[Elecraft] FOR SALE: Elecraft KFL3A-1.0K Filter

[RVZ via Elecraft]

Selling an Elecraft KFL3A-1.0K 1khz filter for K3/K3S in like new condition.  
$100 PayPal Prepaid US. 73, Dick- K9OM (r...@aol.com)
  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: P3 Panadapter with SVGA and TX Monitor

[David Needham]

Selling my single owner, loaded P3. It comes from a non-smoking home and is
in excellent condition.



P3, Panadapter for K3, #46XX, which includes the following options:

- P3SVGA, P3 VGA SVGA Video/FFT Adapter

- P3TXMON, Transmit Monitor Option for P3

- DCHF-2000, Coupler, 1.8-54 MHz, 1-2000 W

- Original manual



Price: $950 with free shipping. I will pay 100% of the cost for shipping
and insurance to the US lower 48 states.



Pictures emailed on request.



Please contact me off list at AA4VT dot Dave at gmail dot com
--
Thank you!
David Needham, AA4VT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale : Loaded Single Owner K3S with Second Receiver

[David Needham]

Selling my single owner loaded, dual receiver K3S/100. This is a genuine
K3S, not an upgraded K3. It comes from a non-smoking home and is in
excellent condition.



K3S/100 #113xx includes the following installed options:

- KRX3A, K3 2nd RX Module

- KAT3A, ATU for K3S

- KTCX03-1, K3 TCXO 1 ppm

- KBPF3A General-Coverage RX Filter Module

- KDVR3, Digital Voice Recorder

- MH2, Electret Hand Microphone

- All the latest firmware updates



Main Receiver filters:

- 6 kHz, 8 pole AM/ESSB filter

- 2.8 kHz 8 pole SSB filter

- 2.1 kHz, 8 pole SSB filter

- 500 Hz, 8 pole CW filter

- 250 Hz, 8 pole CW filter



Sub Receiver filters:

- 2.8 kHz 8 pole SSB filter

- 2.1 kHz, 8 pole SSB filter

- 500 Hz, 8 pole CW filter

- 250 Hz, 8 pole CW filter



Pictures emailed on request.



Price: $3,900 with free shipping. I will pay 100% of the cost for shipping
and insurance to the US lower 48 states.



Please contact me off list at AA4VT dot Dave at gmail dot com

-- 
Thank you!
David Needham, AA4VT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Single Owner K3S, P3-SVGA-TXMON, KPOD

[David Needham]

I am selling my single owner loaded, dual receiver K3S/100. This is a
genuine K3S, not an upgraded K3. It comes from a non-smoking home and is in
excellent condition. Pictures available upon request.



Includes the following:



- K3S/100 #113xx includes the following installed options:

- KAT3A, ATU for K3S

- KTCX03-1, K3 TCXO 1 ppm

- KBPF3A General-Coverage RX Filter Module

- KDVR3, Digital Voice Recorder

- KRX3A, K3 2nd RX Module

- KFL3A-2.8_2.7sw, 2.8 for 2.7 khz swap (x2)



Filters in Main Receiver:

- 6 kHz, 8 pole AM/ESSB filter (Inrad #710L)

- 2.8 kHz 8 pole SSB filter

- 2.1 kHz, 8 pole SSB filter (Inrad #709L)

- 500 Hz, 8 pole CW filter (Inrad #728L)

- 250 Hz, 8 pole CW filter (Inrad #708L)



Filters in Sub Receiver:

- 2.8 kHz 8 pole SSB filter

- 2.1 kHz, 8 pole SSB filter (Inrad #709L)

- 500 Hz, 8 pole CW filter (Inrad #728L)

- 250 Hz, 8 pole CW filter (Inrad #708L)



Includes MH2, Electret Hand Microphone



Includes all of the latest firmware:

MCU 05.67

FPF 01.26

DSP1 02.88

DSP2 02.88

DVR 01.03



K3S Price: $3,990 which includes me paying 50% of the cost for shipping and
insurance to the lower 48 states.



Also for sale:

P3, Panadapter for K3, #46XX, which includes the following options:

- P3SVGA, P3 Video/FFT Adapter

- P3TXMON, Transmit Monitor Option for P3

- DCHF-2000, Coupler, 1.8-54 MHz, 1-2000 W



P3/SVGA/TX Mon Price: $900 which includes me paying 50% of the cost for
shipping and insurance to the US lower 48 states.



K-Pod and flat cable for K3 in like new condition, with new KPOD Aux cable.
$325.00, which includes me paying 100% of the cost for shipping and
insurance to the lower 48 states.



Please contact me off list at AA4VT dot Dave at gmail dot com
-- 
Thank you!
David Needham, AA4VT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft K1 and KX1 with accessories

[Jan-Michael Wyckoff]

For Sale:
Elecraft K1 S/N: 34xx, K1 Upgrade Kit, KNB1, KAT1, KBT1, KFL1-2 (80 and 40), 
KFL1-2 (20 and 30), K1BLTXT-X w/o LCD
Elecraft KX1 S/N: 29xx, KXAT1 (20 and 40), KXB3080, KXPD1, KBT1
All in original Factory boxes, unassembled, unmolested.
Price: $3000.00 cash only.

Pick up only. Will not ship.
No negotiations, no shipping, will not split up.
Jan-Michael Wyckoff
KA9FSM
jmwyck...@att.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For sale: K3s and P3 panadapter

[Nicklas Johnson]

Because I'm so happy with my K4 and now need to make some room in the
shack, I'm selling my K3s and P3.

K3s is the 100W version, has the auto-tuner, 2.7kHz SSB filter, K144XV 2m
transverter (without reference lock board), KFL3B-FM filter, and KBPF3
modified general-coverage board.  I can't say for certain whether the KBPF3
works as I never got around to setting up a proper antenna for it.  Power
cable, manual, original box, and Fred Cady - KE7X's K3s+P3 book.

P3 is the basic panadapter with no extras (ie, no keyboard or display).
Interconnects, manual, original box.

Both come from a smoke-free home and have been used very gently.

More details and pictures on QRZ:
https://forums.qrz.com/index.php?threads/elecraft-k3s.908282/
https://forums.qrz.com/index.php?threads/elecraft-p3-panadapter.908284/

Asking $2600 for the K3s and $600 for the P3, but will entertain a discount
if someone wants to take both.  Price includes shipping and escrow fees.

Please reply to me directly/off-list if you have any questions.

Nick / N6OL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: K3s and P3

[n5zm n5zm . net]

K3s is Sold pending payment. Thanks to all for your interest.

Earl N5ZM..
--


On 3/16/2024 9:08 AM, n5zm n5zm.net wrote:

P3 has been sold. Thanks for all your interest.


On 3/15/2024 7:21 PM, n5zm n5zm.net wrote:

For Sale is my K3s, Serial # 103##, in excellent working and good cosmetic 
condition.  Couple of minor scuffs on top cover.  Non-smoking and pet free 
environment. It was retired,  after working both Bouvet and Crozet,  when I put 
my K4D in service last year. 

This is a  (factory assembled) unit including insertion and calibration of all 
ten filters, also including the KPOD  Power Mod.  This K3s is fully loaded (has 
all options except no 2M) and  contains the following:
A..   KPA-3 100W PA upgrade
B..   KAT3A ATU
C..   KTCXO3-1 XCO
D..   KBPF3A General Coverage Rx Module
E..   KDVR3 Digital Voice Recorder
F..   KRX3A 2nd Receiver
G..   Filters – 2.8KHz, 1500Hz, 700Hz, 400Hz, 200Hz – identical filters in 
main and sub-receiver – the 200Hz pair is factory-matched 5-pole, while  all 
the rest are 8-pole filters (the 700 Hz filters are special order INRAD matched 
filters).

Comes with original power cable, manual (Also Cady K3 Manual) and original box.
$2,995, plus shipping.

Also For Sale, the matching P3 Panadapter. Cables and Manual included and 
original box. No extras in this unit. $500. If purchased with the K3s total 
price plus shipping $3395.

Because of the times all sales are final.

Earl N5ZM.. (QRZ info is good)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to 
n...@n5zm.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n5zm.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: K3s and P3

[n5zm n5zm . net]

P3 has been sold. Thanks for all your interest.


On 3/15/2024 7:21 PM, n5zm n5zm.net wrote:

For Sale is my K3s, Serial # 103##, in excellent working and good cosmetic 
condition.  Couple of minor scuffs on top cover.  Non-smoking and pet free 
environment. It was retired,  after working both Bouvet and Crozet,  when I put 
my K4D in service last year. 

This is a  (factory assembled) unit including insertion and calibration of all 
ten filters, also including the KPOD  Power Mod.  This K3s is fully loaded (has 
all options except no 2M) and  contains the following:
A..   KPA-3 100W PA upgrade
B..   KAT3A ATU
C..   KTCXO3-1 XCO
D..   KBPF3A General Coverage Rx Module
E..   KDVR3 Digital Voice Recorder
F..   KRX3A 2nd Receiver
G..   Filters – 2.8KHz, 1500Hz, 700Hz, 400Hz, 200Hz – identical filters in 
main and sub-receiver – the 200Hz pair is factory-matched 5-pole, while  all 
the rest are 8-pole filters (the 700 Hz filters are special order INRAD matched 
filters).

Comes with original power cable, manual (Also Cady K3 Manual) and original box.
$2,995, plus shipping.

Also For Sale, the matching P3 Panadapter. Cables and Manual included and 
original box. No extras in this unit. $500. If purchased with the K3s total 
price plus shipping $3395.

Because of the times all sales are final.

Earl N5ZM.. (QRZ info is good)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n5zm.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: K3s and P3

[n5zm n5zm . net]

For Sale is my K3s, Serial # 103##, in excellent working and good cosmetic 
condition.  Couple of minor scuffs on top cover.  Non-smoking and pet free 
environment. It was retired,  after working both Bouvet and Crozet,  when I put 
my K4D in service last year. 

