Re: LyX not rendering graphics
John == John Levon [EMAIL PROTECTED] writes: John On Tue, Nov 19, 2002 at 10:26:46AM +0100, Jean-Marc Lasgouttes John wrote: This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. John and for 1.3 ? does this fix the problem on bugzilla regarding John non-tempdir and export ? Huh? Which problem? The is a bug that I kknow of about html export outputtinh files in tmp dir. Is that what you are alluding too? I have to admit I did not have time to look seriously at this question. It used to work in 1.2.0, it seems, but I am not sure why. JMarc
Re: LyX not rendering graphics
On Wed, Nov 20, 2002 at 11:55:23AM +0100, Jean-Marc Lasgouttes wrote: Huh? Which problem? The is a bug that I kknow of about html export http://bugzilla.lyx.org/show_bug.cgi?id=655 regards john -- Khendon's Law: If the same point is made twice by the same person, the thread is over.
Re: LyX not rendering graphics
PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. perl is overkill here. man rename its a short one liner to rename the files. another seddy line to fix the lyx files including. probably 2 lines does count as a lyx error :( john
Re: LyX not rendering graphics
On Wed, Nov 20, 2002 at 10:43:31PM +1100, John Sheahan wrote: PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. perl is overkill here. That's why the 'e.g.' Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
John == John Levon [EMAIL PROTECTED] writes: John On Tue, Nov 19, 2002 at 10:26:46AM +0100, Jean-Marc Lasgouttes John wrote: This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. John and for 1.3 ? does this fix the problem on bugzilla regarding John non-tempdir and export ? Huh? Which problem? The is a bug that I kknow of about html export outputtinh files in tmp dir. Is that what you are alluding too? I have to admit I did not have time to look seriously at this question. It used to work in 1.2.0, it seems, but I am not sure why. JMarc
Re: LyX not rendering graphics
On Wed, Nov 20, 2002 at 11:55:23AM +0100, Jean-Marc Lasgouttes wrote: Huh? Which problem? The is a bug that I kknow of about html export http://bugzilla.lyx.org/show_bug.cgi?id=655 regards john -- Khendon's Law: If the same point is made twice by the same person, the thread is over.
Re: LyX not rendering graphics
PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. perl is overkill here. man rename its a short one liner to rename the files. another seddy line to fix the lyx files including. probably 2 lines does count as a lyx error :( john
Re: LyX not rendering graphics
On Wed, Nov 20, 2002 at 10:43:31PM +1100, John Sheahan wrote: PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. perl is overkill here. That's why the 'e.g.' Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
> "John" == John Levon <[EMAIL PROTECTED]> writes: John> On Tue, Nov 19, 2002 at 10:26:46AM +0100, Jean-Marc Lasgouttes John> wrote: >> This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. John> and for 1.3 ? does this fix the problem on bugzilla regarding John> non-tempdir and export ? Huh? Which problem? The is a bug that I kknow of about html export outputtinh files in tmp dir. Is that what you are alluding too? I have to admit I did not have time to look seriously at this question. It used to work in 1.2.0, it seems, but I am not sure why. JMarc
Re: LyX not rendering graphics
On Wed, Nov 20, 2002 at 11:55:23AM +0100, Jean-Marc Lasgouttes wrote: > Huh? Which problem? The is a bug that I kknow of about html export http://bugzilla.lyx.org/show_bug.cgi?id=655 regards john -- Khendon's Law: If the same point is made twice by the same person, the thread is over.
Re: LyX not rendering graphics
> > PS: Renaming is probably a one-liner in e.g. perl. If you tell me what > exactly you want to have changed I might even tell you what it could look > like. perl is overkill here. man rename its a short one liner to rename the files. another seddy line to fix the lyx files including. probably 2 lines does count as a lyx error :( john
Re: LyX not rendering graphics
On Wed, Nov 20, 2002 at 10:43:31PM +1100, John Sheahan wrote: > > PS: Renaming is probably a one-liner in e.g. perl. If you tell me what > > exactly you want to have changed I might even tell you what it could look > > like. > > perl is overkill here. That's why the 'e.g.' Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard Removing the extra periods allows the graphic to render. Good to know. Richard I hope this will be fixed eventually because it will be very Richard inconvenient not to be able to use periods to make the file Richard names more readable. With hundreds of files, it is difficult Richard to keep track of them with dos-like names. This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. JMarc
Re: LyX not rendering graphics
Am Montag, 18. November 2002 15:39 schrieb Andre Poenitz: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure ImageMagick is installed. And as I reported in my second mail yesterday the problem was solved after renaming my old ~/.lyx directory, then forcing LyX to generate a new .lyx directory and finally by generating a new lyxrc with the preferences that I am used to from the new lyxrc.example template. If the reason for the stuck graphics and blocked keyboard was not simply the need to generate a new personal environment, there might be another reason: I had keys bound to LyX-functions that have been renamed in the meantime: figure-insert -- graphics-insert buffer-float-insert table -- float-insert table buffer-float-insert figure -- float-insert figure Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
Re: LyX not rendering graphics
Thomas Templin wrote: On Monday 18 November 2002 21:50, Richard A. Bilonick wrote: Removing the extra periods allows the graphic to render. I hope this will be fixed eventually because it will be very inconvenient not to be able to use periods to make the file names more readable. With hundreds of files, it is difficult to keep track of them with dos-like names. Why not use underscores? Works fine here :) bye, Thomas I have 200 graphics files. Even if I somehow renamed all of them, I would have to go back through 20 documents and change all the graphic file names. Periods are legal characters in file names. The next time possibly underscores won't work. Am I supposed to rename all my files for every new version of LyX? Rick B.
Re: LyX not rendering graphics
Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard I have 200 graphics files. Even if I somehow renamed all of Richard them, I would have to go back through 20 documents and change Richard all the graphic file names. Periods are legal characters in Richard file names. The next time possibly underscores won't work. Am Richard I supposed to rename all my files for every new version of Richard LyX? No, we're supposing to fix it. It is just that I am a bit slow at getting releases out. JMarc
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 09:31:38AM -0500, Richard A. Bilonick wrote: I have 200 graphics files. Even if I somehow renamed all of them, I would have to go back through 20 documents and change all the graphic file names. Periods are legal characters in file names. The next time possibly underscores won't work. Am I supposed to rename all my files for every new version of LyX? May I check your support contract, please? Andre' PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Jean-Marc Lasgouttes wrote: Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard I have 200 graphics files. Even if I somehow renamed all of Richard them, I would have to go back through 20 documents and change Richard all the graphic file names. Periods are legal characters in Richard file names. The next time possibly underscores won't work. Am Richard I supposed to rename all my files for every new version of Richard LyX? No, we're supposing to fix it. It is just that I am a bit slow at getting releases out. JMarc Jean-Marc, I'm not complaining. It's not a big problem. I'm just glad we know what the problem is. My only point to the person suggesting changing the file names is that it's not realistic when there are lots of already created files and documents. Rick B.
