Re: [JAWS-Users] Jaws 2018 sluggishness on internet
Just to confirm, How long does it take to bring up the JAWS find dialog (Ctrl+F)? Dave Oregonian, woodworker, Engineer, Musician, and Pioneer - Original Message - From: "T. Civitello" To: "Jaws users list" Sent: Sunday, November 26, 2017 21:43 Subject: [JAWS-Users] Jaws 2018 sluggishness on internet Jaws 2018 sluggishness on internet Don’t know if sluggishness is quite right for what has been occurring with Jaws 2018 and Windows 7 on the internet. I have been visiting the Epson, Amazon and Staples Web sites the last few days and whenever you click on a link Jaws goes silent for 15 or 20 seconds before resuming speech. Sometimes I have to tab away from the page to get Jaws talking again. I think this started with 2018. We also have a pc running Windows 10 and Jaws 2018 and it does not have this problem. Anyone know what is going on with this issue? Tom For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Web site message
Thanks .. I don't feel so quite alone. I'll try your suggestion and hopefully figure this out. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Adrian Spratt Sent: Sunday, November 26, 2017 10:48 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Hi, Laura. I also had to figure out this technology mostly by myself, but with a great deal of help from people on this and other lists. There are many others here in our situation. Gerald gave you the right advice. To help clarify things, Adobe tends to put its PDF reader on the desktop, where it's labeled "acrobat" on my system. No mention of Adobe, even though it's an Adobe product. Adobe Flash is made by the same company but has nothing to do with its PDF reader. Instead, it's about sound and videos. So, go to your desktop with either Windows key+d or Windows key+m. then press the letter a until, I hope, you hear Acrobat. Assuming you do, press enter. The Adobe Acrobat Reader will open. Then follow Gerald's directions. It should make a big difference. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Laura Richardson Sent: Sunday, November 26, 2017 11:23 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Thank you for the tips. Hopefully I'll be able to access and read the information on the web site. I really don't know how to download and access that once it's on my computer. I believe I have Adobe Flash but have no clue how to use it and read PDF documents. I'm feeling quite overwhelmed and am trying to learn how to do these types of things on my own as I have no help or guidance. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Gerald Levy Sent: Sunday, November 26, 2017 10:23 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Another tip. If your PDF documents are being read by Acrobat Reader PC or Adobe Reader, you should uncheck the box in the Accessibility Set Up Assistant labeled, "Open PDF documents in the web browser", which may be checked by default. To do this, launch Acrobat Reader, go to the Edit menu and scroll all the way down to the Accessibility submenu. Select Set up Assistant, and on the fifth and final page of the Assistant, tab to this check box and uncheck it. Opening PDF documents in the browser can sometimes cause problems with JAWS or the browser itself. Gerald -Original Message- From: Laura Richardson Sent: Sunday, November 26, 2017 10:59 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Thank you for the info .. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Sunday, November 26, 2017 7:50 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Alt s should allow you to have it come up in pdf so jaws can read it. For what I've experienced, you do have to close down the internet in those situations. What I do is use control enter to open those up, so I goes to anotuerh window. Then, if you want to cloe it, you can just close that window without losing the internet. Remember to hit control tab to go to the other window you opened. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Laura Richardson Sent: Sunday, November 26, 2017 2:14 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Web site message Hello, When I went to a web site I got the following message: Infer reading order from document (recommended) Left- to - right top - to - bottom reading order Use reading order in raw print stream There is nothing to click on .. I cannot back out of this site with back space or alt + left arrow .. I cannot go to favorites with alt + a .. The only way to get off this site is alt + f4 which takes me off the internet completely. Has anybody come across this situation? If so, do you have any suggestions or remedies? .. Using Jaws 18, Windows 10 & Internet Explorer. Thank you, Laura For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Jaws 2018 sluggishness on internet
Jaws 2018 sluggishness on internet Don’t know if sluggishness is quite right for what has been occurring with Jaws 2018 and Windows 7 on the internet. I have been visiting the Epson, Amazon and Staples Web sites the last few days and whenever you click on a link Jaws goes silent for 15 or 20 seconds before resuming speech. Sometimes I have to tab away from the page to get Jaws talking again. I think this started with 2018. We also have a pc running Windows 10 and Jaws 2018 and it does not have this problem. Anyone know what is going on with this issue? Tom For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Web site message
