Re: [Elecraft] VFO B / Decode

[Cady, Fred]

Hi Zac,

You can use the K3  Utility program and its Terminal window to show the decoded 
characters when you have decode turned on.  You can operate CW, RTTY (FSK D) 
and PSK (PSK D).  You can define 16 memories for each of the modes by clicking 
Edit Memories.

Cheers and 73,

Fred KE7X


For info on all KE7X Elecraft books, see www.ke7x.com.



From: elecraft-boun...@mailman.qth.net  on 
behalf of zachary petersen 
Sent: Tuesday, December 5, 2017 11:57 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] VFO B / Decode

I have been looking through the options, and the manual however I can't
seem to find an option to force VFO B to stay on decode instead of
switching back to the frequency. I have been using 0 PWR and the decode to
practice CW however since VFO B switches back it makes it difficult to see
what I have typed unless I am actively looking at it.

Additionally I thought it might be interesting to allow for VFO B knob
while on "decode" mode to allow you to scroll back in a conversation ( to a
certain buffer limit ).

Thank you and I hope to hear if there are any solutions to keep the VFO B
on decode, or if this could be a feature that could be added.

--
--Zac
858-888-6090
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fc...@montana.edu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] VFO B / Decode

[zachary petersen]

I have been looking through the options, and the manual however I can't
seem to find an option to force VFO B to stay on decode instead of
switching back to the frequency. I have been using 0 PWR and the decode to
practice CW however since VFO B switches back it makes it difficult to see
what I have typed unless I am actively looking at it.

Additionally I thought it might be interesting to allow for VFO B knob
while on "decode" mode to allow you to scroll back in a conversation ( to a
certain buffer limit ).

Thank you and I hope to hear if there are any solutions to keep the VFO B
on decode, or if this could be a feature that could be added.

-- 
--Zac
858-888-6090
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [K3] S-meter linearity

[Al Lorona]

I ran through an RF Gain calibration with the K3 Utility-- as I seem to do 
every three or four years for no good reason-- and then I checked the linearity 
of the S-meter. I've calibrated my S-meter for 1 S-unit = 5 dB because that way 
each tic mark represents 5 dB both above and below S9, making it easy to 
interpret. I use an Agilent E4433B signal generator.


I can go from +60 dB over S9 (-13 dBm) down to S2 (-108 dBm) by stepping the 
amplitude of the generator in exactly 5 dB steps and over this entire 95 dB 
range the segments of the S-meter track perfectly.


(The last S-unit, from S2 to S1, takes about an 8 dB delta to register on the 
S-meter.)


I gotta say, that's pretty remarkable. Not too many years ago S-meters were 
approximate guesses, but they've improved quite a bit, probably because of 
digital IFs and lookup tables. Very nice.

Al  W6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and WSJT-X Split operation.

[donovanf]

Hi Jim, 


I agree, something isn't right with my K3 Line-in. Fortunately 
the microphone input works perfectly with my Tascam US100 
external sound card. Thanks for your recommending that 
superb device. 


According the the K3 manual, K3 Line-in is designed for 1 volt p-p 
and has 10K input impedance. Someday I'll try a different K3... 


tks 


73 
Frank 
W3LPL 

- Original Message -

From: "Jim Brown"  
To: elecraft@mailman.qth.net 
Sent: Wednesday, December 6, 2017 4:04:54 AM 
Subject: Re: [Elecraft] K3 and WSJT-X Split operation. 

Hi Frank, 

Something seems not right. The output stage of many (most?) computer 
sound cards is usually also used to drive headphones, and typically 
provide at least a volt, which is approximately line level for consumer 
devices, and output Z is usually fairly low (<500 ohms). In the audio 
world, inputs are, by convention, high impedance (>10K). Did the radio 
designer screw up and stick a low value resistor across the line input? 

My general advice is to run the computer sound card about 6 dB below 
clip, because it is common for distortion to rise by 10 dB with that 6 
dB difference in output level. How much drive does that rear panel Line 
In need? 

73, Jim K9YC 

On 12/5/2017 5:50 PM, donov...@starpower.net wrote: 
> I have the same problem with inadequate audio from my sound card 
> when I use the rear panel Line In connector. But it works great if 
> I use the front panel microphone connector. 


__ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to donov...@starpower.net 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Hot Mic when VOX selected

[Don Wilhelm]

Chris,

Think about that for a moment -- If you have to activate PTT in order to 
have VOX, you might as well turn VOX off and operate strictly with PTT.
The "hot mic" is necessary for VOX operation, and one does not have to 
touch the PTT to initiate transmit.


