RE: [Repeater-Builder] Re: Wouxun Radio
Hello Repeater-Builder Group! IMHO, in the spirit of this GROUP, let's build some repeaters and send the Wouxun handy/talkie Radio discussion over to a young, growing GROUP devoted to that radio: wouxun_kg-uvd1p-subscr...@yahoogroups.com '73 kc5ozh It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett III: 147.390 + 85.4 KC5OZH-R EchoLink Node: 350616 K5FER-L EchoLink Node: 394575 Rowlett R.A.C.E.S. Unit 808 ARO-Equipment http://www.CharliesElectronics.com
RE: [Repeater-Builder] Re: Wouxun Radio
Try this: FCC ID: WVTWOUXUN04 Wouxun model: KG-UVD1P CE FCC Approved http://www.wouxun.com/Two-Way-Radio/KG-UVD1P.htm 73 Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett III: 147.390 + 85.4 KC5OZH-R EchoLink Node: 350616 K5FER-L EchoLink Node: 394575 Rowlett R.A.C.E.S. Unit 808 ARO-Equipment http://www.CharliesElectronics.com Original Message Subject: RE: [Repeater-Builder] Re: Wouxun Radio From: Eric Lemmon wb6...@verizon.net Date: Sun, August 29, 2010 10:54 am To: Repeater-Builder@yahoogroups.com Phil, What FCC identification number did you use to find the Wouxun listing on the FCC site? I tried both the name and the model number, but came up with no listing at all. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of kg6ziu Sent: Sunday, August 29, 2010 8:38 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: Wouxun Radio Terry, I wondered the same question about a year ago and discovered that they are type-accepted. Not that I would allow one on a system that I was in charge of for PS work. I looked on the FCC website and saw that they were... There is nothing saying that they can't be used on a HAM system though. Hope this helps, Phil KK6PE --- In Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com , terry dalpoas km...@... wrote: This may be a dumb question, but I'll ask anyway. I saw some dual band portables on eBay, new for about $100, made by Wouxun. I doubt very much they are FCC type accepted. Is it okay to use these on amateur frequencies? Thanks in advance. Terry, KM5UQ
RE: [Repeater-Builder] Nice article on the Molotora Gontor
Its Molotora, April Fool, not Motorola :-} It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett III: 147.390 + 85.4 KC5OZH-R EchoLink Node: 350616 K5FER-L EchoLink Node: 394575 Rowlett R.A.C.E.S. Unit 808 ARO-Equipment http://www.CharliesElectronics.com Original Message Subject: Re: [Repeater-Builder] Nice article on the Molotora Gontor From: AA8K73 GMail aa8...@gmail.com Date: Thu, April 01, 2010 11:43 am To: Repeater-Builder@yahoogroups.com It's Motorola, not Icom :) George Henry wrote: I see it doesn't do D-STAR :-) George, KA3HSW / WQGJ413
RE: [Repeater-Builder] Tool needed for removing Potentiometer nuts
Hello Thomas and the Grtoup! The tool you are looking for is called a spanner wrench. Vertex parts department should have it in-stock for your particular radio. '73 Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: [Repeater-Builder] Tool needed for removing Potentiometer nuts From: Thomas Oliver [EMAIL PROTECTED] Date: Fri, July 11, 2008 1:02 am To: repeater-builder@yahoogroups.com I have a yaesu FT-60 handheld that has a noisy volume pot and need to change it, the nuts have slots on the top side of the nut 180 degrees apart and I can not get needle nose pliers on them so I need the correct tool. Anybody know what they are called and where to get one? tom n8ies
[Repeater-Builder] F'S (DALLAS,TX) DB224-A
Hello Group! Two of the Decibel DB224-A antennas have been donated to me for the purpose of funding improvements to my Amateur-use machines. Recently taken from tower service because of digital upgrading on their 154 MHz systems. They are for sale, local pick-up in the Dallas, Texas area. Each has a harness and a set of pole clamps. Name Tags faded/unrecognizable. If interested, please respond off-list for asking price, results of antenna analyzer, or wanted trading goodies for these antennas. '73 and Thank You all for looking! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com
RE: [Repeater-Builder] VXR-7000 Troubles
Hello All and KFD29 IMHO, if you pose your questions to the Groupyou may find a quicker and more knowledgeable response to your problems with the VXR-7000; rather than having individuals email you and ask you what is wrong! That is one of the reasons we share in a Group. You may even want to include your name if nothing else.. Happy Repeating! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: [Repeater-Builder] VXR-7000 Troubles From: [EMAIL PROTECTED] Date: Thu, March 27, 2008 7:44 pm To: Repeater-Builder@yahoogroups.com Having some issues w/ a VXR-7000, email me at [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) if you are familiar w/ this model and would be willing to help!
