Re: configuring an ODBC database with JNDI
hi to the list. Well, I was thinking that I was not needing a driver because I have j2sdk 1.4 and when I use in servlets jdbc:odbc:odbcsorce and the sun.jdbc.odbc.JdbcOdbcDriver, everything goes fine... Can I still use the sun's jdbcodbcdriver? thanks in advance, inacioW- --- Kwok Peng Tuck [EMAIL PROTECTED] schrieb: It's up to the database vendor to provide a JDBC driver, not tomcat. You will have to figure out if inicio has a JDBC driver, and what kind of JDBC support provided by that driver, whether it is Type 1, 2, 3 or 4. dein_metzger wrote: hi. I was thinking that tomcat comes with a native jdbc driver... where I can get one for winxp? how can I get certified if there is one compatible driver? thanks in advance, inaciow -Original Message- From: Sudhir Movva [mailto:[EMAIL PROTECTED] Sent: quinta-feira, 24 de julho de 2003 22:03 To: 'Tomcat Users List' Subject: RE: configuring an ODBC database with JNDI First of all you need a jdbc driver to connect to your database (inicio) using Java. If there is one... Check this out http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples -how to.html -Original Message- From: dein_metzger [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 8:44 PM To: [EMAIL PROTECTED] Subject: configuring an ODBC database with JNDI I am new to the list. and to JSP and JavaBeans I would like to know how i configure an ODBC database called inicio to work with JNDI, and how I use it in my JSP / Javabean. (I am using tomcat 4.1 on windows xp) --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.502 / Virus Database: 300 - Release Date: 18/7/2003 - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.502 / Virus Database: 300 - Release Date: 18/7/2003 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.502 / Virus Database: 300 - Release Date: 18/7/2003 - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] __ Gesendet von Yahoo! Mail - http://mail.yahoo.de Logos und Klingeltöne fürs Handy bei http://sms.yahoo.de - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Help required
Hi all, We have a website hosted on tomcat4.1.12 .We are facing the following problem when the site is up for a long time and the pages does not load end up with a blank page , but the log file has the entry as stack trace given below What could be the reason for this and what could be the possible solution to rectify this problem? Thanks in advance regds, Veena 2003-07-25 13:31:38 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception org.apache.jasper.JasperException at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:2 48) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application FilterChain.java:247) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh ain.java:193) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja va:260) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.ja va:191) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2396) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180 ) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve. java:170) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:641) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172 ) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:641) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java :174) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223) at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:256) at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:361) at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:563) at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:535) at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:638) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.jav a:533) at java.lang.Thread.run(Thread.java:479) - Root Cause - javax.servlet.ServletException at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImp l.java:497) at org.apache.jsp.price_jsp._jspService(price_jsp.java:414) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:136) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:2 04) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application FilterChain.java:247) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh ain.java:193) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja va:260) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at
RE: Help required
There is an exception thrown in price_jsp.java:414 I assume this is something that has been developed for the project. -Original Message- From: Veena K.S [mailto:[EMAIL PROTECTED] Sent: Friday, 25 July 2003 4:37 PM To: '[EMAIL PROTECTED]' Subject: Help required Hi all, We have a website hosted on tomcat4.1.12 .We are facing the following problem when the site is up for a long time and the pages does not load end up with a blank page , but the log file has the entry as stack trace given below What could be the reason for this and what could be the possible solution to rectify this problem? Thanks in advance regds, Veena 2003-07-25 13:31:38 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception org.apache.jasper.JasperException at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:2 48) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application FilterChain.java:247) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh ain.java:193) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja va:260) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.ja va:191) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2396) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180 ) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve. java:170) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:641) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172 ) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:641) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java :174) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223) at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:256) at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:361) at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:563) at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:535) at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:638) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.jav a:533) at java.lang.Thread.run(Thread.java:479) - Root Cause - javax.servlet.ServletException at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImp l.java:497) at org.apache.jsp.price_jsp._jspService(price_jsp.java:414) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:136) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:2 04) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application FilterChain.java:247) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh ain.java:193) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja
Re: where is sign.sh from mod_ssl ???
It seems that it is only distributed with the Apache-1.3.x version of mod_ssl. In my experience, it is usually worth the trouble in the long run to do a full setup for a CA (i.e. what 'openssl ca ...' expects) if you need to issue your own certs. [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hi. The HOWTO instructions on http://httpd.apache.org/docs-2.0/ssl/ssl_fag.html said I need a sign.sh script for signing server.csr. It is supposed to be distributed with mod_ssl. Mabe I should download and unpack the latest mod_ssl and look for it again... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Query about FileUploading??
Hi all friends,
Iam developing one uploading application for client
side Iam using html and for server side(Tomcat4.1.24)
Iam using servlet but my problem is I have to upload
big file say upto 50mb now i want to send file to
server in block wise(2048kb) for that i want to read
file in block of 2048 kb and want to write on
outputstream and so that my servlet can read from
outputStream and can write on destination folder.Can I
give Resume and Suspend facility in html which I have
given in swing client interface. I have already
developed this application using swing and servlet.Can
you plz guide me how I can do this in html.Eagerly
waiting for someone reply.Below r my codes for html.
script
function sendFile()
{
var sFileName =
document.getElementById(txtFile).value;
var sSafeFileName = encodeURIComponent(sFileName);
var
path=http://127.0.0.1:8080/examples/servlets/NetRecvServlet;;
document.forms[0].action=path+?+name= +
sSafeFileName;
document.forms[0].submit();
}
/script
body
form name=form1 method=POST
enctype=multipart/form-data
pSelect file to send:input name=Button
type=file class=file1 id=txtFile size=30/p
pinput name=sendfilebtn type=button class=btn
id=sendfilebtn value=Send File
onClick=sendFile()/p
/form
/body
Regards
Bikash
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Re: HttpRequest and HttpResponse from pageContext?
Thanks! Gil On Fri, 2003-07-25 at 01:23, Bill Barker wrote: HttpServletRequest req = (HttpServletRequest)pageContext.getRequest(); HttpServletResponse res = (HttpServletResponse)pageContext.getResponse(); Gil Hauer [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hello, Given a PageContext object, is there any way to get back to the HttpRequest that generated the page? Is there any way to get to the HttpResponse? Thanks, Gil - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: where is sign.sh from mod_ssl ???
Hi! I am going throug a couple of books (O'Reilly OpenSSL and SAM Maxum Apache Security) and HOWTOs, I haven't come across instructions to set up a CA yet. Can you please oint me in the right direction ? TIA :( Bill Barker wrote: It seems that it is only distributed with the Apache-1.3.x version of mod_ssl. In my experience, it is usually worth the trouble in the long run to do a full setup for a CA (i.e. what 'openssl ca ...' expects) if you need to issue your own certs. [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hi. The HOWTO instructions on http://httpd.apache.org/docs-2.0/ssl/ssl_fag.html said I need a sign.sh script for signing server.csr. It is supposed to be distributed with mod_ssl. Mabe I should download and unpack the latest mod_ssl and look for it again... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [FileUpload]
To the best of my knowlege, there is no way to preload the value of a file input field or to programmatically load it. I've tried with Mozilla and it throws a javascript security exception. (I haven't tried with MSIE). To do so would be a security threat. Any webpage could have a hidden form that looks for a particular file (or set of files) and submits itself as soon as the page loads. The user would have no way of stopping it or even knowing that it's going ont. On Thursday 24 July 2003 05:51 pm, you wrote: Can anyone tells me how to modify my form to ensure that the contents of an input type=file control are still present when I return to the form? My file upload servlet is working pretty well now except for one thing. I am doing edits on each of the files which are to be uploaded, including a check to see if the file is larger than an individual size threshold I have set. (This is something I've created myself because I want an individual size limit, not the aggregate limit provided by the Commons FileUpload team.) When an individual file size is too large, I create a message and display it, then invite my user to press the back button on their browser to go back to the form to modify the form - either replace the name of the overly large file with a smaller one or blank it out altogether. Everything works fine except that when the user gets back to the form, all of the fields that are input type=file are blank. The input type=text fields retain their original values. I would like the input type=file controls to also contain their original value. What do I need to do to make that happen? I've never seen this blanking behaviour in other forms but this is the first time I've written a servlet containing an input type=file control I am running Tomcat 4.1.24. My browser is IE 6.0.2800.xpsp2.030422-1633. My OS is Windows XP Pro with all critical service applied. Rhino --- rhino1 AT sympatico DOT ca If you want the best seat in the house, you'll have to move the cat. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
performance of serving static data? apache or tomcat
I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Unfortunately, this is an SSL protected site and none of the pages are cached. So my question is, what is the best approach with performance in mind? What is the fasted way to get the image and dynamic HTML back to the browser ? Thank you for your help in advance. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Classloaders (newbie)
Hi! I'm trying to call an EJB from within a webserivce (Tomcat-Axis). The basic design is as follows Client WebService EJBClientClass EJB Everytime i run this, i get a remoteinovationerror (i resume from the EJBCLientClass) But when i integrate the webservice and the EJBClientClass everythign run fine (Client Webservice with EJB client coded inside EJB) Could this be a classloader issue? please please please help Harsh - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
how to get the ca from client by servlet
I had finished the configuration of apache + tomcat + ssl.but i found i can't get client's ca in this environment by servlet. I successfully get client's ca in the tomcat + ssl,by code 'request.getHeader()'.but in apache i can't get it. I don't know what is error in the apache + ssl + tomcat. How to get the clients ca in the apache + ssl + tomcat? thanks errise
Re: how to get the ca from client by servlet
Hi. We are in the same boat ! See Zhangwei's email. It seems to be a bug, to be fixed by the next release , coming out this month. errise wrote: I had finished the configuration of apache + tomcat + ssl.but i found i can't get client's ca in this environment by servlet. I successfully get client's ca in the tomcat + ssl,by code 'request.getHeader()'.but in apache i can't get it. I don't know what is error in the apache + ssl + tomcat. How to get the clients ca in the apache + ssl + tomcat? thanks errise - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: War files don't work
Tang, Thanks for the reply. Unfortunantly, that isn't the behavior I am seeing, and I think the other poster had the same issue. If I don't have a context for my war file in the server.xml, then it unpacks fine. But, if I do have a context, then it won't unpack, and I have to do it manually. This is the server conf that I am trying to use that doesn't work: Context className=org.apache.catalina.core.StandardContext cachingAllowed=true charsetMapperClass=org.apache.catalina.util.CharsetMapper cookies=true crossContext=false debug=0 docBase=fortius.war mapperClass=org.apache.catalina.core.StandardContextMapper path=/fortius privileged=false reloadable=true swallowOutput=false useNaming=true wrapperClass=org.apache.catalina.core.StandardWrapper Environment description= name=local_dir override=true type=java.lang.String value=d:/java/tomcat/webapps/fortius/data/scintfiles/ /Context I do have the docBase pointing to my war file. Eric Pugh -Original Message- From: Tang To: Tomcat Users List; [EMAIL PROTECTED] Sent: 7/24/03 9:31 PM Subject: Re: War files don't work Hi, all you need to do is place WAR file into webapps directory, Tomcat will unpack for you. If you don't pack web application into WAR file. You should copy web application directory into webapps directory and config context parameter. You can check tomcat-docs for more configuration details. - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Thursday, July 24, 2003 6:18 PM Subject: RE: War files don't work I'm joining this thread late, but I posted a couple weeks ago the same problem.. I am running JDK1.4.2 and Tomcat 4.1.24. If I have a context specified in server.xml, then the war file DOESN'T unpack. If I don't have a context specified, then it DOES unpack. Setting the docBase to fortius.war versus fortius doesn't seem to matter at all. I am building my war file using Maven.. could that be the problem? Eric Pugh -Original Message- From: Rick Roberts To: Tomcat Users List Sent: 7/23/03 3:26 PM Subject: Re: War files don't work Making docBase = nsfs.war vice nsfs works!! :) However; the war file is not being unpacked. It seems that unpackWARs=true works the same as unpackWARs=false Thanks, Rick John Turner wrote: From the docs for Context: The Document Base (also known as the Context Root) directory for this web application, or the pathname to the web application archive file (if this web application is being executed directly from the WAR file). You may specify an absolute pathname for this directory or WAR file, or a pathname that is relative to the appBase directory of the owning Host. Thus, if you're going to put a Context entry in server.xml for nsfs, make the docBase nsfs.war, not nsfs. Further: http://jakarta.apache.org/tomcat/tomcat-4.1-doc/config/host.html#Automat ic%20Application%20Deployment John Rick Roberts wrote: Does the nsfs.war file go into webapps directory or into webapps/nsfs directory? Currently, the webapps/nsfs dir does not exist. There is only the nsfs.war file setting in the webapps directory. I am assuming that Tomcat will create the webapps/nsfs directory for me when it expands the war file. I have temporarily set permissions to 777 on the webapps directory and it still does not expand, nor try to use, the war file. Rick John Turner wrote: You've told Tomcat the docBase is nsfs. Tomcat thusly looks for a directory called nsfs in the Host's appBase. If it finds it, and unpackWars is true, it will unpack your WAR file into that directory (webapps/nsfs, NOT webapps). Thus, Tomcat needs r+w on webapps/nsfs. Does Tomcat have r+w on webapps/nsfs? Alternatively, make unpackWars false. John Rick Roberts wrote: My directory permissions are as follows: drwxrwx---7 root tomcat4 4096 Jul 23 12:17 webapps ps -ef shows me this, which is think is Tomcat, which is run by user tomcat4: tomcat4 6199 1 0 12:17 pts/200:00:36 /usr/java/jdk1.4/bin/java -Djava.endorsed.dirs= -classpath /usr/java/jdk1.4/lib/tools.jar:/var Thanks, Rick Shapira, Yoav wrote: Howdy, 2003-07-23 11:09:30 StandardContext[/nsfs]: Resources start failed: java.lang.IllegalArgumentException: Document base /var/tomcat4/webapps/nsfs does not exist or is not a readable directory Well explain it to me! :) There is a /var/tomcat4/webapps/nsfs.war file. There should not be a /var/tomcat4/webapps/nsfs directory. If you have unpackWARS=true tomcat will try to explode your war into the directory specified as the docBase, which is nsfs under webapps. If it can't create this directory or read/write into it, you get the above error. Check file permissions on webapps. Yoav Shapira --
RE: how-to specify Java runtime options -Xmx128m, w/ Tomcat 4 as Win2k service
Would this tool help? I also saw a wiki page for tomcat on setting memory in the registry.. http://web.bvu.edu/staff/david/tcservcfg/ I guess my question is what it sthe right way to set options like this when running as an Win2k service? Eric Pugh -Original Message- From: Simon Pabst To: Tomcat Users List Sent: 7/24/03 4:59 PM Subject: Re: how-to specify Java runtime options -Xmx128m, w/ Tomcat 4 as Win2k service The 128m won't get used/allocated on Tomcat/Java start already (AFAIK), only when you do a lot of memory intensive things (you could use a webserver stress tool to increase the load on the server so memory grows) At 13:52 24.07.2003 -0400, you wrote: after assigning the following environment variables the java runtime options as follows: eg: JAVA_OPTS=-Xmx128m -Xms128m tried with: CATALINA_OPTS JAVA_OPTS amount of RAM memory used stayed aprox the same. Though i was expecting more memory to be used because of the extra memory that should have been allotted to java instance for Tomcat. Consequently, i am assuming that options were not applied by simply setting these environment variables, at least when Tomcat is started as a service. Where and how are java runtime options to be specified with Tomcat 4.1 (JDK 1.4.2) when it is started as a win2k service? [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: where is sign.sh from mod_ssl ???
