Re: [Elecraft] K2 accessories order
Ed, That is a Field Test K2 serial number. I recommend that you upgrade it with the K2ATOBKT and *all* the other upgrade kits that are listed in the K2 A to B instructions. Do that before considering adding any options. I would also recommend that you upgrade the IF crystals to the newer crystal set. If you have an old KSB2, take a look at the crystals that came with it, and if they are not marked with an -S suffix, order the set of 14 matched crystals so you have 7 to use in the base K2 and the other 7 to use in the KSB2. If your KSB2 has the current level crystals, you only need a set of 7 for the base K2. If you want to change the KSB2 filter bandwidth to the newer 2.4kHz width, add the SSBCAPKT when you build the KSB2. Back to the base K2 upgrades, do the Alternate AF Gain Wiring Mod, and if your K2 has been used for a significant time, replace the AF Gain control. Once you have added the A to B upgrades, you can start on the options. 73, Don W3FPR On 8/2/2015 7:07 PM, Edward T. Tanton wrote: I have K2 SN 00057. It is the most basic it can be. I stopped once it was working even though I had lots of the original add-ons because I was simply having too much fun. So, here is my dilemma: I have ALL of the options except the KPA100, including updates DSP, but have not yet installed any of them. I hope to even get the KPA100 for a combined late October birthday/Christmas. Does anyone have a list of a) what order I SHOULD install them in; b) which ones should NOT be used with any others? (I understand the battery and I THINK the internal antenna tuner are not usable with the KPA100.) Thanks. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 accessories order
Ed, To further address your original question -- If you add the KPA100 to the base K2, then those options that are mounted in the K2 top cover are not compatible with the KPA100. That is the KAT2, KIO2 and the KBT2. If you wish to configure it as a complete K2/10 with a KPA100, consider mounting the KPA100 in an EC2 enclosure. That is easiest done if you add the KAT100-2 along with the EC2 enclosure. The KPA100 plugs right into the KAT100-2 board. That does require that you have the KIO2 in the base K2. 73, Don W3FPR On 8/2/2015 7:07 PM, Edward T. Tanton wrote: I have K2 SN 00057. It is the most basic it can be. I stopped once it was working even though I had lots of the original add-ons because I was simply having too much fun. So, here is my dilemma: I have ALL of the options except the KPA100, including updates DSP, but have not yet installed any of them. I hope to even get the KPA100 for a combined late October birthday/Christmas. Does anyone have a list of a) what order I SHOULD install them in; b) which ones should NOT be used with any others? (I understand the battery and I THINK the internal antenna tuner are not usable with the KPA100.) Thanks. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
RE: [Elecraft] K2 on order
You will love that radio!! I got mine in October. Worked on it weekends only. Completed the K2, 160m kit, SSB kit, and 99% of the 100W kit in 6 days. And it worked the first time!!! It is by far my favorite radio. You will have fun 73's KG6SKA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of DW Holtman Sent: Monday, February 11, 2008 5:31 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K2 on order Hello, This morning, I ordered a K2. I figured it would take a few days to process the order, pack the box etc. I received an E-Mail a while ago, it has already been shipped. It should be here Wednesday. The UPS delivery date is not yet available, but normally from California to Utah is normally two days. The next week or so, will be fun. I love building stuff!! Best, DW Holtman WB7SSN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 on order!
Jim, Congrats on taking on the K2! I'm just a couple of weeks ahead of you, feverishly working on s/n 5853, the low power version. Regarding the power supply-- I'm starting out with a Pyramid PS-4KX (13.8 V. 3A continous, 4A surge) that I have on hand. Since I also purchased the KBT2 internal battery option, I may look for a small Astron supply with an adjustable voltage. I understand the internal battery requires at least 14V at the K2 power plug input for proper charging. 73 happy building! Chuck NI0C ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K2 on order!
Chuck and all, With the internal battery, there is an alternative to powering the K2 with a 14.1 volt supply - make provisions to attach a 3 state charger directly to the battery terminals. To see how that can be accomplished safely, check out my website http://w3fpr.qrpradio.com 73, Don W3FPR -Original Message- Regarding the power supply-- I'm starting out with a Pyramid PS-4KX (13.8 V. 3A continous, 4A surge) that I have on hand. Since I also purchased the KBT2 internal battery option, I may look for a small Astron supply with an adjustable voltage. I understand the internal battery requires at least 14V at the K2 power plug input for proper charging. 73 happy building! Chuck NI0C ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 on order!
If you're happy with your Astron, why not buy one of the smaller ... say 7A or 10A ... Astrons? They also make some nice low-profile cabinet units. 73! Ken Kopp - K0PP [EMAIL PROTECTED] or [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K2 on order!
In addition to the smaller Astrons, Ten Tec makes a small 11-amp supply: the model 937. It's about the same footprint as the K2 but about half as high as a K2. Remember, you're looking at ICAS or intermittent duty ratings, not continuous duty, unless you are planning to put a 15 watt unkeyed carrier on the air and leave it there permanently (or until FCC and your fellow Hams storm your front door). WARNING, WARNING, WARNING Will Robinson! (Remember Lost in Space or have I dated myself yet again?) Do NOT put your K2 on top of or next to a power supply, especially a linear power supply. The magnetic field around the power transformer will invoke various gremlins in the K2. The K2 has been hardened against most of these gremlins, but it's not absolutely problem-proof. The magnetic field from the power transformer flopping about at 60 Hz gets into the toroids and can cause various things from frequency warble on the signal to hum on the carrier. Recommend keeping a small supply at least 6 to 12 inches away from your K2. After discovering that my supply went on a stool under the operating desk, freeing up space on the desk and keeping it a couple of feet from the rig. Ron AC7AC -Original Message- Santa is loading up his sleigh with a K2! Any recommendations on a 5A power supply that won't dwarf this and behave electrically? I've got a 20A Astron that powers my current rig that I'd like to move to the lab. 73 jim ab3cv ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K2 on order! - Power Supply
Hi Jim ... Congratulations on the K2 order - you will love it. Any recommendations on a 5A power supply that won't dwarf this and behave electrically? I'm using a Gamma. It is a VERY small power supply - only 3.5 by 1.5 by 5 and weighs a little over a pound. It seems to be a high quality unit with an innovative design - A low powered supply supplemented by an internal Super Cap for peak loads. As far as I can tell, it is absolutely quiet EMI wise. Mine is 6 inches away from my K2 and no electrical noise. It is actually overkill for a base K2, but in spite of its diminutive size will actually power a 100W SSB rig or about 80 W CW in their normal duty cycles. Should be a very flexible unit for travel, etc., especially if you ever upgrade to the 100W amp. Have had mine for 5 months now and really like it. Have had lots of round the clock use from it during Sweepstakes, CQ WW DX contest, etc. Check it out at: www.gammaresearch.net and also see the EHam reviews. I have no connection with the company. Enjoy the build process ;) 73 ... Craig ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com