Re: LyX not rendering graphics
Andre Poenitz wrote: On Tue, Nov 19, 2002 at 09:31:38AM -0500, Richard A. Bilonick wrote: I have 200 graphics files. Even if I somehow renamed all of them, I would have to go back through 20 documents and change all the graphic file names. Periods are legal characters in file names. The next time possibly underscores won't work. Am I supposed to rename all my files for every new version of LyX? May I check your support contract, please? Andre' PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. Nothing I said here was a complaint about LyX. My point was that renaming files becuase of a problem in LyX is not a reasonable solution. Especially when the problem itself is not a big deal. My main goal was to understand what was causing the problem. Now that I know the source of the problem (and that it's not something to do especially with R or RH 8.0, etc.), I can wait for a fix. If a fix never comes I'm in no position to complain. Rick B.
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 10:20:46AM -0500, Richard A. Bilonick wrote: I'm not complaining. Well, it sounded like that. It's not a big problem. I'm just glad we know what the problem is. My only point to the person suggesting changing the file names is that it's not realistic when there are lots of already created files and documents. Yes, the proper solution is to fix it. But then, the change is probably trivial and neither the number of files nor the number of occurances in a file makes the task significantly harder. Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 10:26:46AM +0100, Jean-Marc Lasgouttes wrote: This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. and for 1.3 ? does this fix the problem on bugzilla regarding non-tempdir and export ? regards john -- Khendon's Law: If the same point is made twice by the same person, the thread is over.
Re: LyX not rendering graphics
Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard Removing the extra periods allows the graphic to render. Good to know. Richard I hope this will be fixed eventually because it will be very Richard inconvenient not to be able to use periods to make the file Richard names more readable. With hundreds of files, it is difficult Richard to keep track of them with dos-like names. This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. JMarc
Re: LyX not rendering graphics
Am Montag, 18. November 2002 15:39 schrieb Andre Poenitz: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure ImageMagick is installed. And as I reported in my second mail yesterday the problem was solved after renaming my old ~/.lyx directory, then forcing LyX to generate a new .lyx directory and finally by generating a new lyxrc with the preferences that I am used to from the new lyxrc.example template. If the reason for the stuck graphics and blocked keyboard was not simply the need to generate a new personal environment, there might be another reason: I had keys bound to LyX-functions that have been renamed in the meantime: figure-insert -- graphics-insert buffer-float-insert table -- float-insert table buffer-float-insert figure -- float-insert figure Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
Re: LyX not rendering graphics
Thomas Templin wrote: On Monday 18 November 2002 21:50, Richard A. Bilonick wrote: Removing the extra periods allows the graphic to render. I hope this will be fixed eventually because it will be very inconvenient not to be able to use periods to make the file names more readable. With hundreds of files, it is difficult to keep track of them with dos-like names. Why not use underscores? Works fine here :) bye, Thomas I have 200 graphics files. Even if I somehow renamed all of them, I would have to go back through 20 documents and change all the graphic file names. Periods are legal characters in file names. The next time possibly underscores won't work. Am I supposed to rename all my files for every new version of LyX? Rick B.
Re: LyX not rendering graphics
Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard I have 200 graphics files. Even if I somehow renamed all of Richard them, I would have to go back through 20 documents and change Richard all the graphic file names. Periods are legal characters in Richard file names. The next time possibly underscores won't work. Am Richard I supposed to rename all my files for every new version of Richard LyX? No, we're supposing to fix it. It is just that I am a bit slow at getting releases out. JMarc
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 09:31:38AM -0500, Richard A. Bilonick wrote: I have 200 graphics files. Even if I somehow renamed all of them, I would have to go back through 20 documents and change all the graphic file names. Periods are legal characters in file names. The next time possibly underscores won't work. Am I supposed to rename all my files for every new version of LyX? May I check your support contract, please? Andre' PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Jean-Marc Lasgouttes wrote: Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard I have 200 graphics files. Even if I somehow renamed all of Richard them, I would have to go back through 20 documents and change Richard all the graphic file names. Periods are legal characters in Richard file names. The next time possibly underscores won't work. Am Richard I supposed to rename all my files for every new version of Richard LyX? No, we're supposing to fix it. It is just that I am a bit slow at getting releases out. JMarc Jean-Marc, I'm not complaining. It's not a big problem. I'm just glad we know what the problem is. My only point to the person suggesting changing the file names is that it's not realistic when there are lots of already created files and documents. Rick B.
Re: LyX not rendering graphics
Andre Poenitz wrote: On Tue, Nov 19, 2002 at 09:31:38AM -0500, Richard A. Bilonick wrote: I have 200 graphics files. Even if I somehow renamed all of them, I would have to go back through 20 documents and change all the graphic file names. Periods are legal characters in file names. The next time possibly underscores won't work. Am I supposed to rename all my files for every new version of LyX? May I check your support contract, please? Andre' PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. Nothing I said here was a complaint about LyX. My point was that renaming files becuase of a problem in LyX is not a reasonable solution. Especially when the problem itself is not a big deal. My main goal was to understand what was causing the problem. Now that I know the source of the problem (and that it's not something to do especially with R or RH 8.0, etc.), I can wait for a fix. If a fix never comes I'm in no position to complain. Rick B.
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 10:20:46AM -0500, Richard A. Bilonick wrote: I'm not complaining. Well, it sounded like that. It's not a big problem. I'm just glad we know what the problem is. My only point to the person suggesting changing the file names is that it's not realistic when there are lots of already created files and documents. Yes, the proper solution is to fix it. But then, the change is probably trivial and neither the number of files nor the number of occurances in a file makes the task significantly harder. Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 10:26:46AM +0100, Jean-Marc Lasgouttes wrote: This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. and for 1.3 ? does this fix the problem on bugzilla regarding non-tempdir and export ? regards john -- Khendon's Law: If the same point is made twice by the same person, the thread is over.
Re: LyX not rendering graphics
> "Richard" == Richard A Bilonick <[EMAIL PROTECTED]> writes: Richard> Removing the extra periods allows the graphic to render. Good to know. Richard> I hope this will be fixed eventually because it will be very Richard> inconvenient not to be able to use periods to make the file Richard> names more readable. With hundreds of files, it is difficult Richard> to keep track of them with dos-like names. This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. JMarc
Re: LyX not rendering graphics
Am Montag, 18. November 2002 15:39 schrieb Andre Poenitz: > On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: > > Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even > > see graphics sporadically any more. Instead I get an error message in > > each graphics box telling me that the conversion into a display format > > failed. In fact, the message is in German and reads "Fehler bei der > > Konvertierung in ein darstellbares Format" > > Try to install ImageMagick and run Edit->Reconfigure > ImageMagick is installed. And as I reported in my second mail yesterday the problem was solved after renaming my old ~/.lyx directory, then forcing LyX to generate a new .lyx directory and finally by generating a new lyxrc with the preferences that I am used to from the new lyxrc.example template. If the reason for the stuck graphics and blocked keyboard was not simply the need to generate a new personal environment, there might be another reason: I had keys bound to LyX-functions that have been renamed in the meantime: figure-insert --> graphics-insert buffer-float-insert table --> float-insert table buffer-float-insert figure --> float-insert figure Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
Re: LyX not rendering graphics
Thomas Templin wrote: On Monday 18 November 2002 21:50, Richard A. Bilonick wrote: Removing the extra periods allows the graphic to render. I hope this will be fixed eventually because it will be very inconvenient not to be able to use periods to make the file names more readable. With hundreds of files, it is difficult to keep track of them with dos-like names. Why not use underscores? Works fine here :) bye, Thomas I have 200 graphics files. Even if I somehow renamed all of them, I would have to go back through 20 documents and change all the graphic file names. Periods are legal characters in file names. The next time possibly underscores won't work. Am I supposed to rename all my files for every new version of LyX? Rick B.
