Re: [Elecraft] K4 AM Transmit Bandwith and AM Receive

[Jim Brown]

On 6/2/2024 10:41 PM, Ray wrote:

The TX Bandwidth Question was Not answered !


Not my job, mon!  I'm a customer. I responded with what I knew.

73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 AM Transmit Bandwith and AM Receive

[Ray]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 AM Transmit Bandwith and AM Receive

[Jim Brown]

On 6/2/2024 3:27 PM, Bob Gale wrote:

Also, has AM receive been activated on the K4, and if so, AM selectable 
sideband sync detector?


I listen to the AM Broadcast band using the SSB detector. Max RX 
bandwidth is 5 kHz, which just about optimum for speech. I use it to 
evaluate performance of RX antennas, mostly to make sure they're working 
after storms. Stuff tends to fall on them, like branches and even entire 
trees.


I've never cared about AM TX.

73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 AM Transmit Bandwith and AM Receive

[Bob Gale]

What is the AM transmit bandwith on the K4, and is it adjustable? Also, has AM 
receive been activated on the K4, and if so, AM selectable sideband sync 
detector?

Bob W2VGD

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Jim Brown]

On 5/4/2024 9:21 PM, Jorge Diez - CX6VM wrote:

So there is my question, if for such an expensive piece of equipment, there
could be something of better quality, if not, I apologize, we will have to
live with these things.


The only things that Elecraft should do to prevent lightning damage are 
to properly terminate cable shields to the shielding enclosure at the 
point of entry, properly terminate power system safety ground contacts, 
the the shielding enclosure, and otherwise practice proper bonding 
within their products.


The rest of it is up to us. About a week ago, I posted a link to 
tutorial slides for talks that I've done on the topic. EVERYTHING shown 
is good engineering practice to prevent lightning damage, and much of it 
also minimizes issues with RFI. Anything that we fail to do is an open 
door for lightning damage.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Dave (NK7Z)]

Hi again,

Your grounding sounds good.  I suspect the USB connection used by 
Elecraft was standard, and not something that was lightening proof, so 
yes, any manufacturer can do more, the question is why increase the cost 
of the amp to everyone, when there is little chance the protection will 
ever be used?


If there were a preponderance of KPA1500 amps loosing USB drivers, then 
I might agree with you, but so far, your amp is the only one I have 
heard about that took a lightening hit, and the only one I have heard 
about that has lost a USB driver...


If all you lost was the USB driver, then you are a lucky man, go buy a 
lotto ticket today!!  I would expect a lot more to be damaged by a 
lightening strike...


In any case, it is too bad the amp failed, but by that same token, it is 
really good that is all that happened!


As you mentioned a bit ago, the more hi-tech an items is the more 
sensitive it becomes...


73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/4/24 21:21, Jorge Diez - CX6VM wrote:

Hi Dave

I have a panel like yours, each antenna to a discharger, on a copper 
sheet. Nothing has happened with the coaxial and antenna switch


I have several rods that make the ground and a copper bar behind the 
desk and all the equipment is connected to the ground


The lighting came through the antenna of my internet link, then it went 
to the router, then to the computer where I have the kpa1500 connected 
with a USB cable


My question about whether Elecraft could do more is whether there could 
be something better than the USB it currently has, which seems to me to 
be a simple USB connector, like that of any printer for example.


So there is my question, if for such an expensive piece of equipment, 
there could be something of better quality, if not, I apologize, we will 
have to live with these things.


See you in the bands!!!

Have a good weekend!

73,
Jorge
CX6VM/CW5W

El dom, 5 may 2024 a las 1:08, Dave (NK7Z) (>) escribió:


Jorge,

I can only go by what you said:

"Last week I experienced a lightning strike"

That sounds a lot like a direct discharge into the shack, so I am
responding to your comment, if that is not correct, please help me
understand what actually happened...

Lightening is strange, it can take out one piece of equipment, and not
touch another...  It all depends on how your shack is grounded, and how
it is bonded.  When grounding commercial equipment, even the path the
wire takes is important...  Curves, straight line runs, etc...

What sort of ground system are you using, and what sort of lightening
protection did you have in place at the time of the lightening event?

Take a look at:

https://www.nk7z.net/building-a-coax-entry-panel/


That is my entry panel.  I am slowly building a ground ring around the
house...  Why?  Because only I can build a system to help reduce the
chances of lightening taking out something in my environment.  It is
after all my home, and my environment, so I can not, and do not, hold
Elecraft responsible for things they can not control.  Elecraft, can
not
be responsible for my grounding, and bonding practices.

Respectfully, in your original question you implied that Elecraft
should
have done more to make the KPA1500 withstand an as yet, correctly
defined lightening event.  Again, respectfully, if you believe Elecraft
failed in some way, then you should say what, and how they failed...
Not imply they should have done more...  That is unfair.

With respect to the weekend-- I hope to see you in the 7QP contest!  I
will be on Sunday, but I fear the Sun will not assist much...  Take
care
my friend...

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net 
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/4/24 17:42, Jorge Diez - CX6VM wrote:
 > hi Dave
 >
 > I don't know what to tell you, I imagine that a direct discharge
into
 > the shack would have burned everything.
 >
 > I had 6 USB cables connected to the laptop, they burned the USB
of a box
 > of GHE that costs $160 and the USB of the KPA1500 that costs +$7000
 >
 > rotor controls and other PCs did not burn
 >
 > In short, it was the fear I had of buying new and sophisticated
 > equipment living so far from where the company is located.
 >
 > Have a good weekend
 >
 > 73,
 > Jorge
 > CX6VM/CW5W
 >
 > El sáb, 4 may 2024 a las 21:31, Dave (NK7Z) (mailto:d...@nk7z.net>
 > >>) escribió:
 >
 >     Hi Jorge,
 >
 >     That 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Jorge Diez - CX6VM]

Hi Dave

I have a panel like yours, each antenna to a discharger, on a copper sheet.
Nothing has happened with the coaxial and antenna switch

I have several rods that make the ground and a copper bar behind the desk
and all the equipment is connected to the ground

The lighting came through the antenna of my internet link, then it went to
the router, then to the computer where I have the kpa1500 connected with a
USB cable

My question about whether Elecraft could do more is whether there could be
something better than the USB it currently has, which seems to me to be a
simple USB connector, like that of any printer for example.

So there is my question, if for such an expensive piece of equipment, there
could be something of better quality, if not, I apologize, we will have to
live with these things.

See you in the bands!!!

Have a good weekend!

73,
Jorge
CX6VM/CW5W

El dom, 5 may 2024 a las 1:08, Dave (NK7Z) () escribió:

> Jorge,
>
> I can only go by what you said:
>
> "Last week I experienced a lightning strike"
>
> That sounds a lot like a direct discharge into the shack, so I am
> responding to your comment, if that is not correct, please help me
> understand what actually happened...
>
> Lightening is strange, it can take out one piece of equipment, and not
> touch another...  It all depends on how your shack is grounded, and how
> it is bonded.  When grounding commercial equipment, even the path the
> wire takes is important...  Curves, straight line runs, etc...
>
> What sort of ground system are you using, and what sort of lightening
> protection did you have in place at the time of the lightening event?
>
> Take a look at:
>
> https://www.nk7z.net/building-a-coax-entry-panel/
>
> That is my entry panel.  I am slowly building a ground ring around the
> house...  Why?  Because only I can build a system to help reduce the
> chances of lightening taking out something in my environment.  It is
> after all my home, and my environment, so I can not, and do not, hold
> Elecraft responsible for things they can not control.  Elecraft, can not
> be responsible for my grounding, and bonding practices.
>
> Respectfully, in your original question you implied that Elecraft should
> have done more to make the KPA1500 withstand an as yet, correctly
> defined lightening event.  Again, respectfully, if you believe Elecraft
> failed in some way, then you should say what, and how they failed...
> Not imply they should have done more...  That is unfair.
>
> With respect to the weekend-- I hope to see you in the 7QP contest!  I
> will be on Sunday, but I fear the Sun will not assist much...  Take care
> my friend...
>
> 73, and thanks,
> Dave (NK7Z)
> https://www.nk7z.net
> ARRL Volunteer Examiner
> ARRL Technical Specialist, RFI
> ARRL Asst. Director, NW Division, Technical Resources
>
> On 5/4/24 17:42, Jorge Diez - CX6VM wrote:
> > hi Dave
> >
> > I don't know what to tell you, I imagine that a direct discharge into
> > the shack would have burned everything.
> >
> > I had 6 USB cables connected to the laptop, they burned the USB of a box
> > of GHE that costs $160 and the USB of the KPA1500 that costs +$7000
> >
> > rotor controls and other PCs did not burn
> >
> > In short, it was the fear I had of buying new and sophisticated
> > equipment living so far from where the company is located.
> >
> > Have a good weekend
> >
> > 73,
> > Jorge
> > CX6VM/CW5W
> >
> > El sáb, 4 may 2024 a las 21:31, Dave (NK7Z) ( > >) escribió:
> >
> > Hi Jorge,
> >
> > That device would not stand a strike...  As per the US Weather
> service,
> > (https://www.weather.gov/safety/lightning-power
> > ), a typical
> lightening
> > bolt runs around 300,000,000 volts, at 30,000 amps.  That device is
> > speced for 4000 volts...
> >
> > For Elecraft to protect the amp against a lightening strike as you
> > described you had, they would need to add a LOT more hardware than
> that
> > to the price of an already expensive amp, and most people would never
> > see need the protection.  Hence why they don't even try and protect
> > against a direct lightening strike.
> >
> > The onus for lightening protection always rests with the device
> owner.
> >
> > 73, and thanks,
> > Dave (NK7Z)
> > https://www.nk7z.net 
> > ARRL Volunteer Examiner
> > ARRL Technical Specialist, RFI
> > ARRL Asst. Director, NW Division, Technical Resources
> >
> > On 5/4/24 16:36, Jorge Diez - CX6VM wrote:
> >  > Dave
> >  >
> >  > I am not an engineer and I don't know anything about electronics
> > either,
> >  > but I am very receptive to the solutions that many radio friends
> > give me.
> >  >
> >  > which made me think if the kpa1500 or k4 usb was built with
> > something
> >  > like this,
> >  >
> >
> 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Dave (NK7Z)]

Jorge,

I can only go by what you said:

"Last week I experienced a lightning strike"

That sounds a lot like a direct discharge into the shack, so I am 
responding to your comment, if that is not correct, please help me 
understand what actually happened...


Lightening is strange, it can take out one piece of equipment, and not 
touch another...  It all depends on how your shack is grounded, and how 
it is bonded.  When grounding commercial equipment, even the path the 
wire takes is important...  Curves, straight line runs, etc...


What sort of ground system are you using, and what sort of lightening 
protection did you have in place at the time of the lightening event?


Take a look at:

https://www.nk7z.net/building-a-coax-entry-panel/

That is my entry panel.  I am slowly building a ground ring around the 
house...  Why?  Because only I can build a system to help reduce the 
chances of lightening taking out something in my environment.  It is 
after all my home, and my environment, so I can not, and do not, hold 
Elecraft responsible for things they can not control.  Elecraft, can not 
be responsible for my grounding, and bonding practices.


Respectfully, in your original question you implied that Elecraft should 
have done more to make the KPA1500 withstand an as yet, correctly 
defined lightening event.  Again, respectfully, if you believe Elecraft 
failed in some way, then you should say what, and how they failed... 
Not imply they should have done more...  That is unfair.


With respect to the weekend-- I hope to see you in the 7QP contest!  I 
will be on Sunday, but I fear the Sun will not assist much...  Take care 
my friend...


73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/4/24 17:42, Jorge Diez - CX6VM wrote:

hi Dave

I don't know what to tell you, I imagine that a direct discharge into 
the shack would have burned everything.


I had 6 USB cables connected to the laptop, they burned the USB of a box 
of GHE that costs $160 and the USB of the KPA1500 that costs +$7000


rotor controls and other PCs did not burn

In short, it was the fear I had of buying new and sophisticated 
equipment living so far from where the company is located.


Have a good weekend

73,
Jorge
CX6VM/CW5W

El sáb, 4 may 2024 a las 21:31, Dave (NK7Z) (>) escribió:


Hi Jorge,

That device would not stand a strike...  As per the US Weather service,
(https://www.weather.gov/safety/lightning-power
), a typical lightening
bolt runs around 300,000,000 volts, at 30,000 amps.  That device is
speced for 4000 volts...

For Elecraft to protect the amp against a lightening strike as you
described you had, they would need to add a LOT more hardware than that
to the price of an already expensive amp, and most people would never
see need the protection.  Hence why they don't even try and protect
against a direct lightening strike.

The onus for lightening protection always rests with the device owner.

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net 
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/4/24 16:36, Jorge Diez - CX6VM wrote:
 > Dave
 >
 > I am not an engineer and I don't know anything about electronics
either,
 > but I am very receptive to the solutions that many radio friends
give me.
 >
 > which made me think if the kpa1500 or k4 usb was built with
something
 > like this,
 >
https://www.blackbox.com/en-ca/store/product/detail/USB-to-USB-Isolator-4-kV-1-Port/SP387A 

 >
 it might be beneficial or not, just thinking out loud
 >
 > 73,
 > Jorge
 > CX6VM/CW5W
 >
 > El sáb, 4 may 2024 a las 19:06, Dave (NK7Z) (mailto:d...@nk7z.net>
 > >>) escribió:
 >
 >     Jorge,
 >
 >     I would imagine if you approach Elecraft with that mindset, their
 >     thoughts will be you should take care of your own lightening
protection.
 >
 >     73, and thanks,
 >     Dave (NK7Z)
 > https://www.nk7z.net  >
 >     ARRL Volunteer Examiner
 >     ARRL Technical Specialist, RFI
 >     ARRL Asst. Director, NW Division, Technical Resources
 >
 >     On 5/4/24 09:10, Jorge Diez - CX6VM wrote:
 >      > Last week I experienced a lightning strike and the I/O
module of
 >    

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Fred Jensen]

Supported myself during college at the local TV station ... very late 
1950's. Station was on a ridge, we got lots of lightning strikes on our 
tower. The grounding ["earthing"] of the entire station was super 
extensive. We still occasionally lost equipment, mostly the smaller 
uwave equipment outside, despite the grounding.  Direct lightning 
strikes are so intense and large.  Lightning is also an RF event.  What 
happens in a near but safe place can create very large currents in 
nearby conductors.




73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

G4GNX wrote on 5/4/2024 5:45 PM:

Probably a great device, but why would Elecraft risk infringing someone else’s 
patent and increasing the price of the K4 by an extra $100, rather than letting 
the individual decide if they need and buy their own?

73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700





On 5 May 2024, at 00:36, Jorge Diez - CX6VM  wrote:

Dave

I am not an engineer and I don't know anything about electronics either,
but I am very receptive to the solutions that many radio friends give me.

which made me think if the kpa1500 or k4 usb was built with something like
this,
https://www.blackbox.com/en-ca/store/product/detail/USB-to-USB-Isolator-4-kV-1-Port/SP387A
it might be beneficial or not, just thinking out loud

73,
Jorge
CX6VM/CW5W

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6dg...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[G4GNX]

Probably a great device, but why would Elecraft risk infringing someone else’s 
patent and increasing the price of the K4 by an extra $100, rather than letting 
the individual decide if they need and buy their own?

73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700




> On 5 May 2024, at 00:36, Jorge Diez - CX6VM  wrote:
> 
> Dave
> 
> I am not an engineer and I don't know anything about electronics either,
> but I am very receptive to the solutions that many radio friends give me.
> 
> which made me think if the kpa1500 or k4 usb was built with something like
> this,
> https://www.blackbox.com/en-ca/store/product/detail/USB-to-USB-Isolator-4-kV-1-Port/SP387A
> it might be beneficial or not, just thinking out loud
> 
> 73,
> Jorge
> CX6VM/CW5W

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Jorge Diez - CX6VM]

hi Dave

I don't know what to tell you, I imagine that a direct discharge into the
shack would have burned everything.

I had 6 USB cables connected to the laptop, they burned the USB of a box of
GHE that costs $160 and the USB of the KPA1500 that costs +$7000

rotor controls and other PCs did not burn

In short, it was the fear I had of buying new and sophisticated equipment
living so far from where the company is located.

Have a good weekend

73,
Jorge
CX6VM/CW5W

El sáb, 4 may 2024 a las 21:31, Dave (NK7Z) () escribió:

> Hi Jorge,
>
> That device would not stand a strike...  As per the US Weather service,
> (https://www.weather.gov/safety/lightning-power), a typical lightening
> bolt runs around 300,000,000 volts, at 30,000 amps.  That device is
> speced for 4000 volts...
>
> For Elecraft to protect the amp against a lightening strike as you
> described you had, they would need to add a LOT more hardware than that
> to the price of an already expensive amp, and most people would never
> see need the protection.  Hence why they don't even try and protect
> against a direct lightening strike.
>
> The onus for lightening protection always rests with the device owner.
>
> 73, and thanks,
> Dave (NK7Z)
> https://www.nk7z.net
> ARRL Volunteer Examiner
> ARRL Technical Specialist, RFI
> ARRL Asst. Director, NW Division, Technical Resources
>
> On 5/4/24 16:36, Jorge Diez - CX6VM wrote:
> > Dave
> >
> > I am not an engineer and I don't know anything about electronics either,
> > but I am very receptive to the solutions that many radio friends give me.
> >
> > which made me think if the kpa1500 or k4 usb was built with something
> > like this,
> >
> https://www.blackbox.com/en-ca/store/product/detail/USB-to-USB-Isolator-4-kV-1-Port/SP387A
> <
> https://www.blackbox.com/en-ca/store/product/detail/USB-to-USB-Isolator-4-kV-1-Port/SP387A>
> it might be beneficial or not, just thinking out loud
> >
> > 73,
> > Jorge
> > CX6VM/CW5W
> >
> > El sáb, 4 may 2024 a las 19:06, Dave (NK7Z) ( > >) escribió:
> >
> > Jorge,
> >
> > I would imagine if you approach Elecraft with that mindset, their
> > thoughts will be you should take care of your own lightening
> protection.
> >
> > 73, and thanks,
> > Dave (NK7Z)
> > https://www.nk7z.net 
> > ARRL Volunteer Examiner
> > ARRL Technical Specialist, RFI
> > ARRL Asst. Director, NW Division, Technical Resources
> >
> > On 5/4/24 09:10, Jorge Diez - CX6VM wrote:
> >  > Last week I experienced a lightning strike and the I/O module of
> > my KPA1500
> >  > was damaged, what has Elecraft thought to ensure that the
> > equipment is not
> >  > damaged?
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > 
> > Help: http://mailman.qth.net/mmfaq.htm
> > 
> > Post: mailto:Elecraft@mailman.qth.net  Elecraft@mailman.qth.net>
> >
> > This list hosted by: http://www.qsl.net 
> > Please help support this email list: http://www.qsl.net/donate.html
> > 
> > Message delivered to cx6vm.jo...@gmail.com
> > 
> >
> >
> >
> > --
> > 73,
> > Jorge
> > CX6VM/CW5W
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com



-- 
73,
Jorge
CX6VM/CW5W
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Dave (NK7Z)]

Hi Jorge,

That device would not stand a strike...  As per the US Weather service, 
(https://www.weather.gov/safety/lightning-power), a typical lightening 
bolt runs around 300,000,000 volts, at 30,000 amps.  That device is 
speced for 4000 volts...


For Elecraft to protect the amp against a lightening strike as you 
described you had, they would need to add a LOT more hardware than that 
to the price of an already expensive amp, and most people would never 
see need the protection.  Hence why they don't even try and protect 
against a direct lightening strike.


