Re: [gentoo-user] I want to configure an email server
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hey there, thanks for the tip! I didn't expect to find a complete HOWTO, as I said, but then again I've never seen a HOWTO that big. Question, though. Do I need to do anything very special to use MySQL instead of PGSQL? You just have to do what they say in the Howto for PgSQL for MySQL, it's the same thing. A sed -e 's|pgsql|mysql|ig' on this Howto might be sufficient :) Thanks again, - --- danthehat ;)[EMAIL PROTECTED] wrote: Hello ! I advise you to take a look at http://gentoo-wiki.com/HOWTO_Email:_A_Complete_Virtual_System . I've used this howto to make my email server and all works fine now. It's composed of Postfix + Spamassassin + SQLGrey + ClamAV coupled with MySQL database for me or PGSQL as in the howto. Regards, Xavier Parizet http://www.linuxant.fr/ -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 But I have no idea where to start. Frankly, so many possibilities and incredibly complex setups have deterred me somewhat from embarking on this venture. However, I would very much like to have my very own email server under my own domain name. So what I'm asking you guys for is documentation, software packages, recommended setups, anything you can add. I am not looking for an all in one HOWTO (and don't really expect to find one with such a complicated process) and I am willing to RTFM when necessary. Thanks a lot guys. - - -- danthehat ;) -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGR4bN5vsIjOKjGzwRAjnWAJsHcgVriudJJtbJ6L04Xi3FEwG2iQCg7U+4 fOd8dzvi14gIcHsLuGRVXzs= =r01T -END PGP SIGNATURE- -- [EMAIL PROTECTED] mailing list -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGR5QS5vsIjOKjGzwRAsrfAKCCT0H6mLeY8DfmEv5b0GTs+KWKRACgw+T+ vIj8HqCMNUsa7vK8+DIFNhM= =kjJq -END PGP SIGNATURE- -- [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
[gentoo-user] Getting Started
I am new to Gentoo, and working on getting things up and going. I am running an HP Pavilion with an Athlon 64 processor. I'll build a desktop eventually when I have the time, but for now this is it. I am attempting to install the x86 version of Gentoo from the i686 stage3 tarball, and so far have had no luck getting the ATI video drivers to compile. (My reason for this is that I wish to be able to run the current version of blender, which seems to have issues under AMD64 at this time.) However, if I do a networkless install, it works fine, but there are strange issues with upgrading. Portage has no love for a synthesized system. :P Anyway, I will probably post actual error messages in the near future if I can't figure it out myself. In the mean time, I'm wondering how many people on the list are military or retired military living in the pacific AOR (especially Kanto). If you want you can respond directly on this one. ^_^ I'm not asking to fill the list with the info! Hehe. Also, what is the difference between the Gentoo LiveCD and the LiveDVD? What are the advantages of the DVD? I am considering downloading it if there is adequate benefit. --- Ken. -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Panic at boot time after update kernel to 2.6.20-r8.
Graham Murray wrote: Did you select AHCI mode in the BIOS? On my motherboard (with ICH6R/IC6RW) there is an option to set SATA mode to IDE, RAID or AHCI. The item is there in the BIOS but only has one setting available - IDE. :( Seems my chipset is one of those that doesn't support AHCI. lspci reports this: 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) The motherboard is an Asus P5LD2-VM. Be lucky, Neil -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Getting Started
On 5/14/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Also, what is the difference between the Gentoo LiveCD and the LiveDVD? What are the advantages of the DVD? I am considering downloading it if there is adequate benefit. AFAIK LiveDVD Just contains more distfiles and packages. My suggestion is not use networkless install. Keep in sync. -- Vladimir Rusinov GreenMice Solutions: IT-решения на базе Linux http://greenmice.info/
Re: [gentoo-user] remote ssh session does not reflect my keyboard inputs
On Sunday 13 May 2007 23:10, Etaoin Shrdlu wrote: On gentoo, bash does not read /etc/inputrc, but perhaps on ubuntu it does. Correction: it DOES read it on gentoo too. Sorry for the wrong info. -- [EMAIL PROTECTED] mailing list
RE: [gentoo-user] Re: I copied a Gentoo VM and now networking doesn't work.
It had nothing to do with the copying. It's the annoying udev rules stuff, it freakin' figures out everything else in your system, but the MAC is static or something. Edit this file: /etc/udev/rules.d/70-persistent-net.rules Change your MAC to the one that VMWare assigned the VM. You can find this in the .vmx file (amongst other ways) -Original Message- From: news [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, May 12, 2007 12:58 PM To: gentoo-user@lists.gentoo.org Subject: [gentoo-user] Re: I copied a Gentoo VM and now networking doesn't work. Boyd Stephen Smith Jr. [EMAIL PROTECTED] writes: On Wednesday 09 May 2007 02:55:42 Daevid Vincent wrote: I have a Gentoo VM that I've used for years (XP Host. Workstation 5.5.3). Works great. I copied the .vmdk and .vmx files to a new directory called LAMP. I edited the .vmx file changing the appropriate paths. Now when I start the new VM, my networking fails. (I changed nothing inside the linux VM). ifconfig eth0 says: eth0: error fetching interface information: Device not found Check for other devices. udev now establishes persistent network device names based on MAC address (unless you add some of your own rules). It's very likely that the MAC address of the virtual device changed, and the new device is eth1 (or higher). To original poster Daevid Vincent: I'm curious to know if Boyd's suggestion helped. I had the same problem a while back. But since I was experimenting and didn't really need the clone I'd made I ditched it. Wondering now if I just needed to look for eth1 or higher. -- [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] pppconfig can't find internal modem.
On Sunday 13 May 2007 21:18, [EMAIL PROTECTED] wrote: My ADSL connection had a short outage yesterday. I discovered, to my consternation, that my machine's internal modem wasn't being picked up. Was this working before then - e.g. since the last time you compiled your kernel? In any case you would probably want to (r)emerge the driver for this modem. -- Regards, Mick pgpDR02X44hhr.pgp Description: PGP signature
RE: [gentoo-user] Getting Started
Do you have any advice for making sure that the Xorg install is successful? Seems to always die during the compile process for the ati driver. ^^;; -Original Message- From: Vladimir Rusinov [mailto:[EMAIL PROTECTED] Sent: Monday, May 14, 2007 4:21 PM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] Getting Started On 5/14/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Also, what is the difference between the Gentoo LiveCD and the LiveDVD? What are the advantages of the DVD? I am considering downloading it if there is adequate benefit. AFAIK LiveDVD Just contains more distfiles and packages. My suggestion is not use networkless install. Keep in sync. -- Vladimir Rusinov GreenMice Solutions: IT-решения на базе Linux http://greenmice.info/
Re: [gentoo-user] Getting Started
Am Montag 14 Mai 2007 08:46 schrieb [EMAIL PROTECTED]: I am new to Gentoo, and working on getting things up and going. I am running an HP Pavilion with an Athlon 64 processor. I'll build a desktop eventually when I have the time, but for now this is it. I am attempting to install the x86 version of Gentoo from the i686 stage3 tarball, and so far have had no luck getting the ATI video drivers to compile. (My reason for this is that I wish to be able to run the current version of blender, which seems to have issues under AMD64 at this time.) However, if I do a networkless install, it works fine, but there are strange issues with upgrading. Portage has no love for a synthesized system. :P Anyway, I will probably post actual error messages in the near future if I can't figure it out myself. In the mean time, I'm wondering how many people on the list are military or retired military living in the pacific AOR (especially Kanto). If you want you can respond directly on this one. ^_^ I'm not asking to fill the list with the info! Hehe. Also, what is the difference between the Gentoo LiveCD and the LiveDVD? What are the advantages of the DVD? I am considering downloading it if there is adequate benefit. --- Ken. Hi Ken! As long as you've got a decent Internet connection there is no real reason for using the LiveDVD. I don't know how good the new 2007.0 is. 2006.1 was a real pain. However, if you want the system up and going really quick, it might be worth a try since you can use more precompiled packages from the DVD. Back to your ATI issue: At first, I'd like to make sure you've followed some good howtos. Just take a look to this site if there is a guide to your laptop [1]. If not, you can follow this one [2]. [1] http://tuxmobil.org/hp.html [2] http://gentoo-wiki.com/HOWTO_ATI_Drivers Regards Florian Philipp pgpp32GWOpymC.pgp Description: PGP signature
[gentoo-user] Force app to use specific outgoing ip address?
