Ralink mini-pci express card on Lenovo X60 not working?
I'm running GENERIC.MP with ACPI enabled (20070719 snapshot) on a Thinkpad X60. I bought a GIGABYTE GN-WI05GS-RH AirCruiser G Mini-PCI-E card from kd85.com to replace the stock Intel PRO/Wireless 3945ABG. I removed the Intel card, booted the system and ran tpwireless (while docked), and then installed the Ralink. It was my understanding that the card would show up something like this: rum0 at uhub4 port 1 rum0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:16:e6:34:09:89 I've tried GENERIC.MP and GENERIC with and without ACPI, GENERIC.MP as shipped with the 20070719 snapshot, and GENERIC as shipped with the 4.1 install CD, but never saw the Ralink in dmesg. My BIOS version is 2.10 (7BETC9WW) which is dated 20070418. BIOS version 2.11 is available, but that version apparently only fixes a scenario where the system may fail to boot from the cdrom, so I haven't updated. Can someone spot a problem with the order of operations I went through when using tpwireless and installing the Ralink? Any suggestions would be very appreciated. Here is my snapshot dmesg and sysctl hw: OpenBSD 4.1-current (GENERIC.MP) #0: Fri Jul 20 10:57:59 PDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (GenuineIntel 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR real mem = 2137419776 (2038MB) avail mem = 2059104256 (1963MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/18/07, BIOS32 rev. 0 @ 0xfd690, SMBIOS rev. 2.4 @ 0xe0010 (67 entries) bios0: LENOVO 1709G3U pcibios0 at bios0: rev 2.1 @ 0xfd620/0x9e0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82371FB ISA rev 0x00) pcibios0: PCI bus #22 is the last bus bios0: ROM list: 0xc/0xea00! 0xcf000/0x1000 0xd/0x1000 0xdc000/0x4000! 0xe/0x1! acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT SSDT acpitimer0 at acpi0: 3579545 Hz, 24 bits acpi device at acpi0 from table DSDT not configured acpi device at acpi0 from table FACP not configured acpi device at acpi0 from table SSDT not configured acpi device at acpi0 from table ECDT not configured acpi device at acpi0 from table TCPA not configured acpimadt0 at acpi0 table APIC addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (GenuineIntel 686-class) 2 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins ioapic0: duplicate apic id, remapped to apid 2 acpi device at acpi0 from table MCFG not configured acpihpet0 at acpi0 table HPET: 14318179 Hz acpi device at acpi0 from table BOOT not configured acpi device at acpi0 from table SSDT not configured acpi device at acpi0 from table SSDT not configured acpi device at acpi0 from table SSDT not configured acpi device at acpi0 from table SSDT not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 0 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus 4 (EXP2) acpiprt5 at acpi0: bus 12 (EXP3) acpiprt6 at acpi0: bus 21 (PCI1) acpiec0 at acpi0: EC__ acpicpu0 at acpi0 C3, C2 acpicpu1 at acpi0 C3, C2 acpitz0 at acpi0, critical temperature: 127 degC acpitz1 at acpi0, critical temperature: 97 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0: model: 93P5029 serial: 437 type: LION oem: SANYO acpibat1 at acpi0: BAT1: not present acpibat2 at acpi0: BAT2: not present acpiac0 at acpi0: AC unit online acpidock0 at acpi0: GDCK: docked (15) cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130c2406000c24 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 2000 MHz (1276 mV): speeds: 2000, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 82945GM MCH rev 0x03 vga1 at pci0 dev 2 function 0 Intel 82945GM Video rev 0x03: aperture at 0xee10, size 0x1000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) Intel 82945GM Video rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x02: apic 2 int 17 (irq 11) azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0 azalia0: RIRB time out audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x02 pci1 at ppb0 bus 2 em0 at pci1 dev 0 function 0 Intel PRO/1000MT (82573L) rev 0x00: apic 2 int 16 (irq 11),
hostapd(8): WDS == IAPP ?
Greetings, In the context of hostapd(8) are IAPP and WDS synonymous? I need to extend my wireless network which uses an OpenBSD/i386 box with a ral (4) in HostAP mode and I'd like to do it with something much smaller and energy efficient such as an Airport Express or similar. If the answer is no, are there any recommendations for how to do this? Any advice will be appreciated. Thanks in advance, Damon
Re: OpenCON 2007 Poster material / conference info ?
