date:20170217

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: apt (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1650729

Title:
  package apt 1.2.15ubuntu0.2 failed to install/upgrade: end of file on
  stdin at conffile prompt

Status in apt package in Ubuntu:
  Confirmed

Bug description:
  Error

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: apt 1.2.15ubuntu0.2
  ProcVersionSignature: Ubuntu 4.4.0-53.74-generic 4.4.30
  Uname: Linux 4.4.0-53-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.4
  Architecture: amd64
  Date: Sat Dec 17 11:51:35 2016
  ErrorMessage: end of file on stdin at conffile prompt
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.15ubuntu0.2
  SourcePackage: apt
  Title: package apt 1.2.15ubuntu0.2 failed to install/upgrade: end of file on 
stdin at conffile prompt
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1650729/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1587142] Re: Shutdown hangs in md kworker after "Reached target Shutdown."

2017-02-17 Thread Michael Cain

Confirming this same issue for me on a clean install of Ubuntu 16.04.2
X64 server on a HP 8300 Elite SFF pc.  Anything I can collect to
troubleshoot?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1587142

Title:
  Shutdown hangs in md kworker after "Reached target Shutdown."

Status in systemd package in Ubuntu:
  Confirmed

Bug description:
  I'm booting a fully patched 16.04 from an Intel Rapid Storage
  Technology enterprise RAID1 volume (ThinkServer TS140 with two SATA
  ST1000NM0033-9ZM drives, ext4 root partition, no LVM, UEFI mode).

  If the RAID volume is recovering or resyncing for whatever reason, then `sudo 
systemctl reboot` and `sudo systemctl poweroff` work fine (I had to `sudo 
systemctl --now disable lvm2-lvmetad lvm2-lvmpolld lvm2-monitor` in order to 
consistently get that). However, once the recovery/resync is complete and 
clean, the reboot and poweroff commands above hang forever after "Reached 
target Shutdown.". Note that issuing `sudo swapoff -a` beforehand (suggested in 
the bug #1464917) does not help.
  [EDIT]Actually, the shutdown also hangs from time to time during a resync. 
But I've never seen it succeed once the resync is complete.[/EDIT]

  Then, if the server has been forcibly restarted with the power button,
  the Intel Matrix Storage Manager indicates a "Normal" status for the
  RAID1 volume, but Ubuntu then resyncs the volume anyway:

  [1.223649] md: bind
  [1.228426] md: bind
  [1.230030] md: bind
  [1.230738] md: bind
  [1.232985] usbcore: registered new interface driver usbhid
  [1.233494] usbhid: USB HID core driver
  [1.234022] md: raid1 personality registered for level 1
  [1.234876] md/raid1:md126: not clean -- starting background reconstruction
  [1.234956] input: CHESEN USB Keyboard as 
/devices/pci:00/:00:14.0/usb3/3-10/3-10:1.0/0003:0A81:0101.0001/input/input5
  [1.236273] md/raid1:md126: active with 2 out of 2 mirrors
  [1.236797] md126: detected capacity change from 0 to 1000202043392
  [1.246271] md: md126 switched to read-write mode.
  [1.246834] md: resync of RAID array md126
  [1.247325] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
  [1.247503]  md126: p1 p2 p3 p4
  [1.248269] md: using maximum available idle IO bandwidth (but not more 
than 20 KB/sec) for resync.
  [1.248774] md: using 128k window, over a total of 976759940k.

  Note that the pain of "resync upon every (re)boot" cannot even be a
  bit relieved thanks to bitmaps because mdadm does not support them for
  IMSM containers:

  $ sudo mdadm --grow --bitmap=internal /dev/md126
  mdadm: Cannot add bitmaps to sub-arrays yet

  I also get this in syslog during boot when the individual drives are
  detected, but this seems to be harmless:

  May 30 17:26:07 wssrv1 systemd-udevd[608]: Process '/sbin/mdadm --incremental 
/dev/sdb --offroot' failed with exit code 1.
  May 30 17:26:07 wssrv1 systemd-udevd[608]: Process '/lib/udev/hdparm' failed 
with exit code 1.

  May 30 17:26:07 wssrv1 systemd-udevd[606]: Process '/sbin/mdadm --incremental 
/dev/sda --offroot' failed with exit code 1.
  May 30 17:26:07 wssrv1 systemd-udevd[606]: Process '/lib/udev/hdparm' failed 
with exit code 1.

  During a resync, `sudo sh -c 'echo idle >
  /sys/block/md126/md/sync_action'` actually stops it as expected, but
  it restarts immediately though nothing seems to have triggered it:

  May 30 18:17:02 wssrv1 kernel: [ 3106.826710] md: md126: resync interrupted.
  May 30 18:17:02 wssrv1 kernel: [ 3106.836320] md: checkpointing resync of 
md126.
  May 30 18:17:02 wssrv1 kernel: [ 3106.836623] md: resync of RAID array md126
  May 30 18:17:02 wssrv1 kernel: [ 3106.836625] md: minimum _guaranteed_  
speed: 1000 KB/sec/disk.
  May 30 18:17:02 wssrv1 kernel: [ 3106.836626] md: using maximum available 
idle IO bandwidth (but not more than 20 KB/sec) for resync.
  May 30 18:17:02 wssrv1 kernel: [ 3106.836627] md: using 128k window, over a 
total of 976759940k.
  May 30 18:17:02 wssrv1 kernel: [ 3106.836628] md: resuming resync of md126 
from checkpoint.
  May 30 18:17:02 wssrv1 mdadm[982]: RebuildStarted event detected on md device 
/dev/md/Volume0

  I attach screenshots of the hanging shutdown log after a `sudo sh -c 'echo 8 
> /proc/sys/kernel/printk'`. The second screenshot shows that the kernel has 
deadlocked in md_write_start(). Note that `sudo systemctl start debug-shell` is 
unusable on this machine at this point because Ctrl+Alt+F9 brings tty9 without 
any keyboard.
  [EDIT]But I can still switch back to tty1.[/EDIT]

  I have also tried with much lower values for vm.dirty_background_ratio
  and vm.dirty_ratio, but to no avail.

  Linux 4.6.0-040600-generic_4.6.0-040600.201605151930_amd64 from
  http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.6-yakkety/ did not
  help either.

  More information

[Touch-packages] [Bug 1307109] Re: Alcor Micro AU9540 keeps powering down when card is present

2017-02-17 Thread Chris McDonough

Similar output of ccid conformance as James' from a few years back.

** Attachment added: "output of src/parse from ccid-1.4.26"
   
https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1307109/+attachment/4821262/+files/output.txt

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pcsc-lite in Ubuntu.
https://bugs.launchpad.net/bugs/1307109

Title:
  Alcor Micro AU9540 keeps powering down when card is present

Status in pcsc-lite package in Ubuntu:
  Confirmed

Bug description:
  I have smart card reader built-into this laptop, however, whenever I
  insert a card - it'll read it for a few seconds, then the USB
  connection to the reader gets powered down and thus the card
  disappears in the systems eyes.

  After a few seconds, it comes back and everything's happy.

  Then the cycle repeats again and again and again.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-23-generic 3.13.0-23.45 [modified: 
boot/vmlinuz-3.13.0-23-generic]
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  jpds   3933 F pulseaudio
   /dev/snd/controlC0:  jpds   3933 F pulseaudio
  CurrentDesktop: Unity
  Date: Sun Apr  6 18:37:24 2014
  HibernationDevice: RESUME=UUID=05490d4c-6800-46a1-b5ba-8b32bdc57e89
  InstallationDate: Installed on 2014-04-06 (0 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Daily amd64 (20140406)
  MachineType: Hewlett-Packard HP EliteBook Folio 1040 G1
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-23-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-23-generic N/A
   linux-backports-modules-3.13.0-23-generic  N/A
   linux-firmware 1.127
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/09/2014
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: L83 Ver. 01.05
  dmi.board.name: 213E
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 24.2A
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrL83Ver.01.05:bd02/09/2014:svnHewlett-Packard:pnHPEliteBookFolio1040G1:pvrA3009DD18303:rvnHewlett-Packard:rn213E:rvrKBCVersion24.2A:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP EliteBook Folio 1040 G1
  dmi.product.version: A3009DD18303
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1307109/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665841] [NEW] Multiboot system is not functioning properly

2017-02-17 Thread cassidy

Public bug reported:

I was installing a 3rd and final OS and the power cut out.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40
Uname: Linux 4.4.0-62-generic x86_64
.tmp.unity_support_test.0:
 
ApportVersion: 2.20.1-0ubuntu2.5
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
Date: Fri Feb 17 20:14:28 2017
DistUpgraded: Fresh install
DistroCodename: xenial
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes
GraphicsCard:
 Intel Corporation 4th Gen Core Processor Integrated Graphics Controller 
[8086:0416] (rev 06) (prog-if 00 [VGA controller])
   Subsystem: Dell 4th Gen Core Processor Integrated Graphics Controller 
[1028:05bd]
InstallationDate: Installed on 2017-01-09 (39 days ago)
InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Release amd64 
(20160421)
MachineType: Dell Inc. Latitude E6440
ProcEnviron:
 PATH=(custom, no user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic 
root=UUID=ac479494-991b-4b1e-9c72-99438fd090e7 ro quiet splash vt.handoff=7
Renderer: Software
SourcePackage: xorg
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/01/2014
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A06
dmi.board.name: 0YX2X3
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 9
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvrA06:bd05/01/2014:svnDellInc.:pnLatitudeE6440:pvr01:rvnDellInc.:rn0YX2X3:rvrA00:cvnDellInc.:ct9:cvr:
dmi.product.name: Latitude E6440
dmi.product.version: 01
dmi.sys.vendor: Dell Inc.
version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.70-1~ubuntu16.04.1
version.libgl1-mesa-dri: libgl1-mesa-dri 12.0.6-0ubuntu0.16.04.1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 12.0.6-0ubuntu0.16.04.1
version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1.2
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug third-party-packages ubuntu xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1665841

Title:
  Multiboot system is not functioning properly

Status in xorg package in Ubuntu:
  New

Bug description:
  I was installing a 3rd and final OS and the power cut out.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40
  Uname: Linux 4.4.0-62-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2.5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  Date: Fri Feb 17 20:14:28 2017
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation 4th Gen Core Processor Integrated Graphics Controller 
[8086:0416] (rev 06) (prog-if 00 [VGA controller])
 Subsystem: Dell 4th Gen Core Processor Integrated Graphics Controller 
[1028:05bd]
  InstallationDate: Installed on 2017-01-09 (39 days ago)
  InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Release amd64 
(20160421)
  MachineType: Dell Inc. Latitude E6440
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic 
root=UUID=ac479494-991b-4b1e-9c72-99438fd090e7 ro quiet splash vt.handoff=7
  Renderer: Software
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/01/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A06
  dmi.board.name: 0YX2X3
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA06:bd05/01/2014:svnDellInc.:pnLatitudeE6440:pvr01:rvnDellInc.:rn0YX2X3:rvrA00:cvnDellInc.:ct9:cvr:
  dmi.product.name: Latitude E6440
  dmi.product.version: 01
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.70-1~ubuntu16.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 12.0.6-0ubuntu0.16.04.1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 12.0.6-0ubuntu0.16.04.1

[Touch-packages] [Bug 1659039] Re: iproute2 catch up with upstream

2017-02-17 Thread Bryan Quigley

Thanks a bunch Jon!  I see you landed 4.9.0-1ubuntu1 in Zesty.  Marking
Fix Released.



