RE: Publishing a Frame book on the Amazon Kindle

[RJ Jacquez]

Hi Tina, earlier this week during STC in Atlanta, Tom Aldous from 
www.intech.com was showing me how he was able to convert a FrameMaker book into 
XHTML files using RoboHelp 8, and then through a script was able to package it 
for the Kindle, and it looked really good on the device.

I'm not sure if Tom is on this list, but in case he isn't, I'm including him in 
this email, so that he may either provide more info to this list, or please 
feel free to contact him directly.

Sincerely,

RJ Jácquez
Senior Product Evangelist
Adobe Technical Communication Suite 
Adobe eLearning Solutions
http://blogs.adobe.com/rjacquez 
Twitter: @rjacquez


-Original Message-
From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Tina Ricks
Sent: Friday, May 08, 2009 11:07 AM
To: framers@lists.frameusers.com
Subject: Publishing a Frame book on the Amazon Kindle

Does anyone have experience with publishing a print book created in Frame
for the Amazon Kindle? From what I've managed to figure out from the web,
the output is HTML, and there are a lot of dos and don'ts available from
Amazon. None of these, of course, refer to specific software that a book
might be created in. It seems as if most of the traditional publishing world
(big publishers like Random House, Harper, and so on) use InDesign, not
FrameMaker.

 

If anyone has tips or a useful site, please point me in that direction.
Thanks.

 

Tina Ricks | Editor | Trial Guides

www.trialguides.com

t...@trialguides.com

___


You are currently subscribed to Framers as rjacq...@adobe.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/rjacquez%40adobe.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Publishing a Frame book on the Amazon Kindle

[RJ Jacquez]

Hi Tina, earlier this week during STC in Atlanta, Tom Aldous from 
www.intech.com was showing me how he was able to convert a FrameMaker book into 
XHTML files using RoboHelp 8, and then through a script was able to package it 
for the Kindle, and it looked really good on the device.

I'm not sure if Tom is on this list, but in case he isn't, I'm including him in 
this email, so that he may either provide more info to this list, or please 
feel free to contact him directly.

Sincerely,

RJ J?cquez
Senior Product Evangelist
Adobe Technical Communication Suite 
Adobe eLearning Solutions
http://blogs.adobe.com/rjacquez 
Twitter: @rjacquez


-Original Message-
From: framers-bounces at lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Tina Ricks
Sent: Friday, May 08, 2009 11:07 AM
To: framers at lists.frameusers.com
Subject: Publishing a Frame book on the Amazon Kindle

Does anyone have experience with publishing a print book created in Frame
for the Amazon Kindle? From what I've managed to figure out from the web,
the output is HTML, and there are a lot of dos and don'ts available from
Amazon. None of these, of course, refer to specific software that a book
might be created in. It seems as if most of the traditional publishing world
(big publishers like Random House, Harper, and so on) use InDesign, not
FrameMaker.



If anyone has tips or a useful site, please point me in that direction.
Thanks.



Tina Ricks | Editor | Trial Guides

www.trialguides.com

tina at trialguides.com

___


You are currently subscribed to Framers as rjacquez at adobe.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscribe at lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/rjacquez%40adobe.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Publishing a Frame book on the Amazon Kindle

[Stuart Rogers]

Art Campbell wrote:

> I'd expect an HTML book from Frame using either native filters,
> MIF3Go, 

Must be the latest upgrade!  (I haven't purchased the program, though, 
so in my case, it's MIF4Go ;-)

TGIF,

-- 
Stuart Rogers
Technical Communicator
Phoenix Geophysics Limited
Toronto, ON, Canada
+1 (416) 491-7340 x 325

srogers phoenix-geophysics com

"Ah, but a man's screech should exceed his rasp, or what's a violin for?"

--with apologies to Robert Browning and the people next door

Publishing a Frame book on the Amazon Kindle

[Art Campbell]

I may not be fully understanding the question, but because the
deliverable format is HTML or HTML-based
(http://www.amazon.com/gp/help/customer/display.html?nodeId=200140600),
 why would it matter what the authoring platform was, so long as it
output clean HTML (or one of the other formats)? The whole idea behind
HTML and format-independent structured formats is to remove the
authoring platform as a factor from the end product.

I'd expect an HTML book from Frame using either native filters,
MIF3Go, or another third-party filter to work as well as any other
product from any other source tool. I've never had a problem
integrating Frame-sourced HTML into a web page...