Hi, Laura. I also had to figure out this technology mostly by myself, but with a great deal of help from people on this and other lists. There are many others here in our situation. Gerald gave you the right advice. To help clarify things, Adobe tends to put its PDF reader on the desktop, where it's labeled "acrobat" on my system. No mention of Adobe, even though it's an Adobe product. Adobe Flash is made by the same company but has nothing to do with its PDF reader. Instead, it's about sound and videos. So, go to your desktop with either Windows key+d or Windows key+m. then press the letter a until, I hope, you hear Acrobat. Assuming you do, press enter. The Adobe Acrobat Reader will open. Then follow Gerald's directions. It should make a big difference. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Laura Richardson Sent: Sunday, November 26, 2017 11:23 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Thank you for the tips. Hopefully I'll be able to access and read the information on the web site. I really don't know how to download and access that once it's on my computer. I believe I have Adobe Flash but have no clue how to use it and read PDF documents. I'm feeling quite overwhelmed and am trying to learn how to do these types of things on my own as I have no help or guidance. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Gerald Levy Sent: Sunday, November 26, 2017 10:23 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Another tip. If your PDF documents are being read by Acrobat Reader PC or Adobe Reader, you should uncheck the box in the Accessibility Set Up Assistant labeled, "Open PDF documents in the web browser", which may be checked by default. To do this, launch Acrobat Reader, go to the Edit menu and scroll all the way down to the Accessibility submenu. Select Set up Assistant, and on the fifth and final page of the Assistant, tab to this check box and uncheck it. Opening PDF documents in the browser can sometimes cause problems with JAWS or the browser itself. Gerald -Original Message- From: Laura Richardson Sent: Sunday, November 26, 2017 10:59 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Thank you for the info .. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Sunday, November 26, 2017 7:50 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Alt s should allow you to have it come up in pdf so jaws can read it. For what I've experienced, you do have to close down the internet in those situations. What I do is use control enter to open those up, so I goes to anotuerh window. Then, if you want to cloe it, you can just close that window without losing the internet. Remember to hit control tab to go to the other window you opened. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Laura Richardson Sent: Sunday, November 26, 2017 2:14 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Web site message Hello, When I went to a web site I got the following message: Infer reading order from document (recommended) Left- to - right top - to - bottom reading order Use reading order in raw print stream There is nothing to click on .. I cannot back out of this site with back space or alt + left arrow .. I cannot go to favorites with alt + a .. The only way to get off this site is alt + f4 which takes me off the internet completely. Has anybody come across this situation? If so, do you have any suggestions or remedies? .. Using Jaws 18, Windows 10 & Internet Explorer. Thank you, Laura For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Facebook
Hello Miriam, I have Jaws 18 and IE 11 too and also do not have a lot of knowledge regarding computer technology. That being said, setting up a Facebook account for me was very easy, done without sighted help, and is quite accessible. Trying to use the regular Facebook site was a nightmare for me and quite unaccessible. I would go to m.facebook.com, enter on create an account, and pretty much follow the instructions from there. If you need further help don't hesitate to ask .. Good luck! Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Miriam Vieni Sent: Sunday, November 26, 2017 9:56 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Facebook I was inadvertently taken by a link to Facebook tonight and so I was playing around with opening an account. It isn't something I need to do but since I was there, I was curious. Anyway, I couldn't do it, even though I could provide my name, date of birth and a password. I think there was a visual thing to copy or something. I have Jaws 18 and I E 11 and no skill at all. Is opening an account especially tricky? Miriam For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Web site message
Thank you for the tips. Hopefully I'll be able to access and read the information on the web site. I really don't know how to download and access that once it's on my computer. I believe I have Adobe Flash but have no clue how to use it and read PDF documents. I'm feeling quite overwhelmed and am trying to learn how to do these types of things on my own as I have no help or guidance. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Gerald Levy Sent: Sunday, November 26, 2017 10:23 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Another tip. If your PDF documents are being read by Acrobat Reader PC or Adobe Reader, you should uncheck the box in the Accessibility Set Up Assistant labeled, "Open PDF documents in the web browser", which may be checked by default. To do this, launch Acrobat Reader, go to the Edit menu and scroll all the way down to the Accessibility submenu. Select Set up Assistant, and on the fifth and final page of the Assistant, tab to this check box and uncheck it. Opening PDF documents in the browser can sometimes cause problems with JAWS or the browser itself. Gerald -Original Message- From: Laura Richardson Sent: Sunday, November 26, 2017 10:59 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Thank you for the info .. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Sunday, November 26, 2017 7:50 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Alt s should allow you to have it come up in pdf so jaws can read it. For what I've experienced, you do have to close down the internet in those situations. What I do is use control enter to open those up, so I goes to anotuerh window. Then, if you want to cloe it, you can just close that window without losing the internet. Remember to hit control tab to go to the other window you opened. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Laura Richardson Sent: Sunday, November 26, 2017 2:14 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Web site message Hello, When I went to a web site I got the following message: Infer reading order from document (recommended) Left- to - right top - to - bottom reading order Use reading order in raw print stream There is nothing to click on .. I cannot back out of this site with back space or alt + left arrow .. I cannot go to favorites with alt + a .. The only way to get off this site is alt + f4 which takes me off the internet completely. Has anybody come across this situation? If so, do you have any suggestions or remedies? .. Using Jaws 18, Windows 10 & Internet Explorer. Thank you, Laura For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Unable to access list of available networks since upgrading to Windows 10 Creators Update (repost from October)
I have latest win 10 on 5 computers with jaws 2018 and not seen this problem. I usually press windows plus i and then go to internet settings click on wifi then their is a link to show available networks. Then i press enter on the one i want then up pops the password cheers michael. -Original Message- From: Christopher Sabine, ONH Consulting Sent: Monday, November 27, 2017 8:08 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Unable to access list of available networks since upgrading to Windows 10 Creators Update (repost from October) Hello all. I posted this to the list about a month ago but still have not received a response. Hello all. I ran into an issue with JAWS that rendered me unable to log on to my hotel's Wi-Fi network at our state's NFB Convention. I am running Windows 10 Creators Update with the latest version of Jaws 18. I can't seem to be able to access the list of available networks in the system tray with my laptop. In Control Panel in the Network and Settings Center, I can arrow to a link for list of Available Networks, but when I press enter or spacebar to activate it, Jaws just says unavailable. I have tried this in Narrator and was eventually able to connect to my hotel's logon screen after closing JAWS and entering Control Panel with Narrator Exclusively. However, when I accessed the logon screen, closed narrator and ran JAWS 18, I discovered that the virtual cursor wouldn't activate and I couldn't log on to the WIFI network. I've only noticed this issue since the Creators Update. I also just installed Windows 2018 and the issue still exists. I called Freedom Scientific Technical Support and was just advised to upgrade to 2018. The Microsoft Disability Answer Desk was no help. Is this a bug that could be replicated and reported to VFO? Thanks. Chris For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Facebook
I was inadvertently taken by a link to Facebook tonight and so I was playing around with opening an account. It isn't something I need to do but since I was there, I was curious. Anyway, I couldn't do it, even though I could provide my name, date of birth and a password. I think there was a visual thing to copy or something. I have Jaws 18 and I E 11 and no skill at all. Is opening an account especially tricky? Miriam For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] quick audacity question
Hi, These hosts are different underlying structures for managing audio. MME is a legacy one that you should only use in case of problems with DirectSound in your particular combination of Windows version and audio driver. WASAPI was introduced in Windows Vista and is particularly helpful if your audio driver or hardware disallow recording audio from the computer (stereo mix or similar input). This is a quick explanation, but theres a good Audacity tutorial on this topic. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Kimsan Sent: Sunday, November 26, 2017 10:23 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] quick audacity question Hi, Under preferences, and device hosts, I see MME, direct sound and wasapi. What are the differences between the three? Thank you, If you are a wrestling fan, I invite you to visit my wrestling site for blogs and podcasts by navigating to: http://www.therasslincafe.com/ Also, you may like our page on facebook at https://www.facebook.com/TheRasslinCafe/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] quick audacity question
Hi, Under preferences, and device hosts, I see MME, direct sound and wasapi. What are the differences between the three? Thank you, If you are a wrestling fan, I invite you to visit my wrestling site for blogs and podcasts by navigating to: http://www.therasslincafe.com/ Also, you may like our page on facebook at https://www.facebook.com/TheRasslinCafe/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table
