not focused Expected results: Calculator's window should focused. Additional info: Ir worked fine in 12.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-calculator/+bug/1304696/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317898] Re: no way of sending images or other files using empathy
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: empathy (Ubuntu) Importance: Undecided = Wishlist -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/1317898 Title: no way of sending images or other files using empathy Status in “empathy” package in Ubuntu: New Bug description: There's no way of sending images or other kind of files to contacts in Empathy. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: empathy 3.8.6-0ubuntu9 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Fri May 9 14:44:15 2014 InstallationDate: Installed on 2014-04-09 (29 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140323) ProcEnviron: LANGUAGE=sv PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=sv_SE.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/1317898/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317696] Re: Upstream dconf db settings for Ibus do not work correctly with Ubuntu
Thank you for your bug report. Aron, could you have a look if we should change something there? ** Package changed: d-conf (Ubuntu) = ibus (Ubuntu) ** Changed in: ibus (Ubuntu) Assignee: (unassigned) = Aron Xu (happyaron) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ibus in Ubuntu. https://bugs.launchpad.net/bugs/1317696 Title: Upstream dconf db settings for Ibus do not work correctly with Ubuntu Status in “ibus” package in Ubuntu: New Bug description: Ubuntu has changed how it handles input switching and no longer relies on the Ibus hotkey/trigger settings. The default upstream Ibus keybindings for input switching, however, are still installed unchanged in Ubuntu. As a result, Control+Space, the default Ibus keybinding for input swithing, is needlessly set in the dconf db. This keybinding overrides Control+Space in other applications, notably Emacs and Eclipse auto- complete. The default dconf db settings for Ibus are loaded by /etc/dconf/db/ibus/00-upstream-settings. The default settings in question are: trigger=['Control+space', 'Zenkaku_Hankaku', 'Alt+Kanji', 'Alt+grave', 'Hangul', 'Alt+Release+Alt_R'] triggers=['Controlspace'] It's hard for most users to figure this out and the problem could be easily avoided by changing the default settings supplied from upstream. This applies to 12.04, 13.10, 14.04. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1317696/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318424] Re: Log file can not be opened
Yes, the other bug is similar, but the error message was different. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gedit in Ubuntu. https://bugs.launchpad.net/bugs/1318424 Title: Log file can not be opened Status in “gedit” package in Ubuntu: New Bug description: Attached file can not be opened by gedit on Ubuntu 12.04. I get the error: Invalid byte sequence in conversion input To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gedit/+bug/1318424/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317629] Re: Colors and gradient wallpaper not displayed during login
*** This bug is a duplicate of bug 918941 *** https://bugs.launchpad.net/bugs/918941 ** This bug has been marked a duplicate of bug 918941 Dynamic wallpaper change doesn't respect solid color/gradient background -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-greeter in Ubuntu. https://bugs.launchpad.net/bugs/1317629 Title: Colors and gradient wallpaper not displayed during login Status in “unity-greeter” package in Ubuntu: Confirmed Bug description: I am using Ubuntu 14.04 updated to the latest as of May 8, 2014. After I have changed the wallpaper to Colors and gradient i.e. using some custom solid color wallpaper, it is not displayed at the login screen. Instead the default wallpaper is displayed. However, things go well at the lock screen though. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-greeter/+bug/1317629/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1317517] Re: Transparent area background filled with black in pdf
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: cairo (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cairo in Ubuntu. https://bugs.launchpad.net/bugs/1317517 Title: Transparent area background filled with black in pdf Status in “cairo” package in Ubuntu: New Bug description: The attached pdf when viewed in evince looks correct but when run through the print preview or printed, the partially transparent image with a white background has a black background instead. This is with 14.04 release and cairo 1.13.0-20140204-0ubuntu1. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cairo/+bug/1317517/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318003] Re: [HDA-Intel - HDA VIA VT82xx, playback] Pulseaudio fails to detect card
