[Linux-PowerEdge] Smartd and JBoss controller

2020-12-11 Thread Jean-Daniel TISSOT 


[EXTERNAL EMAIL] 


Hi,

The new PowerEdge includes a JBoss RAID controller for 2 small PCI SSDs 
in RAID 1.


I would like to run smartd on these SSDs, but I haven't found out how to 
configure smartctl on them.

Is it possible?

Thank you in advance.

Yours sincerely.

--
Bien cordialement,
Jean-Daniel Tissot - IE CNRS http://chrono-environnement.univ-fcomte.fr
UMR 6249 - Laboratoire Chrono-environnementUMR CNRS-UFC
Université de Franche-Comté, 16 route de Gray, 25030 Besançon Cedex, FRANCE
jean-daniel.tis...@univ-fcomte.fr  tel:+33 3 81 666 440

___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] BIOS legacy boot with BOSS controller card

2020-05-29 Thread Jean-Daniel TISSOT 

[EXTERNAL EMAIL] 

Hi,

We use Proxmox here (Debian based) in UEFI boot mode : works perfectly.

I'm quite sure you must configure your BIOS for UEFI, if you have iDRAC
with SD card, you can upload the Debian ISO on this card and boot on it
via the iDRAC console. Few stuff to configure before booting on this ISO.

Regards.

Le 29/05/2020 à 00:59, mohammad kashif a écrit :
>
> [EXTERNAL EMAIL]
>
> Hi
>
> We bought some Dell R540 servers with BOSS controller card + with 2
> M.2 sticks which is already configured as RAID 1.
> I am trying to install Debian Buster using BIOS and PXE boot but  it
> is getting stuck with "Probing EDD (edd=off to disable ) message".
> I am wondering whether BOSS controller supports legacy BIOS or  I need
> to setup UEFI boot for it.
> This is first time we are using BOSS controller for OS install and our
> setup works for standard raid  so probably we are missing something in
> case of BOSS card.
> Any hint will be appreciated.
> Thanks
> Kashif
>
>
>
>
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement,
Jean-Daniel Tissot - IE CNRS http://chrono-environnement.univ-fcomte.fr
UMR 6249 - Laboratoire Chrono-environnementUMR CNRS-UFC
Université de Franche-Comté, 16 route de Gray, 25030 Besançon Cedex, FRANCE

___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] PowerEdge R410/R610/R810 no longer supported?

2020-05-20 Thread Jean-Daniel TISSOT 

[EXTERNAL EMAIL] 

Hi,

I have the same problem with a R 720 on CentOS 6.10

DELL EMC System Update 1.8.0 Copyright (C) 2014 DELL EMC Proprietary.
Verifying catalog installation ... Installing catalog from repository
... Fetching dsucatalog ... Reading the catalog ... Verifying inventory
collector installation ... Getting System Inventory ... Determining
Applicable Updates ... |DELL EMC System Update---| [ ]
represents 'not selected' [*] represents 'selected' [-] represents
'Component already at repository version (can be selected only if -e
option is used)' Choose: q - Quit without update, c to Commit, 
- To Select/Deselect, a - Select All, n - Select None [ ]1 OpenManage |
iDRAC Service Module Current Version : 3.4.0 Upgrade to : 3.5.1,
Criticality : Optional, Type : Application Enter your choice : a
|DELL EMC System Update---| [ ] represents 'not
selected' [*] represents 'selected' [-] represents 'Component already at
repository version (can be selected only if -e option is used)' Choose:
q - Quit without update, c to Commit,  - To Select/Deselect, a -
Select All, n - Select None [*]1 OpenManage | iDRAC Service Module
Current Version : 3.4.0 Upgrade to : 3.5.1, Criticality : Optional, Type
: Application Enter your choice : c Fetching
Systems-Management_Application_C4NXJ_LN64_3.5.1_A00 ... Installing
Systems-Management_Application_C4NXJ_LN64_3.5.1_A00 Collecting
inventory... . Running validation... OpenManage || iDRAC Service Module
The version of this Update Package is newer than the currently installed
version. Software application name: OpenManage | iDRAC Service Module
Package version: 3.5.1 Installed version: 3.4.0 Executing update...
WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE UPDATE
IS IN PROGRESS. THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!
Unsupported operating system.
Systems-Management_Application_C4NXJ_LN64_3.5.1_A00 could not be
installed. Done! Please run 'dsu --inventory' to check the inventory
Progress report is available at:/usr/libexec/dell_dup/DSU_STATUS.json
Exiting DSU!

Reading https://wiki.centos.org/About/Product, maintenance update EOL is
November 30th, 2020.

Could anybody (especially Dell guys) explain this problem. OMSA version
is 9.3.0

Thanks and best regards


Le 20/05/2020 à 14:10, Stephen John Smoogen a écrit :
>
> [EXTERNAL EMAIL]
>
>
>
> On Wed, 20 May 2020 at 05:12, Dmitry Vereschaka  > wrote:
>
> [EXTERNAL EMAIL]
>
> Hi
>
> It looks like PowerEdge R410/R610/R810 are no longer supported
> with dsucatalog-20.05.00-TRMTW.noarch
>
> When I run dsu with latest invcol/dsucatalog, I get error message
> that "This Platform is not supported.":
>
>
> ... trimmed
>  
>
> There is no such issue on R620/R630, so I guess that support
> for PowerEdge R410/R610/R810  was dropped recently?
>
>
> I believe the x10 series was no longer 'supported' except for special
> contracts 6 or 7? years ago and the x20 series is now entering that
> phase (as several of our x20 systems could not get support renewed
> this year). In the past when that happened various software dropped
> support for the completely EOL hardware because even the special
> contracts were no longer accepted. Sometimes Dell is more 'proactive'
> in dropping this support than others.. 
>
>  
>
> Regards
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com 
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
>
>
> -- 
> Stephen J Smoogen.
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Error in "dsu" call

2020-01-27 Thread Jean-Daniel TISSOT 
po/hardware/dsu/os_independent>
> *
> <https://linux.dell.com/repo/hardware/dsu/mirrors.cgi/osname=sles12=x86_64=1=/>
>
> So, my questions:
> * What might be this ominous "Update Prereq" that I'm missing?
> * Where does the "partial failure" of the "Inventory collector" come from?
>
> A Web Search Engine ;) found the same problem in 2017 on this list. It
> might've been caused by using Scientific Linux and not having installed
> OpenIPMI. But my OS is supported, and I have several IPMI software
> installed:
>
> # rpm -qa '*IPMI*' | sort
> OpenIPMI-2.0.21-10.6.24.x86_64
> OpenIPMI-devel-2.0.21-10.6.24.x86_64
> OpenIPMI-python-2.0.21-10.6.24.x86_64
> # rpm -qa '*ipmi*' | sort
> freeipmi-1.5.7-2.15.x86_64
> ipmitool-1.8.18-5.6.18.x86_64
> libfreeipmi17-1.5.7-2.15.x86_64
> libipmiconsole2-1.5.7-2.15.x86_64
> libipmidetect0-1.5.7-2.15.x86_64
> monitoring-plugins-ipmi-sensor1-1.3-209.1.noarch
> monitoring-plugins-ipmi-sensor2-2.3-100.1.noarch
> monitoring-plugins-ipmi-sensor3-3.13-3.1.noarch
>
> Regards,
> Werner
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Jean-Daniel Tissot - IE CNRS http://chrono-environnement.univ-fcomte.fr
UMR 6249 - Laboratoire Chrono-environnementUMR CNRS-UFC
Université de Franche-Comté, 16 route de Gray, 25030 Besançon Cedex, FRANCE
mailto:jean-daniel.tis...@univ-fcomte.fr   tel:+33 3 81 666 440

