Re: shellscript conditional to check for external disk
On Sun, Jun 22, 2008 at 12:22:07AM +0100, RW wrote: > On Sun, 22 Jun 2008 00:47:31 +0200 > Roland Smith <[EMAIL PROTECTED]> wrote: > > > > Use glabel(8) to give the device an unique label. There is no telling > > which device /dev/da0s1d is pointing to! After labeling you can check > > for /dev//, which should be unique. > > I think that should be: > > /dev/label/ That is only for non-filesystem labels, according to glabel(8): "This class also provides volume label detection for file systems. Those labels cannot be set with glabel, but must be set with the appropriate file system utility, e.g. for UFS the file system label is set with tunefs(8). Currently supported file systems are: o UFS1 (directory /dev/ufs/). o UFS2 (directory /dev/ufs/). o MSDOSFS (FAT12, FAT16, FAT32) (directory /dev/msdosfs/). o CD ISO9660 (directory /dev/iso9660/). o EXT2FS (directory /dev/ext2fs/). o REISERFS (directory /dev/reiserfs/). o NTFS (directory /dev/ntfs/). Non file-system labels are created in the directory /dev/label/." Roland -- R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) pgpbyQ4XO1cnF.pgp Description: PGP signature
Re: shellscript conditional to check for external disk
On Sat, Jun 21, 2008 at 06:06:17PM -0500, Tim Daneliuk wrote: > > Use glabel(8) to give the device an unique label. There is no telling > > which device /dev/da0s1d is pointing to! After labeling you can check > > for /dev//, which should be unique. > > > > Make sure to unmount the drive at the end of the backup script, or > > you'll get a kernel panic when staff pulls the plug on a mounted device. > > > > Roland > > A variant of this approach that is filesystem independent would be > to simply write an identifying zero-length file in the root of > the removable backup drive: > > mount /mountpoint /dev/device > cd /mountpoint && touch ThisIsABackupDrive > > Your backup script can just look for the presence of the file > "ThisIsABackupDrive" whenever it is checking to see whether the drive > is mounted. The problem is that there can be several device nodes for USB disks, each with up to four slices times six usable partitions. How are you going to pick the right one? You'd have to try them all. > Since this is done at the filename level rather than in the disk > metadata, your script doesn't care/have to change if the removable > drive is formatted NTFS, FAT32, ufs, etc. I use such disks myself for > the exact reason you do, but I keep them FAT32 because pretty much > everything can read this filesystem. Of course, FAT32 cannot preserve > the file naming and permissions semantics of ufs, so I just make by > backups into a tarball and then copy the tarball to the removable > drive. Glabel(8) supports UFS, FAT12, FAT16, FAT32, ISO9660, ext2fs, reiserfs and ntfs. Roland -- R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) pgp6POFCcROJH.pgp Description: PGP signature
rndc issues
# rndc reload rndc: connection to remote host closed This may indicate that the remote server is using an older version of the command protocol, this host is not authorized to connect, or the key is invalid. I have tried regenerating the key file and have edited named.conf and rndc.conf several times all to no avail. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: shellscript conditional to check for external disk
On Sun, 22 Jun 2008 11:13:15 +0200 Roland Smith <[EMAIL PROTECTED]> wrote: > On Sun, Jun 22, 2008 at 12:22:07AM +0100, RW wrote: > > On Sun, 22 Jun 2008 00:47:31 +0200 > > Roland Smith <[EMAIL PROTECTED]> wrote: > > > > > > > Use glabel(8) to give the device an unique label. There is no > > > telling which device /dev/da0s1d is pointing to! After labeling > > > you can check for /dev//, which should be > > > unique. > > > > I think that should be: > > > > /dev/label/ > > That is only for non-filesystem labels, according to glabel(8): > > "This class also provides volume label detection for file > systems. Those labels cannot be set with glabel, but must be set > with the appropriate file system utility, > ... > Non file-system labels are created in the directory /dev/label/." but you did write: "Use glabel(8) to give the device an unique label", so it would be a non-filesystem label. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: shellscript conditional to check for external disk