Art

Art Campbell
   art.campbell at gmail.com
  "... In my opinion, there's nothing in this world beats a '52
Vincent and a redheaded girl." -- Richard Thompson
  No disclaimers apply.
   DoD 358



On Fri, May 8, 2009 at 2:06 PM, Tina Ricks  
wrote:
> Does anyone have experience with publishing a print book created in Frame
> for the Amazon Kindle? From what I've managed to figure out from the web,
> the output is HTML, and there are a lot of dos and don'ts available from
> Amazon. None of these, of course, refer to specific software that a book
> might be created in. It seems as if most of the traditional publishing world
> (big publishers like Random House, Harper, and so on) use InDesign, not
> FrameMaker.
>
>
>
> If anyone has tips or a useful site, please point me in that direction.
> Thanks.
>
>
>
> Tina Ricks | Editor | Trial Guides
>
> www.trialguides.com
>
> tina at trialguides.com
>
> ___
>
>
> You are currently subscribed to Framers as art.campbell at gmail.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>

RE: Shades of grey in Frame

[Owen, Clint]

Lea,

Do you have a PDF copy of the original version, in which the graphics
look OK? If so, then you can use PDF as your graphic format and probably
retain the original quality. Just extract each page with a graphic on it
and crop as necessary to get the correct size.

We have to do this with old manuals when the original graphics are lost.

Clint 


Clinton Owen | Senior Technical Writer | Crane Aerospace & Electronics |
Telephone: +1 425-743-8674 | Fax: +1 425-743-8113


-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Lea Rush
Sent: Friday, May 08, 2009 12:15 PM
To: framers@lists.frameusers.com
Subject: Shades of grey in Frame

Hi,

 

I started with FM7, creating a user's manual for our equipment. I
dutifully imported the graphics by reference, using JPEG images (I
didn't know any better back then). Still, the output fit my needs, and
it worked fine.

 

Now I've upgraded to FM8, and those same graphics have 'aged' in a very
strange way. The printed output now has a grey patina overlaying the
imported graphic. I hesitate to try PNG because the truly ancient
software I used then doesn't list it as an option, and I'd have to
export as BMP, convert to PNG and go from there. Does anyone have any
matching experience?
Is there a fix other than recreating the graphics in a more
Frame-friendly format?

 

Frame 8.0p277

Graphics type: B&W line drawings

Original graphics software: Flow Charts & More! (We were a very small
company then.)

Vista SP1

 

Thanks in advance,

Lea


_ 

Lea Rush
Software and Documentation Specialist
Astoria-Pacific International
PO Box 830 Clackamas OR 97015
PH: 800-657-3010
FAX:  503-655-7367 

 

___


You are currently subscribed to Framers as
clint.o...@craneaerospace.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/clint.owen%40craneae
rospace.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

We value your opinion!  How may we serve you better? 
Please click the survey link to tell us how we are doing:
http://www.craneae.com/surveys/satisfaction.htm
Your feedback is of the utmost importance to us. Thank you for your time.

Crane Aerospace & Electronics Confidentiality Statement:
The information contained in this email message may be privileged and is 
confidential information intended only for the use of the recipient, or any 
employee or agent responsible to deliver it to the intended recipient. Any 
unauthorized use, distribution or copying of this information is strictly 
prohibited 
and may be unlawful. If you have received this communication in error, please 
notify 
the sender immediately and destroy the original message and all attachments 
from 
your electronic files.

___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Shades of grey in Frame

[Owen, Clint]

Lea,

Do you have a PDF copy of the original version, in which the graphics
look OK? If so, then you can use PDF as your graphic format and probably
retain the original quality. Just extract each page with a graphic on it
and crop as necessary to get the correct size.

We have to do this with old manuals when the original graphics are lost.

Clint 


Clinton Owen | Senior Technical Writer | Crane Aerospace & Electronics |
Telephone: +1 425-743-8674 | Fax: +1 425-743-8113


-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Lea Rush
Sent: Friday, May 08, 2009 12:15 PM
To: framers at lists.frameusers.com
Subject: Shades of grey in Frame

Hi,



I started with FM7, creating a user's manual for our equipment. I
dutifully imported the graphics by reference, using JPEG images (I
didn't know any better back then). Still, the output fit my needs, and
it worked fine.