I have a gateway machine with a single NIC but several virtual IP addresses. I have several instances of apache running, each bound to listen on their own virtual IP address. All the instances of apache are running in proxy mode. What is happening now is that all the apache instances use the 'main' IP address for all outgoing connections. What I would like is for each instance of apache to use their own virtual IP address for outgoing connections. Is it possible to rig iptables to achieve this? And how would I do this? NB I'm open to solutions using proxies other than apache. thanks -- Crayon -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] iptables configuration problem
Chuanwen Wu wrote: I have tried set all the gw in my subnet to 192.168.1.254 or 192.168.1.1. Is't all right? I don't know, it depends on what's your gw's IP is. Let's say you have this setup: GW: 192.168.1.1 Other PCs are: 192.168.1.2... 192.168.1.3... and so on. On the GW you need: echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o ethX -j MASQUERADE (note: change ethX by the NIC your internet connection is on. If your cablemodem/adsl/whatever is on eth3 -for example- change ethX to eth3) On the others PC you need to set GW to 192.168.1.1 I hope this helps. Best regards, Norberto -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] iptables configuration problem
2007/5/14, Norberto Bensa [EMAIL PROTECTED]: Chuanwen Wu wrote: I have tried set all the gw in my subnet to 192.168.1.254 or 192.168.1.1. Is't all right? I don't know, it depends on what's your gw's IP is. Let's say you have this setup: GW: 192.168.1.1 Other PCs are: 192.168.1.2... 192.168.1.3... and so on. On the GW you need: echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o ethX -j MASQUERADE (note: change ethX by the NIC your internet connection is on. If your cablemodem/adsl/whatever is on eth3 -for example- change ethX to eth3) On the others PC you need to set GW to 192.168.1.1 I hope this helps. Best regards, Norberto Thank you!I think i have done what you meant. Here is the information: /etc/conf.d/net in the server config_eth0=( 202.114.10.134 netmask 255.255.255.0 brd 202.114.10.255 ) routes_eth0=( default gw 202.114.10.129 ) config_eth1=( 192.168.1.63 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth1=( default gw 192.168.1.1 ) /etc/conf.d/net in one PC config_eth0=( 192.168.1.35 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth0=( default gw 192.168.1.1 ) -- wcw -- [EMAIL PROTECTED] mailing list
[gentoo-user] lots of broken/missing dependencies when starting w/ stage1
Hi folks, after my notebook disk died, I started completely afresh with the newest stage1 (running within some bit aged knoppix). I remembered installing from stage1 quite easy: edit make.conf etc, run bootstrap.sh and then begin to emerge all your packages. But this didn't work: there seem to be many version and dependency problems. I should have wrote evrything down, I can't remember them all ... For example, openssh failed because openssl was missing. And emerge did not make any attempt to install it. So obviously the dependency is missing. In fact the ebuild file does not contain any dependency on openssl. Another critical error was the toolchain killing itself. After installing the new gcc for my target (stage1 comes w/ *i486*, I set *i686* in make.conf), it wanted the binutils for that platform, which were missing. So I had to copy them from *i486* to be able to at least build the binutils. There were a lot of other problems which may be caused by those I described above. cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] lots of broken/missing dependencies when starting w/ stage1
Hello On Mon, May 14, 2007 at 02:05:39PM +0200, Enrico Weigelt wrote: after my notebook disk died, I started completely afresh with the newest stage1 (running within some bit aged knoppix). What I remember is that stage1 is no longer supported and is for developers only. Theoretically, you can take i386, set your host to i686 and rebuild all, and you will get the same result. -- There is one difference between linux and windows. With windows, you pay for the software, but you get all the T-shirts for free. With linux, you get all the software for free, but you buy the T-shirts. Michal vorner Vaner pgpNu2IeId8aD.pgp Description: PGP signature
[gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
Yet another error: While building coreutils, it fails when making tests/sort: Can't locate auto/POSIX/assert.al There's no assert.al nor an assert.pl file on my disk. cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
[gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
* Enrico Weigelt [EMAIL PROTECTED] wrote: Yet another error: While building coreutils, it fails when making tests/sort: Can't locate auto/POSIX/assert.al There's no assert.al nor an assert.pl file on my disk. Obviously the tests fail. Is there any way to skip them (without touching the ebuild file) ? IMHO, on normal installations (non-dev), they shouldn't be needed at all. cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] lots of broken/missing dependencies when starting w/ stage1
* Michal 'vorner' Vaner [EMAIL PROTECTED] wrote: Hi, What I remember is that stage1 is no longer supported and is for developers only. Theoretically, you can take i386, set your host to i686 and rebuild all, and you will get the same result. I had to take stage1, since the others require kernel 2.6. kernel. But my (some bit aged) knoppix boot cd is still on 2.4. I'm not in office now and don't have an burner available, otherwise I'd taken an recent gentoo install cd. cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
RE: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
If the tests are failing, then perhaps they are needed even more. Also, if you are building from a stage1, you are not dealing with non-dev builds at all. ^^;; -Original Message- From: Enrico Weigelt [mailto:[EMAIL PROTECTED] Sent: Monday, May 14, 2007 9:27 PM To: gentoo-user Subject: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1 * Enrico Weigelt [EMAIL PROTECTED] wrote: Yet another error: While building coreutils, it fails when making tests/sort: Can't locate auto/POSIX/assert.al There's no assert.al nor an assert.pl file on my disk. Obviously the tests fail. Is there any way to skip them (without touching the ebuild file) ? IMHO, on normal installations (non-dev), they shouldn't be needed at all. cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
On Monday 14 May 2007 13:27, Enrico Weigelt wrote: * Enrico Weigelt [EMAIL PROTECTED] wrote: Yet another error: While building coreutils, it fails when making tests/sort: Can't locate auto/POSIX/assert.al There's no assert.al nor an assert.pl file on my disk. Obviously the tests fail. Is there any way to skip them (without touching the ebuild file) ? I have not seen a --no-test flag in emerge, but don't know if there is an undocumented option for this, or if it can be set as an ENV variable. There should be no harm in trying, but first someone more knowledgeable in the workings of gentoo better advise. -- Regards, Mick pgp4fIHNYgSRZ.pgp Description: PGP signature
Re: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
* [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Hi, If the tests are failing, then perhaps they are needed even more. No, the tests fail because some perl modules are missing, which are required to run the tests, but not for coreutils itself. cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
On Mon, 14 May 2007 14:44:55 +0200, Enrico Weigelt wrote: No, the tests fail because some perl modules are missing, which are required to run the tests, but not for coreutils itself. If the test is optional then FEATURES=-test should skip it. -- Neil Bothwick ** I'm not going to get married again ** ** I'll just find a woman I don't like and give her a house ** signature.asc Description: PGP signature
Re: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
* Neil Bothwick [EMAIL PROTECTED] wrote: On Mon, 14 May 2007 14:44:55 +0200, Enrico Weigelt wrote: No, the tests fail because some perl modules are missing, which are required to run the tests, but not for coreutils itself. If the test is optional then FEATURES=-test should skip it. Ah, I though is was enough, not adding test to FEATURES. (in other words: it has to be enabled explicitly) cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
[gentoo-user] why PDEPEND ?
