Re: [onap-discuss] LATEST_ID to install ONAP - use git now
Thank you Michael and Roger. Also , please let us know from where to download the Beijing release code? Regards Pavithra R From: Michael O'Brien Sent: Tuesday, June 19, 2018 8:36 AM To: Roger Maitland ; Pavithra R13 ; onap-discuss@lists.onap.org Subject: RE: [onap-discuss] LATEST_ID to install ONAP - use git now Pavithra, Hi, we have been getting a lot of questions from Infosys from a couple of your developers on the wikis about Amsterdam configuration – I have been trying to answer them on the wiki pages. The instructions on using Jira links – AKA LATEST_ID were adjusted last week to reference the move to git – they were required so I could run the fully automated ARM templates even while the installation scripts were in pending review. If there is not a specific reason you need to run Amsterdam then I would suggest moving to Beijing/master so you are off the hybrid environment in Amsterdam and on an actively supported version of rancher/helm/docker – as this stack is a moving target – likely moving to Rancher 1.6.18 any minute now. Perhaps we can schedule an installation demo of OOM on Beijing on zoom for the benefit of anyone else in the community. The wiki you are referring to had a reference to the latest ID on a temporary JIRA attachment while the installation artifacts were in review for 8-10 weeks -they have since been submitted to git in the following directory. I would advise not using oom_entrypoint.sh in favor of running a 2 step oom_rancher_install.sh and cd.sh so you can install the undercloud separately from onap. I had to use LATEST_ID because as jira was temporarily used for source control the ID changed daily – and I got questions on any that were not updated in the wiki – the ID is no longer required because we are in GIT now for the past 6 weeks. https://git.onap.org/logging-analytics/tree/deploy<https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.onap.org%2Flogging-analytics%2Ftree%2Fdeploy=01%7C01%7CPavithra_R13%40infosys.com%7C132b19342e9c4ee2076408d5d591c15f%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=454ExMXmWKU2ZV8PVZAZJJvmV%2FeMNHm5vZqtYryh0bA%3D=0> https://git.onap.org/logging-analytics/tree/deploy/rancher/oom_entrypoint.sh<https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.onap.org%2Flogging-analytics%2Ftree%2Fdeploy%2Francher%2Foom_entrypoint.sh=01%7C01%7CPavithra_R13%40infosys.com%7C132b19342e9c4ee2076408d5d591c15f%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=JjGy4LbkWqJyN1G604t5laiIey2YOpCzYdejMIMhSlQ%3D=0> https://git.onap.org/logging-analytics/tree/deploy/rancher/oom_rancher_setup.sh<https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.onap.org%2Flogging-analytics%2Ftree%2Fdeploy%2Francher%2Foom_rancher_setup.sh=01%7C01%7CPavithra_R13%40infosys.com%7C132b19342e9c4ee2076408d5d591c15f%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=qekBFrH1F%2FfyDAlSbpcjfqhX9AIA9%2Banojq2j8Pyfbg%3D=0> https://git.onap.org/logging-analytics/tree/deploy/cd.sh<https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.onap.org%2Flogging-analytics%2Ftree%2Fdeploy%2Fcd.sh=01%7C01%7CPavithra_R13%40infosys.com%7C132b19342e9c4ee2076408d5d591c15f%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=OHtJCMD99fm0m%2F4g0H%2F1ZCN%2B8Onw7Hgx4n%2FSoq5RZQI%3D=0> https://git.onap.org/logging-analytics/tree/deploy/aws/oom_cluster_host_install.sh<https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.onap.org%2Flogging-analytics%2Ftree%2Fdeploy%2Faws%2Foom_cluster_host_install.sh=01%7C01%7CPavithra_R13%40infosys.com%7C132b19342e9c4ee2076408d5d591c15f%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=3KdJLyHpYSWectEK3wPMRjDlNrv%2FBfh8XBgajWftldQ%3D=0> The instructions on running the 2 scripts on a 1+N cluster are in the following place – since we were recently forced to always cluster deployments – my scripts need to catch up – hence why the cluster host install is run manually on each node for now. https://wiki.onap.org/display/DW/Cloud+Native+Deployment#CloudNativeDeployment-UndercloudInstall-Rancher/Kubernetes/Helm/Docker<https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.onap.org%2Fdisplay%2FDW%2FCloud%2BNative%2BDeployment%23CloudNativeDeployment-UndercloudInstall-Rancher%2FKubernetes%2FHelm%2FDocker=01%7C01%7CPavithra_R13%40infosys.com%7C132b19342e9c4ee2076408d5d591c15f%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=ptKZ9Km2oTz45wvvxUIIeF0BZKCue80t1NNTEVegnJI%3D=0> In the instructions above I don’t go into the specifics of standard services that are done by the heat/arm/cloudformation templates that run the entrypoint – like creating your spot VM or creating the NFS share – these are already detailed in readthedocs and automated in the cloud specific templates. For manual instructions please refer to the read the docs links Roger provides. Thank you /michael From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lis
[onap-discuss] LATEST_ID to install ONAP
Hi All, I want to install ONAP based on Kubernetes rancher. As per the wiki we need LATEST_ID to download and install the oom_entrypoint.sh script. Can anybody please help me on how to find the latest ID. Regards, Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] ONAP Portal access from outside