https://bugzilla.kernel.org/enter_bug.cgi?product=Drivers select component (alsa) do your computer have more than 4G Memory ? snd_hda_intel :80:01.0: PCI: disallowing double address cycle for device -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318003 Title: [HDA-Intel - HDA VIA VT82xx, playback] Pulseaudio fails to detect card Status in “alsa-driver” package in Ubuntu: New Bug description: no sound output and output dummy is showed in audio settings instead of VIA VT8237A/VT8251 hda controller ubuntu 14.04 lts ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic i686 ApportVersion: 2.14.1-0ubuntu3 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: Unity Date: Fri May 9 20:02:17 2014 InstallationDate: Installed on 2014-02-25 (73 days ago) InstallationMedia: It SourcePackage: pulseaudio Symptom: audio Symptom_Card: HDA-Intel - HDA VIA VT82xx Title: [HDA-Intel - HDA VIA VT82xx, playback] Pulseaudio fails to detect card UpgradeStatus: Upgraded to trusty on 2014-04-22 (17 days ago) dmi.bios.date: 09/30/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: L2.20 dmi.board.name: 4CoreDual-SATA2. dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrL2.20:bd09/30/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rn4CoreDual-SATA2.:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1318003/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316343] Re: Totem freezes when selecting subtitle
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: totem (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/1316343 Title: Totem freezes when selecting subtitle Status in “totem” package in Ubuntu: New Bug description: When selecting a subtitle when something is playing in the background it freezes. If you pause a video and select a subtitle it will not freeze. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: totem 3.10.1-1ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Mon May 5 18:38:40 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-04-14 (21 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: totem UpgradeStatus: Upgraded to trusty on 2014-04-18 (17 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/totem/+bug/1316343/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316648] Re: gedit hangs on start
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: gedit (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gedit in Ubuntu. https://bugs.launchpad.net/bugs/1316648 Title: gedit hangs on start Status in “gedit” package in Ubuntu: New Bug description: When trying to start gedit on Ubuntu 14.04 it hangs for a long time (longer than 5 minutes) without opening a window. Sometimes when I come back to the laptop 30 minutes or more later it has finally opened a gedit window. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gedit 3.10.4-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-16.36-generic 3.13.5 Uname: Linux 3.13.0-16-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Tue May 6 11:13:44 2014 InstallationDate: Installed on 2014-03-09 (57 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140309) SourcePackage: gedit UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gedit/+bug/1316648/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316031] Re: i cant login to my gmail account via empathy messanger
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: empathy (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/1316031 Title: i cant login to my gmail account via empathy messanger Status in “empathy” package in Ubuntu: New Bug description: i cant login to my gmail account via empathy messanger ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: empathy 3.8.6-0ubuntu9 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: XFCE Date: Mon May 5 13:15:33 2014 InstallationDate: Installed on 2014-05-01 (3 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/1316031/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318576] Re: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED
speaker is muted when you plug headphone try hda-jack-sense-test when you plug and unplug headphone control.18 { iface CARD name 'Headphone Jack' value true comment { access read type BOOLEAN count 1 } } ** Changed in: alsa-driver (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318576 Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: I'm using Ubuntu 14.10, the package is 1.0.25+dfsg-0ubuntu4. I think also pulseaudio is involved with this problem. It is pulseaudio 1:4.0-0ubuntu11. No sound is played, neither with speakers nor with headphones. Sometimes it works with sudo alsa force-reload but there's always some problem while unloading the plugin (it seems to be used by some process). After an uninstall and reinstall of alsa-base and pulseaudio my audio icon disappeared and there's no way to get audio back. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:55:48 2014 InstallationDate: Installed on 2013-11-18 (174 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Audio interno - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio michele9464 F alsamixer Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to trusty on 2014-04-30 (12 days ago) dmi.bios.date: 03/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VD.411 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VD.411:bd03/11/2013:svnASUSTeKCOMPUTERINC.:pnK55VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1318576/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1316181] Re: Evolution only checks for new IMAP+ mail on start