** Changed in: iproute2 (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iproute2 in Ubuntu.
https://bugs.launchpad.net/bugs/1659039

Title:
  iproute2 catch up with upstream

Status in iproute2 package in Ubuntu:
  Fix Released

Bug description:
  https://answers.launchpad.net/ubuntu/+source/iproute2/+question/445831

  also tons of bugfixes:
  http://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git/log/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/iproute2/+bug/1659039/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1592427] Re: I can't disable proposed updates

[Expired for software-properties (Ubuntu) because there has been no
activity for 60 days.]

** Changed in: software-properties (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to software-properties in
Ubuntu.
https://bugs.launchpad.net/bugs/1592427

Title:
  I can't disable proposed updates

Status in software-properties package in Ubuntu:
  Expired

Bug description:
  Hi!!

  Accidentally I've enabled proposed updates in development section but
  now I can't disable it. I've rebooted the laptop but the issue isn't
  fixed.

  
  Regards!!

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1592427/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1307109] Re: Alcor Micro AU9540 keeps powering down when card is present

2017-02-17 Thread Chris McDonough

I have the same problem, using pcscd 1.8.14-1ubuntu1.16.04.1 on an IBM
Thinkpad P50, which has the same card reader.

However, interestingly, it only happens when I use a Feitian/Entersafe
A22CR card.  I tried two of them with the same result, so it's not a
flaky card either.

When I use a PIVKey C910 card, it does not "flap" like it does with the
entersafe card.  The PIVKey card works fine in the reader.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pcsc-lite in Ubuntu.
https://bugs.launchpad.net/bugs/1307109

Title:
  Alcor Micro AU9540 keeps powering down when card is present

Status in pcsc-lite package in Ubuntu:
  Confirmed

Bug description:
  I have smart card reader built-into this laptop, however, whenever I
  insert a card - it'll read it for a few seconds, then the USB
  connection to the reader gets powered down and thus the card
  disappears in the systems eyes.

  After a few seconds, it comes back and everything's happy.

  Then the cycle repeats again and again and again.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-23-generic 3.13.0-23.45 [modified: 
boot/vmlinuz-3.13.0-23-generic]
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  jpds   3933 F pulseaudio
   /dev/snd/controlC0:  jpds   3933 F pulseaudio
  CurrentDesktop: Unity
  Date: Sun Apr  6 18:37:24 2014
  HibernationDevice: RESUME=UUID=05490d4c-6800-46a1-b5ba-8b32bdc57e89
  InstallationDate: Installed on 2014-04-06 (0 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Daily amd64 (20140406)
  MachineType: Hewlett-Packard HP EliteBook Folio 1040 G1
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-23-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-23-generic N/A
   linux-backports-modules-3.13.0-23-generic  N/A
   linux-firmware 1.127
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/09/2014
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: L83 Ver. 01.05
  dmi.board.name: 213E
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 24.2A
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrL83Ver.01.05:bd02/09/2014:svnHewlett-Packard:pnHPEliteBookFolio1040G1:pvrA3009DD18303:rvnHewlett-Packard:rn213E:rvrKBCVersion24.2A:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP EliteBook Folio 1040 G1
  dmi.product.version: A3009DD18303
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1307109/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1307109] Re: Alcor Micro AU9540 keeps powering down when card is present

2017-02-17 Thread Chris McDonough

I'll also note that the A22CR card works fine (does not exhibit the
flapping behavior) in an external Feitian reader.

Interestingly, the A22CR card + Alcor combibation doesn't "flap" under
Windows either when running opensc-tool in a loop.  Just under Linux.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pcsc-lite in Ubuntu.
https://bugs.launchpad.net/bugs/1307109

Title:
  Alcor Micro AU9540 keeps powering down when card is present

Status in pcsc-lite package in Ubuntu:
  Confirmed

Bug description:
  I have smart card reader built-into this laptop, however, whenever I
  insert a card - it'll read it for a few seconds, then the USB
  connection to the reader gets powered down and thus the card
  disappears in the systems eyes.

  After a few seconds, it comes back and everything's happy.

  Then the cycle repeats again and again and again.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-23-generic 3.13.0-23.45 [modified: 
boot/vmlinuz-3.13.0-23-generic]
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  jpds   3933 F pulseaudio
   /dev/snd/controlC0:  jpds   3933 F pulseaudio
  CurrentDesktop: Unity
  Date: Sun Apr  6 18:37:24 2014
  HibernationDevice: RESUME=UUID=05490d4c-6800-46a1-b5ba-8b32bdc57e89
  InstallationDate: Installed on 2014-04-06 (0 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Daily amd64 (20140406)
  MachineType: Hewlett-Packard HP EliteBook Folio 1040 G1
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-23-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-23-generic N/A
   linux-backports-modules-3.13.0-23-generic  N/A
   linux-firmware 1.127
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/09/2014
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: L83 Ver. 01.05
  dmi.board.name: 213E
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 24.2A
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrL83Ver.01.05:bd02/09/2014:svnHewlett-Packard:pnHPEliteBookFolio1040G1:pvrA3009DD18303:rvnHewlett-Packard:rn213E:rvrKBCVersion24.2A:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP EliteBook Folio 1040 G1
  dmi.product.version: A3009DD18303
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1307109/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1656155] Re: System (keyboard & touchpad) freezes

2017-02-17 Thread Jeffry R. Fisher

@V: Did you upgrade to 16.10, or did you do a fresh install? Check what
kernel version you ended up with. If less than 4.6, get a fresh install
image of 16.10 with kernel 4.8 (or else follow a recipe for upgrading
your kernel).

Avoid the bug by choosing a command line boot level (stay out of the
GUI) or using ssh to login from a different machine.

That's all I have. Being a user-space kind of guy, I'll defer to anyone
who overrides anything I've said.

I'm still rock-stable since achieving kernel 4.8. Somebody else might
have something to say about choosing the right install options. There
was a 3rd-party option that I said yes to, and it was associated with a
log message about Intel drivers later on.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to libdrm in Ubuntu.
https://bugs.launchpad.net/bugs/1656155

Title:
  System (keyboard & touchpad) freezes

Status in libdrm package in Ubuntu:
  Confirmed

Bug description:
  I have a 1-month old Acer Aspire F5-573-58VX that came with Win-10
  installed. It relies on its Intel i5-7200u for its graphics (HD 620).
  It runs Win-10 with no problems (other than Win-10 itself), so I do
  not suspect the hardware.

  I succeeded in dual-booting Ubuntu 16.04 with EFI and secure-boot both
  enabled, but was suffering random freezes at 3-30 minutes of use, even
  after setting the c-state limit in grub. It hangs both with and
  without Intel microcode. So I upgraded to 16.10 hoping that a newer
  kernel would have a fix in it.

  It's still freezing at random (many apps, and sometimes using only the
  desktop controls). It still has the c-state parameter in grub.

  It appears that if I leave the system untouched with the cursor in an
  empty area, then no freeze will occur (I can see display changing) as
  long as I don't touch anything. Bittorrent runs reliably overnight,
  and then the machine can freeze within seconds of my moving the cursor
  to a control in the morning.

  Thunderbird is also suspicious: I can work most of an hour OK as long
  as I never move the cursor over the scroll slider in the folder pane.
  However, bringing the cursor close enough to change the slider's
  appearance will usually freeze the machine. Update: I've now
  experienced a freeze while the cursor was stationary and I was merely
  typing into an email message window.

  When it freezes, the machine goes quiet (it's not spinning). There's
  no message to the GUI, only a sudden halt. When frozen, soft restart
  and reboot (ctrl-alt-back & ctrl-alt-del) both fail. Only a forced
  power-off has had any effect. (I'll try your alt+sysreq combos in my
  next freeze).

  Synaptic says I have an intel driver update utility installed, but I
  don't know if it has run. When I try to sudo it, I am told that the
  command is not found. I have been unable to locate it in the file
  system. If anyone knows where that goes (or where to hunt), that might
  be helpful.

