[Elecraft] K3S glitching on startup

2019-06-24 Thread Frank O'Donnell
This evening I used my new K3S for a normal session of FT8 (K3S 
connected to computer via a single USB cable for both CAT control and 
audio transfer), then powered it down.


When I powered it up later, the following occurred:

-- It did not display the normal startup message

-- It rapidly switched from DATA to CW mode, remaining there

-- Started beeping a number of times per second, continuing indefinitely

-- Showed "VOX -- OFF" on the display.

Wondering if this could have been caused by unintended pressure on the 
CW paddle, I unplugged it but this made no difference. The K3S continues 
to go into this state each time I power it down and restart it. I'm 
unable to change mode, band, etc.


Any suggestions for resolving this? Thanks in advance.

73,

Frank K6FOD

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] KX3 batteries

2019-06-24 Thread Mark Goldberg
I've brought the 3 Ah ones on aircraft multiple times and had no issues. I
brought a copy of the UN safety certification that I got from the battery
company but have never been asked for it.

The batteries did save me from having my bag checked once though. I put my
bag in the overhead. Someone else came by and moved my bag trying to get
theirs in the overhead and the overhead would not close. The flight
attendant, not knowing what happened wanted to check my bag. I stated it
had lithium batteries in it and she checked the bag belonging to the person
that moved my bag. I didn't have to argue at all. Karma!

LiFePO4 batteries are also safer than other Lithiums, but they seem to be
treated the same by the airlines and shipping companies.

73,

Mark
W7MLG

On Mon, Jun 24, 2019 at 7:23 PM Eric - Gmail 
wrote:

> The FAA rules on taking batteries on airplanes can be found in the
> document "Batteries Carried by Airline Passengers: Frequently Asked
> Questions" at
>
> www.faa.gov/about/office_org/headquarters_offices/ash/ash_programs/hazmat/passenger_info/media/Airline_passengers_and_batteries.pdf
>
> will allow you to take a battery as large as 160Wh. The larger Bioenno's
> (9AH and up) are over 100 Wh
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] KX3 batteries

2019-06-24 Thread Eric - Gmail
The FAA rules on taking batteries on airplanes can be found in the 
document "Batteries Carried by Airline Passengers: Frequently Asked 
Questions" at 
www.faa.gov/about/office_org/headquarters_offices/ash/ash_programs/hazmat/passenger_info/media/Airline_passengers_and_batteries.pdf


"Lithium ion batteries (a.k.a.: rechargeable lithium, lithium polymer, 
LIPO, secondary lithium). Passengers may carry all
consumer-sized lithium ion batteries (up to 100 watt hours per battery). 
This size covers AA, AAA, cell phone, PDA, camera,
camcorder, handheld game, tablet, portable drill, and standard laptop 
computer batteries. The watt hours (Wh) rating is marked
on newer lithium ion batteries and is explained in #3 below. External 
chargers are also considered to be a battery.
With airline approval, devices can contain larger lithium ion batteries 
(101-160 watt hours per battery), but spares of this size are
limited to two batteries in carry-on baggage only. This size covers the 
largest aftermarket extended-life laptop batteries and
most lithium ion batteries for professional-grade audio/visual 
equipment."


Last month, I took a KX3 to Sint Maarten (PJ7). My battery was a Bioenno 
6AH, equivalent to 72 watt hours. It worked like a charm!


You need to check with your airline, as some -- but not all -- airlines 
will allow you to take a battery as large as 160Wh. The larger Bioenno's 
(9AH and up) are over 100 Wh


Bioenno has listings on their website of recommended batteries for most 
commonly available rigs, based on your duty cycle.


73,
Eric W3DQ

--
 Jim Brown wrote:

Yes. This ham-friendly company sells a wide range of LiFePO4 batteries.
 Charge before you leave home (all Li batteries require a charger
 designed for their specific chemistry, voltage, and capacity), connect
 to your KX2/3 external power jack. Choose the capacity/weight that 
suits

 your planned use.

 $50 will get you 3Ah that weighs 13 oz; add $15 for the charger. A 6Ah
 battery goes for $80, approximately twice the weight. I paid about $195
 for a 20Ah battery that weighs 5.4#, +$20 for a faster charger.

 https://www.bioennopower.com/collections/12v-series-lifepo4-batteries

 73, Jim K9YC


J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] More than you ever wanted to know about solar cycles

2019-06-24 Thread kevinr
I found this paper and thought some of you would be interested. Warning: 
things look grim from 2019 to 2055 since we'll be in a grand solar 
minimum.  Looks like the next three 11 year cycles will not be too 
good.  Better prepare space for your 160 m antennas.



 Oscillations of the baseline of solar magnetic field and solar
 irradiance on a millennial timescale

https://www.nature.com/articles/s41598-019-45584-3

It does get a bit dry but the math is minimal.

   GL,

  Kevin.  KD5ONS

-

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX3 batteries

2019-06-24 Thread Walter Underwood
Right, Eneloop Pro get 500 cycles instead of 2000 for regular Eneloop. But I’m 
OK with 500 charge cycles and getting 2550 mAh instead of 2000 mAh.

The Wikipedia page for Eneloop is fairly informative.

https://en.wikipedia.org/wiki/Eneloop

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Jun 24, 2019, at 5:15 PM, Dave Sublette  wrote:
> 
> IIRC, the Eneloop Pro has fewer recharge cycles than do the regular
> Eneloops.
> 
> K4TO
> 
> On Mon, Jun 24, 2019 at 7:57 PM John Harper  wrote:
> 
>> Panasonic Eneloop Pro
>> 
>>> Best KX3 batteries
>> 
>>> My old rechargeable batteries are failing.   Recommdation for
>> replacements?
>> 
>> 
>> John AE5X
>> https://ae5x.blogspot.com
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k...@arrl.net
>> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Low Power Output on 160 and 6 meters

2019-06-24 Thread Mark Musick
From the K3S manual dated 2016:

TRANSMITTER *
Output Power K3S/100: 0.1 W –100 W typ. Suggested max from 51-52 MHz, 85 W; 
52-54, 70 W.
K3S/10 (or K3S/100 with PA bypassed): 0.1 W –12 W, HF-10 m; 8 W max on 6 m.
XVTR OUT: HF, -10 to +1.8 dBm; at 472 kHz (630 m), -3 dBm (see pg. 41).
K144XV: ~10 W, 144-148 MHz.
Note: K3S/100 output can be set up to 110 W. However, IMD and spurious products
are specified at 100 W, the recommended maximum (lower on 6 m; see above).

I'd say 90 Watts on 6 meters meets the specification.

My K3S puts out 100 Watts on 160 and 93 Watts on 6 (50.125) into a Palstar 
dummy load.

Mark, WB9CIF

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of John
Sent: Tuesday, June 25, 2019 00:11
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Low Power Output on 160 and 6 meters

Everett, I saw a similar thing when I sent my K3 in for updating.

It came back with an indicated power out of 90 watts max, while

it went in to the shop showing 106 watts max.  It was explained 

me that since it met all specs, 90 watts was good.

I don't like it but that's what I was left with.

73.

John.


On 24/06/2019 3:51 p.m., EVERETT SHARP via Elecraft wrote:
> I have three K3S and over the week-end I connected each of them to my Bird 
> watt meter, with a Dummy load. Each of K3S were updated to the current 
> Firmware and each had the 5 and 50 watt calibrations run.
>
> What I found was all 3 showed from 80 to 90 watts output on 160 meters 
> and on 6  meters I saw 75 to 90 watts. All other bands showed 
> typically
> 105 to 110 watts. However, one of the K3S showed exactly 100 watts on all 
> bands except for the lower power on 160 and 6 meters.
>
> I did check one of the K3S before doing the current Firmware update and saw 
> no difference before and after the up date on 160 and 6 meter power output.
>
> Does anyone have any idea as to why I am seeing the lower outputs on 160 and 
> 6 meters.
>
> Everett N4CY
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> ve7...@telus.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to markmus...@outlook.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX3 batteries

2019-06-24 Thread Dave Sublette
IIRC, the Eneloop Pro has fewer recharge cycles than do the regular
Eneloops.

K4TO

On Mon, Jun 24, 2019 at 7:57 PM John Harper  wrote:

> Panasonic Eneloop Pro
>
> >Best KX3 batteries
>
> >My old rechargeable batteries are failing.   Recommdation for
> replacements?
>
>
> John AE5X
> https://ae5x.blogspot.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k...@arrl.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Low Power Output on 160 and 6 meters

2019-06-24 Thread John

Everett, I saw a similar thing when I sent my K3 in for updating.

It came back with an indicated power out of 90 watts max, while

it went in to the shop showing 106 watts max.  It was explained to

me that since it met all specs, 90 watts was good.

I don't like it but that's what I was left with.

73.

John.


On 24/06/2019 3:51 p.m., EVERETT SHARP via Elecraft wrote:

I have three K3S and over the week-end I connected each of them to my Bird watt 
meter, with a Dummy load. Each of K3S were updated to the current Firmware and 
each had the 5 and 50 watt calibrations run.

What I found was all 3 showed from 80 to 90 watts output on 160 meters and on 6 
 meters I saw 75 to 90 watts. All other bands showed typically
105 to 110 watts. However, one of the K3S showed exactly 100 watts on all bands 
except for the lower power on 160 and 6 meters.

I did check one of the K3S before doing the current Firmware update and saw no 
difference before and after the up date on 160 and 6 meter power output.

Does anyone have any idea as to why I am seeing the lower outputs on 160 and 6 
meters.

Everett N4CY

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ve7...@telus.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] (no subject)

2019-06-24 Thread rich hurd WC3T
Internal NiMH?Eneloop Pro.