This workaround is fine, except for the last sell. This is because tabbing from the last sell adds an extra row that you will have to remove latter. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of amca...@verizon.net Sent: Sunday, November 26, 2017 9:24 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table Another work around is to tab to the cell to the right of the cell you want to work in, and use your left arrow to move to the end of the previous cell. If you are working with the cell at the end of the row, I'm not sure if tabbing to the first cell on the next line and then using the left arrow will work. If you were to move to the cell below the cell you want to work in, you could use up arrow to move to the last line in the cell above it. HTH, Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Fernando Gregoire Sent: Sunday, November 26, 2017 5:58 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table Hi Daniel, As far as I know, there's no way of doing this, because pressing END jumps out of the sell as you said, and the JAWS command CTRL+ALT+END jumps to the last sell in the current table. As a workaround, you could work with the sells in Excel, press F2 on the one you want to edit and CTRL+END to go to the end as in any text box. When you finish editing your sells, you can copy and paste the sheet as a table in the Word document. Hope it helps! -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Daniel Gartmann Sent: Sunday, November 26, 2017 7:11 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table Hello, Anyone knows how to jump to the end of the text in the currently selected cell table? I am entering text into a table in Word2016 and want to be able to navigate the text in a specific cell. However, when I press Hoe or End, the cursor jumps out of the cell I am currently typing in. Hope anyone got any hints. Daniel For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] GoldWave
I found a tutorial on using GoldWave the audio editor with jaws. it also has scripts. it’s not a free tutorial but it’s not over priced for the information you get. http://www.hartgen.org/goldwave Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table
Another work around is to tab to the cell to the right of the cell you want to work in, and use your left arrow to move to the end of the previous cell. If you are working with the cell at the end of the row, I'm not sure if tabbing to the first cell on the next line and then using the left arrow will work. If you were to move to the cell below the cell you want to work in, you could use up arrow to move to the last line in the cell above it. HTH, Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Fernando Gregoire Sent: Sunday, November 26, 2017 5:58 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table Hi Daniel, As far as I know, there's no way of doing this, because pressing END jumps out of the sell as you said, and the JAWS command CTRL+ALT+END jumps to the last sell in the current table. As a workaround, you could work with the sells in Excel, press F2 on the one you want to edit and CTRL+END to go to the end as in any text box. When you finish editing your sells, you can copy and paste the sheet as a table in the Word document. Hope it helps! -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Daniel Gartmann Sent: Sunday, November 26, 2017 7:11 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table Hello, Anyone knows how to jump to the end of the text in the currently selected cell table? I am entering text into a table in Word2016 and want to be able to navigate the text in a specific cell. However, when I press Hoe or End, the cursor jumps out of the cell I am currently typing in. Hope anyone got any hints. Daniel For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Unable to access list of available networks sinceupgrading to Windows 10 Creators Update (repost from October)
Dear friend, did you go to windows setting/personalize/task bar? And did you select which icon appear and did you make sure that network is on in JAWS 2018? With regards from Inamuddin with the Skype ID: Charlsdarwin1 Arguing with a woman is reading software license agreement. At the end, you have to ignore everything and clic I agree. You can contact me via gmail: inamuddi...@gmail.com inamuddin.rona...@gmail.com outlook: inam...@outlook.com yahoo: inamuddin2...@yahoo.ca Add my Skype ID: charlsdarwin1 Meet me on facebook: www.facebook.com/inamuddin786 Follow me on my twitter ID: www.twitter.com/charlsdarwin1 Call me on my cell numbers: +92-300-2227598 +92-334-3348409 From: Christopher Sabine, ONH Consulting Sent: Monday, November 27, 2017 2:09 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Unable to access list of available networks sinceupgrading to Windows 10 Creators Update (repost from October) Hello all. I posted this to the list about a month ago but still have not received a response. Hello all. I ran into an issue with JAWS that rendered me unable to log on to my hotel's Wi-Fi network at our state's NFB Convention. I am running Windows 10 Creators Update with the latest version of Jaws 18. I can't seem to be able to access the list of available networks in the system tray with my laptop. In Control Panel in the Network and Settings Center, I can arrow to a link for list of Available Networks, but when I press enter or spacebar to activate it, Jaws just says unavailable. I have tried this in Narrator and was eventually able to connect to my hotel's logon screen after closing JAWS and entering Control Panel with Narrator Exclusively. However, when I accessed the logon screen, closed narrator and ran JAWS 18, I discovered that the virtual cursor wouldn't activate and I couldn't log on to the WIFI network. I've only noticed this issue since the Creators Update. I also just installed Windows 2018 and the issue still exists. I called Freedom Scientific Technical Support and was just advised to upgrade to 2018. The Microsoft Disability Answer Desk was no help. Is this a bug that could be replicated and reported to VFO? Thanks. Chris For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] ***SPAM*** Microsoft Word2016: Jumping to end of cell ina table