This is a  (factory assembled) unit including insertion and calibration of all 
ten filters, also including the KPOD  Power Mod.  This K3s is fully loaded (has 
all options except no 2M) and  contains the following:
A..   KPA-3 100W PA upgrade
B..   KAT3A ATU
C..   KTCXO3-1 XCO
D..   KBPF3A General Coverage Rx Module
E..   KDVR3 Digital Voice Recorder
F..   KRX3A 2nd Receiver
G..   Filters – 2.8KHz, 1500Hz, 700Hz, 400Hz, 200Hz – identical filters in 
main and sub-receiver – the 200Hz pair is factory-matched 5-pole, while  all 
the rest are 8-pole filters (the 700 Hz filters are special order INRAD matched 
filters).

Comes with original power cable, manual (Also Cady K3 Manual) and original box.
$2,995, plus shipping.

Also For Sale, the matching P3 Panadapter. Cables and Manual included and 
original box. No extras in this unit. $500. If purchased with the K3s total 
price plus shipping $3395.

Because of the times all sales are final.

Earl N5ZM.. (QRZ info is good)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft MH2 microphone for K2 - And W2 to P3 Data-link cable

[Doug Hensley]

The Fred Cady book is sold as well as both KXUSB cables.

Still available is:

1.  a new MH2 mic for the K2.  $79.95 + $8 shipping (+5% pp if used);
2.  A new W2 to P3 cat 5/6 data-link cable, $24.95 + $4 shipping (+5% pp if 
used);

QSL if interested.

73, Doug W5JV


Sent from my iPhone

On Mar 14, 2024, at 2:09 PM, Doug Hensley  wrote:


For sale here before I move it to other venues, is my like new
copy of Prof. Fred Cady's 327 page exhaustive 2017 reference
entitled:

"The Elecraft K3s and P3 (Getting the most from Your High
Performance Station)"

$59.95 plus shipping plus 5% if you want to use PAYPAL'
Contact me for my PAYPAL account name.  Shipping is $8

OR

Simple check or m.o to my QTH address listed on my QRZ page.

QSL if interested.

73, Doug W5JV






Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Late Edition of Fred Cady's K3s & P3 Book - As New

[Doug Hensley]

For sale here before I move it to other venues, is my like new
copy of Prof. Fred Cady's 327 page exhaustive 2017 reference
entitled:

"The Elecraft K3s and P3 (Getting the most from Your High
Performance Station)"

$59.95 plus shipping plus 5% if you want to use PAYPAL'
Contact me for my PAYPAL account name.  Shipping is $8

OR

Simple check or m.o to my QTH address listed on my QRZ page.

QSL if interested.

73, Doug W5JV






Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: New Elecraft KX3 USB Cable "KXUSB"

[Doug Hensley]

I forgot to say price is for one (1) KXUSB cable.

73, Doug W5JV

Sent from my iPhone

On Mar 10, 2024, at 3:27 PM, Doug Hensley  wrote:


I have two new Elecraft KXUSB cables for the KX3.  They are the
USB RS232 TO 3.5MM CABLE
The KXUSB cable plugs into the common USB port on a computer
and creates a virtual COM port, when the appropriate drivers are
also installed on the computer.

Price: $34 plus $5 shipping. Payment by check, money order or PP + 5%.
These are new unused Elecraft cables.

QSL if interested.

73, Doug W5JV





Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Noktua fans for K3s

[Doug Hensley]

Awhile back when the K3s was the talk of the day, a few
K3s owners experimented with fans to reduce the noise
from the factory fans running.

One of the fans which was praised was the Noctua NF-A6x25 

FLX Premium a Quiet 60 mm Fan 

 with a 3 pin connector.  The
fan took some effort to install but the results as I recall were
hailed as a great improvement.

All to say, I have two spare NIB Noctua NF-A6x25 fans and will
sell both as a pair for 39.95 plus 9.00 shipping.

Just have two to spare so QSL if interested.

Payment by check, money order or PP + 5%.

73, Doug W5JV





Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: New Elecraft KX3 USB Cable "KXUSB"

[Doug Hensley]

I have two new Elecraft KXUSB cables for the KX3.  They are the
USB RS232 TO 3.5MM CABLE
The KXUSB cable plugs into the common USB port on a computer
and creates a virtual COM port, when the appropriate drivers are
also installed on the computer.

Price: $34 plus $5 shipping. Payment by check, money order or PP + 5%.
These are new unused Elecraft cables.

QSL if interested.

73, Doug W5JV





Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] SOLD------SALE- KX3 Side KX and ES80 carrying case.

[ken057581]

SoldThanks all.Ken

Hi all,
Have the following items for sale as extras from a previous purchase.
Ideally, would like to send both to one location. $10.00 off for purchasing 
both.

>Gems Products Side KX; End Plates and Protective Plastic Cover for the KX3.
$55.00 shipped, CONUS only.

> KX3, ES80 carrying case. This case is large enough to hold the KX3, PX3 and 
> accessories. In like new condition.
$55.00 shipped. CONUS only.

Photos on request. Also available on the Side KX and Elecraft web sites.
All sales final.
PayPal Friends & Family, Zelle, Cleared Personal Check, Postal Money Order, 
Bank Cashier's Check are all ok.
Thanks, Ken, W2GIW.
ken057...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale K-POD $350 plus shipping. New in box. Selling due to QTH relocation. Contact off list for questions, photos, shipping, pickup/delivery, phone call, etc. Thank you. 73, Jim WI6X

[WI6X Jim]

For Sale K-POD $350 plus shipping. New in box.
Selling due to QTH relocation.
Contact off list for questions, photos, shipping, pickup/delivery, phone call, 
etc.  
Thank you.
73,
Jim WI6X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale K-POD $350 plus shipping. New in box. Selling due to QTH relocation. Contact off list for questions, photos, shipping, pickup/delivery, phone call, etc. Thank you. 73, Jim WI6X

[James Dahl]

For Sale K-POD $350 plus shipping. New in box. 
Selling due to QTH relocation.
Contact off list for questions, photos, shipping, pickup/delivery, phone call, 
etc.  
Thank you. 
73, 
Jim WI6X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale K4D with KAT4 ATU asking $5, 700 plus shipping. For Sale K4D with KAT4 Auto-Tuner asking $5, 700 plus shipping. Excellent condition. Original owner. Original shipping boxes. Sellin

[WI6X Jim]

For Sale K4D with KAT4 Auto-Tuner asking $5,700 plus shipping.
Excellent condition.
Original owner.
Original shipping boxes.
Selling due to QTH relocation.
Contact off list for questions, photos, shipping, pickup/delivery, phone call, 
etc.
Thank you.
73,
Jim WI6X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale KPA1500 asking $6, 700 plus shipping. New in 2023. Excellent condition. Original owner. Original shipping boxes. Selling due to QTH relocation. Contact off list for questions, phot

[James Dahl]

For Sale KPA1500 asking $6,700 plus shipping.
New in 2023.
Excellent condition.
Original owner.
Original shipping boxes.
Selling due to QTH relocation.
Contact off list for questions, photos, shipping, pickup/delivery, phone call, 
etc.
Thank you.
73,
Jim WI6X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale PX3-K

[Mike Maloney]

I have complete PX3-K as packaged by Elecraft for sale.  Panadapter kit for the 
KX3.   Asking $560 ppd CONUS.    Contact off list.
73, Mike AC5P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale KPA3 100W amp - still available!

[K5RHD Randy Diddel]

Hello everyone,

Are you the owner of a K3/10 and finally want more power? I have a perfectly 
good KPA3 100 W internal amp for sale. It came out of a working K3 with a 
Serial Number 456x. I am using the K3 as an IF for VHF and up use. All mounting 
hardware is included. You cannot currently get this option from Elecraft. I can 
provide a picture and take PayPal (split fee 50/50) or Venmo. Asking 685.00 
shipped.
73
K5RHD
/randy
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale KX3/PX3 Packtenna 9:1 antenna iPortable iP60z antenna analyzer Gem Products

[Greg Herman]

I think I forgot to add my email

kc9...@gmail.com

For sale
KX3/PX3, packtenna 9:1, iP60z, gem products and more

Email me if interested for pictures and details

Have a Great day!
Greg
KC9NRO


On Sun, Nov 19, 2023 at 17:24  wrote:

> Send Elecraft mailing list submissions to
> elecraft@mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-requ...@mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-ow...@mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
>1. Re: Dumb question about KAT-500 Manual (Dick Dievendorff)
>2. Dumb question about KAT-500 Manual (Andy Durbin)
>3. Re: Dumb question about KAT-500 Manual (Tom N4LSJ)
>4. W2 Watt Meter firmware load? (Glenn Maclean)
>5. Kpod not Working on K3 (sem...@semaos.plus.com)
>6. Re: Kpod not Working on K3 (Ed Parish)
>7. K3 Resistor Values (sem...@semaos.plus.com)
>8. Re: K3 Resistor Values (Paul Van Dyke)
>9. Elecraft K1 for sale (Frank Krozel)
>   10. Re: K3 Resistor Values (George Danner)
>   11. Re: K3 Resistor Values (M Cresap)
>   12. FS: KAT500 (m...@k2qo.us)
>   13. Re: K3 Resistor Values (Jim Brown)
>   14. KX3/PX3, PACKTENNA 9:1, iPz60 for sale (Greg Herman)
>   15. KPA-1500 on 160 (Pete Smith N4ZR)
>   16. Re: KPA-1500 on 160 (Dick Dievendorff)
>   17. Re: KPA-1500 on 160 (Bill Johnson)
>   18. Re: KPA-1500 on 160 (Pete Smith N4ZR)
>   19. Elecraft CW Net Announcement (kevin)
>   20. KH1 keyer paddle spring to be changed; replacement paddles to
>   be shipped to all affected users (Wayne Burdick)
>   21. Elecraft 80M SSB Net Announcement (Dave New, N8SBE)
>   22. KAT500? (W2HX)
>
>
> --
>
> Message: 1
> Date: Tue, 14 Nov 2023 15:54:25 -0800
> From: Dick Dievendorff 
> To: n4...@qsl.net
> Cc: Elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Dumb question about KAT-500 Manual
> Message-ID: <2d72aa5c-acac-455d-8015-901728b5e...@elecraft.com>
> Content-Type: text/plain; charset=utf-8
>
> It?s not a stupid question.
>
> The two RCA connections are interchangeable.  There is just a relay
> between them that is opened to interrupt the amp key line.  No other
> connections. It doesn?t matter which of the connectors is connected to the
> exciter or amp.
>
> 73 de Dick, K6KR
>
> > On Nov 14, 2023, at 15:51, Tom N4LSJ  wrote:
> >
> > ?I'm going thru the KAT-500 manual (Rev D1) and on several pages it
> shows key line connections.  In all of them that use the RCA plug key line
> connections to the KPA-500, it shows the bottom (white) jack on the KAT
> going to the PA KEY on the amp and the rig's "send" line going to the top
> jack on the KAT.  EXCEPT: Page 15.  It has the jacks on the KAT reversed.
> Is that intentional?  If so, why is it reversed only for the Icom?  Also, I
> couldn't find any errata on this on the elecraft site.  Does one exist if
> it's an error?
> >
> > Sorry if this is a stupid question.
> >
> > Thanks
> >
> > Tom N4LSJ
> >
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to d...@elecraft.com
>
>
> --
>
> Message: 2
> Date: Wed, 15 Nov 2023 00:02:28 +
> From: Andy Durbin 
> To: "elecraft@mailman.qth.net" 
> Subject: [Elecraft] Dumb question about KAT-500 Manual
> Message-ID:
> <
> dm4pr10mb67913251ef6974fdf06ff0b58c...@dm4pr10mb6791.namprd10.prod.outlook.com
> >
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> KAT500 Key In and Key Out RCA jacks are linked by a relay contact but
> connect to nothing else.  It doesn't make any difference which is In and
> which is Out, but I agree the documentation should be consistent.
>
> Andy, k3wyc
>
>
> --
>
> Message: 3
> Date: Wed, 15 Nov 2023 02:52:13 +
> From: Tom N4LSJ 
> To: Elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Dumb question about KAT-500 Manual
> Message-ID:
> <
> 0101018bd0e4

[Elecraft] For Sale: KPA3 100 W internal amp

[K5RHD Randy Diddel]

Pulled from a working K3. I am going to use the K3 as a VHF/UHF+ IF with 
tansverters and do not use the radio's HF portion. All hardware included. 
Installation instructions are on Elecraft's site. The radio's serial number is 
4565 for reference. Please email me with any questions. If you have a K3/10 and 
have wanted a PA, this is your chance. Asking $700 shipped. PayPal or Venmo is 
preferred. Contact me off the list for pictures and payment info.
I also have a KFL3-200 200 hx CW filter from that same radio for $50.00 shipped 
if anyone is in need.
73
K5RHD
/randy

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For sale, KPA1500

[Rick Stealey]

KPA1500, for pickup in NJ. $5,050.   See details on my qth.com ad.  Posted 
Saturday 11/11/23 at 2015Z
Please do not reply here or use my hotmail address, as emails get lost among 
all the postings and I do not see them. rickstea...@icloud.com
73
Rick  K2XT

repeat, use icloud, not hotmail email.  Tnx

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft 500W Power Combo

[mark]

Gang,

I'm parting with my KPA500 / KAT500 combo. Was new from Elecraft in February 
2021. Both units work perfectly and are cosmetically excellent. Includes 
original manuals, 120V power cable and fuses, 1x KXSER (E850463), tuner power 
cable, NEMA 6-15P power cable (the one I used), Key Line cable, Computer 
interface cable for tuner, Enhanced Mode Aux Cable set for KPA500 + second 
E850463 aux cable for KAT500. AUX Cable Set incl: 15-Pin to 15-Pin DE-15 + Key 
Line Interrupter adapter.

I'm simplifying my shack and “upgrading" to a KW. If the package does not sell 
in a reasonable time I'll consider splitting the items. Email me for photos.

The asking price is $3100 and will be shipped in original Elecraft packaging 
via UPS with insurance. Or save $150 with local pickup anywhere between Erie, 
PA and Rochester, NY if it is not snowing!

Payment options are PayPal, cash and USPS money order. I’ve been battling to 
get Zelle setup…

73, Mark Adams K2QO
FN03ra

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE: Elecraft K3s/100 Dual Receiver/Transceiver #106xx

[Clay Autery]

All the details are on my QRZ listing:

https://forums.qrz.com/index.php?threads/elecraft-k3s-100-dual-receiver-transceiver-10643-more.887926/

$3500.00 SHIPPED!!  (lower 48, rest of world is at my cost)

Limited time, price lowered, shipping thrown in.

Perfect Christmas gift...

 73,

--
Clay E. Autery, Jr.
KY5G

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE- K3: Correction

[RVZ via Elecraft]

Regarding the K3 I recently advertised: correction- the radio doesn't have the 
Antenna Tuner.  I apologize for the mistake, senior moment here.  It does have 
the optional 200hz CW filter, and optional Hand Mic. The radios in great 
condition!  Price is $895.  73, Dick- K9OM (r...@aol.com) 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE- K3 w/Antenna Tuner

[RVZ via Elecraft]

Selling a real nice K3-100 with Antenna Tuner, 2.7khz SSB filter, 200hz CW 
filter, and Hand Mic.  Serial #4565 with gold pins.  Always in a smoke free 
environment. $895 via PayPal.  73, Dick- K9OM  (r...@aol.com)     
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For sale - KPA1500 in NJ

[Rick Stealey]

KPA1500 available in central NJ.  This will be a pickup only.  About a one hour 
drive from the NYC, Phila or NNJ areas, or 1.5 hrs from JFK area of LI.  The 
amp is as mint as could possibly be.  Probably transmit time no more than 15 
min. total.  Ser # high 500's.  Must be a pickup but I will demo it for you.  
$5500.
Use k...@arrl.net or 609-752-6705. I have convincing pics to easily send you.
Rick  K2XT73
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For sale: Amplifier Cables

[phil-z]

The cables have been sold.

Thanks,

Phil N3ZP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Amplifier Cables

[phil-z]

Full set of Elecraft control cables to connect FLEX 6000 series radios to 
Elecraft KPA500 Amp and KAT500 combo. Allows for automatic band selection to 
follow radio. May also work with other radios. Picture available.

Includes:
KXUSB USB to 3.5 mm TRS 
KUSB USB to 9-pin male serial cable
USB to 9-pin male serial cable
Null modem
Price $45 shipped CONUS. PayPal or Postal Money Order

Phil N3ZP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: Complete K3s setup

[Michael Gillen via Elecraft]

SOLD!

> On Sep 16, 2023, at 6:40 PM, Michael Gillen  wrote:
> 
> Sale pending.
> 
>> On Sep 16, 2023, at 5:23 PM, Michael Gillen via Elecraft 
>>  wrote:
>> 
>> Hello,
>> 
>> For sale is my elecraft K3s station setup including K3s, KPA500, KAT500, and 
>> P3. Smoke free adult owned no contesting.
>> 
>> I am the original owner of the K3s serial number 11636:
>> K3s "Casual Package" 100w internal amp, internal antenna tuner, 2.7 KHz 
>> filter, MH-4 hand mic
>> Added 2.1 KHz filter, 400Hz filter
>> Added DVR and General Coverage boards.
>> 
>> I am the original owner of the P3:
>> P3 standard; no VGA, no TX monitor
>> 
>> KPA500 + KAT500 purchased used
>> 
>> Includes all cables, Fred Cady book and original Elecraft manuals. Just add 
>> your 12v power supply and an antenna.
>> 
>> Pictures available upon request.
>> Please contact me though my email address on QRZ.
>> 
>> Asking $5500 shipped CONUS from San Diego, CA area zip code 92075
>> Personal check or PayPal
>> 
>> If not sold in a few days I will split up the set.
>> 
>> 73,
>> Michael
>> KK6RWK
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to mjgil...@yahoo.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: Complete K3s setup

[Michael Gillen via Elecraft]

Sale pending.

> On Sep 16, 2023, at 5:23 PM, Michael Gillen via Elecraft 
>  wrote:
> 
> Hello,
> 
> For sale is my elecraft K3s station setup including K3s, KPA500, KAT500, and 
> P3. Smoke free adult owned no contesting.
> 
> I am the original owner of the K3s serial number 11636:
> K3s "Casual Package" 100w internal amp, internal antenna tuner, 2.7 KHz 
> filter, MH-4 hand mic
> Added 2.1 KHz filter, 400Hz filter
> Added DVR and General Coverage boards.
> 
> I am the original owner of the P3:
> P3 standard; no VGA, no TX monitor
> 
> KPA500 + KAT500 purchased used
> 
> Includes all cables, Fred Cady book and original Elecraft manuals. Just add 
> your 12v power supply and an antenna.
> 
> Pictures available upon request.
> Please contact me though my email address on QRZ.
> 
> Asking $5500 shipped CONUS from San Diego, CA area zip code 92075
> Personal check or PayPal
> 
> If not sold in a few days I will split up the set.
> 
> 73,
> Michael
> KK6RWK
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mjgil...@yahoo.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Complete K3s setup

[Michael Gillen via Elecraft]

Hello,

For sale is my elecraft K3s station setup including K3s, KPA500, KAT500, and 
P3. Smoke free adult owned no contesting.

I am the original owner of the K3s serial number 11636:
K3s "Casual Package" 100w internal amp, internal antenna tuner, 2.7 KHz filter, 
MH-4 hand mic
Added 2.1 KHz filter, 400Hz filter
Added DVR and General Coverage boards.
 
I am the original owner of the P3:
P3 standard; no VGA, no TX monitor
 
KPA500 + KAT500 purchased used
 
Includes all cables, Fred Cady book and original Elecraft manuals. Just add 
your 12v power supply and an antenna.

Pictures available upon request.
Please contact me though my email address on QRZ.

Asking $5500 shipped CONUS from San Diego, CA area zip code 92075
Personal check or PayPal

If not sold in a few days I will split up the set.

