Job Posting?
Hi, I work with the Visual Computing Group here at Intel Corporation. We are looking for some Operating Systems Engineers with Unix kernel and FreeBSD experience. Please review the job descriptions below and let me know if it would be possible to post or distribute these job opportunities to FreeBSG.org members. Intel's Visual Computing Group (VCG) has the mission to establish the future of computing for high-throughput applications. We are initially focused on developing advanced products based on a many-core architecture targeting high-end client platforms. We're aggressively positioned to advance the state of the art in graphics and other high-throughput workloads. Our vision is that the resulting ingredients and technology will extend to other platforms including mobile clients, servers, and embedded applications over time. Operating Systems Engineer - 546420 Responsibilities and Details Description The newly formed Visual Computing Group is seeking a number of smart software engineers and/or architects with expertise with operating system internals and drivers to make extensive changes to a Unix operating system for this specialized application. In this position, you will be helping drive requirements for hardware interfaces and substantially influence the overall driver architecture and execution direction. You will be working on drivers, major kernel changes, exception and interrupt handlers, firmware, encryption services, thermal and power management, performance analysis, advanced MP thread scheduling, unique page fault handling, and many others. Qualifications You should possess at least a Bachelor of Science degree in Computer Science or Computer Engineering with at least six years of experience in software design and development. A Master's degree is preferred. Additional qualifications include: - Knowledge of operating system internals and theory of operation - Advanced UNIX* programming concepts (pthreads, shared memory and other IPC, driver interface) - Knowledge of x86 processor concepts like paging features, protected mode, SMP support - Excellent C programming skills The following qualifications would be added advantages: - Experience with BSD*-based or Linux* operating systems - Experience with device drivers, especially under UNIX-like operating systems - Experience with highly threaded and high processor count environments - Experience with Vista* display drivers - Experience with video display controllers Operating Systems Engineer - 546419 Responsibilities and Details Description The newly formed Visual Computing Group is seeking a number of smart software engineers and/or architects with expertise with operating system internals and drivers to make extensive changes to a Unix operating system for this specialized application. In this position, you will be helping drive requirements for hardware interfaces and substantially influence the overall driver architecture and execution direction. You will be working on drivers, major kernel changes, exception and interrupt handlers, firmware, encryption services, thermal and power management, performance analysis, advanced MP thread scheduling, unique page fault handling, and many others. Qualifications You must possess at least a Master's degree in Computer Science or Computer Engineering. A Ph.D. degree or work experience is preferred. Additional qualifications include: - Knowledge of operating system internals and theory of operation - Advanced UNIX* programming concepts (pthreads, shared memory and other IPC, driver interface) - Knowledge of x86 processor concepts like paging features, protected mode, SMP support - Excellent C programming skills The following qualifications would be added advantages: - Experience with BSD*-based or Linux* operating systems - Experience with device drivers, especially under UNIX-like operating systems - Experience with highly threaded and high processor count environments - Experience with Vista* display drivers - Experience with video display controllers Best regards, Larry Gonzales Sr. Recruiting Consultant Intel Corporation/VCG [EMAIL PROTECTED] http://www.intel.com/jobs/usa/submit/ If you are a hiring manager or hiring assistant and need help with the hiring tools, please contact the GCM at 1-800-238-0486, Option 2. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
(no subject)
hello! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Backspace
Thanks for helping everybody. But actually I'm using Bourne shell on FreeBSD 6.1 just like the Solaris in lab, and the FreeBSD is freshly installed, I have checked .shrc and .profile, but nothing related to key bindings or stty's there, so what I thought it should be is: after I login - [press backspace] - ^H appears - [press DEL] - ^? appears in emacs - [press backspace] - oops, help appears I think Solaris was just like the above. But in my FreeBSD, things go like: after I login - [press backspace will erase last char] - [press DEL does the same thing] no matter what have I done to stty like stty erase ^H and stty erase2 ^H, the result is just the same, backspace and DEL still can be used to erase last char in shell. The only difference is in emacs, but I searched the net and found that emacs relies on its own definition of key bindings in ~/.emacs file (it is empty in this case), rather than the terminal key bindings. Totally confused. Any idea? Thanks again for you kind people. 2007/8/13, Jerry McAllister [EMAIL PROTECTED]: On Sun, Aug 12, 2007 at 01:31:36PM -0500, Derek Ragona wrote: At 10:54 PM 8/11/2007, d.Z. wrote: Hello, I'm a new user to FreeBSD and Unix. I used Solaris 10 last week in lab, and found there is a difference between them. When Solaris is installed, press backspace will give you ^H, you'll have to stty erase ^H to solve this problem. But with FreeBSD 6.1, when first installed, backspace is always bounded to erase last character, even I have stty erase ^? and stty erase2 ^?, backspace still deletes last character input. Does any body know why is this happening? Solaris by default uses csh for user accounts. The backspace key assignment and for that matter, all key assignments are dependent on the both the shell and terminal definition. Reassigning keys is typical for your shell's startup profile file .cshrc for csh and .bashrc for bash. And strange thing is with default setting (before stty erase and erase2 to ^?), when I use Emacs, C-h will give me back space, instead of help. I know this is desirable for experts, but I'm really new so just want to follow the instruction first. Applications like the shell you use interpret the terminal definition and may or may not use the same key assignments. Most applications like the shells in UNIX environments have startup files to customize the key assignments and in the case of editors even define macros. And those startup files are: For csh and tcsh (tcsh is the most common one in FreeBSD) the startup file is .cshrc in one's home directory. You can also create a system-wide one. For SH and bash it is .profile and for them don't forget to export any variables. jerry Hope this helps. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Backspace
Hello, I'm a new user to FreeBSD and Unix. I used Solaris 10 last week in lab, and found there is a difference between them. When Solaris is installed, press backspace will give you ^H, you'll have to stty erase ^H to solve this problem. But with FreeBSD 6.1, when first installed, backspace is always bounded to erase last character, even I have stty erase ^? and stty erase2 ^?, backspace still deletes last character input. Does any body know why is this happening? And strange thing is with default setting (before stty erase and erase2 to ^?), when I use Emacs, C-h will give me back space, instead of help. I know this is desirable for experts, but I'm really new so just want to follow the instruction first. The $TERM is cons25. Regards, D. Zhang PS: This does not happen in X environment though. I've Google'd but nothing really related came up. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
uncalled for reboot
Greetings to all, I am attempting to run cvsup-without-gui on a Dell Inspiron 1501, with amd64x2 processor and 2GbRAM. I am using the ports-supfile modified to suit location and RELENG_6_1. The process begins, and starts deleting the old stuff...no problem. Then, about 10 minutes into it, the system reboots all by itself - no apparent reason. Any ideas? Season's Greetings, Z. Wade Hampton Twin Bridges, Montana ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: uncalled for reboot
On Saturday 23 December 2006 14:10, Bill Moran wrote: Z. Wade Hampton [EMAIL PROTECTED] wrote: Greetings to all, I am attempting to run cvsup-without-gui on a Dell Inspiron 1501, with amd64x2 processor and 2GbRAM. I am using the ports-supfile modified to suit location and RELENG_6_1. The process begins, and starts deleting the old stuff...no problem. Then, about 10 minutes into it, the system reboots all by itself - no apparent reason. You need to gather and provide considerably more information, unless there's someone on list who is psychic. FreeBSD version, hardware data, etc ... Thanks Bill. I'll keep that in mind. I think I have the problem figured out. *base=/var/db was set in the supfile. After changing it to /usr, the problem went away. Regards, ZWH However, spontaneous reboots are almost always hardware problems. Have you verified that your RAM, hard drive, cooling, power, and all other hardware factors are in proper operation? That would be the first logical step in diagnosing this. -Bill ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
nonstandard ports
Hello to all, Not long ago, I ran cvsup successfully. In the example cvs-supfile, the following opening lines exist: # base=/var/db # This specifies the root where CVSup will store information # about the collections you have transferred to your system. # A setting of /var/db will generate this information in # /var/db/sup. Even if you are CVSupping a large number of # collections, you will be hard pressed to generate more than # ~1MB of data in this directory. You can override the # base setting on the command line with cvsup's -b base # option. This directory must exist in order to run CVSup. # # prefix=/home/ncvs # This specifies where to place the requested files. A # setting of /home/ncvs will place all of the files # requested in /home/ncvs (e.g., /home/ncvs/src/bin, # /home/ncvs/ports/archivers). The prefix directory # must exist in order to run CVSup. I attempted running cvsup with base and prefix locations other than the ones stated above; and, it did not work. However, when I edited the supfile as described above, the whole process ran to completion, successfully. Well, now I have an updated ports tree in /home/ncvs/ports instead of /usr/ports. So, my question this morning is what do I do with that? Do I treat /home/ncvs/ports as if it were /usr/ports? Do I copy the entire /home/ncvs/ports directory to /usr/ports for updated ports? Thank you in advance for directives. Z. Wade Hampton Twin Bridges, Montana ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
reposted question
