Re: [Elecraft] Firmware final?
FYI - Version 4.51 - The CW Decode/CWT function on my sn# 705 is mostly non-functional no matter what I set the threshold to. I mostly use the CWT for zero beat or to see how far off others are calling (DX) - that still works on the stronger sigs but not on weak ones. -- View this message in context: http://elecraft.365791.n2.nabble.com/Firmware-final-tp7558181p7558412.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 Center Freq save per band
Alan, Thanks for the reply! The static setting will not do what I was interested in. It sets the display for a fixed span and will not display the sigs beyond that setting, even if you tune outside the span. I set my K3 memories for 7.030, 14.030, 21,030, etc. When I select the band, the K3 tunes to that freq but the P3 may center on 14.035 or 14.025 instead of 14.030. I like to tune down the band and see the next 20Khz display which would be 14.000 to 14.020 if the P3 went to 14.030 initially for the center freq. When it goes to 14.035, the next screen does not go to the band edge, it goes to 14.005- Kinda a nuisance for quickly seeing DX on 14.000 to 14.020 quickly. I would think that the P3 would always go back to same center freq when K3 went there but it seems to go +/- 5Khz either way in a somewhat random manner. I am on ver 1.09 FW Thanks anyway 73's Gill -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Center-Freq-save-per-band-tp6949392p6960611.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Center Freq save per band
I am not sure how to set the P3 center frequency in the fixed mode so that it stays put between band changes. I use the M keys + number to select bands. I can save all the band settings using VM key. If I have a span of 20 Khz on the P3, set the center to say 14.30 Mhz, it will not stay saved. Switch band to 3965 Khz and back and it will go to 14.35 Mhz - sometimes but not always. Does the P3 remember settings along with K3?? Gill W4RYW -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Center-Freq-save-per-band-tp6949392p6949392.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Tunable carrier (birdie) 20445khz
While looking for a source of some steady carrier interference on the 20M and 15M bands, I noticed that one of them at 21.017.9 Khz moved (on the P3 screen) in proportion to the tuning of the K3. Obviously a birdie as I checked with no antenna. The birdie had side lobes - i.e. there were weak carriers either side at 12Khz offsets. Tuning around, I found what appears to be the fundamental at 20445.11 kHz. The freq's are with rig on CW normal - the freq's listed change with mode. Turning P3 off makes no difference. I would like to get rid of these or minimize the levels - any ideas? Gill W4RYW -- View this message in context: http://elecraft.365791.n2.nabble.com/Tunable-carrier-birdie-20445khz-tp6706620p6706620.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Tunable carrier (birdie) 20445khz
Thanks for the suggestions guys - for those of you with P3's - tune to 20445.11 on CW nor mode and take a look with the span on the P3 set at 200khz. A regular picket fence of birdies! (at least on my K3) 73 Gill -- View this message in context: http://elecraft.365791.n2.nabble.com/Tunable-carrier-birdie-20445khz-tp6706620p6707083.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Configuration Reset
JayR wrote: Is there a simple way to reset all the configuration parameters to the factory defaults with out going through each item? Jay You can reset everything by the following: Power off Hold in shift knob while pressing power on switch unit it fully powers up You will have to start over again just like you had just finished building it - so don't so this just for grins. If you have an older configuration file saved you can reload it and be right back where you were when you saved the file. The firmware is not affected either way - kinda like a restore point in Win XP. Good luck! Gill -- View this message in context: http://n2.nabble.com/K3-Configuration-Reset-tp4211431p4211553.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 ERR KEY - Continuous Keying
See if you can isolate the problem - Turn off the K3 disconnect the computer from the K3, turn it on and check the config menu setting for PTT-KEY. Turn both PTT and KEY to OFF. Turn off the VOX. Turn off the K3 and reconnect the computer. Turn on K3 then start up computer. You should be ok. If not call Aptos. otherwise go to PTT-KEY menu and turn back on whatever was originally on. If the problem re-appears, then your computer is asserting either the RTS or DTR line continually and now you have to trouble shoot the computer - likely some program or program update is screwed up. All this is assuming that sound card is clean and not activating VOX. If you turn on VOX and it keys again, then you still have a computer soundcard issue. Good Luck Gill W4RYW -- View this message in context: http://n2.nabble.com/K3-ERR-KEY---Continuous-Keying-tp2613602p2614235.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] NR AGC