  I do not (yet) know how to ssh into the sick machine to get kernel
  logs or crash dumps. I'm a user-space programmer, not a sysadmin, so I
  have a learning curve to open the firewall enough to allow an
  intrusion, and more learning curves for the cryptic debugging tools.

  var/log/kern.log has this:
  Jan 14 10:43:26 prop6 kernel: [1.002400] [drm:parse_csr_fw [i915_bpo]] 
*ERROR* Unknown stepping info, firmware loading failed
  Jan 14 10:43:26 prop6 kernel: [1.002405] i915_bpo :00:02.0: Failed to 
load DMC firmware 
[https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling 
runtime power management.
  Jan 14 10:43:26 prop6 kernel: [1.006089] vgaarb: device changed decodes: 
PCI::00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  Jan 14 10:43:26 prop6 kernel: [1.018209] ACPI: Video Device [GFX0] 
(multi-head: yes  rom: no  post: no)
  Jan 14 10:43:26 prop6 kernel: [1.018522] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
  Jan 14 10:43:26 prop6 kernel: [1.018601] [drm] Initialized i915_bpo 1.6.0 
20160229 for :00:02.0 on minor 0
  Jan 14 10:43:26 prop6 kernel: [1.064117] r8169 :03:00.1 enp3s0f1: 
renamed from eth0
  Jan 14 10:43:26 prop6 kernel: [1.142340] fbcon: inteldrmfb (fb0) is 
primary device
  Jan 14 10:43:26 prop6 kernel: [1.142437] Console: switching to colour 
frame buffer device 240x67
  Jan 14 10:43:26 prop6 kernel: [1.142466] i915_bpo :00:02.0: fb0: 
inteldrmfb frame buffer device

  My current work-around is to do as much work as possible in Win-10  :(

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/1656155/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1661371] Re: [zesty] doesn't offer a window to install missing gstreamer codecs

2017-02-17 Thread Pojar Gheorghe–Ioan

** Also affects: packagekit (Ubuntu)
   Importance: Undecided
   Status: New

** No longer affects: gst-plugins-base1.0 (Ubuntu)

** No longer affects: gst-plugins-base

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gst-plugins-base1.0 in
Ubuntu.
https://bugs.launchpad.net/bugs/1661371

Title:
  [zesty] doesn't offer a window to install missing gstreamer codecs

Status in packagekit package in Ubuntu:
  New

Bug description:
  Attempting to play a mp3 file with Rhythmbox on the latest Zesty daily
  build

  Rhythmbox opens but no playback start.
  On the terminal I got this:

  Rhythmbox-Message: Missing plugin: gstreamer|1.0|rhythmbox-metadata|MPEG-1 
Layer 3 (MP3) decoder|decoder-audio/mpeg, mpegversion=(int)1, 
mpegaudioversion=(int)1, layer=(int)3
  /usr/lib/python3/dist-packages/sessioninstaller/core.py:47: PyGIWarning: Gst 
was imported without specifying a version first. Use gi.require_version('Gst', 
'1.0') before import to ensure that the right version gets loaded.
from gi.repository import Gst
  /usr/lib/python3/dist-packages/sessioninstaller/core.py:48: PyGIWarning: Gtk 
was imported without specifying a version first. Use gi.require_version('Gtk', 
'3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk
  Falling back to package information
  Rhythmbox-Message: Missing plugins installed. Updating plugin registry ...

  But the wizard to install the missing codec actually fails to launch.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/packagekit/+bug/1661371/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV

2017-02-17 Thread Ryan Beisner

** Changed in: charm-test-infra
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python-crypto in Ubuntu.
https://bugs.launchpad.net/bugs/1665598

Title:
  python-crypto throws exception ValueError: CTR mode needs counter
  parameter, not IV

Status in OpenStack Charm Test Infra:
  Fix Released
Status in python-crypto package in Ubuntu:
  Fix Released

Bug description:
  We've recently upgraded python-crypto package on 14.04 due to this USN
  https://www.ubuntu.com/usn/usn-3199-1/

  
  apt history log

  ```
  Start-Date: 2017-02-16  23:43:48
  Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o 
DPkg::Options::=--force-confdef dist-upgrade
  Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13)
  End-Date: 2017-02-16  23:43:52
  ```

  Then our python script which uses paramiko failed with this exception

  ```
  Traceback (most recent call last):
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1583, in run
  self.kex_engine.parse_next(ptype, m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 68, in parse_next
  return self._parse_kexdh_reply(m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 107, in _parse_kexdh_reply
  self.transport._activate_outbound()
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1881, in _activate_outbound
  engine = self._get_cipher(self.local_cipher, key_out, IV_out)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1500, in _get_cipher
  return self._cipher_info[name]['class'].new(key, 
self._cipher_info[name]['mode'], iv, counter)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in 
new
  return AESCipher(key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in 
__init__
  blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 
141, in __init__
  self._cipher = factory.new(key, *args, **kwargs)
  ValueError: CTR mode needs counter parameter, not IV

  ```

  packages versions

  ```
  pycrypto==2.6.1
  paramiko==1.12.0
  ```

  which works okay BEFORE the upgrade.

  Maybe Debian bug report: https://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=850025

To manage notifications about this bug go to:
https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1551385] Re: No sound on ASUS Xonar DGX Soundcard (16.04)

2017-02-17 Thread Rob Glenn

I just completed a fresh install of Ubuntu 16.04 with a brand new Asus
Xonar DGX.  I can confirm the bug exists and also that the alsamixer
workaround is sticky across reboots.  While the current workaround is
much better than nothing, I' d like a way to have sound on both speakers
and headphones at once, the alsamixer solution appears to offer a one-
or-the-other switch but not both.  Anyone figure out a solution for
this?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1551385

Title:
  No sound on ASUS Xonar DGX Soundcard (16.04)

Status in pulseaudio package in Ubuntu:
  Expired

Bug description:
  Hello,
  On Ubuntu 16.04 LTS (Alpha), with the latest package updates (28/02/2015), 
Linux 4.4 and PulseAudio 8.0, I can't play any sound on my ASUS Xonar DGX. 
Tested with the app to test speakers, Firefox, VLC, and checked with 
pavucontrol, the progress bar indicate that a sound is played on the card, but 
no sound on the speakers.

  I report this bug because it works on the same version with the
  integrated card of my motherboard. (ASUS H87-PLUS)

  On Ubuntu 14.04 (PulseAudio 4.0), the sound work correctly (with all
  defaults params)

  The speakers connected are the Logitech Z9600 (by 3 jacks), and I
  precise that they are correctly plugged in, etc..., it works when I
  connect it to the integrated sound card of my motherboard (and if I
  use Ubuntu 14.04 LTS)

  I don't know if it's a normal development bug, but in doubt I report it.
  Thank you,
  Valentin Crône

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1551385/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1656155] Re: System (keyboard & touchpad) freezes

2017-02-17 Thread Viacheslav

I have fully the same situation with Lenovo v310-15 IKB and i5-7200u,
HD620 graphic on board. I had this bug on fresh installed Ubuntu 16.04.2
and 16.10

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to libdrm in Ubuntu.
https://bugs.launchpad.net/bugs/1656155

Title:
  System (keyboard & touchpad) freezes

Status in libdrm package in Ubuntu:
  Confirmed

Bug description:
  I have a 1-month old Acer Aspire F5-573-58VX that came with Win-10
  installed. It relies on its Intel i5-7200u for its graphics (HD 620).
  It runs Win-10 with no problems (other than Win-10 itself), so I do
  not suspect the hardware.

  I succeeded in dual-booting Ubuntu 16.04 with EFI and secure-boot both
  enabled, but was suffering random freezes at 3-30 minutes of use, even
  after setting the c-state limit in grub. It hangs both with and
  without Intel microcode. So I upgraded to 16.10 hoping that a newer
  kernel would have a fix in it.

  It's still freezing at random (many apps, and sometimes using only the
  desktop controls). It still has the c-state parameter in grub.

  It appears that if I leave the system untouched with the cursor in an
  empty area, then no freeze will occur (I can see display changing) as
  long as I don't touch anything. Bittorrent runs reliably overnight,
  and then the machine can freeze within seconds of my moving the cursor
  to a control in the morning.

  Thunderbird is also suspicious: I can work most of an hour OK as long
  as I never move the cursor over the scroll slider in the folder pane.
  However, bringing the cursor close enough to change the slider's
  appearance will usually freeze the machine. Update: I've now
  experienced a freeze while the cursor was stationary and I was merely
  typing into an email message window.

  When it freezes, the machine goes quiet (it's not spinning). There's
  no message to the GUI, only a sudden halt. When frozen, soft restart
  and reboot (ctrl-alt-back & ctrl-alt-del) both fail. Only a forced
  power-off has had any effect. (I'll try your alt+sysreq combos in my
  next freeze).

  Synaptic says I have an intel driver update utility installed, but I
  don't know if it has run. When I try to sudo it, I am told that the
  command is not found. I have been unable to locate it in the file
  system. If anyone knows where that goes (or where to hunt), that might
  be helpful.

  I do not (yet) know how to ssh into the sick machine to get kernel
  logs or crash dumps. I'm a user-space programmer, not a sysadmin, so I
  have a learning curve to open the firewall enough to allow an
  intrusion, and more learning curves for the cryptic debugging tools.

  var/log/kern.log has this:
  Jan 14 10:43:26 prop6 kernel: [1.002400] [drm:parse_csr_fw [i915_bpo]] 
*ERROR* Unknown stepping info, firmware loading failed
  Jan 14 10:43:26 prop6 kernel: [1.002405] i915_bpo :00:02.0: Failed to 
load DMC firmware 
[https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling 
runtime power management.
  Jan 14 10:43:26 prop6 kernel: [1.006089] vgaarb: device changed decodes: 
PCI::00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  Jan 14 10:43:26 prop6 kernel: [1.018209] ACPI: Video Device [GFX0] 
(multi-head: yes  rom: no  post: no)
  Jan 14 10:43:26 prop6 kernel: [1.018522] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
  Jan 14 10:43:26 prop6 kernel: [1.018601] [drm] Initialized i915_bpo 1.6.0 
20160229 for :00:02.0 on minor 0
  Jan 14 10:43:26 prop6 kernel: [1.064117] r8169 :03:00.1 enp3s0f1: 
renamed from eth0
  Jan 14 10:43:26 prop6 kernel: [1.142340] fbcon: inteldrmfb (fb0) is 
primary device
  Jan 14 10:43:26 prop6 kernel: [1.142437] Console: switching to colour 
frame buffer device 240x67
  Jan 14 10:43:26 prop6 kernel: [1.142466] i915_bpo :00:02.0: fb0: 
inteldrmfb frame buffer device

  My current work-around is to do as much work as possible in Win-10  :(

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/1656155/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1656155] Re: System (keyboard & touchpad) freezes

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: libdrm (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to libdrm in Ubuntu.
https://bugs.launchpad.net/bugs/1656155

Title:
  System (keyboard & touchpad) freezes

Status in libdrm package in Ubuntu:
  Confirmed

Bug description:
  I have a 1-month old Acer Aspire F5-573-58VX that came with Win-10
  installed. It relies on its Intel i5-7200u for its graphics (HD 620).
  It runs Win-10 with no problems (other than Win-10 itself), so I do
  not suspect the hardware.