Hi folks I've seen perl has some PDEPEND's, which means that these packages (PodParser and Test-Harness) are emerged right after perl. Why is that necessary ? Shouldn't those packages requiring these two simply have them as DEPEND ? cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] why PDEPEND ?
On Mon, 2007-05-14 at 15:18 +0200, Enrico Weigelt wrote: Hi folks I've seen perl has some PDEPEND's, which means that these packages (PodParser and Test-Harness) are emerged right after perl. Why is that necessary ? Because depends are resolved prior to a given package and so my guess is the above would fail if perl were not installed/updated first, therefore they are P[OST]DEPENDs -- Albert W. Hopkins -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
On Mon, 14 May 2007 15:14:40 +0200, Enrico Weigelt wrote: If the test is optional then FEATURES=-test should skip it. Ah, I though is was enough, not adding test to FEATURES. (in other words: it has to be enabled explicitly) It should but you haven't posted your emerge --info. In this case, the test must be explicitly enabled in the ebuild, which gives you two choices: edit the ebuild or use a more up to date installation environment. -- Neil Bothwick PC DOS Error #01: Windows loading, come back tomorrow signature.asc Description: PGP signature
RE: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
If you have an active internet environment, use the knopix disk to download an iso for one of the live CD's, such as the actual liveCD or the minimal CD, and then burn to disk, and get the stage3 tarball. Or, if you are on a different machine now, use the machine you are on now to get the ISO if you are able. If you have enough of an internet connection to use emerge, then odds are you can download files. -Original Message- From: Neil Bothwick [mailto:[EMAIL PROTECTED] Sent: Monday, May 14, 2007 10:45 PM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1 On Mon, 14 May 2007 15:14:40 +0200, Enrico Weigelt wrote: If the test is optional then FEATURES=-test should skip it. Ah, I though is was enough, not adding test to FEATURES. (in other words: it has to be enabled explicitly) It should but you haven't posted your emerge --info. In this case, the test must be explicitly enabled in the ebuild, which gives you two choices: edit the ebuild or use a more up to date installation environment. -- Neil Bothwick PC DOS Error #01: Windows loading, come back tomorrow -- [EMAIL PROTECTED] mailing list
[gentoo-user] OT - Why won't my computers use their own DNS servers?
On my network I have two computers, camille.espersunited.com (70.234.122.250) and catherine.espersunited.com (70.234.122.251). Each of these two computers runs its own local DNS server. They do this to speed up internet access.; at least they used to. Now I find that internet access is slow and that they are trying to use each other's DNS server, which is not what I want. On camille: camille ~ # cat /etc/resolv.conf search espersunited.com nameserver 70.24.122.250 nameserver 70.234.122.251 nameserver 70.234.122.248 nameserver 192.168.1.254 domain espersunited.com camille ~ # dig camille.espersunited.com ; DiG 9.3.4 camille.espersunited.com ;; global options: printcmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NOERROR, id: 54017 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;camille.espersunited.com. IN A ;; ANSWER SECTION: camille.espersunited.com. 10800 IN A 70.234.122.250 ;; AUTHORITY SECTION: espersunited.com. 10800 IN NS baby.espersunited.com. ;; Query time: 1 msec ;; SERVER: 70.234.122.251#53(70.234.122.251) ;; WHEN: Mon May 14 09:16:28 2007 ;; MSG SIZE rcvd: 77 On catherine: catherine ~ # cat /etc/resolv.conf search espersunited.com nameserver 70.24.122.251 nameserver 70.234.122.250 nameserver 70.234.122.248 nameserver 192.168.1.254 domain espersunited.com catherine ~ # dig catherine.espersunited.com ; DiG 9.3.4 catherine.espersunited.com ;; global options: printcmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NOERROR, id: 49177 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1 ;; QUESTION SECTION: ;catherine.espersunited.com.IN A ;; ANSWER SECTION: catherine.espersunited.com. 10800 INA 70.234.122.251 ;; AUTHORITY SECTION: espersunited.com. 10800 IN NS baby.espersunited.com. ;; ADDITIONAL SECTION: baby.espersunited.com. 10800 IN A 70.234.122.248 ;; Query time: 0 msec ;; SERVER: 70.234.122.250#53(70.234.122.250) ;; WHEN: Mon May 14 09:17:06 2007 ;; MSG SIZE rcvd: 95 Why is it doing this? I can post /etc/named/db.espersunited.com if you think it would help... -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] OT - Why won't my computers use their own DNS servers?
On Monday 14 May 2007 16:18, Michael Sullivan wrote: On camille: camille ~ # cat /etc/resolv.conf search espersunited.com nameserver 70.24.122.250 Shouldn't this be 70.234.122.250? -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] OT - Why won't my computers use their own DNS servers?
Hi, On Mon, 14 May 2007 09:18:02 -0500 Michael Sullivan [EMAIL PROTECTED] wrote: On my network I have two computers, camille.espersunited.com (70.234.122.250) and catherine.espersunited.com (70.234.122.251). Each of these two computers runs its own local DNS server. They do this to speed up internet access.; at least they used to. Now I find that internet access is slow and that they are trying to use each other's DNS server, which is not what I want. According to resolv.conf(5) you can by default only configure 3 (!) name servers instead of the four you have. Also, it doesn't make sense to configure a nameserver to return its own host name, so I would consider your test case being invalid. The interesting question would be which name server answers for the case that you query some other host name (also since you said what you want those servers to do is caching, not authoritative name services). Since those are public IPs, I happened to positively check for the existence of a firewall. Its configuration regarding DNS queries (UDP _and_ -- always forgotten -- TCP port 53) would be interesting, esp. the configured allowed IP ranges for source and destination. -hwh -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] OT - Why won't my computers use their own DNS servers? [SOLVED]
On Mon, 2007-05-14 at 16:58 +0200, Etaoin Shrdlu wrote: On Monday 14 May 2007 16:18, Michael Sullivan wrote: On camille: camille ~ # cat /etc/resolv.conf search espersunited.com nameserver 70.24.122.250 Shouldn't this be 70.234.122.250? That did it. Thank you! I wonder how that happened, and why I didn't see that the addresses didn't line up? -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] OT - Why won't my computers use their own DNS servers?