Re: LyX not rendering graphics
> "Richard" == Richard A Bilonick <[EMAIL PROTECTED]> writes: Richard> I have 200 graphics files. Even if I somehow renamed all of Richard> them, I would have to go back through 20 documents and change Richard> all the graphic file names. Periods are legal characters in Richard> file names. The next time possibly underscores won't work. Am Richard> I supposed to rename all my files for every new version of Richard> LyX? No, we're supposing to fix it. It is just that I am a bit slow at getting releases out. JMarc
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 09:31:38AM -0500, Richard A. Bilonick wrote: > I have 200 graphics files. Even if I somehow renamed all of them, I > would have to go back through 20 documents and change all the graphic > file names. Periods are legal characters in file names. The next time > possibly underscores won't work. Am I supposed to rename all my files > for every new version of LyX? May I check your support contract, please? Andre' PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Jean-Marc Lasgouttes wrote: "Richard" == Richard A Bilonick <[EMAIL PROTECTED]> writes: Richard> I have 200 graphics files. Even if I somehow renamed all of Richard> them, I would have to go back through 20 documents and change Richard> all the graphic file names. Periods are legal characters in Richard> file names. The next time possibly underscores won't work. Am Richard> I supposed to rename all my files for every new version of Richard> LyX? No, we're supposing to fix it. It is just that I am a bit slow at getting releases out. JMarc Jean-Marc, I'm not complaining. It's not a big problem. I'm just glad we know what the problem is. My only point to the person suggesting changing the file names is that it's not realistic when there are lots of already created files and documents. Rick B.
Re: LyX not rendering graphics
Andre Poenitz wrote: On Tue, Nov 19, 2002 at 09:31:38AM -0500, Richard A. Bilonick wrote: I have 200 graphics files. Even if I somehow renamed all of them, I would have to go back through 20 documents and change all the graphic file names. Periods are legal characters in file names. The next time possibly underscores won't work. Am I supposed to rename all my files for every new version of LyX? May I check your support contract, please? Andre' PS: Renaming is probably a one-liner in e.g. perl. If you tell me what exactly you want to have changed I might even tell you what it could look like. Nothing I said here was a complaint about LyX. My point was that renaming files becuase of a problem in LyX is not a reasonable solution. Especially when the problem itself is not a big deal. My main goal was to understand what was causing the problem. Now that I know the source of the problem (and that it's not something to do especially with R or RH 8.0, etc.), I can wait for a fix. If a fix never comes I'm in no position to complain. Rick B.
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 10:20:46AM -0500, Richard A. Bilonick wrote: > I'm not complaining. Well, it sounded like that. > It's not a big problem. I'm just glad we know what the problem is. My > only point to the person suggesting changing the file names is that it's > not realistic when there are lots of already created files and documents. Yes, the proper solution is to fix it. But then, the change is probably trivial and neither the number of files nor the number of occurances in a file makes the task significantly harder. Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
On Tue, Nov 19, 2002 at 10:26:46AM +0100, Jean-Marc Lasgouttes wrote: > This is fixed in 1.2.2cvs, so this bug will be gone in 1.2.2. and for 1.3 ? does this fix the problem on bugzilla regarding non-tempdir and export ? regards john -- Khendon's Law: If the same point is made twice by the same person, the thread is over.
LyX not rendering graphics
Since more than a year I have watched the list and the discussion concerning the problem that LyX renders graphics only sporadically on fast computers - I still have the problem and tried the sporadic tips to solve the problem - without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 to 1.2.1, but was unable to compile the sources - because of the cc1plus error. Now I have succeeded in part and feel that there might be somebody out there knowing the ultimate solution. Here is what I did: When I asked to check the dependencies, the output was: # rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm error: failed dependencies: tetex-xdvi is needed by lyx-1.2.1-1 tetex-latex is needed by lyx-1.2.1-1 libstdc++.so.5 is needed by lyx-1.2.1-1 libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 perl(Cwd) is needed by lyx-1.2.1-1 perl(File::Basename) is needed by lyx-1.2.1-1 perl(FileHandle) is needed by lyx-1.2.1-1 perl(lib) is needed by lyx-1.2.1-1 perl(strict) is needed by lyx-1.2.1-1 perl(vars) is needed by lyx-1.2.1-1 So I installed 1.2.1 from the binary rpm using --nodeps and supplied both libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link to libstdc++.so.5 was generated and ldconfig was run). Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
LyX not rendering graphics
I sent a request for help some minutes ago --- the problem is solved! I had to disable my ~/.lyx directory, and now it works and I see all the graphics displayed. My beloved keybinding files blocked both the rendering of graphics and the possibility to input keystrokes from the keyboard. Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
Re: LyX not rendering graphics
On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Norbert Stribeck wrote: Since more than a year I have watched the list and the discussion concerning the problem that LyX renders graphics only sporadically on fast computers - I still have the problem and tried the sporadic tips to solve the problem - without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 to 1.2.1, but was unable to compile the sources - because of the cc1plus error. Now I have succeeded in part and feel that there might be somebody out there knowing the ultimate solution. Here is what I did: When I asked to check the dependencies, the output was: # rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm error: failed dependencies: tetex-xdvi is needed by lyx-1.2.1-1 tetex-latex is needed by lyx-1.2.1-1 libstdc++.so.5 is needed by lyx-1.2.1-1 libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 perl(Cwd) is needed by lyx-1.2.1-1 perl(File::Basename) is needed by lyx-1.2.1-1 perl(FileHandle) is needed by lyx-1.2.1-1 perl(lib) is needed by lyx-1.2.1-1 perl(strict) is needed by lyx-1.2.1-1 perl(vars) is needed by lyx-1.2.1-1 So I installed 1.2.1 from the binary rpm using --nodeps and supplied both libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link to libstdc++.so.5 was generated and ldconfig was run). Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Norbert I'm in a similar (sinking) boat. In previous versions of LyX, the graphics would almost always render. At most, I would just have to restart LyX and rendering would work again. Now that I've installed 1.2.1 for RH 8.0 and using xforms 0.89 (after upgrading to RH 8.0), rendering just does NOT work at all. (Not quite true - it doesn't work on eps files created by R.) This is on three Intel PCs all running RH 8.0 (one is a laptop, the other two are desktop systems). I can't be sure the problem doesn't have something to do with Redhat 8.0. Or it may be that all the eps files I'm creating come from R (they used to render OK and they are eps files.) But I cannot fix it and have seen NOTHING on the list that has helped. Someone did suggest turning on debuggind (lyx -dbg graphics or lyx -dbg any) but that just tells me the conversion doesn't work - even though all the software needed for the conversion is readily available on all three systems - I can do it manually - and if the conversion wasn't in the preferences I added it. LyX installed differently on each system. On at least one I had to even get it to just view in PS and PDF. Viewing in HTML gives a screwy message about the file name having more than one period and that dvips can't handle it. I have to rename the file so there is only one period. Fortunately I guess I can live without rendering in LyX just so long as it prints and views OK. Just for your information, I always use rpm -U --test before actually installing the binary. rpm never reported any problem either in test mode or when I actually installed the software. There were no conflicts and it didn't complain about any missing software - LyX installed (as it had in the past) without any error messages or warnings. Everything seems to work except for rendering (and viewing on one system) out of the box. At least for me, the rendering error message is in English. I miss the days when I could just install a new version of LyX and continue doing actual work. If anyone can explain how to fix this I would certainly appreciate it. Rick B.