___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Proxmox with PERCH H710

2019-12-24 Thread Jean-Daniel Tissot 
Le 23/12/2019 à 19:51, Jerry Warner a écrit :
>
> [EXTERNAL EMAIL]
>
> I had tried running the commands after removing the sudo's but I still wasn't 
> successful.   Based on Jeff Palmer's point that my version Debian isn't 
> listed, I won't move forward with it.
>
> I don't have drac operational. This is my first experience with it so I don't 
> have anything loaded for that either.   So much to learn, so little time.  
> I'm trying to migrate three servers up to Windows 2016 and 2019 because of 
> the drop in Microsoft updates.  They run as VMs on Proxmox but my lack of 
> knowledge of Linux definatly slows me down.
>
> Jerry
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Hi,

You can't use Buster because Dell don't do packages for Buster. Use Stretch.

root@promox : cat 
/etc/apt/sources.list.d/linux.dell.com.sources.list
#
# Monitoring Dell serveur
#
deb http://linux.dell.com/repo/community/openmanage/910/stretch 
stretch main
deb http://linux.dell.com/repo/community/openmanage/911/stretch 
stretch main
deb 
http://linux.dell.com/repo/community/openmanage/iSM/340/stretch/stretch 
main

#
# Megacli
#
deb http://hwraid.le-vert.net/debianbuster  
main

root@proxmox : wget -O - 
http://hwraid.le-vert.net/debian/hwraid.le-vert.net.gpg.key | apt-key add -
root@proxmox : apt update
root@proxmox : apt -y install snmp snmpd snmp-mibs-downloader megacli
root@proxmox : sed -i -e 's/^defaultMonitors/# defaultMonitors/' -e 
's/^linkUpDownNotifications/# linkUpDownNotifications/' -e 's/^smuxpeer/# 
smuxpeer/' /etc/snmp/snmpd.conf
root@proxmox : systemctl restart snmpd.service
root@proxmox : systemctl status snmpd.service
root@proxmox : apt-get -y install srvadmin-all srvadmin-idracadm7 
srvadmin-idracadm8 dcism srvadmin-cm
root@proxmox : chmod 644 /lib/systemd/system/dcismeng.service
root@proxmox : chmod 640 /opt/dell/srvadmin/etc/omarolemap
root@proxmox : /opt/dell/srvadmin/sbin/srvadmin-services.sh restart
root@proxmox : crontab -l

[SNIP]
00 1 * * 0 /root/bin/OmReport.bash > /dev/null 2>&1
00 0 * * 0 /root/bin/UpdateFirmware.bash
0 1 1 * * /root/bin/VerifyRAIDCoherence.bash | mail -s "Vérification de la 
cohérence des disques virtuels en RAID" sysadmin
[SNIP]

For firmware update :

root@proxmox : apt -y install libgpgme11 gawk
root@proxmox : wget 
https://downloads.dell.com/FOLDER05605556M/1/Systems-Management_Application_DVHNP_LN64_1.7.0_A00.BIN
root@proxmox : bash Systems-Management_Application_DVHNP_LN64_1.7.0_A00.BIN
root@proxmox : dsu --version
root@proxmox : dsu -u --import-public-key --source-type=repository 
--source-location=http://ftp.dell.com/catalog/

 

-- 
Jean-Daniel Tissot - IE CNRS http://chrono-environnement.univ-fcomte.fr
UMR 6249 - Laboratoire Chrono-environnementUMR CNRS-UFC
Université de Franche-Comté, 16 route de Gray, 25030 Besançon Cedex, FRANCE
mailto:jean-daniel.tis...@univ-fcomte.fr  tel: +33 3 81 666 440

#!/bin/bash
 
# ~
# Company name - Division name - Project name
# ~
# HallOfTips - 04/05/2012 - HardChk.bash - 1.8
# -
# This script use the dell omreport & omconfig to check hardware status
# ~
 
#
# HOW-TO
#
# This script print its results to a text file ($TmpFile), that is either sent 
as an email (default behaviour) or printed to stdout (using the "-p" option).
#+ It could also clear given logs with the "-c " option
#
# Each hardware components status are retrieved using the omreport dell 
utility, for each hardware component the status might of 4 kind :
#   1 - Ok   = The component is in perfect condition
#   2 - Non-Critical = The component is NOT in perfect condition but is also 
not about to fail
#   3 - Critical = The component might be about to fail, you should fix the 
reported problem ASAP !
#   4 - Not found= The component was not found, this is the standard 
behaviour from the omreport utility
 
#
# TODO
#
 
#
# ChangeLog
#
 
## V1.8 (30/07/12)
# - Modded most of the shitty construct ""while read" +"echo line" + "read 
$line""
# - Added tac command to reverse the log display
 
## V1.7 (25/07/12)
# - Added BIOS settings check (Maximum Performance as power management profile)
# - Added CPU settings check (Turbo Mode & HyperThreading)

Re: [Linux-PowerEdge] [Security Alert] srvadmin-jre-9.3.0-3465.14818.el7.x86_64 vulnerable

2019-12-04 Thread Jean-Daniel TISSOT 
Hello Puneet,

Could we expect OMSA 9.4 for Debian Buster too ?

Thanks in advance.

Best regards, Jean-Daniel Tissot

Le 04/12/2019 à 15:14, puneet.sa...@dell.com a écrit :
> Hello Zbigniew,
>
> Thank you for reaching out to us.
>  
> The reported issue will be addressed in the upcoming OpenManage Server 
> Administrator 9.4 release which will be releasing by end of December 2019.
>
> Thanks and Regards,
> Puneet Sapra - Dell EMC
>
> Date: Wed, 27 Nov 2019 21:03:45 +0100
> From: "mr.zbiggy" 
> To: linux-poweredge@dell.com
> Subject: [Linux-PowerEdge] [Security Alert]
>   srvadmin-jre-9.3.0-3465.14818.el7.x86_64 vulnerable
> Message-ID: <39c23c96-e43b-9f36-c48e-1e9dd977e...@upcpoczta.pl>
> Content-Type: text/plain; charset="utf-8"
>
>
> [EXTERNAL EMAIL] 
>
> Hi,
>
> Nessus Security Scanner:
> CRITICAL 1000 Oracle Java JRE Unsupported Version Detection (Unix) MEDIUM 500 
> Oracle Java SE Multiple Vulnerabilities (July 2018 CPU) (Unix) The following 
> Java JRE installation is unsupported :
>
> Path  : /opt/dell/srvadmin/lib64/openmanage/
> Installed version : 1.10.0_1
> Latest versions   : 1.8.0_211 / 1.11.0_03 / 1.12.0_1
> Support dates : 2018-10-01 (end of life)
>
> This outdated, unsupported java is installed by package:
> srvadmin-jre-9.3.0-3465.14818.el7.x86_64
>
> Description:
> According to its self-reported version number, at least one installation of 
> Oracle (formerly Sun) Java JRE on the remote host is no longer supported. 
> Lack of support implies that no new security patches for the product will be 
> released by the vendor. As a result, it is likely to contain security 
> vulnerabilities. Note that Oracle does provide support contracts under the 
> 'Oracle Lifetime Support' program. If the detected JRE is supported under 
> this program, this may be a false positive.
>
> Diagnosis:
> The remote host contains one or more unsupported versions of the Oracle Java 
> JRE.
>
> Solution:
> Upgrade to a version of Oracle Java JRE that is currently supported.
>
> greetings,
> Zbigniew
>
>
>
> --
>
> Subject: Digest Footer
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
> --
>
> End of Linux-PowerEdge Digest, Vol 180, Issue 13
> 
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

[Linux-PowerEdge] Linux Dell site

2018-08-28 Thread Jean-Daniel TISSOT 
Hi list, hi @dell.com

Is linux.dell.com down ?

Best regards.
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

[Linux-PowerEdge] DSU catalog and DSU for Debian.

2018-05-01 Thread Jean-Daniel Tissot 

Hi Sashi, hi Dell team, hi list,

It's certainly a stupid question, but why update the DSU catalog only once a 
month?
Most Linux distributions update their repositories whenever necessary, 
especially when they find patches for security vulnerabilities.
Spectre and Meltdown vulnerabilities need fixes quickly but of course correctly 
tested.
Making patches available only once a month like Microsoft, Adobe or Oracle for 
example, is it a good idea?
Would not it be wise to have a higher frequency (once a week)?

