Tunnelling between Cisco and Freebsd
Hi all, I am running FreeBSD 9.2. The FreeBSD server in on a private IP, 192.168.1.6. I have only one public IP and that's on my verizon firewall configured to port forward to my FreeBSD server. I do not control the Cisco device, but here is the config that was sent to me: interface Tunnel10 ip address 10.1.1.1 255.255.255.252 tunnel source GigabitEthernet0/0/2.1 (187.255.253.1) tunnel destination 107.48.4.129 Here is what I did on my FreeBSD: ifconfig gre0 create ifconfig gre0 10.1.1.2 10.1.1.1 netmask 255.255.255.252 ifconfig gre0 tunnel 192.168.1.6 187.255.253.1 Now I can ping 10.1.1.1 (his end) But when I try to add a static route for his subnets via his tunnel IP, it fails root@devsrvr:/root # route add -net 187.255.252.0/22http://197.255.252.0/2210.1.1.1 route: writing to routing socket: Network is unreachable add net 187.255.252.0 http://197.255.252.0: gateway 10.1.1.1: Network is unreachable Am I missing anything? It's my first time configuring a Tunnel. Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
DNS Proxy
Hi all, I'm running FreeBSD 9.2 with squid for a friend who owns an ISP outside the U.S and uses my FreeBSD squid proxy to access netflix. I've been told this can be also accomplished via DNS Proxy. Is it true? If yes which one do you recommend? Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Server crashes
Hi All, I'm running a very old server (P3, dual 600Mhz, SCSI 9GB harddrive). Applications that I run on it is MySQL and Apache. I have no problem with server uptime but I am not able to update because once I run the command: make buildkernel KERNCONF=SMP Server crashes here mkdep -f .depend_aicasm -a -nostdinc -I/usr/include -I. -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c echo aicasm: /usr/lib/libc.a /usr/lib/libl.a .depend_aicasm cd /usr/src/sys/modules/aic7xxx/aicasm; MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/SMP/modules make -DNO_CPU_CFLAGS all cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm.c cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c /usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm/aicasm_symbol.c cc -O2 -fno-strict-aliasing -pipe -nostdinc -I/usr/include -I. -I/usr/src/sys/modules/aic7xxx/aicasm/../../../dev/aic7xxx/aicasm -c aicasm_gram.c This happens everytime, is there anywhere I can look to see what's going on, or if it's a hardware problem, where is the cause so I can replace. Thanks BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Server crashes
Hello, Thing is no error pops up on screen during the make buildinstall, computer just freezes and I have to reboot. Isn't there any command that might help figuring if any hardware is acting flaky? uname -a storm.whywire.com 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #0: Wed Oct 31 08:02:11 EDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 and from the stable-supfile Trying to upgrade source tag=RELENG_6 storm# dmesg | more Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-PRERELEASE #0: Wed Oct 31 08:02:11 EDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC MPTable: INTEL440GX Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel Pentium III (596.00-MHz 686-class CPU) Origin = GenuineIntel Id = 0x683 Stepping = 3 Features=0x387fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,PN,MMX,FXSR,SSE real memory = 1073741824 (1024 MB) avail memory = 1041743872 (993 MB) ioapic0: Assuming intbase of 0 ioapic0 Version 1.1 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: Intel 82443GX host to PCI bridge pcibus 0 on motherboard pci0: PCI bus on pcib0 agp0: Intel 82443GX host to PCI bridge mem 0xf800-0xfbff at device 0.0 on pci0 pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: display, VGA at device 0.0 (no driver attached) isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 UDMA33 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 6,0xffa0-0xffaf at device 7.1 on pci0 ata0: ATA channel 0 on atapci0 ata1: ATA channel 1 on atapci0 uhci0: Intel 82371AB/EB (PIIX4) USB controller port 0xef80-0xef9f at device 7. 2 on pci0 uhci0: Could not allocate irq device_attach: uhci0 attach returned 6 pci0: bridge at device 7.3 (no driver attached) fxp0: Intel 82559 Pro/100 Ethernet port 0xef00-0xef3f mem 0xfebff000-0xfeb f,0xfea0-0xfeaf irq 10 at device 17.0 on pci0 miibus0: MII bus on fxp0 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:d0:a8:00:66:aa fxp1: Intel 82559 Pro/100 Ethernet port 0xee80-0xeebf mem 0xfebfe000-0xfebfeff f,0xfe80-0xfe8f irq 5 at device 18.0 on pci0 miibus1: MII bus on fxp1 inphy1: i82555 10/100 media interface on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:d0:a8:00:66:ab pcib2: PCI-PCI bridge at device 20.0 on pci0 pci2: PCI bus on pcib2 ahc0: Adaptec 2940 Ultra2 SCSI adapter port 0xd800-0xd8ff mem 0xfe2ff000-0xfe2 f irq 11 at device 15.0 on pci2 ahc0: [GIANT-LOCKED] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs pmtimer0 on isa0 orm0: ISA Option ROMs at iomem 0xc9800-0xcefff,0xcf000-0xd8fff on isa0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: Enhanced floppy controller at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 unknown: PNP0c01 can't assign resources (memory) unknown: PNP0303 can't