  I succeeded in dual-booting Ubuntu 16.04 with EFI and secure-boot both
  enabled, but was suffering random freezes at 3-30 minutes of use, even
  after setting the c-state limit in grub. It hangs both with and
  without Intel microcode. So I upgraded to 16.10 hoping that a newer
  kernel would have a fix in it.

  It's still freezing at random (many apps, and sometimes using only the
  desktop controls). It still has the c-state parameter in grub.

  It appears that if I leave the system untouched with the cursor in an
  empty area, then no freeze will occur (I can see display changing) as
  long as I don't touch anything. Bittorrent runs reliably overnight,
  and then the machine can freeze within seconds of my moving the cursor
  to a control in the morning.

  Thunderbird is also suspicious: I can work most of an hour OK as long
  as I never move the cursor over the scroll slider in the folder pane.
  However, bringing the cursor close enough to change the slider's
  appearance will usually freeze the machine. Update: I've now
  experienced a freeze while the cursor was stationary and I was merely
  typing into an email message window.

  When it freezes, the machine goes quiet (it's not spinning). There's
  no message to the GUI, only a sudden halt. When frozen, soft restart
  and reboot (ctrl-alt-back & ctrl-alt-del) both fail. Only a forced
  power-off has had any effect. (I'll try your alt+sysreq combos in my
  next freeze).

  Synaptic says I have an intel driver update utility installed, but I
  don't know if it has run. When I try to sudo it, I am told that the
  command is not found. I have been unable to locate it in the file
  system. If anyone knows where that goes (or where to hunt), that might
  be helpful.

  I do not (yet) know how to ssh into the sick machine to get kernel
  logs or crash dumps. I'm a user-space programmer, not a sysadmin, so I
  have a learning curve to open the firewall enough to allow an
  intrusion, and more learning curves for the cryptic debugging tools.

  var/log/kern.log has this:
  Jan 14 10:43:26 prop6 kernel: [1.002400] [drm:parse_csr_fw [i915_bpo]] 
*ERROR* Unknown stepping info, firmware loading failed
  Jan 14 10:43:26 prop6 kernel: [1.002405] i915_bpo :00:02.0: Failed to 
load DMC firmware 
[https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling 
runtime power management.
  Jan 14 10:43:26 prop6 kernel: [1.006089] vgaarb: device changed decodes: 
PCI::00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  Jan 14 10:43:26 prop6 kernel: [1.018209] ACPI: Video Device [GFX0] 
(multi-head: yes  rom: no  post: no)
  Jan 14 10:43:26 prop6 kernel: [1.018522] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
  Jan 14 10:43:26 prop6 kernel: [1.018601] [drm] Initialized i915_bpo 1.6.0 
20160229 for :00:02.0 on minor 0
  Jan 14 10:43:26 prop6 kernel: [1.064117] r8169 :03:00.1 enp3s0f1: 
renamed from eth0
  Jan 14 10:43:26 prop6 kernel: [1.142340] fbcon: inteldrmfb (fb0) is 
primary device
  Jan 14 10:43:26 prop6 kernel: [1.142437] Console: switching to colour 
frame buffer device 240x67
  Jan 14 10:43:26 prop6 kernel: [1.142466] i915_bpo :00:02.0: fb0: 
inteldrmfb frame buffer device

  My current work-around is to do as much work as possible in Win-10  :(

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libdrm/+bug/1656155/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665813] [NEW] /usr/bin/qv4l2:11:qt_memconvert:qt_rectconvert:convert_qrgb888_to_quint32:QImage::convertToFormat:QRasterPixmapData::createPixmapForImage

2017-02-17 Thread errors.ubuntu.com bug bridge

Public bug reported:

The Ubuntu Error Tracker has been receiving reports about a problem regarding 
v4l-utils.  This problem was most recently seen with package version 1.10.0-1, 
the problem page at 
https://errors.ubuntu.com/problem/4fd7e9cc94e231cee5b86e8e8c16e994678b8590 
contains more details, including versions of packages affected, stacktrace or 
traceback, and individual crash reports.
If you do not have access to the Ubuntu Error Tracker you can request it at 
http://forms.canonical.com/reports/.

** Affects: v4l-utils (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to v4l-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1665813

Title:
  
/usr/bin/qv4l2:11:qt_memconvert:qt_rectconvert:convert_qrgb888_to_quint32:QImage::convertToFormat:QRasterPixmapData::createPixmapForImage

Status in v4l-utils package in Ubuntu:
  New

Bug description:
  The Ubuntu Error Tracker has been receiving reports about a problem regarding 
v4l-utils.  This problem was most recently seen with package version 1.10.0-1, 
the problem page at 
https://errors.ubuntu.com/problem/4fd7e9cc94e231cee5b86e8e8c16e994678b8590 
contains more details, including versions of packages affected, stacktrace or 
traceback, and individual crash reports.
  If you do not have access to the Ubuntu Error Tracker you can request it at 
http://forms.canonical.com/reports/.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/v4l-utils/+bug/1665813/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1663345] Re: 10-15 seconds delay until host is resolved

2017-02-17 Thread Null_Sieben

Should I remove bind9-host?

$ sudo apt-get remove bin

bind9-host  binfmt-support  binutils


Seems there is running something!?!?


$ dig

; <<>> DiG 9.10.3-P4-Ubuntu <<>>
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 23674
;; flags: qr rd ra ad; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 1

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 512
;; QUESTION SECTION:
;.  IN  NS

;; ANSWER SECTION:
.   163729  IN  NS  g.root-servers.net.
.   163729  IN  NS  f.root-servers.net.
.   163729  IN  NS  b.root-servers.net.
.   163729  IN  NS  i.root-servers.net.
.   163729  IN  NS  a.root-servers.net.
.   163729  IN  NS  j.root-servers.net.
.   163729  IN  NS  k.root-servers.net.
.   163729  IN  NS  c.root-servers.net.
.   163729  IN  NS  m.root-servers.net.
.   163729  IN  NS  e.root-servers.net.
.   163729  IN  NS  h.root-servers.net.
.   163729  IN  NS  d.root-servers.net.
.   163729  IN  NS  l.root-servers.net.

;; Query time: 26 msec
;; SERVER: 127.0.1.1#53(127.0.1.1)
;; WHEN: Sat Feb 18 00:46:46 CET 2017
;; MSG SIZE  rcvd: 239


$ dig -x 127.0.0.1

; <<>> DiG 9.10.3-P4-Ubuntu <<>> -x 127.0.0.1
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 13593
;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 512
;; QUESTION SECTION:
;1.0.0.127.in-addr.arpa.IN  PTR

;; AUTHORITY SECTION:
in-addr.arpa.   3490IN  SOA b.in-addr-servers.arpa. 
nstld.iana.org. 2016110952 1800 900 604800 3600

;; Query time: 29 msec
;; SERVER: 127.0.1.1#53(127.0.1.1)
;; WHEN: Sat Feb 18 00:48:18 CET 2017
;; MSG SIZE  rcvd: 119

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to resolvconf in Ubuntu.
https://bugs.launchpad.net/bugs/1663345

Title:
  10-15 seconds delay until host is resolved

Status in resolvconf package in Ubuntu:
  Incomplete

Bug description:
  I have the problem that every new DNS query takes about 10 - 15
  seconds.

  This is the first time I used "ubuntu-bug resolvconf". Hopefully all
  information of my system are attached to this report.

  Thanks for help or hints:)

  ProblemType: Bug
  DistroRelease: Ubuntu 16.10
  Package: resolvconf 1.79ubuntu1
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Uname: Linux 4.8.0-37-generic x86_64
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Thu Feb  9 19:36:34 2017
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2017-01-22 (18 days ago)
  InstallationMedia: Ubuntu 16.10 "Yakkety Yak" - Release amd64 (20161012.2)
  PackageArchitecture: all
  SourcePackage: resolvconf
  UpgradeStatus: No upgrade log present (probably fresh install)
  modified.conffile..etc.resolvconf.resolv.conf.d.head:
   # Dynamic resolv.conf(5) file for glibc resolver(3) generated by 
resolvconf(8)
   # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
   nameserver 127.0.0.1
  mtime.conffile..etc.resolvconf.resolv.conf.d.head: 2017-02-09T18:49:48.934789

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/resolvconf/+bug/1663345/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV

2017-02-17 Thread Phill

Sorry, I commented on the wrong bug, I think #1665643 may be a duplicate
or dependency on this.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python-crypto in Ubuntu.
https://bugs.launchpad.net/bugs/1665598

Title:
  python-crypto throws exception ValueError: CTR mode needs counter
  parameter, not IV

Status in OpenStack Charm Test Infra:
  Confirmed
Status in python-crypto package in Ubuntu:
  Fix Released

Bug description:
  We've recently upgraded python-crypto package on 14.04 due to this USN
  https://www.ubuntu.com/usn/usn-3199-1/

  
  apt history log

  ```
  Start-Date: 2017-02-16  23:43:48
  Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o 
DPkg::Options::=--force-confdef dist-upgrade
  Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13)
  End-Date: 2017-02-16  23:43:52
  ```

  Then our python script which uses paramiko failed with this exception

  ```
  Traceback (most recent call last):
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1583, in run
  self.kex_engine.parse_next(ptype, m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 68, in parse_next
  return self._parse_kexdh_reply(m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 107, in _parse_kexdh_reply
  self.transport._activate_outbound()
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1881, in _activate_outbound
  engine = self._get_cipher(self.local_cipher, key_out, IV_out)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1500, in _get_cipher
  return self._cipher_info[name]['class'].new(key, 
self._cipher_info[name]['mode'], iv, counter)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in 
new
  return AESCipher(key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in 
__init__
  blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 
141, in __init__
  self._cipher = factory.new(key, *args, **kwargs)
  ValueError: CTR mode needs counter parameter, not IV

  ```

  packages versions

  ```
  pycrypto==2.6.1
  paramiko==1.12.0
  ```

  which works okay BEFORE the upgrade.

