Re: Change in /etc/rc.conf:ipv6_defaultrouter
,--- Kirk Strauser writes: | On Sunday 29 June 2008, Ashish Shukla आशीष शुक्ल wrote: || I think how without specifying zone index[1] in link-local address || worked, it is probably due to availability of only single inet6 || interface except lo0. | The physical and virtual interfaces on the system are exactly as before. | I'm guessing that my setup worked as a side effect of a now-fixed bug, | probably the same one that was preventing me from using the 2001: | defaultrouter when I first got the system up and running. Did you mean your setup stopped working after you compiled new kernel, hmm...? || Just wanted to confirm, is following command worked ? if possible paste || the output: || || % ping6 fe80::213:10ff:fe79:137a | $ ping6 fe80::213:10ff:fe79:137a | ping6: UDP connect: Network is unreachable Yes, this is the expected behavior. Ashish -- ·-- ·- ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- -- pgpgB8LucLOXT.pgp Description: PGP signature
Re: Change in /etc/rc.conf:ipv6_defaultrouter
On Monday 30 June 2008, Ashish Shukla आशीष शुक्ल wrote: Did you mean your setup stopped working after you compiled new kernel, hmm...? Yes. Unfortunately, I'm not sure exactly when it happened. I saw an article on Slashdot about IPv6, went to look at my maillog to see how much traffic I'd been getting, and found none. So back to my original post: take this as a heads-up. Anyone who had a setup like mine that suddenly stopped working might be able to fix it by updating their defaultrouter. -- Kirk Strauser signature.asc Description: This is a digitally signed message part.
Re: Change in /etc/rc.conf:ipv6_defaultrouter
,--- Kirk Strauser writes: | On Monday 30 June 2008, Ashish Shukla आशीष शुक्ल wrote: || Did you mean your setup stopped working after you compiled new kernel, || hmm...? | Yes. Unfortunately, I'm not sure exactly when it happened. I saw an | article on Slashdot about IPv6, went to look at my maillog to see how much | traffic I'd been getting, and found none. | So back to my original post: take this as a heads-up. Anyone who had a | setup like mine that suddenly stopped working might be able to fix it by | updating their defaultrouter. Okay, thanks for the info. Ashish -- ·-- ·- ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- -- pgpIPIAY2FiM1.pgp Description: PGP signature
Re: Change in /etc/rc.conf:ipv6_defaultrouter
On Sunday 29 June 2008, Ashish Shukla आशीष शुक्ल wrote: I think how without specifying zone index[1] in link-local address worked, it is probably due to availability of only single inet6 interface except lo0. The physical and virtual interfaces on the system are exactly as before. I'm guessing that my setup worked as a side effect of a now-fixed bug, probably the same one that was preventing me from using the 2001: defaultrouter when I first got the system up and running. Just wanted to confirm, is following command worked ? if possible paste the output: % ping6 fe80::213:10ff:fe79:137a $ ping6 fe80::213:10ff:fe79:137a ping6: UDP connect: Network is unreachable This is after rebooting with ipv6_defaultrouter=2001:470:a80a:1::1. -- Kirk Strauser signature.asc Description: This is a digitally signed message part.