Yes, VOX is not good in a situation where there are random noises in the 
shack, but for those in a quiet shack setting it works quite well - just 
talk and you will transmit.


There are VOX noise gate adjustments that work in association with VOX 
and do work to provide some protection for room noises.


This comment is reminiscent of the years ago SSB contacts where 
operators would make an AHHH sound during pauses just to keep the VOX 
open and not drop out of transmit.


VOX has improved over the years, but is not perfect due to 
considerations beyond the control of the electrons.  I prefer to use PTT 
and not VOX, but VOX can be useful in a quiet shack, especially when 
using a headset with a close talking microphone.


73,
Don W3FPR

On 12/5/2017 11:35 PM, Chris Hallinan wrote:

Greetings,

I wired my spare Yaesu MD-100 desk mic to my K3 - getting good audio
reports.  A very nice desk mic.

However, the way this mic is wired, PTT does not break the mic circuit, so
it's always hot, regardless of position of PTT switch.  My old Shure 444
routed the mic circuit through a pair of contacts on the PTT switch, which
was convenient.  A switch on the bottom opened PTT to enable VOX.

Setting the VOX gain to a suitable level leaves the mic quite sensitive to
false transmits from random desk noises, etc.

Is there a firmware setting or equivalent that will disable K3 VOX when the
PTT circuit is open, and enable VOX when PTT is closed?  That would be
quite useful.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Hot Mic when VOX selected

[Chris Hallinan]

Greetings,

I wired my spare Yaesu MD-100 desk mic to my K3 - getting good audio
reports.  A very nice desk mic.

However, the way this mic is wired, PTT does not break the mic circuit, so
it's always hot, regardless of position of PTT switch.  My old Shure 444
routed the mic circuit through a pair of contacts on the PTT switch, which
was convenient.  A switch on the bottom opened PTT to enable VOX.

Setting the VOX gain to a suitable level leaves the mic quite sensitive to
false transmits from random desk noises, etc.

Is there a firmware setting or equivalent that will disable K3 VOX when the
PTT circuit is open, and enable VOX when PTT is closed?  That would be
quite useful.

73 and best regards,

Chris - K1AY
Punta Gorda, FL

-- 
Life is like Linux - it never stands still.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and WSJT-X Split operation.

[Jim Brown]

Hi Frank,

Something seems not right. The output stage of many (most?) computer 
sound cards is usually also used to drive headphones, and typically 
provide at least a volt, which is approximately line level for consumer 
devices, and output Z is usually fairly low (<500 ohms).  In the audio 
world, inputs are, by convention, high impedance (>10K). Did the radio 
designer screw up and stick a low value resistor across the line input?


My general advice is to run the computer sound card about 6 dB below 
clip, because it is common for distortion to rise by 10 dB with that 6 
dB difference in output level. How much drive does that rear panel Line 
In need?


73, Jim K9YC

On 12/5/2017 5:50 PM, donov...@starpower.net wrote:

I have the same problem with inadequate audio from my sound card
when I use the rear panel Line In connector. But it works great if
I use the front panel microphone connector.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and WSJT-X Split operation.

[donovanf]

Hi Steve, 


I have the same problem with inadequate audio from my sound card 
when I use the rear panel Line In connector. But it works great if 
I use the front panel microphone connector. 


73 
Frank 
W3LPL 

- Original Message -

From: "Steve Lund"  
Cc: elecraft@mailman.qth.net 
Sent: Tuesday, December 5, 2017 11:06:14 PM 
Subject: Re: [Elecraft] K3 and WSJT-X Split operation. 

I have to run my K3 (S/N 1260) in split mode for WSJT-X. 

It works fine for tone frequencies above 1500 Hz, but for low (<1000 Hz) 
tones I can't get the ALC above a few bars with all controls (windows, 
wsjt-x, K3) to their maximum settings. 

Split 'solved' the problem, so I haven't investigated what is causing the 
low frequency roll off. 