73,
Michael
KK6RWK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE: KBPF3A GENERAL COVERAGE RECEIVE OPTION, 1 each

[Clay Autery]

*KBPF3A General Coverage Receive (module plus extras), 1 each* 
 *$199.95 + Shipping* (world-wide)


Shipping + Full purchase price insurance, carrier of my  choice, but 
will consider recommendations.


_*Payment *__(in order of preference):__
_
*1)**Zelle */(Net, no fees)/ - /I will send you a request/ from my 
bank.  I need your a) Zelle phone number or email address, and the EXACT 
listing of your name on your Zelle account.  :)
2) PayPal (only if buyer agrees to pay 100% of PP fees), fee extra 
beyond shipping to cover PayPal transaction fees, and in the case of 
foreign purchase, currency transaction fees, etc..

3) Certified Funds - Bank cashiers check, USPS Money Order, etc.

I have one guy at the plate, but the clock is ticking and I'm not sure 
he has the stick to knock it out!  


*Who wants the on-deck spot?*  

73,

--
Clay E. Autery, Jr.
KY5G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] FOR SALE: K2

[Gwen Patton]

I lived in an apartment complex, and ran HF, VHF, and UHF. I had to be
stealthy about it, but I made it work. We were on the 3rd floor, with a
balcony facing a parking lot that had a copse of trees behind it. I could
attach a fishing sinker to the end of a piece of magnet wire and shoot it
into the trees. Then I used a random wire tuner to operate HF. I got a
bunch of contacts in Western Europe. Some were in the UK, and many were in
Ireland. Nobody was the wiser. For the local 2m repeater I tried a copper
J-Pole, sprayed with a textured fleck paint that matched the brick facade
of the building perfectly. It couldn't be seen from the ground at all, it
was that well hidden. But the neighbor below us had trouble with his clock
radio receiving our 2m activity, so I gave away the J-Pole and built a 2m
Moxon. That was hidden inside a wooden privacy lattice. We put 2 of these
little gazebo-like fences on the balcony, one on each end, and the antenna
was mounted inside one end. The null lobe was toward the building, and the
downstairs neighbor never complained again.

If I had to move into an apartment or other place that didn't allow outside
antennas, I have a usable small transmitting loop that I could use indoors
with some success. I've hit Bavaria with it using 5w with the antenna in my
house on my workbench, so it must be getting out. Just a cheap loop I got
on Ebay for around $100US

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Wed, Aug 30, 2023 at 1:50 PM DAVID MOORMAN  wrote:

> Rob, do they specifically forbid HF radio transmission?  I live in a small
> (21 unit) condo building near Chicago, and the association is kind enough
> to let me put a Hustler antenna with three resonators on our first floor
> balcony.  It works but OK not great.  If you’re on a higher floor, you can
> do quite well from a condo.
>
> Is the building frame construction or steel framework with reinforced
> concrete slabs?  Wood frame construction is much better!
>
> Dave  K9SW
>
> > On Aug 30, 2023, at 11:57 AM, ROBERT FOLLETT 
> wrote:
> >
> > I am moving into a Condo complex, and can’t do HF radio there….
> Reluctantly, I must Part with these, (along with a ton of other ham stuff)
> >
> > K2:  SN 0356, Int Batt, ATU, and Tilt Stand — No Mic.
> >
> > Make an offer, as I have no idea of value
> >
> > K3:  SN 6154
> > K3/100
> > KAT3
> > KXV3A
> > KFL 3A-2.8_2,7
> > KFL3A-400
> > KFL3A-1.8k
> > LBPF3 General Coverage RX
> > MH2 Mic
> >
> > The K3 has only been used for SSB and CW, so it has no hardware updates.
> >
> > Make an offer, I will ship, minimum expected $1000 + shipping cost.
> >
> > Rob -  KT7L
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to k...@comcast.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ard...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] FOR SALE: K2 (now condos)

[David Christ]

As you point out condo does not automatically mean no ham radio.  Here we have 
13 units and I got condo board permission for a 30 foot tower and hex antenna


David K0LUM

> On Aug 30, 2023, at 12:48 PM, DAVID MOORMAN  wrote:
> 
> Rob, do they specifically forbid HF radio transmission?  I live in a small 
> (21 unit) condo building near Chicago, and the association is kind enough to 
> let me put a Hustler antenna with three resonators on our first floor 
> balcony.  It works but OK not great.  If you’re on a higher floor, you can do 
> quite well from a condo.  
> 
> Is the building frame construction or steel framework with reinforced 
> concrete slabs?  Wood frame construction is much better!
> 
> Dave  K9SW
> 
>> On Aug 30, 2023, at 11:57 AM, ROBERT FOLLETT > > wrote:
>> 
>> I am moving into a Condo complex, and can’t do HF radio there…. Reluctantly, 
>> I must Part with these, (along with a ton of other ham stuff)

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] FOR SALE: K2

[DAVID MOORMAN]

Rob, do they specifically forbid HF radio transmission?  I live in a small (21 
unit) condo building near Chicago, and the association is kind enough to let me 
put a Hustler antenna with three resonators on our first floor balcony.  It 
works but OK not great.  If you’re on a higher floor, you can do quite well 
from a condo.  

Is the building frame construction or steel framework with reinforced concrete 
slabs?  Wood frame construction is much better!

Dave  K9SW

> On Aug 30, 2023, at 11:57 AM, ROBERT FOLLETT  
> wrote:
> 
> I am moving into a Condo complex, and can’t do HF radio there…. Reluctantly, 
> I must Part with these, (along with a ton of other ham stuff)
> 
> K2:  SN 0356, Int Batt, ATU, and Tilt Stand — No Mic.  
> 
> Make an offer, as I have no idea of value
> 
> K3:  SN 6154
> K3/100
> KAT3
> KXV3A
> KFL 3A-2.8_2,7
> KFL3A-400
> KFL3A-1.8k
> LBPF3 General Coverage RX
> MH2 Mic
> 
> The K3 has only been used for SSB and CW, so it has no hardware updates.
> 
> Make an offer, I will ship, minimum expected $1000 + shipping cost.
> 
> Rob -  KT7L
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE: K2

[ROBERT FOLLETT]

I am moving into a Condo complex, and can’t do HF radio there…. Reluctantly, I 
must Part with these, (along with a ton of other ham stuff)

K2:  SN 0356, Int Batt, ATU, and Tilt Stand — No Mic.  

Make an offer, as I have no idea of value

K3:  SN 6154
K3/100
KAT3
KXV3A
KFL 3A-2.8_2,7
KFL3A-400
KFL3A-1.8k
LBPF3 General Coverage RX
MH2 Mic

The K3 has only been used for SSB and CW, so it has no hardware updates.

Make an offer, I will ship, minimum expected $1000 + shipping cost.

Rob -  KT7L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE: KX1 & Accessories

[ROBERT FOLLETT]

KX1, original owner, perfect condition, Stored in a Field Locker box with keyer 
and wire antenna.
will ship, make me an offer!  Photos available upon request.
 
Rob, KT7L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: KFLA-3A 8 pole filter for wide SSB (2.8 kHZ)

[Doug Hensley]

For Sale:  One KFLA-3A 8 pole filter for 2.8 kHZ.  Makes
net operation much more pleasant to work.

As new, $165 plus USPS.  M.O. or personal check only.

This is an Elecraft filter which is guaranteed.

Mahalo,

Doug W5JV






Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] for sale...knobs and book

[thaire.w2apf]

I no longer have my K3S so selling the following:

 

Weighted VFO knobs for K3 or K3S (two: VFO A and VFO B)  $100 delivered
continental US   (not for K4)

Fred Caty Book: "The Elecraft K3s and P3" (also with manual for K3s)  $40
delivered continental US

 

PayPal, MO or check

 

73,

 

Thaire  W2APF

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] SOLD.......Sale......KXIO2 Board for the KX2

[Ken]

Hi all, have the subject board for sale.
A pull-out from my KX2. Working fine.
$45.00 shipped CONUS.
Zelle, PP FnF, MO, cleared Personal Check, Bank Cashier's Check.
Thanks, Ken, W2GIW


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale......KXIO2 Board for the KX2

[Ken]

Hi all, have the subject board for sale.
A pull-out from my KX2. Working fine.
$45.00 shipped CONUS.
Zelle, PP FnF, MO, cleared Personal Check, Bank Cashier's Check.
Thanks, Ken, W2GIW


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale Last call upgrade kits for K3.

[Chris Ezell]

I have these upgrade kits for sale.

1 each KIO3BUPKT-WL_KI03B Upgrade Kit for K3 [Sales]

2 each KSYN3AUPG-WL _KSYN3A Upgrade Kit for K3 [Sales]

Received these from Elecraft while on Vacation and past the 30-day return 
window.
These are factory sealed in the original shipping box.

Sell as a package only please to an operator who wants to upgrade their K3.

Cost from Elecraft was $1287.94  Original invoice included.

Will sell for $ 1250.  Shipped to CONUS address.

PayPal is ok (fees paid by buyer, if there are any), ZELLE and VENMO is okay 
for payment.

Personal or Cashier's checks are okay, but time will have to be allowed for 
ample time to clear and be deposited.


Please contact me off list.  QRZ email is current

73

Chris
KD6EOS

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale...Penntek TR-35 QRP CW Transceiver...... REV A

[Ken]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale.....Kenwood HS-5 Communication Headset

[Ken]

Hello all,
I have a never used, Kenwood HS-5 Communication Headset. Normally $99.00 at DX 
Engineering, not including shipping. $70.00 shipped from here.
>From a close friend who took ill before he could use them.
About a year old.
Photos available.

Postal Money Order, Bank Cashiers Check, "Cleared" Personal Check or Zelle ok.
Zelle preferred.

PayPal has been causing problems so I need to stay away from it for a while.

Please use just the "QRZ.COM" e-mail address for communication. 
As usual, no returns/refunds for all the usual reasons.
Thank you for reading! Please be safe! Ken, W2GIW.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale...Penntek TR-35 QRP CW Tranceiver

[Ken]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] "SOLD".......SALE......Elecraft Macro Programming Manual. 175 Pages.