On Mon, 14 May 2007 09:18:02 -0500 Michael Sullivan wrote: On my network I have two computers, camille.espersunited.com (70.234.122.250) and catherine.espersunited.com (70.234.122.251). If IP's are correct: On camille: camille ~ # cat /etc/resolv.conf search espersunited.com nameserver 70.24.122.250 - who is this? Maybe should be 234? nameserver 70.234.122.251 --- catherine! nameserver 70.234.122.248 nameserver 192.168.1.254 domain espersunited.com same thing for catherine On catherine: catherine ~ # cat /etc/resolv.conf search espersunited.com nameserver 70.24.122.251 nameserver 70.234.122.250 nameserver 70.234.122.248 nameserver 192.168.1.254 domain espersunited.com catherine ~ # dig catherine.espersunited.com HTH -- Arnau Bria http://blog.emergetux.net Bombing for peace is like fucking for virginity -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] I want to configure an email server
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Well, you guys have given me a lot of reading to do! Thanks for all the pointers. I'll probably fill you in with updates on my progress as I will no doubt run into a few snags. Thanks again! [EMAIL PROTECTED] wrote: Hey there, thanks for the tip! I didn't expect to find a complete HOWTO, as I said, but then again I've never seen a HOWTO that big. Question, though. Do I need to do anything very special to use MySQL instead of PGSQL? You just have to do what they say in the Howto for PgSQL for MySQL, it's the same thing. A sed -e 's|pgsql|mysql|ig' on this Howto might be sufficient :) Thanks again, --- danthehat ;)[EMAIL PROTECTED] wrote: Hello ! I advise you to take a look at http://gentoo-wiki.com/HOWTO_Email:_A_Complete_Virtual_System . I've used this howto to make my email server and all works fine now. It's composed of Postfix + Spamassassin + SQLGrey + ClamAV coupled with MySQL database for me or PGSQL as in the howto. Regards, Xavier Parizet http://www.linuxant.fr/ -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 But I have no idea where to start. Frankly, so many possibilities and incredibly complex setups have deterred me somewhat from embarking on this venture. However, I would very much like to have my very own email server under my own domain name. So what I'm asking you guys for is documentation, software packages, recommended setups, anything you can add. I am not looking for an all in one HOWTO (and don't really expect to find one with such a complicated process) and I am willing to RTFM when necessary. Thanks a lot guys. - - -- danthehat ;) - -- [EMAIL PROTECTED] mailing list - -- - --- Dan Cowsill http://www.danthehat.net/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGSHez5vsIjOKjGzwRAhSnAJ4/gUIin0T9Z2GqtGuTxeUf/h+kEACgovqx uzBrSW2gZcxWc8CHZzmoSCQ= =yueD -END PGP SIGNATURE- begin:vcard fn:Dan Cowsill n:Cowsill;Dan adr:;;;Welland;ON;L3B 4Z7;Canada email;internet:[EMAIL PROTECTED] x-mozilla-html:FALSE url:http://www.danthehat.net/ version:2.1 end:vcard
Re: [gentoo-user] iptables configuration problem
On Mon, May 14, 2007 8:23 am, Chuanwen Wu wrote: Thank you!I think i have done what you meant. Here is the information: /etc/conf.d/net in the server config_eth0=( 202.114.10.134 netmask 255.255.255.0 brd 202.114.10.255 ) routes_eth0=( default gw 202.114.10.129 ) OK config_eth1=( 192.168.1.63 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth1=( default gw 192.168.1.1 ) You don't need a route here. /etc/conf.d/net in one PC config_eth0=( 192.168.1.35 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth0=( default gw 192.168.1.1 ) No. GW should be 192.168.1.63, which is the IP address of your gateway. HTH, Norberto -- [EMAIL PROTECTED] mailing list
[gentoo-user] A List Question
Is there a way to select a list option so that I can get a plain text digest? The regular list traffic produces way too many messages, but I cannot read the digest version on my mail system because it sends it as a bunch of .eml attachments, and the mail system strips them out (It is at the server side, so I can't influence the behavior). On other lists I am on, they have a choice between mime digests and plain text digests. Is there someone who we can make suggestions too about the list? Kenneth M. Burling Jr
[gentoo-user] Re: A List Question
burlingk at cv63.navy.mil writes: Is there a way to select a list option so that I can get a plain text digest? There is a very nice, browser based interface to this list: www.gmane.org you have to registers, and it chokes up a few times a year, but, it's really cool to view/post to the list via gmane. If you are just reading, you can (last time I looked) just read net news hth, James -- [EMAIL PROTECTED] mailing list
[gentoo-user] Re: A List Question
On 2007-05-14, James [EMAIL PROTECTED] wrote: burlingk at cv63.navy.mil writes: Is there a way to select a list option so that I can get a plain text digest? There is a very nice, browser based interface to this list: www.gmane.org you have to registers, and it chokes up a few times a year, but, it's really cool to view/post to the list via gmane. If you are just reading, you can (last time I looked) just read net news You can both read and post using a news client via gmane. [That's how this follow-up was posted.] I gave up on normal mailing-list delivery a long time ago and switched to gmane for 100% of the mailing lists I follow. -- Grant Edwards grante Yow! Now, let's SEND OUT at for QUICHE!! visi.com -- [EMAIL PROTECTED] mailing list
[gentoo-user] Managing my kernel
I've been puzzling a bit lately over the best way to manage my kernel. I've always tried to keep it as minimal as possible, and I only enable things as I need them. I also don't build modules from the kernel at all. Is there a better way to go? I'm starting to think it might be better to build every single module and let the system load them as it needs them. - Grant -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Managing my kernel
On Montag, 14. Mai 2007, Grant wrote: I've been puzzling a bit lately over the best way to manage my kernel. I've always tried to keep it as minimal as possible, and I only enable things as I need them. I also don't build modules from the kernel at all. Is there a better way to go? I'm starting to think it might be better to build every single module and let the system load them as it needs them. - Grant well, from my point of view: everything needed for booting: in kernel everything needed all the time: in kernel everything that needs a good kicking once in a while (usb, sound): modules everything that needs parameters: modules everything that is not needed all the time: module -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: lots of broken/missing dependencies when starting w/ stage1
* [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Hi, If you have an active internet environment, use the knopix disk to download an iso for one of the live CD's, such as the actual liveCD or the minimal CD, and then burn to disk, and get the stage3 tarball. I would have done so, if I had an burner aailavailable right now ... If I knew that bootstrapping had become so unstable and complicated, I did an complete backup instead of just the configs ;-O Last time I did an fresh install (w/ 2006.1 stage1 image) it ran through w/o major problems. cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] why PDEPEND ?
On Monday 14 May 2007 15:18:21 Enrico Weigelt wrote: I've seen perl has some PDEPEND's, which means that these packages (PodParser and Test-Harness) are emerged right after perl. Why is that necessary ? Shouldn't those packages requiring these two simply have them as DEPEND ? Obviously those packages aren't build time dependencies. So the alternative would be RDEPEND (run-time dependencies). PDEPEND (post dependencies) is chosen to avoid circular dependencies. -- Bo Andresen signature.asc Description: This is a digitally signed message part.
[gentoo-user] fbsplash won't!