Hi Mandeep, I recently installed Amsterdam release and am able to access the portal directly using the portalapps container ip. Previosuly when we tried it was through VNC portal as mentioned by you. During access through VNC portal we were able to access the SDC/VID components from a different server also. Now when we try to access directly through portalapps IP only the main portal page is accessible from other servers. Note: I dint make any changes to access directly . Just downloaded the oom of Amsterdam branch recently and brought up. Regards Pavithra R From: Mandeep Khinda [mailto:mandeep.khi...@amdocs.com] Sent: Wednesday, June 13, 2018 6:43 PM To: Pavithra R13 ; onap-discuss@lists.onap.org Subject: Re: [onap-discuss] ONAP Portal access from outside Hi, In ONAP Amsterdam using OOM, supported ONAP portal is access is through the VNC utility pod. Direct access was introduced in OOM Beijing. I am sure there are ways to get direct access either by a new approach or by backporting what was done in Beijing. It also depends on what you did to get direct access in Amsterdam using Kubernetes. I think the problem you are facing is that the widget applications loaded by the portal are not being exposed externally or are not reachable by your client that is on the same subnet. That is configured in the portal database for each application. I believe you can view/edit this in the portal GUI under application or widget configuration. There is a URL and port for backend and frontend widgets that also would need to be reachable by your client and not just the main portal front end. The port will need to be a nodePort and in Amsterdam I don’t believe they are because within the VNC pod the internal ports are resolvable. Thanks, Mandeep From: mailto:onap-discuss-boun...@lists.onap.org>> on behalf of Pavithra R13 mailto:pavithra_...@infosys.com>> Date: Wednesday, June 13, 2018 at 2:49 AM To: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" mailto:onap-discuss@lists.onap.org>> Subject: [onap-discuss] ONAP Portal access from outside Hi All, I have installed Kubernetes based ONAP Amsterdam this week on a Ubuntu server. I am able to access the Portal and the SDC/VID/Policy components from the ONAP Ubuntu server. But when I try to access the portal from a different desktop which is in the same subnet of ONAP server , I am able to access only the ONAP portal ,the other components are not accessible . Kindly let me know how to access the portal components from other servers. Note: I have made host entry of the portal apps container and other containers in ONAP server and portal container . I am accessing the portal directly using portal apps container and not through VNC portal. Please find attached screenshot for the portal pods. Regards Pavithra R This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at https://www.amdocs.com/about/email-disclaimer<https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.amdocs.com%2Fabout%2Femail-disclaimer=01%7C01%7CPavithra_R13%40infosys.com%7Ceed2925383aa44a97a2108d5d1300c26%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=tfNhiqZuPGBBNBAFJUrl02t1mr2XpfNW%2BLH%2Bfq7ZMuo%3D=0> ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
[onap-discuss] Service distribution error in SDC
Hi All We have installed Amsterdam release of ONAP on Kubernetes. All services are up and running and we are able to access the ONAP Portal. We have successfully created a demo vfw service, we are able to test and approve the distribution. But the distribution of service is failing with " Error code: POL5000,Status code: 500,Internal Server Error". Please help us in resolving the issue. Note: Dmaap is running and we are not able to see any error in SDC logs. Regards, Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] Accessing ONAP portal on Master OOM
Hi All I was able to access the ONAP Portal directly through the ONAP PORTAL API in OOM master branch for ONAP installation on Kubernetes on Rancher . I could see the login screen. But when I enter credentials and click on LOGIN button its unresponsive. Kindly help me to resolve. Regards Pavithra R From: Pavithra R13 Sent: Thursday, April 19, 2018 10:19 AM To: onap-discuss@lists.onap.org Subject: [onap-discuss]Accessing ONAP portal on Master OOM Hi All, I have cloned OOM branch master for ONAP installation on Kubernetes on Rancher. And I could see there was no oneclick folder as there was in Amsterdam branch. So installed through helm as mentioned in README.md file. Now all the containers are up and running. Kindly help me in accessing the VNC portal and ONAP portal , as I could not see any vnc portal pod I am not aware of how to proceed. Regards Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
[onap-discuss] Accessing ONAP portal on Master OOM
Hi All, I have cloned OOM branch master for ONAP installation on Kubernetes on Rancher. And I could see there was no oneclick folder as there was in Amsterdam branch. So installed through helm as mentioned in README.md file. Now all the containers are up and running. Kindly help me in accessing the VNC portal and ONAP portal , as I could not see any vnc portal pod I am not aware of how to proceed. Regards Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
[onap-discuss] ONAP using heat templates
Hi All I am trying to install ONAP using heat templates on Openstack Pike. I downloaded the template and environment file from the link https://nexus.onap.org/content/sites/raw/org.openecomp.demo/heat/OpenECOMP/1.0.0 . The stack is up and am able to access the VMs. But am not able to access the ONAP PORTAL. When I logged into the portal VM and ran "docker ps -a" I could see there is no docker installed. So I guess the installation might not have completed successfully and just empty VMs are created. Kindly let me know how to check the installation or let me know any other working heat templates. Thanks & Regards, Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
[onap-discuss] VNC portal single user mode
