Re: DHCP problem.Help please
On Mon, 2008-04-14 at 14:43 +0800, Ruel Luchavez wrote:
> Hello,
>
> I hope some one will me on my problem.
> My friends has and existing DHCP server and squid proxy server running both
> in freebsd.We purchased a new desktop PC, we gave it a permanent IP using
> the DHCP server and we edit the config file in "/usr/local/etc/dhcp.conf" we
> add this at the bottom
>
> host test {
> hardware ethernet 00:1d:27:64:e1:af; [this is the physical address of new
> PC]
> fixed address 192.168.1.16;
> }
>
> But as we "ipconfig" the new PC the IP is still the same?
> Is there something i forgot to configure?
>
> PLEASE HELP here...thanks in adnvanced
So you used dhcp to obtain an ip prior to setting up a fixed address on
the dhcp server? If so you may have to clear your dhclient.leases file-
rename to .old (correct me if theres a better way to do this anyone).
When testing, use dhcpd -d - this will run the dhcp server in the
foreground so you can see any messages realtime which you can then post
here if need be. Also, send the entries in your log files.
Good luck.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Avermedia 507 TV
Hi, All. Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs, but freeze on begin chanel tunin... How to test tuner and drivers works or not. -- With all regards, Victor M. Blood. mailto: [EMAIL PROTECTED] FTN: 2:5024/[EMAIL PROTECTED], ICQ#3567656 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP problem.Help please
How to reload the dhcpd? what would be the command fo it?
Best regards..
On Mon, Apr 14, 2008 at 3:12 PM, Wojciech Puchar <
[EMAIL PROTECTED]> wrote:
> add this at the bottom
> >
> > host test {
> > hardware ethernet 00:1d:27:64:e1:af; [this is the physical address of
> > new
> > PC]
> > fixed address 192.168.1.16;
> > }
> >
> > But as we "ipconfig" the new PC the IP is still the same?
> > Is there something i forgot to configure?
> >
> > PLEASE HELP here...thanks in adnvanced
> >
>
> no idea. try turning off then on network interface in windoze.
>
> did you reloaded dhcpd?
>
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP problem.Help please
How to reload the dhcpd? what would be the command fo it?
/usr/local/etc/rc.d/isc-dhcpd restart
Best regards..
On Mon, Apr 14, 2008 at 3:12 PM, Wojciech Puchar <
[EMAIL PROTECTED]> wrote:
add this at the bottom
host test {
hardware ethernet 00:1d:27:64:e1:af; [this is the physical address of
new
PC]
fixed address 192.168.1.16;
}
But as we "ipconfig" the new PC the IP is still the same?
Is there something i forgot to configure?
PLEASE HELP here...thanks in adnvanced
no idea. try turning off then on network interface in windoze.
did you reloaded dhcpd?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: DHCP problem.Help please
>How to reload the dhcpd? what would be the command fo it? >Best regards.. On the freebsd server use: /usr/local/etc/rc.d/isc-dhcpd restart On a windows box do : Start --> run Type cmd klik ok Then you'll get a dos box ipconfig /release This releases the ip adres ipconfig /renew try to get a new adres. Regards, Johan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Avermedia 507 TV
On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote: > Hi, All. > > Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use > saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs, > but freeze on begin chanel tunin... > > How to test tuner and drivers works or not. > I haven't had success yet- but I have an E506AR. Where did you get the drivers from? I couldn't get access myself. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mousewheel verschwunden
On 14/04/2008, Robert Huff <[EMAIL PROTECTED]> wrote: > Erich Dollansky writes: > > > this is an English speaking list. > > > Says who? > The handbook. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Restart Squid proxy server
Hallo, How to restart the squid proxy server in freebsd? Thanks... ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DHCP problem.Help please
Thanks Johan & Puchar, your advise is very effective. again thank you.. On Mon, Apr 14, 2008 at 3:36 PM, Johan Hendriks <[EMAIL PROTECTED]> wrote: > > > >How to reload the dhcpd? what would be the command fo it? > > >Best regards.. > > On the freebsd server use: > /usr/local/etc/rc.d/isc-dhcpd restart > > On a windows box do : > Start --> run > Type cmd klik ok > > Then you'll get a dos box > ipconfig /release > This releases the ip adres > ipconfig /renew > try to get a new adres. > > Regards, > Johan > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DNS server Problem
-BEGIN PGP SIGNED MESSAGE- Hash: RIPEMD160 Ruel Luchavez wrote: > Hi, > > I have BIND DNS Server in my freebsd, i keep on searching in google on how > to restart it? > is there a command to restart it like the squid and dhcp? or there is no > command for it? That is somewhat different to what you've asked about previously. You don't say if you're running the base system version of BIND or one from ports. In the former case, you can do: /etc/rc.d/named restart In the latter case, that command should still work, but may not depending on how it was all set up. (The bind94 port doesn't come with its own rc script -- I believe the expectation is that you should use the system script by setting variables in /etc/rc.conf appropriately) In either case you should be able to do: rndc reload so long as you've properly set up /etc/namedb/rndc.conf or /etc/namedb/rndc.key Cheers, Matthew - -- Dr Matthew J Seaman MA, D.Phil. Flat 3 7 Priory Courtyard PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW, UK -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.8 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEAREDAAYFAkgDIDUACgkQ3jDkPpsZ+VbMBQCfXxg/zVy3A3WkIFkkCwaaFPBX UDkAoLVno5AyqfbcBqa9lA/J1IJn+2Iv =9bI5 -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Restart Squid proxy server
>Hallo, >How to restart the squid proxy server in freebsd? >Thanks... Use the following command /usr/local/etc/rc.d/squid restart Regards, Johan Hendriks Double L Automatisering ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: DNS server Problem
> I have BIND DNS Server in my freebsd, i keep on searching in google on > how > to restart it? > is there a command to restart it like the squid and dhcp? or there is > no > command for it? You might like to try # rndc reload Cheers > Thanks in advanced.. > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions- > [EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Poweredge 1950 IPMI
> -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Andy > Christianson > Sent: Thursday, April 10, 2008 6:35 AM > To: freebsd-questions@freebsd.org > Subject: Poweredge 1950 IPMI > > > A while back I posted about reading the CPU temperature on a Dell > Poweredge 1950. The proposed solution was to use ipmitool to read the > temperature from the IPMI controller. This gives me a lot of readings, > including ambient temperature, but it does not give me the temperature > of the CPUs. It says disabled for the top four readings, which should be > the CPU readings. > > After doing some research online, I found a possible alternate solution > of using coretemp. There was a thread that said that the Xeon dual-core > CPUs supported that. After checking the output of cpuid, I have > confirmed that these CPUs definitely do not support coretemp. > > Here's the cpuid table (eax in 6 is for thermal monitoring capability > --it's all 0s): > > eax ineax ebx ecx edx > 0006 756e6547 6c65746e 49656e69 > 0001 0f64 04040800 e4bd bfebfbff > 0002 605b5001 007d7040 > 0003 > 0004 > 0005 0040 0040 > 0006 > 8000 8008 > 8001 0001 20100800 > 8002 20202020 20202020 20202020 20202020 > 8003 6e492020 286c6574 58202952 286e6f65 > 8004 20294d54 20555043 30302e33 007a4847 > 8005 > 8006 08006040 > 8007 > 8008 3024 > > Here's the output from ipmitool: > > [EMAIL PROTECTED] /home/achristianson]# ipmitool sdr > Temp | disabled | ns > Temp | disabled | ns > Temp | disabled | ns > Temp | disabled | ns > Ambient Temp | 24 degrees C | ok > CMOS Battery | 0x00 | ok > ROMB Battery | Not Readable | ns > VCORE| 0x01 | ok > VCORE| 0x01 | ok > CPU VTT | 0x01 | ok > 1.5V PG | 0x01 | ok > 1.8V PG | 0x01 | ok > 3.3V PG | 0x01 | ok > 5V PG| 0x01 | ok > 1.5V PXH PG | 0x01 | ok > 5V Riser PG | 0x01 | ok > Backplane PG | 0x01 | ok > Linear PG| 0x01 | ok > 0.9V PG | 0x01 | ok > 0.9V Over Volt | 0x01 | ok > CPU Power Fault | 0x01 | ok > FAN MOD 1A RPM | 7350 RPM | ok > FAN MOD 1B RPM | 7275 RPM | ok > FAN MOD 1C RPM | 4575 RPM | ok > FAN MOD 1D RPM | 4425 RPM | ok > FAN MOD 2A RPM | 7500 RPM | ok > FAN MOD 2B RPM | 7350 RPM | ok > FAN MOD 2C RPM | 4725 RPM | ok > FAN MOD 2D RPM | 4500 RPM | ok > FAN MOD 3A RPM | 7800 RPM | ok > FAN MOD 3B RPM | 7350 RPM | ok > FAN MOD 3C RPM | 4800 RPM | ok > FAN MOD 3D RPM | 4875 RPM | ok > FAN MOD 4A RPM | 7500 RPM | ok > FAN MOD 4B RPM | 7875 RPM | ok > FAN MOD 4C RPM | 4800 RPM | ok > FAN MOD 4D RPM | 4800 RPM | ok > Presence | 0x01 | ok > Presence | 0x01 | ok > Presence | 0x01 | ok > Presence | 0x02 | ok > Presence | 0x01 | ok > Presence | 0x01 | ok > DRAC5 Conn 2 Cbl | Not Readable | ns > PFault Fail Safe | Not Readable | ns > Status | 0x80 | ok > Status | 0x80 | ok > Status | 0x01 | ok > Status | Not Readable | ns > Status | 0x01 | ok > RAC Status | 0x00 | ok > OS Watchdog | 0x00 | ok > SEL | Not Readable | ns > Intrusion| 0x00 | ok > PS Redundancy| Not Readable | ns > Fan Redundancy | 0x01 | ok > CPU Temp Interf | Not Readable | ns > Drive| 0x01 | ok > Cable SAS A | 0x01 | ok > Current 1| disabled | ns > Current 2| disabled | ns > Voltage 1| disabled | ns > Voltage 2| disabled | ns > System Level | disabled | ns > Power Optimized | Not Readable | ns > ECC Corr Err | Not Readable | ns > ECC Uncorr Err | Not Readable | ns > I/O Channel Chk | Not Readable | ns > PCI Parity Err | Not Readable | ns > PCI System Err | Not Readable | ns > SBE Log Disabled | Not Readable
Re: DNS server Problem
On Monday 14 April 2008 11:02:43 Ruel Luchavez wrote: > I have BIND DNS Server in my freebsd, i keep on searching in google on how > to restart it? > is there a command to restart it like the squid and dhcp? or there is no > command for it? If you start reading here: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/system-administration.html It will soon answer your question and you will pick up the basics of FreeBSD administration very quickly. -- Mel Problem with today's modular software: they start with the modules and never get to the software part. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
DNS server Problem
Hi, I have BIND DNS Server in my freebsd, i keep on searching in google on how to restart it? is there a command to restart it like the squid and dhcp? or there is no command for it? Thanks in advanced.. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Interrupt storm with 7.0
lysergius2001 wrote: Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and now have a continuous interrupt storm on IRQ17. This is a shared IRQ for ath0 and echi0. Never saw this on 6.3??? Any suggestions? Just another contribution to the collection of interrupt storms maybe related to ath: Whenever I plug in my ath1 on cardbus0, I get exactly one storm: interrupt storm detected on "irq10:"; throttling interrupt source ath1: mem 0xd022-0xd022 irq 10 at device 0.0 on cardbus0 Anyhow, I am not sure, if it is really ath causing this. During boot, I get one storm, too, that is on irq 10, but my ath0 on pci2 is on irq 9: ath0: mem 0xd020-0xd020 irq 9 at device 4.0 on pci2 [...] interrupt storm detected on "irq10:"; throttling interrupt source I do not get interrupt storms on irq 9 and I have already had that storm before I replaced my minipci iwi0 with ath0: http://lists.freebsd.org/pipermail/freebsd-current/2007-October/078684.html The reply to that posting was that it is probably related to USB: http://lists.freebsd.org/pipermail/freebsd-current/2007-October/078687.html Moreover, I have a bunch of other devices sharing irq 10: vgapci0: port 0x3000-0x30ff mem 0xd800-0xdfff,0xd010-0xd010 irq 10 at device 0.0 on pci1 uhci0: port 0x1800-0x181f irq 10 at device 29.0 on pci0 uhci2: port 0x1840-0x185f irq 10 at device 29.2 on pci0 ehci0: mem 0xd000-0xd3ff irq 10 at device 29.7 on pci0 fwohci0: mem 0xd0218000-0xd02187ff,0xd021-0xd0213fff irq 10 at device 7.0 on pci2 pcm0: port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xdc00-0xddff,0xd800-0xd8ff irq 10 at device 31.5 on pci0 On our problematic irq, we both have got echi0. Thus, the second storm I get upon attaching ath1 might not be directly caused by ath. No suggestions, just more data. Cheers Jan Henrik ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Avermedia 507 TV
On 14.04.2008, Da Rock wrote: > On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote: >> Hi, All. >> >> Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use >> saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs, >> but freeze on begin chanel tunin... >> >> How to test tuner and drivers works or not. >> > I haven't had success yet- but I have an E506AR. Where did you get the > drivers from? I couldn't get access myself. saa_driver included in kbtv distrib, and can be found in inet, driver homepage is broken. I-m install it from port kbtv, the nessasary bsd-patche within distrib tarball -- With all regards, Victor M. Blood. mailto: [EMAIL PROTECTED] FTN: 2:5024/[EMAIL PROTECTED], ICQ#3567656 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Interrupt storm with 7.0
> Subject: Re: Interrupt storm with 7.0 > On Sunday 13 April 2008 14:41:51 lysergius2001 wrote: > > > Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and > > now have a continuous interrupt storm on IRQ17. This is a shared IRQ for > > ath0 and echi0. Never saw this on 6.3??? Any suggestions? > > I've seen something similar on an old dell laptop, on 6.3. It would cause an > interrupt storm when it got disconnected by the hostap for beacon misses. ath > driver as well, not sure what it shared it with. > Unfortunately, I never got around to reporting it and the machine has been > destroyed by little mongrols, I mean the sweet boys. > > I know this doesn't help you, but at least you know that there is 'something' > with the ath driver that can cause interrupt storms. Had the same problem by upgrading from FBSD-6.3 to FBSD-7.0 right up start. I think it got some thing to do with "device cpufreq" and shared IRQ ! I had a IRQ-storm on IRQ-10, but my iwi0 need it. well to solved the problem temporally I did compile my kernel without "device cpufreq" as I had on FBSD-6.3, but the down side is that my 1.8Ghz Laptop will only run very very slow with 0.228Ghz... after that (ONLY on FBSD-7.0) at the end I just removed the other PCMCIA card (a Sierra Wireless) which using IRQ-10 too, but is in no function on FreeBSD any way. after that I compiled the kernel with "device cpufreq" and I'm up o 1.8GHz without IRQ-storm again. I know this is not a finally solution, but I think we have to wait for FBSD-7.1 or higher to brush out all this little faults. I had a similarly problem when I was updating from FBSD-5.4 to FBSD-6.0 with the iwi0 driver, lots of IRQ-storms, had some thing to do with "device cpufreq" and ACPI that time too ! hope this will go away in future. --- Hanno signature.asc Description: PGP signature
Re: Interrupt storm with 7.0
On Monday 14 April 2008 11:36:43 Jan Henrik Sylvester wrote: > lysergius2001 wrote: > > Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and > > now have a continuous interrupt storm on IRQ17. This is a shared IRQ for > > ath0 and echi0. Never saw this on 6.3??? Any suggestions? > > Just another contribution to the collection of interrupt storms maybe > related to ath: > > Whenever I plug in my ath1 on cardbus0, I get exactly one storm: > interrupt storm detected on "irq10:"; throttling interrupt source > > ath1: mem 0xd022-0xd022 irq 10 at device 0.0 on > cardbus0 > > Anyhow, I am not sure, if it is really ath causing this. During boot, I > get one storm, too, that is on irq 10, but my ath0 on pci2 is on irq 9: > > ath0: mem 0xd020-0xd020 irq 9 at device 4.0 on pci2 > [...] > interrupt storm detected on "irq10:"; throttling interrupt source > > I do not get interrupt storms on irq 9 and I have already had that storm > before I replaced my minipci iwi0 with ath0: > > http://lists.freebsd.org/pipermail/freebsd-current/2007-October/078684.html > > The reply to that posting was that it is probably related to USB: > > http://lists.freebsd.org/pipermail/freebsd-current/2007-October/078687.html > > Moreover, I have a bunch of other devices sharing irq 10: > > vgapci0: port 0x3000-0x30ff mem > 0xd800-0xdfff,0xd010-0xd010 irq 10 at device 0.0 on pci1 > uhci0: port 0x1800-0x181f > irq 10 at device 29.0 on pci0 > uhci2: port 0x1840-0x185f > irq 10 at device 29.2 on pci0 > ehci0: mem > 0xd000-0xd3ff irq 10 at device 29.7 on pci0 > fwohci0: mem > 0xd0218000-0xd02187ff,0xd021-0xd0213fff irq 10 at device 7.0 on pci2 > pcm0: port 0x1c00-0x1cff,0x18c0-0x18ff mem > 0xdc00-0xddff,0xd800-0xd8ff irq 10 at device 31.5 on pci0 > > On our problematic irq, we both have got echi0. Thus, the second storm I > get upon attaching ath1 might not be directly caused by ath. > > No suggestions, just more data. I dug through daily security runs and \o/ the machine got rebooted one time, so I got a dmesg: +uhci0: port 0xdce0-0xdcff irq 11 at device 7.2 on pci0 +uhci0: [GIANT-LOCKED] +ath0: mem 0x8800-0x8800 irq 11 at device 0.0 on cardbus0 +ath0: Ethernet address: 00:11:95:69:1d:eb +ath0: mac 7.9 phy 4.5 radio 5.6 Not ehci, but uhci. Still... I can't find if it had cpufreq. The kernel config I still have and it had it compiled in, but it doesn't show in the dmesg. Only power/sleep button, lid switch and thermal zone. A typical storm session looks like this: +ath0: link state changed to DOWN +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +interrupt storm detected on "irq11:"; throttling interrupt source +ath0: link state changed to UP -- Mel Problem with today's modular software: they start with the modules and never get to the software part. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: DNS server Problem
I have BIND DNS Server in my freebsd, i keep on searching in google on how to restart it? /etc/rc.d/named restart is there a command to restart it like the squid and dhcp? or there is no command for it? Thanks in advanced.. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Poweredge 1950 IPMI