On Mon, Jun 24, 2019 at 19:27 Ron Bell via Elecraft <
elecraft@mailman.qth.net> wrote:

> Best KX3 batteries?
>
> My old rechargeable batteries are failing.   Recommdation for replacements?
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to r...@wc3t.us
>
-- 
72,
Rich Hurd / WC3T / DMR: 3142737
Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid:
*FN20is*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] (no subject)

2019-06-24 Thread Walter Underwood
Most people use the Eneloop Pro batteries for the internal set. They have good 
capacity, low self-discharge, and are unlikely to leak.

$33 for an eight-pack at Amazon.

https://smile.amazon.com/gp/product/B00MXCIK32/ 


wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Jun 24, 2019, at 4:27 PM, Ron Bell via Elecraft  
> wrote:
> 
> Best KX3 batteries?
> 
> My old rechargeable batteries are failing.   Recommdation for replacements?
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] KX3 batteries

2019-06-24 Thread John Harper
Panasonic Eneloop Pro

>Best KX3 batteries

>My old rechargeable batteries are failing.   Recommdation for replacements?


John AE5X
https://ae5x.blogspot.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] (no subject)

2019-06-24 Thread Ron Bell via Elecraft
Best KX3 batteries?

My old rechargeable batteries are failing.   Recommdation for replacements?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] AX-1 Tripod Adapter

2019-06-24 Thread Peter Wollan
I just got one, and it happens to fit my camera tripod. The tripod attaches
to a camera using a smaller plastic piece that screws onto the camera (or
the antenna) and snaps onto the platform. There’s just enough clearance for
the BNC connector.

You might try something like a flash holder to get enough clearance.

I used it Sunday morning FD with my QRP K2.  It was quieter than the wire
in a tree, but pretty much everyone who could hear me with one could also
hear me with the other. Really nice!


  Peter W0LLN


OMon, Jun 24, 2019 at 12:32 AM Wayne Burdick  wrote:

> Phil,
>
> I'll send you a dimensioned drawing.
>
> 73,
> Wayne
> N6KR
>
>
> > On Jun 23, 2019, at 6:42 PM, Phil Hystad via Elecraft <
> elecraft@mailman.qth.net> wrote:
> >
> > I just ordered the AX-1 antenna Tripod Adapter but I am wondering if it
> fits the camera tripod that we have.   I need about two inches of clearance
> (i.e. radius from center of attachment screw) to clear the platform
> designed for the camera.  I am not sure that the AX-1 tripod adapter has
> that amount of distance between the BNC connector and the mounting screw.
> >
> > Has anyone used this tripod adapter on a camera mount tripod?Or, do
> I need to buy another tripod and if so, any suggestions?
> >
> > 73, phil, K7PEH
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to peter.wol...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Field Day report

2019-06-24 Thread WW3S
We were on cw then...l

Sent from my iPad

> On Jun 24, 2019, at 6:14 PM, rocke...@gmail.com wrote:
> 
> And if memory serves, it was around 08:30 Eastern yesterday on 14.080
> 
> Dave wo2x
> 
> 
> -Original Message-
> From: WW3S  
> Sent: Monday, June 24, 2019 5:03 PM
> To: Dave 
> Cc: David Gilbert ; elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K4 Field Day report
> 
> PIE or MIE ? I was at W3MIE, IC-7300, very little ALC deflection, but would
> sure like to know if it was us
> 
> Sent from my iPad
> 
>> On Jun 24, 2019, at 4:05 PM, Dave  wrote:
>> 
>> W3PIE on 14.080 FT8 was splattering prettybad yesterday morning. Spikes up
> and down the passband. Surely an overdrive issue with audio levels.
>> 
>> Dave wo2x
>> 
>> Sent from my iPad
>> 
>>> On Jun 24, 2019, at 3:09 PM, David Gilbert 
> wrote:
>>> 
>>> 
>>> There isn't a rig on the planet that will take out actual splatter,
> although you MIGHT be able to filter out some of it at audio depending upon
> the offender's voice characteristics.  If the trash is truly within your
> passband at RF you are going to hear it.
>>> 
>>> Most of that occurs due to sheer ignorance on the part of the operator,
> but the sad thing is that there are hams out there who will intentionally
> overdrive their rigs in order to create "elbow room" for themselves.  On CW
> they do it with fast rise times to generate key clicks.  I've seen posts
> from guys who admit doing it.
>>> 
>>> 73,
>>> Dave   AB7E
>>> 
>>> 
 On 6/24/2019 11:44 AM, Mark Goldberg wrote:
 I'd be interested to hear how it does in the presence of close in 
 strong signals, especially SSB. I was operating a KX3 on SSB in 
 close frequency to someone that was far away, but they had all the 
 knobs up to 11 and was maybe S9+20 and about 10 kHz wide with lots 
 of splatter. I could hear anyone that came back to me but I 
 eventually abandoned the frequency because most could not hear me. 
 20 SSB was wall to wall with someone about every 1.5 kHz or closer.
 
 73,
 
 Mark
>>> 
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net Please help support this 
>>> email list: http://www.qsl.net/donate.html Message delivered to 
>>> rocke...@gmail.com
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this email 
>> list: http://www.qsl.net/donate.html Message delivered to 
>> w...@zoominternet.net
> 
> 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] Low Power Output on 160 and 6 meters

2019-06-24 Thread EVERETT SHARP via Elecraft
I have three K3S and over the week-end I connected each of them to my Bird watt 
meter, with a Dummy load. Each of K3S were updated to the current Firmware and 
each had the 5 and 50 watt calibrations run. 

What I found was all 3 showed from 80 to 90 watts output on 160 meters and on 6 
 meters I saw 75 to 90 watts. All other bands showed typically
105 to 110 watts. However, one of the K3S showed exactly 100 watts on all bands 
except for the lower power on 160 and 6 meters. 

I did check one of the K3S before doing the current Firmware update and saw no 
difference before and after the up date on 160 and 6 meter power output. 

Does anyone have any idea as to why I am seeing the lower outputs on 160 and 6 
meters. 

Everett N4CY

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Elecraft Digest, Vol 182, Issue 34 (Low power out put on 160 and 6 Meters)

2019-06-24 Thread EVERETT SHARP via Elecraft
I have three K3S and over the week-end I connected each of them to my Bird watt 
meter, with a Dummy load. Each of K3S were updated to the current Firmware and 
each had the 5 and 50 watt calibrations run. 

What I found was all 3 showed from 80 to 90 watts output on 160 meters and on 6 
 meters I saw 75 to 90 watts. All other bands showed typically from 105 to 110 
watts. However, one of the K3S showed exactly 100 watts on all bands except for 
the lower power on 160 and 6 meters. 

I did check one of the K3S before doing the current Firmware update and saw no 
difference before and after the up date on 160 and 6 meter power output. 

Does anyone have any ideas as to why I am seeing the lower outputs on 160 and 6 
meters. 

Everett N4CY

> On Jun 24, 2019, at 5:05 PM, elecraft-requ...@mailman.qth.net wrote:
> 
> Send Elecraft mailing list submissions to
>elecraft@mailman.qth.net
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
>elecraft-requ...@mailman.qth.net
> 
> You can reach the person managing the list at
>elecraft-ow...@mailman.qth.net
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
> 
> 
> Today's Topics:
> 
>   1. [KX3] SPOT failure (Petr, OK1RP/M0SIS)
>   2. Re: new dead K3s still not fixed (Charlie T)
>   3. Re: [KX3] SPOT failure (Nr4c)
>   4. K4 Field Day report (Wayne Burdick)
>   5. KX2 Paddle question (Kenneth Bell)
>   6. Re: K4 Field Day report (Nr4c)
>   7. Re: KX2 Paddle question (Roy Koeppe)
>   8. Re: Possible issue with K3 Line In port? (k...@juno.com)
>   9. Re: K4 Field Day report (Mark Goldberg)
>  10. Re: K4 Field Day report (Mark Goldberg)
>  11. All knobs at max ... (Ken G Kopp)
>  12. Re: K4 Field Day report (David Gilbert)
>  13.  KX3 won't go above 10W (Fred Soop)
>  14. Re: KX3 won't go above 10W (Mark Goldberg)
>  15. Re: K4 Field Day report (Dave)
>  16. Re: K4 Field Day report (Dean L)
>  17. Re: All knobs at max ... (Bob McGraw K4TAX)
>  18. Re: All knobs at max ... (Walter Underwood)
>  19. Re: K4 Field Day report (WW3S)
>  20. Re: KX3 won't go above 10W (Jim Brown)
>  21. Re: All knobs at max ... (Wes)
>  22. Re: KX3 won't go above 10W (Chris Waldrup)
>  23. Re: Possible issue with K3 Line In port? (Paula Uscian)
> 
> 
> --
> 
> Message: 1
> Date: Mon, 24 Jun 2019 08:34:06 -0700 (MST)
> From: "Petr, OK1RP/M0SIS" 
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] [KX3] SPOT failure
> Message-ID: <1561390446890-0.p...@n2.nabble.com>
> Content-Type: text/plain; charset=us-ascii
> 
> Hi all,
> 
> did someone noticed that SPOT function is failing (or better say failing
> quite often) when NTCH filter is turned ON? The same happends also on K3...
> 
> 
> 
> 
> 
> -
> 73 - Petr, OK1RP 
> "Apple & Elecraft freak"
> B:http://ok1rp.blogspot.com
> MeWe: https://bit.ly/2HGPoDx
> MeWe: https://bit.ly/2FmwvDt
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> 
> 
> --
> 
> Message: 2
> Date: Thu, 20 Jun 2019 07:33:38 -0400
> From: "Charlie T" 
> To: 
> Subject: Re: [Elecraft] new dead K3s still not fixed
> Message-ID: <000201d5275c$049f9760$0ddec620$@erols.com>
> Content-Type: text/plain;charset="us-ascii"
> 
> Just to be clear, were these two radios recently purchased directly from
> Elecraft, or were they "pre-owned" when you bought them?
> 
> 73, Charlie k3ICH
> 
> 
> 
> -Original Message-
> From: elecraft-boun...@mailman.qth.net  On
> Behalf Of KD7PY
> Sent: Wednesday, June 19, 2019 11:19 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] new dead K3s still not fixed
> 
> sorry thats a K3s in kit form. not a K3,   
> 
> Ed
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to pin...@erols.com 
> 
> 
> 
> --
> 
> Message: 3
> Date: Mon, 24 Jun 2019 12:24:43 -0400
> From: Nr4c 
> To: "Petr, OK1RP/M0SIS" 
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] [KX3] SPOT failure
> Message-ID: <29e40cf7-7478-40fb-9155-1ce631b17...@widomaker.com>
> Content-Type: text/plain;charset=utf-8
> 
> I don?t think Mitch works in CW. When ON it would notch out the signal. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Jun 24, 2019, at 11:34 AM, Petr, OK1RP/M0SIS  wrote:
>> 
>> Hi all,
>> 
>> did someone noticed that SPOT function is failing (or better say failing
>> quite often) when NTCH filter is turned ON? The same happends also on K3...
>> 
>> 

Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Fred Jensen
You might try a drop of Deoxit on the plug and then insert and remove 
several times Paula.  I've had to do that with my K2 a couple of times.


73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 6/24/2019 3:05 PM, Paula Uscian wrote:

  Thanks to the many people who responded to my post, it is much appreciated. I 
was thinking Joe's recommendation below was my last option. But then a strange 
thing happened.
In doing some last checks before exploratory surgery on the K3's IO board, I 
decided to unplug the Phones jack of my Radiosport headset from the front of 
the rig and plug it into the phones jack on the TASCAM to confirm that I was 
hearing tones on TX. I did hear the tones (as I had before with the phones 
plugged into the K3 and listening via the K3 monitor). But after I plugged the 
Radiosport phone plug back into the K3, voila -- I have a reading on the ALC 
meter.
Of perhaps greater significance, I verified operation is now fine by completing 
a Q on FT8.
I also now have TX for RTTY as well.
I'd like to think I'm home free due to clean living ;-), but fear I may have a 
dreaded intermittent issue. Time will tell.
Many tnx agn to all who responded, your comments were most helpful. For 
completeness of this thread, I've included responses to some of the 
recommendations and questions below.
73 Paula k9ir



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Field Day report

2019-06-24 Thread rocketnj
And if memory serves, it was around 08:30 Eastern yesterday on 14.080

Dave wo2x


-Original Message-
From: WW3S  
Sent: Monday, June 24, 2019 5:03 PM
To: Dave 
Cc: David Gilbert ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K4 Field Day report

PIE or MIE ? I was at W3MIE, IC-7300, very little ALC deflection, but would
sure like to know if it was us

Sent from my iPad

> On Jun 24, 2019, at 4:05 PM, Dave  wrote:
> 
> W3PIE on 14.080 FT8 was splattering prettybad yesterday morning. Spikes up
and down the passband. Surely an overdrive issue with audio levels.
> 
> Dave wo2x
> 
> Sent from my iPad
> 
>> On Jun 24, 2019, at 3:09 PM, David Gilbert 
wrote:
>> 
>> 
>> There isn't a rig on the planet that will take out actual splatter,
although you MIGHT be able to filter out some of it at audio depending upon
the offender's voice characteristics.  If the trash is truly within your
passband at RF you are going to hear it.
>> 
>> Most of that occurs due to sheer ignorance on the part of the operator,
but the sad thing is that there are hams out there who will intentionally
overdrive their rigs in order to create "elbow room" for themselves.  On CW
they do it with fast rise times to generate key clicks.  I've seen posts
from guys who admit doing it.
>> 
>> 73,
>> Dave   AB7E
>> 
>> 
>>> On 6/24/2019 11:44 AM, Mark Goldberg wrote:
>>> I'd be interested to hear how it does in the presence of close in 
>>> strong signals, especially SSB. I was operating a KX3 on SSB in 
>>> close frequency to someone that was far away, but they had all the 
>>> knobs up to 11 and was maybe S9+20 and about 10 kHz wide with lots 
>>> of splatter. I could hear anyone that came back to me but I 
>>> eventually abandoned the frequency because most could not hear me. 
>>> 20 SSB was wall to wall with someone about every 1.5 kHz or closer.
>>> 
>>> 73,
>>> 
>>> Mark
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> rocke...@gmail.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> w...@zoominternet.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] K4 Field Day report

2019-06-24 Thread rocketnj
Definitely W3PIE

I kept sending W3PIE CK LEVELS but guess they didn't know what they were
looking at. You could see the spikes across their whole TX passband and
noise floor rise.

Dave wo2x

-Original Message-
From: WW3S  
Sent: Monday, June 24, 2019 5:03 PM
To: Dave 
Cc: David Gilbert ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K4 Field Day report

PIE or MIE ? I was at W3MIE, IC-7300, very little ALC deflection, but would
sure like to know if it was us

Sent from my iPad

> On Jun 24, 2019, at 4:05 PM, Dave  wrote:
> 
> W3PIE on 14.080 FT8 was splattering prettybad yesterday morning. Spikes up
and down the passband. Surely an overdrive issue with audio levels.
> 
> Dave wo2x
> 
> Sent from my iPad
> 
>> On Jun 24, 2019, at 3:09 PM, David Gilbert 
wrote:
>> 
>> 
>> There isn't a rig on the planet that will take out actual splatter,
although you MIGHT be able to filter out some of it at audio depending upon
the offender's voice characteristics.  If the trash is truly within your
passband at RF you are going to hear it.
>> 
>> Most of that occurs due to sheer ignorance on the part of the operator,
but the sad thing is that there are hams out there who will intentionally
overdrive their rigs in order to create "elbow room" for themselves.  On CW
they do it with fast rise times to generate key clicks.  I've seen posts
from guys who admit doing it.
>> 
>> 73,
>> Dave   AB7E
>> 
>> 
>>> On 6/24/2019 11:44 AM, Mark Goldberg wrote:
>>> I'd be interested to hear how it does in the presence of close in 
>>> strong signals, especially SSB. I was operating a KX3 on SSB in 
>>> close frequency to someone that was far away, but they had all the 
>>> knobs up to 11 and was maybe S9+20 and about 10 kHz wide with lots 
>>> of splatter. I could hear anyone that came back to me but I 
>>> eventually abandoned the frequency because most could not hear me. 
>>> 20 SSB was wall to wall with someone about every 1.5 kHz or closer.
>>> 
>>> 73,
>>> 
>>> Mark
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> rocke...@gmail.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> w...@zoominternet.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Paula Uscian
 Thanks to the many people who responded to my post, it is much appreciated. I 
was thinking Joe's recommendation below was my last option. But then a strange 
thing happened.
In doing some last checks before exploratory surgery on the K3's IO board, I 
decided to unplug the Phones jack of my Radiosport headset from the front of 
the rig and plug it into the phones jack on the TASCAM to confirm that I was 
hearing tones on TX. I did hear the tones (as I had before with the phones 
plugged into the K3 and listening via the K3 monitor). But after I plugged the 
Radiosport phone plug back into the K3, voila -- I have a reading on the ALC 
meter.
Of perhaps greater significance, I verified operation is now fine by completing 
a Q on FT8.
I also now have TX for RTTY as well.
I'd like to think I'm home free due to clean living ;-), but fear I may have a 
dreaded intermittent issue. Time will tell.
Many tnx agn to all who responded, your comments were most helpful. For 
completeness of this thread, I've included responses to some of the 
recommendations and questions below.
73 Paula k9ir
1, VOX shouldn't be needed with FT8 using WSJT as it communicates with the K3 
via CAT commands. FYI no difference with or without VOX. I have used VOX for 
RTTY AFSK in the past, but got disabused of that sin when I had some issues 
with WinWarbler that were resolved by running Commander.2. It is difficult for 
me to test a different cable as the TASCAM Line out consists of 2 RCA jacks. I 
happen to have a cable with 2 RCA plugs at one end and a 3.5mm plug at the 
other end, but I don't have another one to try (note to self -- get another 
cable just in case). However, I did run a totally different 3.5mm to 3.5mm 
cable from the Line Out (Green) port on the PC to the Line In port on the K3 
and got the same failure (AFTER reconfiguring the software to look to the 
internal sound card for TX). Yes, it is possible I have 2 bad sound cards and 2 
bad cables, but I'm playing the odds for next steps ;-).3. I have been using 
the meter selection that shows ALC during these tests.4. I do hear tones -- a 
steady tone when I click the Tune button and modulating tones when I click the 
TX button, in WSJT -- in my headset, so I think the TASCAM Line Out is 
working.I just see no bars on the ALC display.
I also checked to make sure recent Windows 10 updates didn't alter my Privacy 
settings for the microphone; those permissions remain the same as when the 
system was working.
On Monday, June 24, 2019, 08:40:09 AM CDT, Joe Subich, W4TV 
 wrote:  
 
 
Check L4 and L5 on the KIO3 Audio Input board.  They are in series with
the Line IN audio and return lines and have been known to open.  The
quick fix is to simply bypass them with jumpers.

