Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Bob, No parts list except this one which you can use to get started : http://n4iqt.com/BillRiley/DMTDMixerModulePartsList.xls Spreadsheet file or down load the free PCB express software and generate a parts list with them and files here : http://n4iqt.com/BillRiley/MixerModule_7.sch http://n4iqt.com/BillRiley/DDSModule.sch DDS board has the option for 4 distribution amps only 2 are used normally. PICTIC II board is used without the op amps and 7.5 volt regulator notes: http://n4iqt.com/BillRiley/No-interpolator.txt page 3 of this file has full parts list http://n4iqt.com/picticii/circuit-pcb.pdf If you install the interpolator it can be turned off with a software command. R25 a 10 K resistor only used with the TTL computer interface option, not used with the RS232 chip, is listed twice as 1% or 5% either will work but you don't need both. Stanley - Original Message From: Robert Darlington To: Discussion of precise time and frequency measurement Sent: Tue, September 7, 2010 5:16:46 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here ! Cool. Is there a parts list? I definitely want to build one. Looks like a really interesting project and a great opportunity for me to learn. I've been meaning to tinker with those AD DDS chips for a while. I have a dev kit for one of the models around here somewhere that I picked up for an ultrasound focusing project (sound radiation pressure was used to push blood cells to the center of a capillary tube) but all I really did was layout. No software for me on that one. -Bob On Tue, Sep 7, 2010 at 11:40 AM, Stanley Reynolds < stanley_reyno...@yahoo.com> wrote: > Yes this file: > > http://www.n4iqt.com/BillRiley/A-Small-DMTD-System.pdf > > Stanley > > > > - Original Message > From: Robert Darlington > To: Discussion of precise time and frequency measurement < > time-nuts@febo.com> > Sent: Tue, September 7, 2010 11:54:56 AM > Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards > are > here ! > > Hi Stanley, > > I'm very interested in building this project. Do you have documentation > online? I'd like to read through it then send you the $47 for the boards. > > Thanks, > Bob > > On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds < > stanley_reyno...@yahoo.com > > wrote: > > > Packing them up to take to the PO. > > Paypal to stanley_reyno...@yahoo.com > > $9.50 per board $47.50 for the set of 5. > > If you mail your payment to: > > Stanley Reynolds > > 225 Alpine Street > > Birmingham, AL 35210 > > then $9 per board $45 for the set of 5. > > Yes I have plenty of extra boards. > > > > Notice arrow has a good price on the DDS chip. > > I have no plans to provide parts except if someone is unable to complete > > the > > project otherwise. > > > > Stanley > > > > ___ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Cool. Is there a parts list? I definitely want to build one. Looks like a really interesting project and a great opportunity for me to learn. I've been meaning to tinker with those AD DDS chips for a while. I have a dev kit for one of the models around here somewhere that I picked up for an ultrasound focusing project (sound radiation pressure was used to push blood cells to the center of a capillary tube) but all I really did was layout. No software for me on that one. -Bob On Tue, Sep 7, 2010 at 11:40 AM, Stanley Reynolds < stanley_reyno...@yahoo.com> wrote: > Yes this file: > > http://www.n4iqt.com/BillRiley/A-Small-DMTD-System.pdf > > Stanley > > > > - Original Message > From: Robert Darlington > To: Discussion of precise time and frequency measurement < > time-nuts@febo.com> > Sent: Tue, September 7, 2010 11:54:56 AM > Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards > are > here ! > > Hi Stanley, > > I'm very interested in building this project. Do you have documentation > online? I'd like to read through it then send you the $47 for the boards. > > Thanks, > Bob > > On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds < > stanley_reyno...@yahoo.com > > wrote: > > > Packing them up to take to the PO. > > Paypal to stanley_reyno...