The onus for lightening protection always rests with the device owner.

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/4/24 16:36, Jorge Diez - CX6VM wrote:

Dave

I am not an engineer and I don't know anything about electronics either, 
but I am very receptive to the solutions that many radio friends give me.


which made me think if the kpa1500 or k4 usb was built with something 
like this, 
https://www.blackbox.com/en-ca/store/product/detail/USB-to-USB-Isolator-4-kV-1-Port/SP387A  it might be beneficial or not, just thinking out loud


73,
Jorge
CX6VM/CW5W

El sáb, 4 may 2024 a las 19:06, Dave (NK7Z) (>) escribió:


Jorge,

I would imagine if you approach Elecraft with that mindset, their
thoughts will be you should take care of your own lightening protection.

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net 
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/4/24 09:10, Jorge Diez - CX6VM wrote:
 > Last week I experienced a lightning strike and the I/O module of
my KPA1500
 > was damaged, what has Elecraft thought to ensure that the
equipment is not
 > damaged?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft@mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html

Message delivered to cx6vm.jo...@gmail.com




--
73,
Jorge
CX6VM/CW5W

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Jorge Diez - CX6VM]

Dave

I am not an engineer and I don't know anything about electronics either,
but I am very receptive to the solutions that many radio friends give me.

which made me think if the kpa1500 or k4 usb was built with something like
this,
https://www.blackbox.com/en-ca/store/product/detail/USB-to-USB-Isolator-4-kV-1-Port/SP387A
it might be beneficial or not, just thinking out loud

73,
Jorge
CX6VM/CW5W

El sáb, 4 may 2024 a las 19:06, Dave (NK7Z) () escribió:

> Jorge,
>
> I would imagine if you approach Elecraft with that mindset, their
> thoughts will be you should take care of your own lightening protection.
>
> 73, and thanks,
> Dave (NK7Z)
> https://www.nk7z.net
> ARRL Volunteer Examiner
> ARRL Technical Specialist, RFI
> ARRL Asst. Director, NW Division, Technical Resources
>
> On 5/4/24 09:10, Jorge Diez - CX6VM wrote:
> > Last week I experienced a lightning strike and the I/O module of my
> KPA1500
> > was damaged, what has Elecraft thought to ensure that the equipment is
> not
> > damaged?
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com
>


-- 
73,
Jorge
CX6VM/CW5W
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[G4GNX]

I can’t see where a more robust USB connector would affect remote operation via 
a LAN cable.

Better isolation can be obtained by installing a WiFi dongle.

73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700




> On 4 May 2024, at 17:57, Jorge Diez - CX6VM  wrote:
> 
> of course that we need to take care of many things, very good grounding, gas 
> arrestors, single antenna grounding panel, etc, etc
> 
> but, after my bad experience, I expect that a expensive product that is 
> designed, in many cases, to be installed remotely, has been, for example on 
> the USB connector, built with an industrial USB to USB isolator, and not just 
> a cheap printer´s USB connector
> 
> 73,
> Jorge
> CX6VM/CW5W

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Dave (NK7Z)]

Jorge,

I would imagine if you approach Elecraft with that mindset, their 
thoughts will be you should take care of your own lightening protection.


73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/4/24 09:10, Jorge Diez - CX6VM wrote:

Last week I experienced a lightning strike and the I/O module of my KPA1500
was damaged, what has Elecraft thought to ensure that the equipment is not
damaged?

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: Station design

[Rick NK7I]

 * Elecraft has no control in how one sets up (or uses) a station.
 * A remote station needs all of the same protection enjoyed by any
   other station; they are the same except one is used remotely.

On the last premise; set up the remote station as if it were any other 
station; RFI and noise mitigation, generator back up power, UPS, 
lightning protection*; GROUNDING AND BONDING, heating and (!) cooling 
(!); again just like any station should appear and operate (even if it's 
stuffed into a closet).


The power supply system should provide for continuous power to the 
network too.  It's MORE important if the station is intended for remote 
ops.  The control operator (local or remote) is required to have FULL 
control over the station operations; plan for worst case events that 
would affect that; loss of network is a key consideration for remote use.


[I have a lot of UPS, one per mesh node included, for the approx one 
minute until the generator switches in upon power failure and one  UPS 
per computer power source to keep the services I provide, online.  
Simply because Starlink and the network takes over ten minutes to 
re-establish with a power loss.  That's a long key down time!]


It is up to the USER (remote in particular) to operate the station 
(remote or local) in a way that does not cause harm (on the air or 
through ab/use).  This means small things like making sure the 
transmitter is not locked on (CW key down, FSK transmit) in the event of 
a network fail so it cannot be unkeyed (use of VOX or macros and memory 
use for sending non-phone message strings)


That's nothing new.  A remote station, is just another station with the 
same needs and planning as any other station; except the goal is to use 
it remotely and the ability to control it at all times during use.


73,
Rick nk7i

* Lightning protection how-to or discussion is beyond the scope of this 
group, but EVERY STATION should have a system in place WITH grounding 
and bonding of every item in the shack, includes every wire that enters 
the building (cable TV, phone, power, DSL) or that sticks into the air 
for radio (tower/mast, sat dishes, antennas).


Even if the station location rarely has lightning.  Properly done, the 
protection system would also help static buildup, from rain, wind, snow, 
dust or any other cause.  Static discharge cause is more than lightning 
and can also damage (or destroy) equipment.


Even then, a direct hit may not save the station but it will show what 
was NOT properly taken care of, what was missed in the protection system.


In some cases, it can even lower the noise floor (MAY, not will).


On 5/4/2024 9:36 AM, G4GNX wrote:

I don’t think you can expect Elecraft to take care of any safety issues, 
especially with lightning.

You could install a remote camera to keep an eye on things, along with smoke 
detectors and some form of extinguisher, such as those now available for 3D 
printers.
To protect from lightning, you’d need to install antenna switches which can be 
controlled either automatically or remotely.
You also need to install lightning arrestors.
Of course all of this won’t prevent damage if you get a direct strike.
To internally protect a K4 or any other Elecraft product is just downright 
impossible.
“Acts of God” are just what they are and mostly out of our control.

73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700





On 4 May 2024, at 17:10, Jorge Diez - CX6VM  wrote:

Wayne

What worries me is having a very expensive device like a K4 connected in a
remote place, to the antennas, power and internet

How to avoid damage to the equipment?

Last week I experienced a lightning strike and the I/O module of my KPA1500
was damaged, what has Elecraft thought to ensure that the equipment is not
damaged?

With the remote K3, what was connected to the network was the remoterig,
with the K4 what is connected to the network is a device worth more than
6000 dollars

So, since the I/O module does not have sufficient protections, what is
Elecraft's recommendation to protect them?

thanks,
Jorge
CX6VM/CW5W

__
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:Elecraft@mailman.qth.net

This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered torick.n...@gmail.com  

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Jorge Diez - CX6VM]

of course that we need to take care of many things, very good grounding,
gas arrestors, single antenna grounding panel, etc, etc

but, after my bad experience, I expect that a expensive product that is
designed, in many cases, to be installed remotely, has been, for example on
the USB connector, built with an industrial USB to USB isolator, and not
just a cheap printer´s USB connector

73,
Jorge
CX6VM/CW5W

El sáb, 4 may 2024 a las 13:37, G4GNX () escribió:

> I don’t think you can expect Elecraft to take care of any safety issues,
> especially with lightning.
>
> You could install a remote camera to keep an eye on things, along with
> smoke detectors and some form of extinguisher, such as those now available
> for 3D printers.
> To protect from lightning, you’d need to install antenna switches which
> can be controlled either automatically or remotely.
> You also need to install lightning arrestors.
> Of course all of this won’t prevent damage if you get a direct strike.
> To internally protect a K4 or any other Elecraft product is just downright
> impossible.
> “Acts of God” are just what they are and mostly out of our control.
>
> 73,
> Alan - G4GNX
> South Coast UK
> Elecraft K4D / KPA500 / KAT500 / IC-9700
>
>
>
>
> > On 4 May 2024, at 17:10, Jorge Diez - CX6VM 
> wrote:
> >
> > Wayne
> >
> > What worries me is having a very expensive device like a K4 connected in
> a
> > remote place, to the antennas, power and internet
> >
> > How to avoid damage to the equipment?
> >
> > Last week I experienced a lightning strike and the I/O module of my
> KPA1500
> > was damaged, what has Elecraft thought to ensure that the equipment is
> not
> > damaged?
> >
> > With the remote K3, what was connected to the network was the remoterig,
> > with the K4 what is connected to the network is a device worth more than
> > 6000 dollars
> >
> > So, since the I/O module does not have sufficient protections, what is
> > Elecraft's recommendation to protect them?
> >
> > thanks,
> > Jorge
> > CX6VM/CW5W
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com



-- 
73,
Jorge
CX6VM/CW5W
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[G4GNX]

I don’t think you can expect Elecraft to take care of any safety issues, 
especially with lightning.

You could install a remote camera to keep an eye on things, along with smoke 
detectors and some form of extinguisher, such as those now available for 3D 
printers.
To protect from lightning, you’d need to install antenna switches which can be 
controlled either automatically or remotely.
You also need to install lightning arrestors.
Of course all of this won’t prevent damage if you get a direct strike.
To internally protect a K4 or any other Elecraft product is just downright 
impossible.
“Acts of God” are just what they are and mostly out of our control.

73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700




> On 4 May 2024, at 17:10, Jorge Diez - CX6VM  wrote:
> 
> Wayne
> 
> What worries me is having a very expensive device like a K4 connected in a
> remote place, to the antennas, power and internet
> 
> How to avoid damage to the equipment?
> 
> Last week I experienced a lightning strike and the I/O module of my KPA1500
> was damaged, what has Elecraft thought to ensure that the equipment is not
> damaged?
> 
> With the remote K3, what was connected to the network was the remoterig,
> with the K4 what is connected to the network is a device worth more than
> 6000 dollars
> 
> So, since the I/O module does not have sufficient protections, what is
> Elecraft's recommendation to protect them?
> 
> thanks,
> Jorge
> CX6VM/CW5W

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Jorge Diez - CX6VM]

Wayne

What worries me is having a very expensive device like a K4 connected in a
remote place, to the antennas, power and internet

How to avoid damage to the equipment?

Last week I experienced a lightning strike and the I/O module of my KPA1500
was damaged, what has Elecraft thought to ensure that the equipment is not
damaged?

With the remote K3, what was connected to the network was the remoterig,
with the K4 what is connected to the network is a device worth more than
6000 dollars

So, since the I/O module does not have sufficient protections, what is
Elecraft's recommendation to protect them?

thanks,
Jorge
CX6VM/CW5W

El sáb, 4 may 2024 a las 12:41, Wayne Burdick ()
escribió:

> Now that Remote is available to all K4 owners, we'd love to hear how
> you're using it.
>
> For me, Remote has added an unexpected new dimension to HF QRP operation.
>
> At my home station in the SF Bay area, I have a mediocre antenna farm (OCF
> dipole and a 16' vertical). Nothing rotates. Nothing changes length at the
> touch of a button. Birds who fly through my near-field live to tell their
> young.
>
> Worse, I'm at the mercy of my electrically noisy neighbors.
>
> Fortunately, I have a friend who lives 800 miles north of my QTH. He has
> huge directive antennas on a massive tower, not to mention an unbelievably
> low noise floor. I've been envious of his riparian RF ecosystem for years,
> mine being a desert in comparison.
>
> Now, using K4 Remote, I can virtually operate his station whenever he (or
> someone else) isn't using it. And since I'm controlling his K4 with my own,
> there's no difference in the UI or feature set. I've still got three
> 400-count optical encoders for VFO A, B, and RIT/XIT; QSK CW with AFX
> stereo; all the same computer and software interfaces, and his high-res
> panadapter on my LCD and HDMI monitor.
>
> (It's not just the next best thing to being there. It *is* being there.)
>
> Once he installed the new beta release, I kicked off a new effort: 1-watt
> CW DXCC. With his antennas, it shouldn't take long.
>
> For example, the other day I was tuning around 20 meters locally (i.e.,
> using my own antenna) and heard only a few EU stations, peaking around S5.
> Three seconds later I was using my friend's station -- the band was now
> wall-to-wall S9+ DX. I dialed his radio down to 1 Watt and immediately
> picked up a few new ones.
>
> While many K4 owners will be using Remote with KPA1500s, chasing top spots
> in contests and adding to their 300+ country totals, some of us will be
> nibbling at the fringes, like so many cleaner wrasses on a great white. I
> hope to hear these stories, as well.
>
> 73,
> Wayne
> N6KR
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to cx6vm.jo...@gmail.com
>


-- 
73,
Jorge
CX6VM/CW5W
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

[Wayne Burdick]

Now that Remote is available to all K4 owners, we'd love to hear how you're 
using it. 

For me, Remote has added an unexpected new dimension to HF QRP operation.

At my home station in the SF Bay area, I have a mediocre antenna farm (OCF 
dipole and a 16' vertical). Nothing rotates. Nothing changes length at the 
touch of a button. Birds who fly through my near-field live to tell their young.

Worse, I'm at the mercy of my electrically noisy neighbors.

Fortunately, I have a friend who lives 800 miles north of my QTH. He has huge 
directive antennas on a massive tower, not to mention an unbelievably low noise 
floor. I've been envious of his riparian RF ecosystem for years, mine being a 
desert in comparison.

Now, using K4 Remote, I can virtually operate his station whenever he (or 
someone else) isn't using it. And since I'm controlling his K4 with my own, 
there's no difference in the UI or feature set. I've still got three 400-count 
optical encoders for VFO A, B, and RIT/XIT; QSK CW with AFX stereo; all the 
same computer and software interfaces, and his high-res panadapter on my LCD 
and HDMI monitor.

(It's not just the next best thing to being there. It *is* being there.)

Once he installed the new beta release, I kicked off a new effort: 1-watt CW 
DXCC. With his antennas, it shouldn't take long. 

For example, the other day I was tuning around 20 meters locally (i.e., using 
my own antenna) and heard only a few EU stations, peaking around S5. Three 
seconds later I was using my friend's station -- the band was now wall-to-wall 
S9+ DX. I dialed his radio down to 1 Watt and immediately picked up a few new 
ones.

While many K4 owners will be using Remote with KPA1500s, chasing top spots in 
contests and adding to their 300+ country totals, some of us will be nibbling 
at the fringes, like so many cleaner wrasses on a great white. I hope to hear 
these stories, as well.

73,
Wayne
N6KR



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 REMOTE & OTHER FEATURES now available -- Release R36.BETA2

[Wayne Burdick]

[Repeating posting from this morning, since we quickly updated from BETA1 to 
BETA2 to correct a bug -- Wayne, N6KR.]

With the release of beta version R36.BETA2, our long-anticipated K4 Remote 
feature is now available to all K4 owners. A K4 can be either a client radio or 
a server radio, with no additional hardware or software needed beyond an 
Internet router at each end.

K4 field testers, who have helped us refine and test the Remote experience over 
several months, have described K4 Remote as a "game-changer" and "very easy to 
use." Now we're anxious to help everyone else who's interested in Remote get 
started. 

All we ask is that you Read The Manual :) The K4 operating manual has been 
updated with a chapter on Remote setup and operation. You can find it on the 
radio itself by tapping the "?" button, or on our K4 manuals web page. 

An introductory excerpt from the manual appears below. 

Other new features include:

- "RX AUDIO GAIN BOOST" MENU ENTRY:  This menu entry allows users who prefer 
high overall audio output to specify additional gain.

- AGC THRESHOLD can now be set to values 2 and 3. These lower thresholds may be 
useful for those who prefer more aggressive AGC on weaker signals, such as on 
quiet bands or with preamps OFF.

- DIVERSITY-ON BUG FIX: When diversity is turned on, we no longer copy preamp, 
attenuator, or RF gain settings from VFO A to VFO B. This was creating extra 
work for operators, especially on 160 m. (Also applies on band change with 
diversity already ON.)

- FSK TRANSMIT BANDWIDTH NOW MUCH NARROWER: Now using controlled sigmoidal 
tone-shift method to greatly reduce FSK TX bandwidth. 

Full release notes are attached. 

73,
Wayne
N6KR



Remote Front Panel Emulation -- Overview


Remote front panel emulation is typically used to access a server K4 from 
another location at your home or property, or one at a location with better 
antennas or propagation. This remote server radio may be your own, or one 
anywhere else in the world that another operator has allowed you to use (by 
prearrangement). A client device is used to emulate the front panel of the 
server radio, as if you were at the server location. Instead, you might be at 
your home, in a hotel room, in an RV – or virtually anywhere network 
connectivity is available. 

The K4's implementation of remote makes such operation simple, seamless, and 
immersive. You'll have complete control over the distant station. No special 
interface devices are needed – just a router at each end. There is also no need 
to change your K4's cabling for computer logging, data modes, etc. The client 
seamlessly routes commands, data, and audio from these to the server as 
required. 

Several client devices and applications are supported: (1) another K4, (2) our 
K4/0** compact front-panel unit, or (3) our VK4 Windows application**, or (4) a 
third-party iOS** application. Other apps and platforms may be available in the 
future. (**In development.) 

A K4 used as a client can be disconnected from the server, when desired, to use 
the radio with local antennas. The K4/0 is a control-only device (no RF), with 
the same display, knobs, and switches as the K4 itself, in an enclosure just 4" 
deep. 



==
== R36.BETA2 =
==

May 3, 2024

---
BUG FIX
---

- NON-FT RADIOS UNABLE TO DO REMOTE CONNECTION: In rev R36.BETA1, one of the 
Remote host commands ("RRT;") was blocked for non-FT radios.


NEW FEATURES


- REMOTE SETTINGS BUTTON ADDED TO LCD: There's a new button ("globe" icon) in 
the lower left-hand corner of the LCD, next to the "?" (INFO) button. Tap this 
to access the client or server settings screens. Refer to the REMOTE feature 
details below, and the REMOTE section of the manual, for details on client and 
server setup.

- REMOTE FRONT PANEL EMULATION (AKA "REMOTE"): The new Remote feature allows 
you to easily control a K4 transceiver anywhere in the world over the Internet. 
The K4 can act as either a client or server, and no additional hardware or 
interface devices are required beyond a router at each end. Additional client 
devices and software are in development, including our K4/0 remote front panel 
unit, VK4 Windows application, and a third-party iOS app. (Additional client 
software applications may be developed in the future, thanks to the K4's large 
host command set and streaming capability.) 

- REMOTE FRONT PANEL EMULATION DOCUMENTATION: The latest K4 operating manual 
includes a comprehensive section on setting up Remote. Please read this section 
carefully if you plan to use your K4 as a Remote server or client. To get to 
the REMOTE section, start at the Table of Contents (under "III. Operation"), 
then click on REMOTE near the bottom of the list.

[Elecraft] K4 REMOTE & OTHER FEATURES now available -- Release R36.BETA1

[Wayne Burdick]

With the release of beta version R36.BETA1, our long-anticipated K4 Remote 
feature is now available to all K4 owners. A K4 can be either a client radio or 
a server radio, with no additional hardware or software needed beyond an 
Internet router at each end.

K4 field testers, who have helped us refine and test the Remote experience over 
several months, have described K4 Remote as a "game-changer" and "very easy to 
use." Now we're anxious to help everyone else who's interested in Remote get 
started. 

All we ask is that you Read The Manual :) The K4 operating manual has been 
updated with a chapter on Remote setup and operation. You can find it on the 
radio itself by tapping the "?" button, or on our K4 manuals web page. 