73,

    ... Joe, W4TV


On 2019-06-24 9:29 AM, Paula Uscian wrote:
> I suspect I may have an issue with the Line In port of my K3, as my ability 
> to TX in any digital mode has gone away.
> 
> Setup:
> 1. Using a Tascam US-122 MKII outboard sound card.
> 2. MIC SEL is set to Line In on the K3.
> 3. Digital software, e.g., WinWarbler and WSJT, have the Tascam selected for 
> TX and RX.
> 4. Mode selection for FT8 is set to Data, for RTTY is set to AFSK 45 bps.
> 5. Levels are the same as when this system worked – K3 Mic level is set 
> around 43-44.
> 
> Symptoms:
> 1. When I try to TX on FT8 from within WSJT, the K3 red TX light comes on and 
> over my headphones I can hear a steady tuning tone, but I have no power out, 
> not one bar.
> 2. During TX I do hear “behind” the tones a brief low level buzzy/crackly 
> sound that recurs every second or so.
> 3. I get the same results as above when trying to TX in WSJT, though I hear 
> tones typical of a transmission vs. a steady tone.
> 4. I get the same results as above when I switch to RTTY and TX within 
> WinWarbler; RYRYRY, but no power out.
> 5. The Tascam and WSJT work fine together to decode FT8 signals.
> 
> T-shooting Steps to Date:
> 1. Uninstalled, rebooted and reinstalled all Tascam software and current 
> drivers. Same results.
> 2. Tried the Line Out from the internal PC soundcard to the Line In on the 
> K3. This also involved using a different cable from that connecting the 
> Tascam to the K3. Reconfigured the digital software to use the internal sound 
> card for TX. Same results as described above (including the noise).
> 3. Verified the K3 does TX (at least on CW).
> 
> I suspect the board with the Line In port may have gone bad, but not sure if 
> that’s the issue. If so, is there anything further worth checking or should I 
> just replace the board?
> 
> Thanks for any guidance!
> 
> 73 Paula k9ir
> 
> Sent from Mail for Windows 10
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email 

Re: [Elecraft] KX3 won't go above 10W

2019-06-24 Thread Chris Waldrup
Thank you. 
Gigaparts is local to me and I see they have the Bioennos in stock!!

Chris 

> On Jun 24, 2019, at 4:35 PM, Jim Brown  wrote:
> 
>> On 6/24/2019 12:59 PM, Mark Goldberg wrote:
>> Go with LiFePO4 cells
> 
> Yes. This ham-friendly company sells a wide range of LiFePO4 batteries. 
> Charge before you leave home (all Li batteries require a charger designed for 
> their specific chemistry, voltage, and capacity), connect to your KX2/3 
> external power jack. Choose the capacity/weight that suits your planned use.
> 
> $50 will get you 3Ah that weighs 13 oz; add $15 for the charger. A 6Ah 
> battery goes for $80, approximately twice the weight. I paid about $195 for a 
> 20Ah battery that weighs 5.4#, +$20 for a faster charger.
> 
> https://www.bioennopower.com/collections/12v-series-lifepo4-batteries
> 
> 73, Jim K9YC
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kd4...@gmail.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] All knobs at max ...

2019-06-24 Thread Wes
ARRL always does its best to keep me from copying the FB Bulletin. I finally 
fooled them this year.


I actually removed them from my estate plan after getting to much grief some 
years ago from the FD guru at headquarters after I simply asked that the 
schedule also list the times in GMT.  I'm in AZ.  We know that you can't 
actually save daylight by tweaking your clock, so we don't.  ARRL publishes the 
zone times as if everyone reset their clock and they are so parochial to not 
even mention DST on the column headings.   I've missed FMTs for similar reasons.


Wes  N7WS

On 6/24/2019 1:55 PM, Walter Underwood wrote:

I was just thinking, they should give 100 points for a positive report from a 
Volunteer Monitor. Because Field Day clearly needs more ways to get points...

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX3 won't go above 10W

2019-06-24 Thread Jim Brown

On 6/24/2019 12:59 PM, Mark Goldberg wrote:

Go with LiFePO4 cells


Yes. This ham-friendly company sells a wide range of LiFePO4 batteries. 
Charge before you leave home (all Li batteries require a charger 
designed for their specific chemistry, voltage, and capacity), connect 
to your KX2/3 external power jack. Choose the capacity/weight that suits 
your planned use.


$50 will get you 3Ah that weighs 13 oz; add $15 for the charger. A 6Ah 
battery goes for $80, approximately twice the weight. I paid about $195 
for a 20Ah battery that weighs 5.4#, +$20 for a faster charger.


https://www.bioennopower.com/collections/12v-series-lifepo4-batteries

73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] K4 Field Day report

2019-06-24 Thread WW3S
PIE or MIE ? I was at W3MIE, IC-7300, very little ALC deflection, but would 
sure like to know if it was us

Sent from my iPad

> On Jun 24, 2019, at 4:05 PM, Dave  wrote:
> 
> W3PIE on 14.080 FT8 was splattering prettybad yesterday morning. Spikes up 
> and down the passband. Surely an overdrive issue with audio levels.
> 
> Dave wo2x
> 
> Sent from my iPad
> 
>> On Jun 24, 2019, at 3:09 PM, David Gilbert  wrote:
>> 
>> 
>> There isn't a rig on the planet that will take out actual splatter, although 
>> you MIGHT be able to filter out some of it at audio depending upon the 
>> offender's voice characteristics.  If the trash is truly within your 
>> passband at RF you are going to hear it.
>> 
>> Most of that occurs due to sheer ignorance on the part of the operator, but 
>> the sad thing is that there are hams out there who will intentionally 
>> overdrive their rigs in order to create "elbow room" for themselves.  On CW 
>> they do it with fast rise times to generate key clicks.  I've seen posts 
>> from guys who admit doing it.
>> 
>> 73,
>> Dave   AB7E
>> 
>> 
>>> On 6/24/2019 11:44 AM, Mark Goldberg wrote:
>>> I'd be interested to hear how it does in the presence of close in strong
>>> signals, especially SSB. I was operating a KX3 on SSB in close frequency to
>>> someone that was far away, but they had all the knobs up to 11 and was
>>> maybe S9+20 and about 10 kHz wide with lots of splatter. I could hear
>>> anyone that came back to me but I eventually abandoned the frequency
>>> because most could not hear me. 20 SSB was wall to wall with someone about
>>> every 1.5 kHz or closer.
>>> 
>>> 73,
>>> 
>>> Mark
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rocke...@gmail.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w...@zoominternet.net 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] All knobs at max ...

2019-06-24 Thread Walter Underwood
I was just thinking, they should give 100 points for a positive report from a 
Volunteer Monitor. Because Field Day clearly needs more ways to get points...

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Jun 24, 2019, at 1:43 PM, Bob McGraw K4TAX  wrote:
> 
> There is w too much of that on the air today.I'll be glad to see 
> the day in which Riley Hollingsworth gets the VM program up and running.
> 
> 73
> 
> Bob, K4TAX
> 
> 
> On 6/24/2019 1:59 PM, Ken G Kopp wrote:
>> Such offensive behavior is an age-old ploy to maintain a clear frequency,
>> especially when the operator's call is hidden by the use of a club / seldom
>> used call, such as on FD.
>> 
>> I'm -NOT- advocating such offensive behavior ... merely stating the obvious.
>> 
>> 73
>> 
>> K0PP
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rmcg...@blomand.net
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] All knobs at max ...

2019-06-24 Thread Bob McGraw K4TAX
There is w too much of that on the air today.    I'll be glad to 
see the day in which Riley Hollingsworth gets the VM program up and 
running.


73

Bob, K4TAX


On 6/24/2019 1:59 PM, Ken G Kopp wrote:

Such offensive behavior is an age-old ploy to maintain a clear frequency,
especially when the operator's call is hidden by the use of a club / seldom
used call, such as on FD.

I'm -NOT- advocating such offensive behavior ... merely stating the obvious.

73

K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rmcg...@blomand.net



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Field Day report

2019-06-24 Thread Dean L
Great update Wayne

Well it's all relative.
Saturday, I got to FD, 2.5 hours from home, to a sister Clubs operation,
they invited me to come down and work some cw.
When I arrived, they were running an American rig (not Elecraft) on  CW
station, I operated it for a few hours.

 I asked if they minded if I ran my own radio, which was no problem.

I'm sure  glad I brought my pelican case, with my trusty "old" k3 and p3,
no "s", no updates, no narrow filters, no nuttin!

It was like going from an HW-7 to a K2...

Sorry, but I'm ruined.

Have Elecraft, will travel.


I won't be moving to a k4... No need.

 I'm happy.