You can use /var/log/messages to check for the existence of an external drive through a series of grep commands. Here is my log output when I insert/remove a USB drive: Jun 22 11:44:49 Christi kernel: umass0: on uhub4 Jun 22 11:44:49 Christi root: Unknown USB device: vendor 0x0781 product 0x5150 b us uhub4 Jun 22 11:44:49 Christi kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Jun 22 11:44:49 Christi kernel: da0: Removable Direct Access SCSI-2 device Jun 22 11:44:49 Christi kernel: da0: 40.000MB/s transfers Jun 22 11:44:49 Christi kernel: da0: 122MB (250879 512 byte sectors: 64H 32S/T 1 22C) Jun 22 11:44:49 Christi kernel: GEOM_LABEL: Label for provider da0s1 is msdosfs/ . Jun 22 11:44:56 Christi kernel: umass0: at uhub4 port 2 (addr 2) disconnected Jun 22 11:44:56 Christi kernel: (da0:umass-sim0:0:0:0): lost device Jun 22 11:44:56 Christi kernel: (da0:umass-sim0:0:0:0): removing device entry Jun 22 11:44:56 Christi kernel: GEOM_LABEL: Label msdosfs/ removed. Jun 22 11:44:56 Christi kernel: umass0: detached I'm sure you can come up with creative ways to write a script that checks for when the disk is detached. "Bono Vince Malum" -- -Camilo > Date: Sat, 21 Jun 2008 21:44:09 + > From: Helge Rohde <[EMAIL PROTECTED]> > Subject: shellscript conditional to check for external disk > To: freebsd-questions@freebsd.org > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="us-ascii" > > Hello List, > > I need to write a backup script, and one of the required > actions would be a > copy of the backup to an external firewire drive. I would > like to make this > as easy as possible for the local staff, so i'd like to > check whether the > drive is attached, if necessary mount it, copy over the > backup and unmount > it again, so that the local staff can swap the external > disks when they're > not used. > > Is there a canonical way to achieve what i want? I played > with the idea of > simply checking for /dev/da0s1d's existance, but that > won't disappear on > disconnect, so that would leave the is a possibility that > although da0 is > in /dev, it might not be connected. > > Any ideas or RTFM-pointers? > > Helge ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: shellscript conditional to check for external disk
Jun 22 11:44:49 Christi kernel: umass0: on uhub4 Jun 22 11:44:49 Christi root: Unknown USB device: vendor 0x0781 product 0x5150 b us uhub4 Jun 22 11:44:49 Christi kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Jun 22 11:44:49 Christi kernel: da0: Removable Direct Access SCSI-2 device Jun 22 11:44:49 Christi kernel: da0: 40.000MB/s transfers Jun 22 11:44:49 Christi kernel: da0: 122MB (250879 512 byte sectors: 64H 32S/T 1 22C) Jun 22 11:44:49 Christi kernel: GEOM_LABEL: Label for provider da0s1 is msdosfs/ . Jun 22 11:44:56 Christi kernel: umass0: at uhub4 port 2 (addr 2) disconnected Jun 22 11:44:56 Christi kernel: (da0:umass-sim0:0:0:0): lost device Jun 22 11:44:56 Christi kernel: (da0:umass-sim0:0:0:0): removing device entry Jun 22 11:44:56 Christi kernel: GEOM_LABEL: Label msdosfs/ removed. Jun 22 11:44:56 Christi kernel: umass0: detached man devd man devd.conf ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
linux-quake4 (short and sweet, again)
Has anyone been able to get linux-quake4 working on FBSD7.0-REL? Useful info: [EMAIL PROTECTED] ~]% uname -rsim FreeBSD 7.0-RELEASE i386 GENERIC [EMAIL PROTECTED] ~]% sysctl -a | grep linux hw.snd.compat_linux_mmap: 0 compat.linux.oss_version: 198144 compat.linux.osrelease: 2.6.16 compat.linux.osname: Linux [EMAIL PROTECTED] ~]% pkg_info -xE linux linux-doom3-1.1.1286,0 linux-expat-1.95.8 linux-flashplugin-9.0r124 linux-fontconfig-2.2.3_7 linux-openssl-0.9.7f linux-quake4-1.4.2,1 linux-sdl-1.2.10,1 linux-xorg-libs-6.8.2_5 linux_base-fc-4_13 [EMAIL PROTECTED] ~]% The problem: [EMAIL PROTECTED] ~]% linux-quake4 /usr/local/lib/quake4/quake4.x86: error while loading shared libraries: /usr/local/lib/libX11.so.6: ELF file OS ABI invalid [EMAIL PROTECTED] ~]% linux-quake4smp /usr/local/lib/quake4/quake4smp.x86: error while loading shared libraries: libSDL-1.2.id.so.0: cannot open shared object file: No such file or directory [EMAIL PROTECTED] ~]% ldd /usr/local/lib/quake4/quake4smp.x86 /usr/local/lib/quake4/quake4smp.x86: libpthread.so.0 => /lib/libpthread.so.0 (0x284da000) libdl.so.2 => /lib/libdl.so.2 (0x284ec000) libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x284f) libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x285c3000) libSDL-1.2.id.so.0 => not found libz.so.1 => /usr/lib/libz.so.1 (0x285d2000) libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x285e5000) libm.so.6 => /lib/libm.so.6 (0x286c2000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x286e8000) libc.so.6 => /lib/libc.so.6 (0x286f2000) /lib/ld-linux.so.2 (0x284bc000) [EMAIL PROTECTED] ~]% ldd seems to indicate the port is hosed: libSDL-1.2.id.so.0 => not found For the record: linux-doom3-1.1.1286,0 runs like silk in here .. so .. it doesn't seem to be an emulation problem. Yet still: linux-quake4 /usr/local/lib/quake4/quake4.x86: error while loading shared libraries: /usr/local/lib/libX11.so.6: ELF file OS ABI invalid, dazzels me ... Any hints, pointers, info, will be greatly appreciated. I want to make sure Im not doing something wrong before e-mailing the maintainer. If the maintainer (Ed Schouten according to the Makefile) is on the list, please feel free to contact me to work and test this =) Thanks :) -- Blessings Gonzalo Nemmi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Which file can I find the error message that shows on the screen when I build my kernel?
