RE: Ethernet port
What do you see when you run 'ifconfig -a'? Here's the response from one of my D-style boxes: 21AW01-dmdo ifconfig -a lo0: flags=849UP,LOOPBACK,RUNNING,MULTICAST mtu 8232 inet 127.0.0.1 netmask ff00 hme0: flags=863UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST mtu 1500 inet 151.128.21.65 netmask broadcast 151.128.255.255 hme1: flags=863UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST mtu 1500 inet 151.163.74.51 netmask f800 broadcast 151.163.79.255 Hope this helps. Duc -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 9:38 AM To: [EMAIL PROTECTED] Subject: Ethernet port Hi everyone, I have a problem on the second ethernet port of an AW51, coneccted to the corporate network. Suddenly it ceased to recognize the network as if we diconeccted the cable (if you try a ping from the network it would not answer). No need to say that we already checked that we have network signal at that port. Is there any way to force the AW to rescan/reset this port without rebooting it? Thank you all in advance. Martín Ugarte CAS - Refinería La Plata Repsol-YPF - Argentina _ This message has been checked for all known viruses by the MessageLabs Virus Scanning Service. For further information visit http://www.messagelabs.com/stats.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
RE: Ethernet port
The ifconfig command can be used to reconfigure the port. There is an update to the Ethernet driver to fix a number of defects. You need to contact the Customer Satisfaction Center and ask about a QF for the Ethernet Driver on 50 Series AWs. I don't remember the QF number. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 8:38 AM To: [EMAIL PROTECTED] Subject:Ethernet port Hi everyone, I have a problem on the second ethernet port of an AW51, coneccted to the corporate network. Suddenly it ceased to recognize the network as if we diconeccted the cable (if you try a ping from the network it would not answer). No need to say that we already checked that we have network signal at that port. Is there any way to force the AW to rescan/reset this port without rebooting it? Thank you all in advance. Martín Ugarte CAS - Refinería La Plata Repsol-YPF - Argentina --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
RE: Ethernet port
Martin, I suggest that you read the manual page for ifconfig. You can completely reconfigure a network interface in Solaris without rebooting. h Harry Forbes Invensys Process Systems Marketing +1 508.549.6389 office +1 617.335.1474 mobile [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 9:38 AM To: [EMAIL PROTECTED] Subject: Ethernet port Hi everyone, I have a problem on the second ethernet port of an AW51, coneccted to the corporate network. Suddenly it ceased to recognize the network as if we diconeccted the cable (if you try a ping from the network it would not answer). No need to say that we already checked that we have network signal at that port. Is there any way to force the AW to rescan/reset this port without rebooting it? Thank you all in advance. Martín Ugarte CAS - Refinería La Plata Repsol-YPF - Argentina --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
Re: Ethernet port
You can bring an interface down and up with the following commands: ifconfig hme1 down ifconfig hme1 up Wim Verberckt Bayer Antwerpen Belgium [EMAIL PROTECTED] Sent by: To: [EMAIL PROTECTED] [EMAIL PROTECTED]cc: oject.org Subject: Ethernet port 27-08-2001 16:08 Please respond to Foxboro DCS Mail List Hi everyone, I have a problem on the second ethernet port of an AW51, coneccted to the corporate network. Suddenly it ceased to recognize the network as if we diconeccted the cable (if you try a ping from the network it would not answer). No need to say that we already checked that we have network signal at that port. Is there any way to force the AW to rescan/reset this port without rebooting it? Thank you all in advance. Martín Ugarte CAS - Refinería La Plata Repsol-YPF - Argentina --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
RE: Ethernet port
