Re: [Elecraft] P3 ?
I'm curious if anyone from Elecraft can provide rough price estimates? Sub 500? Sub 4 digits? Sub 1.5Kilobucks? Can you at least provide pricing to this resolution? ~Brett (KC7OTG) On Wed, 2009-08-12 at 02:50 +, Brian Alsop wrote: Bob, Given that the K3 display is 1x5, this display would be 4x as large. That doesn't seem too small to me. I'm a bit surprized by the size-- particularly the depth. I was hoping for something I could put anywhere. The depth and 6 width strikes me as somewhat excessive for my needs. Desk real estate is always limited. It seems like every piece of equipment has to be at eye level and within easy reach while sitting down. Hard to do. 73 de Brian/K3KO Bob Cunnings wrote: One thing to consider - According to the P3 announcement: It's the same height and depth as the K3, and about 6 wide... Which implies, if I'm interpreting this correctly, a max display size of less than 4 x 6. Using LP-PAN and latest PowerSDR I can have a much bigger spectrum display on my 21 monitor. The panafall display is absolutely gorgeous when maximized, and resolution is excellent. The announcement was silent on the size and resolution of the P3 display panel. The LP-PAN/PowerSDR system may offer a substantial advantage in that area. Bob NW8L On Tue, Aug 11, 2009 at 6:20 PM, telegrap...@att.net wrote: Now i guess what i have to ask is how will this affect up with the LP Pan program and adapter? I've got a brand new unit here not yet implemented so not sure if i should go ahead and get it installed or not. Larry W0OGH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.50/2296 - Release Date: 08/11/09 06:10:00 No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.50/2296 - Release Date: 08/11/09 06:10:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] QSK
...input from the Elecraft community about a new amplifier... ...Acom 1010 but I can not determine... that amplifier really has QSK. ...I love QSK... Jim: My $.02 worth - I have an Acom 1000 - absolutely full true QSK. It takes advantage of the Ft-1000mp QSK feature - the 'ready to xmit' signal is fed from the radio to the amp. The amp closes it's relays and returns an 'OK' signal to the radio. The radio then produces the neccessary RF. At the conclusion of the character, the proceedure is reversed. The amp is NEVER hot-switched. All this from the closure of the key in less than the blink of an eye, and in complete silence - a marvel to behold. It produces +/- 1000 watts out, 160 to 6m. The Acom 1010 is a lower powered version - lighter for DXpeditions, 600w out but no 6m coverage. Same GU74b tetrode. Not to say that there aren't other good amps out there. VE7XF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 and options
Putting a loudspeaker in a unit that sits at the side is in my view a retrograde step. I dare to suggest that most of us have reduced hearing in some way and a loudspeaker should best be placed in line with our ears eg a light weight speaker on a shelf at ear height. I would not stand such a unit on top of the K3, either. I like the mains power as far from the antenna as possible and some would like to keep the bench free of mains supply, everything being powered from 13.8V under the bench, we do that at the club for general use. I like the idea of a monitoring scope David G3UNA If the P3 band-scope were set up to occupy one-half of the width of a cabinet that was otherwise the same size as the K3, then perhaps a future gift from Aptos could come in the form of a transmit monitor scope (to monitor a the CW/SSB/AM modulation envelope) that would fill the other half of the enclosure.One of the best options back in the old Heathkit days was to have both the HO-10 and the H0-13 (or their SB series big brothers) sitting side by side. Looked great, and gave useful information to the operator in the form of assurances that the outgoing signal was clean.The monitor scope function could also operate during receive so a person could check the other guy's signal for flat-topping, under and over modulation, etc. Other options for the unused half of the P3 cabinet could include a speaker, a rotor-control / indicator for some of the more popular units, and, as someone already suggested, a small 20 to 30 A switcher that could provide power for the K3 and perhaps a few accessories. Lots of possibilities here. - Jim, KL7CC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] New K3 mods need new firmware
Two new modifications have been quietly released at: www.elecraft.com/K3/k3_app_notes.htm * K3 VFO Noise Mod * K3 Extreme Signal RX Protection Mod Both modifications are presently 'preliminary' and require beta firmware release 3.24, but the latest public version is still at 3.19. -- 73 from Ian GM3SEK http://www.ifwtech.co.uk/g3sek __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] New K3 mods need new firmware
In a recent message, Ian White GM3SEK gm3...@ifwtech.co.uk wrote ... * K3 VFO Noise Mod * K3 Extreme Signal RX Protection Mod Both modifications are presently 'preliminary' and require beta firmware release 3.24, but the latest public version is still at 3.19. Public release seems to be 3.16 and beta release stuck at 3.19. There was reference to 3.24 several weeks ago and Wayne has referred to the latest beta version, but I have searched for it all the folders on the ftp site to no avail. My understanding was that the beta folder was for just that, but that is not so. I think they're too busy answering queries about the P3 at the moment ;-) 73 -- David G4DMP Leeds, England, UK -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] QSK options inquiry
I recall sometime ago enquiring of Ron Stone GW3YDX at Vine (UK Acom sales) and being told that the 1010 doesn't have vacuum relays and to go with the 1000 if I was serious about QSK. I did just that and fully support what Rick says below about the 1000. Stewart Rolfe, GW0ETF Rick Tavan N6XI wrote: Dunno about the 1010 but the ACOM 1000 works beautifully with my K3 on full QSK. I think but am not sure that the 1010 is just a recent update of the 1000. At any rate, I can't imagine them regressing. The 1000 exudes quality. For a manually tuned, not-quite-full power amp with a warmup cycle, it's hard to beat. Very quiet, too. /Rick On 8/11/09, Jim Danehy jdan...@cinci.rr.com wrote: I ordered a K3 last week. I built my K2 about 8 years ago and operate it daily. I also have a Ten Tec Omni 6+ and a Hercules II amplifier. I enjoy the Ten Tec transceiver and amplifier when used in contests and chasing DX. The purpose of this email is to solicit (direct and reflector) input from the Elecraft community about a new amplifier that I can use with the K2 and K3. I also see that Array Solutions has a QSK box which might be an option. The QSK box from Array Solutions (they call it QSK Master) would be a way to integrate my Elecraft rigs with my Henry amplifier as well as the smaller Hercules II. I have thought about the Acom 1010 but I can not determine from the Internet whether that amplifier really has QSK. I have also considered the smaller 600 to 700 watt Tokyo Hy-power amps. I have not followed the saga of the Elecraft amps so maybe somebody can apprise me of where that has gone. Your advice and suggestions would be greatly appreciated. I love QSK. I realize some do not. 73, Jim W9VNE Cincinnati, Ohio __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/QSK-options-inquiry-tp3426171p3429073.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Preferences
Great news on the upcoming panadaptor. I'd definitely be interested (especially if the exchange rate moves in the right direction in the meantime!) I would vote for the inclusion of a 20A psu (as an option) but not the loudspeaker. Separate, independently positioned stereo enclosures are preferable IMHO. 73 de Alan G4LWA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] New K3 mods need new firmware
3.24 has been released to field testers only and has not yet made it to beta status. But yes you are correct that this is something that will be showing up in the beta folder. You are looking in all the right places. ~Brett (KC7OTG) On Wed, 2009-08-12 at 08:07 +0100, David Pratt wrote: In a recent message, Ian White GM3SEK gm3...@ifwtech.co.uk wrote ... * K3 VFO Noise Mod * K3 Extreme Signal RX Protection Mod Both modifications are presently 'preliminary' and require beta firmware release 3.24, but the latest public version is still at 3.19. Public release seems to be 3.16 and beta release stuck at 3.19. There was reference to 3.24 several weeks ago and Wayne has referred to the latest beta version, but I have searched for it all the folders on the ftp site to no avail. My understanding was that the beta folder was for just that, but that is not so. I think they're too busy answering queries about the P3 at the moment ;-) 73 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] QSK options inquiry