On Mon, 2008-04-14 at 02:07 -0700, Ted Mittelstaedt wrote: > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Andy > > Christianson > > Sent: Thursday, April 10, 2008 6:35 AM > > To: freebsd-questions@freebsd.org > > Subject: Poweredge 1950 IPMI > > > > > > A while back I posted about reading the CPU temperature on a Dell > > Poweredge 1950. The proposed solution was to use ipmitool to read the > > temperature from the IPMI controller. This gives me a lot of readings, > > including ambient temperature, but it does not give me the temperature > > of the CPUs. It says disabled for the top four readings, which should be > > the CPU readings. > > > > After doing some research online, I found a possible alternate solution > > of using coretemp. There was a thread that said that the Xeon dual-core > > CPUs supported that. After checking the output of cpuid, I have > > confirmed that these CPUs definitely do not support coretemp. > > > > Here's the cpuid table (eax in 6 is for thermal monitoring capability > > --it's all 0s): > > > > eax ineax ebx ecx edx > > 0006 756e6547 6c65746e 49656e69 > > 0001 0f64 04040800 e4bd bfebfbff > > 0002 605b5001 007d7040 > > 0003 > > 0004 > > 0005 0040 0040 > > 0006 > > 8000 8008 > > 8001 0001 20100800 > > 8002 20202020 20202020 20202020 20202020 > > 8003 6e492020 286c6574 58202952 286e6f65 > > 8004 20294d54 20555043 30302e33 007a4847 > > 8005 > > 8006 08006040 > > 8007 > > 8008 3024 > > > > Here's the output from ipmitool: > > > > [EMAIL PROTECTED] /home/achristianson]# ipmitool sdr > > Temp | disabled | ns > > Temp | disabled | ns > > Temp | disabled | ns > > Temp | disabled | ns > > Ambient Temp | 24 degrees C | ok > > CMOS Battery | 0x00 | ok > > ROMB Battery | Not Readable | ns > > VCORE| 0x01 | ok > > VCORE| 0x01 | ok > > CPU VTT | 0x01 | ok > > 1.5V PG | 0x01 | ok > > 1.8V PG | 0x01 | ok > > 3.3V PG | 0x01 | ok > > 5V PG| 0x01 | ok > > 1.5V PXH PG | 0x01 | ok > > 5V Riser PG | 0x01 | ok > > Backplane PG | 0x01 | ok > > Linear PG| 0x01 | ok > > 0.9V PG | 0x01 | ok > > 0.9V Over Volt | 0x01 | ok > > CPU Power Fault | 0x01 | ok > > FAN MOD 1A RPM | 7350 RPM | ok > > FAN MOD 1B RPM | 7275 RPM | ok > > FAN MOD 1C RPM | 4575 RPM | ok > > FAN MOD 1D RPM | 4425 RPM | ok > > FAN MOD 2A RPM | 7500 RPM | ok > > FAN MOD 2B RPM | 7350 RPM | ok > > FAN MOD 2C RPM | 4725 RPM | ok > > FAN MOD 2D RPM | 4500 RPM | ok > > FAN MOD 3A RPM | 7800 RPM | ok > > FAN MOD 3B RPM | 7350 RPM | ok > > FAN MOD 3C RPM | 4800 RPM | ok > > FAN MOD 3D RPM | 4875 RPM | ok > > FAN MOD 4A RPM | 7500 RPM | ok > > FAN MOD 4B RPM | 7875 RPM | ok > > FAN MOD 4C RPM | 4800 RPM | ok > > FAN MOD 4D RPM | 4800 RPM | ok > > Presence | 0x01 | ok > > Presence | 0x01 | ok > > Presence | 0x01 | ok > > Presence | 0x02 | ok > > Presence | 0x01 | ok > > Presence | 0x01 | ok > > DRAC5 Conn 2 Cbl | Not Readable | ns > > PFault Fail Safe | Not Readable | ns > > Status | 0x80 | ok > > Status | 0x80 | ok > > Status | 0x01 | ok > > Status | Not Readable | ns > > Status | 0x01 | ok > > RAC Status | 0x00 | ok > > OS Watchdog | 0x00 | ok > > SEL | Not Readable | ns > > Intrusion| 0x00 | ok > > PS Redundancy| Not Readable | ns > > Fan Redundancy | 0x01 | ok > > CPU Temp Interf | Not Readable | ns > > Drive| 0x01 | ok > > Cable SAS A | 0x01 | ok > > Current 1| disabled | ns > > Current 2| disabled | ns > > Voltage 1| disabled | ns > > Voltage 2| disabled | ns > > System Level | disabled | ns > > Power Optimized | No
Re: qmail w/ SMTP auth using freebsd port
I used the patches and documents from qmail.jms1.net and built my own qmail, and it works well. I think a port that tracks qmail + jms1's current combined patch set would be well received. BTW, I copied the maintainer of the qmail port on my earlier message, and it eventually bounced: [EMAIL PROTECTED] SMTP error from remote mail server after RCPT TO:<[EMAIL PROTECTED]>: host mx1.freebsd.org [69.147.83.52]: 450 4.7.1 <[EMAIL PROTECTED]>: Recipient address rejected: Service is unavailable: retry timeout exceeded Michael P. Soulier wrote: On 10/04/08 Jeff Dickens said: Is there a document on how to set up SMTP auth using the FreeBSD qmail port? I didn't think qmail supported anything as modern as smtp auth. Most likely the expectation would be to proxy qmail through a tool that performs it for you. Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Slow performance as root over SSH?
Hi all, (This may actually be a question for the dtach people). I've recently been using dtach (basically the detach function of screen) over SSH to instruct my freeBSD machine to perform long tasks even after I disconnect from it. It's worked great: I run SSH and connect to my box, execute dtach to create a new session in which to execute a program, hit ctr-\ to detach the session from the terminal, and then I can close the SSH tunnel. Recently, I figured to do this with portupgrade. Now, I don't allow root login, so I log in as a user in the wheel group and use su. Now, as root, I run: dtach -A portupgrade -a. It starts working, but extremely slowly. For instance, "portsnap fetch update" takes several minutes, whereas it normally is blazing fast when performed locally. I can still detach, exit root, and close the SSH tunnel. I suppose this is probably a dtach performance issue? If anyone has any thoughts, I'd definitely appreciate them. Thanks! Sincerely, -- Ned Ruggeri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Trying to install a wireless broadcom card
Written by Gaëtan Podevijn on 04/13/08 08:14>>
> Hello,
>
> I'm trying to configure my Acer Aspire 5024wmli wireless card (pciconf
> -lv told me device: BCM43XX Broadcom 802.11b/g) but without any success.
>
> I use ndis with windows drivers and it is correctly loaded:
>
> kldstat
>
> Id Refs AddressSize Name
> 1 24 0xc040 906518 kernel
> 22 0xc0d07000 e750 if_ndis.ko
> 33 0xc0d16000 1aa10ndis.ko
> 51 0xc0d94000 1bdc wlan_xauth.ko
> 61 0xc0d96000 2ec0 wlan_acl.ko
> 71 0xc0d99000 6a32cacpi.ko
> 81 0xc44f4000 22000linux.ko
> 91 0xc4699000 62000bcmwl5_sys.ko
> 101 0xc47c9000 21000radeon.ko
> 111 0xc47ea000 f000 drm.ko
>
> and I have a ndis0 interface but when I use this command line: ifconfig
> ndis0 up scan it returns me anything!
>
> Here is my /etc/wpa_supplicant.conf:
>
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=wheel
>
> network={
> ssid="wireless"
> scan_ssid=1
> key_mgmt=NONE
> wep_key0=XXX
> }
>
> and my /etc/rc.conf:
> # -- sysinstall generated deltas -- # Sat Apr 12 18:32:05 2008
> # Created: Sat Apr 12 18:32:05 2008
> # Enable network daemons for user convenience.
> # Please make all changes to this file, not to /etc/defaults/rc.conf.
> # This file now contains just the overrides from /etc/defaults/rc.conf.
> hostname="herlock-bsd"
> keymap="be.iso"
> linux_enable="YES"
> nfs_server_enable="YES"
> rpcbind_enable="YES"
> sshd_enable="YES"
> # -- sysinstall generated deltas -- # Sat Apr 12 17:07:34 2008
> #ifconfig_re0="DHCP"
> hostname="herlock-bsd"
> ifconfig_ndis0="WPA DHCP"
> gnome_enabled="YES"
>
> And it doesn't work...
>
> Can anyone tells me how is it possible to make this card works on
> freebsd ?
>
> Thank you.
>
> Gaëtan.
Make sure the radio is actually turned on for the device. I've had ndis
bite me in the ass before on laptops with Fn-key radio switches; when I
put FreeBSD on, the radio was disabled and the Fn-key apparently
required OS support to work. I beat my head against the wall trying to
get it to associate with an AP to no avail. I've never been sure if
there is a way on these systems to turn the radio on in FreeBSD, I've
always thrown Windows on a spare partition and used it to turn the radio
on. Maybe someone else can be more enlightening on this subject.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Slow performance as root over SSH?
Edward Ruggeri wrote: Hi all, (This may actually be a question for the dtach people). I've recently been using dtach (basically the detach function of screen) over SSH to instruct my freeBSD machine to perform long tasks even after I disconnect from it. It's worked great: I run SSH and connect to my box, execute dtach to create a new session in which to execute a program, hit ctr-\ to detach the session from the terminal, and then I can close the SSH tunnel. Recently, I figured to do this with portupgrade. Now, I don't allow root login, so I log in as a user in the wheel group and use su. Now, as root, I run: dtach -A portupgrade -a. It starts working, but extremely slowly. For instance, "portsnap fetch update" takes several minutes, whereas it normally is blazing fast when performed locally. I can still detach, exit root, and close the SSH tunnel. I suppose this is probably a dtach performance issue? Likely unrelated to either. There is nothing that would make root perform any differently than other users, and dtach only affects the terminal handling and not any other aspect of the system. Kris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: qmail w/ SMTP auth using freebsd port
Jeff Dickens wrote: > I used the patches and documents from qmail.jms1.net and built my own > qmail, and it works well. I think a port that tracks qmail + jms1's > current combined patch set would be well received. > For what is worth the mail/qmail-tls port says it supports smtp-auth. I dont use qmail myself though so I havent tried it. Vince > BTW, I copied the maintainer of the qmail port on my earlier message, > and it eventually bounced: > > [EMAIL PROTECTED] >SMTP error from remote mail server after RCPT TO:<[EMAIL PROTECTED]>: >host mx1.freebsd.org [69.147.83.52]: 450 4.7.1 <[EMAIL PROTECTED]>: >Recipient address rejected: Service is unavailable: >retry timeout exceeded > > > Michael P. Soulier wrote: >> On 10/04/08 Jeff Dickens said: >> >> >>> Is there a document on how to set up SMTP auth using the FreeBSD >>> qmail port? >>> >> >> I didn't think qmail supported anything as modern as smtp auth. Most >> likely >> the expectation would be to proxy qmail through a tool that performs >> it for >> you. >> Mike >> > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Can't log in as root on new 7.0 install
I've recently installed FreeBSD 7.0 on a new server. I seem to be unable to log in as root in any way, and I'm not sure why. Furthermore I'm now physically separate from the machine, and have been relying on a (non-computer-literate) colleague with access to its console server to try and help. After the initial install I (am pretty sure I) was able to log in as root over ssh. However, after a week when the machine was inaccessible for other reasons, I cannot log in as root, only as a normal user. I thought that I had perhaps mis-remembered the root password, so I directed the colleague to log in in single user mode and reset the root password; she was able to do this, and typed "exit" to return the system to multi-user mode and herself at a root prompt. However I was still not able to log in as root, either over ssh, or by logging in as a normal user and then typing "login root" (i.e. it wasn't just something preventing root logins over ssh). I then asked the colleague to add me to the "wheel" group, which she successfully did; I logged out and back in again, determined that I was indeed in this group, and tried to "su -" and got a "su: Sorry" message, with the colleague reporting that a "BAD SU [user] to root on /dev/ttyp0" message had appeared. I'm sort of at a loss for what to do or why this is happening, and am quite eager to control my own machineSuggestions welcome. Thanks very much. Jesse Sheidlower ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Can't log in as root on new 7.0 install
At 09:35 AM 4/14/2008, Jesse Sheidlower wrote: I've recently installed FreeBSD 7.0 on a new server. I seem to be unable to log in as root in any way, and I'm not sure why. Furthermore I'm now physically separate from the machine, and have been relying on a (non-computer-literate) colleague with access to its console server to try and help. After the initial install I (am pretty sure I) was able to log in as root over ssh. However, after a week when the machine was inaccessible for other reasons, I cannot log in as root, only as a normal user. I thought that I had perhaps mis-remembered the root password, so I directed the colleague to log in in single user mode and reset the root password; she was able to do this, and typed "exit" to return the system to multi-user mode and herself at a root prompt. However I was still not able to log in as root, either over ssh, or by logging in as a normal user and then typing "login root" (i.e. it wasn't just something preventing root logins over ssh). I then asked the colleague to add me to the "wheel" group, which she successfully did; I logged out and back in again, determined that I was indeed in this group, and tried to "su -" and got a "su: Sorry" message, with the colleague reporting that a "BAD SU [user] to root on /dev/ttyp0" message had appeared. I'm sort of at a loss for what to do or why this is happening, and am quite eager to control my own machineSuggestions welcome. Thanks very much. Jesse Sheidlower I would have your helper log in as root and reboot the server. This will assure it is in multi-user. You should NOT be able to ssh in as root, unless you've opened up that security hole which is not recommended. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Poweredge 1950 IPMI
On Mon, Apr 14, 2008 at 08:29:43AM -0400, Andy Christianson wrote: > > > So, any ideas on how to read the CPU temperature from this machine? > > > Thanks in advance for any advice. > > > > > > > My experience is that it's more important to be able to read > > fan rpm on the CPU heatsink. If fan rpm is 0, then the fan is > > not cooling the CPU and you will shortly have no CPU. > > > > As long as you have fan RPM on the heatsink above a certain level > > and your internal case temp is below a certain temp, you can easily > > infer the CPU temp - as they say, that's "good enough for government" > > > > Ted > > > > I agree with you that fan RPM is usually the most important thing. The > problem I have is that our server closet is very, very small and the > only ventilation is the removal of one ceiling tile. When I close the > door, the server gets really loud. This is because fan RPMs are running > up above 11,000 RPM when they're normally at 6,000-7,000 RPM. Server cupboards usually have dedicated fans. Why not get one of those? > That was the original motivation to get temperature monitoring working. > We want to know if it's safe to leave the door closed with the fans > screaming away at 11,000+ RPM. The fact that the dans are running at max should tell you something... A quick & dirty solution would be to drill a couple of holes into the door, one near the top, and one near the bottom. Get a couple of 120 mm fans. Put them in holes in the the bottom of the door as an intake fans. Leave the top hole open as an exhaust. Hook the fans up to an old power supply and you're done. Need more cooling? Add more fans. It might be a good idea put some filter material in front of the intake fans, lest you want to breed dust puppies. :-) Roland -- R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) pgpDiPgmK02jq.pgp Description: PGP signature
Re: start up scripts stopped working
On Sun, Apr 13, 2008 at 01:02:45PM -0600, Eric wrote: > hello, > > does anyone know what I can do to fix the following problem? Every time > my FreeBSd 6.2 machine reboots, none of the scripts in the > /usr/local/etc/rc.d directory launch the various programs i have defined > in my rc.conf file. when i added > > rc_info=yes > rc_debug=yes > > to rc.conf i see things getting evaluated, but nothing is launched. this > forces someone to log in locally to the machine and start openssh so i > can get to the box. Are there startup scripts for these things in rc.d? Putting something in rc.conf is only setting a flag or value that scripts read up to see if they should run or not and what values to run with. Nothing actually starts (or shouldn't) from the rc.conf file. jerry > > does anyone know what could be causing this? > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Freebsd 7 release wireless problem
I have Freebsd 7 Release installed on my laptop and the dhcp client works unstably with WIRELESS connection. It does not get ip unless the dhcp server on the router is restarted. I am kind of sure this is the problem with freebsd as I installed ubuntu and windows xp on the same laptop with no problem with dhcp. Any hints to work around this issue? Here is some information System: Dell Inspiron 600m PM 1.5 G. 512m Intel Pro 2100 802.11b. FreeBSD 7 release generic kernel . I have if_ipw_load ="YES" legal.intel_ipw.license_ack=1 in /boot/loader.conf Run "ifconfig ipw0 up scan " gives ipw0: flags=8843 metric 0 mtu 1500 ether xx:xx:xx:xx:xx:xx media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps) status: associated ssid xx channel 5 (2432 Mhz 11b) bssid xx:xx:xx:xx:xx:xx authmode OPEN privacy OFF bmiss 7 scanvalid 60 Free# dhclient ipw0 DHCPDISCOVER on ipw0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on ipw0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on ipw0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on ipw0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on ipw0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on ipw0 to 255.255.255.255 port 67 interval 5 No DHCPOFFERS received. No working leases in persistent database - sleeping. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: start up scripts stopped working
Jerry McAllister wrote: to rc.conf i see things getting evaluated, but nothing is launched. this forces someone to log in locally to the machine and start openssh so i can get to the box. Are there startup scripts for these things in rc.d? Putting something in rc.conf is only setting a flag or value that scripts read up to see if they should run or not and what values to run with. Nothing actually starts (or shouldn't) from the rc.conf file. jerry yes, the files are in the rc.d directory and start up properly when i issue the commands manually (ie #/usr/local/etc/rc.d/dovecot start). ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mousewheel verschwunden
2008/4/14, Seth Brundle <[EMAIL PROTECTED]>: > 2008/4/14, Christian Walther <[EMAIL PROTECTED]>: > > > On 14/04/2008, Robert Huff <[EMAIL PROTECTED]> wrote: > > > Erich Dollansky writes: > > > > > > > this is an English speaking list. > > > > > > > > > Says who? > > > > > > > The handbook. > > > I'm sorry, I ignored the fact that I sent my initial email to the > (int'l, thusly english) mailing list; it was intended to be sent to > the german mailing list. > > Deep apologies & best, > > Ernst (That set aside: I'm deeply impressed by the fact that list members translated my erraneous posting -- this is VERY friendly and shows the BSD communities superiority, if I might say so. Thanks again! :) Ernst ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Can't log in as root on new 7.0 install
On Mon, Apr 14, 2008 at 10:04:21AM -0500, Derek Ragona wrote: > At 09:35 AM 4/14/2008, Jesse Sheidlower wrote: > > >I've recently installed FreeBSD 7.0 on a new server. I seem to > >be unable to log in as root in any way, and I'm not sure why. > >Furthermore I'm now physically separate from the machine, and > >have been relying on a (non-computer-literate) colleague with > >access to its console server to try and help. > > > >After the initial install I (am pretty sure I) was able to log > >in as root over ssh. However, after a week when the machine > >was inaccessible for other reasons, I cannot log in as root, > >only as a normal user. > > > >I thought that I had perhaps mis-remembered the root password, > >so I directed the colleague to log in in single user mode and > >reset the root password; she was able to do this, and typed > >"exit" to return the system to multi-user mode and herself at > >a root prompt. However I was still not able to log in as root, > >either over ssh, or by logging in as a normal user and then > >typing "login root" (i.e. it wasn't just something preventing > >root logins over ssh). > > > >I then asked the colleague to add me to the "wheel" group, > >which she successfully did; I logged out and back in again, > >determined that I was indeed in this group, and tried to "su -" > >and got a "su: Sorry" message, with the colleague reporting > >that a "BAD SU [user] to root on /dev/ttyp0" message had > >appeared. > > > >I'm sort of at a loss for what to do or why this is happening, > >and am quite eager to control my own machineSuggestions > >welcome. > > > >Thanks very much. > > > >Jesse Sheidlower > > I would have your helper log in as root and reboot the server. This will > assure it is in multi-user. > > You should NOT be able to ssh in as root, unless you've opened up that > security hole which is not recommended. My helper did successfully log in as root over the console, and rebooted the server. However, all of my above problems are still the case: I cannot log in as root over ssh (OK, you addressed this), or by logging in as a regular user and doing a "login root"; and I cannot su to root even though I'm in the wheel group. When this is up and running I won't allow root logins at all, but my issue right now is that I'm not at the console and need to actually install things on the machine (sudo, for example...). So aside from being on the console, how _can_ I get this access on the machine? Thanks again. Jesse Sheidlower ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Slow performance as root over SSH?