Title: RE: Ethernet port The Quick Fix to improve hme driver functionality is QF992053B. It is recommended for use when connecting to a corporate utilizing switches. -Original Message- From: Johnson, Alex (Foxboro) [mailto:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 8:56 AM To: Foxboro DCS Mail List Subject: RE: Ethernet port The ifconfig command can be used to reconfigure the port. There is an update to the Ethernet driver to fix a number of defects. You need to contact the Customer Satisfaction Center and ask about a QF for the Ethernet Driver on 50 Series AWs. I don't remember the QF number. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 8:38 AM To: [EMAIL PROTECTED] Subject: Ethernet port Hi everyone, I have a problem on the second ethernet port of an AW51, coneccted to the corporate network. Suddenly it ceased to recognize the network as if we diconeccted the cable (if you try a ping from the network it would not answer). No need to say that we already checked that we have network signal at that port. Is there any way to force the AW to rescan/reset this port without rebooting it? Thank you all in advance. Martín Ugarte CAS - Refinería La Plata Repsol-YPF - Argentina --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
RE: Ethernet port
I'm pretty sure that it has been revised to 'C'. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: John Metsker [SMTP:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 9:05 AM To: 'Foxboro DCS Mail List' Subject:RE: Ethernet port The Quick Fix to improve hme driver functionality is QF992053B. It is recommended for use when connecting to a corporate utilizing switches. -Original Message- From: Johnson, Alex (Foxboro) [ mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] ] Sent: Monday, August 27, 2001 8:56 AM To: Foxboro DCS Mail List Subject: RE: Ethernet port The ifconfig command can be used to reconfigure the port. There is an update to the Ethernet driver to fix a number of defects. You need to contact the Customer Satisfaction Center and ask about a QF for the Ethernet Driver on 50 Series AWs. I don't remember the QF number. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 8:38 AM To: [EMAIL PROTECTED] Subject:Ethernet port Hi everyone, I have a problem on the second ethernet port of an AW51, coneccted to the corporate network. Suddenly it ceased to recognize the network as if we diconeccted the cable (if you try a ping from the network it would not answer). No need to say that we already checked that we have network signal at that port. Is there any way to force the AW to rescan/reset this port without rebooting it? Thank you all in advance. Martín Ugarte CAS - Refinería La Plata Repsol-YPF - Argentina --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
RE: Ethernet port
Here is the complete information: There are 2 QFs. One for the le driver and 1 for the hme driver. The le QF is appiled to 51A, 51B and 51C type stations. The hme QF is applied to 51D and 51E type stations. So, the table is: Device Station Types QF le 51a/b/c QF990944C hme 51d/e QF992053B I would make sure that anyone who is connected to a corporate network install the correct QF for their machine. Check with your FS personnel for more information. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: Johnson, Alex (Foxboro) [SMTP:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 9:20 AM To: Foxboro DCS Mail List Subject:RE: Ethernet port I'm pretty sure that it has been revised to 'C'. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: John Metsker [SMTP:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 9:05 AM To: 'Foxboro DCS Mail List' Subject:RE: Ethernet port The Quick Fix to improve hme driver functionality is QF992053B. It is recommended for use when connecting to a corporate utilizing switches. -Original Message- From: Johnson, Alex (Foxboro) [ mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] ] Sent: Monday, August 27, 2001 8:56 AM To: Foxboro DCS Mail List Subject: RE: Ethernet port The ifconfig command can be used to reconfigure the port. There is an update to the Ethernet driver to fix a number of defects. You need to contact the Customer Satisfaction Center and ask about a QF for the Ethernet Driver on 50 Series AWs. I don't remember the QF number. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Monday, August 27, 2001 8:38 AM To: [EMAIL PROTECTED] Subject:Ethernet port Hi everyone, I have a problem on the second ethernet port of an AW51, coneccted to the corporate network. Suddenly it ceased to recognize the network as if we diconeccted the cable (if you try a ping from the network it would not answer). No need to say that we already checked that we have network signal at that port. Is there any way to force the AW to rescan/reset this port without rebooting it? Thank you all in advance. Martín Ugarte CAS - Refinería La Plata Repsol-YPF - Argentina --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list