73 all
Dean K2WW

On Mon, Jun 24, 2019, 13:32 Nr4c  wrote:

> Hopefully there will be a lot of them in users hands by then (MINE)!!
>
> Thanks for the update.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Jun 24, 2019, at 1:11 PM, Wayne Burdick  wrote:
> >
> > George (KJ6VU), John (KJ6K) and I operated a basic K4 for several hours
> as the 20 meter CW station at the Bay-Net Field Day site east of San Jose.
> This was the K4's first outdoor shake-down. The stakes were high, since the
> K4 has to pick up where the K3S/P3 leave off, fulfilling a dual role as
> both a high-end desktop and field/portable station.
> >
> > Observations:
> >
> > - the light weight (~10 pounds) made it easy to transport and set up
> >
> > - there was virtually no mutual interference between the K4 and a very
> active 40 meter SSB station using an antenna about 40' away
> >
> > - thanks to the low noise at this location we were able to hear many
> weak signals clustered together, and found signal clarity to be excellent
> >
> > - the LCD was clearly visible, without color washout, despite a full
> assault by bright sunlight bleeding through our translucent white tent
> cloth (some other radios at the same location had displays that were almost
> impossible to see)
> >
> > - the ATU did was able to tune a narrow-banded 20 meter yagi on other
> bands, when necessary, including 15, 10, and 6 meters
> >
> > - the radio ran from a very small Li-Ion battery (KXBT2, ~2.5 AH) for
> quite awhile, proving it works at 11 V, which is important for stations
> running from a somewhat depleted car battery or other emergency supply
> >
> > - operators were very complimentary of the internal speaker, though I'm
> partial to stereo audio and was using a pair of 8", 4 ohm (passive)
> external speakers most of the time
> >
> > We had a bit of fun late in the afternoon on Saturday when we switched
> from the Yagi to an AX1, Elecraft's 4 foot 20 meter whip. This may seem
> frivolous, but it's an important test because it shows that the radio's
> shielding is working well. It should handle an end-fed wire with a balun
> right at the antenna jack.
> >
> > Here are some comments we received afterward from KJ6K:
> >
> > "It was a real thrill to play with the K4 while making making CW
> contacts with it during Field Day. It's an amazing technical and usability
> design achievement. The user interface for many modern radios is so complex
> that an operator may need to refer to the manual frequently to figure out
> how to access a desired function, and never be able to do so quickly. The
> display on the K4 is gorgeous, and the use of touch, along with physical
> controls, provides a very intuitive and efficient user interface.
> >
> > "My own interests in ham radio have always been mostly in the science
> and engineering, so my operating is mostly casual, with HF CW my favorite
> mode. The architecture of the K4 is really exciting; the performance and
> endless possibilities for features and connectivity is really cool."
> >
> > Thanks, John!
> >
> > Looking forward to full-contact Field Day battle mode with a couple of
> K4s next year :)
> >
> > Wayne
> > N6KR
> >
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n...@widomaker.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dean.k...@gmail.com
>

On Mon, Jun 24, 2019, 13:32 Nr4c  wrote:

> Hopefully there will be a lot of them in users hands by then (MINE)!!
>
> Thanks for the update.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Jun 24, 2019, at 1:11 PM, Wayne Burdick  wrote:
> >
> > George (KJ6VU), John (KJ6K) and I operated a basic K4 for several hours
> as the 20 meter CW station at the Bay-Net Field Day site east of San Jose.
> This was 

Re: [Elecraft] K4 Field Day report

2019-06-24 Thread Dave
W3PIE on 14.080 FT8 was splattering prettybad yesterday morning. Spikes up and 
down the passband. Surely an overdrive issue with audio levels.

Dave wo2x

Sent from my iPad

> On Jun 24, 2019, at 3:09 PM, David Gilbert  wrote:
> 
> 
> There isn't a rig on the planet that will take out actual splatter, although 
> you MIGHT be able to filter out some of it at audio depending upon the 
> offender's voice characteristics.  If the trash is truly within your passband 
> at RF you are going to hear it.
> 
> Most of that occurs due to sheer ignorance on the part of the operator, but 
> the sad thing is that there are hams out there who will intentionally 
> overdrive their rigs in order to create "elbow room" for themselves.  On CW 
> they do it with fast rise times to generate key clicks.  I've seen posts from 
> guys who admit doing it.
> 
> 73,
> Dave   AB7E
> 
> 
>> On 6/24/2019 11:44 AM, Mark Goldberg wrote:
>> I'd be interested to hear how it does in the presence of close in strong
>> signals, especially SSB. I was operating a KX3 on SSB in close frequency to
>> someone that was far away, but they had all the knobs up to 11 and was
>> maybe S9+20 and about 10 kHz wide with lots of splatter. I could hear
>> anyone that came back to me but I eventually abandoned the frequency
>> because most could not hear me. 20 SSB was wall to wall with someone about
>> every 1.5 kHz or closer.
>> 
>> 73,
>> 
>> Mark
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rocke...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] KX3 won't go above 10W

2019-06-24 Thread Mark Goldberg
Go with LiFePO4 cells. Four cells will keep the voltage between 12 and 14.4
V from 10% to 100% state of charge and most of the time the voltage is
between 13 and 13.5 V. I use small ones (3 AH )for backpack portable
operation, 20 AH for fixed portable and my RV has 400 Ah to run the rig
forever! The KX3 stays at the max 15W almost all of the time. No fuss, just
works, and they keep their charge for months. Small ones start at about $50.

Regards,

Mark


On Mon, Jun 24, 2019 at 12:40 PM Fred Soop  wrote:

> I have looked at the power issue (even though I'm not yet a KX3 owner) and
> with NiMH cells at 1.2 V, the 8 cell internal battery holder would only be
> 9.6 V. I'm considering an external battery pack with (2) 6 cell holders for
> 12 cells total. That would be 14.4 V total. A single series diode would
> bring that down to 13.7 V. The NiMH cells do start at 1.5 V with full
> charge for a short time, so some additional series diodes would be needed
> with a fresh charge and could be switched out as the cell voltage drops to
> 1.2 V. A voltmeter and rotary switch with 5 diodes would do the job.
>
> 73
> Fred Soop AC9RQ
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to marklgoldb...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] KX3 won't go above 10W

2019-06-24 Thread Fred Soop
I have looked at the power issue (even though I'm not yet a KX3 owner) and with 
NiMH cells at 1.2 V, the 8 cell internal battery holder would only be 9.6 V. 
I'm considering an external battery pack with (2) 6 cell holders for 12 cells 
total. That would be 14.4 V total. A single series diode would bring that down 
to 13.7 V. The NiMH cells do start at 1.5 V with full charge for a short time, 
so some additional series diodes would be needed with a fresh charge and could 
be switched out as the cell voltage drops to 1.2 V. A voltmeter and rotary 
switch with 5 diodes would do the job.

73
Fred Soop AC9RQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] K4 Field Day report

2019-06-24 Thread David Gilbert


There isn't a rig on the planet that will take out actual splatter, 
although you MIGHT be able to filter out some of it at audio depending 
upon the offender's voice characteristics.  If the trash is truly within 
your passband at RF you are going to hear it.


Most of that occurs due to sheer ignorance on the part of the operator, 
but the sad thing is that there are hams out there who will 
intentionally overdrive their rigs in order to create "elbow room" for 
themselves.  On CW they do it with fast rise times to generate key 
clicks.  I've seen posts from guys who admit doing it.


73,
Dave   AB7E


On 6/24/2019 11:44 AM, Mark Goldberg wrote:

I'd be interested to hear how it does in the presence of close in strong
signals, especially SSB. I was operating a KX3 on SSB in close frequency to
someone that was far away, but they had all the knobs up to 11 and was
maybe S9+20 and about 10 kHz wide with lots of splatter. I could hear
anyone that came back to me but I eventually abandoned the frequency
because most could not hear me. 20 SSB was wall to wall with someone about
every 1.5 kHz or closer.

73,

Mark


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] All knobs at max ...

2019-06-24 Thread Ken G Kopp
Such offensive behavior is an age-old ploy to maintain a clear frequency,
especially when the operator's call is hidden by the use of a club / seldom
used call, such as on FD.

I'm -NOT- advocating such offensive behavior ... merely stating the obvious.

73

K0PP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] K4 Field Day report

2019-06-24 Thread Mark Goldberg
Oops, adding my call.

Mark,
W7MLG

On Mon, Jun 24, 2019 at 11:44 AM Mark Goldberg 
wrote:

> I'd be interested to hear how it does in the presence of close in strong
> signals, especially SSB. I was operating a KX3 on SSB in close frequency to
> someone that was far away, but they had all the knobs up to 11 and was
> maybe S9+20 and about 10 kHz wide with lots of splatter. I could hear
> anyone that came back to me but I eventually abandoned the frequency
> because most could not hear me. 20 SSB was wall to wall with someone about
> every 1.5 kHz or closer.
>
> 73,
>
> Mark
>
>
> On Mon, Jun 24, 2019 at 10:12 AM Wayne Burdick  wrote:
>
>> George (KJ6VU), John (KJ6K) and I operated a basic K4 for several hours
>> as the 20 meter CW station at the Bay-Net Field Day site east of San Jose.
>> This was the K4's first outdoor shake-down. The stakes were high, since the
>> K4 has to pick up where the K3S/P3 leave off, fulfilling a dual role as
>> both a high-end desktop and field/portable station.
>>
>> Observations:
>>
>> - the light weight (~10 pounds) made it easy to transport and set up
>>
>> - there was virtually no mutual interference between the K4 and a very
>> active 40 meter SSB station using an antenna about 40' away
>>
>> - thanks to the low noise at this location we were able to hear many weak
>> signals clustered together, and found signal clarity to be excellent
>>
>> - the LCD was clearly visible, without color washout, despite a full
>> assault by bright sunlight bleeding through our translucent white tent
>> cloth (some other radios at the same location had displays that were almost
>> impossible to see)
>>
>> - the ATU did was able to tune a narrow-banded 20 meter yagi on other
>> bands, when necessary, including 15, 10, and 6 meters
>>
>> - the radio ran from a very small Li-Ion battery (KXBT2, ~2.5 AH) for
>> quite awhile, proving it works at 11 V, which is important for stations
>> running from a somewhat depleted car battery or other emergency supply
>>
>> - operators were very complimentary of the internal speaker, though I'm
>> partial to stereo audio and was using a pair of 8", 4 ohm (passive)
>> external speakers most of the time
>>
>> We had a bit of fun late in the afternoon on Saturday when we switched
>> from the Yagi to an AX1, Elecraft's 4 foot 20 meter whip. This may seem
>> frivolous, but it's an important test because it shows that the radio's
>> shielding is working well. It should handle an end-fed wire with a balun
>> right at the antenna jack.
>>
>> Here are some comments we received afterward from KJ6K:
>>
>> "It was a real thrill to play with the K4 while making making CW contacts
>> with it during Field Day. It's an amazing technical and usability design
>> achievement. The user interface for many modern radios is so complex that
>> an operator may need to refer to the manual frequently to figure out how to
>> access a desired function, and never be able to do so quickly. The display
>> on the K4 is gorgeous, and the use of touch, along with physical controls,
>> provides a very intuitive and efficient user interface.
>>
>> "My own interests in ham radio have always been mostly in the science and
>> engineering, so my operating is mostly casual, with HF CW my favorite mode.
>> The architecture of the K4 is really exciting; the performance and endless
>> possibilities for features and connectivity is really cool."
>>
>> Thanks, John!
>>
>> Looking forward to full-contact Field Day battle mode with a couple of
>> K4s next year :)
>>
>> Wayne
>> N6KR
>>
>>
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to marklgoldb...@gmail.com
>>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] K4 Field Day report