RE: [Repeater-Builder] Eclipse Repeaters
Hello Luke and the Group! Go here to this link: http://rftechnology.com.au/downloads/ Look for: sm2k_v2.2.3.exe ServiceMonitor 2000 v2.2.3 (458K) Program install file Enjoy! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: [Repeater-Builder] Eclipse Repeaters From: Luke [EMAIL PROTECTED] Date: Tue, February 19, 2008 9:38 pm To: Repeater-Builder@yahoogroups.com Hello everyone, Just searching around for the software for the RF-Technologies Eclipse Series repeaters. I think the program is called System Monitor 2000 for Windows, it used to be on my old laptop that has now died. Our CBRS repeater is needing some attention and prob re-tuning. Rx sensitivity is down in the dumps, and just isn't going to cut it. Brand new feedlines and Hydrator, but Rx side still very, very average. Thankyou all very much for your time, and I hope your repeater projects all go to plan, unlike some of mine, hahaha. Cheers, Luke.
RE: [Repeater-Builder] Manual
Hello Jack and the GROUP! A quick google search brought up this link: http://www.freeinfostuff.com/ Looks like it has a rough copy of what you seek, and then some! Hope this helps Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: [Repeater-Builder] Manual From: Jack Davis [EMAIL PROTECTED] Date: Tue, January 15, 2008 10:30 am To: Repeater-Builder@yahoogroups.com Does anyone have a service manual for a Ramsey COM-3 service monitor? I have one that works but the signal output falls off at lower frequencies. It is fine above 700 MHz but drops 15 db at 150 MHz. I would certainly pay for a copy. Thanks, Jack K6YC
RE: [Repeater-Builder] RF Connector for GM300
Affirmative!! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: [Repeater-Builder] RF Connector for GM300 From: Bernie Hunt [EMAIL PROTECTED] Date: Sun, January 13, 2008 3:50 pm To: Repeater-Builder@yahoogroups.com This may be a silly question, but what is the RF connector called on a GM300. Is it a miniture UHF? Thanks, Bernie
RE: [Repeater-Builder] Tower Installation labor rate?