Hi All We have setup ONAP, able to access the ONAP Portal through VNC portal and proceed with further testing. But we could see limitation with accessing VNC portal that it's in single user mode. So we are not able to access at the same time and proceed with our work in parallel. We are facing time lag in our work due to this limitation. Is it the limitation with VNC portal or ONAP portal, and is there a way to overcome it ? Regards Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] TOSCA service instantiation fails
Hi Chen Yeah. The Template parameter tab is empty in our UUI due to which we are facing Missing parameter issue. Please find attached E2E service csar used. Regards Pavithra R From: Chenchuanyu [mailto:chenchua...@huawei.com] Sent: Thursday, March 8, 2018 6:56 AM To: Pavithra R13 <pavithra_...@infosys.com>; shentao <shen...@chinamobile.com>; Seshu m <seshu.kuma...@huawei.com>; onap-discuss@lists.onap.org Subject: 答复: [onap-discuss] TOSCA service instantiation fails Hi, From your screenshot, I found ‘Template Parameter’ Tab is not generated correctly(There will be VNF location inputs, or other service inputs generated), so I think maybe it is because some issue of the template designed. If you click ‘OK’ button right now, I think error will be a predicted result. Please describe the flow you design the E2E service, or support your E2E service csar. I can help to check If it is right. Best wishes, Chuanyu Chen. 发件人: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] 代表 Pavithra R13 发送时间: 2018年3月7日 20:07 收件人: shentao; Seshu m; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 主题: Re: [onap-discuss] TOSCA service instantiation fails Hi Shentao We have registered UUI server and GUI with MSB already . PFA images for error in UUI server logs. Regards Pavithra R From: shentao [mailto:shen...@chinamobile.com] Sent: Wednesday, March 7, 2018 5:10 PM To: Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>; 'Seshu m' <seshu.kuma...@huawei.com<mailto:seshu.kuma...@huawei.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: 答复: [onap-discuss] TOSCA service instantiation fails Hi, Pavithra UUI is calling SO API from MSB like other components. We should register UUI components firstly. And then UUI server component will call SO API through MSB which is configured with registered script. Best regards, Tao 发件人: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] 代表 Pavithra R13 发送时间: 2018年3月7日 18:06 收件人: Seshu m; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> 主题: Re: [onap-discuss] TOSCA service instantiation fails Hi Seshu The instance created previously using SO API was not deleted before we retried with UUI. Also in MSO the logs are not updated while instantiating from UUI. Only in UUI logs we were able to find errors. Please find attached image for reference. We found from code that UUI is directly making API call to MSO whereas to other components it’s through MSB and we are facing error during service instantiation request to MSO.So where exactly we should check or specify the correct MSO IP in UUI? Regards Pavithra R From: Seshu m [mailto:seshu.kuma...@huawei.com] Sent: Wednesday, March 7, 2018 1:04 PM To: Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] TOSCA service instantiation fails Hi Pavithra Please share us the logs of SO and was the instance created before deleted before you re-tried the create service. Best regards Seshu Kumar M Huawei Technologies India Pvt, Ltd. 本邮件及其附件含有华为公司的保密信息,仅限于发送给上面地址中列出的个人或群组。禁 止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复制、或散发)本邮件中 的信息。如果您错收了本邮件,请您立即电话或邮件通知发件人并删除本邮件! This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13 Sent: Wednesday, March 07, 2018 1:55 PM To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: [onap-discuss] TOSCA service instantiation fails Hi All We have set up Kubernetes based ONAP and created TOSCA based E2E service. We are able to instantiate the E2E service directly using SO API. But while instantiating the E2E service through UUI we are facing “Internal Server Error”. Could you please help in resolving the issue. Please find below screenshot for reference. [cid:image001.jpg@01D3B629.A7B8D920] Regards Pavithra R 3b588951-5ed1-45d7-87e4-36b967bc777c.csar Description: 3b588951-5ed1-45d7-87e4-36b967bc777c.csar ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] TOSCA service instantiation fails
Hi Seshu The instance created previously using SO API was not deleted before we retried with UUI. Also in MSO the logs are not updated while instantiating from UUI. We found from code that UUI is directly making API call to MSO whereas to other components it’s through MSB. So where exactly we should check or specify the correct MSO IP in UUI? Regards Pavithra R From: Seshu m [mailto:seshu.kuma...@huawei.com] Sent: Wednesday, March 7, 2018 1:04 PM To: Pavithra R13 <pavithra_...@infosys.com>; onap-discuss@lists.onap.org Subject: RE: [onap-discuss] TOSCA service instantiation fails Hi Pavithra Please share us the logs of SO and was the instance created before deleted before you re-tried the create service. Best regards Seshu Kumar M Huawei Technologies India Pvt, Ltd. 本邮件及其附件含有华为公司的保密信息,仅限于发送给上面地址中列出的个人或群组。禁 止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复制、或散发)本邮件中 的信息。如果您错收了本邮件,请您立即电话或邮件通知发件人并删除本邮件! This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it! From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13 Sent: Wednesday, March 07, 2018 1:55 PM To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: [onap-discuss] TOSCA service instantiation fails Hi All We have set up Kubernetes based ONAP and created TOSCA based E2E service. We are able to instantiate the E2E service directly using SO API. But while instantiating the E2E service through UUI we are facing “Internal Server Error”. Could you please help in resolving the issue. Please find below screenshot for reference. [cid:image001.jpg@01D3B61E.DB61A500] Regards Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