[KJ]

Thanks to Doug for the rapid sale!!
Ken

Hi all,
I have a like new, "Elecraft Macro Programming Manual." 175 pages by Fred Cady 
- KE7X.
For the K3s, K3, KX3 and P3/SVGA, PX3 and K-Pod.
Came with a used KX3 I purchased. A great manual for the right person.
$22.00 shipped, CONUS
Thanks, Ken, W2GIW



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale K3 DX/Contesting Transceiver an accessories

[David Needham]

I am selling my well equipped, single receiver K3. It comes from a
non-smoking, no pet home and is in excellent condition. It has been my
backup rig and is lightly used. It will come carefully packed in an
Elecraft K3 box.

It is Serial number 52XX and includes the following:
- KSYN3A-F, Synthesizer upgrade
- KDVR3, Digital Voice Recorder
- K312VMDKT-F, 12VDC mod for P-3 power
- KXV3B-F, RX Ant, IF out, Preamp
- KIO3B USB Interface upgrade
- 2.7 kHz stock SSB filter
- 2.1 hHz, 8 pole SSB filter
- 400 Hz, 8 pole CW filter
- 250 Hz, 8 pole CW filter
- Neogrip for tuning knob

I sent it to the factory for the following updates  in October 2017:
- KPOD Ready, FP R82 to 6.8 ohm
- L3AudProtMDKT Audio Protection Board
- Gold Pins: Front Panel, P30 and P35
- 7T Capacitor
- Stainless top cover screws
- Factory calibration and alignment to meet or exceed factory specifications

Price $1,950, which includes 50% of the cost for shipping and insurance to
the lower US 48 states. Other locations are negotiable.

Also for sale:
- KAT3A 100W ATU, new, never installed $425.00
- K-Pod and flat cable for K3, like new, includes new KPOD Aux cable $295

Please contact me off list at AA4VT dot Dave at gmail dot com
-- 
Thank you!
David Needham, AA4VT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE....K2/10

[KJ]

Hello all,

Putting my, well cared for, K2 up for another good home.
Not using it enough and would like it to go to someone while it's still 
operating as designed.  Rated power out on all bands and a nice quite receiver.
Been trying to downsize over the past few years in anticipation of a move to a 
smaller place, maybe a condo. Also not wanting to leave items as a burden to my 
wife and family if something happens to me. Not 20yrs old anymore! Or even 60!!

I built this one in 2003 and shortly after, three other K2's for other people.
Adding it up over the years, I don't think it could have 5 hours of operating 
time. 95% receive.
I've also built a K1, KX1 and various other radios over the years beginning 
with Heathkits. Latest was the 4SQRP Club's Paraset, next the Penntek TR-35. 
All sold.

This K2 has all the options "except" the 100w amp, DSP filter and battery.
All firmware is up to date, however, there may be an update available for the 
SSB board and possibly an optional mod.
I don't use SSB, just CW. The option was available then and works fine.
The photo may look like the display lighting isn't working properly. However, 
the lighting I used washed it out. Proves I'm no photographer! Display is fine.
Kept In a covered/no pet, no smoke environment.
Photos can be seen at "HAMSLIST.COM."

You also get the K60XV transverter option which includes 60M.
I would rate this K2/10 overall, nearly a 10. One small scratch on the top rear 
(photo).
Thanks but no trades.
All the manuals (notes and all) are included. Additional Elecraft approved mod 
sheets are also included.
Options are listed below:
KAT2 20W Internal ATU.
KAF2 Audio Filter & Real Time Clock.
KIO2 RS-232 Serial Interface.
KSB2 SSB Board.
MH2 Microphone.
KNB2 Noise Blanker.
K160RX 160M Option/W Dedicated Receive Only Port.
K60XV 60M W/Transverter Ports.
Not picturedThe RF Probe. Used in alignment, is included, along with a 
group of extra parts from the above Elecraft kits from over the years.
Since shipping $'s are just outrageous anymore, (like everything)
this offer is for interested parties on the "East Coast" states.
Local pickup is fine!

I'll pass over my phone number, via email, for any detailed discussions, if 
requested.
$775.00 which includes shipping, again, to "East Coast" states. May be Fed X, 
UPS or USPS.
Postal Money Order, Bank Cashiers Check, "cleared" Personal Check, Zelle or 
PayPal ok.
$800.00 with PayPal good & Services.
Please use only  the "QRZ.COM" e-mail address for communication. 
As always, no returns/refunds for all the usual reasons.
Thank you for reading! Ken, W2GIW.

PS: For anyone looking for Elecraft services, a very good source is;
https://www.w8fgu.com/service.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] "SOLD".....Sale....KX-3 "SIDE KX" End Panels and Lexan Cover

[KJ]


Thanks to Dean for the quick purchase..Ken, W2GIW



On Jun 27, 2023, at 7:09 PM, KJ  wrote:


Hi all,
I bought a used KX-3 which came with the SIDE KX end panels and the Lexan cover.
Nice front protection. The cover fits securely between the side panels.very 
securely. 
I plan on using the KX-3 inside so the sides and Lexan cover are surplus.
In excellent shape. Originally $69.00.
Photos on request.

I'll pass over my phone number, via email, for any detailed discussions if 
requested.
$45.00 for both, which includes shipping to CONUS only. Add $5.00 for West of 
the Mississippi.
Postal Money, Bank Cashiers, "Cleared" Personal Check, Zelle or PayPal!
$47.00 with PayPal good & Services +$5.00 West of the Mississippi.
Please use just the "QRZ.COM" e-mail address for communication. 
As usual, no returns/refunds for all the usual reasons.
Thank you for reading! Please be safe! Ken, W2GIW.

PS: For anyone looking for Elecraft K2 services, a very good source is;
https://www.w8fgu.com/service.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale - Elecraft AX-1 Multiband Portable Antenna

[Pete Smith N4ZR]

At the CWOps dinner in Dayton, I won an Elecraft AX1 multiband portable 
whip antenna with the 40M extender, bipod and tripod adapter - all 
together costing $227 from Elecraft.


Since the chances of my operating SOTA or POTA are somewhere between 
zero and some imaginary number, I'm offering the entire system, still in 
the original packaging from Elecraft, for $120 including shipping. If 
interested, please respond directly, off the reflector.


--
73, Pete N4ZR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE - K3S, P3, K-POD

[Don Davidson]

I bought a K3S and associated equipment only to realize that it was more
than what I needed. Therefore, I am selling the following for $3,850, plus
shipping & insurance: (PayPal is acceptable)

*K3S transceiver* Serial # 11862 – It does not have any mods. It was
factory manufactured. Owner’s manual included.

*P3 Serial* #3900, High-Performance Pan Adapter, factory manufactured.

*Elecraft Microphone model MH4*

*K-Pod* Control Panel, factory manufactured.

*Elecraft Directional Coupler/panadapter TX sensor*

*Cables* – I believe I have all the cables needed.

-- 
Don Davidson
K5DTD
512-808-8492
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE: Heil PR-781 With Heil Boom Hardware For Elecraft K3 or K4

[Tony]

All:

I have a Heil PR-781 microphone with Heil boom and hardware. Comes with 
Heil XLR cable for either the Elecraft K4 or K3 transceivers. Microphone 
and hardware come in their original boxes. This includes the Heil PL2T 
boom, RS-1 riser.


Items sell for $400 + if purchased new. Microphone alone sells for $200.00

Asking $275.00shipped -- pictures upon request. Original owner non-smoker.

Please contact me direct via email.

Tony -K2MO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale UK mainland only

[Barry Keith Middleton via Elecraft]

Regretfully I have the following for sale. Elecraft KX3, KXPA100 with 
KXAT 100


Elecraft PX3.KX3 also fitted with roofing filter and the 2 metre module,

battery charge with Panasonic Enoloop batteries and real time clock.

 Also original Manuals, Fred Cady's book

All leads including power pole adaptor for KX3, and will

also included a Signal link date interface.

I may be able to deliver it to the buyer and no cost.

I am the original owner and has been in a non smoking

and no pets household.

Asking price £2,500 cash or bank transfer.

    Barry Middleton G4DBS

PS resent as I forgot items.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale UK mainland only

[Barry Keith Middleton via Elecraft]

Regretfully I have the following Elecraft KX3, KXPA100 with KXAT 100.

Elecraft PX3. Also original Manuals, Fred Cady's book

                                            All leads including power 
pole adaptor for KX3, and will


                                            also included a Signal link 
date interface.


I may be able to deliver it to the buyer and no cost.

Asking price £2,500 cash or bank transfer.

    Barry Middleton G4DBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE

[Michael Ortlieb]

I have for sale a very nice KPA-500, looks very good works as it should.
$1995.00  We will be at Hamvention next week. Prefer Cashier's check or MO.
contact KN9P off list, good on QRZ. 920-853-7073
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: P3

[Steve Lawrence via Elecraft]

Please reply ONLY off list.

For Sale:

P3 Panadapter - Basic, no VGA etc.

Includes K3 to P3 cables: RS-232; DC power; IF BNC
Original manual.
Elecraft shipping box.

Make offer. 

Shipped US only or pick up in West Los Angeles near Santa Monica Airport.

Thanks - Steve WB6RSE

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 Sale

[bhtoub]

The pending sale of the K3 #5024 was sold. Thanks to everyone that
was interested.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FOR SALE P3 WITH SVGA AND TXMON .

[Ramon Batista]

*WD4X.*

*For Sale An Elecraft P3-F Panadapter With TXMON And SVGA Options. The Unit
Is In Excellent Cosmetic And Operational Conditions With No Dents, Dings Or
Scratches. The Sale Include The Power Cable, BNC To BNC Cable, DB9 Male To
Female Cable For K3 And CBLP3Y Cable For K3S. Latest Firmware Update Is
Done. The Unit Will Be Shipped In The Original Box With Inserts. Will Trade
It For ICOM 7300 Or Elecraft K2-100. Asking Price Is $900.00 Shipped And
Insured And Payment Through Zelle, USPS Money Order Or Check. My QRZ
Information Is Up To Date And Phone Number 239-227-9414.*

*Ray WD4X.*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 sale

[Edward Mccann]

I hope the sale is pending, not the radio !!