Hi Daniel. Tab to the next cell and press the left arrow key, and you're in the place that you want to be. Hans Pauli. -Oprindelig meddelelse- Fra: Daniel Gartmann Dato: 26. november 2017 23:10 Til: jaws-users-list@jaws-users.com Emne: ***SPAM*** [JAWS-Users] Microsoft Word2016: Jumping to end of cell ina table Hello, Anyone knows how to jump to the end of the text in the currently selected cell table? I am entering text into a table in Word2016 and want to be able to navigate the text in a specific cell. However, when I press Hoe or End, the cursor jumps out of the cell I am currently typing in. Hope anyone got any hints. Daniel For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table
Hi Daniel, As far as I know, there's no way of doing this, because pressing END jumps out of the sell as you said, and the JAWS command CTRL+ALT+END jumps to the last sell in the current table. As a workaround, you could work with the sells in Excel, press F2 on the one you want to edit and CTRL+END to go to the end as in any text box. When you finish editing your sells, you can copy and paste the sheet as a table in the Word document. Hope it helps! -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Daniel Gartmann Sent: Sunday, November 26, 2017 7:11 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table Hello, Anyone knows how to jump to the end of the text in the currently selected cell table? I am entering text into a table in Word2016 and want to be able to navigate the text in a specific cell. However, when I press Hoe or End, the cursor jumps out of the cell I am currently typing in. Hope anyone got any hints. Daniel For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Microsoft Word2016: Jumping to end of cell in a table
Hello, Anyone knows how to jump to the end of the text in the currently selected cell table? I am entering text into a table in Word2016 and want to be able to navigate the text in a specific cell. However, when I press Hoe or End, the cursor jumps out of the cell I am currently typing in. Hope anyone got any hints. Daniel For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] JAWS and Skype audio ducking?
Hi, This is because by default Windows reduces volume an half of the full value when detects communication, such as via Skype. To fix this press INSERT+F11 to open the Select a System Tray Icon dialog and press ENTER on the speaker or headphones icon. In the context menu, choose Playback Devices. In the Sound Dialog, go to the Communications page and, in the group of radio buttons, select Do Nothing, then press ENTER to OK. Hope it helps! -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Sadam Ahmed Sent: Sunday, November 26, 2017 2:13 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] JAWS and Skype audio ducking? Hi all, Whenever I make a Skype call from my laptop JAWS audio ducks. Have spoken with the Microsoft Disability Answer desk, level 3, and they can also reproduce this issue. Running JAWS 2018 latest build. Have tested with Narrator and this problem doesn't occur. Any notions as to what to do? Thanks in advance for any assistance rendered. Yours sincerely, Sadam Ahmed JAWS & iOS certified iPhone: + 61 435 892 944 FaceTime, iMessage & email sa...@sadamahmed.com For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Unable to access list of available networks since upgrading to Windows 10 Creators Update (repost from October)
Hello all. I posted this to the list about a month ago but still have not received a response. Hello all. I ran into an issue with JAWS that rendered me unable to log on to my hotel's Wi-Fi network at our state's NFB Convention. I am running Windows 10 Creators Update with the latest version of Jaws 18. I can't seem to be able to access the list of available networks in the system tray with my laptop. In Control Panel in the Network and Settings Center, I can arrow to a link for list of Available Networks, but when I press enter or spacebar to activate it, Jaws just says unavailable. I have tried this in Narrator and was eventually able to connect to my hotel's logon screen after closing JAWS and entering Control Panel with Narrator Exclusively. However, when I accessed the logon screen, closed narrator and ran JAWS 18, I discovered that the virtual cursor wouldn't activate and I couldn't log on to the WIFI network. I've only noticed this issue since the Creators Update. I also just installed Windows 2018 and the issue still exists. I called Freedom Scientific Technical Support and was just advised to upgrade to 2018. The Microsoft Disability Answer Desk was no help. Is this a bug that could be replicated and reported to VFO? Thanks. Chris For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Google Chrome and links