2019-06-24 Thread Mark Goldberg
I'd be interested to hear how it does in the presence of close in strong
signals, especially SSB. I was operating a KX3 on SSB in close frequency to
someone that was far away, but they had all the knobs up to 11 and was
maybe S9+20 and about 10 kHz wide with lots of splatter. I could hear
anyone that came back to me but I eventually abandoned the frequency
because most could not hear me. 20 SSB was wall to wall with someone about
every 1.5 kHz or closer.

73,

Mark


On Mon, Jun 24, 2019 at 10:12 AM Wayne Burdick  wrote:

> George (KJ6VU), John (KJ6K) and I operated a basic K4 for several hours as
> the 20 meter CW station at the Bay-Net Field Day site east of San Jose.
> This was the K4's first outdoor shake-down. The stakes were high, since the
> K4 has to pick up where the K3S/P3 leave off, fulfilling a dual role as
> both a high-end desktop and field/portable station.
>
> Observations:
>
> - the light weight (~10 pounds) made it easy to transport and set up
>
> - there was virtually no mutual interference between the K4 and a very
> active 40 meter SSB station using an antenna about 40' away
>
> - thanks to the low noise at this location we were able to hear many weak
> signals clustered together, and found signal clarity to be excellent
>
> - the LCD was clearly visible, without color washout, despite a full
> assault by bright sunlight bleeding through our translucent white tent
> cloth (some other radios at the same location had displays that were almost
> impossible to see)
>
> - the ATU did was able to tune a narrow-banded 20 meter yagi on other
> bands, when necessary, including 15, 10, and 6 meters
>
> - the radio ran from a very small Li-Ion battery (KXBT2, ~2.5 AH) for
> quite awhile, proving it works at 11 V, which is important for stations
> running from a somewhat depleted car battery or other emergency supply
>
> - operators were very complimentary of the internal speaker, though I'm
> partial to stereo audio and was using a pair of 8", 4 ohm (passive)
> external speakers most of the time
>
> We had a bit of fun late in the afternoon on Saturday when we switched
> from the Yagi to an AX1, Elecraft's 4 foot 20 meter whip. This may seem
> frivolous, but it's an important test because it shows that the radio's
> shielding is working well. It should handle an end-fed wire with a balun
> right at the antenna jack.
>
> Here are some comments we received afterward from KJ6K:
>
> "It was a real thrill to play with the K4 while making making CW contacts
> with it during Field Day. It's an amazing technical and usability design
> achievement. The user interface for many modern radios is so complex that
> an operator may need to refer to the manual frequently to figure out how to
> access a desired function, and never be able to do so quickly. The display
> on the K4 is gorgeous, and the use of touch, along with physical controls,
> provides a very intuitive and efficient user interface.
>
> "My own interests in ham radio have always been mostly in the science and
> engineering, so my operating is mostly casual, with HF CW my favorite mode.
> The architecture of the K4 is really exciting; the performance and endless
> possibilities for features and connectivity is really cool."
>
> Thanks, John!
>
> Looking forward to full-contact Field Day battle mode with a couple of K4s
> next year :)
>
> Wayne
> N6KR
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to marklgoldb...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread k2te
Paula,

Your problem may be as simple as bad cable connections between the K3
line in and your soundcard.  I had the same problem that recurred several
times and drove me nuts.  I was getting audio out of the soundcard when
going to transmit.  (I also the problem with AFSK-A RTTY.)  I finally
found the problem by pressing on the cable at the line in port on the K3
while in TX mode and saw power out/ALC action return.  Replacing the
cable solved the problem.

73 de Ed


Warning from God Discovered in Human DNA
healthrevelations.net
http://thirdpartyoffers.juno.com/TGL3141/5d1116ce27c1a16ce0819st03vuc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] KX2 Paddle question

2019-06-24 Thread Roy Koeppe

Ken,

I don't own a KX2, but perhaps tiny applications of one of the various 
'threadlockers' on the market would be perfect. The thread lock comes in 
small tubes and is available in several "strengths."  Use only the lowest 
strength -- the high strength can be virtually permanent!


73,   Roy K6XK


-I’ve recently bought a KX2 and am enjoying it.  I have an annoying 
problem with the KX2 Paddle. The contacts continue to get loose. I have them 
adjusted so that there is very little play.  I set them up this way to keep 
the mechanical clacking noise down and liked it so much that I changed my 
other paddle for my shack radio to the same adjustment.


HOWEVER… on the KX2, after just a few minutes the paddles get loose again 
and start clacking again. There is a separate set-screw (that was loose) 
that I thought might make tighten onto the adjustment screw and keep it from 
backing out.  I’ve tightened them, but they don’t seem to affect the 
adjustment screw’s ability to get loose.  And, I don’t see these screws on 
the exploded view I got with the KX2 or on the PDF on their website. I guess 
a second question might be what do these screws do? One is visible on the 
top of the right-hand paddle and one is on the bottom of the left-hand 
paddle very near to the adjustment screws.


Thanks in advance,

-ken  K4EES




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Field Day report

2019-06-24 Thread Nr4c
Hopefully there will be a lot of them in users hands by then (MINE)!!

Thanks for the update. 

Sent from my iPhone
...nr4c. bill


> On Jun 24, 2019, at 1:11 PM, Wayne Burdick  wrote:
> 
> George (KJ6VU), John (KJ6K) and I operated a basic K4 for several hours as 
> the 20 meter CW station at the Bay-Net Field Day site east of San Jose. This 
> was the K4's first outdoor shake-down. The stakes were high, since the K4 has 
> to pick up where the K3S/P3 leave off, fulfilling a dual role as both a 
> high-end desktop and field/portable station. 
> 
> Observations:
> 
> - the light weight (~10 pounds) made it easy to transport and set up
> 
> - there was virtually no mutual interference between the K4 and a very active 
> 40 meter SSB station using an antenna about 40' away
> 
> - thanks to the low noise at this location we were able to hear many weak 
> signals clustered together, and found signal clarity to be excellent
> 
> - the LCD was clearly visible, without color washout, despite a full assault 
> by bright sunlight bleeding through our translucent white tent cloth (some 
> other radios at the same location had displays that were almost impossible to 
> see)
> 
> - the ATU did was able to tune a narrow-banded 20 meter yagi on other bands, 
> when necessary, including 15, 10, and 6 meters
> 
> - the radio ran from a very small Li-Ion battery (KXBT2, ~2.5 AH) for quite 
> awhile, proving it works at 11 V, which is important for stations running 
> from a somewhat depleted car battery or other emergency supply 
> 
> - operators were very complimentary of the internal speaker, though I'm 
> partial to stereo audio and was using a pair of 8", 4 ohm (passive) external 
> speakers most of the time
> 
> We had a bit of fun late in the afternoon on Saturday when we switched from 
> the Yagi to an AX1, Elecraft's 4 foot 20 meter whip. This may seem frivolous, 
> but it's an important test because it shows that the radio's shielding is 
> working well. It should handle an end-fed wire with a balun right at the 
> antenna jack.
> 
> Here are some comments we received afterward from KJ6K:
> 
> "It was a real thrill to play with the K4 while making making CW contacts 
> with it during Field Day. It's an amazing technical and usability design 
> achievement. The user interface for many modern radios is so complex that an 
> operator may need to refer to the manual frequently to figure out how to 
> access a desired function, and never be able to do so quickly. The display on 
> the K4 is gorgeous, and the use of touch, along with physical controls, 
> provides a very intuitive and efficient user interface.  
> 
> "My own interests in ham radio have always been mostly in the science and 
> engineering, so my operating is mostly casual, with HF CW my favorite mode. 
> The architecture of the K4 is really exciting; the performance and endless 
> possibilities for features and connectivity is really cool."
> 
> Thanks, John!
> 
> Looking forward to full-contact Field Day battle mode with a couple of K4s 
> next year :)
> 
> Wayne
> N6KR
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] KX2 Paddle question

2019-06-24 Thread Kenneth Bell
Hi

I’ve recently bought a KX2 and am enjoying it.  I have an annoying problem with 
the KX2 Paddle. The contacts continue to get loose. I have them adjusted so 
that there is very little play.  I set them up this way to keep the mechanical 
clacking noise down and liked it so much that I changed my other paddle for my 
shack radio to the same adjustment. 

