Re: [Dx4win] dx4win and FT5000
I'll add another comment. Having opened my big fingers with comment (below) that everything was OK when I set preferences to FT2000, I now amplify the problems. I did find the FT5000 rig support choice in V8.05, and chose it in radio control section of Preferences. Whenever I set QSO | Add realtime using this selection and the FT5000 rig , I get error message from DX4WIN that says radio timed out. End of story. And, having looked very carefully at the DX4WIN operation with the FT2000 rig choice in Preferences ( I went back an chose it in Preferences), I now find that the PSK31 mode (which I seldom if ever use) does NOT set the DX4WIN mode window. All other modes (AM, FM, CW, SSB, RTTY) get set properly. I realize I am not matching the rig to the rig radio control selection in preferences, but it is odd that all the other modes get recognized. So, 1, I was wrong in saying things were fine with FT2000 selected as radio control (while operating the FT5000) 2. Choosing the FT5000 as radio control rig in Preferences does not work at all. I'm puzzled. 73 de NN3V -Original Message- From: on4iq [mailto:on...@telenet.be] Sent: Friday, April 01, 2011 17:46 To: Charles Ristorcelli Subject: Re: [Dx4win] dx4win and FT5000 - Original Message - From: Charles Ristorcelli cristorce...@san.rr.com To: 'on4iq' on...@telenet.be Sent: Friday, April 01, 2011 7:21 PM Subject: RE: [Dx4win] dx4win and FT5000 Just to add fuel to the fire, I am running V8.05 with my FT5000. Operating system is Windows 7 Home Premium. I could not find FT5000 among supported rigs in V8.05. So I left the radio preference as FT2000. Software and rig work fine. I am going to go back and see if I missed the FT5000 as a V8.05 supported radio. 73 de NN3V, Charlie -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of on4iq Sent: Friday, April 01, 2011 8:02 AM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] dx4win and FT5000 I'll give an extra lead, even on RX this happens. in the dxwin 8.04 and 8.05 (yes i installed 8.05 with the latest rig files) Let me explain: the mode it changes to, its dictated by the packet dxcluster spot that enters. Occasionally even the BAND in the main dx4win screen changes shortly to the spot (frequency) that arrives, most annoying feature.. RIG in SSB - dx4win mode stays OK, but freq in Freq box jumps all over the place, Band stays OK Rig in CW /RTTY/PACKET/AM/FM - dx4win mode jumps to mode in last dxspot, Freq box jumps all over the place, Band stays OK Bummer if you run a cw pile and want to log, 50% chance you get the wrong mode when entering a qso.. 73 Johan - Original Message - From: ON4AOI To: 'on4iq' Cc: dx4win@mailman.qth.net Sent: Friday, April 01, 2011 1:10 PM Subject: RE: dx4win and FT5000 First tell us what RIGFILE you use ? probably an old one for the ft2000 or ft9000, In dx4w805 is a new rigdriver for the FT5000, dated 2 januari 2011 so why stay on dx4w804 ? Guy ON4AOI Van: on4iq [mailto:on...@telenet.be] Verzonden: vrijdag 1 april 2011 12:32 Aan: dx4win@mailman.qth.net; on4...@skynet.be; supp...@dx4win.com Onderwerp: dx4win and FT5000 I recently connected the FT5000 to the PC with dx4win as logging software. Following strange behaviour has been noticed: When operating in CW (any band) the logging software reads the mode as ssb, or psk31 when the rig is in TX. I doubt that it is a RFI problem as it occurs on any band, any power level. even with only the ptt closed (that is 0 watts out) All the rs232 are shielded. The freq (khz) in the main dx4win , disappears aswell Occassionally the is 0.00 in it, giving an error when logging. Has anyone similar observations? 73 Johan __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] dx4win and FT5000