[onap-discuss] TOSCA service instantiation fails
Hi All We have set up Kubernetes based ONAP and created TOSCA based E2E service. We are able to instantiate the E2E service directly using SO API. But while instantiating the E2E service through UUI we are facing "Internal Server Error". Could you please help in resolving the issue. Please find below screenshot for reference. [cid:image001.jpg@01D3B606.DB3FB200] Regards Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
[onap-discuss] Error in image pull during config creation
Hi All We are facing "Error in Image pull" issue while creating onap-config using both Amsterdam and Master branch. Is there any issue with the repo, Could anyone please let us know why this issue is happening. Regards Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] MSB upgrade
Hi Zhao I am able to access ESR via MSB port , but the vnfm and vim is not getting registered. I could see “Bad Gateway Error” during registration. PFA screenshot for the error in log. Lizi/Zhao, We would like to reinstall only MSB without disturbing the other services. In that case will already installed services be registered in MSB automatically, or it will require manual registration with MSB. Regards Pavithra R From: zhao.huab...@zte.com.cn [mailto:zhao.huab...@zte.com.cn] Sent: Wednesday, February 28, 2018 12:18 PM To: li.z...@zte.com.cn; Pavithra R13 <pavithra_...@infosys.com> Cc: onap-discuss@lists.onap.org Subject: Re: Re: [onap-discuss] MSB upgrade This message was identified as a phishing<http://aka.ms/LearnAboutPhishing> scam. Feedback<http://aka.ms/SafetyTipsFeedback> Hi Pavithra, Lizi, We don't have to manually unregister and register services in OOM/k8s deployment. Kube2msb is watching the k8s deployment change events and automatically register/unregister services to MSB. "UUI/ESR is not able to communicate with AAI through MSB" Are you able to access ESR via the node port of MSB? Such as http://127.0.0.1:30080/iui/aai-esr-gui/extsys/vim/vimView.html If IIf you get problem accessing it, please send me log of msb internal api gateway. You can get the log by run: docker logs {contianer_id_of_msb-iag} Thanks, Huabing 原始邮件 发件人:李滋00164331 收件人:pavithra_...@infosys.com<mailto:pavithra_...@infosys.com> <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>> 抄送人:onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> <onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>> 日 期 :2018年02月28日 14:31 主 题 :Re: [onap-discuss] MSB upgrade ___ onap-discuss mailing list onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=https%3a%2f%2flists.onap.org%2fmailman%2flistinfo%2fonap%2ddiscuss=3DC9A076-6640-2905-A1C6-28406BBF484C=f63efd9aed1e0a367f4bd39381444e47841a5725-653f35cfe3bf0555a380bcd03eede5ad37283ed1 Hi Pavithra R, You can just delete the register information from msb portal, and re-register the service to MSB. Please refer to the curl commond in https://gerrit.onap.org/r/gitweb?p=demo.git;a=blob;f=boot/msb_vm_init.sh;h=0a087b04bdaa8dc9b534ffe28673dd3e81a7e428;hb=HEAD<https://apac01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fimsva91-ctp.trendmicro.com%3A443%2Fwis%2Fclicktime%2Fv1%2Fquery%3Furl%3Dhttps%253a%252f%252fgerrit.onap.org%252fr%252fgitweb%253fp%253ddemo.git%253ba%253dblob%253bf%253dboot%252fmsb%255fvm%255finit.sh%253bh%253d0a087b04bdaa8dc9b534ffe28673dd3e81a7e428%253bhb%253dHEAD%26umid%3D3DC9A076-6640-2905-A1C6-28406BBF484C%26auth%3Df63efd9aed1e0a367f4bd39381444e47841a5725-ad8a682fbd2100e15da21e0b05c8c642f831ba01=01%7C01%7CPavithra_R13%40infosys.com%7Cb5c3693abb004f75c10c08d57e77bd29%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=xi4vbk4oBvlHWK52Kbe561RJ7vq0kx6%2FqfhgFoSUKFs%3D=0> . You not have to reinstall MSB or the other services. For MSB portal please visit http://MSB_IP/iui/microservices/default.html . Click the msdiscover card. There will be a swagger ui under that page. Call the API to delete the register information. DELETE<https://apac01.safelinks.protection.outlook.com/?url=http%3A%2F%2F10.74.148.80%2Fiui%2Fmicroservices%2Fapi-doc%2Findex.html%3Furl%3D%2Fapijson%2Fmsdiscover%2Fv1%26api%3D%2Fapi%2Fmsdiscover%2Fv1%23!%2FService_Resource%2FdeleteMicroService=01%7C01%7CPavithra_R13%40infosys.com%7Cb5c3693abb004f75c10c08d57e77bd29%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=AIfT62DvCoo6zLR1xxWJwy94hELr%2BWsiCvq6LXss%2BGQ%3D=0> /services/{serviceName}/version/{version}<https://apac01.safelinks.protection.outlook.com/?url=http%3A%2F%2F10.74.148.80%2Fiui%2Fmicroservices%2Fapi-doc%2Findex.html%3Furl%3D%2Fapijson%2Fmsdiscover%2Fv1%26api%3D%2Fapi%2Fmsdiscover%2Fv1%23!%2FService_Resource%2FdeleteMicroService=01%7C01%7CPavithra_R13%40infosys.com%7Cb5c3693abb004f75c10c08d57e77bd29%7C63ce7d592f3e42cda8ccbe764cff5eb6%7C1=AIfT62DvCoo6zLR1xxWJwy94hELr%2BWsiCvq6LXss%2BGQ%3D=0> Thanks, LiZi 发件人:PavithraR13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>> 收件人:onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> <onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>> 日 期 :2018年02月28日 13:43 主 题 :[onap-discuss] MSB upgrade ___ onap-discuss mailing list onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=https%3a%2f%2flists.onap.org%2fmailman%2flistinfo%2fonap%2ddiscuss=3DC9A076-6640-2905-A1C6-28406BBF484C=f63efd9aed1e0a367f4bd39381444e47841a5725-653f35cfe3bf0555a380bcd03eede5ad37283ed1 Hi All We have currently installed Kubernetes based
[onap-discuss] MSB upgrade