An introductory excerpt from the manual appears below. 

Other new features include:

- "RX AUDIO GAIN BOOST" MENU ENTRY:  This menu entry allows users who prefer 
high overall audio output to specify additional gain.

- AGC THRESHOLD can now be set to values 2 and 3. These lower thresholds may be 
useful for those who prefer more aggressive AGC on weaker signals, such as on 
quiet bands or with preamps OFF.

- DIVERSITY-ON BUG FIX: When diversity is turned on, we no longer copy preamp, 
attenuator, or RF gain settings from VFO A to VFO B. This was creating extra 
work for operators, especially on 160 m. (Also applies on band change with 
diversity already ON.)

- FSK TRANSMIT BANDWIDTH NOW MUCH NARROWER: Now using controlled sigmoidal 
tone-shift method to greatly reduce FSK TX bandwidth. 

Full release notes are attached. 

73,
Wayne
N6KR



Remote Front Panel Emulation -- Overview


Remote front panel emulation is typically used to access a server K4 from 
another location at your home or property, or one at a location with better 
antennas or propagation. This remote server radio may be your own, or one 
anywhere else in the world that another operator has allowed you to use (by 
prearrangement). A client device is used to emulate the front panel of the 
server radio, as if you were at the server location. Instead, you might be at 
your home, in a hotel room, in an RV – or virtually anywhere network 
connectivity is available. 

The K4's implementation of remote makes such operation simple, seamless, and 
immersive. You'll have complete control over the distant station. No special 
interface devices are needed – just a router at each end. There is also no need 
to change your K4's cabling for computer logging, data modes, etc. The client 
seamlessly routes commands, data, and audio from these to the server as 
required. 

Several client devices and applications are supported: (1) another K4, (2) our 
K4/0** compact front-panel unit, or (3) our VK4 Windows application**, or (4) a 
third-party iOS** application. Other apps and platforms may be available in the 
future. (**In development.) 

A K4 used as a client can be disconnected from the server, when desired, to use 
the radio with local antennas. The K4/0 is a control-only device (no RF), with 
the same display, knobs, and switches as the K4 itself, in an enclosure just 4" 
deep. 


==
== R36.BETA1 =
==

May 3, 2024


NEW FEATURES


- REMOTE SETTINGS BUTTON ADDED TO LCD: There's a new button ("globe" icon) in 
the lower left-hand corner of the LCD, next to the "?" (INFO) button. Tap this 
to access the client or server settings screens. Refer to the REMOTE feature 
details below, and the REMOTE section of the manual, for details on client and 
server setup.

- REMOTE FRONT PANEL EMULATION (AKA "REMOTE"): The new Remote feature allows 
you to easily control a K4 transceiver anywhere in the world over the Internet. 
The K4 can act as either a client or server, and no additional hardware or 
interface devices are required beyond a router at each end. Additional client 
devices and software are in development, including our K4/0 remote front panel 
unit, VK4 Windows application, and a third-party iOS app. (Additional client 
software applications may be developed in the future, thanks to the K4's large 
host command set and streaming capability.) 

- REMOTE FRONT PANEL EMULATION DOCUMENTATION: The latest K4 operating manual 
includes a comprehensive section on setting up Remote. Please read this section 
carefully if you plan to use your K4 as a Remote server or client. To get to 
the REMOTE section, start at the Table of Contents (under "III. Operation"), 
then click on REMOTE near the bottom of the list.

- "TX MONITOR LEVEL, REMOTE" MENU ENTRY: This menu entry sets Remote TX monitor 
audio level *only* for CW M1..M4 message play and FSK/PSK tones. It does not 
affect normal paddle-sent CW sidetone in Remote, which is regenerated locally 
at the client K4.

- "RX AUDIO GAIN BOOST" 

[Elecraft] [Elecraft-K4] Elecraft 40M SSB Net Report

[Dave New, N8SBE]

[Edited. Reason: Changed K8NU's name from Eric to Carl (sorry about 
that).]


7280 kHz, 1900 UTC Sunday.

Steve, WM6P, the usual NCS, was absent this week, so Dave, N8SBE took 
the net with Brian's, K1NW, assist as a relay station.


Thanks to the following check ins (w) and relays (rel):

   Call   State Radio/Amp Name
1  N8SBE  MIK4D/KPA500Dave (w),(op)
2  K1NW   RIK4D/KPA500Brian (rel),(w)
3  K8NU   OHK4D/KPA1500   Carl (w)
4  W9EJB  INK4D/KPA500Ed (w)
5  NK9A   MIFT710/SB-200  Stan (w)
6  WA8SAJ OHK4D/KPA500Jeff (w)

(Entries with (c/o) indicate a 'one and done' station that checked out 
during the 1st round. (n/h) failed to respond during subsequent rounds.)


We had a total of 6 check ins this week (including the NCS). Thanks to 
the relay stations that helped this afternoon. Very nice hearing from 
everyone today, in spite of the double whammy of C-Class flares in the 
last couple of hours, resulting in an A index of 12. 40M was essentially 
dead. Hopefully we'll have better propagation next week. I hope to see 
all of you again. The net concluded at 19:11 UTC.


We have a really great group of folks checking in, and I encourage 
everyone in the Eastern US and adjoining areas to check in next week.


73,

-- Dave, N8SBE


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#31343): 
https://groups.io/g/Elecraft-K4/message/31343

Mute This Topic: https://groups.io/mt/105788264/439435
Group Owner: elecraft-k4+ow...@groups.io
Unsubscribe: 
https://groups.io/g/Elecraft-K4/leave/12322551/439435/1385384913/xyzzy 
[n8...@densbe.com]

-=-=-=-=-=-=-=-=-=-=-=-


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4/0 control unit at Visalia

[Wayne Burdick]

If you’re at Visalia today, please drop by to check out our early prototype of 
the K4/0. This unit has a front panel identical to the K4’s, but it’s only 4” 
deep. It’s ideal for remote control of your K4 (or a friend’s) when space is 
limited.

Full technical details will be provided later.

 73,
Wayne
N6KR




elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] The Elecraft K4 has been sold

[George Danner]

73 George AI4VZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft K4 for sale

[George Danner]

I'm selling my Elecraft K4 (not a "D"). D upgrade is available from
Elecraft.
It is 2 years old with an ATU.
$4,100 shipped and insured to Continental US in original boxes.

Due to current conditions, refunds are not available.

Details and photos on request.

73 George AI4VZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft K4 Raffle & St. Patrick's Day Hamfest

[Alan Sewell N5NA]

In conjunction with the St. Patrick's Day Hamfest the Midland Amateur 
Radio Club is raffling an Elecraft K4 transceiver with MH4 mic.


A maximum of 400 tickets will be sold at $20 each.  There are currently 
100 tickets left.  The drawing will be held on Saturday, March 16, 2024.


For more information please visit <https://hamfest.w5qgg.org/>.

73, Alan N5NA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 Remote Sneak Peek

[Rick Tavan]

My sneak peek article on K4 Remote in the January issue of CWops'
newsletter *Solid Copy* is up now. See https://cwops.org/newsletters/ and
scroll down a bit to Solid Copy No. 168.

If you're a CW operator and not yet a member of CWops, you might want to
consider joining!

73,

/Rick N6XI

--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Gregory Mitchell]

This is why Elecraft needs to get serious about having IPv6 support in the K4. 
Because of stateless auto config, a minimal support would just be to enable 
stateless auto config on the network interface and provide the ipv6 address on 
the menu as readonly.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[John Canfield]

I was behind a *double* NAT until I got a static IP but in the meantime 
I setup a reverse SSH tunnel It's been several years since that but it's 
a real pain to setup and keep connected. Finding a host provider that 
would permit a reverse tunnel is a challenge, few will do this.


John WB5THT

On 12/15/2023 11:57 AM, elecraft-requ...@mailman.qth.net wrote:

Message: 14
Date: Fri, 15 Dec 2023 15:57:57 +0100
From: Magnus Danielson
To:elecraft@mailman.qth.net
Subject: Re: [Elecraft] K4 Remote Lives and Breathes!
Message-ID:
Content-Type: text/plain; charset=UTF-8; format=flowed

This issue is real. A problem is also there is quite many port forward
configurations to setup as one setup a station.

There is methods to punch through NATs, and I hope one have chosen to
use an approach that does this. One is to operate over a VPN that have
these abilities. Another is to use a standard tunnel usinging say TLS
that also include the punch-through capabilities.

Also, IPv6 is starting to replace the IPv4 NAT/CG-NAT hell. It's been a
long coming for sure, but there is plenty of signs it is happening.
While initial release may be IPv4 limited, IPv6 should be high up on the
list of thigns to fix if it is not already handled. This should not be
relevant only for the K4, but any device.

When wearing another set of hats, I work on these issues.

73 Magnus SA0MAD

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Rick NK7I]

As (other) Rick says, port forwarding varies between routers; but the 
two key points to research for your router are:


1)  Assign (reserve) the K4 MAC(s) to specific IP addresses, so the 
K4(s) is/are ALWAYS at the same LAN IP address (reboot the K4).
2)  Port forward 9204 to the K4 (only one can be shared with the 
outside, if more than one K4 on the LAN) IP address.


You may want to make sure that a password is made within the K4 (instead 
of anyone) so you have some access control.


If you have (like me) Starlink or other CGNAT using ISP, then it gets 
more complicated and probably isn't a topic to be discussed on this list.


Across my Starlink LAN (I have two LAN), it's working beautifully and 
should be available 'real soon now' for public beta... have some 
patience yet while the field test team runs it through it's paces and 
some spit and polish are applied.


73,
Rick nk7i

On 12/15/2023 10:25 AM, Rick Tavan wrote:
Simplicity is the keynote to K4 Remote. If you have an external IP 
address, you only have to fill in a few fields to get going. You do 
have to set up a "port forward" rule in your router in order to make 
YOUR K4 accessible to remote control ops. All the routers have 
different web pages to do this but they're pretty simple to navigate. 
Mostly. ;-)  If all you want to do is control remote K4's, you only 
have to type in their address and, if established, password. It really 
couldn't be easier.


/Rick N6XI

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Rick Tavan]

Simplicity is the keynote to K4 Remote. If you have an external IP address, you only have 
to fill in a few fields to get going. You do have to set up a "port forward" 
rule in your router in order to make YOUR K4 accessible to remote control ops. All the 
routers have different web pages to do this but they're pretty simple to navigate. 
Mostly. ;-)  If all you want to do is control remote K4's, you only have to type in their 
address and, if established, password. It really couldn't be easier.

/Rick N6XI

On 12/15/23 10:08 AM, Lou Laderman wrote:

I’m not particularly networking savvy, in fact I’m at the opposite end of 
networking familiarity. I’ve contacted Wayne a few times to ask that the K4 
remote solution (whether K4/K4-0 or VK4 software) follow the KISS principle and 
make connectivity simple enough for someone like me. I’m hoping I won’t have to 
try to figure out tunneling, setting up a VPN or any of the other alphabet soup 
solutions that quickly turn into blah blah blah for me.

73, Lou W0FK


Lou Laderman
Sent from my mobile device

On Dec 15, 2023, at 11:57 AM, Rick Tavan  wrote:

Thanks, Adrian. I didn't realize how ubiquitous that technique is becoming.
I guess I live a sheltered life here in the mountains and, of course, in
Silicon Valley. I hope your solutions don't add unacceptable latency.

/Rick N6XI

On Fri, Dec 15, 2023 at 9:46 AM KJ7SOY  wrote:


Rick:

The problem is not dynamic IP addresses changing. That’s easy to fix. It’s
CG-NAT (Carrier Grade Network Address Translation), which doesn’t give you
an external world addressable IP address. You can’t assign a DDNS name
because you don’t HAVE an IP address to map to. Many carriers (T-Mobile is
a perfect example) are now using this approach, which blocks customers from
getting to their devices/services from outside their home networks.

The only solution is to use a commercial tunneling VPN or a free service
like ngrok, which creates a permanent tunnel to external servers which DO
have addressable IP addresses.

73, Adrian



On Dec 15, 2023, at 9:20 AM, Rick Tavan  wrote:

Hi, Dave. I don't think it will be much of an issue. With many ISPs,
external IP addresses change rarely. If your ISP is changing addresses
frequently, consider using a DDNS server like no-ip.com. I have tested

K4

Remote using a DDNS string in lieu of a hard-coded WAN address and it

works

fine.

/Rick N6XI


On Fri, Dec 15, 2023 at 1:44 AM Dave  wrote:

Very interesting Rick, thanks for sharing the info.

One issue that seems to be increasingly common is that some (many?)

ISPs no

longer offer a fixed IP address, which K4 Remote currently needs. The
system many ISPs are changing to is carrier grade network address
translation, it first surfaced in mobile networks, but is spreading to

home

broadband too as ISPs run out of IPv4 addresses, see:
https://en.wikipedia.org/wiki/Carrier-grade_NAT

A way around this is with the use of a central server, which isn't

usually

free. Remote TX works in this way but uses a Raspberry Pi. I note they
support the K3.https://www.remotetx.net/

73 Dave G4AON
__
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:Elecraft@mailman.qth.net

This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered torta...@gmail.com



--
--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:Elecraft@mailman.qth.net

This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered tokj7...@gmail.com


--
--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:Elecraft@mailman.qth.net

This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered tollader...@icloud.com


--
Rick Tavan, Saratoga & Truckee, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Lou Laderman via Elecraft]

I’m not particularly networking savvy, in fact I’m at the opposite end of 
networking familiarity. I’ve contacted Wayne a few times to ask that the K4 
remote solution (whether K4/K4-0 or VK4 software) follow the KISS principle and 
make connectivity simple enough for someone like me. I’m hoping I won’t have to 
try to figure out tunneling, setting up a VPN or any of the other alphabet soup 
solutions that quickly turn into blah blah blah for me.

73, Lou W0FK


Lou Laderman
Sent from my mobile device 

On Dec 15, 2023, at 11:57 AM, Rick Tavan  wrote:

Thanks, Adrian. I didn't realize how ubiquitous that technique is becoming.
I guess I live a sheltered life here in the mountains and, of course, in
Silicon Valley. I hope your solutions don't add unacceptable latency.

/Rick N6XI

On Fri, Dec 15, 2023 at 9:46 AM KJ7SOY  wrote:

> Rick:
> 
> The problem is not dynamic IP addresses changing. That’s easy to fix. It’s
> CG-NAT (Carrier Grade Network Address Translation), which doesn’t give you
> an external world addressable IP address. You can’t assign a DDNS name
> because you don’t HAVE an IP address to map to. Many carriers (T-Mobile is
> a perfect example) are now using this approach, which blocks customers from
> getting to their devices/services from outside their home networks.
> 
> The only solution is to use a commercial tunneling VPN or a free service
> like ngrok, which creates a permanent tunnel to external servers which DO
> have addressable IP addresses.
> 
> 73, Adrian
> 
> 
>> On Dec 15, 2023, at 9:20 AM, Rick Tavan  wrote:
>> 
>> Hi, Dave. I don't think it will be much of an issue. With many ISPs,
>> external IP addresses change rarely. If your ISP is changing addresses
>> frequently, consider using a DDNS server like no-ip.com. I have tested
> K4
>> Remote using a DDNS string in lieu of a hard-coded WAN address and it
> works
>> fine.
>> 
>> /Rick N6XI
>> 
>>> On Fri, Dec 15, 2023 at 1:44 AM Dave  wrote:
>>> 
>>> Very interesting Rick, thanks for sharing the info.
>>> 
>>> One issue that seems to be increasingly common is that some (many?)
> ISPs no
>>> longer offer a fixed IP address, which K4 Remote currently needs. The
>>> system many ISPs are changing to is carrier grade network address
>>> translation, it first surfaced in mobile networks, but is spreading to
> home
>>> broadband too as ISPs run out of IPv4 addresses, see:
>>> https://en.wikipedia.org/wiki/Carrier-grade_NAT
>>> 
>>> A way around this is with the use of a central server, which isn't
> usually
>>> free. Remote TX works in this way but uses a Raspberry Pi. I note they
>>> support the K3. https://www.remotetx.net/
>>> 
>>> 73 Dave G4AON
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to rta...@gmail.com
>>> 
>> 
>> 
>> --
>> --
>> 
>> Rick Tavan
>> Truckee and Saratoga, CA
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kj7...@gmail.com
> 


--
--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to llader...@icloud.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Nate Bargmann]

* On 2023 15 Dec 11:47 -0600, KJ7SOY wrote:
> Rick:
> 
> The problem is not dynamic IP addresses changing. That’s easy to fix.
> It’s CG-NAT (Carrier Grade Network Address Translation), which doesn’t
> give you an external world addressable IP address. You can’t assign a
> DDNS name because you don’t HAVE an IP address to map to. Many
> carriers (T-Mobile is a perfect example) are now using this approach,
> which blocks customers from getting to their devices/services from
> outside their home networks. 
> 
> The only solution is to use a commercial tunneling VPN or a free
> service like ngrok, which creates a permanent tunnel to external
> servers which DO have addressable IP addresses. 

I faced such a dilemma some years back when it looked as though we would
need to rely on a cellular router for an ISP.  Fortunately, that didn't
become a permanent solution.

My solution was setting up an AWS instance to which I set up a reverse
SSH tunnel from home and then I could SSH to it from elsewhere and
connect to the reverse tunnel.  Conceptually it's somewhat like a VPN
only it had some manual steps in place.  I now have a similar setup from
a Raspberry Pi running AllStar at a repeater site that connects to a
local system and sets up an SSH reverse tunnel end point.  I did try to
set up a Wire Guard VPN a few years back but had no luck  Perhaps I need
to revisit that idea since things have had a few years to mature,
including me!

73, Nate, N0NB

-- 
"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."
Web: https://www.n0nb.us
Projects: https://github.com/N0NB
GPG fingerprint: 82D6 4F6B 0E67 CD41 F689 BBA6 FB2C 5130 D55A 8819

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Rick Tavan]

Thanks, Adrian. I didn't realize how ubiquitous that technique is becoming.
I guess I live a sheltered life here in the mountains and, of course, in
Silicon Valley. I hope your solutions don't add unacceptable latency.

/Rick N6XI

On Fri, Dec 15, 2023 at 9:46 AM KJ7SOY  wrote:

> Rick:
>
> The problem is not dynamic IP addresses changing. That’s easy to fix. It’s
> CG-NAT (Carrier Grade Network Address Translation), which doesn’t give you
> an external world addressable IP address. You can’t assign a DDNS name
> because you don’t HAVE an IP address to map to. Many carriers (T-Mobile is
> a perfect example) are now using this approach, which blocks customers from
> getting to their devices/services from outside their home networks.
>
> The only solution is to use a commercial tunneling VPN or a free service
> like ngrok, which creates a permanent tunnel to external servers which DO
> have addressable IP addresses.
>
> 73, Adrian
>
>
> > On Dec 15, 2023, at 9:20 AM, Rick Tavan  wrote:
> >
> > Hi, Dave. I don't think it will be much of an issue. With many ISPs,
> > external IP addresses change rarely. If your ISP is changing addresses
> > frequently, consider using a DDNS server like no-ip.com. I have tested
> K4
> > Remote using a DDNS string in lieu of a hard-coded WAN address and it
> works
> > fine.
> >
> > /Rick N6XI
> >
> >> On Fri, Dec 15, 2023 at 1:44 AM Dave  wrote:
> >>
> >> Very interesting Rick, thanks for sharing the info.
> >>
> >> One issue that seems to be increasingly common is that some (many?)
> ISPs no
> >> longer offer a fixed IP address, which K4 Remote currently needs. The
> >> system many ISPs are changing to is carrier grade network address
> >> translation, it first surfaced in mobile networks, but is spreading to
> home
> >> broadband too as ISPs run out of IPv4 addresses, see:
> >> https://en.wikipedia.org/wiki/Carrier-grade_NAT
> >>
> >> A way around this is with the use of a central server, which isn't
> usually
> >> free. Remote TX works in this way but uses a Raspberry Pi. I note they
> >> support the K3. https://www.remotetx.net/
> >>
> >> 73 Dave G4AON
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to rta...@gmail.com
> >>
> >
> >
> > --
> > --
> >
> > Rick Tavan
> > Truckee and Saratoga, CA
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to kj7...@gmail.com
>


-- 
--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[KJ7SOY]

Rick:

The problem is not dynamic IP addresses changing. That’s easy to fix. It’s 
CG-NAT (Carrier Grade Network Address Translation), which doesn’t give you an 
external world addressable IP address. You can’t assign a DDNS name because you 
don’t HAVE an IP address to map to. Many carriers (T-Mobile is a perfect 
example) are now using this approach, which blocks customers from getting to 
their devices/services from outside their home networks. 