Hi: I have make some changes to the kernel files and rebuild the kernel, but when I rebuild the kernel, it show some errors and stop rebuild. The question I want ask is that: Is there any file that store all these error message, If there is, where can I find it? Because there are too many errors occur, I can't see all the errors on the screen, if there is a file that store these error messages, then I can find all the errors and fixed them. Thanks! Best Wishes ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: FreeBSD as VOIP PBX
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 sergio lenzi wrote: > Em Sex, 2008-06-20 às 21:45 +0200, Wojciech Puchar escreveu: > when i connected 56 cisco phones to my laptop (used 4*16 port switches ;), and having all of them working (called from first to second, from third to fourth etc..) there was below 4% CPU load but it's 1200Mhz Pentium-3M. >>> Yes... the cisco uses SIP, that is far more efficient... >>> >> i forget to say - SIP allows direct calls (data goes directly between >> phones), SCCP doesn't (at least asterisk module). >> >> in tests i intentionally disabled this to make asterisk server loaded > > we use sip the same way you do with sccp because we need tranfer calls > (,Tt) in the dial command > E1 boards, the best we tested are from the chinese openvox... > without echo cancelation it seels for about U$750,00 for one port E1, > US$1800 for 2 ports, > US$2800 for 4 ports... My god, for the hardware involved, that's unbelieveably expansive. > in my country (brazil) you may think it is too expensive, but as > you > think that ONE port for a siemens pabx is about US$4000 (yes, 4K > dollars) For the Siemens pabx, you're paying for the switching capability, and the literal ton of software to do all of the call handling. Maybe I got you wrong, in what I read above, I haven't seen those Openvox cards, but if they are only voice interface (a T1 or E1 single channel) plus signally, wow, that's a lot. If the interface an entire group, either T1 or E1, that's better, but it sure includes a healthy kick for a profit factor. I know, I've built them in the past, there's just not THAT much to them. Maybe I'm missing something. Actually, in the present case, the cost of doing switching has dropped in a major way, so the cost, which used to be justifiable at $4k/channel, well, it's certainly not that way any more. Let's see, from memory, I think that the old Northern Telecom DMS250 ran about 2.5 million plus the cost of channel banks, I think. I was always doing engineering, not sales, but your cost figures, they sure do seem high to me. As far as handling the software, the old tandem switches used to use mini-computers to run maybe 4,000 channels in one switch. I forget the name of the most famous tandem switch, but I do know they used a single mini. Today's computers are far more capable, and so could very easily power a whole switch. Course, doing that kind of software, well, it's the most difficult stuff to do that has ever been accomplished. The folks that did it never got enough credit. > you may imagine that for the price of only one board for a siemens you > can mount > the pbx, the cpu, the FreeBSD. > > you mount a 100 phones pbx for less than half the price of a siemens > equipment > including the 50 ATAs linksys pap2. > > The poor the country, the more you pay that is the rule. > > Philips, nortel, alcatel are even more expensive.. > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFIXpYvz62J6PPcoOkRAsZoAKCDFT6zyX43pSZkSDC1xv3xsYsMXACfZQvq TsB0dr9vQN6+03TVyGl9mA0= =oUqG -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Which file can I find the error message that shows on the screen when I build my kernel?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 [EMAIL PROTECTED] wrote: > Hi: > I have make some changes to the kernel files and rebuild the kernel, but > when I rebuild the kernel, it show some errors and stop rebuild. The > question I want ask is that: Is there any file that store all these error > message, If there is, where can I find it? > Because there are too many errors occur, I can't see all the errors on the > screen, if there is a file that store these error messages, then I can > find all the errors and fixed them. > Thanks! > Best Wishes Not zutomatically. When I run builds, I save rthe output. I normally do this in tcsh, so the command here is make |& tee makeout where the complete ooutput goes into the "makeout" file. The "&" there doesn't take it's normal meaning of throwing the task into the background, instead, what it does is to capture both the regular output plus the stderr output. If you don't use it, you'll get the listing UNTIL the error, and it won't register the error, so don't forget it, nor change it's placement. This can also be done in sh shell, but I'm not used to using the sh syntax for that (both piping and tossing the stdout with stderr), so if you need that, I will let someone else tell you how to do that. Be wary of the fact that, that makeout file's gonna be LARGE. Several megs in size. > > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFIXpdUz62J6PPcoOkRAhfLAJ0Zis2ahvh+Gto8u2eJt/vSkJwZugCfUgrK tEfIlZMl6A2YSTJJqPKOhQA= =GHLz -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Which file can I find the error message that shows on the screen when I build my kernel?