On Mon, Apr 14, 2008 at 9:29 AM, Kris Kennaway <[EMAIL PROTECTED]> wrote: > > Edward Ruggeri wrote: > > Recently, I figured to do this with portupgrade. Now, I don't allow > > root login, so I log in as a user in the wheel group and use su. Now, > > as root, I run: dtach -A portupgrade -a. It starts working, but > > extremely slowly. For instance, "portsnap fetch update" takes several > > minutes, whereas it normally is blazing fast when performed locally. > > I can still detach, exit root, and close the SSH tunnel. I suppose > > this is probably a dtach performance issue? > > > > Likely unrelated to either. There is nothing that would make root perform > any differently than other users, and dtach only affects the terminal > handling and not any other aspect of the system. > > Kris > Thanks Kris! Well, that's what I would have expected. But then what explains the difference in performance? The only other difference I can imagine is that I am logging in with a wheel account and using su, rather than logging in as root. Being something of a novice still, could that be the issue? Sincerely, -- Ned Ruggeri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mousewheel verschwunden
2008/4/14, Christian Walther <[EMAIL PROTECTED]>: > On 14/04/2008, Robert Huff <[EMAIL PROTECTED]> wrote: > > Erich Dollansky writes: > > > > > this is an English speaking list. > > > > > > Says who? > > > > The handbook. I'm sorry, I ignored the fact that I sent my initial email to the (int'l, thusly english) mailing list; it was intended to be sent to the german mailing list. Deep apologies & best, Ernst ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Slow performance as root over SSH?
Edward Ruggeri wrote: On Mon, Apr 14, 2008 at 9:29 AM, Kris Kennaway <[EMAIL PROTECTED]> wrote: Edward Ruggeri wrote: Recently, I figured to do this with portupgrade. Now, I don't allow root login, so I log in as a user in the wheel group and use su. Now, as root, I run: dtach -A portupgrade -a. It starts working, but extremely slowly. For instance, "portsnap fetch update" takes several minutes, whereas it normally is blazing fast when performed locally. I can still detach, exit root, and close the SSH tunnel. I suppose this is probably a dtach performance issue? Likely unrelated to either. There is nothing that would make root perform any differently than other users, and dtach only affects the terminal handling and not any other aspect of the system. Kris Thanks Kris! Well, that's what I would have expected. But then what explains the difference in performance? The only other difference I can imagine is that I am logging in with a wheel account and using su, rather than logging in as root. Being something of a novice still, could that be the issue? No. Unless dtach is doing something bizarre I cannot think of a reason this would be happening. Kris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Slow performance as root over SSH?
On Mon, Apr 14, 2008 at 12:41 PM, Kris Kennaway <[EMAIL PROTECTED]> wrote: > No. Unless dtach is doing something bizarre I cannot think of a reason > this would be happening. > > Kris Maybe I simply over-sentimentalized the old days of updating the portsdb. Sincerely, -- Ned Ruggeri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Using FreeBSD's make under Linux
Em Dom, 2008-04-13 às 04:14 +0300, Giorgos Keramidas escreveu: > On Sat, 12 Apr 2008 17:20:17 +0200, Michaël Le Barbier <[EMAIL PROTECTED]> > wrote: > > Hi folks, > > > > a few years ago, I tried to use FreeBSD's make under GNU/Linux, and > > thanks to `jpd' on c.u.b.f.misc, I managed to build FreeBSD 4.7's make > > under some GNU/Linux systems. Having a couple makefiles using make's > > features that were introduced after 4.7, I would like to build a more > > up-to-date. there is the bmake... from netbsd... it understands freebsd .mk files comes with a bootstrap.. and after some "configuration" runs very good on linux http://www.morphisms.net/~wkj/software/bmake/index.html ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Can't log in as root on new 7.0 install
On Mon, Apr 14, 2008 at 12:01:22PM -0500, Derek Ragona wrote: > Jesse Sheidlower wrote: > >My helper did successfully log in as root over the console, > >and rebooted the server. However, all of my above problems are > >still the case: I cannot log in as root over ssh (OK, you > >addressed this), or by logging in as a regular user and doing > >a "login root"; and I cannot su to root even though I'm in the > >wheel group. > > > >When this is up and running I won't allow root logins at all, > >but my issue right now is that I'm not at the console and need > >to actually install things on the machine (sudo, for > >example...). So aside from being on the console, how _can_ I > >get this access on the machine? > > > >Thanks again. > > > >Jesse Sheidlower > > Are you logging in as a regular user then trying to su to root? If you > are, what error are you getting? > > When you first login type: > id > and verify you are in the wheel group. I had done this, but I just discovered the problem: I was trying to su to root using the _user's_ password, not the _root_ password. I don't normally use su, I use sudo. But now that I can in fact get to root this way, I'm on my way. Thanks very much. Jesse Sheidlower ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
advanced programming unix environment
I am trying to build the neccesary files for the stevens/rago APUE.2e book on
FreeBSD 7.0
as instructed i get the source from here: http://www.apuebook.com/src.tar.gz
unzip & untar to:
/home/seamus/apue.2e
cd /home/seamus/apue.2e
amend "Make.defines.freebsd" as instructed so:
"WKDIR=/home/seamus/apue.2e"
and then run "make" from this directory.
I get the following error:
+
pracct.c ../lib/libapue.a
pracct.c: In function 'main':
pracct.c:31: error: storage size of 'acdata' isn't known
pracct.c:31: warning: unused variable 'acdata'
*** Error code 1
Stop in /usr/home/seamus/apue.2e/proc.
*** Error code 1
Stop in /usr/home/seamus/apue.2e.
*** Error code 1
Stop in /usr/home/seamus/apue.2e.
+
I would appreciate any help.
+
Make.defines.freebsd
+
# Common make definitions, customized for each platform
# Definitions required in all program directories to compile and link
# C programs using gcc.
WKDIR=/home/seamus/apue.2e
CC=gcc
COMPILE.c=$(CC) $(CFLAGS) $(CPPFLAGS) -c
LINK.c=$(CC) $(CFLAGS) $(CPPFLAGS) $(LDDIR) $(LDFLAGS)
LDDIR=-L../lib
LDLIBS=../lib/libapue.a $(EXTRALIBS)
CFLAGS=-ansi -I$(WKDIR)/include -Wall -DBSD $(EXTRA)
# Our library that almost every program needs.
LIB=../libapue.a
# Common temp files to delete from each directory.
TEMPFILES=core core.* *.o temp.* *.out typescript*
+
pracct.c
+
#include "apue.h"
#include
#ifdef HAS_SA_STAT
#define FMT "%-*.*s e = %6ld, chars = %7ld, stat = %3u: %c %c %c %c\n"
#else
#define FMT "%-*.*s e = %6ld, chars = %7ld, %c %c %c %c\n"
#endif
#ifndef HAS_ACORE
#define ACORE 0
#endif
#ifndef HAS_AXSIG
#define AXSIG 0
#endif
static unsigned long
compt2ulong(comp_t comptime)/* convert comp_t to unsigned long */
{
unsigned longval;
intexp;
val = comptime & 0x1fff;/* 13-bit fraction */
exp = (comptime >> 13) & 7;/* 3-bit exponent (0-7) */
while (exp-- > 0)
val *= 8;
return(val);
}
int
main(int argc, char *argv[])
{
struct acctacdata;
FILE*fp;
if (argc != 2)
err_quit("usage: pracct filename");
if ((fp = fopen(argv[1], "r")) == NULL)
err_sys("can't open %s", argv[1]);
while (fread(&acdata, sizeof(acdata), 1, fp) == 1) {
printf(FMT, (int)sizeof(acdata.ac_comm),
(int)sizeof(acdata.ac_comm), acdata.ac_comm,
compt2ulong(acdata.ac_etime), compt2ulong(acdata.ac_io),
#ifdef HAS_SA_STAT
(unsigned char) acdata.ac_stat,
#endif
acdata.ac_flag & ACORE ? 'D' : ' ',
acdata.ac_flag & AXSIG ? 'X' : ' ',
acdata.ac_flag & AFORK ? 'F' : ' ',
acdata.ac_flag & ASU ? 'S' : ' ');
}
if (ferror(fp))
err_sys("read error");
exit(0);
}
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Can't log in as root on new 7.0 install
On Mon, Apr 14, 2008 at 10:35:03AM -0400, Jesse Sheidlower wrote: > > I've recently installed FreeBSD 7.0 on a new server. I seem to > be unable to log in as root in any way, and I'm not sure why. > Furthermore I'm now physically separate from the machine, and > have been relying on a (non-computer-literate) colleague with > access to its console server to try and help. > > After the initial install I (am pretty sure I) was able to log > in as root over ssh. However, after a week when the machine > was inaccessible for other reasons, I cannot log in as root, > only as a normal user. > > I thought that I had perhaps mis-remembered the root password, > so I directed the colleague to log in in single user mode and > reset the root password; she was able to do this, and typed > "exit" to return the system to multi-user mode and herself at > a root prompt. However I was still not able to log in as root, > either over ssh, or by logging in as a normal user and then > typing "login root" (i.e. it wasn't just something preventing > root logins over ssh). > > I then asked the colleague to add me to the "wheel" group, > which she successfully did; I logged out and back in again, > determined that I was indeed in this group, and tried to "su -" > and got a "su: Sorry" message, with the colleague reporting > that a "BAD SU [user] to root on /dev/ttyp0" message had > appeared. > > I'm sort of at a loss for what to do or why this is happening, > and am quite eager to control my own machineSuggestions > welcome. Well, the two things I would guess are: there is a syntax error in adding your regular id to the wheel group and you are typing in the root password incorrectly. I've never had it fail when I remembered to add my id to wheel and got the root password right. Can your colleague log in with her id and then su to root? I have never used su with the '-' on it, but I presume that should be no problem. jerry > > Thanks very much. > > Jesse Sheidlower > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: start up scripts stopped working
On Sun, Apr 13, 2008 at 07:18:52PM -0600, Eric wrote: > > tomasz dereszynski wrote: > >Eric wrote: > >>hello, > >> > >>does anyone know what I can do to fix the following problem? Every > >>time my FreeBSd 6.2 machine reboots, none of the scripts in the > >>/usr/local/etc/rc.d directory launch the various programs i have > >>defined in my rc.conf file. when i added > >> > >>rc_info=yes > >>rc_debug=yes > >> > >>to rc.conf i see things getting evaluated, but nothing is launched. > >>this forces someone to log in locally to the machine and start > >>openssh so i can get to the box. > >> > >>does anyone know what could be causing this? > >Hi Eric, > > > >can you copy your rc.conf file? > > > >would be easier to say something... > >cheers > > > sure, here it is: > > defaultrouter="192.168.0.1" > hostname="someservername" > ifconfig_xl0="inet 192.168.0.51 netmask 255.255.255.0" > > > #sshd_program=/usr/local/sbin/sshd > #sshd_enable="YES" > # disable built in SSH and enable SSH_portable > sshd_enable="NO" > openssh_enable="YES" > > font8x8="swiss-8x8" > font8x14="NO" > font8x16="swiss-8x16" > > saslauthd_enable=YES > > postgrey_enable="YES" > > sendmail_enable="YES" > sendmail_flags="-bd" > sendmail_outbound_enable="NO" > sendmail_submit_enable="NO" > sendmail_msp_queue_enable="NO" > > clamav_freshclam_enable=YES > clamav_clamd_enable=YES > > amavisd_enable=YES > > dovecot_enable=YES > > apache22_enable=YES > samba_enable=YES > smartd_enable="YES" > > mysql_enable="YES" > > vsftpd_enable="YES" > > denyhosts_enable="YES" > > mailgraph_enable="YES" > > ddclient_enable="YES" > > twdm2_enable="YES" > > kern_securelevel="1" > kern_securelevel_enable="YES" > I spotted a couple of things with your rc.conf that could be causing you trouble: 1) There are a lot of unquoted YES's for enabling services. I don't know if that could screw thing's up but for form's sake, I'd try quoting them and rebooting. 2) You seem to have set your security level quite high. I can't find where they are documented in 6.3 (in 7.0 under security(7)) but it could be worth a try commenting out the securelevel lines and rebooting and then setting your security level through sysctl (I think you can do that). HTH. -- Frank Contact info: http://www.shute.org.uk/misc/contact.html ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Can't log in as root on new 7.0 install
At 11:30 AM 4/14/2008, Jesse Sheidlower wrote: On Mon, Apr 14, 2008 at 10:04:21AM -0500, Derek Ragona wrote: > At 09:35 AM 4/14/2008, Jesse Sheidlower wrote: > > >I've recently installed FreeBSD 7.0 on a new server. I seem to > >be unable to log in as root in any way, and I'm not sure why. > >Furthermore I'm now physically separate from the machine, and > >have been relying on a (non-computer-literate) colleague with > >access to its console server to try and help. > > > >After the initial install I (am pretty sure I) was able to log > >in as root over ssh. However, after a week when the machine > >was inaccessible for other reasons, I cannot log in as root, > >only as a normal user. > > > >I thought that I had perhaps mis-remembered the root password, > >so I directed the colleague to log in in single user mode and > >reset the root password; she was able to do this, and typed > >"exit" to return the system to multi-user mode and herself at > >a root prompt. However I was still not able to log in as root, > >either over ssh, or by logging in as a normal user and then > >typing "login root" (i.e. it wasn't just something preventing > >root logins over ssh). > > > >I then asked the colleague to add me to the "wheel" group, > >which she successfully did; I logged out and back in again, > >determined that I was indeed in this group, and tried to "su -" > >and got a "su: Sorry" message, with the colleague reporting > >that a "BAD SU [user] to root on /dev/ttyp0" message had > >appeared. > > > >I'm sort of at a loss for what to do or why this is happening, > >and am quite eager to control my own machineSuggestions > >welcome. > > > >Thanks very much. > > > >Jesse Sheidlower > > I would have your helper log in as root and reboot the server. This will > assure it is in multi-user. > > You should NOT be able to ssh in as root, unless you've opened up that > security hole which is not recommended. My helper did successfully log in as root over the console, and rebooted the server. However, all of my above problems are still the case: I cannot log in as root over ssh (OK, you addressed this), or by logging in as a regular user and doing a "login root"; and I cannot su to root even though I'm in the wheel group. When this is up and running I won't allow root logins at all, but my issue right now is that I'm not at the console and need to actually install things on the machine (sudo, for example...). So aside from being on the console, how _can_ I get this access on the machine? Thanks again. Jesse Sheidlower Are you logging in as a regular user then trying to su to root? If you are, what error are you getting? When you first login type: id and verify you are in the wheel group. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Renovation Projects