Re: LyX not rendering graphics
Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' ImageMagick 5.4.7 is installed and reconfiguring does not help. Nor does disabling the .lyx file. Rick B.
Re: LyX not rendering graphics
I had a similar problem, but I was under RH 7.0: graphics would *never* show up under Lyx 1.2.1. This weekend I got pissed about it and after a while I came to the idea of reinstalling ImageMagick, uploading from 5.3.3. to 5.5.*. It worked... seems that convert was failing before. In any case there is room for improvement in the way images are handled now, because the text jumps to the beginning when a new image is rendered, and the conversion process takes a long time in a document with several of them. Maybe the procedures should be reviewed somehow.. jb Since more than a year I have watched the list and the discussion concerning the problem that LyX renders graphics only sporadically on fast computers - I still have the problem and tried the sporadic tips to solve the problem - without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 to 1.2.1, but was unable to compile the sources - because of the cc1plus error. Now I have succeeded in part and feel that there might be somebody ou t there knowing the ultimate solution. Here is what I did: When I asked to check the dependencies, the output was: # rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm error: failed dependencies: tetex-xdvi is needed by lyx-1.2.1-1 tetex-latex is needed by lyx-1.2.1-1 libstdc++.so.5 is needed by lyx-1.2.1-1 libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 perl(Cwd) is needed by lyx-1.2.1-1 perl(File::Basename) is needed by lyx-1.2.1-1 perl(FileHandle) is needed by lyx-1.2.1-1 perl(lib) is needed by lyx-1.2.1-1 perl(strict) is needed by lyx-1.2.1-1 perl(vars) is needed by lyx-1.2.1-1 So I installed 1.2.1 from the binary rpm using --nodeps and supplied both libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link to libstdc++.so.5 was generated and ldconfig was run). Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ei n darstellbares Format Norbert I'm in a similar (sinking) boat. In previous versions of LyX, the graphics would almost always render. At most, I would just have to restart LyX and rendering would work again. Now that I've installed 1.2.1 for RH 8.0 and using xforms 0.89 (after upgrading to RH 8.0), rendering just does NOT work at all. (Not quite true - it doesn't work on eps files created by R.) This is on three Intel PCs all running RH 8.0 (one is a laptop, the other two are desktop systems). I can't be sure the problem doesn't have something to do with Redhat 8.0. Or it may be that all the eps files I'm creating come from R (they used to render OK and they are eps files.) But I cannot fix it and have seen NOTHING on the list that has helped. Someone did suggest turning on debuggind (lyx -dbg graphics or lyx -dbg any) but that just tells me the conversion doesn't work - even though all the software needed for the conversion is readily available on all three systems - I can do it manually - and if the conversion wasn't in the preferences I added it. LyX installed differently on each system. On at least one I had to even get it to just view in PS and PDF. Viewing in HTML gives a screwy message about the file name having more than one period and that dvips can't handle it. I have to rename the file so there is only one period. Fortunately I guess I can live without rendering in LyX just so long as it prints and views OK. Just for your information, I always use rpm -U --test before actually installing the binary. rpm never reported any problem either in test mode or when I actually installed the software. There were no conflicts and it didn't complain about any missing software - LyX installed (as it had in the past) without any error messages or warnings. Everything seems to work except for rendering (and viewing on one system) out of the box. At least for me, the rendering error message is in English. I miss the days when I could just install a new version of LyX and continue doing actual work. If anyone can explain how to fix this I would certainly appreciate it. Rick B.
Re: LyX not rendering graphics
Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' To what format does the eps file have to be converted so that it will display in LyX? I am able to display the eps file that Myriam Abramson (help with graphics, 11/17/02 04:39 pm) uploaded. But lyx cannot seem to handle eps files from R. I am attaching one example for people to try. I would like to know if LyX can render this eps - my LyX 1.2.1 doesn't. Rick B. pm2.5.time.plot.eps Description: PostScript document
Re: LyX not rendering graphics
On Mon, Nov 18, 2002 at 10:10:13AM -0500, Richard A. Bilonick wrote: To what format does the eps file have to be converted so that it will display in LyX? I believe .xpm Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Richard A. Bilonick wrote: To what format does the eps file have to be converted so that it will display in LyX? I am able to display the eps file that Myriam Abramson (help with graphics, 11/17/02 04:39 pm) uploaded. But lyx cannot seem to handle eps files from R. I am attaching one example for people to try. I would like to know if LyX can render this eps - my LyX 1.2.1 doesn't. Rick B. LyX has problems to convert files with more than one point in their names. Rename your file to pm25timeplot.eps and it will show up. This seems to be a LyX-bug similar to that with underscores in math formular names. Ronald
Re: LyX not rendering graphics
Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' Richard To what format does the eps file have to be converted so that Richard it will display in LyX? I am able to display the eps file Richard that Myriam Abramson (help with graphics, 11/17/02 04:39 Richard pm) uploaded. But lyx cannot seem to handle eps files from R. Richard I am attaching one example for people to try. I would like to Richard know if LyX can render this eps - my LyX 1.2.1 doesn't. It works fine for me with 1.2.2cvs, in two different environments: - redhat 7.1, xforms 0.89.5, ImageMagick 5.2.7, ghostscript 7.0 - tru64 4.0f, xforms 0.88.1, ImageMagick 3.7.8, ghostscript 7.0 Do you still have this problem if the file name does not contain multiple dots? JMarc
Re: LyX not rendering graphics
On Mon, 18 Nov 2002, Ronald Pagel wrote: Richard A. Bilonick wrote: To what format does the eps file have to be converted so that it will display in LyX? I am able to display the eps file that Myriam Abramson (help with graphics, 11/17/02 04:39 pm) uploaded. But lyx cannot seem to handle eps files from R. I am attaching one example for people to try. I would like to know if LyX can render this eps - my LyX 1.2.1 doesn't. Rick B. LyX has problems to convert files with more than one point in their names. Rename your file to pm25timeplot.eps and it will show up. This seems to be a LyX-bug similar to that with underscores in math formular names. Ronald I tried Ronalds tip and then LyX rendered the plot properly, before that it didn't. Has anybody filed a bug report on this? /Christian -- Christian Ridderström, +46-8-790 91 37 http://www.md.kth.se/~chr Mechatronics lab, Dept. of Machine Designhttp://www.md.kth.se
Re: LyX not rendering graphics
Jean-Marc Lasgouttes wrote: Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' Richard To what format does the eps file have to be converted so that Richard it will display in LyX? I am able to display the eps file Richard that Myriam Abramson (help with graphics, 11/17/02 04:39 Richard pm) uploaded. But lyx cannot seem to handle eps files from R. Richard I am attaching one example for people to try. I would like to Richard know if LyX can render this eps - my LyX 1.2.1 doesn't. It works fine for me with 1.2.2cvs, in two different environments: - redhat 7.1, xforms 0.89.5, ImageMagick 5.2.7, ghostscript 7.0 - tru64 4.0f, xforms 0.88.1, ImageMagick 3.7.8, ghostscript 7.0 Do you still have this problem if the file name does not contain multiple dots? JMarc Removing the extra periods allows the graphic to render. I hope this will be fixed eventually because it will be very inconvenient not to be able to use periods to make the file names more readable. With hundreds of files, it is difficult to keep track of them with dos-like names. Thanks. Rick B.
