Re: low power device
On September 19, 2014 5:50:27 AM CEST, Liviu Daia liviu.d...@gmail.com wrote: On 18 September 2014, Stan Gammons sg063...@gmail.com wrote: Yes, the APU has a serial console. Baud rate is 115,200. To install OpenBSD, boot from a CD. At the boot prompt, before it times out and continues to boot, type stty com0 115200 and press return. Then type set tty com0 and press return. Then press return at the boot prompt to continue the boot process. Choose yes when the install ask if you want to use com0 as the console. In order to boot from a CD you need an USB CD-ROM. If you don't have an USB CD-ROM you can just make a live USB flash disk (see FAQ 14.17.3), boot from it, and install the system over network. Or you could just download minirootXY.fs or installXY.fs from your favourite openbsd http mirror, and dd it to a USB stick. /Alexander Alternatively, you can take out the mSATA / SD card from APU, put it in an enclosure / card reader, connect it to a computer, install the system on it, then mount it back in the APU. But, on a side note, a live USB flash disk is an useful thing to have around anyway. You can take it with you, and turn (almost) any Windows PC into an useful terminal in less than a minute. :) Regards, Liviu Daia
unbound
Hi, I want add my global domain in my serwer dns unbound... How to do? I don't add local domain: local-data: example.com 10800 IN A local_IP but I want add mu global domain end record A for public_IP in global network. I konw how add my domain in named(bind): zone example.com { type master; file example.com.hosts; allow-update { none; }; allow-transfer { 111.111.111.111; }; notify yes; }; end add record A in example.com.hosts. but I don't konw add in unbount I greet Krzych
videos in the browser
with a recent configuration, videos work fine in the browser. *however* a lot of websites still give you only flash videos. Or do they ? There's this nifty extension in chrome to fudge the user-agent (called user-agent switcher) where you can play at browsing from a tablet. Surprise: those video sites work again (in some cases, you have to fight a bit more, go explicitly to the mobile version and not let them switch you back to the desktop mode). It's obvious those guys aren't testing on OpenBSD. It's also obvious they know how to switch to a non flash version on given user-agents. So what about a little mail your favorite website campaign. Figure out one website where you can't watch videos, and send some kind of email feedback to them. Tell them in no uncertain terms that flash does not exist on OpenBSD, and if they see OpenBSD in the user-agent, then they should go to plain h264 videos, which they have. Offenders include youtube (sometimes, mostly VEVO stuff), wimp.com, facebook. Probably some others. I don't think they will notice if I'm the only guy doing that. But if they get a few pointed emails over the coming weeks, maybe they might fix their act, and hey, maybe we'll get videos mostly everywhere...
Re: videos in the browser
On Fri, Sep 19, 2014 at 12:48 PM, Marc Espie es...@nerim.net wrote: with a recent configuration, videos work fine in the browser. *however* a lot of websites still give you only flash videos. Or do they ? There's this nifty extension in chrome to fudge the user-agent (called user-agent switcher) where you can play at browsing from a tablet. Surprise: those video sites work again (in some cases, you have to fight a bit more, go explicitly to the mobile version and not let them switch you back to the desktop mode). This[1] also works fine for many of the most famous video websites... [1] http://isebaro.com/viewtube/?ln=en Ciao! David -- If you try a few times and give up, you'll never get there. But if you keep at it... There's a lot of problems in the world which can really be solved by applying two or three times the persistence that other people will. -- Stewart Nelson
Re: videos in the browser
Great idea. I think it would help if we all use the same destination email addresses as in big companies there are plenty of different points of contact and if each one of them only gets 1 or 2 emails we will likely remain unheard. Marc can you please share the email addresses you used to reach out to Facebook and Youtube? On 19 September 2014 13:48, Marc Espie es...@nerim.net wrote: with a recent configuration, videos work fine in the browser. *however* a lot of websites still give you only flash videos. Or do they ? There's this nifty extension in chrome to fudge the user-agent (called user-agent switcher) where you can play at browsing from a tablet. Surprise: those video sites work again (in some cases, you have to fight a bit more, go explicitly to the mobile version and not let them switch you back to the desktop mode). It's obvious those guys aren't testing on OpenBSD. It's also obvious they know how to switch to a non flash version on given user-agents. So what about a little mail your favorite website campaign. Figure out one website where you can't watch videos, and send some kind of email feedback to them. Tell them in no uncertain terms that flash does not exist on OpenBSD, and if they see OpenBSD in the user-agent, then they should go to plain h264 videos, which they have. Offenders include youtube (sometimes, mostly VEVO stuff), wimp.com, facebook. Probably some others. I don't think they will notice if I'm the only guy doing that. But if they get a few pointed emails over the coming weeks, maybe they might fix their act, and hey, maybe we'll get videos mostly everywhere... -- The best the little guy can do is what the little guy does right
Re: videos in the browser
On Fri, Sep 19, 2014 at 12:55:59PM +0200, David Coppa wrote: On Fri, Sep 19, 2014 at 12:48 PM, Marc Espie es...@nerim.net wrote: with a recent configuration, videos work fine in the browser. *however* a lot of websites still give you only flash videos. Or do they ? There's this nifty extension in chrome to fudge the user-agent (called user-agent switcher) where you can play at browsing from a tablet. Surprise: those video sites work again (in some cases, you have to fight a bit more, go explicitly to the mobile version and not let them switch you back to the desktop mode). This[1] also works fine for many of the most famous video websites... [1] http://isebaro.com/viewtube/?ln=en David, please do another thread if you want to discuss that. There are lots of hackish solutions to get videos on openbsd anyway. The point here is to try to get more things working out of the box by asking the sites and telling them there are OpenBSD users out there that would like to get videos just working.