On the other hand, most of our servers are under Debian, I have not managed to 
use DSU successfully on these servers. I have browsed part of the documentation 
concerning DSU without finding how to install and use it  (I have of course 
downloaded the catalog for Ubuntu). Is it compatible with Debian?
The only solution we have is to restart our servers under Lifecycle to see if 
new firmwares are available and thus making our services unavailable for a 
significant time. On our server under CentOS, I can test if firmware updates 
are available and scheduled at a time more conducive to these updates.

Any help would be welcome.

Kind regards.
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

[Linux-PowerEdge] Debian Stretch DSU and OMSA was ubuntu vs dsu

2018-02-28 Thread Jean-Daniel TISSOT 
Hi Sashi,

Trying to install Dell System Update on a PE R420 running Debian
Stretch. installation was successful.
But launching dsu failed with missing libraries libssl.so.1.0.0 and
libcrypto.so.1.0.0.
I try to make symbolic links :
libssl.so.1.0.0 -> libssl.so.1.0.2 (I have the choice between 1.0.2 and 1.1)
libcrypto.so.1.0.0 -> libcrypto.so.1.0.2 (I have the choice between
1.0.2 and 1.1)
But it failed again with mismatch version of OPENSSL :

dsu: /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0: version `OPENSSL_1.0.1' not 
found (required by /usr/lib/dsulib/libcurl.so.4)
dsu: /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0: version `OPENSSL_1.0.0' not 
found (required by /usr/lib/dsulib/libcurl.so.4)
dsu: /usr/lib/x86_64-linux-gnu/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not 
found (required by /usr/lib/dsulib/libcurl.so.4)

Could you provides needed libraries in your packages in /usr/lib/dsulib ?

It will be nice to have dsu running on Debian too.

Trying on Debian Jessie, installation was successful too, but running
dsu failed with error :

root@chrono-xen:~ # dsu
DELL EMC System Update 1.5.2
Copyright (C) 2014 DELL EMC Proprietary.
Verifying catalog installation ...
Installing catalog from repository ...
Fetching dsucatalog ...
Could not download the catalog. Please check the configuration
Exiting DSU!

How to configure dsu on Debian Jessie ?

But more important, Stretch has been available from June 2017 and we are
waiting for a DSU and OMSA running on the current version of this
operating system. On this mailing list I'm not alone to wait for theses
packages.
How can we help ?

Thanks in advance.

Regards Jean-Daniel.


Le 28/02/2018 à 05:42, sash...@dell.com a écrit :
>
> Hi,
>
>  
>
> The one you are referring to (dell-system-update rpm) and bash cgi
> script/rpm based repositories, are for RedHat based Linux Operating
> Systems only.
>
>  
>
> For Ubuntu based Operating Systems, you need to use the Dell Update
> Package available at
> https://downloads.dell.com/FOLDER04748790M/1/Systems-Management_Application_T50FD_LN64_1.5.2_A00.BIN
>
>
>  
>
> The Update Package automatically detects the operating system flavor
> and installs the .deb package if it’s an Ubuntu flavor.
>
>  
>
> Regards,
>
> Sashi
>
>  
>
> *From:*jsl6uy js16uy [mailto:js1...@gmail.com]
> *Sent:* Wednesday, February 28, 2018 9:24 AM
> *To:* K, Sashi 
> *Cc:* linux-poweredge-Lists 
> *Subject:* Re: [Linux-PowerEdge] ubuntu vs dsu
>
>  
>
> Ah understood
>
> thanks very much! for the clarification and the argument to dsu
>
> and I will take you up on further queries, thanks
>
> So we sync locally for rpm installs, so as not to have to hit your
> mirror everytime we do an update, work great btw, would like to do
> similar for ubu
>
> So...how do you envision this playing out for ubuntu?
>
> I install yum and then install dell-system-update rpm, then run dsu?
>
> Or do you see for ubuntu running the wget dump into bash cgi script,
> then run dsu?
>
> Again, would prefer a accepted way/accepted variant for installing on
> ubu from internal mirrror
>
>  
>
> thanks again and best regards
>
>  
>
>  
>
> On Tue, Feb 27, 2018 at 9:37 PM,  > wrote:
>
> Hi,
>
> While using DSU on a Ubuntu based Operating System, DSU by default
> picks up the catalog file available at
> https://linux.dell.com/repo/hardware/ubuntu/catalog/ unless or
> until a custom catalog is supplied using option like
> --source-location.
>
> Otherwise, rest of the DSU operations remain the same without any
> change. Please let us know if you have more queries.
>
> Regards,
> Sashi
>
> -Original Message-
> From: linux-poweredge-bounces-Lists On Behalf Of
> linux-poweredge-request-Lists
> Sent: Wednesday, February 28, 2018 4:30 AM
> To: linux-poweredge-Lists  >
> Subject: Linux-PowerEdge Digest, Vol 165, Issue 16
>
> Send Linux-PowerEdge mailing list submissions to
>         linux-poweredge@dell.com 
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://lists.us.dell.com/mailman/listinfo/linux-poweredge
> or, via email, send a message with subject or body 'help' to
>         linux-poweredge-requ...@dell.com
> 
>
> You can reach the person managing the list at
>         linux-poweredge-ow...@dell.com
> 
>
> When replying, please edit your Subject line so it is more
> specific than "Re: Contents of Linux-PowerEdge digest..."
>
>
> Today's Topics:
>
>    1.  IPMI SOL problem on C2100 (Daniel Cantar?n)
>    2.  ubuntu vs dsu (jsl6uy js16uy)
>    3.  MegaCLI compatibility in StorCli (with added     typos) ?
>       (vinc...@cojot.name

Re: [Linux-PowerEdge] ETA for Debian 9 (Stretch) support ?

2017-12-15 Thread Jean-Daniel Tissot 

*And waiting for DSU for Debian too.*

Le 15/12/2017 à 09:00, JdT a écrit :

+1 for at least 6 servers
Le 14/12/2017 à 08:43, Dirk Hartmann a écrit :



--On Thursday, December 14, 2017 08:35:50 AM +0100 Eneko Lacunza 
<elacu...@binovo.es> wrote:


Hi,

We're waiting too :)


same here


El 12/12/17 a las 16:08, Xavier Bachelot escribió:

Hi,

OpenManage support for Debian 9 Stretch was hinted to happen in
December 2017. We're already middle of December, is that still on
schedule ? Debian 9 is 6 months old already...

Regards,
Xavier


___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge



--
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

UMR et tutelles

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>


___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge



--
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

UMR et tutelles

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] DSU 1.4.2 and CentOS 7.3

2017-08-29 Thread Jean-Daniel Tissot 
Le 29/08/2017 à 20:49, Nick Pais a écrit :
> Hello,
>
> Agreed, DSU for Debian Stretch would be helpful!
>
It's not very good for us to stop ours servers and test with Lifecycle to know 
if ours firmwares are up to date

DSU will help us to check if we need to update something in ours servers.

Please help us to have a good experience of Dell servers on others OS.
Thanks in advance.

Regards, Jean-Daniel.
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] DSU 1.4.2 and CentOS 7.3

2017-08-29 Thread Jean-Daniel Tissot 
Le 29/08/2017 à 16:01, sash...@dell.com a écrit :
> Hi,
>
> There's been a slight delay in our release.
> We'll release DSU 1.5.0 on 6th of September 2017.
>
> Regards,
> Sashi
>
Hi,

Good news for Red Hat or CentOS  admin (I have only one server with CentOS).

Do you plan to develop DSU for Debian / Ubuntu (I have many servers on Debian 
or Proxmox and I'm surely not the only one) ?

Regards,
Jean-Daniel

___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] [E] Problem with DSU on RHEL 6.8

2017-04-26 Thread Jean-Daniel TISSOT 
Hi,

I had to unmount /tmp/SECUPD several times (2 or 3) before /tmp/SECUPD is 
really unmounted.