Hi All, Just noticed that fbsplash is not shown on my VCs. dmesg shows that it starts: fbsplash: console 0 using theme 'emergence' fbsplash: switched splash state to 'on' on console 0 fbsplash: console 1 using theme 'emergence' fbsplash: switched splash state to 'on' on console 1 fbsplash: console 2 using theme 'emergence' [snip...] but it doesn't. Not sure if this started after I updated to media-gfx/splashutils-1.4.1. Anyone else noticed the same? How do I fix it? -- Regards, Mick pgpFYvWBNn6Dd.pgp Description: PGP signature
Re: [gentoo-user] Managing my kernel
Grant wrote: I've been puzzling a bit lately over the best way to manage my kernel. I've always tried to keep it as minimal as possible, and I only enable things as I need them. I also don't build modules from the kernel at all. Is there a better way to go? I'm starting to think it might be better to build every single module and let the system load them as it needs them. - Grant I always build everything in the kernel. The only module I have is the nvidia driver. Looks like this: [EMAIL PROTECTED] / # lsmod Module Size Used by nvidia 4550612 12 [EMAIL PROTECTED] / # I have not had any trouble kernel wise in a long time. I guess it is just a matter of preference. Dale :-) :-) :-) -- www.myspace.com/-remove-me-dalek1967 Copy n paste then remove the -remove-me- part. -- [EMAIL PROTECTED] mailing list
[gentoo-user] Remote administration of a server
Hello yall, first, this is a kind of half-topic issue, but I'll be using Gentoo and the matter is on the interest of this list. I'll be building a Gentoo Cluster soon in a datacenter 6000 miles (9600 km) away from me... This project has to be as cost efficient as possible. A lot of research was made in this heading: the best cost effective solution. Everything I'll be redundant and scalable. Somethings have three levels of fail safeness (like my storage). So everything can fail. Every single item on the cluster can fail and my service will still be online. Right now I'm concerned with how I'm going to fix software problems when they arrive. I'm thinking about a situation where I have a kernel panic or when the Linux won't boot for any reason (incorrect kernel upgrade, hard drive failure, etc...). To solve this, I'm seeing 2 options right now. The first would be buying a KVM-over-IP unit. But, a KVM-over-IP unit with the number of ports I need is expensive, almost as expensive as the servers it will be connected. The second option would be having another server acting as a USB Guest. This usb-guest-server would be connected to every other server through a USB cable and would be seen as a pen drive with a Gentoo rescue disk inside. Them, if something goes wrong, I can activate the virtual pen drive, remotely reboot the troubled server and it will boot the pen drive. There is a howto about this at http://www.linux-usb.org/gadget/file_storage.html. But I can't find the necessary hardware to do this. Has anyone been able to do anything like this? Thinking about other options, does anyone have any other tip for me? Am I going in the right direction? For the obvious answer: I know it's better to be closer to the datacenter, but that's not an option for me right now and I know I'll have a remote-hands service, but it can be very time inefficient sometimes and I'm trying to avoid it as much as possible. Thank you all. Best regards, Daniel Colchete
Re: [gentoo-user] Remote administration of a server
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Daniel van Ham Colchete wrote: Thinking about other options, does anyone have any other tip for me? How about a robot and a USB keyboard? Sorry, couldn't resist :) R -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGSLIN7So1xaF/eR8RAnIEAKDAQ1pmfXYoT6JVCtFPiC6eoZwbpQCgqowe DODu8E9LTTBt8g3Z8lgoRaw= =cxZF -END PGP SIGNATURE- -- [EMAIL PROTECTED] mailing list
[gentoo-user] MSI Player P610
Hi folks, I am struggeling with an MSI Player P610 with a USB interface. When I connect my memory stick or my camera, I get something like this in my log file: May 14 20:01:01 [kernel] usb 1-5: new high speed USB device using ehci_hcd and address 7 May 14 20:01:01 [kernel] usb 1-5: configuration #1 chosen from 1 choice May 14 20:01:01 [kernel] scsi1 : SCSI emulation for USB Mass Storage devices May 14 20:01:06 [kernel] Vendor: Model: USB FLASH DRIVE Rev: 1.01 May 14 20:01:06 [kernel] Type: Direct-Access ANSI SCSI revision: 00 May 14 20:01:06 [kernel] SCSI device sda: 507904 512-byte hdwr sectors (260 MB) May 14 20:01:06 [kernel] sda: Write Protect is off May 14 20:01:06 [kernel] sda: assuming drive cache: write through May 14 20:01:06 [kernel] SCSI device sda: 507904 512-byte hdwr sectors (260 MB) May 14 20:01:06 [kernel] sda: Write Protect is off May 14 20:01:06 [kernel] sda: assuming drive cache: write through May 14 20:01:06 [kernel] sd 1:0:0:0: Attached scsi removable disk sda May 14 20:01:06 [kernel] sd 1:0:0:0: Attached scsi generic sg0 type 0 When connecting the MSI Player, I get this: May 14 20:00:32 [kernel] usb 1-5: new high speed USB device using ehci_hcd and address 6 May 14 20:00:32 [kernel] usb 1-5: configuration #128 chosen from 1 choice No SCSI device file is generated and, therefore, can not be mounted. Any idea? Uwe -- The Informal Linux Group Namibia: http://www.linux.org.na SysEx (Pty) Ltd.: http://www.SysEx.com.na -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Remote administration of a server
Hi, On Mon, 14 May 2007 15:42:45 -0300 Daniel van Ham Colchete [EMAIL PROTECTED] wrote: Thinking about other options, does anyone have any other tip for me? Am I going in the right direction? The two options you've mentioned are quite different. One gives console access, the other basically cures HD fails. The latter is clearly a job for your hosting company, I think. And there's an old, proven way for the task console access: forget about that graphics output on that computer and learn to trust in good ol' serial connections :-) certainly cheaper than KVM-over-IP. Another option would be for the servers to default to netbooting and fall back to HD on boot. Then you were able to switch on the service offering the netboot images on some fall-back servers on-demand. I think this is somewhat like your USB idea. Or generally use netboot (w/ redundant servers) and forget about the HD fails alltogether (i.e., have some remote login program in your initrd). All these options still won't give you the opportunity to power-cycle your machines, which might be the only option left under some circumstances. A hw watchdog can probably reduce the impact of that problem a lot. -hwh -- [EMAIL PROTECTED] mailing list
[gentoo-user] Re: MSI Player P610
On 14 May 2007, Uwe Thiem wrote: Hi folks, I am struggeling with an MSI Player P610 with a USB interface. When I connect my memory stick or my camera, I get something like this in my log file: May 14 20:01:01 [kernel] usb 1-5: new high speed USB device using ehci_hcd and address 7 May 14 20:01:01 [kernel] usb 1-5: configuration #1 chosen from 1 choice May 14 20:01:01 [kernel] scsi1 : SCSI emulation for USB Mass Storage devices May 14 20:01:06 [kernel] Vendor: Model: USB FLASH DRIVE Rev: 1.01 May 14 20:01:06 [kernel] Type: Direct-Access ANSI SCSI revision: 00 May 14 20:01:06 [kernel] SCSI device sda: 507904 512-byte hdwr sectors (260 MB) May 14 20:01:06 [kernel] sda: Write Protect is off May 14 20:01:06 [kernel] sda: assuming drive cache: write through May 14 20:01:06 [kernel] SCSI device sda: 507904 512-byte hdwr sectors (260 MB) May 14 20:01:06 [kernel] sda: Write Protect is off May 14 20:01:06 [kernel] sda: assuming drive cache: write through May 14 20:01:06 [kernel] sd 1:0:0:0: Attached scsi removable disk sda May 14 20:01:06 [kernel] sd 1:0:0:0: Attached scsi generic sg0 type 0 When connecting the MSI Player, I get this: May 14 20:00:32 [kernel] usb 1-5: new high speed USB device using ehci_hcd and address 6 May 14 20:00:32 [kernel] usb 1-5: configuration #128 chosen from 1 choice No SCSI device file is generated and, therefore, can not be mounted. Any idea? Brief update: Though google and the documentation coming with the player didn't reveal anything about it, it looks like this beast isn't a USB storage device. :-( Uwe -- The Informal Linux Group Namibia: http://www.linux.org.na SysEx (Pty) Ltd.: http://www.SysEx.com.na -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Remote administration of a server