The only solution is to use a commercial tunneling VPN or a free service like 
ngrok, which creates a permanent tunnel to external servers which DO have 
addressable IP addresses. 

73, Adrian


> On Dec 15, 2023, at 9:20 AM, Rick Tavan  wrote:
> 
> Hi, Dave. I don't think it will be much of an issue. With many ISPs,
> external IP addresses change rarely. If your ISP is changing addresses
> frequently, consider using a DDNS server like no-ip.com. I have tested K4
> Remote using a DDNS string in lieu of a hard-coded WAN address and it works
> fine.
> 
> /Rick N6XI
> 
>> On Fri, Dec 15, 2023 at 1:44 AM Dave  wrote:
>> 
>> Very interesting Rick, thanks for sharing the info.
>> 
>> One issue that seems to be increasingly common is that some (many?) ISPs no
>> longer offer a fixed IP address, which K4 Remote currently needs. The
>> system many ISPs are changing to is carrier grade network address
>> translation, it first surfaced in mobile networks, but is spreading to home
>> broadband too as ISPs run out of IPv4 addresses, see:
>> https://en.wikipedia.org/wiki/Carrier-grade_NAT
>> 
>> A way around this is with the use of a central server, which isn't usually
>> free. Remote TX works in this way but uses a Raspberry Pi. I note they
>> support the K3. https://www.remotetx.net/
>> 
>> 73 Dave G4AON
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rta...@gmail.com
>> 
> 
> 
> -- 
> --
> 
> Rick Tavan
> Truckee and Saratoga, CA
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kj7...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Rick Tavan]

Hi, Dave. I don't think it will be much of an issue. With many ISPs,
external IP addresses change rarely. If your ISP is changing addresses
frequently, consider using a DDNS server like no-ip.com. I have tested K4
Remote using a DDNS string in lieu of a hard-coded WAN address and it works
fine.

/Rick N6XI

On Fri, Dec 15, 2023 at 1:44 AM Dave  wrote:

> Very interesting Rick, thanks for sharing the info.
>
> One issue that seems to be increasingly common is that some (many?) ISPs no
> longer offer a fixed IP address, which K4 Remote currently needs. The
> system many ISPs are changing to is carrier grade network address
> translation, it first surfaced in mobile networks, but is spreading to home
> broadband too as ISPs run out of IPv4 addresses, see:
> https://en.wikipedia.org/wiki/Carrier-grade_NAT
>
> A way around this is with the use of a central server, which isn't usually
> free. Remote TX works in this way but uses a Raspberry Pi. I note they
> support the K3. https://www.remotetx.net/
>
> 73 Dave G4AON
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>


-- 
--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Magnus Danielson via Elecraft]

This issue is real. A problem is also there is quite many port forward 
configurations to setup as one setup a station.


There is methods to punch through NATs, and I hope one have chosen to 
use an approach that does this. One is to operate over a VPN that have 
these abilities. Another is to use a standard tunnel usinging say TLS 
that also include the punch-through capabilities.


Also, IPv6 is starting to replace the IPv4 NAT/CG-NAT hell. It's been a 
long coming for sure, but there is plenty of signs it is happening. 
While initial release may be IPv4 limited, IPv6 should be high up on the 
list of thigns to fix if it is not already handled. This should not be 
relevant only for the K4, but any device.


When wearing another set of hats, I work on these issues.

73 Magnus SA0MAD

On 2023-12-15 10:42, Dave wrote:

Very interesting Rick, thanks for sharing the info.

One issue that seems to be increasingly common is that some (many?) ISPs no
longer offer a fixed IP address, which K4 Remote currently needs. The
system many ISPs are changing to is carrier grade network address
translation, it first surfaced in mobile networks, but is spreading to home
broadband too as ISPs run out of IPv4 addresses, see:
https://en.wikipedia.org/wiki/Carrier-grade_NAT

A way around this is with the use of a central server, which isn't usually
free. Remote TX works in this way but uses a Raspberry Pi. I note they
support the K3. https://www.remotetx.net/

73 Dave G4AON
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mag...@rubidium.se

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Dave]

Very interesting Rick, thanks for sharing the info.

One issue that seems to be increasingly common is that some (many?) ISPs no
longer offer a fixed IP address, which K4 Remote currently needs. The
system many ISPs are changing to is carrier grade network address
translation, it first surfaced in mobile networks, but is spreading to home
broadband too as ISPs run out of IPv4 addresses, see:
https://en.wikipedia.org/wiki/Carrier-grade_NAT

A way around this is with the use of a central server, which isn't usually
free. Remote TX works in this way but uses a Raspberry Pi. I note they
support the K3. https://www.remotetx.net/

73 Dave G4AON
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[David Gilbert]

That makes sense.

Dave   AB7E



On 12/14/2023 11:23 AM, Mark Musick wrote:

Dave,
That is not what that configuration is about.
What this is for is for those remote stations that have a K4 and have many 
remote operators.
We have a local remote station here in Indy that has a K4 and several of the 
Remote operators have K4s. Now they can operate remotely from home as if they 
were at the remote site.

73,
Mark, WB9CIF

-Original Message-
From:elecraft-boun...@mailman.qth.netOn 
Behalf Of David Gilbert
Sent: Thursday, December 14, 2023 17:44
To:elecraft@mailman.qth.net
Subject: Re: [Elecraft] K4 Remote Lives and Breathes!



I thought that what people really wanted was the promised app that would let 
users remotely control the K4 from their desktop or other device.

Buying two K4s seems like a very financially inefficient way to go. 
Bidirectionality doesn't sound like a practical plus.

Dave   AB7E


On 12/14/2023 9:19 AM, Rick Tavan wrote:

Many ops have been anxiously awaiting the arrival of K4 Remote.
Although it's not yet available for general release, several field
testers have been exercising it. (K4-to-K4, not K4/0 or PC-based VK4
although those are in progress inside Elecraft.) I've made over a
thousand remote contacts with it, mainly CW contesting but also DXing,
ragchews, SSB and FT8, and can say
this:

*THE HARD STUFF IS DONE!*


I have K4 radios at a mountain QTH and a valley QTH and either one can
connect to and use the other. It feels almost like local, better than
K3 Remote with microBit RRCs. Some features and "corner cases" remain
and Elecraft programmers are hard at work on them.

Some highlights:

 - Cabling changes required: *ZERO* - leave both stations in their local
 configuration. You do need a way to turn on a remote K4. I'm using N6TV
 "K-ON" dongles and remote power switches. I think you can also do it from a
 connected KPA1500 and KPA1500 Remote. No need to leave anything powered on
 when not in use.
 - It's *dead simple* to connect - just specify an IP address on the
 client (control) K4 and set up one port forward on the LAN router at the
 server (remote radio) site. Passwords will prevent unwanted intrusion.
 (Compare to over 100 parameters that have to be set up between pairs of
 RRCs - and they only work one-way!)
 - Connection takes about a second.
 - It's bi-directional - any K4 anywhere can control any other K4
 anywhere. No hardware asymmetry.
 - CW sidetone and Voice monitor are local, so unaffected by latency.
 - Use the keyer inside the client K4 or an external keyer.
 - Plays nicely with loggers like N1MM. They see the local K4 and don't
 realize it's controlling a remote radio.
 - You can update the firmware in both radios from the K4 at either site.
 - ... and more

I've been an avid remote op for a decade now and this is better than I
expected, like K4 itself well worth the wait. Hang in there, folks,
it's really coming. Really.

73,

/Rick N6XI

--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home:http://m/
ailman.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C02%7C%7C6568d
b7dfa6f400d624708dbfccc8209%7C84df9e7fe9f640afb435%7C1%7C0
%7C638381727519770354%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQ
IjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=zcqh%
2FHbdtuXzWqIjXgHrw5JosaG0L%2FoABp30Zd7VtGw%3D=0
Help:http://m/
ailman.qth.net%2Fmmfaq.htm=05%7C02%7C%7C6568db7dfa6f400d624708dbf
ccc8209%7C84df9e7fe9f640afb435%7C1%7C0%7C63838172751992657
6%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6
Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=mb3yoMCfCfMlXbpPX14UCIAtv
utcrz7UZh3Yv%2BRADOU%3D=0
Post:mailto:Elecraft@mailman.qth.net

This list hosted
by:http://www/
.qsl.net%2F=05%7C02%7C%7C6568db7dfa6f400d624708dbfccc8209%7C84df9
e7fe9f640afb435%7C1%7C0%7C638381727519926576%7CUnknown%7CT
WFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI
6Mn0%3D%7C3000%7C%7C%7C=SVHoy2LmDqEOokCFN2We%2BgjQIoS%2BQ35yeEvR
qcK0QGA%3D=0 Please help support this email
list:http://w/
ww.qsl.net%2Fdonate.html=05%7C02%7C%7C6568db7dfa6f400d624708dbfcc
c8209%7C84df9e7fe9f640afb435%7C1%7C0%7C638381727519926576%
7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik
1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=DTGvxCPM%2FJhwwShc46ID364B4
L8XWp45w0ZRz83BVSQ%3D=0 Message deliveredtoab7e...@gmail.com

__
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:Elecraft@mailman.qth.net

This list hosted by:http://www.qsl.net/
Please help support this email list:http://www.qsl.net/donate.html
Message delivered tomarkmus...@outlook.com

__
E

Re: [Elecraft] K4 Remote Lives and Breathes!

[Mark Musick]

Dave,
That is not what that configuration is about.
What this is for is for those remote stations that have a K4 and have many 
remote operators.
We have a local remote station here in Indy that has a K4 and several of the 
Remote operators have K4s. Now they can operate remotely from home as if they 
were at the remote site.

73,
Mark, WB9CIF

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of David Gilbert
Sent: Thursday, December 14, 2023 17:44
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K4 Remote Lives and Breathes!



I thought that what people really wanted was the promised app that would let 
users remotely control the K4 from their desktop or other device.

Buying two K4s seems like a very financially inefficient way to go. 
Bidirectionality doesn't sound like a practical plus.

Dave   AB7E


On 12/14/2023 9:19 AM, Rick Tavan wrote:
> Many ops have been anxiously awaiting the arrival of K4 Remote.
> Although it's not yet available for general release, several field
> testers have been exercising it. (K4-to-K4, not K4/0 or PC-based VK4
> although those are in progress inside Elecraft.) I've made over a
> thousand remote contacts with it, mainly CW contesting but also DXing,
> ragchews, SSB and FT8, and can say
> this:
>
> *THE HARD STUFF IS DONE!*
>
>
> I have K4 radios at a mountain QTH and a valley QTH and either one can
> connect to and use the other. It feels almost like local, better than
> K3 Remote with microBit RRCs. Some features and "corner cases" remain
> and Elecraft programmers are hard at work on them.
>
> Some highlights:
>
> - Cabling changes required: *ZERO* - leave both stations in their local
> configuration. You do need a way to turn on a remote K4. I'm using N6TV
> "K-ON" dongles and remote power switches. I think you can also do it from 
> a
> connected KPA1500 and KPA1500 Remote. No need to leave anything powered on
> when not in use.
> - It's *dead simple* to connect - just specify an IP address on the
> client (control) K4 and set up one port forward on the LAN router at the
> server (remote radio) site. Passwords will prevent unwanted intrusion.
> (Compare to over 100 parameters that have to be set up between pairs of
> RRCs - and they only work one-way!)
> - Connection takes about a second.
> - It's bi-directional - any K4 anywhere can control any other K4
> anywhere. No hardware asymmetry.
> - CW sidetone and Voice monitor are local, so unaffected by latency.
> - Use the keyer inside the client K4 or an external keyer.
> - Plays nicely with loggers like N1MM. They see the local K4 and don't
> realize it's controlling a remote radio.
> - You can update the firmware in both radios from the K4 at either site.
> - ... and more
>
> I've been an avid remote op for a decade now and this is better than I
> expected, like K4 itself well worth the wait. Hang in there, folks,
> it's really coming. Really.
>
> 73,
>
> /Rick N6XI
>
> --
>
> Rick Tavan
> Truckee and Saratoga, CA
> __
> Elecraft mailing list
> Home:http://m/
> ailman.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C02%7C%7C6568d
> b7dfa6f400d624708dbfccc8209%7C84df9e7fe9f640afb435%7C1%7C0
> %7C638381727519770354%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQ
> IjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=zcqh%
> 2FHbdtuXzWqIjXgHrw5JosaG0L%2FoABp30Zd7VtGw%3D=0
> Help:http://m/
> ailman.qth.net%2Fmmfaq.htm=05%7C02%7C%7C6568db7dfa6f400d624708dbf
> ccc8209%7C84df9e7fe9f640afb435%7C1%7C0%7C63838172751992657
> 6%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6
> Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=mb3yoMCfCfMlXbpPX14UCIAtv
> utcrz7UZh3Yv%2BRADOU%3D=0
> Post:mailto:Elecraft@mailman.qth.net
>
> This list hosted
> by:http://www/
> .qsl.net%2F=05%7C02%7C%7C6568db7dfa6f400d624708dbfccc8209%7C84df9
> e7fe9f640afb435%7C1%7C0%7C638381727519926576%7CUnknown%7CT
> WFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI
> 6Mn0%3D%7C3000%7C%7C%7C=SVHoy2LmDqEOokCFN2We%2BgjQIoS%2BQ35yeEvR
> qcK0QGA%3D=0 Please help support this email
> list:http://w/
> ww.qsl.net%2Fdonate.html=05%7C02%7C%7C6568db7dfa6f400d624708dbfcc
> c8209%7C84df9e7fe9f640afb435%7C1%7C0%7C638381727519926576%
> 7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik
> 1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=DTGvxCPM%2FJhwwShc46ID364B4
> L8XWp45w0ZRz83BVSQ%3D=0 Message delivered toab7e...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.

Re: [Elecraft] K4 Remote Lives and Breathes!

[David Gilbert]

I thought that what people really wanted was the promised app that would 
let users remotely control the K4 from their desktop or other device.


Buying two K4s seems like a very financially inefficient way to go.  
Bidirectionality doesn't sound like a practical plus.


Dave   AB7E


On 12/14/2023 9:19 AM, Rick Tavan wrote:

Many ops have been anxiously awaiting the arrival of K4 Remote. Although
it's not yet available for general release, several field testers have been
exercising it. (K4-to-K4, not K4/0 or PC-based VK4 although those are in
progress inside Elecraft.) I've made over a thousand remote contacts with
it, mainly CW contesting but also DXing, ragchews, SSB and FT8, and can say
this:

*THE HARD STUFF IS DONE!*


I have K4 radios at a mountain QTH and a valley QTH and either one can
connect to and use the other. It feels almost like local, better than K3
Remote with microBit RRCs. Some features and "corner cases" remain and
Elecraft programmers are hard at work on them.

Some highlights:

- Cabling changes required: *ZERO* - leave both stations in their local
configuration. You do need a way to turn on a remote K4. I'm using N6TV
"K-ON" dongles and remote power switches. I think you can also do it from a
connected KPA1500 and KPA1500 Remote. No need to leave anything powered on
when not in use.
- It's *dead simple* to connect - just specify an IP address on the
client (control) K4 and set up one port forward on the LAN router at the
server (remote radio) site. Passwords will prevent unwanted intrusion.
(Compare to over 100 parameters that have to be set up between pairs of
RRCs - and they only work one-way!)
- Connection takes about a second.
- It's bi-directional - any K4 anywhere can control any other K4
anywhere. No hardware asymmetry.
- CW sidetone and Voice monitor are local, so unaffected by latency.
- Use the keyer inside the client K4 or an external keyer.
- Plays nicely with loggers like N1MM. They see the local K4 and don't
realize it's controlling a remote radio.
- You can update the firmware in both radios from the K4 at either site.
- ... and more

I've been an avid remote op for a decade now and this is better than I
expected, like K4 itself well worth the wait. Hang in there, folks, it's
really coming. Really.

73,

/Rick N6XI

--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:Elecraft@mailman.qth.net

This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered toab7e...@gmail.com  

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Remote Lives and Breathes!

[Bayard Coolidge, N1HO via Elecraft]

 As a retired software QC engineer (UNIX OS and layered products), I'm 
curiousas to what kind of testing would be needed at a mountain QTH versus a 
valley QTH. :-)
In all seriousness, congratulations - I can easily imagine that it's been a LOT 
of work,and I'm sure all of us are sincerely grateful: THANK YOU !!
Very 73 for a healthy and happy holiday season,
Brandy, N1HO (EL96xh, 1800 feet inland from the Atlantic...)

On Thursday, December 14, 2023 at 11:22:36 AM EST, Rick Tavan 
 wrote:  

*THE HARD STUFF IS DONE!*


I have K4 radios at a mountain QTH and a valley QTH and either one can
connect to and use the other. 
  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 Remote Lives and Breathes!

[Rick Tavan]

Many ops have been anxiously awaiting the arrival of K4 Remote. Although
it's not yet available for general release, several field testers have been
exercising it. (K4-to-K4, not K4/0 or PC-based VK4 although those are in
progress inside Elecraft.) I've made over a thousand remote contacts with
it, mainly CW contesting but also DXing, ragchews, SSB and FT8, and can say
this:

*THE HARD STUFF IS DONE!*


I have K4 radios at a mountain QTH and a valley QTH and either one can
connect to and use the other. It feels almost like local, better than K3
Remote with microBit RRCs. Some features and "corner cases" remain and
Elecraft programmers are hard at work on them.

Some highlights:

   - Cabling changes required: *ZERO* - leave both stations in their local
   configuration. You do need a way to turn on a remote K4. I'm using N6TV
   "K-ON" dongles and remote power switches. I think you can also do it from a
   connected KPA1500 and KPA1500 Remote. No need to leave anything powered on
   when not in use.
   - It's *dead simple* to connect - just specify an IP address on the
   client (control) K4 and set up one port forward on the LAN router at the
   server (remote radio) site. Passwords will prevent unwanted intrusion.
   (Compare to over 100 parameters that have to be set up between pairs of
   RRCs - and they only work one-way!)
   - Connection takes about a second.
   - It's bi-directional - any K4 anywhere can control any other K4
   anywhere. No hardware asymmetry.
   - CW sidetone and Voice monitor are local, so unaffected by latency.
   - Use the keyer inside the client K4 or an external keyer.
   - Plays nicely with loggers like N1MM. They see the local K4 and don't
   realize it's controlling a remote radio.
   - You can update the firmware in both radios from the K4 at either site.
   - ... and more

I've been an avid remote op for a decade now and this is better than I
expected, like K4 itself well worth the wait. Hang in there, folks, it's
really coming. Really.