Le 26/04/2017 à 12:05, Guillaume Courtois a écrit :
>
> Hi,
>
> I had indeed that /tmp/SECUPD mounted, so I unmounted it. But that did not 
> the trick, unfortunately.
>
> Thanks anyway.
>
> Bye.
>
> Le 26/04/2017 11:53, Karsten Suehring a écrit :
>
>> Hi,
>>
>> check, if /tmp/SECUPD is mounted before running. I've seen this cause 
>> parsing issues with the inventory. You can just unmount it (see other 
>> threads on the list for details).
>>
>> BR,
>> Karsten
>>
>> On Wed, Apr 26, 2017 at 9:40 AM, Guillaume Courtois <gui...@gugux.net 
>> <mailto:gui...@gugux.net>> wrote:
>>
>>
>> Hi,
>>
>> Yes both repos are enabled, the os_independent one and the RHEL 6 one. 
>> And it works well as I see that dsu reinstalls the invcol and/or dsucatalog 
>> packages when needed.
>>
>> Thanks anyway for the info !
>>
>> Bye.
>>
>>
>> Le 25/04/2017 23:47, scott.j.kings...@verizon.com 
>> <mailto:scott.j.kings...@verizon.com> a écrit :
>>
>> Hi,
>>
>> Check your repository and make sure it's enabled.   enabled=1in
>> the repo file.  When you have a local repository the dsu command 
>> needs
>> to be able to use the repository and it has to be enabled.
>>
>> Best Regards,
>> Scott
>>
>> -Original Message-
>> From: linux-poweredge-boun...@dell.com 
>> <mailto:linux-poweredge-boun...@dell.com>
>> [mailto:linux-poweredge-boun...@dell.com 
>> <mailto:linux-poweredge-boun...@dell.com>] On Behalf Of Guillaume
>> Courtois
>> Sent: Tuesday, April 25, 2017 6:49 AM
>> To: linux-poweredge@dell.com <mailto:linux-poweredge@dell.com>
>> Subject: [E] [Linux-PowerEdge] Problem with DSU on RHEL 6.8
>>
>>
>> Hi guys,
>>
>> I'm trying to have DSU working of some Dell Poweredge r730xd servers,
>> but despite trying all manipulations I could find here and there, I
>> stll get the infamous "Could not parse the inventory" message.
>>
>> FYI, I have made a mirror of the Dell repository, and packages are
>> installed from there.
>>
>> Whenever I run dsu -i, the trace of the process tells me that it 
>> opens
>> and reads the first block of the inv.xml file, then immediately after
>> that it fails with the error message.
>>
>> The content of the file seems ok to me :
>>
>> 
>>
>>
>> 
>>  > majorVersion="redhat-release-server-6Server"
>> minorVersion="2.6.32-642.el6.x86_64"/>
>>  > display="OpenManage Server Administrator">
>>
>> etc ...
>>
>> I have tried removing the binary file, running it on a command line 
>> to
>> feed the resulting file to dsu, removing and reinstalling all
>> packages, ... Nothing works and I'm running out of ideas.
>>
>>     If you have any new idea on that problem I'm willing to test it !
>>
>> Thanks and bye.
>>
>>
>> ___
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge@dell.com <mailto:Linux-PowerEdge@dell.com>
>> https://lists.us.dell.com/mailman/listinfo/linux-poweredge 
>> <https://lists.us.dell.com/mailman/listinfo/linux-poweredge>
>>
>
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cedex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>

___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Debian-Jessie-Upgrade srvadmin-hapi 8.3.0-1 -> 8.4.0-1 fails

2016-11-21 Thread Jean-Daniel TISSOT 
Hi,

For me I had to remove all srvadmin packages via dselect

Apt-get purge srv-admin.* don't work


Le 21/11/2016 à 10:27, Stephan Müller a écrit :
> Hi,
> I had a similar issue (7.4 -> 8.3), DELL tells you to remove the old 
> installation before installing a new version. So they are somehow aware 
> of the broken update process.. :(
> Actually, this particular issue was solved for me by removing all 
> srvadmin packages first.
>
>   ~stephan
>
> On 21.11.2016 09:48, Bjoern Laessig wrote:
>> Hi,
>>
>>  while upgrading srvadmin-hapi from 8.3.0-1 to 8.4.0-1 the installation
>> fails on Debian Jessie with following output.
>>
>> //——
>> root@holodeck08:~# apt-get install -f
>> Reading package lists... Done
>> Building dependency tree
>> Reading state information... Done
>> Correcting dependencies... Done
>> The following extra packages will be installed:
>>   srvadmin-hapi
>> The following packages will be upgraded:
>>   srvadmin-hapi
>> 1 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
>> 9 not fully installed or removed.
>> Need to get 0 B/298 kB of archives.
>> After this operation, 7,168 B disk space will be freed.
>> Do you want to continue? [Y/n]
>> Reading changelogs... Done
>> (Reading database ... 76268 files and directories currently installed.)
>> Preparing to unpack .../srvadmin-hapi_8.4.0-1_amd64.deb ...
>> dpkg: error processing
>> archive /var/cache/apt/archives/srvadmin-hapi_8.4.0-1_amd64.deb
>> (--unpack):
>>  subprocess new pre-installation script returned error exit status 127
>> Processing triggers for libc-bin (2.19-18+deb8u6) ...
>> Errors were encountered while processing:
>>  /var/cache/apt/archives/srvadmin-hapi_8.4.0-1_amd64.deb
>> —\\—
>>
>> The preinstall script has changed:
>> —//—
>> --- /var/lib/dpkg/info/srvadmin-hapi.preinst 2016-11-21
>> 09:30:57.542081214 +0100
>> +++ preinst  2016-10-28 12:25:06.0 +0200
>> @@ -1,10 +1,9 @@
>>  set -e
>>
>> -sysconfdir=/etc/rc.d
>> +sysconfdir=/etc
>>  srvadmin_prefix=/opt/dell/srvadmin
>>  srvadmin_sysconfdir=/etc/${srvadmin_prefix}
>>  srvadmin_initscriptdir=${sysconfdir}/init.d
>> \\—
>> but there is no File /etc/init.d/instsvcdrv which leads to file not
>> found and exit code 127.
>>
>> Workaround:
>>
>> a symlink from /etc/init.d/instsvcdrv -> /etc/rc.d/init.d/instsvcdrv
>>
>> After that, the installation succeeds, but omreport fails with:
>>
>> ———//—
>> root@holodeck06:/var/lib/dpkg/info# omreport chassis memory
>> Memory Information
>>
>> Error : Memory object not found
>>
>> ———\\—
>>
>> I write another mail when i have found the reason for this.
>>
>> Björn Lässig
>>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cedex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Error messages after updating OMSA

2016-10-25 Thread Jean-Daniel TISSOT 
Hi,

On a Centos server I have to do two times umount /tmp/SECUPD for resolve this. 
By cron I search if new firmwares are available once a week  and each time I 
have the same errors.


Le 25/10/2016 à 10:31, Sebastian Luna Valero a écrit :
>
> Hello,
>
> I have setup our PowerEdge nodes with the DSU repository to have OMSA 
> up-to-date:
> http://linux.dell.com/repo/hardware/dsu/
>
> After updating to version "srvadmin-*-8.4.0-2193.9883.el6.x86_64" I am 
> getting the following:
>
> * Some nodes with df -h:
> /dev/sdb  1.1M 0  1.1M   0% /tmp/SECUPD
>
> * Some nodes with df -h:
> /dev/sdb  1.1M 0  1.1M   0% /tmp/SECUPD
> /dev/sdc  1.1M 0  1.1M   0% /tmp/SECUPD
>
> * Error messages with "df -h":
> df: `/tmp/SECUPD': Input/output error
> df: `/tmp/SECUPD': Input/output error
>
> * Various error messages with "tail /var/log/messages":
> kernel: FAT: FAT read failed (blocknr 1)
> kernel: FAT: Directory bread(block 36) failed
> kernel: VFS: busy inodes on changed media or resized disk sdb
>
> I have tried these steps:
> # srvadmin-services.sh stop
> # umount /tmp/SECUPD
> # srvadmin-services.sh start
>
> but the problem still remains.
>
> Could you please let me know what else should I try?
>
> Best regards,
> Sebastian.
>
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cedex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Perc H700 firmware upgrade Debian

2016-05-24 Thread Jean-Daniel TISSOT 
There is another way, we use box to download ISO.