Hi All We have currently installed Kubernetes based ONAP Amsterdam on our environment. We need few clarifications regarding MSB. 1. UUI/ESR is not able to communicate with AAI through MSB, but all corresponding services are registered with MSB. What could be the issue? 2. We would like to upgrade MSB image to latest version. In that case should we re-install all the other components so that it will be registered with MSB or is there any other procedure to register the components with MSB without re-installation? Regards Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] Issue in vFW instantiation E2E - OOM with OpenStack
Hi We downloaded the vid docker (1.1.1) as suggested in JIRA but delete vf module was not working. Add vnf button was also not responding . Please suggest the recent working version. Regards Pavithra R From: Sonsino, Ofir [mailto:os0...@intl.att.com] Sent: Sunday, December 17, 2017 3:46 PM To: PLATANIA, MARCO <plata...@research.att.com>; Pavithra R13 <pavithra_...@infosys.com>; onap-discuss@lists.onap.org Subject: RE: [onap-discuss] Issue in vFW instantiation E2E - OOM with OpenStack Hi Pavithra, Regarding deleting a VF module, we had that issue fixed: https://jira.onap.org/browse/VID-95<https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=https%3a%2f%2fjira.onap.org%2fbrowse%2fVID%2d95=019B12BF-6086-8505-839A-B03E10BDBE3C=f63efd9aed1e0a367f4bd39381444e47841a5725-18a4433ccfbd32028c040990111896c6b419abe4> You can pull the latest VID docker and try again. Ofir From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of PLATANIA, MARCO Sent: Thursday, December 14, 2017 3:20 PM To: Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] Issue in vFW instantiation E2E - OOM with OpenStack ***Security Advisory: This Message Originated Outside of AT *** Reference http://cso.att.com/EmailSecurity/IDSP.html for more information. Hello Pavithra, Make sure you are populating oom/kubernetes/config/onap-parameters.yaml correctly. Those parameters should reflect your OpenStack environment and are used by SO during VNF instantiation. “Maximun number of poll attempts exceeded” indicates a timeout expiration. SO is trying to contact OpenStack but something fails. Also, deleting VF module manually is not currently supported. Perhaps SO people can add more on how to get past the timeout expiration. Thanks, Marco From: <onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org>> on behalf of Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>> Date: Thursday, December 14, 2017 at 7:27 AM To: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" <onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>> Subject: [onap-discuss] Issue in vFW instantiation E2E - OOM with OpenStack Hi All, I am using OOM 1.1.0 release and following the steps/videos posted in wiki(“https://wiki.onap.org/display/DW/vFW+instantiation+E2E+-+OOM+with+OpenStack”<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.onap.org_display_DW_vFW-2Binstantiation-2BE2E-2B-2D-2BOOM-2Bwith-2BOpenStack-25E2-2580-259D=DwQFAg=LFYZ-o9_HUMeMTSQicvjIg=KgFIQiUJzSC0gUhJaQxg8eC3w16GC3sKgWIcs4iIee0=rCOnEC5tZ0fVsMKfxQqp5ApDRHaED4_A1rsbMfb4PvY=k-tEQq_19KlOUtktfrb98WNKFX5IViwbWzz73EbLzjM=>). At step 10g (create VF-Module for vFW_SINC) I am facing the error “Maximun number of poll attempts exceeded.” And VF module on the VID page shows orchestration status as “pending delete”. Also the stack doesn’t get created in my OpenStack environment. I could not manually delete the VF module also. It shows “System failure” when trying to delete . How do I get past this? Any suggestions on what could be failing/missing. I tried two times and it’s failing with same error “Maximun number of poll attempts exceeded.” Kindly suggest solutions to solve the issue and successfully create VF module. Regards, Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
[onap-discuss] Issue in vFW instantiation E2E - OOM with OpenStack
Hi All, I am using OOM 1.1.0 release and following the steps/videos posted in wiki("https://wiki.onap.org/display/DW/vFW+instantiation+E2E+-+OOM+with+OpenStack;). At step 10g (create VF-Module for vFW_SINC) I am facing the error "Maximun number of poll attempts exceeded." And VF module on the VID page shows orchestration status as "pending delete". Also the stack doesn't get created in my OpenStack environment. I could not manually delete the VF module also. It shows "System failure" when trying to delete . How do I get past this? Any suggestions on what could be failing/missing. I tried two times and it's failing with same error "Maximun number of poll attempts exceeded." Kindly suggest solutions to solve the issue and successfully create VF module. Regards, Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] Issue in ONAP Amsterdam release installation
Thank you Brein, Glozman and Ruijing. I was successfully able to bring up all the ONAP containers and could access the ONAP portal. But while initializing robot(./demo-k8s.sh init_robot) before health check its failing, and in logs I could see its due to "KeyError: u'GLOBAL_INJECTED_SCRIPT_VERSION'". Please find attached logs from /logs/demo/UpdateWebPage/log.html and let me know how to resolve it. Also in health check (./ete-k8s.sh health) the steps for the containers which I installed is PASS and all other were in FAIL including multiple API's. Is this the expected behavior but in a video(video from the link https://wiki.onap.org/display/DW/vFW+instantiation+E2E+-+OOM+with+OpenStack) I could see most steps of health check are in pass state. Regards Pavithra R From: Borislav Glozman [mailto:borislav.gloz...@amdocs.com] Sent: Tuesday, December 12, 2017 11:45 AM To: ruijing@intel.com; onap-discuss@lists.onap.org; Pavithra R13 <pavithra_...