assign resources (port) unknown: PNP0c02 can't assign resources (port) unknown: PNP0501 can't assign resources (port) unknown: PNP0501 can't assign resources (port) unknown: PNP0401 can't assign resources (port) unknown: PNP0700 can't assign resources (port) Timecounter TSC frequency 595997921 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle acd0: CDROM CD-224E/1.5A at ata1-slave PIO4 (probe0:ahc0:0:0:1): AutoSense Failed (probe0:ahc0:0:0:2): AutoSense Failed (probe0:ahc0:0:0:3): AutoSense Failed (probe0:ahc0:0:0:4): AutoSense Failed (probe0:ahc0:0:0:5): AutoSense Failed (probe0:ahc0:0:0:6): AutoSense Failed (probe0:ahc0:0:0:7): AutoSense Failed da0 at ahc0 bus 0 target 0 lun 0 da0: SEAGATE ST39204LW 0002 Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 8750MB (17921835 512 byte sectors: 255H 63S/T 1115C) Trying to mount root from ufs:/dev/da0s1a On Sunday 23 December 2007, Monah Baki wrote: Hi
Re: Suggestions please for what POP or IMAP servers to use
I'll 3rd it too, been using it for 2 years, amazing. Daniel Bye wrote: with sendmail for the MTA, but I've not used any servers that will allow for POP and IMAP. What in the ports would be good suggestions from those here who've used them? dovecot is excellent - easy setup, stable and reliable, provides IMAP I'll 2nd Dovecot. Been running it for IMAP for 3 years or more. See ports/mail/dovecot and www.dovecot.org -R ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Kernel module error
Hi all, Trying to build kernel and I get the following error: /usr/src/sys/modules/acpi/acpi/../../../contrib/dev/acpica/exmutex.c:373:10: invalid preprocessing directive #return_AGPI_STATUS mkdep: compile failed *** Error code 1 Stop in /usr/src/sys/modules/acpi/acpi. *** Error code 1 Stop in /usr/src/sys/modules/acpi. *** Error code 1 Stop in /usr/src/sys/modules. *** Error code 1 Stop in /usr/obj/usr/src/sys/GENERIC. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Never had this error before and I just cvsup latest stable-supfile FreeBSD 6.3-PRERELEASE Thank you BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Error installing plone
Hi all, I'm trying to install on Freebsd 6.3 plone from ports. I keep geting the error message libtool: link: `gscanner.lo' is not a valid libtool object gmake[4]: *** [libglib.la] Error 1 gmake[4]: Leaving directory `/usr/ports/devel/pkg-config/work/pkg-config-0.22/glib-1.2.8' gmake[3]: *** [all-recursive] Error 1 gmake[3]: Leaving directory `/usr/ports/devel/pkg-config/work/pkg-config-0.22/glib-1.2.8' gmake[2]: *** [all] Error 2 gmake[2]: Leaving directory `/usr/ports/devel/pkg-config/work/pkg-config-0.22/glib-1.2.8' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/devel/pkg-config/work/pkg-config-0.22' gmake: *** [all] Error 2 *** Error code 2 Stop in /usr/ports/devel/pkg-config. *** Error code 1 Stop in /usr/ports/x11/xproto. *** Error code 1 Stop in /usr/ports/x11/libXau. *** Error code 1 Stop in /usr/ports/x11/libX11. *** Error code 1 Stop in /usr/ports/x11-toolkits/tk84. *** Error code 1 Stop in /usr/ports/x11-toolkits/py-tkinter. *** Error code 1 Stop in /usr/ports/graphics/py-imaging. *** Error code 1 Stop in /usr/ports/graphics/py-imaging. *** Error code 1 Stop in /usr/ports/www/plone. Thanks BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ntfs-3g problem
Hi all, We're in the process of copying 600GB to a ntfs volume on freebsd 6.2. I rebooted the server and now all 200GB of data that I copied are no longer visible. If I issue the command df -h, I see 200GB used. How can I retrieve them. I installed from ports fuse-ntfs and ntfsprogs Thanks BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ntfs-3g problem
I copied 7 files totaling 280GB. I then rebooted the freebsd box (without unmounting the ntfs partition) and then when I tried to mount the partition mount -t ntfs-3g /dev/da0s1 /mnt/windows), all files where missing. I could not even see them on the windows server. Yet df -h shows almost 300GB of diskspace used Thank you On Mon, Oct 15, 2007 at 11:43:48AM -0400, Monah Baki wrote: Hi all, We're in the process of copying 600GB to a ntfs volume on freebsd 6.2. I rebooted the server and now all 200GB of data that I copied are no longer visible. If I issue the command df -h, I see 200GB used. How can I retrieve them. I am not quite sure just what you are staying. But, if I sort of get it, probably you only have to close off the file that you are writing - or is it not one big file. jerry I installed from ports fuse-ntfs and ntfsprogs Thanks BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
1 TB data copy
Hi all, We have a windows 2003 server and 1 freebsd 6.2 server. The 2003 server supports USB 1 while the freebsd supports usb 2. We went and purchased an external 1 TB usb 2 harddrive. Our objective is to copy 700GB worth of data from the windows to the freebsd server then take the external harddive to a remote client who runs windows 2003 and then copy the data back to the windows server. The throughput of copying the data from windows to the usb attached to it was ridiculous, more than 12 hours to copy 60GB of data. I tried copying a 1GB file from windows to the usb attached to the freebsd and it took less than 5 minutes, but ofcourse when I tried to mount the usb back to the windows box I could not see the 1GB file that I copied. How can use the freebsd as the destination copy since it has a much better throughput and at the same time have the windows box see the 600GB file that was copied once I attach the usb harddrive to it. Thanks BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 1 TB data copy