First tell us what RIGFILE you use ? probably an old one for the ft2000 or ft9000, In dx4w805 is a new rigdriver for the FT5000, dated 2 januari 2011 so why stay on dx4w804 ? Guy ON4AOI Van: on4iq [mailto:on...@telenet.be] Verzonden: vrijdag 1 april 2011 12:32 Aan: dx4win@mailman.qth.net; on4...@skynet.be; supp...@dx4win.com Onderwerp: dx4win and FT5000 I recently connected the FT5000 to the PC with dx4win as logging software. Following strange behaviour has been noticed: When operating in CW (any band) the logging software reads the mode as ssb, or psk31 when the rig is in TX. I doubt that it is a RFI problem as it occurs on any band, any power level. even with only the ptt closed (that is 0 watts out) All the rs232 are shielded. The freq (khz) in the main dx4win , disappears aswell Occassionally the is 0.00 in it, giving an error when logging. Has anyone similar observations? 73 Johan __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] dx4win and FT5000
rig file is latest made by on4aoi (as you know Guy) i doubt rig file has anything to do with the fact that soft read freq/mode of last received dxspot - Original Message - From: ON4AOI To: 'on4iq' Cc: dx4win@mailman.qth.net Sent: Friday, April 01, 2011 1:10 PM Subject: RE: dx4win and FT5000 First tell us what RIGFILE you use ? probably an old one for the ft2000 or ft9000, In dx4w805 is a new rigdriver for the FT5000, dated 2 januari 2011 so why stay on dx4w804 ? Guy ON4AOI Van: on4iq [mailto:on...@telenet.be] Verzonden: vrijdag 1 april 2011 12:32 Aan: dx4win@mailman.qth.net; on4...@skynet.be; supp...@dx4win.com Onderwerp: dx4win and FT5000 I recently connected the FT5000 to the PC with dx4win as logging software. Following strange behaviour has been noticed: When operating in CW (any band) the logging software reads the mode as ssb, or psk31 when the rig is in TX. I doubt that it is a RFI problem as it occurs on any band, any power level. even with only the ptt closed (that is 0 watts out) All the rs232 are shielded. The freq (khz) in the main dx4win , disappears aswell Occassionally the is 0.00 in it, giving an error when logging. Has anyone similar observations? 73 Johan __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] dx4win and FT5000
I'll give an extra lead, even on RX this happens. in the dxwin 8.04 and 8.05 (yes i installed 8.05 with the latest rig files) Let me explain: the mode it changes to, its dictated by the packet dxcluster spot that enters. Occasionally even the BAND in the main dx4win screen changes shortly to the spot (frequency) that arrives, most annoying feature.. RIG in SSB - dx4win mode stays OK, but freq in Freq box jumps all over the place, Band stays OK Rig in CW /RTTY/PACKET/AM/FM - dx4win mode jumps to mode in last dxspot, Freq box jumps all over the place, Band stays OK Bummer if you run a cw pile and want to log, 50% chance you get the wrong mode when entering a qso.. 73 Johan - Original Message - From: ON4AOI To: 'on4iq' Cc: dx4win@mailman.qth.net Sent: Friday, April 01, 2011 1:10 PM Subject: RE: dx4win and FT5000 First tell us what RIGFILE you use ? probably an old one for the ft2000 or ft9000, In dx4w805 is a new rigdriver for the FT5000, dated 2 januari 2011 so why stay on dx4w804 ? Guy ON4AOI Van: on4iq [mailto:on...@telenet.be] Verzonden: vrijdag 1 april 2011 12:32 Aan: dx4win@mailman.qth.net; on4...@skynet.be; supp...@dx4win.com Onderwerp: dx4win and FT5000 I recently connected the FT5000 to the PC with dx4win as logging software. Following strange behaviour has been noticed: When operating in CW (any band) the logging software reads the mode as ssb, or psk31 when the rig is in TX. I doubt that it is a RFI problem as it occurs on any band, any power level. even with only the ptt closed (that is 0 watts out) All the rs232 are shielded. The freq (khz) in the main dx4win , disappears aswell Occassionally the is 0.00 in it, giving an error when logging. Has anyone similar observations? 73 Johan __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