The other day, someone posted that they couldn't get links to work in Chrome, citing just one website. I hadn't had that experience until this morning. The solution was to refresh JAWS with JAWS key+escape. In other words, the link did work, but JAWS hadn't displayed the new page. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] JAWS2018 Not Playing Nice with Office Spell Check
Hello All, I am using Windows10 Professional, OfficePro2016 and JAWS2018 Professional. I am having significant trouble with getting JAWS to read the various components of the spell check dialog in both Outlook and Word. Sometimes it reads nothings, sometimes it reads as I am tabbing through the dialog box and other times it does not. It rarely reads items in the same order when it does talk while tabbing. Does anyone have any suggestions on how to improve or better yet, correct this problem? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Touchpad is Turned Back On
Hi Kevin, That did the trick. Thank you for pointing out the missing step. Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Kevin Sent: Sunday, November 26, 2017 12:16 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Touchpad is Turned Back On you need to press enter after typing device manager into the search box! -Original Message- From: amca...@verizon.net Sent: Sunday, November 26, 2017 7:47 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Touchpad is Turned Back On Kevin, Your instructions are not matching up with what is coming up on my computer. Here is what I am doing. Tapped the Windows key. Typed in device manager. Tab once. Down arrow and I find, Toggle Menu, Home, Notebook, devices, settings, and feedback. I've tried Right/Left arrows, Tab, Shift+Tab, Space, Enter, and Applications key (Fn+Right Control), and I cannot activate any of these items. I also tried typing mice... into the Start Menu search field, and managed to get myself to the hardware tab in the Mouse Properties dialog box. There are 2 items in this list that are exactly the same. I could not do a single thing with them. I did find 3 options for touchpad sensitivity, so I set it to "Low" via a lot of hoop jumping to get JAWS to read the changes I made. Thanks, Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Kevin Sent: Saturday, November 25, 2017 9:50 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Touchpad is Turned Back On try this it worked for me I have a Dell 5000 series laptop type Device Manager onto the (Cortana) search bar when device manager pops up tab then arrow down to"Mice And Other Pointed Devices" ,press the application key on the touchpad driver, and then disable it. -Original Message- From: amca...@verizon.net Sent: Saturday, November 25, 2017 5:39 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Touchpad is Turned Back On Hi All, Is there anyone who recently found that their laptop touchpad was turned back on? I am using a Dell Latitude 5440 running Windows10 and JAWS2018. I think 2 nights ago there was some type of updates made to my laptop, and the next morning when I booted up the laptop I found that the touchpad was turned back on. Turning it off is a bit of a challange that I have not found a way to concore. There is no longer a short cut key as there has been in the past on the Dell Latudes. JAWS is unable to read the dialog box for turning the touchpad off. Does anyone have any suggestions besides seeking sighted help to turn the touch pad off? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Touchpad is Turned Back On
you need to press enter after typing device manager into the search box! -Original Message- From: amca...@verizon.net Sent: Sunday, November 26, 2017 7:47 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Touchpad is Turned Back On Kevin, Your instructions are not matching up with what is coming up on my computer. Here is what I am doing. Tapped the Windows key. Typed in device manager. Tab once. Down arrow and I find, Toggle Menu, Home, Notebook, devices, settings, and feedback. I've tried Right/Left arrows, Tab, Shift+Tab, Space, Enter, and Applications key (Fn+Right Control), and I cannot activate any of these items. I also tried typing mice... into the Start Menu search field, and managed to get myself to the hardware tab in the Mouse Properties dialog box. There are 2 items in this list that are exactly the same. I could not do a single thing with them. I did find 3 options for touchpad sensitivity, so I set it to "Low" via a lot of hoop jumping to get JAWS to read the changes I made. Thanks, Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Kevin Sent: Saturday, November 25, 2017 9:50 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Touchpad is Turned Back On try this it worked for me I have a Dell 5000 series laptop type Device Manager onto the (Cortana) search bar when device manager pops up tab then arrow down to"Mice And Other Pointed Devices" ,press the application key on the touchpad driver, and then disable it. -Original Message- From: amca...@verizon.net Sent: Saturday, November 25, 2017 5:39 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Touchpad is Turned Back On Hi All, Is there anyone who recently found that their laptop touchpad was turned back on? I am using a Dell Latitude 5440 running Windows10 and JAWS2018. I think 2 nights ago there was some type of updates made to my laptop, and the next morning when I booted up the laptop I found that the touchpad was turned back on. Turning it off is a bit of a challange that I have not found a way to concore. There is no longer a short cut key as there has been in the past on the Dell Latudes. JAWS is unable to read the dialog box for turning the touchpad off. Does anyone have any suggestions besides seeking sighted help to turn the touch pad off? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Web site message
