I'd like to put my order in for 3 PICTIC boards, 2 Mixer boards and 2 DDS boards.
thanks, Eric On Wed, Aug 18, 2010 at 9:27 PM, Stanley Reynolds <[email protected]> wrote: > Just boards, 5 times 9.00 = $45 mailed payment $47.5 Paypal > two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd > pictic as an option. > > If you had another offset source no need for the DDS board. If you have Time > interval counters that are interfaced to a computer then no need for the > PicTic > boards. Guess you could use the DDS board for other projects also. > > Each mixer board has two identical channels so it would be possible to use > just > one in some applications. > > I 'm offering the boards in any combination. > > Stanley > > > > > ________________________________ > From: Eric Garner <[email protected]> > To: Discussion of precise time and frequency measurement <[email protected]> > Sent: Wed, August 18, 2010 10:58:36 PM > Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update > > Just to be clear, the ~48 dollar total includes all of the required boards( > minus components) needed to make the dmtd setup work? > > Thanks, > Eric > > Sent from my Banana Jr. mobile device > > On Aug 18, 2010, at 1:50 PM, Stanley Reynolds <[email protected]> > wrote: > >> Will place order in the next few days please email me with any suggested >>changes >> to the mixer or DDS boards. >> >> Stanley >> >> >> >> ________________________________ >> From: Stanley Reynolds <[email protected]> >> To: [email protected] >> Sent: Sun, August 15, 2010 3:14:50 PM >> Subject: [time-nuts] Small DMTD project PCBs Group Buy >> >> Any interest in boards at 8 USD each as before ? >> >> The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS >>board. >> >> >> >> 5 boards plus shipping about 47.50 usd >> >> Please email me off list with your interest. >> >> I not sure if using the pictic II vs I board will present problems for the >> software. >> >> Would also like to workout any changes to the DDS or Mixer Boards before I >>place >> >> the order. >> >> Yes I still have PICTIC II boards from the first order and other parts for >>them. >> >> Stanley >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- --Eric _________________________________________ Eric Garner _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