@yahoo.com > > $9.50 per board $47.50 for the set of 5. > > If you mail your payment to: > > Stanley Reynolds > > 225 Alpine Street > > Birmingham, AL 35210 > > then $9 per board $45 for the set of 5. > > Yes I have plenty of extra boards. > > > > Notice arrow has a good price on the DDS chip. > > I have no plans to provide parts except if someone is unable to complete > > the > > project otherwise. > > > > Stanley > > > > ___ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Yes this file: http://www.n4iqt.com/BillRiley/A-Small-DMTD-System.pdf Stanley - Original Message From: Robert Darlington To: Discussion of precise time and frequency measurement Sent: Tue, September 7, 2010 11:54:56 AM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here ! Hi Stanley, I'm very interested in building this project. Do you have documentation online? I'd like to read through it then send you the $47 for the boards. Thanks, Bob On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds wrote: > Packing them up to take to the PO. > Paypal to stanley_reyno...@yahoo.com > $9.50 per board $47.50 for the set of 5. > If you mail your payment to: > Stanley Reynolds > 225 Alpine Street > Birmingham, AL 35210 > then $9 per board $45 for the set of 5. > Yes I have plenty of extra boards. > > Notice arrow has a good price on the DDS chip. > I have no plans to provide parts except if someone is unable to complete > the > project otherwise. > > Stanley > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Hi Stanley, I'm very interested in building this project. Do you have documentation online? I'd like to read through it then send you the $47 for the boards. Thanks, Bob On Sat, Sep 4, 2010 at 1:28 PM, Stanley Reynolds wrote: > Packing them up to take to the PO. > Paypal to stanley_reyno...@yahoo.com > $9.50 per board $47.50 for the set of 5. > If you mail your payment to: > Stanley Reynolds > 225 Alpine Street > Birmingham, AL 35210 > then $9 per board $45 for the set of 5. > Yes I have plenty of extra boards. > > Notice arrow has a good price on the DDS chip. > I have no plans to provide parts except if someone is unable to complete > the > project otherwise. > > Stanley > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Brice I don't receive all the messages from the list but check the archives. I have the boards and extras so busy packing / shipping. Just checked paypal and did not see your payment. If you have sent it do not worry I will figure it out. I use a spread sheet to match up names, nick names, paypal ids, and email address. Stanley - Original Message From: Heathkid To: Discussion of precise time and frequency measurement Sent: Mon, September 6, 2010 11:14:18 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here ! Stanley, Did I already send you payment for the "expanded" version? I'm still not getting any emails from you except from the list. What's the status of the "Small DMTD Project"? There hasn't been a word about it for a *long* time. 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: Sent: Saturday, September 04, 2010 3:28 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Update,boards are here ! > Packing them up to take to the PO. > Paypal to stanley_reyno...@yahoo.com > $9.50 per board $47.50 for the set of 5. > If you mail your payment to: > Stanley Reynolds > 225 Alpine Street > Birmingham, AL 35210 > then $9 per board $45 for the set of 5. > Yes I have plenty of extra boards. > > Notice arrow has a good price on the DDS chip. > I have no plans to provide parts except if someone is unable to complete the > project otherwise. > > Stanley > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Stanley, Did I already send you payment for the "expanded" version? I'm still not getting any emails from you except from the list. What's the status of the "Small DMTD Project"? There hasn't been a word about it for a *long* time. 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: Sent: Saturday, September 04, 2010 3:28 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Update,boards are here ! Packing them up to take to the PO. Paypal to stanley_reyno...@yahoo.com $9.50 per board $47.50 for the set of 5. If you mail your payment to: Stanley Reynolds 225 Alpine Street Birmingham, AL 35210 then $9 per board $45 for the set of 5. Yes I have plenty of extra boards. Notice arrow has a good price on the DDS chip. I have no plans to provide parts except if someone is unable to complete the project otherwise. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] Small DMTD project PCBs Group Buy Update, boards are here !