Steve, K6UM 

On Tue, Dec 5, 2017 at 6:11 PM, Christopher Hoover  
wrote: 

> I second Carl's explanation. 
> 
> I run WSJT-X on my K3s in rig split mode exclusively. It works 
> transparently and flawlessly. 
> 
> 
> On Mon, Dec 4, 2017 at 5:02 PM, Carl Clawson  wrote: 
> 
> > Hi Dany. This scared me a little bit too until I figured out what it was 
> > for. 
> > 
> > This is not just for expeditions. It's for everyone to use whose rig can 
> > handle it. 
> > 
> > Your TX frequency will still be as indicated on the FT8 screen. The 
> > software will raise the audio tone frequency by the same amount that it 
> > drops your VFO B so that your tone is in the right place. By doing this, 
> > the audio tone frequency is kept high enough that its harmonics will be 
> out 
> > of your FT8 passband. This is good -- it helps keep the band clean. 
> > 
> > See section 4.2 in the wsjt-x user guide. 
> > 
> > 73, Carl WS7L 
> > 
> > 
> > On Mon, Dec 4, 2017 at 3:59 PM, Dany VE2EBK  wrote: 
> > 
> > > Hi 
> > > 
> > > I would like to know if someone tried to run WSJT-X FT-8 in Split 
> mode, 
> > > not Split in the audio band but in real Split by activating the option 
> in 
> > > the radio tab of the configuration? 
> > > 
> > > Here, when I activate Split option, K3 change for Split, RX stay on VFO 
> > A, 
> > > TX change to VFO B but TX frequency drop of 1 kHZ ! If I turn the VFO 
> B 
> > > (TX) 3 kHz up for example, the VFO B return 1 KHz down when a 
> > transmission 
> > > start (TUNE is enough). 
> > > 
> > > This option seems to have been for the DX station rather than for use. 
> > > 
> > > It would be nice to check this before the 3Y0Z DXpedition that during 
> > ... 
> > > 
> > > 73 
> > > 
> > > Dany VE2EBK 
> > > 
> > > __ 
> > > Elecraft mailing list 
> > > Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> > > Help: http://mailman.qth.net/mmfaq.htm 
> > > Post: mailto:Elecraft@mailman.qth.net 
> > > 
> > > This list hosted by: http://www.qsl.net 
> > > Please help support this email list: http://www.qsl.net/donate.html 
> > > Message delivered to clawso...@gmail.com 
> > > 
> > __ 
> > Elecraft mailing list 
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> > Help: http://mailman.qth.net/mmfaq.htm 
> > Post: mailto:Elecraft@mailman.qth.net 
> > 
> > This list hosted by: http://www.qsl.net 
> > Please help support this email list: http://www.qsl.net/donate.html 
> > Message delivered to c...@murgatroid.com 
> > 
> __ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:Elecraft@mailman.qth.net 
> 
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 
> Message delivered to k6um.el...@gmail.com 
> 
__ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to donov...@starpower.net 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Tuneup, Rescue, Build your K2, K1, KX1, others

[Alan D . Wilcox]

Hello,

Have you always wanted an Elecraft? A KX1, K1, K2,  whatever? 
I’ll build any of them.

Does your K2 need repair? Tuneup?

In addition to tuning your rig, I can also rescue a building project you might 
have started some time ago.

See what my clients have said about my construction and service work at 
http://www.eham.net/reviews/detail/6768 

Photos of the popular "Twins" -- the KPA100 and KAT100 in EC2 enclosure --  are 
at
http://wilcoxengineering.com/kpa100-in-ec2/ 

Cheers,
Alan

Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-478-0736 (cell, text)
http://amazon.com/author/alandwilcox
Williamsport, PA 17701

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and WSJT-X Split operation.

[Steve Lund]

I have to run my K3 (S/N 1260) in split mode for WSJT-X.

It works fine for tone frequencies above 1500 Hz, but for low (<1000 Hz)
tones I can't get the ALC above a few bars with all controls (windows,
wsjt-x, K3) to their maximum settings.

Split 'solved' the problem, so I haven't investigated what is causing the
low frequency roll off.

Steve, K6UM

On Tue, Dec 5, 2017 at 6:11 PM, Christopher Hoover 
wrote:

> I second Carl's explanation.
>
> I run WSJT-X on my K3s in rig split mode exclusively.   It works
> transparently and flawlessly.
>
>
> On Mon, Dec 4, 2017 at 5:02 PM, Carl Clawson  wrote:
>
> > Hi Dany. This scared me a little bit too until I figured out what it was
> > for.
> >
> > This is not just for expeditions. It's for everyone to use whose rig can
> > handle it.
> >
> > Your TX frequency will still be as indicated on the FT8 screen. The
> > software will raise the audio tone frequency by the same amount that it
> > drops your VFO B so that your tone is in the right place. By doing this,
> > the audio tone frequency is kept high enough that its harmonics will be
> out
> > of your FT8 passband. This is good -- it helps keep the band clean.
> >
> > See section 4.2 in the wsjt-x user guide.
> >
> > 73, Carl WS7L
> >
> >
> > On Mon, Dec 4, 2017 at 3:59 PM, Dany VE2EBK  wrote:
> >
> > > Hi
> > >
> > > I would like to know if someone tried to run WSJT-X FT-8  in Split
> mode,
> > > not Split in the audio band but in real Split by activating the option
> in
> > > the radio tab of the configuration?
> > >
> > > Here, when I activate Split option, K3 change for Split, RX stay on VFO
> > A,
> > > TX change to VFO B but TX frequency drop of 1 kHZ !  If I turn the VFO
> B
> > > (TX) 3 kHz up for example, the VFO B return 1 KHz down when a
> > transmission
> > > start (TUNE is enough).
> > >
> > > This option seems to have been for the DX station rather than for use.
> > >
> > > It would be nice to check this before the 3Y0Z DXpedition  that during
> > ...
> > >
> > > 73
> > >
> > > Dany VE2EBK
> > >
> > > __
> > > Elecraft mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Elecraft@mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> > > Message delivered to clawso...@gmail.com
> > >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to c...@murgatroid.com
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k6um.el...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K6XX CW Indicator for K2, K1 & KX1

[Ron Polityka]

Hello,

 Just wanted to let the K2, K1 & KX1 users know that I have some K6XX CW
Indicator kits in stock. Sales have dropped off to 2 or 3 kits a year. When
my supplies run out I will stop selling the kits.

 Please check wb3aal at com for information.

 FYI - This is a SMD kit, not a thru hole device.

73
Ron
WB3AAL

On Dec 3, 2017 12:02 AM, "kevinr"  wrote:

Good Evening,

   Another parcel of cloud pushes its way through a gap in the nearby
mountains. It slides, tumbles its way down to a low area. Gradually this
space fills with low layer of mist. As it fills the fog becomes more dense.
I start seeing waves as an aliquot of cloud hits the ‘lake’ forming in the
valley. The gap is about two miles away; the wave caused by the tumbling
cloud meeting the surface takes about three minutes to get to my location.
It is still clear and sunny up here but that is changing. A misty layer is
forming around me. When the wave from the last dollop of cold cloud hits my
side of the valley the ‘breakers’ get to near my feet. Six minutes per sine
wave works out to ~0.0028 Hz.  There and back again.

The sun is currently blank though the solar wind is still causing
aurora. We just missed a CME and are due for another chance on Monday. So
we will use the ions given us and see how far that takes us.


Please join us tomorrow on:

   14050 kHz at 2300z Sunday (3 PM PST Sunday)
7045 kHz at 0100z Monday (5 PM PST Sunday)

73,
Kevin. KD5ONS

_
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wb3...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and WSJT-X Split operation.

[Christopher Hoover]

I second Carl's explanation.

I run WSJT-X on my K3s in rig split mode exclusively.   It works
transparently and flawlessly.


On Mon, Dec 4, 2017 at 5:02 PM, Carl Clawson  wrote:

> Hi Dany. This scared me a little bit too until I figured out what it was
> for.
>
> This is not just for expeditions. It's for everyone to use whose rig can
> handle it.
>
> Your TX frequency will still be as indicated on the FT8 screen. The
> software will raise the audio tone frequency by the same amount that it
> drops your VFO B so that your tone is in the right place. By doing this,
> the audio tone frequency is kept high enough that its harmonics will be out
> of your FT8 passband. This is good -- it helps keep the band clean.
>
> See section 4.2 in the wsjt-x user guide.
>
> 73, Carl WS7L
>
>
> On Mon, Dec 4, 2017 at 3:59 PM, Dany VE2EBK  wrote:
>
> > Hi
> >
> > I would like to know if someone tried to run WSJT-X FT-8  in Split mode,
> > not Split in the audio band but in real Split by activating the option in
> > the radio tab of the configuration?
> >
> > Here, when I activate Split option, K3 change for Split, RX stay on VFO
> A,
> > TX change to VFO B but TX frequency drop of 1 kHZ !  If I turn the VFO B
> > (TX) 3 kHz up for example, the VFO B return 1 KHz down when a
> transmission
> > start (TUNE is enough).
> >
> > This option seems to have been for the DX station rather than for use.
> >
> > It would be nice to check this before the 3Y0Z DXpedition  that during
> ...
> >
> > 73
> >
> > Dany VE2EBK
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to clawso...@gmail.com
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c...@murgatroid.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com