LyX not rendering graphics
Since more than a year I have watched the list and the discussion concerning the problem that LyX renders graphics only sporadically on fast computers - I still have the problem and tried the sporadic tips to solve the problem - without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 to 1.2.1, but was unable to compile the sources - because of the cc1plus error. Now I have succeeded in part and feel that there might be somebody out there knowing the ultimate solution. Here is what I did: When I asked to check the dependencies, the output was: # rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm error: failed dependencies: tetex-xdvi is needed by lyx-1.2.1-1 tetex-latex is needed by lyx-1.2.1-1 libstdc++.so.5 is needed by lyx-1.2.1-1 libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 perl(Cwd) is needed by lyx-1.2.1-1 perl(File::Basename) is needed by lyx-1.2.1-1 perl(FileHandle) is needed by lyx-1.2.1-1 perl(lib) is needed by lyx-1.2.1-1 perl(strict) is needed by lyx-1.2.1-1 perl(vars) is needed by lyx-1.2.1-1 So I installed 1.2.1 from the binary rpm using --nodeps and supplied both libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link to libstdc++.so.5 was generated and ldconfig was run). Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
LyX not rendering graphics
I sent a request for help some minutes ago --- the problem is solved! I had to disable my ~/.lyx directory, and now it works and I see all the graphics displayed. My beloved keybinding files blocked both the rendering of graphics and the possibility to input keystrokes from the keyboard. Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
Re: LyX not rendering graphics
On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Norbert Stribeck wrote: Since more than a year I have watched the list and the discussion concerning the problem that LyX renders graphics only sporadically on fast computers - I still have the problem and tried the sporadic tips to solve the problem - without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 to 1.2.1, but was unable to compile the sources - because of the cc1plus error. Now I have succeeded in part and feel that there might be somebody out there knowing the ultimate solution. Here is what I did: When I asked to check the dependencies, the output was: # rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm error: failed dependencies: tetex-xdvi is needed by lyx-1.2.1-1 tetex-latex is needed by lyx-1.2.1-1 libstdc++.so.5 is needed by lyx-1.2.1-1 libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 perl(Cwd) is needed by lyx-1.2.1-1 perl(File::Basename) is needed by lyx-1.2.1-1 perl(FileHandle) is needed by lyx-1.2.1-1 perl(lib) is needed by lyx-1.2.1-1 perl(strict) is needed by lyx-1.2.1-1 perl(vars) is needed by lyx-1.2.1-1 So I installed 1.2.1 from the binary rpm using --nodeps and supplied both libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link to libstdc++.so.5 was generated and ldconfig was run). Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Norbert I'm in a similar (sinking) boat. In previous versions of LyX, the graphics would almost always render. At most, I would just have to restart LyX and rendering would work again. Now that I've installed 1.2.1 for RH 8.0 and using xforms 0.89 (after upgrading to RH 8.0), rendering just does NOT work at all. (Not quite true - it doesn't work on eps files created by R.) This is on three Intel PCs all running RH 8.0 (one is a laptop, the other two are desktop systems). I can't be sure the problem doesn't have something to do with Redhat 8.0. Or it may be that all the eps files I'm creating come from R (they used to render OK and they are eps files.) But I cannot fix it and have seen NOTHING on the list that has helped. Someone did suggest turning on debuggind (lyx -dbg graphics or lyx -dbg any) but that just tells me the conversion doesn't work - even though all the software needed for the conversion is readily available on all three systems - I can do it manually - and if the conversion wasn't in the preferences I added it. LyX installed differently on each system. On at least one I had to even get it to just view in PS and PDF. Viewing in HTML gives a screwy message about the file name having more than one period and that dvips can't handle it. I have to rename the file so there is only one period. Fortunately I guess I can live without rendering in LyX just so long as it prints and views OK. Just for your information, I always use rpm -U --test before actually installing the binary. rpm never reported any problem either in test mode or when I actually installed the software. There were no conflicts and it didn't complain about any missing software - LyX installed (as it had in the past) without any error messages or warnings. Everything seems to work except for rendering (and viewing on one system) out of the box. At least for me, the rendering error message is in English. I miss the days when I could just install a new version of LyX and continue doing actual work. If anyone can explain how to fix this I would certainly appreciate it. Rick B.
Re: LyX not rendering graphics
Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' ImageMagick 5.4.7 is installed and reconfiguring does not help. Nor does disabling the .lyx file. Rick B.