Doug Same problem here finding out anything about sales in North America. All I get is a photo of the Acom 1010 and nothing else. A few years ago they were being sold by a company in Boston then K6ND now it appears their sales in NA are in limbo. That type of instability scares me. I am sure we will get some needed feedback on my comments. That is why I am blunt with my comments. Need answers based upon facts not guess work. Jim W9VNE - Original Message - From: Doug Person d...@northroutt.net To: Rick Tavan N6XI rta...@gmail.com Cc: Jim Danehy jdan...@cinci.rr.com; Elecraft Reflector elecraft@mailman.qth.net Sent: Tuesday, August 11, 2009 11:57 PM Subject: Re: [Elecraft] QSK options inquiry Who sells the Acom 1010? Can't find any dealers with a google search. Sure looks nice. Doug -- K0DXV Rick Tavan N6XI wrote: Dunno about the 1010 but the ACOM 1000 works beautifully with my K3 on full QSK. I think but am not sure that the 1010 is just a recent update of the 1000. At any rate, I can't imagine them regressing. The 1000 exudes quality. For a manually tuned, not-quite-full power amp with a warmup cycle, it's hard to beat. Very quiet, too. /Rick On 8/11/09, Jim Danehy jdan...@cinci.rr.com wrote: I ordered a K3 last week. I built my K2 about 8 years ago and operate it daily. I also have a Ten Tec Omni 6+ and a Hercules II amplifier. I enjoy the Ten Tec transceiver and amplifier when used in contests and chasing DX. The purpose of this email is to solicit (direct and reflector) input from the Elecraft community about a new amplifier that I can use with the K2 and K3. I also see that Array Solutions has a QSK box which might be an option. The QSK box from Array Solutions (they call it QSK Master) would be a way to integrate my Elecraft rigs with my Henry amplifier as well as the smaller Hercules II. I have thought about the Acom 1010 but I can not determine from the Internet whether that amplifier really has QSK. I have also considered the smaller 600 to 700 watt Tokyo Hy-power amps. I have not followed the saga of the Elecraft amps so maybe somebody can apprise me of where that has gone. Your advice and suggestions would be greatly appreciated. I love QSK. I realize some do not. 73, Jim W9VNE Cincinnati, Ohio __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] QSK options inquiry
Doug, Here's what I've gleaned on the 1010 The 1010 is a different beastie from the 1000. It isn't just a 1000 without 6M. 1) takes more drive for full output. 2) full output at least a few hundred watts less. (I also believe the transformer is not has hefty) 3) an electronicly controlled bias circuit 4) The RF deck is different, it doesn't have the extra shielding the 1000 has. This is both a plus (if you change tubes) and a potential negative. It is a good amp for countries with an enforced 400 W power limit. Unfortunately I can't comment on the amp key circuit or QSK. 73 de Brian/K3KO Jim Danehy wrote: Doug Same problem here finding out anything about sales in North America. All I get is a photo of the Acom 1010 and nothing else. A few years ago they were being sold by a company in Boston then K6ND now it appears their sales in NA are in limbo. That type of instability scares me. I am sure we will get some needed feedback on my comments. That is why I am blunt with my comments. Need answers based upon facts not guess work. Jim W9VNE - Original Message - From: Doug Person d...@northroutt.net To: Rick Tavan N6XI rta...@gmail.com Cc: Jim Danehy jdan...@cinci.rr.com; Elecraft Reflector elecraft@mailman.qth.net Sent: Tuesday, August 11, 2009 11:57 PM Subject: Re: [Elecraft] QSK options inquiry Who sells the Acom 1010? Can't find any dealers with a google search. Sure looks nice. Doug -- K0DXV Rick Tavan N6XI wrote: Dunno about the 1010 but the ACOM 1000 works beautifully with my K3 on full QSK. I think but am not sure that the 1010 is just a recent update of the 1000. At any rate, I can't imagine them regressing. The 1000 exudes quality. For a manually tuned, not-quite-full power amp with a warmup cycle, it's hard to beat. Very quiet, too. /Rick On 8/11/09, Jim Danehy jdan...@cinci.rr.com wrote: I ordered a K3 last week. I built my K2 about 8 years ago and operate it daily. I also have a Ten Tec Omni 6+ and a Hercules II amplifier. I enjoy the Ten Tec transceiver and amplifier when used in contests and chasing DX. The purpose of this email is to solicit (direct and reflector) input from the Elecraft community about a new amplifier that I can use with the K2 and K3. I also see that Array Solutions has a QSK box which might be an option. The QSK box from Array Solutions (they call it QSK Master) would be a way to integrate my Elecraft rigs with my Henry amplifier as well as the smaller Hercules II. I have thought about the Acom 1010 but I can not determine from the Internet whether that amplifier really has QSK. I have also considered the smaller 600 to 700 watt Tokyo Hy-power amps. I have not followed the saga of the Elecraft amps so maybe somebody can apprise me of where that has gone. Your advice and suggestions would be greatly appreciated. I love QSK. I realize some do not. 73, Jim W9VNE Cincinnati, Ohio __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.52/2298 - Release Date: 08/12/09 06:09:00 No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.52/2298 - Release Date: 08/12/09 06:09:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] QSK options inquiry
ARRL has reviewed the Acom 1000, 1010 and 2000. See QST or the ARRL website. The answer to all this discussion is found in this pair of sentences from the 1010 review in December, 2006: So what does the 1010 give up in exchange for its svelte packaging and lower price? The short answer is about 300W output, full break-in CW (QSK) and 6 meter coverage. QST is your friend... 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] QSK options inquiry
Then it would be a, wait for it now. Little Shack of Horrors :p Dave Wilburn NM4M Lyle Johnson wrote: ARRL has reviewed the Acom 1000, 1010 and 2000. See QST or the ARRL website. The answer to all this discussion is found in this pair of sentences from the 1010 review in December, 2006: So what does the 1010 give up in exchange for its svelte packaging and lower price? The short answer is about 300W output, full break-in CW (QSK) and 6 meter coverage. QST is your friend... 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] SWR-Meter acurracy?
Elecrafters, please comment on this. Is there a way to calibrate the SWR-Meter? I have a K3 w/o internal Tuner. With a Dummy connected, the SWR readout never is better than 1.1 : 1. Not that this makes any difference but i have seen a readout of 1.0 : 1 on a second K3, also w/o internal tuner. With an external SWR meter connected, while matching my dipole with my homemade tuner, the K3 shows 1.1:1 long before the needle on the external swr-meter settles. In other words, the internal Meter shows good swr, the external meter shows that it is possible to set it even a little better. I ask for your input on this because i run a tube amp and Tuner. The lowest swr possible helps the tuner amp to stay cool -and the owner. The external Meter is hooked between the K3 and the amp. Martin -- 73, DM4iM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] N2CQ QRP Contest Calendar: Aug 15 - Sept 13
~ N2CQ QRP CONTEST CALENDAR August 15 to Sept. 13, 2009 ~ Worked All ARCI Challenge (CW/Dig/Ph) QRP Event! Aug 1 thru Dec 31 Info: http://www.qrparci.org/waac ~ Summer FOX Hunt - QRP 20M CW... QRP Contest! EDT: Each Tue, 9 PM to 1029 PM UTC: Each Wed, 0100z to 0229z Info: http://www.qrpfoxhunt.org/ ~ SARTG WW RTTY Contest ... Low Power Category Aug 15, z to 0800z Aug 15, 1600z to 2400z Aug 16, 0800z to 1600z Rules: http://www.sartg.com/contest/wwrules.htm ~ QRP ARCI Silent Key Memorial Contest (CW) *** QRP CONTEST! *** Aug 15, 1500z to 1800z Rules: http://www.qrparci.org ~ North American QSO Party (SSB) ... 100W Max. (/QRP noted on entry) Aug 15, 1800z to Aug 16, 0600z Rules: http://www.ncjweb.com/naqprules.php ~ NJ QSO Party (CW/SSB) Aug 15, 2000z to Aug 16, 0700z Aug 16, 1300z to Aug 17, 0200z Rules: http://www.qsl.net/w2rj/ ~ RUN FOR THE BACON (CW) *** QRP CONTEST *** EDT: Aug 16, 9 PM to 11 PM UTC: Aug 17, 0100z 0300z Rules: http://www.fpqrp.com/ ~ Russian Euro. PSK Club Contest (PSK63) Aug 22, 0300z to Aug 23, 0300z Rules: http://eu.srars.org/index.php? ~ Hawaii QSO Party (CW/SSB/Digital) ... QRP Category Aug 22, 0700z to Aug 23, 2200z Rules: http://www.karc.net/NewWebLayout/OperatingEvents/HawaiiQSOParty/hi_qso_party.html ~ Ohio QSO Party (CW/SSB) ... QRP Category Aug 22, 1600z to Aug 23, 0400z Rules: http://www.ohqp.org ~ SKCC Sprint (Straight Key CW) ... QRP Awards Aug 26, z to 0200z Rules: http://www.skccgroup.com/sprint/sks/ ~ SLOVENIA CONTEST CLUB RTTY Championship .. 