Hi all, Installed the following sysutils/fusefs-ntfs sysutils/ntfsprogs When I run the command ntfs-3g /dev/da0s1 /mnt/windows I get the error message fuse: failed to open fuse device: No such file or directory Thank you On 10/12/07, CyberLeo Kitsana [EMAIL PROTECTED] wrote: Bill Moran wrote: In response to Monah Baki [EMAIL PROTECTED]: I'm not completely up to speed with FreeBSD's NTFS support. Last I looked at it, it was experimental and there were warnings everywhere. I assume it's improved since then (~3 years ago) but can't say with authority. As I recall, the native FreeBSD NTFS support is read-only. However, the NTFS-3g project has a mostly complete (and pretty safe) read/write implementation as a FUSE program, which can be found in ports: sysutils/fusefs-ntfs sysutils/ntfsprogs FreeBSD NTFS is not read only, but there are restrictions on what it can write. To quote the man page: There is limited writing ability. Limitations: file must be nonresident and must not contain any sparses (uninitialized areas); compressed files are also not supported. The file name must not contain multibyte charac- ters. If your file name uses only ASCII characters, you will be probably be OK using mount_ntfs to write to an NTFS filesystem. I've used it for years, but mostly for reading files. The few times I've used it for writing, it worked fine. I think you are most likely to have problems if you use it to edit an existing file. - Bob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 1 TB data copy
Solved it. Had to manually run kldload /usr/local/modules/fuse.ko Thank you all for your support. Hi all, Installed the following sysutils/fusefs-ntfs sysutils/ntfsprogs When I run the command ntfs-3g /dev/da0s1 /mnt/windows I get the error message fuse: failed to open fuse device: No such file or directory Thank you On 10/12/07, CyberLeo Kitsana [EMAIL PROTECTED] wrote: Bill Moran wrote: In response to Monah Baki [EMAIL PROTECTED]: I'm not completely up to speed with FreeBSD's NTFS support. Last I looked at it, it was experimental and there were warnings everywhere. I assume it's improved since then (~3 years ago) but can't say with authority. As I recall, the native FreeBSD NTFS support is read-only. However, the NTFS-3g project has a mostly complete (and pretty safe) read/write implementation as a FUSE program, which can be found in ports: sysutils/fusefs-ntfs sysutils/ntfsprogs FreeBSD NTFS is not read only, but there are restrictions on what it can write. To quote the man page: There is limited writing ability. Limitations: file must be nonresident and must not contain any sparses (uninitialized areas); compressed files are also not supported. The file name must not contain multibyte charac- ters. If your file name uses only ASCII characters, you will be probably be OK using mount_ntfs to write to an NTFS filesystem. I've used it for years, but mostly for reading files. The few times I've used it for writing, it worked fine. I think you are most likely to have problems if you use it to edit an existing file. - Bob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
man question
Hi all, I have a machine running freebsd 6.2 stable FreeBSD 6.2-STABLE #5: Sat Mar 17 15:15:14 EDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMP i386 If I issue man ifconfig for example, at the end of the man I get the following: FreeBSD 6.1February 27, 2006 FreeBSD 6.1 How can I fix it to say 6.2 instead of 6.1 Thank you BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Cache server
Hi all, We're deploying a couple of dedicated Freebsd 6.2 servers using Squid. I remember being at the BSDCan 2006 and Poul-Henning was talking about Varnish. Was wandering if anyone deployed it since no one talks about it on the list, and if it is worth installing it as a production cache server. Thanks BSD Networking, Microsoft Notworking ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Atheros card
Hi all, I'm running freebsd 6.0 on a soekris box. I'm trying to configure it as a access point. %dmesg | grep ath0 ath0: Atheros 5212 mem 0xa001-0xa001 irq 11 at device 14.0 on pci0 ath0: Ethernet address: 00:02:6f:20:8f:4a ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 If I configure ath0 in 11b mode, it works fine. However if I configure it in 11g mode or 11a mode, I no longer can connect to it, and my ssid disappears from my macs available access points option. My client is a mac os x 10.4. Here's the ifconfig output for autoselect, 11g and 11a which fails: %ifconfig ath0 media autoselect mode autoselect mediaopt hostap %ifconfig -v ath0 ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.2.187 netmask 0xff00 broadcast 192.168.2.255 inet6 fe80::202:6fff:fe20:8f4a%ath0 prefixlen 64 scopeid 0x6 ether 00:02:6f:20:8f:4a media: IEEE 802.11 Wireless Ethernet autoselect hostap (autoselect hostap) status: associated