Re: videos in the browser
On Fri, Sep 19, 2014 at 01:57:34PM +0300, Eugene Yunak wrote: Great idea. I think it would help if we all use the same destination email addresses as in big companies there are plenty of different points of contact and if each one of them only gets 1 or 2 emails we will likely remain unheard. Marc can you please share the email addresses you used to reach out to Facebook and Youtube? I just used their standard feedback contact form.
SATA USB 3.0 PCI support
I've installed OpenBSD 5.5/amd64 on an HP workstation. I'd like to add additional SATA drives and add USB 3.0 (for backup to umass) to the HP but I'm having difficulty finding the OpenBSD supported hardware/chipset page (I thought there was a page for this). I found a SYBA Combo USB 3.0 + SATA III 6Gbps, v2.0 PCI Express, x4 Slot Controller Card (on newegg) that has the Etron EJ168a ASMedia ASM1061 chips. Would this work with OpenBSD 5.5? If not, does anyone have a recommendation for a singe or multiple PCI boards? Thanks, Joe
4k graphics and openbsd
Good afternoon, Friday question: Does anyone have recommendation on graphics hardware to use for 4k screens and OpenBSD ? I'm thinking about improving my workstation. I run lots of terminal windows, a web browser, and the default window manager. As I like eye candy I may even do xsetroot -solid black. What I want is a stable work environment where I can reboot my workstation every 6 months or so. This with a 4k screen. Doable ? Cheers /Tony
Re: unbound
Am 19.09.2014 um 12:28 schrieb Krzysztof Strzeszewski: ... I want add my global domain in my serwer dns unbound... How to do? I don't add local domain: local-data: example.com 10800 IN A local_IP but I want add mu global domain end record A for public_IP in global network. I konw how add my domain in named(bind): zone example.com { type master; file example.com.hosts; allow-update { none; }; allow-transfer { 111.111.111.111; }; notify yes; }; end add record A in example.com.hosts. ... hi Krzych, as a read it correctly - you seem to be out of luck, because unbound is just a resolving nameserver an no full authoritative one. Your first step, by using a combination of local-zone: and local-data: should be the best choice. Otherwise you can configure a stub resolver, but this one has to be an authoritative one as well like e.g. bind oder nsd. Concening the RR in my opinion you should be able to use non RFC1918 addresses in these config-parts as well - but I haven't tested it yet. Regards, Marco
Re: videos in the browser
Hi, I don't think that any web developer care OpenBSD because OpenBSD doesn't have graphical browser in base system. They don't care even if 1000 OpenBSD users complain. Flash material will disappear from web less than three years and Flash videos will get replaced by Mpeg-4 AVC and WebM. I personally think that OpenBSD should embrace HTML5/ECMA Script by adding Web component + minimalistic browser around it to the base system in some point of future. Major reason for this is that web has become both defacto and dejure technology for graphical remote use and also it is standard way to create GUI. X clients are legacy today. This is even possible to do, because needed software components are almost completely available in BSD licenses. After all, I think top secure system should also allow running applications in secured manner, but it may cause challenges to avoid security holes.
tools for monitoring network traffic
Hello, just a simple question with a properbly more complicated answer. Are there tools out there to simply monitor the network traffic for a webserver so you get information about which domain caused which traffic over a week or a day? I know I could go and reinvent the wheel by using pf and other tools but since Im a lazy guy I want to look for a solution that is already out there. Thx for the help :) Regards -- Markus Rosjatfon: +49 351 8107223mail: ros...@ghweb.de G+H Webservice GbR Gorzolla, Herrmann Königsbrücker Str. 70, 01099 Dresden http://www.ghweb.de fon: +49 351 8107220 fax: +49 351 8107227 Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before you print it, think about your responsibility and commitment to the ENVIRONMENT
Re: SATA USB 3.0 PCI support
On Thu, Sep 18, 2014 at 06:31:13PM -0500 or thereabouts, repays95...@mypacks.net wrote: I've installed OpenBSD 5.5/amd64 on an HP workstation. I'd like to add additional SATA drives and add USB 3.0 (for backup to umass) to the HP but I'm having difficulty finding the OpenBSD supported hardware/chipset page (I thought there was a page for this). I found a SYBA Combo USB 3.0 + SATA III 6Gbps, v2.0 PCI Express, x4 Slot Controller Card (on newegg) that has the Etron EJ168a ASMedia ASM1061 chips. Would this work with OpenBSD 5.5? If not, does anyone have a recommendation for a singe or multiple PCI boards? Thanks, Joe There is no usb 3.0 driver in 5.5 It is still under development. Regards Moss
Re: videos in the browser