Hello I came across your details and hope you will not see this as junk mail; if so, please do accept my apologies. We at www.uktradestreet.com can offer you a complimentary service in that we have genuine customers - both commercial and domestic who would need your services and as such we would welcome you to register with us for FREE. If you are a customer who needs to have a job undertaken - whether at home or in the office, then likewise you are most welcome to post your job on our site, and honest, reliable and customer recommended Tradespeople/companies, will be happy to give you a Quotation. Why not have a look around, and remember, it is FREE to register ~ and you can tell all your friends and colleagues too! Thanks Michelle T:020 8133 0625 www.uktradestreet.com To unsubscribe please reply with 'unsubscribe' in subject heading ~ but we hope you will sign up first! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Can't log in as root on new 7.0 install
On Mon, Apr 14, 2008 at 01:16:45PM -0400, Jerry McAllister wrote: > > Well, the two things I would guess are: there is a syntax error in > adding your regular id to the wheel group and you are typing in the > root password incorrectly. In ancient times I had IRIX lock out a user because there was a space at the end of their entry in /etc/passwd. Not hardly believing it myself, made a link copy of csh with a space at the end and the user could login. Fixed /etc/passwd, deleted the link, and placed a trouble report with SGI. -- David Kelly N4HHE, [EMAIL PROTECTED] Whom computers would destroy, they must first drive mad. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
yelp won't upgrade properly
Jeremy Messenger <[EMAIL PROTECTED]> wrote: On Sun, 13 Apr 2008 15:56:11 -0500, Dino Vliet wrote: > > > Jeremy Messenger wrote: On Sat, 12 Apr 2008 14:45:47 > -0500, Dino Vliet > wrote: > >> Folks, >> >> I've tried to upgrade my ports and get the following error from >> gnome-applets everytime I do a portupgrade gnome-applets: >> >> ain.c:42: error: structure has no member named `gconf' >> main.c:46: error: structure has no member named `gweather_pref' >> main.c:46: error: structure has no member named `gconf' >> gmake[2]: *** [main.o] Error 1 >> gmake[2]: Leaving directory >> `/usr/ports/x11/gnome-applets/work/gnome-applets-2.22.1/gweather' >> gmake[1]: *** [install-recursive] Error 1 >> gmake[1]: Leaving directory >> `/usr/ports/x11/gnome-applets/work/gnome-applets-2.22.1/gweather' >> gmake: *** [install-recursive] Error 1 >> *** Error code 2 >> >> Stop in /usr/ports/x11/gnome-applets. >> *** Error code 1 >> >> Stop in /usr/ports/x11/gnome-applets. >> *** Error code 1 >> >> Stop in /usr/ports/x11/gnome-applets. >> ** Command failed [exit code 1]: /usr/bin/script -qa >> /tmp/portupgrade.38565.0 env UPGRADE_TOOL=portupgrade >> UPGRADE_PORT=gnome-applets-2.20.1 UPGRADE_PORT_VER=2.20.1 make >> WITH_FAM_SYSTEM=fam reinstall >> ---> Restoring the old version >> >> ** Fix the installation problem and try again. >> [Updating the pkgdb in /var/db/pkg ... - 988 packages >> found (-0 +1) . done] >> ** Listing the failed packages (-:ignored / *:skipped / !:failed) >> ! x11/gnome-applets (gnome-applets-2.20.1) (install error) >> ** Could not clean up temporary directory: Directory not empty - >> /var/tmp/portupgradeOdM6jXk4 >> >> >> I'm seeing this on my AMD64 freebsd 6.3 system. >> >> Does anyone have ideas? > > Did you follow the /usr/ports/UPDATING? > > Cheers, > Mezz > >> Thanks > > Now I did and chek out the mess: > > ** Fix the problem and try again. > ** Listing the failed packages (-:ignored / *:skipped / !:failed) > - graphics/ImageMagick (marked as IGNORE) > - java/diablo-jdk15 (marked as IGNORE) > - japanese/lynx (marked as IGNORE) > - java/jdk15 (marked as IGNORE) > - textproc/p5-Text-ParseWords (port directory error) > - x11-servers/xorg-printserver (marked as IGNORE) > ! devel/ccrtp (ccrtp-1.5.2) (unknown build error) > * devel/libzrtpcpp (libzrtpcpp-0.9.2) > * net/twinkle (twinkle-1.0_4) > * multimedia/libxine (libxine-1.1.7_3) > ! x11/yelp (yelp-2.18.1_1) (linker error) > * finance/gnucash-docs (gnucash-docs-2.2.0) > * finance/gnucash (gnucash-2.2.0) > ! security/seahorse (gnome-keyring-manager-2.20.0) > (configure error) > > What is next? It doesn't show anything. You need to do it again to get actually error. The portupgrade has option to save build log or you can go to each port and do it by hand to get build error log. As for the seahorse part, are you sure you have complete ports tree up to date? The portupgrade is supposed to delete gnome-keyring-manager. If you still have it, remove it by manual and redo it. Cheers, Mezz -- [EMAIL PROTECTED] - [EMAIL PROTECTED] FreeBSD GNOME Team http://www.FreeBSD.org/gnome/ - [EMAIL PROTECTED] Ok thanks for the suggestions, I've started with Yelp but am getting this error when doing a make install distclean. [EMAIL PROTECTED] /usr/ports/x11/yelp]# make install distclean ===> Building for yelp-2.22.1 gmake all-recursive gmake[1]: Entering directory `/usr/ports/x11/yelp/work/yelp-2.22.1' Making all in src gmake[2]: Entering directory `/usr/ports/x11/yelp/work/yelp-2.22.1/src' gmake all-am gmake[3]: Entering directory `/usr/ports/x11/yelp/work/yelp-2.22.1/src' /bin/sh ../libtool --tag=CXX --mode=link c++ -fno-rtti -fshort-wchar -O2 -fno-strict-aliasing -pipe -Wall -Wno-unused -Wno-ctor-dtor-privacy -Wno-non-virtual-dtor -O2 -fno-strict-aliasing -pipe -L/usr/local/lib -o yelp -R/usr/local/lib/firefox yelp-Yelper.o yelp-yelp-base.o yelp-yelp-bookmarks.o yelp-yelp-debug.o yelp-yelp-error.o yelp-yelp-gecko-utils.o yelp-yelp-html.o yelp-yelp-io-channel.o yelp-yelp-settings.o yelp-yelp-utils.o yelp-yelp-window.o yelp-yelp-marshal.o yelp-yelp-main.o yelp-yelp-print.o yelp-yelp-page.o yelp-yelp-transform.o yelp-yelp-gecko-services.o yelp-yelp-document.o yelp-yelp-toc.o yelp-yelp-docbook.o yelp-yelp-db-print.o yelp-yelp-man-parser.o yelp-yelp-man.o yelp-yelp-info.o yelp-yelp-info-parser.o yelp-gtkentryaction.o yelp-yelp-search.o yelp-yelp-search-parser.o -pthread -L/usr/local/lib -lglade-2.0 -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lgnomevfs-2 -lgnomecanvas-2 -lgnome-2 -lpopt -lbonobo-2 -lbonobo-activation -lORBit-2 -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage -lcairo -lpangoft2-1.0 -lpango-1.0 -lfreetype -lfontconfig -lX11 -lXfixes -lgconf-2 -lgthread-2.0 -lgmodule-
Re: port seahorse won't upgrade properly
Jeremy Messenger <[EMAIL PROTECTED]> wrote: On Sun, 13 Apr 2008 15:56:11 -0500, Dino Vliet wrote: > > > Jeremy Messenger wrote: On Sat, 12 Apr 2008 14:45:47 > -0500, Dino Vliet > wrote: > >> Folks, >> >> I've tried to upgrade my ports and get the following error from >> gnome-applets everytime I do a portupgrade gnome-applets: >> >> ain.c:42: error: structure has no member named `gconf' >> main.c:46: error: structure has no member named `gweather_pref' >> main.c:46: error: structure has no member named `gconf' >> gmake[2]: *** [main.o] Error 1 >> gmake[2]: Leaving directory >> `/usr/ports/x11/gnome-applets/work/gnome-applets-2.22.1/gweather' >> gmake[1]: *** [install-recursive] Error 1 >> gmake[1]: Leaving directory >> `/usr/ports/x11/gnome-applets/work/gnome-applets-2.22.1/gweather' >> gmake: *** [install-recursive] Error 1 >> *** Error code 2 >> >> Stop in /usr/ports/x11/gnome-applets. >> *** Error code 1 >> >> Stop in /usr/ports/x11/gnome-applets. >> *** Error code 1 >> >> Stop in /usr/ports/x11/gnome-applets. >> ** Command failed [exit code 1]: /usr/bin/script -qa >> /tmp/portupgrade.38565.0 env UPGRADE_TOOL=portupgrade >> UPGRADE_PORT=gnome-applets-2.20.1 UPGRADE_PORT_VER=2.20.1 make >> WITH_FAM_SYSTEM=fam reinstall >> ---> Restoring the old version >> >> ** Fix the installation problem and try again. >> [Updating the pkgdb in /var/db/pkg ... - 988 packages >> found (-0 +1) . done] >> ** Listing the failed packages (-:ignored / *:skipped / !:failed) >> ! x11/gnome-applets (gnome-applets-2.20.1) (install error) >> ** Could not clean up temporary directory: Directory not empty - >> /var/tmp/portupgradeOdM6jXk4 >> >> >> I'm seeing this on my AMD64 freebsd 6.3 system. >> >> Does anyone have ideas? > > Did you follow the /usr/ports/UPDATING? > > Cheers, > Mezz > >> Thanks > > Now I did and chek out the mess: > > ** Fix the problem and try again. > ** Listing the failed packages (-:ignored / *:skipped / !:failed) > - graphics/ImageMagick (marked as IGNORE) > - java/diablo-jdk15 (marked as IGNORE) > - japanese/lynx (marked as IGNORE) > - java/jdk15 (marked as IGNORE) > - textproc/p5-Text-ParseWords (port directory error) > - x11-servers/xorg-printserver (marked as IGNORE) > ! devel/ccrtp (ccrtp-1.5.2) (unknown build error) > * devel/libzrtpcpp (libzrtpcpp-0.9.2) > * net/twinkle (twinkle-1.0_4) > * multimedia/libxine (libxine-1.1.7_3) > ! x11/yelp (yelp-2.18.1_1) (linker error) > * finance/gnucash-docs (gnucash-docs-2.2.0) > * finance/gnucash (gnucash-2.2.0) > ! security/seahorse (gnome-keyring-manager-2.20.0) > (configure error) > > What is next? It doesn't show anything. You need to do it again to get actually error. The portupgrade has option to save build log or you can go to each port and do it by hand to get build error log. As for the seahorse part, are you sure you have complete ports tree up to date? The portupgrade is supposed to delete gnome-keyring-manager. If you still have it, remove it by manual and redo it. Cheers, Mezz -- [EMAIL PROTECTED] - [EMAIL PROTECTED] FreeBSD GNOME Team http://www.FreeBSD.org/gnome/ - [EMAIL PROTECTED] I've continued with the seahorse problem. In /usr/ports/UPDATING I couldn't find anything regarding seahorse! So I removed gnome-keyring-manager as you suggested. Then I did a portsnap fetch update. I then tried to install seahorse but got the following error: ===> epiphany-2.22.1.1 depends on shared library: ORBit-2.0 - found ===> epiphany-2.22.1.1 depends on shared library: pango-1.0.0 - found ===> Configuring for epiphany-2.22.1.1 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/local/bin/gmkdir -p checking for gawk... gawk checking whether gmake sets $(MAKE)... yes checking how to create a ustar tar archive... gnutar checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... amd64-portbld-freebsd6.3 checking host system type... amd64-portbld-freebsd6.3 checking for style of include used by gmake... GNU checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld op
Re: advanced programming unix environment
On Monday 14 April 2008 18:48:58 Brother Seamus wrote: > I am trying to build the neccesary files for the stevens/rago APUE.2e book > on FreeBSD 7.0 > I get the following error: > + > pracct.c ../lib/libapue.a > pracct.c: In function 'main': > pracct.c:31: error: storage size of 'acdata' isn't known > pracct.c:31: warning: unused variable 'acdata' The legacy struct acct has been renamed to acctv1 and a new one is named acctv2. If you add: typedef struct acctv1 acct_t; After the #include then change the type of acdata to 'acct_t', you'll probably have solved it. But depends a bit on the rest of the library. -- Mel Problem with today's modular software: they start with the modules and never get to the software part. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: advanced programming unix environment
just a note: same source code makes fine on solaris installation.
I would appreciate if somebody else running freebsd 7.0 could download source
and see if it makes fine on their installation.
Steven's "Advance Programming in the Unix Environment" Source code:
http://www.apuebook.com/src.tar.gz
thanks
Date: Mon, 14 Apr 2008 16:48:58 + (GMT)
From: Brother Seamus <[EMAIL PROTECTED]>
Subject: advanced programming unix environment
To: freebsd-questions@freebsd.org
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=utf-8
I am trying to build the neccesary files for the stevens/rago APUE.2e book on
FreeBSD 7.0
as instructed i get the source from here: http://www.apuebook.com/src.tar.gz
unzip & untar to:
/home/seamus/apue.2e
cd /home/seamus/apue.2e
amend "Make.defines.freebsd" as instructed so:
"WKDIR=/home/seamus/apue.2e"
and then run "make" from this directory.
I get the following error:
+
pracct.c ../lib/libapue.a
pracct.c: In function 'main':
pracct.c:31: error: storage size of 'acdata' isn't known
pracct.c:31: warning: unused variable 'acdata'
*** Error code 1
Stop in /usr/home/seamus/apue.2e/proc.
*** Error code 1
Stop in /usr/home/seamus/apue.2e.
*** Error code 1
Stop in /usr/home/seamus/apue.2e.
+
I would appreciate any help.