Now I've upgraded to FM8, and those same graphics have 'aged' in a very
strange way. The printed output now has a grey patina overlaying the
imported graphic. I hesitate to try PNG because the truly ancient
software I used then doesn't list it as an option, and I'd have to
export as BMP, convert to PNG and go from there. Does anyone have any
matching experience?
Is there a fix other than recreating the graphics in a more
Frame-friendly format?



Frame 8.0p277

Graphics type: B&W line drawings

Original graphics software: Flow Charts & More! (We were a very small
company then.)

Vista SP1



Thanks in advance,

Lea


_ 

Lea Rush
Software and Documentation Specialist
Astoria-Pacific International
PO Box 830 Clackamas OR 97015
PH: 800-657-3010
FAX:  503-655-7367 



___


You are currently subscribed to Framers as
Clint.Owen at craneaerospace.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/clint.owen%40craneae
rospace.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

We value your opinion!  How may we serve you better? 
Please click the survey link to tell us how we are doing:
http://www.craneae.com/surveys/satisfaction.htm
Your feedback is of the utmost importance to us. Thank you for your time.

Crane Aerospace & Electronics Confidentiality Statement:
The information contained in this email message may be privileged and is 
confidential information intended only for the use of the recipient, or any 
employee or agent responsible to deliver it to the intended recipient. Any 
unauthorized use, distribution or copying of this information is strictly 
prohibited 
and may be unlawful. If you have received this communication in error, please 
notify 
the sender immediately and destroy the original message and all attachments 
from 
your electronic files.

Conference: Technical Communication UK, 2009

[Martin Ley]

Hi folks,

As a Fellow of the ISTC in the UK, I have been asked to help out with  
promoting our conference this year (Technical Communication UK). Apart  
from more traditional marketing routes, we're dragging ourselves  
kicking and screaming into the 21st century by aiming to get exposure  
on Facebook and Twitter (@tcuk_conf) to name but two. I'm also  
contacting groups that are appropriate to myself and other tech comms  
specialists (I'm a Framemaker and InDesign user).

If you're interested, please take a look at the conference web site,  
sign up to the newsletter or register:

http://www.technicalcommunicationuk.com/

While the conference is primarily aimed at UK/European delegates,  
anyone is welcome to attend.

Best regards,

Martin Ley

--

Martin Ley, BSc FISTCTel: 01638 744173
Em-Dash Publications Mob: 07803 297354
84 High Street   Fax: 07050 617896
Burwell
Cambridgeemail: martin at em-dash.com
CB25 0HD  www: em-dash.com

VAT Reg: 823 3397 30
--

Shades of grey in Frame

[Lea Rush]

Hi,

 

I started with FM7, creating a user's manual for our equipment. I dutifully
imported the graphics by reference, using JPEG images (I didn't know any
better back then). Still, the output fit my needs, and it worked fine.

 

Now I've upgraded to FM8, and those same graphics have 'aged' in a very
strange way. The printed output now has a grey patina overlaying the
imported graphic. I hesitate to try PNG because the truly ancient software I
used then doesn't list it as an option, and I'd have to export as BMP,
convert to PNG and go from there. Does anyone have any matching experience?
Is there a fix other than recreating the graphics in a more Frame-friendly
format?

 

Frame 8.0p277

Graphics type: B&W line drawings

Original graphics software: Flow Charts & More! (We were a very small
company then.)

Vista SP1

 

Thanks in advance,

Lea


_ 

Lea Rush 
Software and Documentation Specialist 
Astoria-Pacific International 
PO Box 830 Clackamas OR 97015 
PH: 800-657-3010 
FAX:  503-655-7367 

 

___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Shades of grey in Frame

[Lea Rush]

Hi,



I started with FM7, creating a user's manual for our equipment. I dutifully
imported the graphics by reference, using JPEG images (I didn't know any
better back then). Still, the output fit my needs, and it worked fine.



Now I've upgraded to FM8, and those same graphics have 'aged' in a very
strange way. The printed output now has a grey patina overlaying the
imported graphic. I hesitate to try PNG because the truly ancient software I
used then doesn't list it as an option, and I'd have to export as BMP,
convert to PNG and go from there. Does anyone have any matching experience?
Is there a fix other than recreating the graphics in a more Frame-friendly
format?



Frame 8.0p277

Graphics type: B&W line drawings

Original graphics software: Flow Charts & More! (We were a very small
company then.)