100W Category Aug 29, 1200z to Aug 30, 1159z Rules: http://lea.hamradio.si/~scc/rtty/htmlrules.htm ~ Kansas QSO Party (CW/SSB/Digi) ... QRP Category Aug 29, 1400z to Aug 30, 0200z and Aug 30, 1400z to Aug 30, 2000z Rules: http://www.ksqsoparty.org/ ~ MQFD Monthly Sprint (CW/PH/Digital) *** QRP Contest *** Aug 29, 1800z to 2200z Rules: http://w2agn.net/mqfdsprint.html ~ Worked All ARCI Challenge (CW/Dig/Ph) QRP Event! thru Dec 31 Info: http://www.qrparci.org/waac ~ Summer FOX Hunt - QRP 20M CW EDT: Tue Sep 1, 9 PM to 1029 PM UTC: Wed Sep 2, 0100z to 0229z Info: http://www.qrpfoxhunt.org/ ~ Colorado QSO Party (SSB/CW/Digital) ... QRP Category Sep 05, 1200z to Sep 6, 0400z Rules: http://www.ppraa.org/coqp/ ~ IARU Region 1 Fieldday (SSB)... QRP Category Sep 05, 1300z to Sep 06, 1259z Rules: http://www.sk3bg.se/contest/iarur1fd.htm ~ AGCW Straight Key Party (CW - 40 Meters) ... QRP Category Sep 06, 1300z to 1600z Rules: http://www.agcw.org/en/?Contests:Straight_Key_Party ~ Tennessee QSO Party (SSB/CW/Dig) ... QRP Category Sep 6, 1800z to Sep 7, 0300z Rules: http://www.tnqp.org/ ~ Brazil Independence Day (PSK31) ... QRP Category Sep 7, 000z to 2350z Rules: http://www.cantareiradx.com/portal/ ~ Michigan QRP Labor Day Sprint (CW) *** QRP CONTEST! *** Sep 07, 2300z to Sep 08, 0300z Rules: http://www.qsl.net/miqrpclub/contest.html ~ Adventure Radio Spartan Sprint (CW) *** QRP EVENT *** Sep 08, 0100z to 0300z (First Monday 9 PM EDT) Info: http://adventure-radio.org/wiki/index.php?title=Spartan_Sprints ~ JAY HUDAK MEMORIAL 80M SPRINT (PSK31) ... QRP Category Sep 11, 2000 Local to 0200 Local Rules: http://www.podxs070.com/contests/80m_sprint_rules09.htm ~ Ohio State Parks On The Air (All) ... QRP Category Sep 12, 1600z to 2400z Rules: http://parks.portcars.org/ ~ Worked All Europe DX Contest (SSB) 100W Power Category Sep 12, z to Sep
Re: [Elecraft] MCU LD message
Thanks for all the replies. All is well in K3 land here! After loading the unit software and usb driver on my laptop and running the util from there, the K3 reloaded the firmware. All I had to do then was get the com port back to speed for the software I use. Forgot the K3 had an rs232 speed setting in it. daaah!! Now it's working. Thanks again to all who responded. de K2GN/Larry __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] new to a K2 hesitation on power out TX in general
I just bought a used pre-built K2 from a local friend. I bought the rig for my main QRP station in the house and also to take out where ever I decide to operate radio. I very much hope it is durable enough to travel in a bag. I'm still trying to get used to this rig. It was a huge investment toward my hobby and I am still a little nervous it isn't functioning quite right or won't meet my needs. I notice a hesitation in output power when I first key the rig after changing bands. IS THIS NORMAL DUE TO THE BAND SWITCHING RELAYS? It is a little annoying when trying to call that first station on a new band and they miss the first letter of my call and have to ask for it again. After the intitial key down it seems to work fine. I also have more output power at least on 20 and 40 meters than what the power setting is set to. last night with the output power set to 5 watts I was getting about 7.5 watts out. I plan to change out the resistor in R98 to correct this problem. I would also like to know what ideas any of you have come up with to reasonably weather proof the radio while using it outside. I only have the noise blanker and SSB board in it right now so there seems like a lot of holes in the back for dirt or a critter to crawel into and there are a lot of seams around the panels. The reflector has helped answer some questions and of course is a great resourse. Thanks! Ivin W9ILF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 ?
not until after this weekend. We're swamped gettign ready. :-) 73, Eric WA6HHQ --- Brett Howard wrote: I'm curious if anyone from Elecraft can provide rough price estimates? Sub 500? Sub 4 digits? Sub 1.5Kilobucks? Can you at least provide pricing to this resolution? ~Brett (KC7OTG) On Wed, 2009-08-12 at 02:50 +, Brian Alsop wrote: Bob, Given that the K3 display is 1x5, this display would be 4x as large. That doesn't seem too small to me. I'm a bit surprized by the size-- particularly the depth. I was hoping for something I could put anywhere. The depth and 6 width strikes me as somewhat excessive for my needs. Desk real estate is always limited. It seems like every piece of equipment has to be at eye level and within easy reach while sitting down. Hard to do. 73 de Brian/K3KO Bob Cunnings wrote: One thing to consider - According to the P3 announcement: It's the same height and depth as the K3, and about 6 wide... Which implies, if I'm interpreting this correctly, a max display size of less than 4 x 6. Using LP-PAN and latest PowerSDR I can have a much bigger spectrum display on my 21 monitor. The panafall display is absolutely gorgeous when maximized, and resolution is excellent. The announcement was silent on the size and resolution of the P3 display panel. The LP-PAN/PowerSDR system may offer a substantial advantage in that area. Bob NW8L On Tue, Aug 11, 2009 at 6:20 PM, telegrap...@att.net wrote: Now i guess what i have to ask is how will this affect up with the LP Pan program and adapter? I've got a brand new unit here not yet implemented so not sure if i should go ahead and get it installed or not. Larry W0OGH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.50/2296 - Release Date: 08/11/09 06:10:00 No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.50/2296 - Release Date: 08/11/09 06:10:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Naysayer
No power supply at this time. Its almost impossible to be cost competitive with the wide range of currently available high volume supplies. But there certainly is room in the P3 case to let you add your own PS or other items. :-) 73, Eric WA6HHQ Brett Howard wrote: I believe that Wayne agrees with you. From what I've seen the power supply in the box is something that one can have or not. I think that it'll probably come as a kit and you'll be able to select what pieces you want This Elecraft after all! ;) I'm in the same boat where all I want out of the P3 is the panadapter. I've got an Astron and a pair of speakers that keep me happy... I await (kinda) patiently for the Panadapter. ~ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 and options
No speaker in the P3 right now. We'd want it to be front mounted and that would make the P3 width too large. 73, Eric WA6HHQ David Cutter wrote: Putting a loudspeaker in a unit that sits at the side is in my view a retrograde step. I dare to suggest that most of us have reduced hearing in some way and a loudspeaker should best be placed in line with our ears eg a light weight speaker on a shelf at ear height. I would not stand such a unit on top of the K3, either. I like the mains power as far from the antenna as possible and some would like to keep the bench free of mains supply, everything being powered from 13.8V under the bench, we do that at the club for general use. I like the idea of a monitoring scope David G3UNA If the P3 band-scope were set up to occupy one-half of the width of a cabinet that was otherwise the same size as the K3, then perhaps a future gift from Aptos could come in the form of a transmit monitor scope (to monitor a the CW/SSB/AM modulation envelope) that would fill the other half of the enclosure.One of the best options back in the old Heathkit days was to have both the HO-10 and the H0-13 (or their SB series big brothers) sitting side by side. Looked great, and gave useful information to the operator in the form of assurances that the outgoing signal was clean.The monitor scope function could also operate during receive so a person could check the other guy's signal for flat-topping, under and over modulation, etc. Other options for the unused half of the P3 cabinet could include a speaker, a rotor-control / indicator for some of the more popular units, and, as someone already suggested, a small 20 to 30 A switcher that could provide power for the K3 and perhaps a few accessories. Lots of possibilities here. - Jim, KL7CC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Naysayer
This is a mixed blessing- carrying a largely empty box when traveling is a lose. I'll have to wait for photos- Santa Barbara is just a bit far and too short notice, since I'm just back from week in Montreal. There's also a forest fire in the area that would affect the riding. 73, doug Date: Wed, 12 Aug 2009 09:25:30 -0700 From: Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com No power supply at this time. Its almost impossible to be cost competitive with the wide range of currently available high volume supplies. But there certainly is room in the P3 case to let you add your own PS or other items. :-) 73, Eric WA6HHQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 ?