A good HOWTO about Certificate Management and creating your own CA is on http://www.tldp.org/HOWTO/SSL-Certificates-HOWTO/c118.html Another one is here: http://www.corserv.com/freebsd/apache-ssl-howto.html (not so detailed, but not that good either) At 15:28 25.07.2003 +1000, you wrote: Hi! I am going throug a couple of books (O'Reilly OpenSSL and SAM Maxum Apache Security) and HOWTOs, I haven't come across instructions to set up a CA yet. Can you please oint me in the right direction ? TIA :( Bill Barker wrote: It seems that it is only distributed with the Apache-1.3.x version of mod_ssl. In my experience, it is usually worth the trouble in the long run to do a full setup for a CA (i.e. what 'openssl ca ...' expects) if you need to issue your own certs. [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hi. The HOWTO instructions on http://httpd.apache.org/docs-2.0/ssl/ssl_fag.html said I need a sign.sh script for signing server.csr. It is supposed to be distributed with mod_ssl. Mabe I should download and unpack the latest mod_ssl and look for it again... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Easy question on Tomcat 4.0 and SSL+HTTPS via localhost:8843. Lock-Icon disappear from the Browser.
I have installed the SSL support for Tomcat 4.0.4 and almost everything works. I followed all the guidelines from http://jakarta.apache.org/tomcat/tomcat-4.0-doc/ssl-howto.html http://jakarta.apache.org/tomcat/tomcat-4.0-doc/ssl-howto.html But for instance when I type https://localhost:8443/ https://localhost:8443/ into my browser it works, my Internet Ms-Explorer 6.0 shows me the Certificate form in order to accepted it, on the right-bottom area an lock-icon appears telling me that this transaction In under Secure guide but on the next page, the lock icon disappears. Could somebody help me out? Have a nice weekend, Carles Zaragoza. -- The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.
Re: Servlets in a protected resource
Security contraints are always made on the incoming URI. Therefore, whatever you map your servlets paths to you'll need to create the appropriate constraints. -Tim Jeff Cummings wrote: Hi everyone, I have been able to setup JSPs in a protrected resource. The login page is displayed. How do I setup a servlet in a protected resource to get the same effect? Jeff - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
yes and no. The browser makes a request to apache. Then the request is proxied to tomcat. When the servlet has been served, the browser issues a keep-alive and reuses the apache socket connection to get any other assets (such as images) needed. 2 requests, one connection. With the numerous speed improvements in tomcat 4.1 and 5 - there might not be much (if any) difference in speed for a low (relative term) volume site. You'll need to load test to see how things scale. -Tim [EMAIL PROTECTED] wrote: I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Unfortunately, this is an SSL protected site and none of the pages are cached. So my question is, what is the best approach with performance in mind? What is the fasted way to get the image and dynamic HTML back to the browser ? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: where is sign.sh from mod_ssl ???
Hi. Thanks, I got EngelSchall's sign.sh. I am going through exactly those doco as we speak, I think the problem with the documentation is that they refer to dfferent versions than mine. On my default RH7.1 Linux installation, I do not have /usr/local/ssl or /etc/ssl/openssl.conf, yet it comes well equipped with /etc/httpd/conf/ssl.crt ad /etc/httpd/conf/ssl.key. On the other hand, the Apache2 httpd.conf uses an Include conf/ssl.conf which doesn't look like the instructions on the documentation. I am so confused, I need a beer. S, I won't be finishing the task this week. Simon Pabst wrote: A good HOWTO about Certificate Management and creating your own CA is on http://www.tldp.org/HOWTO/SSL-Certificates-HOWTO/c118.html Another one is here: http://www.corserv.com/freebsd/apache-ssl-howto.html (not so detailed, but not that good either) At 15:28 25.07.2003 +1000, you wrote: Hi! I am going throug a couple of books (O'Reilly OpenSSL and SAM Maxum Apache Security) and HOWTOs, I haven't come across instructions to set up a CA yet. Can you please oint me in the right direction ? TIA :( Bill Barker wrote: It seems that it is only distributed with the Apache-1.3.x version of mod_ssl. In my experience, it is usually worth the trouble in the long run to do a full setup for a CA (i.e. what 'openssl ca ...' expects) if you need to issue your own certs. [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hi. The HOWTO instructions on http://httpd.apache.org/docs-2.0/ssl/ssl_fag.html said I need a sign.sh script for signing server.csr. It is supposed to be distributed with mod_ssl. Mabe I should download and unpack the latest mod_ssl and look for it again... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Need Help For Iplanet Tomcat Configuration
Hi, I'm not sure if cross posting like that was such a good idea... But since I just had to figure this out last week I will share what I learned. I had to play with this a bit befor I was able to get it to work. I was using Solaris so I can't help you with the correct version of the redirector DLL. I hope this will help. Object name=servlet ObjectType fn=force-type type=text/plain Service fn=jk_service worker=ajp13 /Object The documentation isn't entirely correct here. Put servlet in quotes. Otherwise iPlanet doesn't see the object name and the assigment you made in the default object section won't work (you will get that error once you fix the stuff below). It also wouldn't hurt to put text/plain in quotes. workers.worker file workers.tomcat_home=C:\Tomcat workers.java_home=C:\jdk1.3 ps=\ worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 I just used to last four lines of what you have here. But that shouldn't matter. I tried this url http://localhost:81/examples/servlet/HelloWorldExample [25/Jul/2003:12:59:08] warning ( 212): for host 127.0.0.1 trying to GET /examples/servlet/HelloWorldExample, send-file reports: can't find C:/iPlanet/Servers/docs/examples/servlet/HelloWorldExample (File not found) That's exactly what it is doing. So you have to fool it. In your iPlanet docroot create the directory examples. iPlanet will see it and think it's there. Then when it tries to serve it the changes in obj.conf will kick in and send the request to tomcat. In some cases you will find that you have to touch (create 0 length files) in some cases to fool netsacpe into thinking it's there. Usually it's just index.jsp. I also connect to the Coyote/JK2 AJP1.3 connector on the tomcat side and not the older AJP 1.3 connector. -e - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: where is sign.sh from mod_ssl ???
I don't know about Redhat's openssl installation, but propably it spreads over several directories. However there should be an openssl.conf somewhere, maybe its in /etc/openssl.conf or /usr/local/openssl/openssl.conf If you can't find it, this might help: find /etc -name openssl.conf or find /usr -name openssl.conf Installing openssl from source would also help getting a clean (and more secure) openssl installation with everything in one directory. And don't mix up Apache2 ssl.conf with openssl.conf, they've got nothing to do with each other. In Apache 1 all the SSL stuff was in httpd.conf, in Apache 2 they just put that into conf/ssl.conf. At 19:22 25.07.2003 +1000, you wrote: Hi. Thanks, I got EngelSchall's sign.sh. I am going through exactly those doco as we speak, I think the problem with the documentation is that they refer to dfferent versions than mine. On my default RH7.1 Linux installation, I do not have /usr/local/ssl or /etc/ssl/openssl.conf, yet it comes well equipped with /etc/httpd/conf/ssl.crt ad /etc/httpd/conf/ssl.key. On the other hand, the Apache2 httpd.conf uses an Include conf/ssl.conf which doesn't look like the instructions on the documentation. I am so confused, I need a beer. S, I won't be finishing the task this week. Simon Pabst wrote: A good HOWTO about Certificate Management and creating your own CA is on http://www.tldp.org/HOWTO/SSL-Certificates-HOWTO/c118.html Another one is here: http://www.corserv.com/freebsd/apache-ssl-howto.html (not so detailed, but not that good either) At 15:28 25.07.2003 +1000, you wrote: Hi! I am going throug a couple of books (O'Reilly OpenSSL and SAM Maxum Apache Security) and HOWTOs, I haven't come across instructions to set up a CA yet. Can you please oint me in the right direction ? TIA :( Bill Barker wrote: It seems that it is only distributed with the Apache-1.3.x version of mod_ssl. In my experience, it is usually worth the trouble in the long run to do a full setup for a CA (i.e. what 'openssl ca ...' expects) if you need to issue your own certs. [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hi. The HOWTO instructions on http://httpd.apache.org/docs-2.0/ssl/ssl_fag.html said I need a sign.sh script for signing server.csr. It is supposed to be distributed with mod_ssl. Mabe I should download and unpack the latest mod_ssl and look for it again... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
How many concurrent user on Tomcat and Apache(New Bie)
Can any body tell me that on a Apache web Server(tomcat as worker) hosting web site. How many concurrent user possible if Server has good hardware configuration. Do we need to maintains worker.properties file for many tomcat Instances under Apache.. If any body help me or any suggesstion Thanks Sachin - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
From: markw () dolphtech ! com Subject: performance of serving static data? apache or tomcat I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Think of the simple case -- a static page with an image. The client will request the page, then issue a request for the image. If the client understands HTTP/1.1 and you have enabled KeepAlives on the server, then the client should pipeline the two requests using the same socket connection. If apache is routing the requests to tomcat, you should have no problem; the requests can still be pipelined. This is pretty easy to check with a telnet client. (Let's call your host www.example.com, with /servlets/A as a servlet, and /B.txt as a static file). $ telnet www.example.com 80 [a few lines come back] GET /servlets/A HTTP/1.1 Host: www.example.com [output from /servlets/A appears here] GET /B.txt HTTP/1.1 Host: www.example.com [content of B.txt appears here] ^] telnet quit Connection closed. Be sure to put a blank line after Host:, but no blank line before GET. Image files are messy as telnet output, but if the above works with a static text file, it should also work with a static image file. If you want to try it with https, you can use the openssl command line utility. $ openssl s_client -connect www.example.com:443 [rest is same as above] -- Steve - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Help required
If the page gives an error after Tomcat is up for a long time, may be something may be timing out, like a database connection, for example. Or the session gets invalidated. Open up price_jsp.java and have a look at line 414. Zach. Veena K.S wrote: Hi all, We have a website hosted on tomcat4.1.12 .We are facing the following problem when the site is up for a long time and the pages does not load end up with a blank page , but the log file has the entry as stack trace given below What could be the reason for this and what could be the possible solution to rectify this problem? Thanks in advance regds, Veena 2003-07-25 13:31:38 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception org.apache.jasper.JasperException at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:2 48) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application FilterChain.java:247) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh ain.java:193) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja va:260) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.ja va:191) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2396) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180 ) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve. java:170) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:641) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172 ) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:641) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java :174) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok eNext(StandardPipeline.java:643) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995) at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223) at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:256) at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:361) at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:563) at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:535) at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:638) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.jav a:533) at java.lang.Thread.run(Thread.java:479) - Root Cause - javax.servlet.ServletException at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImp l.java:497) at org.apache.jsp.price_jsp._jspService(price_jsp.java:414) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:136) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:2 04) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application FilterChain.java:247) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh ain.java:193) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja va:260) at
RE: War files don't work
What the Automatic Applcation Deployment doc says is that if you have a WAR file, it won't be expanded if you have a context element in the server.xml document. It will only be run from that war file in an unexpanded format. correct? Eric -Original Message- From: John Turner To: Tomcat Users List Sent: 7/23/03 3:18 PM Subject: Re: War files don't work Check out the rules for Auto deployment: http://jakarta.apache.org/tomcat/tomcat-4.1-doc/config/host.html#Automat ic%20Application%20Deployment John Rick Roberts wrote: This sounds reasonable to me. But, if I don't have a Context/ element in server.xml then how do I provide Context/ type information to Tomcat? !-- NSFS Context -- Context path=/nsfs docBase=nsfs debug=0 reloadable=true crossContext=true Logger className=org.apache.catalina.logger.FileLogger prefix=nsfs_log. suffix=.txt timestamp=true/ /Context BTW, manually creating the nsfs/ directory did not help. however; if i manually create the nsfs/ dir and manually unpack the .war file everything works fine. another question: did I correctly create the nsfs.war file and test it by doing the following?: 1. cd to the webapps/nsfs/ directory 2. jar -cvf nsfs.war * 3. cp nsfs.war ../. (the webapps dir) 4. rm -rf nsfs/ 5. restart tomcat 6. use browser and navigate to http://localhost/nsfs Thanks, Rick - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: where are sign.sh and openssl.conf ?
Hi. Unbelievable, I searched all the servers for openssl.conf and found nothing. Some of these are stock standard default installatio sraight from the distro CDs from RH. I am going to install OpenSSL from sratch this weekend and ditch RH's distro copy. find /usr openssl.conf -type f find /usr -name openssl.conf etc... Nope. I mean, when you configure these things, the sey parametric values have to go somewhere, right ? That does it, download, compile, install OpenSSL this weekend. Ouch! Simon Pabst wrote: I don't know about Redhat's openssl installation, but propably it spreads over several directories. However there should be an openssl.conf somewhere, maybe its in /etc/openssl.conf or /usr/local/openssl/openssl.conf If you can't find it, this might help: find /etc -name openssl.conf or find /usr -name openssl.conf Installing openssl from source would also help getting a clean (and more secure) openssl installation with everything in one directory. And don't mix up Apache2 ssl.conf with openssl.conf, they've got nothing to do with each other. In Apache 1 all the SSL stuff was in httpd.conf, in Apache 2 they just put that into conf/ssl.conf. At 19:22 25.07.2003 +1000, you wrote: Hi. Thanks, I got EngelSchall's sign.sh. I am going through exactly those doco as we speak, I think the problem with the documentation is that they refer to dfferent versions than mine. On my default RH7.1 Linux installation, I do not have /usr/local/ssl or /etc/ssl/openssl.conf, yet it comes well equipped with /etc/httpd/conf/ssl.crt ad /etc/httpd/conf/ssl.key. On the other hand, the Apache2 httpd.conf uses an Include conf/ssl.conf which doesn't look like the instructions on the documentation. I am so confused, I need a beer. S, I won't be finishing the task this week. Simon Pabst wrote: A good HOWTO about Certificate Management and creating your own CA is on http://www.tldp.org/HOWTO/SSL-Certificates-HOWTO/c118.html Another one is here: http://www.corserv.com/freebsd/apache-ssl-howto.html (not so detailed, but not that good either) At 15:28 25.07.2003 +1000, you wrote: Hi! I am going throug a couple of books (O'Reilly OpenSSL and SAM Maxum Apache Security) and HOWTOs, I haven't come across instructions to set up a CA yet. Can you please oint me in the right direction ? TIA :( Bill Barker wrote: It seems that it is only distributed with the Apache-1.3.x version of mod_ssl. In my experience, it is usually worth the trouble in the long run to do a full setup for a CA (i.e. what 'openssl ca ...' expects) if you need to issue your own certs. [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hi. The HOWTO instructions on http://httpd.apache.org/docs-2.0/ssl/ssl_fag.html said I need a sign.sh script for signing server.csr. It is supposed to be distributed with mod_ssl. Mabe I should download and unpack the latest mod_ssl and look for it again... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: mod_jk on windows
httpd.conf with the rest of them. John Ravi Pachipala wrote: Where should JkMount be defined? Should it be in Tomcat's server.xml or Apache's httpd.conf? Thanks Ravi -Original Message- From: John Turner [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 2:41 PM To: Tomcat Users List Subject: Re: mod_jk on windows If its defined in Tomcat's server.xml, it should already be in mod_jk.conf. You don't want duplicate entries for JkMount. John Ravi Pachipala wrote: I defined JKMount in httpd.conf. However, I find it to be already generated in mod_jk.conf under tomcat installation. If I submit the url http://localhost/ep/apps/xxx i am getting 500 error. If - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: War files don't work
That's how I read it. Basically, a Context in server.xml trumps automatic deployment. As I understand it, you have to pick one or the other, not both. If you must put a Context in server.xml for your web application, and you want to use a WAR file, then make the docBase of the Context the WAR file, not a directory, like this: docBase=myApp.war John [EMAIL PROTECTED] wrote: What the Automatic Applcation Deployment doc says is that if you have a WAR file, it won't be expanded if you have a context element in the server.xml document. It will only be run from that war file in an unexpanded format. correct? Eric -Original Message- From: John Turner To: Tomcat Users List Sent: 7/23/03 3:18 PM Subject: Re: War files don't work Check out the rules for Auto deployment: http://jakarta.apache.org/tomcat/tomcat-4.1-doc/config/host.html#Automat ic%20Application%20Deployment John Rick Roberts wrote: This sounds reasonable to me. But, if I don't have a Context/ element in server.xml then how do I provide Context/ type information to Tomcat? !-- NSFS Context -- Context path=/nsfs docBase=nsfs debug=0 reloadable=true crossContext=true Logger className=org.apache.catalina.logger.FileLogger prefix=nsfs_log. suffix=.txt timestamp=true/ /Context BTW, manually creating the nsfs/ directory did not help. however; if i manually create the nsfs/ dir and manually unpack the .war file everything works fine. another question: did I correctly create the nsfs.war file and test it by doing the following?: 1. cd to the webapps/nsfs/ directory 2. jar -cvf nsfs.war * 3. cp nsfs.war ../. (the webapps dir) 4. rm -rf nsfs/ 5. restart tomcat 6. use browser and navigate to http://localhost/nsfs Thanks, Rick - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: where are sign.sh and openssl.conf ?
