Re: Server room temperature sensors
On Wednesday, 06.02.2008 at 23:07 -0800, Joe wrote: | Can anyone recommend a server room temperature sensor that I can use | with openbsd? | | I want to monitor temperature and humidity. | | I hope to graph the data from the sensor. | | The sensor can be connected to my openbsd via usb, serial, or even | network. http://www.itwatchdogs.com/products_mon.shtml specifically, I have used the WeatherDuck -- best price, hooks directly to your machine via serial, and you can get text-based data straight out of it. All of their other devices have superflourous features, if you ask me, but many like the network-able products and SNMP support. later. ryanc
Story Writer Job !!
Work as a 'Story Writer' We are seeking for someone who can work as a 'Story Writer' in USA. This opportunity is widely open to anyone who has the knowlegde to write Stories. The successful candidate will need to have a computer with internet connnetion and have good communication skills someone who can write story. The job description involves writing Stories all with good Spelling, Grammar, Punctuation and Presentation for a magazine company. Applicants must have a good knowledge of writing stories. To apply please send your Application letter with CV/Resume to our email: [EMAIL PROTECTED] Polly Diaz Sante Magazine email: [EMAIL PROTECTED] Website: http://www.santemagazine.fr/
electronic safe for home,offices,hotels,institutes,........
Dear sir, we have entire range of security system including heavy safe, lockers, strong room doors, safety stick, metal detector,home security, cctv, .. Please visit the link below. Web site: http://armourelectronics.tradeindia.com http://www.armourindia.net Dealership inquiry solicited. Thanking you, Armour Electronics Pvt. Ltd. Ranjit Singh. Director. Postal address : Armour Electronics Pvt. Ltd. plot no. 3737, phase -4, behind new nirma, GIDC, Vatva, Ahmedabad, gujarat, india - 382445. Phone No. :-- 098250 37288 093750 37288 079-25842111 tele-fax - 091- 79-25840818 [demime 1.01d removed an attachment of type application/pdf which had a name of for homes and offices.pdf]
Re: Route-based VPN - Fortigate to OpenBSD
Thanks for the advice I will look into that should the gif option not work. Do you have any advice as to how to run gif over ipsec? -Chris Claer wrote: On Sat, Feb 09 2008 at 00:10, Chris Jones wrote: Hi all, Hi, A while back I attempted to setup a route-based VPN tunnel between a Fortigate firewall and an OpenBSD firewall with no success. I now have the need to get this to work and wondering if someone on the list can shed some light on the configuration. The end goal is to have a gif(4) interface run over IPSec so that I can use a dynamic routing protocol to route traffic to remote VPN networks. I can successfully create an IPSec VPN connection between the Fortigate and OpenBSD 4.2 system. Normally the tunnel interfaces on Fortigates and Netscreens are un-numbered. I have tried bringing up the gif interface after successfully establishing an IPSec connection by issuing the following commands. $ sudo ifconfig gif0 create $ sudo ifconfig gif0 tunnel 1.1.1.1 2.2.2.2 $ sudo ifconfig gif0 10.0.0.3 10.0.0.2 prefixlen 32 $ sudo route add -inet 10.2.0.0/16 10.0.0.2 I then modified the un-numbered tunnel interface on the Fortigate side to use src 10.0.0.2 dst 10.0.0.3. This didn't seem right to begin with as I already have an IPSec tunnel established. Where I'm confused is setting up gif to tunnel over the IPSec connection in order route traffic across it. Can someone point me in the right direction. Routed VPN in Netscreen and Fortinet is done by modifying the way ipsec should work. It's not the way to go if you want to take the vpn decision based on ip routes. I'd firstly try to create a GRE tunnel (numbered) between peers and then create a host to host vpn with GRE tunnel on top of it. Both OpenBSD and Netscreen support GRE, I hope Fortinet does. Claer My setup is quite simple. network --- internal externalexternal internal --- | - Internet - | --- 10.1.1.0/24 1.1.1.1 2.2.2.210.2.0.0/16 ipsec.conf -- remote_gw = 2.2.2.2 ike dynamic esp from 10.1.1.0/24 to 10.2.0.0/16 peer $remote_gw \ aggressive auth hmac-sha1 enc 3des group modp1536 \ quick auth hmac-sha1 enc 3des group modp1536 \ srcid [EMAIL PROTECTED] \ psk secret Thanks, -Chris -- Chris Jones -- Chris Jones GDI Software Services Canada Inc. Suite 1300, 1500 West Georgia St. Vancouver, BC, Canada V6G 2Z6 Email: [EMAIL PROTECTED] Mobile: 604.218.5981 Phone: 604.909.3300 | Fax: 604.909.0100
Java : Cafe Babe...
Hi,
I've go an AMD32 bit machine (dmesg at the bottom of the mail).
I compiled JDK 1.5 from the ports and am able to run complex Java
based applications like NetBeans.
I wrote a small test prog like the one below:
class helloWorld {
public static void main(String args[]) {
System.out.println(Hello World!);
}
}
Compiled it using javac and ran it using java.
It runs OK, but when I viewed it using od -x helloWorld.class | less
the first 8 bytes have been inverted, reminds me of the NUXI problem,
see below:
000 fecabeba31001d00000a0006090f
020 1000110000080a121300140000070715
040 160000013c066e697469013e03002928
060 015604006f43656400014c0f6e694e65
100 6d75656254726261656c00016d046961
120 016e16005b286a4c76612f61616c676e
140 532f72746e693b6756290001530a756f
Any ideas about why this is happening and how I could fix it?
dmesg below:
OpenBSD 4.2 (GENERIC) #1: Thu Feb 7 20:46:53 IST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor 3000+ (AuthenticAMD 686-class, 256KB
L2 cache) 1.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16
real mem = 469069824 (447MB)
avail mem = 445792256 (425MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/01/07, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xf06f0 (49 entries)
bios0: vendor American Megatrends Inc. version 0201date 05/01/2007
bios0: ASUSTeK Computer INC. M2N-MX SE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf/0x1
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7a40/256 (14 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x10de product 0x03e0
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc/0xee00 0xcf000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
NVIDIA MCP61 Memory rev 0xa1 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 NVIDIA MCP61 ISA rev 0xa2
nviic0 at pci0 dev 1 function 1 NVIDIA MCP61 SMBus rev 0xa2
iic0 at nviic0
iic1 at nviic0
NVIDIA MCP61 Memory rev 0xa2 at pci0 dev 1 function 2 not configured
ohci0 at pci0 dev 2 function 0 NVIDIA MCP61 USB rev 0xa2: irq 11,
version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 NVIDIA MPC61 USB rev 0xa2: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
ppb0 at pci0 dev 4 function 0 NVIDIA MCP61 rev 0xa1
pci1 at ppb0 bus 1
xl0 at pci1 dev 6 function 0 3Com 3c905C 100Base-TX rev 0x74: irq
11, address 00:50:da:0d:c9:90
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
azalia0 at pci0 dev 5 function 0 NVIDIA MCP61 HD Audio rev 0xa2: irq 11
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek/0x0662 (rev. 1.1), HDA version 1.0
audio0 at azalia0
pciide0 at pci0 dev 6 function 0 NVIDIA MCP61 IDE rev 0xa2: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: SONY, CD-RW CRX320EE, RYK4 SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
nfe0 at pci0 dev 7 function 0 NVIDIA MCP61 LAN rev 0xa2: irq 11,
address bb:58:90:fc:1b:00
ukphy0 at nfe0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x001374, model 0x0002
pciide1 at pci0 dev 8 function 0 NVIDIA MCP61 SATA rev 0xa2: DMA
pciide1: using irq 15 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: ST380215AS
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb1 at pci0 dev 9 function 0 NVIDIA MCP61 PCIE rev 0xa2
pci2 at ppb1 bus 2
ppb2 at pci0 dev 11 function 0 NVIDIA MCP61 PCIE rev 0xa2
pci3 at ppb2 bus 3
ppb3 at pci0 dev 12 function 0 NVIDIA MCP61 PCIE rev 0xa2
pci4 at ppb3 bus 4
vga1 at pci0 dev 13 function 0 NVIDIA GeForce 6100 nForce 430 rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 AMD AMD64 HyperTransport rev 0x00
pchb1 at pci0 dev 24 function 1 AMD AMD64 Address Map rev 0x00
pchb2 at pci0 dev 24 function 2 AMD AMD64 DRAM Cfg rev 0x00
pchb3 at pci0 dev 24 function 3 AMD AMD64 Misc Cfg rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
lpt0 at isa0
Re: ports.openbsd.nu
Edd Barrett vext01 at gmail.com writes: hey, what happened to ports.openbsd.nu?. The owner forgot to renew it and I can't reach him, so the site has moved to http://openports.se Regards Fredrik Carlsson
Where is NAN Defined?