As a webdeveloper, I don't care what you think. I have strong suspicion OpenBSD devs don't care either. On 19 September 2014 15:36, Matti Karnaattu mkarnaa...@gmail.com wrote: Hi, I don't think that any web developer care OpenBSD because OpenBSD doesn't have graphical browser in base system. They don't care even if 1000 OpenBSD users complain. Flash material will disappear from web less than three years and Flash videos will get replaced by Mpeg-4 AVC and WebM. I personally think that OpenBSD should embrace HTML5/ECMA Script by adding Web component + minimalistic browser around it to the base system in some point of future. Major reason for this is that web has become both defacto and dejure technology for graphical remote use and also it is standard way to create GUI. X clients are legacy today. This is even possible to do, because needed software components are almost completely available in BSD licenses. After all, I think top secure system should also allow running applications in secured manner, but it may cause challenges to avoid security holes. -- The best the little guy can do is what the little guy does right
Re: videos in the browser
I'll get the popcorns. On Sep 19, 2014 3:38 PM, Matti Karnaattu mkarnaa...@gmail.com wrote: Hi, I don't think that any web developer care OpenBSD because OpenBSD doesn't have graphical browser in base system. They don't care even if 1000 OpenBSD users complain. Flash material will disappear from web less than three years and Flash videos will get replaced by Mpeg-4 AVC and WebM. I personally think that OpenBSD should embrace HTML5/ECMA Script by adding Web component + minimalistic browser around it to the base system in some point of future. Major reason for this is that web has become both defacto and dejure technology for graphical remote use and also it is standard way to create GUI. X clients are legacy today. This is even possible to do, because needed software components are almost completely available in BSD licenses. After all, I think top secure system should also allow running applications in secured manner, but it may cause challenges to avoid security holes.
Re: tools for monitoring network traffic
Hello Markus, have you checked pflow? Regards, Ville On Sep 19, 2014 4:11 PM, Markus Rosjat ros...@ghweb.de wrote: Hello, just a simple question with a properbly more complicated answer. Are there tools out there to simply monitor the network traffic for a webserver so you get information about which domain caused which traffic over a week or a day? I know I could go and reinvent the wheel by using pf and other tools but since Im a lazy guy I want to look for a solution that is already out there. Thx for the help :) Regards -- Markus Rosjatfon: +49 351 8107223mail: ros...@ghweb.de G+H Webservice GbR Gorzolla, Herrmann Königsbrücker Str. 70, 01099 Dresden http://www.ghweb.de fon: +49 351 8107220 fax: +49 351 8107227 Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before you print it, think about your responsibility and commitment to the ENVIRONMENT
Re: tools for monitoring network traffic
I use Bro and Argus http://qosient.com/argus/ http://bro.org On Fri, Sep 19, 2014 at 9:10 AM, Markus Rosjat ros...@ghweb.de wrote: Hello, just a simple question with a properbly more complicated answer. Are there tools out there to simply monitor the network traffic for a webserver so you get information about which domain caused which traffic over a week or a day? I know I could go and reinvent the wheel by using pf and other tools but since Im a lazy guy I want to look for a solution that is already out there. Thx for the help :) Regards -- Markus Rosjatfon: +49 351 8107223mail: ros...@ghweb.de G+H Webservice GbR Gorzolla, Herrmann Königsbrücker Str. 70, 01099 Dresden http://www.ghweb.de fon: +49 351 8107220 fax: +49 351 8107227 Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before you print it, think about your responsibility and commitment to the ENVIRONMENT
Re: Available disks are: none at installation of OpenBSD 5.5
Thanks for the tip, I now tried OpenBSD 5.6-current from the FTP snapshot but still no disks available. As suggested by the others I post here below the full dmesg output: OpenBSD 5.6-current (RAMDISK_CD) #351: Wed Sep 17 12:10:28 MDT 2014 t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 17101213696 (16308MB) avail mem = 16640602112 (15869MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec120 (77 entries) bios0: vendor American Megatrends Inc. version 4.6.5 date 03/19/2014 bios0: Intel EPGSVR acpi0 at bios0: rev 2 acpi0: sleep states S0 acpi0: tables DSDT FACP APIC FPDT SSDT MCFG HPET SSDT SSDT SPMI ASF! SPCR DMAR EINJ ERST HEST BERT acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU E3-1275 v3 @ 3.50GHz, 3691.92 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 99MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (RP01) acpiprt2 at acpi0: bus 5 (RP04) acpiprt3 at acpi0: bus 1 (P0P2) acpiprt4 at acpi0: bus 2 (P0PA) acpiprt5 at acpi0: bus 3 (P0PB) acpiprt6 at acpi0: bus 1 (PEG0) acpiprt7 at acpi0: bus 2 (PEG1) acpiprt8 at acpi0: bus 3 (PEG2) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 Intel Xeon E3-1200 v3 Host rev 0x06 ppb0 at pci0 dev 1 function 0 Intel Core 4G PCIE rev 0x06: msi pci1 at ppb0 bus 1 ix0 at pci1 dev 0 function 0 Intel 82599 rev 0x01: msi, address 00:10:f3:2b:1b:9c ix1 at pci1 dev 0 function 1 Intel 82599 rev 0x01: msi, address 00:10:f3:2b:1b:9d ppb1 at pci0 dev 1 function 1 Intel Core 4G PCIE rev 0x06: msi pci2 at ppb1 bus 2 em0 at pci2 dev 0 function 0 Intel I350 rev 0x01: msi, address 00:10:f3:3b:70:a2 em1 at pci2 dev 0 function 1 Intel I350 rev 0x01: msi, address 00:10:f3:3b:70:a3 em2 at pci2 dev 0 function 2 Intel I350 rev 0x01: msi, address 00:10:f3:3b:70:a4 em3 