Vista SP1



Thanks in advance,

Lea


_ 

Lea Rush 
Software and Documentation Specialist 
Astoria-Pacific International 
PO Box 830 Clackamas OR 97015 
PH: 800-657-3010 
FAX:  503-655-7367 

Re: Publishing a Frame book on the Amazon Kindle

[Stuart Rogers]

Art Campbell wrote:

> I'd expect an HTML book from Frame using either native filters,
> MIF3Go, 

Must be the latest upgrade!  (I haven't purchased the program, though, 
so in my case, it's MIF4Go ;-)

TGIF,

-- 
Stuart Rogers
Technical Communicator
Phoenix Geophysics Limited
Toronto, ON, Canada
+1 (416) 491-7340 x 325

srogers phoenix-geophysics com

"Ah, but a man's screech should exceed his rasp, or what's a violin for?"

--with apologies to Robert Browning and the people next door
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Silicon Prairie plug-ins updated for FrameMaker 9

[Lin Sims]

And lucky me, I'm just now updating (after how many years?) my list of
Frame plugins, so this information is quite timely.


Lin Sims

On Fri, May 8, 2009 at 11:19 AM, RJ Jacquez  wrote:
> Hi Steve, thanks for letting us know, and for updating your plug-ins to 
> FrameMaker 9, we truly appreciate that!
>
> I just let my Twitter Followers about it, hopefully it drives some traffic to 
> your site: http://twitter.com/rjacquez/statuses/1738312036
>
> Thanks again!
>
>
> RJ J?cquez
> Senior Product Evangelist
> Adobe Technical Communication Suite
> Adobe eLearning Solutions
> http://blogs.adobe.com/rjacquez
> Twitter: @rjacquez
>
> -Original Message-
> From: framers-bounces at lists.frameusers.com [mailto:framers-bounces at 
> lists.frameusers.com] On Behalf Of steve at siliconprairiesoftware.com
> Sent: Friday, May 08, 2009 6:06 AM
> To: framers at lists.frameusers.com
> Subject: ANN: Silicon Prairie plug-ins updated for FrameMaker 9
>
> The following plug-ins from Silicon Prairie Software have been updated to
> work with FrameMaker 9:
>
> - Alert Tool
> - Auto-Text
> - Character Tools
> - Index Tools
> - Index Tools Professional
> - LEP Tools
> - Master Page Tools
> - Outline Tools
> - Paragraph Tools
> - Readability Tools
> - Table Tools
>
> If you have any of these plug-ins and are moving to FrameMaker 9, you need
> to download the updated versions. The upgrade is free for registered
> owners. To get them, use the Download link on the Silicon Prairie web
> site:
>
> http://www.siliconprairiesoftware.com
>
> If you aren't moving to FrameMaker 9, you can still download the plug-ins.
> They're available for FrameMaker versions 6.x, 7.x, and 8.x as well.

Re: Publishing a Frame book on the Amazon Kindle

[Art Campbell]

I may not be fully understanding the question, but because the
deliverable format is HTML or HTML-based
(http://www.amazon.com/gp/help/customer/display.html?nodeId=200140600),
 why would it matter what the authoring platform was, so long as it
output clean HTML (or one of the other formats)? The whole idea behind
HTML and format-independent structured formats is to remove the
authoring platform as a factor from the end product.

I'd expect an HTML book from Frame using either native filters,
MIF3Go, or another third-party filter to work as well as any other
product from any other source tool. I've never had a problem
integrating Frame-sourced HTML into a web page...

Art

Art Campbell
   art.campb...@gmail.com
  "... In my opinion, there's nothing in this world beats a '52
Vincent and a redheaded girl." -- Richard Thompson
  No disclaimers apply.
   DoD 358



On Fri, May 8, 2009 at 2:06 PM, Tina Ricks  wrote:
> Does anyone have experience with publishing a print book created in Frame
> for the Amazon Kindle? From what I've managed to figure out from the web,
> the output is HTML, and there are a lot of dos and don'ts available from
> Amazon. None of these, of course, refer to specific software that a book
> might be created in. It seems as if most of the traditional publishing world
> (big publishers like Random House, Harper, and so on) use InDesign, not
> FrameMaker.
>
>
>
> If anyone has tips or a useful site, please point me in that direction.
> Thanks.
>
>
>
> Tina Ricks | Editor | Trial Guides
>
> www.trialguides.com
>
> t...@trialguides.com
>
> ___
>
>
> You are currently subscribed to Framers as art.campb...@gmail.com.
>
> Send list messages to fram...@lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscr...@lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com
>
> Send administrative questions to listad...@frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Publishing a Frame book on the Amazon Kindle

[Tina Ricks]

Does anyone have experience with publishing a print book created in Frame
for the Amazon Kindle? From what I've managed to figure out from the web,
the output is HTML, and there are a lot of dos and don'ts available from
Amazon. None of these, of course, refer to specific software that a book
might be created in. It seems as if most of the traditional publishing world
(big publishers like Random House, Harper, and so on) use InDesign, not
FrameMaker.

