Re: [Nuke-users] Prosumer Lidar ?
I'm late to the party but.. The Sense from Cubify is shit. It's not even close to prosumer / consumer level. Check Ben Hecks podcast to see how finicky it is. http://www.youtube.com/watch?v=TLFonu92Wn4 disclaimer: I have one, was part of a package deal, would never buy one on it's own. On Mon, Jun 30, 2014 at 2:56 PM, Chris Noellert cnoell...@gmail.com wrote: Photoscan. Horrible learning materials and interface but it does what it says on the tin and surprisingly well. Best, Chris Sent from my iPhone On Jun 30, 2014, at 6:52 PM, Michael Garrett michaeld...@gmail.com wrote: Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/
Re: [Nuke-users] Prosumer Lidar ?
Agisoft. Cubify is crap. Is crappier than the Kinect. On Sat, Jul 12, 2014 at 12:39 AM, Aruna Inversin inver...@d2.com wrote: I'm late to the party but.. The Sense from Cubify is shit. It's not even close to prosumer / consumer level. Check Ben Hecks podcast to see how finicky it is. http://www.youtube.com/watch?v=TLFonu92Wn4 disclaimer: I have one, was part of a package deal, would never buy one on it's own. On Mon, Jun 30, 2014 at 2:56 PM, Chris Noellert cnoell...@gmail.com wrote: Photoscan. Horrible learning materials and interface but it does what it says on the tin and surprisingly well. Best, Chris Sent from my iPhone On Jun 30, 2014, at 6:52 PM, Michael Garrett michaeld...@gmail.com wrote: Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising *
Re: [Nuke-users] Prosumer Lidar ?
Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- [image: ohufxLogo 50x50] http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
Re: [Nuke-users] Prosumer Lidar ?
Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- [image: ohufxLogo 50x50] http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/
Re: [Nuke-users] Prosumer Lidar ?
Only throwing this out there because it just came up on another list, but it might be worth taking a look at. http://pix4d.com/ -Nathan From: Michael Garrett Sent: Monday, June 30, 2014 9:52 AM To: dave...@gmail.com ; Nuke user discussion Subject: Re: [Nuke-users] Prosumer Lidar ? Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein mailto:a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png vfx compositing | workflow customisation and consulting ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- vfx compositing | workflow customisation and consulting ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http
Re: [Nuke-users] Prosumer Lidar ?
Go agisoft photoscan or go home :) On 30 June 2014 18:05, Nathan Rusch nathan_ru...@hotmail.com wrote: Only throwing this out there because it just came up on another list, but it might be worth taking a look at. http://pix4d.com/ -Nathan *From:* Michael Garrett michaeld...@gmail.com *Sent:* Monday, June 30, 2014 9:52 AM *To:* dave...@gmail.com ; Nuke user discussion nuke-users@support.thefoundry.co.uk *Subject:* Re: [Nuke-users] Prosumer Lidar ? Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein mailto:a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us
Re: [Nuke-users] Prosumer Lidar ?
Photoscan surprised me when doing a really (really) sloppy test with no calibration whatsoever... Surprisingly good cloud and mesh.. http://www.agisoft.ru/products/photoscan And cheap too! On Mon, Jun 30, 2014 at 7:05 PM, Nathan Rusch nathan_ru...@hotmail.com wrote: Only throwing this out there because it just came up on another list, but it might be worth taking a look at. http://pix4d.com/ -Nathan *From:* Michael Garrett michaeld...@gmail.com *Sent:* Monday, June 30, 2014 9:52 AM *To:* dave...@gmail.com ; Nuke user discussion nuke-users@support.thefoundry.co.uk *Subject:* Re: [Nuke-users] Prosumer Lidar ? Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein mailto:a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http
Re: [Nuke-users] Prosumer Lidar ?
Haha... Groeneboom came before me by a couple of seconds :D On Mon, Jun 30, 2014 at 8:17 PM, theodor groeneboom plateryt...@gmail.com wrote: Go agisoft photoscan or go home :) On 30 June 2014 18:05, Nathan Rusch nathan_ru...@hotmail.com wrote: Only throwing this out there because it just came up on another list, but it might be worth taking a look at. http://pix4d.com/ -Nathan *From:* Michael Garrett michaeld...@gmail.com *Sent:* Monday, June 30, 2014 9:52 AM *To:* dave...@gmail.com ; Nuke user discussion nuke-users@support.thefoundry.co.uk *Subject:* Re: [Nuke-users] Prosumer Lidar ? Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein mailto:a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | workflow customisation and consulting http://ohufx.com/index.php/vfx-customising * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http
Re: [Nuke-users] Prosumer Lidar ?