ssid apname channel 36 (5180) bssid 00:02:6f:20:8f:4a authmode OPEN privacy OFF deftxkey UNDEF powersavemode OFF powersavesleep 100 txpowmax 28 txpower 60 rtsthreshold 2346 fragthreshold 2346 -pureg protmode CTS -wme ssid SHOW apbridge dtimperiod 1 bintval 100 %ifconfig ath0 mode 11g %ifconfig -v ath0 ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.2.187 netmask 0xff00 broadcast 192.168.2.255 inet6 fe80::202:6fff:fe20:8f4a%ath0 prefixlen 64 scopeid 0x6 ether 00:02:6f:20:8f:4a media: IEEE 802.11 Wireless Ethernet autoselect mode 11g hostap status: associated ssid apname channel 1 (2412) bssid 00:02:6f:20:8f:4a authmode OPEN privacy OFF deftxkey UNDEF powersavemode OFF powersavesleep 100 txpowmax 36 txpower 60 rtsthreshold 2346 fragthreshold 2346 -pureg protmode CTS -wme ssid SHOW apbridge dtimperiod 1 bintval 100 %ifconfig ath0 mode 11a %ifconfig -v ath0 ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.2.187 netmask 0xff00 broadcast 192.168.2.255 inet6 fe80::202:6fff:fe20:8f4a%ath0 prefixlen 64 scopeid 0x6 ether 00:02:6f:20:8f:4a media: IEEE 802.11 Wireless Ethernet autoselect mode 11a hostap status: associated ssid apname channel 36 (5180) bssid 00:02:6f:20:8f:4a authmode OPEN privacy OFF deftxkey UNDEF powersavemode OFF powersavesleep 100 txpowmax 28 txpower 60 rtsthreshold 2346 fragthreshold 2346 -pureg protmode CTS -wme ssid SHOW apbridge dtimperiod 1 bintval 100 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Freebsd 5.4+samba
Hi all, I just installed Freebsd 5.4 with samba 3.x, I'm running a calyx software, and the 6 clients are winxp. The smb.conf is as simple as possible. I noticed that some clients are very slow to connect to the share drive and run a database search. The server is a dell 8400 optiplex, no scsi HDD (sata I think), 3Ghz and 512MB Ram. I was wandering if there's a way to optimize samba, or freebsd. Right now performance wise is worse then when they connect to the same database on a win2003 server and I need to get the win2003 server out of the picture. Thank you ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
IPsec How-to
Hi all, I'm reading the FreeBSD handbook, the vpn over ipsec how-to section, but how do I apply it if I have 1 freebsd machine with 1 NIC, and multiple XP boxes in a LAN. All communications nfs, ftp etc etc to that Freebsd machine must be encrypted. Can it be done? is there any how to for this scenario somewhere? Thank you ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
USB Keyboard
Hi all, I'm running Freebsd 5.3 on a Dell GX280 that has both a USB keyboard and mouse. My problem is I added to my /boot/loader.conf file -- hint.atkbd.0.flags=0x1. However, when I need to drop to single user mode, I can no longer use the keyboard. Any help will be greatly appreciated. Thank you ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
plone 2.0.4
Hi All, Once I upgraded ports on my 4.10 server and installed from ports plone-2.0.4, I login as admin and try to click on the sharing tab, I get an error: You do not have sufficient privileges to view this page. If you believe you are receiving this message in error, please send an e-mail to [EMAIL PROTECTED] Any help will be highly appreciated. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
gdm+xfce4
Hi all, I'm running freebsd 5.1, and trying to use gdm login manager and xfce4. At the login username, if I login as root or a normal user, I get a SESSION MENU dialog box CHOOSESESSIONLISTWIDGET and I can only choose 2 options DEFAULT/FAIL SAFE and CANCEL, and nothing happens in either case. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
flash support
Hi all, I'm trying to setup freebsd 4.9 at work as a desktop. I'm having problems with flash, even though I installed it from ports (linux-flashplugin-6.0r69 and flashplugin-mozilla-0.4.10_2 and to name a few ), I still can't view some sites. www.macromedia.com (it says I need to download linux flash whatisthematrix.warnerbros.com/vtour/zionarchives.html (nothing shows up) I applied what the install said about copying some files to the plugins directory of mozilla. Any help will be highly appreciated. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
mplayer problem
Hi all, I'm running the Freebsd 4.9 with mplayer 0.91 and mplayerplug-in for the ports tree and mozilla 1.4. I tried to view the spiderman trailer from apple's website, medium screem no problem, but when I try to choose large screen or full screen, I get a black display, and the following message (repeated 20 times) shows up on my terminal: ImageCodecbandDecompress cress=0xFFCE ( -0x32) -50 It works fine with medium screen. Thank you. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Stuck on GDM and GNOME 2.4
Hi all, I installed from ports gnome 2.4 and gdm on Freebsd 4.9. I copied factory-gdm.conf to gdm.conf, I also copied gdm.sh.sample to gdm.sh. I still can't start gdm I get the following error messages: Dec 27 10:03:15 trinity gdm[193]: Failed to start X server several times in a short time period; disabling display :0 Dec 27 10:08:05 trinity gdm[252]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0 One thing I noticed in the mailing list is not to start gdm at boot time. Which file is needed for that so that I can disable it. Thank you. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Mozilla weirdness