Re: LyX not rendering graphics
I had a similar problem, but I was under RH 7.0: graphics would *never* show up under Lyx 1.2.1. This weekend I got pissed about it and after a while I came to the idea of reinstalling ImageMagick, uploading from 5.3.3. to 5.5.*. It worked... seems that convert was failing before. In any case there is room for improvement in the way images are handled now, because the text jumps to the beginning when a new image is rendered, and the conversion process takes a long time in a document with several of them. Maybe the procedures should be reviewed somehow.. jb Since more than a year I have watched the list and the discussion concerning the problem that LyX renders graphics only sporadically on fast computers - I still have the problem and tried the sporadic tips to solve the problem - without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 to 1.2.1, but was unable to compile the sources - because of the cc1plus error. Now I have succeeded in part and feel that there might be somebody ou t there knowing the ultimate solution. Here is what I did: When I asked to check the dependencies, the output was: # rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm error: failed dependencies: tetex-xdvi is needed by lyx-1.2.1-1 tetex-latex is needed by lyx-1.2.1-1 libstdc++.so.5 is needed by lyx-1.2.1-1 libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 perl(Cwd) is needed by lyx-1.2.1-1 perl(File::Basename) is needed by lyx-1.2.1-1 perl(FileHandle) is needed by lyx-1.2.1-1 perl(lib) is needed by lyx-1.2.1-1 perl(strict) is needed by lyx-1.2.1-1 perl(vars) is needed by lyx-1.2.1-1 So I installed 1.2.1 from the binary rpm using --nodeps and supplied both libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link to libstdc++.so.5 was generated and ldconfig was run). Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ei n darstellbares Format Norbert I'm in a similar (sinking) boat. In previous versions of LyX, the graphics would almost always render. At most, I would just have to restart LyX and rendering would work again. Now that I've installed 1.2.1 for RH 8.0 and using xforms 0.89 (after upgrading to RH 8.0), rendering just does NOT work at all. (Not quite true - it doesn't work on eps files created by R.) This is on three Intel PCs all running RH 8.0 (one is a laptop, the other two are desktop systems). I can't be sure the problem doesn't have something to do with Redhat 8.0. Or it may be that all the eps files I'm creating come from R (they used to render OK and they are eps files.) But I cannot fix it and have seen NOTHING on the list that has helped. Someone did suggest turning on debuggind (lyx -dbg graphics or lyx -dbg any) but that just tells me the conversion doesn't work - even though all the software needed for the conversion is readily available on all three systems - I can do it manually - and if the conversion wasn't in the preferences I added it. LyX installed differently on each system. On at least one I had to even get it to just view in PS and PDF. Viewing in HTML gives a screwy message about the file name having more than one period and that dvips can't handle it. I have to rename the file so there is only one period. Fortunately I guess I can live without rendering in LyX just so long as it prints and views OK. Just for your information, I always use rpm -U --test before actually installing the binary. rpm never reported any problem either in test mode or when I actually installed the software. There were no conflicts and it didn't complain about any missing software - LyX installed (as it had in the past) without any error messages or warnings. Everything seems to work except for rendering (and viewing on one system) out of the box. At least for me, the rendering error message is in English. I miss the days when I could just install a new version of LyX and continue doing actual work. If anyone can explain how to fix this I would certainly appreciate it. Rick B.
Re: LyX not rendering graphics
Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' To what format does the eps file have to be converted so that it will display in LyX? I am able to display the eps file that Myriam Abramson (help with graphics, 11/17/02 04:39 pm) uploaded. But lyx cannot seem to handle eps files from R. I am attaching one example for people to try. I would like to know if LyX can render this eps - my LyX 1.2.1 doesn't. Rick B. pm2.5.time.plot.eps Description: PostScript document
Re: LyX not rendering graphics
On Mon, Nov 18, 2002 at 10:10:13AM -0500, Richard A. Bilonick wrote: To what format does the eps file have to be converted so that it will display in LyX? I believe .xpm Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Richard A. Bilonick wrote: To what format does the eps file have to be converted so that it will display in LyX? I am able to display the eps file that Myriam Abramson (help with graphics, 11/17/02 04:39 pm) uploaded. But lyx cannot seem to handle eps files from R. I am attaching one example for people to try. I would like to know if LyX can render this eps - my LyX 1.2.1 doesn't. Rick B. LyX has problems to convert files with more than one point in their names. Rename your file to pm25timeplot.eps and it will show up. This seems to be a LyX-bug similar to that with underscores in math formular names. Ronald
Re: LyX not rendering graphics
Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' Richard To what format does the eps file have to be converted so that Richard it will display in LyX? I am able to display the eps file Richard that Myriam Abramson (help with graphics, 11/17/02 04:39 Richard pm) uploaded. But lyx cannot seem to handle eps files from R. Richard I am attaching one example for people to try. I would like to Richard know if LyX can render this eps - my LyX 1.2.1 doesn't. It works fine for me with 1.2.2cvs, in two different environments: - redhat 7.1, xforms 0.89.5, ImageMagick 5.2.7, ghostscript 7.0 - tru64 4.0f, xforms 0.88.1, ImageMagick 3.7.8, ghostscript 7.0 Do you still have this problem if the file name does not contain multiple dots? JMarc
Re: LyX not rendering graphics
On Mon, 18 Nov 2002, Ronald Pagel wrote: Richard A. Bilonick wrote: To what format does the eps file have to be converted so that it will display in LyX? I am able to display the eps file that Myriam Abramson (help with graphics, 11/17/02 04:39 pm) uploaded. But lyx cannot seem to handle eps files from R. I am attaching one example for people to try. I would like to know if LyX can render this eps - my LyX 1.2.1 doesn't. Rick B. LyX has problems to convert files with more than one point in their names. Rename your file to pm25timeplot.eps and it will show up. This seems to be a LyX-bug similar to that with underscores in math formular names. Ronald I tried Ronalds tip and then LyX rendered the plot properly, before that it didn't. Has anybody filed a bug report on this? /Christian -- Christian Ridderström, +46-8-790 91 37 http://www.md.kth.se/~chr Mechatronics lab, Dept. of Machine Designhttp://www.md.kth.se
Re: LyX not rendering graphics
Jean-Marc Lasgouttes wrote: Richard == Richard A Bilonick [EMAIL PROTECTED] writes: Richard Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads Fehler bei der Konvertierung in ein darstellbares Format Try to install ImageMagick and run Edit-Reconfigure Andre' Richard To what format does the eps file have to be converted so that Richard it will display in LyX? I am able to display the eps file Richard that Myriam Abramson (help with graphics, 11/17/02 04:39 Richard pm) uploaded. But lyx cannot seem to handle eps files from R. Richard I am attaching one example for people to try. I would like to Richard know if LyX can render this eps - my LyX 1.2.1 doesn't. It works fine for me with 1.2.2cvs, in two different environments: - redhat 7.1, xforms 0.89.5, ImageMagick 5.2.7, ghostscript 7.0 - tru64 4.0f, xforms 0.88.1, ImageMagick 3.7.8, ghostscript 7.0 Do you still have this problem if the file name does not contain multiple dots? JMarc Removing the extra periods allows the graphic to render. I hope this will be fixed eventually because it will be very inconvenient not to be able to use periods to make the file names more readable. With hundreds of files, it is difficult to keep track of them with dos-like names. Thanks. Rick B.