Hello Group! If you are referring to personnel that do antenna/hard-line type install and maintenance on towers, I have recently dealt with two different companies in the Dallas, Texas area that did some work on a 130 foot water tower. One company charged $95.00 and the other charged $125.00 per person, per hour, for what they accomplished on this height/kind of tower. '73 Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: [Repeater-Builder] Tower Installation labor rate? From: Jack Taylor [EMAIL PROTECTED] Date: Tue, January 08, 2008 7:08 pm To: Repeater-Builder@yahoogroups.com Guy's, anyone know what the current hourly wage that tower maintenance types charge? 73 de Jack - N7OO
[Repeater-Builder] WTB in Dallas,Tx - Antennas and Hard-line
WTB in Dallas,Tx - Antennas and Hard-line Hello to the Group! Charlie Mumphrey here, Kc5ozh, a member of the Rowlett, Texas R.A.C.E.S. Our RACES Team has been allowed space on a new 130 FT water tower, for relocation of our analog communication equipment. We are looking for A useable VHF and UHF antennas and hard-line for HAM Freqs, to crown the top of this tower. If available, or further questions, Please contact me direct by email, with brand, model, price and availability for local pickup in the Dallas, Texas area. Or, if you prefer, a phone number to chit chat. I will advise you if these items will meet our needs. On behalf of the Rowlett, Texas R.A.C.E.S. and myselfThanks to Everyone, the Repeater-Builder Group for your Time and Resources! '73 Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com
RE: [Repeater-Builder] Needed: MSF-5000 Green TEE Cable
Rod! It has arrived!!! I will take some physical measurements and post to the group. I still have to get the eproms programmed, filters tuned, and figure out a CW ID circuit for my call every TEN minutes during useage. Piece of Cake! Everything else is functioning, hopefully on the air by the first week in January! I will advise when I get this machine online. Thank You Rod, again, for all your support. Rowlett R.A.C.E.S. also send their Thanks. '73 Charlie Kc5ozh It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: Re: [Repeater-Builder] Needed: MSF-5000 Green TEE Cable From: [EMAIL PROTECTED] Date: Wed, November 14, 2007 11:36 pm To: Repeater-Builder@yahoogroups.com Cc: [EMAIL PROTECTED] Hello to the Group! I have seen this subject come up many times here on our list. Now, looks like I am in need also! I have acquired an analog MSF-5000 with a missing TEE Cable. I plan on using one antenna for this repeater, and hook back original to the internal filter/duplexer and receiver. I was wondering if anyone has had efficient results with making a replacement Combining TLE5732A TEE Cable, instead of paying Mama Mo the suggested retail 214 dollars for one of the 16, NOS, they have left. Let me look in my stuff, I think I saw one the other day. I will get back with you tomorrow. If I do have one its yours. Rod kc7vqr
[Repeater-Builder] Needed: MSF-5000 Green TEE Cable
Hello to the Group! I have seen this subject come up many times here on our list. Now, looks like I am in need also! I have acquired an analog MSF-5000 with a missing TEE Cable. I plan on using one antenna for this repeater, and hook back original to the internal filter/duplexer and receiver. I was wondering if anyone has had efficient results with making a replacement Combining TLE5732A TEE Cable, instead of paying Mama Mo the suggested retail 214 dollars for one of the 16, NOS, they have left. Repeater-Builder shows approximate wavelengths for TX and RX legs of this cable, any idea on the T box splice? Shielded, close connect as possible! No caps.? Or, any used one for sale? Thank You all for for your time and resources! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com
RE: [Repeater-Builder] Motorola R100 Cabinet Key
The six R100S' that I have, use the 2135 key! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Repeater System: Rowlett Main: 441.325 MHz + 162.2 Dallas: 441.950 MHz + 162.2 Rowlett II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: [Repeater-Builder] Motorola R100 Cabinet Key From: Eric Lemmon [EMAIL PROTECTED] Date: Sun, September 16, 2007 3:48 pm To: Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED], [EMAIL PROTECTED], 'Discussion of equipment manufactured by Motorola' [EMAIL PROTECTED] Does the Motorola Radius R100 repeater use a standard 2135 key for the cabinet lock, or something else? 73, Eric Lemmon WB6FLY Yahoo! Groups Links