Hello to all, Not long ago, I ran cvsup successfully. In the example cvs-supfile, the following opening lines exist: # base=/var/db # This specifies the root where CVSup will store information # about the collections you have transferred to your system. # A setting of /var/db will generate this information in # /var/db/sup. Even if you are CVSupping a large number of # collections, you will be hard pressed to generate more than # ~1MB of data in this directory. You can override the # base setting on the command line with cvsup's -b base # option. This directory must exist in order to run CVSup. # # prefix=/home/ncvs # This specifies where to place the requested files. A # setting of /home/ncvs will place all of the files # requested in /home/ncvs (e.g., /home/ncvs/src/bin, # /home/ncvs/ports/archivers). The prefix directory # must exist in order to run CVSup. I attempted running cvsup with base and prefix locations other than the ones stated above; and, it did not work. However, when I edited the supfile as described above, the whole process ran to completion, successfully. Well, now I have an updated ports tree in /home/ncvs/ports instead of /usr/ports. So, my question this morning is what do I do with that? Do I treat /home/ncvs/ports as if it were /usr/ports? Do I copy the entire /home/ncvs/ports directory to /usr/ports for updated ports? Thank you in advance for directives. Z. Wade Hampton Twin Bridges, Montana ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
buildkernel error
Hello to all, I have MY_KERNEL in the following location... /usr/src/sys/i386/conf/MY_KERNEL When I run... make buildkernel KERNCONF=MY_KERNEL I get ERROR: Missing kernel configuration file(s) (MY_KERNEL). *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. # I'm running 6.1, fresh cvsup to 6.1-RELEASE-p11. Why won't buildkernel find MY_KERNEL? THanks in advance for any help. Z. Wade Hampton Twin Bridges, MT ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
cvsup and amd64
Greetings to all, I'm running a dell 1501 laptop with amd64x2 processor. I got a disk from a guru specifically for this architecture, booted it, and installed 6.1 via FTP. Yesterday I ran cvsup successfully. Today I did make buildworld successfully. Now, I have a little paranoia about buildkernel. Please tell me, did I need to specify anything specifically about the amd64 architecture when running cvsup? Did I possibly get a GENERIC kernel file through cvsup that is not compatible with amd? Anxious in Montana, Z. Wade Hampton Twin Bridges, MT ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
strange events
Greetings to all, And, please forgive me if this is a bone-head question(s). I'm running, once again after 4 years, freebsd 4.2. In KDE, with netscape or kfm I can only access my own web domain, which is www.oldpathsbaptistchurch.org No matter what else I put into the URL box and submit, it trys to find the other URLs, but then resorts back to www.oldpathsbaptistchurch.org. I must have done something wrong in initial setup/config, but after checking through lots of stuff, I see no reason for this to happen. Also, I get STOP error code 1s when I try to make lynx from the ports collection. Could someone have a little pity on this old stoner from the 60's and lend some advice? Thanks in advance, Z. Wade Hampton Sheridan, Montana UNIX PINE 4.21 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ccd usage
Greetings, I'm planning a new install and my question regards the usage of ccd. I have two disks of 30G and 20G. Is it possible to use ccd to create a single /usr partition across these two disks? How might this be done? Can it be done from the sysinstall menu off the boot disk or will I need to do some toying around after initial install is completed? Also, while not part of the ccd question, if I'm not mistaken, I can create multiple swap partitions to spread swap usage across multiple drives. Is this true? Thanks in advance. Dan Z. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
IBM Thinkpad R51 FreeBSD 4.10???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi All, I recently purchased an IBM Thinkpad R51 and I was looking to install FreeBSD 4.10. Has anyone ever done this? Should I anticipate any problems? Lastly I have never installed FreeBSD on a laptop before are there things that I should know before I get started? Thanks in advance for you help. HZS -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBN9WwlT9WV6TztkoRAol1AJ9CJU9EOAA976RAfYOQNI6v4tf/OgCgkyPC rnr5z0hnkABA5QNVyNnQ1KM= =n2Vy -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature
Re: Network Routing Problems???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Very good, I will try it and let you know thanks so much. Cheers Kevin D. Kinsey, DaleCo, S.P. wrote: | Hakim Z. Singhji wrote: | | I am having problems getting a connection to my FreeBSD gateway from my | Mandrake 10 Linux Machine. I am able to ping, traceroute, ssh etc. the | linux box from my freeBSD machine however I am not able to ping the | gateway. What could be the problem, this is my configuration: | | FreeBSD: Gateway, IPFW NAT running | | | | Is IPFW blocking packets on your inside IF? Try | add allow all from any to any via txp0 and test | again? | | Kevin Kinsey | DaleCo, S.P. | ___ | [EMAIL PROTECTED] mailing list | http://lists.freebsd.org/mailman/listinfo/freebsd-questions | To unsubscribe, send any mail to | [EMAIL PROTECTED] | -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBKZKklT9WV6TztkoRAvstAJ9HXwhGGrde4M2WHneM4wnpax9yvwCbBJNe HEku9QSt6RtMDpUiU9GRuoA= =4b15 -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature
Re: Network Routing Problems???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello All, I want to thank everyone for there help...attached are the config files for my FreeBSD gateway. I have rc.conf, ipfw rule-set and my natd.conf file. I thought that I took care of incoming traffic, maybe you all can help me and show me if I missed anything. Thank in advance Hakim Z. Singhji wrote: | Hello All, | | I am having problems getting a connection to my FreeBSD gateway from my | Mandrake 10 Linux Machine. I am able to ping, traceroute, ssh etc. the | linux box from my freeBSD machine however I am not able to ping the | gateway. What could be the problem, this is my configuration: | | FreeBSD: Gateway, IPFW NAT running | HOSTNAME=redgate | dc0 - 24.199.***.*** [DHCP] | txp0 - 192.168.1.1 | txp1 - unassigned | | Mandrake 10: Workstation | HOSTNAME=metalgate | | [EMAIL PROTECTED]:] route | DestinationGatewayGenmaskInterace | 192.168.1.0*255.255.255.0eth0 | 127.0.0.0*255.0.0.0lo0 | default192.168.1.10.0.0.0eth0 | | [EMAIL PROTECTED]:] ifconfig eth0 | eth0 link encap: Ethernet HiWadd:00:0D:87:27:C7:80 | inet 192.168.1.3 broadcast 192.168.1.255 mask /24 | UP BROADCAST RUNNING MULTICAST MTU 1500 metric 1 | | [EMAIL PROTECTED]:] ping 192.168.1.1 | - --- redgate ping statistics- | 31 packets transmitted, 0 received, 100% packet loss | | ___ | [EMAIL PROTECTED] mailing list | http://lists.freebsd.org/mailman/listinfo/freebsd-questions | To unsubscribe, send any mail to | [EMAIL PROTECTED] | -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBKnc8lT9WV6TztkoRAn09AJ4iP8AS/Ai+vh4lyrCwsXe5/dyYaQCgg2JM uEE8jHfxVr0Zevb4zTufpgs= =Bsc7 -END PGP SIGNATURE- ### # RC.CONF FILE ### Network ## gateway_enable=YES network_interfaces=dc0 txp0 txp1 hostname=redgate.ath.cx ifconfig_dc0=DHCP ifconfig_txp0=inet 192.168.1.1/24 ifconfig_txp1=inet 192.168.1.2/24 natd_enable=dc0 natd_flags=-s -u -f /etc/natd.conf # IPFW firewall_enable=YES firewall_script=/etc/rc.firewall firewall_type=/etc/ipfw.rules firewall_quiet=NO firewall_logging_enable=YES ## Extra Firewalling Options ## log_in_vain=YES tcp_drop_synfin=NO tcp_restrict_rst=YES icmp_drop_redirect=YES MISC RC Rules # ... # IPFW.RULES add 00100 allow ip from any to any via lo0 add 00101 deny ip from any to 127.0.0.0/8 # from man ipfw: allow only tcp connections I've created add 00300 check-state add 00301 deny tcp from any to any in established add 00302 allow tcp from any to any out setup keep-state # allow DNS/UDP Packets add 00400 allow udp from 207.69.188.185 53 to any in recv dc0 add 00401 allow udp from 207.69.188.186 53 to any in recv dc0 add 00402 allow udp from 207.69.188.187 53 to any in recv dc0 add 00403 allow udp from any to any out # allow DHCP add 00500 allow udp from any 68 to 24.29.99.105. 67 out via dc0 add 00501 allow udp from 24.29.99.105 67 to any 68 in via dc0 # uncomment rules 00502 and 00503 if ISP's DHCP server has problems #add 00502 allow udp from any 68 to 255.255.255.255 67 out via dc0 #add 00503 allow udp from any 67 to 255.255.255.255 68 in via dc0 #allow some icmp types (codes not supported) add 00600 allow icmp from any to any icmptypes 3 #allow source quench in and out add 00601 allow icmp from any to any icmptypes 4 #allow me to ping out and receive response back add 00602 allow icmp from any to any icmp types 8 out add 00603 allow icmp from any to any icmptypes 0 in #allow me to run traceroute add 00604 allow icmp from any to any icmptypes 11 in ## # NAT.CONF ## # I'm not at all sure if this is ok for diverting these packets # to my private network machines ip and port numbers??? redirect_port tcp 192.168.1.3:110 110 #pop3 redirect_port udp 192.168.1.3:110 110 #pop3 redirect_port tcp 192.168.1.3:25 25 #smtp redirect_port udp 192.168.1.3:25 25 #smtp redirect_port tcp 192.168.1.3:80 80 #http redirect_port udp 192.168.1.3:80 80 #http smime.p7s Description: S/MIME Cryptographic Signature
Network Routing Problems???
Hello All, I am having problems getting a connection to my FreeBSD gateway from my Mandrake 10 Linux Machine. I am able to ping, traceroute, ssh etc. the linux box from my freeBSD machine however I am not able to ping the gateway. What could be the problem, this is my configuration: FreeBSD: Gateway, IPFW NAT running HOSTNAME=redgate dc0 - 24.199.***.*** [DHCP] txp0 - 192.168.1.1 txp1 - unassigned Mandrake 10: Workstation HOSTNAME=metalgate [EMAIL PROTECTED]:] route Destination Gateway Genmask Interace 192.168.1.0 * 255.255.255.0 eth0 127.0.0.0 * 255.0.0.0 lo0 default 192.168.1.1 0.0.0.0 eth0 [EMAIL PROTECTED]:] ifconfig eth0 eth0 link encap: Ethernet HiWadd:00:0D:87:27:C7:80 inet 192.168.1.3 broadcast 192.168.1.255 mask /24 UP BROADCAST RUNNING MULTICAST MTU 1500 metric 1 [EMAIL PROTECTED]:] ping 192.168.1.1 - --- redgate ping statistics- 31 packets transmitted, 0 received, 100% packet loss ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Network Routing Problems???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello All, I am having problems getting a connection to my FreeBSD gateway from my Mandrake 10 Linux Machine. I am able to ping, traceroute, ssh etc. the linux box from my freeBSD machine however I am not able to ping the gateway. What could be the problem, this is my configuration: FreeBSD: Gateway, IPFW NAT running HOSTNAME=redgate dc0 - 24.199.***.*** [DHCP] txp0 - 192.168.1.1 txp1 - unassigned Mandrake 10: Workstation HOSTNAME=metalgate [EMAIL PROTECTED]:] route Destination Gateway Genmask Interace 192.168.1.0 * 255.255.255.0 eth0 127.0.0.0 * 255.0.0.0 lo0 default 192.168.1.1 0.0.0.0 eth0 [EMAIL PROTECTED]:] ifconfig eth0 eth0 link encap: Ethernet HiWadd:00:0D:87:27:C7:80 inet 192.168.1.3 broadcast 192.168.1.255 mask /24 UP BROADCAST RUNNING MULTICAST MTU 1500 metric 1 [EMAIL PROTECTED]:] ping 192.168.1.1 - - --- redgate ping statistics- 31 packets transmitted, 0 received, 100% packet loss -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBKSBNlT9WV6TztkoRAqX8AJ9qxZpN6LCTDo7F6GZxOrHegNO4yQCeLHGF vd7SoLLlnsYkTQnzczOA9dg= =zhlX -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Network Routing Problems???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello All, I am having problems getting a connection to my FreeBSD gateway from my Mandrake 10 Linux Machine. I am able to ping, traceroute, ssh etc. the linux box from my freeBSD machine however I am not able to ping the gateway. What could be the problem, this is my configuration: FreeBSD: Gateway, IPFW NAT running HOSTNAME=redgate dc0 - 24.199.***.*** [DHCP] txp0 - 192.168.1.1 txp1 - unassigned Mandrake 10: Workstation HOSTNAME=metalgate [EMAIL PROTECTED]:] route Destination Gateway Genmask Interace 192.168.1.0 * 255.255.255.0 eth0 127.0.0.0 * 255.0.0.0 lo0 default 192.168.1.1 0.0.0.0 eth0 [EMAIL PROTECTED]:] ifconfig eth0 eth0 link encap: Ethernet HiWadd:00:0D:87:27:C7:80 inet 192.168.1.3 broadcast 192.168.1.255 mask /24 UP BROADCAST RUNNING MULTICAST MTU 1500 metric 1 [EMAIL PROTECTED]:] ping 192.168.1.1 - - --- redgate ping statistics- 31 packets transmitted, 0 received, 100% packet loss ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBKWtQlT9WV6TztkoRAgZSAKCAAEifTWqv2ZQ6jr6XTIvGZL6j9QCgh53i cU3jAfpHqmvp3mSHYRd5DxE= =LkoA -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature
Another Network Routing Problems???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello All, I am having problems getting a connection to my FreeBSD gateway from my Mandrake 10 Linux Machine. I am able to ping, traceroute, ssh etc. the linux box from my freeBSD machine however I am not able to ping the gateway. What could be the problem, this is my configuration: FreeBSD: Gateway, IPFW NAT running HOSTNAME=redgate dc0 - 24.199.***.*** [DHCP] txp0 - 192.168.1.1 txp1 - unassigned Mandrake 10: Workstation HOSTNAME=metalgate [EMAIL PROTECTED]:] route Destination Gateway Genmask Interace 192.168.1.0 * 255.255.255.0 eth0 127.0.0.0 * 255.0.0.0 lo0 default 192.168.1.1 0.0.0.0 eth0 [EMAIL PROTECTED]:] ifconfig eth0 eth0 link encap: Ethernet HiWadd:00:0D:87:27:C7:80 inet 192.168.1.3 broadcast 192.168.1.255 mask /24 UP BROADCAST RUNNING MULTICAST MTU 1500 metric 1 [EMAIL PROTECTED]:] ping 192.168.1.1 - - --- redgate ping statistics- 31 packets transmitted, 0 received, 100% packet loss ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBKWuvlT9WV6TztkoRAtH8AJ0UxVGgvYlkUqXJ/fesXeb7VCSQcACfVhIx PRGKj30MfroShbmhCjfhAXo= =idCM -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature
Re: HOWTO Ping LAN???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, Thank you for your replies gentlemen, this post is a bit old, I have already built my FreeBSD NAT box and configured IPFW...I am currently building a new kernel configuration for the machine to include IPDIVERT, IPFIREWALL and a few other system specific modifications. If I have any questions concerning this issue, I will include you both (Eric, Rich) in the list. Thanks Eric Crist wrote: | SEE BOTTOM | |-Original Message- |From: [EMAIL PROTECTED] |[mailto:[EMAIL PROTECTED] On Behalf Of |Rich Shinnick |Sent: Thursday, August 19, 2004 11:46 PM |To: 'Hakim Singhji'; 'Hakim Z. Singhji'; 'MatthewSeaman' |Cc: 'Bill Moran'; [EMAIL PROTECTED] |Subject: RE: HOWTO Ping LAN??? | | |Hakim, | |What you are trying to do is possible in two ways: | |1. SSH to the box, and tunnel to other internal machines |according to the tunnels you have set up. (See the last email |I sent). 2. Port forward connections from the Internet thru |the BSD to internal machines. | |Check these links: http://www.rootprompt.net/freebsd_firewall.html |http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/fire |walls.html | | | _ | |From: Hakim Singhji [mailto:[EMAIL PROTECTED] |Sent: Thursday, July 29, 2004 10:27 AM |To: Hakim Z. Singhji; MatthewSeaman |Cc: Bill Moran; [EMAIL PROTECTED] |Subject: Re: HOWTO Ping LAN??? | | |Hi Matt, | |You say that the only way I will be able to connect to my |network is by tunneling. |This is not what I want to do, I thought I may be able to |SSH, Telnet, www, etc. |from the outside to my default gateway and have the gateway |pass SSH, Telnet, |www., or any other request to the machine on the private |network by including the |localhost.defaultgateway.domain.org or something to that affect. | |Does NAT Overloading only go one way??? | |Hakim Z. Singhji |Coordinating Mgr. / Infection Control |718-245-3923 |[EMAIL PROTECTED] | | |Matthew Seaman [EMAIL PROTECTED] | |7/29/2004 5:32:32 | |AM | | |On Thu, Jul 29, 2004 at 01:40:02AM -0400, Hakim Z. Singhji wrote: | | |Figure 1 | |*** |* Internet * |*24.199.1xx.xx* |*** |~ | |~ | |*** ** |* Defaut GW * __ __ *Kids Machine* |*192.68.0.1 * *192.68.0.3 * |FreeBSD 4.10 * * Mandrake 10* |*** ** |~ | |~ | |* |*Wrk Station1* |*192.68.0.2 * |*Redhat 9 * |* | |This is a rough diagram of the network... I would like to | |ssh, ping, | |etc. the machines behind the default gateway directly (without |tunneling) from the outside the network (at work for | |example). Is this | |possible and if so how do I config. Keep in mind that my default |gateway is FreeBSD. I know this may be a complicated project but if |you could help that would help me greatly. Many thanks to | |everyone in | |advance. | |I'm afraid that's not going to be possible with your current |network layout. If you want all of your machines to be |accessible from the Internet, then you'll need routable |addresses on all of your machines. | |I know you've said you don't want to use tunnelling, but |unfortunately, that's the only way you can access a private |address space as you have from outside it. A relatively |simple way of doing that is to ssh into your gateway box, and |use the '-L' or '-R' portforwarding options to create a |tunnel to one of the internal machines, and then ssh or |otherwise connect through that tunnel: see eg. | | | http://www.linux.ie/articles/tutorials/ssh.php | | One other point: you're going to have problems if you're using | 192.168.0.0 as the IP number on your FreeBSD machine. That's the | *network* address, and shouldn't be applied directly to any specific | machine. If you're running your internal network using 192.168.0.0/24 as | the address space, then you have 254 addresses (from 192.168.0.1 to | 192.168.0.254) to use for client machines, since 192.168.0.0 (network | address) and 192.168.0.255 (broadcast address) are reserved as part of | the networking setup. | | Cheers, | | Matthew | | -- | Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks | Savill Way | PGP: http://www.infracaninophile.co.uk/pgpkey Marlow | Tel: +44 1628 476614 Bucks., SL7 1TH UK | | | Hello, | | There is one real solution to this here. | | You could setup a DMZ to your Default Gateway. If this is a Linksys | Broadband Gateway, it's as simple as checking a box and typing in the | private IP address. This routes all incoming (non-statefull) | connections to this host. Since your IP changes, use a dynamic DNS | service such as no-ip.org(sp?) or tzo.com. I've used TZO.com, | personally, then I just got DSL with a /29 static IP address allocation. | This should work without issue, unless your DMZ firewall rules prevent | it. I would need more information to let you know. | | HTH | | Eric F Crist | Best Access Systems | 11300 Rupp Dr. Burnsville, MN 55337 | Phone: 952.894.3830 | Cell: 612.998.3588 | Fax: 952-894-1990
NAT / ipfw / GW - FreeBSD 4.10 to Linux Private Network???
Hello All, So with the help of all of you I have configure my FreeBSD 4.10 gateway. I am able to ping, tracerout, ssh and call webpages with a fully functioning DHCP client. I thank all of you from the bottom of my heart, those of you that helped me out... its been hardwork and late nights (or early mornings) building these computers from scratch and then introducing them with Linux and FreeBSD OS's which I have only a combined year of experience. With that said I have come to the final component of my network... the NAT component. I was trying to play around with it until I found out that I really didn't know what I was doing... so here I am again. I'm trying to configure one box through NAT via my FreeBSD gateway. I figure after I do it once I'll be able to tweak it for the rest of my machines. This is my set up [internet] - [firewall/gateway] -- [ linux box ] 24.199.105.0-- 192.168.1.1 - 192.168.1.3 ( dc0 ) ( txp0 ) ( eth0 ) I'm trying to get internet connection for my linux box, and I also want all pop3, smtp and http passed to my linux box as well. The freebsd box is setup to be headless once I get this configured properly. In addition I would like SSH2 to be able to tunnel from box to box as well as SSH2 outside my network with my Linux box. I have attached my config files for ipfw.rules, rc.conf, and natd.conf however natd.conf is where I am lost I don't exactly know the rules for natd.conf. I reviewed my resources: The Complete FreeBSD by Greg Lehey and Absolute BSD by Michael Lucas however there was not much on the actual syntax. If someone could help me in these areas it would be greatly appreciated. Thanks in advance... Hakim Z. Singhji New York University 1st year Information Systems Management Student ### # RC.CONF FILE ### Network ## gateway_enable=YES network_interfaces=dc0 txp0 txp1 hostname=redgate.ath.cx ifconfig_dc0=DHCP ifconfig_txp0=inet 192.168.1.1/24 ifconfig_txp1=inet 192.168.1.2/24 natd_enable=dc0 natd_flags=-s -u -f /etc/natd.conf # IPFW firewall_enable=YES firewall_script=/etc/rc.firewall firewall_type=/etc/ipfw.rules firewall_quiet=NO firewall_logging_enable=YES ## Extra Firewalling Options ## log_in_vain=YES tcp_drop_synfin=NO tcp_restrict_rst=YES icmp_drop_redirect=YES MISC RC Rules # ... # IPFW.RULES add 00100 allow ip from any to any via lo0 add 00101 deny ip from any to 127.0.0.0/8 # from man ipfw: allow only tcp connections I've created add 00300 check-state add 00301 deny tcp from any to any in established add 00302 allow tcp from any to any out setup keep-state # allow DNS/UDP Packets add 00400 allow udp from 207.69.188.185 53 to any in recv dc0 add 00401 allow udp from 207.69.188.186 53 to any in recv dc0 add 00402 allow udp from 207.69.188.187 53 to any in recv dc0 add 00403 allow udp from any to any out # allow DHCP add 00500 allow udp from any 68 to 24.29.99.105. 67 out via dc0 add 00501 allow udp from 24.29.99.105 67 to any 68 in via dc0 # uncomment rules 00502 and 00503 if ISP's DHCP server has problems #add 00502 allow udp from any 68 to 255.255.255.255 67 out via dc0 #add 00503 allow udp from any 67 to 255.255.255.255 68 in via dc0 #allow some icmp types (codes not supported) add 00600 allow icmp from any to any icmptypes 3 #allow source quench in and out add 00601 allow icmp from any to any icmptypes 4 #allow me to ping out and receive response back add 00602 allow icmp from any to any icmp types 8 out add 00603 allow icmp from any to any icmptypes 0 in #allow me to run traceroute add 00604 allow icmp from any to any icmptypes 11 in ## # NAT.CONF ## # I'm not at all sure if this is ok for diverting these packets # to my private network machines ip and port numbers??? redirect_port tcp 192.168.1.3:110 110 #pop3 redirect_port udp 192.168.1.3:110 110 #pop3 redirect_port tcp 192.168.1.3:25 25 #smtp redirect_port udp 192.168.1.3:25 25 #smtp redirect_port tcp 192.168.1.3:80 80 #http redirect_port udp 192.168.1.3:80 80 #http smime.p7s Description: S/MIME Cryptographic Signature
Re: DHCP and rc Questions For FreeBSD 4.10???