73,

/Rick N6XI

--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 missing features

[G4GNX]

Maybe it depends on the individual setup.

Despite using a steerable double mag-loop for RX, the urban noise is 
horrendous. I don’t find the K3S NR to be particularly good and I’ve placed a 
BHI Parametric Equaliser NR box in line. For me, it doesn’t do a great deal - 
except for one day last week, where the signal I wanted was strong (S9) and 
about equal to the ambient noise. I then found that I could null out the noise 
entirely with the BHI unit, giving me near armchair copy. When the wanted 
signal is below S9, noise reduction results in degradation of the wanted audio 
to a point where the NR is non-effective.

Currently, I find the K4D noise reduction works quite well, albeit using a 
different RX antenna.

As Wayne has already stated Q1 2024 and we’re not there yet, why would you 
expect a different answer at this point?

73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700


> 
> 
> On 11/12/2023 3:45, Tim Tucker wrote:
>> I got tired of waiting for special subtraction NR and decided to do
>> something about the lousy K4 NR on SSB. I bought the BHI Dual Inline NR
>> module and the results are impressive. I will publish a video soon. Anyone
>> who says that better NR won't help you make more weak signal contacts,
>> especially if you're in the big city, doesn't know what they are talking
>> about on this subject. That plus the decreased fatigue factor...
>> The last thing we heard from Wayne about missing features was that the
>> Remote Software would be released as Beta in Q1 2024. Every other ask about
>> other features has been met with radio silence for months. Expect more of
>> the same at this point.
>> Tim

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 missing features, was OT: The 4-track mind

[Victor Rosenthal 4X6GP]

Can anyone comment on whether this is also useful on CW? In particular, 
as compared to the K3 NR.


73, Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/

On 11/12/2023 3:45, Tim Tucker wrote:

I got tired of waiting for special subtraction NR and decided to do
something about the lousy K4 NR on SSB. I bought the BHI Dual Inline NR
module and the results are impressive. I will publish a video soon. Anyone
who says that better NR won't help you make more weak signal contacts,
especially if you're in the big city, doesn't know what they are talking
about on this subject. That plus the decreased fatigue factor...

The last thing we heard from Wayne about missing features was that the
Remote Software would be released as Beta in Q1 2024. Every other ask about
other features has been met with radio silence for months. Expect more of
the same at this point.

Tim

On Sun, Dec 10, 2023, 11:34 AM George Danner  wrote:


4. Transmit Monitor

73 George AI4VZ

On Sun, Dec 10, 2023 at 11:29 AM Dave  wrote:


Wayne, if you can return to a single track mind for a moment, any update

on

when the K4 missing features will be finished?

In no particular order:
1. General coverage, the button still does nothing.
2. Pre-distortion
3. Remote operation via Ethernet

In addition, with the K3 there was an update to the firmware which

allowed

VOX to be turned off when the radio was turned off/on. I keep forgetting
and accidentally catching my paddles on my K4...

Now that higher data rates have been approved for the USA, any chance of
fixing the issue where the K4 struggles with Pactor (dropping PTT results
in truncated data transmissions due to TX to RX timing issue), The fix is
to add a 20 mS PTT hold on delay and consider speeding up the throughput

to

reduce latency too. The same issue with the K3 was fixed in a week of

being

reported.

73 Dave
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to gdanne...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ae...@worldwidedx.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k2vco@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K4] Elecraft 80M SSB Net Announcement

[Dave New, N8SBE]

I've had to move up to 3.828 MHz, which is the first open frequency I've 
been able to find tonight.  The Netlogger entry has been updated.


73,
-- Dave, N8SBE

On 2023-12-10 20:28, Dave New - N8SBE wrote:
I forgot to mention that I'm using Netlogger, so if you are a Netlogger 
user, you can find the net under "80M Elecraft SSB Net" when I create 
the net starting usually 15 minutes before net time, looking for early 
check ins.


For more information on Netlogger, visit https://netlogger.org/

73,
-- Dave, N8SBE

On 2023-12-10 17:18, Dave New, N8SBE wrote:
Please join us on 3806kHz (NOTE THE NEW FREQUENCY WHICH MOVES US INTO 
THE GENERAL CLASS BAND), 9PM ET Sunday (0200Z Monday). Note that the 
net stays on the same local time, when we switch back and forth 
to/from Daylight time, so the UTC time changes, but not the local 
time.


Now that we have moved into Standard time and have shorter daylight 
hours, 80M should be stronger now during the winter.


Your net control this week will be Dave, N8SBE.

Hope to see you this evening on the net.

73,

-- Dave, N8SBE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n8...@densbe.com



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#28401): 
https://groups.io/g/Elecraft-K4/message/28401

Mute This Topic: https://groups.io/mt/103101044/439435
Group Owner: elecraft-k4+ow...@groups.io
Unsubscribe: 
https://groups.io/g/Elecraft-K4/leave/12322551/439435/1385384913/xyzzy 
[n8...@densbe.com]

-=-=-=-=-=-=-=-=-=-=-=-

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 missing features, was OT: The 4-track mind

[Tim Tucker]

I got tired of waiting for special subtraction NR and decided to do
something about the lousy K4 NR on SSB. I bought the BHI Dual Inline NR
module and the results are impressive. I will publish a video soon. Anyone
who says that better NR won't help you make more weak signal contacts,
especially if you're in the big city, doesn't know what they are talking
about on this subject. That plus the decreased fatigue factor...

The last thing we heard from Wayne about missing features was that the
Remote Software would be released as Beta in Q1 2024. Every other ask about
other features has been met with radio silence for months. Expect more of
the same at this point.

Tim

On Sun, Dec 10, 2023, 11:34 AM George Danner  wrote:

> 4. Transmit Monitor
>
> 73 George AI4VZ
>
> On Sun, Dec 10, 2023 at 11:29 AM Dave  wrote:
>
> > Wayne, if you can return to a single track mind for a moment, any update
> on
> > when the K4 missing features will be finished?
> >
> > In no particular order:
> > 1. General coverage, the button still does nothing.
> > 2. Pre-distortion
> > 3. Remote operation via Ethernet
> >
> > In addition, with the K3 there was an update to the firmware which
> allowed
> > VOX to be turned off when the radio was turned off/on. I keep forgetting
> > and accidentally catching my paddles on my K4...
> >
> > Now that higher data rates have been approved for the USA, any chance of
> > fixing the issue where the K4 struggles with Pactor (dropping PTT results
> > in truncated data transmissions due to TX to RX timing issue), The fix is
> > to add a 20 mS PTT hold on delay and consider speeding up the throughput
> to
> > reduce latency too. The same issue with the K3 was fixed in a week of
> being
> > reported.
> >
> > 73 Dave
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to gdanne...@gmail.com
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ae...@worldwidedx.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 missing features, was OT: The 4-track mind

[George Danner]

4. Transmit Monitor

73 George AI4VZ

On Sun, Dec 10, 2023 at 11:29 AM Dave  wrote:

> Wayne, if you can return to a single track mind for a moment, any update on
> when the K4 missing features will be finished?
>
> In no particular order:
> 1. General coverage, the button still does nothing.
> 2. Pre-distortion
> 3. Remote operation via Ethernet
>
> In addition, with the K3 there was an update to the firmware which allowed
> VOX to be turned off when the radio was turned off/on. I keep forgetting
> and accidentally catching my paddles on my K4...
>
> Now that higher data rates have been approved for the USA, any chance of
> fixing the issue where the K4 struggles with Pactor (dropping PTT results
> in truncated data transmissions due to TX to RX timing issue), The fix is
> to add a 20 mS PTT hold on delay and consider speeding up the throughput to
> reduce latency too. The same issue with the K3 was fixed in a week of being
> reported.
>
> 73 Dave
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gdanne...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 missing features, was OT: The 4-track mind

[Dave]

Wayne, if you can return to a single track mind for a moment, any update on
when the K4 missing features will be finished?

In no particular order:
1. General coverage, the button still does nothing.
2. Pre-distortion
3. Remote operation via Ethernet

In addition, with the K3 there was an update to the firmware which allowed
VOX to be turned off when the radio was turned off/on. I keep forgetting
and accidentally catching my paddles on my K4...

Now that higher data rates have been approved for the USA, any chance of
fixing the issue where the K4 struggles with Pactor (dropping PTT results
in truncated data transmissions due to TX to RX timing issue), The fix is
to add a 20 mS PTT hold on delay and consider speeding up the throughput to
reduce latency too. The same issue with the K3 was fixed in a week of being
reported.

73 Dave
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 discussion on groups.io

[Mark Musick]

Hi Dave,
I can think of three reasons why in-depth discussion of the K4 is not taking 
place here on this reflector.
The biggest reason is this reflector does not support HTML or attachments. With 
the K4 being able to attach screenshots of the K4 display is very important in 
trouble shooting and answering questions about settings.
The second reason is the file support on the K4 reflector. Where files can be 
deposited for subscribers to access at will. This reflector does not support 
that kind of depository. This reflector does have an archive like the K4 
reflector, but in my opinion the search capability on the K4 reflector is 
superior.
The third reason is , while this reflector has served us well when Elecraft had 
only a few products, now it has become a real navigation issue with so many 
products. Yes, you can set rules to get only those K4, K3, etc. to go to a 
certain folder, but that requires the sender to put the appropriate subject 
line in. This doesn't always happen. The K4 reflector example is people will 
change the discussion of a thread and not update the subject line. On the K4 
reflector or the KX reflector you know the discussion is only about the K4 or 
KX radios.
Fourth on the group.io reflectors there is a dedicated administrator. Back in 
the day it was easy for Wayne and Eric to administer this reflector now with so 
much activity it is hard for them to do that. They have now passed that on to 
Keith. Keith's job is to fix K3s and K4s. I would prefer as a customer that he 
continue doing that and not worry about administering this reflector.
As to being a nonmember of groups.io, it is a simple task to join groups.io and 
subscribe to any groups/reflectors you wish. I belong to eight groups, all 
related to amateur radio.
Also, I have mentioned before you don't have to own or even aspire to own a K4 
to join the K4 reflector. There are subscribers there that their main interest 
is SDRs in general etc.
And one more reason. There are subscribers on the K4 reflector that only own a 
K4 and no other Elecraft equipment and they don't want to filter through all 
the other discussions about Elecraft equipment they don't own or care about. 
They are not going to subscribe to this reflector.
I hope that explains things for you Dave. Sign up on the K4 reflector and learn 
more about it. You are more than welcome there.

73,
Mark, WB9CIF

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Dave
Sent: Thursday, October 26, 2023 08:34
To: Elecraft Discussion List 
Subject: [Elecraft] K4 discussion on groups.io

While separate groups for K1, K2, K3, K4, KX2, etc are up to whoever sets them 
up, lets not forget the main product for Elecraft at the moment is the K4, so 
why not discuss it on this open group that is run by Elecraft?

The K4 groups.io archive is closed to non members, which isn't helpful to 
anyone who doesn't wish to join but merely wants more information on a product.

73 Dave G4AON
K1, K2, KX3, K4D (#286), KPA500
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to markmus...@outlook.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 discussion on groups.io

[Mike Dodd]

On 10/26/2023 10:08 AM, Mike Dodd wrote:
Next to each group name is a link 
to open a page where you can set your email preferences; see the 
attached screen shot.


I guess this group doesn't allow attachments, so the screen shot didn't 
come through. Just go to your group list, and the link will be obvious.


--- mike N4CF


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 discussion on groups.io

[Mike Dodd]

On 10/26/2023 9:52 AM, Mark Musick wrote:

Hi Magnus,
I take it you are not familiar with groups.io so first groups.io is a web-based 
collective of lots of different reflectors. Someone else can probably give a 
better description.


I think your description is great! It covers the information thoroughly 
and provides all the info needed to subscribe to a group.


One thing I would add is, once you're subscribed to one or more groups, 
those appear on the Your Groups list. Next to each group name is a link 
to open a page where you can set your email preferences; see the 
attached screen shot. You can choose to receive individual emails, 
summaries, or no emails at all (you'd read messages online at groups.i0).


73, Mike N4CF

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 discussion on groups.io

[Mark Musick]

Hi Magnus,
I take it you are not familiar with groups.io so first groups.io is a web-based 
collective of lots of different reflectors. Someone else can probably give a 
better description.
Open your browser and type in groups.io and it will take you to their sign in 
page. Once you are a member of groups.io you can subscribe to any of the 
reflectors using groups.io.
I'm currently subscribed to eight different reflectors that use groups.io.
One of those eight is the Elecraft-K4 reflector.
Once you're on groups.io you can browse the list of reflectors. Type in 
Elecraft-K4 and it will ask for information for you to subscribe. Then Alan, 
G4GNX. the reflector administrator will review your information and then you're 
in.
Then you will receive any emails that are posted to the reflector. You will 
also have access to the files section where you can download files that have 
been deposited there containing information on macros, answers to many 
questions about the K4 etc.
If you are interested in the Elecraft KX line, there is a groups.io reflector 
for the KX line. The KX3, KX2 and now it also includes the KH1.
If you have more questions, fire away. You can email Alan, G4GNX with any 
specific questions about the K4 Reflector.

73,
Mark, WB9CIF

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Magnus Danielson via Elecraft
Sent: Thursday, October 26, 2023 13:33
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K4 discussion on groups.io

How does one even get into them, I have not heard of these and if there is K4 
knowledge there I would enjoy seeing that as a K4 owner. I had expected to find 
that here, but it's hard to find the little there is with all the other posts.

Cheers,
Magnus

On 2023-10-26 10:34, Dave wrote:
> While separate groups for K1, K2, K3, K4, KX2, etc are up to whoever
> sets them up, lets not forget the main product for Elecraft at the
> moment is the K4, so why not discuss it on this open group that is run by 
> Elecraft?
>
> The K4 groups.io archive is closed to non members, which isn't helpful
> to anyone who doesn't wish to join but merely wants more information
> on a product.
>
> 73 Dave G4AON
> K1, K2, KX3, K4D (#286), KPA500
> __
> Elecraft mailing list
> Home:
> http://mailma/
> n.qth.net%2Fmailman%2Flistinfo%2Felecraft=05%7C01%7C%7C69e7a6fce5
> 714a08d0bd08dbd6283cbe%7C84df9e7fe9f640afb435%7C1%7C0%7C63
> 8339240530852276%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV
> 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=jBTp3vVHAj
> xiza5qALg3rLPWMDByRjb6HzQSbx6EK8o%3D=0
> Help:
> http://mailma/
> n.qth.net%2Fmmfaq.htm=05%7C01%7C%7C69e7a6fce5714a08d0bd08dbd6283c
> be%7C84df9e7fe9f640afb435%7C1%7C0%7C638339240530852276%7CU
> nknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1ha
> WwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=yVVZU4WH0Nys55JHFxendcpDElJx%2
> FHYy1VA2eDGEXKQ%3D=0
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by:
> http://www.qs/
> l.net%2F=05%7C01%7C%7C69e7a6fce5714a08d0bd08dbd6283cbe%7C84df9e7f
> e9f640afb435%7C1%7C0%7C638339240530852276%7CUnknown%7CTWFp
> bGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn
> 0%3D%7C3000%7C%7C%7C=Kgv%2BHkbO5HnFDPu22B2wz21HZYHUlt5CXRdkiv37Y
> Do%3D=0 Please help support this email list:
> http://www.qs/
> l.net%2Fdonate.html=05%7C01%7C%7C69e7a6fce5714a08d0bd08dbd6283cbe
> %7C84df9e7fe9f640afb435%7C1%7C0%7C638339240530852276%7CUnk
> nown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWw
> iLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=yJrpq5FvINNebVVeyItATXPYexCDFZhv
> Vlzh7WGkTHk%3D=0 Message delivered to mag...@rubidium.se
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to markmus...@outlook.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 discussion on groups.io

[Magnus Danielson via Elecraft]

How does one even get into them, I have not heard of these and if there 
is K4 knowledge there I would enjoy seeing that as a K4 owner. I had 
expected to find that here, but it's hard to find the little there is 
with all the other posts.


Cheers,
Magnus

On 2023-10-26 10:34, Dave wrote:

While separate groups for K1, K2, K3, K4, KX2, etc are up to whoever sets
them up, lets not forget the main product for Elecraft at the moment is the
K4, so why not discuss it on this open group that is run by Elecraft?

The K4 groups.io archive is closed to non members, which isn't helpful to
anyone who doesn't wish to join but merely wants more information on a
product.

73 Dave G4AON
K1, K2, KX3, K4D (#286), KPA500
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mag...@rubidium.se

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 discussion on groups.io

[Dave]

While separate groups for K1, K2, K3, K4, KX2, etc are up to whoever sets
them up, lets not forget the main product for Elecraft at the moment is the
K4, so why not discuss it on this open group that is run by Elecraft?

The K4 groups.io archive is closed to non members, which isn't helpful to
anyone who doesn't wish to join but merely wants more information on a
product.

73 Dave G4AON
K1, K2, KX3, K4D (#286), KPA500
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 AT tune problems with KAT500 firmware 213

[Andy Durbin]

"Yeah, I flashed to 2.13 from 1.75 this weekend, and at first things seemed to 
be OK, but last night when running the 80M SSB net, I kept having the tuning 
change unexpectedly and my KPA500 kept faulting out. "

Hard to make any useful comment without knowing a lot more about your 
configuration.   However, this is the first report I have seen of any 
regression with beta 2.13.  I'd suggest you email support and include your 
KAT500 config file.

I'd be happy to try to reproduce your problem but I don't use an Elecraft 
transceiver and can't test the AUXBus interface.  If you are not using AUXBus 
please say how your KAT500 is controlled and what KAT500 mode you use when 
operating.

Andy, k3wyc



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K4] K4 AT tune problems with KAT500 firmware 213

[Dave New, N8SBE]

Bob,

Yeah, I flashed to 2.13 from 1.75 this weekend, and at first things 
seemed to be OK, but last night when running the 80M SSB net, I kept 
having the tuning change unexpectedly and my KPA500 kept faulting out.  
This was the issue I was seeing on 2.05, which caused me to move back to 
1.75 several months ago.  I had not had any recent issues on 80M until 
re-flashing to 2.13.  It got so bad, that at some point, the K4D stopped 
putting out ANY power, and I had to re-boot the K4D to get my power 
back.  I don't use the TUNE LP, but rather hit the TUNE button on the 
KAT500, then tap TUNE on the K4D to start the tuning cycle.  The K4D ATU 
is bypassed.


No, I haven't erased all my KAT5000 tune memories - that would entail a 
lengthy re-learning process that I was not keen to do, yet.


There is definitely a change in tuning behavior going from 1.75 to 2.13, 
and at least for me, it's definitely NOT an improvement.


73,

-- Dave, N8SBE

On 2023-09-25 00:05, Bob Wilson - N6TV wrote:

Are you holding down TUNE LP for the entire tune cycle, waiting for a 
match?  That's not how it works.


Also, did you try clearing tuner memories as I previously suggested?  
Or using a dummy load?  It may help since the tuner may start the 
search at a poor match solution from memory.


Does the same problem happen if you use CW mode or FSK mode to produce 
a carrier (tap XMIT in FSK)?


If so, and if the K4 ATU bypassed, it sounds like you have found a new 
bug in the new KAT500 firmware that cannot be resolved by posting to 
this group.


Anyone else here using KAT500 Beta firmware 2.13?  Do you see the same 
problem?


Please report all the details to Elecraft support.  They may ask for a 
log trace if the KAT500 supports that.


Good luck.