LyX not rendering graphics
Since more than a year I have watched the list and the discussion concerning the problem that LyX renders graphics only sporadically on fast computers - I still have the problem and tried the sporadic tips to solve the problem - without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 to 1.2.1, but was unable to compile the sources - because of the cc1plus error. Now I have succeeded in part and feel that there might be somebody out there knowing the ultimate solution. Here is what I did: When I asked to check the dependencies, the output was: # rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm error: failed dependencies: tetex-xdvi is needed by lyx-1.2.1-1 tetex-latex is needed by lyx-1.2.1-1 libstdc++.so.5 is needed by lyx-1.2.1-1 libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 perl(Cwd) is needed by lyx-1.2.1-1 perl(File::Basename) is needed by lyx-1.2.1-1 perl(FileHandle) is needed by lyx-1.2.1-1 perl(lib) is needed by lyx-1.2.1-1 perl(strict) is needed by lyx-1.2.1-1 perl(vars) is needed by lyx-1.2.1-1 So I installed 1.2.1 from the binary rpm using --nodeps and supplied both libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link to libstdc++.so.5 was generated and ldconfig was run). Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads "Fehler bei der Konvertierung in ein darstellbares Format" Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
LyX not rendering graphics
I sent a request for help some minutes ago --- the problem is solved! I had to disable my ~/.lyx directory, and now it works and I see all the graphics displayed. My beloved keybinding files blocked both the rendering of graphics and the possibility to input keystrokes from the keyboard. Norbert -- Dr. Norbert StribeckUniversity of Hamburgvoice +49-40-42838-3615 - polymer physicist -Institute TMCfax +49-40-42838-6008 http://www.chemie.uni-hamburg.de/tmc/stribeck http://www.stribeck.de
Re: LyX not rendering graphics
On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: > Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see > graphics sporadically any more. Instead I get an error message in each > graphics box telling me that the conversion into a display format failed. In > fact, the message is in German and reads "Fehler bei der Konvertierung in ein > darstellbares Format" Try to install ImageMagick and run Edit->Reconfigure Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Norbert Stribeck wrote: Since more than a year I have watched the list and the discussion concerning the problem that LyX renders graphics only sporadically on fast computers - I still have the problem and tried the sporadic tips to solve the problem - without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 to 1.2.1, but was unable to compile the sources - because of the cc1plus error. Now I have succeeded in part and feel that there might be somebody out there knowing the ultimate solution. Here is what I did: When I asked to check the dependencies, the output was: # rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm error: failed dependencies: tetex-xdvi is needed by lyx-1.2.1-1 tetex-latex is needed by lyx-1.2.1-1 libstdc++.so.5 is needed by lyx-1.2.1-1 libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 perl(Cwd) is needed by lyx-1.2.1-1 perl(File::Basename) is needed by lyx-1.2.1-1 perl(FileHandle) is needed by lyx-1.2.1-1 perl(lib) is needed by lyx-1.2.1-1 perl(strict) is needed by lyx-1.2.1-1 perl(vars) is needed by lyx-1.2.1-1 So I installed 1.2.1 from the binary rpm using --nodeps and supplied both libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link to libstdc++.so.5 was generated and ldconfig was run). Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads "Fehler bei der Konvertierung in ein darstellbares Format" Norbert I'm in a similar (sinking) boat. In previous versions of LyX, the graphics would almost always render. At most, I would just have to restart LyX and rendering would work again. Now that I've installed 1.2.1 for RH 8.0 and using xforms 0.89 (after upgrading to RH 8.0), rendering just does NOT work at all. (Not quite true - it doesn't work on eps files created by R.) This is on three Intel PCs all running RH 8.0 (one is a laptop, the other two are desktop systems). I can't be sure the problem doesn't have something to do with Redhat 8.0. Or it may be that all the eps files I'm creating come from R (they used to render OK and they are eps files.) But I cannot fix it and have seen NOTHING on the list that has helped. Someone did suggest turning on debuggind ("lyx -dbg graphics" or "lyx -dbg any") but that just tells me the conversion doesn't work - even though all the software needed for the conversion is readily available on all three systems - I can do it manually - and if the conversion wasn't in the preferences I added it. LyX installed differently on each system. On at least one I had to even get it to just view in PS and PDF. Viewing in HTML gives a screwy message about the file name having more than one period and that dvips can't handle it. I have to rename the file so there is only one period. Fortunately I guess I can live without rendering in LyX just so long as it prints and views OK. Just for your information, I always use "rpm -U --test" before actually installing the binary. rpm never reported any problem either in test mode or when I actually installed the software. There were no conflicts and it didn't complain about any missing software - LyX installed (as it had in the past) without any error messages or warnings. Everything seems to work except for rendering (and viewing on one system) out of the box. At least for me, the rendering error message is in English. I miss the days when I could just install a new version of LyX and continue doing actual work. If anyone can explain how to fix this I would certainly appreciate it. Rick B.
Re: LyX not rendering graphics
Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads "Fehler bei der Konvertierung in ein darstellbares Format" Try to install ImageMagick and run Edit->Reconfigure Andre' ImageMagick 5.4.7 is installed and reconfiguring does not help. Nor does disabling the .lyx file. Rick B.
Re: LyX not rendering graphics
I had a similar problem, but I was under RH 7.0: graphics would *never* show up under Lyx 1.2.1. This weekend I got pissed about it and after a while I came to the idea of reinstalling ImageMagick, uploading from 5.3.3. to 5.5.*. It worked... seems that "convert" was failing before. In any case there is room for improvement in the way images are handled now, because the text jumps to the beginning when a new image is rendered, and the conversion process takes a long time in a document with several of them. Maybe the procedures should be reviewed somehow.. jb > > >Since more than a year I have watched the list and the discussion concerning > >the problem that LyX renders graphics only sporadically on fast computers - > I > >still have the problem and tried the sporadic tips to solve the problem - > >without success for SuSE 7.3 and SuSE 8.0. I have tried to update from 1.1.6 > > >to 1.2.1, but was unable to compile the sources - because of the cc1plus > >error. Now I have succeeded in part and feel that there might be somebody ou > t > >there knowing the ultimate solution. Here is what I did: > > > >When I asked to check the dependencies, the output was: > ># rpm -Uvh lyx-1.2.1-1rh8-xforms089.i386.rpm > >error: failed dependencies: > >tetex-xdvi is needed by lyx-1.2.1-1 > >tetex-latex is needed by lyx-1.2.1-1 > >libstdc++.so.5 is needed by lyx-1.2.1-1 > >libstdc++.so.5(GLIBCPP_3.2) is needed by lyx-1.2.1-1 > >perl(Cwd) is needed by lyx-1.2.1-1 > >perl(File::Basename) is needed by lyx-1.2.1-1 > >perl(FileHandle) is needed by lyx-1.2.1-1 > >perl(lib) is needed by lyx-1.2.1-1 > >perl(strict) is needed by lyx-1.2.1-1 > >perl(vars) is needed by lyx-1.2.1-1 > > > >So I installed 1.2.1 from the binary rpm using --nodeps and supplied both > >libstdc++.so.5.0.0 