We see the P3 and LP-PAN as complimentary products with their own unique featuress. To be honest, I can run both at the same time on my K3 :-) LP-PAN and a high power PC certainly offers a wide range of processing and display options at the cost of a more complex PC/LP-PAN/sound Card box set up and cost. I do not see it going away as a popular option for the K3. The P3 is a powerful and compact, tightly integrated, panadapter display for the K3 that does not require a PC to be configured for its operation. This makes it ideal for both desktop and portable operation. Its plug and play with no s/w issues surrounding the K3/P3 usage with other external control programs like logging and contest programs. Its fully transparent and fast to hook up. It has the ability to do -both- spectral and waterfall displays, including a split screen mode with both. On screen cursors can be moved to desired signals and then clicked to center the K3 on that frequency. More pics and info after we get back from the Santa Barbara show next week. 73, Eric WA6HHQ --- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] New K3 mods need new firmware
I'm uploading the 3.25 beta file right now - stand by! :-) 73, Eric David Pratt wrote: In a recent message, Ian White GM3SEK gm3...@ifwtech.co.uk wrote ... * K3 VFO Noise Mod * K3 Extreme Signal RX Protection Mod Both modifications are presently 'preliminary' and require beta firmware release 3.24, but the latest public version is still at 3.19 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Naysayer
Sounds good to me to be able to add your own supply if wanted, How about the same cabinet with a blank panel for some of us who would like to add speakers, and other accessories of our own, size sounds perfect. 73 Merv KH7C No power supply at this time. Its almost impossible to be cost competitive with the wide range of currently available high volume supplies. But there certainly is room in the P3 case to let you add your own PS or other items. :-) 73, Eric WA6HHQ Brett Howard wrote: I believe that Wayne agrees with you. From what I've seen the power supply in the box is something that one can have or not. I think that it'll probably come as a kit and you'll be able to select what pieces you want This Elecraft after all! ;) I'm in the same boat where all I want out of the P3 is the panadapter. I've got an Astron and a pair of speakers that keep me happy... I await (kinda) patiently for the Panadapter. ~ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] new to a K2 hesitation on power out TX in general
Ivin Flint wrote: I notice a hesitation in output power when I first key the rig after changing bands. IS THIS NORMAL DUE TO THE BAND SWITCHING RELAYS? It is a little annoying when trying to call that first station on a new band and they miss the first letter of my call and have to ask for it again. After the intitial key down it seems to work fine. This is normal due to the closed-loop method used to set the drive. I also have more output power at least on 20 and 40 meters than what the power setting is set to. last night with the output power set to 5 watts I was getting about 7.5 watts out. I plan to change out the resistor in R98 to correct this problem. If you do not have the antenna tuner or KPA100 installed, then power measurement is done by a simple RF voltmeter which is only accurate when the load is exactly 50 ohms. For a QRP K2, the KAT2 antenna tuner is a great option -- it solves this problem, provides two antenna outputs (programmable per band) and of course is a very effective tuner. I highly recommend this. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 Problems
Hello Nick, Looking for some help please. My K2 has developed some distortion on received signals and without warning the internal speaker (and the external speaker jack) failed to work when turned on -- although headphones still work. I am about to check out the AF amp but wondered if my symptoms ring any bells with long-time K2 owners (I should add that my K2 was damaged by lightning static and these faults possibly spring from that time. Maybe the headphone jack in your K2 is (a little bit) faulty. The contacts for the headphone works sill. But the switcher inside the jack failed. This is the reason why the speacker an the external speacker jack failed too. -- 73/72 de Ingo, DK3RED - Don't forget: the fun is the power! www.qrp4fun.de - dk3...@qrp4fun.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] RES: P3 ? brochure or specs???
Hi Folks Where can I find the brochure or specs for the P3?? 73 Oms -Mensagem original- De: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] Em nome de Brian Alsop Enviada em: terça-feira, 11 de agosto de 2009 23:50 Para: Elecraft@mailman.qth.net Assunto: Re: [Elecraft] P3 ? Bob, Given that the K3 display is 1x5, this display would be 4x as large. That doesn't seem too small to me. I'm a bit surprized by the size-- particularly the depth. I was hoping for something I could put anywhere. The depth and 6 width strikes me as somewhat excessive for my needs. Desk real estate is always limited. It seems like every piece of equipment has to be at eye level and within easy reach while sitting down. Hard to do. 73 de Brian/K3KO Bob Cunnings wrote: One thing to consider - According to the P3 announcement: It's the same height and depth as the K3, and about 6 wide... Which implies, if I'm interpreting this correctly, a max display size of less than 4 x 6. Using LP-PAN and latest PowerSDR I can have a much bigger spectrum display on my 21 monitor. The panafall display is absolutely gorgeous when maximized, and resolution is excellent. The announcement was silent on the size and resolution of the P3 display panel. The LP-PAN/PowerSDR system may offer a substantial advantage in that area. Bob NW8L On Tue, Aug 11, 2009 at 6:20 PM, telegrap...@att.net wrote: Now i guess what i have to ask is how will this affect up with the LP Pan program and adapter? I've got a brand new unit here not yet implemented so not sure if i should go ahead and get it installed or not. Larry W0OGH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.50/2296 - Release Date: 08/11/09 06:10:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 Problems
The failure mode that Ingo describes is not that unusual in a K2. If you cannot get speaker audio, the phone jack should be one of the first things to check. 73, Steve Kercel AA4AK Ingo Meyer, DK3RED wrote: Hello Nick, Looking for some help please. My K2 has developed some distortion on received signals and without warning the internal speaker (and the external speaker jack) failed to work when turned on -- although headphones still work. I am about to check out the AF amp but wondered if my symptoms ring any bells with long-time K2 owners (I should add that my K2 was damaged by lightning static and these faults possibly spring from that time. Maybe the headphone jack in your K2 is (a little bit) faulty. The contacts for the headphone works sill. But the switcher inside the jack failed. This is the reason why the speacker an the external speacker jack failed too. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 or LP-Pan ?
P3 or LP-Pan ? Having considered both options, I have decided to hold off purchasing either. It is not so much the cost, shipping or VAT that puts me off, more the visual confirmation of the amount of EMI spectrum pollution such as PLT that our government allows to continue in the UK. Stewart G3RXQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 or LP-Pan ?
It is not so much the cost, shipping or VAT that puts me off, more the visual confirmation of the amount of EMI spectrum pollution such as PLT that our government allows to continue in the UK. Stewart: Whatever option you decide upon, you will find the panadapter to be a great device for localizing and killing various forms of EMI interference. For me it's become almost an obsession to find a blip on the screen then start throwing circuit breakers in an attempt to find the noise source. Since the time of owning the SDR-IQ unit, I have replaced power supplies on my daughter's Sony Playstation, two wireless routers, an UPS for my home office, several USB-to-Serial adapters and the noise floor is now reasonably clean. So beware, if you're concerned about EMI spectrum pollution, the addition of a pan adapter is so useful that it may keep you busy for a while -- although the exercise to/from the breaker panel will be good for you. Paul, W9AC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] New K3 Utility versoin 1.2.8.10 (for Windows) available on Elecraft web site
K3 Utility version 1.2.8.10 (for Windows only, the Mac and Linux ports are in progress and will follow shortly) is available on Elecraft's K3 software web page http://www.elecraft.com/K3/k3_software.htm. K3 Utility changes since 1.2.3.18 include: - Support for the RF Gain calibration procedure (see Configuration page, RF Gain calibration button). The RF Gain calibration procedure requires MCU firmware 3.25 and later (beta firmware). - A function to set the K3's date and time to the value of the personal computer's clock (TU W4SMT, W6FVI). This is also on the Configuration tab page, Set K3 Date and Time button. - DSP firmware load now includes a fresh load of the associated DTBL table file. - Installer now permits the K3 Utility to be installed on Windows 98 as well as later versions. - Enable configuration save on MCU revisions earlier than 2.48. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 ?
Dear Larry, Big question: QUADRATURE OUTPUTS?? It seems to me that if Elecraft does provide quadrature outputs from the P3, then, besides being a stand alone panadapter, the P3 might also effectively replace the LP_PAN unit . You could just plug those quadrature outputs into your sound card and then use PowerSDR-IF stage and LP_Bridge on your computer just as if you had an LP_PAN. Why do that? If you just want a panadapter, then there is no reason to. But if you want to use other features of PowerSDR like an alternate set of DSP implementations, maybe better audio, maybe more resolution on the screen, etc., then you can use those quadrature outputs with your computer and Power SDR to get that. You'll effectively have a FlexRadio receiver on your desktop (K3 front end, PowerSDR back end) along with your K3 and its panadapter. One benefit of the P3 is likely to be important only to people who have problems with RF in the shack. The LP_PAN setup can be a rat's nest of cables and adapters. It is very vulnerable to RF, and hard to get clean. The P3, however, is all in one metal box, and is presumably tested by Elecraft to play well with the K3 when connected. This could be an important benefit. Of course, you might lose that benefit if you then connect things to the quadrature outputs. :-) Hope this is some food for thought. 73, Oliver Johns W6ODJ On 11 Aug 2009, at 5:20 PM, telegrap...@att.net wrote: Now i guess what i have to ask is how will this affect up with the LP Pan program and adapter? I've got a brand new unit here not yet implemented so not sure if i should go ahead and get it installed or not. Larry W0OGH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] PC Noise
G'day, Continuing my investigation into PC noise I tried for the first time using the CAT interface of my microHAM CW Keyer. Basically this provides a USB to RS232 conversion CAT interface and a WinKey. For more info on the other twiddly bits see the microHAM web site. K3 on 6 metres, PR6 on, PRE OFF and the antenna port terminated with 50 ohm load. No noise. Quieter than the CAT6 based RS232 cable I use because with the cable I can just hear PC noise as I task switch and the CRT monitor updates. Previous measurements showed the directly connected KUSB to be approximately +10dB noisier than the RS232 cable. No connection with microHAM other than buying a CW Keyer a couple of years ago. Regards, Mike VP8NO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 FIRMWARE, Rev. 3.25: Improved NR, 10-Hz SHIFT steps, Received CW WPM display, VFO noise reduction, etc.