Thanks for the tip Nathan! That Pix4d looks nice, I'll try it out when I find some time. But Photoscan is great and so far is what I've used for real with a limited degree of success. There are also the ones from Photomodeler http://www.photomodeler.com/index.html but it's all Win only and I couldn't spend to much time with the demos at the time. On Mon, Jun 30, 2014 at 3:19 PM, Fredrik Pihl fre...@gmail.com wrote: Haha... Groeneboom came before me by a couple of seconds :D On Mon, Jun 30, 2014 at 8:17 PM, theodor groeneboom plateryt...@gmail.com wrote: Go agisoft photoscan or go home :) On 30 June 2014 18:05, Nathan Rusch nathan_ru...@hotmail.com wrote: Only throwing this out there because it just came up on another list, but it might be worth taking a look at. http://pix4d.com/ -Nathan *From:* Michael Garrett michaeld...@gmail.com *Sent:* Monday, June 30, 2014 9:52 AM *To:* dave...@gmail.com ; Nuke user discussion nuke-users@support.thefoundry.co.uk *Subject:* Re: [Nuke-users] Prosumer Lidar ? Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein mailto:a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing listnuke-us...@support.thefoundry.co.uk, http
Re: [Nuke-users] Prosumer Lidar ?
Runs on win,osx linux too. On 30 June 2014 21:35, Michael Garrett michaeld...@gmail.com wrote: Photoscan was mentioned to me recently actually, seems like there's a bit of consensus. On 30 June 2014 15:44, Diogo Girondi diogogiro...@gmail.com wrote: Thanks for the tip Nathan! That Pix4d looks nice, I'll try it out when I find some time. But Photoscan is great and so far is what I've used for real with a limited degree of success. There are also the ones from Photomodeler http://www.photomodeler.com/index.html but it's all Win only and I couldn't spend to much time with the demos at the time. On Mon, Jun 30, 2014 at 3:19 PM, Fredrik Pihl fre...@gmail.com wrote: Haha... Groeneboom came before me by a couple of seconds :D On Mon, Jun 30, 2014 at 8:17 PM, theodor groeneboom plateryt...@gmail.com wrote: Go agisoft photoscan or go home :) On 30 June 2014 18:05, Nathan Rusch nathan_ru...@hotmail.com wrote: Only throwing this out there because it just came up on another list, but it might be worth taking a look at. http://pix4d.com/ -Nathan *From:* Michael Garrett michaeld...@gmail.com *Sent:* Monday, June 30, 2014 9:52 AM *To:* dave...@gmail.com ; Nuke user discussion nuke-users@support.thefoundry.co.uk *Subject:* Re: [Nuke-users] Prosumer Lidar ? Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein mailto:a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing
Re: [Nuke-users] Prosumer Lidar ?
I think I had not paid attention to it before because I thought it was one of those old win-only programs. Great that it's on all platforms. On 30 June 2014 16:40, theodor groeneboom plateryt...@gmail.com wrote: Runs on win,osx linux too. On 30 June 2014 21:35, Michael Garrett michaeld...@gmail.com wrote: Photoscan was mentioned to me recently actually, seems like there's a bit of consensus. On 30 June 2014 15:44, Diogo Girondi diogogiro...@gmail.com wrote: Thanks for the tip Nathan! That Pix4d looks nice, I'll try it out when I find some time. But Photoscan is great and so far is what I've used for real with a limited degree of success. There are also the ones from Photomodeler http://www.photomodeler.com/index.html but it's all Win only and I couldn't spend to much time with the demos at the time. On Mon, Jun 30, 2014 at 3:19 PM, Fredrik Pihl fre...@gmail.com wrote: Haha... Groeneboom came before me by a couple of seconds :D On Mon, Jun 30, 2014 at 8:17 PM, theodor groeneboom plateryt...@gmail.com wrote: Go agisoft photoscan or go home :) On 30 June 2014 18:05, Nathan Rusch nathan_ru...@hotmail.com wrote: Only throwing this out there because it just came up on another list, but it might be worth taking a look at. http://pix4d.com/ -Nathan *From:* Michael Garrett michaeld...@gmail.com *Sent:* Monday, June 30, 2014 9:52 AM *To:* dave...@gmail.com ; Nuke user discussion nuke-users@support.thefoundry.co.uk *Subject:* Re: [Nuke-users] Prosumer Lidar ? Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein mailto:a...@curvstudios.com a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k
Re: [Nuke-users] Prosumer Lidar ?