On Monday 14 May 2007 19:42:45 Daniel van Ham Colchete wrote: To solve this, I'm seeing 2 options right now. The first would be buying a KVM-over-IP unit. But, a KVM-over-IP unit with the number of ports I need is expensive, almost as expensive as the servers it will be connected. We use a Belkin KVM-IP box with 2 sets of ports. One set for a local keyboard/monitor/mouse, and one to a 16 port Belkin KVM. The IP box can handle upto 64 KVM ports, and the KVM can daisy chain to an extent I don't know. You don't say how many servers, but 64 is quite a lot. I believe Belkin do a 4 channel IP box too. Total cost was, I think, ~£700. To remotely manage 16 servers, peanuts. Thinking about other options, does anyone have any other tip for me? Am I going in the right direction? For the obvious answer: I know it's better to be closer to the datacenter, but that's not an option for me right now and I know I'll have a remote-hands service, but it can be very time inefficient sometimes and I'm trying to avoid it as much as possible. Remotely managed PDUs? Very very useful to be able to power cycle remotely too! -- Mike Williams -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Managing my kernel
On Mon, 14 May 2007 18:09:37 +0200 Hemmann, Volker Armin [EMAIL PROTECTED] wrote: On Montag, 14. Mai 2007, Grant wrote: I've been puzzling a bit lately over the best way to manage my kernel. I've always tried to keep it as minimal as possible, and I only enable things as I need them. I also don't build modules from the kernel at all. Is there a better way to go? I'm starting to think it might be better to build every single module and let the system load them as it needs them. - Grant well, from my point of view: everything needed for booting: in kernel everything needed all the time: in kernel everything that needs a good kicking once in a while (usb, sound): modules everything that needs parameters: modules everything that is not needed all the time: module I would really add: everything not needed at all: out! Kernel build time is also an issue - I don't wanna be watching those messages floating around the screen forever. Of course, inheriting the .config is a must, though it can lead to problems if you ain't too much one of the Changelog-reading-guys. Otherwise I'll just agree with Volker, though I keep USB in-kernel on my laptop as it is very important to me. Gentoo is actually all about keeping all of the stuff as minimal as possible ;) Regards, Aleks -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Managing my kernel
On Tue, 15 May 2007 00:37:57 +0200, Aleksandar L. Dimitrov wrote: Gentoo is actually all about keeping all of the stuff as minimal as possible ;) Gentoo is all about doing what you want, not what other people think you should do. It doesn't matter whether you want all modules, all in-kernel, every module built or a compromise, it's up to you. -- Neil Bothwick ... Taglines: and How They Affect Women. Next On Oprah. signature.asc Description: PGP signature
RE: [gentoo-user] Re: A List Question
-Original Message- From: news [mailto:[EMAIL PROTECTED] On Behalf Of Q Sent: Tuesday, May 15, 2007 12:49 AM To: gentoo-user@lists.gentoo.org Subject: [gentoo-user] Re: A List Question James [EMAIL PROTECTED] wrote: [about gmane.org] If you are just reading, you can (last time I looked) just read net news You can also post through their nntp server, as I am now. You have to be subscribed to the ml (I turn e-mail delivery off). The first time you post, gmane e-mails you a confirmation message, and you must reply to it. This doesn't give the flat digest the OP wants, but it might be enough to only see the headers in the news client and download only what's wanted. -- Q My problem is that I do not often have proper internet access underway, and I NEVER have NNTP access at all from the ship I am on. I have to deal with highly restrictive network policies. Email is the only viable option, I am just not sure if my account can handle a full mailing list without digests. However, the same network also makes the mime digests almost impossible. How do I disable mail delivery? No matter what commands I throw at the help server, it just sends me back a list of the list-subscribe@ and list-unsubscribe@ email addresses. :( I am probably missing something obvious. -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] iptables configuration problem
Greetings all. Hope the weather in bejing is pleasant, Mr Wu. On Mon, 14 May 2007 11:58:34 -0300 (ART) Norberto Bensa [EMAIL PROTECTED] wrote: On Mon, May 14, 2007 8:23 am, Chuanwen Wu wrote: Thank you!I think i have done what you meant. Here is the information: /etc/conf.d/net in the server config_eth0=( 202.114.10.134 netmask 255.255.255.0 brd 202.114.10.255 ) routes_eth0=( default gw 202.114.10.129 ) OK config_eth1=( 192.168.1.63 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth1=( default gw 192.168.1.1 ) You don't need a route here. More exactly, a route to the subnet 192.168.1.0/24 will automatically be created through eth1. A _gateway_ in this case is not necessary because eth1 lives on that subnet. /etc/conf.d/net in one PC config_eth0=( 192.168.1.35 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth0=( default gw 192.168.1.1 ) No. GW should be 192.168.1.63, which is the IP address of your gateway. HTH, Norberto First, the firewall configuration. Your first message said: The eth0 here has the real ip,and the eth1 have a subnet ip:192.168.1.21. But here you show that you set it to .63, as Norberto pointed out. I assume that was just a typographical error in the first email. Moving on, the default route for the firewall is probably to the outside world, and if you can ping google.com, it works. Second, the client configuration. The route for the subnet it's on (192.168.1/24) is automatically created, as before. The default route is the IP of the firewall/gateway it's behind, namely 192.168.1.63 as Norberto said. The machine that's forwarding packets to the internet for these hosts now provides the route to the outside world for these hosts. Third, you must tell your client PCs nameservers, so that they can resolve domain names. If you fail to do so, even though a ping of google.com, for example, fails, a ping of its ip address (64.233.167.99, in my case) will work. Fourth, you must check your firewall (that is, iptables) configuration to be sure your iptables all refer to the correct subnet. iptables --table nat -A POSTROUTING -s 192.168.8.0/24 -j MASQUERADE that wasn't right -- obviously the subnet should be your own. Since the firewall you're building knows all the information the hosts need to know (subnet information, routes, etc) you may wish to set up a rudimentary DHCP server on it, so that additional hosts can be added without configuration by the user. You may also wish to impliment a caching, recursive nameserver for enhanced efficiency. DNSMasq can do both. -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: A List Question
* [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Hi, altough I missed the start of the thread ... snip My problem is that I do not often have proper internet access underway, and I NEVER have NNTP access at all from the ship I am on. I have to deal with highly restrictive network policies. Email is the only viable option, I am just not sure if my account can handle a full mailing list without digests. However, the same network also makes the mime digests almost impossible. Are you able to do HTTP connects or UUCP callouts ? cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: A List Question