On Sunday 22 June 2008 15:03:33 [EMAIL PROTECTED] wrote: > Hi: > I have make some changes to the kernel files and rebuild the kernel, but > when I rebuild the kernel, it show some errors and stop rebuild. The > question I want ask is that: Is there any file that store all these error > message, If there is, where can I find it? > Because there are too many errors occur, I can't see all the errors on the > screen, if there is a file that store these error messages, then I can > find all the errors and fixed them. > Thanks! > Best Wishes The Best of FreeBSD Basics by Dru Lavigne; pg43/44; Reed Media Services open your terminal and issue: "csh -i | tee nameoffile" what does that mean? well .. youll get a new prompt and everything that goes on, on that propmt, will be piped to "tee" which will "record everything" on "nameoffile" When done, press Ctrl-D then "cat nameoffile" to view your session. Example: You can often get answers to your questions about FreeBSD by searching in the FreeBSD mailing list archives at http://www.FreeBSD.org/search/search.html [EMAIL PROTECTED] ~]% csh -i | tee recording To read a compressed file without having to first uncompress it, use "zcat" or "zmore" to view it. -- Dru <[EMAIL PROTECTED]> [EMAIL PROTECTED] ~]% cd /usr/ports/ [EMAIL PROTECTED] /usr/ports]% make quicksearch name=linux-doom3 Port: linux-doom3-1.3.1.1304,1 Path: /usr/ports/games/linux-doom3 Info: Doom III for Linux Port: linux-doom3-demo-1.1.1286_1 Path: /usr/ports/games/linux-doom3-demo Info: DOOM III demo for Linux [EMAIL PROTECTED] /usr/ports]% exit [EMAIL PROTECTED] ~]% cat recording To read a compressed file without having to first uncompress it, use "zcat" or "zmore" to view it. -- Dru <[EMAIL PROTECTED]> [EMAIL PROTECTED] ~]% cd /usr/ports/ [EMAIL PROTECTED] /usr/ports]% make quicksearch name=linux-doom3 Port: linux-doom3-1.3.1.1304,1 Path: /usr/ports/games/linux-doom3 Info: Doom III for Linux Port: linux-doom3-demo-1.1.1286_1 Path: /usr/ports/games/linux-doom3-demo Info: DOOM III demo for Linux [EMAIL PROTECTED] /usr/ports]% exit [EMAIL PROTECTED] ~]% That's way better to store just the error messages (which can be easily redirected STDERR to a file using ">& nameoffile" under csh or "2> nameoffile" under bash) beacause you'll be recording your whole sessions instead of just the errors ;) Now be a good citizen, go to freebsdmall.com, buy the book and subscribe to Freebsd starting with version 7.0 ... ;) Thanks Dru, for your book sits on besides my computer now, and it will not move from there for a really long time :) Hope it helps :) -- Blessings Gonzalo Nemmi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Which file can I find the error message that shows on the screen when I build my kernel?