 

If anyone has tips or a useful site, please point me in that direction.
Thanks.

 

Tina Ricks | Editor | Trial Guides

www.trialguides.com

t...@trialguides.com

___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Publishing a Frame book on the Amazon Kindle

[Tina Ricks]

Does anyone have experience with publishing a print book created in Frame
for the Amazon Kindle? From what I've managed to figure out from the web,
the output is HTML, and there are a lot of dos and don'ts available from
Amazon. None of these, of course, refer to specific software that a book
might be created in. It seems as if most of the traditional publishing world
(big publishers like Random House, Harper, and so on) use InDesign, not
FrameMaker.



If anyone has tips or a useful site, please point me in that direction.
Thanks.



Tina Ricks | Editor | Trial Guides

www.trialguides.com

tina at trialguides.com

Re: OT: Technical illustrations - Outlining a line drawing

[Ben Hechter]

Nadine,

Paint Shop Pro has a simple Add Borders function (Image>Add Borders) that can 
easily be applied repetitively to an entire set of images.

HTH,

Ben

Ben Hechter 
bhech...@objectives.ca
www.semitake.com
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

OT: Technical illustrations - Outlining a line drawing

[Ben Hechter]

Nadine,

Paint Shop Pro has a simple Add Borders function (Image>Add Borders) that can 
easily be applied repetitively to an entire set of images.

HTH,

Ben

Ben Hechter 
bhechter at objectives.ca
www.semitake.com

ANN: Silicon Prairie plug-ins updated for FrameMaker 9

[st...@siliconprairiesoftware.com]

The following plug-ins from Silicon Prairie Software have been updated to
work with FrameMaker 9:

- Alert Tool
- Auto-Text
- Character Tools
- Index Tools
- Index Tools Professional
- LEP Tools
- Master Page Tools
- Outline Tools
- Paragraph Tools
- Readability Tools
- Table Tools

If you have any of these plug-ins and are moving to FrameMaker 9, you need
to download the updated versions. The upgrade is free for registered
owners. To get them, use the Download link on the Silicon Prairie web
site:

http://www.siliconprairiesoftware.com

If you aren't moving to FrameMaker 9, you can still download the plug-ins.
They're available for FrameMaker versions 6.x, 7.x, and 8.x as well.

Re: Silicon Prairie plug-ins updated for FrameMaker 9

[Lin Sims]

And lucky me, I'm just now updating (after how many years?) my list of
Frame plugins, so this information is quite timely.


Lin Sims

On Fri, May 8, 2009 at 11:19 AM, RJ Jacquez  wrote:
> Hi Steve, thanks for letting us know, and for updating your plug-ins to 
> FrameMaker 9, we truly appreciate that!
>
> I just let my Twitter Followers about it, hopefully it drives some traffic to 
> your site: http://twitter.com/rjacquez/statuses/1738312036
>
> Thanks again!
>
>
> RJ Jácquez
> Senior Product Evangelist
> Adobe Technical Communication Suite
> Adobe eLearning Solutions
> http://blogs.adobe.com/rjacquez
> Twitter: @rjacquez
>
> -Original Message-
> From: framers-boun...@lists.frameusers.com 
> [mailto:framers-boun...@lists.frameusers.com] On Behalf Of 
> st...@siliconprairiesoftware.com
> Sent: Friday, May 08, 2009 6:06 AM
> To: framers@lists.frameusers.com
> Subject: ANN: Silicon Prairie plug-ins updated for FrameMaker 9
>
> The following plug-ins from Silicon Prairie Software have been updated to
> work with FrameMaker 9:
>
> - Alert Tool
> - Auto-Text
> - Character Tools
> - Index Tools
> - Index Tools Professional
> - LEP Tools
> - Master Page Tools
> - Outline Tools
> - Paragraph Tools
> - Readability Tools
> - Table Tools
>
> If you have any of these plug-ins and are moving to FrameMaker 9, you need
> to download the updated versions. The upgrade is free for registered
> owners. To get them, use the Download link on the Silicon Prairie web
> site:
>
> http://www.siliconprairiesoftware.com
>
> If you aren't moving to FrameMaker 9, you can still download the plug-ins.
> They're available for FrameMaker versions 6.x, 7.x, and 8.x as well.
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Add information to registry ?