RE: [Repeater-Builder] Re: Motorola R1225 versus Kenwood TKR-750
Hello Eric, Skipp, and the Group! I concur with rtc's PA fix scenario. That is real accurate on the procedure and results that I experienced in the many PA repair issues I have resolved in the majority of Mama Mo's Maxtracs, Gm300, and 1225 mobiles in use as-is or repeaters. A seasoned tech like you Skipp, IMHO, is not going to need a road-map to fix the obvious. I have encountered many Comm Sales People REPLACE repeaters and mobiles with these types of PA failures. I guess that keeps us techs with something to do and more refurbished product to sell. Have Fun doing what we do best, Fixing Stuff! I love my job {hobby}! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 MHz + 162.2 Kc5ozh Dallas Repeater: 441.950 MHz + 162.2 Kc5ozh Rowlett Repeater II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org http://www.emergency-radio.org Original Message Subject: [Repeater-Builder] Re: Motorola R1225 versus Kenwood TKR-750 From: rtc_0001 [EMAIL PROTECTED] Date: Sat, July 14, 2007 11:03 pm To: Repeater-Builder@yahoogroups.com It's not so much a defect as it is asking the rptr to do more than it was designed for. It may be a 45 watt PA but in rptr use, medium to HD rptr use, drop it down to about 25 to 30 watts out of the PA. Enjoy what you get thru the duplexer. Asking for more will melt the PA. The earlier units had a temp controlled fan that only came on when the PA was about to melt. The next generation of power supplies came with a switch to turn the fan on permanently. You will probably be able to fix them without the manual. Most of the time the PA transistor collector got hot, melted the solder the chip caps moved (slid down the pcb due to gravity). I repaired these on a regular basis without needing new parts unless the damage literaly burnt the pcb around the collector lead. I removed the chip caps, removed the solder on the collector tab trace resoldered it all back in with silver solder. This, along with turning the factory output down, made them last a long time even under HD casino use. I think it took me maybe 45-60 mins to get it all apart, fix it, reassemble, reinstall. Lots of times I did it in place at the customer's premises. rtc -Original Message- From: Repeater-Builder@yahoogroups.com mailto:Repeater-Builder@yahoogroups.com Sent: Friday, July 13, 2007 11:08 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: Motorola R1225 versus Kenwood TKR-750 Hi Eric, SNIP I just pulled three 1225 uhf repeaters from two different locations and they all have the same failed tx pa problems. Wonder if there's a minor pa defect problem (like there was in early version one tkr repeaters) or it's just bad customer karma time. I've got to find a service manual before we open them up... cheers, skipp
RE: [Repeater-Builder] Zetron
Hey John and the Group! You may want to do a little more reading of this groups bible. IMHOTry this link: http://www.repeater-builder.com/zetron/zetron-model-38A025-9043Y.pdf Might be a little easier than someone telling you the many codes... Enjoy! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 MHz + 162.2 Kc5ozh Dallas Repeater: 441.950 MHz + 162.2 Kc5ozh Rowlett Repeater II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org http://www.emergency-radio.org Original Message Subject: [Repeater-Builder] Zetron From: Maire-Radios [EMAIL PROTECTED] Date: Sat, July 14, 2007 1:59 pm To: Repeater-Builder@yahoogroups.com can any tell me the default program codes for the: Zetron model 38 and Zetron model 38A thank you, John
RE: [Repeater-Builder] Hello...
Drop by one of this group's sponsers! http://www.repeater-builder.com '73 Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 MHz + 162.2 Kc5ozh Dallas Repeater: 441.950 MHz + 162.2 Kc5ozh Rowlett Repeater II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org http://www.emergency-radio.org Original Message Subject: [Repeater-Builder] Hello... From: lou_c1357 [EMAIL PROTECTED] Date: Tue, July 03, 2007 9:06 am To: Repeater-Builder@yahoogroups.com Hello all. Just joined the group, and looking forward to getting all the information that I can. I am looking at a long term project, and want to put up a repeater. I want to know where do I get started?? I am looking for the basics first, and then move along from there. 73 Lou KC2RVD
RE: [Repeater-Builder] Ericcson Repeater?