@infosys.com>; Michael O'Brien <frank.obr...@amdocs.com> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Please try installing branch release 1.1.0 of oom, it should be stable. Thanks, Borislav Glozman O. +972-9-7669188 M. +972-52-2835726 -Original Message----- From: Pavithra R13 [pavithra_...@infosys.com] Received: Tuesday, 12 Dec 2017, 4:50 To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> [onap-discuss@lists.onap.org]; Borislav Glozman [borislav.gloz...@amdocs.com]; Michael O'Brien [frank.obr...@amdocs.com]; Guo, Ruijing [ruijing@intel.com] Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Thanks Ruijung. How to fix this issue or if it's from ONAP side ,when this issue will be fixed so that we can start deployment again. Regards, Pavithra From: Guo, Ruijing <ruijing@intel.com<mailto:ruijing@intel.com>> Date: 12 December 2017 at 7:58:08 AM IST To: Borislav Glozman <borislav.gloz...@amdocs.com<mailto:borislav.gloz...@amdocs.com>>, Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>, Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>, onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> <onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Hi, I can deploy ONAP using kubeadm + k8s 1.7.11 + helm 2.7.2 + oom with 2 or 3 pods not working before. Recently, ONAP has some regression: 1. 73 Running: vagrant@onap:~$ kubectl get pods --all-namespaces | grep onap | grep Run | wc 73 4388176 2. 6 not Running (I think aai & sdc are regression) vagrant@onap:~$ kubectl get pods --all-namespaces | grep onap | grep -v Run onap-aai aai-service-749944520-rq3hj 0/1 Init:0/11231d onap-aai aai-traversal-2843093465-twsz70/2 Init:0/11241d onap-kube2msb kube2msb-registrator-4293827076-pl5kh 0/1 CrashLoopBackOff2691d onap-portal vnc-portal-3680188324-55m5r 0/1 Init:2/51221d onap-sdc sdc-be-754421819-x9z030/2 ImageInspectError 0 1d onap-sdc sdc-fe-902103934-s92q10/2 Init:0/11241d Thanks, -Ruijing -Original Message- From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13 Sent: Tuesday, December 12, 2017 10:11 AM To: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>; Borislav Glozman <borislav.gloz...@amdocs.com<mailto:borislav.gloz...@amdocs.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] Issue in ONAP Amsterdam release installation Hi Brien We downloaded the latest oom and were able to proceed but now the fe and be of SDC , vnc portal and dmaap, global Kafka of message router are not coming up due to error "search line limits were exceeded. Some dns names were omitted". We have Internet access without any firewall and we have configured google dns in resolv.conf . So kindly help us in resolving this issue . Regards Pavithra ________ From: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>> Date: 11 December 2017 at 7:39:58 PM IST To: Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>, Borislav Glozman <borislav.gloz...@amdocs.com<mailto:borislav.gloz...@amdocs.com>>, onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org&
[onap-discuss] [rancher][onap discuss] Amsterdam release installation
Hi All, The Rancher installation, Host registration in Kubernetes and the ONAP containers(They are in container creating state , taking overnight to come to running state) are taking a lot of time to come up , almost a whole day in Amsterdam release even after prepulling docker images . Could you please let me know if this is the expected behavior or if anybody else is facing the same state. Thanks & Regards, Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] Issue in ONAP Amsterdam release installation
Hi Glozman, We are currently installing 1.1.0 branch of oom only. Even then we are facing issue in sdc(be,fe), vnc portal, message router (dmaap, global kafka) containers. Those containers are not coming to running state. Regards, Pavithra R From: Borislav Glozman [mailto:borislav.gloz...@amdocs.com] Sent: Tuesday, December 12, 2017 11:45 AM To: ruijing@intel.com; onap-discuss@lists.onap.org; Pavithra R13 <pavithra_...@infosys.com>; Michael O'Brien <frank.obr...@amdocs.com> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Please try installing branch release 1.1.0 of oom, it should be stable. Thanks, Borislav Glozman O. +972-9-7669188 M. +972-52-2835726 -Original Message- From: Pavithra R13 [pavithra_...@infosys.com] Received: Tuesday, 12 Dec 2017, 4:50 To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> [onap-discuss@lists.onap.org]; Borislav Glozman [borislav.gloz...@amdocs.com]; Michael O'Brien [frank.obr...@amdocs.com]; Guo, Ruijing [ruijing@intel.com] Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Thanks Ruijung. How to fix this issue or if it's from ONAP side ,when this issue will be fixed so that we can start deployment again. Regards, Pavithra From: Guo, Ruijing <ruijing@intel.com<mailto:ruijing@intel.com>> Date: 12 December 2017 at 7:58:08 AM IST To: Borislav Glozman <borislav.gloz...@amdocs.com<mailto:borislav.gloz...@amdocs.com>>, Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>, Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>, onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> <onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Hi, I can deploy ONAP using kubeadm + k8s 1.7.11 + helm 2.7.2 + oom with 2 or 3 pods not working before. Recently, ONAP has some regression: 1. 73 Running: vagrant@onap:~$ kubectl get pods --all-namespaces | grep onap | grep Run | wc 73 4388176 2. 