Re: [Elecraft] KXPA100 Question
Jittery PX3 Control comments by Don, K5DW + Brian, K9DTJ + Grant, NQ5T Have noticed that for several years here; at one time I thought it was my age :-) Checked it today ~ it jumps ~ but by turning it slowly, it usually follows OK Cheers, Jan K1ND __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPA100 Question
Should have searched on Nabble first. Finally found some discussion of this PX3 cursor lag issue when running a KXPA100 back in 2017. Elecraft apparently recognized it as a bug, and talked about a fix, but I guess nothing has been forthcoming. Grant NQ5T KX3 (8342)/KXPA100 > On Aug 18, 2019, at 7:07 PM, Brian Hunt wrote: > > Just out of curiosity, is the serial speed set to 38400? Running slower > would make a difference. > > 73, > Brian, K0DTJ > >> On Aug 18, 2019, at 15:41, Grant Youngman wrote: >> >> I fiddled with it a bit, and really didn’t notice any major changes in how >> the PX3 controls function. Not that there aren’t any. >> >> The simple solution is to simply set PA Mode: Off when generally tuning >> around. >> >> Grant NQ5T >> KX3 (8342)/KXPA100 >> >> >>> On Aug 18, 2019, at 5:30 PM, Donald Wines wrote: >>> >>> Grant, >>> >>> Something else I've noticed since getting the KXPA100 is the Select knob on >>> the PX3 gets flaky if it's turned too fast. It seems to work fine if you >>> turn it slowly. For instance when setting the Ref Level if the Select >>> control is turned very fast the display just jitters and doesn't change the >>> level. But when turned at a very slow rate the level changes appropriately. >>> I didn't notice this behavior before I put the KXPA in line. >>> >>> You might try that and let me know what happens. >>> >>> Thanks, >>> Don, K5DW >> >> __ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPA100 Question
Just out of curiosity, is the serial speed set to 38400? Running slower would make a difference. 73, Brian, K0DTJ > On Aug 18, 2019, at 15:41, Grant Youngman wrote: > > I fiddled with it a bit, and really didn’t notice any major changes in how > the PX3 controls function. Not that there aren’t any. > > The simple solution is to simply set PA Mode: Off when generally tuning > around. > > Grant NQ5T > KX3 (8342)/KXPA100 > > >> On Aug 18, 2019, at 5:30 PM, Donald Wines wrote: >> >> Grant, >> >> Something else I've noticed since getting the KXPA100 is the Select knob on >> the PX3 gets flaky if it's turned too fast. It seems to work fine if you >> turn it slowly. For instance when setting the Ref Level if the Select >> control is turned very fast the display just jitters and doesn't change the >> level. But when turned at a very slow rate the level changes appropriately. >> I didn't notice this behavior before I put the KXPA in line. >> >> You might try that and let me know what happens. >> >> Thanks, >> Don, K5DW > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to huntin...@coastside.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPA100 Question
I fiddled with it a bit, and really didn’t notice any major changes in how the PX3 controls function. Not that there aren’t any. The simple solution is to simply set PA Mode: Off when generally tuning around. Grant NQ5T KX3 (8342)/KXPA100 > On Aug 18, 2019, at 5:30 PM, Donald Wines wrote: > > Grant, > > Something else I've noticed since getting the KXPA100 is the Select knob on > the PX3 gets flaky if it's turned too fast. It seems to work fine if you turn > it slowly. For instance when setting the Ref Level if the Select control is > turned very fast the display just jitters and doesn't change the level. But > when turned at a very slow rate the level changes appropriately. I didn't > notice this behavior before I put the KXPA in line. > > You might try that and let me know what happens. > > Thanks, > Don, K5DW > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPA100 Question
Grant, Something else I've noticed since getting the KXPA100 is the Select knob on the PX3 gets flaky if it's turned too fast. It seems to work fine if you turn it slowly. For instance when setting the Ref Level if the Select control is turned very fast the display just jitters and doesn't change the level. But when turned at a very slow rate the level changes appropriately. I didn't notice this behavior before I put the KXPA in line. You might try that and let me know what happens. Thanks, Don, K5DW On Sun, Aug 18, 2019 at 2:41 PM Grant Youngman wrote: > Don … > > Thanks. That answers my question. You’re right, it’s close enough if > you’re tuning slowly, but if you try to tune quickly the PX3 cursor doesn’t > follow so well. > > Grant NQ5T > KX3 (8342)/KXPA100 > > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPA100 Question