Packing them up to take to the PO. Paypal to stanley_reyno...@yahoo.com $9.50 per board $47.50 for the set of 5. If you mail your payment to: Stanley Reynolds 225 Alpine Street Birmingham, AL 35210 then $9 per board $45 for the set of 5. Yes I have plenty of extra boards. Notice arrow has a good price on the DDS chip. I have no plans to provide parts except if someone is unable to complete the project otherwise. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
In a message dated 02/09/2010 01:58:00 GMT Daylight Time, stanley_reyno...@yahoo.com writes: Boards will be here Friday September 3. --- Hi Stanley Many thanks for the update, I'd like 4 Mixer PCBs please and 2 DDS PCBs and have just made payment for these via Paypal. regards Nigel GM8PZR ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] Small DMTD project PCBs Group Buy Update
Boards will be here Friday September 3. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
I'd like to put my order in for 3 PICTIC boards, 2 Mixer boards and 2 DDS boards. thanks, Eric On Wed, Aug 18, 2010 at 9:27 PM, Stanley Reynolds wrote: > Just boards, 5 times 9.00 = $45 mailed payment $47.5 Paypal > two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd > pictic as an option. > > If you had another offset source no need for the DDS board. If you have Time > interval counters that are interfaced to a computer then no need for the > PicTic > boards. Guess you could use the DDS board for other projects also. > > Each mixer board has two identical channels so it would be possible to use > just > one in some applications. > > I 'm offering the boards in any combination. > > Stanley > > > > > > From: Eric Garner > To: Discussion of precise time and frequency measurement > Sent: Wed, August 18, 2010 10:58:36 PM > Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update > > Just to be clear, the ~48 dollar total includes all of the required boards( > minus components) needed to make the dmtd setup work? > > Thanks, > Eric > > Sent from my Banana Jr. mobile device > > On Aug 18, 2010, at 1:50 PM, Stanley Reynolds > wrote: > >> Will place order in the next few days please email me with any suggested >>changes >> to the mixer or DDS boards. >> >> Stanley >> >> >> >> >> From: Stanley Reynolds >> To: time-nuts@febo.com >> Sent: Sun, August 15, 2010 3:14:50 PM >> Subject: [time-nuts] Small DMTD project PCBs Group Buy >> >> Any interest in boards at 8 USD each as before ? >> >> The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS >>board. >> >> >> >> 5 boards plus shipping about 47.50 usd >> >> Please email me off list with your interest. >> >> I not sure if using the pictic II vs I board will present problems for the >> software. >> >> Would also like to workout any changes to the DDS or Mixer Boards before I >>place >> >> the order. >> >> Yes I still have PICTIC II boards from the first order and other parts for >>them. >> >> Stanley >> ___ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> ___ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- --Eric _ Eric Garner ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
I 'm offering the boards in any combination. Ah, that's good to know. In that case I'd like to order one DDS board and two mixer boards; will supply my own TIC. My address is below. Thanks for making this possible, Jan-Derk Bakker Uilenstede 12 1183AH Amstelveen The Netherlands, Europe Phone: +31 20 6434867 PayPal: j...@lartmaker.nl ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Brice, You are on the list. Will let everyone know when payment is needed, if you are using paypal no need to send payment till I can ship the boards, if by mail then should arrive after September 3. Stanley From: Heathkid To: Discussion of precise time and frequency measurement Sent: Wed, August 18, 2010 11:42:43 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update Stanley, Are you ready to accept payments for these now or are you still working out the details? I would want the 3rd PICTIC II option for the expanded DMTD. 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: "Discussion of precise time and frequency measurement" Sent: Thursday, August 19, 2010 12:27 AM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update Just boards, 5 times 9.00 = $45 mailed payment $47.5 Paypal two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd pictic as an option. If you had another offset source no need for the DDS board. If you have Time interval counters that are interfaced to a computer then no need for the PicTic boards. Guess you could use the DDS board for other projects also. Each mixer board has two identical channels so it would be possible to use just one in some applications. I 'm offering the boards in any combination. Stanley From: Eric Garner To: Discussion of precise time and frequency measurement Sent: Wed, August 18, 2010 10:58:36 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update Just to be clear, the ~48 dollar total includes all of the required boards( minus components) needed to make the dmtd setup work? Thanks, Eric Sent from my Banana Jr. mobile device On Aug 18, 2010, at 1:50 PM, Stanley Reynolds wrote: > Will place order in the next few days please email me with any suggested >changes > to the mixer or DDS boards. > > Stanley > > > > > From: Stanley Reynolds > To: time-nuts@febo.com > Sent: Sun, August 15, 2010 3:14:50 PM > Subject: [time-nuts] Small DMTD project PCBs Group Buy > > Any interest in boards at 8 USD each as before ? > > The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS >board. > > > > 5 boards plus shipping about 47.50 usd > > Please email me off list with your interest. > > I not sure if using the pictic II vs I board will present problems for the > software. > > Would also like to workout any changes to the DDS or Mixer Boards before I >place > > the order. > > Yes I still have PICTIC II boards from the first order and other parts for >them. > > Stanley > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Re PIC programming -- if the volume is sufficient, Digi-Key will program PICs. The set-up fee is enough that you probably want to do at least 50-100 units to amortize the cost, but it's not too bad. That's how we handled the PIC for the TADD-2. John Heathkid wrote: Stanley, I'm not getting *any* emails from you privately. So, can you please confirm I'm on the list for a set of boards for this project (expanded system)? Also, is anyone stepping up for the PIC programming? Also, for some of the more expensive or harder to get components... would anyone be willing to do a group purchase? Thanks! 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: "Discussion of precise time and frequency measurement" Sent: Wednesday, August 18, 2010 4:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Update Will place order in the next few days please email me with any suggested changes to the mixer or DDS boards. Stanley From: Stanley Reynolds To: time-nuts@febo.com Sent: Sun, August 15, 2010 3:14:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Any interest in boards at 8 USD each as before ? The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS board. 5 boards plus shipping about 47.50 usd Please email me off list with your interest. I not sure if using the pictic II vs I board will present problems for the software. Would also like to workout any changes to the DDS or Mixer Boards before I place the order. Yes I still have PICTIC II boards from the first order and other parts for them. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Stanley, Are you ready to accept payments for these now or are you still working out the details? I would want the 3rd PICTIC II option for the expanded DMTD. 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: "Discussion of precise time and frequency measurement" Sent: Thursday, August 19, 2010 12:27 AM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update Just boards, 5 times 9.00 = $45 mailed payment $47.5 Paypal two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd pictic as an option. If you had another offset source no need for the DDS board. If you have Time interval counters that are interfaced to a computer then no need for the PicTic boards. Guess you could use the DDS board for other projects also. Each mixer board has two identical channels so it would be possible to use just one in some applications. I 'm offering the boards in any combination. Stanley From: Eric Garner To: Discussion of precise time and frequency measurement Sent: Wed, August 18, 2010 10:58:36 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update Just to be clear, the ~48 dollar total includes all of the required boards( minus components) needed to make the dmtd setup work? Thanks, Eric Sent from my Banana Jr. mobile device On Aug 18, 2010, at 1:50 PM, Stanley Reynolds wrote: Will place order in the next few days please email me with any suggested changes to the mixer or DDS boards. Stanley From: Stanley Reynolds To: time-nuts@febo.com Sent: Sun, August 15, 2010 3:14:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Any interest in boards at 8 USD each as before ? The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS board. 5 boards plus shipping about 47.50 usd Please email me off list with your interest. I not sure if using the pictic II vs I board will present problems for the software. Would also like to workout any changes to the DDS or Mixer Boards before I place the order. Yes I still have PICTIC II boards from the first order and other parts for them. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Just boards, 5 times 9.00 = $45 mailed payment $47.5 Paypal two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd pictic as an option. If you had another offset source no need for the DDS board. If you have Time interval counters that are interfaced to a computer then no need for the PicTic boards. Guess you could use the DDS board for other projects also. Each mixer board has two identical channels so it would be possible to use just one in some applications. I 'm offering the boards in any combination. Stanley From: Eric Garner To: Discussion of precise time and frequency measurement Sent: Wed, August 18, 2010 10:58:36 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update Just to be clear, the ~48 dollar total includes all of the required boards( minus components) needed to make the dmtd setup work? Thanks, Eric Sent from my Banana Jr. mobile device On Aug 18, 2010, at 1:50 PM, Stanley Reynolds wrote: > Will place order in the next few days please email me with any suggested >changes > to the mixer or DDS boards. > > Stanley > > > > > From: Stanley