Re: [expert] Problem with LM82 and modem
Thanks to all. I have solved the problem. Using minicom, I must write AT and press he enter key twice to get a OK. I don't know the reason, but I have created a chatfile under /etc/ppp/ like this: ABORT 'NO CARRIER' ABORT 'NO DIALTONE' ABORT 'ERROR' ABORT 'NO ANSWER' ABORT 'BUSY' ATZ OK ATDTx CONNEC In the options I have put the line: connect /usr/sbin/chat -vf /etc/ppp/chatfile Also, I have changed the speed from 115200 to 57600 and now the modem is working ok. I can't use kppp but I use modemlights_applet to call pppd, and now my friend is enjoying linux + internet. Thanks. óscar. El sáb, 06-04-2002 a las 00:46, Oscar escribió: El vie, 05-04-2002 a las 01:30, Olly P escribió: On Thursday 04 April 2002 15:42, óscar typed: Thank you for your answer. But I'm afraid that this is not the problem. In fact, the modem is *not* dialing. I believe that the problem is in the modem initialisation. If I activate the log viewer in kppp I can observe that it does not show the ATZ - OK which I used to see. Instead, the inferior displacement bar shows like the first line of log has filled of a series of invisible characters. If I run a terminal with the modem, I must write two times AT intro to get a OK. And ATI 1 show a long line, with the correct string at the end of a series of invisible characters. Any idea? Thanks, oscar. Thursday 04 April 2002 WhoopsSorry about that Oscar, lots of times I am wrong grin what happens if you replace the ATZ in the init string with ATF ? that should reflush and go with a good string?Maybe?well you may have a idea already about the validity of my advice G but give it a try ...? Thank you, Olly, I will try it tomorrow, and I will tell you about it. I will try CR/LF instead of CR, changing the flow control and the speed. Thanks again, and you will have news soon (good news, I hope...) oscar. -- .-. oo| /`'\ Usuario de Linux Registrado #227443 (\_;/) http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- .-. oo| /`'\ Usuario de Linux Registrado #227443 (\_;/) http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Problem with LM82 and modem
El vie, 05-04-2002 a las 01:30, Olly P escribió: On Thursday 04 April 2002 15:42, óscar typed: Thank you for your answer. But I'm afraid that this is not the problem. In fact, the modem is *not* dialing. I believe that the problem is in the modem initialisation. If I activate the log viewer in kppp I can observe that it does not show the ATZ - OK which I used to see. Instead, the inferior displacement bar shows like the first line of log has filled of a series of invisible characters. If I run a terminal with the modem, I must write two times AT intro to get a OK. And ATI 1 show a long line, with the correct string at the end of a series of invisible characters. Any idea? Thanks, oscar. Thursday 04 April 2002 WhoopsSorry about that Oscar, lots of times I am wrong grin what happens if you replace the ATZ in the init string with ATF ? that should reflush and go with a good string?Maybe?well you may have a idea already about the validity of my advice G but give it a try ...? Thank you, Olly, I will try it tomorrow, and I will tell you about it. I will try CR/LF instead of CR, changing the flow control and the speed. Thanks again, and you will have news soon (good news, I hope...) oscar. -- .-. oo| /`'\ Usuario de Linux Registrado #227443 (\_;/) http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Problem with LM82 and modem
On Thursday 04 April 2002 13:44, óscar. typed: Hi all, I have LM8.2 installed in several PCs and is working ok. But this afternoon I have installed it in a friend's computer. He cannot connect to internet (using kppp) The modem is a Conceptronic 56ET This is what I get if I run pppd from a console: [root@localhost ppp]# pppd ~ÿ}#À!}!}!} }4}}} } } } }%}vÊ}'}}(}}*y~~ÿ}#À!}!}!