Hello, I just upgraded my ports tree and I'm running gnome 2.4 with mozilla 1.4. I logged in as my username (not root) and double clicked my mozilla icon (which was pointing to /usr/X11R6/ bin/mozilla). 2 things I got confused is it gave me a dialog box saying which profile to use (by default, there was default), so I clicked choose defaut profile, it responded it's already in use. Then all of a sudden every 2-3 seconds it gave the same dialog box and I couldn't quit, so I had to reboot. This is my 'top' as you can see a lot of mozilla-bin running, any suggestions will be highly appreciated. Thank you. PID TT STAT TIME COMMAND 0 ?? DLs0:00.02 (swapper) 0 ?? ZW 0:00.00 (nautilus) 1 ?? SLs0:00.04 /sbin/init -- 2 ?? DL 0:00.09 (g_event) 3 ?? DL 0:00.95 (g_up) 4 ?? DL 0:01.28 (g_down) 5 ?? IL 0:00.00 (acpi_task0) 6 ?? IL 0:00.00 (acpi_task1) 7 ?? IL 0:00.00 (acpi_task2) 8 ?? RL 0:15.83 (pagedaemon) 9 ?? DL 0:00.58 (vmdaemon) 10 ?? DL 0:00.00 (ktrace) 11 ?? RL 0:25.09 (idle) 12 ?? WL 0:00.03 (swi1: net) 13 ?? WL 0:02.03 (swi7: tty:sio clock) 15 ?? DL 0:00.33 (random) 16 ?? WL 0:00.00 (swi6: acpitaskq) 23 ?? DL 0:00.08 (acpi_thermal) 24 ?? WL 0:00.00 (irq14: ata0) 25 ?? WL 0:01.52 (irq15: ata1) 27 ?? DL 0:00.00 (usb0) 28 ?? DL 0:00.00 (usbtask) 29 ?? DL 0:00.00 (usb1) 31 ?? WL 0:00.04 (irq11: vr0) 35 ?? WL 0:00.04 (irq1: atkbd0) 36 ?? WL 0:00.17 (irq12: psm0) 39 ?? RL 0:01.44 (pagezero) 40 ?? DL 0:00.01 (bufdaemon) 41 ?? DL 0:00.14 (syncer) 42 ?? DL 0:00.01 (vnlru) 43 ?? IL 0:00.00 (nfsiod 0) 44 ?? IL 0:00.00 (nfsiod 1) 45 ?? IL 0:00.00 (nfsiod 2) 46 ?? IL 0:00.00 (nfsiod 3) 132 ?? IWs0:00.00 adjkerntz -i 237 ?? Ss 0:00.05 /usr/sbin/syslogd -s 328 ?? Ss 0:00.00 /usr/sbin/usbd 375 ?? IWs0:00.00 /usr/sbin/sshd 397 ?? Is 0:00.02 /usr/sbin/cron 424 ?? IWs0:00.00 /usr/sbin/inetd -wW 436 ?? IW 0:00.00 /usr/X11R6/bin/gdm-binary ttyv0 444 ?? S 0:00.13 /usr/X11R6/bin/gdm-binary ttyv0 445 ?? R 0:22.50 /usr/X11R6/bin/XFree86 :0 -auth /usr/X11R6/share/gnom 448 ?? IWs0:00.00 sshd: mbaki [priv] (sshd) 457 ?? S 0:00.31 sshd: [EMAIL PROTECTED] (sshd) 460 ?? Ss 0:01.86 gnome-session 470 ?? Ss 0:00.01 /usr/bin/ssh-agent -- gnome-session 472 ?? S 0:03.33 /usr/X11R6/libexec/gconfd-2 13 475 ?? IWs0:00.00 /usr/local/libexec/bonobo-activation-server --ac-acti 479 ?? I 0:00.95 gnome-settings-daemon --oaf-activate-iid=OAFIID:GNOME 490 ?? S 0:01.22 xscreensaver -nosplash 499 ?? Ss 0:05.91 /usr/X11R6/bin/metacity --sm-client-id=default1 506 ?? Ss 0:02.71 gnome-panel --sm-client-id default2 508 ?? Rs 0:04.21 nautilus --no-default-window --sm-client-id default3 510 ?? R 0:13.43 /usr/X11R6/libexec/wnck-applet --oaf-activate-iid=OAF 512 ?? S 0:00.06 /usr/X11R6/libexec/mapping-daemon 514 ?? S 0:01.03 /usr/X11R6/libexec/mixer_applet2 --oaf-activate-iid=O 516 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 558 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 565 ?? S 0:05.21 ./mozilla-bin 580 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 589 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 655 ?? S 0:04.44 ./mozilla-bin 679 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 690 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 692 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 746 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 749 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 759 ?? S 0:04.43 ./mozilla-bin 766 ?? S 0:05.23 ./mozilla-bin 771 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 794 ?? S 0:05.21 ./mozilla-bin 818 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 823 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 835 ?? S 0:04.37 ./mozilla-bin 862 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 871 ?? S 0:04.30 ./mozilla-bin 876 ?? S 0:04.46 ./mozilla-bin 881 ?? S 0:04.46 ./mozilla-bin 894 ?? IW 0:00.00 /bin/sh ./run-mozilla.sh ./mozilla-bin 903 ?? S 0:04.46 ./mozilla-bin 908 ?? S 0:04.46 ./mozilla-bin 915 ?? I 0:00.06 /bin/sh ./run-mozilla.sh ./mozilla-bin 949 ?? S 0:04.48 ./mozilla-bin 956 ?? I 0:00.06 /bin/sh ./run-mozilla.sh ./mozilla-bin 967 ?? I 0:00.06 /bin/sh ./run-mozilla.sh ./mozilla-bin 971 ?? I 0:00.06 /bin/sh ./run-mozilla.sh ./mozilla-bin 991 ?? S
gdm crashes
Hi all, I upgraded my freebsd 5.1 ports tree, so I can install gnome 2.4. When everything was installed, I tried running as root gdm, I got the following error: gdm_cleanup_children: Slave crashed, killing its children. This happens when X is about to start the login screen, flickers and drops to a shell and gives this error. This happens for 8 times, then this remark: The display server has been shut down about 6 times in the last 90 seconds, it is likely that something bad is going on. I will wait for 2 minutes before trying to login again on display :0. I also patched the following http://people.freebsd.org/~marcus/pam_get_user.c.diff By default, I setup the system to run wmaker, so if I type startx, I can get in no problem. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: gdm crashes