at pci2 dev 0 function 3 Intel I350 rev 0x01: msi, address 00:10:f3:3b:70:a5 ppb2 at pci0 dev 1 function 2 Intel Core 4G PCIE rev 0x06: msi pci3 at ppb2 bus 3 em4 at pci3 dev 0 function 0 Intel I350 rev 0x01: msi, address 00:10:f3:3b:70:a6 em5 at pci3 dev 0 function 1 Intel I350 rev 0x01: msi, address 00:10:f3:3b:70:a7 em6 at pci3 dev 0 function 2 Intel I350 rev 0x01: msi, address 00:10:f3:3b:70:a8 em7 at pci3 dev 0 function 3 Intel I350 rev 0x01: msi, address 00:10:f3:3b:70:a9 Intel 8 Series xHCI rev 0x05 at pci0 dev 20 function 0 not configured ehci0 at pci0 dev 26 function 0 Intel 8 Series USB rev 0x05: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb3 at pci0 dev 28 function 0 Intel 8 Series PCIE rev 0xd5: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 3 Intel 8 Series PCIE rev 0xd5: msi pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 ASPEED Technology AST1150 PCI rev 0x02 pci6 at ppb5 bus 6 vga1 at pci6 dev 0 function 0 ASPEED Technology AST2000 rev 0x21 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) ehci1 at pci0 dev 29 function 0 Intel 8 Series USB rev 0x05: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 Intel C226 LPC rev 0x05 at pci0 dev 31 function 0 not configured ahci0 at pci0 dev 31 function 2 Intel 8 Series AHCI rev 0x05: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets ahci0: attempting to idle device ahci0: stopping the port, softreset slot 31 was still active. ahci0: failed to soft reset device Intel 8 Series SMBus rev 0x05 at pci0 dev 31 function 3 not configured isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 uhub2 at uhub0 port 1 vendor 0x8087 product 0x8008 rev 2.00/0.05 addr 2 uhub3 at uhub1 port 1 vendor 0x8087 product 0x8000 rev 2.00/0.05 addr 2 uhidev0 at uhub3 port 3 configuration 1 interface 0 Logitech Logitech USB Keyboard rev 1.10/23.00 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub3 port 3 configuration 1 interface 1 Logitech Logitech USB Keyboard rev 1.10/23.00 addr 3 uhidev1: iclass 3/0, 2 report ids uhid at uhidev1 reportid 1
Re: unbound
On 2014-09-19 Fri 12:28 PM |, Krzysztof Strzeszewski wrote: I want add my global domain in my serwer dns unbound... How to do? I konw how add my domain in named(bind): $ man 8 unbound ... .. DESCRIPTION Unbound is an implementation of a DNS resolver, that does caching . Use NSD: $ man 8 nsd ... ... DESCRIPTION NSD is a complete implementation of an authoritative DNS nameserver. ... $ man 5 nsd.conf The zone file format is much the same as for named(BIND), you can probably use the same file copied in to /var/nsd/zones/master/ Something like: # nsd.conf server: verbosity: 2 hide-version: yes ip4-only: yes ip-address: pub.lic.ip.address # different privileged port on loopback for unbound stub zones: # The ARPA Host Name Server Protocol (NAMESERVER) # is an obsolete network protocol unused # http://en.wikipedia.org/wiki/ARPA_Host_Name_Server_Protocol ip-address: 127.0.0.1@42 remote-control: control-enable: yes # Master zones: zone: name: internal zonefile: master/internal zone: name: 1.168.192.in-addr.arpa zonefile: master/1.168.192.in-addr.arpa zone: name: example.not zonefile: master/example.not notify: slave.server.ip.address NOKEY provide-xfr: slave.server.ip.address NOKEY # unbound.conf server: interface: 127.0.0.1 interface: 192.168.1.1 do-ip6: no access-control: ::0/0 refuse access-control: 0.0.0.0/0 refuse access-control: 127.0.0.0/8 allow access-control: 192.168.1.0/24 allow hide-identity: yes hide-version: yes verbosity: 2 log-queries: yes root-hints: /etc/root.hints do-not-query-localhost: no # NOTE THIS!!! # private networks: private-address: 10.0.0.0/8 private-address: 100.64.0.0/10 private-address: 172.16.0.0/12 private-address: 192.0.0.0/29 private-address: 192.168.0.0/16 private-address: 198.18.0.0/15 # example source code documentation: private-address: 192.0.2.0/24 private-address: 198.51.100.0/24 private-address: 203.0.113.0/24 # subnet, autoconfiguration between two hosts on a single link: private-address: 169.254.0.0/16 # reserved for multicast assignments: private-address: 224.0.0.0/4 # reserved for future use: private-address: 240.0.0.0/4 private-domain: 'internal' local-zone: '1.168.192.in-addr.arpa' typetransparent# NOTE THIS!!! local-zone: localhost. static local-data: localhost. 10800 IN NS localhost. local-data: localhost. 10800 IN SOA localhost. nobody.invalid. 1 3600 1200 604800 10800 local-data: localhost. 10800 IN A 127.0.0.1 # Disabled: (do-ip6: no doesn't do it): # local-data: localhost. 10800 IN ::1 remote-control: control-enable: yes stub-zone: name: 'internal' stub-addr: 127.0.0.1@42 stub-zone: name: '1.168.192.in-addr.arpa' stub-addr: 127.0.0.1@42 stub-zone: name: 'example.not' stub-addr: 127.0.0.1@42 stub-addr: slave.server.ip.address stub-first: yes
Re: Available disks are: none at installation of OpenBSD 5.5