Thanks -- I think ;) How about the Call For Papers? What kind of topics are sought? It's often a good idea to have the CFP up when the web page first goes public. -Lars fabioFVZ wrote: On 14:54 Thu 19 Jul , Lars NoodC)n wrote: I have a flyer for OpenCON 2007 in hand, but the web site is still devoid of details for this year's conference: http://www.opencon.org/ Where can I find the details about this year's program and schedule? (Prior to the conference.) first days of September :) fabioFVZ
Re: hostapd(8): WDS == IAPP ?
On 2007/07/22 22:50, Damon McMahon wrote: In the context of hostapd(8) are IAPP and WDS synonymous? No, IAPP is a protocol used between APs to forward association details, WDS uses a different over-air frame format with space for another MAC address (I don't know if that's supported here).
Accredito temporaneamente bloccato
[IMAGE] Ultime da Poste Italiane: Gentile Cliente, Ci e' arrivata una segnalazione di accredito di Euro 139 ricevuta il giorno 22/07/2007 da UFFICIO POSTALE di NAPOLI 4. L'accredito e' stato temporaneamente bloccato a causa dell'incongruenza dei suoi dati, potra' ora verificare i suoi dati e successivamente sara' accreditato sul suo conto postale. Accedi a Poste.it ; Acceda al servizio accrediti online di Poste.it e verifichi le sue operazioni bancarie Sai che da oggi offriamo il doppio dei servizi? Vi offriamo solo servizi sicuri e di alta qualita'. Cordiali saluti, Poste Italiane Societa' del gruppo: [IMAGE] [IMAGE] [IMAGE] [IMAGE] [IMAGE] Ti preghiamo di non inviare alcuna risposta a questo messaggio e-mail, poiche' non verra' presa in considerazione.
Re: Zurich OpenBSD
Edd Barrett wrote: I have actually never seen anyone in the UK wearing a bsd shirt apart from my friends.Sometimes I wonder if I am the only british OpenBSD user :p 'nother one here in South Wales. And another (Selsey, near Chichester). Steve http://www.fivetrees.com
typo in sys/dev/ic/rtl81x9reg.h ?
Hello! subject: #define RL_PSTATE_D00x #define RL_PSTATE_D10x0002 - typo ? #define RL_PSTATE_D20x0002 #define RL_PSTATE_D30x0003 /maxim
wpi3945 driver bug?
I am using the wpi3945 driver with the latest wpi-firmware (2.4.14). When I am not using my wireless connection for some time, because the laptop is staying switched on and unused for some time, I do get a wireless time-out. The OpenBSD is Obsd-current snap 20-07-07, but the issue was already there as long as I am using Obsd (about three months now). Is this a driver bug or can it be solved another way? Jan
Disk array controller
Does openbsd support any disk array controller for usage in DELL SAN solutions? Is anyone using any? Thanks in advance.
Re: Ralink mini-pci express card on Lenovo X60 not working?
On Sun, 22 Jul 2007 01:19:05 -0700 Don Scott [EMAIL PROTECTED] wrote: I'm running GENERIC.MP with ACPI enabled (20070719 snapshot) on a Thinkpad X60. I bought a GIGABYTE GN-WI05GS-RH AirCruiser G Mini-PCI-E card from kd85.com to replace the stock Intel PRO/Wireless 3945ABG. I removed the Intel card, booted the system and ran tpwireless (while docked), and then installed the Ralink. It was my understanding that the card would show up something like this: I don't know if this applies to you but recent Thinkpads block unknown hardware. Only hardware signed by Lenovo is allowed and recognized. I think there was a patch to circumvent this for the *40 series but not (yet?) for the *60. Anyway, the 3945ABG works fine for me in my T60 with the wpi driver. Best regards, Jona
Re: Ralink mini-pci express card on Lenovo X60 not working?
On 2007/07/23 01:01, Jona Joachim wrote: I don't know if this applies to you but recent Thinkpads block unknown hardware. Only hardware signed by Lenovo is allowed and recognized. I think there was a patch to circumvent this for the *40 series but not (yet?) for the *60. Don't know X60 but X40 refuse to boot with a non-whitelisted card. I'd check the card is correctly inserted...