HOWEVER… on the KX2, after just a few minutes the paddles get loose again and 
start clacking again. There is a separate set-screw (that was loose) that I 
thought might make tighten onto the adjustment screw and keep it from backing 
out.  I’ve tightened them, but they don’t seem to affect the adjustment screw’s 
ability to get loose.  And, I don’t see these screws on the exploded view I got 
with the KX2 or on the PDF on their website. I guess a second question might be 
what do these screws do? One is visible on the top of the right-hand paddle and 
one is on the bottom of the left-hand paddle very near to the adjustment 
screws. 

Thanks in advance,

-ken  K4EES 



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 Field Day report

2019-06-24 Thread Wayne Burdick
George (KJ6VU), John (KJ6K) and I operated a basic K4 for several hours as the 
20 meter CW station at the Bay-Net Field Day site east of San Jose. This was 
the K4's first outdoor shake-down. The stakes were high, since the K4 has to 
pick up where the K3S/P3 leave off, fulfilling a dual role as both a high-end 
desktop and field/portable station. 

Observations:

- the light weight (~10 pounds) made it easy to transport and set up

- there was virtually no mutual interference between the K4 and a very active 
40 meter SSB station using an antenna about 40' away

- thanks to the low noise at this location we were able to hear many weak 
signals clustered together, and found signal clarity to be excellent

- the LCD was clearly visible, without color washout, despite a full assault by 
bright sunlight bleeding through our translucent white tent cloth (some other 
radios at the same location had displays that were almost impossible to see)

- the ATU did was able to tune a narrow-banded 20 meter yagi on other bands, 
when necessary, including 15, 10, and 6 meters

- the radio ran from a very small Li-Ion battery (KXBT2, ~2.5 AH) for quite 
awhile, proving it works at 11 V, which is important for stations running from 
a somewhat depleted car battery or other emergency supply 

- operators were very complimentary of the internal speaker, though I'm partial 
to stereo audio and was using a pair of 8", 4 ohm (passive) external speakers 
most of the time

We had a bit of fun late in the afternoon on Saturday when we switched from the 
Yagi to an AX1, Elecraft's 4 foot 20 meter whip. This may seem frivolous, but 
it's an important test because it shows that the radio's shielding is working 
well. It should handle an end-fed wire with a balun right at the antenna jack.

Here are some comments we received afterward from KJ6K:

"It was a real thrill to play with the K4 while making making CW contacts with 
it during Field Day. It's an amazing technical and usability design 
achievement. The user interface for many modern radios is so complex that an 
operator may need to refer to the manual frequently to figure out how to access 
a desired function, and never be able to do so quickly. The display on the K4 
is gorgeous, and the use of touch, along with physical controls, provides a 
very intuitive and efficient user interface.  

"My own interests in ham radio have always been mostly in the science and 
engineering, so my operating is mostly casual, with HF CW my favorite mode. The 
architecture of the K4 is really exciting; the performance and endless 
possibilities for features and connectivity is really cool."

Thanks, John!

Looking forward to full-contact Field Day battle mode with a couple of K4s next 
year :)

Wayne
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] [KX3] SPOT failure

2019-06-24 Thread Nr4c
I don’t think Mitch works in CW. When ON it would notch out the signal. 

Sent from my iPhone
...nr4c. bill


> On Jun 24, 2019, at 11:34 AM, Petr, OK1RP/M0SIS  wrote:
> 
> Hi all,
> 
> did someone noticed that SPOT function is failing (or better say failing
> quite often) when NTCH filter is turned ON? The same happends also on K3...
> 
> 
> 
> 
> 
> -
> 73 - Petr, OK1RP 
> "Apple & Elecraft freak"
> B:http://ok1rp.blogspot.com
> MeWe: https://bit.ly/2HGPoDx
> MeWe: https://bit.ly/2FmwvDt
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] new dead K3s still not fixed

2019-06-24 Thread Charlie T
Just to be clear, were these two radios recently purchased directly from
Elecraft, or were they "pre-owned" when you bought them?

73, Charlie k3ICH



-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of KD7PY
Sent: Wednesday, June 19, 2019 11:19 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] new dead K3s still not fixed

 sorry thats a K3s in kit form. not a K3,   

Ed



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to pin...@erols.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] [KX3] SPOT failure

2019-06-24 Thread Petr, OK1RP/M0SIS
Hi all,

did someone noticed that SPOT function is failing (or better say failing
quite often) when NTCH filter is turned ON? The same happends also on K3...





-
73 - Petr, OK1RP 
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Don Wilhelm

If the red TX LED comes on, that is not the problem.

73,
Don W3FPR

On 6/24/2019 11:02 AM, David Box wrote:

Have you tried with VOX ON?
K5MWR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Brian Hunt
Try changing the bar graph on the K3 from power to ALC by doing a hold of the 
DISP button then transmit. Check to see if the level is set properly, i.e. 4 
bars with the fifth flickering. If not try setting the line-in gain to that 
level. GL

73,
Brian, K0DTJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Don Wilhelm

Paula,

Although you said 'it worked before', take a look at the ALC meter. 
With digital modes, you should have enough audio to drive it to 4 bars 
with the 5th bar flashing.  See the article on my website www.w3fpr.com.


Can you transmit in SSB mode?  If so, the K3 audio is fine and you can 
focus on the Line In or the soundcard output for the problem source.


73,
Don W3FPR

On 6/24/2019 9:29 AM, Paula Uscian wrote:

I suspect I may have an issue with the Line In port of my K3, as my ability to 
TX in any digital mode has gone away.

Setup:
1. Using a Tascam US-122 MKII outboard sound card.
2. MIC SEL is set to Line In on the K3.
3. Digital software, e.g., WinWarbler and WSJT, have the Tascam selected for TX 
and RX.
4. Mode selection for FT8 is set to Data, for RTTY is set to AFSK 45 bps.
5. Levels are the same as when this system worked – K3 Mic level is set around 
43-44.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread David Box
Have you tried with VOX ON?
K5MWR 

On June 24, 2019 8:39:52 AM CDT, Paula Uscian  wrote:
>No, VOX is turned off.
>
>Sent from Mail for Windows 10
>
>From: David Box
>Sent: Monday, June 24, 2019 8:36 AM
>To: elecraft@mailman.qth.net; Paula Uscian; elecraft@mailman.qth.net
>Subject: Re: [Elecraft] Possible issue with K3 Line In port?
>
>Is VOX turned on?
>K5MWR 
>On June 24, 2019 8:29:50 AM CDT, Paula Uscian 
>wrote:
>I suspect I may have an issue with the Line In port of my K3, as my
>ability to TX in any digital mode has gone away.
>
>Setup:
>1. Using a Tascam US-122 MKII outboard sound card.
>2. MIC SEL is set to Line In on the K3.
>3. Digital software, e.g., WinWarbler and WSJT, have the Tascam
>selected for TX and RX.
>4. Mode selection for FT8 is set to Data, for RTTY is set to AFSK 45
>bps.
>5. Levels are the same as when this system worked – K3 Mic level is set
>around 43-44.
>
>Symptoms:
>1. When I try to TX on FT8 from within WSJT, the K3 red TX light comes
>on and over my headphones I can hear a steady tuning tone, but I have
>no power out, not one bar.
>2. During TX I do hear “behind” the tones a brief low level
>buzzy/crackly sound that recurs every second or so.
>3. I get the same results as above when trying to TX in WSJT, though I
>hear tones typical of a transmission vs. a steady tone.
>4. I get the same results as above when I switch to RTTY and TX within
>WinWarbler; RYRYRY, but no power out.
>5. The Tascam and WSJT work fine together to decode FT8 signals.
>
>T-shooting Steps to Date:
>1. Uninstalled, rebooted and reinstalled all Tascam software and
>current drivers. Same results.
>2. Tried the Line Out from the internal PC soundcard to the Line In on
>the K3. This also involved using a different cable from that connecting
>the Tascam to the K3. Reconfigured the digital software to use the
>internal sound card for TX. Same results as described above (including
>the noise).
>3. Verified the K3 does TX (at least on CW).
>
>I suspect the board with the Line In port may have gone bad, but not
>sure if that’s the issue. If so, is there anything further worth
>checking or should I just replace the board?
>
>Thanks for any guidance!
>
>73 Paula k9ir
>
>Sent from Mail for Windows 10
>
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to do...@suddenlink.net 
>
>-- 
>Sent from my Android device with K-9 Mail. Please excuse my brevity.

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Don Wilhelm

Paula,

Have you verified that you have audio out of the soundcard?
Plug headphones or amplifier computer speakers into the soundcard line 
out jack and do a "transmit" from the software.  Do you hear audio 
tones?  If not, you have a soundcard problem.


73,
Don W3FPR

On 6/24/2019 9:29 AM, Paula Uscian wrote:

I suspect I may have an issue with the Line In port of my K3, as my ability to 
TX in any digital mode has gone away.

Setup:
1. Using a Tascam US-122 MKII outboard sound card.
2. MIC SEL is set to Line In on the K3.
3. Digital software, e.g., WinWarbler and WSJT, have the Tascam selected for TX 
and RX.
4. Mode selection for FT8 is set to Data, for RTTY is set to AFSK 45 bps.
5. Levels are the same as when this system worked – K3 Mic level is set around 
43-44.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Joe Subich, W4TV


Check L4 and L5 on the KIO3 Audio Input board.  They are in series with
the Line IN audio and return lines and have been known to open.  The
quick fix is to simply bypass them with jumpers.

73,

   ... Joe, W4TV


On 2019-06-24 9:29 AM, Paula Uscian wrote:

I suspect I may have an issue with the Line In port of my K3, as my ability to 
TX in any digital mode has gone away.