I'm trying to compile a program that uses NAN. It includes math.h which I'm told C99 says should define it. I've grepped the entire source tree and read up on man 3 math and man 3 isinf. Still no joy. Trying to compile the program yields error: `NAN' undeclared (first use in this function). Can anyone point me in the right direction? Thanks, Jim
Re: Where is NAN Defined?
Jim Razmus wrote: I'm trying to compile a program that uses NAN. It includes math.h which I'm told C99 says should define it. I've grepped the entire source tree and read up on man 3 math and man 3 isinf. Still no joy. Trying to compile the program yields error: `NAN' undeclared (first use in this function). Can anyone point me in the right direction? you can use the isnan(3) function to test for NaN. Does that not work in your program?
Re: Where is NAN Defined?
On Feb 10, 2008 8:31 AM, Jim Razmus [EMAIL PROTECTED] wrote: I'm trying to compile a program that uses NAN. It includes math.h which I'm told C99 says should define it. I've grepped the entire source tree and read up on man 3 math and man 3 isinf. Still no joy. Trying to compile the program yields error: `NAN' undeclared (first use in this function). Can anyone point me in the right direction? #ifndef NAN #define NAN (0.0/0.0) #endif -- GDB has a 'break' feature; why doesn't it have 'fix' too?
Re: Where is NAN Defined?
On 2/10/08, Jim Razmus [EMAIL PROTECTED] wrote: I'm trying to compile a program that uses NAN. It includes math.h which I'm told C99 says should define it. I've grepped the entire source tree and read up on man 3 math and man 3 isinf. Still no joy. Trying to compile the program yields error: `NAN' undeclared (first use in this function). Can anyone point me in the right direction? Thanks, Jim Not OpenBSD related, but I was curious myself. Try reading http://en.wikipedia.org/wiki/NaN Or read isnan(3) if you just want to test is a number is NaN. (NaN != NaN) Floor
Re: Where is NAN Defined?
* Chris Kuethe [EMAIL PROTECTED] [080210 12:34]: On Feb 10, 2008 8:31 AM, Jim Razmus [EMAIL PROTECTED] wrote: I'm trying to compile a program that uses NAN. It includes math.h which I'm told C99 says should define it. I've grepped the entire source tree and read up on man 3 math and man 3 isinf. Still no joy. Trying to compile the program yields error: `NAN' undeclared (first use in this function). Can anyone point me in the right direction? #ifndef NAN #define NAN (0.0/0.0) #endif -- GDB has a 'break' feature; why doesn't it have 'fix' too? I'm told that math.h should do this for me. Moreover, I think NAN is a machine dependent value. Adding the line you mention would break on VAX (assuming I understand this correctly). Although I don't think anyone would run this program on a VAX, if it's in the ports tree there's the possibility. Worst case, I could add those defines though. Thanks. Jim
Re: Where is NAN Defined?
* Marc Balmer [EMAIL PROTECTED] [080210 12:06]: Jim Razmus wrote: I'm trying to compile a program that uses NAN. It includes math.h which I'm told C99 says should define it. I've grepped the entire source tree and read up on man 3 math and man 3 isinf. Still no joy. Trying to compile the program yields error: `NAN' undeclared (first use in this function). Can anyone point me in the right direction? you can use the isnan(3) function to test for NaN. Does that not work in your program? The isnan test is not the issue. The program actually sets a variable to the value NAN. It's those lines that gak the compiler. The lines that fail are: sp-t_req = NAN; sp-t_resp = NAN; and the error during compilation is: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -include config.h -DVARNISH_STATE_DIR='/usr/local/var/varnish' -g -O2 -MT varnishd-cache_center.o -MD -MP -MF .deps/varnishd-cache_center.Tpo -c -o varnishd-cache_center.o `test -f 'cache_center.c' || echo './'`cache_center.c cache_center.c: In function `cnt_done': cache_center.c:212: error: `NAN' undeclared (first use in this function) cache_center.c:212: error: (Each undeclared identifier is reported only once cache_center.c:212: error: for each function it appears in.) *** Error code 1 Hope that helps clear up my question. Jim
prng and a fix wich should (not?) happen..?
I would like to get the point of the developers related to the PRNG issue wich was discovered last year. Back then OpenBSD developers said OpenBSD is not affected but now I read a Slashdot-Article wich links to informations wich say the total opposite. http://it.slashdot.org/it/08/02/10/0136236.shtml leads to: http://readlist.com/lists/securityfocus.com/bugtraq/4/22004.html So could somebody finaly tell me what's the status about it? And please no oBSD rocks or OpenBSD sucks or We're l33t and unbreakable ubercoders talks. I think the informations provided are pretty omg and bad PR too :-/ OpenBSD's coordinator stated, in an email, that OpenBSD is completely uninterested in the problem and that the problem is completely irrelevant in the real world. So I would be happy about a technical explantation why so many (even BSD projects) think it's a problem but OpenBSD does not. Another omg comment: Interestingly enough, OpenBSD uses a flavor of this PRNG for another field, this time the IP fragmentation ID, part of the OpenBSD kernel network stack. The analysis carries out quite similarly to show that OpenBSD's IP ID is predictable as well, which gives way to O/S fingerprinting, idle-scanning, host alias detection, traffic analysis, and in some cases, even to TCP blind data injection. That doesn't sound like Theory but like a PoC wich lays arround somewhere Sebastian p.s. I hate registrations (even if I may have used fake data) so: http://www.trusteer.com/docs/DNS_Poisoning_paper.pdf
Re: Energy saving AMD 64 X2 EE CPU possible?
What version of OpenBSD is this ? Try -current with acpi enabled the powernow driver may be able to find the state data and you will have the opportunity to save some juice. gwk On Sat, Aug 25, 2007 at 09:35:38PM +0200, James Lepthien wrote: Hi, I run my OpenBSD 4.1-stable firewallsystem on a System which is way oversized for my needs. I want this system to consume as little power as possible so I need your advices. I started the apmd with the option -C but the apm output is the following: Battery state: unknown, 0% remaining, unknown life estimate A/C adapter state: not known Performance adjustment mode: cool running (2009 MHz) So the CPU is still running at full speed! Here is my dmesg output for the cpu: cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2009.58 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR, LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: apic clock running at 200MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2009.26 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative Can I do something about this or is this simply not supported? Is there anything more I can do to reduce power consumption of my system? Thanks in advance! James
Re: Server room temperature sensors
Joe wrote: Can anyone recommend a server room temperature sensor that I can use with openbsd? I want to monitor temperature and humidity. I hope to graph the data from the sensor. The sensor can be connected to my openbsd via usb, serial, or even network. I'm pretty happy with my overpriced and expensive Netbotz boxes from APC.. they do everything, and more, including email alarms, http works great from my blackberry. You can snmp query them if you want, or just trust that they'll alert you as appropriate. They don't so much work with OpenBSD as they work on their own and use smtp, http and snmp to talk to the world over Ethernet. However, the cheapest one was around $1500 when I picked them up, so it's by far not the cheapest way to do this. Paul
Re: Where is NAN Defined?