K3 beta-test firmware revision 3.25 (with DSP rev. 2.21) is now available. There are several new features and significant improvements in this revision; see release notes below. Please send problem reports to k3supp...@elecraft.com. Beta firmware load instructions can be found at http://www.elecraft.com/K3/k3_software.htm 73, Wayne N6KR * * * MCU 3.25 / DSP 2.21, 8-11-2009 New Features: * NOISE REDUCTION (NR) IMPROVEMENTS: Our new NR algorithm has less impact on signal strength, and should no longer make some weak signals “disappear” due to over-processing. We may fine-tune the algorithm in future releases, based on operator evaluation, but we’ve have good reports from early testers. * VFO TUNING NOISE REDUCTION: Some operators have reported hearing noise on 60, 10, or 6 meters when tuning the VFO under very quiet conditions. If you experience this, try the following: In the CONFIG:VCO MD menu entry, tap ‘1’ until you see “SPI 2” (the default is “SPI 1”). This alters the timing of data sent to the synthesizer, which in turn changes the spectrum of SPI-bus signal noise. It has no impact on performance. You will also need to add two resistors and two diodes to the bottom of the RF board (see application note on our K3 modifications web page). * AUTOMATIC RECEIVER FRONT END PROTECTION: If the K3 is operated too close to high-power transmitters, it’s possible to damage some receiver components. While this rarely happens, we’ve taken steps to prevent it by sensing a high-current condition at the mixer post-amplifier (Q8/Q9) and automatically turning off the preamp and, if necessary, turning on the attenuator. You will need to add one jumper wire on the bottom of the RF board (see application note on our K3 modifications web page). If you don’t add the jumper, operation will be unchanged; firmware can sense whether or not you’ve installed the jumper. * 10-HZ PASSBAND SHIFT STEPS (EXPERIMENTAL): If CONFIG:PB CTRL is set to SHIFT=.01 for a given operating mode, the SHIFT control will provide .01 kHz (10 Hz) steps rather than the original .05 kHz (50 Hz). Especially useful with narrow filter bandwidths. This feature is experimental and has some limitations at present: Applies to CW and DATA only; LOCUT/HICUT cannot be used when 10-Hz SHIFT steps are in effect; WIDTH steps remain 50 Hz in all cases. Not compatible with spur removal function yet (CONFIG: SIG RMV); signals mapped out may reappear. * CW SPEED DISPLAYED WITH DECODED CW TEXT: If the TEXT DEC switch parameter is set to WPM CHK (using VFO B), the speed of on-air CW signals will be shown, along with a small window of CW text. You might see “18w. CQ…”, where “18w.” means 18 WPM. Both text decode and WPM display accuracy can be improved by using narrow filtering and by careful adjustment of the “THR” (threshold) parameter (set with VFO A when the TEXT DEC switch is pressed). * RF GAIN CALIBRATION: The K3’s hardware AGC circuitry can now be calibrated. This may improve both S-meter and RF GAIN control accuracy. To do RF GAIN calibration, use revision 1.2.7.24 or later of K3 Utility (use the RF GAIN calibration function, under Configuration). This procedure calibrates both main and sub receivers. A signal source is required. Future firmware revisions will further improve accuracy, using the calibration data stored by this procedure. Misc. Improvements: * SK IS NO LONGER DISPLAYED IN RESPONSE TO NOISE DURING CW DECODE. Incorrect characters are now displayed as ‘*’. * 6 METER SCANNING NO LONGER PROHIBITED. Scanning is limited to the 6-m U.S. ham band (50-54). Exception: In some countries the K3 won’t operate on 6 m at all. * TTY CENTER FREQ NOW DISPLAYED CORRECTLY: In FSK-D and AFSK-A modes, rotating SHIFT now shows the exact center pitch (when indicated by an asterisk). The four available center pitches are 1000, 1360, 1530, and 2210 Hz. Previously the pitch was rounded down to the nearest 50 Hz. For Software Developers: * RO COMMAND (RIT/XIT OFFSET READ/SET) ADDED. This command provides a more direct way to set up the RIT/XIT offset, as an alternative to “RU” and “RD”. Set/Response format: ROs; where s is +/-, and is -. --- http://www.elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA100 speaker
n0jrn wrote: When installing the KPA100 in an EC2 enclosure, should I install the speaker ??? The speaker of a KPA100 in an EC2 enclosure can be used for other rigs if you make a simple modification, see instructions here: http://www.qslnet.de/member/la3za/KPA100_loudspeaker.html K2: Using the KPA100 loudspeaker when the KPA100 is remoted Sverre LA3ZA - Sverre, LA3ZA http://www.qslnet.de/member/la3za/K2/mod.html LA3ZA Unofficial Guide to K2 modifications -- View this message in context: http://n2.nabble.com/KPA100--speaker-tp3420510p3433556.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] qsk options inquiry
I have the Acom 1000 and use it with the K3/100 (#250)...full QSK, no problems at all with keying,(up to 44wpm) etc. I got it in 2004. I have made over 15000 Qs with many of these Qs during contest operations, phone, cw and rtty. I do crank it back to 500w out when running rtty so as to run a little cooler. If you like computer controlled amps, this is a remarkable little amp, very quiet and puts out about 600w or so. It is NOT a 1000w amp...the specs on the tube the 4CX800 say plate dissipation is 800w...plug in typical efficiency and that will put it down around 600wto 680wMy LP-100 shows 800w peak and my Bird shows around 600-650w (key dwn) output into Steppir 3 ele yagi. Not sure that anyone could tell the difference over the air if power was 1000w or 600w. Not sure about the marketing of the amp now...did Array Solutions or DX Eng pick up the line in the US? A recent email to K6ND (US rep) garnered a response from a technician in LZ land. All in all, I like the amp and would recommend one to someone in the US or EU. 73 Tom CX7TT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 ?
Nice post, Oliver. All of what you say is exactly why I've been anxiously waiting for the P3, and why I won't even consider buying one if it doesn't have buffered I/Q outputs. Aside from existing software like PowerSDR and CW Skimmer, think of all the other future possibilities for third party SDR-type applications ... automated band monitoring, intelligent band scanning, contest activity statistics, propagation studies (for example, transmit two signals 5 KHz apart, one with vertical polarization and one with horizontal polarization, and let the SDR software on the other end track both simultaneously), etc. There is simply too much potential from having access to quadrature data to go without. I find it almost unimaginable that Elecraft would introduce the P3 without that capability since (at least from my perspective) it would be easy and inexpensive to do it, but sadly that appears to be the situation thus far. 73, Dave AB7E --Original Mail-- From: O. Johns ojo...@metacosmos.org To: telegrap...@att.net, Elecraft@mailman.qth.net Sent: Wed, 12 Aug 2009 12:26:53 -0700 Subject: Re: [Elecraft] P3 ? Dear Larry, Big question: QUADRATURE OUTPUTS?? It seems to me that if Elecraft does provide quadrature outputs from the P3, then, besides being a stand alone panadapter, the P3 might also effectively replace the LP_PAN unit . You could just plug those quadrature outputs into your sound card and then use PowerSDR-IF stage and LP_Bridge on your computer just as if you had an LP_PAN. Why do that? If you just want a panadapter, then there is no reason to. But if you want to use other features of PowerSDR like an alternate set of DSP implementations, maybe better audio, maybe more resolution on the screen, etc., then you can use those quadrature outputs with your computer and Power SDR to get that. You'll effectively have a FlexRadio receiver on your desktop (K3 front end, PowerSDR back end) along with your K3 and its panadapter. One benefit of the P3 is likely to be important only to people who have problems with RF in the shack. The LP_PAN setup can be a rat's nest of cables and adapters. It is very vulnerable to RF, and hard to get clean. The P3, however, is all in one metal box, and is presumably tested by Elecraft to play well with the K3 when connected. This could be an important benefit. Of course, you might lose that benefit if you then connect things to the quadrature outputs. :-) Hope this is some food for thought. 73, Oliver Johns W6ODJ On 11 Aug 2009, at 5:20 PM, telegrap...@att.net wrote: Now i guess what i have to ask is how will this affect up with the LP Pan program and adapter? I've got a brand new unit here not yet implemented so not sure if i should go ahead and get it installed or not. Larry W0OGH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] New K3 Utility versoin 1.2.8.10 (for Windows) available on Elecraft web site
What is required of a signal generator to do the RF gain calibration? On Wed, Aug 12, 2009 at 11:30 AM, Dick Dievendorffdie...@comcast.net wrote: K3 Utility version 1.2.8.10 (for Windows only, the Mac and Linux ports are in progress and will follow shortly) is available on Elecraft's K3 software web page http://www.elecraft.com/K3/k3_software.htm. K3 Utility changes since 1.2.3.18 include: - Support for the RF Gain calibration procedure (see Configuration page, RF Gain calibration button). The RF Gain calibration procedure requires MCU firmware 3.25 and later (beta firmware). - A function to set the K3's date and time to the value of the personal computer's clock (TU W4SMT, W6FVI). This is also on the Configuration tab page, Set K3 Date and Time button. - DSP firmware load now includes a fresh load of the associated DTBL table file. - Installer now permits the K3 Utility to be installed on Windows 98 as well as later versions. - Enable configuration save on MCU revisions earlier than 2.48. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] qsk options inquiry
On Wed, 2009-08-12 at 16:50 -0300, cx...@4email.net wrote: I have the Acom 1000 ...snip... this is a remarkable little amp, very quiet and puts out about 600w or so. It is NOT a 1000w amp...the specs on the tube the 4CX800 say plate dissipation is 800w...plug in typical efficiency and that will put it down around 600wto 680wMy LP-100 shows 800w peak and my Bird shows around 600-650w (key dwn) output into Steppir 3 ele yagi. I have run my Acom1000 at a measured 1kw out on 6m for JT6M, this is a high duty mode (100% keydown, 1 minute on 1 minute off) which is, I am sure pretty hard on tube life but no issues so far where the tube is concerned. I have had this amp since late 2001 so it's an early model. The ACOM 1k runs hot but well within it's rated temp ratings @1Kw high duty cycle. Keep the dust filter at the back well cleaned and ensure that the exhaust vent is free. I measured a little over 1100 watts into a Dummy load on most bands. My measurement is based on a Dummy load and an LP-100 calibrated against a Rohde Schwarz power sensor borrowed from work the power meter on the acom 1k can be a little optimistic, reading around 1300W for 1050W into the dummy load ;-) if you are only getting ~ 600W out of your Acom 1k you may want to check that the transformer taps are set correctly for your line voltage and that your shack supply is not 'sagging' too much on keydown 73 Brendan EI6IZ -- 73 Brendan EI6IZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Off Topic - 2009 Kyrgyzstan 50 MHz DXpedition from Grid Locator MN82re starts SUNDAY!!