Setup:
1. Using a Tascam US-122 MKII outboard sound card.
2. MIC SEL is set to Line In on the K3.
3. Digital software, e.g., WinWarbler and WSJT, have the Tascam selected for TX 
and RX.
4. Mode selection for FT8 is set to Data, for RTTY is set to AFSK 45 bps.
5. Levels are the same as when this system worked – K3 Mic level is set around 
43-44.

Symptoms:
1. When I try to TX on FT8 from within WSJT, the K3 red TX light comes on and 
over my headphones I can hear a steady tuning tone, but I have no power out, 
not one bar.
2. During TX I do hear “behind” the tones a brief low level buzzy/crackly sound 
that recurs every second or so.
3. I get the same results as above when trying to TX in WSJT, though I hear 
tones typical of a transmission vs. a steady tone.
4. I get the same results as above when I switch to RTTY and TX within 
WinWarbler; RYRYRY, but no power out.
5. The Tascam and WSJT work fine together to decode FT8 signals.

T-shooting Steps to Date:
1. Uninstalled, rebooted and reinstalled all Tascam software and current 
drivers. Same results.
2. Tried the Line Out from the internal PC soundcard to the Line In on the K3. 
This also involved using a different cable from that connecting the Tascam to 
the K3. Reconfigured the digital software to use the internal sound card for 
TX. Same results as described above (including the noise).
3. Verified the K3 does TX (at least on CW).

I suspect the board with the Line In port may have gone bad, but not sure if 
that’s the issue. If so, is there anything further worth checking or should I 
just replace the board?

Thanks for any guidance!

73 Paula k9ir

Sent from Mail for Windows 10

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to li...@subich.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Paula Uscian
No, VOX is turned off.

Sent from Mail for Windows 10

From: David Box
Sent: Monday, June 24, 2019 8:36 AM
To: elecraft@mailman.qth.net; Paula Uscian; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Possible issue with K3 Line In port?

Is VOX turned on?
K5MWR 
On June 24, 2019 8:29:50 AM CDT, Paula Uscian  wrote:
I suspect I may have an issue with the Line In port of my K3, as my ability to 
TX in any digital mode has gone away.

Setup:
1. Using a Tascam US-122 MKII outboard sound card.
2. MIC SEL is set to Line In on the K3.
3. Digital software, e.g., WinWarbler and WSJT, have the Tascam selected for TX 
and RX.
4. Mode selection for FT8 is set to Data, for RTTY is set to AFSK 45 bps.
5. Levels are the same as when this system worked – K3 Mic level is set around 
43-44.

Symptoms:
1. When I try to TX on FT8 from within WSJT, the K3 red TX light comes on and 
over my headphones I can hear a steady tuning tone, but I have no power out, 
not one bar.
2. During TX I do hear “behind” the tones a brief low level buzzy/crackly sound 
that recurs every second or so.
3. I get the same results as above when trying to TX in WSJT, though I hear 
tones typical of a transmission vs. a steady tone.
4. I get the same results as above when I switch to RTTY and TX within 
WinWarbler; RYRYRY, but no power out.
5. The Tascam and WSJT work fine together to decode FT8 signals.

T-shooting Steps to Date:
1. Uninstalled, rebooted and reinstalled all Tascam software and current 
drivers. Same results.
2. Tried the Line Out from the internal PC soundcard to the Line In on the K3. 
This also involved using a different cable from that connecting the Tascam to 
the K3. Reconfigured the digital software to use the internal sound card for 
TX. Same results as described above (including the noise).
3. Verified the K3 does TX (at least on CW).

I suspect the board with the Line In port may have gone bad, but not sure if 
that’s the issue. If so, is there anything further worth checking or should I 
just replace the board?

Thanks for any guidance!

73 Paula k9ir

Sent from Mail for Windows 10

Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to do...@suddenlink.net 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread David Box
Is VOX turned on?
K5MWR 

On June 24, 2019 8:29:50 AM CDT, Paula Uscian  wrote:
>I suspect I may have an issue with the Line In port of my K3, as my
>ability to TX in any digital mode has gone away.
>
>Setup:
>1. Using a Tascam US-122 MKII outboard sound card.
>2. MIC SEL is set to Line In on the K3.
>3. Digital software, e.g., WinWarbler and WSJT, have the Tascam
>selected for TX and RX.
>4. Mode selection for FT8 is set to Data, for RTTY is set to AFSK 45
>bps.
>5. Levels are the same as when this system worked – K3 Mic level is set
>around 43-44.
>
>Symptoms:
>1. When I try to TX on FT8 from within WSJT, the K3 red TX light comes
>on and over my headphones I can hear a steady tuning tone, but I have
>no power out, not one bar.
>2. During TX I do hear “behind” the tones a brief low level
>buzzy/crackly sound that recurs every second or so.
>3. I get the same results as above when trying to TX in WSJT, though I
>hear tones typical of a transmission vs. a steady tone.
>4. I get the same results as above when I switch to RTTY and TX within
>WinWarbler; RYRYRY, but no power out.
>5. The Tascam and WSJT work fine together to decode FT8 signals.
>
>T-shooting Steps to Date:
>1. Uninstalled, rebooted and reinstalled all Tascam software and
>current drivers. Same results.
>2. Tried the Line Out from the internal PC soundcard to the Line In on
>the K3. This also involved using a different cable from that connecting
>the Tascam to the K3. Reconfigured the digital software to use the
>internal sound card for TX. Same results as described above (including
>the noise).
>3. Verified the K3 does TX (at least on CW).
>
>I suspect the board with the Line In port may have gone bad, but not
>sure if that’s the issue. If so, is there anything further worth
>checking or should I just replace the board?
>
>Thanks for any guidance!
>
>73 Paula k9ir
>
>Sent from Mail for Windows 10
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to do...@suddenlink.net 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Possible issue with K3 Line In port?

2019-06-24 Thread Paula Uscian
I suspect I may have an issue with the Line In port of my K3, as my ability to 
TX in any digital mode has gone away.

Setup:
1. Using a Tascam US-122 MKII outboard sound card.
2. MIC SEL is set to Line In on the K3.
3. Digital software, e.g., WinWarbler and WSJT, have the Tascam selected for TX 
and RX.
4. Mode selection for FT8 is set to Data, for RTTY is set to AFSK 45 bps.
5. Levels are the same as when this system worked – K3 Mic level is set around 
43-44.

Symptoms:
1. When I try to TX on FT8 from within WSJT, the K3 red TX light comes on and 
over my headphones I can hear a steady tuning tone, but I have no power out, 
not one bar.
2. During TX I do hear “behind” the tones a brief low level buzzy/crackly sound 
that recurs every second or so.
3. I get the same results as above when trying to TX in WSJT, though I hear 
tones typical of a transmission vs. a steady tone.
4. I get the same results as above when I switch to RTTY and TX within 
WinWarbler; RYRYRY, but no power out.
5. The Tascam and WSJT work fine together to decode FT8 signals.

T-shooting Steps to Date:
1. Uninstalled, rebooted and reinstalled all Tascam software and current 
drivers. Same results.
2. Tried the Line Out from the internal PC soundcard to the Line In on the K3. 
This also involved using a different cable from that connecting the Tascam to 
the K3. Reconfigured the digital software to use the internal sound card for 
TX. Same results as described above (including the noise).
3. Verified the K3 does TX (at least on CW).

I suspect the board with the Line In port may have gone bad, but not sure if 
that’s the issue. If so, is there anything further worth checking or should I 
just replace the board?

Thanks for any guidance!

73 Paula k9ir

Sent from Mail for Windows 10

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KAT500 VSWR Threshold for key interrupt

2019-06-24 Thread Andy Durbin
Elecraft has revised the KAT500 utiity to fix this problem.  VSWR threshold can 
now be set to 1.60 for all bands (but is reported as 1.59 due to rounding 
issues mentioned in the help documentation).  New firmware is available here - 
https://elecraft.com/pages/firmware-software

Thanks Dick.

73,
Andy, k3wyc




The KAT500 utility provides the means to set a VSWR threshold for Key Interrupt 
either by individual band, or the same value for all bands.Selecting ALL, 
entering 1.50 in the Amplifier Key Interrupt box, selecting Apply, results in 
1.50 being set for all bands as expected. After the operation Apply is dim.  
Leaving the Config menu and returning to it still shows 1.50 selected for all 
bands.

If All is reselected, 1.60 entered, and Apply selected then Apply does no go 
dim but the individual bands, and ALL,  each show 1.60. Then select OK and 
Operate.   Then return to Configuration, edit Configuration, VSWR Thresholds.  
With ALL selected Amplifier Key Interrupt is blank.   Inspecting the value for 
each band shows 160 = 1.59 and all other bands 1.50.   The entered value of 
1.60 was not applied.

This anomaly seems repeatable in that 1.50 can be entered, 1.55 can be entered, 
1.80 can be entered,   but 1.60 and 1.56 cannot be.  The sign that that data 
entry has failed is that Apply does not go dim.

Is this a known problem with KAT500 utility 1.16.7.25?

Thanks,
Andy, k3wyc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


Re: [Elecraft] CW decode speed?

2019-06-24 Thread Frank Krozel
OK figured it out.
After decoding signals (first step) then select TEXT DEC (0) then use “B” to 
select WPM CHK.

Pretty cool.

de Frank KG9H

> On Jun 24, 2019, at 6:35 AM, Frank Krozel  wrote:
> 
> Looking for the instructions on how to indicate the speed of a received 
> station on my K3.
> Looked in the K3 manual but cannot find the speed indicator.
> anyone?  de Frank KG9H
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] CW decode speed?

2019-06-24 Thread Frank Krozel
Looking for the instructions on how to indicate the speed of a received station 
on my K3.
Looked in the K3 manual but cannot find the speed indicator.
anyone?  de Frank KG9H

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com