+
Make.defines.freebsd
+
# Common make definitions, customized for each platform
# Definitions required in all program directories to compile and link
# C programs using gcc.
WKDIR=/home/seamus/apue.2e
CC=gcc
COMPILE.c=$(CC) $(CFLAGS) $(CPPFLAGS) -c
LINK.c=$(CC) $(CFLAGS) $(CPPFLAGS) $(LDDIR) $(LDFLAGS)
LDDIR=-L../lib
LDLIBS=../lib/libapue.a $(EXTRALIBS)
CFLAGS=-ansi -I$(WKDIR)/include -Wall -DBSD $(EXTRA)
# Our library that almost every program needs.
LIB=../libapue.a
# Common temp files to delete from each directory.
TEMPFILES=core core.* *.o temp.* *.out typescript*
+
pracct.c
+
#include "apue.h"
#include
#ifdef HAS_SA_STAT
#define FMT "%-*.*s e = %6ld, chars = %7ld, stat = %3u: %c %c %c %c\n"
#else
#define FMT "%-*.*s e = %6ld, chars = %7ld, %c %c %c %c\n"
#endif
#ifndef HAS_ACORE
#define ACORE 0
#endif
#ifndef HAS_AXSIG
#define AXSIG 0
#endif
static unsigned long
compt2ulong(comp_t comptime)/* convert comp_t to unsigned long */
{
unsigned longval;
intexp;
val = comptime & 0x1fff;/* 13-bit fraction */
exp = (comptime >> 13) & 7;/* 3-bit exponent (0-7) */
while (exp-- > 0)
val *= 8;
return(val);
}
int
main(int argc, char *argv[])
{
struct acctacdata;
FILE*fp;
if (argc != 2)
err_quit("usage: pracct filename");
if ((fp = fopen(argv[1], "r")) == NULL)
err_sys("can't open %s", argv[1]);
while (fread(&acdata, sizeof(acdata), 1, fp) == 1) {
printf(FMT, (int)sizeof(acdata.ac_comm),
(int)sizeof(acdata.ac_comm), acdata.ac_comm,
compt2ulong(acdata.ac_etime), compt2ulong(acdata.ac_io),
#ifdef HAS_SA_STAT
(unsigned char) acdata.ac_stat,
#endif
acdata.ac_flag & ACORE ? 'D' : ' ',
acdata.ac_flag & AXSIG ? 'X' : ' ',
acdata.ac_flag & AFORK ? 'F' : ' ',
acdata.ac_flag & ASU ? 'S' : ' ');
}
if (ferror(fp))
err_sys("read error");
exit(0);
}
--
Message: 23
Date: Mon, 14 Apr 2008 13:16:45 -0400
From: Jerry McAllister <[EMAIL PROTECTED]>
Subject: Re: Can't log in as root on new 7.0 install
To: Jesse Sheidlower <[EMAIL PROTECTED]>
Cc: freebsd-questions@freebsd.org
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=us-ascii
On Mon, Apr 14, 2008 at 10:35:03AM -0400, Jesse Sheidlower wrote:
>
> I've recently installed FreeBSD 7.0 on a new server. I seem to
> be unable to log in as root in any way, and I'm not sure why.
> Furthermore I'm now physically separate from the machine, and
> have been relying on a (non-computer-literate) colleague with
> access to its console server to try and help.
>
> After the initial install I (am pretty sure I) was able to log
> in as root over ssh. However, after a week when the machine
> was inaccessible for other reasons, I cannot log in as root,
> only as a normal user.
>
> I thought that I had perhaps mis-remembered the root password,
> so I directed the colleague to log in in single user mode and
> reset the root password; she was able to do this, and typed
> "exit" to return the system to multi-user mode and herself at
> a root prompt. However I was still not able to log in as root,
> either over ssh, or by logging in as a normal user and then
> typing "login root" (i.e. it wasn't just something preventing
> root logins over ssh).
>
> I then asked the colleague to add me to the "wheel" group,
>
Re: start up scripts stopped working
Frank Shute wrote: I spotted a couple of things with your rc.conf that could be causing you trouble: 1) There are a lot of unquoted YES's for enabling services. I don't know if that could screw thing's up but for form's sake, I'd try quoting them and rebooting. 2) You seem to have set your security level quite high. I can't find where they are documented in 6.3 (in 7.0 under security(7)) but it could be worth a try commenting out the securelevel lines and rebooting and then setting your security level through sysctl (I think you can do that). I will give this a whirl and see how it goes. I have never had issues with the unquoted YES statements unless they are not balanced (i.e. foo_enable=YES" or foo_enable="YES blows up), but I did quote everything to be consistent I commented out the securelevel stuff as well. Thanks for the suggestions. i will report back once i get the box rebooted ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Mousewheel verschwunden
Seth Brundle wrote: (That set aside: I'm deeply impressed by the fact that list members translated my erraneous posting -- this is VERY friendly and shows the BSD communities superiority, if I might say so. Thanks again! :) w00t!! That's Internet for "Thanks, Erich, and I concur with Seth's praise :)" -R ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: yelp won't upgrade properly
On Mon, 14 Apr 2008 13:28:40 -0500, Dino Vliet <[EMAIL PROTECTED]> wrote: Ok thanks for the suggestions, I've started with Yelp but am getting this error when doing a make install distclean. [EMAIL PROTECTED] /usr/ports/x11/yelp]# make install distclean ===> Building for yelp-2.22.1 gmake all-recursive gmake[1]: Entering directory `/usr/ports/x11/yelp/work/yelp-2.22.1' Making all in src gmake[2]: Entering directory `/usr/ports/x11/yelp/work/yelp-2.22.1/src' gmake all-am gmake[3]: Entering directory `/usr/ports/x11/yelp/work/yelp-2.22.1/src' /bin/sh ../libtool --tag=CXX --mode=link c++ -fno-rtti -fshort-wchar -O2 -fno-strict-aliasing -pipe -Wall -Wno-unused -Wno-ctor-dtor-privacy -Wno-non-virtual-dtor -O2 -fno-strict-aliasing -pipe -L/usr/local/lib -o yelp -R/usr/local/lib/firefox yelp-Yelper.o yelp-yelp-base.o yelp-yelp-bookmarks.o yelp-yelp-debug.o yelp-yelp-error.o yelp-yelp-gecko-utils.o yelp-yelp-html.o yelp-yelp-io-channel.o yelp-yelp-settings.o yelp-yelp-utils.o yelp-yelp-window.o yelp-yelp-marshal.o yelp-yelp-main.o yelp-yelp-print.o yelp-yelp-page.o yelp-yelp-transform.o yelp-yelp-gecko-services.o yelp-yelp-document.o yelp-yelp-toc.o yelp-yelp-docbook.o yelp-yelp-db-print.o yelp-yelp-man-parser.o yelp-yelp-man.o yelp-yelp-info.o yelp-yelp-info-parser.o yelp-gtkentryaction.o yelp-yelp-search.o yelp-yelp-search-parser.o -pthread -L/usr/local/lib -lglade-2.0 -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lgnomevfs-2 -lgnomecanvas-2 -lgnome-2 -lpopt -lbonobo-2 -lbonobo-activation -lORBit-2 -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lXext -lXrender -lXinerama -lXi -lXrandr -lXcursor -lXcomposite -lXdamage -lcairo -lpangoft2-1.0 -lpango-1.0 -lfreetype -lfontconfig -lX11 -lXfixes -lgconf-2 -lgthread-2.0 -lgmodule-2.0 -lexslt -lxslt -lz -lm -lgcrypt -lgpg-error -lxml2 -lstartup-notification-1 -ldbus-glib-1 -ldbus-1 -lgobject-2.0 -lglib-2.0 -liconv -lrarian -lz -lbz2 -lSM -lICE -L/usr/local/lib -lX11 -Wl,-rpath,/usr/local/lib/firefox -pthread -L/usr/local/lib/firefox -L/usr/local/lib -lgtkembedmoz -lxpcom -lplds4 -lplc4 -lnspr4 c++ -fno-rtti -fshort-wchar -O2 -fno-strict-aliasing -pipe -Wall -Wno-unused -Wno-ctor-dtor-privacy -Wno-non-virtual-dtor -O2 -fno-strict-aliasing -pipe -o yelp yelp-Yelper.o yelp-yelp-base.o yelp-yelp-bookmarks.o yelp-yelp-debug.o yelp-yelp-error.o yelp-yelp-gecko-utils.o yelp-yelp-html.o yelp-yelp-io-channel.o yelp-yelp-settings.o yelp-yelp-utils.o yelp-yelp-window.o yelp-yelp-marshal.o yelp-yelp-main.o yelp-yelp-print.o yelp-yelp-page.o yelp-yelp-transform.o yelp-yelp-gecko-services.o yelp-yelp-document.o yelp-yelp-toc.o yelp-yelp-docbook.o yelp-yelp-db-print.o yelp-yelp-man-parser.o yelp-yelp-man.o yelp-yelp-info.o yelp-yelp-info-parser.o yelp-gtkentryaction.o yelp-yelp-search.o yelp-yelp-search-parser.o -pthread -Wl,-rpath -Wl,/usr/local/lib/firefox -pthread -L/usr/local/lib /usr/local/lib/libglade-2.0.so /usr/local/lib/libgnomeui-2.so /usr/local/lib/libgio-2.0.so /usr/local/lib/libgnome-keyring.so /usr/local/lib/libjpeg.so /usr/local/lib/libbonoboui-2.so /usr/local/lib/libgnomecanvas-2.so /usr/local/lib/libgailutil.so /usr/local/lib/libpixman-1.so /usr/local/lib/libgnome-2.so /usr/local/lib/libgnomevfs-2.so -lssl -lcrypto -lutil /usr/local/lib/libesd.so -laudiofile /usr/local/lib/libpopt.so /usr/local/lib/libbonobo-2.so /usr/local/lib/libbonobo-activation.so /usr/local/lib/libORBitCosNaming-2.so /usr/local/lib/libart_lgpl_2.so /usr/local/lib/libgtk-x11-2.0.so /usr/local/lib/libgdk-x11-2.0.so /usr/local/lib/libatk-1.0.so /usr/local/lib/libgdk_pixbuf-2.0.so /usr/local/lib/libpangocairo-1.0.so /usr/local/lib/libXinerama.so /usr/local/lib/libXi.so /usr/local/lib/libXrandr.so /usr/local/lib/libXcursor.so /usr/local/lib/libXcomposite.so /usr/local/lib/libXext.so /usr/local/lib/libXdamage.so /usr/local/lib/libcairo.so /usr/local/lib/libglitz.so -lpng /usr/local/lib/libXrender.so /usr/local/lib/libpangoft2-1.0.so /usr/local/lib/libpango-1.0.so /usr/local/lib/libfontconfig.so /usr/local/lib/libfreetype.so /usr/local/lib/libexpat.so /usr/local/lib/libXfixes.so /usr/local/lib/libgconf-2.so /usr/local/lib/libORBit-2.so /usr/local/lib/libgthread-2.0.so /usr/local/lib/libgmodule-2.0.so /usr/local/lib/libexslt.so /usr/local/lib/libxslt.so /usr/local/lib/libgcrypt.so /usr/local/lib/libgpg-error.so /usr/local/lib/libxml2.so -lm /usr/local/lib/libstartup-notification-1.so /usr/local/lib/libdbus-glib-1.so /usr/local/lib/libdbus-1.so -pthread /usr/local/lib/libgobject-2.0.so /usr/local/lib/libglib-2.0.so -licui18n /usr/local/lib/libintl.so /usr/local/lib/libpcre.so /usr/local/lib/libiconv.so /usr/local/lib/librarian.so -lz -lbz2 /usr/local/lib/libSM.so /usr/local/lib/libICE.so /usr/local/lib/libX11.so /usr/local/lib/libXau.so /usr/local/lib/libXdmcp.so -lrpcsvc -L/usr/local/lib/firefox -lgtkembedmoz -lxpcom -l
Re: start up scripts stopped working
Eric Zimmerman wrote: Frank Shute wrote: I spotted a couple of things with your rc.conf that could be causing you trouble: 1) There are a lot of unquoted YES's for enabling services. I don't know if that could screw thing's up but for form's sake, I'd try quoting them and rebooting. 2) You seem to have set your security level quite high. I can't find where they are documented in 6.3 (in 7.0 under security(7)) but it could be worth a try commenting out the securelevel lines and rebooting and then setting your security level through sysctl (I think you can do that). I will give this a whirl and see how it goes. I have never had issues with the unquoted YES statements unless they are not balanced (i.e. foo_enable=YES" or foo_enable="YES blows up), but I did quote everything to be consistent I commented out the securelevel stuff as well. Thanks for the suggestions. i will report back once i get the box rebooted success! commenting out the securelevel resolved the issue. i never ran into that before, but glad its working as expected now. Thanks for the help! Eric ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Defer Checking on USB Drive
I have a production server running FreeBSD 7.0-RELEASE, and it has stability issues. The problem is that after a crash, it takes quite a while to get back up and running. Most of the time is spent doing a file system check on a 500GB USB drive with a single UFS partition. I noticed that my var, root, an dtmp partitions all have their checks deferred, which is the desirable behavior as it gets the server back up and running as soon as possible. Is there a way to have the file system check for the partition that resides on the USB drive follow this same behavior? Thanks in advance for any advice. -- Andrew Christianson Orases Consulting Corporation Interactive Business and Technology Solutions phone/ 301.694.8991 ext. 100 fax/ 301.694.8993 email/ [EMAIL PROTECTED] http://www.orases.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: port seahorse won't upgrade properly
On Mon, 14 Apr 2008 13:36:18 -0500, Dino Vliet <[EMAIL PROTECTED]> wrote: I've continued with the seahorse problem. In /usr/ports/UPDATING I couldn't find anything regarding seahorse! The gnome-keyring-manager is in /usr/ports/MOVED for gnome-keyring-manager -> seahorse. For some reason, your portupgrade doesn't remove and replace to seahorse by itself. I don't know what happened. So I removed gnome-keyring-manager as you suggested. Then I did a portsnap fetch update. I then tried to install seahorse but got the following error: ===> epiphany-2.22.1.1 depends on shared library: ORBit-2.0 - found ===> epiphany-2.22.1.1 depends on shared library: pango-1.0.0 - found ===> Configuring for epiphany-2.22.1.1 checking what language compliance flags to pass to the C++ compiler... checking for DEPENDENCIES... configure: error: Package requirements ( glib-2.0 >= 2.16.0 gmodule-2.0 gio-unix-2.0 >= 2.16.0 gtk+-2.0 >= 2.12.0 gtk+-unix-print-2.0 >= 2.12.0 libxml-2.0 >= 2.6.12 libxslt >= 1.1.7 libgnome-2.0 >= 2.14.0 libgnomeui-2.0 >= 2.14.0 libglade-2.0 >= 2.3.1 gconf-2.0 gnome-desktop-2.0 >= 2.9.91 libstartup-notification-1.0 >= 0.5 libnotify >= 0.4 ) were not met: Package gnome-keyring-1 was not found in the pkg-config search path. Perhaps you should add the directory containing `gnome-keyring-1.pc' to the PKG_CONFIG_PATH environment variable Package 'gnome-keyring-1', required by 'libgnomeui', not found What now? I really don't have a clue. Hope you can help me out, Let me guess, you have selected to disable KEYRING option? It looks like this part is our fault. In Seahorse 2.22, it no longer provide option, which it required to have gnome-keyring dependency. I will fix it when I get back this afternoon by remove KEYRING option and depend on gnome-keyring. Meaning time, you can re-enable KEYRING and it should install Seahorse. Cheers, Mezz brgds Dino -- [EMAIL PROTECTED] - [EMAIL PROTECTED] FreeBSD GNOME Team http://www.FreeBSD.org/gnome/ - [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Defer Checking on USB Drive
Andy Christianson wrote: I have a production server running FreeBSD 7.0-RELEASE, and it has stability issues. The problem is that after a crash, it takes quite a while to get back up and running. Most of the time is spent doing a file system check on a 500GB USB drive with a single UFS partition. I noticed that my var, root, an dtmp partitions all have their checks deferred, which is the desirable behavior as it gets the server back up and running as soon as possible. Is there a way to have the file system check for the partition that resides on the USB drive follow this same behavior? Thanks in advance for any advice. This sounds like the pass column in your /etc/fstab file is wrong. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: advanced programming unix environment
Hi Mel,
Thanks for your reply - very insightful - i have beendelving into the c library
files - which is after all why i am readingthis book, though still at the
beginning 8).
On the pracct.c source file I have found it sufficient just to change line 31
from
struct acctacdata;
to
struct acctv1acdata;
this leaves me with only 1 error which I have side stepped but not fixed.
error: +
bsdexit2.c: In function 'thr_fn2';
bsdexit2.c:31: Warning format '%d' expects type 'int', but argument 2 has type
'pthread_t'
+
line 31of threads/bsdexit2.c reads:
printf("thread 2: ID is %d\n", pthread_self
which I have commented this line and Make finishes building.
however which "% ?" operater would I use to display pthread_self.
In the c library pthread.h it says it is of "pthread_t" type.
I appreciate your help and I am grateful that you have inspired me.
Kindest regards,
Seamus
- Original Message
From: Mel <[EMAIL PROTECTED]>
To: freebsd-questions@freebsd.org
Cc: Brother Seamus <[EMAIL PROTECTED]>
Sent: Monday, 14 April, 2008 7:51:05 PM
Subject: Re: advanced programming unix environment
On Monday 14 April 2008 18:48:58 Brother Seamus wrote:
> I am trying to build the neccesary files for the stevens/rago APUE.2e book
> on FreeBSD 7.0
> I get the following error:
> +
> pracct.c ../lib/libapue.a
> pracct.c: In function 'main':
> pracct.c:31: error: storage size of 'acdata' isn't known
> pracct.c:31: warning: unused variable 'acdata'
The legacy struct acct has been renamed to acctv1 and a new one is named
acctv2.