FW ver 3.06 - audio increases to rock concert levels on s-9 CW signal when NR is switched in. NR is unusable now for me - same on SSB also. Gill hello all, Anyone try this: listening a S7 to S9 signal (SSB) on any band with your headphone, at this time, try to enable NR, you will hear a really LOUD audio! Maybe need firmware upgrade to fix it. 73s David BA4RF __ -- View this message in context: http://n2.nabble.com/NR---AGC-tp2602826p2614280.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 AM reception
I am using an unmodified #705 K3 with the AM filter only. Using amplified computer speakers with RF filtering. The AM BCB/SW sounds as good or better than any I have around the house including an old Hallicrafter SX-100 and two Yaesu's. Better than car AM also. Maybe the problem on some units could be related to power supply hum or switch mode PS hash?? good luck Gill W4RYW -- View this message in context: http://n2.nabble.com/K3-AM-reception-tp2254009p2266791.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 KRX3 Fantastic in ARRL 160 M!
Ed, I agree with your evaluation completely - There is not a more demanding contest for a receiver than the 160M CW. I was BLOWN AWAY by the unbelieveable performance of my K3. I don't have the sub rcvr (yet) but your write up is quite convincing. I am about 100 Mi from the W8JI contest station and I was able to qso very weak stations within 200Hz of Tom's 60 over nine sigs - He was clean as a pin and my 250Hz filter made it like he wasn't there! Amazing! I have a local ham who was running with the legal limit about a mile away and I did not know he was on until I stumbled across him while doing SAP. My old rig would desense and go to pieces when he fired up! You sounded like a local here as well! 73 Gill W4RYW Ed Gray W0SD wrote: How the K3 and KRX3 did in the 160M ARRL Contest: The K3 and KRX3 are amazing radio's and don't let anybody tell you they are not. I read a lot of stuff on here that is based on opinion. This report is based on actually on the air results in the REAL WORLD! IMHO you can place a lot of confidence in reports such as these in making a decision about buying a K3 and KRX3!!! Ed W0SD ___ -- View this message in context: http://n2.nabble.com/K3---KRX3-Fantastic-in-ARRL-160-M%21-tp1631456p1632145.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Strange noise
n4lq wrote: With the antenna disconnected, it disappears. It can be heard in any mode. I can swing the manual notch across the spectrum and it disappears when set to about 360HZ. No antenna no noise - you have something nearby radiating the noise. 360Hz is the 6th harmonic of the AC power line. Put the rig in the AM mode and tune up from the broadcast band looking for peaks in noise. It will likely sound like a buzz on AM, not like what you are hearing but it will be the main source of what you hear. You will probably find some really strong ones in the lower freq ranges - then pick one that is loudest and switch off each breaker in your electrical panel until it goes away - of it does, look for what is connected to that circuit. If it doesn't, you have a noise source outside your home. Good luck. Gill W4RYW -- View this message in context: http://n2.nabble.com/K3-Strange-noise-tp1302286p1308129.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PTT-KEY setting for use with Writelog and DX4WIN
Roger Marrotte-2 wrote: I've been trying different DTR and RTS settings (CONFIG|PTT-KEY) to get PTT and CW to work with a serial port connecting my computer to my K3. In particular I've been trying to get Writelog and DX4WIN to work. I'm using a real serial port and a serial cable with all pins connected. I have my K3 setup with WL ( DX4WIn also) as follows: Port settings screen - COM 4, CW 'checked', DVK 'blank', Rig type K2, poll = yes, com ptt = yes DVK type = windows sound card, all mode ptt on com port RTS = not checked, CW keyer type = PC generates CW PTT subscreen: PTT control= command rig on com port, CW delay = 100MS Rig Vox must be on - set QSK like you want it, No connection to rig from computer except Elecraft serial cable/USB adapter and the sound card in-out cables. Your COM Port will be 1 or 2 if you have a real serial. I am using the USB to serial from Elecraft. 73's Gill -- View this message in context: http://n2.nabble.com/PTT-KEY-setting-for-use-with-Writelog-and-DX4WIN-tp1298883p1299654.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 hearing twotones on CW using narrow DSP settings