For example https://dell.app.box.com/v/bootabler410 for a R410 and maybe T410
Just change the number to correspond to your server. I use it for R410, R420, 
R710 and R720.

Later Dell will certainly provide DSU for maintaining Firmware up-to-date, I 
remember later in 2016. So.

For us to, Debian is more important, but we have no choice in our 
administration to choose the vendors.



Le 24/05/2016 à 18:00, Helmut Wollmersdorfer a écrit :
>
> Hi,
>
>
>> Am 24.05.2016 um 17:34 schrieb Jean-Daniel TISSOT 
>> <jean-daniel.tis...@univ-fcomte.fr 
>> <mailto:jean-daniel.tis...@univ-fcomte.fr>>:
>>
>> Hi,
>>
>> If you have a iDRAC Enterprise, you can boot on Life Cycle to upgrade your 
>> firmware.
>> I am on Debian too and as DLR is no more supported by Dell, there is no 
>> simple way to upgrade firmware.
>>
> I do not have iDRAC Enterprise.
>
> Will try it with a bootable USB or keep it as is.
>
> Debian is more important than the hardware vendor for me. So the next servers 
> will be ones easier to maintain under Debian.
>
> Helmut Wollmersdorfer
>
>
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Perc H700 firmware upgrade Debian

2016-05-24 Thread Jean-Daniel TISSOT 
Hi,

If you have a iDRAC Enterprise, you can boot on Life Cycle to upgrade your 
firmware.
I am on Debian too and as DLR is no more supported by Dell, there is no simple 
way to upgrade firmware.


Le 24/05/2016 à 13:55, Helmut Wollmersdorfer a écrit :
> Hi,
>
> tried to upgrade Perc H700 Integrated firmware on Debian (Wheezy).
>
> # /opt/dell/srvadmin/bin/omreport about
>
> Product name : Dell OpenManage Server Administrator
> Version  : 7.4.0-1
> Copyright: Copyright (C) Dell Inc. 1995-2013 All rights reserved.
> Company  : Dell Inc.
>
>
> # /opt/dell/srvadmin/bin/omreport storage controller
> Controller  PERC H700 Integrated (Slot 4)
>
> Controllers
> ID: 0
> Status: Non-Critical
> Name  : PERC H700 Integrated
> Slot ID   : PCI Slot 4
> State : Degraded
> Firmware Version  : 12.10.1-0001
> Latest Available Firmware Version : 12.10.5-0001
> Driver Version: 00.00.06.12-rc1
> Minimum Required Driver Version   : Not Applicable
> Storport Driver Version   : Not Applicable
> Minimum Required Storport Driver Version  : Not Applicable
> […]
>
> # cat /etc/debian_version 
> 7.9
>
>
> # wget 
> http://downloads.dell.com/FOLDER03292779M/4/SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN
>
> # chmod 777 SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN
>
> # bash ./SAS-RAID_Firmware_2948G_LN_12.10.7-0001_A13_02.BIN --extract RAIDFW
> # cd RAIDFW/
> # ./sasdupie -u -s payload/
>  lang="en">0
>
> There is no “The operation was successful” and 
> “1” as answer of the last step. So it went 
> wrong.
>
>
> Is it possible to upgrade from the shell? How can I upgrade else?
>
> TIA
>
> Helmut Wollmersdorfer
>
>
> ___________
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Debian DLR packages was OMSA 8.3 for Ubuntu lacks racadm tools

2016-05-11 Thread Jean-Daniel TISSOT 
Hi Soorej,

Unfortunately DSU is not yet available for Debian or Ubuntu.
As long as I know, even the docker file is not able to upgrade firmware, but 
maybe new version of the DSU container permit that ?
So I need to verify my firmware one a week without stopping my VMs to enter 
Life Cycle process.

Le 11/05/2016 14:52, soorej_ponna...@dell.com a écrit :
> Dell - Internal Use - Confidential
> Hi,
>
> The DLR repository is deprecated. Please use DSU repository at 
> http://linux.dell.com/repo/hardware/dsu/. The procedure to install/update 
> OMSA is documented in that page.
>
> Soorej Ponnandi
> Dell | Change Management
> office +  91 80 2807 7759 Extn: 78469
>
> From: linux-poweredge-bounces-Lists On Behalf Of Jean-Daniel TISSOT
> Sent: Wednesday, May 11, 2016 4:44 PM
> To: R, Chandrasekhar <chandrasekha...@dell.com>; linux-poweredge-Lists 
> <linux-powere...@lists.us.dell.com>
> Subject: Re: [Linux-PowerEdge] Debian DLR packages was OMSA 8.3 for Ubuntu 
> lacks racadm tools
>
> Hi Chandra,
>
> Thanks, I had found all I need for OMSA 8.3 and it works for me.
> But where can I find DLR package to have update_firmware command available ?
>
> I explore repository without found any packages related to DLR.
> Are they in 
> http://linux.dell.com/repo/community/debian/pool/jessie/openmanage/830/OMSA/suppl/
>  ?
>
> Regards,
> Jean-Daniel.
> Le 11/05/2016 04:01, 
> chandrasekha...@dell.com<mailto:chandrasekha...@dell.com> a écrit :
> Hi,
>
> Kindly use the following repository for installing latest OMSA on 
> Ubuntu/Debain.
> http://linux.dell.com/repo/community/ubuntu
>
> or
> http://linux.dell.com/repo/community/debian
>
> Regards
> Chandra
>
> --
> Bien cordialement, Jean-Daniel 
> TISSOT<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
> Administrateur Systèmes et Réseaux
> Tel: +33 3 81 666 440 Fax: +33 3 81 666 568
>
> Laboratoire Chrono-environnement<http://chrono-environnement.univ-fcomte.fr/>
> 16, Route de Gray
> 25030 BESANÇON Cédex
>
> Plan et 
> Accès<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

[Linux-PowerEdge] Missing description in package dell-ie-idrac7

2016-05-11 Thread Jean-Daniel TISSOT 
Hi Dell packagers,

On Debian, I have a not very important issue but which can be certainly 
corrected by packagers :
warning: parsing file '/var/lib/dpkg/status' near line 16730 package 
'dell-ie-idrac7':  missing description
It's make noise on my output of batch files. Yes, I known that I can use grep 
-v but it will be nice that this small problem is corrected.

Regards,
Jean-Daniel

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Debian DLR packages was OMSA 8.3 for Ubuntu lacks racadm tools

2016-05-11 Thread Jean-Daniel TISSOT 
Hi Chandra,

Thanks, I had found all I need for OMSA 8.3 and it works for me.
But where can I find DLR package to have update_firmware command available ?

I explore repository without found any packages related to DLR.
Are they in 
http://linux.dell.com/repo/community/debian/pool/jessie/openmanage/830/OMSA/suppl/
 ?

Regards,
Jean-Daniel.