On Sunday 22 June 2008 15:17:56 Chuck Robey wrote: > make |& tee makeout > > where the complete ooutput goes into the "makeout" file. The "&" there > doesn't take it's normal meaning of throwing the task into the background, > instead, what it does is to capture both the regular output plus the stderr > output. If you don't use it, you'll get the listing UNTIL the error, and > it won't register the error, so don't forget it, nor change it's placement. I wasn't aware of the use of "&" ! I thought that getting a new interactive shell would force tee to record errors too, as it was supposed to record the whole thing, not leaving anything out (the errors in this case =P) Thanks a lot for the tip Chuck ! -- Blessings Gonzalo Nemmi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Which file can I find the error message that shows on the screen when I build my kernel?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Gonzalo Nemmi wrote: > On Sunday 22 June 2008 15:17:56 Chuck Robey wrote: >> make |& tee makeout >> >> where the complete ooutput goes into the "makeout" file. The "&" there >> doesn't take it's normal meaning of throwing the task into the background, >> instead, what it does is to capture both the regular output plus the stderr >> output. If you don't use it, you'll get the listing UNTIL the error, and >> it won't register the error, so don't forget it, nor change it's placement. > > I wasn't aware of the use of "&" ! > > I thought that getting a new interactive shell would force tee to record > errors too, as it was supposed to record the whole thing, not leaving > anything out (the errors in this case =P) > > Thanks a lot for the tip Chuck ! There's an app somewhere in ports that will catch some programmable amount of a file (like maybe 1K bytes) and keep this amount as the file keeps writing in and out. That way you can easily catch the most important part only, and toss the rest. It'd be a nice project for anyone new to C, not too difficult. Alterntiavely, you could set it to toss all lines until it notices the work "error" (in upper, lower, or mixed case), whereupon, it switches to saving all. Would be a nice app, but it's there in ports already somewhere. For along time, used only tcsh, under the mistaken belief that you couldn't redirect stderr for piping, under a sh-like shell, but about 6 months ago, I found out how to do that. If you would rather use a sh-like shell (maybe you'd be one of the bash-aficionados?) tell me, I will hunt up that trick. -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.4 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFIXrOLz62J6PPcoOkRAp2wAJ9XH39bz5QFD5tYOE3pIfjkVV+9EACfZhCe D6YvWJHo363S0oFPEP4x9hc= =AHRa -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
xfce on amd64 not working
All, My (relatively) newly purchased Thinkpad T61 (type 7658-CTO) with 4g RAM is running 7.0-STABLE amd64 from June 8. I've gotten Xorg running from a generic xorg.conf generated by 'Xorg -configure', with startx, but when starting XFCE4 with xtartxfce, it is not happy, and bombs out, leaving a message in /var/log/messages: kernel: PID 92xxx (xfwn), uid 0: exited on signal 11 (core dumped) I've csup'ed today, and did 'portupgrade -aRr' to get the latest. I also tried copying the xorg.conf from the Suse install that I'm dual booting with, but that's not any help. Any thoughts? Kurt ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
difference between loading kernel module during boot and after boot manually?
Hi everybody, is there a difference between loading a kernel module during the boot process and loading a module manually after the login? I'm asking this on a general basis and because of pr: kern/123563. I don't know if it's a problem with if_re because I can't find someone out on the net having the same problem. The driver if_re works after laoding it manually after the login and I have no problems with it after this manual kldload if_re. Can you guys give me a hint how to get further with the troubleshooting because I can't find any difference with pciconf or the boot -v messages. Pyun did a nice job with if_re and shame on me for making his driver responsible at first but that's the only driver I can reproduce this problem with so I don't know if there's a hardware / driver / base issue. The facts about my configuration etc. is in http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/123563 If you want more information please write me. Thanks and kind regards, Vincent ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xfce on amd64 not working
On Sun, Jun 22, 2008 at 3:31 PM, Matthew Donovan <[EMAIL PROTECTED]> wrote: > On Sun, Jun 22, 2008 at 02:48:45PM -0700, Kurt Buff wrote: >> All, >> >> My (relatively) newly purchased Thinkpad T61 (type 7658-CTO) with 4g >> RAM is running 7.0-STABLE amd64 from June 8. >> >> I've gotten Xorg running from a generic xorg.conf generated by 'Xorg >> -configure', with startx, but when starting XFCE4 with xtartxfce, it >> is not happy, and bombs out, leaving a message in /var/log/messages: >> >> kernel: PID 92xxx (xfwn), uid 0: exited on signal 11 (core dumped) >> >> I've csup'ed today, and did 'portupgrade -aRr' to get the latest. >> >> I also tried copying the xorg.conf from the Suse install that I'm dual >> booting with, but that's not any help. >> >> >> Any thoughts? >> >> Kurt > > Well it's not an Xorg problem. consoidering it's xfwn that is being dumped. > It'd be easier if we could see the core that xfwn actually dumped since > that leads to a bit more clues on why it cored. Happy to provide it, but I don't have a web site to which I can post it. gzipped, it's about 120k. I'll attach it, and hope it gets through. Kurt ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Quotation Needed...