A small update: I now have tried switching to IDE mode instead of AHCI in the BIOS and also have tried two different disk devices (250 GB SATA HD, 4 GB SATA DOM) on different ports but still the same results. No drives available. On Thursday, September 18, 2014 7:33 PM, Nick Holland n...@holland-consulting.net wrote: On 09/18/14 12:27, ML mail wrote: Hi, I'm trying to install OpenBSD 5.5 (amd64) to use as a firewall on a SATA flash drive of 8 GB. Unfortuantely the drive does not get detected by OpenBSD at the installation so I am unable to install OpenBSD. The relevant output of the dmesg would be the following: If you know what the relevant output is, you could probably fix the problem. don't snip your dmesg. ... But ... sounds like sucky hw. I'd start by swapping out the SATA cables (I think I've had some issues with that). Try a real SATA disk. If the real disk works, your flash drive or its adapter is bad (or ahci-uncooperative) If it seems OpenBSD just doesn't work with that SATA port (with a real disk), try -current and see if that works better. If not, post a full dmesg so we can figure out what we are dealing with. To get running today, I'd see if you can degrade the port to non-AHCI mode -- it will be slower, but for a firewall? Who cares. Won't notice with most flash devices anyway. Or use a USB flash drive instead of a SATA. Nick.
Re: SATA USB 3.0 PCI support
repays95...@mypacks.net wrote: I've installed OpenBSD 5.5/amd64 on an HP workstation. I'd like to add additional SATA drives and add USB 3.0 (for backup to umass) Why not get a card with an eSATA port for backup? Best regards, Mikkel C. Simonsen
How to procmail sort misc@openbsd.org?
Hi all, I had the following procmail filter: 0: List-ID:.*misc.openbsd.org .OpenBSD/ The preceding didn't put this list's email in maildir folder OpenBSD. Just to make sure there was nothing wrong with the OpenBSD folder, I changed it to a known good other folder, and still, mail from this list went in my main inbox folder. So then I tried the following: 0: * ^(To|Cc).*misc.openbsd.org .OpenBSD/ Same symptom: Mail from this list went to my main inbox, not to OpenBSD. I'm stumped. Is this mailing list using some special kind of encoding that trips up procmail? Have I somehow gotten my Procmail recipes wrong? Can anyone think of *any* explanation or solution? Thanks, SteveT Steve Litt* http://www.troubleshooters.com/ Troubleshooting Training * Human Performance
Re: low power device
On 09/19/14 01:42, Steve Litt wrote: ... Very, very nice! Two questions: 1) Can I safely assume that the Realtek RTL8111E works well with OpenBSD? 2) Where's the best place to buy it if you live in the US? I saw this, which looks pretty good, given that they give you the enclosure (and I presume the heat spreader) and a wall wort: http://store.netgate.com/kit-APU1C4.aspx I've been looking for something like this for a long time. Thanks! is anybody else using this recent BIOS snapshot on the APU.1c: Build 9/8/2014 (beta, reduced spew level) The first re(4) interface isn't always recognized after reboot. I don't know if it's related to the BIOS update since I didn't play much with this board when I still had the BIOS beta from April flashed. I've seen this re0-related problem multiple times with an OpenBSD snapshot from April and also with a newer snapshot from September. The kernel sometimes also freezes at ehci0 (see attachment). So, at least my APU.1c device doesn't work reliably at all. I was thinking about getting one of these (hopefully low-power) Supermicro boards: Atom N2800-based: http://www.supermicro.com/products/motherboard/ATOM/X9/X9SCAA-L.cfm Atom S1260-based: http://www.supermicro.com/products/motherboard/ATOM/X9/X9SBAA-F.cfm http://www.supermicro.com/products/motherboard/ATOM/X9/X9SBAA.cfm Atom C2xxx-based: http://www.supermicro.com/products/motherboard/Atom/X10/A1SRi-2558F.cfm http://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2550F.cfm Celeron J1900-based: http://www.supermicro.com/products/motherboard/celeron/X10/X10SBA-L.cfm Does anybody have experience with one of the boards from above on OpenBSD? Best regards Andreas OpenBSD 5.6-current (GENERIC.MP) #372: Wed Sep 10 18:03:54 MDT 2014 t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4246003712 (4049MB) avail mem = 4124246016 (3933MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdf16d820 (7 entries) bios0: vendor coreboot version 4.0 date 09/08/2014 bios0: PC Engines APU acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SPCR HPET APIC HEST SSDT SSDT SSDT acpi0: wakeup devices AGPB(S4) HDMI(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PE20(S4) PE21(S4) PE22(S4) PE23(S4) PIBR(S4) UOH1(S3) UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD G-T40E Processor, 1000.14 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD G-T40E Processor, 1000.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec0, version 21, 24 pins acpiprt0 at acpi0: bus -1 (AGPB) acpiprt1 at acpi0: bus -1 (HDMI) acpiprt2 at acpi0: bus 1 (PBR4) acpiprt3 at acpi0: bus 2 (PBR5) acpiprt4 at acpi0: bus 3 (PBR6) acpiprt5 at acpi0: bus -1 (PBR7) acpiprt6 at acpi0: bus 5 (PE20) acpiprt7 at acpi0: bus -1 (PE21) acpiprt8 at acpi0: bus -1 (PE22) acpiprt9 at acpi0:
Re: tools for monitoring network traffic
Markus Rosjat [ros...@ghweb.de] wrote: Hello, just a simple question with a properbly more complicated answer. Are there tools out there to simply monitor the network traffic for a webserver so you get information about which domain caused which traffic over a week or a day? What about your access log? I know I could go and reinvent the wheel by using pf and other tools but since Im a lazy guy I want to look for a solution that is already out there. Unless each web site runs on a different IP address, this might be nearly impossible to do at the network level
Re: How to procmail sort misc@openbsd.org?