[Jo Watkiss]

Hi Framers,

Every time I open FrameMaker I get a message 'Are you sure you want to
add the information in C:\Documents and Settings\jowatkiss\Local
Settings\Temp\frmreg.reg to the registry?'

This has only started very recently, and I can't tie it in to any
software updates.

I'm not sure if this is indicative of a problem - and should I be
selecting Yes or No?

I'm still using FrameMaker 6 (although have 9 installed also), on Win XP
Professional, SP3.

Thanks for any advice,
Jo Watkiss

_ 
Disclaimerhttp://www.watkiss.com/terms.htm
This email is confidential and intended solely for the use of the individual to 
whom it is addressed. 
Any views or opinions presented are solely that of the author and do not 
necessarily represent those of Watkiss Automation Ltd.
If you are not the intended recipient, be advised that you have received this 
email in error and that any use, dissemination, forwarding, printing, or 
copying of this email is strictly prohibited. 
If you received this email in error please notify Watkiss Automation Ltd on 
telephone +44 1767 685700. 

RE: Silicon Prairie plug-ins updated for FrameMaker 9

[RJ Jacquez]

Hi Steve, thanks for letting us know, and for updating your plug-ins to 
FrameMaker 9, we truly appreciate that!

I just let my Twitter Followers about it, hopefully it drives some traffic to 
your site: http://twitter.com/rjacquez/statuses/1738312036

Thanks again!


RJ Jácquez
Senior Product Evangelist
Adobe Technical Communication Suite
Adobe eLearning Solutions
http://blogs.adobe.com/rjacquez
Twitter: @rjacquez

-Original Message-
From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of 
st...@siliconprairiesoftware.com
Sent: Friday, May 08, 2009 6:06 AM
To: framers@lists.frameusers.com
Subject: ANN: Silicon Prairie plug-ins updated for FrameMaker 9

The following plug-ins from Silicon Prairie Software have been updated to
work with FrameMaker 9:

- Alert Tool
- Auto-Text
- Character Tools
- Index Tools
- Index Tools Professional
- LEP Tools
- Master Page Tools
- Outline Tools
- Paragraph Tools
- Readability Tools
- Table Tools

If you have any of these plug-ins and are moving to FrameMaker 9, you need
to download the updated versions. The upgrade is free for registered
owners. To get them, use the Download link on the Silicon Prairie web
site:

http://www.siliconprairiesoftware.com

If you aren't moving to FrameMaker 9, you can still download the plug-ins.
They're available for FrameMaker versions 6.x, 7.x, and 8.x as well.


___


You are currently subscribed to Framers as rjacq...@adobe.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/rjacquez%40adobe.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Silicon Prairie plug-ins updated for FrameMaker 9

[RJ Jacquez]

Hi Steve, thanks for letting us know, and for updating your plug-ins to 
FrameMaker 9, we truly appreciate that!

I just let my Twitter Followers about it, hopefully it drives some traffic to 
your site: http://twitter.com/rjacquez/statuses/1738312036

Thanks again!


RJ J?cquez
Senior Product Evangelist
Adobe Technical Communication Suite
Adobe eLearning Solutions
http://blogs.adobe.com/rjacquez
Twitter: @rjacquez

-Original Message-
From: framers-bounces at lists.frameusers.com [mailto:framers-bounces at 
lists.frameusers.com] On Behalf Of st...@siliconprairiesoftware.com
Sent: Friday, May 08, 2009 6:06 AM
To: framers at lists.frameusers.com
Subject: ANN: Silicon Prairie plug-ins updated for FrameMaker 9

The following plug-ins from Silicon Prairie Software have been updated to
work with FrameMaker 9:

- Alert Tool
- Auto-Text
- Character Tools
- Index Tools
- Index Tools Professional
- LEP Tools
- Master Page Tools
- Outline Tools
- Paragraph Tools
- Readability Tools
- Table Tools

If you have any of these plug-ins and are moving to FrameMaker 9, you need
to download the updated versions. The upgrade is free for registered
owners. To get them, use the Download link on the Silicon Prairie web
site:

http://www.siliconprairiesoftware.com

If you aren't moving to FrameMaker 9, you can still download the plug-ins.
They're available for FrameMaker versions 6.x, 7.x, and 8.x as well.