} }4}}} } } clip...this is working fine And these messages are in /var/log/messages: Apr 4 18:51:31 localhost pppd[2876]: pppd 2.4.1 started by root, uid 0 Apr 4 18:51:31 localhost pppd[2876]: Using interface ppp0 Apr 4 18:51:32 localhost pppd[2876]: Connect: ppp0 -- /dev/pts/2 Apr 4 18:51:33 localhost /etc/hotplug/net.agent: assuming ppp0 is already up Apr 4 18:52:02 localhost pppd[2876]: LCP: timeout sending Config-Requests Apr 4 18:52:02 localhost pppd[2876]: Connection terminated. Apr 4 18:52:02 localhost pppd[2876]: Receive serial link is not 8-bit clean: Apr 4 18:52:02 localhost pppd[2876]: Problem: all had bit 7 set to 0 Apr 4 18:52:02 localhost pppd[2876]: Exit. - Thursday 04 April 2002 -- 12:01hrs cst I had this same problem last year óscar ..the PPPD and the modem is working...the trouble is with authenication with the ISP...look to etc/ppp/options /etc/ppp/chap-secrets or pap if you use that The modem is timing out while waiting for the authentication to get it's act together. luck with it. Olly P. Biloxi Mississippi Linux MDK 8.0 2.4.3-20 mdk-Kmail 2.1.120G IBM Deskstar ATX Plll 600mhz Asus CUBX ...384m Crucial PC133ram -- Thu Apr 4 12:10:51 EST 2002 The Heineken Uncertainty Principle: You can never be sure how many beers you had last night. 12:10pm up 2:11, 2 users, load average: 0.00, 0.03, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Problem with LM82 and modem
- Mensaje Original - Remitente: Olly P [EMAIL PROTECTED] Fecha: Jueves, Abril 4, 2002 7:15 pm Asunto: Re: [expert] Problem with LM82 and modem On Thursday 04 April 2002 13:44, óscar. typed: Hi all, I have LM8.2 installed in several PCs and is working ok. But this afternoon I have installed it in a friend's computer. He cannot connect to internet (using kppp) The modem is a Conceptronic 56ET This is what I get if I run pppd from a console: [root@localhost ppp]# pppd ~ÿ}#À!}!}!} }4}}} } } } }%}vÊ}'}}(}}*y~~ÿ}#À!}!}!} }4}}} } } clip...this is working fine And these messages are in /var/log/messages: Apr 4 18:51:31 localhost pppd[2876]: pppd 2.4.1 started by root, uid 0 Apr 4 18:51:31 localhost pppd[2876]: Using interface ppp0 Apr 4 18:51:32 localhost pppd[2876]: Connect: ppp0 -- /dev/pts/2 Apr 4 18:51:33 localhost /etc/hotplug/net.agent: assuming ppp0 is already up Apr 4 18:52:02 localhost pppd[2876]: LCP: timeout sending Config-Requests Apr 4 18:52:02 localhost pppd[2876]: Connection terminated. Apr 4 18:52:02 localhost pppd[2876]: Receive serial link is not 8-bit clean: Apr 4 18:52:02 localhost pppd[2876]: Problem: all had bit 7 set to 0 Apr 4 18:52:02 localhost pppd[2876]: Exit. - Thursday 04 April 2002 -- 12:01hrs cst I had this same problem last year óscar ..the PPPD and the modem is working...the trouble is with authenication with the ISP...look to etc/ppp/options /etc/ppp/chap-secrets or pap if you use that The modem is timing out while waiting for the authentication to get it's act together. luck with it. Thank you for your answer. But I'm afraid that this is not the problem. In fact, the modem is *not* dialing. I believe that the problem is in the modem initialisation. If I activate the log viewer in kppp I can observe that it does not show the ATZ - OK which I used to see. Instead, the inferior displacement bar shows like the first line of log has filled of a series of invisible characters. If I run a terminal with the modem, I must write two times AT intro to get a OK. And ATI 1 show a long line, with the correct string at the end of a series of invisible characters. Any idea? Thanks, oscar. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Problem with LM82 and modem
On Thursday 04 April 2002 15:42, óscar typed: Thank you for your answer. But I'm afraid that this is not the problem. In fact, the modem is *not* dialing. I believe that the problem is in the modem initialisation. If I activate the log viewer in kppp I can observe that it does not show the ATZ - OK which I used to see. Instead, the inferior displacement bar shows like the first line of log has filled of a series of invisible characters. If I run a terminal with the modem, I must write two times AT intro to get a OK. And ATI 1 show a long line, with the correct string at the end of a series of invisible characters. Any idea? Thanks, oscar. Thursday 04 April 2002 WhoopsSorry about that Oscar, lots of times I am wrong grin what happens if you replace the ATZ in the init string with ATF ? that should reflush and go with a good string?Maybe?well you may have a idea already about the validity of my advice G but give it a try ...? Olly P. Biloxi Mississippi Linux MDK 8.0 2.4.3-20 mdk-Kmail 2.1.120G IBM Deskstar ATX Plll 600mhz Asus CUBX ...384m Crucial PC133ram -- Thu Apr 4 18:27:26 EST 2002 Knowledge is power -- knowledge shared is power lost. -- Aleister Crowley 6:27pm up 8:28, 2 users, load average: 0.00, 0.02, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