> On Feb 26, 2023, at 1:13 PM, bht...@juno.com wrote:
> 
> Thanks to everyone who was interested in my sale
> of the K3 #5024. The radio is pending.
> 
> 73,
> Brian K1DIH
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to edwmcc...@gmail.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 sale

[bhtoub]

Thanks to everyone who was interested in my sale
of the K3 #5024. The radio is pending.
 
73,
Brian K1DIH

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 sale

[bhtoub]

Thanks to everyone who was interested in my sale
of the K3 #5024. The radio is pending.

73,
Brian K1DIH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale P3 with SVGA module

[Neil]

*
*
*For Sale P3 with SVGA module...I have available to go to a new home, 
the Elecraft P3 pan display with the SVGA module S# 4770. Condition is 
like new and has the complete cable set for the K3 and K3s*

*Along with the manual (original).
sold my K3s and waiting on a K4D so the P3 is surplus. $650. shipped to 
the lower 48. Contact me off line at **n4fn "at"arrl.net 
or by phone 770-321-9348*

*Neil Foster  N4FN*
*

*

--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: K3 and P3 Set

[Jeffrey Coleman]

Selling my K3 and P3 with the following installed:
KPA3
KAT3
KIO3
KXV3
KSYN3AUPG

Also has the following filters:
KFL3A-2.7K
KFL3A-400
K3 700Hz 8-pole inrad roofing filter
KFL3C-200

P3 has the:
P3SVGA Adapter
P3TXMON

This was my dads before mine after he passed and was built by him from a
Kit and well taken care of. I have only used it a few times but everything
worked as it should . I’m happy to take pictures and send them separately
to anyone who’d like to see them. Will come with all the cables needed to
connect the K3 and P3 together. It does not have a hand mike with it. I can
throw in the manuals I’ve printed for it if you’d like.

Asking $2700  for the pair sold as is with no returns (Part Swappers). I
will Include shipping. Sold as a pair only. I will do PayPal friends and
family or any certified payments once cleared, radio will ship with
tracking and all. Will also meet locally(zip 17970) as well if anyone’s
near me.  Any questions let me know. I will answer them as best I can.
Email questions or comments to jeffreycolem...@gmail.com

Jeffrey Coleman
N2BC
-- 
Sent from Gmail Mobile
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale K3/100

[Buck K4IA]

You got a heck of a deal.  I've seen those P3/VGAs go for $800 or more.

Buck, K4IA
DXCC Honor Roll
8BDXCC
Author EasyWayHamBooks.com

On 1/16/2023 3:40 PM, Jim Brown wrote:

On 1/16/2023 7:14 AM, Marc via Elecraft wrote:
I rarely do not post a price when selling, but I am not sure what this is worth now. 



I recently bought an early serial number K3 and P3/SVGA from a member 
of our local contesting club for $2K. It had the second RX, both were 
loaded with 2-3 filters, and the P3 had the wattmeter.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to radiok...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale K3/100

[Jim Brown]

On 1/16/2023 7:14 AM, Marc via Elecraft wrote:

I rarely do not post a price when selling, but I am not sure what this is worth 
now.


I recently bought an early serial number K3 and P3/SVGA from a member of 
our local contesting club for $2K. It had the second RX, both were 
loaded with 2-3 filters, and the P3 had the wattmeter.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale K3/100

[Marc via Elecraft]

K3 in very good clean condition, one owner radio, S/N 2357 with the following 
modules installed.
KAT3 ATU
KBPF3A-F GENERAL COVERAGE RX MODULE
KTCX03-1 TCXO
KRX3-K 2ND RX MODULE
KDVR3 DVR
KXV3 K3 TRANSVERTER INTERFACE
400HZ 8 POLE FILTER IN MAIN AND SUB RX
2.8 KHZ 8 POLE FILTER IN MAIN AND SUB RX
6 KHZ 8 POLE FILTER IN MAIN AND SUB RX
MH2-HAND MICROPHONE
CUSTOM CORDURA CASE WITH EMBROIDERED LOGO
KRC2 BAND DECODER/CONTROLLER
Manuals included. Firmware is up to date.

I rarely do not post a price when selling, but I am not sure what this is worth 
now. Best offer takes it, local pick up near NYC or add shipping.

Thanks,

Marc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale - AF1 Audio Filter Kit - Built

[J]

Elecraft AF1 Audio Filter Kit - Built - no case.  As I recall, I built 
it and put it in a plastic bag in the parts closet, so it was tested but 
not used for any length of time.  I believe I have the cables that came 
with it - buyer gets what I have with it.  I will also include the 
instruction manual, if I can find it.   $40 including shipping FOB to US 
or Canadian destination only.  (I am too old and feeble ( i.e., lazy) to 
figure out customs duties and all that foreign shipment jazz.) Sold as 
is, no warranty.   If interested, please contact me off list =    
mycallsign99 at gmail.com    Thanks.   K8JHR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale KX3 and PX3

[Edward Seeliger]

FOR SALE:PX3 with KX3 cable - $600 + shippingKX3 - all options - $2000 + 
shipping   KXBC3 charger / real time clock   KXFL3 dual passband roofing filter 
  KXAT3 20-watt internal tuner   KX3-2M 2M module   KXPD3 Precision Iambic 
Keyer Paddle   MH3 hand mike   Enoloop batteries   Nifty manual   Pro Audio 
power supplyPayment by Zelle, Cashiers check, personal check (must clear before 
shipping), Paypal (you pay fees - friends and family)Edd - KD5M  eseeliger at 
earthlink.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft K4D-F like new

[k2we via Elecraft]

I have a K4-D-F Serial #0492 For Sale with almost zero use. Still has plastic 
protection over the display!! It was ordered June 2021 and delivered January 
2022. It stayed in it's sealed factory box for 8 months as I was up in New 
York.Only 3-4 QSO's made. Comes with the factory box and packing, All cables, 
factory manual as well as the ATU module and digital factory module installed 
and the hand microphone.
Just too much radio for me.. Been licensed 56 years! Too much band noise here 
with my very modest antenna. Asking $5000 Local pick up ONLY  No shipping.. I 
will be happy to provide digital photo's.  Radio is in mint condition, fully 
operational.. Please text/call 941-302-6444 with any questions Thanks.. 
Steve/k2we  ex:3W6WE  Siesta Key/Sarasota, FL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft K2/100

[David Inger]

I have for sale a very nice K2 (100 watt version).  I am the second owner.  The 
radio received a full check out and alignment by Dave Van Wallaghen W8FGU.  I 
also had Dave add the fixed audio output board and rear panel jack.  This 
option provide a much more stable audio signal for digital modes such as FT-8, 
etc.  This is a great compact and solid performing radio.  It is also in 
excellent physical condition.

The radio includes the following Elecraft options:

• KSB2 SSB adapter (wired for Kenwood/Elecraft mics)
• KNB2 Noise Blanker
• K160RX 160-meter and receive antenna port
• KIOS2 RS-232 interface board with USB adapter cable
• Power cable with Anderson PowerPoles on each end

I also have all of the assembly/operation manuals for radio and options.  The 
price for the K2 is $900.00 firm plus $25 shipping.  I also have available a 
Signalink USB digital interface with all required cables for digital mode 
operations.  I will sell this package for an additional $50 to the buyer of the 
radio.  Payment by USPS Money Order, Zelle or personal check pending bank 
clearance.  Pictures will be available to interested buyers.

73 de K6SBA
David in Santa Barbara, CA


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale Elecraft K2/100

[David Inger]

I have for sale my K2 (100-watt version).  I am the second owner.  In 2020, I 
sent the radio to Dave Van Wallaghen W8FGU for a complete alignment and 
checkout.  Dave insured that all relevant upgrades had been installed.  I also 
had Dave install the fixed audio output board and rear panel jack.  This option 
provides a more stable audio output for use with digital modes such as FT-8.  
This is a great, compact and solid performing radio.  It is also in excellent 
physical condition.

The K2 is fitted with the following options:

* KSB2 SSB adapter with mic jack wired for Kenwood/Elecraft mics.
* KNB2 Noise Blanker
* KIOS2 R-232 board with serial-to-USB adapter cable
* K160RX module which add 160-meter operation and receive antenna port
* DC power cable with Anderson PowerPoles on both ends.

I have most of the original assembly/operations manuals for the radio and 
options. The price is $900 firm + $25 shipping to any US Zip Code.  Payment by 
USPS money order, Zelle or personal check (shipping pending bank clearance).  
Pictures are available to interested buyers.

I also have a Signalink USB interface with all the necessary cables to get the 
K2 on the digital modes.  The price is $50 to the buyer of the K2.

73 de K6SBA

David in Santa Barbara, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale - Remote Rig 1258 MK II K3 set

[Edward Seeliger]

For Sale - Remote Rig 1258 MK II K3 pair with Wifi modules and K3 connecting 
cables - $550 plus shipping.
Contact me at this email address.
Edd - KD5M
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: P3 Panadapter and New SP3 Speaker

[RVZ via Elecraft]

Selling a P3 Panadapter in nice condition with a matching 2kw Directional 
Coupler, includes original box for $750.  Also, a brand new never unwrapped SP3 
Speaker for $250.  Contact off list at: r...@aol.com 73, Dick- K9OM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale - K3/0 Mini with Remote Rig 1258 Mk II K3 pair

[Edward Seeliger]

K3/0 Mini with Remote Rig 1258 Mk II K3 pair (with WiFi modules) for sale as 
packagePrice - $1250 plus shipping/insurance - Paypal, USPS money order, 
cashier check. Current firmware. Connecting cables, manuals.Original owner, non 
smoking. Sale is final - no return or refund.Edd - KD5M  eseeliger  at 
earthlink dot net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft K3s, P3, 2x SP3.... fully loaded.