  Maybe Debian bug report: https://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=850025

To manage notifications about this bug go to:
https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV

2017-02-17 Thread Phill

Possible duplicate of #1665598 or maybe just a dependency, depends on
point of view.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python-crypto in Ubuntu.
https://bugs.launchpad.net/bugs/1665598

Title:
  python-crypto throws exception ValueError: CTR mode needs counter
  parameter, not IV

Status in OpenStack Charm Test Infra:
  Confirmed
Status in python-crypto package in Ubuntu:
  Fix Released

Bug description:
  We've recently upgraded python-crypto package on 14.04 due to this USN
  https://www.ubuntu.com/usn/usn-3199-1/

  
  apt history log

  ```
  Start-Date: 2017-02-16  23:43:48
  Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o 
DPkg::Options::=--force-confdef dist-upgrade
  Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13)
  End-Date: 2017-02-16  23:43:52
  ```

  Then our python script which uses paramiko failed with this exception

  ```
  Traceback (most recent call last):
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1583, in run
  self.kex_engine.parse_next(ptype, m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 68, in parse_next
  return self._parse_kexdh_reply(m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 107, in _parse_kexdh_reply
  self.transport._activate_outbound()
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1881, in _activate_outbound
  engine = self._get_cipher(self.local_cipher, key_out, IV_out)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1500, in _get_cipher
  return self._cipher_info[name]['class'].new(key, 
self._cipher_info[name]['mode'], iv, counter)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in 
new
  return AESCipher(key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in 
__init__
  blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 
141, in __init__
  self._cipher = factory.new(key, *args, **kwargs)
  ValueError: CTR mode needs counter parameter, not IV

  ```

  packages versions

  ```
  pycrypto==2.6.1
  paramiko==1.12.0
  ```

  which works okay BEFORE the upgrade.

  Maybe Debian bug report: https://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=850025

To manage notifications about this bug go to:
https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665795] Re: apport-gtk crashes when removing app from unity launcher by dragging

2017-02-17 Thread comptastic

The duplicate "cannot be found".

** This bug is no longer a duplicate of private bug 1552577

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1665795

Title:
  apport-gtk crashes when removing app from unity launcher by dragging

Status in apport package in Ubuntu:
  New

Bug description:
  Removal using Unlock from Launcher option in menu failed first, so
  then I tried dragging to remove which resulted in the crash.

  ProblemType: Crash
  DistroRelease: Ubuntu 17.04
  Package: apport-gtk 2.20.4-0ubuntu2
  ProcVersionSignature: Ubuntu 4.10.0-5.7+IntelAtom-linuxium 4.10.0-rc6
  Uname: Linux 4.10.0-5-linuxium x86_64
  ApportVersion: 2.20.4-0ubuntu2
  Architecture: amd64
  CurrentDesktop: Unity:Unity7
  Date: Fri Feb 17 17:17:50 2017
  ExecutablePath: /usr/share/apport/apport-gtk
  InstallationDate: Installed on 2017-02-17 (0 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" Linuxium - Alpha  (20170127)
  InterpreterPath: /usr/bin/python3.5
  PackageArchitecture: all
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gtk
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SegvAnalysis:
   Segfault happened at: 0x7f4d82635889:mov(%rbx),%rdi
   PC (0x7f4d82635889) ok
   source "(%rbx)" (0x) not located in a known VMA region (needed 
readable region)!
   destination "%rdi" ok
  SegvReason: reading NULL VMA
  Signal: 11
  SourcePackage: apport
  StacktraceTop:
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
  Title: apport-gtk crashed with SIGSEGV
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1665795/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1661153] Re: package python-crypto 2.6.1-6build1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

2017-02-17 Thread Sebastian Ramacher

** Package changed: python-crypto (Ubuntu) => mysql-5.7 (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python-crypto in Ubuntu.
https://bugs.launchpad.net/bugs/1661153

Title:
  package python-crypto 2.6.1-6build1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

Status in mysql-5.7 package in Ubuntu:
  New

Bug description:
  I am unable to install mysql related any package.

  If are sure you want to downgrade to 5.7, remove the file
  /var/lib/mysql/debian-*.flag and try installing again.
  dpkg: error processing archive 
/var/cache/apt/archives/mysql-server-5.7_5.7.14-1+deb.sury.org~trusty+0_amd64.deb
 (--unpack):
   subprocess new pre-installation script returned error exit status 1
  Errors were encountered while processing:
   
/var/cache/apt/archives/mysql-server-5.7_5.7.14-1+deb.sury.org~trusty+0_amd64.deb
  E: Sub-process /usr/bin/dpkg returned an error code (1)

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: python-crypto 2.6.1-6build1
  ProcVersionSignature: Ubuntu 4.4.0-59.80-generic 4.4.35
  Uname: Linux 4.4.0-59-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.5
  Architecture: amd64
  Date: Thu Feb  2 10:05:50 2017
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 1
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.19
  SourcePackage: python-crypto
  Title: package python-crypto 2.6.1-6build1 failed to install/upgrade: 
subprocess installed post-installation script returned error exit status 1
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mysql-5.7/+bug/1661153/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Touch-packages] [Bug 1660633] Re: /usr/bin/ucfr: line ... : [: : integer expression expected

2017-02-17 Thread Steve Langasek

On Fri, Feb 17, 2017 at 10:11:51PM -, Manfred Hampl wrote:
> Meanwhile in
> https://answers.launchpad.net/ubuntu/+source/ucf/+question/448737 we
> identified two areas where the ucfr script misbehaved in the environment
> of the original poster.

> The following workarounds helped:

> Change all occurrences of $" into "'$'
> Change all occurrences of egrep into grep -E

> Even if we do not know why the ucfr script failed in the original
> poster's environment, these modifications might be worth being
> considered for future versions of the ucfr script.

Except the fact that these changes helped point to a fundamentally broken
install, not a bug in ucfr.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ucf in Ubuntu.
https://bugs.launchpad.net/bugs/1660633

Title:
  /usr/bin/ucfr: line ... : [: : integer expression expected

Status in ucf package in Ubuntu:
  Incomplete

Bug description:
  I've had a reoccurring issue: 
https://ubuntuforums.org/showthread.php?t=2350682
  Running: ucf_3.0036_all.deb

  
http://askubuntu.com/questions/875415/usr-bin-ucfr-errors-integer-expression-expected
  
http://serverfault.com/questions/827873/grub-pc-update-fail-dev-sda-ext2-doesnt-support-embedding

  I don't know why ucfr is erroring out but the accumulated errors are
  now enough to stall priority packages which I feel hamstrung about.
  I've reinstalled the ucf package and danced around the issue enough.

  Any maintainers have a shot in the dark for why this would be
  happening?

  Discussion:
  https://answers.launchpad.net/ubuntu/+source/ucf/+question/448737

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ucf/+bug/1660633/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665795] Re: apport-gtk crashes when removing app from unity launcher by dragging

*** This bug is a duplicate of bug 1552577 ***
https://bugs.launchpad.net/bugs/1552577

Thank you for taking the time to report this crash and helping to make
this software better.  This particular crash has already been reported
and is a duplicate of bug #1552577, so is being marked as such.  Please
look at the other bug report to see if there is any missing information
that you can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** Attachment removed: "CoreDump.gz"
   
https://bugs.launchpad.net/bugs/1665795/+attachment/4821066/+files/CoreDump.gz

** Attachment removed: "Disassembly.txt"
   
https://bugs.launchpad.net/bugs/1665795/+attachment/4821069/+files/Disassembly.txt

** Attachment removed: "ProcMaps.txt"
   
https://bugs.launchpad.net/bugs/1665795/+attachment/4821071/+files/ProcMaps.txt

** Attachment removed: "ProcStatus.txt"
   
https://bugs.launchpad.net/bugs/1665795/+attachment/4821072/+files/ProcStatus.txt

** Attachment removed: "Registers.txt"
   
https://bugs.launchpad.net/bugs/1665795/+attachment/4821073/+files/Registers.txt

** Attachment removed: "Stacktrace.txt"
   
https://bugs.launchpad.net/bugs/1665795/+attachment/4821074/+files/Stacktrace.txt

** Attachment removed: "ThreadStacktrace.txt"
   
https://bugs.launchpad.net/bugs/1665795/+attachment/4821075/+files/ThreadStacktrace.txt

** This bug has been marked a duplicate of private bug 1552577

** Information type changed from Private to Public

** Tags removed: need-amd64-retrace

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1665795

Title:
  apport-gtk crashes when removing app from unity launcher by dragging

Status in apport package in Ubuntu:
  New

Bug description:
  Removal using Unlock from Launcher option in menu failed first, so
  then I tried dragging to remove which resulted in the crash.

  ProblemType: Crash
  DistroRelease: Ubuntu 17.04
  Package: apport-gtk 2.20.4-0ubuntu2
  ProcVersionSignature: Ubuntu 4.10.0-5.7+IntelAtom-linuxium 4.10.0-rc6
  Uname: Linux 4.10.0-5-linuxium x86_64
  ApportVersion: 2.20.4-0ubuntu2
  Architecture: amd64
  CurrentDesktop: Unity:Unity7
  Date: Fri Feb 17 17:17:50 2017
  ExecutablePath: /usr/share/apport/apport-gtk
  InstallationDate: Installed on 2017-02-17 (0 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" Linuxium - Alpha  (20170127)
  InterpreterPath: /usr/bin/python3.5
  PackageArchitecture: all
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gtk
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SegvAnalysis:
   Segfault happened at: 0x7f4d82635889:mov(%rbx),%rdi
   PC (0x7f4d82635889) ok
   source "(%rbx)" (0x) not located in a known VMA region (needed 
readable region)!
   destination "%rdi" ok
  SegvReason: reading NULL VMA
  Signal: 11
  SourcePackage: apport
  StacktraceTop:
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
  Title: apport-gtk crashed with SIGSEGV
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1665795/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665796] [NEW] multi-display layout corrupt after reboot or log out/in

2017-02-17 Thread John Wilson

Public bug reported:

Every time I reboot or log out and back in again, The layout of the displays is 
incorrect.
Correcting the layout is a bit 'hit and miss' as the changed layout is not 
always applied correctly.