Jim Razmus wrote: * Chris Kuethe [EMAIL PROTECTED] [080210 12:34]: On Feb 10, 2008 8:31 AM, Jim Razmus [EMAIL PROTECTED] wrote: I'm trying to compile a program that uses NAN. It includes math.h which I'm told C99 says should define it. I've grepped the entire source tree and read up on man 3 math and man 3 isinf. Still no joy. Trying to compile the program yields error: `NAN' undeclared (first use in this function). Can anyone point me in the right direction? #ifndef NAN #define NAN (0.0/0.0) #endif -- GDB has a 'break' feature; why doesn't it have 'fix' too? I'm told that math.h should do this for me. Moreover, I think NAN is a machine dependent value. Adding the line you mention would break on VAX (assuming I understand this correctly). Although I don't think anyone would run this program on a VAX, if it's in the ports tree there's the possibility. Worst case, I could add those defines though. Thanks. Jim Have you tried using grep in the library tree to find it?
Re: Bluetooth on 4.2 (solved in -current)
On Thu, Jan 17, 2008 at 02:56:24PM -0800, Wim Lewis wrote: On Jan 14, 2008, at 7:24 AM, Uwe Stuehler wrote: On Sun, Jan 13, 2008 at 03:20:46AM +, Wim Lewis wrote: How much should I expect Bluetooth to be working on OBSD 4.2? I can get some things to work, but I can't successfully open an RFCOMM connecton. The ubt(4) driver was fixed in -current, -r1.10 of sys/dev/usb/ubt.c. Aha! Thank you, with that change pulled into -stable I can search/browse SDP info and make rfcomm connections to nearby devices. I notice that the sockets and interfaces used by Bluetooth don't show up in utilities like netstat and ifconfig. Is that the direction that Bluetooth support is heading? I think it would be a reasonable approach to treat bt like any other network interface (albeit one that doesn't carry IP), since bt is pretty network-like... I am not sure what direction OpenBSD will go WRT the bluetooth tools uwe@ and I imported the bluetooth stack from netbsd at c2k7 but I think we are in agreement that the userland interface is awful 4 uttilities to setup a serial connection is unacceptable, perhaps we can get something cleaner but it will be post 4.3. gwk
Re: Where is NAN Defined?
On Feb 10, 2008 12:55 PM, Jim Razmus [EMAIL PROTECTED] wrote: * Chris Kuethe [EMAIL PROTECTED] [080210 12:34]: On Feb 10, 2008 8:31 AM, Jim Razmus [EMAIL PROTECTED] wrote: I'm trying to compile a program that uses NAN. It includes math.h which I'm told C99 says should define it. I've grepped the entire source tree and read up on man 3 math and man 3 isinf. Still no joy. Trying to compile the program yields error: `NAN' undeclared (first use in this function). Can anyone point me in the right direction? #ifndef NAN #define NAN (0.0/0.0) #endif -- GDB has a 'break' feature; why doesn't it have 'fix' too? I'm told that math.h should do this for me. Moreover, I think NAN is a machine dependent value. Adding the line you mention would break on VAX (assuming I understand this correctly). Although I don't think anyone would run this program on a VAX, if it's in the ports tree there's the possibility. Worst case, I could add those defines though. Thanks. Jim Is your source familiar with OpenBSD? You say C99 math.h supposedly provides NAN. math(3) says nothing about C99. That's your first clue. Looking through gcc(1) for -std=c99 points to the GCC webpage [1]. It says additional math library functions are missing. That might be another clue. If you can't use NAN in a simple test program using -std=c99 and/or -lm, you're SOL unless you start patching your program. Both math(3) and the source for isnan(3) (see [2]) indicate that there are many potential NaN values. Unless you know exactly what this program is doing or are very familiar with your arch's floating point support, don't assume that #define will work 100% of the time. I'm no expert though. Good luck. --david [1] http://gcc.gnu.org/gcc-3.3/c99status.html [2] http://www.openbsd.org/cgi-bin/cvsweb/src/lib/libm/src/s_isnan.c
Re: Java : Cafe Babe...
On Feb 10, 2008 4:55 AM, Mayuresh Kathe [EMAIL PROTECTED] wrote: I've go an AMD32 bit machine (dmesg at the bottom of the mail). ... Compiled it using javac and ran it using java. It runs OK, but when I viewed it using od -x helloWorld.class | less the first 8 bytes have been inverted, reminds me of the NUXI problem, see below: 000 fecabeba31001d00000a0006090f To quote SUSv3's specification for od's -x option: The byte order used when interpreting numeric values is implementation-defined, but shall correspond to the order in which a constant of the corresponding type is stored in memory on the system. So, on AMD64, it's little-endian and the output you report is correct. If you want the hex values to be reported individually in the byte order of the file, use od -t xC. Any ideas about why this is happening and how I could fix it? Step 1: learn to question your assumptions... Philip Guenther
Re: Java : Cafe Babe...