[Clay Autery]

Need to downsize Hopefully, I will be getting into a fully optioned 
KX3/PX3/KPXA100 setup so I can more easily hump the radio (sans other) 
to the field on foot, bike, or canoe.
This combo was/is assembled and tuned and petted, and...  by me with 
exacting detail, babied like my own children, regular checkups back at 
Elecraft.


*_Elecraft K3s, Serial # 106xx_*
K3S/100-K   $2649.95    1 K3S 100W Xcvr. (Modular Kit) (Upgraded 
from SO-239 to best N-Connectors I could find.)

KAT3A-K $319.95 1 K3S ATU (Modular Kit)
KRX3A-K $699.95     1     High Performance Subreceiver Kit *(It was 
the LAST Brand New Unit on the shelf)*

K144XV-K $389.95 1 144-148 MHz 10 W Internal Module
K144RFLK $99.95 1 K144XV Reference Lock Board
KFL3A-400 8-pole   $312.90     2     400 Hz 8 pole filter (matched, had 
to buy 3 to get proper match)

InRad 700Hz     $280.00 2 matched 700Hz, 8-pole filters
KFL3A-2.8K-IR_2.8 kHZ     $299.90 2 Matched 2.8k filters
KFLA3A-6K  $254.95 2 6K AM/ESS) filters
KFL3B-FM     $205.00     2 13k FM filters
KTCXO3-1    $119.95 1 K3S TCXO (0.5ppm)
K3EXREF $99.95  1 Ext 10MHz Ref Input for K3S
KBPF3A  $359.90     2     K3S Gen. Cov. RX Modules ( 1 per receiver)
KDVR3   $149.95 1 K3S Dig. Voice Recorder
SP3     $359.90     2     SP3 External Speakers

_*Elecraft P3, Serial # 41xx*_
P3-K    $699.95 1 P3-K Panadapter Kit
P3SVGA  $279.95 1 P3 Video/FFT Adapt.
P3TXMON $209.95  1 P3TXMON P3 Transmit Monitor
DCHF-200 FREE 1 1.8-54 MHz, 0.1-200W Coupler

To my knowledge, ALL applicable options and updates have been applied.

*06/01/2017 - Factory checkup, upgrades:*  $300
K-Pod update,
IMD update,
testing, rtn to factory spec.

*01/21/2020 - Trip to Factory:*  $291.69
Replace shunt resistor near Q2,
Replace TMP socket on 2M module,
Sub-RX installation verified correct,
KPAIO3MDKT Installation,
KPAIO fan input fix,
upgraded KPA3A

*02/01/2020 - ID and replace all NON-stainless steel hardware* on 
exteriors of chassis.


I now have $9206.88 total into the entire line.*
*

*For Sale:  $8250.00, *shipped CONUS/firm, other than CONUS at buyers 
expense/full insurance.


Includes binder with documentation on most everything and changes 
posted.  Also includes various cables, extras, CD/DVD with manuals, 
data, software, firmware, et al.


Yes, I am asking a lot, and as a pristine, fully optioned K3s/P3/SP3 
setup it is worth every penny.  
I have it priced at the compensation level at which I (think I) can let 
my treasured setup go.


73,

--
Clay E. Autery, Jr.
KY5G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale

[David Bunte]

FS: K3 & P3 w/SVGA



Kit as ordered in April 2011:

K3 - SN: 05455

Original 2.7 kHz filter

Optional 400 Hz filter

KAT3 antenna tuner

KPA3 100-watt PA

ADDED LATER:

In about 2014 I added:

KSYN3A upgraded synthesizer

In May 2015 I had the factory add:

KRX3A second receiver with KSYN3A

2.7 kHz and 400 Hz filters for 2nd receiver

KXV3B transverter interface

KIO3B USB I/O board

Preamp upgraded to dual stage



All manuals are included (multiple copies of some of them) Also included:

Fred Cady 2nd Edition K3 Book & “Nifty” Manual



P3 SN: 2836 was Factory built

I added the SVGA kit.

Manuals included, plus “Nifty” Manual

One owner, non-smoking environment, never portable or mobile.

Prefer to sell together for $2850 shipped to CONUS

Serious offers or splitting them can be discussed.

Can meet within about 125 miles of West Lafayette, IN to save shipping
costs.

I will be at W9DXCC in September and can have them with me there.

Please email me OFF LIST at: dpbu...@gmail.com

David Bunte – K9FN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale - "K-line" Covers

[David Inger]

The covers have been spoken for.

73 de K6SBA

David in Santa Barbara, CA

OhK4 #906, Yeah Baby!!!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale - "K-line" Covers

[Edward Mccann]

Dave-
I’ll take them.
Ed McCann
AG6CX
Sausalito

> On Aug 24, 2022, at 5:53 PM, David Inger  wrote:
> 
> Recently I sold my K3 and P3 to partially fund my new K4.  I have set of 
> barely used covers that are in excellent (dare I say new?) condition.  The 
> way I ended up arranging my equipment there was very little need to cover the 
> various pieces.
> 
> The covers were made by Pat Osborne, KI4RFT.  They are made very high quality 
> felt-backed black vinyl. Each cover is embroidered in gold with "ELECRAFT" 
> and the equipment model.  The four covers are for the:
> 
> * K3
> * P3
> * KAT500
> * KPA500
> 
> I want to sell them as a set, rather than messing around with multiple 
> shipments.  $50.00 will get you the complete set including shipping.   Please 
> no PayPal.  I will accept USPS M.O., personal check, Venmo or Zelle.  Or, if 
> you are in the vicinity of Santa Barbara, CA you are welcome to pick them up.
> 
> 73 de K6SBA
> 
> David Inger
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to edwmcc...@gmail.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale - "K-line" Covers

[David Inger]

Recently I sold my K3 and P3 to partially fund my new K4.  I have set of barely 
used covers that are in excellent (dare I say new?) condition.  The way I ended 
up arranging my equipment there was very little need to cover the various 
pieces.

The covers were made by Pat Osborne, KI4RFT.  They are made very high quality 
felt-backed black vinyl. Each cover is embroidered in gold with "ELECRAFT" and 
the equipment model.  The four covers are for the:

* K3
* P3
* KAT500
* KPA500

I want to sell them as a set, rather than messing around with multiple 
shipments.  $50.00 will get you the complete set including shipping.   Please 
no PayPal.  I will accept USPS M.O., personal check, Venmo or Zelle.  Or, if 
you are in the vicinity of Santa Barbara, CA you are welcome to pick them up.

73 de K6SBA

David Inger
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: KXPA100 Amplifier

[phil-z]

The price is reduced to $925, shipped CONUS, includes PayPal fee. Contact off 
list.

Phil N3ZP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: KXPA100 Amplifier

[phil-z]

Lightly used Elecraft KXPA100, 100 Watt Amplifier. 3.5 to 7 Watts in for 100 
Watts out. Includes DC cable, coax jumper cable, USB cable and key line cable. 
No printed manual. Serial # 1353. Does not the have internal tuner. Selling for 
a ham friend N8IW who purchased it used but has only used it a few times. 
Excellent condition, no dings, marks or scratches. Don't know if it was factory 
or kit built. Sold as-is. Pictures available.
Price $1000 shipped CONUS. PayPal OK. Contact off list phi...@comcast.net
Phil N3ZP

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: K3S Filters

[Doug Hensley]

I have one each of the following K3S filters for sale:

13 kHZ as require for FM service

2.8 kHZ wide SSB

2.1 kHZ narrow SSB

250 hZ  narrow CW

All of these are the 8 pole INRAD high-performance filters
which are no longer made.  Price is $175 ea plus simple
USPS postage.  Payment by check or m.o. only.  NO PAYPAL.

Thank you,

Doug W5JV




Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Estate Sale KPA500/KAT500,; KX3, KXPA100

[John Langdon]

Selling for the estate of a friend. All items in excellent condition, in use
until recently, one owner, air-conditioned shack, non-smoker. Will meet you
anywhere in Central Texas area for cash sale.

 

*   Elecraft KX3 # 9041 factory shack in a back pack with CW roofing
filter, attached CW paddle, PX3 display, and wire antennas (does not have
AX1 antenna) with KXPA100 power amp SN 2571, Fuyuang Li-ON battery and
switching supply, Alinco DM-330 power supply, and Bioenno Power Li-IP 10A
battery all for $2600

 

*   Elecraft KPA500 #2464 (110V cord) and KAT500 #1633 combo, factory
assembled $2500

 

 

73 John N5CQ

jlangd...@austin.rr.com <mailto:jlangd...@austin.rr.com> 

512-203-4530 text or voice  

 

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: Elecraft KRX3A Sub-receiver with General Coverage option

[Frank Krozel]

Sorry, disregard
-73-  FrankKG9H
kg9hfr...@gmail.com




> On May 25, 2022, at 12:31 PM, Doug Hensley  wrote:
> 
> For Sale is my KRX3A Sub-receiver with the General Coverage option.
> 
> If you look on pages 9-12 in the KRX3A manual, you will see what would have 
> come with a KRX3A;
> https://ftp.elecraft.com/K3S/Manuals%20Downloads/E740126A%20KRX3A%20Subreceiver%20Installation%20and%20Operation.pdf
> 
> Note the new KSYN3A is part of that group.  I am Including with this sale 
> their General Coverage bandpass filter board and factory
> 2.7 kc filter.   A digital copy of the latest KRX3A manual will be in your 
> box.
> 
> These were originally factory installed and three weeks ago, factory removed 
> by the same engineer.  They are pristine checked parts
> & ready for a new home.   Price is $1200 plus simple ground or USPS shipping 
> (your choice).  FYI, this was very expensive to do.
> 
> To the purchaser of this Sub-Rx package, I am making available 5 of my as new 
> 8 pole filters with bandpass of 200, 400, 2.1, 2.8 and 13.
> My cost was $169 each when I bought them if not higher.   I will readvertise 
> whatever is left after the dust settles.
> 
> Serious buyers only.  I can send pictures, manual page outs.
> 
> Thank you,
> 
> Doug W5JV
> 
> 
> 
> 
> 
> 
> 
> Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kg9hfr...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft KRX3A Sub-receiver with General Coverage option

[Doug Hensley]

For Sale is my KRX3A Sub-receiver with the General Coverage option.