Photoscan. Horrible learning materials and interface but it does what it says on the tin and surprisingly well. Best, Chris Sent from my iPhone On Jun 30, 2014, at 6:52 PM, Michael Garrett michaeld...@gmail.com wrote: Can you recommend a particular photogrammetry-based tool that creates dense point clouds? Obviously there is Nuke's internal toolset which has provided great results on occasion and I haven't fully exploited it yet. On 30 June 2014 04:42, David Yu dave...@gmail.com wrote: Sense and all the Depth sensor type of scanner is like the Kinect. Low res, near field scanning. No more than 10 feet range and very noisy scans. Kinect and Asus Xtion Pro Live 640 x 480 resolution depth sensor. Data is really not usable for pro work. Better off using Photogrammetry tools for Lidar like scans. It's not realtime but the output is much better and gives a dense point cloud with textured mesh. Photogrammetry have no scale limits. Use a drone chopper and scan your neighbourhood :) Regards. Dave On Sun, Jun 29, 2014 at 1:59 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png vfx compositing | workflow customisation and consulting ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png vfx compositing | workflow customisation and consulting ___ Nuke-users mailing list
Re: [Nuke-users] Prosumer Lidar ?
just by a few zeros ;) On 29/06/14 16:46, HSK wrote: Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com mailto:fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD(ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don't have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD(ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall -- https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building -- https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org http://www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don't hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubensteina...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk,http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk,http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | *workflow customisation and consulting http://ohufx.com/index.php/vfx-customising* * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk mailto:Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo 50x50 http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | *workflow customisation and consulting http://ohufx.com/index.php/vfx-customising* * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
Re: [Nuke-users] Prosumer Lidar ?
Ari there is this one for objects that is only $400 http://cubify.com/Products/Sense Randy S. Little http://www.rslittle.com/ http://www.imdb.com/name/nm2325729/ On Sat, Jun 28, 2014 at 8:08 PM, Ari Rubenstein a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
Re: [Nuke-users] Prosumer Lidar ?
Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
Re: [Nuke-users] Prosumer Lidar ?
The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD(ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don't have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD(ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall -- https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building -- https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org http://www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don't hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo 50x50 http://www.ohufx.com *vfx compositing http://ohufx.com/index.php/vfx-compositing | *workflow customisation and consulting http://ohufx.com/index.php/vfx-customising* * ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
Re: [Nuke-users] Prosumer Lidar ?
Yikes! Apparently I was waaay off! Sent from my iPhone On Jun 28, 2014, at 11:00 PM, Frank Rueter|OHUfx fr...@ohufx.com wrote: The pricing of that one is actually around $25k. That does not include the pay-as-you go data processing which I found a bit annoying. This is the info I got recently from a vendor in Australia: ZEB1 is charged at $24,860 AUD (ex Tax, ex Shipping) for the handheld unit. The data processing is charged using a pay-as-you-go model and you buy processing credits as and when you need them. This allows a lot of flexibility and means you don’t have a large upfront software cost or annual maintenance charges. The credits are charged at $0.50 AUD (ex Tax) per credit which is equivalent to 2m of data capture. Discounts are available for larger depending on how many credits you purchase at once. I have attached a brochure for your information and also some links to allow you to download some sample data below - you can download the data in LAZ or PLY format. Exhibition Hall – https://www.hightail.com/download/elNLQmtWUnI5eFVFSzhUQw 2 Story Building – https://www.hightail.com/download/elNLQmtWUnJ0NjgxWjhUQw You can open the data in any software that can accept a pointcloud and have a look at the data output. You can use Cloud Compare www.cloudcompare.org (open source software) You may also be interested in reading an article written in LiDAR News following a recent trial and evaluation by an American surveyor who recently went on to purchase a system of his own. It may not be related to your line of work, but it gives you an idea of the capabilities of the system: http://www.lidarnews.com/PDF/LiDARMagazine_Gutelius-Zeb1Review_Vol4No1.pdf I hope this information is helpful. If you have any further queries please don’t hesitate to contact me. On 29/06/14 14:09, HSK wrote: Hey Ari, You may be thinking of the Zebedee? (Zeb1) https://www.fxguide.com/quicktakes/meet-zebedee-handheld-lidar-scanning/ I think it's relatively cheap to buy ($200-$400) But it uses a pay as you go model for processing the data. From what I've heard the results are okay, and a little bit noisy What do you want to use it for? Could photogrammetry be an option? Sent from my iPhone On Jun 28, 2014, at 8:08 PM, Ari Rubenstein a...@curvstudios.com wrote: Has anyone explored any of the burgeoning prosumer Lidar options out there and have positive feedback ? There was a $1k or less Kickstarter Lidar project I read about last year but can't recall the company name, anyone ? Thx Ari Blue Sky Sent from my iPhone___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users -- ohufxLogo_50x50.png vfx compositing | workflow customisation and consulting ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users ___ Nuke-users mailing list Nuke-users@support.thefoundry.co.uk, http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users