On Mon, 2007-05-14 at 15:37 +, James wrote: burlingk at cv63.navy.mil writes: Is there a way to select a list option so that I can get a plain text digest? There is a very nice, browser based interface to this list: www.gmane.org you have to registers, not if you just want to read the list :) -- Iain Buchanan iaindb at netspace dot net dot au The man who sets out to carry a cat by its tail learns something that will always be useful and which never will grow dim or doubtful. -- Mark Twain -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Managing my kernel
On Mon, 14 May 2007 22:16:04 +0100 Neil Bothwick [EMAIL PROTECTED] wrote: On Tue, 15 May 2007 00:37:57 +0200, Aleksandar L. Dimitrov wrote: Gentoo is actually all about keeping all of the stuff as minimal as possible ;) Gentoo is all about doing what you want, not what other people think you should do. It doesn't matter whether you want all modules, all in-kernel, every module built or a compromise, it's up to you. Well, OK, I should probably add a 'for me' next time. Still, the guy asked about opinions - and my opinion I gave. Nothing more: In my opinion keeping stuff simple and slim on the kernel side means reliability and performance. This is an opinion formed by the (admittedly limited) experience I got so far. Regards, Aleks -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Managing my kernel
Grant wrote: I've been puzzling a bit lately over the best way to manage my kernel. I've always tried to keep it as minimal as possible, and I only enable things as I need them. I also don't build modules from the kernel at all. Is there a better way to go? I'm starting to think it might be better to build every single module and let the system load them as it needs A friend of mine does this for his production servers: 1/ builds the known needed things into the kernel 2/ disables loadable modules completely This is probably not suitable for some use cases...(new raid card ...ooops... redo kernel), but if you are deploying to known hardware it is ok. Cheers Mark -- [EMAIL PROTECTED] mailing list
RE: [gentoo-user] Re: A List Question
Thank you for all the input. I will give the gmane page a try when I am able. Although that is not an optimal option, it may still be better than just unsubscribing. Thank you very much to all those who answered my questions. :) -- Ken -- [EMAIL PROTECTED] mailing list
RE: [gentoo-user] Re: A List Question
I think that once my internet access becomes functional (even then it will just be .edu, .org, .gov, and .mil sites), I will see how well the gmane page loads for me. :) I will use it to read the messages, and email to post. -Original Message- From: Iain Buchanan [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 15, 2007 9:07 AM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] Re: A List Question On Mon, 2007-05-14 at 15:37 +, James wrote: burlingk at cv63.navy.mil writes: Is there a way to select a list option so that I can get a plain text digest? There is a very nice, browser based interface to this list: www.gmane.org you have to registers, not if you just want to read the list :) -- Iain Buchanan iaindb at netspace dot net dot au The man who sets out to carry a cat by its tail learns something that will always be useful and which never will grow dim or doubtful. -- Mark Twain -- [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
RE: [gentoo-user] Re: A List Question
Strictly http and https, and only through Internet Explorer. I'll give the gmane.org site a try when the network comes online. ^_^ If I can get enough of a connection to bring the pages up, then it may be acceptable for reading purposes. If that is the case, then I can use email to post. I will try to keep my inbox clean until then. ^_^ :) -Original Message- From: Enrico Weigelt [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 15, 2007 7:27 AM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] Re: A List Question * [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Hi, altough I missed the start of the thread ... snip My problem is that I do not often have proper internet access underway, and I NEVER have NNTP access at all from the ship I am on. I have to deal with highly restrictive network policies. Email is the only viable option, I am just not sure if my account can handle a full mailing list without digests. However, the same network also makes the mime digests almost impossible. Are you able to do HTTP connects or UUCP callouts ? cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
RE: [gentoo-user] Gnome / problem registering the panel with bonobo-activation-server / error code 3
I've still got no gnome working and no idea how to fix this. I joined the gnome list, but it's useless. I've posted several times, and nothing gets through to it! I use DynDNS so it should work fine. The Exim list (which blocks too) works. In any event, it's so low volume (shocking considering how huge gnome is), I wonder if there is more than a handful of people on it to begin with. But I digress... This weekend, I did an emerge -au world and after two days, and like 160 packages, and all the 'etc-update' and stuff, still no gnome love. rev-dep rebuild. Not even a some lube. Then I did an emerge -aDu gnome and it compiled like 59 more packages. Guess what... Yep. Gnome still hates me and is putting it right in my pooper. Dry. So now I'm out of ideas. Is there a 'debug' mode or something I can see what or why whatever is crashing? How can I be the *only* one having this issue?! -Original Message- From: Daevid Vincent [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 21, 2007 10:32 PM To: gentoo-user@lists.gentoo.org Subject: [gentoo-user] Gnome / problem registering the panel with bonobo-activation-server / error code 3 Okay. My gnome is broken and has been for some time and I can't seem to fix it or find any solutions on the web. I was hoping eventually some emerge would fix it magically for me. When I start it (even as root), it gets to the third icon (like a desktop looking one), then gives me some Nautilus can't be used now, due to an unexpected error while attempting to register the file manager view server. There is also another error window that says something about problem registering the panel with bonobo-activation-server and error code is 3. Then I click ok and it exits. Leaving me with an empty itty-bitty checker-board like pattern screen and a mouse pointer. I have to hit CTRL+ALT+BKSP to get out of it. I've tried to re-emerge gnome-base/libbonobo 2.16.0 gnome-base/libbonoboui 2.16.0 gnome-base/orbit 2.14.2 gnome-base/nautilus 2.16.3 And nothing is fixing it. I've also done a rev-dep-rebuild to no avail. Ideas? -- [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list
[gentoo-user] maintaining QM'ed overla
Hi folks, now that I'm forced to maintain my own QM'ed overlay, I'm looking for some tools making it some bit easier: a) if I decide to take over some package, it must be absolutely clear that no more ebuilds from the main tree can get in b) I need some automatic notification on updates on the main tree for those packages. Of course I could hack up something, but perhaps there already is some proven tool for that ? cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
[gentoo-user] how to check package/installation integrity
Hi folks, I've seen my system misses some files from the readline package. /var/db/pkg/... contains an good-looking entry for it. How can I run an automatic check for such missing files ? cu -- - Enrico Weigelt== metux IT service - http://www.metux.de/ - Please visit the OpenSource QM Taskforce: http://wiki.metux.de/public/OpenSource_QM_Taskforce Patches / Fixes for a lot dozens of packages in dozens of versions: http://patches.metux.de/ - -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Managing my kernel