Bill FreeBSD-Questions, This configuration is not as intuitive as I thought it would be. In /etc/rc.conf I added the following strings: network_interfaces=lo0 dc0 ifconfig_dc0=DHCP Then I deleted the entries in dhclient.conf and relied on the default. I started the daemon by [dhclient dc0] and it seemed to be processing. However, that was all that happened. When I [ifconfig dc0] I get this return: # [EMAIL PROTECTED] ifconfig dc0 dc0 flags = 8843UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST MTU 1500 inet6 fe:80::2c0:f0ff:fe79:4ab7%dc0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 net mask 0xff00 broadcast 255.255.255.255 ether 00:01:02:c3:40:1a media Ethernet auto select (100basefull duplex) status: active ### Then I tried to ping a host... ### [EMAIL PROTECTED] ping www.yahoo.com [EMAIL PROTECTED] ping 24.199.105.1 [EMAIL PROTECTED] ping www.absolutebsd.org Ping: Cannot resolve www.yahoo.com hostname lookup failure, etc. ### However somehow when I run a report the system indicates that UDP packets are being transmitted but the statistics are highly skewed at a rate of 11290 IKPTS : 38 OPKTS I was reading Greg Lehey's book The Complete FreeBSD which happens to have more information on DHCP,DNS, BIND than Absolute BSD by Michael Lucas and Greg says that in order for dhcp to work you must start dhcpd, am I reading this correctly. I assumed that dhcpd would provide DHCP for the private network (in my case), I did not think that my default gateway would rely on dhcpd in order to function. Now I have 2 questions: *must I configure dhcpd now? *must I configure dns (resolv.conf, named, etc.)? *does DHCP rely on the two configurations list above to data? Thank you in advance for your help? HZS -Original Message- From: Hakim Z. Singhji [EMAIL PROTECTED] Sent: Aug 11, 2004 12:32 PM To: Bill Moran [EMAIL PROTECTED] Cc: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Alright, thank you Bill...I will let you know how I fair. Cheers -Original Message- From: Bill Moran [EMAIL PROTECTED] Sent: Aug 11, 2004 9:25 AM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Wrap your likes around 72 characters. All you need in /etc/rc.conf is: network_interfaces=lo0 dc0 ifconfig_dc0=DHCP Everything else you added is just re-affirming the default values. Hakim Z. Singhji [EMAIL PROTECTED] wrote: Hi All, I've been researching this issue although it may be minor I don't like to rely on the [EMAIL PROTECTED] unless I have to. I'm sure you understand...anyway, http:www.freebsddiary.com has a tutorial that with info I could not find in The Complete FreeBSD or Absolute BSD. It described two entries; one in dhclient.conf and the other in rc.conf. See Below: ### dhclient.conf ### interface dc0{ send host-name redgate; request subnet-mask, broadcast-address, routers, domain-name-servers, domain-name, time-servers; require domain-name-servers; ### rc.conf ### ifconfig_dc0=DHCP #IS THIS VARIABLE DECLARATION CASE SENSITIVE??? hostname=redgate ### The question I have now is if this is all I have to do to get dhcp running at startup? I anyone else has any suggestions they are welcome. Unfortunately I cannot test this until the evening so feedback will be very helpful and will save me some time researching. Thanks in advance. -Original Message- From: Hakim Z. Singhji [EMAIL PROTECTED] Sent: Aug 11, 2004 11:24 AM To: [EMAIL PROTECTED] Subject: DHCP and rc Questions For FreeBSD 4.10??? Hi All, I have installed FreeBSD 4.10 to serve as a headless gateway/router/firewall/NAT. The first problem that I have run into can probably be resolved easily. I tried to configure my NIC card via sysinstaller. However, rc.conf does not have a startup variable for dc0. Therefore dhclient is inoperable. I built this box to be headless therefore it is low-tech with no floppy or flash drive and is currently a stand-alone machine so I am not able to copy the rc.conf file to this post. dc0 is working because I can bring its status to active manually: '[EMAIL PROTECTED] ifconfig dc0 ether up'. I was wondering what what variables should be assigned to rc.conf, the related variables I have thus far are: ## ifconfig_dc0=dhcp dhcp_program=/sbin/dhclient dhcp_flags= ## It would be appreciated if someone could attach or copy an rc.conf file for a similar system configuration. Thanks in advance. HZS ___ [EMAIL PROTECTED] mailing
Re: DHCP and rc Questions For FreeBSD 4.10???
Who manages your DHCP server? The config I described has worked in every configuration I've ever dealt with (and that's quite a few) so there is definately something external causing the problem. I have an Earthlink Highspeed Cable account w/ DHCP Server Did you install a packet filter when you set this box up? Yes, however I turned firewall to [firewall_enable=NO] and commented all firewall entries in the rc.conf file. If you don't have a DHCP _server_ on your network, then the DHCP _client_ will not be able to to its job. Earthlink should provide a DHCP server, when I had my standalone redhat box it was configured and I was also receiving DNS as well through earthlink. What do you suggest I do? -Original Message- From: Bill Moran [EMAIL PROTECTED] Sent: Aug 12, 2004 11:45 AM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Hakim Z. Singhji [EMAIL PROTECTED] wrote: Bill FreeBSD-Questions, This configuration is not as intuitive as I thought it would be. In /etc/rc.conf I added the following strings: network_interfaces=lo0 dc0 ifconfig_dc0=DHCP Then I deleted the entries in dhclient.conf and relied on the default. I started the daemon by [dhclient dc0] and it seemed to be processing. However, that was all that happened. When I [ifconfig dc0] I get this return: # [EMAIL PROTECTED] ifconfig dc0 dc0 flags = 8843UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST MTU 1500 inet6 fe:80::2c0:f0ff:fe79:4ab7%dc0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 net mask 0xff00 broadcast 255.255.255.255 ether 00:01:02:c3:40:1a media Ethernet auto select (100basefull duplex) status: active ### Then I tried to ping a host... You've gone too far ... there's not use trying to ping anything if you obviously didn't get a DHCP address. Who manages your DHCP server? The config I described has worked in every configuration I've ever dealt with (and that's quite a few) so there is definately something external causing the problem. Did you install a packet filter when you set this box up? Look through /etc/rc.conf for anything related to firewall. Turn off all firewall rules while you're setting things up. Once it works, you can start turning security stuff like that back on. I was reading Greg Lehey's book The Complete FreeBSD which happens to have more information on DHCP,DNS, BIND than Absolute BSD by Michael Lucas and Greg says that in order for dhcp to work you must start dhcpd, am I reading this correctly. I assumed that dhcpd would provide DHCP for the private network (in my case), I did not think that my default gateway would rely on dhcpd in order to function. DHCP only works if there is a DHCP server. DO NOT run more than 1 DHPC server on a single network or everything is likely to go to hell. Most cheesy internet routers that people buy include a DHCP server. If you provide more information about what your network setup is, we can tell you whether you need a DHCP server or not. But the simple answer is: DHCP won't work unless there is a DHCP server somewhere. Now I have 2 questions: *must I configure dhcpd now? Maybe not. Does the network you're plugging in to require DHCP? *must I configure dns (resolv.conf, named, etc.)? No. If you don't mind using IP addresses for everything. If you want to be able to use hostnames (such as www.yahoo.com) then you need DNS. *does DHCP rely on the two configurations list above to data? Huh? The two lines I provided are enough to configure FreeBSD to be a DHCP _client_. Any additional configuration is just tweaking its behaviour and and is almost never required. If you don't have a DHCP _server_ on your network, then the DHCP _client_ will not be able to to its job. If you have a very small network (how many computers are here anyway?) a DHCP server is probably more work than it's worth. If you are plugged into a larger network (such a the Internet through an ISP) then either a) your ISP's DHCP isn't working right or b) your ISP isn't using DHCP or c) your ISP is doing something to enforce security, such as registering MAC addresses, and you aren't registered correctly or d) something bizaar that I've never seen before. Again, if you could provide some information on how you're trying to set things up, we could provide less general answers. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: DHCP and rc Questions For FreeBSD 4.10???
Hi Bill, What is the output of ipfw show? I dont know that command? Syntax??? # [EMAIL PROTECTED] ipfw show # is that correct? You may do better to set: firewall_enable=YES firewall_type=OPEN Ok I will... I wrote to Earthlink and this is what they had to say: Earthlink: I suggest you reset the cable modem and then try connecting to the net. Earthlink:In order to fix this your cable modem needs to be reset. First shut down your computer and then disconnect the power from the cable modem for 1 to 3 minutes. This will reset the modem. Next, reconnect the power to the cable modem and turn on your computer. If this does not resolve the issue, please let us know so we can dig a little deeper. What do you think of this??? -Original Message- From: Bill Moran [EMAIL PROTECTED] Sent: Aug 12, 2004 12:29 PM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Hakim Z. Singhji [EMAIL PROTECTED] wrote: Who manages your DHCP server? The config I described has worked in every configuration I've ever dealt with (and that's quite a few) so there is definately something external causing the problem. I have an Earthlink Highspeed Cable account w/ DHCP Server Did you install a packet filter when you set this box up? Yes, however I turned firewall to [firewall_enable=NO] and commented all firewall entries in the rc.conf file. What is the output of ipfw show? You may do better to set: firewall_enable=YES firewall_type=OPEN If you don't have a DHCP _server_ on your network, then the DHCP _client_ will not be able to to its job. Earthlink should provide a DHCP server, when I had my standalone redhat box it was configured and I was also receiving DNS as well through earthlink. What do you suggest I do? -Original Message- From: Bill Moran [EMAIL PROTECTED] Sent: Aug 12, 2004 11:45 AM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Hakim Z. Singhji [EMAIL PROTECTED] wrote: Bill FreeBSD-Questions, This configuration is not as intuitive as I thought it would be. In /etc/rc.conf I added the following strings: network_interfaces=lo0 dc0 ifconfig_dc0=DHCP Then I deleted the entries in dhclient.conf and relied on the default. I started the daemon by [dhclient dc0] and it seemed to be processing. However, that was all that happened. When I [ifconfig dc0] I get this return: # [EMAIL PROTECTED] ifconfig dc0 dc0 flags = 8843UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST MTU 1500 inet6 fe:80::2c0:f0ff:fe79:4ab7%dc0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 net mask 0xff00 broadcast 255.255.255.255 ether 00:01:02:c3:40:1a media Ethernet auto select (100basefull duplex) status: active ### Then I tried to ping a host... You've gone too far ... there's not use trying to ping anything if you obviously didn't get a DHCP address. Who manages your DHCP server? The config I described has worked in every configuration I've ever dealt with (and that's quite a few) so there is definately something external causing the problem. Did you install a packet filter when you set this box up? Look through /etc/rc.conf for anything related to firewall. Turn off all firewall rules while you're setting things up. Once it works, you can start turning security stuff like that back on. I was reading Greg Lehey's book The Complete FreeBSD which happens to have more information on DHCP,DNS, BIND than Absolute BSD by Michael Lucas and Greg says that in order for dhcp to work you must start dhcpd, am I reading this correctly. I assumed that dhcpd would provide DHCP for the private network (in my case), I did not think that my default gateway would rely on dhcpd in order to function. DHCP only works if there is a DHCP server. DO NOT run more than 1 DHPC server on a single network or everything is likely to go to hell. Most cheesy internet routers that people buy include a DHCP server. If you provide more information about what your network setup is, we can tell you whether you need a DHCP server or not. But the simple answer is: DHCP won't work unless there is a DHCP server somewhere. Now I have 2 questions: *must I configure dhcpd now? Maybe not. Does the network you're plugging in to require DHCP? *must I configure dns (resolv.conf, named, etc.)? No. If you don't mind using IP addresses for everything. If you want to be able to use hostnames (such as www.yahoo.com) then you need DNS. *does DHCP rely on the two configurations list above to data? Huh? The two lines I provided are enough to configure FreeBSD to be a DHCP _client_. Any additional configuration is just
Re: DHCP and rc Questions For FreeBSD 4.10???