Just a final reminder to any K3 owner with a 6m yagi and an amplifier - some REAL MAGIC is just about to begin ;-) The EX7MW/EX8MLT 6m DXpedition starts with their moonrise on Sunday! That corresponds to moonset in the USA and is around the middle of the day. They should be able to complete a JT65A mode contact with anyone having good ground gain and a 5 element yagi and 500w. CNDX for 6m EME next week look excellent, and they steadily improve as the week progresses. Mike and Oleg have specially selected a quiet location with excellent ground gain over the large lake Issyk-Kul. They will be elevating their antenna when the moon is higher than 20 degrees, so they can continue to operate during your moonrise or moonset. Don't miss out on this great opportunity to contact a rare DXCC on 6m! The K3 makes it simple to operate digital modes! If you still have not tried JT65A mode yet, there are tips on how to use it for EME on my website: http://www.bigskyspaces.com/w7gj/JT65.txt Remember that they will always transmit in the first sequence, so you always leave the TX FIRST box on your JT65A screen UNchecked. Watch for more updates and info at: http://6meme.ex7mw.com/ http://www.mmmonvhf.de/latest.php If you copy them please call them!! Just remember to spread out with 200Hz between callers! Good luck and DX to all on the Magic Band! VY 73, Lance -- Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX) P.O. Box 73 Frenchtown, MT 59834 USA QTH: DN27UB TEL: (406) 626-5728 URL: http://www.bigskyspaces.com/w7gj 2m DXCC #11/6m DXCC #815 Interested in 6m EME? Ask me about subscribing to the MAGIC BAND EME email reflector! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Filter Querry
Someone on the reflector sent me a private message regarding my filter post. In my ususl clumsy fashion I managed to delete it so if you are dtill interesred, please repost. 73, Doug W6JD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 sudden power loss
Welcome to the club. My K3 has done that twice. It is currently in Aptos for repair of this problem...again. Philip Gary Hinson wrote: Hi all. Yesterday afternoon my K3 #2887 was merrily transmitting 33% at 5W on 17m for WSPRnet as normal when by chance I noticed the external wattmeter was showing no power out on transmit - none at all, not a squeak. The internal wattmeter is also showing no power out, aside from the first bar permanently lit in TX. The receivers still seem to be working fine. The rig was working OK up to then and has been since mid-April. I wasn't fiddling with any of the settings at the point it packed up, but before anyone asks here are the ten checks I've done so far: 1. I tried sending CW and SSB - neither works. Nor does TUNE, at any power setting. Nor does any other band. 2. I tried using VOX on both semi and full break-in, and PTT - no joy there either. The TX LED lights as expected but no watts escape. 3. I've plugged a 100W dummy load directly into the ANT2 socket, selected ANT2 and tried transmitting, just in case there's some cable or antenna problem. Nope, that's not it. 4. The K3 is not in TEST mode (the TX light is on continous not flashing). I cycled TEST mode on and back off to be real sure. 5. I checked CONFIG: TX INH is off, and again cycled it through the other settings to be sure to be sure. Nope, not that. 6. I tried running the TX gain configuration through K3 Utility: the front panel shows ERR TXG and the K3 Utility reports: Unexpected response DS@@°À; to DS; State 153 Calibration power settled at 0.0 W .; There be gremlins. 7. According to the internal metering, the K3's voltage is reading a steady 13.5V and the current sits at about 1.28A on RX, increasing to about 1.62A when I hit the PTT. No change from that level when I key the paddle or speak into the mike, whether whispering, shouting or swearing. I even tried coaxing it to life, complementing it on the colour of its LCD ... 8. The power setting makes no difference: I've tried from 0 to 100W. I hear the PA relay engage around 12W as normal, and the internal power meter changes between high and low settings as expected. It's just taunting me. 9. The 20A circuit breaker on the PA is in - not that I'd have thought it would prevent the QRP level working at least. 10. I've reloaded *all* the firmware: I was using the latest beta 3.25. Reloaded that, no change. Reloaded an older version 2.78, still no change. What should I try next? I guess I need to pop the lid, look for smoke emitters and poke around at the TX driver and PA stages plus the antenna change over relay and ATU area with a multimeter but haven’t figured out exactly where to poke yet, nor what I should expect to see on the meter when I do ... I have other radios here and a scope. I guess I could try to trace the TX signal with the K3 set to QRP, fishing around with a wire tail on another radio's antenna socket or the scope input ... Maybe ... What do you think? 73 Gary :-( ZL2iFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 utility and calibrate RF gain
Hi, I have just installed this and run the Calibrate RF gain and I am impressed with the improvement. My S-meter was accurate at S3 and S9 but grossly exaggerated beyond S9+10. After calibration it remains accurate at S3 and S9 (needed no further S meter calibration) and now is much better at high signal levels. Unfortunately my modified XG1 (normal XG1 + 40dB) had been left on and run down the battery so I have only been able to test the higher levels by comparing K3 and LP-Pan/PowerSDR readings on strong 40m AM stations, but they are quite close. This also much improves the S-meter when backing off on the RF gain. Very useful improvent and the first one in months that prompted me to upgrade. AB2TC - Knut Dave G4AON wrote: I've just tried this with the new utility (and f/w 3.25). After running the gain calibration and then calibrating SMTR OF and SMTR SC, the K3 S-meter did give remarkably accurate readings. - AB2TC - Knut -- View this message in context: http://n2.nabble.com/K3-utility-and-calibrate-RF-gain-tp3434334p3434500.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 utility and calibrate RF gain
See the firmware release notes. RF Gain calibration can prove S meter accuracy, Dick Sent from my iPhone On Aug 12, 2009, at 3:19 PM, Dave G4AON elecr...@astromag.co.uk wrote: I've just tried this with the new utility (and f/w 3.25). After running the gain calibration and then calibrating SMTR OF and SMTR SC, the K3 S-meter did give remarkably accurate readings. My K3 gives S9 = -73 dBm, S9+20 = -53 dBm, S9+40=-33 dBm and S9+60=-13 dBm. Equally it is giving 6 dB per S point below S9 down to S3 at -109 dBm. I only checked my K3 on 80m but it's darn good. Mine is calibrated without the pre-amp in use and on CW. It needs clarifying that the gain calibration does not in itself calibrate the S-meter. 73 Dave, G4AON K3/100 #80 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] New K3 Utility versoin 1.2.8.10 (for Windows) available on Elecraft web site
The signal generator should have the ability to send an S9 signal ( -73 dBm) on a frequency the K3 receives. I think that's about it. Dick Sent from my iPhone On Aug 12, 2009, at 1:17 PM, Brett Howard br...@livecomputers.com wrote: What is required of a signal generator to do the RF gain calibration? On Wed, Aug 12, 2009 at 11:30 AM, Dick Dievendorffdie...@comcast.net wrote: K3 Utility version 1.2.8.10 (for Windows only, the Mac and Linux ports are in progress and will follow shortly) is available on Elecraft's K3 software web page http://www.elecraft.com/K3/k3_software.htm. K3 Utility changes since 1.2.3.18 include: - Support for the RF Gain calibration procedure (see Configuration page, RF Gain calibration button). The RF Gain calibration procedure requires MCU firmware 3.25 and later (beta firmware). - A function to set the K3's date and time to the value of the personal computer's clock (TU W4SMT, W6FVI). This is also on the Configuration tab page, Set K3 Date and Time button. - DSP firmware load now includes a fresh load of the associated DTBL table file. - Installer now permits the K3 Utility to be installed on Windows 98 as well as later versions. - Enable configuration save on MCU revisions earlier than 2.48. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] Nice NR improvement with Beta 3.25
I just downloaded the new utility and Beta 3.25. The DSP NR is much better in terms of not reducing the volume as much. I have never been a fan of NR because it always (on all rigs that have it not just the K3) sounded to me that the volume was reduced so much that by the time I turned the AF gain up enough to produce the same level the noise was just as bad to my lousy ears. Thanks guys! 73 Bill nz0t -- View this message in context: http://n2.nabble.com/Nice-NR-improvement-with-Beta-3.25-tp3434522p3434522.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] k3 - SWR-Meter acurracy?