On Feb 10, 2008 12:55 PM, Mayuresh Kathe [EMAIL PROTECTED] wrote: Compiled it using javac and ran it using java. It runs OK, but when I viewed it using od -x helloWorld.class | less the first 8 bytes have been inverted, reminds me of the NUXI problem, see below: 000 fecabeba31001d00000a0006090f Because your machine is little endian :P Now try on a sparc64 and see what happens. -- Best Regards Edd http://students.dec.bournemouth.ac.uk/ebarrett
sd0: not queuqued error 5
Is there anyone here that have the same problem with a dell 1950 box, I tried to run openbsd 4.2 with a stock kernel, and when i try to extract the ports.tgz on the box i get the following msg: sd0: not queuqued error 5 I've tried to run a stable kernel but with the same results. below is my dmesg: any help would be greatly appreciated. -b OpenBSD 4.2-stable (MX01) #0: Fri Feb 8 04:51:27 CST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/MX01 cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (GenuineIntel 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR real mem = 2146697216 (2047MB) avail mem = 2068189184 (1972MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0x7ffbc000 (62 entries) bios0: vendor Dell Inc. version 1.5.1 date 08/10/2007 bios0: Dell Inc. PowerEdge 1950 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfaa30/368 (21 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 6321ESB LPC rev 0x00) pcibios0: PCI bus #17 is the last bus bios0: ROM list: 0xc/0x9000! 0xc9000/0x1000 0xca000/0x1800 0xcb800/0x5200 0xec000/0x4000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 5000X Host rev 0x12 ppb0 at pci0 dev 2 function 0 Intel 5000 PCIE rev 0x12 pci1 at ppb0 bus 6 ppb1 at pci1 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci2 at ppb1 bus 7 ppb2 at pci2 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci3 at ppb2 bus 8 ppb3 at pci3 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci4 at ppb3 bus 9 bnx0 at pci4 dev 0 function 0 Broadcom BCM5708 rev 0x12: irq 11 ppb4 at pci2 dev 1 function 0 Intel 6321ESB PCIE rev 0x01 pci5 at ppb4 bus 10 ppb5 at pci1 dev 0 function 3 Intel 6321ESB PCIE-PCIX rev 0x01 pci6 at ppb5 bus 11 ppb6 at pci0 dev 3 function 0 Intel 5000 PCIE rev 0x12 pci7 at ppb6 bus 1 ppb7 at pci7 dev 0 function 0 Intel IOP333 PCIE-PCIX rev 0x00 pci8 at ppb7 bus 2 mfi0 at pci8 dev 14 function 0 Dell PERC 5 rev 0x00: irq 5 mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM scsibus0 at mfi0: 1 targets sd0 at scsibus0 targ 0 lun 0: DELL, PERC 5/i, 1.03 SCSI3 0/direct fixed sd0: 69376MB, 8844 cyl, 255 head, 63 sec, 512 bytes/sec, 142082048 sec total ppb8 at pci7 dev 0 function 2 Intel IOP333 PCIE-PCIX rev 0x00 pci9 at ppb8 bus 3 ppb9 at pci0 dev 4 function 0 Intel 5000 PCIE rev 0x12 pci10 at ppb9 bus 12 ppb10 at pci10 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci11 at ppb10 bus 13 ppb11 at pci0 dev 5 function 0 Intel 5000 PCIE rev 0x12 pci12 at ppb11 bus 14 ppb12 at pci0 dev 6 function 0 Intel 5000 PCIE rev 0x12 pci13 at ppb12 bus 15 ppb13 at pci0 dev 7 function 0 Intel 5000 PCIE rev 0x12 pci14 at ppb13 bus 16 pchb1 at pci0 dev 16 function 0 Intel 5000 Error Reporting rev 0x12 pchb2 at pci0 dev 16 function 1 Intel 5000 Error Reporting rev 0x12 pchb3 at pci0 dev 16 function 2 Intel 5000 Error Reporting rev 0x12 pchb4 at pci0 dev 17 function 0 Intel 5000 Reserved rev 0x12 pchb5 at pci0 dev 19 function 0 Intel 5000 Reserved rev 0x12 pchb6 at pci0 dev 21 function 0 Intel 5000 FBD rev 0x12 pchb7 at pci0 dev 22 function 0 Intel 5000 FBD rev 0x12 ppb14 at pci0 dev 28 function 0 Intel 6321ESB PCIE rev 0x09 pci15 at ppb14 bus 4 ppb15 at pci15 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci16 at ppb15 bus 5 bnx1 at pci16 dev 0 function 0 Broadcom BCM5708 rev 0x12: irq 11 uhci0 at pci0 dev 29 function 0 Intel 6321ESB USB rev 0x09: irq 11 uhci1 at pci0 dev 29 function 1 Intel 6321ESB USB rev 0x09: irq 10 uhci2 at pci0 dev 29 function 2 Intel 6321ESB USB rev 0x09: irq 11 ehci0 at pci0 dev 29 function 7 Intel 6321ESB USB rev 0x09: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 ppb16 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xd9 pci17 at ppb16 bus 17 vga1 at pci17 dev 13 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 Intel 6321ESB LPC rev 0x09: PM disabled pciide0 at pci0 dev 31 function 1 Intel 6321ESB IDE rev 0x09: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: TEAC, DVD-ROM DV28EV, D.AE SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) usb1 at uhci0: USB revision 1.0 uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd
Re: ports.openbsd.nu
Thank's a lot! This is good to know! Stefan Original-Nachricht Datum: Sun, 10 Feb 2008 14:07:23 + (UTC) Von: Fredrik Carlsson [EMAIL PROTECTED] An: misc@openbsd.org Betreff: Re: ports.openbsd.nu Edd Barrett vext01 at gmail.com writes: hey, what happened to ports.openbsd.nu?. The owner forgot to renew it and I can't reach him, so the site has moved to http://openports.se Regards Fredrik Carlsson
Re: sd0: not queuqued error 5
Hi, Beavis schrieb: Is there anyone here that have the same problem with a dell 1950 box, No, but with a PE 2950... Michael # dmesg OpenBSD 4.2-current (GENERIC.MP) #0: Sat Jan 26 14:05:52 CET 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (GenuineIntel 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR real mem = 3488874496 (3327MB) avail mem = 3385110528 (3228MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0xcffbc000 (62 entries) bios0: vendor Dell Inc. version 1.5.1 date 08/10/2007 bios0: Dell Inc. PowerEdge 2950 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 332 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (GenuineIntel 686-class) 2 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 ioapic1 at mainbus0: apid 3 pa 0xfec81000, version 20, 24 pins ioapic1: misconfigured as apic 0, remapped to apid 3 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (PEX2) acpiprt2 at acpi0: bus 7 (UPST) acpiprt3 at acpi0: bus 8 (DWN1) acpiprt4 at acpi0: bus 10 (DWN2) acpiprt5 at acpi0: bus 1 (PEX3) acpiprt6 at acpi0: bus 2 (PE2P) acpiprt7 at acpi0: bus 12 (PEX4) acpiprt8 at acpi0: bus 14 (PEX6) acpiprt9 at acpi0: bus 4 (SBEX) acpiprt10 at acpi0: bus 16 (COMP) acpicpu0 at acpi0 acpicpu1 at acpi0 bios0: ROM list: 0xc/0x9000! 0xc9000/0x5200 0xec000/0x4000! ipmi at mainbus0 not configured pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 5000X Host rev 0x12 ppb0 at pci0 dev 2 function 0 Intel 5000 PCIE rev 0x12 pci1 at ppb0 bus 6 ppb1 at pci1 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci2 at ppb1 bus 7 ppb2 at pci2 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci3 at ppb2 bus 8 ppb3 at pci3 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci4 at ppb3 bus 9 bnx0 at pci4 dev 0 function 0 Broadcom BCM5708 rev 0x12: apic 2 int 17 (irq 11) ppb4 at pci2 dev 1 function 0 Intel 6321ESB PCIE rev 0x01: apic 2 int 17 (irq 0) pci5 at ppb4 bus 10 ppb5 at pci1 dev 0 function 3 Intel 6321ESB PCIE-PCIX rev 0x01 pci6 at ppb5 bus 11 ppb6 at pci0 dev 3 function 0 Intel 5000 PCIE rev 0x12 pci7 at ppb6 bus 1 ppb7 at pci7 dev 0 function 0 Intel IOP333 PCIE-PCIX rev 0x00 pci8 at ppb7 bus 2 mfi0 at pci8 dev 14 function 0 Dell PERC 5 rev 0x00: apic 3 int 14 (irq 5) mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM scsibus0 at mfi0: 1 targets sd0 at scsibus0 targ 0 lun 0: DELL, PERC 5/i, 1.03 SCSI3 0/direct fixed sd0: 139392MB, 17769 cyl, 255 head, 63 sec, 512 bytes/sec, 285474816 sec total ppb8 at pci7 dev 0 function 2 Intel IOP333 PCIE-PCIX rev 0x00 pci9 at ppb8 bus 3 ppb9 at pci0 dev 4 function 0 Intel 5000 PCIE rev 0x12: apic 2 int 18 (irq 0) pci10 at ppb9 bus 12 ppb10 at pci0 dev 5 function 0 Intel 5000 PCIE rev 0x12 pci11 at ppb10 bus 13 ppb11 at pci0 dev 6 function 0 Intel 5000 PCIE rev 0x12: apic 2 int 19 (irq 0) pci12 at ppb11 bus 14 ppb12 at pci0 dev 7 function 0 Intel 5000 PCIE rev 0x12 pci13 at ppb12 bus 15 pchb1 at pci0 dev 16 function 0 Intel 5000 Error Reporting rev 0x12 pchb2 at pci0 dev 16 function 1 Intel 5000 Error Reporting rev 0x12 pchb3 at pci0 dev 16 function 2 Intel 5000 Error Reporting rev 0x12 pchb4 at pci0 dev 17 function 0 Intel 5000 Reserved rev 0x12 pchb5 at pci0 dev 19 function 0 Intel 5000 Reserved rev 0x12 pchb6 at pci0 dev 21 function 0 Intel 5000 FBD rev 0x12 pchb7 at pci0 dev 22 function 0 Intel 5000 FBD rev 0x12 ppb13 at pci0 dev 28 function 0 Intel 6321ESB PCIE rev 0x09 pci14 at ppb13 bus 4 ppb14 at pci14 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci15 at ppb14 bus 5 bnx1 at pci15 dev 0 function 0 Broadcom BCM5708 rev 0x12: apic 2 int 16 (irq 11) uhci0 at pci0 dev 29 function 0 Intel 6321ESB USB rev 0x09: apic 2 int 21 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 6321ESB USB rev 0x09: apic 2 int 20 (irq 10) uhci2 at pci0 dev 29 function 2 Intel 6321ESB USB rev 0x09: apic 2 int 21 (irq 11) ehci0 at pci0 dev 29 function 7 Intel 6321ESB USB rev 0x09: apic 2 int 21 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb15 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xd9 pci16 at ppb15 bus 16 vga1 at pci16 dev 13 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added
Suggestion for ipsec.conf(5)
In the [manual flows] section of the ipsec.conf man page, the [type modifier] parameter doesn't explain require, use, acquire and dontacq modifiers. The explanation from the old ipsecadm(8) should be use: A use flow, specify that packets matching this flow should try to use IPsec if possible. A acquire For flow specify that packets matching this flow should try to use IPsec and establish SAs dynamically if possible, but permit unencrypted traffic. A require flow specify that packets matching this flow must use IPsec, and establish SAs dynamically as needed. If no SAs are established, traffic is not allowed through. A dontacq flow specify that packets matching this flow must use IPsec. If such SAs are not present, simply drop the packets. Such a policy may be used to demand peers establish SAs before they can communicate with us, without going through the burden of initiating the SA ourselves (thus allowing for some denial of service attacks). This flow type is particularly suitable for security gateways. Aurilien.