On Tue, 15 May 2007 12:33:22 +1200 Mark Kirkwood [EMAIL PROTECTED] wrote: Grant wrote: I've been puzzling a bit lately over the best way to manage my kernel. I've always tried to keep it as minimal as possible, and I only enable things as I need them. I also don't build modules from the kernel at all. Is there a better way to go? I'm starting to think it might be better to build every single module and let the system load them as it needs A friend of mine does this for his production servers: 1/ builds the known needed things into the kernel 2/ disables loadable modules completely This is probably not suitable for some use cases...(new raid card ...ooops... redo kernel), but if you are deploying to known hardware it is ok. Cheers Mark But Why? What's the benefit? If the code isn't being used, it isn't going to slow down the kernel is it? And the size of the kernel is irrelevant in my opinion -- the kernel is far from the predominant memory consumer on even a slow system. I think it's more likely that you'll have a problem with your kernel configuration than your kernel performance, and modules are the only way to add kernel support without rebooting. Furthermore, kernel modules have their own benefits -- increased run-time configuration, for example (as opposed to a boot parameter). No, I agree with volker: everything needed for booting: in kernel everything needed all the time: in kernel everything that needs a good kicking once in a while (usb, sound): modules everything that needs parameters: modules everything that is not needed all the time: module that way, you can also build modules on-the-fly to suit your needs and then compile them into the kernel, if desired, the next time you rebuild it. -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] iptables configuration problem
Thank Norberto and Dan Farrell!I think i had a misunderstand and made some mistakes.I hope I have correct it now. /etc/conf.d/net in the server config_eth0=( 202.114.10.134 netmask 255.255.255.0 brd 202.114.10.255 ) routes_eth0=( default gw 202.114.10.129 ) config_eth1=( 192.168.1.1 netmask 255.255.255.0 brd 192.168.1.255 ) /etc/conf.d/net in a PC config_eth0=( 192.168.1.35 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth0=( default gw 192.168.1.1 ) 2007/5/15, Dan Farrell [EMAIL PROTECTED]: Greetings all. Hope the weather in bejing is pleasant, Mr Wu. On Mon, 14 May 2007 11:58:34 -0300 (ART) Norberto Bensa [EMAIL PROTECTED] wrote: On Mon, May 14, 2007 8:23 am, Chuanwen Wu wrote: Thank you!I think i have done what you meant. Here is the information: /etc/conf.d/net in the server config_eth0=( 202.114.10.134 netmask 255.255.255.0 brd 202.114.10.255 ) routes_eth0=( default gw 202.114.10.129 ) OK config_eth1=( 192.168.1.63 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth1=( default gw 192.168.1.1 ) You don't need a route here. More exactly, a route to the subnet 192.168.1.0/24 will automatically be created through eth1. A _gateway_ in this case is not necessary because eth1 lives on that subnet. /etc/conf.d/net in one PC config_eth0=( 192.168.1.35 netmask 255.255.255.0 brd 192.168.1.255 ) routes_eth0=( default gw 192.168.1.1 ) No. GW should be 192.168.1.63, which is the IP address of your gateway. HTH, Norberto First, the firewall configuration. Your first message said: The eth0 here has the real ip,and the eth1 have a subnet ip:192.168.1.21. But here you show that you set it to .63, as Norberto pointed out. I assume that was just a typographical error in the first email. Moving on, the default route for the firewall is probably to the outside world, and if you can ping google.com, it works. Second, the client configuration. The route for the subnet it's on (192.168.1/24) is automatically created, as before. The default route is the IP of the firewall/gateway it's behind, namely 192.168.1.63 as Norberto said. The machine that's forwarding packets to the internet for these hosts now provides the route to the outside world for these hosts. Third, you must tell your client PCs nameservers, so that they can resolve domain names. If you fail to do so, even though a ping of google.com, for example, fails, a ping of its ip address (64.233.167.99, in my case) will work. All my PCs have the same /etc/resove.conf file with the server.And now the PC can't ping through 66.249.89.99(of course,the server can). Fourth, you must check your firewall (that is, iptables) configuration to be sure your iptables all refer to the correct subnet. iptables --table nat -A POSTROUTING -s 192.168.8.0/24 -j MASQUERADE that wasn't right -- obviously the subnet should be your own. I have already corrected it to iptables --table nat -A POSTROUTING -s 192.168.1.0/24 -j MASQUERADE from the first time. Since the firewall you're building knows all the information the hosts need to know (subnet information, routes, etc) you may wish to set up a rudimentary DHCP server on it, so that additional hosts can be added without configuration by the user. You may also wish to impliment a caching, recursive nameserver for enhanced efficiency. DNSMasq can do both. Thanks for your advice! -- [EMAIL PROTECTED] mailing list When a PC ping 66.249.89.99,I got these information from the server: # tcpdump -n -i eth1 net 192.168.1.0/24 and port not 22 and not arp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes 10:01:08.214160 IP 192.168.1.35 66.249.89.99: ICMP echo request, id 35391, seq 599, length 64 10:01:09.214014 IP 192.168.1.35 66.249.89.99: ICMP echo request, id 35391, seq 600, length 64 10:01:10.213899 IP 192.168.1.35 66.249.89.99: ICMP echo request, id 35391, seq 601, length 64 10:01:11.213792 IP 192.168.1.35 66.249.89.99: ICMP echo request, id 35391, seq 602, length 64 10:01:12.213676 IP 192.168.1.35 66.249.89.99: ICMP echo request, id 35391, seq 603, length 64 5 packets captured 5 packets received by filter 0 packets dropped by kernel And # tcpdump -n -i eth0 net 202.114.10.134 and port not 22 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes Does it mean that eth1(the interface in my subnet) receive the request but don't post forward it? -- wcw -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] how to check package/installation integrity
On 03:51 Tue 15 May , Enrico Weigelt wrote: Hi folks, I've seen my system misses some files from the readline package. /var/db/pkg/... contains an good-looking entry for it. How can I run an automatic check for such missing files ? Have you tried, # equery check package_name 'equery' comes with 'app-portage/gentoolkit' -- I don't know why, but first C programs tend to look a lot worse than first programs in any other language (maybe except for fortran, but then I suspect all fortran programs look like `firsts') (By Olaf Kirch) -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] iptables configuration problem
On Tue, 15 May 2007 10:35:38 +0800 Chuanwen Wu [EMAIL PROTECTED] wrote: Does it mean that eth1(the interface in my subnet) receive the request but don't post forward it? Perhaps you should attach the output of iptables -t nat -L -v; iptables -L -v; so I can see the rules... while you're at it, edit /etc/sysctl.conf so that forwarding is enabled every time you reboot, and make sure it's still enabled now. -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] iptables configuration problem
2007/5/15, Dan Farrell [EMAIL PROTECTED]: On Tue, 15 May 2007 10:35:38 +0800 Chuanwen Wu [EMAIL PROTECTED] wrote: Does it mean that eth1(the interface in my subnet) receive the request but don't post forward it? Perhaps you should attach the output of iptables -t nat -L -v; iptables -L -v; so I can see the rules... while you're at it, # iptables -L -v Chain INPUT (policy ACCEPT 24414 packets, 3853K bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 33323 packets, 7123K bytes) pkts bytes target prot opt in out source destination # iptables -L -v -t nat Chain PREROUTING (policy ACCEPT 7546 packets, 1103K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 340 packets, 28034 bytes) pkts bytes target prot opt in out source destination 0 0 MASQUERADE all -- anyany 192.168.1.0/24 anywhere Chain OUTPUT (policy ACCEPT 350 packets, 28746 bytes) pkts bytes target prot opt in out source destination edit /etc/sysctl.conf so that forwarding is enabled every time you reboot, and make sure it's still enabled now. Oh!God!My must forget to enabled forwarding after last night! Now,the PCs in the subnet can connect internal! By the way,do you mean to change #net.ipv4.ip_forward = 0(default in /etc/sysctl.conf) to net.ipv4.ip_forward = 1? -- [EMAIL PROTECTED] mailing list -- wcw -- [EMAIL PROTECTED] mailing list