73,
Bob, N6TV

On Sun, Sep 24, 2023, 8:48 PM Dave Barnes - WB4KDI  
wrote:


Bob the KAT500 tuner works perfectly with firmware 175.  Firmware 213 
seems to converge to an asymptotic reactance instead of 50 ohm match.  
The bad reactance is what causes the K4 to abort the tune cycle.  The 
KAT500 stays in tune unless I clear it.


I've checked everything else numerous times.  Yes the K4 tuner can 
find a match always with no problem,


Bob, the only thing I am changing is the KAT500 firmware.  No cables 
or settings on the K4 are changed.


Getting the hi swr message for tune mode and aborting the K4 tune 
cycle  is going to make it very hard to use an external tuner 
automatic or otherwise.  What does the K4 need to do about high swr in 
tune mode?


Unless there were some hardware changes to the KAT500 that I am 
unaware I suspect the KAT500 2xx firmware has a serious bug.


73,
Bob, N6TV
_._,_._,_
-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#26608) [1] | Reply To Group | Reply To Sender | 
Mute This Topic [2] | New Topic [3]
Your Subscription [4] | Contact Group Owner | Unsubscribe [5] 
[n8...@densbe.com]


_._,_._,_




Links:
--
[1] https://groups.io/g/Elecraft-K4/message/26608
[2] https://groups.io/mt/101567389/439435
[3] https://groups.io/g/Elecraft-K4/post
[4] https://groups.io/g/Elecraft-K4/editsub/439435
[5] 
https://groups.io/g/Elecraft-K4/leave/12322551/439435/1385384913/xyzzy

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 Production Software Rev. R34 Now Available

[Wayne Burdick]

Release 34 is being promoted to full-production status. This means it will be 
installed on all new K4s. We also encourage existing K4 owners to perform the 
update. The attached release notes provide a summary of all changes since the 
last production release (R33).

I'd like to thank all of our field testers and beta testers for their diligence 
in identifying issues that required attention. As a result, this is the best K4 
software yet.

73,
Wayne
N6KR



== R34 (PRODUCTION) 


Sept. 15, 2023


NOTE


The release notes below are a merge of all R33 beta 1/2/3/4 release notes, 
showing everything that has changed since the R33 production release.



NEW FEATURES


- SUPPLY OVER-VOLTAGE MEASUREMENT: If the K4's supply voltage is found to be 
excessive, an alert will be displayed. If the condition persists, the radio 
will be powered off for safety purposes. Note: Max supply voltage is specified 
as 15 V.

- ADDED "TX MONITOR METHOD, VOICE" menu entry: When this menu entry is set to 
"Fast", all speech processing effects and delays are removed from the voice 
monitor.

- UPDATED BUILT-IN OPERATING MANUAL TO REV C29: This edition includes a number 
of corrections suggested by K4 users.

- AGC SPEED SETTINGS: AGC speed (slow/fast) is now correctly stored per-mode 
rather than per-VFO or per-band. (Also see related bug fix below.)

- NEW APF BANDWIDTH: The CW audio peaking filter now has three settings: 30, 
50, and 150 Hz. The new 150 Hz setting allows APF to be used with faster code 
speeds.

- THREE QSK METHODS: The TX QSK Method menu entry now has three settings. 
Method 1 is unchanged from the last production release; it uses slightly longer 
mute times to create the cleanest possible QSK. Method 2 is the same as the 
original, except that it uses a new DSP algorithm that results in a bit more 
recovered audio. Method 3 is is the same as Method 2, except that some users 
report that it provides reduced artifacts (as compared to Method 2) when using 
the internal keyer at speeds of 47 WPM or higher. NOTE: With all three 
settings, the primary goal is to eliminate "clicks," "thumps," or other 
artifacts that may occur when operating near very strong signals (S9+). Such a 
signal must be present within +/- 2 kHz of the K4's VFO setting in order to 
evaluate the various QSK methods. Otherwise there are no artifacts at all.


-
BUG FIXES
-

- "NO RECORDED MESSAGE" BUG: When doing AF RECord, this message would be 
displayed if the recording filled the 90-second buffer.

- MESSAGE CHAIN/REPEAT FIX: CW/FSK/PSK chained and repeated messages are now 
correctly spaced.

- DETECTION OF ESC ON LOCAL KEYBOARD: With a local keyboard plugged into the K4 
for TX text entry, the ESC key now properly terminates messages.

- DIV LED now turns on if diversity is in effect at power-on.

- SOFTWARE UPDATE FIX: 'Check for Updates' now correctly updates all release 
selections with the latest revision numbers.

- TRANSMIT STATUS INFORMATION FIXED: Previously, in some cases power output 
would be displayed incorrectly, e.g. showing a nonzero value during receive.

- MSG REPEAT TRUNCATION FIXED: Previously, repeating a message with more than 
24 characters would result in truncation of some portion of the message. 
Messages can now be up to 60 characters.

- ELIMINATED "MOTORBOATING" (4 Hz cycling of transmitter when MIC gain = 80).

- ELIMINATED VOICE MODE POWER SPIKES: Previously, asserting PTT could lead to a 
brief spike in output power ahead of normal transmit audio.

- XVTR CONFIGURATION: Transverter configurations are now correctly maintained 
after software updates.

- XVTR QUICK MEMORIES: These now function correctly.

- DVR "NO RECORDED MESSAGE" bug fixed.

- DVR VOICE MESSAGE PLAYBACK CLICKS: The beginning and ending of buffers are 
now truncated by 21 ms to help mask any mic clicks recorded in the message.

- DVR CHAINING: Sometimes when chaining multiple messages, one of them may not 
have played, but the radio would have stay keyed up for the remaining time as 
if it were playing.

- AGC SETTINGS: A/B VFO swaps and copies no longer result in loss of the 
operator's AGC speed setting. Similarly, settings are no longer lost when the 
text decoder is used.

- TX ANTENNA SELECTION: TX ANT settings that are invalid, such as XV OUT on an 
HF band, are no longer allowed. Previously, it was possible to inadvertently 
get into this state with a remote-control command.

- TX GAIN SETTINGS: In rare cases, per-band transmit gain calibration data was 
becoming altered as a side-effect of a band change, swap, etc. This should no 
longer occur.


---
FOR SOFTWARE DEVELOPERS
---

- RU/RD COMMANDS: These encoder up/down simulation commands now work when the 
RIT/XIT offset knob is assigned 

Re: [Elecraft] K4 and Yamaha CM-500 Mic?

[George Danner]

Pete,
I'm using a CM500 that is a year or so old. It replaced one that finally
fell apart and I was tired of gluing it back together.
When I replaced the headset, I did not need to make any adjustments!

I went from a K3 to a K4 with the Yamaha headset plugged into the rear
connectors.
My Mic gain on the K4 is set at 12. TX rear mic configuration is Bias ON
Preamp OFF.

73 George AI4VZ



On Mon, Jul 31, 2023 at 9:32 AM Pete Smith N4ZR  wrote:

> My CM-500 is about 4 years old, and shedding ear-pads, but it works fine
> with my K3.
>
> 73, Pete N4ZR
>
> On 7/31/2023 6:52 AM, Alan Bloom wrote:
> > I had never used my CM-500 on a K3 so I can't do that comparison. But
> > on the K4 I had to turn on the internal mic preamp and set the mic
> > gain all the way to maximum.  That seemed to give about the correct
> > level - I could talk at normal loudness to get 5 on the ALC.
> >
> > I also use the CM-500 on my laptop to record a radio show.  I had to
> > turn up the gain close to max on the computer as well.  I think
> > late-production CM-500s just tend to have low microphone sensitivity.
> >
> > Alan
> >
> >
> > On 7/31/2023 1:40 AM, Oscar Staudt wrote:
> >> When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
> >> headphones from my K3, and plugged them into the back of my K4. I set
> >> the
> >> mic input to rear, and mic bias on.  I expected the mic to perform
> >> like it had in the K3.
> >>
> >>
> >> I attempted to get 3-5 bars of ALC by turning up the mic gain
> >> control.  Even
> >> with the gain up to 80, I’d have to speak *very* loudly to just get a
> >> flicker on the ALC meter.
> >>
> >>
> >> I then went back into the mic configuration and turned on the preamp
> >> (14dB).
> >> After that I could get  some ALC bars with the mic gain around 65 or
> >> more.  But
> >> I still  had to talk much louder than I had to with the same mic on
> >> the K3.
> >> (note:  mic level on the K3 was set around 7).
> >>
> >>
> >> Question:  Is it reasonable to expect that I’d have to have the mic
> >> gain at
> >> such a high level - and still have to talk louder than my normal (K3)
> >> level?
> >>
> >>
> >> BTW, I can hook up the MH-4, switch to front mic, and all works
> >> smooth with
> >> mic gain around 12.
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to a...@elecraft.com
> >>
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to pete.n...@gmail.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gdanne...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 and Yamaha CM-500 Mic?

[Pete Smith N4ZR]

My CM-500 is about 4 years old, and shedding ear-pads, but it works fine 
with my K3.


73, Pete N4ZR

On 7/31/2023 6:52 AM, Alan Bloom wrote:
I had never used my CM-500 on a K3 so I can't do that comparison. But 
on the K4 I had to turn on the internal mic preamp and set the mic 
gain all the way to maximum.  That seemed to give about the correct 
level - I could talk at normal loudness to get 5 on the ALC.


I also use the CM-500 on my laptop to record a radio show.  I had to 
turn up the gain close to max on the computer as well.  I think 
late-production CM-500s just tend to have low microphone sensitivity.


Alan


On 7/31/2023 1:40 AM, Oscar Staudt wrote:

When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4. I set 
the

mic input to rear, and mic bias on.  I expected the mic to perform
like it had in the K3.


I attempted to get 3-5 bars of ALC by turning up the mic gain 
control.  Even

with the gain up to 80, I’d have to speak *very* loudly to just get a
flicker on the ALC meter.


I then went back into the mic configuration and turned on the preamp 
(14dB).
After that I could get  some ALC bars with the mic gain around 65 or 
more.  But
I still  had to talk much louder than I had to with the same mic on 
the K3.

(note:  mic level on the K3 was set around 7).


Question:  Is it reasonable to expect that I’d have to have the mic 
gain at

such a high level - and still have to talk louder than my normal (K3)
level?


BTW, I can hook up the MH-4, switch to front mic, and all works 
smooth with

mic gain around 12.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to a...@elecraft.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pete.n...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 and Yamaha CM-500 Mic?

[Alan Bloom]

I had never used my CM-500 on a K3 so I can't do that comparison. But on 
the K4 I had to turn on the internal mic preamp and set the mic gain all 
the way to maximum.  That seemed to give about the correct level - I 
could talk at normal loudness to get 5 on the ALC.


I also use the CM-500 on my laptop to record a radio show.  I had to 
turn up the gain close to max on the computer as well.  I think 
late-production CM-500s just tend to have low microphone sensitivity.


Alan


On 7/31/2023 1:40 AM, Oscar Staudt wrote:

When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4.  I set the
mic input to rear, and mic bias on.  I expected the mic to perform
like it had in the K3.


I attempted to get 3-5 bars of ALC by turning up the mic gain control.  Even
with the gain up to 80, I’d have to speak *very* loudly to just get a
flicker on the ALC meter.


I then went back into the mic configuration and turned on the preamp (14dB).
After that I could get  some ALC bars with the mic gain around 65 or more.  But
I still  had to talk much louder than I had to with the same mic on the K3.
(note:  mic level on the K3 was set around 7).


Question:  Is it reasonable to expect that I’d have to have the mic gain at
such a high level - and still have to talk louder than my normal (K3)
level?


BTW, I can hook up the MH-4, switch to front mic, and all works smooth with
mic gain around 12.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to a...@elecraft.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 and Yamaha CM-500 Mic?

[Jim Brown]

On 7/30/2023 4:40 PM, Oscar Staudt wrote:

I attempted to get 3-5 bars of ALC by turning up the mic gain control.  Even
with the gain up to 80, I’d have to speak*very*  loudly to just get a
flicker on the ALC meter.


Do the headphones work?  Are you sure that the mic is plugged all the 
way into the jack?


73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 and Yamaha CM-500 Mic?

[David Herring]

Actually, I had (have) this very same problem and brought it up on here quite 
some time ago.  CM-500, mic and phones plugged into proper jacks on rear, 
preamp on, bias on, mic gain at max, mic right at my lips, and I still have to 
talk very loudly to get any response out of the ALC meter.  I got another 
CM-500 and swapped it in, and it was better…I didn’t have to talk as loud, but 
still way louder than I’d like or should have to. 

I never did puzzle out a solution for this.  So if I need or want to get on SSB 
and can’t talk loud (say like if the XYL is trying to sleep in the next room), 
I put another mic on the front connector and have no problems getting plenty of 
response out of that, even if talking in a hushed voice. 

Oscar, if you find a solution to this, please be sure to post it on here…I’d 
like for this work…failing that I might try someday to find a different 
headset/mic combo...

73,
Dave - N5DCH




> On Jul 30, 2023, at 6:17 PM, Mike Dodd  wrote:
> 
> On 7/30/2023 7:40 PM, Oscar Staudt wrote:
>> When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
>> headphones from my K3, and plugged them into the back of my K4.  I set the
>> mic input to rear, and mic bias on.  I expected the mic to perform
>> like it had in the K3.
>> I attempted to get 3-5 bars of ALC by turning up the mic gain control.  Even
>> with the gain up to 80, I’d have to speak *very* loudly to just get a
>> flicker on the ALC meter.
> 
> My CM500 mic is plugged into the rear mic jack. I turned on the 14dB preamp 
> and bias. With the front panel MIC set to 15, I get 5 on the ALC meter with a 
> normal voice -- no shouting or extra-loud is needed.
> 
> Don't know what's different, but those are my settings and result.
> 
> 73. Mike N4CF
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to david.n5...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 and Yamaha CM-500 Mic?

[Mike Dodd]

On 7/30/2023 7:40 PM, Oscar Staudt wrote:

When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4.  I set the
mic input to rear, and mic bias on.  I expected the mic to perform
like it had in the K3.


I attempted to get 3-5 bars of ALC by turning up the mic gain control.  Even
with the gain up to 80, I’d have to speak *very* loudly to just get a
flicker on the ALC meter.


My CM500 mic is plugged into the rear mic jack. I turned on the 14dB 
preamp and bias. With the front panel MIC set to 15, I get 5 on the ALC 
meter with a normal voice -- no shouting or extra-loud is needed.


Don't know what's different, but those are my settings and result.

73. Mike N4CF


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 and Yamaha CM-500 Mic?

[G4GNX]

This may sound like a silly question, but are you sure you have the plugs in 
the right way round? i.e. Not swapped over.

AFAIK this problem has not been reported on the K4 reflector and I know other 
folks are using them.

73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700




> On 31 Jul 2023, at 00:40, Oscar Staudt  wrote:
> 
> When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
> headphones from my K3, and plugged them into the back of my K4.  I set the
> mic input to rear, and mic bias on.  I expected the mic to perform
> like it had in the K3.
> 
> 
> I attempted to get 3-5 bars of ALC by turning up the mic gain control.  Even
> with the gain up to 80, I’d have to speak *very* loudly to just get a
> flicker on the ALC meter.
> 
> 
> I then went back into the mic configuration and turned on the preamp (14dB).
> After that I could get  some ALC bars with the mic gain around 65 or more.  
> But
> I still  had to talk much louder than I had to with the same mic on the K3.
> (note:  mic level on the K3 was set around 7).
> 
> 
> Question:  Is it reasonable to expect that I’d have to have the mic gain at
> such a high level - and still have to talk louder than my normal (K3)
> level?
> 
> 
> BTW, I can hook up the MH-4, switch to front mic, and all works smooth with
> mic gain around 12.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 and Yamaha CM-500 Mic?

[Oscar Staudt]

When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
headphones from my K3, and plugged them into the back of my K4.  I set the
mic input to rear, and mic bias on.  I expected the mic to perform
like it had in the K3.


I attempted to get 3-5 bars of ALC by turning up the mic gain control.  Even
with the gain up to 80, I’d have to speak *very* loudly to just get a
flicker on the ALC meter.


I then went back into the mic configuration and turned on the preamp (14dB).
After that I could get  some ALC bars with the mic gain around 65 or more.  But
I still  had to talk much louder than I had to with the same mic on the K3.
(note:  mic level on the K3 was set around 7).


Question:  Is it reasonable to expect that I’d have to have the mic gain at
such a high level - and still have to talk louder than my normal (K3)
level?


BTW, I can hook up the MH-4, switch to front mic, and all works smooth with
mic gain around 12.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K4] wtb SP4

[John Stengrevics]

Hi Darrell,

You may want to shop around for an SP3.  Same speaker on the inside.

73,

John
WA1EAZ

> On Jul 20, 2023, at 9:10 PM, Darrell - AB2E  wrote:
> 
> Hi All,
> Bought a nearly new K4D a few months back without a speaker, now Elecraft has 
> them backordered.
> Anyone have a spare, or one they would be willing to sell>?
> Contact me offlist a...@comcast.net <mailto:a...@comcast.net>
> 
> Thanks and 73,
> Darrell AB2E
> _._,_._,_
> Groups.io <http://groups.io/> Links:
> You receive all messages sent to this group.
> View/Reply Online (#25297) <https://groups.io/g/Elecraft-K4/message/25297> | 
> Reply To Group 
> <mailto:elecraft...@groups.io?subject=Re:%20%5BElecraft-K4%5D%20wtb%20SP4> | 
> Reply To Sender 
> <mailto:a...@hotmail.com?subject=Private:%20Re:%20%5BElecraft-K4%5D%20wtb%20SP4>
>  | Mute This Topic <https://groups.io/mt/100268567/4109964> | New Topic 
> <https://groups.io/g/Elecraft-K4/post> 
> Your Subscription <https://groups.io/g/Elecraft-K4/editsub/4109964> | Contact 
> Group Owner <mailto:elecraft-k4+ow...@groups.io> | Unsubscribe 
> <https://groups.io/g/Elecraft-K4/leave/12143145/4109964/851576545/xyzzy> 
> [jstengrev...@comcast.net <mailto:jstengrev...@comcast.net>]
> _._,_._,_

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K4] Elecraft 80M SSB Net Announcement

[Dave New, N8SBE]

Alan,

Yes, 80M being what it is even at 9PM in the evening here in Michigan.  
I'm afraid so.


If anyone would care to start up a west coast net later in the evening, 
they are perfectly welcome to.


Note that there are 20M and 40M nets earlier in the day.  In particular 
the 20M net gets check ins from both coasts, and sometimes from Great 
Britain and New Zealand, depending on conditions.


See this post from Carl, K8NU, regarding the SSB Nets and the weekly 
Zoom meeting:


https://groups.io/g/Elecraft-K4/message/25119

73,

-- Dave, N8SBE

On 2023-07-16 21:39, Alan AD6E wrote:


Must be an east coast local net. 0100Z is mid-afternoon here.
73, Alan  AD6E / KH6TU

On Sun, Jul 16, 2023 at 1:44 PM Dave New - N8SBE  
wrote:



Please join us on 3784 kHz (NOTE THE NEW FREQUENCY), 9PM ET Sunday
(0100Z Monday). Note that the net stays on the same local time, when 
we

switch back and forth to/from Daylight time, so the UTC time changes,
but not the local time.

Now that we have moved into Daylight time and have longer daylight
hours, 80M may not be as strong as during the winter.

Your net control this week will be Dave, N8SBE.

Hope to see you this evening on the net.