Re: prng and a fix wich should (not?) happen..?
You saw the official status. Increased public attention rarely changes a technical opinion around here. Reading the bugtraq link indicates that in other OSes, the default sysctl disables the PRNG, resulting in a sequential IP ID counter. Anyone with half a brain can see that sequential is infinitely worse than a weak PRNG. I didn't look up the others, but FreeBSD CVS indicates that their fixed PRNG is still not enabled by default. How's that for security? Also, I thought BIND 9 had its own PRNG flaws, which is what prompted OpenBSD to provide their own in the first place. What algorithm is BIND 9 currently using? At any rate, OpenBSD developers likely believe (or know from firsthand experience) that there are already satisfactory measures that can be taken by concerned admins to secure DNS or other traffic. If superior methods are already available and improving this PRNG has minimal overall benefit, it is therefore uninteresting and of low priority. Note that this does not preclude it from ever being fixed. If you are that concerned about the issue, you are certainly welcome to patch and compile it yourself. IIRC, the fields affected by this PRNG flaw were originally intended to be sequential counters, and therefore must be monotonic. Simply swapping in a more random PRNG doesn't necessarily come without repercussions. OpenBSD developers may be waiting for real-world evidence or independent research indicating that the new PRNG causes a minimum of compatibility problems, is cryptographically better than the old one, and has suitable performance characteristics. Just my unsolicited take on the situation... --david On Feb 10, 2008 1:41 PM, [EMAIL PROTECTED] wrote: I would like to get the point of the developers related to the PRNG issue wich was discovered last year. Back then OpenBSD developers said OpenBSD is not affected but now I read a Slashdot-Article wich links to informations wich say the total opposite. http://it.slashdot.org/it/08/02/10/0136236.shtml leads to: http://readlist.com/lists/securityfocus.com/bugtraq/4/22004.html So could somebody finaly tell me what's the status about it? And please no oBSD rocks or OpenBSD sucks or We're l33t and unbreakable ubercoders talks. I think the informations provided are pretty omg and bad PR too :-/ OpenBSD's coordinator stated, in an email, that OpenBSD is completely uninterested in the problem and that the problem is completely irrelevant in the real world. So I would be happy about a technical explantation why so many (even BSD projects) think it's a problem but OpenBSD does not. Another omg comment: Interestingly enough, OpenBSD uses a flavor of this PRNG for another field, this time the IP fragmentation ID, part of the OpenBSD kernel network stack. The analysis carries out quite similarly to show that OpenBSD's IP ID is predictable as well, which gives way to O/S fingerprinting, idle-scanning, host alias detection, traffic analysis, and in some cases, even to TCP blind data injection. That doesn't sound like Theory but like a PoC wich lays arround somewhere Sebastian p.s. I hate registrations (even if I may have used fake data) so: http://www.trusteer.com/docs/DNS_Poisoning_paper.pdf
Serial port (RS232) on USB port
Hello, I want add one or several serial / rs232 connectors on a OpenBSD box (Soekris or standard PC) - without adding a PCI card - just converter. I search compatibles products. When we buy product we don't know the chip. Do you have good experiences ? I have an converter, here an excerpt dmesg and usbdevs : uftdi0 at uhub0 port 2 uftdi0: FTDI FT232R USB UART, rev 2.00/6.00, addr 3 ucom0 at uftdi0 portno 1 # usbdevs -dv Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x), Intel(0x8086), rev 1.00 uhub0 port 1 addr 2: low speed, power 100 mA, config 1, NetScroll(0x0035), Genius(0x0458), rev 1.10 uhidev0 port 2 addr 3: full speed, power 90 mA, config 1, FT232R USB UART(0x6001), FTDI(0x0403), rev 6.00 uftdi0 - I think tJhe FT232R USB UART is the /dev/ttyU0 device. But I can't talk witj it (in or out). # stty -f /dev/ttyU0 ispeed 0 baud; ospeed 9600 baud; lflags: echoe echoke echoctl cflags: cs8 -parenb Any ideas ? On another box I was using tip for receiving caracters. Xavier.
Re: Where is NAN Defined?
On Sun, 10 Feb 2008, Jim Razmus wrote:
I'm told that math.h should do this for me. Moreover, I think NAN is a
machine dependent value.
See /usr/include/i386/ieee.h for some hints.
Adding the line you mention would break on VAX (assuming I understand
this correctly). Although I don't think anyone would run this program
on a VAX, if it's in the ports tree there's the possibility.
Probably. Vaxes didn't use IEEE floating point.
Worst case, I could add those defines though.
I'd do some more research. Examine the source code for isnan()
This is the i386 version
#include sys/types.h
#include machine/ieee.h
#include math.h
int
isnan(d)
double d;
{
struct ieee_double *p = (struct ieee_double *)d;
return (p-dbl_exp == DBL_EXP_INFNAN
(p-dbl_frach != 0 || p-dbl_fracl != 0));
}
We notice the || in the comparison. There is more than one NaN,
in other words. DBL_EXP_INFNAN is defined in ieee.h
So there is no unique NaN.
Dave
--
The president of the United States is the commander-in-chief of
the armed forces. He is not the commander-in-chief of the
government, nor is he the commander-in-chief of the country.