Le 11/05/2016 04:01, chandrasekha...@dell.com a écrit :
>
> Hi,
>
>  
>
> Kindly use the following repository for installing latest OMSA on 
> Ubuntu/Debain.
>
> http://linux.dell.com/repo/community/ubuntu
>
> or
>
> http://linux.dell.com/repo/community/debian
>
>  
>
> Regards
>
> Chandra
>

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

[Linux-PowerEdge] Yet another question for Debian

2016-05-10 Thread Jean-Daniel TISSOT 
Hi,

I use the procedure that  Claudio Cesar Sanchez Tejeda posted (Mon, 12 Nov 2012 
13:40:06 -0300) in this list for having firmwares up-to-date.
I need some packages to have update_firmware functioning. To get it I need to do
apt-get install libsmbios python-smbios smbios-utils
apt-get install dell-ft-ie-interface firmware-addon-dell firmware-extract 
firmware-tools libsmal0
apt-get install dell-ie-bios dell-ie-nic-intel dell-ie-idrac7 
dell-ie-nic-qlogic dell-ie-nitrogen dell-ie-maser dell-ie-oxygen \
dell-ie-maser-diags dell-ie-pcissd dell-ie-maser-dp dell-ie-ps 
dell-ie-maser-inv-lcl dell-ie-rac-5 dell-ie-maser-usc \
dell-ie-sas dell-ie-nic-broadcom dell-ie-tape-ibm dell-ie-nic-emulex 
dell-ie-tape-quantum

for firmware in $(bootstrap_firmware -a); do apt-get install $firmware; done

But on a freshly reinstalled R410 with Debian / Jessie, I can't any-more find 
these packages.
I have successfully installed OMSA 8.3, but as long as DSU is not ported to 
Debian / Ubuntu, I have to use the old DLR.

Is there anyone which solve this problem ?

Thanks in advance.

Kind Regards,
Jean-Daniel.
 
-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] OMSA for Debian / Ubuntu

2016-05-04 Thread Jean-Daniel TISSOT 
Another stuff very strange, you add some users in 
/opt/dell/srvadmin/etc/omarolemap as administrators it's doesn't work as long 
as you don't change the file mode to at least 640.
If others as right to read the file, additional users as considered as User not 
Admin.
It's must be corrected by Dell.

Le 04/05/2016 17:13, Jean-Daniel TISSOT a écrit :
> Bonjour Joël,
>
> Thanks a lot, it's work with wheezy release but quite strange it's don't work 
> following instruction from Dell.
>
> Le 04/05/2016 16:46, Joel Golliet a écrit :
>> Le 04/05/2016 16:25, Jean-Daniel TISSOT a écrit :
>>> Hi,
>>>
>>> Trying to install OMSA on a freshly installed Jessie 8.4 on a R420 
>>> following instruction from http://linux.dell.com/repo/community/ubuntu/, I 
>>> have a problem with this entry : *deb 
>>> http://linux.dell.com/repo/community/ubuntu precise openmanage/740*.
>>> No way to find openmanage/740/binary-amd64/Packages in 
>>> http://linux.dell.com/repo/community/ubuntu/dists/jessie/Release with 
>>> apt-get update.
>>> When I go to 
>>> http://linux.dell.com/repo/community/ubuntu/dists/jessie/openmanage/, I 
>>> just see 810 or 820 directory entries, but Packages files for binary-amd64 
>>> are empty.
>>>
>>> How can I install OMSA on this server ?
>>>
>>> Best regards.
>>
>> Hi (bonjour ;-) ) Jean-Daniel,
>>
>> you can use this entry i think :
>> deb http://linux.dell.com/repo/community/ubuntu wheezy openmanage/740
>>
>> (files are in 
>> http://linux.dell.com/repo/community/ubuntu/pool/wheezy/openmanage/740/OMSA/amd64/
>>  directory)
>>
>> I just tried it on a debian jessie and install is ok. After that, with a 
>> "/opt/dell/srvadmin/sbin/srvadmin-services.sh start"
>> i could ask for a "omreport chassis" and everything seems ok.
>>
>> B.R.
>> -- 
>> Signature email
>>  
>>
>> • *Joël GOLLIET |* *Ingénieur Infrastructure et Système*
>> • Tel : +33 4 86 11 37 08 | joel.goll...@2lm.fr
>> • 2L Multimedia - Park Nord, Les Pléiades, 74370 - Epagny-Metz-Tessy - FRANCE
>>
>>  Pensez à l'environnement, n'imprimez cet e-mail qu'en cas de réelle 
>> nécessité
>>
>
> -- 
> Bien cordialement, Jean-Daniel TISSOT 
> <http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
> Administrateur Systèmes et Réseaux
> Tel: +33 3 81 666 440 Fax: +33 3 81 666 568
>
> Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
> 16, Route de Gray
> 25030 BESANÇON Cédex
>
> Plan et Accès 
> <https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] OMSA for Debian / Ubuntu

2016-05-04 Thread Jean-Daniel TISSOT 
Bonjour Joël,

Thanks a lot, it's work with wheezy release but quite strange it's don't work 
following instruction from Dell.

Le 04/05/2016 16:46, Joel Golliet a écrit :
> Le 04/05/2016 16:25, Jean-Daniel TISSOT a écrit :
>> Hi,
>>
>> Trying to install OMSA on a freshly installed Jessie 8.4 on a R420 following 
>> instruction from http://linux.dell.com/repo/community/ubuntu/, I have a 
>> problem with this entry : *deb http://linux.dell.com/repo/community/ubuntu 
>> precise openmanage/740*.
>> No way to find openmanage/740/binary-amd64/Packages in 
>> http://linux.dell.com/repo/community/ubuntu/dists/jessie/Release with 
>> apt-get update.
>> When I go to 
>> http://linux.dell.com/repo/community/ubuntu/dists/jessie/openmanage/, I just 
>> see 810 or 820 directory entries, but Packages files for binary-amd64 are 
>> empty.
>>
>> How can I install OMSA on this server ?
>>
>> Best regards.
>
> Hi (bonjour ;-) ) Jean-Daniel,
>
> you can use this entry i think :
> deb http://linux.dell.com/repo/community/ubuntu wheezy openmanage/740
>
> (files are in 
> http://linux.dell.com/repo/community/ubuntu/pool/wheezy/openmanage/740/OMSA/amd64/
>  directory)
>
> I just tried it on a debian jessie and install is ok. After that, with a 
> "/opt/dell/srvadmin/sbin/srvadmin-services.sh start"
> i could ask for a "omreport chassis" and everything seems ok.
>
> B.R.
> -- 
> Signature email
>   
>
> • *Joël GOLLIET |* *Ingénieur Infrastructure et Système*
> • Tel : +33 4 86 11 37 08 | joel.goll...@2lm.fr
> • 2L Multimedia - Park Nord, Les Pléiades, 74370 - Epagny-Metz-Tessy - FRANCE
>
>   Pensez à l'environnement, n'imprimez cet e-mail qu'en cas de réelle 
> nécessité
>

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] latest link changed - now pointing to DSU

2016-04-26 Thread Jean-Daniel TISSOT 
Hi Soorej,

What about Debian-like OS ?
Is there a plan to port DSU to these (I know ; unsupported) OS ?
I'm certainly not the only one to use Debian or Ubuntu server on Dell servers.

On 25/04/2016 15:43, soorej_ponna...@dell.com wrote :
>
> *Dell - Internal Use - Confidential *
>
> Hi,
>
>  
>
> Many users are unaware of the deprecation of old Dell Linux 
> Repository and still uses it through ‘latest’ link. To avoid the confusion, 
> we have changed the link to the latest DSU repository which is the 
> replacement of Dell Linux Repository.
>
>  
>
> The steps to upgrade OMSA is provided in 
> http://linux.dell.com/repo/hardware/dsu/. When migrating from old DLR to DSU, 
> even though the OMSA upgrade method should work, a clean install is preferred.
>
>  
>
> Thanks,
>
> Soorej
>
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] racadm not working on CentOS 7.2 + idrac8

2016-04-07 Thread Jean-Daniel TISSOT 
Thanks Giulio, it solve my problem.


Le 07/04/2016 00:21, Giulio a écrit :
> Thanks!  Installing srvadmin-idracadm7 fixed it.
>
>

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

[Linux-PowerEdge] Update Failure: Secure Copy Failure

2016-03-29 Thread Jean-Daniel TISSOT 
Hi,

Updating firmware by the old way : update_firmware (it's a R420 with Debian / 
Xen so i can't use DSU)

I have a problem :

# update_firmware -y
..
Checking 32 Bit Diagnostics, 5158A3, 5158.2 - 5158a3
Available: dell_dup_componentid_00196 - 5162a0
Found Update: dell_dup_componentid_00196 - 5162a0

Found firmware which needs to be updated.