Greetings, I want to sell some puppy and I want to list the ad in your newspaper. Below is the text of the ad: CUTE ENGLISH BULLDOGS, PURE BREED, MALE AND FEMALES AVAILABLE WITH PICTURES, 10 WEEKS, PRICE $650 (SHIPPING INCLUDED), FOR MORE DETAILS, CALL OR EMAIL [EMAIL PROTECTED] I can add my phone number number to the text if that is required. I want this ad to run for 8 weeks. I would like to have the quotation for the ad and the first available start date for the ad. I would make the payment with my credit card. Regards. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xfce on amd64 not working
On Sun, Jun 22, 2008 at 02:48:45PM -0700, Kurt Buff wrote: > All, > > My (relatively) newly purchased Thinkpad T61 (type 7658-CTO) with 4g > RAM is running 7.0-STABLE amd64 from June 8. > > I've gotten Xorg running from a generic xorg.conf generated by 'Xorg > -configure', with startx, but when starting XFCE4 with xtartxfce, it > is not happy, and bombs out, leaving a message in /var/log/messages: > > kernel: PID 92xxx (xfwn), uid 0: exited on signal 11 (core dumped) > > I've csup'ed today, and did 'portupgrade -aRr' to get the latest. > > I also tried copying the xorg.conf from the Suse install that I'm dual > booting with, but that's not any help. > > > Any thoughts? > > Kurt > ___ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" Well it's not an Xorg problem. consoidering it's xfwn that is being dumped. It'd be easier if we could see the core that xfwn actually dumped since that leads to a bit more clues on why it cored. pgpwJRBBIFHOv.pgp Description: PGP signature
please don't shoot me , but... [YAOTP]
people, yes, this is yet another off-topic post,, but 1) i can't find where to post on the GIMP list [or forum], 2), can't find anything that makes sense to my way of thinking. how, oh how, do i use these gimp 'layers'?? 2 uses for them. 1st is to create the string "jottings.thought.org" in a LARGE typeface, centered; then a 2nd string in a Medium typeface, also centered, and a 3rd in a small typeface. everything centered. i figure that whenever somebody unlocks my cage, i may as well make up T-shirts and be my own billboard. i spend a solid 1.5 days trying to learn what the deal is with 'layers': no-joy. the second reason to learn gimp is to manipulate plain old ascii letters (or maybe 8859-15 to get the upside-down bang "!". when i first started this site in wisconsin i called it 'thought unlimited' and it served as a public access unix site for years. public Access or Service, i've kept the 'thought unlimited' tag. now if i knew how to use gimp+layers, i might be able to creaate a logo-with-letters. i know 0.00 about art. at the same time, i love fonts; this is IMHO, a true artform. and i'm like to try and design "TU!" on some-such using gimp to create a logo from letters. thanks in advance, gary -- Gary Kline [EMAIL PROTECTED] www.thought.org Public Service Unix http://jottings.thought.org http://transfinite.thought.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
core Dumb during CVSUP
I have up untill recently been able to do cvsup np's at all, now all of a sudden it core dumps, any thoughts welcome.. Connecting to cvsup.au.freebsd.org Connected to cvsup.au.freebsd.org Server software version: SNAP_16_1h Negotiating file attribute support Exchanging collection information Establishing multiplexed-mode data connection Running Bus error (core dumped) -- No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.4.1/1513 - Release Date: 22/06/2008 7:52 AM ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Help me to building of " ppp.conf " file
Hi all. I want adapt my Internet service to FreeBSD 7.0, and I need to building the "etc/ppp/ppp.conf" file, but, I do not have much experience in FreeBSD, Can you Help me? I have a Windows XP file, maybe, it is useful as example. I hope, you can help me. Note: My English is not good, i speak Spanish. Best Regards, Miguel. P.S.: Here my file example: ** [GENERAL] Company_Name = Movilnet CCU550 Registry_Folder = MovilnetCCU_550 Install_Directory = Movilnet\CCU550 SWVersion = Software Version : 1.1.6.20(CCU-550) Copyright = Copyright (c) 2006 Franklin Wireless Corp. About_FirmwareVersion = Firmware Version : About_Title = CCU-550 Modem EvDO Info(CCU-550) ;;; ;;0-None, 1-Exist