Re: [qmailtoaster] Re: Outlook goes offline in every 10 min
What is the way to reload the dovecot setting changes? Eric Shubert e...@shubes.net wrote: On 01/16/2014 02:01 AM, Linux wrote: Hi All, I am still facing this problem. I change the outlook sync setting manually to checking the mails. Restart qmailctl also restart my server. But no luck. I am facing this issue from last month. Regards, Vivek Patil system admin How many imap users do you have? Have you added a value for mail_max_userip_connections in your /etc/dovecot/local.conf file? What value do you have? Did you restart dovecot after changing dovecot settings? (qmailctl doesn't do anything with dovecot) -- -Eric 'shubes' - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] courier to dovecot conversion
On 5/11/2013 11:28 PM, Myers, Jon W wrote: So I'm getting ready to do this conversion, read through http://wiki.qmailtoaster.com/index.php/Replacing_Courier_IMAP_with_Dovecot_IMAP a few times... but I noticed something... it says to stop qmail and courier: First we need to stop Courier IMAP: # cd /var/qmail/supervise # touch imap4/down imap4/log/down # touch imap4-ssl/down imap4-ssl/log/down # service qmail stop do all the changes, then start everything back up: # service qmail start # chkconfig dovecot on # service dovecot start won't service qmail start also restart courier? Where am I telling it NOT to run courier? just by creating those down files? Thats what I'm thinking, but just wanted to make sure before doing the conversion, and didnt want courier to pop in there and play with the maildirs after the convert... Correctcourier is run from daemontools, not the normal sysvinit scripts, so creating those down files signals daemontools that these services are not to run. Jeremy - To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Spamdyke install problem
This did the trick or because I waited longer. I see it is done this morning and I started it 3 days ago. Is that remotely normal? Roughly 100 domains but verying number of users per domain. Jeremy On 4/20/2011 10:58 PM, Eric Shubert wrote: The spamdyke test takes quite a while if you have a large graylist tree, which you would have if you're running an older version that didn't install the qtp-prune-graylist script for you. There's not a whole lot of space used in the graylist tree, but there can be huge numbers of inodes accumulated over time. I would: # yum update qmailtoaster-plus.repo # yum update qmailtoaster-plus # qtp-prune-graylist (this will take quite a while, perhaps a couple hours - just let it run) # qtp-install-spamdyke - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Spamdyke install problem
I have been trying to install spamdyke after the last update for a while now with no success. Below is how far I get with 2 different servers. Server 1 strip spamdyke qtp-install-spamdyke v0.3.3 - installing spamdyke-4.2.0 ... qtp-install-spamdyke v0.3.3 - running spamdyke config test ... Server 2 strip spamdyke qtp-install-spamdyke v0.3.3 - installing spamdyke-4.2.0 ... qtp-install-spamdyke v0.3.3 - running spamdyke config test ... spamdyke 4.2.0+TLS+CONFIGTEST+DEBUG (C)2011 Sam Clippinger, samc (at) silence (dot) org http://www.spamdyke.org/ Use -h for an option summary or see README.html for complete option details. SUCCESS: Running tests as user vpopmail(89), group vchkpw(89). SUCCESS: /var/qmail/bin/qmail-smtpd appears to offer TLS support but spamdyke will intercept and decrypt the TLS traffic so all of its filters can operate. SUCCESS: /var/qmail/bin/qmail-smtpd appears to offer SMTP AUTH support. spamdyke will observe any authentication and trust its response. SUCCESS(config-file): Opened for reading: /etc/spamdyke/spamdyke.conf SUCCESS(dns-resolv-conf): Opened for reading: /etc/resolv.conf Jeremy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Spamdyke install problem
Here is the qtp-whatami qtp-whatami v0.3.7 Wed Apr 20 21:35:28 EDT 2011 DISTRO=CentOS OSVER=4.9 QTARCH=i686 QTKERN=2.6.9-34.EL BUILD_DIST=cnt40 BUILD_DIR=/usr/src/redhat This machine's OS is supported and has been tested I have stopped the install because I am shelled in with my laptop and have to goto work. I have tried a reboot and install even with qmail stopped but still is stuck the next day. The problem seems to be only server 1. The other completed this time tonight. Jeremy On 4/20/2011 9:26 PM, Scott Hughes wrote: Jeremy, Please run qtp-whatami and post the output. Also, how does the install end? Does it lock up? Does it end with a message of some type? I assume you have rebooted and then tried to install it again? Thanks, Scott On Apr 20, 2011, at 8:01 PM, Jeremy Townejto...@turtlehut.com wrote: I have been trying to install spamdyke after the last update for a while now with no success. Below is how far I get with 2 different servers. Server 1 strip spamdyke qtp-install-spamdyke v0.3.3 - installing spamdyke-4.2.0 ... qtp-install-spamdyke v0.3.3 - running spamdyke config test ... Server 2 strip spamdyke qtp-install-spamdyke v0.3.3 - installing spamdyke-4.2.0 ... qtp-install-spamdyke v0.3.3 - running spamdyke config test ... spamdyke 4.2.0+TLS+CONFIGTEST+DEBUG (C)2011 Sam Clippinger, samc (at) silence (dot) org http://www.spamdyke.org/ Use -h for an option summary or see README.html for complete option details. SUCCESS: Running tests as user vpopmail(89), group vchkpw(89). SUCCESS: /var/qmail/bin/qmail-smtpd appears to offer TLS support but spamdyke will intercept and decrypt the TLS traffic so all of its filters can operate. SUCCESS: /var/qmail/bin/qmail-smtpd appears to offer SMTP AUTH support. spamdyke will observe any authentication and trust its response. SUCCESS(config-file): Opened for reading: /etc/spamdyke/spamdyke.conf SUCCESS(dns-resolv-conf): Opened for reading: /etc/resolv.conf Jeremy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Forcing TLS on port 587
On Thu, Feb 3, 2011 at 1:54 PM, Eric Shubert e...@shubes.net wrote: I'd be very careful with this one, CJ. You need to keep 25 open for incoming (inter-domain) mail. ;) If QMT doesn't have the patch for the FORCE_TLS option, it'd be nice if it did. This is something I'd also like to see on the submission instance of qmail-smtp. Can you round up that patch? If you can give it a try, that'd be great. If not, please post here where to get it so someone (hopefully other than Jake) can give it a shot to see if it clashes with any other patches we're using. I did some additional searching around, and unfortunately, I couldn't find anyplace that had *JUST* this patch. It's part of the version 6 and above of John Simpson's qmail mega-patch, as documented at: http://qmail.jms1.net/patches/combined-details.shtml near the bottom of the page. *A self-written patch to add a real FORCE_TLS capability, for those who want a non-SSL server but don't want it to be able to accept mail without STARTTLS happening first. Creating an envrionment variable called FORCE_TLS with a numeric value greater than zero enables this behaviour. I'm not all that much of a C coder, but I might be able to try next week to possibly port this patch into the qmail-toaster SRPM. I scanned the big patch, and it honestly looks like there's only about 5 lines of changes involved with the FORCE_TLS coding. It would take me a lot of work however, and it might be quite easy for one of you who has better coding capability to pick out what's involved to implement this option. If I do get a chance to play with it and make it work, I'll certainly contribute the patch back to the project! Thanks! Jeremy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Forcing TLS on port 587
Hello everyone! We're using a toaster installation for our primary mail server at my company, and over the last few weeks we've been working on configuring everyone's mail clients to use SSL for sending receiving e-mail. Now that we have everyone converted over to use of SSL, we'd like to stop all non-SSL access. For imap and pop3, it was quite simple, I simply disabled the imap4 and pop3 run scripts in /var/qmail/supervise. However, for SMTP, I haven't had much luck yet. We'd like to force the submission port 587 to require TLS and SMTP-Auth before a message is sent out., while leaving SMTP port 25 un-modified. I had read on another qmail site that you could do this by use of a FORCE_TLS=1 variable in the run script, but that did not work, so I suspect that this patch is not in the toaster packages (and running strings against /var/qmail/bin/qmail-smtpd seems to bear that out). Is there any way with the toaster to enforce TLS usage, and reject any mail that's not TLS. We'd like to stick with TLS so we don't have to reconfigure everyone's mail clients for SMTPS, which is deprecated at any rate. Thanks for any help you all can give! Jeremy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: 110 Can't open SMTP stream
On 3/16/2010 11:14 AM, Eric Shubert wrote: qmailtoaster wrote: Hi all, When my clients try to send mails, they receive time to time (but more and more): Message not sent. Server replied: Connection timed out 110 Can't open SMTP stream. The value of concurrency incoming is [r...@mail send]# more /var/qmail/control/concurrencyincoming 100 The netstat shows a lot of smtp connection in status SYN_RECV: [r...@mail send]# netstat -a|grep smtp |grep SYN_RECV|wc -l 435 [r...@mail send]# netstat -a|grep smtp |grep SYN_RECV|wc -l The server only relay local mail: [r...@mail send]# more /etc/tcprules.d/tcp.smtp 127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,R BLSMTPD=,NOP0FCHECK=1,QMAILQUEUE=/var/qmail/bin/simscan 192.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,R BLSMTPD=,NOP0FCHECK=1,QMAILQUEUE=/var/qmail/bin/simscan 01.02.03.04:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/pri vate,RBLSMTPD=,NOP0FCHECK=1,QMAILQUEUE=/var/qmail/bin/simscan :allow,BADMIMETYPE=,SENDER_NOCHECK=1,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT =50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,DKSIGN =/var /qmail/control/domainkeys/%/private,NOP0FCHECK=1 Nothings change in the mail or server configuration since weeks... What can be the cause... and how to avoid the connections timeout? Thx in advance!, Christian - Which port are they submitting to? Are you running spamdyke? I'm guessing 25, and yes. If so, does # ps -ef | grep defunct show a lot of defunct qmail-smtpd processes? I have a bunch of defunct qmail-smtpd what is the right way to clean them up? Jeremy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] AOL and other's Issue
I did an update to our qmailtoaster server last week and now I am not receiving email from AOL and a few other's. I think all that was updated was ClamAV QmailToaster UCSPI-TCP- Maybe Spamassassin I don't even see AOL getting to any qmail log files. I had to creat a free AOL email account just so I could test/fix this problem. Jeremy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: AOL and other's Issue
Eric Shubert wrote: Jeremy Towne wrote: I did an update to our qmailtoaster server last week and now I am not receiving email from AOL and a few other's. I think all that was updated was ClamAV QmailToaster UCSPI-TCP- Maybe Spamassassin I don't even see AOL getting to any qmail log files. I had to creat a free AOL email account just so I could test/fix this problem. Jeremy - If you used qtp-newmodel to update, you'll find a list of the packages that were updated in /usr/src/qtp-upgrade/SRPMS directory, and the corresponding log directory will contain the log from the build. Are you running spamdyke? If so, you'll need to re-install it after upgrading the qmail-toaster package. Not receiving email from AOL is a strange problem to be having though. You should see some sort of evidence of contact in the smtp log: # qmlog -lc aol smtp Thank you for your help. It looks like a re-install fixed it. I had installed spamdyke a long time ago but disabled it. Does that make sense that a re-install would fix it? I had disabled spamdyke because the email complaints of people not getting there email became ridiculous. Jeremy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: AOL and other's Issue
Eric Shubert wrote: Jeremy Towne wrote: Eric Shubert wrote: Jeremy Towne wrote: I did an update to our qmailtoaster server last week and now I am not receiving email from AOL and a few other's. I think all that was updated was ClamAV QmailToaster UCSPI-TCP- Maybe Spamassassin I don't even see AOL getting to any qmail log files. I had to creat a free AOL email account just so I could test/fix this problem. Jeremy - If you used qtp-newmodel to update, you'll find a list of the packages that were updated in /usr/src/qtp-upgrade/SRPMS directory, and the corresponding log directory will contain the log from the build. Are you running spamdyke? If so, you'll need to re-install it after upgrading the qmail-toaster package. Not receiving email from AOL is a strange problem to be having though. You should see some sort of evidence of contact in the smtp log: # qmlog -lc aol smtp Thank you for your help. It looks like a re-install fixed it. I had installed spamdyke a long time ago but disabled it. Does that make sense that a re-install would fix it? I had disabled spamdyke because the email complaints of people not getting there email became ridiculous. Jeremy - You're welcome. It's hard to say why a re-install might have fixed the problem. Are you still not running spamdyke? Which RBLs are you using? I am using dns-blacklist-entry=list.dsbl.org dns-blacklist-entry=combined.njabl.org it looks like. Jeremy - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] rbl check after smtp auth ?
What if the email is coming from a cell phone with pocket PC? I can't change the port. Jeremy Jake Vickers wrote: Mesut Güler wrote: hi list.. sometimes users need to use smtp server out of office. and if they tries to send email via smtp, rblcheck blocks them during smtp connection cos of dynamic ip range. if i allow dyamic ip range, mailboxes get full of so many spams.. shortly it is possible to configure qmt to check rbl if no auth to smtp??.. if a user auths, so no rblcheck and can send emails via smtp. sorry for bad english. i hope i could explain.. If they use port 587 instead of port 25, it will skip the RBL checks. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Share tokens created for sa-learn
Is there a way to train spamassassin with sa-learn and then copy those tokens to other servers? Thanks. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] router email to remote host per user
I need a little guidance. I am hosting a domain for a company on a qmailtoaster. They recently purchased an Exchange server because they needed some of its features. But they only purchased a limited number of licenses. I would like the qmailtoaster to recieve email for all users but forward mail for users with an exchange account to the exchange server. I've searched some and found a patch moresmtproutes but there is not much documentation on this. An suggestions. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] router email to remote host per user
I need a little guidance. I am hosting a domain for a company on a qmailtoaster. They recently purchased an Exchange server because they needed some of its features. But they only purchased a limited number of licenses. I would like the qmailtoaster to recieve email for all users but forward mail for users with an exchange account to the exchange server. I've searched some and found a patch moresmtproutes but there is not much documentation on this. An suggestions. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] BTW, the exchange server is located at another site. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] forward setup in qmailadmin spam
If a user has there email setup to forward and save a copy on the server does the email being forwarded get scanned for spam? It appears to not be from what I see in the logs. If not is there anyway I can. Jeremy - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Blackberry problem
I have a user with a Blackberry problem. They can send email to anyone except there own domain from there blackberry. Outlook and webmail works just fine. delivery status div class=moz-text-flowed style=font-family: -moz-fixedFinal-Recipient: rfc822;[EMAIL PROTECTED] (this is fake on here) Action: failed Status: 5.0.0 (permanent failure) Remote-MTA: dns; [mail server IP] Diagnostic-Code: smtp; 5.1.0 - Unknown address error 571-'sorry, sender address has invalid format (#5.7.1 - chkuser)' (delivery attempts: 0) Reporting-MTA: dns; smtp03.bis.na.blackberry.com /div I was wondering if it has anything to do with the rfc822; in front of the email address. Jeremy - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Blackberry problem
This is what the bounce email shows. The following message to [EMAIL PROTECTED] was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 571-'sorry, sender address has invalid format (#5.7.1 - chkuser)' Jeremy Towne wrote: I have a user with a Blackberry problem. They can send email to anyone except there own domain from there blackberry. Outlook and webmail works just fine. delivery status div class=moz-text-flowed style=font-family: -moz-fixedFinal-Recipient: rfc822;[EMAIL PROTECTED] (this is fake on here) Action: failed Status: 5.0.0 (permanent failure) Remote-MTA: dns; [mail server IP] Diagnostic-Code: smtp; 5.1.0 - Unknown address error 571-'sorry, sender address has invalid format (#5.7.1 - chkuser)' (delivery attempts: 0) Reporting-MTA: dns; smtp03.bis.na.blackberry.com /div I was wondering if it has anything to do with the rfc822; in front of the email address. Jeremy - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Blackberry problem
So I want to add na.blackberry.com:allow,RELAYCLIENT=,SENDER_NOCHECK=1 Jeremy Jean-Paul van de Plasse wrote: Yes the problem is the chkuser sender check. You need to add SENDER_NOCHECK=1 to your tcprules file, for either the mailservers from blackberry or for your default rule. JP - Original Message - From: Jeremy Towne [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, August 08, 2007 1:56 PM Subject: Re: [qmailtoaster] Blackberry problem This is what the bounce email shows. The following message to [EMAIL PROTECTED] was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 571-'sorry, sender address has invalid format (#5.7.1 - chkuser)' Jeremy Towne wrote: I have a user with a Blackberry problem. They can send email to anyone except there own domain from there blackberry. Outlook and webmail works just fine. delivery status div class=moz-text-flowed style=font-family: -moz-fixedFinal-Recipient: rfc822;[EMAIL PROTECTED] (this is fake on here) Action: failed Status: 5.0.0 (permanent failure) Remote-MTA: dns; [mail server IP] Diagnostic-Code: smtp; 5.1.0 - Unknown address error 571-'sorry, sender address has invalid format (#5.7.1 - chkuser)' (delivery attempts: 0) Reporting-MTA: dns; smtp03.bis.na.blackberry.com /div I was wondering if it has anything to do with the rfc822; in front of the email address. Jeremy - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] qtp-newmodel upgrade - vpopmail - send-emails fails
If you tail the install/build log tail -f /opt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log you will see what it is aborting on. I just fixed error by error as they came up. Below is what I had to install by hand before the qtp-newmodel would install with no errors. So far all is working for me. The source rpm's should already be downloaded from starting your install. rpmbuild --rebuild --with cnt40 /usr/src/qtp-upgrade/SRPMS/vpopmail-toaster-5.4.17-1.3.4.src.rpm rpm -Uvh /usr/src/redhat/RPMS/i386/vpopmail-toaster-5.4.13-1.3.3.i686.rpm rpmbuild --rebuild --with cnt40 /usr/src/qtp-upgrade/SRPMS/qmail-toaster-1.03-1.3.15.src.rpm rpm -Uvh /usr/src/redhat/RPMS/i386/qmail-toaster-1.03-1.3.15.i386.rpm rpmbuild --rebuild --with cnt40 /usr/src/qtp-upgrade/SRPMS/courier-authlib-toaster-0.59.2-1.3.6.src.rpm rpm -Uvh /usr/src/redhat/RPMS/i386/courier-authlib-toaster-0.59.2-1.3.6.i386.rpm rpmbuild --rebuild --with cnt40 /usr/src/qtp-upgrade/SRPMS/simscan-toaster-1.3.1-1.3.6.src.rpm rpm -Uvh /usr/src/redhat/RPMS/i386/simscan-toaster-1.3.1-1.3.6.i386.rpm It appears the install order is wrong. Jeremy Jake Vickers wrote: Harry Zink wrote: On Apr 23, 2007, at 8:56 AM, Kevin Katz wrote: For those following this post - if your upgrade fails due to current-newmodel.txt being in alphabetical order instead of build order, Could this, please, be fixed, asap? Eric Shubes is the one who wrote/maintains this part of QTP (qtp-upgrade). Give him some time - he started a new job a couple months back that is very demanding. If nothing else, I'll remove qtp-upgrade from the next QTP release and move back to the old upgrade script. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] restricting email from certain senders
I have been asked to host the email for a local boyscout troop. The troop master would like to limit the group from only being able to send and receive email from each other. Is this possible? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] restricting email from certain senders
But there are other domains on the server. I don't want to affect other domains. Erik A. Espinoza wrote: Sounds like a job for iptables, block incoming and outgoing port 25. Write a script that will clear the outgoing queue. On 5/17/07, Jeremy Runner [EMAIL PROTECTED] wrote: I have been asked to host the email for a local boyscout troop. The troop master would like to limit the group from only being able to send and receive email from each other. Is this possible? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] qtp-menu
[EMAIL PROTECTED] wrote: Did I misinterpret some of the previous posts or is there an ungrade option in qtp-menu. I don't see it, only backup, restore, spam, You should uninstall v0.1 and install v0.2. See the wiki. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] The older version had an option to install rules de jour, the newer version has the option to run it only? It that correct? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] qtp-menu
Did I misinterpret some of the previous posts or is there an ungrade option in qtp-menu. I don't see it, only backup, restore, spam, - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Suexec apache2 qmailadmin
I'm using Virtualmin to do web hosting. It creates the httpd.conf as
follows using suexec.
VirtualHost 192.168.1.2:80
SuexecUserGroup #501 #500
ServerName mydomain.com
ServerAlias www.mydomain.com
DocumentRoot /home/mydomain/public_html
ErrorLog /home/mydomain/logs/error_log
CustomLog /home/mydomain/logs/access_log common
ScriptAlias /cgi-bin/ /home/mydomain/cgi-bin/
Directory /home/mydomain/public_html
Options Indexes FollowSymLinks ExecCGI
allow from all
AllowOverride All
/Directory
Directory /home/mydomain/cgi-bin
allow from all
/Directory
/VirtualHost
All scripts must reside in /home/{somedomain}. If I put the scripts in
a folder belonging to that domain, only that domain will be able to use
it. I would like to be able to run the qmailadmin scripts from all
domains but I haven't figured out how to make it work yet with suexec.
Eric Shubes wrote:
I gotta say, I don't understand the problem here.
I have two domains on a toaster. I can get to qmailadmin via
http://domain1.com/qmailtoaster and/or http://domain2.com/qmailtoaster. I
can log into either domain using the url from either one.
I've (simply) set up virtual domains in httpd.conf for each one, and they
just work.
So what's the problem? (What am I missing?)
Nolan Garrett wrote:
I don't know if this helps or not, but in my case I was required to
rename qmailadmin to index.cgi, and change it's ownership to vpopmail
and vchkpw. This user and group was given a UID and GID 500. Also, I
had to recompile suexec using the directions from the link below so that
I could execute out of /usr/share/qmailadmin.
http://weblog.massivegeek.com/modules.php?name=Newsfile=articlesid=67
Nolan
Jeremy Runner wrote:
That didn't work. I think you have to set SuexecUserGroup to which
user you want to have access but this is set in the VirtualHost directive.
I found this link but I'm not sure if it applies.
http://www.shupp.org/toaster/trustix_notes.eml.html
Quinn Comendant wrote:
Do you know if it is possible to disable suexec for one specific site? In my
opinion it is safe to run qmailadmin under user apache/www/nobody.
Otherwise, it should work to copy the /usr/share/qmailadmin directory to
/var/www/qmailadmin and adjust the paths in /etc/httpd/conf/toaster.conf
accordingly. I don't think suexec will let you run it through a symlink.
Quinn
-
Strangecode :: Internet Consultancy
http://www.strangecode.com/
+1 530 624 4410
On Mon, 13 Nov 2006 19:05:48 -0600, Jeremy Runner wrote:
Now that I have qmailtoaster running and doing so well, I'm trying
to get qmailadmin working. I have apache2 configured with suexec.
All cgi scripts have to be in /var/www and a virtual host has to be
configured to set SuexecUserGroup to run cgi scripts. How can I get
qmailadmin working in this environment so that it will be available
for all virtual domains I have and not just one. Hope I'm not too
confusing.
-
QmailToaster hosted by: VR Hosted http://www.vr.org
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] upgrade script
How safe is it to run the upgrade script on a production server. I would to upgrade to the latest packages but I'm a little nervous. Thanks. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Suexec apache2 qmailadmin
Now that I have qmailtoaster running and doing so well, I'm trying to get qmailadmin working. I have apache2 configured with suexec. All cgi scripts have to be in /var/www and a virtual host has to be configured to set SuexecUserGroup to run cgi scripts. How can I get qmailadmin working in this environment so that it will be available for all virtual domains I have and not just one. Hope I'm not too confusing. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Suexec apache2 qmailadmin
That didn't work. I think you have to set SuexecUserGroup to which user you want to have access but this is set in the VirtualHost directive. I found this link but I'm not sure if it applies. http://www.shupp.org/toaster/trustix_notes.eml.html Quinn Comendant wrote: Do you know if it is possible to disable suexec for one specific site? In my opinion it is safe to run qmailadmin under user apache/www/nobody. Otherwise, it should work to copy the /usr/share/qmailadmin directory to /var/www/qmailadmin and adjust the paths in /etc/httpd/conf/toaster.conf accordingly. I don't think suexec will let you run it through a symlink. Quinn - Strangecode :: Internet Consultancy http://www.strangecode.com/ +1 530 624 4410 On Mon, 13 Nov 2006 19:05:48 -0600, Jeremy Runner wrote: Now that I have qmailtoaster running and doing so well, I'm trying to get qmailadmin working. I have apache2 configured with suexec. All cgi scripts have to be in /var/www and a virtual host has to be configured to set SuexecUserGroup to run cgi scripts. How can I get qmailadmin working in this environment so that it will be available for all virtual domains I have and not just one. Hope I'm not too confusing. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] QmailToaster integration WebControl panel?
Jake Vickers wrote: Ryan Gibbons wrote: This is a question, not a statement :) Is there any integration of qmailtoaster into a Web Control Panel, I'm specifically looking at DTC - http://gplhost.com/software-dtc.html Details : I have been looking at a open-source web control panel for my server. I am getting tired of making all edits by hand, and being able to give even the basic controls to the webmaster for any given domain. Most of the ones I see want to either use a standard install of a service and then they customize it, even DTC seems to be this way (I haven't installed it, but I am asking a similar question on the other side to be sure). So if you have integrated Qmail Toaster into a general Web Hosting Panel. Or has someone modified some of the QmailToaster Panels to manage other services (primarily apache and an ftp server, though DNS would be another nice addition). Let me know. I had offered about a year or so ago to help Gorrand (I think that was his name) integrate Toaster into his DTC package, but never really got any replies except for that Qmail was in a repo for Debian. At the time his stuff did not install hardly at all on Redhat, so I decided I wouldn't volunteer for any extra work. If his stuff has been fixed to install on RH, I'll download it and see if it can incorporate (unless you've already tried). - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] I'm using the Virtualmin module for Webmin and it seems to be working fine. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] QmailToaster integration WebControl panel?
Jake Vickers wrote: Ryan Gibbons wrote: This is a question, not a statement :) Is there any integration of qmailtoaster into a Web Control Panel, I'm specifically looking at DTC - http://gplhost.com/software-dtc.html Details : I have been looking at a open-source web control panel for my server. I am getting tired of making all edits by hand, and being able to give even the basic controls to the webmaster for any given domain. Most of the ones I see want to either use a standard install of a service and then they customize it, even DTC seems to be this way (I haven't installed it, but I am asking a similar question on the other side to be sure). So if you have integrated Qmail Toaster into a general Web Hosting Panel. Or has someone modified some of the QmailToaster Panels to manage other services (primarily apache and an ftp server, though DNS would be another nice addition). Let me know. I had offered about a year or so ago to help Gorrand (I think that was his name) integrate Toaster into his DTC package, but never really got any replies except for that Qmail was in a repo for Debian. At the time his stuff did not install hardly at all on Redhat, so I decided I wouldn't volunteer for any extra work. If his stuff has been fixed to install on RH, I'll download it and see if it can incorporate (unless you've already tried). - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] I'm using the Virtualmin module for Webmin and it seems to be working fine. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] badmailfrom
What is the purpose of the info below in the badmailfrom file. I could not receive or send for one of the domains I created until I removed the info. .*\ @.* [EMAIL PROTECTED] .*%.* Thanks. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] slow pop3 logins
I did try the fix with the run file and it didn't work for me. But I did get it fixed. Once I got bind working for localhost, 127, and x.1.168.192 and with forwarders to my ISP dns servers it is working fine. I just don't understand why I had to have this. I had a previous qmailtoaster install running for a couple of years that worked flawlessly and I never installed bind or djbdns?? Anyways it's working now. Thanks for the help.. Eric Shubes wrote: That's certainly worth a shot, but I'd consider that a remedy instead of a fix. If adding the -H flag improves things, I would think then that reverse DNS is certainly the problem. I don't know enough about configuring (bind or djbdns) off hand to tell you how to fix it. Perhaps someone else here does. Do some digging, and I'm sure you can find a solution. Google is your friend. ;) slamp slamp wrote: did you try Craig Smith's solution for the same issue he was having? From: Craig Smith [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Reply-To: qmailtoaster-list@qmailtoaster.com Subject: RE: [qmailtoaster] Slow pop3 login Date: Mon, 6 Nov 2006 11:30:13 - X-Mailer: Microsoft Office Outlook 11 Is this problem still occuring? Sorry I've read most of the posts, and I see the dns related items may be at fault,however there may be another cause. I had this same problem when I first setup my box, it worked great, but pop3 authentication took just over 2 mins. It turns out it was a setting in the run file. I don't see any mention of checking the run file so I thought I would let you know just in case. original run is/was as follows. #!/bin/sh PASSPROG=/home/vpopmail/bin/vchkpw HOSTNAME=`hostname --fqdn` exec /usr/bin/softlimit -m 900 \ /usr/bin/tcpserver -v -R -c 200 0 110 \ /var/qmail/bin/qmail-popup $HOSTNAME \ $PASSPROG /var/qmail/bin/qmail-pop3d Maildir 21 I changed mine to #!/bin/sh PASSPROG=/home/vpopmail/bin/vchkpw HOSTNAME=hostname exec /usr/bin/softlimit -m 900 \ /usr/bin/tcpserver -l0 -H -v -R -c 200 0 110 \ /var/qmail/bin/qmail-popup $HOSTNAME \ $PASSPROG /var/qmail/bin/qmail-pop3d Maildir 21 I added the -l0 and the -H as I had read on several groups about the slow response. I believe the -H tells pop3 not to perform reverse dns or something similar. That was the general consensus for sorting out the slow response, and in my case it worked a charm. Try adding the -H to /var/qmail/supervise/pop3/run contents. As ever make a copy before editing. ;-) I hope that helps. On 11/6/06, Michael Amster [EMAIL PROTECTED] wrote: Like I asked other people, do you have reverse DNS working for that server? Looks like no: [EMAIL PROTECTED] ~]# dig ccws01.computerconcept.net ; DiG 9.3.2 ccws01.computerconcept.net ;; global options: printcmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NOERROR, id: 22742 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ccws01.computerconcept.net.IN A ;; ANSWER SECTION: ccws01.computerconcept.net. 83199 INA 65.83.25.10 ;; Query time: 11 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Nov 6 15:55:41 2006 ;; MSG SIZE rcvd: 60 [EMAIL PROTECTED] ~]# dig 65.83.25.10 ; DiG 9.3.2 65.83.25.10 ;; global options: printcmd ;; Got answer: ;; -HEADER- opcode: QUERY, status: NOERROR, id: 60193 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;65.83.25.10. IN A ;; ANSWER SECTION: 65.83.25.10.655360 IN A 65.83.25.10 ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Nov 6 15:55:53 2006 ;; MSG SIZE rcvd: 45 Jeremy Runner wrote: Eric Shubes wrote: [EMAIL PROTECTED] wrote: Can someone try to telnet in my qmailtoaster just to experience the slow login I am referring to. telnet ccws01.computerconcept.net 110 Make sure you grab a snack first. Thanks. [EMAIL PROTECTED] ~]$ time telnet ccws01.computerconcept.net 110 Trying 65.83.25.10... Connected to ccws01.computerconcept.net (65.83.25.10). Escape character is '^]'. +OK [EMAIL PROTECTED] quit +OK Connection closed by foreign host. real1m40.689s user0m0.016s sys 0m0.008s [EMAIL PROTECTED] ~]$ Note, I got Connected message right away, but it took well over a minute to come up with the first +OK. FWIW, it appears that you're not replying to ping. Might want to open that up for troubleshooting. It looks to me though like it's getting there just fine. What's happening between the Connected... and +OK though? That's where your problem lies. Exactly. That's what I've seen. I have installed on 2 different machines with the exact same problem Would this still be dns problem? I didn't think so but thats the only area where I know I have a problem
[qmailtoaster] slow pop3 logins
Can someone try to telnet in my qmailtoaster just to experience the slow login I am referring to. telnet ccws01.computerconcept.net 110 Make sure you grab a snack first. Thanks. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] slow pop3 logins
Eric Shubes wrote: [EMAIL PROTECTED] wrote: Can someone try to telnet in my qmailtoaster just to experience the slow login I am referring to. telnet ccws01.computerconcept.net 110 Make sure you grab a snack first. Thanks. [EMAIL PROTECTED] ~]$ time telnet ccws01.computerconcept.net 110 Trying 65.83.25.10... Connected to ccws01.computerconcept.net (65.83.25.10). Escape character is '^]'. +OK [EMAIL PROTECTED] quit +OK Connection closed by foreign host. real1m40.689s user0m0.016s sys 0m0.008s [EMAIL PROTECTED] ~]$ Note, I got Connected message right away, but it took well over a minute to come up with the first +OK. FWIW, it appears that you're not replying to ping. Might want to open that up for troubleshooting. It looks to me though like it's getting there just fine. What's happening between the Connected... and +OK though? That's where your problem lies. Exactly. That's what I've seen. I have installed on 2 different machines with the exact same problem Would this still be dns problem? I didn't think so but thats the only area where I know I have a problem. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Slow pop3 login
I have just installed qmailtoaster and all seemed to go well. But logging in takes a long time. Like if I do telnet my.server.com 110, it can take 2 1/2 minutes before I get the welcome and login prompt. Once logged in all is fine. If I log in via Squirrelmail everything is normal. What could be causing these extremely slow logins. All of my email clients time out before login. Thanks. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Slow pop3 login
Yes. I installed dbjdns local-cache. My resolv.conf looks like: search mydomain.com nameserver 127.0.0.1 nameserver 192.168.1.1 nameserver 205.152.132.23 nameserver 205.152.37.23 Erik Espinoza wrote: Did you configure a local DNS server and point your resolv.conf to 127.0.0.1? On 11/5/06, Jeremy Runner [EMAIL PROTECTED] wrote: I have just installed qmailtoaster and all seemed to go well. But logging in takes a long time. Like if I do telnet my.server.com 110, it can take 2 1/2 minutes before I get the welcome and login prompt. Once logged in all is fine. If I log in via Squirrelmail everything is normal. What could be causing these extremely slow logins. All of my email clients time out before login. Thanks. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Slow pop3 login
http://www.lifewithdjbdns.com/#dnscache It is _only_ a recursive resolver; unlike BIND it never returns authoritative data, and it never returns data that was not retrieved directly from an authoritative nameserver, whose authority it had proven by tracing the chain of NS delegations from its configured roots. BTW is accurate as an introduction, but is not telling you can't forward. Forwarding means being a cache of a cache, and dnscache has this funcionality Seems to me that if dnscache can only return authoritative data by tracing the chain of NS delegations from it's roots, then it can't ever be a cache of a cache. The upstream servers should always return not authoritative and point further upstream or to the roots. If this isn't the behavior that djbdns does, then the documentation is just wrong. Thanks for the link you provided, I will use that next time I think there is a problem relating to DNS and the user claims to be using djbdns. Erik - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] I may be completely wrong but I'm not sure that it's a dns problem. I don't have any trouble resolving names from the server. The problem is when a client tries to access the server. I've tried stopping iptables and that doesn't make a difference.??? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Slow pop3 login
Should I be checking my private ip 192.168.1.x or public. I don't have a static public ip and the private doesn't resolve. nslookup 192.168.1.x ;; Warning: ID mismatch: expected ID 45307, got 0 Server: 205.152.132.23 Address:205.152.132.23#53 ** server can't find x.1.168.192.in-addr.arpa: SERVFAIL Erik Espinoza wrote: Paste the output of nslookup ipaddress on Windows or Linux Erik On 11/5/06, Jeremy Runner [EMAIL PROTECTED] wrote: How can I check reverse dns. My server is behind a Linksys router. It does nat and dns. Erik Espinoza wrote: Qmail doesnt' check with /etc/hosts. Sounds like you may not have reverse dns entries, Does the machine you are connecting from have reverse dns? Is it on the same 192.x subnet? On 11/5/06, Jeremy Runner [EMAIL PROTECTED] wrote: If I telnet localhost 110 from the server I gain access immediately. But if I use IP or hostname it takes forever from the server or from the clients. I have checked hostname, /etc/hosts??? It eventually does work but after a few minutes. [EMAIL PROTECTED] wrote: [Server] Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 10.0.0.0* 255.255.255.0 U 0 00 eth0 192.168.1.0 * 255.255.255.0 U 0 00 eth0 default 192.168.1.1 0.0.0.0 UG0 00 eth0 [Client-XP] Active Routes: Network DestinationNetmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.10030 127.0.0.0255.0.0.0127.0.0.1 127.0.0.11 192.168.0.0255.255.255.0 192.168.0.3 192.168.0.320 192.168.0.3 255.255.255.255127.0.0.1 127.0.0.120 192.168.0.255 255.255.255.255 192.168.0.3 192.168.0.320 192.168.1.0255.255.255.0192.168.1.100 192.168.1.10030 192.168.1.100 255.255.255.255127.0.0.1 127.0.0.130 192.168.1.255 255.255.255.255192.168.1.100 192.168.1.10030 224.0.0.0240.0.0.0 192.168.0.3 192.168.0.320 224.0.0.0240.0.0.0192.168.1.100 192.168.1.10030 255.255.255.255 255.255.255.255 192.168.0.3 21 255.255.255.255 255.255.255.255 192.168.0.3 192.168.0.31 255.255.255.255 255.255.255.255192.168.1.100 192.168.1.1001 Default Gateway: 192.168.1.1 === Persistent Routes: None So this two machines are in the same subnet 192.168.1. How much it take If you make a telnet my.domain.com 110 from the server. Try with my.domain.com and with the IP. Do you use NAT? Does my.domain.com resolves to 192.168.1.XXX (being this the IP of the mail server) or a public IP? - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org
RE: [qmailtoaster] problems with local email
/var/qmail/control/me has x.mydomain.com which is correct. /var/qmail/control/plusdomain also has x.mydomain.com. -Original Message- From: Eric Shubes [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 17, 2006 6:35 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] problems with local email Jeremy Runner wrote: I have a server with domain mydomain.com hosting email. I have another server with domain x.mydomain.com running qmailtoaster hosting email. Anytime email are generated locally such as from logs emails are created as [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] instead of [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]. I have checked /etc/hosts but cannot figure out how to get qmailtoaster to use @x.mydomain.com as address. Any help would be appreciated. What's in /var/qmail/control/me ? -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] QT-Plus package
snipJake and I are putting together a QT-Plus package (in very early development). It would have been nice to include it. /snip nice! i offer myself as a beta tester! jeremy
Re: [qmailtoaster] Clamav and SpamAssassin not working?
i had nothing but problems when i built qmailtoaster on my SLES 10 box. Johannes had built a script that eventually worked for me, that actually installed everything properly and ran my toaster fine. I would just need the okay from Johannes to pass that on to you. I didnt write it, so im not sure if i can forward it. Jer - Original Message - From: aledr To: qmailtoaster-list@qmailtoaster.com Sent: Saturday, August 26, 2006 9:21 AM Subject: [qmailtoaster] Clamav and SpamAssassin not working? Good day!!I installed qmail-toaster on a SuSE Linux Enterprise Server 10, with the sus10164 flag.But seems that Clamav and SpamAssassin are not working...I sent a mail with eicar virus text file and *.pif files and qmail-toaster allows it.The file /var/qmail/control/simcontrol is as default and Clamav is up to date.What should I do know?Regards-- [ ]'sAledr - Alexandre"OpenSource Solutions for SmallBusiness Problems"
Re: [qmailtoaster] qmail and iptables
wheres port 110 in the rules? i dont see it - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Saturday, August 26, 2006 4:07 PM Subject: Re: [qmailtoaster] qmail and iptables Aaron Bliss wrote: Hi everyone, I'm having some trouble with iptables blocking incoming mail; I'm not sure where it's getting blocked, as I'm able to telenet to port 25; any idea what is wrong with my rules? Thanks. Aaron *filter :INPUT ACCEPT [1217:129358] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [847:246130] -A INPUT -p tcp -m tcp --dport 53 -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 25 -j ACCEPT -A INPUT -p tcp -m tcp --dport 143 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT COMMIT That looks a bit loose to me, but I don't see why smtp wouldn't be getting through. What makes you think it's the firewall? If you stop iptables, does mail come through? -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] DSPAM with QMT
I tired a few times and was unsuccesful in the sorting properly. When i would forward the spam to spam@ it wouldnt actually do anything. And it took me over a week to figure it out even how to install it. It would be nice to have a step by step HOWTO w/ qmailtoaster but someone would have to troubleshoot and figure it out thats on teh dev team jer Hello Friends, Anyone is using or have experience using DSPAM with QMT? Best Regards Cleber Saad- QmailToaster hosted by: VR Hosted - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] autolearn=unavailable
Its seems that whenever i get an email from mud.yahoo.com it comes in as autolearn=unavailable. This is turn never delievers the message. Is there a fix for this, other than turning off the autolearn feature. I see its working, cause i do get alot of autolearn=ham and autolearn=spam, its the unvailable that never get delivered, hecki dont even know where they are going, i cant see them anyway. regards jeremy
Re: [qmailtoaster] where oh where is ma mail
thanks.. have made the changes, ill see if that helps. jer - Original Message - From: Tim Mancour [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, August 16, 2006 8:46 AM Subject: RE: [qmailtoaster] where oh where is ma mail Jeremy, I had a problem in the past where the From header was incorrect and the domainkey verification dropped the Email (also without a log message). Assuming that you have implemented domainkey, I would disable verification and see if that allows you to receive the Email. In the /etc/tcprules.d/tcp.smtp files delete the DKVERIFY variable then qmailctl stop, cdb and then start. Regards, Tim -Original Message- From: jeremy [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 16, 2006 1:44 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] where oh where is ma mail and here is another one: smtpd: @400044e2b06b1b9220dc CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt : sender accepted @400044e2b06b2172957c CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt [EMAIL PROTECTED] : found existing recipient @400044e2b06c2b691b14 simscan:[7871]:CLEAN (1.40/6.00):1.1634s:[Nia_TForumList] Re_ newsletter:216.210.230.236:[EMAIL PROTECTED]:[EMAIL PROTECTED] spamd: @400044e2b06c2b67e294 [7580] info: spamd: clean message (1.4/5.0) for clamav:89 in 0.7 seconds, 7814 bytes. @400044e2b06c2b67ea64 [7580] info: spamd: result: . 1 - AWL,BAYES_00,BE_BOSS,FORGED_YAHOO_RCVD,HTML_40_50,HTML_MESSAGE,HTML_NONELEME NT_40_50 scantime=0.7,size=7814,user=clamav,uid=89,required_score=5.0,rhost=localhost ,raddr=127.0.0.1,rport=22978,mid=[EMAIL PROTECTED] ud.yahoo.com,rmid=[EMAIL PROTECTED],bayes=2.22044604925031e-16,aut olearn=no @400044e2b06c2b684ff4 [7522] info: prefork: child states: II - Original Message - From: jeremy [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:39 PM Subject: Re: [qmailtoaster] where oh where is ma mail Guess I spoke too soon! Here it is again... these both arrive at the same time.. i was watching both windows. smtpd log: @400044e2ae55388951ec CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt : sender accepted @400044e2ae5606db8034 CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt [EMAIL PROTECTED] : found existing recipient @400044e2ae570e97ec7c simscan:[7676]:CLEAN (1.40/6.00):1.1262s:[Nia_TForumList] Re_ newsletter:216.210.230.236:[EMAIL PROTECTED]:[EMAIL PROTECTED] spamd log: @400044e2aeae371518dc [7522] info: prefork: child states: II @400044e2af7901b124c4 [7580] info: spamd: connection from localhost [127.0.0.1] at port 29048 @400044e2af7901b1307c [7580] info: spamd: processing message [EMAIL PROTECTED] aka [EMAIL PROTECTED] for clamav:89 @400044e2af790cad4aec [7580] info: spamd: clean message (1.4/5.0) for clamav:89 in 0.7 seconds, 7814 bytes. @400044e2af790cad6644 [7580] info: spamd: result: . 1 - AWL,BAYES_00,BE_BOSS,FORGED_YAHOO_RCVD,HTML_40_50,HTML_MESSAGE,HTML_NONELEME NT_40_50 scantime=0.7,size=7814,user=clamav,uid=89,required_score=5.0,rhost=localhost ,raddr=127.0.0.1,rport=29048,mid=[EMAIL PROTECTED] ud.yahoo.com,rmid=[EMAIL PROTECTED],bayes=5.55111512312578e-17,aut olearn=no @400044e2af790cad75e4 [7522] info: prefork: child states: II - Original Message - From: jeremy [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:30 PM Subject: Re: [qmailtoaster] where oh where is ma mail eric, thanks for the kudos about the list! thats why its there isnt it? I was talking with EE on IRC and he told me how to flush my queue, so it SEEMS to have stopped that error/infinate loop. Ill let you know if i see it again... thanks for the ideas. jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:26 PM Subject: Re: [qmailtoaster] where oh where is ma mail Good job, searching the list for a solution. Can you pinpoint the corresponding /var/log/qmail/spamd/current log entries? Do you have a way to create a test case such that you can see if a bounce is generated, and if so what it says? jeremy wrote: I had tried the spf fix and qmail stop/start already before emailing the list, i was reading through the archives. That was one of the first things i had tried. Jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:02 PM Subject: Re: [qmailtoaster] where oh where is ma mail jeremy wrote: Okay , i implemented SURBL as to per the wiki page. Im a little lost at to where mail is going now, i see it come in via smtp, says it fond recipient
Re: [qmailtoaster] where oh where is ma mail
nope a no go... it seems that mail is in a continuous loop. Its the same 2 messages trying to be delivered, dont know where they are coming from. I have shut off the SURBL etc, made the changes people have suggested , as well as things i have found on the forum. Jer - Original Message - From: Tim Mancour [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, August 16, 2006 8:46 AM Subject: RE: [qmailtoaster] where oh where is ma mail Jeremy, I had a problem in the past where the From header was incorrect and the domainkey verification dropped the Email (also without a log message). Assuming that you have implemented domainkey, I would disable verification and see if that allows you to receive the Email. In the /etc/tcprules.d/tcp.smtp files delete the DKVERIFY variable then qmailctl stop, cdb and then start. Regards, Tim -Original Message- From: jeremy [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 16, 2006 1:44 AM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] where oh where is ma mail and here is another one: smtpd: @400044e2b06b1b9220dc CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt : sender accepted @400044e2b06b2172957c CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt [EMAIL PROTECTED] : found existing recipient @400044e2b06c2b691b14 simscan:[7871]:CLEAN (1.40/6.00):1.1634s:[Nia_TForumList] Re_ newsletter:216.210.230.236:[EMAIL PROTECTED]:[EMAIL PROTECTED] spamd: @400044e2b06c2b67e294 [7580] info: spamd: clean message (1.4/5.0) for clamav:89 in 0.7 seconds, 7814 bytes. @400044e2b06c2b67ea64 [7580] info: spamd: result: . 1 - AWL,BAYES_00,BE_BOSS,FORGED_YAHOO_RCVD,HTML_40_50,HTML_MESSAGE,HTML_NONELEME NT_40_50 scantime=0.7,size=7814,user=clamav,uid=89,required_score=5.0,rhost=localhost ,raddr=127.0.0.1,rport=22978,mid=[EMAIL PROTECTED] ud.yahoo.com,rmid=[EMAIL PROTECTED],bayes=2.22044604925031e-16,aut olearn=no @400044e2b06c2b684ff4 [7522] info: prefork: child states: II - Original Message - From: jeremy [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:39 PM Subject: Re: [qmailtoaster] where oh where is ma mail Guess I spoke too soon! Here it is again... these both arrive at the same time.. i was watching both windows. smtpd log: @400044e2ae55388951ec CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt : sender accepted @400044e2ae5606db8034 CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt [EMAIL PROTECTED] : found existing recipient @400044e2ae570e97ec7c simscan:[7676]:CLEAN (1.40/6.00):1.1262s:[Nia_TForumList] Re_ newsletter:216.210.230.236:[EMAIL PROTECTED]:[EMAIL PROTECTED] spamd log: @400044e2aeae371518dc [7522] info: prefork: child states: II @400044e2af7901b124c4 [7580] info: spamd: connection from localhost [127.0.0.1] at port 29048 @400044e2af7901b1307c [7580] info: spamd: processing message [EMAIL PROTECTED] aka [EMAIL PROTECTED] for clamav:89 @400044e2af790cad4aec [7580] info: spamd: clean message (1.4/5.0) for clamav:89 in 0.7 seconds, 7814 bytes. @400044e2af790cad6644 [7580] info: spamd: result: . 1 - AWL,BAYES_00,BE_BOSS,FORGED_YAHOO_RCVD,HTML_40_50,HTML_MESSAGE,HTML_NONELEME NT_40_50 scantime=0.7,size=7814,user=clamav,uid=89,required_score=5.0,rhost=localhost ,raddr=127.0.0.1,rport=29048,mid=[EMAIL PROTECTED] ud.yahoo.com,rmid=[EMAIL PROTECTED],bayes=5.55111512312578e-17,aut olearn=no @400044e2af790cad75e4 [7522] info: prefork: child states: II - Original Message - From: jeremy [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:30 PM Subject: Re: [qmailtoaster] where oh where is ma mail eric, thanks for the kudos about the list! thats why its there isnt it? I was talking with EE on IRC and he told me how to flush my queue, so it SEEMS to have stopped that error/infinate loop. Ill let you know if i see it again... thanks for the ideas. jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:26 PM Subject: Re: [qmailtoaster] where oh where is ma mail Good job, searching the list for a solution. Can you pinpoint the corresponding /var/log/qmail/spamd/current log entries? Do you have a way to create a test case such that you can see if a bounce is generated, and if so what it says? jeremy wrote: I had tried the spf fix and qmail stop/start already before emailing the list, i was reading through the archives. That was one of the first things i had tried. Jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:02 PM Subject: Re
[qmailtoaster] Global Spam Jer day
Holy man, is there something going on today that i dont know about? World spam day? Im getting loads today, thats not even being tagged as spam... such as : trader stocking stuffer this oen is for the traders the volume is up , now comes the price set your alarm. put this in your stocking where the heck is all this coming from? and why isnt it being blocked. I use the rbl blocks and alot of the rules from jakes site, some rules from rules du jour. Jer - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] where oh where is ma mail
Okay , i implemented SURBL as to per the wiki page.Im a little lost at to where mail is going now, i see it come in via smtp,says it fond recipient, simscan says its clean... but its not in my inbox.@400044e28f181525eae4 CHKUSER accepted sender: from[EMAIL PROTECTED]::remote mx104.pghost.com:unknown:216.232.111.104 rcpt : sender accepted@400044e28f181cd48034 CHKUSER accepted rcpt: from[EMAIL PROTECTED]::remote mx104.pghost.com:unknown:216.232.111.104 rcpt[EMAIL PROTECTED] : found existing recipient@400044e28f1a0ddd202c simscan:[16538]:CLEAN (-2.20/6.00):1.6510s:Re_[qmailtoaster] Ayuda __ helpp--please.:216.232.111.104:[EMAIL PROTECTED]:[EMAIL PROTECTED]@400044e28f1a19279534 tcpserver: end 16538 status 0any ideas? its not anywhere i can see
Re: [qmailtoaster] where oh where is ma mail
I had tried the spf fix and qmail stop/start already before emailing the list, i was reading through the archives. That was one of the first things i had tried. Jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:02 PM Subject: Re: [qmailtoaster] where oh where is ma mail jeremy wrote: Okay , i implemented SURBL as to per the wiki page. Im a little lost at to where mail is going now, i see it come in via smtp, says it fond recipient, simscan says its clean... but its not in my inbox. @400044e28f181525eae4 CHKUSER accepted sender: from [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:: remote mx104.pghost.com:unknown:216.232.111.104 rcpt : sender accepted @400044e28f181cd48034 CHKUSER accepted rcpt: from [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:: remote mx104.pghost.com:unknown:216.232.111.104 rcpt [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] : found existing recipient @400044e28f1a0ddd202c simscan:[16538]:CLEAN (-2.20/6.00):1.6510s:Re_ [qmailtoaster] Ayuda __ helpp-- please.:216.232.111.104:[EMAIL PROTECTED]:[EMAIL PROTECTED] @400044e28f1a19279534 tcpserver: end 16538 status 0 any ideas? its not anywhere i can see Your problem might not be related to SURBL. Forwarded emails fail the SPF check if SPF is specified in the originator's DNS. There is no message logged when there is an SPF rejection (we've requested a fix for this from the SPF patch author). Try changing /var/qmail/control/spfbehavior from 3 to 1, and # qmailctl stop, # qmailctl start to recycle qmail. # qmailctl restart might be enough to recycle, I'm not sure. Please let us know if this fixes your problem so we can update the wiki FAQs. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] where oh where is ma mail
eric, thanks for the kudos about the list! thats why its there isnt it? I was talking with EE on IRC and he told me how to flush my queue, so it SEEMS to have stopped that error/infinate loop. Ill let you know if i see it again... thanks for the ideas. jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:26 PM Subject: Re: [qmailtoaster] where oh where is ma mail Good job, searching the list for a solution. Can you pinpoint the corresponding /var/log/qmail/spamd/current log entries? Do you have a way to create a test case such that you can see if a bounce is generated, and if so what it says? jeremy wrote: I had tried the spf fix and qmail stop/start already before emailing the list, i was reading through the archives. That was one of the first things i had tried. Jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:02 PM Subject: Re: [qmailtoaster] where oh where is ma mail jeremy wrote: Okay , i implemented SURBL as to per the wiki page. Im a little lost at to where mail is going now, i see it come in via smtp, says it fond recipient, simscan says its clean... but its not in my inbox. @400044e28f181525eae4 CHKUSER accepted sender: from [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:: remote mx104.pghost.com:unknown:216.232.111.104 rcpt : sender accepted @400044e28f181cd48034 CHKUSER accepted rcpt: from [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:: remote mx104.pghost.com:unknown:216.232.111.104 rcpt [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] : found existing recipient @400044e28f1a0ddd202c simscan:[16538]:CLEAN (-2.20/6.00):1.6510s:Re_ [qmailtoaster] Ayuda __ helpp-- please.:216.232.111.104:[EMAIL PROTECTED]:[EMAIL PROTECTED] @400044e28f1a19279534 tcpserver: end 16538 status 0 any ideas? its not anywhere i can see Your problem might not be related to SURBL. Forwarded emails fail the SPF check if SPF is specified in the originator's DNS. There is no message logged when there is an SPF rejection (we've requested a fix for this from the SPF patch author). Try changing /var/qmail/control/spfbehavior from 3 to 1, and # qmailctl stop, # qmailctl start to recycle qmail. # qmailctl restart might be enough to recycle, I'm not sure. Please let us know if this fixes your problem so we can update the wiki FAQs. -- -Eric 'shubes' -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] where oh where is ma mail
Guess I spoke too soon! Here it is again... these both arrive at the same time.. i was watching both windows. smtpd log: @400044e2ae55388951ec CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt : sender accepted @400044e2ae5606db8034 CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt [EMAIL PROTECTED] : found existing recipient @400044e2ae570e97ec7c simscan:[7676]:CLEAN (1.40/6.00):1.1262s:[Nia_TForumList] Re_ newsletter:216.210.230.236:[EMAIL PROTECTED]:[EMAIL PROTECTED] spamd log: @400044e2aeae371518dc [7522] info: prefork: child states: II @400044e2af7901b124c4 [7580] info: spamd: connection from localhost [127.0.0.1] at port 29048 @400044e2af7901b1307c [7580] info: spamd: processing message [EMAIL PROTECTED] aka [EMAIL PROTECTED] for clamav:89 @400044e2af790cad4aec [7580] info: spamd: clean message (1.4/5.0) for clamav:89 in 0.7 seconds, 7814 bytes. @400044e2af790cad6644 [7580] info: spamd: result: . 1 - AWL,BAYES_00,BE_BOSS,FORGED_YAHOO_RCVD,HTML_40_50,HTML_MESSAGE,HTML_NONELEMENT_40_50 scantime=0.7,size=7814,user=clamav,uid=89,required_score=5.0,rhost=localhost,raddr=127.0.0.1,rport=29048,mid=[EMAIL PROTECTED],rmid=[EMAIL PROTECTED],bayes=5.55111512312578e-17,autolearn=no @400044e2af790cad75e4 [7522] info: prefork: child states: II - Original Message - From: jeremy [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:30 PM Subject: Re: [qmailtoaster] where oh where is ma mail eric, thanks for the kudos about the list! thats why its there isnt it? I was talking with EE on IRC and he told me how to flush my queue, so it SEEMS to have stopped that error/infinate loop. Ill let you know if i see it again... thanks for the ideas. jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:26 PM Subject: Re: [qmailtoaster] where oh where is ma mail Good job, searching the list for a solution. Can you pinpoint the corresponding /var/log/qmail/spamd/current log entries? Do you have a way to create a test case such that you can see if a bounce is generated, and if so what it says? jeremy wrote: I had tried the spf fix and qmail stop/start already before emailing the list, i was reading through the archives. That was one of the first things i had tried. Jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:02 PM Subject: Re: [qmailtoaster] where oh where is ma mail jeremy wrote: Okay , i implemented SURBL as to per the wiki page. Im a little lost at to where mail is going now, i see it come in via smtp, says it fond recipient, simscan says its clean... but its not in my inbox. @400044e28f181525eae4 CHKUSER accepted sender: from [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:: remote mx104.pghost.com:unknown:216.232.111.104 rcpt : sender accepted @400044e28f181cd48034 CHKUSER accepted rcpt: from [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:: remote mx104.pghost.com:unknown:216.232.111.104 rcpt [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] : found existing recipient @400044e28f1a0ddd202c simscan:[16538]:CLEAN (-2.20/6.00):1.6510s:Re_ [qmailtoaster] Ayuda __ helpp-- please.:216.232.111.104:[EMAIL PROTECTED]:[EMAIL PROTECTED] @400044e28f1a19279534 tcpserver: end 16538 status 0 any ideas? its not anywhere i can see Your problem might not be related to SURBL. Forwarded emails fail the SPF check if SPF is specified in the originator's DNS. There is no message logged when there is an SPF rejection (we've requested a fix for this from the SPF patch author). Try changing /var/qmail/control/spfbehavior from 3 to 1, and # qmailctl stop, # qmailctl start to recycle qmail. # qmailctl restart might be enough to recycle, I'm not sure. Please let us know if this fixes your problem so we can update the wiki FAQs. -- -Eric 'shubes' -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands
Re: [qmailtoaster] where oh where is ma mail
and here is another one: smtpd: @400044e2b06b1b9220dc CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt : sender accepted @400044e2b06b2172957c CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt [EMAIL PROTECTED] : found existing recipient @400044e2b06c2b691b14 simscan:[7871]:CLEAN (1.40/6.00):1.1634s:[Nia_TForumList] Re_ newsletter:216.210.230.236:[EMAIL PROTECTED]:[EMAIL PROTECTED] spamd: @400044e2b06c2b67e294 [7580] info: spamd: clean message (1.4/5.0) for clamav:89 in 0.7 seconds, 7814 bytes. @400044e2b06c2b67ea64 [7580] info: spamd: result: . 1 - AWL,BAYES_00,BE_BOSS,FORGED_YAHOO_RCVD,HTML_40_50,HTML_MESSAGE,HTML_NONELEMENT_40_50 scantime=0.7,size=7814,user=clamav,uid=89,required_score=5.0,rhost=localhost,raddr=127.0.0.1,rport=22978,mid=[EMAIL PROTECTED],rmid=[EMAIL PROTECTED],bayes=2.22044604925031e-16,autolearn=no @400044e2b06c2b684ff4 [7522] info: prefork: child states: II - Original Message - From: jeremy [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:39 PM Subject: Re: [qmailtoaster] where oh where is ma mail Guess I spoke too soon! Here it is again... these both arrive at the same time.. i was watching both windows. smtpd log: @400044e2ae55388951ec CHKUSER accepted sender: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt : sender accepted @400044e2ae5606db8034 CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote quetzal.nia-nia.com:unknown:216.210.230.236 rcpt [EMAIL PROTECTED] : found existing recipient @400044e2ae570e97ec7c simscan:[7676]:CLEAN (1.40/6.00):1.1262s:[Nia_TForumList] Re_ newsletter:216.210.230.236:[EMAIL PROTECTED]:[EMAIL PROTECTED] spamd log: @400044e2aeae371518dc [7522] info: prefork: child states: II @400044e2af7901b124c4 [7580] info: spamd: connection from localhost [127.0.0.1] at port 29048 @400044e2af7901b1307c [7580] info: spamd: processing message [EMAIL PROTECTED] aka [EMAIL PROTECTED] for clamav:89 @400044e2af790cad4aec [7580] info: spamd: clean message (1.4/5.0) for clamav:89 in 0.7 seconds, 7814 bytes. @400044e2af790cad6644 [7580] info: spamd: result: . 1 - AWL,BAYES_00,BE_BOSS,FORGED_YAHOO_RCVD,HTML_40_50,HTML_MESSAGE,HTML_NONELEMENT_40_50 scantime=0.7,size=7814,user=clamav,uid=89,required_score=5.0,rhost=localhost,raddr=127.0.0.1,rport=29048,mid=[EMAIL PROTECTED],rmid=[EMAIL PROTECTED],bayes=5.55111512312578e-17,autolearn=no @400044e2af790cad75e4 [7522] info: prefork: child states: II - Original Message - From: jeremy [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:30 PM Subject: Re: [qmailtoaster] where oh where is ma mail eric, thanks for the kudos about the list! thats why its there isnt it? I was talking with EE on IRC and he told me how to flush my queue, so it SEEMS to have stopped that error/infinate loop. Ill let you know if i see it again... thanks for the ideas. jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:26 PM Subject: Re: [qmailtoaster] where oh where is ma mail Good job, searching the list for a solution. Can you pinpoint the corresponding /var/log/qmail/spamd/current log entries? Do you have a way to create a test case such that you can see if a bounce is generated, and if so what it says? jeremy wrote: I had tried the spf fix and qmail stop/start already before emailing the list, i was reading through the archives. That was one of the first things i had tried. Jer - Original Message - From: Eric Shubes [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, August 15, 2006 10:02 PM Subject: Re: [qmailtoaster] where oh where is ma mail jeremy wrote: Okay , i implemented SURBL as to per the wiki page. Im a little lost at to where mail is going now, i see it come in via smtp, says it fond recipient, simscan says its clean... but its not in my inbox. @400044e28f181525eae4 CHKUSER accepted sender: from [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:: remote mx104.pghost.com:unknown:216.232.111.104 rcpt : sender accepted @400044e28f181cd48034 CHKUSER accepted rcpt: from [EMAIL PROTECTED] mailto:[EMAIL PROTECTED]:: remote mx104.pghost.com:unknown:216.232.111.104 rcpt [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] : found existing recipient @400044e28f1a0ddd202c simscan:[16538]:CLEAN (-2.20/6.00):1.6510s:Re_ [qmailtoaster] Ayuda __ helpp-- please.:216.232.111.104:[EMAIL PROTECTED]:[EMAIL PROTECTED] @400044e28f1a19279534 tcpserver: end 16538 status 0 any ideas? its not anywhere i can see Your problem might not be related to SURBL. Forwarded emails fail the SPF check if SPF is specified in the originator's DNS. There is no message logged
[qmailtoaster] Qmail Toaster as Exchange MTA
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 I am using Qmail Toaster as our Exchange MTA and was wondering if there was a way to use the chkuser patch the same way that the validrcptto patch can be used. I am wanting to import a list of e-mail addresses from the Exchange box into the Qmail box to cut down on undeliverable spam. -BEGIN PGP SIGNATURE- Version: PGP Desktop 9.0.6 (Build 6060) iQEVAwUBROC89Uj1lc0bjeRJAQh2KwgAk5kXQZlY7Z8UoGRyn129TzN1EevrEkZM f7p4mveoRKP6gWyZQeqUWdt1aRGJH9KeDoeYogMFv3POPPTWVGW5J0LP/jQxPJoh 0w19dCXfvO/Gd9AfCCSI4FtxzizuWk4QJsIQaMDhig7ZF7RtwsPHjySA7M/i8AeB rkuBWtwuciqWzuYqMzMNMU5xhK2z75ghbSY+QJv+VjM6ZyvQrPiUeCLw8tIvBOCg LOAem0ED7AQgKrjx70CrhO7IBFTSmbV8PMgm5/i++4Deh09ayhpWaOTXffkNbKrI oPvBmcGpT3N98pdbYCX14KN9rcO18Adkf5A8hyOxr3HQF1Xdy7zeEQ== =5638 -END PGP SIGNATURE- PGPexch.htm.pgp Description: PGPexch.htm.pgp - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Qmailctl without stat parameter
you just need to type
qmailctl stat
On Mon, 2006-07-24 at 11:33 -0300, Natalio Gatti wrote:
On 7/24/06, Massimiliano Fontana [EMAIL PROTECTED] wrote:
Hi , another problem. If I type Qmailctl , I cannot get the stat
option.but just what is shown here below:
/usr/bin/qmailctl {start|stop|cdb|help}
what do you get if you run service qmail stat?
Natalio
-
QmailToaster hosted by: VR Hosted http://www.vr.org
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
QmailToaster hosted by: VR Hosted http://www.vr.org
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] toaster-admin password wont change
Good afternoon, Finally I have gotten toaster installed on to a SLES 10 server with the help of Johannes! (alot of help) Now that its up and running, when i do a http://www.toasterdomin.com/admin-toaster/ i cant change the password, it says old password and new password i do that, but it doesnt acutally change. Any ideas? thanks jeremy - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Squirrelmail and IMAP Auth issues since upgrade
yes he is .. thats why we love erik and his responses! However, Johannes is also a great help! These two guys being on the list is a godsend for most of us! thanks again guys! jer aka dv8 - Original Message - From: Erik Espinoza [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Monday, July 24, 2006 8:22 PM Subject: Re: [qmailtoaster] Squirrelmail and IMAP Auth issues since upgrade You're Good! On 7/24/06, Eric Shubes [EMAIL PROTECTED] wrote: Robert S Galloway wrote: Hi guys, I've been having significant problems with authentication on my webmail and my IMAP mailboxes since I upgraded to the current toaster. One time it works, the next it doesn't. If I go into webmail, I frequently get past the index.php and get the frames page, but then one of the frames will tell me that my authentication failed and return to the login page. I'm running on CentOS 4.3 with all of the current updates, including the centosplus repo. (except still the supported kernel). Here is a list of my toaster packages: qmail-toaster-1.03-1.3.5 qmailadmin-toaster-1.2.9-1.3.1 ripmime-toaster-1.4.0.6-1.3.1 ucspi-tcp-toaster-0.88-1.3.1 control-panel-toaster-0.5-1.3.1 squirrelmail-toaster-1.4.7-1.3.2 vpopmail-toaster-5.4.13-1.3.1 ezmlm-toaster-0.53.324-1.3.1 spamassassin-toaster-3.1.3-1.3.1 libdomainkeys-toaster-0.68-1.3.1 courier-imap-toaster-4.1.1-1.3.2 ezmlm-cgi-toaster-0.53.324-1.3.1 maildrop-toaster-devel-2.0.2-1.3.1 clamav-toaster-0.88.3-1.3.2 daemontools-toaster-0.76-1.3.1 autorespond-toaster-2.0.4-1.3.1 isoqlog-toaster-2.1-1.3.1 qmail-pop3d-toaster-1.03-1.3.5 qmailmrtg-toaster-4.2-1.3.1 simscan-toaster-1.2-1.3.1 courier-authlib-toaster-0.58-1.3.1 maildrop-toaster-2.0.2-1.3.1 I'm running MySQL 5.0.22-1.centos.1. The IMAP logs just show that login failed. Nothing more than that. Where else should I be looking for the problem? Thanks, Robert P.S. Yes, things worked just fine before the upgrade. Sounds like the MySQL5 problem. Erik has a patched version of vpopmail-toaster at http://devel.qmailtoaster.com/. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Change in clamav-toaster.spec file
could this be also why i dont have the rest of the supervise log files as per my email??? - Original Message - From: Johannes Weberhofer, Weberhofer GmbH [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, July 19, 2006 8:35 AM Subject: [qmailtoaster] Change in clamav-toaster.spec file Hello Erik, I have played around with pre-build packages for different SuSE version. There I have discovered a small problem: When I install a bunch of packages with one command (rpm -i *.rpm), it is done in the wrong order: clamav-toaster needs the qmail-toaster package to be already installed, otherwise the directories /var/log/qmail/clamd and /var/qmail/supervise/clamd are owned by root instead of qmaill. This causes hundreds of clamd multilog: fatal: unable to switch to current directory: access denied error messages appear on the screen. I recommend to change line 412 in clamav-toaster.spec from Requires: zlib = 1.2.3 to Requires: zlib = 1.2.3, qmail-toaster Best regards, Johannes -- |- | weberhofer GmbH | Johannes Weberhofer | information technologies, Austria | | phone : +43 (0)1 5454421 0| email: [EMAIL PROTECTED] | fax : +43 (0)1 5454421 19 | web : http://weberhofer.at | mobile: +43 (0)699 11998315 |--- - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and SE Linux?)
alright, now we are getting somewhere. They built! which is a good thing, however i got this error after i installed the rpms: Adding qmailtoaster users and groups. 5:qmail-toaster ### [ 21%] Compiling default cdb files in /etc/tcprules.d... /var/tmp/rpm-tmp.92494: line 35: /etc/rc.d/init.d/qmail: No such file or directory then i got this when i did qmailctl stat: oes:~/qmailrpm/SuSE-10.1/RPMS/i586 # qmailctl stat authlib: unable to open supervise/ok: file does not exist clamd: unable to open supervise/ok: file does not exist imap4: unable to open supervise/ok: file does not exist imap4-ssl: unable to open supervise/ok: file does not exist pop3: unable to open supervise/ok: file does not exist pop3-ssl: unable to open supervise/ok: file does not exist send: unable to open supervise/ok: file does not exist smtp: unable to open supervise/ok: file does not exist spamd: unable to open supervise/ok: file does not exist authlib/log: unable to open supervise/ok: file does not exist clamd/log: unable to open supervise/ok: file does not exist imap4-ssl/log: unable to open supervise/ok: file does not exist imap4/log: unable to open supervise/ok: file does not exist pop3-ssl/log: unable to open supervise/ok: file does not exist pop3/log: unable to open supervise/ok: file does not exist send/log: unable to open supervise/ok: file does not exist smtp/log: unable to open supervise/ok: file does not exist spamd/log: unable to open supervise/ok: file does not exist oes:~/qmailrpm/SuSE-10.1/RPMS/i586 # but at least they built, and we are getting closer! jer On Sun, 2006-07-16 at 20:34 +0200, Johannes Weberhofer, Weberhofer GmbH wrote: Hi Jeremy, I have prepared a new version of my script for you. The version of SLES was detected incorrect, so I fixed this (SLES 10 should be built like the OSS 10.1 packages). BUILD_RPMS can now be set to with a command line argument if not set correctly. Use --help to see how. It also gives you an hint when it is set incorrectly. You set your CD's base directory as installation source. But: I think many packages for building will not come from the first CD, so I recomment to create a directory and copy all four CD's content to that directory. To your output: /SuSE-10/RPMS is the output-directory where the built packages should be saved to. You can change this now with --targetdir (as explained in help). Default is ~/qmailrpm. The warning, that those directories can not be found appear only before building the first package. Today I have downloaded SLES 10 and tried to install it, but it fails on my x86_64 system, so I could not test the build process on a real SLES system. I hope, you can finally build the packages. I am on business vacation the next days, but I will watch the list and support you as good as possible. Please use the latest attached version of the script. I recommend to use Erik's latest vpopmail-rpm from http://devel.qmailtoaster.com/ because that fixes a problem for your system. Best regards, Johannes jeremy schrieb: Okay Ive done this... mounted the dvd to /mnt/cd1 then i go : export BUILD_RPMS=/mnt/cd1/suse/ (tried /mnt/cd1/ , and /mnt/cd1/suse/i586) and its a no go... i get this error: sh current-opensuse-build.sh Package : daemontools-toaster Building for: SuSE 10 Architecture: i586 117 blocks logging output to /var/tmp/build-root/.build.log... oes started build at Sat Jul 15 15:49:31 PDT 2006. Using BUILD_ROOT=/var/tmp/build-root Using BUILD_RPMS=/mnt/cd1/suse//:/SuSE-10/RPMS/i586:/SuSE-10/RPMS/noarch Using BUILD_ARCH=i586:i486:i386 processing specfile /root/qmailrpm/daemontools-toaster-0.76-1.3.1/daemontools-toaster.spec... init_buildsystem daemontools-toaster.spec ... initializing /var/tmp/build-root/.srcfiles.cache with find command... find: /SuSE-10/RPMS: No such file or directory find: /SuSE-10/RPMS: No such file or directory expanding package dependencies... expansion error nothing provides libselinux showing the list of the /mnt/cd1 here it what that is: oes:~/qmailrpm # cd /mnt/cd1/ oes:/mnt/cd1 # ls ARCHIVES.gz directory.yast COPYING docu COPYING.dedosutils COPYRIGHT gpg-pubkey-0dfb3188-41ed929b.asc COPYRIGHT.de gpg-pubkey-307e3d54-44201d5d.asc ChangeLog gpg-pubkey-3d25d3d9-36e12d04.asc INDEX.gz gpg-pubkey-7e2e3b05-44748aba.asc NEWS gpg-pubkey-9c800aca-40d8063e.asc READMEgpg-pubkey-C0F2899B.asc boot gpg-pubkey-a1912208-446a0899.asc content ls-lR.gz content.asc media.1 content.key pubring.gpg control.xml suse in the suse directory i have oes:/mnt/cd1 # cd suse oes:/mnt/cd1/suse # ls i586 i686 noarch setup oes:/mnt/cd1/suse # whats my next step? And where is this /SUSE 10/RPMS being found. Remember this is SLES 10 RC3 Jer
Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and SE Linux?)
When I execute ./current-opensuse-build.sh --help Current default is set to: (and its blank) if i try to look for it, i cant find it. I tried /Suse/suse/ i did a search for SuSe and i cant find a directory that looks like that. I know I have build installed because I get: build-2006.4.28-3 when i do a rpm -qa build On Sat, 2006-07-15 at 09:07 +0200, Weberhofer GmbH wrote: When you execute ./current-opensuse-build.sh --help - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and SE Linux?)
Okay Ive done this... mounted the dvd to /mnt/cd1 then i go : export BUILD_RPMS=/mnt/cd1/suse/ (tried /mnt/cd1/ , and /mnt/cd1/suse/i586) and its a no go... i get this error: sh current-opensuse-build.sh Package : daemontools-toaster Building for: SuSE 10 Architecture: i586 117 blocks logging output to /var/tmp/build-root/.build.log... oes started build at Sat Jul 15 15:49:31 PDT 2006. Using BUILD_ROOT=/var/tmp/build-root Using BUILD_RPMS=/mnt/cd1/suse//:/SuSE-10/RPMS/i586:/SuSE-10/RPMS/noarch Using BUILD_ARCH=i586:i486:i386 processing specfile /root/qmailrpm/daemontools-toaster-0.76-1.3.1/daemontools-toaster.spec... init_buildsystem daemontools-toaster.spec ... initializing /var/tmp/build-root/.srcfiles.cache with find command... find: /SuSE-10/RPMS: No such file or directory find: /SuSE-10/RPMS: No such file or directory expanding package dependencies... expansion error nothing provides libselinux showing the list of the /mnt/cd1 here it what that is: oes:~/qmailrpm # cd /mnt/cd1/ oes:/mnt/cd1 # ls ARCHIVES.gz directory.yast COPYING docu COPYING.dedosutils COPYRIGHT gpg-pubkey-0dfb3188-41ed929b.asc COPYRIGHT.de gpg-pubkey-307e3d54-44201d5d.asc ChangeLog gpg-pubkey-3d25d3d9-36e12d04.asc INDEX.gz gpg-pubkey-7e2e3b05-44748aba.asc NEWS gpg-pubkey-9c800aca-40d8063e.asc READMEgpg-pubkey-C0F2899B.asc boot gpg-pubkey-a1912208-446a0899.asc content ls-lR.gz content.asc media.1 content.key pubring.gpg control.xml suse in the suse directory i have oes:/mnt/cd1 # cd suse oes:/mnt/cd1/suse # ls i586 i686 noarch setup oes:/mnt/cd1/suse # whats my next step? And where is this /SUSE 10/RPMS being found. Remember this is SLES 10 RC3 Jer On Sat, 2006-07-15 at 20:25 +0200, Johannes Weberhofer, Weberhofer GmbH wrote: Hi! This must be your Opensuse repository - for example your SuSE DVD or - much better - a directory on your hard disk containing the repository. The build environment creates an complete fresh SuSE installation in /var/tmp/build-root before building each package of qmail toaster, therefore it needs access to the installation sources. It makes much difference if you have a fast installation repository on disk or if you set BUILD_RPMS to /media/dvd, mount the dvd and use all SuSE RPMs from there. /SuSE/suse/i386/10.0 is not there by default. That's where I have copied the file on my build server. Create and use any directory where you have enough space for holding the DVD's content. Best regards, Johannes jeremy schrieb: When I execute ./current-opensuse-build.sh --help Current default is set to: (and its blank) if i try to look for it, i cant find it. I tried /Suse/suse/ i did a search for SuSe and i cant find a directory that looks like that. I know I have build installed because I get: build-2006.4.28-3 when i do a rpm -qa build On Sat, 2006-07-15 at 09:07 +0200, Weberhofer GmbH wrote: When you execute ./current-opensuse-build.sh --help - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and SE Linux?)
Well, I got it to install, however its not working, using the sus101.sh
When I tried to use your script to build i got a an error about find, then
it searched through a whack of files and errored out... it seems im not
meant to run qmail on SLES lol.. Here is an except of what happens when i
use the build script you made.
mail:/usr/src/qtms-install # sh current-opensuse-build.sh
Package : daemontools-toaster
Building for: SuSE 10
Architecture: i586
117 blocks
logging output to /var/tmp/build-root/.build.log...
mail started build at Fri Jul 14 07:05:41 PDT 2006.
Using BUILD_ROOT=/var/tmp/build-root
Using
BUILD_RPMS=/:/root/qmailrpm/SuSE-10/RPMS/i586:/root/qmailrpm/SuSE-10/RPMS/noarch
Using BUILD_ARCH=i586:i486:i386
processing specfile
/usr/src/qtms-install/daemontools-toaster-0.76-1.3.1/daemontools-toaster.spec...
init_buildsystem daemontools-toaster.spec ...
expanding package dependencies...
expansion error
nothing provides bison
mail:/usr/src/qtms-install #
- Original Message -
From: Weberhofer GmbH [EMAIL PROTECTED]
To: qmailtoaster-list@qmailtoaster.com
Sent: Friday, July 14, 2006 2:50 AM
Subject: Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and
SE Linux?)
Dear Jeremy,
Could you compile successful with the script? I forgot to mention, that
before installation you have to install the build package on your build
host. Do not use the sus10X-deps.sh script, you do not need package needed
for building!
After running the build process, you should install the created packages
using rpm -Uhv or via yast.
Most packages should be installed. The djbdns packages can be installed
when you like to use djbdns. Those packages can conflict between each
other - only install the ones you need for your purpose.
Attached you find a version of the build script with some additional
features and an (experimental) included patch for the Mysql has gone
away error on MySQL 5 versions.
Best regards,
Johannes
jeremy wrote:
Uggg. this is becoming a huge chore.
so far i think it might work using the sus-install.sh only thing is the
binary qmailctl doesnt go in init.d cause there is no init.d
directory... i might just mickey mouse it and create it
On Thu, 2006-07-13 at 19:59 -0700, jeremy wrote:
Well I fixed those errors, by manually installing them from source, then
editing the .sh so they werent there anymore. However, now i get
depenencie errors in yast.. so ill look at that now... seeing what i can
remove out of the .sh yet again so i dont get those errors, basically
its telling me i should remove apache and php5, but that aint gunna
happen.
jer
On Thu, 2006-07-13 at 18:32 -0700, jeremy wrote:
Im trying to install this into a SLES 10 server, and im getting an
error
when i run the sus101-deps.sh it starts up yast, then says following
packages havent been found on the medium:
perl-Time-modules
perl-MIME-Types
perl-HTML-Tree
perl-CGI-Application
SDL-perl
lynx
krpmbuilder
build
These arent anywhere on the cds.
Any ideas?
...
--
|-
| weberhofer GmbH | Johannes Weberhofer
| information technologies, Austria
|
| phone : +43 (0)1 5454421 0| email: [EMAIL PROTECTED]
| fax : +43 (0)1 5454421 19 | web : http://weberhofer.at
| mobile: +43 (0)699 11998315
|---
#!/bin/sh
#
# build the system for SuSE 9.3 - OpenSuSE 10.1 systems
#
# author: Johannes Weberhofer, May - July 2006
# licensed under the GPL
#
#
# modify settings here
# please ensure, that the BUILD_RPMS environment variable is set to a
# valid (Open)SuSE installation repository
# This variable should be set to a directory where all (S)RPMs will be
# copied to
QMAILRPM=`dirname ~/qmailrpm`/`basename ~/qmailrpm`
# no changes should be done below this point
#
function ShowHelp() {
echo usage: `basename $0` --dry-run --clean --all --help
[--i586|--x86_64]
echo --dry-rundon't build
echo --clean delete all build directories
echo --allbuild all rpms even those which already
have been built
echo --help this help screen
echo --i586|--x86_64 the architecture to build for (default for
your system is: $ARCH
echo
echo Please do not forget to set 'BUILD_RPMS' to a valid (Open)SuSE
installation repository.
echo Current default is set to: $BUILD_RPMS
echo
echo Before starting the build process, download the SRPMs to the current
directory
echo
echo The resulting (S)RPMs will be copied to $QMAILRPM
echo If you like to set another directory, please edit `basename $0`
echo
echo (c) Johannes Weberhofer [EMAIL PROTECTED], May - July 2006,
Version 1.1
echo
Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and SE Linux?)
oh and btw, bison is installed, so im going to try it with the new script
you attached, ill let you know.
- Original Message -
From: jeremy [EMAIL PROTECTED]
To: qmailtoaster-list@qmailtoaster.com
Sent: Friday, July 14, 2006 7:07 AM
Subject: Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and
SE Linux?)
Well, I got it to install, however its not working, using the sus101.sh
When I tried to use your script to build i got a an error about find, then
it searched through a whack of files and errored out... it seems im not
meant to run qmail on SLES lol.. Here is an except of what happens when i
use the build script you made.
mail:/usr/src/qtms-install # sh current-opensuse-build.sh
Package : daemontools-toaster
Building for: SuSE 10
Architecture: i586
117 blocks
logging output to /var/tmp/build-root/.build.log...
mail started build at Fri Jul 14 07:05:41 PDT 2006.
Using BUILD_ROOT=/var/tmp/build-root
Using
BUILD_RPMS=/:/root/qmailrpm/SuSE-10/RPMS/i586:/root/qmailrpm/SuSE-10/RPMS/noarch
Using BUILD_ARCH=i586:i486:i386
processing specfile
/usr/src/qtms-install/daemontools-toaster-0.76-1.3.1/daemontools-toaster.spec...
init_buildsystem daemontools-toaster.spec ...
expanding package dependencies...
expansion error
nothing provides bison
mail:/usr/src/qtms-install #
- Original Message -
From: Weberhofer GmbH [EMAIL PROTECTED]
To: qmailtoaster-list@qmailtoaster.com
Sent: Friday, July 14, 2006 2:50 AM
Subject: Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1
(and SE Linux?)
Dear Jeremy,
Could you compile successful with the script? I forgot to mention, that
before installation you have to install the build package on your build
host. Do not use the sus10X-deps.sh script, you do not need package
needed for building!
After running the build process, you should install the created packages
using rpm -Uhv or via yast.
Most packages should be installed. The djbdns packages can be installed
when you like to use djbdns. Those packages can conflict between each
other - only install the ones you need for your purpose.
Attached you find a version of the build script with some additional
features and an (experimental) included patch for the Mysql has gone
away error on MySQL 5 versions.
Best regards,
Johannes
jeremy wrote:
Uggg. this is becoming a huge chore.
so far i think it might work using the sus-install.sh only thing is the
binary qmailctl doesnt go in init.d cause there is no init.d
directory... i might just mickey mouse it and create it
On Thu, 2006-07-13 at 19:59 -0700, jeremy wrote:
Well I fixed those errors, by manually installing them from source,
then
editing the .sh so they werent there anymore. However, now i get
depenencie errors in yast.. so ill look at that now... seeing what i
can
remove out of the .sh yet again so i dont get those errors, basically
its telling me i should remove apache and php5, but that aint gunna
happen.
jer
On Thu, 2006-07-13 at 18:32 -0700, jeremy wrote:
Im trying to install this into a SLES 10 server, and im getting an
error
when i run the sus101-deps.sh it starts up yast, then says following
packages havent been found on the medium:
perl-Time-modules
perl-MIME-Types
perl-HTML-Tree
perl-CGI-Application
SDL-perl
lynx
krpmbuilder
build
These arent anywhere on the cds.
Any ideas?
...
--
|-
| weberhofer GmbH | Johannes Weberhofer
| information technologies, Austria
|
| phone : +43 (0)1 5454421 0| email: [EMAIL PROTECTED]
| fax : +43 (0)1 5454421 19 | web : http://weberhofer.at
| mobile: +43 (0)699 11998315
|---
#!/bin/sh
#
# build the system for SuSE 9.3 - OpenSuSE 10.1 systems
#
# author: Johannes Weberhofer, May - July 2006
# licensed under the GPL
#
#
# modify settings here
# please ensure, that the BUILD_RPMS environment variable is set to a
# valid (Open)SuSE installation repository
# This variable should be set to a directory where all (S)RPMs will be
# copied to
QMAILRPM=`dirname ~/qmailrpm`/`basename ~/qmailrpm`
# no changes should be done below this point
#
function ShowHelp() {
echo usage: `basename $0` --dry-run --clean --all --help
[--i586|--x86_64]
echo --dry-rundon't build
echo --clean delete all build directories
echo --allbuild all rpms even those which already
have been built
echo --help this help screen
echo --i586|--x86_64 the architecture to build for (default for
your system is: $ARCH
echo
echo Please do not forget to set 'BUILD_RPMS' to a valid (Open)SuSE
installation repository.
echo Current default is set
Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and SE Linux?)
Im trying to install this into a SLES 10 server, and im getting an error
when i run the sus101-deps.sh it starts up yast, then says following
packages havent been found on the medium:
perl-Time-modules
perl-MIME-Types
perl-HTML-Tree
perl-CGI-Application
SDL-perl
lynx
krpmbuilder
build
These arent anywhere on the cds.
Any ideas?
On Wed, 2006-07-12 at 17:29 +0200, Weberhofer GmbH wrote:
Hello!
After a while, I have finally found out what made problems while the
compilation of the toaster packages in the different SuSE releases. Now all
toaster packages can be build for the above mentioned distributions. I have
compiled versions for 9.3-i586 10.0-i586 10.0-x86_64 10.1-i586 10.1-x86_64. I
think, it should also compile on SE distributions.
As usual, I always compile the packages in build environments. Therefore I
had to modify the spec-files as explained here:
= libdomainkeys-toaster
I changed the text 'ripMIME for qmail-toaster' to 'DomainKey library'.
This is only a cosmetic thing and not important for compiling
= vpopmail-toaster
Requires: All SuSE releases need pwdutils, to ensure, that the users and
groups
can be added before building
= qmail-toaster
BuildRequires: All SuSE releases need mysql-devel
Requires: All SuSE releases need pwdutils, to ensure, that the users and
groups
can be added before building
= courier-authlib-toaster
BuildRequires: vpopmail-toaster, gcc-c++, libstdc++-devel, expect,
mysql-shared, mysql-devel
= courier-imap-toaster
BuildRequires: All SuSE releases need gcc-c++, libstdc++-devel, mysql-devel
fileutils and textutils should be moved to the distribution specific
[Build]Requires
sections because they are not available in SuSE.
= control-panel-toaster
The version information for PHP is not good. It is better to refer to PHP in
general and query the information number of PHP. There is no need to restrict
to PHP5 for example. Is there any specific reason why to request a specific
Apache version?
= qmailmrtg-toaster
BuildRequires: All SuSE releases need mrtg
The PHP/Apache version information had to be changed (see
control-panel-toaster)
= maildrop-toaster
BuildRequires: gcc-c++, libstdc++-devel, pcre, pcre-devel, openldap2-client,
mrtg, net-tools, openssl, cyrus-sasl, vpopmail-toaster, qmail-toaster
= isoqlog-toaster ??
#PKSUSE100='php5'
#PKSUSE101='php'
;;
= squirrelmail-toaster
The PHP/Apache version information had to be changed (see
control-panel-toaster)
= spamassassin-toaster
BuildRequires:
Replaced the line perl = 5.8.7, perl(Digest::SHA1),
perl(HTML::Parser), openssl-devel
with tperl = 5.8.7, perl-Digest-SHA1, perl-HTML-Parser, openssl-devel
Requires:
Replaced the line perl(Digest::SHA1), perl(HTML::Parser),
perl(Pod::Usage), procmail
with tperl-Digest-SHA1, perl-HTML-Parser, procmail
=clamav-toaster
Requires: All SuSE releases need pwdutils, to ensure, that the users and
groups
can be added before building
In the %post section
the line /sbin/service freshclam start /dev/null 21
has been replaced by
if test %{build_sus_100} -eq 0 -a %{build_sus_10064} -eq 0; then
/sbin/service freshclam start /dev/null 21
fi
because /sbin/service is not available at SuSE distributions before 10.1.
=simscan-toaster
BuildRequires: perl-Digest-SHA1, perl-HTML-Parser, clamav-toaster,
spamassassin-toaster, ucspi-tcp-toaster
=djbdns
BuildRequires:
the line chkconfig, initscripts, sh-utils, daemontools-toaster,
ucspi-tcp-toaster
has been replaced by, because some of the packages are not available there. I
suggest to move those packages to the relevant sections of the distributions.
sh-utils, daemontools-toaster, ucspi-tcp-toaster
before the line # create log symlinks
the following lines have been inserted, to allow the rpm-packager to find
some symlinks:
# touch logs
pushd %{buildroot}/var/djbdns
mkdir -p dnscachex/log dnscache/log tinydns/log axfrdns/log
touch dnscachex/log/main dnscache/log/main tinydns/log/main axfrdns/log/main
popd
Unfortunately SuSE seems to ignore the BuildPreReq lines. Therefore all
BuildPreReq lines
Re: [qmailtoaster] Compiling on SuSE Linux 9.3, 10.0 and 10.1 (and SE Linux?)
Well I fixed those errors, by manually installing them from source, then
editing the .sh so they werent there anymore. However, now i get
depenencie errors in yast.. so ill look at that now... seeing what i can
remove out of the .sh yet again so i dont get those errors, basically
its telling me i should remove apache and php5, but that aint gunna
happen.
jer
On Thu, 2006-07-13 at 18:32 -0700, jeremy wrote:
Im trying to install this into a SLES 10 server, and im getting an error
when i run the sus101-deps.sh it starts up yast, then says following
packages havent been found on the medium:
perl-Time-modules
perl-MIME-Types
perl-HTML-Tree
perl-CGI-Application
SDL-perl
lynx
krpmbuilder
build
These arent anywhere on the cds.
Any ideas?
On Wed, 2006-07-12 at 17:29 +0200, Weberhofer GmbH wrote:
Hello!
After a while, I have finally found out what made problems while the
compilation of the toaster packages in the different SuSE releases. Now all
toaster packages can be build for the above mentioned distributions. I have
compiled versions for 9.3-i586 10.0-i586 10.0-x86_64 10.1-i586 10.1-x86_64.
I think, it should also compile on SE distributions.
As usual, I always compile the packages in build environments. Therefore I
had to modify the spec-files as explained here:
= libdomainkeys-toaster
I changed the text 'ripMIME for qmail-toaster' to 'DomainKey library'.
This is only a cosmetic thing and not important for compiling
= vpopmail-toaster
Requires: All SuSE releases need pwdutils, to ensure, that the users and
groups
can be added before building
= qmail-toaster
BuildRequires: All SuSE releases need mysql-devel
Requires: All SuSE releases need pwdutils, to ensure, that the users and
groups
can be added before building
= courier-authlib-toaster
BuildRequires: vpopmail-toaster, gcc-c++, libstdc++-devel, expect,
mysql-shared, mysql-devel
= courier-imap-toaster
BuildRequires: All SuSE releases need gcc-c++, libstdc++-devel,
mysql-devel
fileutils and textutils should be moved to the distribution specific
[Build]Requires
sections because they are not available in SuSE.
= control-panel-toaster
The version information for PHP is not good. It is better to refer to PHP
in general and query the information number of PHP. There is no need to
restrict to PHP5 for example. Is there any specific reason why to request a
specific Apache version?
= qmailmrtg-toaster
BuildRequires: All SuSE releases need mrtg
The PHP/Apache version information had to be changed (see
control-panel-toaster)
= maildrop-toaster
BuildRequires: gcc-c++, libstdc++-devel, pcre, pcre-devel,
openldap2-client, mrtg, net-tools, openssl, cyrus-sasl, vpopmail-toaster,
qmail-toaster
= isoqlog-toaster ??
#PKSUSE100='php5'
#PKSUSE101='php'
;;
= squirrelmail-toaster
The PHP/Apache version information had to be changed (see
control-panel-toaster)
= spamassassin-toaster
BuildRequires:
Replaced the line perl = 5.8.7, perl(Digest::SHA1),
perl(HTML::Parser), openssl-devel
with tperl = 5.8.7, perl-Digest-SHA1, perl-HTML-Parser, openssl-devel
Requires:
Replaced the line perl(Digest::SHA1), perl(HTML::Parser),
perl(Pod::Usage), procmail
with tperl-Digest-SHA1, perl-HTML-Parser, procmail
=clamav-toaster
Requires: All SuSE releases need pwdutils, to ensure, that the users and
groups
can be added before building
In the %post section
the line /sbin/service freshclam start /dev/null 21
has been replaced by
if test %{build_sus_100} -eq 0 -a %{build_sus_10064} -eq 0; then
/sbin/service freshclam start /dev/null 21
fi
because /sbin/service is not available at SuSE distributions before 10.1.
=simscan-toaster
BuildRequires: perl-Digest-SHA1, perl-HTML-Parser, clamav-toaster,
spamassassin-toaster, ucspi-tcp-toaster
=djbdns
BuildRequires:
the line chkconfig, initscripts, sh-utils, daemontools-toaster,
ucspi-tcp-toaster
has been replaced by, because some of the packages are not available there.
I suggest to move those packages to the relevant sections
[qmailtoaster] Install on SLES 10 or OES2
Has anyone successfully installed qmailtoaster on SLES 10 aka OES 2 I thought i could use the vmware image with the XEN but alas I cannot. So if anyone knows how to do this, please advise. thanks jeremy - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] More Fedora 5 help.
rpm -e djbdns-localcache then redo it jer - Original Message - From: Ron Horist [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Monday, June 26, 2006 8:20 PM Subject: [qmailtoaster] More Fedora 5 help. When I am trying to install the djbdns this is the error I am getting: Installing djbdns-localcache error: Failed dependencies: caching-nameserver conflicts with djbdns-localcache-1.05-1.0.2.i386 caching-nameserver is not installed on the system. What is the issue here??? Thanks - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] More Fedora 5 help.
er... woops.. other way around... sorry didnt read that one. rpm -q caching-nameserver see if it shows up .. if it does, rpm -e caching-nameserver jer - Original Message - From: Ron Horist [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Monday, June 26, 2006 8:20 PM Subject: [qmailtoaster] More Fedora 5 help. When I am trying to install the djbdns this is the error I am getting: Installing djbdns-localcache error: Failed dependencies: caching-nameserver conflicts with djbdns-localcache-1.05-1.0.2.i386 caching-nameserver is not installed on the system. What is the issue here??? Thanks - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] OES and qmailtoaster
okay... that was an exercise in fun.. short answer, nope it doesnt work with OES sp2. I guess i cant use toaster if I use OES. Jeremy On Sat, 2006-06-17 at 15:26 -0700, jeremy cassidy wrote: im going to try this on OES sp2, and ill let you know if i get any errors with that one. The reason i dropped OES was because i couldnt get toaster to work with it. jer On Fri, 2006-06-16 at 18:22 +0200, Weberhofer GmbH wrote: Dear all, as I have switched several systems from self-built qmail systems to the qmail-toaster pckages, I have created a patch, which let me compile the whole system in an clean OpenSuse build environment. I had to change many BuildRequires sections in the spec files; in the djbdns.spec file I removed the chkconfig and initscripts packages from the Requires section: Those should be installed on every (redhat) system and are not available on OpenSuSE; if you think it necessary to keep it, a seperate section for OpenSuSE should be included into the spec file. Attached you find a diff file to updtae all spec files. Additionally I have attached a shell script which builds the whole toaster package in the Opensuse 10.1 build environment. Download the source packages files, and copy the current-opensuse-build.sh file to the same directory. Check the paths in the head section of the script and run it: It should result in a clean set of RPM files. sed will incorporate the above mentioned changes to the spec files. The script has been tested for Opensuse 10.1 x86_64 and i586 environments. Best regards, Johannes Weberhofer plain text document attachment (current-opensuse-build.sh) #!/bin/sh # # build the system for opensuse 10.1 system # # author: Johannes Weberhofer, May 2006 # # use this repository to store the qmail RPM's QMAILRPM=`dirname ~/qmailrpm`/`basename ~/qmailrpm` # build for this architecture ARCH=$BUILD_ARCH #ARCH=x86_64 ARCH=i586 # here are the default SuSE RPM's located DEFAULTRPM=$BUILD_RPMS # # no changes should be done below this point if test ! -d $QMAILRPM ; then mkdir -p $QMAILRPM fi # # and now build the packages BUILDPKGS=daemontools-toaster ucspi-tcp-toaster vpopmail-toaster libdomainkeys qmail-toaster courier-authlib-toaster courier-imap-toaster autorespond-toaster control-panel-toaster ezmlm-toaster qmailadmin-toaster qmailmrtg-toaster maildrop-toaster isoqlog-toaster vqadmin-toaster squirrelmail-toaster spamassassin-toaster clamav-toaster ripmime-toaster simscan-toaster djbdns for PACKAGE in $BUILDPKGS ; do DIR=`ls $PACKAGE-*.src.rpm | tail | sed -e 's/.src.rpm//'` if test ! -e $QMAILRPM/RPMS/$ARCH/$DIR.$ARCH.rpm -a ! -e $QMAILRPM/RPMS/noarch/$DIR.noarch.rpm; then if test ! -d $DIR ; then mkdir $DIR else rm -rf $DIR/* fi pushd $DIR 21 /dev/null unrpm ../$DIR.src.rpm # do some package-related things WASPATCHED=1 case $PACKAGE in libdomainkeys-toaster) SEDS='s/ripMIME for qmail-toaster/DomainKey library/' ;; qmail-toaster) SEDS='s/^\(BuildRequires:.*openssl-devel = 0.9.7, krb5-devel = 1.4.1\)/\1, mysql-devel, libdomainkeys-toaster/' ;; courier-authlib-toaster) SEDS='s/^\(BuildRequires:.*automake, autoconf\)/\1, mysql-devel, expect, gcc-c++, qmail-toaster/' ;; courier-imap-toaster) SEDS='s/^\(BuildRequires:.*openssl-devel = 0.9.7, expect = 5.43.0, gdbm-devel = 1.8.0\)/\1, mysql-devel/' ;; control-panel-toaster) SEDS='s/^\(Requires:.*apache2 = 2.0.52, php[45] = [0-9\.]*\)/Requires:\tapache2 = 2.0.52, php = 4.4.0\nBuildRequires:\tapache2/' ;; qmailmrtg-toaster) SEDS='s/^\(Requires:.*cron = 4.1, apache2 = 2.0.54, php4 = 4.4.0, mrtg\)/Requires:\tcron = 4.1, apache2 = 2.0.54, php = 4.4.0, mrtg/' ;; maildrop-toaster) SEDS='s/^\(%define.*ostype SuSE 10.* Linux\)/\1\nBuildRequires:\tgcc-c++, pcre-devel/' ;; isoqlog-toaster) SEDS='s/^\(%define.*ostype SuSE 10.* Linux\)/\1\nBuildRequires:\tqmail-toaster, control-panel-toaster, php
Re: [qmailtoaster] OES and qmailtoaster
OES sp2 is open enterprise server. It's at novell. Basically its suse enterprise 9 http://www.novell.com/products/openenterpriseserver/eval.html On Sun, 2006-06-18 at 00:10 -0500, Nick Hemmesch wrote: Hi Jeremy, Where do I find OES sp2? What is it's long name? Regards, Nick okay... that was an exercise in fun.. short answer, nope it doesnt work with OES sp2. I guess i cant use toaster if I use OES. Jeremy On Sat, 2006-06-17 at 15:26 -0700, jeremy cassidy wrote: im going to try this on OES sp2, and ill let you know if i get any errors with that one. The reason i dropped OES was because i couldnt get toaster to work with it. jer On Fri, 2006-06-16 at 18:22 +0200, Weberhofer GmbH wrote: Dear all, as I have switched several systems from self-built qmail systems to the qmail-toaster pckages, I have created a patch, which let me compile the whole system in an clean OpenSuse build environment. I had to change many BuildRequires sections in the spec files; in the djbdns.spec file I removed the chkconfig and initscripts packages from the Requires section: Those should be installed on every (redhat) system and are not available on OpenSuSE; if you think it necessary to keep it, a seperate section for OpenSuSE should be included into the spec file. Attached you find a diff file to updtae all spec files. Additionally I have attached a shell script which builds the whole toaster package in the Opensuse 10.1 build environment. Download the source packages files, and copy the current-opensuse-build.sh file to the same directory. Check the paths in the head section of the script and run it: It should result in a clean set of RPM files. sed will incorporate the above mentioned changes to the spec files. The script has been tested for Opensuse 10.1 x86_64 and i586 environments. Best regards, Johannes Weberhofer plain text document attachment (current-opensuse-build.sh) #!/bin/sh # # build the system for opensuse 10.1 system # # author: Johannes Weberhofer, May 2006 # # use this repository to store the qmail RPM's QMAILRPM=`dirname ~/qmailrpm`/`basename ~/qmailrpm` # build for this architecture ARCH=$BUILD_ARCH #ARCH=x86_64 ARCH=i586 # here are the default SuSE RPM's located DEFAULTRPM=$BUILD_RPMS # # no changes should be done below this point if test ! -d $QMAILRPM ; then mkdir -p $QMAILRPM fi # # and now build the packages BUILDPKGS=daemontools-toaster ucspi-tcp-toaster vpopmail-toaster libdomainkeys qmail-toaster courier-authlib-toaster courier-imap-toaster autorespond-toaster control-panel-toaster ezmlm-toaster qmailadmin-toaster qmailmrtg-toaster maildrop-toaster isoqlog-toaster vqadmin-toaster squirrelmail-toaster spamassassin-toaster clamav-toaster ripmime-toaster simscan-toaster djbdns for PACKAGE in $BUILDPKGS ; do DIR=`ls $PACKAGE-*.src.rpm | tail | sed -e 's/.src.rpm//'` if test ! -e $QMAILRPM/RPMS/$ARCH/$DIR.$ARCH.rpm -a ! -e $QMAILRPM/RPMS/noarch/$DIR.noarch.rpm; then if test ! -d $DIR ; then mkdir $DIR else rm -rf $DIR/* fi pushd $DIR 21 /dev/null unrpm ../$DIR.src.rpm # do some package-related things WASPATCHED=1 case $PACKAGE in libdomainkeys-toaster) SEDS='s/ripMIME for qmail-toaster/DomainKey library/' ;; qmail-toaster) SEDS='s/^\(BuildRequires:.*openssl-devel = 0.9.7, krb5-devel = 1.4.1\)/\1, mysql-devel, libdomainkeys-toaster/' ;; courier-authlib-toaster) SEDS='s/^\(BuildRequires:.*automake, autoconf\)/\1, mysql-devel, expect, gcc-c++, qmail-toaster/' ;; courier-imap-toaster) SEDS='s/^\(BuildRequires:.*openssl-devel = 0.9.7, expect = 5.43.0, gdbm-devel = 1.8.0\)/\1, mysql-devel/' ;; control-panel-toaster) SEDS='s/^\(Requires:.*apache2 = 2.0.52, php[45] = [0-9\.]*\)/Requires:\tapache2 = 2.0.52, php = 4.4.0\nBuildRequires:\tapache2/' ;; qmailmrtg-toaster) SEDS='s/^\(Requires:.*cron = 4.1, apache2 = 2.0.54, php4 = 4.4.0, mrtg\)/Requires:\tcron = 4.1, apache2 = 2.0.54, php = 4.4.0, mrtg/' ;; maildrop-toaster) SEDS='s/^\(%define.*ostype SuSE 10.* Linux\)/\1
RE: [qmailtoaster] removing an old qmail install
Can u send that to me as well please thnks -Original Message- From: Jake Vickers [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: 13/06/06 3:22 PM Subject: Re: [qmailtoaster] removing an old qmail install Elliot Adler wrote: What is the correct way of uninstalling an old qmail toaster install bec, I want to redo it with the newest toaster Thanks I have an uninstall script for older versions, that I'm going to email to you off-list. It was written to remove qmail installs for devel work (install packages again to test scripts, etc.) - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] goodrcptto patch
My setup is like this: InternetqmailExchange Is there something like the goodrcptto patch listed here http://http.netdevice.com:9080/qmail/rcptck/ for qmail toaster? Im wanting to prevent blowback by importing into qmail a list of valid e-mail addresses. Thanks Jeremy
RE: [qmailtoaster] My toaster keeps getting blacklisted by CBL
This was why my toaster was blacklisted. The host identified by HELO was localhost.localdomain. easy fix. Thanks! -Original Message- From: Warner Moore [mailto:[EMAIL PROTECTED] Sent: Thursday, May 18, 2006 8:09 AM To: qmailtoaster-list@qmailtoaster.com Subject: RE: [qmailtoaster] My toaster keeps getting blacklisted by CBL CBL blocks because of the host identified by 'helo.' If the host does not resolve correctly, it could cause issues. Check your mail logs. (/var/log/qmail) There should be a URL at abuseat.org in your logs, which will contain more information. Regards, -- Warner Moore Enterprise Services Group 2CheckOut.com, Inc. -Original Message- From: Carrigan, Jeremy [mailto:[EMAIL PROTECTED] Sent: Thursday, May 18, 2006 7:56 AM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] My toaster keeps getting blacklisted by CBL My qmail toaster box keeps getting blacklisted by the CBL. Since the CBL doesn't really give me anything as far as evidence to what they have found, I'm not really sure where to start troubleshooting this issue. Can anyone give me some suggestions as to what I need to check on the toaster to make sure my configuration is correct? Jeremy Carrigan - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Unofficial IRC Channel: #QmailToaster on Freenode
3 thumbs up now! jeremy - Original Message - From: Shai [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, April 19, 2006 6:32 PM Subject: Re: [qmailtoaster] Unofficial IRC Channel: #QmailToaster on Freenode On 4/20/06, Erik Espinoza [EMAIL PROTECTED] wrote: Hey Guys, Hope you guys don't feel this is spam, but feel free to stop in on irc://irc.freenode.net/#QmailToaster (irc.freenode.net in #QmailToaster). My nickname is (unsurprisingly) KaBewM. A few of the usual suspects, such as Shai and Jeremy and I are attempting to get a realtime forum going for the QmailToaster community. Thanks, Erik Two thumbs up !! Shai - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Unofficial IRC Channel: #QmailToaster on Freenode
you can use Mirc, bitchx, xchat, all of those are clients. If you have trillian you can too, find your trillian irc plugin. Do /server irc.freenode.net then /join #qmailtoaster - Original Message - From: Jack D. Martin Jr. [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, April 19, 2006 7:35 PM Subject: RE: [qmailtoaster] Unofficial IRC Channel: #QmailToaster on Freenode OK - I don't want to seem stupid, but how can I use IRC? I use Trillian and Yahoo an awful lot, but never IRC. Somebody interested in telling me how. Jack When you make a mistake, there are only three things you should ever do about it: 1. Admit it. 2. Learn from it, and 3. Don't repeat it. - Paul Bear Bryant -Original Message- From: jeremy [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 19, 2006 2:41 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] Unofficial IRC Channel: #QmailToaster on Freenode 3 thumbs up now! jeremy - Original Message - From: Shai [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, April 19, 2006 6:32 PM Subject: Re: [qmailtoaster] Unofficial IRC Channel: #QmailToaster on Freenode On 4/20/06, Erik Espinoza [EMAIL PROTECTED] wrote: Hey Guys, Hope you guys don't feel this is spam, but feel free to stop in on irc://irc.freenode.net/#QmailToaster (irc.freenode.net in #QmailToaster). My nickname is (unsurprisingly) KaBewM. A few of the usual suspects, such as Shai and Jeremy and I are attempting to get a realtime forum going for the QmailToaster community. Thanks, Erik Two thumbs up !! Shai - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.4.4/318 - Release Date: 4/18/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.4.4/318 - Release Date: 4/18/2006 - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] UNOFFICIAL UPDATE: spamassassin-toaster-3.1.1-1.2.12.src.rpm
I believe you need to enter your dist instead of $DIST, so if you had REDHAT you would write rpmbuild --rebuild --with REDHAT spamassassin-toaster-3.1.1-1.2.12.src.rpm if you use slackware, or another dist, just replace that. jer - Original Message - From: Mohankumar [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Cc: [EMAIL PROTECTED] Sent: Wednesday, April 12, 2006 7:54 AM Subject: RE: [qmailtoaster] UNOFFICIAL UPDATE: spamassassin-toaster-3.1.1-1.2.12.src.rpm Hi Erik, I am new to this qmail toaster, while update the spamassassin i am getting the following error rpmbuild: no packages files given for rebuild, what can i do for this? G.Mohankumar -Original Message- From: Erik Espinoza [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 11, 2006 6:48 AM To: qmailtoaster-list@qmailtoaster.com Subject: [qmailtoaster] UNOFFICIAL UPDATE: spamassassin-toaster-3.1.1-1.2.12.src.rpm Greetings, I have released an update for the SpamAssassin package. It is available at my usual page: http://www.kabewm.com/pages/qmailtoaster.php UPDATE PROCEDURE: # rpmbuild --rebuild --with $DIST spamassassin-toaster-3.1.1-1.2.12.src.rpm # service qmail stop # rpm -e --nodeps spamassassin-toaster # rpm -Uhv /usr/src/redhat/RPMS/$ARCH/spamassassin-toaster-3.1.1-1.2.12.$ARCH.rpm # /var/qmail/bin/simscanmk -g # service qmail start This update should take a few minutes to update and will not have any adverse effects. As usual, any package on my site will be signed by my RPM key. Thanks, Erik A. Espinoza - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] qmailtoaster on irc
Just in case you all didnt know.. Erik and I have been hanging in #qmailtoaster in irc.freenode.net Yes we have been lonely... as its just been us. Feel free to come and chat, ask questions, share the wisdom of qmail-toaster! Anyway... hopefully we will see you there! jeremy
Re: [qmailtoaster] UNOFFICIAL UPDATE: clamav-toaster-0.88.1-1.2.12.src.rpm
odd.. i get this error rpmbuild --rebuild --with $DIST clamav-toaster-0.88.1-1.2.12.src.rpm rpmbuild: no packages files given for rebuild any ideas? keep in mind im still on my first coffee so maybe im missign something. jer On Apr 7, 2006, at 1:28 AM, Erik Espinoza wrote: I have just released an unofficial update for the ClamAV package. As usual, this package is available at my QmailToaster page: http://www.kabewm.com/pages/projects/qmailtoaster.php This is a security fix, and it is recommended that you install it asap. Procedure: # rpmbuild --rebuild --with $DIST clamav- toaster-0.88.1-1.2.12.src.rpm # qmailctl stop # rpm -e clamav-toaster # rpm -Uhv /usr/src/redhat/RPMS/$ARCH/clamav-toaster*.rpm # /var/qmail/bin/simscanmk -g # qmailctl start - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] UNOFFICIAL UPDATE: clamav-toaster-0.88.1-1.2.12.src.rpm
well.. and here i thought i had that alias set up... well... it works now. thanks jason btw, im done my coffee i think i need another. jer - Original Message - From: jason p [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Friday, April 07, 2006 11:54 AM Subject: RE: [qmailtoaster] UNOFFICIAL UPDATE: clamav-toaster-0.88.1-1.2.12.src.rpm Try replacing $DIST with your distro (I.E. cnt40 for centos 4.x). Also make sure that you are in the same directory as the rpm file. Jason -Original Message- From: jeremy [mailto:[EMAIL PROTECTED] Sent: Friday, April 07, 2006 8:48 PM To: qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] UNOFFICIAL UPDATE: clamav-toaster-0.88.1-1.2.12.src.rpm odd.. i get this error rpmbuild --rebuild --with $DIST clamav-toaster-0.88.1-1.2.12.src.rpm rpmbuild: no packages files given for rebuild any ideas? keep in mind im still on my first coffee so maybe im missign something. jer On Apr 7, 2006, at 1:28 AM, Erik Espinoza wrote: I have just released an unofficial update for the ClamAV package. As usual, this package is available at my QmailToaster page: http://www.kabewm.com/pages/projects/qmailtoaster.php This is a security fix, and it is recommended that you install it asap. Procedure: # rpmbuild --rebuild --with $DIST clamav- toaster-0.88.1-1.2.12.src.rpm # qmailctl stop # rpm -e clamav-toaster # rpm -Uhv /usr/src/redhat/RPMS/$ARCH/clamav-toaster*.rpm # /var/qmail/bin/simscanmk -g # qmailctl start - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] irc hangout for toaster
Where do i find you guys on IRC. I have been looking on irc.freenode.net but cant seem to find any qmail toaster chans. jer
RE: [qmailtoaster] max number of rcpt
Yes, I have restarted Qmail but not rebooted the machine. On Tue, 2006-02-28 at 14:09 +0800, Riezal Ross wrote: Just to check, have you restarted Qmail after changing those values? Regards, Riezal Ross -Original Message- From: Jeremy Runner [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 28, 2006 12:14 PM To: qmailtoaste-list Subject: [qmailtoaster] max number of rcpt I am using qmailtoaster on my server and it has been working great. Lately an employee it trying to send out a large email group and only a few go through before the following messages appear in the smtp logs: max number of allowed rcpt max number of recipients rcpt ignored, session over INTRUSION threshold I have already set the following: ,CHKUSER_RCPTLIMIT=250,CHKUSER_WRONGRCPTLIMIT=100 in the tcp.smtp with no apparent change. How can I fix this? Thanks, Jeremy - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] max number of rcpt
I am using qmailtoaster on my server and it has been working great. Lately an employee it trying to send out a large email group and only a few go through before the following messages appear in the smtp logs: max number of allowed rcpt max number of recipients rcpt ignored, session over INTRUSION threshold I have already set the following: ,CHKUSER_RCPTLIMIT=250,CHKUSER_WRONGRCPTLIMIT=100 in the tcp.smtp with no apparent change. How can I fix this? Thanks, Jeremy - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] chkuser problem
Lately I am having users complain that they cannot send email to any domain other than ours. I checked the /var/log/qmail/smtp logs and it shows that they authenticate but then says relaying not allowed. I'm not sure what would have changed or why they cannot sent out mail. Where should I begin to troubleshoot? Thanks.
Re: [qmailtoaster] Multiple problems
Probably those annoying receipt confirmations everyone gets with every one of your posts. - Original Message - From: Jack D. Martin Jr. [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Thursday, October 13, 2005 11:15 AM Subject: [qmailtoaster] Multiple problems For some reason I had to re-subscribe to the list, did I do something to tick somebody off? ;-) I installed on Mandrake 10.2, it appeared to be successful. It looks like I have created a major mess, any help would be appreciated. I have numbered the 4 problems below so they wouldn't get lost in all of the mess. I probably should have sent multiple emails, but am just about at my wits end with Linux in general, so I combined them, hoping that maybe they are related somehow. 1. When I start the toaster, I can't change the password. 2. I can send email but not receive, I shut off the firewall, no change. My log says this: [EMAIL PROTECTED] magicwisp]# tail /var/log/qmail/smtp/current @4000434e2c9c084cee6c tcpserver: status: 0/100 @4000434e75d32434361c tcpserver: status: 1/100 @4000434e75d32441075c tcpserver: pid 27751 from 64.200.163.164 @4000434e75d3244627dc tcpserver: ok 27751 proliant1.magicwisp.com:65.77.22.242:25 :64.200.163.164::13469 @4000434e75d5339957cc CHKUSER accepted rcpt: from [EMAIL PROTECTED]:: remote enttule202.ad.wcg.com:unknown:64.200.163.164 rcpt [EMAIL PROTECTED] : found existing recipient @4000434e75d610208464 tcpserver: end 27751 status 0 @4000434e75d610209fbc tcpserver: status: 0/100 The bounce message says this: Hi. This is the qmail-send program at magicwisp.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. [EMAIL PROTECTED]: Sorry, no mailbox here by that name. (#5.1.1) --- Below this line is a copy of the message. Return-Path: [EMAIL PROTECTED] Received: (qmail 27757 invoked by uid 89); 13 Oct 2005 14:57:16 - Received: by simscan 1.1.0 ppid: 27751, pid: 27753, t: 0.3586s scanners: clamav: 0.87/m:34/d:1082 spam: 3.1.0 X-Spam-Checker-Version: SpamAssassin 3.1.0 (2005-09-13) on proliant1.magicwisp.com X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=none autolearn=ham version=3.1.0 Received: from unknown (HELO enttule202.ad.wcg.com) (64.200.163.164) by proliant1.magicwisp.com with SMTP; 13 Oct 2005 14:57:15 - Received-SPF: none (proliant1.magicwisp.com: domain at wiltel.com does not designate permitted sender hosts) Received: from mail pickup service by enttule202.ad.wcg.com with Microsoft SMTPSVC; Thu, 13 Oct 2005 09:57:13 -0500 Received: from EXCHANGE4.ad.wcg.com ([10.21.33.40]) by enttule202.ad.wcg.com with Microsoft SMTPSVC(5.0.2195.6713); Thu, 13 Oct 2005 09:57:13 -0500 X-MimeOLE: Produced By Microsoft Exchange V6.0.6487.1 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 Subject: Test Date: Thu, 13 Oct 2005 09:57:11 -0500 Message-ID: [EMAIL PROTECTED] X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Test Thread-Index: AcXQBmO4F/c/y/rLQaG4P9tDwamnHQ== From: Martin, Jack [EMAIL PROTECTED] To: [EMAIL PROTECTED] Return-Path: [EMAIL PROTECTED] X-CTCH-ID: _D48A1584-71AB-4DE6-809B-CAEA68C127B0_ X-CTCH-RefID: 0 X-CTCH-Action: Ignore X-OriginalArrivalTime: 13 Oct 2005 14:57:13.0265 (UTC) FILETIME=[64FD9A10:01C5D006] VGVzdA0K 3. The qmail admin button goes to this: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [EMAIL PROTECTED] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache-AdvancedExtranetServer/2.0.53 (Mandriva Linux/PREFORK-9.2.102mdk) mod_ssl/2.0.53 OpenSSL/0.9.7e PHP/4.3.10 mod_perl/1.999.21 Perl/v5.8.6 Server at magicwisp.com Port 80 4. The admin-toaster page shows nothing except this: Warning: fopen(): SAFE MODE Restriction in effect. The script whose uid is 0 is not allowed to access qmailmrtg.module owned by uid 75 in /usr/share/toaster/include/admin.inc.php on line 137 Warning: fopen(qmailmrtg.module): failed to open stream: Success in /usr/share/toaster/include/admin.inc.php on line 137 Warning: filesize(): SAFE MODE Restriction in effect. The script whose uid is 0 is not allowed to access qmailmrtg.module owned by uid 75 in /usr/share/toaster/include/admin.inc.php on line 138 Warning: fread(): supplied argument is not a valid stream resource in /usr/share/toaster/include/admin.inc.php on line 138 Warning: fclose(): supplied argument is not a valid stream resource in /usr/share/toaster/include/admin.inc.php on line 139 Warning: fopen(): SAFE MODE Restriction in effect. The script whose uid is 0
[qmailtoaster] Getting Errors in Centos 4 Re: [qmailtoaster] UPDATES: vqadmin-toaster qmailadmin-toaster
- Original Message - From: Nick Hemmesch [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, September 21, 2005 12:25 PM Subject: [qmailtoaster] UPDATES: vqadmin-toaster qmailadmin-toaster Hi, I just placed the following packages on the site for download: vqadmin-toaster-2.3.6-1.2.6.src.rpm - Fixed user account controls so accounts may be properly administered for allowing/denying users access to their mail accounts. qmailadmin-toaster-1.2.9-1.2.8.src.rpm - Fixes some language problems and provides a new, easy access point to change user password. Thanks for the clamav update from Erik. I just arrived home and have some business to attend to but, will check it out tonight. Thanks again . . . Regards, Nick Hello all, I'm getting the following errors while trying to install your new vqadmin-toaster. checking whether build environment is sane... yes /usr/src/redhat/BUILD/vqadmin-2.3.6/missing: Unknown `--run' option Try `/usr/src/redhat/BUILD/vqadmin-2.3.6/missing --help' for more information configure: WARNING: `missing' script is too old or missing checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... Invalid configuration `i686-redhat-linux-gnu': machine `i686-redhat-linux' not recognized configure: error: /bin/sh ./config.sub i686-redhat-linux-gnu failed error: Bad exit status from /var/tmp/rpm-tmp.95217 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.95217 (%prep) - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Unofficial Update: clamav 0.87
- Original Message - From: Erik Espinoza [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, September 20, 2005 12:47 PM Subject: [qmailtoaster] Unofficial Update: clamav 0.87 Greetings, It appears as though quite a few security related issues were found in clamav 0.86.2. As such I have created an update to clamav 0.87. It is available at the usual place: http://kabewm.landshark.net/pages/projects/qmailtoaster.php As always, my packages are signed by my public key. Thanks, Erik Hello, Thanks for the update Erik. May want to check it though. It tries to use your user and group. Installing clamav-toaster-0.87-1.2.6.src.rpm warning: user espinoza does not exist - using root warning: group espinoza does not exist - using root Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.4646 Works anyways though, just though maybe you wouldn't want that info spread everywhere. Jeremy - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] qmailctl spamd problem
If I do a qmailctl restart or a qmailctl stop then qmailctl start, spamd never restarts. I have to reboot to get it to come back online. Is there something I can do to fix this? Thanks.
Re: [qmailtoaster] qmailctl spamd problem
Thanks. Your script works fine. Can you forsee a problem if I combine the two scripts so that qmailctl would properly start|stop|restart|etcspamd, so that one script controls the entire toaster. I looked at it a bit and it and I think I could do it easily enough? Thanks again. - Original Message - m From: Jake Vickers [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Wednesday, September 14, 2005 2:24 PM Subject: Re: [qmailtoaster] qmailctl spamd problem Jeremy Runner wrote: If I do a qmailctl restart or a qmailctl stop then qmailctl start, spamd never restarts. I have to reboot to get it to come back online. Is there something I can do to fix this? Thanks. I wrote a small script to start/stop spamd with the QMail Toaster package: http://jakev.com/qmail under spamd script. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[qmailtoaster] Upgrade Help
I am noticing that there are newer packages for zlib, squirrelmail, qmailadmin, maildrop, and spamassassin than what I'm running on my server. Can I upgrade only these packages without doing a complete upgrade? I already upgraded clamav and it seemed to workfine. Thanks for all the help.
Re: [qmailtoaster] Upgrade Help
Thanks, I'll give it a shot. - Original Message - From: Jake Vickers [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Thursday, September 08, 2005 2:27 PM Subject: Re: [qmailtoaster] Upgrade Help Jeremy Runner wrote: I am noticing that there are newer packages for zlib, squirrelmail, qmailadmin, maildrop, and spamassassin than what I'm running on my server. Can I upgrade only these packages without doing a complete upgrade? I already upgraded clamav and it seemed to work fine. Thanks for all the help. You should be able to upgrade those packages only, by rebuilding them then rpm -Uvh to upgrade them. If it fails, it will say why (or what dependency was required), and it can be figured out from there. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Alternate SMTP server
Thanks. It's working great. - Original Message - From: Erik Espinoza [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Monday, September 05, 2005 11:05 PM Subject: Re: [qmailtoaster] Alternate SMTP server echo :mail.isp.net /var/qmail/control/smtproutes ; service qmail restart On 9/5/05, Jeremy Runner [EMAIL PROTECTED] wrote: I'm having a problem with domains such as AOL and NETSCAPE blocking emails from my domain. I read something about them doing that to small domains such as mine. What would I need to do to have my server sent all outgoing mail through my isp's smtp server. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.18/89 - Release Date: 9/2/2005 - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