Gary, This was discovered and fixed in a later update P am still using 2.10 and it is fixed there. Try the latest. Gill W4RYW Gary Nichols-3 wrote: This has been brought up before but I never noticed it before. If I set 450 hz CW tone and tune in good CW (W1AW broadcast) the 450 hz tone is perfect with DSP bandwidths of 150 hz or greater BUT when going to 100 or 50 hz bandwidth I can hear two tones.450 and 400hz at the same time. At 150 hz BW the 450 is the only one I hear. This phantom tone or additional tone 50 hz lower happens when set to 400 or 350 hz note also. Am I the only one seeing this? K3 716, FW 2.02 Thanks, de gary, kd9sv ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/K3-hearing-twotones-on-CW-using-narrow-DSP-settings-tp834963p835086.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 2.10B narrow filter anomaly
I have been using ver 1.78 that shipped with rig and been quite pleased. Figured I should update.When tuned to a steady tone (CW too!) I now get a beat note effect on the width setting 100hz and 50hz only. I have a 250hz filter. Turn on IIR fixes problem. Only hear on FIR DSP. Sounds like two identical freq tones beating - tuning the sig to a precise freq causes effect to disappear. This is annoying to listen to. SN#707 Gill W4RYW -- View this message in context: http://www.nabble.com/2.10B-narrow-filter-anomaly-tp18171265p18171265.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 2.10B narrow filter anomaly
Bob, Thanks for the confirmation. I have spectrum lab - will take a look after FD. I also think the level drops several db (to the ear) as the filter switches from 150hz to 100hz, most noticable on weaker sigs. 73's Gill You may be on to something. Using the 100 Hz FIR filter and injecting a steady carrier, I looked at the receiver output using Spectrum Lab. I observed multiple spurious tones, 2 of which are only 15 dB down from the desired signal. The freq spread between the desired signal and the 1st spur is 2x the difference between the signal and filter center, so you have zero beat at filter center. And so on. Take a look at it with an audio spectrum analyzer, it's interesting. Zero beat with the other -15 dB spur is at the upper filter skirt. Aliasing? The result is the same for the 50 Hz filter, but the 50 and 100 Hz IIR filters are squeaky clean under the same conditions. Subjectively speaking, when listening to on air signals, the signal starts to sound bad to my ears as you tune it close to the upper filter edge zero beat point, but within 20 Hz of filter center the effect seems subtle, and easily overlooked. However, viewed on the spec an, it's clear that something isn't quite right. I observe no such problem with ver 1.78 FIR filters under the same conditions. Maybe someone else can take a look at this. Bob NW8L -- View this message in context: http://www.nabble.com/2.10B-narrow-filter-anomaly-tp18171265p18176510.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: band-bitch
I spent about 15 Min programming my bands into the #1-10 keys and the 3 modes on each band (CW, SSB, PSK) into the M1=M3 keys. I set my first favorite freq in VFO A, second in VFO B for each M# key for that band. I can go where I want with proper mode/filter/antenna/whatever I like!! in about 2 seconds. Where is the problem?? It is a poor workman that blames his tools! Gill DOUGLAS ZWIEBEL wrote: My oh my. What is so hard about changing bands on the K3? You can use the memories in any of the various setups posted here. Any of them take just a couple seconds...some only 1 second. Even being a contester where time counts, I just can't see what is so urgent about a band switch keypad ala the other rigs. Is this really such a big deal? de Doug KR2Q ___ -- View this message in context: http://www.nabble.com/K3%3A-band-bitch-tp17535200p17548635.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 + WRITELOG CW - LPT PORT