Hello Steven and the Group! Try this link: http://www.hallelectronics.com/getech/sx2.htm Google-ing does wonders! Hope this helps... '73 Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 MHz + 162.2 Kc5ozh Dallas Repeater: 441.950 MHz + 162.2 Kc5ozh Rowlett Repeater II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org http://www.emergency-radio.org Original Message Subject: [Repeater-Builder] Ericcson Repeater? From: aceteamk9 [EMAIL PROTECTED] Date: Fri, June 15, 2007 6:42 am To: Repeater-Builder@yahoogroups.com Hello - and thanks in advnace for your response. I aquired a GE MASTR III repeater and don't know what band it is on or anything about it. The model is SXHM01. Serial Number 1619356 Can anyone provide information as to what band or output power this repeater is. Thanks! Steven
RE: [Repeater-Builder] UPS
IMHO, Don, If this is your requirements, you may need to think about going to a straight battery back-up. $200.00 may make a good downpayment on a UPS that will give you any type of repeater running time. Happy Hunting Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 MHz + 162.2 Kc5ozh Dallas Repeater: 441.950 MHz + 162.2 Kc5ozh Rowlett Repeater II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org http://www.emergency-radio.org Original Message Subject: [Repeater-Builder] UPS From: Don Kupferschmidt [EMAIL PROTECTED] Date: Wed, May 23, 2007 11:37 am To: Repeater-Builder@yahoogroups.com Hello all, I'm in the process of rebuilding one of my repeaters and I'm looking to place a UPS in line for backup. I'm looking for information on make and models - what's good and what to stay away from. The VA range is 1300 to 1500, and I'm willing to spend no more than $200.00. Thoughts and comments appreciated. TIA, Don, KD9PT
RE: [Repeater-Builder] Motorola R100 repeater
http://www.batlabs.com Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 MHz + 162.2 Kc5ozh Dallas Repeater: 441.950 MHz + 162.2 Kc5ozh Rowlett Repeater II: 441.950 MHz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org http://www.emergency-radio.org Original Message Subject: [Repeater-Builder] Motorola R100 repeater From: Mr John Lloyd [EMAIL PROTECTED] Date: Tue, April 24, 2007 7:21 pm To: Repeater Builders repeater-builder@yahoogroups.com Cc: John Lloyd [EMAIL PROTECTED] I have acquired a Motorola R100 repeater and I am trying to find out its capabilities. Do anyone know if the Motorola R100 repeater will tune down to the 434 MHz part of the amateur band? Will it program to an offset other than 5 Mhz? Is programming software available for this? Where can it be found? Is the programming software and cables only available from Motorola? I can tune the RF stages of the repeater and I have all the necessary RF test gear to do this. I need to find out how to program the amateur frequencies, get the software or find out where to get this done. Thank You, John Lloyd, K7JL __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Yahoo! Groups Links
RE: [Repeater-Builder] Printing from RSS
Just a thought. Have you set-up your printer / print drivers, to print from DOS, instead of Windows? Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Kc5ozh Rowlett Repeater II: 441.950 Mhz + 110.9 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org/ Original Message Subject: [Repeater-Builder] Printing from RSS From: Roger White [EMAIL PROTECTED] Date: Sat, December 30, 2006 5:40 pm To: Repeater-Builder@yahoogroups.com I am trying to print a copy of a codeplug for my MSF5000 repeater, but have not been successful. I keep getting an error on the RSS screen when I hit the F key to print that says the printer is not ready. I have it hooked up successfully to the laptop (Sony Vaio 1 GHz) and it is printing OK on other files (Windows stuff of course). I can't get past the error code. I must be doing something wrong. Any suggestions? Roger W5RD
RE: [Repeater-Builder] FLAT AUDIO -- GM300 / MAXTRAC
I think, in the program/software, Aux Pin 5 is Flat Tx Audio..of the 16 pin connector! Charlie"It is not the class of license the Amateur holds, but the class of the Amateur that holds the license."Charles MumphreyAmateur Radio Station Kc5ozhKc5ozh Rowlett Repeater: 441.325 Mhz + 162.2Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2Rowlett R.A.C.E.S. Unit 823http://www.CharliesElectronics.comhttp://www.hello-radio.org/ Original Message Subject: [Repeater-Builder] FLAT AUDIO -- GM300 / MAXTRACFrom: [EMAIL PROTECTED]Date: Fri, April 28, 2006 11:53 amTo: Repeater-Builder@yahoogroups.com Hi all! Maybe I'm going blind (after reading all the small print of the manual)! or I just missed it somewhere... On the GM300 or Maxtrac: Is there a software spot or a control switch that send flat audio to the 16 pin accessory connector rather than pre-emp audio? Thanks Brian, WD9HSY YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] CDM1550LS Program