If you add:
typedef struct acctv1 acct_t;
After the #include
then change the type of acdata to 'acct_t', you'll probably have solved it.
But depends a bit on the rest of the library.
--
Mel
Problem with today's modular software: they start with the modules
and never get to the software part.
- Original Message
From: Mel <[EMAIL PROTECTED]>
To: freebsd-questions@freebsd.org
Cc: Brother Seamus <[EMAIL PROTECTED]>
Sent: Monday, 14 April, 2008 7:51:05 PM
Subject: Re: advanced programming unix environment
On Monday 14 April 2008 18:48:58 Brother Seamus wrote:
> I am trying to build the neccesary files for the stevens/rago APUE.2e book
> on FreeBSD 7.0
> I get the following error:
> +
> pracct.c ../lib/libapue.a
> pracct.c: In function 'main':
> pracct.c:31: error: storage size of 'acdata' isn't known
> pracct.c:31: warning: unused variable 'acdata'
The legacy struct acct has been renamed to acctv1 and a new one is named
acctv2.
If you add:
typedef struct acctv1 acct_t;
After the #include
then change the type of acdata to 'acct_t', you'll probably have solved it.
But depends a bit on the rest of the library.
--
Mel
Problem with today's modular software: they start with the modules
and never get to the software part.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Invoking ldconfig without arguments wipes all hints and makes me very sad
On Fri, 2008-04-11 at 22:13 +0200, Mel wrote: > On Friday 11 April 2008 16:42:57 Shelby Cain wrote: > > > > Why does "factory settings" not include scanning the built-in system > > library path /usr/lib? From the man page, it would seem that if I truly > > wanted to remove all runtime information I'd want to run something along > > the lines of ldconfig -s. Am I misreading something? > > It should, otherwise it's a bug in either the manpage or ldconfig. > Alright, assuming I'm not hallucinating I'll file an appropriate bug report. > > Also, under what circumstances does -v actually do something? I can't > > seem to find a case where -v actually alters the output of ldconfig. > > When it does something. For example, if your cache contains libfoo.so.1 and > you installed /usr/local/lib/libfoo.so.2, then ldconfig -vm /usr/local/lib > will print: > Updating libfoo.so.1.0 to /usr/local/lib/libfoo.so.2 > Ok, thanks. Regards, Shelby Cain signature.asc Description: This is a digitally signed message part
smbutil crypt'd password authentication failures
I'm using the FreeBSD SMB/CIFS layer for authentication to remote Windows shared resources in a domain ( smbutil(1), mount_smbfs(8), nsmb.conf(5) ). I've ran into the following situation: 1. Listing the password literally (in the clear) in nsmb.conf allows me to authenticate against the Windows domain and access resources successfully. 2. Listing the password's crypt (using 'smbutil crypt') i.e. $$1.. results in authentication failures, e.g.: # With password crypt: $ sudo smbutil view //[EMAIL PROTECTED] smbutil: unable to open connection: syserr = Authentication error smbutil: could not login to server CAFFEINEADDICTS: syserr = Authentication error # With cleartext password $ sudo smbutil view //[EMAIL PROTECTED] ShareType Comment --- share1 disk share2 disk shared disk 3 shares listed from 4 available I've retried generating the crypt of the password several times both my listing the password as a shell parameter (in single quotes) and by typing at the Password: prompt from smbutil. Each time it outputs the same crypt and I've verified accuracy of the crypt in nsmb.conf. The clear text password is 25 characters in length and contains mixed case, spaces, and symbols. A previous password worked successfully, similar in makeup but ~17 characters in length. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE #0: Mon Mar 17 18:04:24 MST 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2327.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7 Features=0xbfebfbff Features2=0x4e3bd AMD Features=0x2010 AMD Features2=0x1 Cores per package: 4 real memory = 3219169280 (3070 MB) avail memory = 3136241664 (2990 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard kbd1 at kbdmux0 netsmb_dev: loaded ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: iomem 0xfed0-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 721072106000721 device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 721072106000721 device_attach: est1 attach returned 6 p4tcc1: on cpu1 cpu2: on acpi0 est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 721072106000721 device_attach: est2 attach returned 6 p4tcc2: on cpu2 cpu3: on acpi0 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 721072106000721 device_attach: est3 attach returned 6 p4tcc3: on cpu3 cpu4: on acpi0 est4: on cpu4 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 721072106000721 device_attach: est4 attach returned 6 p4tcc4: on cpu4 cpu5: on acpi0 est5: on cpu5 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 721072106000721 device_attach: est5 attach returned 6 p4tcc5: on cpu5 cpu6: on acpi0 est6: on cpu6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 721072106000721 device_attach: est6 attach returned 6 p4tcc6: on cpu6 cpu7: on acpi0 est7: on cpu7 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 721072106000721 device_attach: est7 attach returned 6 p4tcc7: on cpu7 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 2.0 on pci0 pci1: on pcib1 pcib2: irq 16 at device 0.0 on pci1 pci2: on pcib2 pcib3: irq 16 at device 0.0 on pci2 pci3: on pcib3 pcib4: irq 16 at device 1.0 on pci2 pci4: on pcib4 pcib5: at device 0.3 on pci1 pci5: on pcib5 fwohci0: mem 0xdceff000-0xdcef irq 26 at device 5.0 on pci5 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:00:d1:00:80:35:7a:57 fwohci0: Phy 1394a avai
Re: Defer Checking on USB Drive
On Monday 14 April 2008 21:45:32 Andy Christianson wrote: > Is there a way to have the file system > check for the partition that resides on the USB drive follow this same > behavior? man tunefs, specifically, it needs to be ufs2 partitioned. Good telltale if it is ufs2 is the precense of a .snap directory in the root of the partition. fsck uses this to make a snapshot of the partition so that it can defer the fsck. And yes, could be your pass flag in fstab is set to 1, rather then 2. -- Mel Problem with today's modular software: they start with the modules and never get to the software part. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Defer Checking on USB Drive
On Mon, 14 Apr 2008 22:12:52 +0200 Mel <[EMAIL PROTECTED]> wrote: > On Monday 14 April 2008 21:45:32 Andy Christianson wrote: > > > Is there a way to have the file system > > check for the partition that resides on the USB drive follow this > > same behavior? > > man tunefs, specifically, it needs to be ufs2 partitioned. Good > telltale if it is ufs2 is the precense of a .snap directory in the > root of the partition. fsck uses this to make a snapshot of the > partition so that it can defer the fsck. It's not just a matter of its being ufs2, you also need to have soft-updates enabled for background file-checking. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Pkg_info corrupt for some packages
Hello,
I tried running the script suggested by mel and after that I was able to see
that some of those packages got registered as installed.
However some of the packages were not being found and as an example I saw
the following:
Restoring doodle-0.6.6_1
Failed: cannot find doodle-0.6.6_1 in /usr/ports/INDEX-7*
*Then as suggested by andrew I tried to see just how many packages have been
messed and to my shock the figure for the first command was 336 and for the
second command was 326.
Well...how do I 'extract the port origins' from pkgdb.db?I am sorry if I
sound naive but im a bit new to freebsd.
Hope to hear from you guys,
On Sun, Apr 13, 2008 at 11:01 PM, Mel <[EMAIL PROTECTED]>
wrote:
> On Sunday 13 April 2008 11:41:19 Aijaz Baig wrote:
> > Hi,
> >
> > Well...I tried to cut and paste the command as is by mel (though It
> would
> > have been better if you explained what that cryptic looking command
> > actually meant) and I got the followinfg output:
> >
> > 'grep: /var/db/pkg/xorg-server-1.4_4,1/+CONTENTS: No such file or
> directory
>
> Well, that explaines it right there. It wasn't installed properly, because
> every installed port should have a +CONTENTS file.
> You can grab the files from 'pkgdb.db' like Andrew suggested, but I
> personally
> wouldn't trust those if portupgrade was the one that did this in the first
> place.
> This is where daily backups rock :).
>
> If your /usr/ports/INDEX-6 (or -7) is in sync with your installed
> packages,
> then maybe the following script will work. It worked for me testing it,
> but I
> can't guarentee it will work in all cases.
>
> If you're on FreeBSD 6, change INDEXFILE to /usr/ports/INDEX-6. Rest
> should
> work without changes.
>
> #!/bin/sh
>
>
> INDEXFILE='/usr/ports/INDEX-7'
> for dir in /var/db/pkg/*; do
>if test ! -e ${dir}/+CONTENTS -a -d ${dir}; then
>pkgname=${dir##*pkg/}
>echo "Restoring ${pkgname}"
>IDX=$(grep "^${pkgname}|" ${INDEXFILE} 2>/dev/null)
>if test -z "${IDX}"; then
>echo "Failed: cannot find ${pkgname} in ${INDEXFILE}"
>else
>_origin=${IDX#*|}
>origin=${_origin%%|*}
>echo "---> ${origin}"
>cd ${origin}
>mv ${dir} /tmp/
>make -DFORCE_PKG_REGISTER generate-plist fake-pkg
>for file in /tmp/${pkgname}/*; do
>f=${file##*/}
>if test ! -f ${dir}/${f}; then
>echo "--> Restoring ${pkgname}/${f}"
>mv ${file} ${dir}/
>fi
>done
>fi
>fi
> done
>
>
> --
> Mel
>
> Problem with today's modular software: they start with the modules
>and never get to the software part.
>
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: advanced programming unix environment
On Monday 14 April 2008 22:02:22 Brother Seamus wrote:
> Hi Mel,
>
> Thanks for your reply - very insightful - i have beendelving into the c
> library files - which is after all why i am readingthis book, though still
> at the beginning 8).
>
> On the pracct.c source file I have found it sufficient just to change line
> 31
>
> from
> struct acctacdata;
> to
> struct acctv1acdata;
I changed it like this, to be compatible with other OS's:
--- proc/pracct.c~ 2005-05-24 03:59:41.0 -0800
+++ proc/pracct.c 2008-04-14 12:53:41.0 -0800
@@ -13,6 +13,12 @@
#define AXSIG 0
#endif
+#ifdef HAVE_ACCTV1
+typedef struct acctv1 acct_t;
+#else
+typedef struct acct acct_t;
+#endif
+
static unsigned long
compt2ulong(comp_t comptime) /* convert comp_t to unsigned long */
{
@@ -28,7 +34,7 @@
int
main(int argc, char *argv[])
{
- struct acct acdata;
+ acct_t acdata;
FILE*fp;
if (argc != 2)
And added HAVE_ACCTV1 to CFLAGS in Make.defines.freebsd :)
>
> this leaves me with only 1 error which I have side stepped but not fixed.
>
>
> error: +
>
> bsdexit2.c: In function 'thr_fn2';
> bsdexit2.c:31: Warning format '%d' expects type 'int', but argument 2 has
> type 'pthread_t' +
>
> line 31of threads/bsdexit2.c reads:
>
> printf("thread 2: ID is %d\n", pthread_self
>
> which I have commented this line and Make finishes building.
>
> however which "% ?" operater would I use to display pthread_self.
> In the c library pthread.h it says it is of "pthread_t" type.
Yes, it's a structure, so it's not an integer. pthread_self() returns the
structure, not the thread id. The thread id is burried in the structure and
you shouldn't make any assumptions about it's size or type, since it's opaque
to you.
However, you can cast it to int and get away with it ;)
So make it:
printf("thread 2: ID is %d\n", (int)pthread_self());
--
Mel
Problem with today's modular software: they start with the modules
and never get to the software part.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
HDD partitioning question...
Hi folks, (I'm a relative newcomer to all this... thanks for your patience & help.) I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP server. It has 2 drives - one for the OS and the other for the FTP storage. My question is about the storage drive in this case. You can see how I have things partitioned right now: # [EMAIL PROTECTED] /var/log]# mount /dev/da0s1a on / (ufs, local) devfs on /dev (devfs, local) /dev/da0s1d on /tmp (ufs, local, soft-updates) /dev/da0s1f on /usr (ufs, local, soft-updates) /dev/da0s1e on /var (ufs, local, soft-updates) /dev/da1 on /usr/home (ufs, local, soft-updates) [EMAIL PROTECTED] /var/log]# # I started by trying to use fdisk to partition the storage drive (/dev/da1) but was getting errors which I don't exactly recall - something about a problem with the 'block device'. Anyway, then I wound up using the command "newfs -O 2 /dev/da1" which seemed to work and I was then able to mount and use the drive. My question is: is there anything wrong with having "/dev/da1" mounted an in-use? Should I have created a partition like "/dev/da1s1a" or something? I seem to remember somebody once chiding me for having formatted or mounted the 'block device' itself instead of a partition... is this making any sense to anyone? Clearly I need to know more about *NIX file systems (slices, partitions, block devices) and best practices or some such - I am working on it but obviously have a ways to go! Thanks very much! dharma ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HDD partitioning question...
At 03:27 PM 4/14/2008, Dharma Wolford wrote: Hi folks, (I'm a relative newcomer to all this... thanks for your patience & help.) I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP server. It has 2 drives - one for the OS and the other for the FTP storage. My question is about the storage drive in this case. You can see how I have things partitioned right now: # [EMAIL PROTECTED] /var/log]# mount /dev/da0s1a on / (ufs, local) devfs on /dev (devfs, local) /dev/da0s1d on /tmp (ufs, local, soft-updates) /dev/da0s1f on /usr (ufs, local, soft-updates) /dev/da0s1e on /var (ufs, local, soft-updates) /dev/da1 on /usr/home (ufs, local, soft-updates) [EMAIL PROTECTED] /var/log]# # I started by trying to use fdisk to partition the storage drive (/dev/da1) but was getting errors which I don't exactly recall - something about a problem with the 'block device'. Anyway, then I wound up using the command "newfs -O 2 /dev/da1" which seemed to work and I was then able to mount and use the drive. My question is: is there anything wrong with having "/dev/da1" mounted an in-use? Should I have created a partition like "/dev/da1s1a" or something? I seem to remember somebody once chiding me for having formatted or mounted the 'block device' itself instead of a partition... is this making any sense to anyone? Clearly I need to know more about *NIX file systems (slices, partitions, block devices) and best practices or some such - I am working on it but obviously have a ways to go! Thanks very much! dharma Sounds like the drive geometry was off or you may have a drive with issues. You should have been able to create a partition with a single slice on it. I would check the drive with diagnostics from the manufacturer. Those utilities will also allow you to know the correct geometry. -Derek -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HDD partitioning question...