Another tip. If your PDF documents are being read by Acrobat Reader PC or Adobe Reader, you should uncheck the box in the Accessibility Set Up Assistant labeled, "Open PDF documents in the web browser", which may be checked by default. To do this, launch Acrobat Reader, go to the Edit menu and scroll all the way down to the Accessibility submenu. Select Set up Assistant, and on the fifth and final page of the Assistant, tab to this check box and uncheck it. Opening PDF documents in the browser can sometimes cause problems with JAWS or the browser itself. Gerald -Original Message- From: Laura Richardson Sent: Sunday, November 26, 2017 10:59 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Thank you for the info .. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Sunday, November 26, 2017 7:50 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Alt s should allow you to have it come up in pdf so jaws can read it. For what I've experienced, you do have to close down the internet in those situations. What I do is use control enter to open those up, so I goes to anotuerh window. Then, if you want to cloe it, you can just close that window without losing the internet. Remember to hit control tab to go to the other window you opened. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Laura Richardson Sent: Sunday, November 26, 2017 2:14 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Web site message Hello, When I went to a web site I got the following message: Infer reading order from document (recommended) Left- to - right top - to - bottom reading order Use reading order in raw print stream There is nothing to click on .. I cannot back out of this site with back space or alt + left arrow .. I cannot go to favorites with alt + a .. The only way to get off this site is alt + f4 which takes me off the internet completely. Has anybody come across this situation? If so, do you have any suggestions or remedies? .. Using Jaws 18, Windows 10 & Internet Explorer. Thank you, Laura For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Is the current version of Nod32 accessible with JAWS?
The reason I ask, I now get the message that nod32 version 8 is out of date. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Web site message
Thank you for the info .. Laura -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Justin Williams Sent: Sunday, November 26, 2017 7:50 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Web site message Alt s should allow you to have it come up in pdf so jaws can read it. For what I've experienced, you do have to close down the internet in those situations. What I do is use control enter to open those up, so I goes to anotuerh window. Then, if you want to cloe it, you can just close that window without losing the internet. Remember to hit control tab to go to the other window you opened. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Laura Richardson Sent: Sunday, November 26, 2017 2:14 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Web site message Hello, When I went to a web site I got the following message: Infer reading order from document (recommended) Left- to - right top - to - bottom reading order Use reading order in raw print stream There is nothing to click on .. I cannot back out of this site with back space or alt + left arrow .. I cannot go to favorites with alt + a .. The only way to get off this site is alt + f4 which takes me off the internet completely. Has anybody come across this situation? If so, do you have any suggestions or remedies? .. Using Jaws 18, Windows 10 & Internet Explorer. Thank you, Laura For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Touchpad is Turned Back On
Michael, There are some HP Touchpads that have the ability to be turned on and off by tapping twice in one of the corners. I think it is the top left corner. I've never been able to figure out which of their touchpads can do this, and which cannot. Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of michael's emails Sent: Saturday, November 25, 2017 10:00 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Touchpad is Turned Back On Hello Annette this has happened to me for 3 yeares now on my HP Laptop. This is a touch pad driver issue. I googled it and for me it was just a matter of reinstalling an older driver. But each time i do this and recieve windows updates it just updates again. It drives me crazy. So now i just type in the start menu and type mouse then it comes up with changing mouse settings. So i click that one and just go in to the touch pad software and disable it each time i boot up. I have tole thems about this in the windows feedback but no fix as yet. Cheers Michael. -Original Message- From: amca...@verizon.net Sent: Sunday, November 26, 2017 12:39 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Touchpad is Turned Back On Hi All, Is there anyone who recently found that their laptop touchpad was turned back on? I am using a Dell Latitude 5440 running Windows10 and JAWS2018. I think 2 nights ago there was some type of updates made to my laptop, and the next morning when I booted up the laptop I found that the touchpad was turned back on. Turning it off is a bit of a challange that I have not found a way to concore. There is no longer a short cut key as there has been in the past on the Dell Latudes. JAWS is unable to read the dialog box for turning the touchpad off. Does anyone have any suggestions besides seeking sighted help to turn the touch pad off? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Touchpad is Turned Back On