Hello group, I have two CDM1550LS, 450-512 split, would like to program for a conventional Ham freq repeater. The local COM SHOP says the software and normal keystroke tricks will not work. Are they correct, or is a legal fix available? Thank You for your time and resources! Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org/ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] CDM1550LS Program
Thanks again to everyone that replied to and viewed my question. We all agree that the CDM1550LS cannot be programmed for use on Ham freqs! '73 Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org/ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: R�f. : RE: [Repeater-Builder] motorola r-100 problem
jacques Did you remember to plug in your shorting/dummy mic plugs back into the mic jax, enabling it to re-transmit audio? ANd/or push the enable button on the HLN rick controller? '73 Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org/ Original Message Subject: RE: Réf. : RE: [Repeater-Builder] motorola r-100 problem From: gervais fillion [EMAIL PROTECTED] Date: Thu, April 13, 2006 10:41 pm To: Repeater-Builder@yahoogroups.com jacques ecrit moi direct [EMAIL PROTECTED] 73/s great week end gervais Original Message Follows From: jacques fraser [EMAIL PROTECTED] Reply-To: Repeater-Builder@yahoogroups.com To: Repeater-Builder@yahoogroups.com Subject: Réf. : RE: [Repeater-Builder] motorola r-100 problem Date: Wed, 12 Apr 2006 21:45:10 -0400 (Est) No,I not change the frequencies for the ham band. What I do not understand, when I push the ptt button, the repeater transmit ok? And he passes on with the good frequency! I do not find why he does not want to pass on by himself. I verify switches and that seem correct. That seems to be a problem of reception. Or I do not make thing Correctly. I do not know any more what to make. And I not changed the original frequency.cannot be a problem Of VCO or of the duplexer. Thank you for your help ---Message original--- De : N9WYS Date : 04/12/06 20:37:59 A : 'jacques fraser' Cc : Repeater-Builder@yahoogroups.com Sujet : RE: [Repeater-Builder] motorola r-100 problem Jacques, Did you change the frequency into the ham band? If so, the VCO may need to be changed to allow the new frequency to operate. Also, you probably need to re-tune the duplexer if it came with one. Both of the R-100's I have came with mobile-type duplexers attached to the cover. What frequency was originally in it and what frequency did you program into it? Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of jerrepotable Sent: Wednesday, April 12, 2006 3:24 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] motorola r-100 problem Hello, I have Motorola r-100. The problem, the repeater is programmed and he does not want Worked? I do not know this repeater a lot. I program it and he is ineffective. I look for a trick to put on him thank you jacques Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Decibel Hybrid Combiner Question
Please contact tech support: http://www.andrew.com/contactus/tech_spprt.aspx Charlie It is not the class of license the Amateur holds, but the class of the Amateur that holds the license. Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org/ Original Message Subject: [Repeater-Builder] Decibel Hybrid Combiner Question From: Dan Blasberg [EMAIL PROTECTED] Date: Thu, April 06, 2006 11:51 am To: Repeater-Builder@yahoogroups.com Trying to find the Specs on a Decibel DB4381-b UHF Hybrid Combiner. Need to know if it can be adjusted down to the amateur band? Thanks for any info. Dan KA8YPY Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] (OT) Accessory pinouts for GM399
Mama Mo's bible: http://www.batlabs.com Charlie Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org/ Original Message Subject: Re: [Repeater-Builder] (OT) Accessory pinouts for GM399 From: Charles Schmell [EMAIL PROTECTED] Date: Thu, March 30, 2006 7:00 am To: Repeater-Builder@yahoogroups.com Gareth - Do you mean GM 300? never heard of the 399. Charles --- Gareth Bennett [EMAIL PROTECTED] wrote: Does anybody have the accessory pinouts available for the Motorola GM399 Mobile (rear option connector?) ... Or even better, a scanned manual that I could download? Thanks in advance _ Gareth Bennett Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Linking Suggestions Please