Re: Change in /etc/rc.conf:ipv6_defaultrouter
,--- Kirk Strauser writes: | I've been using IPv6 on my FreeBSD-7 host for quite some time. My | IPv6 router is a different machine, so the FreeBSD server is just a | regular host on the network. | This morning I discovered that I couldn't pass packets to hosts | outside my LAN from FreeBSD, although an OS X host on the same LAN had | no problems pinging www.kame.net. | I had this in my /etc/rc.conf: | ipv6_ifconfig_fxp0=2001:470:a80a:1:2d0:b7ff:fe0e:3a4a prefixlen | 64 | ipv6_defaultrouter=fe80::213:10ff:fe79:137a I don't know how is above ipv6_defaultrouter setting is working, since above is a link-local address, and you've not specified any explicit link in above fe80::/10 address. BtW, did you recently changed your configuration ? Is this same setting working since you started using IPv6 on your FreeBSD host, hmm..? | Whenever I'd try to ping6 my local router, I'd get: | ping6: UDP connect: Network is unreachable Are you trying to ping6 a link-local address, without any mention of interface, hmm...? | Also, the routing table seemed a bit screwy and was sending everything | to lo0: | $ netstat -nr -f inet6 | [...] | default fe80::213:10ff:fe79:137a UGS | lo0 | I found two workarounds: | ipv6_defaultrouter=2001:470:a80a:1::1 I think above solution is better. -- ·-- ·- ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- -- pgpr1InEzQQbE.pgp Description: PGP signature
Re: Change in /etc/rc.conf:ipv6_defaultrouter
Ashish Shukla ? wrote: | ipv6_ifconfig_fxp0=2001:470:a80a:1:2d0:b7ff:fe0e:3a4a prefixlen | 64 | ipv6_defaultrouter=fe80::213:10ff:fe79:137a I don't know how is above ipv6_defaultrouter setting is working, since above is a link-local address, and you've not specified any explicit link in above fe80::/10 address. BtW, did you recently changed your configuration ? Is this same setting working since you started using IPv6 on your FreeBSD host, hmm..? That configuration has been working, unchanged, for a few months now. Until recently it used the fxp0 interface, as evidenced by the fact that it actually worked. :-) Are you trying to ping6 a link-local address, without any mention of interface, hmm...? Again, it worked. If it hadn't, I would have kept messing with it until it did. I host web and mail on that host's IPv6 address and was very keen in getting it up and running. I think above solution is better. Perhaps. I'm content with anything that keeps my connectivity up between reboots. -- Kirk Strauser ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Change in /etc/rc.conf:ipv6_defaultrouter
,--- Kirk Strauser writes: | Ashish Shukla ? wrote: || | ipv6_ifconfig_fxp0=2001:470:a80a:1:2d0:b7ff:fe0e:3a4a prefixlen || | 64 || | ipv6_defaultrouter=fe80::213:10ff:fe79:137a || I don't know how is above ipv6_defaultrouter setting is working, since || above is a link-local address, and you've not specified any explicit || link in above fe80::/10 address. BtW, did you recently changed your || configuration ? Is this same setting working since you started using || IPv6 on your FreeBSD host, hmm..? | That configuration has been working, unchanged, for a few months | now. Until recently it used the fxp0 interface, as evidenced by the | fact that it actually worked. :-) || Are you trying to ping6 a link-local address, without any mention of || interface, hmm...? | Again, it worked. If it hadn't, I would have kept messing with it | until it did. I host web and mail on that host's IPv6 address and | was very keen in getting it up and running. I think how without specifying zone index[1] in link-local address worked, it is probably due to availability of only single inet6 interface except lo0. Just wanted to confirm, is following command worked ? if possible paste the output: % ping6 fe80::213:10ff:fe79:137a Reference: [1] - http://en.wikipedia.org/wiki/IPv6#Zone_indices Regards -- ·-- ·- ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- -- pgpA3KJWYxyN6.pgp Description: PGP signature
Change in /etc/rc.conf:ipv6_defaultrouter
I've been using IPv6 on my FreeBSD-7 host for quite some time. My IPv6 router is a different machine, so the FreeBSD server is just a regular host on the network. This morning I discovered that I couldn't pass packets to hosts outside my LAN from FreeBSD, although an OS X host on the same LAN had no problems pinging www.kame.net. I had this in my /etc/rc.conf: ipv6_ifconfig_fxp0=2001:470:a80a:1:2d0:b7ff:fe0e:3a4a prefixlen 64 ipv6_defaultrouter=fe80::213:10ff:fe79:137a Whenever I'd try to ping6 my local router, I'd get: ping6: UDP connect: Network is unreachable Also, the routing table seemed a bit screwy and was sending everything to lo0: $ netstat -nr -f inet6 [...] default fe80::213:10ff:fe79:137a UGSlo0 I found two workarounds: ipv6_defaultrouter=2001:470:a80a:1::1 and ipv6_defaultrouter=fe80::213:10ff:fe79:137a%fxp0 I'm leaning slightly toward the latter, as it still uses the guaranteed-configured link local addresses, but the latter works OK too (although it didn't when I originally configured this many months ago, which is why I was using link local routing in the first place). So, I'm not too sure which is right or wrong, but I definitely know that something has changed recently. Consider this a heads-up if you want. -- Kirk Strauser ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]