Running updates...
|   Installing dell_dup_componentid_00196 - 5162a0Installation failed for 
package: dell_dup_componentid_00196 - 5162a0
aborting update...

The error message from the low-level command was:

Update Failure: Secure Copy Failure - The Secure copy function has failed

How can I install Dell Diagnostics ?



-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] DSU upgrade issue BIOS/iDRAC

2016-03-23 Thread Jean-Daniel TISSOT 
sion : 7.10.64 ) 9. 
> NetXtreme BCM5720 Gigabit Ethernet PCIe (em3) ( Version : 7.10.64 ) 10. 
> NetXtreme BCM5720 Gigabit Ethernet PCIe (em4) ( Version : 7.10.64 )
>
> --
> Henrik Schmiediche, Ph.D. '93
> Director of Information Technology, College of Science Instructional 
> Associate Professor, Statistics
> hen...@tamu.edu Phone: 979 845-3141
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge
>
>
>
> ___
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] EXT : R720 DSU and iDRAC version

2016-03-22 Thread Jean-Daniel TISSOT 
In fact usb_storage module is loaded at boot but dsu failed to upgrade iDRAC.
Don't understand why ?


Le 22/03/2016 05:03, santosh_g...@dell.com a écrit :
> Dell - Internal Use - Confidential
> Thanks for sharing the screenshot.
>
> The USB interface is used to update iDRAC firmware so the usb_storage driver 
> should be enabled and loaded to update the iDRAC firmware on the system.  The 
> console message are displayed by operating system to show USB connection 
> status.  Please ignore these message as they do not affect the system
>
> Thanks
> Santosh
>
> From: linux-poweredge-bounces-Lists On Behalf Of Jean-Daniel TISSOT
> Sent: Monday, March 21, 2016 8:55 PM
> To: Gottloeb, Jeff (ES & CSO) <jeffrey.gottl...@ngc.com>; 
> linux-poweredge-Lists <linux-powere...@lists.us.dell.com>
> Subject: Re: [Linux-PowerEdge] EXT : R720 DSU and iDRAC version
>
> No, I change settings to have usb-storage module loaded at boot time and I 
> get the same result.
> On the console, I have these messages about sdab (the virtual device)
>
> [cid:image001.png@01D1841D.D832C920]
> Le 21/03/2016 15:18, Gottloeb, Jeff (ES & CSO) a écrit :
> Do you have the usb-storage kernel module disabled or uninstalled?  DSU (and 
> OMSA) up to v8.3 require this kernel module.  Found this out after a couple 
> of weeks of troubleshooting with Dell.
>
> Sent from my Windows Phone
> 
> From: Jean-Daniel TISSOT<mailto:jean-daniel.tis...@univ-fcomte.fr>
> Sent: ‎3/‎21/‎2016 5:44 AM
> To: linux-poweredge@dell.com<mailto:linux-poweredge@dell.com>
> Subject: EXT :[Linux-PowerEdge] R720 DSU and iDRAC version
>
> Hi,
>
> This server is running CentOS release 6.7
>
> dsu --apply-upgrades-only show me a new version (2.30.30.30) for iDRAC with 
> Lifecycle Controller (2.21.21.21 installed).
> Booting on Lyfecycle and searching for new firmwares don't find anything to 
> upgrade.
> Searching on Dell Support web site for my Service Tag found only 2.21.21.21 
> version of iDrac.
>
> Runining dsu -u give me :
>
> |---Dell System Updates---|
> [ ] represents 'not selected'
> [*] represents 'selected'
> [-] represents 'Component already at repository version (can be selected only 
> if -e option is used)'
> Choose:  q - Quit without update, c to Commit,  - To Select/Deselect, 
> a - Select All, n - Select None
>
> [*]1  iDRAC
>  Current Version : 2.21.21.21 Upgrade to : 2.30.30.30
>
> Enter your choice : c
> Installing iDRAC-with-Lifecycle-Controller_Firmware_JHF76_LN_2.30.30.30_A00...
> Collecting inventory...
> .
> Running validation...
>
> iDRAC
>
> The version of this Update Package is newer than the currently installed 
> version.
> Software application name: iDRAC
> Package version: 2.30.30.30
> Installed version: 2.21.21.21
>
>
> Executing update...
> WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER DELL PRODUCTS WHILE UPDATE 
> IS IN PROGRESS.
> THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!
> .   
> USB Device is not found
> ...   USB 
> Device is not found
> ..   USB 
> Device is not found
> .
> Device: iDRAC
>   Application: iDRAC
>   Failed to access Virtual USB Device
>
> iDRAC-with-Lifecycle-Controller_Firmware_JHF76_LN_2.30.30.30_A00 could not be 
> installed
>
>
> Why the virtual device disconnect several time ? How to correct this problem ?
>
> Many thanks in advance.
>
> Cheers.
>
> --
> Bien cordialement, Jean-Daniel 
> TISSOT<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
> Administrateur Systèmes et Réseaux
> Tel: +33 3 81 666 440 Fax: +33 3 81 666 568
>
> Laboratoire Chrono-environnement<http://chrono-environnement.univ-fcomte.fr/>
> 16, Route de Gray
> 25030 BESANÇON Cédex
>
> Plan et 
> Accès<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
>
> --
> Bien cordialement, Jean-Daniel 
> TISSOT<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
> Administrateur Systèmes et Réseaux
> Tel: +33 3 81 666 440 Fax: +33 3 81 666 568
>
> Laboratoire Chrono-environnement<http://chrono-environnement.univ-fcomte.fr/>
> 16, Route de Gray
> 25030 BESANÇON Cédex
>
> Plan et 
> Accès<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] EXT : R720 DSU and iDRAC version

2016-03-21 Thread Jean-Daniel TISSOT 
No, I change settings to have usb-storage module loaded at boot time and I get 
the same result.
On the console, I have these messages about sdab (the virtual device)



Le 21/03/2016 15:18, Gottloeb, Jeff (ES & CSO) a écrit :
> Do you have the usb-storage kernel module disabled or uninstalled?  DSU (and 
> OMSA) up to v8.3 require this kernel module.  Found this out after a couple 
> of weeks of troubleshooting with Dell.
>
> Sent from my Windows Phone
> --------
> From: Jean-Daniel TISSOT <mailto:jean-daniel.tis...@univ-fcomte.fr>
> Sent: ‎3/‎21/‎2016 5:44 AM
> To: linux-poweredge@dell.com <mailto:linux-poweredge@dell.com>
> Subject: EXT :[Linux-PowerEdge] R720 DSU and iDRAC version
>
>
> Hi,
>
> This server is running CentOS release 6.7
>
> dsu --apply-upgrades-only show me a new version (2.30.30.30) for iDRAC with 
> Lifecycle Controller (2.21.21.21 installed).
> Booting on Lyfecycle and searching for new firmwares don't find anything to 
> upgrade.
> Searching on Dell Support web site for my Service Tag found only 2.21.21.21 
> version of iDrac.
>
> Runining dsu -u give me :
>
> |---Dell System Updates---|
> [ ] represents 'not selected'
> [*] represents 'selected'
> [-] represents 'Component already at repository version (can be selected only 
> if -e option is used)'
> Choose:  q - Quit without update, c to Commit,  - To Select/Deselect, 
> a - Select All, n - Select None
>
> [*]1  iDRAC
>  Current Version : 2.21.21.21 Upgrade to : 2.30.30.30
>
> Enter your choice : c
> Installing iDRAC-with-Lifecycle-Controller_Firmware_JHF76_LN_2.30.30.30_A00...
> Collecting inventory...
> .
> Running validation...
>
> iDRAC
>
> The version of this Update Package is newer than the currently installed 
> version.
> Software application name: iDRAC
> Package version: 2.30.30.30
> Installed version: 2.21.21.21
>
>
> Executing update...
> WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER DELL PRODUCTS WHILE UPDATE 
> IS IN PROGRESS.
> THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!
> .   
> USB Device is not found
> ...   USB 
> Device is not found
> ..   USB 
> Device is not found
> .
> Device: iDRAC
>   Application: iDRAC
>   Failed to access Virtual USB Device
>
> iDRAC-with-Lifecycle-Controller_Firmware_JHF76_LN_2.30.30.30_A00 could not be 
> installed
>
>
> Why the virtual device disconnect several time ? How to correct this problem ?
>
> Many thanks in advance.
>
> Cheers.
>
>
> -- 
> Bien cordialement, Jean-Daniel TISSOT 
> <http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
> Administrateur Systèmes et Réseaux
> Tel: +33 3 81 666 440 Fax: +33 3 81 666 568
>
> Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
> 16, Route de Gray
> 25030 BESANÇON Cédex
>
> Plan et Accès 
> <https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