Nut Belkin UPS Problem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I have an old Belkin F6C525-SER ups attached to serial port 1. When /usr/local/bin/upsdrvctl start runs, it finds identifies the ups correctly. Also, no problem when /usr/local/sbin/upsd runs. But, when /usr/local/sbin/upsmon runs, I get: Broadcast Message from [EMAIL PROTECTED] ((not a tty)) at whatever time run . . . communications lost to the UPS Repeat 1st line (Broadcast etc) A UPS is unavailable (can't be contacted for monitoring) Below are all the pertinent uncommented settings in nuts config files. (snippet from /etc/nut/ups.conf) I've tried entering different labels here, including the actual identification of the ups, F6C525-SER along with anywhere else it's required to match. Didn't help. I assumed this was an arbitrary setting only mattered in that it has to match in any other config files it's used in. [belkinups] driver = belkin port = /dev/tty00 desc = bubbhasbox (snippet from /etc/nut/upsd.conf) ACL all 0.0.0.0/0 ACL localhost 127.0.0.1 ACCEPT localhost REJECT all # == MAXAGE 15 (snippet from /etc/nut/upsd.users) [dennyboy] password = allowfrom = localhost actions = SET instcmds = ALL upsmon master # # The matching MONITOR line in your upsmon.conf would look like this: # # MONITOR [EMAIL PROTECTED] 1 monuser pass master (or slave) (snippet from /etc/nut/upsmon.conf) RUN_AS_USER nutmon # This user added as per docs MONITOR [EMAIL PROTECTED]:5678 1 dennyboy master I've also tried this without a port after localhost. No difference. Still doesn't work. I may have misunderstood the docs, but there were instructions without a port being appended also. # -- MINSUPPLIES 1 # -- SHUTDOWNCMD /sbin/shutdown -h -p +0 # -- NOTIFYCMD /usr/local/bin/notifyme.sh # -- POLLFREQ 10 # -- POLLFREQALERT 10 # -- HOSTSYNC 15 # -- DEADTIME 30 # -- POWERDOWNFLAG /etc/killpower # Pertinent script added to /etc/rc.shutdown as per docs # -- NOTE: I changed each instance of %s to belkinups just like the label in ups.conf # NOTIFYMSG NOCOMM A UPS is unavailable (can't be contacted for monitoring) NOTIFYMSG COMMOK Communications established with UPS NOTIFYMSG COMMBAD Communications lost to the UPS NOTIFYMSG ONLINE UPS belkinups is getting line power NOTIFYMSG ONBATT Someone pulled the plug on belkinups NOTIFYMSG LOWBATT UPS belkinups has a low battery NOTIFYMSG FSD UPS is being shutdown by the master # # Note that %s is replaced with the identifier of the UPS in question. # -- RBWARNTIME 43200 # -- NOCOMMWARNTIME 300 # -- FINALDELAY 5 Just wanted to say that I've read the docs man pages numerous times searched extensively through mailing list archives, experimented with the settings until I ran out of ideas, before asking about this on the list. It's either something I'm missing, misunderstanding, or possibly a peculiarity with my hardware. Any help greatly appreciated. Denny White -- ___ ___ / __/ _ \/ __/__ / _\ \/ // / _//___/ / /___//_/ /_/ [ 1987 - 2007 ] http://sdf.lonestar.org Public Access Unix System === GnuPG key : 0x1644E79A | http://wwwkeys.nl.pgp.net Fingerprint: D0A9 AD44 1F10 E09E 0E67 EC25 CB44 F2E5 1644 E79A === iD8DBQFGpCf4y0Ty5RZE55oRAkOTAJsE9YWl7G8unYpMDOgpZB7VvP0TQACgsQAn VUa9ASlqcKsdR42ypfYU4+Q= =SXZT -END PGP SIGNATURE-
Re: typo in sys/dev/ic/rtl81x9reg.h ?
On Sun, Jul 22, 2007 at 10:12:03PM +0200, Maxim Bourmistrov wrote: Hello! subject: #define RL_PSTATE_D00x #define RL_PSTATE_D10x0002 - typo ? #define RL_PSTATE_D20x0002 #define RL_PSTATE_D30x0003 /maxim Yes, but these a) aren't used and b) are the values already specified in the standard PCI power capabilities From dev/pci/pcireg.h: /* * Power Management Control Status Register; access via capability pointer. */ #define PCI_PMCSR 0x04 #define PCI_PMCSR_STATE_MASK0x03 #define PCI_PMCSR_STATE_D0 0x00 #define PCI_PMCSR_STATE_D1 0x01 #define PCI_PMCSR_STATE_D2 0x02 #define PCI_PMCSR_STATE_D3 0x03 I'll look into removing the RL definitions later today.