You must really like the # symbol. Actually what I realized is that these posts end up on google searches and all sorts of places all across the web. Since people maybe referencing these threads to help solve their problems I take little extra time to make sure that my posts are legible reads as well as I can make at the time and organized in a way to use at your terminal if necessary. Have you tested basic network connectivity? I installed FreeBSD on Tuesday Night and on monday I had Redhat running perfectly fine on the same network connection and cable. I reduced it either to ipfiltering or cable modem (both likely candidates). Do you get all the proper lights on both your NIC and the cable modem? Yes on dc0 I do, however I not familiar with the other two 3COM XL txp0, txp1. But I'm trying to connect to dc0. -Original Message- From: Bill Moran [EMAIL PROTECTED] Sent: Aug 12, 2004 10:21 AM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Hakim Z. Singhji [EMAIL PROTECTED] wrote: Hi Bill, What is the output of ipfw show? I dont know that command? Syntax??? # [EMAIL PROTECTED] ipfw show # You must really like the # symbol. is that correct? Yes, that's all you have to do. Look at the rules that come back to see what your current ruleset is. You may do better to set: firewall_enable=YES firewall_type=OPEN Ok I will... I wrote to Earthlink and this is what they had to say: Earthlink: I suggest you reset the cable modem and then try connecting to the net. Earthlink:In order to fix this your cable modem needs to be reset. First shut down your computer and then disconnect the power from the cable modem for 1 to 3 minutes. This will reset the modem. Next, reconnect the power to the cable modem and turn on your computer. If this does not resolve the issue, please let us know so we can dig a little deeper. What do you think of this??? I'll bet any amount of small pocket change that it's a scripted answer they give out the first time you ask a question. Have you done it? Cable modems can be flakey, and resetting them is occasionally required. Have you tested basic network connectivity? Do you get all the proper lights on both your NIC and the cable modem? If there are cable problems, you're going to waste a lot of time trying to fix DHCP problems! -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Monitor Resolution???
Thank you oliver!!! -Original Message- From: Oliver Fuchs [EMAIL PROTECTED] Sent: Aug 11, 2004 1:06 AM To: [EMAIL PROTECTED] Subject: Re: Monitor Resolution??? On Tue, 10 Aug 2004, Hakim Z. Singhji wrote: Hello All, I have a question that may be trivial to most however, I don't seem to know how to modify my monitor resolution. I am using FreeBSD without X windows install. Text only and the font and overall resolution is 'HUGE'. I recently installed 4.10 (last night) but I don't know where I went wrong with this? Thanks in advance for your help. An acceptable resolution is VESA_800x600 (I do not think that the kernel can do more at the moment?). To enable it you have to recompile your kernel with option SC_PIXEL_MODE enabled (so you can use the raster text mode). Then load the vesa support with kldload vesa and try vidconrtol -g 100x37 VESA_800x600. If it is o.k. for you put in your /etc/rc.conf file: allscreens_flags=-g 100x37 VESA_800x600 and add to /boot/loader.conf: vesa_load=YES to load the vesa module at startup. Oliver -- ... don't touch the bang bang fruit ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
DHCP and rc Questions For FreeBSD 4.10???
Hi All, I have installed FreeBSD 4.10 to serve as a headless gateway/router/firewall/NAT. The first problem that I have run into can probably be resolved easily. I tried to configure my NIC card via sysinstaller. However, rc.conf does not have a startup variable for dc0. Therefore dhclient is inoperable. I built this box to be headless therefore it is low-tech with no floppy or flash drive and is currently a stand-alone machine so I am not able to copy the rc.conf file to this post. dc0 is working because I can bring its status to active manually: '[EMAIL PROTECTED] ifconfig dc0 ether up'. I was wondering what what variables should be assigned to rc.conf, the related variables I have thus far are: ## ifconfig_dc0=dhcp dhcp_program=/sbin/dhclient dhcp_flags= ## It would be appreciated if someone could attach or copy an rc.conf file for a similar system configuration. Thanks in advance. HZS ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: DHCP and rc Questions For FreeBSD 4.10???
Hi All, I've been researching this issue although it may be minor I don't like to rely on the [EMAIL PROTECTED] unless I have to. I'm sure you understand...anyway, http:www.freebsddiary.com has a tutorial that with info I could not find in The Complete FreeBSD or Absolute BSD. It described two entries; one in dhclient.conf and the other in rc.conf. See Below: ### dhclient.conf ### interface dc0{ send host-name redgate; request subnet-mask, broadcast-address, routers, domain-name-servers, domain-name, time-servers; require domain-name-servers; ### rc.conf ### ifconfig_dc0=DHCP #IS THIS VARIABLE DECLARATION CASE SENSITIVE??? hostname=redgate ### The question I have now is if this is all I have to do to get dhcp running at startup? I anyone else has any suggestions they are welcome. Unfortunately I cannot test this until the evening so feedback will be very helpful and will save me some time researching. Thanks in advance. -Original Message- From: Hakim Z. Singhji [EMAIL PROTECTED] Sent: Aug 11, 2004 11:24 AM To: [EMAIL PROTECTED] Subject: DHCP and rc Questions For FreeBSD 4.10??? Hi All, I have installed FreeBSD 4.10 to serve as a headless gateway/router/firewall/NAT. The first problem that I have run into can probably be resolved easily. I tried to configure my NIC card via sysinstaller. However, rc.conf does not have a startup variable for dc0. Therefore dhclient is inoperable. I built this box to be headless therefore it is low-tech with no floppy or flash drive and is currently a stand-alone machine so I am not able to copy the rc.conf file to this post. dc0 is working because I can bring its status to active manually: '[EMAIL PROTECTED] ifconfig dc0 ether up'. I was wondering what what variables should be assigned to rc.conf, the related variables I have thus far are: ## ifconfig_dc0=dhcp dhcp_program=/sbin/dhclient dhcp_flags= ## It would be appreciated if someone could attach or copy an rc.conf file for a similar system configuration. Thanks in advance. HZS ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: DHCP and rc Questions For FreeBSD 4.10???
Alright, thank you Bill...I will let you know how I fair. Cheers -Original Message- From: Bill Moran [EMAIL PROTECTED] Sent: Aug 11, 2004 9:25 AM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: DHCP and rc Questions For FreeBSD 4.10??? Wrap your likes around 72 characters. All you need in /etc/rc.conf is: network_interfaces=lo0 dc0 ifconfig_dc0=DHCP Everything else you added is just re-affirming the default values. Hakim Z. Singhji [EMAIL PROTECTED] wrote: Hi All, I've been researching this issue although it may be minor I don't like to rely on the [EMAIL PROTECTED] unless I have to. I'm sure you understand...anyway, http:www.freebsddiary.com has a tutorial that with info I could not find in The Complete FreeBSD or Absolute BSD. It described two entries; one in dhclient.conf and the other in rc.conf. See Below: ### dhclient.conf ### interface dc0{ send host-name redgate; request subnet-mask, broadcast-address, routers, domain-name-servers, domain-name, time-servers; require domain-name-servers; ### rc.conf ### ifconfig_dc0=DHCP #IS THIS VARIABLE DECLARATION CASE SENSITIVE??? hostname=redgate ### The question I have now is if this is all I have to do to get dhcp running at startup? I anyone else has any suggestions they are welcome. Unfortunately I cannot test this until the evening so feedback will be very helpful and will save me some time researching. Thanks in advance. -Original Message- From: Hakim Z. Singhji [EMAIL PROTECTED] Sent: Aug 11, 2004 11:24 AM To: [EMAIL PROTECTED] Subject: DHCP and rc Questions For FreeBSD 4.10??? Hi All, I have installed FreeBSD 4.10 to serve as a headless gateway/router/firewall/NAT. The first problem that I have run into can probably be resolved easily. I tried to configure my NIC card via sysinstaller. However, rc.conf does not have a startup variable for dc0. Therefore dhclient is inoperable. I built this box to be headless therefore it is low-tech with no floppy or flash drive and is currently a stand-alone machine so I am not able to copy the rc.conf file to this post. dc0 is working because I can bring its status to active manually: '[EMAIL PROTECTED] ifconfig dc0 ether up'. I was wondering what what variables should be assigned to rc.conf, the related variables I have thus far are: ## ifconfig_dc0=dhcp dhcp_program=/sbin/dhclient dhcp_flags= ## It would be appreciated if someone could attach or copy an rc.conf file for a similar system configuration. Thanks in advance. HZS ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Monitor Resolution???
Hello All, I have a question that may be trivial to most however, I don't seem to know how to modify my monitor resolution. I am using FreeBSD without X windows install. Text only and the font and overall resolution is 'HUGE'. I recently installed 4.10 (last night) but I don't know where I went wrong with this? Thanks in advance for your help. HZS ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Monitor Resolution???