UIMCARD = 0 ;;; ;;;0 - None, 1-RM3 , 2-Reverse RM3 RM3 = 1 ;;; ;;;EVDO-5500P(PCMCIA), EVDO-5500U(USB) Product_Name = CCU-550 Modem EvDO Product_Name_SPA = CCU-550 Modem EvDO DialUP_ConnectionName = CCU-550 Modem EvDO Connection ;;; ;;;Select Language SelectLang = ENGLISH ;;; ;;;PCMCIA, USB, MODEM DriverKind = USB ;;; ;;;Open Port Modem Name - default - not use OpenPortModemName = 1 ;;; ;;Only DriverKind = MODEM ModemPort = ;;; ;;Port Kind (SINGLE or MULTI) PORT_KIND = MULTI ;;; ;;Vid_05c6&Pid_3196 ;;CMOTECH-5100P-6944 ;;VID_05C6&PID_3100 DriverID = Vid_16d8&Pid_5533&Mi_00 DriverID_DM = Vid_16d8&Pid_5533&Mi_02 SWVer = MainProgramName = CMOCCU.exe CHINESE_HelpFile = chhelp.chm HelpFile = help.chm ;;; ; Use NAM NAME for LCD 0:no use , 1:use, default:use UseNAMNAME = 1 ;;; ;;;CMTNF5500P.exe(PCMCIA), CMTNF5500U.exe(USB) DetectorProgrameName = CMTNF5500D.exe TitleName = CCU-550 Modem EvDO AutoRun = 0 ; ;;; On(1)/Off(0) ATCommandActiveSend = 1 ; ;;; Hybrid --> EVDO Data Call : Outgoing call(Active) On(1)/Off(0) ATCommandOutgoing = 1 ; ;ShortCuts Name Shortcuts_DeskTop = CCU-550 Modem EvDO Shortcuts_Programs = CCU-550 Modem EvDO Shortcuts_Programs_Execute = CCU-550 Modem EvDO Shortcuts_Programs_Help = CCU-550 Modem EvDO User Manual Shortcuts_Programs_Uninstall = UnInstall CCU-550 Modem EvDO Shortcuts_DeskTop_SPA = CCU-550 Modem EvDO Shortcuts_Programs_SPA = CCU-550 Modem EvDO Shortcuts_Programs_Execute_SPA = CCU-550 Modem EvDO Shortcuts_Programs_Help_SPA = Manual de usuario del CCU-550 Modem EvDO Shortcuts_Programs_Uninstall_SPA = Desinstalar CCU-550 Modem EvDO ;; ;;Main_No_SRV check count No_SRVCheckCnt = 5 ;;;Voice function ON(1)/OFF(0) ;;default -> on VoiceFuction = 0 ;;;Offline Display function ON(1)/OFF(0) ;;default -> off OfflineFct = 0 ; Only Data~~~! default - 0 OnlyData = 1 ; packet amount 0:byte, 1:kbyte, 2:mbyte, 3:gbyte PacketAmount = 1 ; kind of minimize 0:minimize, 1:hidedefault:minimize KindOfMinimize = 1 ; Using changeable tray icon 0:no use, 1: changeabledefault:no use ChangeableTrayIcon = 1 ; ;;Active SMS Send ON(1)/OFF(0) ActiveSMSSend = 1 ;;; ;SMS Max String SmsMaxString = 160 SmsRcvMaxString = 230 ;;SMS UNICODE ~! USE(1)/UNUSE(0) SmsUnicode = 0 ;; ;;sms emergency priorty OFF(0) / Normal (1) Fast (2) Urgent(3) - default SmsEmergency = 0 ;
Re: please don't shoot me , but... [YAOTP]
Gary Kline <[EMAIL PROTECTED]> wrote: > yes, this is yet another off-topic post,, but 1) i can't find where to > post on the GIMP list [or forum], 2), can't find anything that makes > sense to my way of thinking. > > how, oh how, do i use these gimp 'layers'?? [...] Your initial intuition was spot on; please don't post these type of questions on this list. Thanks. -- Sahil Tandon <[EMAIL PROTECTED]> ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Webmin 1.370_2 weird Error
Hi MailingList, I have install a webmin 1.370_2 in my VM freebsd server, the installation had no problem but when i view the UI (in my browser i type 192.168.23.248:1) of my webmin, I have these weird problem in front of the page of my webmin: /usr/local/lib/webmin/mount/freebsd-mounts-5.c: In function 'main': /usr/local/lib/webmin/mount/freebsd-mounts-5.c:18: warning: incompatible implicit declaration of built-in function 'exit' /usr/local/lib/webmin/mount/freebsd-mounts-5.c: In function 'expand_flags': /usr/local/lib/webmin/mount/freebsd-mounts-5.c:34: warning: incompatible implicit declaration of built-in function 'strcat' /usr/local/lib/webmin/mount/freebsd-mounts-5.c:38: error: 'MNT_NODEV' undeclared (first use in this function) /usr/local/lib/webmin/mount/freebsd-mounts-5.c:38: error: (Each undeclared identifier is reported only once /usr/local/lib/webmin/mount/freebsd-mounts-5.c:38: error: for each function it appears in.) /usr/local/lib/webmin/mount/freebsd-mounts-5.c:48: warning: incompatible implicit declaration of built-in fun I don't understand this error, infact i have installed many time a webmin in other server, this is my first time I encounter this.. Could some one explain to me what is this? Cheers ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Portsnap behind proxy squid not update