Hi Martin, This topic passed through the group a couple of weeks ago. Don has some very good comments on it. I can make a few *un-official** comments based on my own limited experience. I am a K2 owner rather than a K3 owner, however, I have a hunch the SWR circuits are close approximations. The K2's SWR circuit has the typical line passing through the center of a toroid with a couple of trim-caps and diode FWD/REF rectification. What is tapped off this are FWD REF voltages. The typical SWR circuit in an external tuner is almost identical, except that the FWD REF energy is tapped off as a current which is then series_R limited (trim-pot) for driving an analog meter. The (trim-pot), in all probability was tweaked to adjust the analog meter reading with 100 watts applied. Long story short... I use an outdoors mounted auto-tuner, and I wanted to watch it adjust SWR when I switch frequencies. So I built myself a tiny analog SWR meter using one of the MFJ meters and a modified rectifier circuit. I wanted to test its readings up the scale to 100 watts. Don reminded me of the voltage reading that can be taken on a dummy load (non-reactive resistance) with an HF probe and a scope. IF you have a scope, give it a try. Just tap across the dummy. Set the probe to 10X so there is no circuit loading. wattage = (mV reading * mV reading)/400 This assumes an R of 50 ohms. HAVE FUN!! :) Duane N1BBR -- bw...@fastmail.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] W2 Watt Meter
How soon will we be able to download the W2 manual so we can see the back of the unit and read about how it will work. Tom, N5GE n...@n5ge.com K3 #806, K3 #1055, PR6, XV144, XV432, KRC2, W1 and other small kits. http://www.n5ge.com http://www.swotrc.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Shift 0.1
Crafters, I have just installed 3.25 beta. Maybe I am blind to an obvious setting etc., but when I change from shift 0.1 to 0.5, my 2.7 filter bandwidth sure sounds better. At the shift setting 0.1, the radio audio sounds puffy noisy at the same settings at the 2.7 bandwidth. Have to stick to the 0.5 setting for now. Maybe I will discover the difference, but so far I don't find it. The radio sounds terrible in the wider bandwidth filter with the shift setting at 0.1. Just my observation. Maybe erroneous. Also when changing the shift settings, the radio goes to a narrower filter automatically as the change takes place. I guess that is how it is supposed to be. Shortly put, the different shift settings in the menu make my radio sound different in the 2.7 filter range. 73, Mike K5NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Shift 0.1
Yea it seems that there is a lot more low frequency response when set to .01 rather than .05. I get a lot of low frequency rumble out of the speakers when in .01. I'll see if I can get some frequency response captures of it... On Wed, 2009-08-12 at 20:12 -0500, k5nu wrote: Crafters, I have just installed 3.25 beta. Maybe I am blind to an obvious setting etc., but when I change from shift 0.1 to 0.5, my 2.7 filter bandwidth sure sounds better. At the shift setting 0.1, the radio audio sounds puffy noisy at the same settings at the 2.7 bandwidth. Have to stick to the 0.5 setting for now. Maybe I will discover the difference, but so far I don't find it. The radio sounds terrible in the wider bandwidth filter with the shift setting at 0.1. Just my observation. Maybe erroneous. Also when changing the shift settings, the radio goes to a narrower filter automatically as the change takes place. I guess that is how it is supposed to be. Shortly put, the different shift settings in the menu make my radio sound different in the 2.7 filter range. 73, Mike K5NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] Nice NR improvement with Beta 3.25
Agreed. After about 6 minutes of exhaustive testing (hi!) I can hear a noticeable difference. I still get some volume drop when NR is switched in, but when I increase AF Gain to compensate the noise level remains low. Well done! Paul WW2PT NZ0T wrote: I just downloaded the new utility and Beta 3.25. The DSP NR is much better in terms of not reducing the volume as much. I have never been a fan of NR because it always (on all rigs that have it not just the K3) sounded to me that the volume was reduced so much that by the time I turned the AF gain up enough to produce the same level the noise was just as bad to my lousy ears. -- View this message in context: http://n2.nabble.com/Nice-NR-improvement-with-Beta-3.25-tp3434522p3434996.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Shift 0.1
Took a trace of what I was hearing... http://www.livecomputers.com/K3/shift.01.jpg red trace is 2.7Khz BW with shift=.05 green trace is 2.7Khz BW with shift=.01 On Wed, 2009-08-12 at 18:30 -0700, Brett Howard wrote: Yea it seems that there is a lot more low frequency response when set to .01 rather than .05. I get a lot of low frequency rumble out of the speakers when in .01. I'll see if I can get some frequency response captures of it... On Wed, 2009-08-12 at 20:12 -0500, k5nu wrote: Crafters, I have just installed 3.25 beta. Maybe I am blind to an obvious setting etc., but when I change from shift 0.1 to 0.5, my 2.7 filter bandwidth sure sounds better. At the shift setting 0.1, the radio audio sounds puffy noisy at the same settings at the 2.7 bandwidth. Have to stick to the 0.5 setting for now. Maybe I will discover the difference, but so far I don't find it. The radio sounds terrible in the wider bandwidth filter with the shift setting at 0.1. Just my observation. Maybe erroneous. Also when changing the shift settings, the radio goes to a narrower filter automatically as the change takes place. I guess that is how it is supposed to be. Shortly put, the different shift settings in the menu make my radio sound different in the 2.7 filter range. 73, Mike K5NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Shift 0.1
k5nu wrote: Crafters, I have just installed 3.25 beta. Maybe I am blind to an obvious setting etc., but when I change from shift 0.1 to 0.5, my 2.7 filter bandwidth sure sounds better. At the shift setting 0.1, the radio audio sounds puffy noisy at the same settings at the 2.7 bandwidth. Have to stick to the 0.5 setting for now. Wayne is aware of this and is looking at it. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Shift 0.1
Please disregard the other random junk this is a sound card that is built into the mother board. On Wed, 2009-08-12 at 18:51 -0700, Brett Howard wrote: Took a trace of what I was hearing... http://www.livecomputers.com/K3/shift.01.jpg red trace is 2.7Khz BW with shift=.05 green trace is 2.7Khz BW with shift=.01 On Wed, 2009-08-12 at 18:30 -0700, Brett Howard wrote: Yea it seems that there is a lot more low frequency response when set to .01 rather than .05. I get a lot of low frequency rumble out of the speakers when in .01. I'll see if I can get some frequency response captures of it... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Shift 0.1
Same here.definitely not what I would have expected.back to .5 for me.73, Charlie, K4ZRJ k5nu wrote: Crafters, I have just installed 3.25 beta. Maybe I am blind to an obvious setting etc., but when I change from shift 0.1 to 0.5, my 2.7 filter bandwidth sure sounds better. At the shift setting 0.1, the radio audio sounds puffy noisy at the same settings at the 2.7 bandwidth. Have to stick to the 0.5 setting for now. Maybe I will discover the difference, but so far I don't find it. The radio sounds terrible in the wider bandwidth filter with the shift setting at 0.1. Just my observation. Maybe erroneous. Also when changing the shift settings, the radio goes to a narrower filter automatically as the change takes place. I guess that is how it is supposed to be. Shortly put, the different shift settings in the menu make my radio sound different in the 2.7 filter range. 73, Mike K5NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 FIRMWARE, Rev. 3.25: Improved NR, 10-Hz SHIFT steps, Received CW WPM display, VFO noise reduction, etc.