6 not Running (I think aai & sdc are regression) vagrant@onap:~$ kubectl get pods --all-namespaces | grep onap | grep -v Run onap-aai aai-service-749944520-rq3hj 0/1 Init:0/11231d onap-aai aai-traversal-2843093465-twsz70/2 Init:0/11241d onap-kube2msb kube2msb-registrator-4293827076-pl5kh 0/1 CrashLoopBackOff2691d onap-portal vnc-portal-3680188324-55m5r 0/1 Init:2/51221d onap-sdc sdc-be-754421819-x9z030/2 ImageInspectError 0 1d onap-sdc sdc-fe-902103934-s92q10/2 Init:0/11241d Thanks, -Ruijing -Original Message- From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13 Sent: Tuesday, December 12, 2017 10:11 AM To: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>; Borislav Glozman <borislav.gloz...@amdocs.com<mailto:borislav.gloz...@amdocs.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] Issue in ONAP Amsterdam release installation Hi Brien We downloaded the latest oom and were able to proceed but now the fe and be of SDC , vnc portal and dmaap, global Kafka of message router are not coming up due to error "search line limits were exceeded. Some dns names were omitted". We have Internet access without any firewall and we have configured google dns in resolv.conf . So kindly help us in resolving this issue . Regards Pavithra ____ From: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>> Date: 11 December 2017 at 7:39:58 PM IST To: Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>, Borislav Glozman <borislav.gloz...@amdocs.com<mailto:borislav.gloz...@amdocs.com>>, onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> <onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Pavithra, I have it backwards - jetlag. You are OK for helm 2.3 - it is just as Borislav said - your repo is very old - that change occurred around the 14th of Nov and was fixed about 10 days later (oom-420/441 a couple other ones). Thank you /michael From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@li
Re: [onap-discuss] Issue in ONAP Amsterdam release installation
Thanks Ruijung. How to fix this issue or if it’s from ONAP side ,when this issue will be fixed so that we can start deployment again. Regards, Pavithra From: Guo, Ruijing <ruijing@intel.com> Date: 12 December 2017 at 7:58:08 AM IST To: Borislav Glozman <borislav.gloz...@amdocs.com>, Michael O'Brien <frank.obr...@amdocs.com>, Pavithra R13 <pavithra_...@infosys.com>, onap-discuss@lists.onap.org <onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Hi, I can deploy ONAP using kubeadm + k8s 1.7.11 + helm 2.7.2 + oom with 2 or 3 pods not working before. Recently, ONAP has some regression: 1. 73 Running: vagrant@onap:~$ kubectl get pods --all-namespaces | grep onap | grep Run | wc 73 4388176 2. 6 not Running (I think aai & sdc are regression) vagrant@onap:~$ kubectl get pods --all-namespaces | grep onap | grep -v Run onap-aai aai-service-749944520-rq3hj 0/1 Init:0/11231d onap-aai aai-traversal-2843093465-twsz70/2 Init:0/11241d onap-kube2msb kube2msb-registrator-4293827076-pl5kh 0/1 CrashLoopBackOff2691d onap-portal vnc-portal-3680188324-55m5r 0/1 Init:2/51221d onap-sdc sdc-be-754421819-x9z030/2 ImageInspectError 0 1d onap-sdc sdc-fe-902103934-s92q10/2 Init:0/11241d Thanks, -Ruijing -Original Message- From: onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13 Sent: Tuesday, December 12, 2017 10:11 AM To: Michael O'Brien <frank.obr...@amdocs.com>; Borislav Glozman <borislav.gloz...@amdocs.com>; onap-discuss@lists.onap.org Subject: Re: [onap-discuss] Issue in ONAP Amsterdam release installation Hi Brien We downloaded the latest oom and were able to proceed but now the fe and be of SDC , vnc portal and dmaap, global Kafka of message router are not coming up due to error "search line limits were exceeded. Some dns names were omitted". We have Internet access without any firewall and we have configured google dns in resolv.conf . So kindly help us in resolving this issue . Regards Pavithra From: Michael O'Brien <frank.obr...@amdocs.com> Date: 11 December 2017 at 7:39:58 PM IST To: Pavithra R13 <pavithra_...@infosys.com>, Borislav Glozman <borislav.gloz...@amdocs.com>, onap-discuss@lists.onap.org <onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Pavithra, I have it backwards - jetlag. You are OK for helm 2.3 - it is just as Borislav said - your repo is very old - that change occurred around the 14th of Nov and was fixed about 10 days later (oom-420/441 a couple other ones). Thank you /michael From: onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Michael O'Brien Sent: Monday, December 11, 2017 08:56 To: Borislav Glozman <borislav.gloz...@amdocs.com>; Pavithra R13 <pavithra_...@infosys.com>; onap-discuss@lists.onap.org Subject: Re: [onap-discuss] Issue in ONAP Amsterdam release installation Pavithra, Hi, the instructions are in the wiki and they mention to stay on helm 2.3 - see the script there or use/view the 2 rancher and cd.sh scripts to setup your system Manual https://wiki.onap.org/display/DW/ONAP+on+Kubernetes#ONAPonKubernetes-QuickstartInstallation Almost Automatic https://wiki.onap.org/display/DW/ONAP+on+Kubernetes#ONAPonKubernetes-AutomatedInstallation Thank you /michael From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Borislav Glozman Sent: Monday, December 11, 2017 07:22 To: Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] Issue in ONAP Amsterdam release installation Hi, Please add [oom] in subject. Please pull the latest oom code, tpl was removed from log/templates/kibana-deployment.yaml in order to support helm 2.3 Thanks, Borislav Glozman O:+972.9.776.1988 M:+972.52.2835726 From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13 Sent: Thursday, November 23, 2017 2:01 PM To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: [onap-discuss] Issue in ONAP Amsterdam release installation Hi, We are trying to setup ONAP Amsterdam release and we are facing the below error