Re: sd0: not queuqued error 5
is there any way to get around this? with -current? or is the same deal? I'm currently checking out dell for some firmware update. I'll inform the list as soon as i've applied the updates and the issue is fixed. -b On Feb 10, 2008 3:02 PM, Michael [EMAIL PROTECTED] wrote: Hi, Beavis schrieb: Is there anyone here that have the same problem with a dell 1950 box, No, but with an PE 2950... Michael # dmesg OpenBSD 4.2-current (GENERIC.MP) #0: Sat Jan 26 14:05:52 CET 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (GenuineIntel 686-class) 2 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR real mem = 3488874496 (3327MB) avail mem = 3385110528 (3228MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0xcffbc000 (62 entries) bios0: vendor Dell Inc. version 1.5.1 date 08/10/2007 bios0: Dell Inc. PowerEdge 2950 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 332 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (GenuineIntel 686-class) 2 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 ioapic1 at mainbus0: apid 3 pa 0xfec81000, version 20, 24 pins ioapic1: misconfigured as apic 0, remapped to apid 3 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (PEX2) acpiprt2 at acpi0: bus 7 (UPST) acpiprt3 at acpi0: bus 8 (DWN1) acpiprt4 at acpi0: bus 10 (DWN2) acpiprt5 at acpi0: bus 1 (PEX3) acpiprt6 at acpi0: bus 2 (PE2P) acpiprt7 at acpi0: bus 12 (PEX4) acpiprt8 at acpi0: bus 14 (PEX6) acpiprt9 at acpi0: bus 4 (SBEX) acpiprt10 at acpi0: bus 16 (COMP) acpicpu0 at acpi0 acpicpu1 at acpi0 bios0: ROM list: 0xc/0x9000! 0xc9000/0x5200 0xec000/0x4000! ipmi at mainbus0 not configured pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 5000X Host rev 0x12 ppb0 at pci0 dev 2 function 0 Intel 5000 PCIE rev 0x12 pci1 at ppb0 bus 6 ppb1 at pci1 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci2 at ppb1 bus 7 ppb2 at pci2 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci3 at ppb2 bus 8 ppb3 at pci3 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci4 at ppb3 bus 9 bnx0 at pci4 dev 0 function 0 Broadcom BCM5708 rev 0x12: apic 2 int 17 (irq 11) ppb4 at pci2 dev 1 function 0 Intel 6321ESB PCIE rev 0x01: apic 2 int 17 (irq 0) pci5 at ppb4 bus 10 ppb5 at pci1 dev 0 function 3 Intel 6321ESB PCIE-PCIX rev 0x01 pci6 at ppb5 bus 11 ppb6 at pci0 dev 3 function 0 Intel 5000 PCIE rev 0x12 pci7 at ppb6 bus 1 ppb7 at pci7 dev 0 function 0 Intel IOP333 PCIE-PCIX rev 0x00 pci8 at ppb7 bus 2 mfi0 at pci8 dev 14 function 0 Dell PERC 5 rev 0x00: apic 3 int 14 (irq 5) mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM scsibus0 at mfi0: 1 targets sd0 at scsibus0 targ 0 lun 0: DELL, PERC 5/i, 1.03 SCSI3 0/direct fixed sd0: 139392MB, 17769 cyl, 255 head, 63 sec, 512 bytes/sec, 285474816 sec total ppb8 at pci7 dev 0 function 2 Intel IOP333 PCIE-PCIX rev 0x00 pci9 at ppb8 bus 3 ppb9 at pci0 dev 4 function 0 Intel 5000 PCIE rev 0x12: apic 2 int 18 (irq 0) pci10 at ppb9 bus 12 ppb10 at pci0 dev 5 function 0 Intel 5000 PCIE rev 0x12 pci11 at ppb10 bus 13 ppb11 at pci0 dev 6 function 0 Intel 5000 PCIE rev 0x12: apic 2 int 19 (irq 0) pci12 at ppb11 bus 14 ppb12 at pci0 dev 7 function 0 Intel 5000 PCIE rev 0x12 pci13 at ppb12 bus 15 pchb1 at pci0 dev 16 function 0 Intel 5000 Error Reporting rev 0x12 pchb2 at pci0 dev 16 function 1 Intel 5000 Error Reporting rev 0x12 pchb3 at pci0 dev 16 function 2 Intel 5000 Error Reporting rev 0x12 pchb4 at pci0 dev 17 function 0 Intel 5000 Reserved rev 0x12 pchb5 at pci0 dev 19 function 0 Intel 5000 Reserved rev 0x12 pchb6 at pci0 dev 21 function 0 Intel 5000 FBD rev 0x12 pchb7 at pci0 dev 22 function 0 Intel 5000 FBD rev 0x12 ppb13 at pci0 dev 28 function 0 Intel 6321ESB PCIE rev 0x09 pci14 at ppb13 bus 4 ppb14 at pci14 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci15 at ppb14 bus 5 bnx1 at pci15 dev 0 function 0 Broadcom BCM5708 rev 0x12: apic 2 int 16 (irq 11) uhci0 at pci0 dev 29 function 0 Intel 6321ESB USB rev 0x09: apic 2 int 21 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 6321ESB USB rev 0x09: apic 2 int 20 (irq 10) uhci2 at pci0 dev 29 function 2 Intel 6321ESB USB rev 0x09: apic 2 int 21 (irq 11) ehci0 at
Re: sd0: not queuqued error 5
This error has all the makings of a firmware issue. I never saw this when I tested the 1.0 firmware but have seen reports of this in the newer versions. Please do upgrade and share your results. If it still fails I'll consider trying to reboot the firmware and see what that does. On Feb 10, 2008, at 3:44 PM, Beavis [EMAIL PROTECTED] wrote: is there any way to get around this? with -current? or is the same deal? I'm currently checking out dell for some firmware update. I'll inform the list as soon as i've applied the updates and the issue is fixed. -b On Feb 10, 2008 3:02 PM, Michael [EMAIL PROTECTED] wrote: Hi, Beavis schrieb: Is there anyone here that have the same problem with a dell 1950 box, No, but with an PE 2950... Michael # dmesg OpenBSD 4.2-current (GENERIC.MP) #0: Sat Jan 26 14:05:52 CET 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (GenuineIntel 686- class) 2 GHz cpu0: FPU, V86, DE, PSE, TSC, MSR, PAE, MCE, CX8, APIC, SEP, MTRR, PGE, MCA, CMOV, PAT, PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- CPL,VMX,TM2,CX16,xTPR real mem = 3488874496 (3327MB) avail mem = 3385110528 (3228MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0xcffbc000 (62 entries) bios0: vendor Dell Inc. version 1.5.1 date 08/10/2007 bios0: Dell Inc. PowerEdge 2950 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 332 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (GenuineIntel 686- class) 2 GHz cpu1: FPU, V86, DE, PSE, TSC, MSR, PAE, MCE, CX8, APIC, SEP, MTRR, PGE, MCA, CMOV, PAT, PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- CPL,VMX,TM2,CX16,xTPR ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 ioapic1 at mainbus0: apid 3 pa 0xfec81000, version 20, 24 pins ioapic1: misconfigured as apic 0, remapped to apid 3 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (PEX2) acpiprt2 at acpi0: bus 7 (UPST) acpiprt3 at acpi0: bus 8 (DWN1) acpiprt4 at acpi0: bus 10 (DWN2) acpiprt5 at acpi0: bus 1 (PEX3) acpiprt6 at acpi0: bus 2 (PE2P) acpiprt7 at acpi0: bus 12 (PEX4) acpiprt8 at acpi0: bus 14 (PEX6) acpiprt9 at acpi0: bus 4 (SBEX) acpiprt10 at acpi0: bus 16 (COMP) acpicpu0 at acpi0 acpicpu1 at acpi0 bios0: ROM list: 0xc/0x9000! 