[Linux-PowerEdge] R720 DSU and iDRAC version

2016-03-21 Thread Jean-Daniel TISSOT 

Hi,

This server is running CentOS release 6.7

dsu --apply-upgrades-only show me a new version (2.30.30.30) for iDRAC with 
Lifecycle Controller (2.21.21.21 installed).
Booting on Lyfecycle and searching for new firmwares don't find anything to 
upgrade.
Searching on Dell Support web site for my Service Tag found only 2.21.21.21 
version of iDrac.

Runining dsu -u give me :

|---Dell System Updates---|
[ ] represents 'not selected'
[*] represents 'selected'
[-] represents 'Component already at repository version (can be selected only 
if -e option is used)'
Choose:  q - Quit without update, c to Commit,  - To Select/Deselect, a 
- Select All, n - Select None

[*]1  iDRAC
 Current Version : 2.21.21.21 Upgrade to : 2.30.30.30

Enter your choice : c
Installing iDRAC-with-Lifecycle-Controller_Firmware_JHF76_LN_2.30.30.30_A00...
Collecting inventory...
.
Running validation...

iDRAC

The version of this Update Package is newer than the currently installed 
version.
Software application name: iDRAC
Package version: 2.30.30.30
Installed version: 2.21.21.21


Executing update...
WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER DELL PRODUCTS WHILE UPDATE 
IS IN PROGRESS.
THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!
.   USB 
Device is not found
...   USB 
Device is not found
..   USB Device 
is not found
.
Device: iDRAC
  Application: iDRAC
  Failed to access Virtual USB Device

iDRAC-with-Lifecycle-Controller_Firmware_JHF76_LN_2.30.30.30_A00 could not be 
installed


Why the virtual device disconnect several time ? How to correct this problem ?

Many thanks in advance.

Cheers.


-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Debian Jessie on R730

2016-01-22 Thread Jean-Daniel TISSOT 


Le 22. 01. 16 11:19, Tadeu Ferreira Oliveira a écrit :
> Thank you, is the firmware-bnx2x_0.43_all.deb enough? 
> Is there any installation process besides that package installation?

During install with add the bnx2 firmware, include non-free softwares to get 
non-free firmware like new bnx version
>
>
> On Fri, Jan 22, 2016 at 3:01 AM, Jean-Daniel TISSOT 
> <jean-daniel.tis...@univ-fcomte.fr 
> <mailto:jean-daniel.tis...@univ-fcomte.fr>> wrote:
>
> We have installed Jessie on R410, 420 or R710 but we have to furnish the 
> good driver on USB Key to get network.
> You can find on 
> https://github.com/cernekee/linux-firmware/blob/master/bnx2/bnx2-mips-06-6.2.3.fw
>  or https://packages.debian.org/jessie/all/firmware-bnx2x/download and 
> extract the *.fw file
>
> Le 21. 01. 16 23:58, Tadeu Ferreira Oliveira a écrit :
>> Does anyone have used Proxmox 4.1 or Debian 8 Jessie on Poweredge R730?
>>
>> I installed it but the NIC does not seems to be working properly, I 
>> believe it has to do with the bn2x driver, since I can not get any net I can 
>> not download anything on that server. How can I install the right drivers?
>>
>
> -- 
> Bien cordialement, Jean-Daniel TISSOT 
> <http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
> Administrateur Systèmes et Réseaux
> Tel: +33 3 81 666 440 Fax: +33 3 81 666 568
>
> Laboratoire Chrono-environnement 
> <http://chrono-environnement.univ-fcomte.fr/>
> 16, Route de Gray
> 25030 BESANÇON Cédex
>
> Plan et Accès 
> <https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
>
>
>
>
> -- 
> ----
> Tadeu Ferreira Oliveira
> Professor IFRN-Parnamirim
> 

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Debian Jessie on R730

2016-01-21 Thread Jean-Daniel TISSOT 
We have installed Jessie on R410, 420 or R710 but we have to furnish the good 
driver on USB Key to get network.
You can find on 
https://github.com/cernekee/linux-firmware/blob/master/bnx2/bnx2-mips-06-6.2.3.fw
 or https://packages.debian.org/jessie/all/firmware-bnx2x/download and extract 
the *.fw file

Le 21. 01. 16 23:58, Tadeu Ferreira Oliveira a écrit :
> Does anyone have used Proxmox 4.1 or Debian 8 Jessie on Poweredge R730?
>
> I installed it but the NIC does not seems to be working properly, I believe 
> it has to do with the bn2x driver, since I can not get any net I can not 
> download anything on that server. How can I install the right drivers?
>

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge

Re: [Linux-PowerEdge] Debian Jessie repo

2015-12-14 Thread Jean-Daniel TISSOT 
Hi,

Many Thanks.

Does srvadmin-all must be uninstalled before running Docker file ?
I'm a newbie in Docker.

Le 14. 12. 15 18:39, josh_mo...@dell.com a écrit :
>
> *Dell - Internal Use - Confidential *
>
> I did not see whether anyone has provided an answer to this, I cannot answer 
> it myself.
>
> However, if that repo is no longer being updated this other project may 
> interest you.
>
>  
>
> http://en.community.dell.com/techcenter/b/techcenter/archive/2015/08/10/running-openmanage-server-administrator-in-a-docker-container
>  
>
>  
>
>  
>
> *Josh Moore*
>
> Enterprise Master Engineer
>
> RHCE, RHCSA-RHOS(120-095-146 
> <https://www.redhat.com/wapps/training/certification/verify.html;jsessionid=zuu-TS5+X5t7hqSpWRrrJsRI.b2a6cea7?certNumber=120-095-146=False=Verify>)
>  | LPIC-3 Core + Security
>
> *Dell*| Support Services**
>
>  
>
>  
>
> *From:*linux-poweredge-bounces-Lists *On Behalf Of *ch urnd
> *Sent:* Friday, December 11, 2015 9:47 AM
> *To:* linux-poweredge-Lists <linux-powere...@lists.us.dell.com>
> *Subject:* [Linux-PowerEdge] Debian Jessie repo
>
>  
>
> I tried installing the debian jessie repo as outlined here:  
> http://linux.dell.com/repo/community/ubuntu/
>
> However, apt-get update then apt-cache search srvadmin returns nothing.  Are 
> those repos still working?
>
>
>
> _______
> Linux-PowerEdge mailing list
> Linux-PowerEdge@dell.com
> https://lists.us.dell.com/mailman/listinfo/linux-poweredge

-- 
Bien cordialement, Jean-Daniel TISSOT 
<http://chrono-environnement.univ-fcomte.fr/spip.php?article457>
Administrateur Systèmes et Réseaux
Tel: +33 3 81 666 440 Fax: +33 3 81 666 568

Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/>
16, Route de Gray
25030 BESANÇON Cédex

Plan et Accès 
<https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c>


smime.p7s
Description: Signature cryptographique S/MIME
___
Linux-PowerEdge mailing list
Linux-PowerEdge@dell.com
https://lists.us.dell.com/mailman/listinfo/linux-poweredge