This is a welcome update for all K3 owners. I just wanted to thank everyone at Elecraft for listening to your customers and implementing these needed features and fixes. A special thanks to Lyle for being patient, and listening to all of our suggestions and criticisms. Also a big thank you to Wayne for remembering our VFO noise plight; I doubt you would remember our conversation over the phone several months ago, but I'm glad you did not forget this issue. 73 de James K2QI On Wed, Aug 12, 2009 at 3:49 PM, wayne burdick n...@elecraft.com wrote: K3 beta-test firmware revision 3.25 (with DSP rev. 2.21) is now available. There are several new features and significant improvements in this revision; see release notes below. Please send problem reports to k3supp...@elecraft.com. Beta firmware load instructions can be found at http://www.elecraft.com/K3/k3_software.htm 73, Wayne N6KR * * * MCU 3.25 / DSP 2.21, 8-11-2009 New Features: * NOISE REDUCTION (NR) IMPROVEMENTS: Our new NR algorithm has less impact on signal strength, and should no longer make some weak signals “disappear” due to over-processing. We may fine-tune the algorithm in future releases, based on operator evaluation, but we’ve have good reports from early testers. * VFO TUNING NOISE REDUCTION: Some operators have reported hearing noise on 60, 10, or 6 meters when tuning the VFO under very quiet conditions. If you experience this, try the following: In the CONFIG:VCO MD menu entry, tap ‘1’ until you see “SPI 2” (the default is “SPI 1”). This alters the timing of data sent to the synthesizer, which in turn changes the spectrum of SPI-bus signal noise. It has no impact on performance. You will also need to add two resistors and two diodes to the bottom of the RF board (see application note on our K3 modifications web page). * AUTOMATIC RECEIVER FRONT END PROTECTION: If the K3 is operated too close to high-power transmitters, it’s possible to damage some receiver components. While this rarely happens, we’ve taken steps to prevent it by sensing a high-current condition at the mixer post-amplifier (Q8/Q9) and automatically turning off the preamp and, if necessary, turning on the attenuator. You will need to add one jumper wire on the bottom of the RF board (see application note on our K3 modifications web page). If you don’t add the jumper, operation will be unchanged; firmware can sense whether or not you’ve installed the jumper. * 10-HZ PASSBAND SHIFT STEPS (EXPERIMENTAL): If CONFIG:PB CTRL is set to SHIFT=.01 for a given operating mode, the SHIFT control will provide .01 kHz (10 Hz) steps rather than the original .05 kHz (50 Hz). Especially useful with narrow filter bandwidths. This feature is experimental and has some limitations at present: Applies to CW and DATA only; LOCUT/HICUT cannot be used when 10-Hz SHIFT steps are in effect; WIDTH steps remain 50 Hz in all cases. Not compatible with spur removal function yet (CONFIG: SIG RMV); signals mapped out may reappear. * CW SPEED DISPLAYED WITH DECODED CW TEXT: If the TEXT DEC switch parameter is set to WPM CHK (using VFO B), the speed of on-air CW signals will be shown, along with a small window of CW text. You might see “18w. CQ…”, where “18w.” means 18 WPM. Both text decode and WPM display accuracy can be improved by using narrow filtering and by careful adjustment of the “THR” (threshold) parameter (set with VFO A when the TEXT DEC switch is pressed). * RF GAIN CALIBRATION: The K3’s hardware AGC circuitry can now be calibrated. This may improve both S-meter and RF GAIN control accuracy. To do RF GAIN calibration, use revision 1.2.7.24 or later of K3 Utility (use the RF GAIN calibration function, under Configuration). This procedure calibrates both main and sub receivers. A signal source is required. Future firmware revisions will further improve accuracy, using the calibration data stored by this procedure. Misc. Improvements: * SK IS NO LONGER DISPLAYED IN RESPONSE TO NOISE DURING CW DECODE. Incorrect characters are now displayed as ‘*’. * 6 METER SCANNING NO LONGER PROHIBITED. Scanning is limited to the 6-m U.S. ham band (50-54). Exception: In some countries the K3 won’t operate on 6 m at all. * TTY CENTER FREQ NOW DISPLAYED CORRECTLY: In FSK-D and AFSK-A modes, rotating SHIFT now shows the exact center pitch (when indicated by an asterisk). The four available center pitches are 1000, 1360, 1530, and 2210 Hz. Previously the pitch was rounded down to the nearest 50 Hz. For Software Developers: * RO COMMAND (RIT/XIT OFFSET READ/SET) ADDED. This command provides a more direct way to set up the RIT/XIT offset, as an alternative to “RU” and “RD”. Set/Response format: ROs; where s is +/-, and is -. --- http://www.elecraft.com __ Elecraft mailing list Home:
[Elecraft] New K3 software 3.25 Noise Reduction works
I found the new Elecraft Untiltiy and K3 software 3.25 on the Elecraft website tonight. I live in Fargo ND and have lots of line noise and this new software is by far the best I have ever tried. I am looking forward to more CW contacts from home instead of having to go camping to hear most of the stations on the bands. Thanks Lyle. I think you have a winner this time. 73 Ken W0CZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Question
So I have another wonder about the P3. Being that this thing sounds like its going to have a nice display on it and a bigger display it makes me wonder if the K3 can send data to it... The reason I ask it that it may be a really cool way to augment the PSK/RTTY/CW decode functionality. Eric says that it can do spectrum and waterfall split screen. What about spectrum display and 2 or 3 lines of decoded text some day perhaps? Just food for thought. Depending on how fully integrated it is, there is a lot that the larger display being connected to the K3 could provide beyond that of just a panadapter and could make it more attractive to people who wish they had a bigger panel. ~Brett (KC7OTG) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] V. 3.25 Firmware - Noise Reduction
I was pleasantly surprised to see the improvement in noise reduction in v.3.25 firmware. The sharp artifacts are gone. The noise reduction seems to work better in SSB and CW. Even at the F4-4 setting, noise reduction artifacts are gone making it usable. Thank you Lyle for this greatly improved NR. Roy Morris W4WFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 troubles.
Hi gang, Lots of neat stuff going across here so let me add to the problem diagnosis list. I have a K3 SN 763 that is giving me fits. Multiple fits if you will. First of all i only get audio out of the stereo line out jacks when the active receiver is shown under the SUB menu. Or i susppse VFO B. I get nothing to the stereo line out jack when i'm using the A rail or VFO. Now i can get stereo audio out of the Stereo headphone jack if i gently push the jack in and wiggle it around. sounds like a bad jack to me. But i digress, at least that tells me that the headphones are good. I've not pulled any covers off YET!. Second problem. I like 6 meters and the radio performs rather well up there. Best thing that's happened to me in years, radio wise. Anyway, If i use 6 meters on the A vfo everything is peachy keen. If i shift it to the B then i hear a spur of some sort every 6 kc throughout the band. Really gets annoying. Now if i put the 6 meter antenna on the rear Rec In Ant the spurs go way donw in level but are still there. The radio is equipped with 2 receivers and a variety of filters. Doesn't seem to be anything that i can do to get rid of those spurs except to operate 6 meters on the A VFO all the time but then i don't have any audio coming out of the Line out jack to make my WSJT, ARGO, DM780 work. It only come out of the B vfo side which is where the 6 kc spurs come from. Otherwise the radio is really a great piece of engineering and i love it. Good looking as well with a bit of a steep learning curve for us guys getting up in years. Any suggestions other than operate 6 meters on the A vfo only? Btw, i to had the scratchy VFO noise when tuning around on 10 mtrs but i've not made the mod yet. I hate to keep pulling covers off of radios every other day to fix yet another problem. Not that this will happen but since i've got several of them, might as well wait and see if i can get a good fix for more than one at a time. Thanks in advance for your ear. Larry W0OGH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 FIRMWARE, Rev. 3.25: Improved NR, 10-Hz SHIFT steps, Received CW WPM display, VFO noise reduction, etc.
Good but any hope for 1 dB S-meter resolution? / SM2EKM wayne burdick wrote: * RF GAIN CALIBRATION: The K3’s hardware AGC circuitry can now be calibrated. This may improve both S-meter and RF GAIN control accuracy. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] V. 3.25 Firmware - Noise Reduction
On Wed, 12 Aug 2009 23:16:35 -0400, Roy Morris w4...@carolina.rr.com wrote: I was pleasantly surprised to see the improvement in noise reduction in v.3.25 firmware. The sharp artifacts are gone. The noise reduction seems to work better in SSB and CW. Even at the F4-4 setting, noise reduction artifacts are gone making it usable. Thank you Lyle for this greatly improved NR. Roy Morris W4WFB [snip] I second that. Tom, N5GE n...@n5ge.com K3 #806, K3 #1055, PR6, XV144, XV432, KRC2, W1 and other small kits. http://www.n5ge.com http://www.swotrc.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Fw: V. 3.25 Firmware - Noise Reduction
Yes, the new software is a real improvement. Lyle, please make this mod availiable to the KDSP2, which is miles away from K3 DSP. Michael, DC0ZO - Original Message - From: Roy Morris w4...@carolina.rr.com To: elecraft@mailman.qth.net Sent: Thursday, August 13, 2009 5:16 AM Subject: [Elecraft] V. 3.25 Firmware - Noise Reduction I was pleasantly surprised to see the improvement in noise reduction in v.3.25 firmware. The sharp artifacts are gone. The noise reduction seems to work better in SSB and CW. Even at the F4-4 setting, noise reduction artifacts are gone making it usable. Thank you Lyle for this greatly improved NR. Roy Morris W4WFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html