0xc9000/0x5200 0xec000/0x4000! ipmi at mainbus0 not configured pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 5000X Host rev 0x12 ppb0 at pci0 dev 2 function 0 Intel 5000 PCIE rev 0x12 pci1 at ppb0 bus 6 ppb1 at pci1 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci2 at ppb1 bus 7 ppb2 at pci2 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci3 at ppb2 bus 8 ppb3 at pci3 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci4 at ppb3 bus 9 bnx0 at pci4 dev 0 function 0 Broadcom BCM5708 rev 0x12: apic 2 int 17 (irq 11) ppb4 at pci2 dev 1 function 0 Intel 6321ESB PCIE rev 0x01: apic 2 int 17 (irq 0) pci5 at ppb4 bus 10 ppb5 at pci1 dev 0 function 3 Intel 6321ESB PCIE-PCIX rev 0x01 pci6 at ppb5 bus 11 ppb6 at pci0 dev 3 function 0 Intel 5000 PCIE rev 0x12 pci7 at ppb6 bus 1 ppb7 at pci7 dev 0 function 0 Intel IOP333 PCIE-PCIX rev 0x00 pci8 at ppb7 bus 2 mfi0 at pci8 dev 14 function 0 Dell PERC 5 rev 0x00: apic 3 int 14 (irq 5) mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM scsibus0 at mfi0: 1 targets sd0 at scsibus0 targ 0 lun 0: DELL, PERC 5/i, 1.03 SCSI3 0/direct fixed sd0: 139392MB, 17769 cyl, 255 head, 63 sec, 512 bytes/sec, 285474816 sec total ppb8 at pci7 dev 0 function 2 Intel IOP333 PCIE-PCIX rev 0x00 pci9 at ppb8 bus 3 ppb9 at pci0 dev 4 function 0 Intel 5000 PCIE rev 0x12: apic 2 int 18 (irq 0) pci10 at ppb9 bus 12 ppb10 at pci0 dev 5 function 0 Intel 5000 PCIE rev 0x12 pci11 at ppb10 bus 13 ppb11 at pci0 dev 6 function 0 Intel 5000 PCIE rev 0x12: apic 2 int 19 (irq 0) pci12 at ppb11 bus 14 ppb12 at pci0 dev 7 function 0 Intel 5000 PCIE rev 0x12 pci13 at ppb12 bus 15 pchb1 at pci0 dev 16 function 0 Intel 5000 Error Reporting rev 0x12 pchb2 at pci0 dev 16 function 1 Intel 5000 Error Reporting rev 0x12 pchb3 at pci0 dev 16 function 2 Intel 5000 Error Reporting rev 0x12 pchb4 at pci0 dev 17 function 0 Intel 5000 Reserved rev 0x12 pchb5 at pci0 dev 19 function 0 Intel 5000 Reserved rev 0x12 pchb6 at pci0 dev 21 function 0 Intel 5000 FBD rev 0x12 pchb7 at pci0 dev 22 function 0 Intel 5000 FBD rev 0x12 ppb13 at pci0 dev 28 function 0 Intel 6321ESB PCIE rev 0x09 pci14 at ppb13 bus 4 ppb14 at pci14 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci15 at ppb14
Re: mipsel / Broadcom-based routers
Stuart Henderson wrote: On 2008/02/01 13:01, Lucas Yamanishi wrote: Does anybody know of any active projects to port OpenBSD to 32-bit little endian MIPS architecture? Rainer Giedat talked about his port (work-in-progress) at OpenCon. Thanks. I ran his name through Google and I'm getting a lot more now. I had no idea the ISA was so different.
Re: prng and a fix wich should (not?) happen..?
David Higgs [EMAIL PROTECTED] writes: At any rate, OpenBSD developers likely believe (or know from firsthand experience) that there are already satisfactory measures that can be taken by concerned admins to secure DNS or other traffic. My very superficial reading of the paper left me with the impression that actually capturing enough data to successfully inject the desired bad (or 'crafted') data would take on the order of several thousand DNS queries *and* the successful calculation of the data to be inserted with a matching checksum during something like a 90 second window of opportunity. Feel free to correct my impression, but if it's even approximately right, there *are* better ways to deal with kiddies who try this particular attack, several well known with the somewhat desirable property that they are actually good for a number of other things too. -- Peter N. M. Hansteen, member of the first RFC 1149 implementation team http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/ Remember to set the evil bit on all malicious network traffic delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
Re: Where is NAN Defined?
There's some newer stuff we don't have yet. Partly because of vax, since it's the only non-ieee platform we support. NAN is one of these issues, and not the only one. For now, just cater around the problem by reading carefully the code, and figuring out what you can put instead of NAN.
Re: sd0: not queuqued error 5
On February 10, 2008 04:19:52 pm Marco Peereboom wrote: This error has all the makings of a firmware issue. I never saw this when I tested the 1.0 firmware but have seen reports of this in the newer versions. Please do upgrade and share your results. If it still fails I'll consider trying to reboot the firmware and see what that does. Thanks very much. We had this error on two Dell 2950's recently. The error was observed roughly 12 hours apart. Both are mail servers running OpenBSD 4.2 and had been up for close to 60 days when we saw the error (sd0 not queued error 5). Also, while the error was happening we were getting a lot of NDR's because one user had set up forwarding to the wrong address before taking off on his vacation. I don't know whether that contributed to this error in some way. Going through all the messages over the past two years on this topic, to me it looks like the problem occurs only on heavily loaded servers that have been up for a few months or on systems that have a lot of writes and the disks are mirrored. Is this a valid observation? Hopefully I am not jumping to conclusions here. Here is the dmesg after we did a power reset. We have not seen any problems for the past 15 days. Since we have not had any other problems, we were going to leave it running for a month or so, update the firmware on the backup server and see if the problem reappears. I will update the list if we have the problem again. If there is any additional information that would be useful or if there is anything else I can do on the backup server, please let me know. SERVER 1 (main server) OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- CPL,VMX,TM2,CX16,xTPR real mem = 1072955392 (1023MB) avail mem = 1029857280 (982MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0x3ffbc000 (62 entries) bios0: vendor Dell Inc. version 1.5.1 date 08/10/2007 bios0: Dell Inc. PowerEdge 2950 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfaa30/384 (22 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 6321ESB LPC rev 0x00) pcibios0: PCI bus #16 is the last bus bios0: ROM list: 0xc/0x9000! 0xc9000/0x5200 0xce800/0x1000! 0xec000/0x4000! acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG acpitimer at acpi0 not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (PEX2) acpiprt2 at acpi0: bus 7 (UPST) acpiprt3 at acpi0: bus 8 (DWN1) acpiprt4 at acpi0: bus 10 (DWN2) acpiprt5 at acpi0: bus -1 (PE2X) acpiprt6 at acpi0: bus 1 (PEX3) acpiprt7 at acpi0: bus 2 (PE2P) acpiprt8 at acpi0: bus 12 (PEX4) acpiprt9 at acpi0: bus -1 (PE2P) acpiprt10 at acpi0: bus -1 (PEX5) acpiprt11 at acpi0: bus 0 (PE2P) acpiprt12 at acpi0: bus 14 (PEX6) acpiprt13 at acpi0: bus -1 (PXHA) acpiprt14 at acpi0: bus -1 (PXHB) acpiprt15 at acpi0: bus 4 (SBEX) acpiprt16 at acpi0: bus 16 (COMP) acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 5000X Host rev 0x12 ppb0 at pci0 dev 2 function 0 Intel 5000 PCIE rev 0x12 pci1 at ppb0 bus 6 ppb1 at pci1 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci2 at ppb1 bus 7 ppb2 at pci2 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci3 at ppb2 bus 8 ppb3 at pci3 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci4 at ppb3 bus 9 bnx0 at pci4 dev 0 function 0 Broadcom BCM5708 rev 0x12: irq 10 ppb4 at pci2 dev 1 function 0 Intel 6321ESB PCIE rev 0x01 pci5 at ppb4 bus 10 ppb5 at pci1 dev 0 function 3 Intel 6321ESB PCIE-PCIX rev 0x01 pci6 at ppb5 bus 11 ppb6 at pci0 dev 3 function 0 Intel 5000 PCIE rev 0x12 pci7 at ppb6 bus 1 ppb7 at pci7 dev 0 function 0 Intel IOP333 PCIE-PCIX rev 0x00 pci8 at ppb7 bus 2 mfi0 at pci8 dev 14 function 0 Dell PERC 5 rev 0x00: irq 11 mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM scsibus0 at mfi0: 1 targets sd0 at scsibus0 targ 0 lun 0: DELL, PERC 5/i, 1.03 SCSI3 0/direct fixed sd0: 139392MB, 17769 cyl, 255 head, 63 sec, 512 bytes/sec, 285474816 sec total ppb8 at pci7 dev 0 function 2 Intel IOP333 PCIE-PCIX rev 0x00 pci9 at ppb8 bus 3 ppb9 at pci0 dev 4 function 0 Intel 5000 PCIE rev 0x12 pci10 at ppb9 bus 12 ppb10 at pci0 dev 5 function 0 Intel 5000 PCIE rev 0x12 pci11 at ppb10 bus 13 ppb11 at pci0 dev 6 function 0 Intel 5000 PCIE rev 0x12 pci12 at ppb11 bus 14 ppb12