There was a massive improvement after upgrading to 16.04 from 14.04.
Previously, the upper display did not render pixels consistently. The
upgrade corrected this.

The upper display (29") is connected to the NVIDIA Corporation GK107
[GeForce GT 740] display card and the lower display (23") is connected
to the on-board Intel Integrated Graphics Controller.

I hope this information is useful. Thanks for your efforts...

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40
Uname: Linux 4.4.0-62-generic x86_64
.tmp.unity_support_test.0:
 
ApportVersion: 2.20.1-0ubuntu2.5
Architecture: amd64
CompizPlugins: 
[core,composite,opengl,decor,move,regex,resize,mousepoll,animation,wall,place,compiztoolbox,grid,gnomecompat,fade,workarounds,vpswitch,snap,imgpng,scale,session,expo,ezoom,switcher]
CompositorRunning: None
CurrentDesktop: GNOME-Flashback:Unity
Date: Fri Feb 17 21:59:43 2017
DistUpgraded: Fresh install
DistroCodename: xenial
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes, if not too technical
GraphicsCard:
 Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0122] (rev 09) (prog-if 00 [VGA controller])
   Subsystem: Gigabyte Technology Co., Ltd 2nd Generation Core Processor Family 
Integrated Graphics Controller [1458:d000]
 NVIDIA Corporation GK107 [GeForce GT 740] [10de:0fc8] (rev a1) (prog-if 00 
[VGA controller])
   Subsystem: Palit Microsystems Inc. GK107 [GeForce GT 740] [1569:0fc8]
InstallationDate: Installed on 2014-05-28 (995 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
MachineType: Gigabyte Technology Co., Ltd. Z68XP-UD3P
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic 
root=UUID=71be335b-0f03-461d-b458-0b40a18be8ab ro quiet splash 
crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M 
crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M 
crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M 
crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M 
crashkernel=384M-:128M crashkernel=384M-:128M crashkernel=384M-:128M 
vt.handoff=7
SourcePackage: xorg
Symptom: display
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 09/01/2011
dmi.bios.vendor: Award Software International, Inc.
dmi.bios.version: F5
dmi.board.name: Z68XP-UD3P
dmi.board.vendor: Gigabyte Technology Co., Ltd.
dmi.board.version: x.x
dmi.chassis.type: 3
dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF5:bd09/01/2011:svnGigabyteTechnologyCo.,Ltd.:pnZ68XP-UD3P:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnZ68XP-UD3P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
dmi.product.name: Z68XP-UD3P
dmi.sys.vendor: Gigabyte Technology Co., Ltd.
version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.70-1~ubuntu16.04.1
version.libgl1-mesa-dri: libgl1-mesa-dri 12.0.6-0ubuntu0.16.04.1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 12.0.6-0ubuntu0.16.04.1
version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1.2
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2
xserver.bootTime: Fri Feb 17 21:25:03 2017
xserver.configfile: default
xserver.devices:
 inputPower Button KEYBOARD, id 6
 inputPower Button KEYBOARD, id 7
 inputTelink Wireless Receiver KEYBOARD, id 8
 inputTelink Wireless Receiver KEYBOARD, id 9
 inputAT Translated Set 2 keyboard KEYBOARD, id 10
xserver.errors:
 Failed to load module "nvidia" (module does not exist, 0)
 Failed to load module "nvidia" (module does not exist, 0)
 NOUVEAU(G0): [XvMC] Failed to initialize extension.
xserver.logfile: /var/log/Xorg.0.log
xserver.version: 2:1.18.4-0ubuntu0.2

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug ubuntu xenial

** Attachment added: "Screenshots showing correct and wrong layouts"
   
https://bugs.launchpad.net/bugs/1665796/+attachment/4821076/+files/Screenshots.png

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1665796

Title:
  multi-display layout corrupt after reboot or log out/in

Status in xorg package in Ubuntu:
  New

Bug description:
  Every

[Touch-packages] [Bug 1637333] Re: gnome-terminal crashes when tab is dragged onto another tab's terminal area

Exact same issue with 3.20.2-1ubuntu5 on Ubuntu 16.10 amd64. Do you want
an `apport-collect` from me?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1637333

Title:
  gnome-terminal crashes when tab is dragged onto another tab's terminal
  area

Status in GNOME Terminal:
  Confirmed
Status in GTK+:
  Confirmed
Status in gnome-terminal package in Ubuntu:
  Confirmed
Status in gtk+3.0 package in Ubuntu:
  Confirmed

Bug description:
  This bug occurs when I drag an existing terminal tab out of the tab
  bar and drop it onto the text area of the open terminal. Usually
  occurs by accident, to be honest (when I don't mean to drag the tab at
  all, for instance) but it's 100% reproducible intentionally.

  I found several old bug reports on similar issues, but they were
  either not detailed enough to figure out if they were exactly the same
  or were closed as duplicates of a bug that no longer exists
  (https://bugs.launchpad.net/ubuntu/+source/gnome-
  terminal/+bug/1442826).

  Apport generated a report (title: gnome-terminal-server crashed with
  SIGABRT in g_assertion_message()) for me and then helpfully explained
  that the bug had already been filed. It redirected me to a bug that
  doesn't exist (https://bugs.launchpad.net/bugs/1595907) though, so I'm
  refiling it here.

  1. Ubuntu release:
  spyro@julep:~$ lsb_release -rd
  Description:  Ubuntu 16.04.1 LTS
  Release:  16.04

  2. Package version:
  spyro@julep:~$ apt-cache policy gnome-terminal
  gnome-terminal:
Installed: 3.20.2-1ubuntu3~ubuntu16.04.1
Candidate: 3.20.2-1ubuntu3~ubuntu16.04.1
Version table:
   *** 3.20.2-1ubuntu3~ubuntu16.04.1 500
  500 http://ppa.launchpad.net/gnome3-team/gnome3-staging/ubuntu 
xenial/main amd64 Packages
  100 /var/lib/dpkg/status
   3.18.3-1ubuntu1 500
  500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 Packages
  spyro@julep:~$ 

  3. Expected behavior: Tab should split into a new window (as it does
  if you drop it onto someplace that's not a gnome-terminal window). At
  the worst, it should go back to where it was on the tab bar instead of
  crashing.

  4. Actual behavior: The whole gnome-terminal window crashes, losing
  any activity or work on other tabs. Other open gnome-terminal windows
  also crash and close.

  From /var/log/syslog:
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
(gnome-terminal-server:30721): G
  Lib-GObject-CRITICAL **: g_object_ref: assertion 'G_IS_OBJECT (object)' failed
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
(gnome-terminal-server:30721): G
  tk-CRITICAL **: gtk_container_get_focus_child: assertion 'GTK_IS_CONTAINER 
(cont
  ainer)' failed
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
(gnome-terminal-server:30721): G
  Lib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' 
failed
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
(gnome-terminal-server:30721): G
  tk-CRITICAL **: gtk_container_get_focus_child: assertion 'GTK_IS_CONTAINER 
(cont
  ainer)' failed
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: **
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
Gtk:ERROR:/build/gtk+3.0-j0Vp0u/
  gtk+3.0-3.20.8/./gtk/gtkwidget.c:5830:gtk_widget_get_frame_clock: assertion 
fail
  ed: (window != NULL)
  Oct 27 14:54:06 julep /usr/lib/gdm3/gdm-x-session[2197]: Activating service 
name
  ='org.gnome.Contacts.SearchProvider'
  Oct 27 14:54:06 julep /usr/lib/gdm3/gdm-x-session[2197]: Activating service 
name
  ='org.gnome.Documents'
  Oct 27 14:54:06 julep /usr/lib/gdm3/gdm-x-session[2197]: Activating service 
name
  ='org.gnome.Nautilus'

  I've also saved the apport-generated crash report if that would be
  helpful to upload.

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-terminal/+bug/1637333/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665794] Re: apport-gtk crashed with SIGABRT in g_assertion_message()

2017-02-17 Thread Domen Vrankar

*** This bug is a duplicate of bug 1622414 ***
https://bugs.launchpad.net/bugs/1622414

This was printed out during upgrade (possibly relevant and related):

Setting up nvidia-375-dev (375.39-0ubuntu1) ...
Processing triggers for libc-bin (2.24-7ubuntu2) ...
/sbin/ldconfig.real: /usr/lib/nvidia-375/libEGL.so.1 is not a symbolic link

/sbin/ldconfig.real: /usr/lib32/nvidia-375/libEGL.so.1 is not a symbolic
link

Setting up alsa-utils (1.1.3-1ubuntu1) ...

then later:

ttf-mscorefonts-installer: processing...
ttf-mscorefonts-installer: downloading 
http://downloads.sourceforge.net/corefonts/andale32.exe
Get:1 http://downloads.sourceforge.net/corefonts/andale32.exe [198 kB]
Fetched 198 kB in 2s (77,1 kB/s)
 
W: Download is performed unsandboxed as root as file 
'/var/lib/update-notifier/package-data-downloads/partial/andale32.exe' couldn't 
be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied)
ttf-mscorefonts-installer: downloading 
http://downloads.sourceforge.net/corefonts/arial32.exe
Err:1 http://downloads.sourceforge.net/corefonts/arial32.exe
  Redirection from https to 
'http://downloads.sourceforge.net/mirrorproblem?failedmirror=kent.dl.sourceforge.net'
 is forbidden
W: Download is performed unsandboxed as root as file 
'/var/lib/update-notifier/package-data-downloads/partial/arial32.exe' couldn't 
be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied)
E: Failed to fetch https://kent.dl.sourceforge.net/project/corefonts/the 
fonts/final/arial32.exe  Redirection from https to 
'http://downloads.sourceforge.net/mirrorproblem?failedmirror=kent.dl.sourceforge.net'
 is forbidden
E: Download Failed

then again:

Setting up nvidia-375-dev (375.39-0ubuntu1) ...
Processing triggers for libc-bin (2.24-7ubuntu2) ...
/sbin/ldconfig.real: /usr/lib/nvidia-375/libEGL.so.1 is not a symbolic link

/sbin/ldconfig.real: /usr/lib32/nvidia-375/libEGL.so.1 is not a symbolic
link

Setting up alsa-utils (1.1.3-1ubuntu1) ...

and at the end of the upgrade the final output:

Setting up libreoffice-help-en-us (1:5.3.0~rc3-0ubuntu1) ...
Processing triggers for initramfs-tools (0.125ubuntu9) ...
update-initramfs: Generating /boot/initrd.img-4.9.0-15-generic
Processing triggers for libc-bin (2.24-7ubuntu2) ...
/sbin/ldconfig.real: /usr/lib/nvidia-375/libEGL.so.1 is not a symbolic link

/sbin/ldconfig.real: /usr/lib32/nvidia-375/libEGL.so.1 is not a symbolic
link


Hope this helps.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1665794

Title:
  apport-gtk crashed with SIGABRT in g_assertion_message()

Status in apport package in Ubuntu:
  New

Bug description:
  I get a crash report quite often for the past couple of days (when
  first calling sudo apt update abd then it crashes during sudo apt
  upgrade) but usually the report window just states that I have
  packages that were not at the latest version. This is the first tame
  that it crashed a bit after the upgrade has already finished.

  ProblemType: Crash
  DistroRelease: Ubuntu 17.04
  Package: apport-gtk 2.20.4-0ubuntu2
  ProcVersionSignature: Ubuntu 4.9.0-15.16-generic 4.9.5
  Uname: Linux 4.9.0-15-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.4-0ubuntu2
  Architecture: amd64
  CrashReports:
   644:0:115:0:2017-02-17 22:05:34.942991783 +0100:2017-02-17 
22:05:34.942991783 +0100:/var/crash/_usr_lib_fwupd_fwupd.0.upload
   640:1000:115:4725303:2017-02-17 22:11:20.915859460 +0100:2017-02-17 
22:11:21.915859460 +0100:/var/crash/_usr_bin_chrome-gnome-shell.1000.crash
   600:108:115:0:2017-02-17 22:05:35.758990837 +0100:2017-02-12 
20:57:23.211811766 +0100:/var/crash/_usr_lib_fwupd_fwupd.0.uploaded
   640:0:115:11331191:2017-02-17 22:05:33.842991828 +0100:2017-02-17 
22:05:34.942991783 +0100:/var/crash/_usr_lib_fwupd_fwupd.0.crash
   640:1000:115:13665438:2017-02-17 22:13:45.357786655 +0100:2017-02-17 
22:13:46.357786655 +0100:/var/crash/_usr_share_apport_apport-gtk.1000.crash
  CurrentDesktop: GNOME
  Date: Fri Feb 17 22:13:41 2017
  ExecutablePath: /usr/share/apport/apport-gtk
  InstallationDate: Installed on 2015-09-04 (532 days ago)
  InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Alpha amd64 (20150904)
  InterpreterPath: /usr/bin/python3.5
  PackageArchitecture: all
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gtk
  Signal: 6
  SourcePackage: apport
  StacktraceTop:
   g_assertion_message () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
  Title: apport-gtk crashed with SIGABRT in g_assertion_message()
  UpgradeStatus: Upgraded to zesty on 2017-02-04 (13

[Touch-packages] [Bug 1660633] Re: /usr/bin/ucfr: line ... : [: : integer expression expected

2017-02-17 Thread Manfred Hampl

Meanwhile in
https://answers.launchpad.net/ubuntu/+source/ucf/+question/448737 we
identified two areas where the ucfr script misbehaved in the environment
of the original poster.

The following workarounds helped:

Change all occurrences of $" into "'$'
Change all occurrences of egrep into grep -E

Even if we do not know why the ucfr script failed in the original
poster's environment, these modifications might be worth being
considered for future versions of the ucfr script.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ucf in Ubuntu.
https://bugs.launchpad.net/bugs/1660633

Title:
  /usr/bin/ucfr: line ... : [: : integer expression expected

Status in ucf package in Ubuntu:
  Incomplete

Bug description:
  I've had a reoccurring issue: 
https://ubuntuforums.org/showthread.php?t=2350682
  Running: ucf_3.0036_all.deb

  
http://askubuntu.com/questions/875415/usr-bin-ucfr-errors-integer-expression-expected
  
http://serverfault.com/questions/827873/grub-pc-update-fail-dev-sda-ext2-doesnt-support-embedding

  I don't know why ucfr is erroring out but the accumulated errors are
  now enough to stall priority packages which I feel hamstrung about.
  I've reinstalled the ucf package and danced around the issue enough.

  Any maintainers have a shot in the dark for why this would be
  happening?

  Discussion:
  https://answers.launchpad.net/ubuntu/+source/ucf/+question/448737

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ucf/+bug/1660633/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1637333] Re: gnome-terminal crashes when tab is dragged onto another tab's terminal area

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gtk+3.0 (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1637333

Title:
  gnome-terminal crashes when tab is dragged onto another tab's terminal
  area

Status in GNOME Terminal:
  Confirmed
Status in GTK+:
  Confirmed
Status in gnome-terminal package in Ubuntu:
  Confirmed
Status in gtk+3.0 package in Ubuntu:
  Confirmed

Bug description:
  This bug occurs when I drag an existing terminal tab out of the tab
  bar and drop it onto the text area of the open terminal. Usually
  occurs by accident, to be honest (when I don't mean to drag the tab at
  all, for instance) but it's 100% reproducible intentionally.

  I found several old bug reports on similar issues, but they were
  either not detailed enough to figure out if they were exactly the same
  or were closed as duplicates of a bug that no longer exists
  (https://bugs.launchpad.net/ubuntu/+source/gnome-
  terminal/+bug/1442826).

  Apport generated a report (title: gnome-terminal-server crashed with
  SIGABRT in g_assertion_message()) for me and then helpfully explained
  that the bug had already been filed. It redirected me to a bug that
  doesn't exist (https://bugs.launchpad.net/bugs/1595907) though, so I'm
  refiling it here.

  1. Ubuntu release:
  spyro@julep:~$ lsb_release -rd
  Description:  Ubuntu 16.04.1 LTS
  Release:  16.04

  2. Package version:
  spyro@julep:~$ apt-cache policy gnome-terminal
  gnome-terminal:
Installed: 3.20.2-1ubuntu3~ubuntu16.04.1
Candidate: 3.20.2-1ubuntu3~ubuntu16.04.1
Version table:
   *** 3.20.2-1ubuntu3~ubuntu16.04.1 500
  500 http://ppa.launchpad.net/gnome3-team/gnome3-staging/ubuntu 
xenial/main amd64 Packages
  100 /var/lib/dpkg/status
   3.18.3-1ubuntu1 500
  500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 Packages
  spyro@julep:~$ 

  3. Expected behavior: Tab should split into a new window (as it does
  if you drop it onto someplace that's not a gnome-terminal window). At
  the worst, it should go back to where it was on the tab bar instead of
  crashing.

  4. Actual behavior: The whole gnome-terminal window crashes, losing
  any activity or work on other tabs. Other open gnome-terminal windows
  also crash and close.

  From /var/log/syslog:
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
(gnome-terminal-server:30721): G
  Lib-GObject-CRITICAL **: g_object_ref: assertion 'G_IS_OBJECT (object)' failed
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
(gnome-terminal-server:30721): G
  tk-CRITICAL **: gtk_container_get_focus_child: assertion 'GTK_IS_CONTAINER 
(cont
  ainer)' failed
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
(gnome-terminal-server:30721): G
  Lib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' 
failed
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
(gnome-terminal-server:30721): G
  tk-CRITICAL **: gtk_container_get_focus_child: assertion 'GTK_IS_CONTAINER 
(cont
  ainer)' failed
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: **
  Oct 27 14:54:03 julep org.gnome.Terminal[2217]: 
Gtk:ERROR:/build/gtk+3.0-j0Vp0u/
  gtk+3.0-3.20.8/./gtk/gtkwidget.c:5830:gtk_widget_get_frame_clock: assertion 
fail
  ed: (window != NULL)
  Oct 27 14:54:06 julep /usr/lib/gdm3/gdm-x-session[2197]: Activating service 
name
  ='org.gnome.Contacts.SearchProvider'
  Oct 27 14:54:06 julep /usr/lib/gdm3/gdm-x-session[2197]: Activating service 
name
  ='org.gnome.Documents'
  Oct 27 14:54:06 julep /usr/lib/gdm3/gdm-x-session[2197]: Activating service 
name
  ='org.gnome.Nautilus'

  I've also saved the apport-generated crash report if that would be
  helpful to upload.

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-terminal/+bug/1637333/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1664065] Re: Canon mf4880 driver and cups install correctly. but no print

2017-02-17 Thread Till Kamppeter

Please follow the instructions of the section "CUPS error_log" on
https://wiki.ubuntu.com/DebuggingPrintingProblems for failed jobs.