Thank you for taking the time to report this bug and helping to make Ubuntu better. The issue you are reporting is an upstream one and it would be nice if somebody having it could send the bug to the developers of the software by following the instructions at https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please tell us the number of the upstream bug (or the link), so we can add a bugwatch that will inform us about its status. Thanks in advance. ** Changed in: evolution (Ubuntu) Importance: Undecided = Low -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1316181 Title: Evolution only checks for new IMAP+ mail on start Status in “evolution” package in Ubuntu: New Bug description: This is new behaviour as of upgrade to Tahr. IMAP+ inbox summary requests appear to only take place when evolution starts. Otherwise they just hang. The note at the bottom reads, Pinging IMAP server on XXX.com. Other mail programs work fine with the same mail servers. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: evolution 3.10.4-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: LXDE Date: Mon May 5 07:58:43 2014 InstallationDate: Installed on 2014-01-02 (122 days ago) InstallationMedia: Lubuntu 13.10 Saucy Salamander - Release amd64 (20131016) ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set SHELL=/bin/tcsh SourcePackage: evolution UpgradeStatus: Upgraded to trusty on 2014-05-01 (3 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1316181/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318576] Re: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED
The problem is not about plugging or unplugging the headphone. If i don't connect any headphone the problem still persist. I tried also alsamixer but nothing was at 0 or muted. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318576 Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: I'm using Ubuntu 14.10, the package is 1.0.25+dfsg-0ubuntu4. I think also pulseaudio is involved with this problem. It is pulseaudio 1:4.0-0ubuntu11. No sound is played, neither with speakers nor with headphones. Sometimes it works with sudo alsa force-reload but there's always some problem while unloading the plugin (it seems to be used by some process). After an uninstall and reinstall of alsa-base and pulseaudio my audio icon disappeared and there's no way to get audio back. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:55:48 2014 InstallationDate: Installed on 2013-11-18 (174 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Audio interno - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio michele9464 F alsamixer Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to trusty on 2014-04-30 (12 days ago) dmi.bios.date: 03/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VD.411 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VD.411:bd03/11/2013:svnASUSTeKCOMPUTERINC.:pnK55VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1318576/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318576] Re: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED
ports: analog-output-speaker: Altoparlanti (priority 1, latency offset 0 usec, available: no) properties: device.icon_name = audio-speakers analog-output-headphones: Cuffie analogiche (priority 9000, latency offset 0 usec, available: yes) properties: device.icon_name = audio-headphones active port: analog-output-headphones amp out vals [ 0x80 0x80] speaker is muted Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Control: name=Speaker Playback Switch, index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name=Speaker Phantom Jack, index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 2 0x0c 0x0d* -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318576 Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: I'm using Ubuntu 14.10, the package is 1.0.25+dfsg-0ubuntu4. I think also pulseaudio is involved with this problem. It is pulseaudio 1:4.0-0ubuntu11. No sound is played, neither with speakers nor with headphones. Sometimes it works with sudo alsa force-reload but there's always some problem while unloading the plugin (it seems to be used by some process). After an uninstall and reinstall of alsa-base and pulseaudio my audio icon disappeared and there's no way to get audio back. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:55:48 2014 InstallationDate: Installed on 2013-11-18 (174 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Audio interno - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio michele9464 F alsamixer Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to trusty on 2014-04-30 (12 days ago) dmi.bios.date: 03/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VD.411 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VD.411:bd03/11/2013:svnASUSTeKCOMPUTERINC.:pnK55VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1318576/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1318576] Re: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED
I see. I tried to run your command but was not found. I'm a little noob, so could you tell me what i have to do? I repeat, i pushed all the values on alsamixer to 100 but nothing still works. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1318576 Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all - AUDIO ICON ON TOOLBAR DISAPPEARED Status in “alsa-driver” package in Ubuntu: Incomplete Bug description: I'm using Ubuntu 14.10, the package is 1.0.25+dfsg-0ubuntu4. I think also pulseaudio is involved with this problem. It is pulseaudio 1:4.0-0ubuntu11. No sound is played, neither with speakers nor with headphones. Sometimes it works with sudo alsa force-reload but there's always some problem while unloading the plugin (it seems to be used by some process). After an uninstall and reinstall of alsa-base and pulseaudio my audio icon disappeared and there's no way to get audio back. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio CurrentDesktop: Unity Date: Mon May 12 11:55:48 2014 InstallationDate: Installed on 2013-11-18 (174 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed Symptom_Card: Audio interno - HDA Intel PCH Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: michele8874 F pulseaudio michele9464 F alsamixer Symptom_Jack: Speaker, Internal Symptom_Type: No sound at all Title: [K55VD, Realtek ALC270, Speaker, Internal] No sound at all UpgradeStatus: Upgraded to trusty on 2014-04-30 (12 days ago) dmi.bios.date: 03/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VD.411 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VD dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VD.411:bd03/11/2013:svnASUSTeKCOMPUTERINC.:pnK55VD:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VD:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VD dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1318576/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1226962] Re: Hotkeys not functional in non-latin keyboard layout in 13.10 and 14.04
Hi DEDan, where can that client be downloaded? Also, what do you mean by keyboard input stops working? That doesn't sound like a problem with the PPA... -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-terminal in Ubuntu. https://bugs.launchpad.net/bugs/1226962 Title: Hotkeys not functional in non-latin keyboard layout in 13.10 and 14.04 Status in LibreOffice Productivity Suite: Confirmed Status in IBus: New Status in Indicator keyboard: Fix Released Status in Inkscape: A Vector Drawing Tool: New Status in Mutter: Fix Released Status in The OpenOffice.org Suite: New Status in Unity: Fix Released Status in “gnome-settings-daemon” package in Ubuntu: Triaged Status in “gnome-terminal” package in Ubuntu: Triaged Status in “indicator-keyboard” package in Ubuntu: Triaged Status in “kingsoft-office” package in Ubuntu: Confirmed Status in “openjdk-7” package in Ubuntu: Confirmed Status in “unity” package in Ubuntu: Triaged Status in “unity-settings-daemon” package in Ubuntu: Triaged Status in “gnome-settings-daemon” package in Fedora: Unknown Status in “gnome-shell” package in Fedora: Unknown Bug description: New keyboard layout changer in Ubuntu 13.10 introduce old-new bug. Any system or application hotkey witch use char (for example: ctrl+alt+t for terminal or ctrl+t for new tab in browser) become unfunctional when selected non-latin keyboard layout. Hotkeys with F1-12, numbers and other non-character buttons works perfectly. Window manager hotkeys not affected by this bug. All hotkeys in system parameters-keyboard-hotkeys-windows works perfect with any keyboard layout. Workaround for some system hotkeys and two layouts (english and non- latin): rebind all hotkeys in your local layout. For example instead of ctrl+alt+t use ctrl+alt+τ (greek tau). That hotkey still work with english layout. If you use english and two different non-latin layouts this workaround helps only with one of them. Dear Ubuntu users and developers! Please include the following information to your comment about non-latin shortcuts problems: 1. What Ubuntu version do you have (Ubuntu 13.10, Ubuntu 13.10 GNOME, Ubuntu 14.04, Ubuntu 14.04 GNOME and so on), upgraded (describe version) or clean installed 2. What keyboard layout do you have 3. What shortcut for keyboard layout switching do you use 4. On which session you have problems - that is one from Unity, GNOME Shell, GNOME FlashBack/Fallback (Metacity), GNOME FlashBack/Fallback (Compiz) 5. With which program and its version and origin (Ubuntu repositories, PPA, non-deb binary package from some website) you have problems. By providing this information you can make bug-fixing much simpler and may be faster. -- For other layout switching problems introduced in Ubuntu 13.10 you can see bug 1218322. -- To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1226962/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp