Re: iferror -38
Mike, I tried to disable nops. But the issue still persists. So what else can be the reason for this? It became show stopper. Thanks Chava On Jan 28, 12:35 pm, Mike Christie micha...@cs.wisc.edu wrote: chava45wrote: Mike , Can you also let me know if there is any workaround on this issue? Yeah, if this is the bug I thought I fixed then you can just turn off nops. Are you using dm-multipath? They are mostly useful for fast failovers when using multipath. You can turn them off by setting node.conn[0].timeo.noop_out_interval = 0 node.conn[0].timeo.noop_out_timeout = 0 in /etc/iscsi/iscsid.conf, then redoing the discovery command (iscsiadm -m discovery -t st -p ip). Or you can set this for already setup nodes by doing iscsiadm -m node -o update -n node.conn[0].timeo.noop_out_interval -v 0 iscsiadm -m node -o update -n node.conn[0].timeo.noop_out_timeout -v 0 (note if you do this you still want to set it in iscsid.conf so new targets that are discovered will get the new setting). On Jan 28, 10:42 am,chava45ssch...@gmail.com wrote: Mike , In response to the following update by you... --- Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here. ------ Could you let me know once you test it? I am stuck up here and can not move forward with Oracle RAC installation on Oracle VM. Thanks Chava On Jan 28, 9:35 am, Mike Christie micha...@cs.wisc.edu wrote: chava45wrote: Mike, Here is the log information from /var/log/messages. ---- Jan 27 14:02:04 rac1 iscsid: iSCSI logger with pid=4380 started! Jan 27 14:02:05 rac1 iscsid: transport class version 2.0-724. iscsid version 2.0-868 Jan 27 14:02:05 rac1 iscsid: iSCSI daemon with pid=4381 started! Jan 27 14:03:02 rac1 kernel: scsi1 : iSCSI Initiator over TCP/IP Jan 27 14:03:03 rac1 kernel: Vendor: OPNFILER Model: VIRTUAL- DISK Rev: 0 Jan 27 14:03:03 rac1 kernel: Type: Direct- Access ANSI SCSI revision: 04 Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 iscsid: received iferror -38 Jan 27 14:03:03 rac1 last message repeated 2 times Jan 27 14:03:03 rac1 iscsid: connection2:0 is operational now Jan 27 14:03:06 rac1 udevd-event[4401]: wait_for_sysfs: waiting for '/ sys/devices/platform/host1/session2/target1:0:0/1:0:0:0/ioerr_cnt' failed Jan 27 14:03:13 rac1 kernel: sda:3ping timeout of 5 secs expired, last rx 47558, last ping 48808, now 50058 Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here.- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text - --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: iferror -38
Mike , What else could be the reason for it? it became showstopper. thanks Chava On Jan 28, 12:35 pm, Mike Christie micha...@cs.wisc.edu wrote: chava45 wrote: Mike , Can you also let me know if there is any workaround on this issue? Yeah, if this is the bug I thought I fixed then you can just turn off nops. Are you using dm-multipath? They are mostly useful for fast failovers when using multipath. You can turn them off by setting node.conn[0].timeo.noop_out_interval = 0 node.conn[0].timeo.noop_out_timeout = 0 in /etc/iscsi/iscsid.conf, then redoing the discovery command (iscsiadm -m discovery -t st -p ip). Or you can set this for already setup nodes by doing iscsiadm -m node -o update -n node.conn[0].timeo.noop_out_interval -v 0 iscsiadm -m node -o update -n node.conn[0].timeo.noop_out_timeout -v 0 (note if you do this you still want to set it in iscsid.conf so new targets that are discovered will get the new setting). On Jan 28, 10:42 am, chava45 ssch...@gmail.com wrote: Mike , In response to the following update by you... --- Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here. ------ Could you let me know once you test it? I am stuck up here and can not move forward with Oracle RAC installation on Oracle VM. Thanks Chava On Jan 28, 9:35 am, Mike Christie micha...@cs.wisc.edu wrote: chava45wrote: Mike, Here is the log information from /var/log/messages. ---- Jan 27 14:02:04 rac1 iscsid: iSCSI logger with pid=4380 started! Jan 27 14:02:05 rac1 iscsid: transport class version 2.0-724. iscsid version 2.0-868 Jan 27 14:02:05 rac1 iscsid: iSCSI daemon with pid=4381 started! Jan 27 14:03:02 rac1 kernel: scsi1 : iSCSI Initiator over TCP/IP Jan 27 14:03:03 rac1 kernel: Vendor: OPNFILER Model: VIRTUAL- DISK Rev: 0 Jan 27 14:03:03 rac1 kernel: Type: Direct- Access ANSI SCSI revision: 04 Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 iscsid: received iferror -38 Jan 27 14:03:03 rac1 last message repeated 2 times Jan 27 14:03:03 rac1 iscsid: connection2:0 is operational now Jan 27 14:03:06 rac1 udevd-event[4401]: wait_for_sysfs: waiting for '/ sys/devices/platform/host1/session2/target1:0:0/1:0:0:0/ioerr_cnt' failed Jan 27 14:03:13 rac1 kernel: sda:3ping timeout of 5 secs expired, last rx 47558, last ping 48808, now 50058 Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here.- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text - --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: iferror -38
chava45 wrote: Mike , What else could be the reason for it? it became showstopper. What is the error you get now? Could you send the logs? If you see this: ping timeout of 5 secs expired then you do not have nops off. Could you also do a quick test with iet (it is the target used in open filer I think): http://iscsitarget.sourceforge.net/ I attached a ietd.conf that will export some virtual luns. Just install iet from the tarball, then copy the ietd.conf to /etc. Then do service iscsi-target start, and try to login again. thanks Chava On Jan 28, 12:35 pm, Mike Christie micha...@cs.wisc.edu wrote: chava45 wrote: Mike , Can you also let me know if there is any workaround on this issue? Yeah, if this is the bug I thought I fixed then you can just turn off nops. Are you using dm-multipath? They are mostly useful for fast failovers when using multipath. You can turn them off by setting node.conn[0].timeo.noop_out_interval = 0 node.conn[0].timeo.noop_out_timeout = 0 in /etc/iscsi/iscsid.conf, then redoing the discovery command (iscsiadm -m discovery -t st -p ip). Or you can set this for already setup nodes by doing iscsiadm -m node -o update -n node.conn[0].timeo.noop_out_interval -v 0 iscsiadm -m node -o update -n node.conn[0].timeo.noop_out_timeout -v 0 (note if you do this you still want to set it in iscsid.conf so new targets that are discovered will get the new setting). On Jan 28, 10:42 am, chava45 ssch...@gmail.com wrote: Mike , In response to the following update by you... --- Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here. ------ Could you let me know once you test it? I am stuck up here and can not move forward with Oracle RAC installation on Oracle VM. Thanks Chava On Jan 28, 9:35 am, Mike Christie micha...@cs.wisc.edu wrote: chava45wrote: Mike, Here is the log information from /var/log/messages. ---- Jan 27 14:02:04 rac1 iscsid: iSCSI logger with pid=4380 started! Jan 27 14:02:05 rac1 iscsid: transport class version 2.0-724. iscsid version 2.0-868 Jan 27 14:02:05 rac1 iscsid: iSCSI daemon with pid=4381 started! Jan 27 14:03:02 rac1 kernel: scsi1 : iSCSI Initiator over TCP/IP Jan 27 14:03:03 rac1 kernel: Vendor: OPNFILER Model: VIRTUAL- DISK Rev: 0 Jan 27 14:03:03 rac1 kernel: Type: Direct- Access ANSI SCSI revision: 04 Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 iscsid: received iferror -38 Jan 27 14:03:03 rac1 last message repeated 2 times Jan 27 14:03:03 rac1 iscsid: connection2:0 is operational now Jan 27 14:03:06 rac1 udevd-event[4401]: wait_for_sysfs: waiting for '/ sys/devices/platform/host1/session2/target1:0:0/1:0:0:0/ioerr_cnt' failed Jan 27 14:03:13 rac1 kernel: sda:3ping timeout of 5 secs expired, last rx 47558, last ping 48808, now 50058 Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here.- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text - --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~--- # Example iscsi target configuration # # Everything until the first target definition belongs # to the global configuration. # Right now this is only the user configuration used # during discovery sessions. IncomingUser specifies credentials the # initiator has to provide - several of these are supported. If mutual # CHAP shall be employed, OutgoingUser specifies the user/pass # combination the target will provide - only one is supported. # Leave them alone (keep them commented out) if you don't want to use # authentication for discovery sessions. #iSNSServer 192.168.1.16 #iSNSAccessControl No #IncomingUser joe secret #OutgoingUser jack 12charsecret # Targets definitions
Re: iferror -38
Mike , Can you also let me know if there is any workaround on this issue? On Jan 28, 10:42 am, chava45 ssch...@gmail.com wrote: Mike , In response to the following update by you... --- Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here. ------ Could you let me know once you test it? I am stuck up here and can not move forward with Oracle RAC installation on Oracle VM. Thanks Chava On Jan 28, 9:35 am, Mike Christie micha...@cs.wisc.edu wrote: chava45wrote: Mike, Here is the log information from /var/log/messages. ---- Jan 27 14:02:04 rac1 iscsid: iSCSI logger with pid=4380 started! Jan 27 14:02:05 rac1 iscsid: transport class version 2.0-724. iscsid version 2.0-868 Jan 27 14:02:05 rac1 iscsid: iSCSI daemon with pid=4381 started! Jan 27 14:03:02 rac1 kernel: scsi1 : iSCSI Initiator over TCP/IP Jan 27 14:03:03 rac1 kernel: Vendor: OPNFILER Model: VIRTUAL- DISK Rev: 0 Jan 27 14:03:03 rac1 kernel: Type: Direct- Access ANSI SCSI revision: 04 Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 iscsid: received iferror -38 Jan 27 14:03:03 rac1 last message repeated 2 times Jan 27 14:03:03 rac1 iscsid: connection2:0 is operational now Jan 27 14:03:06 rac1 udevd-event[4401]: wait_for_sysfs: waiting for '/ sys/devices/platform/host1/session2/target1:0:0/1:0:0:0/ioerr_cnt' failed Jan 27 14:03:13 rac1 kernel: sda:3ping timeout of 5 secs expired, last rx 47558, last ping 48808, now 50058 Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here.- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text - --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: iferror -38
chava45 wrote: Mike , Can you also let me know if there is any workaround on this issue? Yeah, if this is the bug I thought I fixed then you can just turn off nops. Are you using dm-multipath? They are mostly useful for fast failovers when using multipath. You can turn them off by setting node.conn[0].timeo.noop_out_interval = 0 node.conn[0].timeo.noop_out_timeout = 0 in /etc/iscsi/iscsid.conf, then redoing the discovery command (iscsiadm -m discovery -t st -p ip). Or you can set this for already setup nodes by doing iscsiadm -m node -o update -n node.conn[0].timeo.noop_out_interval -v 0 iscsiadm -m node -o update -n node.conn[0].timeo.noop_out_timeout -v 0 (note if you do this you still want to set it in iscsid.conf so new targets that are discovered will get the new setting). On Jan 28, 10:42 am, chava45 ssch...@gmail.com wrote: Mike , In response to the following update by you... --- Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here. ------ Could you let me know once you test it? I am stuck up here and can not move forward with Oracle RAC installation on Oracle VM. Thanks Chava On Jan 28, 9:35 am, Mike Christie micha...@cs.wisc.edu wrote: chava45wrote: Mike, Here is the log information from /var/log/messages. ---- Jan 27 14:02:04 rac1 iscsid: iSCSI logger with pid=4380 started! Jan 27 14:02:05 rac1 iscsid: transport class version 2.0-724. iscsid version 2.0-868 Jan 27 14:02:05 rac1 iscsid: iSCSI daemon with pid=4381 started! Jan 27 14:03:02 rac1 kernel: scsi1 : iSCSI Initiator over TCP/IP Jan 27 14:03:03 rac1 kernel: Vendor: OPNFILER Model: VIRTUAL- DISK Rev: 0 Jan 27 14:03:03 rac1 kernel: Type: Direct- Access ANSI SCSI revision: 04 Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 iscsid: received iferror -38 Jan 27 14:03:03 rac1 last message repeated 2 times Jan 27 14:03:03 rac1 iscsid: connection2:0 is operational now Jan 27 14:03:06 rac1 udevd-event[4401]: wait_for_sysfs: waiting for '/ sys/devices/platform/host1/session2/target1:0:0/1:0:0:0/ioerr_cnt' failed Jan 27 14:03:13 rac1 kernel: sda:3ping timeout of 5 secs expired, last rx 47558, last ping 48808, now 50058 Either you are hitting the bug I thought I fixed or these nops are really timing out. I am downloading open filer now to test it out here.- Hide quoted text - - Show quoted text -- Hide quoted text - - Show quoted text - --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: iferror -38
Mike, iscsi: registered transport iscsi_tcp is not showing up in /var/log/ messages and here is the output of tail -f /var/log/messages when the service iscsid start is executed /var/log/messages/ output -------- Jan 22 19:24:24 rac1 iscsid: iSCSI logger with pid=4135 started! Jan 22 19:24:25 rac1 iscsid: transport class version 2.0-724. iscsid version 2.0-868 Jan 22 19:24:25 rac1 iscsid: iSCSI daemon with pid=4136 started! Jan 22 19:24:27 rac1 iscsid: received iferror -38 Jan 22 19:24:27 rac1 last message repeated 2 times Jan 22 19:24:27 rac1 iscsid: connection1:0 is operational after recovery (1 attempts) Jan 22 19:24:37 rac1 kernel: ping timeout of 5 secs expired, last rx 4294947132, last ping 4294948382, now 4294949638 Jan 22 19:24:37 rac1 kernel: connection1:0: iscsi: detected conn error (1011) Jan 22 19:24:37 rac1 kernel: sd 0:0:0:0: SCSI error: return code = 0x000e Jan 22 19:24:37 rac1 kernel: end_request: I/O error, dev sda, sector 0 Jan 22 19:24:37 rac1 kernel: Buffer I/O error on device sda, logical block 0 Jan 22 19:24:38 rac1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Jan 22 19:24:40 rac1 iscsid: received iferror -38 Jan 22 19:24:40 rac1 last message repeated 2 times Jan 22 19:24:40 rac1 iscsid: connection1:0 is operational after recovery (1 attempts) Jan 22 19:24:50 rac1 kernel: ping timeout of 5 secs expired, last rx 4294950394, last ping 4294951644, now 4294952894 Jan 22 19:24:50 rac1 kernel: connection1:0: iscsi: detected conn error (1011) Jan 22 19:24:51 rac1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Jan 22 19:24:53 rac1 iscsid: received iferror -38 Jan 22 19:24:53 rac1 last message repeated 2 times Jan 22 19:24:53 rac1 iscsid: connection1:0 is operational after recovery (1 attempts) Jan 22 19:25:03 rac1 kernel: ping timeout of 5 secs expired, last rx 4294953651, last ping 4294954901, now 4294956151 Jan 22 19:25:03 rac1 kernel: connection1:0: iscsi: detected conn error (1011) Jan 22 19:25:04 rac1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Jan 22 19:25:06 rac1 iscsid: received iferror -38 Jan 22 19:25:06 rac1 last message repeated 2 times Jan 22 19:25:06 rac1 iscsid: connection1:0 is operational after recovery (1 attempts) Jan 22 19:25:16 rac1 kernel: ping timeout of 5 secs expired, last rx 4294956907, last ping 4294958157, now 4294959407 Jan 22 19:25:16 rac1 kernel: connection1:0: iscsi: detected conn error (1011) Jan 22 19:25:17 rac1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Jan 22 19:25:19 rac1 iscsid: session [iqn.2006-01.com.openfiler:tsn. 61b3375e9b1d,10.98.1.101,3260] already running. Jan 22 19:25:20 rac1 iscsid: received iferror -38 Jan 22 19:25:20 rac1 last message repeated 2 times Jan 22 19:25:20 rac1 iscsid: connection1:0 is operational after recovery (1 attempts) Jan 22 19:25:29 rac1 kernel: ping timeout of 5 secs expired, last rx 4294960203, last ping 4294961454, now 4294962704 Jan 22 19:25:29 rac1 kernel: connection1:0: iscsi: detected conn error (1011) Jan 22 19:25:30 rac1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Jan 22 19:25:33 rac1 iscsid: received iferror -38 Jan 22 19:25:33 rac1 last message repeated 2 times Jan 22 19:25:33 rac1 iscsid: connection1:0 is operational after recovery (1 attempts) Jan 22 19:25:42 rac1 kernel: ping timeout of 5 secs expired, last rx 4294963460, last ping 4294964710, now 4294965960 Jan 22 19:25:42 rac1 kernel: connection1:0: iscsi: detected conn error (1011) Jan 22 19:25:43 rac1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Jan 22 19:25:46 rac1 iscsid: received iferror -38 Jan 22 19:25:46 rac1 last message repeated 2 times Jan 22 19:25:46 rac1 iscsid: connection1:0 is operational after recovery (1 attempts) Jan 22 19:25:55 rac1 kernel: ping timeout of 5 secs expired, last rx 4294966716, last ping 670, now 1920 Jan 22 19:25:55 rac1 kernel: connection1:0: iscsi: detected conn error (1011) Jan 22 19:25:55 rac1 kernel: sd 0:0:0:0: SCSI error: return code = 0x000e Jan 22 19:25:55 rac1 kernel: end_request: I/O error, dev sda, sector 0 Jan 22 19:25:55 rac1 kernel: Buffer I/O error on device sda, logical block 0 Jan 22 19:25:56 rac1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Jan 22 19:25:59 rac1 iscsid: received iferror -38 Jan 22 19:25:59 rac1 last message repeated 2 times Jan 22 19:25:59 rac1 iscsid: connection1:0 is operational after recovery (1 attempts) Jan 22 19:26:08 rac1 kernel: ping timeout of 5 secs expired, last rx 2677, last ping 3927, now 5177 Jan 22 19:26:08 rac1 kernel: connection1:0: iscsi: detected conn error (1011) Jan 22 19:26:09 rac1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) Jan 22 19:26:12 rac1 iscsid: received iferror -38 Jan 22 19:26:12 rac1 last message repeated 2
Re: iferror -38
chava45 wrote: Mike, iscsi: registered transport iscsi_tcp is not showing up in /var/log/ messages and here is the output of tail -f /var/log/messages when the service iscsid start is executed /var/log/messages/ output Is this in response to my question to try and make sure that we are starting up cleanly? So before you do service iscsi start, do a ps -u root | grep iscsid to make sure it is not running. If it is running do a serivce iscsi stop. Then do a ls /sys/class/iscsi_session to make sure everything is cleaned up. If it is not, stop here and give me the output of the ls command and do a ls /sys/class/iscsi_connection. Next, if there are not sessions running start iscsid by hand. # iscsid Then run iscsiadm to check out what targets are setup # iscsiadm -m node (you should see iqn.2006-01.com.openfiler:tsn.61b3375e9b1d) Then log in by hand: # iscsiadm -m node -T iqn.2006-01.com.openfiler:tsn.61b3375e9b1d -l Then send me the logs. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: iferror -38
Mike, Here is the log information from /var/log/messages. Jan 27 14:02:04 rac1 iscsid: iSCSI logger with pid=4380 started! Jan 27 14:02:05 rac1 iscsid: transport class version 2.0-724. iscsid version 2.0-868 Jan 27 14:02:05 rac1 iscsid: iSCSI daemon with pid=4381 started! Jan 27 14:03:02 rac1 kernel: scsi1 : iSCSI Initiator over TCP/IP Jan 27 14:03:03 rac1 kernel: Vendor: OPNFILER Model: VIRTUAL- DISK Rev: 0 Jan 27 14:03:03 rac1 kernel: Type: Direct- Access ANSI SCSI revision: 04 Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 kernel: SCSI device sda: 1048576 512-byte hdwr sectors (537 MB) Jan 27 14:03:03 rac1 kernel: sda: Write Protect is off Jan 27 14:03:03 rac1 kernel: SCSI device sda: drive cache: write through Jan 27 14:03:03 rac1 iscsid: received iferror -38 Jan 27 14:03:03 rac1 last message repeated 2 times Jan 27 14:03:03 rac1 iscsid: connection2:0 is operational now Jan 27 14:03:06 rac1 udevd-event[4401]: wait_for_sysfs: waiting for '/ sys/devices/platform/host1/session2/target1:0:0/1:0:0:0/ioerr_cnt' failed Jan 27 14:03:13 rac1 kernel: sda:3ping timeout of 5 secs expired, last rx 47558, last ping 48808, now 50058 Jan 27 14:03:13 rac1 kernel: connection2:0: iscsi: detected conn error (1011) Jan 27 14:03:14 rac1 iscsid: Kernel reported iSCSI connection 2:0 error (1011) state (3) Jan 27 14:03:16 rac1 iscsid: received iferror -38 Jan 27 14:03:16 rac1 last message repeated 2 times Jan 27 14:03:16 rac1 iscsid: connection2:0 is operational after recovery (1 attempts) Jan 27 14:03:26 rac1 kernel: ping timeout of 5 secs expired, last rx 50814, last ping 52064, now 53314 Jan 27 14:03:26 rac1 kernel: connection2:0: iscsi: detected conn error (1011) Jan 27 14:03:27 rac1 iscsid: Kernel reported iSCSI connection 2:0 error (1011) state (3) Jan 27 14:03:29 rac1 iscsid: received iferror -38 Jan 27 14:03:29 rac1 last message repeated 2 times Jan 27 14:03:29 rac1 iscsid: connection2:0 is operational after recovery (1 attempts) Jan 27 14:03:39 rac1 kernel: ping timeout of 5 secs expired, last rx 54071, last ping 55321, now 56571 Jan 27 14:03:39 rac1 kernel: connection2:0: iscsi: detected conn error (1011) Jan 27 14:03:40 rac1 iscsid: Kernel reported iSCSI connection 2:0 error (1011) state (3) Jan 27 14:03:42 rac1 iscsid: received iferror -38 Jan 27 14:03:42 rac1 last message repeated 2 times Jan 27 14:03:42 rac1 iscsid: connection2:0 is operational after recovery (1 attempts) Jan 27 14:03:52 rac1 kernel: ping timeout of 5 secs expired, last rx 57327, last ping 58577, now 59827 Jan 27 14:03:52 rac1 kernel: connection2:0: iscsi: detected conn error (1011) Jan 27 14:03:53 rac1 iscsid: Kernel reported iSCSI connection 2:0 error (1011) state (3) Jan 27 14:03:55 rac1 iscsid: received iferror -38 Jan 27 14:03:55 rac1 last message repeated 2 times Jan 27 14:03:55 rac1 iscsid: connection2:0 is operational after recovery (1 attempts) Jan 27 14:04:05 rac1 kernel: ping timeout of 5 secs expired, last rx 60583, last ping 61833, now 63083 Jan 27 14:04:05 rac1 kernel: connection2:0: iscsi: detected conn error (1011) Jan 27 14:04:06 rac1 iscsid: Kernel reported iSCSI connection 2:0 error (1011) state (3) Jan 27 14:04:08 rac1 iscsid: received iferror -38 Jan 27 14:04:08 rac1 last message repeated 2 times Jan 27 14:04:08 rac1 iscsid: connection2:0 is operational after recovery (1 attempts) -- Thanks Chava On Jan 27, 10:33 am, Mike Christie micha...@cs.wisc.edu wrote: chava45 wrote: Mike, iscsi: registered transport iscsi_tcp is not showing up in /var/log/ messages and here is the output of tail -f /var/log/messages when the service iscsid start is executed /var/log/messages/ output Is this in response to my question to try and make sure that we are starting up cleanly? So before you do service iscsi start, do a ps -u root | grep iscsid to make sure it is not running. If it is running do a serivce iscsi stop. Then do a ls /sys/class/iscsi_session to make sure everything is cleaned up. If it is not, stop here and give me the output of the ls command and do a ls /sys/class/iscsi_connection. Next, if there are not sessions running start iscsid by hand. # iscsid Then run iscsiadm to check out what targets are setup # iscsiadm -m node (you should see iqn.2006-01.com.openfiler:tsn.61b3375e9b1d) Then log in by hand: # iscsiadm -m node -T iqn.2006-01.com.openfiler:tsn.61b3375e9b1d -l Then send me the logs. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi
Re: iferror -38
chava45 wrote: Mike, Thank you for your fast response. I have tried installing the following rpm kernel-xen-2.6.18-128.el5.i686.rpm . But it did not help. Do we need to do any additional things after installing that rpm? i did rpm -Uvh kernel-xen-2.6.18-128.el5.i686.rpm on Cent 5.2 But it could not help. After you do rpm -Uvh you need to reboot into the new kernel. Did you do that? What are the error messages you get now (oh yeah the iferror -38 can be ignored it just means userspace tried to set a feature that did not exist in the kernel and the feature is not critical). Could you send everything too? Send the log info from where you see something about iscsi tcp being registered to the errors you sent before. --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---
Re: iferror -38
Mike, Thank you for your fast response. I have tried installing the following rpm kernel-xen-2.6.18-128.el5.i686.rpm . But it did not help. Do we need to do any additional things after installing that rpm? i did rpm -Uvh kernel-xen-2.6.18-128.el5.i686.rpm on Cent 5.2 But it could not help. Thanks Chava Mike Christie wrote: chava45 wrote: I have created two virtual machines with oracle VM which is Xen based VM and installed openfiler 2.3 on one VM and Centos 5.2 on another VM as iscsi client which has iscsi initiator. Is the 5.3 kernel out yet? If not could you try this kernel http://people.redhat.com/dzickus/el5/128.el5/ --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups open-iscsi group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~--~~~~--~~--~--~---