Yes I did copy factory-gdm.conf over the current gdm.conf. Same problem. Thank you On Mon, 2003-10-13 at 09:06, Monah Baki wrote: Hi all, I upgraded my freebsd 5.1 ports tree, so I can install gnome 2.4. When everything was installed, I tried running as root gdm, I got the following error: gdm_cleanup_children: Slave crashed, killing its children. This happens when X is about to start the login screen, flickers and drops to a shell and gives this error. This happens for 8 times, then this remark: The display server has been shut down about 6 times in the last 90 seconds, it is likely that something bad is going on. I will wait for 2 minutes before trying to login again on display :0. I also patched the following http://people.freebsd.org/~marcus/pam_get_user.c.diff Did you also copy the factory-gdm.conf over the current gdm.conf? Joe By default, I setup the system to run wmaker, so if I type startx, I can get in no problem. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Flash support
Hi all, I'm running freebsd 5.1, Windowmaker and mozilla 1.4 browser. I installed from ports linux-flashplugin-6.0r79, flashplugin-mozilla-0.4.10_2 and jpeg-6b_1. I went to this site to test it www.coraccess.com (Customer insists on this site), a partial of the website shows up, not all of it, plus on my xterm I get the following error: /dev/dsp: No such file or directory Improper call to JPEG library in state 202 Unable to read JPEG data My mozilla then freezes and I have to kill the process and restart mozilla. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Flash support
Hi all, I'm running freebsd 5.1, Windowmaker and mozilla 1.4 browser. I installed from ports linux-flashplugin-6.0r79, flashplugin-mozilla-0.4.10_2 and jpeg-6b_1. I went to this site to test it www.coraccess.com (Customer insists on this site), a partial of the website shows up, not all of it, plus on my xterm I get the following error: /dev/dsp: No such file or directory Improper call to JPEG library in state 202 Unable to read JPEG data My mozilla then freezes and I have to kill the process and restart mozilla. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: mplayer one last time :(
mplayer version 0.90.0.110, and mplayerplug-in version 0.71, updated the ports 2 days ago. Thank you. On Sat, 6 Sep 2003 00:35:26 -0400, Matthew Emmerton wrote [ corrected top-posting ] On Fri, 5 Sep 2003 16:25:52 -0500, Dan Nelson wrote In the last episode (Sep 05), Monah Baki said: Hi, sorry for being ignorant, but I don't want to switch to another OS if freebsd can do the job. Based on the advices I installed the following on Freebsd 5.1: multimedia/openquicktime multimedia/mplayer www/mplayer-plugin www/mozilla (1.4) www/mplayer-fonts Still can't get mplayer working. I have all the required ports installed based on what the freebsd.com/ports website said, I can't think of anything else, I'm completely lost here. Can't get mplayer working meaning what? Got an error message? -- Dan Nelson [EMAIL PROTECTED] When I choose a trailer I get the following error message on my xterm: To get best performance recompile mplayer with --disable-runtime-cpudetection Reading config file /usr/local/share/mplayer/mplayer.conf: no such file or directory Reading config file /root/.mplayer/config reading /root/.mplayer/codecs.conf: can't open /root/.mplayer/codecs.conf: no such file or directory reading /usr/local/share/mplayer/codecs.conf: 50 audio 136 video codecs can't load font bitmap: arpi_osd_a.raw can't load font bitmap: arpi_osd_a.raw Audio extra header: len=92 fcc=0x77617665 win32 libquicktime loader (c) Sascha Sommer Standard init done you may now call supported functions loader_init DONE??? loader_init DONE! external func COMCTL32.dll:17 external func COMCTL32.dll:16 Quicktime6 DLLs found QuickTime.qts patched !!! old entry=0x6693b330 theQuickTimeDispatcher catched -0x6693b330 Win32 warning Accessed uninitialized Critical section (0x66bc4210)! Warning invalid Ptr Handle Win32 warning Accessed uninitialized Critical section (0x66bc41f8)! I couldn't find on my system mplayer.conf nor arpi_osd_a.raw. I did a default install of mplayer, did not modify anything. I personally debugged a problem just like this one which turned out to be caused by mplayer not recognizing my Intel CPU properly. It fed the wrong CPU information to the QuickTime 6 DLLs which caused them to crash just like this. The version in the FreeBSD ports collection is 0.90rc3, and my patches are in the ports tree (not part of the main mplayer code yet.) What version are you using? -- Matt Emmerton ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: VT82C686/A/B AC'97 Audio Codec
Have you tried recompiling the kernel with device pcm On Sat, 6 Sep 2003 15:51:50 +0500, Timur wrote Hi! I have integrated via82c686 soundcard.. I am new to freebsd (coming from linux), and wishing to use it instead windows at work. The sound card in Windows XP is shown as AC97 codec, and works well. Unfortunately, I have no luck with making it work under freebsd. What I am trying to do is to load via82c686 driver.. it loads, but the kernel does not writes any messages about detected card (it with CMI8xxx card at home).. My FreeBSD is 4.8-RELEASE Any help and suggestions will be greatly appreciated! Timur. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
mplayer one last time :(