Re: [onap-discuss] Issue in ONAP Amsterdam release installation
Hi Brien We downloaded the latest oom and were able to proceed but now the fe and be of SDC , vnc portal and dmaap, global Kafka of message router are not coming up due to error “search line limits were exceeded. Some dns names were omitted”. We have Internet access without any firewall and we have configured google dns in resolv.conf . So kindly help us in resolving this issue . Regards Pavithra From: Michael O'Brien <frank.obr...@amdocs.com> Date: 11 December 2017 at 7:39:58 PM IST To: Pavithra R13 <pavithra_...@infosys.com>, Borislav Glozman <borislav.gloz...@amdocs.com>, onap-discuss@lists.onap.org <onap-discuss@lists.onap.org> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Pavithra, I have it backwards – jetlag. You are OK for helm 2.3 – it is just as Borislav said – your repo is very old – that change occurred around the 14th of Nov and was fixed about 10 days later (oom-420/441 a couple other ones). Thank you /michael From: onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Michael O'Brien Sent: Monday, December 11, 2017 08:56 To: Borislav Glozman <borislav.gloz...@amdocs.com>; Pavithra R13 <pavithra_...@infosys.com>; onap-discuss@lists.onap.org Subject: Re: [onap-discuss] Issue in ONAP Amsterdam release installation Pavithra, Hi, the instructions are in the wiki and they mention to stay on helm 2.3 – see the script there or use/view the 2 rancher and cd.sh scripts to setup your system Manual https://wiki.onap.org/display/DW/ONAP+on+Kubernetes#ONAPonKubernetes-QuickstartInstallation Almost Automatic https://wiki.onap.org/display/DW/ONAP+on+Kubernetes#ONAPonKubernetes-AutomatedInstallation Thank you /michael From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Borislav Glozman Sent: Monday, December 11, 2017 07:22 To: Pavithra R13 <pavithra_...@infosys.com<mailto:pavithra_...@infosys.com>>; onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: Re: [onap-discuss] Issue in ONAP Amsterdam release installation Hi, Please add [oom] in subject. Please pull the latest oom code, tpl was removed from log/templates/kibana-deployment.yaml in order to support helm 2.3 Thanks, Borislav Glozman O:+972.9.776.1988 M:+972.52.2835726 From: onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13 Sent: Thursday, November 23, 2017 2:01 PM To: onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org> Subject: [onap-discuss] Issue in ONAP Amsterdam release installation Hi, We are trying to setup ONAP Amsterdam release and we are facing the below error during log component installation(./createAll.bash -n onap -a log). Error: parse error in "log/templates/kibana-deployment.yaml": template: log/templates/kibana-deployment.yaml:71: function "tpl" not defined The command helm returned with error code 1 Kindly help us in resolving the issue. Thanks & Regards, Pavithra R This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at https://www.amdocs.com/about/email-disclaimer This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at https://www.amdocs.com/about/email-disclaimer This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at https://www.amdocs.com/about/email-disclaimer ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
Re: [onap-discuss] [oom] Issue in ONAP Amsterdam release installation
Hi We downloaded the latest oom and were able to proceed but now the fe and be of SDC , vnc portal and dmaap, global Kafka of message router are not coming up due to error “search line limits were exceeded. Some dns names were omitted”. We have Internet access without any firewall and we have configured google dns in resolv.conf . So kindly help us in resolving this issue . Regards Pavithra From: Borislav Glozman <borislav.gloz...@amdocs.com> Date: 11 December 2017 at 5:54:01 PM IST To: onap-discuss@lists.onap.org <onap-discuss@lists.onap.org>, Pavithra R13 <pavithra_...@infosys.com> Subject: RE: [onap-discuss] Issue in ONAP Amsterdam release installation Hi, Please add [oom] in subject. These workings you mentioned are not important and can be ignored. They are related to some Rancher bug that is supposed to be fixed. Thanks, Borislav Glozman O:+972.9.776.1988 M:+972.52.2835726 From: onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Pavithra R13 Sent: Monday, December 11, 2017 1:38 PM To: onap-discuss@lists.onap.org Subject: [onap-discuss] Issue in ONAP Amsterdam release installation Hi All While trying to install ONAP Amsterdam release we are facing issue in bringing up message router(dmaap, global-kafka), vnc portal and sdc(be, fe) containers. The error is “searchline limits were exceeded, some dns names have been omitted.” We have prepulled 1.1.10 branch and using v1.6.10 of rancher and 2.3 version of helm. We have set nameserver as 8.8.8.8 in /etc/resolv.conf. Please find attached screen shot of error and kindly help us in resolving the issue. Thanks & Regards, Pavithra R This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement, you may review at https://www.amdocs.com/about/email-disclaimer ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss
[onap-discuss] Issue in ONAP Amsterdam release installation
Hi, We are trying to setup ONAP Amsterdam release and we are facing the below error during log component installation(./createAll.bash -n onap -a log). Error: parse error in "log/templates/kibana-deployment.yaml": template: log/templates/kibana-deployment.yaml:71: function "tpl" not defined The command helm returned with error code 1 Kindly help us in resolving the issue. Thanks & Regards, Pavithra R ___ onap-discuss mailing list onap-discuss@lists.onap.org https://lists.onap.org/mailman/listinfo/onap-discuss