Thanks Matthew... once again :) Cheers -Original Message- From: Matthew Seaman [EMAIL PROTECTED] Sent: Aug 10, 2004 3:52 PM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: Monitor Resolution??? On Tue, Aug 10, 2004 at 03:27:35PM -0400, Hakim Z. Singhji wrote: I have a question that may be trivial to most however, I don't seem to know how to modify my monitor resolution. I am using FreeBSD without X windows install. Text only and the font and overall resolution is 'HUGE'. I recently installed 4.10 (last night) but I don't know where I went wrong with this? Thanks in advance for your help. vidcontrol(1) Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Help Debugging Kshell Script???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 David, I appologize you are correct the script I sent you is a version of the same script that I am working on for an AIX machine. Attached is an unencrypted version of the script for System V: BSD/Linux machines. This is the error it is giving me and I'm not sure why I am getting this error? [EMAIL PROTECTED] sys_admin]$ ./swap_mon.ksh~ \nSwap Space Report for redgate.ath.cx\n Sun Aug 8 00:03:48 EDT 2004 (standard_in) 3: illegal character: O (standard_in) 3: parse error (standard_in) 3: illegal character: O (standard_in) 3: parse error \nTotal Amount of Swap Space:\t494MB Total KB of Swap Space Used:\t23MB Total KB of Swap Space Free:\t471MB \nPercent of Swap Space Used:\t4.6500% \nPercent of Swap Space Free:\t95.3400% \n # I need some help figuring out why bc is giving me such a hard time. I'm almost positive my syntax is correct. This is where I think the problem begins (and possibly ends) in the script: # do # Use the bc utility in a here document to calculate the percentage of # free and used swap space PERCENT_USED=$(bc EOF scale=4 ($SW_USED / $SW_TOTAL) * 100 EOF ) PERCENT_FREE=$(bc EOF scale=4 ($SW_FREE / $SW_TOTAL) * 100 EOF ) ## Thanks for your help in advance. HZS David Fleck wrote: | Unfortunately, I think the script you attached has been mangled in some | way or other; it appears to be missing the end of the 'paging_mon' | function, as well as whatever code invokes that function (and the | swap_mon function as well). If I try to run it, I get: | | dcf$ ./swap_mon.ksh | \nSwap Space Report for grond.sourballs.org\n | Sun Aug 8 07:31:26 CDT 2004 | ./swap_mon.ksh: line 85: funtion: command not found | ./swap_mon.ksh: line 135: syntax error: unexpected end of file | | if I fix the typo (funtion - function) I just get the 'unexpected EOF' | error. | | Both my 4.9 and 5.2.1 systems have /usr/bin/bc, so I assume it is part | of the base install. However, neither system has 'lsps', which appears | to be an AIX command. | | | -- | David Fleck | [EMAIL PROTECTED] | | ___ | [EMAIL PROTECTED] mailing list | http://lists.freebsd.org/mailman/listinfo/freebsd-questions | To unsubscribe, send any mail to | [EMAIL PROTECTED] | -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBFkiclT9WV6TztkoRAngzAJ4jtRcnE5ZkANyZOM9ORxb+scnMNACeJFVf JzNrpFMIjSw0NfpxOgyT13U= =sXLe -END PGP SIGNATURE- ## #! /usr/bin/ksh ### # CREATED_BY: Hakim Z. Singhji ### # SCRIPT: swap_mon.zsh ### # DATE: 8/4/04 ### # VERSION: 0.1 ### # PLATFORM: Linux Only ### # PURPOSE: This shell script is used to produce a report of the system's swap #space statistics including: Total paging space in MB, MB of free #paging space, MB of used pagine space, % of paging space used and #% of paging space free ### # REV LIST: # set -x # Uncomment to debug this shell script # set -n # Uncomment to check command syntax without any execution ### # DEFINE VARIABLES HERE ### THISHOST=$(hostname)# Host name of this machine PC_LIMIT=65 # Upper limit of Swap space percentage before # notification ### # INITIALIZE THE REPORT ### echo \nSwap Space Report for $THISHOST\n date ### # CAPTURE AND PROCESS DATE free -m | grep -i swap | while read junk
Re: Help Debugging Kshell Script???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi David, Your absolutely right, I've been encrypting everything these days and I didn't really think about what it would be like to help me and have to jump through hoops just to see the file... Thanks. David Fleck wrote: | On Fri, 6 Aug 2004, Hakim Z. Singhji wrote: | | You must import my public key to open the attached file. | | | Why? Why not just attach the plain file? | | | -- | David Fleck | [EMAIL PROTECTED] | | -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD4DBQFBFYQrlT9WV6TztkoRAvnkAJY6WeAm+pgtJc9SCQGS8fHt/3mcAKCElJ3t nBkebGIh5g5yFbLXVCglmw== =V05b -END PGP SIGNATURE- ## #! /usr/bin/ksh ### # CREATED_BY: Hakim Z. Singhji ### # SCRIPT: page_swap_mon.zsh ### # DATE: 8/4/04 ### # VERSION: 0.1 ### # PLATFORM: Linux Only ### # PURPOSE: This shell script is used to produce a report of the system's swap #of paging space statistics including: Total paging space in MB, MB #of Free paging space Used, and % of paging space Free. ### # REV LIST: # set -x # Uncomment to debug this shell script # set -n # Uncomment to check command syntax without any execution ### # DEFINE VARIABLES HERE ### THISHOST=$(hostname)# Host name of this machine PC_LIMIT=65 # Upper limit of Swap space percentage before # notification ### # INITIALIZE THE REPORT ### echo \nSwap Space Report for $THISHOST\n date ### # CAPTURE AND PROCESS DATE function swap_mon { free -m | grep -i swap | while read junk SW_TOTAL SW_USED SW_FREE do # Use the bc utility in a here document to calculate the percentage of # free and used swap space PERCENT_USED=$(bc EOF scale=4 ($SW_USED / $SW_TOTAL) * 100 EOF ) PERCENT_FREE=$(bc EOF scale=4 ($SW_FREE / $SW_TOTAL) * 100 EOF ) # Produce the rest of the paging space report: echo \nTotal Amount of Swap Space:\t${SW_TOTAL}MB echo Total KB of Swap Space Used:\t${SW_USED}MB echo Total KB of Swap Space Free:\t${SW_FREE}MB echo \nPercent of Swap Space Used:\t${PERCENT_USED}% echo \nPercent of Swap Space Free:\t${PERCENT_FREE}% # Grab the integer portion of the percent used to test for # the over limit threshold INT_PERCENT_USED=$(echo $PERCENT_USED | cut -d. -f1) if (( PC_LIMIT = INT_PERCENT_USED )) then # Swap space limit has exceeded th threshold, send # notification tput smso # TURN ON REVERSE VIDEO! echo \n\nWARNING: Paging Space has Exceeded the ${PC_LIMIT}% Upper Limit!\n tput rmso # TURN OFF REVERSE VIDEO!! fi done echo \n } ### funtion paging_mon { ### # DEFINE VARIABLES PAGING_STAT=/tmp/paing_stat.out # Paging Stat hold file ### # CAPTURE AND PROCESSING THE DATA # # Load the data in a file without the column headings lsps -s | tail +2 $PAGING_STAT # Start a while loop and feed the loop from
Help Debugging KShell Script???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Everyone, I need some help with this shell script. I originally wrote it in ksh and I not really familiar with bash. However, that is what I'm using at home now and I don't have ksh on any of my machines... Could you folks help me convert this script to bash...I don't think the arithmatic operator bc is a bash option. It appears that is where the first bug is at. Please see the attached (encrypted/compressed) script for any additional details. You must import my public key to open the attached file. ** gpg --decrypt swap_mon.ksh.sig ** Thanks in advance HZS -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBEwwglT9WV6TztkoRAnGcAJ4tVU6pQLp6ZQIBGWcjkTrVsEI6mACfWG9Y AIjZC7q4Doa6440/Gk1YgPI= =Yvuq -END PGP SIGNATURE- -BEGIN PGP MESSAGE- Version: GnuPG v1.2.4 (GNU/Linux) owG9V89v21Qc71ohFAsQEweu3zap1qI1SVEYYLUaTvKyGJI4sp0WRlBx7JfYa/Ic 2c9bC9sdMSFxAYkTB7hw4MqZw06TuHDjH0AcEBfEbpP4PjtO01ZNQWr3pGm1/f31 +Xy/7/NevnxxaWHx6lc3d3a///und6/8+NKvvRfCe9Z4b+Sz/H7oKq9IS9kLXVJ2 GQpRGBR6HitghkyyIF7SxebCZAAVnSgmqe6VP5Chbu17I7idB8NjA/eOdxn5jIqu tk0ZYMrjJynKywNZRYiY8q1CqVAsXTqlO0Q3VK0lQzG/mbn0bO2GYtY0vSlDw2PR AWhseHj5STt6WzMEp6brhRC6dDiE0A68MQd8jkLqAPdhHPhOZFOwIKBjP+Dg94G7 FMLDkNPRtTAeAhABj1Y4ttAj5Bb3Qu7ZIXjMHkYOTqQMps+tIYytAT5NDD0GzfJ1 /Cdi9wNKT4SbNU7N4vLiDzT9sCreHwscG1nMORHvtKFIehkc62QHGqphypJ4CimH jQOALHSY7Y9GlHHBsEN70QA5PdGEqQc75WG71N4H8UKACw8Ztw7gnsddP+KI9xDo AbUj7vlMmozRxYObt6BKamqLwI6iq0q5QQyoE53AvHiSWVeNumaY27k11w85s0Z0 HTJZqOMDiKdk8JCkkWW72HapXdlrqE3V3L7xxmx30aczHtMAht7Ii8fVEBOaNBrf 20iiNaDQo30/wFFDdrLAfO71PdsSnIH0jNlSW6qpKg31NgGzTnBo2ppuzmeL2q4P K10WQzNiaHqyPREU5FIyu2xFcixOnzWiitI2O9hxpVWFtq5ViGHEAn4mKEmK9/3G CO7DAIUGNrxEWO7DPdcbUhQfy4E7EdsHY3fP1EylIf7oGKQq/q/phEiS42M3sfsh jRWqZwPugaHHD4XCWOBSbLfj29F0G1lDOxoiPbH5zGjgzEjpOGUTRRIbLZaTcDpM kpRpE71CWmZcBw5uz97aIlpNyoQYmm6XpMxaLq2yALm08nV4DTaLRSkT265LmaNA AshsoNhfvJzrjwEQd3ui1AJMQMOpUh9TukTEZXRIRygRZGXkR+xot8QjJXd57tM0 6YNmeWXqlfi8Vz5uL5h3UicB+r/41JDd1EcAPebTZe2kK2clmm3Ag9XzHafZZgkX jjGDtwKrF1PmMU4HKCGCK6EIKZOTmOnZyAXLuOEkOLGysbl/d6pC3MWOuP7QEYlU zHticuKqc7MvcfJRwmHDycNGf3PSZK8Pa2uQCh9sbcPJWLAuTDE7myjbjPglpbhW iOeDTakjQLhHpV3H44Y5p7AcYZoVSYEjw8dYYTgKffyI+70FWksceXh3Qu1Xq0Rb TpewTjvTZbuK3lJbt2RoJ6OZ9EYURo4KS6QZOzVB+2B1ousNAWNZSFtaQjBbQq12 Rg1pIX0PlQLPj6mIrly8OpZJQ9sFgySKTnRd06GJKqjcIlDt4FsNjDppNKCitSZ3 TSGUeFY2DXFX+NAV9/h3AuoMhD4lN4LwoxzkC7M/XtDyrDNg4pq3uJu3D7oMTWuB BwpeNeAGFItysSRvloBUTXi9WCzh5+OhZRwXvFttyqij8vSugSOA0SMck/9vf47U lN4uNctoNl9bivNsJrs7jXSOeqzOMZlESkye8eFJ8NDUalBTG3OvTDPxPru59NyC +CGb/sy9uvj8o4VvD159+N0Pj//84umbnd8f/vP4/Zf7n9OFb664T+9+/Ndvf3S3 vn5UX/z5ycrSL9f+BQ== =3pCO -END PGP MESSAGE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Help Debugging Kshell Script???