Ah you got me confused myself there a bit, just looked it up on my SuSE 8.1, its openssl.cnf not .conf And if openssl is installed (and it must be, since Apache successfully compiled with ssl) it must be somewhere. However doing a clean install of openssl is still the best way to do it, since Redhat rpm's are propably not up to date. At 20:22 25.07.2003 +1000, you wrote: Hi. Unbelievable, I searched all the servers for openssl.conf and found nothing. Some of these are stock standard default installatio sraight from the distro CDs from RH. I am going to install OpenSSL from sratch this weekend and ditch RH's distro copy. find /usr openssl.conf -type f find /usr -name openssl.conf etc... Nope. I mean, when you configure these things, the sey parametric values have to go somewhere, right ? That does it, download, compile, install OpenSSL this weekend. Ouch! Simon Pabst wrote: I don't know about Redhat's openssl installation, but propably it spreads over several directories. However there should be an openssl.conf somewhere, maybe its in /etc/openssl.conf or /usr/local/openssl/openssl.conf If you can't find it, this might help: find /etc -name openssl.conf or find /usr -name openssl.conf Installing openssl from source would also help getting a clean (and more secure) openssl installation with everything in one directory. And don't mix up Apache2 ssl.conf with openssl.conf, they've got nothing to do with each other. In Apache 1 all the SSL stuff was in httpd.conf, in Apache 2 they just put that into conf/ssl.conf. At 19:22 25.07.2003 +1000, you wrote: Hi. Thanks, I got EngelSchall's sign.sh. I am going through exactly those doco as we speak, I think the problem with the documentation is that they refer to dfferent versions than mine. On my default RH7.1 Linux installation, I do not have /usr/local/ssl or /etc/ssl/openssl.conf, yet it comes well equipped with /etc/httpd/conf/ssl.crt ad /etc/httpd/conf/ssl.key. On the other hand, the Apache2 httpd.conf uses an Include conf/ssl.conf which doesn't look like the instructions on the documentation. I am so confused, I need a beer. S, I won't be finishing the task this week. Simon Pabst wrote: A good HOWTO about Certificate Management and creating your own CA is on http://www.tldp.org/HOWTO/SSL-Certificates-HOWTO/c118.html Another one is here: http://www.corserv.com/freebsd/apache-ssl-howto.html (not so detailed, but not that good either) At 15:28 25.07.2003 +1000, you wrote: Hi! I am going throug a couple of books (O'Reilly OpenSSL and SAM Maxum Apache Security) and HOWTOs, I haven't come across instructions to set up a CA yet. Can you please oint me in the right direction ? TIA :( Bill Barker wrote: It seems that it is only distributed with the Apache-1.3.x version of mod_ssl. In my experience, it is usually worth the trouble in the long run to do a full setup for a CA (i.e. what 'openssl ca ...' expects) if you need to issue your own certs. [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] Hi. The HOWTO instructions on http://httpd.apache.org/docs-2.0/ssl/ssl_fag.html said I need a sign.sh script for signing server.csr. It is supposed to be distributed with mod_ssl. Mabe I should download and unpack the latest mod_ssl and look for it again... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: where are sign.sh and openssl.conf ?
Reason #942 not to just take defaults when installing Red Hat Linux. You're better off deleting all of their auto crap and then installing what you need from scratch. At least then you know exactly where everything is. John [EMAIL PROTECTED] wrote: Hi. Unbelievable, I searched all the servers for openssl.conf and found nothing. Some of these are stock standard default installatio sraight from the distro CDs from RH. I am going to install OpenSSL from sratch this weekend and ditch RH's distro copy. find /usr openssl.conf -type f find /usr -name openssl.conf etc... Nope. I mean, when you configure these things, the sey parametric values have to go somewhere, right ? That does it, download, compile, install OpenSSL this weekend. Ouch! Simon Pabst wrote: I don't know about Redhat's openssl installation, but propably it spreads over several directories. However there should be an openssl.conf somewhere, maybe its in /etc/openssl.conf or /usr/local/openssl/openssl.conf If you can't find it, this might help: find /etc -name openssl.conf or find /usr -name openssl.conf Installing openssl from source would also help getting a clean (and more secure) openssl installation with everything in one directory. And don't mix up Apache2 ssl.conf with openssl.conf, they've got nothing to do with each other. In Apache 1 all the SSL stuff was in httpd.conf, in Apache 2 they just put that into conf/ssl.conf. At 19:22 25.07.2003 +1000, you wrote: Hi. Thanks, I got EngelSchall's sign.sh. I am going through exactly those doco as we speak, I think the problem with the documentation is that they refer to dfferent versions than mine. On my default RH7.1 Linux installation, I do not have /usr/local/ssl or /etc/ssl/openssl.conf, yet it comes well equipped with /etc/httpd/conf/ssl.crt ad /etc/httpd/conf/ssl.key. On the other hand, the Apache2 httpd.conf uses an Include conf/ssl.conf which doesn't look like the instructions on the documentation. I am so confused, I need a beer. S, I won't be finishing the task this week. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: How many concurrent user on Tomcat and Apache(New Bie)
You only need one workers.properties file. All it does is tell mod_jk.so where to find Tomcat. Regarding how many concurrent users that is impossible to say. It depends on what your definition of good hardware is, as well as the complexity and quality of the web applications you're hosting. It doesn't matter how much hardware you have or how many users you have, a single poorly designed web application can bring even the most robust server to a halt. John Sachin wrote: Can any body tell me that on a Apache web Server(tomcat as worker) hosting web site. How many concurrent user possible if Server has good hardware configuration. Do we need to maintains worker.properties file for many tomcat Instances under Apache.. If any body help me or any suggesstion Thanks Sachin - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
It's two requests whether you use Apache or not. John [EMAIL PROTECTED] wrote: I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Unfortunately, this is an SSL protected site and none of the pages are cached. So my question is, what is the best approach with performance in mind? What is the fasted way to get the image and dynamic HTML back to the browser ? Thank you for your help in advance. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
Not many people use IIS + Tomcat (comparatively speaking). Of those, the folks using JK2 (redirector2) is probably smaller still. Of those people, there's a good chance that they don't have an answer to your particular question. Would you rather they replied anyway and sent you off on a wild goose chase, wasting your time? John Nathan Ward wrote: I appreciate the reply. I've joined this mailing list about a week ago and posted several messages. I've not gotten many replies at all. I guess people are busy and there are a lot of messages to sift through. Nonetheless, I start wondering if I have bad breath, don't know how spell or something if noone even chimes in. I took a look at the souce code for the isapi_redirector2.dll. I can follow it pretty good since I spent 10 years programming in C. I see logging methods (functions in C), but I didn't see where the log file was created or where it was written to. I believe I see where the code specifies the registry enteries that it is looking for and there isn't any for log file. I didn't see the logLevel registry setting specified either which I saw in the jk2 Tomcat docs. I saw some statemens about writing event log statements which led me to check the Windows Application Log. I did find some warning messages written there by the isapi_redirector2.dll. However, I never did get jk2 working. I'll stick with isapi_redirector.dll for now. Nathan - Original Message - From: Januski, Ken [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Thursday, July 24, 2003 5:36 PM Subject: RE: Logfile for isapi_redirector2.dll? Since no one's responded I tried google. Eventually I found this page with the following sample registry entry. I've yet to try it but if it works I'll be very happy. It's about the same as registry entries for isapi_redirect and isapi_redirector. But all examples I've seen for isapi_redirector2.dll have not included a log_file. So I assumed there was a good reason. I guess I'll soon find out. http://www.wbtsystems.com/news/newsletters/july2003 [HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Jakarta Isapi Redirector\2.0] serverRoot=\\tomcat extensionUri=/jakarta/isapi_redirector2.dll log_file=\\tomcat\\logs\\iis_redirect.log logLevel=DEBUG workersFile=\\tomcat\\conf\\workers2.properties -Original Message- From: Januski, Ken [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 12:57 PM To: Tomcat Users List Subject: RE: Logfile for isapi_redirector2.dll? I've been meaning to ask this myself ever since I went to isapi_redirector2.dll. It sure would be nice to have a log. -Original Message- From: Nathan Ward [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 9:08 AM To: Tomcat Users List Subject: Logfile for isapi_redirector2.dll? Does isapi_redirector2.dll write a log file? If so, where does it put the file? I don't see any registry settings in the documentation that specifies the log file location. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: buiding 4.24
Eric J. Pinnell wrote: || Hi, || || For the JK2 connector you should use the 2.0.2 source. || || Then compile with: || || ./configure --with-apxs2=/path/to/apxs || || then make || || then mod_jk2.so should be in down in the build directory. || || You need to manually copy the file to the apache modules directory. || || The complete step by step is in the archives. But that's the long || and short of it. || || -e || || On Thu, 24 Jul 2003, Simon Pabst wrote: || ||| hmm weird, mod_jk2.so should be there after a successful make with ||| no errors, what connector source release did you download? ||| ||| What was your jk2 configure? ||| If you used --with-apache2 instead of --with-apxs2 then mod_jk2 ||| won't be built as .so but instead as static module into httpd core. ||| ||| Maybe its somewhere else, try a find: ||| find /path/to/jk - name '*.so' ||| ||| At 14:23 24.07.2003 -0400, you wrote: ||| Ugh...I've seen this posted before but I don't use mod_jk2 so I didn't pay much attention to the answer. It will be in the archives somewhere, or perhaps someone else has the answer. John Mark F wrote: | The compile completed with no problems but there is no 'make | install' it says to remember to execute | 'libtool --finish /usr/local/apache/modules' so I did but it | didn't do anything that I can see. Also I can't find a | mod_jk2.so. in the jk/build/jk2/apache2 directory there is | mod_jk2.o but no mod_jk2.so ? Thanks, | -Mark | Source is 2.0.2, Platform Solaris 8 Still doing the same thing. My configure is simply: ./configure --with-apxs2=/usr/local/apache/bin/apxs Everything but a .so file is created in the build directory. Thanks, -Mark - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
No, there is only one request that is sent from browser to Apache. Apache will reroute the request to Tomcat as needed. So what you are using now is the best configuration. --- [EMAIL PROTECTED] wrote: I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Unfortunately, this is an SSL protected site and none of the pages are cached. So my question is, what is the best approach with performance in mind? What is the fasted way to get the image and dynamic HTML back to the browser ? Thank you for your help in advance. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
servelet = one request image = one request 1 + 1 = 2 requests John Nguyen Anh Tuan wrote: No, there is only one request that is sent from browser to Apache. Apache will reroute the request to Tomcat as needed. So what you are using now is the best configuration. --- [EMAIL PROTECTED] wrote: I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Unfortunately, this is an SSL protected site and none of the pages are cached. So my question is, what is the best approach with performance in mind? What is the fasted way to get the image and dynamic HTML back to the browser ? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Classloaders (newbie)
Howdy, Everytime i run this, i get a remoteinovationerror (i resume from the EJBCLientClass) RemoteInvocationError can occur due to many reasons. You will need to supply the full stack trace and relevant code. Could this be a classloader issue? It could, and it could be many other things. Yoav Shapira This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: heap size
Howdy, Is there a rule-of-thumb for setting the heap size based on how many concurrent Tomcat processors/threads? Mine are mostly basic jsps and servlets generating HTML. As I'll be running several Tomcat instances for different apps, I need to allocate my 512M RAM to each Tomcat. No, and there can't be, as this behavior is 99% application-specific. If you can figure out the average heap space required by a user request to your application, multiply that by the peak number of concurrent requests you want to support... Yoav Shapira This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: log4j fighting with Commons-Logging in Tomcat 4.1
Howdy, Don't put anything in common/lib or common/classes. Put the log4j jar in the WEB-INF/lib directory of your webapp. Put the log4j configuration file in the WEB-INF/classes directory of your webapp. Yoav Shapira Millennium ChemInformatics -Original Message- From: Mike McCown [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 7:17 PM To: [EMAIL PROTECTED] Subject: log4j fighting with Commons-Logging in Tomcat 4.1 Not sure if this is a Tomcat or Commons-logging question, but it seems to be an issue of how Tomcat uses logging, so I'm asking here. I just started using Tomcat 4.1 (moving from another server). My apps were all coded to use the Log4j logger (1.2.8). Here's my problem. When starting up, Tomcat apparently uses commons-logging.jar (actually, it first uses commons-logging-api.jar??). It creates a default console appender for my loggers in a format I hate (milliseconds-since-start [Thread-x] LEVEL category - text). Now, my log4j.properties file, which I've put into the $CATALINA_HOME/common/classes directory, also sets up a console appender (in a format I like). Both of these appenders now write to the console, so I get 2 lines for each logger entry. Question: How the heck do I get rid of (or change the format of) the default console appender that Tomcat creates?? (Sorry if this is obvious - I've searched the FAQs, RTFM'd, and moved properties and jar files all over the place, but I *cannot* figure this out!!) Mike The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual(s) or organization(s) named above. If you are not an intended recipient, then any review, dissemination or copying of this email, any attachments or any information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system. This email and any attachments are not intended to constitute an offer or acceptance and do not create or evidence a contract or any amendment to a contract between Security Broadband and the intended recipient(s) or any other party. This email and any attachments may not be relied on by anyone as the basis of a contract. By sending this email, the sender does not consent to conduct (by electronic means) any transactions that may be the subject of this email. Any such consent must be separately and expressly obtained in writing manually executed by an authorized representative of Security Broadband. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: buiding 4.24
Hi, If you go to the top level of the tomcat-connectors tree and do a find ./ | grep mod_jk you don't see a mod_jk2.so somewhere? That's really odd. Time for science: :) cd /jakarta-tomcat-connectors-jk2-2.0.2-src/jk/native2/ ./configure --with-apxs2=/path/to/apxs make (it has to be GNU make) cd /jakarta-tomcat-connectors-jk2-2.0.2-src/jk/build/jk2/apache2 bash-2.04$ ls -l mod_jk2.so -rwxr-x--x 1 users 2554976 Jul 25 09:30 mod_jk2.so Hmm. I just did that and it worked for me. It's interesting that you aren't generating the file. -e On Fri, 25 Jul 2003, Mark F wrote: Eric J. Pinnell wrote: || Hi, || || For the JK2 connector you should use the 2.0.2 source. || || Then compile with: || || ./configure --with-apxs2=/path/to/apxs || || then make || || then mod_jk2.so should be in down in the build directory. || || You need to manually copy the file to the apache modules directory. || || The complete step by step is in the archives. But that's the long || and short of it. || || -e || || On Thu, 24 Jul 2003, Simon Pabst wrote: || ||| hmm weird, mod_jk2.so should be there after a successful make with ||| no errors, what connector source release did you download? ||| ||| What was your jk2 configure? ||| If you used --with-apache2 instead of --with-apxs2 then mod_jk2 ||| won't be built as .so but instead as static module into httpd core. ||| ||| Maybe its somewhere else, try a find: ||| find /path/to/jk - name '*.so' ||| ||| At 14:23 24.07.2003 -0400, you wrote: ||| Ugh...I've seen this posted before but I don't use mod_jk2 so I didn't pay much attention to the answer. It will be in the archives somewhere, or perhaps someone else has the answer. John Mark F wrote: | The compile completed with no problems but there is no 'make | install' it says to remember to execute | 'libtool --finish /usr/local/apache/modules' so I did but it | didn't do anything that I can see. Also I can't find a | mod_jk2.so. in the jk/build/jk2/apache2 directory there is | mod_jk2.o but no mod_jk2.so ? Thanks, | -Mark | Source is 2.0.2, Platform Solaris 8 Still doing the same thing. My configure is simply: ./configure --with-apxs2=/usr/local/apache/bin/apxs Everything but a .so file is created in the build directory. Thanks, -Mark - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