If you look on pages 9-12 in the KRX3A manual, you will see what would have 
come with a KRX3A;
https://ftp.elecraft.com/K3S/Manuals%20Downloads/E740126A%20KRX3A%20Subreceiver%20Installation%20and%20Operation.pdf

Note the new KSYN3A is part of that group.  I am Including with this sale their 
General Coverage bandpass filter board and factory
2.7 kc filter.   A digital copy of the latest KRX3A manual will be in your box.

These were originally factory installed and three weeks ago, factory removed by 
the same engineer.  They are pristine checked parts
& ready for a new home.   Price is $1200 plus simple ground or USPS shipping 
(your choice).  FYI, this was very expensive to do.

To the purchaser of this Sub-Rx package, I am making available 5 of my as new 8 
pole filters with bandpass of 200, 400, 2.1, 2.8 and 13.
My cost was $169 each when I bought them if not higher.   I will readvertise 
whatever is left after the dust settles.

Serious buyers only.  I can send pictures, manual page outs.

Thank you,

Doug W5JV







Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: As New KRX3A Sub-Receiver package for K3s

[Doug Hensley]

For Sale is my KRX3A Sub-receiver with factory 2.7 kc filter

If you look on pages 9-12 in the KRX3A manual, you will see what would have 
come with a KRX3A;
https://ftp.elecraft.com/K3S/Manuals%20Downloads/E740126A%20KRX3A%20Subreceiver%20Installation%20and%20Operation.pdf

Note the new KSYN3A is part of that group.  I am Including with this sale their 
General Coverage bandpass filter board and factory
2.7 kc filter.   A digital copy of the latest KRX3A manual will be in your box.

These were originally factory installed and three weeks ago, factory removed by 
the same engineer.  They are pristine checked parts
& ready for a new home.   Price is $1200 plus simple ground or USPS shipping 
(your choice).  FYI, this was very expensive to do.

To the purchaser of this Sub-Rx package, I am making available 5 of my as new 8 
pole filters with bandpass of 200, 400, 2.1, 2.8 and 13.
My cost was $169 each when I bought them if not higher.   I will readvertise 
whatever is left after the dust settles.

Serious buyers only.  I can send pictures, manual pages outs.

Thank you,

Doug W5JV




Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale K4D / KAT4

[David Deelstra]

K4D / KAT4 is sold and shipped.
Thanks, Jim.
Dave N7ISH


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: K4D and KAT4 tuner.

[James Bennett via Elecraft]

David,

I will take it if it is still available.

Jim Bennett / K7TXA
Eagle, ID



> On May 3, 2022, at 10:47 AM, David Deelstra  wrote:
> 
> Due to financial problems, I am selling my unused K4D and KAT4 tuner. Unit is 
> still in unopemed box. Outer box was opened to remove packing list, inner box 
> has never been opened. Asking $5800 shipped via UPS in CONUS.
> David Deelstra N7ISH good on QRZ.COM and eBay seller ddeelstra(588)100%.
> 
> -- 
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w6...@me.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: K4D and KAT4 tuner.

[David Deelstra]

Due to financial problems, I am selling my unused K4D and KAT4 tuner. 
Unit is still in unopemed box. Outer box was opened to remove packing 
list, inner box has never been opened. Asking $5800 shipped via UPS in 
CONUS.

David Deelstra N7ISH good on QRZ.COM and eBay seller ddeelstra(588)100%.

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For sale: KX3,KXPA100,K3s,P3

[brian]

KX3, K3S, and P3 all sold. Still have KXPA100

73 Brian KF6C.

 

 

From: br...@kf6c.com  
Sent: Tuesday, April 5, 2022 10:10 AM
To: 'Elecraft@mailman.qth.net' 
Subject: For sale: KX3,KXPA100,K3s,P3

 

KX3 sn 10573, has antenna tuner, 2-meter converter, internal NiMH
Charger/Real-time Clock, Dual-Passband Roofing Filter, and Precision Iambic
Keyer Paddle.

KXPA100 sn 1272. Has had, easily removed, plates added to heat sink for RV
mounting, very little used.   

K3s sn 10174 with following options K144RFlk K144XV, K3EXREF, KDVR3, KPA3A,
KBPF3A, KRX3A Filters main 13, 6, 2.8, 0.4 Sub 2.7, 0.40.

P3 sn 4340 with P3SVGA, and external 12-inch monitor.

Will take best reasonable offers. Please email directly to br...@kf6c.com
  if you need more information and pictures.

 

73 Brian KF6C.

 

 

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For sale: KX3,KXPA100,K3s,P3

[brian]

KX3 sn 10573, has antenna tuner, 2-meter converter, internal NiMH
Charger/Real-time Clock, Dual-Passband Roofing Filter, and Precision Iambic
Keyer Paddle.

KXPA100 sn 1272. Has had, easily removed, plates added to heat sink for RV
mounting, very little used.   

K3s sn 10174 with following options K144RFlk K144XV, K3EXREF, KDVR3, KPA3A,
KBPF3A, KRX3A Filters main 13, 6, 2.8, 0.4 Sub 2.7, 0.40.

P3 sn 4340 with P3SVGA, and external 12-inch monitor.

Will take best reasonable offers. Please email directly to br...@kf6c.com
  if you need more information and pictures.

 

73 Brian KF6C.

 

 

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For sale: Elecraft KPA500F

[Scott Manthe]

Hi everyone!

I've got a mint Elecraft KPA500F that I'd like to sell. Factory built, 
serial number 1131. Low hours and like new, with the factory box, manual 
and power cord. No issues. I'd like $2300 for it, plus shipping, etc. 
Please feel free to make a reasonable offer.


Thanks and 73,
Scott N9AA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale - KXV3B Board for K3/K3s

[Dave Agsten]

I never installed this KXV3B board before selling my K3. This gives you the 
preamps for 12, 10 and 6 meters. Please contact me off list if interested. The 
ad is also QTH. n...@comcast.net mailto:n...@comcast.net   73, Dave N8AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] For Sale: Elecraft Transverters for 144, 222, 432 (Jan 2022)

[Mike Lewis]

Update: The Microwave Modules 2M and XV432 are now spoken for.

- Mike

-Original Message-
From: Mike Lewis 
Sent: Friday, January 28, 2022 02:09
To: elecraft@mailman.qth.net
Subject: For Sale: Elecraft Transverters for 144, 222, 432 (Jan 2022)

I have decided to part with a few of my stack of idle transverters.   Among 
them are:
XV144 
XV222
XV432

All 3 have the crystal oven option and in perfect working order and 
cosmetically very good.  Also have several printed manuals.
All 3 are modified to run on an external LO source.   The LO mod is easily 
reversible to use the original crystal and oven.  Only a few parts and jumpers 
need to be repositioned.

There is a SMA jack on the back panel for the external LO, you would need a 
suitable LO source with output up to maybe 14dBm, each is different.  I used my 
Multiband LO box (DigiLo PLL based programmable frequency and level out with 
band decoder) published in Jan 2020 QEX.   

Looking for $350ea or $950 for all 3 (+shipping).  

Also have a Microwave Modules 144-28 with 10W out, offers considered.

73,

Mike Lewis
K7MDL
CN88sf and EL87sm

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft Transverters for 144, 222, 432 (Jan 2022)

[Mike Lewis]

I have decided to part with a few of my stack of idle transverters.   Among 
them are:
XV144 
XV222
XV432

All 3 have the crystal oven option and in perfect working order and 
cosmetically very good.  Also have several printed manuals.
All 3 are modified to run on an external LO source.   The LO mod is easily 
reversible to use the original crystal and oven.  Only a few parts and jumpers 
need to be repositioned.

There is a SMA jack on the back panel for the external LO, you would need a 
suitable LO source with output up to maybe 14dBm, each is different.  I used my 
Multiband LO box (DigiLo PLL based programmable frequency and level out with 
band decoder) published in Jan 2020 QEX.   

Looking for $350ea or $950 for all 3 (+shipping).  

Also have a Microwave Modules 144-28 with 10W out, offers considered.

73,

Mike Lewis
K7MDL
CN88sf and EL87sm

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Elecraft SP-3 Speaker (for K3s)

[Doug Hensley]

I have two Elecraft SP-3 speakers for sale which have not been used;
they were purchased for a special contest station which, thanks to the
pandemic, never materialized.  Probably a good thing as our design ideas
for that have improved.

The speakers match the K3s to the letter.  Price is $250 each plus FedEx
ground shipping.  NO PAYPAL and no p.o boxes.  Physical address and
daytime contact number are required by FedEx.  As I understand it, these
speakers are no longer made so if you had wished you had one, here's an
opportunity.

I'm not always at my computer so if you respond, be patient and I will get
back to you.

Thank you,

Doug W5JV




Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] For Sale: Cumbria Designs Mini-DSP Filter Kit

[Doug Hensley]

I have a DSP Audio filter kit that I don't have time to use and thought
I would offer it here for anyone with a K1 or K2 that might want to try
adding their own DSP Audio Filter.

Cumbria Designs was a British concern famous for its "X-Lock" VFO
stabilizer used on many K1's and older gear with a VFO that was a free
running oscillator.  Works miracles.

This Mini DSP Audio Filter kit was one of their last kits (they closed
doors and moved on to other things) and offered personal tailoring
of the audio product.  I can send a data sheet to anyone interested.
The kit I have has never been gone through, never touched except
to store for a better day.  Looking at it I would think anyone who
successfully built their own K1 or K2 could also handle this.  Having
said that, I also think this kit is not for beginners.  You should have
some good experiences under your belt.

I'm asking $125 plus $5 shipping.

QSL if interested.  I'm shutting down now for the night so will not be
able to reply to anyone until tomorrow AM.

Thank you,

Doug W5JV




Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com