Stanley,
Are you ready to accept payments for these now or are you still working out
the details? I would want the 3rd PICTIC II option for the expanded DMTD.
73 Brice KA8MAV
----- Original Message -----
From: "Stanley Reynolds" <stanley_reyno...@yahoo.com>
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Sent: Thursday, August 19, 2010 12:27 AM
Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Just boards, 5 times 9.00 = $45 mailed payment $47.5 Paypal
two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd
pictic as an option.
If you had another offset source no need for the DDS board. If you have Time
interval counters that are interfaced to a computer then no need for the
PicTic
boards. Guess you could use the DDS board for other projects also.
Each mixer board has two identical channels so it would be possible to use
just
one in some applications.
I 'm offering the boards in any combination.
Stanley
________________________________
From: Eric Garner <garn...@gmail.com>
To: Discussion of precise time and frequency measurement
<time-nuts@febo.com>
Sent: Wed, August 18, 2010 10:58:36 PM
Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update
Just to be clear, the ~48 dollar total includes all of the required boards(
minus components) needed to make the dmtd setup work?
Thanks,
Eric
Sent from my Banana Jr. mobile device
On Aug 18, 2010, at 1:50 PM, Stanley Reynolds <stanley_reyno...@yahoo.com>
wrote:
Will place order in the next few days please email me with any suggested
changes
to the mixer or DDS boards.
Stanley
________________________________
From: Stanley Reynolds <stanley_reyno...@yahoo.com>
To: time-nuts@febo.com
Sent: Sun, August 15, 2010 3:14:50 PM
Subject: [time-nuts] Small DMTD project PCBs Group Buy
Any interest in boards at 8 USD each as before ?
The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS
board.
5 boards plus shipping about 47.50 usd
Please email me off list with your interest.
I not sure if using the pictic II vs I board will present problems for the
software.
Would also like to workout any changes to the DDS or Mixer Boards before I
place
the order.
Yes I still have PICTIC II boards from the first order and other parts for
them.
Stanley
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