I don't mean to complain. I'm sure there are good reasons as you have mentioned why I haven't gotten more replies. I was trying to emphasize that I did appreciate the response in this case even though Ken didn't have much new info to offer. That said, I also asked what I thought were pretty simple questions about jk (isapi_redirector) like: Can I control what Tomcat webapps two virtual hosts (IIS web sites) can access? If not, how can I allow one IIS web site to access one webapp and another IIS web site access another but not both? Am I really the first one to have to do this or the first one that participates here? I guess so. That's OK though. It took me four days to figure out a solution, but I did learn a lot. I created a new valve that allows me to allow/deny access by server name (i.e. request.getServerName). Very similar to the RemoteHostValve. So, the answer that was basically that the ISAPI filter maps from IIS to Tomcat -- no other control provided by the filter. If you need more access control, use filters. I'm thinking that I'll submit my valve to be added to the Tomcat baseline. I suppose that the lack of response to my questions suggests that no one here knew that or at least no one that read my messages knew that. Maybe my subject lines didn't catch the right person's eye. I'm not bothered by it, but I am curious why I didn't get more replies. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 8:39 AM Subject: Re: Logfile for isapi_redirector2.dll? Not many people use IIS + Tomcat (comparatively speaking). Of those, the folks using JK2 (redirector2) is probably smaller still. Of those people, there's a good chance that they don't have an answer to your particular question. Would you rather they replied anyway and sent you off on a wild goose chase, wasting your time? John Nathan Ward wrote: I appreciate the reply. I've joined this mailing list about a week ago and posted several messages. I've not gotten many replies at all. I guess people are busy and there are a lot of messages to sift through. Nonetheless, I start wondering if I have bad breath, don't know how spell or something if noone even chimes in. I took a look at the souce code for the isapi_redirector2.dll. I can follow it pretty good since I spent 10 years programming in C. I see logging methods (functions in C), but I didn't see where the log file was created or where it was written to. I believe I see where the code specifies the registry enteries that it is looking for and there isn't any for log file. I didn't see the logLevel registry setting specified either which I saw in the jk2 Tomcat docs. I saw some statemens about writing event log statements which led me to check the Windows Application Log. I did find some warning messages written there by the isapi_redirector2.dll. However, I never did get jk2 working. I'll stick with isapi_redirector.dll for now. Nathan - Original Message - From: Januski, Ken [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Thursday, July 24, 2003 5:36 PM Subject: RE: Logfile for isapi_redirector2.dll? Since no one's responded I tried google. Eventually I found this page with the following sample registry entry. I've yet to try it but if it works I'll be very happy. It's about the same as registry entries for isapi_redirect and isapi_redirector. But all examples I've seen for isapi_redirector2.dll have not included a log_file. So I assumed there was a good reason. I guess I'll soon find out. http://www.wbtsystems.com/news/newsletters/july2003 [HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Jakarta Isapi Redirector\2.0] serverRoot=\\tomcat extensionUri=/jakarta/isapi_redirector2.dll log_file=\\tomcat\\logs\\iis_redirect.log logLevel=DEBUG workersFile=\\tomcat\\conf\\workers2.properties -Original Message- From: Januski, Ken [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 12:57 PM To: Tomcat Users List Subject: RE: Logfile for isapi_redirector2.dll? I've been meaning to ask this myself ever since I went to isapi_redirector2.dll. It sure would be nice to have a log. -Original Message- From: Nathan Ward [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 9:08 AM To: Tomcat Users List Subject: Logfile for isapi_redirector2.dll? Does isapi_redirector2.dll write a log file? If so, where does it put the file? I don't see any registry settings in the documentation that specifies the log file location. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For
Mod_jk on Solaris - has anyone actually ever built it?
Help! I am having trouble building mod_jk.so on Solaris 2.6 - and the binary directory for 2.6 at the jakarta site is empty. Has anyone actually succeeded in getting it built from source? The instructions don't seem to refer to the actual directory layout. Or, failing that, can anyone point me to an ftp site that has the built module? Thanks Max - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: How many concurrent user on Tomcat and Apache(New Bie)
Hi John, But john i have to deploy my applciation for client now client is ready for each hardware And my appication performance is good. Bu My Client is saying 10,000 concurrent user.. I have found in forum archive that people suffering from problem of concurrency when concurrent user become new 1000 Well my applciation basically handling serveral temporary XML files and at last update data into database. XML file documents. created by application is nearly 2-3 kb But i am not able to judge that what approach should i follow. Well i am thinking that worker.properties file will manage load balancing between several tomcat which work as a worker under Apache So how will i judge that how many tomcat or there is no need for multiple If ant suggesstion then please let me know?? tnanks sachin -Original Message- From: John Turner [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 6:03 PM To: Tomcat Users List Subject: Re: How many concurrent user on Tomcat and Apache(New Bie) You only need one workers.properties file. All it does is tell mod_jk.so where to find Tomcat. Regarding how many concurrent users that is impossible to say. It depends on what your definition of good hardware is, as well as the complexity and quality of the web applications you're hosting. It doesn't matter how much hardware you have or how many users you have, a single poorly designed web application can bring even the most robust server to a halt. John Sachin wrote: Can any body tell me that on a Apache web Server(tomcat as worker) hosting web site. How many concurrent user possible if Server has good hardware configuration. Do we need to maintains worker.properties file for many tomcat Instances under Apache.. If any body help me or any suggesstion Thanks Sachin - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Memory problems
Hi, I have a server that I am trying to deploy 36 webapplications to. The server is running redhat linux, with 2.5 gig ram and 4 XEON CPUs. On start up it runs about 30 applications and at that time tomcat failes, with java.lang.OutOfMemoryException. The top function shows many (192) java processes taking about 500 mb of memory, but I have -Xmx1500m and -Xms1g in JAVA_OPTS, so obviously the server is not out of memory. I don't know what is happening, as I have several servers running similar amount of webapps on windows, with out problems. Other things that run in this server are postgresql and apache (and really nothing else), so nothing is taking up the rest of the memory. We even tried to write a small java program that takes up memory in a loop, that worked fine, and could take up to 1500mb and then run out of memory. Am I looking at some kind of a limitation on tomcat (no more than specific amount of applications) or java (no more threads than some specific amount) ? Please reply, -reynir - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
Sounds like a bug in isapi_redirector to me, or perhaps its a problem with the way IIS handles virtual hosts. Or maybe I don't understand what you want to do. In Apache, I setup one virtual host = one webapp. hostA = appA hostB = appB With mod_jk (essentially isapi_redirector), appB is never available to hostA, and appA is never available to hostB. A 404 results if I try: http://www.hostA.com/appB John Nathan Ward wrote: I don't mean to complain. I'm sure there are good reasons as you have mentioned why I haven't gotten more replies. I was trying to emphasize that I did appreciate the response in this case even though Ken didn't have much new info to offer. That said, I also asked what I thought were pretty simple questions about jk (isapi_redirector) like: Can I control what Tomcat webapps two virtual hosts (IIS web sites) can access? If not, how can I allow one IIS web site to access one webapp and another IIS web site access another but not both? Am I really the first one to have to do this or the first one that participates here? I guess so. That's OK though. It took me four days to figure out a solution, but I did learn a lot. I created a new valve that allows me to allow/deny access by server name (i.e. request.getServerName). Very similar to the RemoteHostValve. So, the answer that was basically that the ISAPI filter maps from IIS to Tomcat -- no other control provided by the filter. If you need more access control, use filters. I'm thinking that I'll submit my valve to be added to the Tomcat baseline. I suppose that the lack of response to my questions suggests that no one here knew that or at least no one that read my messages knew that. Maybe my subject lines didn't catch the right person's eye. I'm not bothered by it, but I am curious why I didn't get more replies. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Servlets in a protected resource
Hi everyone, I have been able to setup JSPs in a protrected resource. The login page is displayed and everything works as expected. How do I setup a servlet in a protected resource to get the same effect? Jeff
Re: Mod_jk on Solaris - has anyone actually ever built it?
I built it for Solaris 8. Good luck building it for 6, it took me three days and 2 reinstalls of the OS to get it to build on 8. John Max Jester wrote: Help! I am having trouble building mod_jk.so on Solaris 2.6 - and the binary directory for 2.6 at the jakarta site is empty. Has anyone actually succeeded in getting it built from source? The instructions don't seem to refer to the actual directory layout. Or, failing that, can anyone point me to an ftp site that has the built module? Thanks Max - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Memory problems
More likely you are hitting an OS limit, such as number of processes, number of open files, number of connections, etc. I have 20 instances of Tomcat running on 4 GB of RAM, and about 800MB stays free. John Reynir Hübner wrote: Hi, I have a server that I am trying to deploy 36 webapplications to. The server is running redhat linux, with 2.5 gig ram and 4 XEON CPUs. On start up it runs about 30 applications and at that time tomcat failes, with java.lang.OutOfMemoryException. The top function shows many (192) java processes taking about 500 mb of memory, but I have -Xmx1500m and -Xms1g in JAVA_OPTS, so obviously the server is not out of memory. I don't know what is happening, as I have several servers running similar amount of webapps on windows, with out problems. Other things that run in this server are postgresql and apache (and really nothing else), so nothing is taking up the rest of the memory. We even tried to write a small java program that takes up memory in a loop, that worked fine, and could take up to 1500mb and then run out of memory. Am I looking at some kind of a limitation on tomcat (no more than specific amount of applications) or java (no more threads than some specific amount) ? Please reply, -reynir - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: How many concurrent user on Tomcat and Apache(New Bie)
Suggestion: build a test environment and test. You can't wing it. John Sachin wrote: Hi John, But john i have to deploy my applciation for client now client is ready for each hardware And my appication performance is good. Bu My Client is saying 10,000 concurrent user.. I have found in forum archive that people suffering from problem of concurrency when concurrent user become new 1000 Well my applciation basically handling serveral temporary XML files and at last update data into database. XML file documents. created by application is nearly 2-3 kb But i am not able to judge that what approach should i follow. Well i am thinking that worker.properties file will manage load balancing between several tomcat which work as a worker under Apache So how will i judge that how many tomcat or there is no need for multiple If ant suggesstion then please let me know?? tnanks sachin - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: how-to specify Java runtime options -Xmx128m, w/ Tomcat 4 as Win2k service
the script given below worked for me, as a .bat file, where the environment variables were substituted with literal directory paths, on a win2k (professional) os (sp4), and jdk 1.4.2. note: the tomcat.exe file specified in the script below only gets copied to the /bin directory of Tomcat if specify during install to install Tomcat as a service. I copied this file into /bin directory from first install, then ran .bat file. i am thankful for the help. -paul - Original Message - From: Koes, Derrick [EMAIL PROTECTED] To: 'Tomcat Users List' [EMAIL PROTECTED] Sent: Thursday, July 24, 2003 2:26 PM Subject: RE: how-to specify Java runtime options -Xmx128m, w/ Tomcat 4 as Win2k service You must rebuild the service with the new options. $CATALINA_HOME$\bin\tomcat.exe -install Apache Tomcat 4.1 $JAVA_HOME$\jre\bin\client\jvm.dll -Xmx512m -Xms256m -Djava.class.path=$CATALINA_HOME$\bin\bootstrap.jar -Djava.endorsed.dirs=$CATALINA_HOME$\common\endorsed -Dcatalina.home=$CATALINA_HOME$ -start org.apache.catalina.startup.BootstrapService -params start -stop org.apache.catalina.startup.BootstrapService -params stop -err $CATALINA_HOME$\logs\stderr.log Replace $CATALINA_HOME$ and $JAVA_HOME$ with the appropriate values. Change -Xmx and -Xms as appropriate. We use instsrv with the REMOVE command to remove the old service before running the above, or rename the service. This is easier than re-installing tomcat. -Original Message- From: Paul [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 1:53 PM To: [EMAIL PROTECTED] Subject: how-to specify Java runtime options -Xmx128m, w/ Tomcat 4 as Win2k service after assigning the following environment variables the java runtime options as follows: eg: JAVA_OPTS=-Xmx128m -Xms128m tried with: CATALINA_OPTS JAVA_OPTS amount of RAM memory used stayed aprox the same. Though i was expecting more memory to be used because of the extra memory that should have been allotted to java instance for Tomcat. Consequently, i am assuming that options were not applied by simply setting these environment variables, at least when Tomcat is started as a service. Where and how are java runtime options to be specified with Tomcat 4.1 (JDK 1.4.2) when it is started as a win2k service? [EMAIL PROTECTED] This electronic transmission is strictly confidential to Smith Nephew and intended solely for the addressee. It may contain information which is covered by legal, professional or other privilege. If you are not the intended addressee, or someone authorized by the intended addressee to receive transmissions on behalf of the addressee, you must not retain, disclose in any form, copy or take any action in reliance on this transmission. If you have received this transmission in error, please notify the sender as soon as possible and destroy this message. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Memory problems
Howdy, Check the OS limits for the user account that's running tomcat (e.g. ulimit -a). Max out whatever you can. Are you trying for one instance with 36 webapps or 36 instances of tomcat? (It doesn't really matter, both should work, I'm just curious) Yoav Shapira Millennium ChemInformatics -Original Message- From: Reynir Hübner [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 9:36 AM To: Tomcat Users List Subject: Memory problems Hi, I have a server that I am trying to deploy 36 webapplications to. The server is running redhat linux, with 2.5 gig ram and 4 XEON CPUs. On start up it runs about 30 applications and at that time tomcat failes, with java.lang.OutOfMemoryException. The top function shows many (192) java processes taking about 500 mb of memory, but I have -Xmx1500m and -Xms1g in JAVA_OPTS, so obviously the server is not out of memory. I don't know what is happening, as I have several servers running similar amount of webapps on windows, with out problems. Other things that run in this server are postgresql and apache (and really nothing else), so nothing is taking up the rest of the memory. We even tried to write a small java program that takes up memory in a loop, that worked fine, and could take up to 1500mb and then run out of memory. Am I looking at some kind of a limitation on tomcat (no more than specific amount of applications) or java (no more threads than some specific amount) ? Please reply, -reynir - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Memory problems
Hi John, Thanx for replying. Yes I was looking for such a limit somewhere, but I could not find it. I thought max number of processes in linux redhat (7.2) was 1024, (I am only taking up about 250 processes in all). You say you have 20 instances of tomcat, I have 36 hosts in one tomcat, so that's pretty different setup. Should I try setting up and run separate tomcat instances ? I used the rpm setup, and I have tomcat config files in one directory and startup scripts in another... Does anyone know of good directions (websites) on how to do this on linux (I would know how to do it in windows). Thanx -reynir -Original Message- From: John Turner [mailto:[EMAIL PROTECTED] Sent: 25. júlí 2003 13:47 To: Tomcat Users List Subject: Re: Memory problems More likely you are hitting an OS limit, such as number of processes, number of open files, number of connections, etc. I have 20 instances of Tomcat running on 4 GB of RAM, and about 800MB stays free. John Reynir Hübner wrote: Hi, I have a server that I am trying to deploy 36 webapplications to. The server is running redhat linux, with 2.5 gig ram and 4 XEON CPUs. On start up it runs about 30 applications and at that time tomcat failes, with java.lang.OutOfMemoryException. The top function shows many (192) java processes taking about 500 mb of memory, but I have -Xmx1500m and -Xms1g in JAVA_OPTS, so obviously the server is not out of memory. I don't know what is happening, as I have several servers running similar amount of webapps on windows, with out problems. Other things that run in this server are postgresql and apache (and really nothing else), so nothing is taking up the rest of the memory. We even tried to write a small java program that takes up memory in a loop, that worked fine, and could take up to 1500mb and then run out of memory. Am I looking at some kind of a limitation on tomcat (no more than specific amount of applications) or java (no more threads than some specific amount) ? Please reply, -reynir - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Mod_jk on Solaris - has anyone actually ever built it?