On Fri, Sep 19, 2014 at 11:19:47AM -0400, Steve Litt wrote: Hi all, I had the following procmail filter: 0: List-ID:.*misc.openbsd.org .OpenBSD/ The preceding didn't put this list's email in maildir folder OpenBSD. Just to make sure there was nothing wrong with the OpenBSD folder, I changed it to a known good other folder, and still, mail from this list went in my main inbox folder. So then I tried the following: 0: * ^(To|Cc).*misc.openbsd.org .OpenBSD/ Same symptom: Mail from this list went to my main inbox, not to OpenBSD. I'm stumped. This rule works for me: :0 * ^(To|Cc|Sender):.*misc@openbsd\.org openbsd-misc
Re: low power device
Andreas Bartelt [o...@bartula.de] wrote: is anybody else using this recent BIOS snapshot on the APU.1c: Build 9/8/2014 (beta, reduced spew level) The first re(4) interface isn't always recognized after reboot. I don't know if it's related to the BIOS update since I didn't play much with this board when I still had the BIOS beta from April flashed. I've seen this re0-related problem multiple times with an OpenBSD snapshot from April and also with a newer snapshot from September. The kernel sometimes also freezes at ehci0 (see attachment). So, at least my APU.1c device doesn't work reliably at all. I was thinking about getting one of these (hopefully low-power) Supermicro boards: Atom N2800-based: http://www.supermicro.com/products/motherboard/ATOM/X9/X9SCAA-L.cfm Atom S1260-based: http://www.supermicro.com/products/motherboard/ATOM/X9/X9SBAA-F.cfm http://www.supermicro.com/products/motherboard/ATOM/X9/X9SBAA.cfm Atom C2xxx-based: http://www.supermicro.com/products/motherboard/Atom/X10/A1SRi-2558F.cfm http://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2550F.cfm Celeron J1900-based: http://www.supermicro.com/products/motherboard/celeron/X10/X10SBA-L.cfm Does anybody have experience with one of the boards from above on OpenBSD? The X10SBA is a really nice board, although the C2550 based boards look nice too. Per watt, the C2550 and J1900 are very competitive with the higher end Intel CPUs. The X10SBA will be closer in price to the APU than the C2550 based boards! I've never had problems with re0 and reboots on APU although you may be right about the newer BIOS being problematic (or you may have some flaky hardware?) You should try and re-flash the April bios. I can send it over if you need the image. Chris
Re: tools for monitoring network traffic
+1 to access log. But well, if you must -- there is this https://code.google.com/p/mod-sflow/ You won't get any extra data out of it that a CustomLog directive wouldn't give you, though. On 9/20/2014 午前 12:29, Chris Cappuccio wrote: Markus Rosjat [ros...@ghweb.de] wrote: Hello, just a simple question with a properbly more complicated answer. Are there tools out there to simply monitor the network traffic for a webserver so you get information about which domain caused which traffic over a week or a day? What about your access log? I know I could go and reinvent the wheel by using pf and other tools but since Im a lazy guy I want to look for a solution that is already out there. Unless each web site runs on a different IP address, this might be nearly impossible to do at the network level
Re: 4k graphics and openbsd
On Fri, Sep 19, 2014 at 02:22:49PM +0200, Tony Sarendal wrote: Good afternoon, Friday question: Does anyone have recommendation on graphics hardware to use for 4k screens and OpenBSD ? I'm thinking about improving my workstation. I run lots of terminal windows, a web browser, and the default window manager. As I like eye candy I may even do xsetroot -solid black. What I want is a stable work environment where I can reboot my workstation every 6 months or so. This with a 4k screen. Doable ? The short version is it won't work yet, the longer version is you should carefully check what the graphics hardware, monitor and software support. For Intel the HDMI 4k at 30 Hz modes are only supported on Haswell, ie i[357]-4xxx. On the AMD side HDMI 4k at 30 Hz modes are only supported on Southern Islands parts according to http://xorg.freedesktop.org/wiki/RadeonFeature/ which are Radeon HD = 77xx. The Southern Islands parts are best avoided as xf86-video-ati only supports 2D acceleration via Glamor-EGL which on Southern Islands radeons requires a Mesa driver that has a hard requirement on LLVM, working EGL drm platform, and other things. And the kernel only knows about the initial round of Southern Islands parts, not all of those that were later released including the newer integrated graphics with Kaveri. It seems