Reynolds > To: time-nuts@febo.com > Sent: Sun, August 15, 2010 3:14:50 PM > Subject: [time-nuts] Small DMTD project PCBs Group Buy > > Any interest in boards at 8 USD each as before ? > > The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS >board. > > > > 5 boards plus shipping about 47.50 usd > > Please email me off list with your interest. > > I not sure if using the pictic II vs I board will present problems for the > software. > > Would also like to workout any changes to the DDS or Mixer Boards before I >place > > the order. > > Yes I still have PICTIC II boards from the first order and other parts for >them. > > Stanley > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > ___ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Just to be clear, the ~48 dollar total includes all of the required boards( minus components) needed to make the dmtd setup work? Thanks, Eric Sent from my Banana Jr. mobile device On Aug 18, 2010, at 1:50 PM, Stanley Reynolds > wrote: Will place order in the next few days please email me with any suggested changes to the mixer or DDS boards. Stanley From: Stanley Reynolds To: time-nuts@febo.com Sent: Sun, August 15, 2010 3:14:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Any interest in boards at 8 USD each as before ? The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS board. 5 boards plus shipping about 47.50 usd Please email me off list with your interest. I not sure if using the pictic II vs I board will present problems for the software. Would also like to workout any changes to the DDS or Mixer Boards before I place the order. Yes I still have PICTIC II boards from the first order and other parts for them. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Yes you are on the list. Stanley From: Heathkid To: Discussion of precise time and frequency measurement Sent: Wed, August 18, 2010 8:41:45 PM Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update Stanley, I'm not getting *any* emails from you privately. So, can you please confirm I'm on the list for a set of boards for this project (expanded system)? Also, is anyone stepping up for the PIC programming? Also, for some of the more expensive or harder to get components... would anyone be willing to do a group purchase? Thanks! 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: "Discussion of precise time and frequency measurement" Sent: Wednesday, August 18, 2010 4:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Update Will place order in the next few days please email me with any suggested changes to the mixer or DDS boards. Stanley From: Stanley Reynolds To: time-nuts@febo.com Sent: Sun, August 15, 2010 3:14:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Any interest in boards at 8 USD each as before ? The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS board. 5 boards plus shipping about 47.50 usd Please email me off list with your interest. I not sure if using the pictic II vs I board will present problems for the software. Would also like to workout any changes to the DDS or Mixer Boards before I place the order. Yes I still have PICTIC II boards from the first order and other parts for them. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Stanley, I'm not getting *any* emails from you privately. So, can you please confirm I'm on the list for a set of boards for this project (expanded system)? Also, is anyone stepping up for the PIC programming? Also, for some of the more expensive or harder to get components... would anyone be willing to do a group purchase? Thanks! 73 Brice KA8MAV - Original Message - From: "Stanley Reynolds" To: "Discussion of precise time and frequency measurement" Sent: Wednesday, August 18, 2010 4:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Update Will place order in the next few days please email me with any suggested changes to the mixer or DDS boards. Stanley From: Stanley Reynolds To: time-nuts@febo.com Sent: Sun, August 15, 2010 3:14:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Any interest in boards at 8 USD each as before ? The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS board. 5 boards plus shipping about 47.50 usd Please email me off list with your interest. I not sure if using the pictic II vs I board will present problems for the software. Would also like to workout any changes to the DDS or Mixer Boards before I place the order. Yes I still have PICTIC II boards from the first order and other parts for them. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] Small DMTD project PCBs Group Buy Update
Will place order in the next few days please email me with any suggested changes to the mixer or DDS boards. Stanley From: Stanley Reynolds To: time-nuts@febo.com Sent: Sun, August 15, 2010 3:14:50 PM Subject: [time-nuts] Small DMTD project PCBs Group Buy Any interest in boards at 8 USD each as before ? The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS board. 5 boards plus shipping about 47.50 usd Please email me off list with your interest. I not sure if using the pictic II vs I board will present problems for the software. Would also like to workout any changes to the DDS or Mixer Boards before I place the order. Yes I still have PICTIC II boards from the first order and other parts for them. Stanley ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.