I have my K3 setup with WL as follows: Port settings screen - COM 4, CW 'checked', DVK 'blank', Rig type K2, poll = yes, com ptt = yes DVK type = windows sound card, all mode ptt on com port RTS = not checked, CW keyer type = PC generates CW PTT subscreen: PTT control= command rig on com port, CW delay = 100MS Rig Vox must be on - set QSK like you want it, No connection to rig from computer except Elecraft serial cable/USB adapter and the sound card in-out cables. 73's Gill Works like a bank full of Euros (which us americans wish we had instead of a bank full of dollars!) py5eg wrote: Dear friends: I would like to use the K3 for the first time CW with the writelog. If some of the users already worked on that I would like to have some help. 1) I will use the LPT1 to send CW 2) Writelog software 3) How to configure the K3 and the writelog for this rig. Thanks in advance Oms PY5EG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://www.nabble.com/K3-%2B-WRITELOG--CW---LPT-PORT-tp17426822p17430117.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Filter width and cutting off CW
Make sure the shift is normal (press shift till you get Norm). Make sure you have gain set for narrow filters in config menu pa 43 of manual. Make sure narrow filter is set for cw receive (enabled). Make sure freq offset is set correctly. All this stuff is on pa 43 of manual. I have 500 hz and 250 hz filters and they work great! Good luck! Gill -- View this message in context: http://www.nabble.com/Filter-width-and-cutting-off-CW-tp17350104p17353908.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Dayton and FDIM---More
Dave, Thanks for taking time to write an interesting report for those of us who wish we were there! Gill ARCI #11246 -- View this message in context: http://www.nabble.com/Dayton-and-FDIM---More-tp17308267p17309440.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 KPA3 not working(?)
John, Go to the config KPA3 menu and keep on dialing past the KPIO stuff - Set PA nor Gill John H Gibson wrote: I am trying to put my new K3/100 SN 820 on the air for the first time, and I am having a power output problem. The KPA3 is installed, I hope correctly, but I cannot adjust the output power above 12 watts. The radio behaves as if the KPA3 was not installed. I do have CONFIG: PAIO set to NOR. (What does the TEST setting do?) Can anyone suggest what I may have overlooked or done wrong? Thank you. 73, John, no8v ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://www.nabble.com/K3-KPA3-not-working%28-%29-tp17168581p17168604.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Push one primary control button and the rest move inward!
I have no movement here either (#705). I did the mod for the mic grounding which required removal of the front panel, the bottom and one side. I made sure proper spacers with proper type lockwashers were in the right places while I was at it. My unit is a marvel of machining technology - top cover, bottom cover and sides fit perfectly - even after removal and reassembly. I have never had that occur with my Icoms or Yaesu's - always had to fit force to get re-alignment on re-assembly. -- View this message in context: http://www.nabble.com/Push-one-primary-control-button-and-the-rest-move-inward%21-tp17067011p17071514.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Knob shaft and pot issues
The four small controls are digital encoders - not pots. they have some play because they are also pushbutton type switches. The encoders have the click built in to allow the operator to fine tune the digital steps. The $20,000 Agilent test equipment we use at work have the same pots. My unit had a broken L18 coil lead on the KBPF3 board which I re-soldered. The Mic ckt board (front panel)needed a mod. I have plenty of hardware left over, probably because each extra option I ordered came with extras. I like this radio better than any I have owned so far (licensed in 1960). I hope you can get the things resolved that are bugging you - it seems that the company is working hard to please. This is my first Elecraft product purchase. -- View this message in context: http://www.nabble.com/Knob-shaft-and-pot-issues-tp17066356p17071522.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] S/N 705 on the air!
Ordered 10/23/07 - delivered 4/17/08 - assembled in about 8 hrs total with only two glitches - coil L-18 on KPB3 board had broken lead and speaker sound badly distorted. Good service response though from Scott. I'm just a poor dumb country boy and never owned a Cadillac before - NICE! Gill -- View this message in context: http://www.nabble.com/S-N-705-on-the-air%21-tp16907807p16907807.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Another Katiegram
Wonderful news - my order of Oct 23 will ship in 2-3 weeks. I was actually expecting a late May delivery after lurking about this list for the last several months. Gill W4RYW -- View this message in context: http://www.nabble.com/Another-Katiegram-tp16599289p16599289.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