and libgcc_s.so.1 in /usr/lib (moreover, a symbolic link > >to libstdc++.so.5 was generated and ldconfig was run). > > > >Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see > >graphics sporadically any more. Instead I get an error message in each > >graphics box telling me that the conversion into a display format failed. In > > >fact, the message is in German and reads "Fehler bei der Konvertierung in ei > n > >darstellbares Format" > > > >Norbert > > > > > I'm in a similar (sinking) boat. In previous versions of LyX, the > graphics would almost always render. At most, I would just have to > restart LyX and rendering would work again. Now that I've installed > 1.2.1 for RH 8.0 and using xforms 0.89 (after upgrading to RH 8.0), > rendering just does NOT work at all. (Not quite true - it doesn't work > on eps files created by R.) This is on three Intel PCs all running RH > 8.0 (one is a laptop, the other two are desktop systems). I can't be > sure the problem doesn't have something to do with Redhat 8.0. Or it may > be that all the eps files I'm creating come from R (they used to render > OK and they are eps files.) But I cannot fix it and have seen NOTHING on > the list that has helped. Someone did suggest turning on debuggind ("lyx > -dbg graphics" or "lyx -dbg any") but that just tells me the conversion > doesn't work - even though all the software needed for the conversion is > readily available on all three systems - I can do it manually - and if > the conversion wasn't in the preferences I added it. LyX installed > differently on each system. On at least one I had to even get it to just > view in PS and PDF. Viewing in HTML gives a screwy message about the > file name having more than one period and that dvips can't handle it. I > have to rename the file so there is only one period. Fortunately I guess > I can live without rendering in LyX just so long as it prints and views OK. > > Just for your information, I always use "rpm -U --test" before actually > installing the binary. rpm never reported any problem either in test > mode or when I actually installed the software. There were no conflicts > and it didn't complain about any missing software - LyX installed (as it > had in the past) without any error messages or warnings. Everything > seems to work except for rendering (and viewing on one system) out of > the box. > > At least for me, the rendering error message is in English. I miss the > days when I could just install a new version of LyX and continue doing > actual work. > > If anyone can explain how to fix this I would certainly appreciate it. > > Rick B. > >
Re: LyX not rendering graphics
Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads "Fehler bei der Konvertierung in ein darstellbares Format" Try to install ImageMagick and run Edit->Reconfigure Andre' To what format does the eps file have to be converted so that it will display in LyX? I am able to display the eps file that Myriam Abramson "(help with graphics", 11/17/02 04:39 pm) uploaded. But lyx cannot seem to handle eps files from R. I am attaching one example for people to try. I would like to know if LyX can render this eps - my LyX 1.2.1 doesn't. Rick B. pm2.5.time.plot.eps Description: PostScript document
Re: LyX not rendering graphics
On Mon, Nov 18, 2002 at 10:10:13AM -0500, Richard A. Bilonick wrote: > To what format does the eps file have to be converted so that it will > display in LyX? I believe .xpm Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: LyX not rendering graphics
Richard A. Bilonick wrote: To what format does the eps file have to be converted so that it will display in LyX? I am able to display the eps file that Myriam Abramson "(help with graphics", 11/17/02 04:39 pm) uploaded. But lyx cannot seem to handle eps files from R. I am attaching one example for people to try. I would like to know if LyX can render this eps - my LyX 1.2.1 doesn't. Rick B. LyX has problems to convert files with more than one point in their names. Rename your file to pm25timeplot.eps and it will show up. This seems to be a LyX-bug similar to that with underscores in math formular names. Ronald
Re: LyX not rendering graphics
> "Richard" == Richard A Bilonick <[EMAIL PROTECTED]> writes: Richard> Andre Poenitz wrote: >> On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: >>> Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not >>> even see graphics sporadically any more. Instead I get an error >>> message in each graphics box telling me that the conversion into a >>> display format failed. In fact, the message is in German and reads >>> "Fehler bei der Konvertierung in ein darstellbares Format" >>> >> Try to install ImageMagick and run Edit->Reconfigure >> >> Andre' >> >> Richard> To what format does the eps file have to be converted so that Richard> it will display in LyX? I am able to display the eps file Richard> that Myriam Abramson "(help with graphics", 11/17/02 04:39 Richard> pm) uploaded. But lyx cannot seem to handle eps files from R. Richard> I am attaching one example for people to try. I would like to Richard> know if LyX can render this eps - my LyX 1.2.1 doesn't. It works fine for me with 1.2.2cvs, in two different environments: - redhat 7.1, xforms 0.89.5, ImageMagick 5.2.7, ghostscript 7.0 - tru64 4.0f, xforms 0.88.1, ImageMagick 3.7.8, ghostscript 7.0 Do you still have this problem if the file name does not contain multiple dots? JMarc
Re: LyX not rendering graphics
On Mon, 18 Nov 2002, Ronald Pagel wrote: > Richard A. Bilonick wrote: > > To what format does the eps file have to be converted so that it will > > display in LyX? I am able to display the eps file that Myriam Abramson > > "(help with graphics", 11/17/02 04:39 pm) uploaded. But lyx cannot seem > > to handle eps files from R. I am attaching one example for people to > > try. I would like to know if LyX can render this eps - my LyX 1.2.1 > > doesn't. > > > > Rick B. > > > LyX has problems to convert files with more than one point in their names. > Rename your file to pm25timeplot.eps and it will show up. > This seems to be a LyX-bug similar to that with underscores in math > formular names. > > Ronald I tried Ronalds tip and then LyX rendered the plot properly, before that it didn't. Has anybody filed a bug report on this? /Christian -- Christian Ridderström, +46-8-790 91 37 http://www.md.kth.se/~chr Mechatronics lab, Dept. of Machine Designhttp://www.md.kth.se
Re: LyX not rendering graphics
Jean-Marc Lasgouttes wrote: "Richard" == Richard A Bilonick <[EMAIL PROTECTED]> writes: Richard> Andre Poenitz wrote: On Mon, Nov 18, 2002 at 03:20:07PM +0100, Norbert Stribeck wrote: Now LyX 1.2.1 works fine (even xdvi and PDF output), but I do not even see graphics sporadically any more. Instead I get an error message in each graphics box telling me that the conversion into a display format failed. In fact, the message is in German and reads "Fehler bei der Konvertierung in ein darstellbares Format" Try to install ImageMagick and run Edit->Reconfigure Andre' Richard> To what format does the eps file have to be converted so that Richard> it will display in LyX? I am able to display the eps file Richard> that Myriam Abramson "(help with graphics", 11/17/02 04:39 Richard> pm) uploaded. But lyx cannot seem to handle eps files from R. Richard> I am attaching one example for people to try. I would like to Richard> know if LyX can render this eps - my LyX 1.2.1 doesn't. It works fine for me with 1.2.2cvs, in two different environments: - redhat 7.1, xforms 0.89.5, ImageMagick 5.2.7, ghostscript 7.0 - tru64 4.0f, xforms 0.88.1, ImageMagick 3.7.8, ghostscript 7.0 Do you still have this problem if the file name does not contain multiple dots? JMarc Removing the extra periods allows the graphic to render. I hope this will be fixed eventually because it will be very inconvenient not to be able to use periods to make the file names more readable. With hundreds of files, it is difficult to keep track of them with dos-like names. Thanks. Rick B.