Hi, sorry for being ignorant, but I don't want to switch to another OS if freebsd can do the job. Based on the advices I installed the following on Freebsd 5.1: multimedia/openquicktime multimedia/mplayer www/mplayer-plugin www/mozilla (1.4) www/mplayer-fonts Still can't get mplayer working. I have all the required ports installed based on what the freebsd.com/ports website said, I can't think of anything else, I'm completely lost here. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: mplayer one last time :(
I got it running in Linux all I need to is to compile the following: openquicktime-1.0-src.tar win32codecs.tar MPlayer-0.91.tar.bz2 mplayerplug-in-0.80.tar.gz mini.tar.bz2 Blue-1.0.tar qt6dlls.tar.bz2 Those too are the same files that freebsd looks for, but all I get is a white dialog box saying loading movie, when I click on a movie in quicktime.apple.com. On Fri, 05 Sep 2003 13:51:09 -0700, James Leone wrote Monah Baki wrote: Hi, sorry for being ignorant, but I don't want to switch to another OS if freebsd can do the job. Based on the advices I installed the following on Freebsd 5.1: multimedia/openquicktime multimedia/mplayer www/mplayer-plugin www/mozilla (1.4) www/mplayer-fonts Still can't get mplayer working. I have all the required ports installed based on what the freebsd.com/ports website said, I can't think of anything else, I'm completely lost here. You are not alone., but my struggles have been in Linux... James Leone ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: mplayer one last time :(
When I choose a trailer I get the following error message on my xterm: To get best performance recompile mplayer with --disable-runtime-cpudetection Reading config file /usr/local/share/mplayer/mplayer.conf: no such file or directory Reading config file /root/.mplayer/config reading /root/.mplayer/codecs.conf: can't open /root/.mplayer/codecs.conf: no such file or directory reading /usr/local/share/mplayer/codecs.conf: 50 audio 136 video codecs can't load font bitmap: arpi_osd_a.raw can't load font bitmap: arpi_osd_a.raw Audio extra header: len=92 fcc=0x77617665 win32 libquicktime loader (c) Sascha Sommer Standard init done you may now call supported functions loader_init DONE??? loader_init DONE! external func COMCTL32.dll:17 external func COMCTL32.dll:16 Quicktime6 DLLs found QuickTime.qts patched !!! old entry=0x6693b330 theQuickTimeDispatcher catched -0x6693b330 Win32 warning Accessed uninitialized Critical section (0x66bc4210)! Warning invalid Ptr Handle Win32 warning Accessed uninitialized Critical section (0x66bc41f8)! I couldn't find on my system mplayer.conf nor arpi_osd_a.raw. I did a default install of mplayer, did not modify anything. On Fri, 5 Sep 2003 16:25:52 -0500, Dan Nelson wrote In the last episode (Sep 05), Monah Baki said: Hi, sorry for being ignorant, but I don't want to switch to another OS if freebsd can do the job. Based on the advices I installed the following on Freebsd 5.1: multimedia/openquicktime multimedia/mplayer www/mplayer-plugin www/mozilla (1.4) www/mplayer-fonts Still can't get mplayer working. I have all the required ports installed based on what the freebsd.com/ports website said, I can't think of anything else, I'm completely lost here. Can't get mplayer working meaning what? Got an error message? -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
mplayer quicktime killing me
Hi, I got mplayer and openquicktime running 3 days ago, don't know how I did and I can't seem to replicate the procedure. I'm running 5.1/Windowmaker, and I know I need to install from ports: multimedia/openquicktime multimedia/mplayer www/mplayer-plugin www/mozilla (1.4) When I go to quicktime.apple.com/trailer, a white background shows up and no movie (it says mplayer-plugin - loading movie) nothing else. However my xterm displays the following: Reading config file /usr/local/share/mplayer/mplayer.conf: no such file or directory Can't load font bitmap: iso-8859-1-a.raw I searched my system for mplayer.conf, it does not exist. Thank you (this time I'm documenting) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
/dev/dsp: device busy
Hi all, I'm using Freebsd 4.8 and mozilla 1.4. Whenever I go to google.com or yahoo.com to search for something, I get /dev/dsp: Device busy. I can get to any url, but can't seem to search for anything (cnn.com, in the dialog box to getting my home town weather, will not work). Thank you. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: /dev/dsp: device busy
I'm running windowmaker On Mon, 1 Sep 2003 13:46:52 +, Alexander Farber wrote Do you maybe run KDE and arts which blocks /dev/dsp? On Mon, Sep 01, 2003 at 09:54:34AM -0400, Monah Baki wrote: I'm using Freebsd 4.8 and mozilla 1.4. Whenever I go to google.com or yahoo.com to search for something, I get /dev/dsp: Device busy. I can get to any url, but can't seem to search for anything (cnn.com, in the dialog box to getting my home town weather, will not work). ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Quicktime Trailers
Hi all, I'm trying to setup a Freebsd 5.1 machine to be able to watch quicktime trailers from apple's website. I installed from ports: qtutils libquicktime openquicktime However, the site tells me I'm still missing a plugin and can't view the trailer. Any help will be highly appreciated. Thanks. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Quicktime Trailers