You might want to try JK2. I am able to build mod_jk2.so on Solaris 7 and 2.6 and 7 are pretty close to each other. You might want to give it a whirl. -e On Fri, 25 Jul 2003, John Turner wrote: I built it for Solaris 8. Good luck building it for 6, it took me three days and 2 reinstalls of the OS to get it to build on 8. John Max Jester wrote: Help! I am having trouble building mod_jk.so on Solaris 2.6 - and the binary directory for 2.6 at the jakarta site is empty. Has anyone actually succeeded in getting it built from source? The instructions don't seem to refer to the actual directory layout. Or, failing that, can anyone point me to an ftp site that has the built module? Thanks Max - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Memory problems
Our setups are different, my point was that my setup is capable of addressing more RAM than you have (fewer Tomcat but more RAM), which leads me to believe your problems are OS limit related. I wouldn't setup separate Tomcat instances unless you determined there was a need for it. For my Tomcat user, here are the limits: sh-2.05$ ulimit -a core file size (blocks) 0 data seg size (kbytes) unlimited file size (blocks) unlimited max locked memory (kbytes) unlimited max memory size (kbytes)unlimited open files 1024 pipe size (512 bytes) 8 stack size (kbytes) 8192 cpu time (seconds) unlimited max user processes 16384 virtual memory (kbytes) unlimited That's RH 7.2, dual processor, 4 GB RAM. John Reynir Hübner wrote: Hi John, Thanx for replying. Yes I was looking for such a limit somewhere, but I could not find it. I thought max number of processes in linux redhat (7.2) was 1024, (I am only taking up about 250 processes in all). You say you have 20 instances of tomcat, I have 36 hosts in one tomcat, so that's pretty different setup. Should I try setting up and run separate tomcat instances ? I used the rpm setup, and I have tomcat config files in one directory and startup scripts in another... Does anyone know of good directions (websites) on how to do this on linux (I would know how to do it in windows). Thanx -reynir -Original Message- From: John Turner [mailto:[EMAIL PROTECTED] Sent: 25. júlí 2003 13:47 To: Tomcat Users List Subject: Re: Memory problems More likely you are hitting an OS limit, such as number of processes, number of open files, number of connections, etc. I have 20 instances of Tomcat running on 4 GB of RAM, and about 800MB stays free. John Reynir Hübner wrote: Hi, I have a server that I am trying to deploy 36 webapplications to. The server is running redhat linux, with 2.5 gig ram and 4 XEON CPUs. On start up it runs about 30 applications and at that time tomcat failes, with java.lang.OutOfMemoryException. The top function shows many (192) java processes taking about 500 mb of memory, but I have -Xmx1500m and -Xms1g in JAVA_OPTS, so obviously the server is not out of memory. I don't know what is happening, as I have several servers running similar amount of webapps on windows, with out problems. Other things that run in this server are postgresql and apache (and really nothing else), so nothing is taking up the rest of the memory. We even tried to write a small java program that takes up memory in a loop, that worked fine, and could take up to 1500mb and then run out of memory. Am I looking at some kind of a limitation on tomcat (no more than specific amount of applications) or java (no more threads than some specific amount) ? Please reply, -reynir - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Servlets in a protected resource
Thanks Tim. I got it working. Jeff -Original Message- From: Tim Funk [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 6:39 AM To: Tomcat Users List Subject: Re: Servlets in a protected resource Security contraints are always made on the incoming URI. Therefore, whatever you map your servlets paths to you'll need to create the appropriate constraints. -Tim Jeff Cummings wrote: Hi everyone, I have been able to setup JSPs in a protrected resource. The login page is displayed. How do I setup a servlet in a protected resource to get the same effect? Jeff - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 9:42 AM Subject: Re: Logfile for isapi_redirector2.dll? Sounds like a bug in isapi_redirector to me, or perhaps its a problem with the way IIS handles virtual hosts. Or maybe I don't understand what you want to do. In Apache, I setup one virtual host = one webapp. hostA = appA hostB = appB With mod_jk (essentially isapi_redirector), appB is never available to hostA, and appA is never available to hostB. A 404 results if I try: http://www.hostA.com/appB John Nathan Ward wrote: I don't mean to complain. I'm sure there are good reasons as you have mentioned why I haven't gotten more replies. I was trying to emphasize that I did appreciate the response in this case even though Ken didn't have much new info to offer. That said, I also asked what I thought were pretty simple questions about jk (isapi_redirector) like: Can I control what Tomcat webapps two virtual hosts (IIS web sites) can access? If not, how can I allow one IIS web site to access one webapp and another IIS web site access another but not both? Am I really the first one to have to do this or the first one that participates here? I guess so. That's OK though. It took me four days to figure out a solution, but I did learn a lot. I created a new valve that allows me to allow/deny access by server name (i.e. request.getServerName). Very similar to the RemoteHostValve. So, the answer that was basically that the ISAPI filter maps from IIS to Tomcat -- no other control provided by the filter. If you need more access control, use filters. I'm thinking that I'll submit my valve to be added to the Tomcat baseline. I suppose that the lack of response to my questions suggests that no one here knew that or at least no one that read my messages knew that. Maybe my subject lines didn't catch the right person's eye. I'm not bothered by it, but I am curious why I didn't get more replies. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
iPlanet and Tomcat integration on solaris
I am trying to integrate iPlanet 4.1 and Tomcat 4.1.24 on a Solaris 8. I have had some level of success but have encountered some very frustrating problems. I have searched extensively for documentattion that might help me but have come up empty handed. My biggest problems rghts now are a) The remoteUser is not being passed from iPlanet to Tomcat. My JSPS are reading the remoteUser using the request.getRemoteUser() method. I am using the RequestDumperValve to see what is being passed to Tomcat. The remoteUser value is invariably set to null. I looked at the source code for the version of nsapi_connector.so that I built from jakarta-tomcat-connectors-4.1.24.src. It looks to be assigning to remoteUser the value of auth-user in the request-vars pblock. this value is definitely set in that pblock. Not sure why it doesn't get set in the request sent to Tomcat b) On many requests for jsps, tomcat returns a jasper exception which says oracle/jdbc/pool/OracleDataSource I am assuming it is not finding this class. I have this class in an archive in the applications WEB_INF/lib directory. This archive is a .zip file. Does anyone know if the classpath that Tomcat dynamically builds for applications looks for .zip files? Perhaps it is only looking for .jar archives? Thanks in advance for any help you can provide. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
Hi, John, Lets say you have one static HTML page with one image in it. You can serve it with Apache stand alone (or any stand alone Web server). So howmany requests are there ? Do you count : HTML : 1 request Image : 1 request 1+1=2 requests The answer is : You just request for a page, and whatever in it will be sent back along with the page. Please look into the RFC document of HTTP and HTTPS protocol to see how a request is handled. With a combination of Apache/Tomcat: The fact is : Every HTTP/HTTPS request is sent to Apache Webserver. If there is a request to JSP/Servlet, it will be rerouted from Apache to Tomcat (this is done on the server, nothing concerned to browser), then when the HTML page is created from JSP/Servlet in Tomcat, it is sent back to Apache, then Apache sends the HTML page back to the browser. So the user sees only a scenario like this: Request sent to Apache. Whatever request it is, receive back a HTML page. Thus, the amount of requests for one JSP/Servlet with image sent to Apache/Tomcat = Exactly the amount of requests for one static HTML page with images sent to a stand alone Apache (or whatever stand alone Webserver). Of course, time will be needed to send requests from Apache to Tomcat and for Tomcat to generate HTML from JSP/Servlet and send it back to Apache. However, this is done on the server and has nothing to do with browser. It depends on how you organize the site. If the site contains mix data (many static HTML pages and JSP/Servlet), you should use a combination Apache/Tomcat, because Apache handles static HTML pages must faster than Tomcat does. However, if you have only JSP/Servlet, Tomcat stand alone is fine, because you have no use of Apache, except rerouting JSP/Servlet to Tomcat. It is a waste of time, because you can send JSP/Servlet requests directly to Tomcat if you use Tomcat stand alone. --- John Turner [EMAIL PROTECTED] wrote: servelet = one request image = one request 1 + 1 = 2 requests John Nguyen Anh Tuan wrote: No, there is only one request that is sent from browser to Apache. Apache will reroute the request to Tomcat as needed. So what you are using now is the best configuration. --- [EMAIL PROTECTED] wrote: I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Unfortunately, this is an SSL protected site and none of the pages are cached. So my question is, what is the best approach with performance in mind? What is the fasted way to get the image and dynamic HTML back to the browser ? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: iPlanet and Tomcat integration on solaris
That's a classic problem. Renaming the classes12.zip to classes12.jar is your first step in debugging database connection problems. -Original Message- From: Peter Cline [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 9:44 AM To: [EMAIL PROTECTED] Subject: iPlanet and Tomcat integration on solaris snip b) On many requests for jsps, tomcat returns a jasper exception which says oracle/jdbc/pool/OracleDataSource I am assuming it is not finding this class. I have this class in an archive in the applications WEB_INF/lib directory. This archive is a .zip file. Does anyone know if the classpath that Tomcat dynamically builds for applications looks for .zip files? Perhaps it is only looking for .jar archives? Thanks in advance for any help you can provide. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: performance of serving static data? apache or tomcat
Howdy, Lets say you have one static HTML page with one image in it. You can serve it with Apache stand alone (or any stand alone Web server). So howmany requests are there ? Do you count : HTML : 1 request Image : 1 request 1+1=2 requests The answer is : You just request for a page, and whatever in it will be sent back along with the page. Please look into the RFC document of HTTP and HTTPS protocol to see how a request is handled. Umm, no. It's easy to test that the above is false using the telnet client approach illustrated earlier in this thread. One static HTML page with N images will result in 1 + N HTTP requests from the browser, as Senor Turner said. Yoav Shapira This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
Thanks for the hint, I've read the spec many times. I'm not clear what you are saying. Its two requests, whether its Apache + Tomcat, Apache alone, or Tomcat alone. Check your access logs...you don't see one log entry for a HTML page with one image, you see two: a 200 for the HTML page, and a 200 for the image. Whether that HTML page is a static page, or the output from JSP, ASP, servlet, perl script, or anything else. Your statement was No, there is only one request that is sent from browser to Apache. Apache will reroute the request to Tomcat as needed. This is false, unless you are speaking only to the request for the JSP. Apache will receive one request for the JSP/servlet, which will be routed to Tomcat. If the HTML output of the JSP/servlet includes an IMG tag, then Apache will receive a second request for the image. 1 + 1 = 2. John Nguyen Anh Tuan wrote: Hi, John, Lets say you have one static HTML page with one image in it. You can serve it with Apache stand alone (or any stand alone Web server). So howmany requests are there ? Do you count : HTML : 1 request Image : 1 request 1+1=2 requests The answer is : You just request for a page, and whatever in it will be sent back along with the page. Please look into the RFC document of HTTP and HTTPS protocol to see how a request is handled. With a combination of Apache/Tomcat: The fact is : Every HTTP/HTTPS request is sent to Apache Webserver. If there is a request to JSP/Servlet, it will be rerouted from Apache to Tomcat (this is done on the server, nothing concerned to browser), then when the HTML page is created from JSP/Servlet in Tomcat, it is sent back to Apache, then Apache sends the HTML page back to the browser. So the user sees only a scenario like this: Request sent to Apache. Whatever request it is, receive back a HTML page. Thus, the amount of requests for one JSP/Servlet with image sent to Apache/Tomcat = Exactly the amount of requests for one static HTML page with images sent to a stand alone Apache (or whatever stand alone Webserver). Of course, time will be needed to send requests from Apache to Tomcat and for Tomcat to generate HTML from JSP/Servlet and send it back to Apache. However, this is done on the server and has nothing to do with browser. It depends on how you organize the site. If the site contains mix data (many static HTML pages and JSP/Servlet), you should use a combination Apache/Tomcat, because Apache handles static HTML pages must faster than Tomcat does. However, if you have only JSP/Servlet, Tomcat stand alone is fine, because you have no use of Apache, except rerouting JSP/Servlet to Tomcat. It is a waste of time, because you can send JSP/Servlet requests directly to Tomcat if you use Tomcat stand alone. --- John Turner [EMAIL PROTECTED] wrote: servelet = one request image = one request 1 + 1 = 2 requests John Nguyen Anh Tuan wrote: No, there is only one request that is sent from browser to Apache. Apache will reroute the request to Tomcat as needed. So what you are using now is the best configuration. --- [EMAIL PROTECTED] wrote: I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Unfortunately, this is an SSL protected site and none of the pages are cached. So my question is, what is the best approach with performance in mind? What is the fasted way to get the image and dynamic HTML back to the browser ? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Easy question on Tomcat 4.0 and SSL+HTTPS via localhost:8843. Loc k-Icon disappear from the Browser.