it should be possible to use 4k modes with displayport on Northern Islands/HD6xxx if the screen was presented as two smaller screens via MST as Northern Islands radeons support displayport 1.2 and MST. This isn't an option for older Intel parts as ivybridge for example only supports displayport 1.1 with no MST. The HDMI 1.4 4k modes make use of a CEA vendor extension in the blob of data from the display that describes the modes (EDID). Support for that was added in drm 3.12. Many of the 4k displays present themselves as multiple displayport displays/streams, support for that was added in drm 3.17. OpenBSD has roughly drm 3.8.13.28 at the moment. hdmi 1.4, drm 3.12 3840x2160@30Hz 3840x2160@25Hz 3840x2160@24Hz hdmi 2.0 4k @ 60Hz, drm ? displayport 1.2 4k 30Hz single stream transport (SST), drm 3.12? displayport 1.2 4k 60Hz multi stream transport (MST), drm 3.17 displayport 1.? 4k 60Hz single stream transport (4K60 SST), drm ? displayport 1.? dell 5k 5120x2880@?, MST? drm ?
Re: low power device
On 09/19/14 17:35, Chris Cappuccio wrote: Andreas Bartelt [o...@bartula.de] wrote: is anybody else using this recent BIOS snapshot on the APU.1c: Build 9/8/2014 (beta, reduced spew level) The first re(4) interface isn't always recognized after reboot. I don't know if it's related to the BIOS update since I didn't play much with this board when I still had the BIOS beta from April flashed. I've seen this re0-related problem multiple times with an OpenBSD snapshot from April and also with a newer snapshot from September. The kernel sometimes also freezes at ehci0 (see attachment). So, at least my APU.1c device doesn't work reliably at all. I was thinking about getting one of these (hopefully low-power) Supermicro boards: Atom N2800-based: http://www.supermicro.com/products/motherboard/ATOM/X9/X9SCAA-L.cfm Atom S1260-based: http://www.supermicro.com/products/motherboard/ATOM/X9/X9SBAA-F.cfm http://www.supermicro.com/products/motherboard/ATOM/X9/X9SBAA.cfm Atom C2xxx-based: http://www.supermicro.com/products/motherboard/Atom/X10/A1SRi-2558F.cfm http://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2550F.cfm Celeron J1900-based: http://www.supermicro.com/products/motherboard/celeron/X10/X10SBA-L.cfm Does anybody have experience with one of the boards from above on OpenBSD? The X10SBA is a really nice board, although the C2550 based boards look nice too. Per watt, the C2550 and J1900 are very competitive with the higher end Intel CPUs. The X10SBA will be closer in price to the APU than the C2550 based boards! I've become afraid of UEFI BIOSes since legacy mode doesn't seem to work with all of them (i.e., ASUS P9D WS). Could you successfully boot a mainboard with one of the CPUs from above on OpenBSD? Did you measure power consumption at idle? I've never had problems with re0 and reboots on APU although you may be right about the newer BIOS being problematic (or you may have some flaky hardware?) You should try and re-flash the April bios. I can send it over if you need the image. I've just reflashed the 4/5/2014 version which is now called current production -- the same problem regarding re0. So yes, probably it's a flaky NIC. Taken together with the flaky mSATA drive of some APU.1c revisions and the unusually high operating temperature, I really can't recommend this device. On the other hand, there were a couple of positive reports regarding the APU.1c on misc@, so maybe I just had bad luck... Best regards Andreas
Re: How to procmail sort misc@openbsd.org?
## put *@openbsd.org lists into their own folder, automagically :0 * ^(X-Loop: )\/[^.]+@openbsd\.org * MATCH ?? ()\/[^@]+ .openbsd.${MATCH}/ On 2014 Sep 19 (Fri) at 11:19:47 -0400 (-0400), Steve Litt wrote: :Hi all, : :I had the following procmail filter: : :0: :List-ID:.*misc.openbsd.org :.OpenBSD/ : :The preceding didn't put this list's email in maildir folder :OpenBSD. Just to make sure there was nothing wrong with the OpenBSD :folder, I changed it to a known good other folder, and still, mail from :this list went in my main inbox folder. : :So then I tried the following: : :0: :* ^(To|Cc).*misc.openbsd.org :.OpenBSD/ : :Same symptom: Mail from this list went to my main inbox, not to :OpenBSD. I'm stumped. : :Is this mailing list using some special kind of encoding that trips up :procmail? Have I somehow gotten my Procmail recipes wrong? Can anyone :think of *any* explanation or solution? : :Thanks, : :SteveT : :Steve Litt* http://www.troubleshooters.com/ :Troubleshooting Training * Human Performance : -- Waste not, get your budget cut next year.