Kevin, Your instructions are not matching up with what is coming up on my computer. Here is what I am doing. Tapped the Windows key. Typed in device manager. Tab once. Down arrow and I find, Toggle Menu, Home, Notebook, devices, settings, and feedback. I've tried Right/Left arrows, Tab, Shift+Tab, Space, Enter, and Applications key (Fn+Right Control), and I cannot activate any of these items. I also tried typing mice... into the Start Menu search field, and managed to get myself to the hardware tab in the Mouse Properties dialog box. There are 2 items in this list that are exactly the same. I could not do a single thing with them. I did find 3 options for touchpad sensitivity, so I set it to "Low" via a lot of hoop jumping to get JAWS to read the changes I made. Thanks, Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Kevin Sent: Saturday, November 25, 2017 9:50 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Touchpad is Turned Back On try this it worked for me I have a Dell 5000 series laptop type Device Manager onto the (Cortana) search bar when device manager pops up tab then arrow down to"Mice And Other Pointed Devices" ,press the application key on the touchpad driver, and then disable it. -Original Message- From: amca...@verizon.net Sent: Saturday, November 25, 2017 5:39 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Touchpad is Turned Back On Hi All, Is there anyone who recently found that their laptop touchpad was turned back on? I am using a Dell Latitude 5440 running Windows10 and JAWS2018. I think 2 nights ago there was some type of updates made to my laptop, and the next morning when I booted up the laptop I found that the touchpad was turned back on. Turning it off is a bit of a challange that I have not found a way to concore. There is no longer a short cut key as there has been in the past on the Dell Latudes. JAWS is unable to read the dialog box for turning the touchpad off. Does anyone have any suggestions besides seeking sighted help to turn the touch pad off? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Web site message
Alt s should allow you to have it come up in pdf so jaws can read it. For what I've experienced, you do have to close down the internet in those situations. What I do is use control enter to open those up, so I goes to anotuerh window. Then, if you want to cloe it, you can just close that window without losing the internet. Remember to hit control tab to go to the other window you opened. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Laura Richardson Sent: Sunday, November 26, 2017 2:14 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Web site message Hello, When I went to a web site I got the following message: Infer reading order from document (recommended) Left- to - right top - to - bottom reading order Use reading order in raw print stream There is nothing to click on .. I cannot back out of this site with back space or alt + left arrow .. I cannot go to favorites with alt + a .. The only way to get off this site is alt + f4 which takes me off the internet completely. Has anybody come across this situation? If so, do you have any suggestions or remedies? .. Using Jaws 18, Windows 10 & Internet Explorer. Thank you, Laura For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] thanks. plusa 2016 outlook question
Ted, In my Outlook 2016 when I have the email received open I SHIFT + TAB about 4 times until it gets up to sent from and it is at the right end of the address. Then I highlight & copy into a text file where I separate the individual's email address. George The definition of insanity is doing the same thing over and over and expecting different results. George a Martinez CPA, PC 12231 N 50th Avenue Glendale, Arizona 85304-2215 Voice 602.368.8854 FAX 206-666-2589 Email ga.marti...@cox.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Ted Larson Sent: Saturday, November 25, 2017 8:27 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] thanks. plusa 2016 outlook question Dear List: Thanks to those replying to my queries. How do I reply to someone on the list without it going to the entire list? I cannot figure how to read the sender's email address character by character so I can replace the group address with the single person's address. I tried an alt-enter to get to properties, but it must have been the wrong properties because it only had the general tab in it. Would you please tell me the keystrokes involved and where each step should take me to get to those address headers. Thanks. Regards: Ted Larson For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] JAWS and Skype audio ducking?
Hi all, Whenever I make a Skype call from my laptop JAWS audio ducks. Have spoken with the Microsoft Disability Answer desk, level 3, and they can also reproduce this issue. Running JAWS 2018 latest build. Have tested with Narrator and this problem doesn't occur. Any notions as to what to do? Thanks in advance for any assistance rendered. Yours sincerely, Sadam Ahmed JAWS & iOS certified iPhone: + 61 435 892 944 FaceTime, iMessage & email sa...@sadamahmed.com For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/