Re: sd0: not queuqued error 5
I think it is some sort of race and we end up hanging the firmware. Like I said I have never seen it myself but that is how it feels like. Also tracing the code and that particular error there is not much else that could be wrong. Let me think about this for a few days. On Sun, Feb 10, 2008 at 05:37:21PM -0600, Vijay Sankar wrote: On February 10, 2008 04:19:52 pm Marco Peereboom wrote: This error has all the makings of a firmware issue. I never saw this when I tested the 1.0 firmware but have seen reports of this in the newer versions. Please do upgrade and share your results. If it still fails I'll consider trying to reboot the firmware and see what that does. Thanks very much. We had this error on two Dell 2950's recently. The error was observed roughly 12 hours apart. Both are mail servers running OpenBSD 4.2 and had been up for close to 60 days when we saw the error (sd0 not queued error 5). Also, while the error was happening we were getting a lot of NDR's because one user had set up forwarding to the wrong address before taking off on his vacation. I don't know whether that contributed to this error in some way. Going through all the messages over the past two years on this topic, to me it looks like the problem occurs only on heavily loaded servers that have been up for a few months or on systems that have a lot of writes and the disks are mirrored. Is this a valid observation? Hopefully I am not jumping to conclusions here. Here is the dmesg after we did a power reset. We have not seen any problems for the past 15 days. Since we have not had any other problems, we were going to leave it running for a month or so, update the firmware on the backup server and see if the problem reappears. I will update the list if we have the problem again. If there is any additional information that would be useful or if there is anything else I can do on the backup server, please let me know. SERVER 1 (main server) OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- CPL,VMX,TM2,CX16,xTPR real mem = 1072955392 (1023MB) avail mem = 1029857280 (982MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0x3ffbc000 (62 entries) bios0: vendor Dell Inc. version 1.5.1 date 08/10/2007 bios0: Dell Inc. PowerEdge 2950 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfaa30/384 (22 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 6321ESB LPC rev 0x00) pcibios0: PCI bus #16 is the last bus bios0: ROM list: 0xc/0x9000! 0xc9000/0x5200 0xce800/0x1000! 0xec000/0x4000! acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG acpitimer at acpi0 not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 6 (PEX2) acpiprt2 at acpi0: bus 7 (UPST) acpiprt3 at acpi0: bus 8 (DWN1) acpiprt4 at acpi0: bus 10 (DWN2) acpiprt5 at acpi0: bus -1 (PE2X) acpiprt6 at acpi0: bus 1 (PEX3) acpiprt7 at acpi0: bus 2 (PE2P) acpiprt8 at acpi0: bus 12 (PEX4) acpiprt9 at acpi0: bus -1 (PE2P) acpiprt10 at acpi0: bus -1 (PEX5) acpiprt11 at acpi0: bus 0 (PE2P) acpiprt12 at acpi0: bus 14 (PEX6) acpiprt13 at acpi0: bus -1 (PXHA) acpiprt14 at acpi0: bus -1 (PXHB) acpiprt15 at acpi0: bus 4 (SBEX) acpiprt16 at acpi0: bus 16 (COMP) acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 5000X Host rev 0x12 ppb0 at pci0 dev 2 function 0 Intel 5000 PCIE rev 0x12 pci1 at ppb0 bus 6 ppb1 at pci1 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci2 at ppb1 bus 7 ppb2 at pci2 dev 0 function 0 Intel 6321ESB PCIE rev 0x01 pci3 at ppb2 bus 8 ppb3 at pci3 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci4 at ppb3 bus 9 bnx0 at pci4 dev 0 function 0 Broadcom BCM5708 rev 0x12: irq 10 ppb4 at pci2 dev 1 function 0 Intel 6321ESB PCIE rev 0x01 pci5 at ppb4 bus 10 ppb5 at pci1 dev 0 function 3 Intel 6321ESB PCIE-PCIX rev 0x01 pci6 at ppb5 bus 11 ppb6 at pci0 dev 3 function 0 Intel 5000 PCIE rev 0x12 pci7 at ppb6 bus 1 ppb7 at pci7 dev 0 function 0 Intel IOP333 PCIE-PCIX rev 0x00 pci8 at ppb7 bus 2 mfi0 at pci8 dev 14 function 0 Dell PERC 5 rev 0x00: irq 11 mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM scsibus0 at mfi0: 1 targets sd0 at scsibus0 targ 0 lun
Re:
Unix Fan wrote: Apologies for not stating the obvious.. because everyone watches DVD's on m68k.. right? Nick Holland does, I think.
Re: running mail server at home
On 07/02/2008, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: FYI, masquerading is a LINUX shit but openbsd rules with its PF power. FYI, masquerading is a generic term and a synonym for NATing, and not an invitation to diss Linux.
Re: sd0: not queuqued error 5
Hi, Marco Peereboom schrieb: I think it is some sort of race and we end up hanging the firmware. Like I said I have never seen it myself but that is how it feels like. Also tracing the code and that particular error there is not much else that could be wrong. Let me think about this for a few days. Thanks a lot, I was able to force that error by just deleting (rm -rP) ~50 GB of files (~300 MB / each) which I created before ... the system hung before all files could be deleted. Michael
Re: Server room temperature sensors
On Wed, 6 Feb 2008 23:07:01 -0800 Joe [EMAIL PROTECTED] spake: Can anyone recommend a server room temperature sensor that I can use with openbsd? I want to monitor temperature and humidity. I hope to graph the data from the sensor. The sensor can be connected to my openbsd via usb, serial, or even network. I've used AVTECH in a few of my rooms. I think the cheapest is around $240 maybe... bigger models can handle everything from smoke, to noise, etc... Read them via SNMP tied to nagios. Works good, the basic model comes with a temp sensor in the unit and a 25' (I believe) lead to a remote sensor. I also have some NetBotz, and while expensive are pretty cool - airflow, noise, temp, humidity, door sensor, camera, etc... Nice if your not spending out of pocket eh...