Re: low power device
On 09/19/14 11:21, Andreas Bartelt wrote: I've just reflashed the 4/5/2014 version which is now called current production -- the same problem regarding re0. So yes, probably it's a flaky NIC. Taken together with the flaky mSATA drive of some APU.1c revisions and the unusually high operating temperature, I really can't recommend this device. On the other hand, there were a couple of positive reports regarding the APU.1c on misc@, so maybe I just had bad luck... Best regards Andreas Sounds like a hardware problem. The APU I use most has been running for nearly a month. It's running the following and I haven't had any problems with it. Yes, it does run warm. Anywhere from 58 to 62 C. OpenBSD 5.6 (GENERIC.MP) #314: Thu Jul 31 15:16:43 MDT 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error ffclock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time real mem = 2098511872 (2001MB) avail mem = 2033926144 (1939MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7e16d820 (7 entries) bios0: vendor coreboot version 4.0 date 07/08/2014 bios0: PC Engines APU # sysctl hw.sensors hw.sensors.km0.temp0=61.50 degC I have another APU with the latest BIOS and a Kingston 60GB msata SSD drive, but I haven't let it run for long periods of time to see how warm it gets. Stan
Sponsorship offer
Greetings, We're a magazine publishing free issues and online courses exclusively for BSD branches. I want to talk about becoming a paid sponsor of OpenBSD. We're willing to pay monthly. I'll be waiting for your answer so we can talk the details. Best Regards -- *Gurkan Mercan* Product Manager of BSD Magazine http://bsdmag.org/ *https://twitter.com/BSDmag https://twitter.com/BSDmag* *** This message and any attachments are confidential, understood as a business secret, and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, please telephone or e-mail the sender and delete this message and any attachment from your system. Also, if you are not the intended recipient you should not disclose the content or take / retain / distribute any copies. The content of the correspondence is directed exclusively to its addressee and may be disclosed to third parties only with the consent of the sender. Disclosure of the content of the correspondence without the consent of the sender will be a violation of the secrecy of correspondence and thus, personal property of Hakin9 Media Sp. z o. o. S.K. ***
Re: How to procmail sort misc@openbsd.org?
* On Fri Sep 19, 2014 at 11:19:47AM -0400 1251 , Steve Litt (sl...@troubleshooters.com) wrote: Hi all, I had the following procmail filter: 0: List-ID:.*misc.openbsd.org .OpenBSD/ The preceding didn't put this list's email in maildir folder OpenBSD. I have a very similar rule with two differences: I think the rule should start with :0, I am not sure that 0: is recognised, although :0: would be and would also lock the mailbox and prevent something else from writing too it at the same time. Also, I have * ^ infront of the List-ID: :0 * ^List-ID:.*misc.openbsd.org $MAILDIR/lists/obsd
Re: 4k graphics and openbsd
On Fri, Sep 19, 2014 at 6:07 PM, Jonathan Gray j...@jsg.id.au wrote: On Fri, Sep 19, 2014 at 02:22:49PM +0200, Tony Sarendal wrote: Good afternoon, Friday question: Does anyone have recommendation on graphics hardware to use for 4k screens and OpenBSD ? I'm thinking about improving my workstation. I run lots of terminal windows, a web browser, and the default window manager. As I like eye candy I may even do xsetroot -solid black. What I want is a stable work environment where I can reboot my workstation every 6 months or so. This with a 4k screen. Doable ? The short version is it won't work yet, the longer version is you should carefully check what the graphics hardware, monitor and software support. For Intel the HDMI 4k at 30 Hz modes are only supported on Haswell, ie i[357]-4xxx. On the AMD side HDMI 4k at 30 Hz modes are only supported on Southern Islands parts according to http://xorg.freedesktop.org/wiki/RadeonFeature/ which are Radeon HD = 77xx. The Southern Islands parts are best avoided as xf86-video-ati only supports 2D acceleration via Glamor-EGL which on Southern Islands radeons requires a Mesa driver that has a hard requirement on LLVM, working EGL drm platform, and other things. And the kernel only knows about the initial round of Southern Islands parts, not all of those that were later released including the newer integrated graphics with Kaveri. It seems it should be possible to use 4k modes with displayport on Northern Islands/HD6xxx if the screen was presented as two smaller screens via MST as Northern Islands radeons support displayport 1.2 and MST. This isn't an option for older Intel parts as ivybridge for example only supports displayport 1.1 with no MST. The HDMI 1.4 4k modes make use of a CEA vendor extension in the blob of data from the display that describes the modes (EDID). Support for that was added in drm 3.12. Many of the 4k displays present themselves as multiple displayport displays/streams, support for that was added in drm 3.17. OpenBSD has roughly drm 3.8.13.28 at the moment. hdmi 1.4, drm 3.12 3840x2160@30Hz 3840x2160@25Hz 3840x2160@24Hz hdmi 2.0 4k @ 60Hz, drm ? displayport 1.2 4k 30Hz single stream transport (SST), drm 3.12? displayport 1.2 4k 60Hz multi stream transport (MST), drm 3.17 displayport 1.? 4k 60Hz single stream transport (4K60 SST), drm ? displayport 1.? dell 5k 5120x2880@?, MST? drm ? Thanks for taking the time, Jonathan. Regards Tony