Thank you, I'm now farther than where I was before, however, when I click on the trailer, a dialog box for mplayerplug-in pops up and its says loading movie but nothing else shows up, background is white. On Saturday, August 30, 2003, at 10:30 AM, Hendrik Hasenbein wrote: Monah Baki wrote: Hi all, I'm trying to setup a Freebsd 5.1 machine to be able to watch quicktime trailers from apple's website. I installed from ports: qtutils libquicktime openquicktime However, the site tells me I'm still missing a plugin and can't view the trailer. Any help will be highly appreciated. To get a plugin in your browser I recommend to use ports/mplayerplug-in. That should allow you to view the trailer. If you get no sound, don't worry. That's not your fault. Some new trailer use an audiocodec which I only got in the latest windoze qt-player. It won't even play sound on a Mac. Hendrik ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
WDM problem
Hi all, I'm trying to execute wdm, I get : error 13 binding socket address 177 Cannot open server authrization file /usr/X11R6/lib/X11/wdm/authdir/authfiles/A:0- yooW24 I get the login screen but thats it, the background/beastie.jpg is missing and I can't login. This only happens if I login as non root. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
NFS/Epiphany error
Hi all, I'm trying to run epiphany bowser, I have my users home directory mounted via nfs from a freebsd 4.8 machine, the client is a freebsd 5.1. I get the error: rpc.lockd:clntudp_create: RPC: program not registered. rpc.lockd: Unable to return result to Server's IP Address Client has rpc.statd rpc.lockd enabled Server has portmapper enabled and in inetd.conf I enabled: rstatd/1-3 dgram rpc/udp wait root /usr/libexec/rpc.rstatd rpc.rstatd Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Ports question
Hi all, I recently upgraded my ports directory. I created the directory/file /usr/ports/package/INDEX. When I run /stand/sysinstall and configure a package from a existing filesystem (/usr/ports) I can see all the files, but when I try to install a package, I get the error: Unable to fetch package bash-2.05b.007 from selected media. No package add will be done. I'm running Freebsd 5.1. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Ports question
Hi all, I recently upgraded my ports directory. I wanted to install packages using sysin stall, so I created a directory /usr/ports/packages and copied the index file to it. However, when I run sysinstall and choose packages from an existing system (bash) I get an error: Unable to fetch package bash-2.05b.007 from selected media. No package add will be done. I'm running Freebsd 5.1. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Boot question
Hi, I have a remote server running freebsd 4.8 5.1 on 2 partitions. Is there a way to ssh to the box and modify a file that tells which version to run when I reboot the machine, since I can't physically be on it. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
openldap ssh problem
Hi all, I'm just installed freebsd 5.1 running openldap and pam_ldap from padl.com. I created a userid and made sure he had 2 different password in /etc/passwd and in the openldap database. I was able to ssh using the openldap database password when the user exist locally (/etc/passwd), but when I deleted his local account, I can no longer ssh using the openldap database password. my /etc/pam.d/ssh file: auth sufficient pam_ldap.so auth required pam_nologin.so auth required pam_unix.so accountsufficient pam_ldap.so accountrequired pam_unix.so sessionsufficient pam_ldap.so sessionrequired pam_unix.so password sufficient pam_ldap.so password required pam_unix.so Am I missing anything Thank you. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Pam Question
Hi all, I'm trying to setup a freebsd 4.8 server with openldap for authentication. I installed pam from the ports tree, and verified /etc/pam.conf does exist. How does freebsd know when to use pam Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Spanish KDE
Hi all, I'm running kde 3.1 (english verion) on my FreeBSD 4.8. I would like to test the spanish version of KDE. I downloaded from kde the 11MB file kde-i18n-es. Configure runs with no error, however make starts generating these error: /usr/local/bin/meinproc --check --cache index.cache.bz2 ./index.docbook *** Error code 1 Stop in /home/user/kde-il8n-030628/es/docs/kdenonbeta/kgeo *** Error code 1 Stop in /home/user/kde-il8n-030628/es/docs/kdenonbeta *** then a lot of error messages: index.docbook:81: validity error: no declaration for element para index.docbook:90: error: entity 'kgeo' not defined index.docbook: error: validity error: no declaration for element mail I get tons of the following error message. Thank you ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
KDM help
Hi All, Is there anyway in kdm to hide all the users on the left hand side, and have just the login password option. I read something about kdmconfig but all the articles where related to solaris. Thank you. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