Check the 'next page' link if its http or https -Original Message- From: Zaragoza, Carles [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 6:38 AM To: Tomcat Users List ([EMAIL PROTECTED]) Subject: Easy question on Tomcat 4.0 and SSL+HTTPS via localhost:8843. Loc k-Icon disappear from the Browser. I have installed the SSL support for Tomcat 4.0.4 and almost everything works. I followed all the guidelines from http://jakarta.apache.org/tomcat/tomcat-4.0-doc/ssl-howto.html http://jakarta.apache.org/tomcat/tomcat-4.0-doc/ssl-howto.html But for instance when I type https://localhost:8443/ https://localhost:8443/ into my browser it works, my Internet Ms-Explorer 6.0 shows me the Certificate form in order to accepted it, on the right-bottom area an lock-icon appears telling me that this transaction In under Secure guide but on the next page, the lock icon disappears. Could somebody help me out? Have a nice weekend, Carles Zaragoza. -- The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: iPlanet and Tomcat integration on solaris
a) The remoteUser is not being passed from iPlanet to Tomcat. My JSPS are reading the remoteUser using the request.getRemoteUser() method. I am using the RequestDumperValve to see what is being passed to Tomcat. The remoteUser value is invariably set to null. I looked at the source code for the version of nsapi_connector.so that I built from jakarta-tomcat-connectors-4.1.24.src. It looks to be assigning to remoteUser the value of auth-user in the request-vars pblock. this value is definitely set in that pblock. Not sure why it doesn't get set in the request sent to Tomcat If it's any consolation we have that problem too. We are trying to concoct a solution now. -e - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
Hi, John, Thank you for the discussion. However, the amount of requests for JSP/Servlet with one image sent from a browser to Apache/Tomcat will equal exactly the amount of requests for one static HTML with one image sent from a browser to a stand alone Web server, is that right ? In either cases, are there 2 requests sent from the browser to the server (no matter which server) ? --- John Turner [EMAIL PROTECTED] wrote: Thanks for the hint, I've read the spec many times. I'm not clear what you are saying. Its two requests, whether its Apache + Tomcat, Apache alone, or Tomcat alone. Check your access logs...you don't see one log entry for a HTML page with one image, you see two: a 200 for the HTML page, and a 200 for the image. Whether that HTML page is a static page, or the output from JSP, ASP, servlet, perl script, or anything else. Your statement was No, there is only one request that is sent from browser to Apache. Apache will reroute the request to Tomcat as needed. This is false, unless you are speaking only to the request for the JSP. Apache will receive one request for the JSP/servlet, which will be routed to Tomcat. If the HTML output of the JSP/servlet includes an IMG tag, then Apache will receive a second request for the image. 1 + 1 = 2. John Nguyen Anh Tuan wrote: Hi, John, Lets say you have one static HTML page with one image in it. You can serve it with Apache stand alone (or any stand alone Web server). So howmany requests are there ? Do you count : HTML : 1 request Image : 1 request 1+1=2 requests The answer is : You just request for a page, and whatever in it will be sent back along with the page. Please look into the RFC document of HTTP and HTTPS protocol to see how a request is handled. With a combination of Apache/Tomcat: The fact is : Every HTTP/HTTPS request is sent to Apache Webserver. If there is a request to JSP/Servlet, it will be rerouted from Apache to Tomcat (this is done on the server, nothing concerned to browser), then when the HTML page is created from JSP/Servlet in Tomcat, it is sent back to Apache, then Apache sends the HTML page back to the browser. So the user sees only a scenario like this: Request sent to Apache. Whatever request it is, receive back a HTML page. Thus, the amount of requests for one JSP/Servlet with image sent to Apache/Tomcat = Exactly the amount of requests for one static HTML page with images sent to a stand alone Apache (or whatever stand alone Webserver). Of course, time will be needed to send requests from Apache to Tomcat and for Tomcat to generate HTML from JSP/Servlet and send it back to Apache. However, this is done on the server and has nothing to do with browser. It depends on how you organize the site. If the site contains mix data (many static HTML pages and JSP/Servlet), you should use a combination Apache/Tomcat, because Apache handles static HTML pages must faster than Tomcat does. However, if you have only JSP/Servlet, Tomcat stand alone is fine, because you have no use of Apache, except rerouting JSP/Servlet to Tomcat. It is a waste of time, because you can send JSP/Servlet requests directly to Tomcat if you use Tomcat stand alone. --- John Turner [EMAIL PROTECTED] wrote: servelet = one request image = one request 1 + 1 = 2 requests John Nguyen Anh Tuan wrote: No, there is only one request that is sent from browser to Apache. Apache will reroute the request to Tomcat as needed. So what you are using now is the best configuration. --- [EMAIL PROTECTED] wrote: I am working on a servlet that will be served from tomcat which is connected to apache. Currently I have the servlet being handled by tomcat, and the image handled by apache. Won't this require 2 get requests by the browser? One being the image, and one being the servlet? Unfortunately, this is an SSL protected site and none of the pages are cached. So my question is, what is the best approach with performance in mind? What is the fasted way to get the image and dynamic HTML back to the browser ? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
Yes, that is exactly what I have been saying. John Nguyen Anh Tuan wrote: Hi, John, Thank you for the discussion. However, the amount of requests for JSP/Servlet with one image sent from a browser to Apache/Tomcat will equal exactly the amount of requests for one static HTML with one image sent from a browser to a stand alone Web server, is that right ? In either cases, are there 2 requests sent from the browser to the server (no matter which server) ? --- John Turner [EMAIL PROTECTED] wrote: Thanks for the hint, I've read the spec many times. I'm not clear what you are saying. Its two requests, whether its Apache + Tomcat, Apache alone, or Tomcat alone. Check your access logs...you don't see one log entry for a HTML page with one image, you see two: a 200 for the HTML page, and a 200 for the image. Whether that HTML page is a static page, or the output from JSP, ASP, servlet, perl script, or anything else. Your statement was No, there is only one request that is sent from browser to Apache. Apache will reroute the request to Tomcat as needed. This is false, unless you are speaking only to the request for the JSP. Apache will receive one request for the JSP/servlet, which will be routed to Tomcat. If the HTML output of the JSP/servlet includes an IMG tag, then Apache will receive a second request for the image. 1 + 1 = 2. John - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single Tomcat instance. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:47 AM Subject: Re: Logfile for isapi_redirector2.dll? uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: performance of serving static data? apache or tomcat
Ok there's just one tiny clarification I might offer, in case this is the problem. Because I think *both* of you are saying the same thing, but maybe not (if this is indeed the difficulty). -Original Message- From: John Turner [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:20 AM To: Tomcat Users List Subject: Re: performance of serving static data? apache or tomcat Yes, that is exactly what I have been saying. John Nguyen Anh Tuan wrote: Hi, John, Thank you for the discussion. However, the amount of requests for JSP/Servlet with one image sent from a browser to Apache/Tomcat will equal exactly the amount of requests for one static HTML with one image sent from a browser to a stand alone Web server, is that right ? That depends on what you mean by Apache/Tomcat * Case 1 Static HTML which contains 1 Image Apache web server will receive two requests. ONE initial request for the page ONE subsequent request for the image * Case 2 JSP which contains 1 Image Apache web server will receive two requests. ONE initial request for a JSP page which is forwarded to Apache Tomcat. ONE subsequent request for the image, received by Apache Web Server (Apache Tomcat does not receive this request) So for Case 2, Apache *Tomcat* receives ONE request (for the JSP) Base as with Case 1, Apache *Web Server* receives two. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
OnSessionEnd for Tomcat ?
Hello All, I am looking for a way to detect when a session ends in tomcat and do a few things such as temp dir clean up, and so on. Can anyone point me to the proper documentation or provide info on this? thanks in advance... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: OnSessionEnd for Tomcat ?
Look at the HttpSessionListener interface. http://java.sun.com/j2ee/sdk_1.3/techdocs/api/ Create the sessionDestroyed() implementation and add a listener element to web.xml: http://java.sun.com/dtd/web-app_2_3.dtd -Original Message- From: Robert Priest [mailto:[EMAIL PROTECTED] Sent: 25 July 2003 16:50 To: '[EMAIL PROTECTED]' Subject: OnSessionEnd for Tomcat ? Hello All, I am looking for a way to detect when a session ends in tomcat and do a few things such as temp dir clean up, and so on. Can anyone point me to the proper documentation or provide info on this? thanks in advance... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
I guess I misunderstood what uriworkermap.properties was doingI was under the impression that was where you mapped URIs to specific workers. In JK2 (mod_jk2.so), it might look something like: [uri:www.hostA.com/appA/*.jsp] There's no counterpart to that in an IIS + Tomcat configuration? I find that surprising. John Nathan Ward wrote: Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single Tomcat instance. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:47 AM Subject: Re: Logfile for isapi_redirector2.dll? uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: OnSessionEnd for Tomcat ?
Thanks. I will take a look... -Original Message- From: Bodycombe, Andrew [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:52 AM To: 'Tomcat Users List' Subject: RE: OnSessionEnd for Tomcat ? Look at the HttpSessionListener interface. http://java.sun.com/j2ee/sdk_1.3/techdocs/api/ Create the sessionDestroyed() implementation and add a listener element to web.xml: http://java.sun.com/dtd/web-app_2_3.dtd -Original Message- From: Robert Priest [mailto:[EMAIL PROTECTED] Sent: 25 July 2003 16:50 To: '[EMAIL PROTECTED]' Subject: OnSessionEnd for Tomcat ? Hello All, I am looking for a way to detect when a session ends in tomcat and do a few things such as temp dir clean up, and so on. Can anyone point me to the proper documentation or provide info on this? thanks in advance... - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: performance of serving static data? apache or tomcat
I wasn't making that distinction, but I can see how that might have caused some difficulty. It's two total requests, regardless of what does the handling. John Mike Curwen wrote: Ok there's just one tiny clarification I might offer, in case this is the problem. Because I think *both* of you are saying the same thing, but maybe not (if this is indeed the difficulty). -Original Message- From: John Turner [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:20 AM To: Tomcat Users List Subject: Re: performance of serving static data? apache or tomcat Yes, that is exactly what I have been saying. John Nguyen Anh Tuan wrote: Hi, John, Thank you for the discussion. However, the amount of requests for JSP/Servlet with one image sent from a browser to Apache/Tomcat will equal exactly the amount of requests for one static HTML with one image sent from a browser to a stand alone Web server, is that right ? That depends on what you mean by Apache/Tomcat * Case 1 Static HTML which contains 1 Image Apache web server will receive two requests. ONE initial request for the page ONE subsequent request for the image * Case 2 JSP which contains 1 Image Apache web server will receive two requests. ONE initial request for a JSP page which is forwarded to Apache Tomcat. ONE subsequent request for the image, received by Apache Web Server (Apache Tomcat does not receive this request) So for Case 2, Apache *Tomcat* receives ONE request (for the JSP) Base as with Case 1, Apache *Web Server* receives two. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
help: Cannot find extension
Hi all, i've built a webapp in which a jar in the WEB-INF\lib directory contains the following extension dependency specifications in the manifest file of the jar file (under the META-INF directory): Extension-List: mysql mysql-Extension-Name: org.gjt.mm.mysql mysql-Implementation-URL: http://192.168.0.4/mm.mysql-2.0.13-bin.jar I have created the file mm.mysql-2.0.13-bin.jar with the following manifest file: Extension-Name: org.gjt.mm.mysql My problem is that no matter where I put this mm.mysql-2.0.13-bin.jar (whether it is available at the specified location, whether I put it in the tomcat common\lib, server\lib, lib, classes the javahome\jre\lib\ext dir etc, I can't get the application to work. It detects the mysql package is missing and shows an error message, so it partly works: it detects the dependency, but apparently it cannot be adaquately resolved. (Note that if I do not specify the extensions in both jar files and just put the mysql jar in the lib directory, everything works fine, but I wanted to test the extension mechanism as specified in the servlet 2.3 specs). I run tomcat under windows (for local testing only) version 4.0.1, jdk 1.4.2 Does anyone have a clue about what I am doing wrong? Hope you can help! Hans - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Servlet Caching question
Hello, I wanted to know how Tomcat caches the output of Servlets/JSPs. Could someone direct me to where I could find some information on that? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca
RE: Tomcat not working behind a NAT?
For this particular Servlet call we are not accessing any databases. DTDs? Not really familiar with those...I will check. I don't think we are trying to resolve hosts. Here is something we got from our client: -- The sniffer log showed the NATed address in one of the http requests ... following along the line of tomcat not using a localhost for addressing requests even if they're local to the system ... What options are there to specify the address for tomcat under which to start ? It must perform a lookup on DNS to translate the address, can we use the /etc/hosts file to create a 'fixed' address that won't be affected by DNS ? This may not resolve it either ... as which one would you actually put in to allow both 'local' access vs 'outside' access ... -- Erin Dalzell eXpresso Product Specialist Epic Data 604.207.7699 -Original Message- From: Tim Funk [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 5:46 PM To: Tomcat Users List Subject: Re: Tomcat not working behind a NAT? It shouldn't use high ports. Are you running any database services or other services? Are your dtd's not correct and its trying actually pull foriegn assets via http? Are you trying to resolve hosts in your access log? (or similar) Use your sniffer to see the type of request being performed on the hight port. -Tim Erin Dalzell wrote: Hi there, We have just discovered that our tomcat web app is not working correctly behind a NAT. Our actual web app works fine, but when we try to access our management pages via http. It doesn't work. Any static pages are served up correctly through our defined tomcat port (6300), but any dynamic content (to several different servlets) don't work. When we run a sniffer, it looks like tomcat tries to communicate with itself on a very high (and random) port. For example, if our tomcat is accessible locally as 10.10.10.10 and externally as 204.1.1.1 and we access from withing our network (10.10.x.x) everything works fine and tomcat is able to talk to itself on port 45000. But if I access it from an external site, tomcat tries to communicate with itself on the 204.1.1.1 address and the NAT doesn't like it. So, I have a few questions: 1) why doesn't tomcat (we are using version 4) use localhost to communicate with itself? 2) anyone else seen this problem? 3) can the high port be configured? Thoughts? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] This email and any attachments are intended only for use by the addressees named in this email and may contain legally privileged and/or confidential information. If you are not the intended recipient of this email, you are hereby notified that any use, dissemination, distribution or copying of this e-mail or any attachments is strictly prohibited. If you have received this email in error, please immediately notify me by return email and by phone at 604-273-9146, permanently delete the original and any copy of this email and any attachments from your systems and destroy any printouts of them.
Tomcat: SSL client authentication
Hello all, I'm Best regards, Dmitry. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Servlet Caching question
Howdy, Basically, tomcat doesn't. Yoav Shapira Millennium ChemInformatics -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: Servlet Caching question Hello, I wanted to know how Tomcat caches the output of Servlets/JSPs. Could someone direct me to where I could find some information on that? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Logfile for isapi_redirector2.dll?
Well we haven't solved the question about the logfile but the second question is interesting as well:-) I think that the problem is that there is only one registry entry. If you could have more than one you could configure different isapi_filters in IIS Management Console, then use the one you want for each application. With different registry entries you could then use more than one workers2.properties file. That in turn would allow various mappings in Tomcat. But from what I can tell the workers2.properties file says I'll handle everthing that matches these patterns. If it allowed you to say send requesting this pattern here, ones matching this other pattern here, etc. that also would solve the problem. This may be just rehashing what Nathan has already said. But I just wanted to take a look for myself and see if I could get a clearer understanding of just what was happening. I think the lack of documentation on isapi_redirector2 does add to the problem but as John has said before there may be a very good reason for that. -Original Message- From: Nathan Ward [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:37 AM To: Tomcat Users List Subject: Re: Logfile for isapi_redirector2.dll? Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single Tomcat instance. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:47 AM Subject: Re: Logfile for isapi_redirector2.dll? uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Servlet Caching question
Okay, So if I want to do some caching for say: GET requests. Is there a way to cache output based on URL? Is this kind of thing simply not supported, and I will have to go to some other application server. _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca -Original Message- From: Shapira, Yoav [mailto:[EMAIL PROTECTED] Sent: July 25, 2003 1:59 PM To: Tomcat Users List Subject: RE: Servlet Caching question Howdy, Basically, tomcat doesn't. Yoav Shapira Millennium ChemInformatics -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: Servlet Caching question Hello, I wanted to know how Tomcat caches the output of Servlets/JSPs. Could someone direct me to where I could find some information on that? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Tomcat not working behind a NAT?