Works for me! Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org/ Original Message Subject: Re: [Repeater-Builder] Linking Suggestions Please From: [EMAIL PROTECTED] Date: Mon, March 20, 2006 1:47 pm To: Repeater-Builder@yahoogroups.com Run a condiut to the other location if it is what you say 20-30 yards away and run shielded Cat-5 and tie them together and be done with it. Get the volunteers with there shovels and picks and go to town. -- Mike K7PFJ Hi, Here's the deal. I have two sites...Site one is where my 440 hub repeater is located. Site two is where I'm planning to put a 220 snip Your suggestions? Thanks Mike K4IJ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Quick CW ID'er
I run the ID-8 also...wired up to a connector plugs right into my GR500 rick controllerworks well...but no nifty-keen frills! I am checking out this software controller, (which I have no monetary interest in). Do a google search on EchoStation or go to: http://www.synergenics.com/sc/ Just another way, enjoy! Charlie Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com http://www.hello-radio.org/ Original Message Subject: RE: [Repeater-Builder] Quick CW ID'er From: Eric Lemmon [EMAIL PROTECTED] Date: Sun, March 19, 2006 11:00 am To: Repeater-Builder@yahoogroups.com Bill, Cheap is not always best. The easy solution is a Communications Specialists ID-8, which costs about $70. Go here: http://www.com-spec.com/id8.htm Since most mobile radios have DC power at the mike connector, you can simply crimp the ID-8 flying leads into the appropriate modular plug. You may need to install a jumper inside the radio to bring the activity signal to the ID-er, so that it won't perpetually key itself. Some of the very inexpensive ID-ers have little or no RF immunity, and don't operate properly when close to the transmitter. The ID-8 is a versatile and reliable device. I have several in service. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of wa9ba Sent: Sunday, March 19, 2006 4:10 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Quick CW ID'er Has anyone came up with a cheap easy CW ID'er for a GR 500 repeater? I was hoping I could find something that would, say, plug into the mic socket that would ID every 10 minutes. Bill WA9BA Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Project advice
I have no info on the mic jax usage of Tk-805 other than to offer an alternative. If you could dig up a couple TK-840 radiosare equipped to accept the KCT-19 Accessory Connection Cable Option for connecting external equipment. Which might be electronically easier to hook up for a repeater controller than the TK-805. Do a google search on repeater controllers will turn up a few options. Also, one site of many that offer some nice controllers, and that I have no monetary interest in: http://www.nhrc.net/ Good Luck! Charlie Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Original Message Subject: [Repeater-Builder] Project advice From: Ric [EMAIL PROTECTED] Date: Fri, March 10, 2006 12:26 pm To: Repeater-Builder@yahoogroups.com I am entertaining the idea of using two kenwood 805-d mobiles to make a quick mobile GMRS repeater and need some advice on a few things; What would be the simplist, easiest controller to make this happen? Are there cables available that would run from mic connection to controller to mic connection? What would you suggest as far a duplexer for this setup? Would a 1/4 wave mag mount antennex antenna with a 6' cable run be able to handle the job from atop an SUV? Thanks so much in advance for any input on this project. Ric B. com/info/terms/ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Master III Modules
I have a set or two, NOS, of Master III Repeater modules in the UHFsplits G3 and G9. Wishing to resonably trade for a G7set, or indivdual modules, so I may assemble an open, HAMMY machine. Thanks for the looking! Charlie Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Ericsson Master III Base Station
Hello Group! I have a chance to play with a couple Ericsson Master III Base Stations... Repeater Model: SXUM01 with Band Split G3 and also G9 I have not examined the programming yet. Anyone have experience with retuning to 440 ham freqs...ie, can it be done cost effective by software, and aligningRX and TX stable and reliable without interference with any radio services? Or will I need to change out the factory modules to G7 . Thank You for your time and reources! Charlie Charles Mumphrey Amateur Radio Station Kc5ozh Kc5ozh Rowlett Repeater: 441.325 Mhz + 162.2 Kc5ozh Dallas Repeater: 441.950 Mhz + 162.2 Rowlett R.A.C.E.S. Unit 823 http://www.CharliesElectronics.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/