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello Everyone, I need some help with this shell script. I originally wrote it in ksh and I not really familiar with bash. However, that is what I'm using at home now and I don't have ksh on any of my machines... Could you folks help me convert this script to bash...I don't think the arithmatic operator bc is a bash option. It appears that is where the first bug is at. Please see the attached (encrypted/compressed) script for any additional details. You must import my public key to open the attached file. ** gpg --decrypt swap_mon.ksh.sig ** Thanks in advance HZS -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBExinlT9WV6TztkoRAqHMAKCMFthVnjHWNh6aoNZdSBfoOeveLACeLURE n7WTKf5/nFy4e5vdrMN5Pc8= =732m -END PGP SIGNATURE- -BEGIN PGP MESSAGE- Version: GnuPG v1.2.4 (GNU/Linux) owG9V89v21Qc71ohFAsQEweu3zap1qI1SVEYYLUaTvKyGJI4sp0WRlBx7JfYa/Ic 2c9bC9sdMSFxAYkTB7hw4MqZw06TuHDjH0AcEBfEbpP4PjtO01ZNQWr3pGm1/f31 +Xy/7/NevnxxaWHx6lc3d3a///und6/8+NKvvRfCe9Z4b+Sz/H7oKq9IS9kLXVJ2 GQpRGBR6HitghkyyIF7SxebCZAAVnSgmqe6VP5Chbu17I7idB8NjA/eOdxn5jIqu tk0ZYMrjJynKywNZRYiY8q1CqVAsXTqlO0Q3VK0lQzG/mbn0bO2GYtY0vSlDw2PR AWhseHj5STt6WzMEp6brhRC6dDiE0A68MQd8jkLqAPdhHPhOZFOwIKBjP+Dg94G7 FMLDkNPRtTAeAhABj1Y4ttAj5Bb3Qu7ZIXjMHkYOTqQMps+tIYytAT5NDD0GzfJ1 /Cdi9wNKT4SbNU7N4vLiDzT9sCreHwscG1nMORHvtKFIehkc62QHGqphypJ4CimH jQOALHSY7Y9GlHHBsEN70QA5PdGEqQc75WG71N4H8UKACw8Ztw7gnsddP+KI9xDo AbUj7vlMmozRxYObt6BKamqLwI6iq0q5QQyoE53AvHiSWVeNumaY27k11w85s0Z0 HTJZqOMDiKdk8JCkkWW72HapXdlrqE3V3L7xxmx30aczHtMAht7Ii8fVEBOaNBrf 20iiNaDQo30/wFFDdrLAfO71PdsSnIH0jNlSW6qpKg31NgGzTnBo2ppuzmeL2q4P K10WQzNiaHqyPREU5FIyu2xFcixOnzWiitI2O9hxpVWFtq5ViGHEAn4mKEmK9/3G CO7DAIUGNrxEWO7DPdcbUhQfy4E7EdsHY3fP1EylIf7oGKQq/q/phEiS42M3sfsh jRWqZwPugaHHD4XCWOBSbLfj29F0G1lDOxoiPbH5zGjgzEjpOGUTRRIbLZaTcDpM kpRpE71CWmZcBw5uz97aIlpNyoQYmm6XpMxaLq2yALm08nV4DTaLRSkT265LmaNA AshsoNhfvJzrjwEQd3ui1AJMQMOpUh9TukTEZXRIRygRZGXkR+xot8QjJXd57tM0 6YNmeWXqlfi8Vz5uL5h3UicB+r/41JDd1EcAPebTZe2kK2clmm3Ag9XzHafZZgkX jjGDtwKrF1PmMU4HKCGCK6EIKZOTmOnZyAXLuOEkOLGysbl/d6pC3MWOuP7QEYlU zHticuKqc7MvcfJRwmHDycNGf3PSZK8Pa2uQCh9sbcPJWLAuTDE7myjbjPglpbhW iOeDTakjQLhHpV3H44Y5p7AcYZoVSYEjw8dYYTgKffyI+70FWksceXh3Qu1Xq0Rb TpewTjvTZbuK3lJbt2RoJ6OZ9EYURo4KS6QZOzVB+2B1ousNAWNZSFtaQjBbQq12 Rg1pIX0PlQLPj6mIrly8OpZJQ9sFgySKTnRd06GJKqjcIlDt4FsNjDppNKCitSZ3 TSGUeFY2DXFX+NAV9/h3AuoMhD4lN4LwoxzkC7M/XtDyrDNg4pq3uJu3D7oMTWuB BwpeNeAGFItysSRvloBUTXi9WCzh5+OhZRwXvFttyqij8vSugSOA0SMck/9vf47U lN4uNctoNl9bivNsJrs7jXSOeqzOMZlESkye8eFJ8NDUalBTG3OvTDPxPru59NyC +CGb/sy9uvj8o4VvD159+N0Pj//84umbnd8f/vP4/Zf7n9OFb664T+9+/Ndvf3S3 vn5UX/z5ycrSL9f+BQ== =3pCO -END PGP MESSAGE- smime.p7s Description: S/MIME Cryptographic Signature
Questions on IPFW???
Hey guys, Question, when NAT overloading is it possible to use only IPFW rules to pass TCP/UDP packects to remote ip addresses within the network? Or do you have to use natd...because IPFW allows you to execute the following for example: ip from 192.168.99.100 80 to 192.168.99.101 9981 or even in conjunction with a dummynet rule of somesort? Hakim Z. Singhji New York University pub 1024D/A4F3B64A 2004-07-30 Hakim Z. Singhji (NYU) [EMAIL PROTECTED] Key fingerprint = 1407 12D9 73F2 5C38 45CE C387 953F 5657 A4F3 B64A ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Questions on IPFW???
Hello Chuck, I was wondering if someone could help me answer some questions I have concerning IPFW vs. natd I am trying to allow my FreeBSD 4.10 gateway to perform port forwarding for SSH, SQL*Net and Webservice (Web not as important yet). I wanted to know if I can use IPFW as opposed to natd to redirect or pass TCP UDP (is ICMP out of the question???) to a remote location. Gateway::192.0.0.1:22 -- remote server 192.0.0.5:22 or 192.0.0.5:9881 for instance. From the configuration of ipfw it appears that it can be done instead of using natd. Any suggestions or corrections of my logic welcome. Thanks in advance. HZS -Original Message- From: Chuck Swiger [EMAIL PROTECTED] Sent: Aug 3, 2004 12:40 PM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: Questions on IPFW??? Hakim Z. Singhji wrote: Question, when NAT overloading is it possible to use only IPFW rules to pass TCP/UDP packects to remote ip addresses within the network? I don't know what NAT overloading means. It is possible to use only IPFW rules to pass TCP UDP packets from one interface to another using the fwd action. However, note that: The fwd action does not change the contents of the packet at all. In particular, the destination address remains unmodified, so packets forwarded to another system will usually be rejected by that system unless there is a matching rule on that system to capture them. For packets forwarded locally, the local address of the socket will be set to the original destination address of the packet. This makes the netstat(1) entry look rather weird but is intended for use with transparent proxy servers. Or do you have to use natd...because IPFW allows you to execute the following for example: ip from 192.168.99.100 80 to 192.168.99.101 9981 That's the body of an IPFW rule which matches packets with those attributes. Without an action (allow, deny, fwd), what you've written isn't a complete rule: it doesn't mean anything by itself. or even in conjunction with a dummynet rule of somesort? Um. Do you understand the question you are asking? I don't-- perhaps try using a complete sentence. Better yet, why don't you tell us what your network looks like and what you want to do. You most likely will receive answers which are more specific and more useful to you... -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Questions on IPFW???
Actually Chuck, You answered my question, I wanted to know which was better to use with port forwarding (ipfw or natd) and based on what you wrote, natd is a better fit due to the fact that I would not have to force the other machine to accept packets redirected from the NAT box using natd. Is that correct??? -Original Message- From: Hakim Z. Singhji [EMAIL PROTECTED] Sent: Aug 3, 2004 12:49 PM To: Chuck Swiger [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: Questions on IPFW??? Hello Chuck, I was wondering if someone could help me answer some questions I have concerning IPFW vs. natd I am trying to allow my FreeBSD 4.10 gateway to perform port forwarding for SSH, SQL*Net and Webservice (Web not as important yet). I wanted to know if I can use IPFW as opposed to natd to redirect or pass TCP UDP (is ICMP out of the question???) to a remote location. Gateway::192.0.0.1:22 -- remote server 192.0.0.5:22 or 192.0.0.5:9881 for instance. From the configuration of ipfw it appears that it can be done instead of using natd. Any suggestions or corrections of my logic welcome. Thanks in advance. HZS -Original Message- From: Chuck Swiger [EMAIL PROTECTED] Sent: Aug 3, 2004 12:40 PM To: Hakim Z. Singhji [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: Questions on IPFW??? Hakim Z. Singhji wrote: Question, when NAT overloading is it possible to use only IPFW rules to pass TCP/UDP packects to remote ip addresses within the network? I don't know what NAT overloading means. It is possible to use only IPFW rules to pass TCP UDP packets from one interface to another using the fwd action. However, note that: The fwd action does not change the contents of the packet at all. In particular, the destination address remains unmodified, so packets forwarded to another system will usually be rejected by that system unless there is a matching rule on that system to capture them. For packets forwarded locally, the local address of the socket will be set to the original destination address of the packet. This makes the netstat(1) entry look rather weird but is intended for use with transparent proxy servers. Or do you have to use natd...because IPFW allows you to execute the following for example: ip from 192.168.99.100 80 to 192.168.99.101 9981 That's the body of an IPFW rule which matches packets with those attributes. Without an action (allow, deny, fwd), what you've written isn't a complete rule: it doesn't mean anything by itself. or even in conjunction with a dummynet rule of somesort? Um. Do you understand the question you are asking? I don't-- perhaps try using a complete sentence. Better yet, why don't you tell us what your network looks like and what you want to do. You most likely will receive answers which are more specific and more useful to you... -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Questions on IPFW???
Thanks buddy...I appreciate it. -Original Message- From: Chuck Swiger [EMAIL PROTECTED] Sent: Aug 3, 2004 1:11 PM To: Hakim Z. Singhji [EMAIL PROTECTED], freebsd Questions [EMAIL PROTECTED] Subject: Re: Questions on IPFW??? Hakim Z. Singhji wrote: You answered my question, I wanted to know which was better to use with port forwarding (ipfw or natd) and based on what you wrote, natd is a better fit due to the fact that I would not have to force the other machine to accept packets redirected from the NAT box using natd. Is that correct??? That's right. Most people want to use NAT, because it lets you set up an internal network without having to specially configure the internal machines. With regard to your other question, if you want an external connection to, say, port 22 to be forwarded to port 22 on some machine on your internal network, use: redirect_port tcp 192.0.0.5:22 22 ...in /etc/natd.conf or your natd_flags in /etc/rc.conf. -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: HOWTO Ping LAN???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Bill, | Do you have _real_ IPs? I have one IP only... |Most people only get one real IP from their ISP, and |then use private IPs (such as 192.168.0.x or 10.0.0.x) for the rest |of their machines. Yes, I have a similar setup for my private network... |If you're doing such, you'll either need exciting nat rules on | the gateway, or some other workaround. Yes this is where I need assistance, I have read quite a bit on NAT however it seems that I am missing something??? With that said, I'll get back to business. I was thinking that NAT would resolve my issue, however only one way. What if I am outside my home-network and I want to SSH one of the machines behind the default gateway. At present it is not possible and I don't know how to make this possible. Figure 1 *** * Internet * *24.199.1xx.xx* *** ~ | ~ | *** ** * Defaut GW * __ __ *Kids Machine* *192.68.0.0 * *192.68.0.3 * ~ FreeBSD 4.10 * * Mandrake 10* *** ** ~ | ~ | *** *Wrk Station 1* *192.68.0.1 * *Redhat 9 * *** This is a rough diagram of the network... I would like to ssh, ping, etc. the machines behind the default gateway directly (without tunneling) from the outside the network (at work for example). Is this possible and if so how do I config. Keep in mind that my default gateway is FreeBSD. I know this may be a complicated project but if you could help that would help me greatly. Many thanks to everyone in advance. HZS Bill Moran wrote: | PLEASE wrap your lines. I'm not interested in fixing obnoxious email formatting | any more. See http://www.lemis.com/questions.html | | Hakim Singhji [EMAIL PROTECTED] wrote: | |Hi All, | |Many of you have seen my posts lately, I'm a noobie to FreeBSD. I'm trying |to configure a home Windows Free home network complete with default |gateway, LAN, Wireless 802.11b and several flavors of Linux/BSD. | |Its a pretty big project for me and is teaching me ALOT. However I have a |test setup and I'm am not able to ping my local machine. I can only ping |my gateway. My local machine is enabled to receive FTP, PING and SSH. In |addition the firewall on my default gateway is also configured to operate |those services. | |I don't know where I''ve gone wrong, my default gateway works fine |however...I cannot find my network from the outside. What is the problem??? | Thanks in advance for all your help. | | | Do you have _real_ IPs? Most people only get one real IP from their ISP, and | then use private IPs (such as 192.168.0.x or 10.0.0.x) for the rest of their | machines. If you're doing such, you'll either need exciting nat rules on | the gateway, or some other workaround. | -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFBCI2xNF6tCt5tOyIRAuioAJwIqSmh060ZCg4j2AB1qyFzbE4/+gCfRwtI 1HdZdh/+e9KVTjaP8tVoZ7s= =ZVbx -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD Gateway???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Olaf Hoyer wrote: | On Sat, 24 Jul 2004, Hakim Z. Singhji wrote: | || || 10/100? There are less Gigabit types that are supported, yet, || but then the reason for that should be pretty obvious. || || Anyway, you generally can't go wrong with 3Com. That said, || I've never had trouble with 3Com, SiS, DEC/Intel, even RealTek || and the onboard VIA/Rhine stuff (drivers, respectively: xl, sis, dc, || rl, vr). || || That covers quite a few chipsets. There are plenty more. The || only problem I have answering your post is that I don't know what's || *not* supported. Also, some users have reported issues with watchdog || timeout errors using 5.X FBSD and one of the drivers mentioned above. || You could probably spot which one on Google ... | | | Hi! | | Well, I personally prefer the Intel Etherexpress in 100MBit Scenarios. | (fxp) | | You also could look at ebay, sometimes they show up in bundles of 5 or | so, and then are below those 30$ list price... | | Or you could have a look at a Znyx or Adaptec or Intel dual/Quad card, I | also noticed some Adaptec quad ones on german ebay recently. | | In Gigabit world, well, Intel or Broadcom (em or bge) cards are nice, | but given the scenario you have, they are overkill and quite costly | compared to some fxp or xl. | | Do _not_ go for Realtek or Via, they impose a far heavier load on the | CPU than Intel or 3COM. | | HTH | Olaf | Hi Olaf, Thanks alot for your help, I found a pretty good deal on a pair 3COM Xl's $10 each...pretty good huh. Hey maybe I could use you as a resource if I have any questions about setting up the Gateway/Router. Thanks again. HZS -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFBBwCrNF6tCt5tOyIRAkr9AJ9dRdcevTSJoVeQLo2sPNFgHPtMigCguZEa ulyosIh6cWZnWogvKTh2cnQ= =9tRi -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD Gateway???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Pavel Duda wrote: | Hakim Z. Singhji wrote: | | Does anyone have any suggestions | on the type of NIC I should use? | | | Almost any normal NIC will be fine. I'm using mostly Realtek-based | (RTL8139) and Intel (8255) cards wo problems. | | ___ | [EMAIL PROTECTED] mailing list | http://lists.freebsd.org/mailman/listinfo/freebsd-newbies | To unsubscribe, send any mail to [EMAIL PROTECTED] Hi Everyone, I would like to thank you for all your help...I found a pair of 3COM XL's for $10 each...I was told that is a steal... so I went for it. Thanks again. Oh, I may need your help once I get started building the box remember I'm originally from Linux World. So this will be a new hack for me. Hope I can look to you guys for help if I get in trouble. HZS -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFBBwNWNF6tCt5tOyIRAuG9AKCKAA/u6WFZDMc0F8lPWjF1Bm6fsgCg43ZZ 4kiTmFl8vATMP//PXnRatpE= =rqv5 -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature
FreeBSD Gateway???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Everyone, I am building a gateway/router from a i386 300Mhz, 32MB RAM, 5GB hda and ~ I need to buy the NIC cards. I wanted to have three interface connection points to my gateway/router. Does anyone have any suggestions on the type of NIC I should use? I would appreciate some help. In addition, I'm new to BSD. I hail from the Redhat world, but I anticipate FreeBSD to be a great addition to my network. HZS -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFBAdyvNF6tCt5tOyIRAqPLAJ9tyc3SbDvsvW6g3xmU3m6qsCf1nwCgt3Kl fnx7NOpoaTrCTF6e5jg1iX4= =agHz -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature
Re: FreeBSD Gateway???
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Kevin D. Kinsey, DaleCo, S.P. wrote: | Hakim Z. Singhji wrote: | | -BEGIN PGP SIGNED MESSAGE- | Hash: SHA1 | | Hi Everyone, | | I am building a gateway/router from a i386 300Mhz, 32MB RAM, 5GB hda and | ~ I need to buy the NIC cards. I wanted to have three interface | connection points to my gateway/router. Does anyone have any suggestions | on the type of NIC I should use? I would appreciate some help. | | In addition, I'm new to BSD. I hail from the Redhat world, but I | anticipate FreeBSD to be a great addition to my network. | | HZS | | | | 10/100? There are less Gigabit types that are supported, yet, | but then the reason for that should be pretty obvious. | | Anyway, you generally can't go wrong with 3Com. That said, | I've never had trouble with 3Com, SiS, DEC/Intel, even RealTek | and the onboard VIA/Rhine stuff (drivers, respectively: xl, sis, dc, | rl, vr). | | That covers quite a few chipsets. There are plenty more. The | only problem I have answering your post is that I don't know what's | *not* supported. Also, some users have reported issues with watchdog | timeout errors using 5.X FBSD and one of the drivers mentioned above. | You could probably spot which one on Google ... | | HTH, | | Kevin Kinsey | ___ | [EMAIL PROTECTED] mailing list | http://lists.freebsd.org/mailman/listinfo/freebsd-newbies | To unsubscribe, send any mail to [EMAIL PROTECTED] | Well Kevin, Do you know where I can get a 3COM or Intel card for a good price??? I tried pricewatch.com however they all seem to be around the same between 29 - 35 dollars. -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFBAeS2NF6tCt5tOyIRAvVcAKDnxH1D1zBKCQUlW2+ehaoqNo5B0wCgn/TB 3m8zLQgRUmCTgb6eIbpVSoQ= =TE8C -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature
Re: getting rid of cron-sendmail messages
2/01/2004 5:05:21 AM, Lowell Gilbert [EMAIL PROTECTED] wrote: After the upgrade I get now 2 messages from sendmail daily when cron runs. What's happened? Also, is there other/better solution? According to periodic.conf(5), daily_status_security_output is only meaningful if daily_status_security_inline is set to ``NO'' it is the default, anyway I found the problem and set: /etc/periodic.conf -- daily_clean_hoststat_enable=NO The /etc/periodic/daily/150.clean-hoststat script has been completely changed in 4.9 and now it calls sendmail. Cheers, Derek ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
getting rid of cron-sendmail messages
How can I get rid of cron-sendmail messages in FreeBSD 4.9? In FreeBSD 4.7 the following worked: /etc/crontab MAILTO= /etc/periodic.conf -- daily_output=/var/log/daily.log daily_status_mailq_enable=NO daily_status_include_submit_mailq=NO daily_status_mail_rejects_enable=NO daily_queuerun_enable=NO daily_submit_queuerun=NO daily_status_security_output=/var/log/daily.log After the upgrade I get now 2 messages from sendmail daily when cron runs. What's happened? Also, is there other/better solution? Thanks, Derek ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
kernel compilation error (emergency)
From: Rodrigo Reis [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: kernel compilation error (emergency) Date: Thu, 26 Sep 2002 06:34:53 -0700 hi, I`m trying to put up ipfw to work in my computer. I followed the directions in placing the lines in the kernel: options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_DEFAULT_TO ACCEPT now i have tried removing or simply commenting the default to accept line, since what i want is to deny all. now when running # make buildkernel (...) i get errors like this: /TMP/ccX10334.s : 2462 : ERROR : subtraction of two symbols in different sections Idle PTD {. data section} - KERNBASE {*UND* section} at file address 1554 this is one of many similar error lines that appear (with some different numbers and file addresses) and at the end I get a : ***Error Code 1 stop in /usr/obj/usr/src/sys/GENERIC. ***Error Code 1 stop in /usr/src. ***Error code 1 stop in /usr/src. please, i looked for this and couldn`t find a solution. i appreciate your help R. House music all night long... http://www.housemusic.com - Express yourself with a super cool email address from BigMailBox.com. Hundreds of choices. It's free! http://www.bigmailbox.com - _ Tenha você também um MSN Hotmail, o maior webmail do mundo: http://www.hotmail.com/br To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message