I still think you are barking up the wrong tree here. If I had to guess I would say that 95% of all internet faceing Tomcat servers are behind some kind of NAT device. One thing to consider. NAT only translates the IP in the IP header and doesn't change the data payload. So if you are, for whatever reason, using an IP address that is getting sent along in the payload and trying to redirect to it or whatever, NAT won't change that. Kinda how SQLNet doesn't like NAT devices. Because the users IP is embedded in the payload as part of the protocol. So it goofs up when the IP header and the IP in the payload don't match. But what you are thinking below is the first thing I would do. Make sure the machine on the outside see's the correct hostname/IP number and the machine on the inside see's that same hostname as the inside IP address. You can do that via the hosts file if you like. -e On Fri, 25 Jul 2003, Erin Dalzell wrote: For this particular Servlet call we are not accessing any databases. DTDs? Not really familiar with those...I will check. I don't think we are trying to resolve hosts. Here is something we got from our client: -- The sniffer log showed the NATed address in one of the http requests ... following along the line of tomcat not using a localhost for addressing requests even if they're local to the system ... What options are there to specify the address for tomcat under which to start ? It must perform a lookup on DNS to translate the address, can we use the /etc/hosts file to create a 'fixed' address that won't be affected by DNS ? This may not resolve it either ... as which one would you actually put in to allow both 'local' access vs 'outside' access ... -- Erin Dalzell eXpresso Product Specialist Epic Data 604.207.7699 -Original Message- From: Tim Funk [mailto:[EMAIL PROTECTED] Sent: Thursday, July 24, 2003 5:46 PM To: Tomcat Users List Subject: Re: Tomcat not working behind a NAT? It shouldn't use high ports. Are you running any database services or other services? Are your dtd's not correct and its trying actually pull foriegn assets via http? Are you trying to resolve hosts in your access log? (or similar) Use your sniffer to see the type of request being performed on the hight port. -Tim Erin Dalzell wrote: Hi there, We have just discovered that our tomcat web app is not working correctly behind a NAT. Our actual web app works fine, but when we try to access our management pages via http. It doesn't work. Any static pages are served up correctly through our defined tomcat port (6300), but any dynamic content (to several different servlets) don't work. When we run a sniffer, it looks like tomcat tries to communicate with itself on a very high (and random) port. For example, if our tomcat is accessible locally as 10.10.10.10 and externally as 204.1.1.1 and we access from withing our network (10.10.x.x) everything works fine and tomcat is able to talk to itself on port 45000. But if I access it from an external site, tomcat tries to communicate with itself on the 204.1.1.1 address and the NAT doesn't like it. So, I have a few questions: 1) why doesn't tomcat (we are using version 4) use localhost to communicate with itself? 2) anyone else seen this problem? 3) can the high port be configured? Thoughts? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] This email and any attachments are intended only for use by the addressees named in this email and may contain legally privileged and/or confidential information. If you are not the intended recipient of this email, you are hereby notified that any use, dissemination, distribution or copying of this e-mail or any attachments is strictly prohibited. If you have received this email in error, please immediately notify me by return email and by phone at 604-273-9146, permanently delete the original and any copy of this email and any attachments from your systems and destroy any printouts of them. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Servlet Caching question
Just one question: The output from a servlet/JSP is dynamic, so why would you want to cache the output? -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: 25 July 2003 18:03 To: 'Tomcat Users List' Subject: RE: Servlet Caching question Okay, So if I want to do some caching for say: GET requests. Is there a way to cache output based on URL? Is this kind of thing simply not supported, and I will have to go to some other application server. _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca -Original Message- From: Shapira, Yoav [mailto:[EMAIL PROTECTED] Sent: July 25, 2003 1:59 PM To: Tomcat Users List Subject: RE: Servlet Caching question Howdy, Basically, tomcat doesn't. Yoav Shapira Millennium ChemInformatics -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: Servlet Caching question Hello, I wanted to know how Tomcat caches the output of Servlets/JSPs. Could someone direct me to where I could find some information on that? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
Shit! You're right!!! All the examples of uriworkermap.properties that I had seen had a relative path specified including the 3 books I looked at. It never occurred to me to specify the full url until your example. I just tried it that way and it works! Boy, do I feel stupid. You said the example is for jk2. Doesn't JK2 use workers2.properties instead of uirworkermap.properties and workers.properties? I'm using jk. I tried jk2, but didn't get it to work. jk is working fine for now. Back to the original question of why didn't I get more responses about this. Maybe indicating isapi/iis in the subject was too limiting. Maybe I should have said something about controlling access to webapps from multiple virtual hosts. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:55 AM Subject: Re: Logfile for isapi_redirector2.dll? I guess I misunderstood what uriworkermap.properties was doingI was under the impression that was where you mapped URIs to specific workers. In JK2 (mod_jk2.so), it might look something like: [uri:www.hostA.com/appA/*.jsp] There's no counterpart to that in an IIS + Tomcat configuration? I find that surprising. John Nathan Ward wrote: Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single Tomcat instance. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:47 AM Subject: Re: Logfile for isapi_redirector2.dll? uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
Just to be clear for others who may read this, here's an example of the uriworkermap.properties file that works for me: www.website1.com/rms-jobs/*=ajp13Worker www.website2.biz/rms/*=ajp13Worker What I had before that didn't control access as required was: /rms-jobs/*=ajp13Worker /rms/*=ajp13Worker Nathan - Original Message - From: Nathan Ward [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:05 PM Subject: Re: Logfile for isapi_redirector2.dll? Shit! You're right!!! All the examples of uriworkermap.properties that I had seen had a relative path specified including the 3 books I looked at. It never occurred to me to specify the full url until your example. I just tried it that way and it works! Boy, do I feel stupid. You said the example is for jk2. Doesn't JK2 use workers2.properties instead of uirworkermap.properties and workers.properties? I'm using jk. I tried jk2, but didn't get it to work. jk is working fine for now. Back to the original question of why didn't I get more responses about this. Maybe indicating isapi/iis in the subject was too limiting. Maybe I should have said something about controlling access to webapps from multiple virtual hosts. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:55 AM Subject: Re: Logfile for isapi_redirector2.dll? I guess I misunderstood what uriworkermap.properties was doingI was under the impression that was where you mapped URIs to specific workers. In JK2 (mod_jk2.so), it might look something like: [uri:www.hostA.com/appA/*.jsp] There's no counterpart to that in an IIS + Tomcat configuration? I find that surprising. John Nathan Ward wrote: Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single Tomcat instance. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:47 AM Subject: Re: Logfile for isapi_redirector2.dll? uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Servlet Caching question
Howdy, Actually, caching of servlet/JSP output is not a rare request, and is sometimes valid. Especially if there is a common set of request parameters (ViewPage?pageId=... where the pageId has three values that are very common). It would be fairly trivial to write a URL-based caching filter. One does not come with tomcat, but it's less than a 20 minutes effort to write I think. Yoav Shapira Millennium ChemInformatics -Original Message- From: Bodycombe, Andrew [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:06 PM To: 'Tomcat Users List' Subject: RE: Servlet Caching question Just one question: The output from a servlet/JSP is dynamic, so why would you want to cache the output? -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: 25 July 2003 18:03 To: 'Tomcat Users List' Subject: RE: Servlet Caching question Okay, So if I want to do some caching for say: GET requests. Is there a way to cache output based on URL? Is this kind of thing simply not supported, and I will have to go to some other application server. _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca -Original Message- From: Shapira, Yoav [mailto:[EMAIL PROTECTED] Sent: July 25, 2003 1:59 PM To: Tomcat Users List Subject: RE: Servlet Caching question Howdy, Basically, tomcat doesn't. Yoav Shapira Millennium ChemInformatics -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: Servlet Caching question Hello, I wanted to know how Tomcat caches the output of Servlets/JSPs. Could someone direct me to where I could find some information on that? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Logfile for isapi_redirector2.dll?
Nathan, I'd love to see the configuration but these urls don't seem to work. P.S. I wasn't thinking clearly when I suggested multiple workers2.properties files. Ken -Original Message- From: Nathan Ward [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:12 PM To: Tomcat Users List Subject: Re: Logfile for isapi_redirector2.dll? Just to be clear for others who may read this, here's an example of the uriworkermap.properties file that works for me: www.website1.com/rms-jobs/*=ajp13Worker www.website2.biz/rms/*=ajp13Worker What I had before that didn't control access as required was: /rms-jobs/*=ajp13Worker /rms/*=ajp13Worker Nathan - Original Message - From: Nathan Ward [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:05 PM Subject: Re: Logfile for isapi_redirector2.dll? Shit! You're right!!! All the examples of uriworkermap.properties that I had seen had a relative path specified including the 3 books I looked at. It never occurred to me to specify the full url until your example. I just tried it that way and it works! Boy, do I feel stupid. You said the example is for jk2. Doesn't JK2 use workers2.properties instead of uirworkermap.properties and workers.properties? I'm using jk. I tried jk2, but didn't get it to work. jk is working fine for now. Back to the original question of why didn't I get more responses about this. Maybe indicating isapi/iis in the subject was too limiting. Maybe I should have said something about controlling access to webapps from multiple virtual hosts. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:55 AM Subject: Re: Logfile for isapi_redirector2.dll? I guess I misunderstood what uriworkermap.properties was doingI was under the impression that was where you mapped URIs to specific workers. In JK2 (mod_jk2.so), it might look something like: [uri:www.hostA.com/appA/*.jsp] There's no counterpart to that in an IIS + Tomcat configuration? I find that surprising. John Nathan Ward wrote: Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single Tomcat instance. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:47 AM Subject: Re: Logfile for isapi_redirector2.dll? uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe,
RE: Servlet Caching question
Because I might decide that hmm, this page's content really doesn't change very often, so why don't I cache its results for 5 minutes? For example, one page might contain many different 'pagelets', say a little weather box with the current weather conditions. If your weather conditions are only updated every hour, why are you dynamically generating that little pagelet every request (which can be anywhere from 2 in an hour to several thousand). You'd cache that pagelet, and set it to expire every hour. -Original Message- From: Bodycombe, Andrew [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 12:06 PM To: 'Tomcat Users List' Subject: RE: Servlet Caching question Just one question: The output from a servlet/JSP is dynamic, so why would you want to cache the output? -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: 25 July 2003 18:03 To: 'Tomcat Users List' Subject: RE: Servlet Caching question Okay, So if I want to do some caching for say: GET requests. Is there a way to cache output based on URL? Is this kind of thing simply not supported, and I will have to go to some other application server. _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca -Original Message- From: Shapira, Yoav [mailto:[EMAIL PROTECTED] Sent: July 25, 2003 1:59 PM To: Tomcat Users List Subject: RE: Servlet Caching question Howdy, Basically, tomcat doesn't. Yoav Shapira Millennium ChemInformatics -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: Servlet Caching question Hello, I wanted to know how Tomcat caches the output of Servlets/JSPs. Could someone direct me to where I could find some information on that? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Logfile for isapi_redirector2.dll?
Boy I really am not thinking clearly! Thanks for the info. -Original Message- From: Januski, Ken [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:20 PM To: Tomcat Users List Subject: RE: Logfile for isapi_redirector2.dll? Nathan, I'd love to see the configuration but these urls don't seem to work. P.S. I wasn't thinking clearly when I suggested multiple workers2.properties files. Ken -Original Message- From: Nathan Ward [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:12 PM To: Tomcat Users List Subject: Re: Logfile for isapi_redirector2.dll? Just to be clear for others who may read this, here's an example of the uriworkermap.properties file that works for me: www.website1.com/rms-jobs/*=ajp13Worker www.website2.biz/rms/*=ajp13Worker What I had before that didn't control access as required was: /rms-jobs/*=ajp13Worker /rms/*=ajp13Worker Nathan - Original Message - From: Nathan Ward [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:05 PM Subject: Re: Logfile for isapi_redirector2.dll? Shit! You're right!!! All the examples of uriworkermap.properties that I had seen had a relative path specified including the 3 books I looked at. It never occurred to me to specify the full url until your example. I just tried it that way and it works! Boy, do I feel stupid. You said the example is for jk2. Doesn't JK2 use workers2.properties instead of uirworkermap.properties and workers.properties? I'm using jk. I tried jk2, but didn't get it to work. jk is working fine for now. Back to the original question of why didn't I get more responses about this. Maybe indicating isapi/iis in the subject was too limiting. Maybe I should have said something about controlling access to webapps from multiple virtual hosts. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:55 AM Subject: Re: Logfile for isapi_redirector2.dll? I guess I misunderstood what uriworkermap.properties was doingI was under the impression that was where you mapped URIs to specific workers. In JK2 (mod_jk2.so), it might look something like: [uri:www.hostA.com/appA/*.jsp] There's no counterpart to that in an IIS + Tomcat configuration? I find that surprising. John Nathan Ward wrote: Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single Tomcat instance. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:47 AM Subject: Re: Logfile for isapi_redirector2.dll? uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where the uriworkermap.properties is located. Each IIS website is configured in IIS's Management Application to use the ISAPI filter (isapi_redirector.dll) and a virtual directory is defined in IIS as well under each web site to the directory where the isapi_redirector.dll file is located. Since the mapping to webapps is controlled by the uriworkermap.properties file and only one can be specified in the registry settings, there is no way in IIS or via the ISAPI filter to control the access. This must not be a common thing at all as you said because I also checked three books on Tomcat. Professional Apache Tomcat was the closest to cover this at all but none of them specifically addressed this configuration. However, my customer wants to have one computer running IIS to be accessible to the Internet. So, that is what I have make it work with this configuration. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL
Tomcat as Windows service on Windows XP
How can i use tomcat as a windows service on XP ? I cant find any documentation about this in the tomcat documentation. Thanx. _ Hotmail snakker ditt språk! http://www.hotmail.msn.com/cgi-bin/sbox?rru=dasp/lang.asp - Få Hotmail på norsk i dag - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Servlet Caching question
That makes sense. I'd always considered that it was too dangerous to cache servlet output. I might try implementing this Filter and try to gain some performance... -Original Message- From: Shapira, Yoav [mailto:[EMAIL PROTECTED] Sent: 25 July 2003 18:17 To: Tomcat Users List Subject: RE: Servlet Caching question Howdy, Actually, caching of servlet/JSP output is not a rare request, and is sometimes valid. Especially if there is a common set of request parameters (ViewPage?pageId=... where the pageId has three values that are very common). It would be fairly trivial to write a URL-based caching filter. One does not come with tomcat, but it's less than a 20 minutes effort to write I think. Yoav Shapira Millennium ChemInformatics -Original Message- From: Bodycombe, Andrew [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:06 PM To: 'Tomcat Users List' Subject: RE: Servlet Caching question Just one question: The output from a servlet/JSP is dynamic, so why would you want to cache the output? -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: 25 July 2003 18:03 To: 'Tomcat Users List' Subject: RE: Servlet Caching question Okay, So if I want to do some caching for say: GET requests. Is there a way to cache output based on URL? Is this kind of thing simply not supported, and I will have to go to some other application server. _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca -Original Message- From: Shapira, Yoav [mailto:[EMAIL PROTECTED] Sent: July 25, 2003 1:59 PM To: Tomcat Users List Subject: RE: Servlet Caching question Howdy, Basically, tomcat doesn't. Yoav Shapira Millennium ChemInformatics -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: Servlet Caching question Hello, I wanted to know how Tomcat caches the output of Servlets/JSPs. Could someone direct me to where I could find some information on that? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Servlet Caching question
Andrew, Our JSP/Servlets perform some calculations based on some input from a HTML Form. These calculations are a little bit complicated so they take time to perform. However the output that they produce is relatively small. The majority of our users will give the same input, so the output is also known for those cases. If we can map the input given in the form of a GET request (i.e. the URL) to a cache of outputs, we could save a lot of time. So that is why we would like to cache the output. Another question I have is, once a Servlet is executed, does it get stored in memory so that it doesn't have to be read off the disc next time? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca -Original Message- From: Bodycombe, Andrew [mailto:[EMAIL PROTECTED] Sent: July 25, 2003 2:06 PM To: 'Tomcat Users List' Subject: RE: Servlet Caching question Just one question: The output from a servlet/JSP is dynamic, so why would you want to cache the output? -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: 25 July 2003 18:03 To: 'Tomcat Users List' Subject: RE: Servlet Caching question Okay, So if I want to do some caching for say: GET requests. Is there a way to cache output based on URL? Is this kind of thing simply not supported, and I will have to go to some other application server. _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca -Original Message- From: Shapira, Yoav [mailto:[EMAIL PROTECTED] Sent: July 25, 2003 1:59 PM To: Tomcat Users List Subject: RE: Servlet Caching question Howdy, Basically, tomcat doesn't. Yoav Shapira Millennium ChemInformatics -Original Message- From: Atreya Basu [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 12:42 PM To: [EMAIL PROTECTED] Subject: Servlet Caching question Hello, I wanted to know how Tomcat caches the output of Servlets/JSPs. Could someone direct me to where I could find some information on that? _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Tomcat: SSL client authentication
Hello all,
Sorry for the previous e-mail. %)
This theme was discussed about month ago. I tried to use what I've
found but I'm still having a problem...