___


You are currently subscribed to Framers as rjacquez at adobe.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/rjacquez%40adobe.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Add information to registry ?

[Les Smalley]

Jo -

Do you get this message when starting FM 6, FM 9 or both?  Have you looked at 
the contents of the fmreg.reg file (it's really just a text file so you can 
open it in notepad or similar editor) to see what it is trying to add?

Typically, these sort of files update the registry to associate file types with 
applications, etc.   It may be because you loaded FM 9 and the install process 
didn't delete its temporary files - did this message start to appear after the 
FM 9 install?

– Les

--- On Fri, 5/8/09, Jo Watkiss  wrote:
Hi Framers,
 
Every time I open FrameMaker I get a message 'Are you sure you want to add the 
information in C:\Documents and Settings\jowatkiss\Local 
Settings\Temp\frmreg.reg to the registry?'
 
This has only started very recently, and I can't tie it in to any software 
updates.
 
I'm not sure if this is indicative of a problem - and should I be selecting Yes 
or No?
 
I'm still using FrameMaker 6 (although have 9 installed also), on Win XP 
Professional, SP3.
 
Thanks for any advice,
Jo Watkiss



  
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Add information to registry ?

[Les Smalley]

Jo -

Do you get this message when starting FM 6, FM 9 or both?? Have you looked at 
the contents of the fmreg.reg file (it's really just a text file so you can 
open it in notepad or similar editor) to see what it is trying to add?

Typically, these sort of files update the registry to associate file types with 
applications, etc. ? It may be because you loaded FM 9 and the install process 
didn't delete its temporary files - did this message start to appear after the 
FM 9 install?

? Les

--- On Fri, 5/8/09, Jo Watkiss  wrote:
Hi Framers,

Every time I open FrameMaker I get a message 'Are you sure you want to add the 
information in C:\Documents and Settings\jowatkiss\Local 
Settings\Temp\frmreg.reg to the registry?'

This has only started very recently, and I can't tie it in to any software 
updates.

I'm not sure if this is indicative of a problem - and should I be selecting Yes 
or No?

I'm still using FrameMaker 6 (although have 9 installed also), on Win XP 
Professional, SP3.

Thanks for any advice,
Jo Watkiss

ANN: Silicon Prairie plug-ins updated for FrameMaker 9

[steve]

The following plug-ins from Silicon Prairie Software have been updated to
work with FrameMaker 9:

- Alert Tool
- Auto-Text
- Character Tools
- Index Tools
- Index Tools Professional
- LEP Tools
- Master Page Tools
- Outline Tools
- Paragraph Tools
- Readability Tools
- Table Tools

If you have any of these plug-ins and are moving to FrameMaker 9, you need
to download the updated versions. The upgrade is free for registered
owners. To get them, use the Download link on the Silicon Prairie web
site:

http://www.siliconprairiesoftware.com

If you aren't moving to FrameMaker 9, you can still download the plug-ins.
They're available for FrameMaker versions 6.x, 7.x, and 8.x as well.


___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Add information to registry ?

[Jo Watkiss]

Hi Framers,
 
Every time I open FrameMaker I get a message 'Are you sure you want to
add the information in C:\Documents and Settings\jowatkiss\Local
Settings\Temp\frmreg.reg to the registry?'
 
This has only started very recently, and I can't tie it in to any
software updates.
 
I'm not sure if this is indicative of a problem - and should I be
selecting Yes or No?
 
I'm still using FrameMaker 6 (although have 9 installed also), on Win XP
Professional, SP3.
 
Thanks for any advice,
Jo Watkiss

_ 
Disclaimerhttp://www.watkiss.com/terms.htm
This email is confidential and intended solely for the use of the individual to 
whom it is addressed. 
Any views or opinions presented are solely that of the author and do not 
necessarily represent those of Watkiss Automation Ltd.
If you are not the intended recipient, be advised that you have received this 
email in error and that any use, dissemination, forwarding, printing, or 
copying of this email is strictly prohibited. 
If you received this email in error please notify Watkiss Automation Ltd on 
telephone +44 1767 685700. 
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.