73,

-- Dave, N8SBE


_._,_._,_
-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#25236) [1] | Reply To Group | Reply To Sender | 
Mute This Topic [2] | New Topic [3]
Your Subscription [4] | Contact Group Owner | Unsubscribe [5] 
[n8...@densbe.com]


_._,_._,_




Links:
--
[1] https://groups.io/g/Elecraft-K4/message/25236
[2] https://groups.io/mt/100185671/439435
[3] https://groups.io/g/Elecraft-K4/post
[4] https://groups.io/g/Elecraft-K4/editsub/439435
[5] 
https://groups.io/g/Elecraft-K4/leave/12322551/439435/1385384913/xyzzy

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K4] Elecraft 80M SSB Net Announcement

[Dave New, N8SBE]

Rick,

Understood.  We've almost never gotten any check ins much west of Texas. 
 It would be great to get more folks in the middle of the continent to 
act as relays, to help pull in West Coast folks, etc.


Sorry we couldn't hook up.

73.
-- Dave, N8SBE

On 2023-07-09 18:28, Richard (Rick) Karlquist - N6RK wrote:
Out here on the left coast, your net starts 2 to 3+ hours before sunset 
(depending on latitude) at this time of year.  80 isn't really open 
then.


Rick N6RK

On 7/9/2023 2:03 PM, Dave New - N8SBE wrote:
Please join us on 3784 kHz (NOTE THE NEW FREQUENCY), 9PM ET Sunday 
(0100Z Monday). Note that the net stays on the same local time, when 
we



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#25045): 
https://groups.io/g/Elecraft-K4/message/25045

Mute This Topic: https://groups.io/mt/100047070/439435
Group Owner: elecraft-k4+ow...@groups.io
Unsubscribe: 
https://groups.io/g/Elecraft-K4/leave/12322551/439435/1385384913/xyzzy 
[n8...@densbe.com]

-=-=-=-=-=-=-=-=-=-=-=-

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[David Gilbert]

He never said what kind of antenna he was using.   A lossy antenna is 
much worse on transmit than it is on receive.  You can easily tolerate 
20 dB or more loss on receive (for pretty much ANY rig) ... but not on 
transmit, especially in a contest like FD where there is tons of QRM on 
the other end.


The K4 is a very fine rig, but not because of anything he claimed.

73,
Dave   AB7E



On 7/2/2023 11:03 AM, George Thornton wrote:

That was not my experience.

Right out the bat we were occupying a frequency and calling.  We were heard so 
well we found ourselves at the bottom of a pileup for the next two or more 
hours.

You might want to take a closer look at your various mic and transmitter 
settings.  These have to be adjusted correctly for maximum effect.



-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of David Fifield
Sent: Saturday, June 24, 2023 6:29 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K4 Rx is awesome...

I’ve been using my K4 at 100W (per the FD rules) this afternoon on several 
bands.
I am 1D OR.
I can hear many many stations but hardly any of them can hear me.
To me, this means that the K4 Rx is bomb-proof, sensitive, selective, and just, 
well, awesome.
If the other stations had better receivers, they might be able to hear me 
calling them.
They are obviously bogged down with on-site overload/spurii/phase noise etc.
What a pity.
I gave up replying hopelessly to CQFD’s from other 100W stations and went and 
did some woodworking instead.
Much more satisfying. Oh well….

73, Dave AD6A
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to gthorn...@thorntonmostullaw.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ab7e...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[George Thornton]

That was not my experience.  

Right out the bat we were occupying a frequency and calling.  We were heard so 
well we found ourselves at the bottom of a pileup for the next two or more 
hours.

You might want to take a closer look at your various mic and transmitter 
settings.  These have to be adjusted correctly for maximum effect.



-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of David Fifield
Sent: Saturday, June 24, 2023 6:29 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K4 Rx is awesome...

I’ve been using my K4 at 100W (per the FD rules) this afternoon on several 
bands.
I am 1D OR.
I can hear many many stations but hardly any of them can hear me.
To me, this means that the K4 Rx is bomb-proof, sensitive, selective, and just, 
well, awesome.
If the other stations had better receivers, they might be able to hear me 
calling them. 
They are obviously bogged down with on-site overload/spurii/phase noise etc. 
What a pity. 
I gave up replying hopelessly to CQFD’s from other 100W stations and went and 
did some woodworking instead.
Much more satisfying. Oh well….

73, Dave AD6A
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to gthorn...@thorntonmostullaw.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Mike Cizek W0VTT]

N6KR wrote:

 

Of course this is not the way to hold and run a frequency.

 

***No, you would have to run while doing that, and then your writing would not 
be legible.  Maybe use the Voice Notes app on your cell phone?  浪

 

---

73,

Mike Cizek WØVTT

 

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Wayne Burdick
Sent: Wednesday, 28 June, 2023 17:03
To: Robert Strickland 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] K4 Rx is awesome...

 

CW is also the only way to go for pedestrian mobile FD, which I did for a 
couple of hours while hiking on Saturday. Even with a 4' whip and 5 watts I was 
working almost every station I called. I stopped long enough to log each QSO so 
my printing would be legible.

 

Of course this is not the way to hold and run a frequency.

 

Wayne

N6KR

 

 

> On Jun 28, 2023, at 1:14 PM, Robert Strickland via Elecraft < 
> <mailto:elecraft@mailman.qth.net> elecraft@mailman.qth.net> wrote:

> 

> Jim...

> 

> I gave up on all SSB contesting long ago. To my ears and preferences, it's 
> just a pile of gibberish with maybe one very strong/clear signal every 
> 10-20Kc. Not worth it. CW is the only way to contest IMHO. While I've never 
> operated QRP, I suspect that I'm headed in that direction, also.

> 

> ...robert KE2WY

> 

> On 6/25/2023 19:37, Jim Brown wrote:

>> On 6/25/2023 7:19 AM, Al Lorona wrote:

>>> I went to CW after this and found the operating to be a lot better.

>> I gave up on SSB on FD more than ten years ago. Instead, have been doing FD 
>> QRP with W6GJB and W6JTI. There are still guys who haven't been on the air 
>> in the year between, and some long pauses after a QSO, but that's the 
>> exception.

>> 73, Jim K9YC

 

 

 

__

Elecraft mailing list

Home:  <http://mailman.qth.net/mailman/listinfo/elecraft> 
http://mailman.qth.net/mailman/listinfo/elecraft

Help:  <http://mailman.qth.net/mmfaq.htm> http://mailman.qth.net/mmfaq.htm

Post:  <mailto:Elecraft@mailman.qth.net> mailto:Elecraft@mailman.qth.net

 

This list hosted by:  <http://www.qsl.net> http://www.qsl.net

Please help support this email list:  <http://www.qsl.net/donate.html> 
http://www.qsl.net/donate.html Message delivered to  <mailto:mgci...@gmail.com> 
mgci...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Wayne Burdick]

CW is also the only way to go for pedestrian mobile FD, which I did for a 
couple of hours while hiking on Saturday. Even with a 4' whip and 5 watts I was 
working almost every station I called. I stopped long enough to log each QSO so 
my printing would be legible.

Of course this is not the way to hold and run a frequency.

Wayne
N6KR


> On Jun 28, 2023, at 1:14 PM, Robert Strickland via Elecraft 
>  wrote:
> 
> Jim...
> 
> I gave up on all SSB contesting long ago. To my ears and preferences, it's 
> just a pile of gibberish with maybe one very strong/clear signal every 
> 10-20Kc. Not worth it. CW is the only way to contest IMHO. While I've never 
> operated QRP, I suspect that I'm headed in that direction, also.
> 
> ...robert KE2WY
> 
> On 6/25/2023 19:37, Jim Brown wrote:
>> On 6/25/2023 7:19 AM, Al Lorona wrote:
>>> I went to CW after this and found the operating to be a lot better.
>> I gave up on SSB on FD more than ten years ago. Instead, have been doing FD 
>> QRP with W6GJB and W6JTI. There are still guys who haven't been on the air 
>> in the year between, and some long pauses after a QSO, but that's the 
>> exception.
>> 73, Jim K9YC



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Robert Strickland via Elecraft]

Jim...

I gave up on all SSB contesting long ago. To my ears and preferences, 
it's just a pile of gibberish with maybe one very strong/clear signal 
every 10-20Kc. Not worth it. CW is the only way to contest IMHO. While 
I've never operated QRP, I suspect that I'm headed in that direction, also.


...robert KE2WY

On 6/25/2023 19:37, Jim Brown wrote:

On 6/25/2023 7:19 AM, Al Lorona wrote:

I went to CW after this and found the operating to be a lot better.


I gave up on SSB on FD more than ten years ago. Instead, have been doing 
FD QRP with W6GJB and W6JTI. There are still guys who haven't been on 
the air in the year between, and some long pauses after a QSO, but 
that's the exception.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rc...@verizon.net


--
Robert G. Strickland, PhD ABPH KE2WY
rc...@verizon.net
Syracuse, New York FN13xa
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Walter Underwood]

Some practices vary with the type of contact—casual, contest, organized program 
(SOTA/POTA), event (JOTA, Field Day), DXpedition—and some are just good 
practices. This document is a good consensus description, with a lean towards 
contesting and DXpedition practices. It is called “Ethics and Operating 
Procedures for the Radio Amateur” and was developed by experience European hams.


https://www.iaru-r1.org/wp-content/uploads/2021/01/Eth-operating-IARU-ENGLISH-version3-2010-amended-2021.pdf

I also recommend the ARRL Operating Manual, though I haven’t read a recent 
edition. I actually have it ready to pick up at my library right now.

https://home.arrl.org/action/Store/Product-Details/productId/114292

The numbers are usually “serial numbers”. They start with 1 for your first 
contact and increase with each contact.

http://www.arrl.org/contest-basics
https://www.qsl.net/zs1an/contesting_faq.html

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)


> On Jun 27, 2023, at 7:53 AM, Karl W Hubbard via Elecraft 
>  wrote:
> 
> I tried driving out to my local ham fest location as indicated on the ARRL 
> website, but no one was there, and then went to the past site at the high 
> school football  stadium. No one was there either. 
> I consider my self a newby, don’t even know the etiquette for contests or 
> “interrupting” some SSB rag chews I hear on my KX3. People might assume on a 
> look up on QRZ that I am an “experienced” ham and conclude that I’m one of 
> those A h0l*s. I am  still having to hold a copy of the ARRL band plan in my 
> left hand as I dial in frequencies and bands with my right! Reading the 
> instructions as I go. No Elmer’s here. 
>  Questions like: Do you or if so why do some repeat both call signs of 
> participants of a QSO vs just your own? Are the numbers at the conclusion of 
> a QSO “ you’re number 28” assigned by the contestant just a way of confirming 
> or tabulating a QSO?
> I guess it’s similar to talking to air traffic control with flying. Most of 
> ATC conversation with rapid fire instructions is anticipation, but even then 
> I had trouble reading back directions and squawk numbers etc. I think I must 
> have some auditory dyslexia, even though my age adjusted frequencies of 
> hearing are very good. 
> I am limited by my antenna arrangement, and thus ability to transmit 
> effectively with 100W running through my KPA100. I would think it becomes a 
> sort of chicken or the egg issue when it comes to QSOs if you have availed 
> yourself of all reasonable antenna options (but  I am not erecting a 60 foot 
> tower in the back of my building  or mounting my 30 ft MFJ mast with 24 
> ground radials spread over the parking lot) and the only weapon left is 
> transmission power. But the easier it is for people to hear you, the more 
> enjoyable the radio can be and your communication skills snowball. I’m 68, 
> and in excellent health, so hopefully I might have a few years at it. I am 
> looking at taking the plunge next year and getting the K4D and the KPA1500 
> but want to increase my knowledge base and will need to upgrade my Buckmaster 
> 300W 7 band OCFD currently in use to the 3000 W version. I cheat on CW with 
> keyboard encoding and decoding on the KPX3 set at 15 WPM  although all I seem 
> to get on the KX3 is decoded gibberish**E*EE ** etc.
> Finally, how much more sensitive is the K4 for signal reception compared to 
> the fully filtered  KX3?
> 73’s 
> Karl. AF5LQ
> 
> 
> Sent from Yahoo Mail for iPhone
> 
> 
> On Tuesday, June 27, 2023, 5:34 AM, Doug Turnbull  wrote:
> 
> Jan,
> You are an inspiration to this 79 year old.I like the city lot
> idea as well.Keep pounding the brass in good health.
> 
> 73 Doug EI2CN
> 
> On Tue 27 Jun 2023, 02:29 Jim Brown,  wrote:
> 
>> On 6/26/2023 2:01 PM, Jan wrote:
>>> The K4/at is a delight to operate anytime; this last weekend it was used
>> 
>>> Thanks to the hundred that I had exchanges with
>>> 
>>> 73, Jan K1ND
>>> 
>>> PS: At 86 years of age it was fun!
>> 
>> At W6BX, W6JTI and I, also octogenarians, worked you on at least one
>> band. We were QRP with a K3/P3/SVGA, with the entire station on battery
>> power.
>> 
>> 73, Jim K9YC
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to turnb...@net1.ie
>> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered 

Re: [Elecraft] K4 Rx is awesome...

[Karl W Hubbard via Elecraft]

I tried driving out to my local ham fest location as indicated on the ARRL 
website, but no one was there, and then went to the past site at the high 
school football  stadium. No one was there either. 
I consider my self a newby, don’t even know the etiquette for contests or 
“interrupting” some SSB rag chews I hear on my KX3. People might assume on a 
look up on QRZ that I am an “experienced” ham and conclude that I’m one of 
those A h0l*s. I am  still having to hold a copy of the ARRL band plan in my 
left hand as I dial in frequencies and bands with my right! Reading the 
instructions as I go. No Elmer’s here. 
 Questions like: Do you or if so why do some repeat both call signs of 
participants of a QSO vs just your own? Are the numbers at the conclusion of a 
QSO “ you’re number 28” assigned by the contestant just a way of confirming or 
tabulating a QSO?
I guess it’s similar to talking to air traffic control with flying. Most of ATC 
conversation with rapid fire instructions is anticipation, but even then I had 
trouble reading back directions and squawk numbers etc. I think I must have 
some auditory dyslexia, even though my age adjusted frequencies of hearing are 
very good. 
I am limited by my antenna arrangement, and thus ability to transmit 
effectively with 100W running through my KPA100. I would think it becomes a 
sort of chicken or the egg issue when it comes to QSOs if you have availed 
yourself of all reasonable antenna options (but  I am not erecting a 60 foot 
tower in the back of my building  or mounting my 30 ft MFJ mast with 24 ground 
radials spread over the parking lot) and the only weapon left is transmission 
power. But the easier it is for people to hear you, the more enjoyable the 
radio can be and your communication skills snowball. I’m 68, and in excellent 
health, so hopefully I might have a few years at it. I am looking at taking the 
plunge next year and getting the K4D and the KPA1500 but want to increase my 
knowledge base and will need to upgrade my Buckmaster 300W 7 band OCFD 
currently in use to the 3000 W version. I cheat on CW with keyboard encoding 
and decoding on the KPX3 set at 15 WPM  although all I seem to get on the KX3 
is decoded gibberish**E*EE ** etc.
Finally, how much more sensitive is the K4 for signal reception compared to the 
fully filtered  KX3?
73’s 
Karl. AF5LQ


Sent from Yahoo Mail for iPhone


On Tuesday, June 27, 2023, 5:34 AM, Doug Turnbull  wrote:

Jan,
    You are an inspiration to this 79 year old.    I like the city lot
idea as well.    Keep pounding the brass in good health.

73 Doug EI2CN

On Tue 27 Jun 2023, 02:29 Jim Brown,  wrote:

> On 6/26/2023 2:01 PM, Jan wrote:
> > The K4/at is a delight to operate anytime; this last weekend it was used
>
> > Thanks to the hundred that I had exchanges with
> >
> > 73, Jan K1ND
> >
> > PS: At 86 years of age it was fun!
>
> At W6BX, W6JTI and I, also octogenarians, worked you on at least one
> band. We were QRP with a K3/P3/SVGA, with the entire station on battery
> power.
>
> 73, Jim K9YC
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to turnb...@net1.ie
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to karlwhubb...@yahoo.com 



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Doug Turnbull]

Jan,
 You are an inspiration to this 79 year old.I like the city lot
idea as well.Keep pounding the brass in good health.

73 Doug EI2CN

On Tue 27 Jun 2023, 02:29 Jim Brown,  wrote:

> On 6/26/2023 2:01 PM, Jan wrote:
> > The K4/at is a delight to operate anytime; this last weekend it was used
>
> > Thanks to the hundred that I had exchanges with
> >
> > 73, Jan K1ND
> >
> > PS: At 86 years of age it was fun!
>
> At W6BX, W6JTI and I, also octogenarians, worked you on at least one
> band. We were QRP with a K3/P3/SVGA, with the entire station on battery
> power.
>
> 73, Jim K9YC
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to turnb...@net1.ie
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Jim Brown]

On 6/26/2023 2:01 PM, Jan wrote:
The K4/at is a delight to operate anytime; this last weekend it was used 



Thanks to the hundred that I had exchanges with

73, Jan K1ND

PS: At 86 years of age it was fun!


At W6BX, W6JTI and I, also octogenarians, worked you on at least one 
band. We were QRP with a K3/P3/SVGA, with the entire station on battery 
power.


73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Jan]

The K4/at is a delight to operate anytime; this last weekend it was used 
in the /Field Day Event/


I ran mine @ 20watts on 40 & 80 meters CW via a wire dipole on a city lot///
/

Simple setup with memories programed /~  I/ /had a ball///

Thanks to the hundred that I had exchanges with

73, Jan K1ND

PS: At 86 years of age it was fun!//


/
/


--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[john]

Interesting conclusion.  



David Fifield AD6A wrote:

I've been using my K4 at 100W (per the FD rules) this afternoon on several
bands.
I am 1D OR.
I can hear many many stations but hardly any of them can hear me.
To me, this means that the K4 Rx is bomb-proof, sensitive, selective, and
just, well, awesome.
If the other stations had better receivers, they might be able to hear me
calling them. 
They are obviously bogged down with on-site overload/spurii/phase noise etc.

What a pity. 
I gave up replying hopelessly to CQFD's from other 100W stations and went
and did some woodworking instead.
Much more satisfying. Oh well..

73, Dave AD6A

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Jim Brown]

On 6/25/2023 7:19 AM, Al Lorona wrote:

I went to CW after this and found the operating to be a lot better.


I gave up on SSB on FD more than ten years ago. Instead, have been doing 
FD QRP with W6GJB and W6JTI. There are still guys who haven't been on 
the air in the year between, and some long pauses after a QSO, but 
that's the exception.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Al Lorona]

> I can hear many many stations but hardly any of them can hear me.
The most likely reason for this is operator inexperience, which is a perennial 
problem on Field Day. It's great that lots of people who don't usually get on 
the air, get on the air... but the side effect of this is a lot of really poor 
operating habits.

The biggest problem this year, in my opinion, was not identifying at the end of 
each contact. Many ops who were running on a frequency simply would acknowledge 
receipt of the exchange, then just stop transmitting and listen for the next 
caller. Here's an example:

W4---: CQ Field Day, this is W4---.
W3--: This is W3--.
W4---: W3--, I'm 2A Georgia.
W3--:  Thanks, I'm 4A Western Pennsylvania.
W4---: Got your 4A Western Pennsylvania. Good luck in Field Day!


See the problem? This would sometimes continue for 5, 6, or 7 contacts, with 
the W4 never sending his own call. So, be me for a minute: there I am, waiting 
to call the W4, except I don't know he's a W4 because he hasn't said so, and 
neither has anybody else. After the first 20 or 30 times this happened, I 
stopped waiting around for these stations to finally identify themselves.