I'm trying to do SSL client authentication with Tomcat 4.1.18 (clientAuth=true).
1. I've generated a client certificate using keytool:
keytool -genkey -alias tomcat-cl -keyalg RSA -keystore client.keystore
2. Then I created Certificate Signing Request:
keytool -certreq -keyalg RSA -alias tomcat-cl -file certreq.csr -keystore
client.keystore
3. I sent it to CA and got a signed certificate and CA Certificate.
4. I imported them to the client keystore:
keytool -import -alias root -keystore client.keystore -file cacert
keytool -import -alias tomcat-cl -keystore client.keystore -file usercert
5. I exported server certificate and imported it as a trusted to the
trusted keystore:
keytool -import -trustcacerts -alias tomcat -file server.cer -keystore trust.keystore
6. I imported CA Certificate to \jre\lib\security\cacerts :
keytool -import -file cacert -keystore %java_home%\jre\lib\security\cacerts
-storepass changeit
I'm running Tomcat and test client on the same machine.
Server keystore: %USERHOME%\.keystore
Client keystore: %USERHOME%\client.keystore
Client trusted keystore: %USERHOME%\trust.keystore
Test Client:
import java.net.*;
import java.io.*;
import java.util.*;
import java.security.*;
import javax.net.ssl.*;
public class SimpleClient {
public static void main(String[] args) {
System.setProperty(javax.net.ssl.trustStore,
System.getProperty(user.home)+File.separator +trust.keystore);
System.setProperty(javax.net.ssl.keyStore,
System.getProperty(user.home)+File.separator +client.keystore);
System.setProperty(javax.net.ssl.keyStorePassword, changeit);
InputStream is = null;
OutputStream os = new ByteArrayOutputStream();
try {
URL url = new URL(https://localhost:8443/readme.txt;);
try {
is = url.openStream();
byte[] buffer = new byte[4096];
int bytes_read;
while((bytes_read = is.read(buffer)) != -1)
os.write(buffer, 0, bytes_read);
System.out.println(os.toString());
} catch (Exception e) { e.printStackTrace(); }
finally {
try {
is.close();
os.close();
} catch (IOException e) { e.printStackTrace(); }
}
} catch (Exception e) { e.printStackTrace(); }
}
}
With [clientAuth=false] it works fine, but with [clientAuth=true]
it gives an error:
java.net.SocketException: Software caused connection abort: recv failed
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at com.sun.net.ssl.internal.ssl.InputRecord.a(DashoA6275)
at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA6275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA6275)
What did I do in a wrong way?
Thanks in advance.
Best regards,
Dmitry.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
RE: Servlet Caching question
Howdy, Our JSP/Servlets perform some calculations based on some input from a HTML Form. These calculations are a little bit complicated so they take time to perform. However the output that they produce is relatively small. The majority of our users will give the same input, so the output is also known for those cases. If we can map the input given in the form of a GET request (i.e. the URL) to a cache of outputs, we could save a lot of time. For this case, I would actually consider doing the pre-calculation and result caching in the calculator object or something hanging off of it, rather than the servlet output. That's because the output is small, so it's not like you're saving presentation/layout effort. Rather, you're trying to speed up business object creation. Another question I have is, once a Servlet is executed, does it get stored in memory so that it doesn't have to be read off the disc next time? This is a basic java question (or rather OS/JVM question). Once a class is loaded, it's kept in memory, in a special section of the memory allocated to the JVM (known as the Permanent Generation). However, the creation and destruction of servlet instances is up to the container, although those are in-memory operation. As an aside, the penalty for loading a class from disk is tiny and if that's your worst performance bottleneck, you should publish a paper about your application ;) Yoav Shapira This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: Tomcat as Windows service on Windows XP
I think that there is an option during the Windows installation to set Tomcat up as a service. The other option is to use: Sc.exe create The program is well documented so you shouldn't have any difficulty using it. Another option is to simply make an entry in the registry under: HKEY_LOCAL_MACHINE/SYSTEM/CurrentControSet/Services _ Atreya Basu Developer, Greenfield Research Inc. e-mail: atreya (at) greenfieldresearch (dot) ca -Original Message- From: Me myself [mailto:[EMAIL PROTECTED] Sent: July 25, 2003 2:26 PM To: [EMAIL PROTECTED] Subject: Tomcat as Windows service on Windows XP How can i use tomcat as a windows service on XP ? I cant find any documentation about this in the tomcat documentation. Thanx. _ Hotmail snakker ditt språk! http://www.hotmail.msn.com/cgi-bin/sbox?rru=dasp/lang.asp - Få Hotmail på norsk i dag - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: JDK for Linux on Power PC
http://www.blackdown.org although it is only for 1.3.1 --- Hari Om [EMAIL PROTECTED] wrote: where can I find JDK for Linux on Power PC _ STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] _ Are you a Techie? Get Your Free Tech Email Address Now! Visit http://www.TechEmail.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
Ken, That was an example configuration. I didn't realize that you'd care to go to the actual web sites. Some of the real uri's aren't accessible from the Internet. One of them is though. Go to http://www.usresources.com Click on the Candidates link menu item, then click on the OPPORTUNITIES or SUBMIT RESUME links at the bottom of the page. Those two links go to /rms-jobs/something which is my webapp running on Tomcat on a different machine. The pages before those links were static HTML files from IIS. Turns out that what I had tried per John's message isn't actually working. What I tried was: www.usresources.com/rms-jobs/*=ajp13Worker in the uriworkermap.properties file I thought that was working, but maybe I didn't restart IIS after making the change. I've since changed the file back to: /rms-jobs/*=ajp13Worker I also have the following in the uriworkermap.properties file: /rms/*=ajp13Worker However, this better not be accessible from www.usresources.com (i.e. http://www.usresources.com/rms/something) should never work. It is supposed to be accessed from another web site that isn't actually on the Internet yet because we have to get a SSL certificate from Verisign for it first. So, if I could specify: www.usresources.com/rms-jobs/*=ajp13Worker and www.another-to-be-determined-domainname.com/rms/*=ajp13Worker in uriworkermap.properties file I wouldn't need the valve that I created in Tomcat. Let me know if you need more clarification. Nathan - Original Message - From: Januski, Ken [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:20 PM Subject: RE: Logfile for isapi_redirector2.dll? Nathan, I'd love to see the configuration but these urls don't seem to work. P.S. I wasn't thinking clearly when I suggested multiple workers2.properties files. Ken -Original Message- From: Nathan Ward [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:12 PM To: Tomcat Users List Subject: Re: Logfile for isapi_redirector2.dll? Just to be clear for others who may read this, here's an example of the uriworkermap.properties file that works for me: www.website1.com/rms-jobs/*=ajp13Worker www.website2.biz/rms/*=ajp13Worker What I had before that didn't control access as required was: /rms-jobs/*=ajp13Worker /rms/*=ajp13Worker Nathan - Original Message - From: Nathan Ward [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:05 PM Subject: Re: Logfile for isapi_redirector2.dll? Shit! You're right!!! All the examples of uriworkermap.properties that I had seen had a relative path specified including the 3 books I looked at. It never occurred to me to specify the full url until your example. I just tried it that way and it works! Boy, do I feel stupid. You said the example is for jk2. Doesn't JK2 use workers2.properties instead of uirworkermap.properties and workers.properties? I'm using jk. I tried jk2, but didn't get it to work. jk is working fine for now. Back to the original question of why didn't I get more responses about this. Maybe indicating isapi/iis in the subject was too limiting. Maybe I should have said something about controlling access to webapps from multiple virtual hosts. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:55 AM Subject: Re: Logfile for isapi_redirector2.dll? I guess I misunderstood what uriworkermap.properties was doingI was under the impression that was where you mapped URIs to specific workers. In JK2 (mod_jk2.so), it might look something like: [uri:www.hostA.com/appA/*.jsp] There's no counterpart to that in an IIS + Tomcat configuration? I find that surprising. John Nathan Ward wrote: Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single Tomcat instance. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 10:47 AM Subject: Re: Logfile for isapi_redirector2.dll? uriworkermap.properties doesn't take a hostname? John Nathan Ward wrote: I believe that is the same thing I'm trying to do (did) with IIS and Tomcat. I don't believe it is a bug. It is just the way the isapi_redirector.dll is written. Windows registry settings specifies where _the_ workers.properties file is located as well as where
RE: Logfile for isapi_redirector2.dll?
Thanks, Nathan If I was awake I WOULDN'T have tried to go to your web site but instead would have realized that those weren't links but entries.:-) Who knows what I was thinking? But thanks for the explanation. It has been interesting following the discussion and has helped clarify a little bit the filtering process. I have my jk2 working right now as it should but it's always such a pain getting it setup that I tend to follow any discussions on it to see what I can learn. Ken -Original Message- From: Nathan Ward [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 2:03 PM To: Tomcat Users List Subject: Re: Logfile for isapi_redirector2.dll? Ken, That was an example configuration. I didn't realize that you'd care to go to the actual web sites. Some of the real uri's aren't accessible from the Internet. One of them is though. Go to http://www.usresources.com Click on the Candidates link menu item, then click on the OPPORTUNITIES or SUBMIT RESUME links at the bottom of the page. Those two links go to /rms-jobs/something which is my webapp running on Tomcat on a different machine. The pages before those links were static HTML files from IIS. Turns out that what I had tried per John's message isn't actually working. What I tried was: www.usresources.com/rms-jobs/*=ajp13Worker in the uriworkermap.properties file I thought that was working, but maybe I didn't restart IIS after making the change. I've since changed the file back to: /rms-jobs/*=ajp13Worker I also have the following in the uriworkermap.properties file: /rms/*=ajp13Worker However, this better not be accessible from www.usresources.com (i.e. http://www.usresources.com/rms/something) should never work. It is supposed to be accessed from another web site that isn't actually on the Internet yet because we have to get a SSL certificate from Verisign for it first. So, if I could specify: www.usresources.com/rms-jobs/*=ajp13Worker and www.another-to-be-determined-domainname.com/rms/*=ajp13Worker in uriworkermap.properties file I wouldn't need the valve that I created in Tomcat. Let me know if you need more clarification. Nathan - Original Message - From: Januski, Ken [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:20 PM Subject: RE: Logfile for isapi_redirector2.dll? Nathan, I'd love to see the configuration but these urls don't seem to work. P.S. I wasn't thinking clearly when I suggested multiple workers2.properties files. Ken -Original Message- From: Nathan Ward [mailto:[EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:12 PM To: Tomcat Users List Subject: Re: Logfile for isapi_redirector2.dll? Just to be clear for others who may read this, here's an example of the uriworkermap.properties file that works for me: www.website1.com/rms-jobs/*=ajp13Worker www.website2.biz/rms/*=ajp13Worker What I had before that didn't control access as required was: /rms-jobs/*=ajp13Worker /rms/*=ajp13Worker Nathan - Original Message - From: Nathan Ward [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 1:05 PM Subject: Re: Logfile for isapi_redirector2.dll? Shit! You're right!!! All the examples of uriworkermap.properties that I had seen had a relative path specified including the 3 books I looked at. It never occurred to me to specify the full url until your example. I just tried it that way and it works! Boy, do I feel stupid. You said the example is for jk2. Doesn't JK2 use workers2.properties instead of uirworkermap.properties and workers.properties? I'm using jk. I tried jk2, but didn't get it to work. jk is working fine for now. Back to the original question of why didn't I get more responses about this. Maybe indicating isapi/iis in the subject was too limiting. Maybe I should have said something about controlling access to webapps from multiple virtual hosts. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:55 AM Subject: Re: Logfile for isapi_redirector2.dll? I guess I misunderstood what uriworkermap.properties was doingI was under the impression that was where you mapped URIs to specific workers. In JK2 (mod_jk2.so), it might look something like: [uri:www.hostA.com/appA/*.jsp] There's no counterpart to that in an IIS + Tomcat configuration? I find that surprising. John Nathan Ward wrote: Sure, but that specifies the machine where Tomcat is running. I could specify different hosts for different workers if I want multiple instances of Tomcat running on different machines. I have one instance of Tomcat on one machine and one instance of IIS on another. However, two virtual hosts/web sites under IIS each of which need access to one and only one webapp on the single
Re: Logfile for isapi_redirector2.dll?
Sweet. I'm glad I was able to help. And yeah, you're probably right about the subject lines. Put IIS in the subject line, and the odds are real good that I'll read but not answer. Put nobody here bothered to answer me in your post and I'll definitely reply, even if I don't know the answer. LOL But I'm certainly not the only person here. John Nathan Ward wrote: Shit! You're right!!! All the examples of uriworkermap.properties that I had seen had a relative path specified including the 3 books I looked at. It never occurred to me to specify the full url until your example. I just tried it that way and it works! Boy, do I feel stupid. You said the example is for jk2. Doesn't JK2 use workers2.properties instead of uirworkermap.properties and workers.properties? I'm using jk. I tried jk2, but didn't get it to work. jk is working fine for now. Back to the original question of why didn't I get more responses about this. Maybe indicating isapi/iis in the subject was too limiting. Maybe I should have said something about controlling access to webapps from multiple virtual hosts. Nathan - Original Message - From: John Turner [EMAIL PROTECTED] To: Tomcat Users List [EMAIL PROTECTED] Sent: Friday, July 25, 2003 11:55 AM Subject: Re: Logfile for isapi_redirector2.dll? I guess I misunderstood what uriworkermap.properties was doingI was under the impression that was where you mapped URIs to specific workers. In JK2 (mod_jk2.so), it might look something like: [uri:www.hostA.com/appA/*.jsp] There's no counterpart to that in an IIS + Tomcat configuration? I find that surprising. John - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Logfile for isapi_redirector2.dll?
So its not working? I can't believe that IIS + Tomcat doesn't separate virtual hosts. Do your hosts have different appBase's? John Nathan Ward wrote: Ken, That was an example configuration. I didn't realize that you'd care to go to the actual web sites. Some of the real uri's aren't accessible from the Internet. One of them is though. Go to http://www.usresources.com Click on the Candidates link menu item, then click on the OPPORTUNITIES or SUBMIT RESUME links at the bottom of the page. Those two links go to /rms-jobs/something which is my webapp running on Tomcat on a different machine. The pages before those links were static HTML files from IIS. Turns out that what I had tried per John's message isn't actually working. What I tried was: www.usresources.com/rms-jobs/*=ajp13Worker in the uriworkermap.properties file I thought that was working, but maybe I didn't restart IIS after making the change. I've since changed the file back to: /rms-jobs/*=ajp13Worker I also have the following in the uriworkermap.properties file: /rms/*=ajp13Worker However, this better not be accessible from www.usresources.com (i.e. http://www.usresources.com/rms/something) should never work. It is supposed to be accessed from another web site that isn't actually on the Internet yet because we have to get a SSL certificate from Verisign for it first. So, if I could specify: www.usresources.com/rms-jobs/*=ajp13Worker and www.another-to-be-determined-domainname.com/rms/*=ajp13Worker in uriworkermap.properties file I wouldn't need the valve that I created in Tomcat. Let me know if you need more clarification. Nathan - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[OT] SF Bay Area Struts Intro (Free)
Hi everyone, I belong to the Silicon Valley Struts User Group and we're having a Intro to Struts presentation being done by a BEA employee. If you will be in the San Francisco Bay Area and interested in learning more about Struts, consider coming to this presentation. It's August 6th, and you can get more info here: http://www.baychi.org/bof/struts/20030806/ No product demo, just Intro into Struts. Thanks, Oscar Carrillo http://daydream.stanford.edu/tomcat/install_web_services.html - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