On Mon, Apr 14, 2008 at 01:27:24PM -0700, Dharma Wolford wrote: > Hi folks, > > (I'm a relative newcomer to all this... thanks for your patience & help.) > > I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP > server. It has 2 drives - one for the OS and the other for the FTP > storage. My question is about the storage drive in this case. > > You can see how I have things partitioned right now: > # > [EMAIL PROTECTED] /var/log]# mount > /dev/da0s1a on / (ufs, local) > devfs on /dev (devfs, local) > /dev/da0s1d on /tmp (ufs, local, soft-updates) > /dev/da0s1f on /usr (ufs, local, soft-updates) > /dev/da0s1e on /var (ufs, local, soft-updates) > /dev/da1 on /usr/home (ufs, local, soft-updates) > [EMAIL PROTECTED] /var/log]# > # > > I started by trying to use fdisk to partition the storage drive (/dev/da1) > but was getting errors which I don't exactly recall - something about a > problem with the 'block device'. > Anyway, then I wound up using the command "newfs -O 2 /dev/da1" which > seemed to work and I was then able to mount and use the drive. Let's get a technicality out of the way first. The primary division of the disk - that is usually created using fdisk is called a 'slice' in FreeBSD, not partition. If you subdivide a slice, then those subdivisions are called partitions. So, maybe you either misused fdisk or misunderstood the error message. You didn't repete either the full command you entered or the exact error message you got, so it is hard to be sure what happened with fdisk. > > My question is: is there anything wrong with having "/dev/da1" mounted an > in-use? Should I have created a partition like "/dev/da1s1a" or something? > I seem to remember somebody once chiding me for having formatted or mounted > the 'block device' itself instead of a partition... is this making any sense > to anyone? Clearly I need to know more about *NIX file systems (slices, > partitions, block devices) and best practices or some such - I am working on > it but obviously have a ways to go! It looks like you have made what is referred to in the handbook as a 'dangerously dedicated' disk. It is dangerous only because it is not compatible with anything else but what you are doing right now. If you want to access it with any other system, then it would not work. But, as long as you only write/read it with the FreeBSD system like you are, it should be no problem. If, before you get any further, you want to clean it up a little, post the full fdisk command you were using and the error message you got. jerry > > Thanks very much! > > dharma > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ipmi(4) on PowerEdge 860 - bogus CPU temperature readings
This platform is returning a bogus value for the main temperature sensor using the ipmi(4) module in 6.3/amd64: # ipmitool -V ipmitool version 1.8.8 # ipmitool sdr Temp | -54 degrees C | cr Planar Temp | 30 degrees C | ok That value should probably be an absolute value? IpmiTool: # ipmitool -v sdr': ipmitool -v sdr |more Sensor ID : Temp (0x1) Entity ID : 3.1 (Processor) Sensor Type (Analog) : Temperature Sensor Reading: -54 (+/- 1) degrees C Status: Lower Critical Nominal Reading : 50.000 Normal Minimum: 11.000 Normal Maximum: 119.000 Positive Hysteresis : -127.000 Negative Hysteresis : -127.000 Minimum sensor range : Unspecified Maximum sensor range : Unspecified Event Message Control : Per-threshold Readable Thresholds : Settable Thresholds : lcr lnc unc ucr Threshold Read Mask : lcr lnc unc ucr Event Status : Event Messages Disabled Assertion Events : Event Enable : Event Messages Disabled Assertions Enabled: Same results with FreeIPMI # ipmi-sensors 1: Temp (Temperature): -54.00 C (5.00/125.00): [At or Below (<=) Lower Critical Threshold] 2: Planar Temp (Temperature): 30.00 C (3.00/53.00): [OK] 3: CMOS Battery (Voltage): 3.06 V (2.64/NA): [OK] 4: VCORE (Voltage): [State Deasserted] 5: PROC VTT (Voltage): [State Deasserted] 6: 1.5V PG (Voltage): [State Deasserted] 7: 1.8V PG (Voltage): [State Deasserted] 8: Presence (Entity Presence): [Entity Present] 9: PROC Fan (Fan): 3150.00 RPM (750.00/NA): [OK] 10: DIMM Fan (Fan): 3000.00 RPM (750.00/NA): [OK] 11: PCI Fan (Fan): 1350.00 RPM (1425.00/NA): [OK] 12: Status (Processor): [Processor Presence detected] 13: VRM (Power Supply): [Presence detected] 14: OS Watchdog (Watchdog 2): [OK] 15: SEL (Event Logging Disabled): [Unknown] 16: Intrusion (Platform Chassis Intrusion): [OK] 17: Temp Interface (Temperature): [OK] 23: ECC Corr Err (Memory): [Unknown] 24: ECC Uncorr Err (Memory): [Unknown] 25: I/O Channel Chk (Critical Interrupt): [Unknown] 26: PCI Parity Err (Critical Interrupt): [Unknown] 27: PCI System Err (Critical Interrupt): [Unknown] 28: SBE Log Disable (Event Logging Disabled): [Unknown] 29: Logging Disable (Event Logging Disabled): [Unknown] 30: Unknown (System Event): [Unknown] 31: PROC Protocol (Processor): [Unknown] 32: PROC Bus PERR (Processor): [Unknown] 33: PROC Init Err (Processor): [Unknown] 34: PROC Machine Ch (Processor): [Unknown] 35: Memory Spared (Memory): [Unknown] 36: Memory Mirrored (Memory): [Unknown] 37: Memory RAID (Memory): [Unknown] 38: Memory Added (Memory): [Unknown] 39: Memory Removed (Memory): [Unknown] 40: PCIE Fatal Err (Critical Interrupt): [Unknown] 41: Chipset Err (Critical Interrupt): [Unknown] 42: Err Reg Pointer (OEM Reserved): [Unknown] dmesg(8): Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD RELENG_6_3_amd64-CFI_INTERNAL-022408-1232EST #0: Sun Feb 24 19:43:21 UTC 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMP ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU3050 @ 2.13GHz (2133.42-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f2 Stepping = 2 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100800 AMD Features2=0x1 Cores per package: 2 real memory = 1073479680 (1023 MB) avail memory = 1020604416 (973 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic1: Changing APIC ID to 3 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 32-55 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:42:43) acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: iomem 0xfed0-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 cpu1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib2: at device 28.0 on pci0 pci2: on pcib2 pcib3: at device 0.0 on pci2 pci3: on pcib3 pcib4: at device 2.0 on pci3 pci4: on pcib4 pci4: at device 2.0 (no driver attached) pci4: at device 4.0 (no driver attached) pci4: at device 4.1 (no driver attached) pci4: at device 4.2 (no driver attached) atapci0: port 0xe8f0-0xe8f7,0xe8e4-0xe8e7,0xe8d8-0xe8df,0xe8d0-0xe8d3,0xe870-0xe87f mem 0xdfdeec00-0xdfdeecff irq 32 at device 7.0 on pci4 ata2: on atapci0 ata3: on atapci0 pcib5: at device 28.4 on pci0 pci5: on pcib5 bge0: mem 0xdf9f-0xdf9f irq 16 a
Re: wlan driver for VIA USB card
Peter Boosten <[EMAIL PROTECTED]> wrote: > [EMAIL PROTECTED] wrote: > > I am looking for a driver for the VIA VNT6656G6A40 54 MBps Wireless USB > > Module to run on FreeBSD 7.0 i386. This is a daughterboard built around the > > VIA 6656 chipset. Two VIA drivers are listed in /boot/defaults/loader.conf > > but they are for different chip sets. > > > > http://www.via.com.tw/en/products/networking/wireless/vt6656/ > > > > http://www.logicsupply.com/products/vnt6656g6a40 > > > > Gary, > > You can make one yourself if you have the Windows drivers. Have a look > at ndisgen(8). Thanks, I appreciate the effort. Call me a fool, but I am designing Open Slate to work independently of Windows. The lack of other positive replies suggests nobody has a native driver, so on to the next question: VIA has Linux source available. Assuming the license is tenable and the code is functional, how hard would it be to convert it to FreeBSD format? Assume an experienced C programmer with zero experience writing drivers. I'm thinking, grab the source for a similar driver, one that works well, and divine how to match the backside with the frontside. There's still time to call me a fool. Gary Dunn Open Slate Project http://openslate.net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HDD partitioning question...
On Monday 14 April 2008 18:36:30 Derek Ragona wrote: > At 03:27 PM 4/14/2008, Dharma Wolford wrote: > >Hi folks, > > > >(I'm a relative newcomer to all this... thanks for your patience & help.) > > > >I've installed FreeBSD 6.2 on a system that will be primarily used as an > > FTP server. It has 2 drives - one for the OS and the other for the FTP > > storage. My question is about the storage drive in this case. > > > >You can see how I have things partitioned right now: > ># > >[EMAIL PROTECTED] /var/log]# mount > >/dev/da0s1a on / (ufs, local) > >devfs on /dev (devfs, local) > >/dev/da0s1d on /tmp (ufs, local, soft-updates) > >/dev/da0s1f on /usr (ufs, local, soft-updates) > >/dev/da0s1e on /var (ufs, local, soft-updates) > >/dev/da1 on /usr/home (ufs, local, soft-updates) > >[EMAIL PROTECTED] /var/log]# > ># > > > >I started by trying to use fdisk to partition the storage drive (/dev/da1) > >but was getting errors which I don't exactly recall - something about a > >problem with the 'block device'. > >Anyway, then I wound up using the command "newfs -O 2 /dev/da1" which > >seemed to work and I was then able to mount and use the drive. > > > >My question is: is there anything wrong with having "/dev/da1" mounted > > an in-use? Should I have created a partition like "/dev/da1s1a" or > > something? I seem to remember somebody once chiding me for having > > formatted or mounted the 'block device' itself instead of a partition... > > is this making any sense to anyone? Clearly I need to know more about > > *NIX file systems (slices, partitions, block devices) and best practices > > or some such - I am working on it but obviously have a ways to go! > > > >Thanks very much! > > > >dharma > > Sounds like the drive geometry was off or you may have a drive with > issues. You should have been able to create a partition with a single > slice on it. I would check the drive with diagnostics from the > manufacturer. Those utilities will also allow you to know the correct > geometry. > > -Derek If you issue the command: fdisk -I /dev/da1 -I Initialize sector 0 slice table for one FreeBSD slice covering the entire disk. and then: ls /dev/da1* you'll get: /dev/da1 /dev/da1s1 which I believe is what you want. then you can: newfs -O 2 (-U) /dev/da1s1 then you can: mount /dev/da1s1 /whatever -- Mario Lobo http://www.mallavoodoo.com.br FreeBSD since version 2.2.8 [not Pro-Audio YET!!] (99,7% winedows FREE) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Limiting apache's upload speed?
On 0, Manolis Kiagias <[EMAIL PROTECTED]> wrote: > Patsy wrote: >> >> I do not wish to take my website down and so I was hoping somebody would >> be able to tell me if it is possible to throttle apache's upload speed. It >> seems that this would provide a good solution - people will need to wait a >> little longer to see my page, but a change of waiting 3 seconds to waiting >> 6 seconds isn't terrible. >> >> My router does not appear to have the option to throttle individual >> hosts/ports. Any advice on the matter would be appreciated. >> >> Patsy >> > > I run something similar here in Greece, but have not noticed any > performance problems just yet. You are probably getting a lot of hits! > > What you need is an apache module designed specifically for speed / > bandwidth throttling: www/mod_cband > > You may also wish to have a look at these instructions (linux specific, but > easy to adjust for FreeBSD): > > http://howtoforge.com/mod_cband_apache2_bandwidth_quota_throttling > > BTW, what is your ADSL speed? You mention upload capacity of 500kb/s, and I > suppose you mean kbits/sec, *not* kbytes/sec. Assuming it is kbits, you may > well be consuming all your upload bandwidth if for some reason you get more > than a few simultaneous connections... My estimated upload speed is 500kilobits per second. mod_cband seems to do the trick perfectly. I set maximum global upload to 400kilobits per second and all seems to be working well. Just as a side note for anyone S'ing the FA's, when I ran: #pkg_add -r mod_cband it pulled down a version of mod_cband compiled for Apache 2.0, with Apache 2.0 therefore being a dependancy, it was pulled down as well. After I removed 2.0, I needed to reinstall 2.2 and make mod_cband from ports. None of this was a problem, I just thought it should be on the list somewhere. Many thanks to everybody who responded. Patsy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
[?OT?] strndup exists in FreeBSD?
I'm getting an undefined reference to strndup, so clearly there's a header somewhere with it - doesn't seem to be in my default libc, however on 7.0-amd64? Thanks, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Limiting apache's upload speed?
On Tuesday 15 April 2008 00:15:45 David Kaye wrote: > Just as a side note for anyone S'ing the FA's, when I ran: > > #pkg_add -r mod_cband > > it pulled down a version of mod_cband compiled for Apache 2.0, with Apache > 2.0 therefore being a dependancy, it was pulled down as well. After I > removed 2.0, I needed to reinstall 2.2 and make mod_cband from ports. None > of this was a problem, I just thought it should be on the list somewhere. If you pull packages from FreeBSD servers, then you should expect them to use default options (more to the point, the options defined by PACKAGE_BUILDING if the port specifies it) and default dependencies. The default APACHE_PORT is www/apache20. If you use www/apache22, then you 'cannot' use those packages. -- Mel Problem with today's modular software: they start with the modules and never get to the software part. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: [?OT?] strndup exists in FreeBSD?
On Tuesday 15 April 2008 00:43:24 Steve Franks wrote: > I'm getting an undefined reference to strndup, so clearly there's a > header somewhere with it - doesn't seem to be in my default libc, > however on 7.0-amd64? as BUF_strndup. And no, there's no strndup. -- Mel Problem with today's modular software: they start with the modules and never get to the software part. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: [?OT?] strndup exists in FreeBSD?
On Mon, 14 Apr 2008 15:43:24 -0700, "Steve Franks" <[EMAIL PROTECTED]> wrote: > I'm getting an undefined reference to strndup, so clearly there's a > header somewhere with it - doesn't seem to be in my default libc, > however on 7.0-amd64? I don't see an strndup() function in our libc. [EMAIL PROTECTED]:/usr/src/lib/libc/string$ grep ^strdup *.c strdup.c:strdup(str) [EMAIL PROTECTED]:/usr/src/lib/libc/string$ grep ^strndup *.c [EMAIL PROTECTED]:/usr/src/lib/libc/string$ While it seems like a cool function name, what's the point of having it? If you know how much you want to copy, it's trivial to allocate a buffer large enough and strlcpy() into it. If you don't know how much you want to copy, then strdup() is ok anyway :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HDD partitioning question...
On Mon, Apr 14, 2008 at 3:38 PM, Mario Lobo <[EMAIL PROTECTED]> wrote: > > If you issue the command: > > fdisk -I /dev/da1 > > -I Initialize sector 0 slice table for one FreeBSD slice covering > the entire disk. > > and then: ls /dev/da1* > > you'll get: > > /dev/da1 > /dev/da1s1 > > which I believe is what you want. > > then you can: newfs -O 2 (-U) /dev/da1s1 > > then you can: mount /dev/da1s1 /whatever > > -- > Mario Lobo Thanks Mario, and Jerry and Derek! Jerry, Introducing the idea of 'dangerously dedicated' disks helped a lot... it lead me to this page: http://www.freebsd.org/doc/en_US.ISO8859-1/articles/formatting-media/index.html ...which gave some additional info on 'dedicated mode' and 'compatability mode' and walked me through the steps to create either. I managed to do that and then tried to mount the /dev/da1s1 device but it complained about 'incorrect super block' until I executed "newfs -O 2 /dev/da1s1" after which I was able to mount it! [EMAIL PROTECTED] /usr]# mount /dev/da0s1a on / (ufs, local) devfs on /dev (devfs, local) /dev/da0s1d on /tmp (ufs, local, soft-updates) /dev/da0s1f on /usr (ufs, local, soft-updates) /dev/da0s1e on /var (ufs, local, soft-updates) /dev/da1s1 on /usr/home (ufs, local, soft-updates) [EMAIL PROTECTED] /usr]# I did all that just before I saw Mario's response (thanks again!) so... anyway, looks like I've got it going in a better way now and it agrees with what Mario suggested I should be expecting so I'm happy. Thanks to all! dharma ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
file/directory names with space in between
Hi,
I need to work on some files and directories that have spaces in them like:
interesting story\2008 March\{story one,story two}.
When using find with -exec, part of the file/directory name will be
missing and therefore lead to error.
What should I do to put escape key in there to include full names?
Simon
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: [?OT?] strndup exists in FreeBSD?
On Tuesday 15 April 2008 01:06:24 Giorgos Keramidas wrote: > On Mon, 14 Apr 2008 15:43:24 -0700, "Steve Franks" <[EMAIL PROTECTED]> wrote: > > I'm getting an undefined reference to strndup, so clearly there's a > > header somewhere with it - doesn't seem to be in my default libc, > > however on 7.0-amd64? > > I don't see an strndup() function in our libc. > > [EMAIL PROTECTED]:/usr/src/lib/libc/string$ grep ^strdup *.c > strdup.c:strdup(str) > [EMAIL PROTECTED]:/usr/src/lib/libc/string$ grep ^strndup *.c > [EMAIL PROTECTED]:/usr/src/lib/libc/string$ > > While it seems like a cool function name, what's the point of having it? > If you know how much you want to copy, it's trivial to allocate a buffer > large enough and strlcpy() into it. If you don't know how much you want > to copy, then strdup() is ok anyway :) It can be convenient for trickery: char file[MAXPATHLEN]; char *dir; ... dir = strndup(file, (strrchr(file, '/')-file))); Or space optimization: char *p, *path; path = malloc(MAXPATHLEN); (void)strlcpy(path, argv[i], MAXPATHLEN); p = strndup(path, strlen(path)); free(path); But, personally I prefer taking the long route or wasting a few bytes over dual allocations. -- Mel Problem with today's modular software: they start with the modules and never get to the software part. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: [?OT?] strndup exists in FreeBSD?
> While it seems like a cool function name, what's the point of having it? > If you know how much you want to copy, it's trivial to allocate a buffer > large enough and strlcpy() into it. If you don't know how much you want > to copy, then strdup() is ok anyway :) Granted. It's just one more thing to hack when porting linux code (which I'm getting rather tired of doing, I must admit - they seem to assume everyone likes to include every new api ever concieved, then they go off and use them...) Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: file/directory names with space in between
Simon Gao wrote:
> I need to work on some files and directories that have spaces in them like:
>
> interesting story\2008 March\{story one,story two}.
>
> When using find with -exec, part of the file/directory name will be missing
> and therefore lead to error.
>
> What should I do to put escape key in there to include full names?
$ echo foo > "test 1"
$ find . -type f -exec cat {} \;
foo
Looks like it Just Works(tm), no quoting necessary. Could you provide
the actually command you're running that isn't doing what you expect?
--
Chris Cowart
Network Technical Lead
Network & Infrastructure Services, RSSP-IT
UC Berkeley
pgpok0Zsz3fiS.pgp
Description: PGP signature
Re: Avermedia 507 TV
On Monday 14 April 2008 12:25:14 Victor M. Blood wrote: > On 14.04.2008, Da Rock wrote: > > On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote: > >> Hi, All. > >> > >> Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use > >> saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs, > >> but freeze on begin chanel tunin... > >> > >> How to test tuner and drivers works or not. > > > > I haven't had success yet- but I have an E506AR. Where did you get the > > drivers from? I couldn't get access myself. > > saa_driver included in kbtv distrib, and can be found in inet, driver > homepage is broken. I-m install it from port kbtv, the nessasary > bsd-patche within distrib tarball I suspect your tuner (terratec?) is not amongst the supported ones. Dan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: HDD partitioning question...