Once, when this happened for about 6 contacts while I waited around to work a 
strong station in Georgia who refused to identify, I became frustrated and 
transmitted, "Hey, Old Man, you need to ID after each contact!"  The guy 
immediately came back, "Let me tell you, young man, that we're all Extra class 
operators here who finish in the Top 10 every year, so you're not going to 
lecture me on how I should operate!"

I went to CW after this and found the operating to be a lot better. I still 
heard the problem I just described, but not as frequently as on phone.
Another common malpractice was people who were calling CQ, and who would 
receive a response to their CQ, but then would tell the caller to send his 
exchange first. This isn't the way you do it. The CQing station always sends 
its exchange first, then turns it over to the calling station, so that the 
CQing station can acknowledge receipt, identify, and stand by for another 
caller.

I feel like we go over this after every Field Day, and nothing has ever 
changed. I feel like Get Off My Lawn Guy right now.

If you're in a club that's planning a Field Day operation, you need to take the 
April or May club meeting and help people practice the Field Day exchange 
protocol with mock QSOs. It's getting really bad on the phone bands during 
Field Day.
(I didn't mean to subtract from your enjoyment of your new K4. I hope it turns 
out to be a great rig for you for many years.)

Regards,

Al  W6LX



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[David Gilbert]

That falls more under the category of lore than science.  By all 
accounts the K4 has a terrific receiver, but of the several possible 
reasons for what you experienced your receiver is at least a couple 
notches down the list.


73
Dave   AB7E


On 6/24/2023 6:28 PM, David Fifield wrote:

I’ve been using my K4 at 100W (per the FD rules) this afternoon on several 
bands.
I am 1D OR.
I can hear many many stations but hardly any of them can hear me.
To me, this means that the K4 Rx is bomb-proof, sensitive, selective, and just, 
well, awesome.
If the other stations had better receivers, they might be able to hear me 
calling them.
They are obviously bogged down with on-site overload/spurii/phase noise etc.
What a pity.
I gave up replying hopelessly to CQFD’s from other 100W stations and went and 
did some woodworking instead.
Much more satisfying. Oh well….

73, Dave AD6A


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 Rx is awesome...

[Jim Brown]

On 6/24/2023 6:28 PM, David Fifield wrote:

I can hear many many stations but hardly any of them can hear me.


Two likely reasons. 1) their receive noise; 2) your antennas.

73, Jim K9YC


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 Rx is awesome...

[David Fifield]

I’ve been using my K4 at 100W (per the FD rules) this afternoon on several 
bands.
I am 1D OR.
I can hear many many stations but hardly any of them can hear me.
To me, this means that the K4 Rx is bomb-proof, sensitive, selective, and just, 
well, awesome.
If the other stations had better receivers, they might be able to hear me 
calling them. 
They are obviously bogged down with on-site overload/spurii/phase noise etc. 
What a pity. 
I gave up replying hopelessly to CQFD’s from other 100W stations and went and 
did some woodworking instead.
Much more satisfying. Oh well….

73, Dave AD6A
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K4] K4D with KAT4 Tuner

[James Bennett via Elecraft]

OK - surprised, I am - not one single offer for my K4D that I posted on 
Tuesday. So, I suppose I need to lower my expectations (and price). 

The K4D with internal KAT4 tuner is now for sale for $5,500, no tax, free 
shipping to any USA address.


Jim Bennett / K7TXA at Arrl dot net
Eagle, ID





> On May 2, 2023, at 12:13 PM, James Bennett - W6JHB via groups.io 
>  wrote:
> 
> Folks,
> 
> After a lot of “should I / shouldn’t I” discussions with myself I’ve come to 
> the conclusion that I probably should let go of my K4D, serial number 636. It 
> has the KAT4 internal auto-tuner in it. It was put into service in April of 
> 2022 and has been here at my home, in a non-smoking environment ever since. 
> It works perfectly, has no scratches or dents. The majority of its use has 
> been on CW, with perhaps ten percent of my QSOs being FT8. I’ve had it 
> connected to a KPA500/KAT500 since installation last year.
> 
> A brand new K4D with KAT4 will run you $6,480 plus any applicable sales tax. 
> In the state of Idaho (6 percent rate) that would come out to another $388, 
> so buying a new one here would set you back $6,868. Plus…. You’ll have to 
> wait for shipment - not sure what the current backlog is at Elecraft.
> 
> I’ll sell this one for an even $6,100, NO TAX, FREE SHIPPING (in the original 
> Elecraft cartons) the day after payment made to any USA address. I prefer 
> Paypal Friends and Relatives but would also accept a cashier’s check. Please 
> let me know if you are interested. :-)
> 
> Also posting this on the K4 Groups.io <http://groups.io/> site.
> 
> 
> Jim Bennett / K7TXA
> Eagle, ID
> 
> SKCC #10447
> B.U.G. #301
> 
> 
> 
> 
> 
> 
> -- 
> Jim / K7TXA
> Eagle, ID
> 
> SKCC 10447
> BUG 301
> _._,_._,_
> Groups.io Links:
> You receive all messages sent to this group.
> 
> View/Reply Online (#23526) <https://groups.io/g/Elecraft-K4/message/23526> | 
> Reply To Group 
> <mailto:elecraft...@groups.io?subject=Re:%20%5BElecraft-K4%5D%20FS%3A%20K4D%20with%20KAT4%20Tuner>
>  | Reply To Sender 
> <mailto:w6...@me.com?subject=Private:%20Re:%20%5BElecraft-K4%5D%20FS%3A%20K4D%20with%20KAT4%20Tuner>
>  | Mute This Topic <https://groups.io/mt/98645080/7314076> | New Topic 
> <https://groups.io/g/Elecraft-K4/post>
> Your Subscription <https://groups.io/g/Elecraft-K4/editsub/7314076> | Contact 
> Group Owner <mailto:elecraft-k4+ow...@groups.io> | Unsubscribe 
> <https://groups.io/g/Elecraft-K4/leave/11370287/7314076/1686017996/xyzzy> 
> [w6...@me.com]
> 
> _._,_._,_

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 pre order

[w4sc]

Ordered K4D w/KAT4 4/4/23; PIA.  Quoted shipment 15 – 20 WORKING days …. 
Patiently QRX .,,,

de Ben W4SC

Sent from Mail for Windows

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 pre order

[Neil Zampella]

Eric,

now that it looks the K4-F is finally on a production schedule, any 
hints on when there will be a K4-K ??


Thanks,

Neil, KN3ILZ

On 4/13/2023 3:18 PM, Eric Swartz wrote:

Hi Rick,

It looks like your K4D shipped today. :-)

We're also working hard to ship a lot this week and next so we can catch up
with the rest of the backlog and have some K4Ds to sell from our booth at
the Visalia International DX convention (weekend after next).  See you all
there!

73,
Eric
*elecraft.com *


On Thu, Apr 13, 2023 at 12:39 PM NJ5W Rick  wrote:


Ordered mine Mar 7th, still waiting. So not quite down to 4 weeks yet.
Hopefully mine will arrive sometime this week.


Rick NJ5W


On Thu, Apr 13, 2023 at 1:36 PM Jim Rhodes  wrote:


The wait time is down to 3-4 weeks, so not as big a deal as 2 years ago.
Ordered mine in Jan and had it within 4 weeks.

On Thu, Apr 13, 2023, 13:18 Dean L/ K2WW  wrote:


Is it possible to " Buy" someone who is impatiently waiting and

pre-paid

for their K4, and change the shipping info?
Reminds me of the lunch line in High School, ahead back ahead
If it is, I'm your Huckleberry

73
Dean K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jimk...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rreynold...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric.swa...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 pre order

[Rich WC3T]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 pre order

[Eric Swartz]

Hi Rick,

It looks like your K4D shipped today. :-)

We're also working hard to ship a lot this week and next so we can catch up
with the rest of the backlog and have some K4Ds to sell from our booth at
the Visalia International DX convention (weekend after next).  See you all
there!

73,
Eric
*elecraft.com *


On Thu, Apr 13, 2023 at 12:39 PM NJ5W Rick  wrote:

> Ordered mine Mar 7th, still waiting. So not quite down to 4 weeks yet.
> Hopefully mine will arrive sometime this week.
>
>
> Rick NJ5W
>
>
> On Thu, Apr 13, 2023 at 1:36 PM Jim Rhodes  wrote:
>
> > The wait time is down to 3-4 weeks, so not as big a deal as 2 years ago.
> > Ordered mine in Jan and had it within 4 weeks.
> >
> > On Thu, Apr 13, 2023, 13:18 Dean L/ K2WW  wrote:
> >
> > > Is it possible to " Buy" someone who is impatiently waiting and
> pre-paid
> > > for their K4, and change the shipping info?
> > > Reminds me of the lunch line in High School, ahead back ahead
> > > If it is, I'm your Huckleberry
> > >
> > > 73
> > > Dean K2WW
> > > __
> > > Elecraft mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Elecraft@mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> > > Message delivered to jimk...@gmail.com
> > >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to rreynold...@gmail.com
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.swa...@elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 pre order

[NJ5W Rick]

Ordered mine Mar 7th, still waiting. So not quite down to 4 weeks yet.
Hopefully mine will arrive sometime this week.


Rick NJ5W


On Thu, Apr 13, 2023 at 1:36 PM Jim Rhodes  wrote:

> The wait time is down to 3-4 weeks, so not as big a deal as 2 years ago.
> Ordered mine in Jan and had it within 4 weeks.
>
> On Thu, Apr 13, 2023, 13:18 Dean L/ K2WW  wrote:
>
> > Is it possible to " Buy" someone who is impatiently waiting and pre-paid
> > for their K4, and change the shipping info?
> > Reminds me of the lunch line in High School, ahead back ahead
> > If it is, I'm your Huckleberry
> >
> > 73
> > Dean K2WW
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to jimk...@gmail.com
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rreynold...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 pre order

[Jim Rhodes]

The wait time is down to 3-4 weeks, so not as big a deal as 2 years ago.
Ordered mine in Jan and had it within 4 weeks.

On Thu, Apr 13, 2023, 13:18 Dean L/ K2WW  wrote:

> Is it possible to " Buy" someone who is impatiently waiting and pre-paid
> for their K4, and change the shipping info?
> Reminds me of the lunch line in High School, ahead back ahead
> If it is, I'm your Huckleberry
>
> 73
> Dean K2WW
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 pre order

[Dean L/ K2WW]

Is it possible to " Buy" someone who is impatiently waiting and pre-paid
for their K4, and change the shipping info?
Reminds me of the lunch line in High School, ahead back ahead
If it is, I'm your Huckleberry

73
Dean K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 production software rev. R33 now available

[Wayne Burdick]

[This was also posted to the K4 forum.]

* * *

Beta testing of rev. R33.BETA2 has gone very well, so we're promoting it to 
full-production status (R33.PRODUCTION). This means it will be installed on all 
new K4s. We also encourage existing K4 owners to perform the update. 

The "big-ticket" item is much improved T/R characteristics. This benefits all 
modes, but it's most noticeable in CW.

Important notes:

- The release notes below start with the items from R33.BETA2. Scroll to the 
bottom to see the notes from R33.BETA1.

- Use the Fn > SW UPDATE function to install new software. Select "Production 
Release" from the pull-down menu at the upper left corner of the update screen, 
then tap "Check for Updates." If you don't immediately see the R33 production 
release become available, do "Check for Updates" a second time. (The update may 
take several minutes due to load-time requirements of various software 
elements.)

- If you’re using an amplifier, you’ll want to set up the new “TX DLY, Unkey to 
Receive” menu entry. See the NEW MENU ENTRIES section below for full details 
and suggested settings. 

73,
Wayne
N6KR


==
== R33.PRODUCTION 
==

April 11, 2023



NEW FEATURES


- MOUSE POINTER SELECTIONS:  There are now 3 different mouse pointer sizes and 
2 different colors (total of 6 combinations). See MENU: Mouse Pinter Size, LCD 
and MENU: Mouse Pointer Size, Ext. Mon.

- OPERATING MANUAL REVISED:  The built-in operating manual is now at rev. C27. 
It includes the new T/R related menu entries (see below) and various other 
updates.


-
BUG FIXES
-

- CW RECEIVE ARTIFACTS DURING T/R ELIMINATED:  In previous releases, keying the 
K4 in the presence of large signals, especially while driving an external 
amplifier, could cause "pops" or "clicks" in the K4's audio on key-up. This has 
been corrected via fixed bugs and two new menu entries (see NEW MENU ENTRIES 
section, below).

- CLICKS ON CHANGE IN MODE/BAND/ETC. ELIMINATED:  In previously releases, 
changing some settings resulted in audible clicks, especially when in FM mode.

- FM SQUELCH RANGE RESTORED:  The original FM squelch range has been restored. 
Previously, the NB filters were being incorrectly applied in FM mode.

- SSB BANDWIDTH ERRORS CORRECTED:  SSB receive bandwidth is no longer subject 
to erroneous narrowing by NB filters under any circumstances. The NB filters 
are now applied optimally for QRM rejection purposes in all modes.

- MENU PARAMETER VALUES ADJUST CORRECTLY:  In the last FT release, parameters 
wrapped on all menu entries as VFO A was rotated. They now have stops at the 
low and high ends of their ranges. The values also now go UP with clockwise 
rotation.

- MANUAL NOTCH LOSS OF AUDIO FIXED:  Previously, using manual notch could cause 
loss of receiver audio in CW mode with certain bandwidth settings.



NEW MENU ENTRIES


TX DLY, Unkey to Receive

Sets the delay time in milliseconds from KEY OUT going high (end of external 
amp keying) to return to receive mode. This parameter is intended to compensate 
for amplifier T/R switching on key-up, which can cause audible receive 
artifacts such as "clicks" or "pops." This is especially true when keying in 
the presence of multiple large received signals (e.g., in a pileup). 

Use the smallest value that eliminates audible receive artifacts on key-up. 
Settings from 5-10 are sufficient for most amps. For the KPA1500, a delay value 
of 5 ms is typically used. The best value can be determined experimentally 
while keying the K4 in TEST mode, which keys the K4 and the amplifier without 
producing RF output. This should be done while one or more large signals are 
within +/- 5 kHz of the K4's VFO frequency. (Lacking such signals, artifacts 
are not likely to be heard.)

NOTE:  Settings from 0-15 are applied in such a way as to still allow for QSK 
operation, though settings at the higher end of this range may interact with CW 
timing. Settings from 16-60 will not affect CW timing even at the highest code 
speeds, but they do not allow for full QSK, even when QSK mode is selected. 


TX QSK Method

This parameter has a subtle effect on the way CW QSK sounds. Mode 1 (default) 
is optimized for best overall listening experience, and is recommended for most 
operators. Mode 2 provides full QSK up to somewhat higher code speeds.



===
== R33.BETA1 ==
===

February 16, 2023


NEW FEATURES


- MOUSE WHEEL USE:  When hovering the mouse cursor over the buttons associated 
with the three multi-function knobs,  you can now use the mouse wheel to change 
the parameters.

- NOISE BLANKER ENHANCEMENT:  We've 

[Elecraft] K4 LCD Display

[David Robertson]

My new Elecraft K4 ( Serial NO. 1073 ) has developed a LCD problem.
I think the error is from my setup.
The problem is the LCD display is very slow in updating sense i was playing
around with settings. The display seems to be working but is
updating slowly. I have tried everything I know but cannot get the display
to work at the correct speed.any advice would be appreciated. Thanks and
73, Dave KD1NA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [Elecraft-K4] KPOD intermittent

[Doug Turnbull]

Jim,

 I have two K-Pods which are used with my K4Ds and previously K3s.
I too on occasion have trouble with the switches. I have noted that
rebooting the K4D will often cure the problem.Also I wonder if having
the switch react to both momentary tap and sustained push beyond a second
or two helps.For me the radios would not be the same nor nearly as
ergonomically friendly without the KPods and both of mine go back to the
beginning of the KPod era. I too would be interested in hearing more
but I will keep my KPods.



  73 Doug EI2CN



*From:* elecraft...@groups.io  *On Behalf Of *Jim
Miller - AB3CV
*Sent:* Tuesday 21 March 2023 19:27
*To:* Elecraft@mailman.qth.net; elecraft...@groups.io
*Subject:* [Elecraft-K4] KPOD intermittent



I really like the KPOD...when it works.



I find the buttons occasionally non responsive resulting in nothing being
sent. After a few taps it eventually works again for a while.



Of course this mostly occurs when trying to send a call in a pileup or a
reply 599TU.



Is this a button thing that needs replacing or something in the K4 being
non responsive?



I think it's the KPOD itself since it also happened on my old K3S.



Jim ab3cv

_._,_._,_
--

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#22530) <https://groups.io/g/Elecraft-K4/message/22530>
| Reply To Group

| Reply To Sender

| Mute This Topic <https://groups.io/mt/97762916/1278024> | New Topic
<https://groups.io/g/Elecraft-K4/post>
Your Subscription <https://groups.io/g/Elecraft-K4/editsub/1278024> | Contact
Group Owner  | Unsubscribe
<https://groups.io/g/Elecraft-K4/leave/10999456/1278024/421052491/xyzzy> [
turnb...@net1.ie]

_._,_._,_
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 & KPOD

[hawley, charles j jr]

I've used two KPods connected to the K4 at the same time. The buttons are the 
same of course but the knobs can be VFO A and VFOB which is kind of handy at 
times.

​Chuck Hawley
 c-haw...@illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles


From: Ramon Batista 
Sent: Sunday, March 5, 2023 5:20 PM
To: Fred Jensen 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] K4 & KPOD

Hi Fred, My KPOD is connected to my K4 and K3s, but can use it in one radio
at the time.

On Sun, Mar 5, 2023 at 6:11 PM Fred Jensen  wrote:

> Do I understand the K4 order page correctly that my KPOD currently on my
> K3 will also plug into and work with a K4 ... should I decide to spring
> for one?
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
>
>
> --
> This email has been checked for viruses by AVG antivirus software.
> https://urldefense.com/v3/__http://www.avg.com__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5VpestXYPQ$
> __
> Elecraft mailing list
> Home: 
> https://urldefense.com/v3/__http://mailman.qth.net/mailman/listinfo/elecraft__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5VpoF4hqWA$
> Help: 
> https://urldefense.com/v3/__http://mailman.qth.net/mmfaq.htm__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5VpaLvo6Qw$
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: 
> https://urldefense.com/v3/__http://www.qsl.net__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5VoIkWVHUQ$
> Please help support this email list: 
> https://urldefense.com/v3/__http://www.qsl.net/donate.html__;!!DZ3fjg!59NHZFIm05qi0DhiZ3xbuEtS_uMG6d7ZLaf7Ers_p4nZLJ0h4nxS6rGm57K7xlH06pmkTLndkXP8sGb4MBbCZGfQ5p_-5Vpn5EvZWg$
> Message delivered to wd4x...@gmail.com
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 & KPOD

[Ramon Batista]

Hi Fred, My KPOD is connected to my K4 and K3s, but can use it in one radio
at the time.

On Sun, Mar 5, 2023 at 6:11 PM Fred Jensen  wrote:

> Do I understand the K4 order page correctly that my KPOD currently on my
> K3 will also plug into and work with a K4 ... should I decide to spring
> for one?
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
>
>
> --
> This email has been checked for viruses by AVG antivirus software.
> www.avg.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wd4x...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K4 & KPOD

[Fred Jensen]

Do I understand the K4 order page correctly that my KPOD currently on my 
K3 will also plug into and work with a K4 ... should I decide to spring 
for one?


73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County



--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com