>> I have a proxy (squid) that gives Internet to a set of pcs, one of >> them is a FreeBSD 6.2, when wanting to upgrade ports ( >> portsnap fetch) gives me the messages following: >> >> PC1 # fetch portsnap > > Did you mean (and actually type) 'portsnap fetch'? > I wrong to write >> But I fail to upgrade ports, then modify the >> file. cshrc and leave it well >> # ee. cshrc >> setenv HTTP_PROXY http://10.0.1.1:3128 > > No need to specify the port in your case; 3128 is default for HTTP_PROXY. > Does your proxy server require authentication? If so, you need to specify > authorization parameters as outlined in man fetch(3). > >> setenv FTP_PROXY ftp://10.0.1.1:3128 >> setenv FTP_PASSIVE_MODE ftp://10.0.1.1:3128 > My proxy not require authentication. > BTW, although FTP_PASSIVE_MODE is enabled by setting it to anything other > than 'no', you probably want to set it to something logical like "YES" > instead of just re-listing the proxy URL. :-) > Sorry, I do not understand ( I am using a tool Translation ) Meet as debug to solve the problem? Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
shared object "libc.so.6" not found after freebsd-update
I was using freebsd-update to upgrade from 6.2 to 7.0-RELEASE. The upgrade and install of the kernel went fine, then I reran freebsd-update after rebooting to get the userland stuff. Midway through installing updates, I got the error: Installing updates.../libexec/ld-elf.so.1: Shared object "libc.so.6" not found, required by "rm" There's a libc.so.7 in /lib. I'd try linking to it, but ln of course requires libc. Without libc, almost nothing works... can someone guide me through how to recover a functional libc and finish updating (without breaking everything)? I was following the instructions at http://www.freebsd.org/releases/7.0R/announce.html. Was there some step missing that would have prevented this mess? Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: shared object "libc.so.6" not found after freebsd-update
Hello, I'm not certain of the following. I think you needed to update to 6.3 first and after the first update, install compat6x. Regardless, you may be able to recover by doing 'freebsd-update rollback'. That will undo the most recent changes and hopefully get you a working system. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Patch Failures during Portupgrade
Below is the hunk of ports that continually fail to upgrade due to problems with patching. i use the command portupgrade -aDkp -m BATCH=yes Any assistance with this greatly appreciated. ** Listing the failed packages (-:ignored / *:skipped / !:failed) ! lang/ruby18 (ruby-1.8.6.111_1,1) (patch error) ! databases/mysql50-client (mysql-client-5.0.45_1) (patch error) ! graphics/OpenEXR (OpenEXR-1.6.0) (patch error) ! devel/libvolume_id (libvolume_id-0.75.0_1) (patch error) ! graphics/dri (dri-7.0.1,2) (install error) ! net/samba-libsmbclient (samba-libsmbclient-3.0.28) (patch error) ! graphics/libGLU (libGLU-7.0.1) (patch error) ! x11-fonts/xfs (xfs-1.0.5,1) (patch error) ! x11/xorg-libraries (xorg-libraries-7.3_1) (unknown build error) ! x11-toolkits/gtk20 (gtk-2.12.1_1) (patch error) ! irc/xchat (xchat-2.8.4_3) (patch error) ! sysutils/hal (hal-0.5.8.20070909) (configure error) ! x11/kdebase3 (kdebase-3.5.8) (patch error) ! x11-servers/xorg-server (xorg-server-1.4_3,1) (patch error) ! x11-drivers/xorg-drivers (xorg-drivers-7.3) (uninstall error) ===> Patching for ruby-1.8.6.111_2,1 ===> Applying FreeBSD patches for ruby-1.8.6.111_2,1 Ignoring previously applied (or reversed) patch. 1 out of 1 hunks ignored--saving rejects to ext/tk/tkutil/extconf.rb.rej => Patch patch-ext_tk_tkutil_extconf.rb failed to apply cleanly. *** Error code 1 Stop in /usr/ports/lang/ruby18. *** Error code 1 Stop in /usr/ports/lang/ruby18. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Which file can I find the error message that shows on the screen when I build my kernel?
Chuck Robey wrote: For along time, used only tcsh, under the mistaken belief that you couldn't redirect stderr for piping, under a sh-like shell, but about 6 months ago, I found out how to do that. If you would rather use a sh-like shell (maybe you'd be one of the bash-aficionados?) tell me, I will hunt up that trick. Under Bourne-style shells: make 2>&1 | tee /tmp/makeout TIMTOWTDI. Under any shell: script /tmp/makeout make Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW signature.asc Description: OpenPGP digital signature
