Re: [Dx4win] 7.06 won't set split on K3
This might might get it going for you. Download and install DX4WIN 7.07. Use the Elecraft K3 X4 rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
Thanks Bob. I was not using LP Bridge at the time, but I will keep this in mind when I do. I suspect that using the K3 X4 rig definition may resolve it. I saw that, but I did not know what its purpose was so I did not try it. 73, Bob W5OV This might might get it going for you. Download and install DX4WIN 7.07. Use the Elecraft K3 X4 rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
I just tried it with my K3 and all is working fine..guess I should have asked what the difference between the K3 and the K3 X4 settings were. 73's, Bill, AA7X -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of w...@w5ov.com Sent: Tuesday, February 03, 2009 12:07 PM To: Bob Thompson - N9SF Cc: Larry Phipps; Robert Naumann; dx4win@mailman.qth.net Subject: Re: [Dx4win] 7.06 won't set split on K3 Thanks Bob. I was not using LP Bridge at the time, but I will keep this in mind when I do. I suspect that using the K3 X4 rig definition may resolve it. I saw that, but I did not know what its purpose was so I did not try it. 73, Bob W5OV This might might get it going for you. Download and install DX4WIN 7.07. Use the Elecraft K3 X4 rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7.06 won't set split on K3
It works perfectly for me now as I have just QSYed to 14094 for FW5RE and my K3 is set to split mode and VFO B is on the correct split frequency. I am also running LP Bridge now too, and everything is working perfectly. 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Bill Eisinger Sent: Tuesday, February 03, 2009 5:45 PM To: w...@w5ov.com; 'Bob Thompson - N9SF' Cc: 'Larry Phipps'; dx4win@mailman.qth.net Subject: Re: [Dx4win] 7.06 won't set split on K3 I just tried it with my K3 and all is working fine..guess I should have asked what the difference between the K3 and the K3 X4 settings were. 73's, Bill, AA7X -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of w...@w5ov.com Sent: Tuesday, February 03, 2009 12:07 PM To: Bob Thompson - N9SF Cc: Larry Phipps; Robert Naumann; dx4win@mailman.qth.net Subject: Re: [Dx4win] 7.06 won't set split on K3 Thanks Bob. I was not using LP Bridge at the time, but I will keep this in mind when I do. I suspect that using the K3 X4 rig definition may resolve it. I saw that, but I did not know what its purpose was so I did not try it. 73, Bob W5OV This might might get it going for you. Download and install DX4WIN 7.07. Use the Elecraft K3 X4 rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: I looked through the archives, and I did not see a response to Steve's question below. I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] 7.06 won't set split on K3
I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