On Mon, Apr 14, 2008 at 04:08:11PM -0700, Dharma Wolford wrote: > On Mon, Apr 14, 2008 at 3:38 PM, Mario Lobo <[EMAIL PROTECTED]> wrote: > > > > > If you issue the command: > > > > fdisk -I /dev/da1 > > > > -I Initialize sector 0 slice table for one FreeBSD slice covering > > the entire disk. > > > > and then: ls /dev/da1* > > > > you'll get: > > > > /dev/da1 > > /dev/da1s1 > > > > which I believe is what you want. > > > > then you can: newfs -O 2 (-U) /dev/da1s1 > > > > then you can: mount /dev/da1s1 /whatever > > > > -- > > Mario Lobo > > > > Thanks Mario, and Jerry and Derek! > > Jerry, Introducing the idea of 'dangerously dedicated' disks helped a lot... > it lead me to this page: > > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/formatting-media/index.html > > ...which gave some additional info on 'dedicated mode' and 'compatability > mode' and walked me through the steps to create either. I managed to do > that and then tried to mount the /dev/da1s1 device but it complained about > 'incorrect super block' until I executed "newfs -O 2 /dev/da1s1" after > which I was able to mount it! I would have gone on then and used bsdlabel to create one partition in the single slice before doing the newfs again. That would have given you /dev/da1s1a . jerry > > > [EMAIL PROTECTED] /usr]# mount > /dev/da0s1a on / (ufs, local) > devfs on /dev (devfs, local) > /dev/da0s1d on /tmp (ufs, local, soft-updates) > /dev/da0s1f on /usr (ufs, local, soft-updates) > /dev/da0s1e on /var (ufs, local, soft-updates) > /dev/da1s1 on /usr/home (ufs, local, soft-updates) > [EMAIL PROTECTED] /usr]# > > > I did all that just before I saw Mario's response (thanks again!) so... > anyway, looks like I've got it going in a better way now and it agrees with > what Mario suggested I should be expecting so I'm happy. > > Thanks to all! > > dharma > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: file/directory names with space in between
On Mon, Apr 14, 2008, Simon Gao wrote:
>Hi,
>
>I need to work on some files and directories that have spaces in them like:
>
>interesting story\2008 March\{story one,story two}.
>
>When using find with -exec, part of the file/directory name will be
>missing and therefore lead to error.
Generally it's better to use find and xargs when processing
arbitrary lists of files. It can be significantly more efficient
than ``exec'ing'' a command for each file when the command can
process multiple arguments, and they previde for file names with
strange characters using the -print0 option to find, and -0
option to xargs as in:
find something -print0 | xargs -0 command
Bill
--
INTERNET: [EMAIL PROTECTED] Bill Campbell; Celestial Software LLC
URL: http://www.celestial.com/ PO Box 820; 6641 E. Mercer Way
Voice: (206) 236-1676 Mercer Island, WA 98040-0820
Fax:(206) 232-9186
The ultimate result of shielding men from the effects of folly is to fill
the world with fools. -- Herbert Spencer (1891)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: [?OT?] strndup exists in FreeBSD?
On Mon, 14 Apr 2008 16:27:42 -0700, "Steve Franks" <[EMAIL PROTECTED]> wrote: >> While it seems like a cool function name, what's the point of having it? >> If you know how much you want to copy, it's trivial to allocate a buffer >> large enough and strlcpy() into it. If you don't know how much you want >> to copy, then strdup() is ok anyway :) > > Granted. It's just one more thing to hack when porting linux code > (which I'm getting rather tired of doing, I must admit - they seem to > assume everyone likes to include every new api ever concieved, then > they go off and use them...) Ah, I see now. I think I know the feeling... I just saw a diff fly by at the review emails at work, which replaced strlcpy() with strncpy() because of a similar problem, only this time the other way around. The libc of BSD and Solaris includes strlcpy() and strlcat(), but it's unavailable in Linux, so we have to either "hack around" the missing feature with strncpy() or conditionally include a BSD licensed version of strlcpy() to our compatibility cruft. ``Portability is a huge chimera.'' Oh well :( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: [?OT?] strndup exists in FreeBSD?
On Tue, 15 Apr 2008 01:26:40 +0200, Mel <[EMAIL PROTECTED]> wrote: > On Tuesday 15 April 2008 01:06:24 Giorgos Keramidas wrote: >> On Mon, 14 Apr 2008 15:43:24 -0700, "Steve Franks" <[EMAIL PROTECTED]> > wrote: >> > I'm getting an undefined reference to strndup, so clearly there's a >> > header somewhere with it - doesn't seem to be in my default libc, >> > however on 7.0-amd64? >> >> I don't see an strndup() function in our libc. >> >> [EMAIL PROTECTED]:/usr/src/lib/libc/string$ grep ^strdup *.c >> strdup.c:strdup(str) >> [EMAIL PROTECTED]:/usr/src/lib/libc/string$ grep ^strndup *.c >> [EMAIL PROTECTED]:/usr/src/lib/libc/string$ >> >> While it seems like a cool function name, what's the point of having it? >> If you know how much you want to copy, it's trivial to allocate a buffer >> large enough and strlcpy() into it. If you don't know how much you want >> to copy, then strdup() is ok anyway :) > > It can be convenient for trickery: > char file[MAXPATHLEN]; > char *dir; > ... > dir = strndup(file, (strrchr(file, '/')-file))); I know, but I don't feel safe when I see code like this. All sorts of amusing things can happen when it's used this way and strrchr() returns NULL though, so it is safer to explicitly allocate buffers and check what's going on. > Or space optimization: > char *p, *path; > path = malloc(MAXPATHLEN); > (void)strlcpy(path, argv[i], MAXPATHLEN); > p = strndup(path, strlen(path)); > free(path); > > But, personally I prefer taking the long route or wasting a few bytes > over dual allocations. I can definitely agree with this part :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Go EvO
gang, there's just something about kmail/kontact that grabs me the wrong way. on my ubuntu server where gnome is my wm, i use BOTH KDE and GNome, and use evo[gnome is my default] here on my primary computer i chose kde. i know the 2 are inter-operable, but i can't seem to add evolution to my top/button bar--nor even the middle part of the screen. i think i've fingured out how to get a gnome-settings-daemon running; still not sure thar ALL things-gnome fly. if i do use evo, how can i get it to exec konqueror as my default browser? konq has the festival tts tools and helps me grind thru billions-and-billions of lines of deep/technical stuff... thanks much for any help; either onlist or off. gary -- Gary Kline [EMAIL PROTECTED] www.thought.org Public Service Unix http://jottings.thought.org http://transfinite.thought.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
cutecom requires sudo to work, but minicom works without - permissions?
I have two terminal programs - cutecom and minicom, both built from ports with no tweaks. Minicom will fire up and hit the serial port just fine, but cutecom can't open it except with sudo. I tried tweaking devfs.conf (as well as a straight chmod on /dev/cuad0), and it doesn't seem to rectify the problem. I've also got several linux ports that hit usb devices via libusb that won't connect without sudo - obviously, I'd like not to have to run user-type apps with sudo on my system Thanks, Steve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Go EvO
On Mon, Apr 14, 2008 at 8:22 PM, Gary Kline <[EMAIL PROTECTED]> wrote: > >gang, > >there's just something about kmail/kontact that grabs me the >wrong way. on my ubuntu server where gnome is my wm, i use >BOTH KDE and GNome, and use evo[gnome is my default] >here on my primary computer i chose kde. i know the 2 are >inter-operable, but i can't seem to add evolution to my top/button >bar--nor even the middle part of the screen. i think i've >fingured out how to get a gnome-settings-daemon running; still >not sure thar ALL things-gnome fly. run gnome-default-applications-properties > > >if i do use evo, how can i get it to exec konqueror as my default >browser? konq has the festival tts tools and helps me grind thru >billions-and-billions of lines of deep/technical stuff... > >thanks much for any help; either onlist or off. > >gary > > > > -- > Gary Kline [EMAIL PROTECTED] www.thought.org Public Service Unix >http://jottings.thought.org http://transfinite.thought.org > > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > [EMAIL PROTECTED]" > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Skype
Hi guys, I'm trying to install skype on freebsd 7.0-stable, but I can't find out what I'm missing. I found several procedures on the web, but none of them was really efficient to get it working. I thnk I have know severa linux_base installation, maybe it could be the problem, so how to fix it? My /etc/make.conf contains the line: OVERRIDE_LINUX_BASE_PORT=f8 Actually the install is finem but everytime I launch skype, I have only a white window with End User License Agreement. I can see grey band at the top and the bottom of the window instead of the menu and status bar (I suppose). I try to download Skype 2 but libasound2 is required, so I was not able to get it working. How can I get a decent skype installation? Thanks by advance Sebastien ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Skype
On Tue, 15 Apr 2008 01:35:48 + Sébastien Morand <[EMAIL PROTECTED]> wrote: > Hi guys, > > I'm trying to install skype on freebsd 7.0-stable, but I can't find out what > I'm > missing. I found several procedures on the web, but none of them was really > efficient to get it working. I thnk I have know severa linux_base > installation, > maybe it could be the problem, so how to fix it? > > My /etc/make.conf contains the line: > OVERRIDE_LINUX_BASE_PORT=f8 > > Actually the install is finem but everytime I launch skype, I have only a > white > window with End User License Agreement. I can see grey band at the top and > the > bottom of the window instead of the menu and status bar (I suppose). > > I try to download Skype 2 but libasound2 is required, so I was not able to > get > it working. > > How can I get a decent skype installation? > > Thanks by advance > > Sebastien How are you trying to install it? Are you using the ports collection? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Avermedia 507 TV
On Tue, 2008-04-15 at 01:30 +0200, Danny Pansters wrote: > On Monday 14 April 2008 12:25:14 Victor M. Blood wrote: > > On 14.04.2008, Da Rock wrote: > > > On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote: > > >> Hi, All. > > >> > > >> Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use > > >> saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs, > > >> but freeze on begin chanel tunin... > > >> > > >> How to test tuner and drivers works or not. > > > > > > I haven't had success yet- but I have an E506AR. Where did you get the > > > drivers from? I couldn't get access myself. > > > > saa_driver included in kbtv distrib, and can be found in inet, driver > > homepage is broken. I-m install it from port kbtv, the nessasary > > bsd-patche within distrib tarball > > I suspect your tuner (terratec?) is not amongst the supported ones. Both are Avermedia actually as posted, and yes they're only marginally supported. So far only the analogue works (possibly). That saa driver- I thought there was a problem with the site, but I had no idea it could be downloaded with kbtv. I thought it was only compiled with support for the driver, not the driver itself. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: file/directory names with space in between
On Mon, 14 Apr 2008 16:39:23 -0700
Bill Campbell <[EMAIL PROTECTED]> wrote:
> On Mon, Apr 14, 2008, Simon Gao wrote:
> >Hi,
> >
> >I need to work on some files and directories that have spaces in
> >them like:
> >
> >interesting story\2008 March\{story one,story two}.
> >
> >When using find with -exec, part of the file/directory name will be
> >missing and therefore lead to error.
>
> Generally it's better to use find and xargs when processing
> arbitrary lists of files. It can be significantly more efficient
> than ``exec'ing'' a command for each file when the command can
> process multiple arguments, and they previde for file names with
> strange characters using the -print0 option to find, and -0
> option to xargs as in:
find has neither of the limitations you mention. It does the equivalent
of "-print0 | xargs -0" automatically, and can handle multiple arguments
with "{} +". It also has -execdir which can be convenient.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Come Join My Network at Diigo
I've been using Diigo and thought you might like to try it out. Here's an invitation to create an account and connect with me on Diigo. [1]most wanted ([EMAIL PROTECTED]) is a member of Diigo and would like to send you an invitation. To accept this invitation and register for your free account, please click and visit [2]Create Account If you haven't already heard about Diigo, you can view a short [3]introductory video here. As you will see, Diigo is both a powerful research tool and a knowledge-sharing community that allows you: - to add highlights and sticky notes on any web pages, just as you can on books! - to create and organize your personal digest of the web, and access and search it from anywhere. - to create groups for collaborative research. - to keep in touch with friends effortlessly and non-intrusively by sharing contents. - to connect with others based on shared content and interests. - to discover quality resources on any subject or get personalized recommendations. We're still working every day to improve Diigo. We hope you'll like Diigo. We do. And, it's only going to get better! Thanks The Diigo Team If clicking the URLs in this message does not work, copy and paste the following link into the address bar of your browser: http://www.diigo.com/sign-up?i_key=3e84cffcb28816a41be61ced1133243c References 1. http://www.diigo.com/profile/mostwanted?i_key=3e84cffcb28816a41be61ced1133243c 2. http://www.diigo.com/sign-up?i_key=3e84cffcb28816a41be61ced1133243c 3. http://www.youtube.com/watch?v=0RvAkTuL02A ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Skype
On Monday 14 April 2008, Eduardo Cerejo said: > On Tue, 15 Apr 2008 01:35:48 + > > Sébastien Morand <[EMAIL PROTECTED]> wrote: > > Hi guys, > > > > I'm trying to install skype on freebsd 7.0-stable, but I can't > > find out what I'm missing. I found several procedures on the web, > > but none of them was really efficient to get it working. I thnk I > > have know severa linux_base installation, maybe it could be the > > problem, so how to fix it? > > > > My /etc/make.conf contains the line: > > OVERRIDE_LINUX_BASE_PORT=f8 > > > > Actually the install is finem but everytime I launch skype, I > > have only a white window with End User License Agreement. I can > > see grey band at the top and the bottom of the window instead of > > the menu and status bar (I suppose). > > > > I try to download Skype 2 but libasound2 is required, so I was > > not able to get it working. > > > > How can I get a decent skype installation? What FreeBSD version are you running? Skype 2.0 hasn't been ported yet (I'm working on it). -- --- Beech Rintoul - FreeBSD Developer - [EMAIL PROTECTED] /"\ ASCII Ribbon Campaign | FreeBSD Since 4.x \ / - NO HTML/RTF in e-mail | http://www.freebsd.org X - NO Word docs in e-mail | Latest Release: / \ - http://www.FreeBSD.org/releases/7.0R/announce.html --- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Avermedia 507 TV
On 15.04.2008, Da Rock wrote: > On Tue, 2008-04-15 at 01:30 +0200, Danny Pansters wrote: >> On Monday 14 April 2008 12:25:14 Victor M. Blood wrote: >> > On 14.04.2008, Da Rock wrote: >> > > On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote: >> > >> Hi, All. >> > >> >> > >> Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use >> > >> saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs, >> > >> but freeze on begin chanel tunin... >> > >> >> > >> How to test tuner and drivers works or not. >> > > >> > > I haven't had success yet- but I have an E506AR. Where did you get the >> > > drivers from? I couldn't get access myself. >> > >> > saa_driver included in kbtv distrib, and can be found in inet, driver >> > homepage is broken. I-m install it from port kbtv, the nessasary >> > bsd-patche within distrib tarball >> >> I suspect your tuner (terratec?) is not amongst the supported ones. > Both are Avermedia actually as posted, and yes they're only marginally > supported. So far only the analogue works (possibly). > That saa driver- I thought there was a problem with the site, but I had > no idea it could be downloaded with kbtv. I thought it was only compiled > with support for the driver, not the driver itself. =from kbtv README If you set the WITH_SAA variable to True the saa.ko kernel module will be built and installed, as well as the tvv X-based viewer (gets embedded into kbtv) and a saa Python module that allows for tuning and such, exactly like the bt848 module provides for Brooktree based hardware. Note that some parts, not needed for kbtv, are not built and not installed by kbtv. = ls kbtv-1.0/saa/patches patch-Makefile patch-support::tuner_ctrl.h ls kbtv-1.0/saa/saa kmod ROMS support tvv LICENSE Makefile Makevars README saa-driver that loading is here http://download.purpe.com/files/saa-REL_14.tgz or http://download.purpe.com/files/ bsd patches from /usr/ports/multimedia/kbtv/work/*/saa/patches kbtv: http://freebsd.ricin.com/kbtv/ http://sourceforge.net/projects/kbtv http://freebsd.ricin.com/ports/distfiles/kbtv-1.2.5.tbz -- With all regards, Victor M. Blood. mailto: [EMAIL PROTECTED] FTN: 2:5024/[EMAIL PROTECTED], ICQ#3567656 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Avermedia 507 TV
On 15.04.2008, Da Rock wrote: How I can test my tuner? I'm newbee to bsd and can't understan why tuner do not works, than driver loaded without errors -- With all regards, Victor M. Blood. mailto: [EMAIL PROTECTED] FTN: 2:5024/[EMAIL PROTECTED], ICQ#3567656 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