Don … Thanks. That answers my question. You’re right, it’s close enough if you’re tuning slowly, but if you try to tune quickly the PX3 cursor doesn’t follow so well. Grant NQ5T KX3 (8342)/KXPA100 > On Aug 18, 2019, at 4:30 PM, Donald Wines wrote: > > Grant, > > Don’t know if it’s normal behavior but my setup is exactly like yours and the > behavior is the same. Especially noticeable at a high tuning rate. I bought > the KXPA100 from an individual but it had never been used, essentially new. > > Don, K5DW > > Sent from my iPad > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPA100 Question
Grant, Don’t know if it’s normal behavior but my setup is exactly like yours and the behavior is the same. Especially noticeable at a high tuning rate. I bought the KXPA100 from an individual but it had never been used, essentially new. Don, K5DW Sent from my iPad > On Aug 18, 2019, at 1:16 PM, Grant Youngman wrote: > > Just got a shiny new KXPA100. > > I’m using “tight” integration with my KX3. The one downside I’ve observed is > that when PA Mode is On, the cursor display on the PX3 gets jerky and doesn’t > follow well. It isn’t terrible, just jerky. I assume this is the result of > the KXPA adding data load through the PX3. > > Can anyone confirm for me if this is normal behavior, or if I should be > looking elsewhere? > > Thanks .. > > Grant NQ5T > KX3 (8342)/KXPA100 > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k5dw...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KXPA100 Question
Just got a shiny new KXPA100. I’m using “tight” integration with my KX3. The one downside I’ve observed is that when PA Mode is On, the cursor display on the PX3 gets jerky and doesn’t follow well. It isn’t terrible, just jerky. I assume this is the result of the KXPA adding data load through the PX3. Can anyone confirm for me if this is normal behavior, or if I should be looking elsewhere? Thanks .. Grant NQ5T KX3 (8342)/KXPA100 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Kxpa100 question...
The KXAT100 adds its own front panel. It should be included with the kit. If you buy both at once, you only get the one front panel. If you download the KXPA100 assembly manual, that information is covered. 73, Don W3FPR On 9/28/2017 8:26 AM, Taldo wrote: Hey there, I have seen two kinds of elecraft kxpa100 amp front panels. One is without led swr meter and the other has it. The one that I sow without the swr meter didn't have the internal ATU so thought that if you upgrade it with the kit, you might get a new front panel in the kit but I couldn't get any clue for it anywhere... I couldn't find any explanation for that difference nor I could see it in the elecraft website. Can anyone give an explanation? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Kxpa100 question...
Yes, the internal ATU comes with a new front panel containing the ATU controls and indicators. You can read the Elecraft KXPA100/KXAT100 assembly manuals on the Elecraft website, which explains the differences > On Sep 28, 2017, at 8:26 AM, Taldo wrote: > > Hey there, I have seen two kinds of elecraft kxpa100 amp front panels. One > is without led swr meter and the other has it. The one that I sow without > the swr meter didn't have the internal ATU so thought that if you upgrade > it with the kit, you might get a new front panel in the kit but I couldn't > get any clue for it anywhere... I couldn't find any explanation for that > difference nor I could see it in the elecraft website. Can anyone give an > explanation? Grant NQ5T K3 #2091, KX3 #8342 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Kxpa100 question...
Hey there, I have seen two kinds of elecraft kxpa100 amp front panels. One is without led swr meter and the other has it. The one that I sow without the swr meter didn't have the internal ATU so thought that if you upgrade it with the kit, you might get a new front panel in the kit but I couldn't get any clue for it anywhere... I couldn't find any explanation for that difference nor I could see it in the elecraft website. Can anyone give an explanation? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com