** Changed in: cups (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1664065

Title:
  Canon mf4880 driver and cups install correctly. but no print

Status in cups package in Ubuntu:
  Incomplete

Bug description:
  Everything install correctly. printer was discovered in usb and
  network mode both. Print job with finish without error, but no print
  on the printer.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.10
  Package: cups 2.1.3-4
  ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40
  Uname: Linux 4.4.0-62-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.5
  Architecture: amd64
  Date: Sun Feb 12 16:43:21 2017
  InstallationDate: Installed on 2015-12-29 (411 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  Lpstat: device for Canon_MF4800_Series: cnusb:/dev/usb/lp0
  MachineType: Acer Aspire TC-605
  Papersize: letter
  PpdFiles: Canon_MF4800_Series: Canon MF4800 Series UFRII LT ver.3.0
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm-256color
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic.efi.signed 
root=UUID=daaeeb49-534f-4636-895e-a56cafb78c19 ro quiet splash vt.handoff=7
  SourcePackage: cups
  UpgradeStatus: Upgraded to yakkety on 2017-02-12 (0 days ago)
  dmi.bios.date: 03/21/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P11-A4
  dmi.board.name: Aspire TC-605
  dmi.board.vendor: Acer
  dmi.chassis.type: 3
  dmi.chassis.vendor: Acer
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP11-A4:bd03/21/2014:svnAcer:pnAspireTC-605:pvr:rvnAcer:rnAspireTC-605:rvr:cvnAcer:ct3:cvr:
  dmi.product.name: Aspire TC-605
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1664065/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665794] Re: apport-gtk crashed with SIGABRT in g_assertion_message()

*** This bug is a duplicate of bug 1622414 ***
https://bugs.launchpad.net/bugs/1622414

Thank you for taking the time to report this crash and helping to make
this software better.  This particular crash has already been reported
and is a duplicate of bug #1622414, so is being marked as such.  Please
look at the other bug report to see if there is any missing information
that you can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** Attachment removed: "CoreDump.gz"
   
https://bugs.launchpad.net/bugs/1665794/+attachment/4821055/+files/CoreDump.gz

** Attachment removed: "Disassembly.txt"
   
https://bugs.launchpad.net/bugs/1665794/+attachment/4821057/+files/Disassembly.txt

** Attachment removed: "ProcMaps.txt"
   
https://bugs.launchpad.net/bugs/1665794/+attachment/4821060/+files/ProcMaps.txt

** Attachment removed: "ProcStatus.txt"
   
https://bugs.launchpad.net/bugs/1665794/+attachment/4821061/+files/ProcStatus.txt

** Attachment removed: "Registers.txt"
   
https://bugs.launchpad.net/bugs/1665794/+attachment/4821062/+files/Registers.txt

** Attachment removed: "Stacktrace.txt"
   
https://bugs.launchpad.net/bugs/1665794/+attachment/4821063/+files/Stacktrace.txt

** Attachment removed: "ThreadStacktrace.txt"
   
https://bugs.launchpad.net/bugs/1665794/+attachment/4821064/+files/ThreadStacktrace.txt

** This bug has been marked a duplicate of private bug 1622414

** Information type changed from Private to Public

** Tags removed: need-amd64-retrace

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1665794

Title:
  apport-gtk crashed with SIGABRT in g_assertion_message()

Status in apport package in Ubuntu:
  New

Bug description:
  I get a crash report quite often for the past couple of days (when
  first calling sudo apt update abd then it crashes during sudo apt
  upgrade) but usually the report window just states that I have
  packages that were not at the latest version. This is the first tame
  that it crashed a bit after the upgrade has already finished.

  ProblemType: Crash
  DistroRelease: Ubuntu 17.04
  Package: apport-gtk 2.20.4-0ubuntu2
  ProcVersionSignature: Ubuntu 4.9.0-15.16-generic 4.9.5
  Uname: Linux 4.9.0-15-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.4-0ubuntu2
  Architecture: amd64
  CrashReports:
   644:0:115:0:2017-02-17 22:05:34.942991783 +0100:2017-02-17 
22:05:34.942991783 +0100:/var/crash/_usr_lib_fwupd_fwupd.0.upload
   640:1000:115:4725303:2017-02-17 22:11:20.915859460 +0100:2017-02-17 
22:11:21.915859460 +0100:/var/crash/_usr_bin_chrome-gnome-shell.1000.crash
   600:108:115:0:2017-02-17 22:05:35.758990837 +0100:2017-02-12 
20:57:23.211811766 +0100:/var/crash/_usr_lib_fwupd_fwupd.0.uploaded
   640:0:115:11331191:2017-02-17 22:05:33.842991828 +0100:2017-02-17 
22:05:34.942991783 +0100:/var/crash/_usr_lib_fwupd_fwupd.0.crash
   640:1000:115:13665438:2017-02-17 22:13:45.357786655 +0100:2017-02-17 
22:13:46.357786655 +0100:/var/crash/_usr_share_apport_apport-gtk.1000.crash
  CurrentDesktop: GNOME
  Date: Fri Feb 17 22:13:41 2017
  ExecutablePath: /usr/share/apport/apport-gtk
  InstallationDate: Installed on 2015-09-04 (532 days ago)
  InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Alpha amd64 (20150904)
  InterpreterPath: /usr/bin/python3.5
  PackageArchitecture: all
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gtk
  Signal: 6
  SourcePackage: apport
  StacktraceTop:
   g_assertion_message () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   g_assertion_message_expr () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
  Title: apport-gtk crashed with SIGABRT in g_assertion_message()
  UpgradeStatus: Upgraded to zesty on 2017-02-04 (13 days ago)
  UserGroups: adm cdrom dip docker lpadmin plugdev sambashare sudo vboxusers

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1665794/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

2017-02-17 Thread Barry Warsaw

I will say that I've noticed a delay in having the network come up too,
but that predates the new network-manage, and the latest systemd.  It's
been going on for a while now but I haven't managed to report a bug on
it yet.

I have several startup apps configured in my Gnome environment,
including Chromium, Emacs, Claws, and Firefox (yes, two browsers :).
Immediately after a reboot and login, once say Chromium comes up, many
of the pages are reporting errors that they can't get to the domain.
Just visiting the tab is enough to trigger Chromium to do an auto-reload
of the page, and that always works.  Or if I have to manually reload, it
works.  There's just some small bit of time after a reboot+login where
the network is inaccessible.

But I don't think this is at all related to this bug.  I suppose I
should try to figure out which package is at fault and report a bug on
it.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1505368] ProcEnviron.txt

apport information

** Attachment added: "ProcEnviron.txt"
   
https://bugs.launchpad.net/bugs/1505368/+attachment/4821052/+files/ProcEnviron.txt

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1505368

Title:
  Bug reports after segmentation fault are never generated

Status in apport package in Ubuntu:
  New

Bug description:
  After `apport` recognizes a segmentation fault it displays a dialog
  which allows to close or restart the application and contains a
  checkbox which offers the option to file a bug online. Even if the box
  is checked no online form to open a new bug report is opened in the
  browser (as described on https://wiki.ubuntu.com/Apport).

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: apport 2.17.2-0ubuntu1.5
  ProcVersionSignature: Ubuntu 3.19.0-31.36-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-31-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Oct 12 21:29:18 2015
  InstallationDate: Installed on 2015-09-14 (27 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  ApportLog:
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: called for pid 19798, 
signal 6, core limit 0
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: executable: 
/usr/lib/gnome-terminal/gnome-terminal-server (command line 
"/usr/lib/gnome-terminal/gnome-terminal-server")
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: debug: session gdbus 
call: (true,)
   
   ERROR: apport (pid 4083) Fri Feb 17 22:37:39 2017: wrote report 
/var/crash/_usr_lib_gnome-terminal_gnome-terminal-server.1000.crash
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 16.10
  InstallationDate: Installed on 2015-12-12 (433 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  NonfreeKernelModules: zfs zunicode icp zcommon znvpair zavl
  Package: apport 2.20.3-0ubuntu8.2
  PackageArchitecture: all
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Tags:  yakkety
  Uname: Linux 4.8.0-37-generic x86_64
  UpgradeStatus: Upgraded to yakkety on 2016-10-17 (123 days ago)
  UserGroups: adm autopilot bumblebee cdrom dip libvirt libvirtd lp lpadmin 
plugdev sambashare saned sudo vboxusers
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1505368/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1505368] JournalErrors.txt

apport information

** Attachment added: "JournalErrors.txt"
   
https://bugs.launchpad.net/bugs/1505368/+attachment/4821051/+files/JournalErrors.txt

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1505368

Title:
  Bug reports after segmentation fault are never generated

Status in apport package in Ubuntu:
  New

Bug description:
  After `apport` recognizes a segmentation fault it displays a dialog
  which allows to close or restart the application and contains a
  checkbox which offers the option to file a bug online. Even if the box
  is checked no online form to open a new bug report is opened in the
  browser (as described on https://wiki.ubuntu.com/Apport).

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: apport 2.17.2-0ubuntu1.5
  ProcVersionSignature: Ubuntu 3.19.0-31.36-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-31-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Oct 12 21:29:18 2015
  InstallationDate: Installed on 2015-09-14 (27 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  ApportLog:
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: called for pid 19798, 
signal 6, core limit 0
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: executable: 
/usr/lib/gnome-terminal/gnome-terminal-server (command line 
"/usr/lib/gnome-terminal/gnome-terminal-server")
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: debug: session gdbus 
call: (true,)
   
   ERROR: apport (pid 4083) Fri Feb 17 22:37:39 2017: wrote report 
/var/crash/_usr_lib_gnome-terminal_gnome-terminal-server.1000.crash
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 16.10
  InstallationDate: Installed on 2015-12-12 (433 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  NonfreeKernelModules: zfs zunicode icp zcommon znvpair zavl
  Package: apport 2.20.3-0ubuntu8.2
  PackageArchitecture: all
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Tags:  yakkety
  Uname: Linux 4.8.0-37-generic x86_64
  UpgradeStatus: Upgraded to yakkety on 2016-10-17 (123 days ago)
  UserGroups: adm autopilot bumblebee cdrom dip libvirt libvirtd lp lpadmin 
plugdev sambashare saned sudo vboxusers
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1505368/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1505368] CrashReports.txt

apport information

** Attachment added: "CrashReports.txt"
   
https://bugs.launchpad.net/bugs/1505368/+attachment/4821049/+files/CrashReports.txt

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1505368

Title:
  Bug reports after segmentation fault are never generated

Status in apport package in Ubuntu:
  New

Bug description:
  After `apport` recognizes a segmentation fault it displays a dialog
  which allows to close or restart the application and contains a
  checkbox which offers the option to file a bug online. Even if the box
  is checked no online form to open a new bug report is opened in the
  browser (as described on https://wiki.ubuntu.com/Apport).

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: apport 2.17.2-0ubuntu1.5
  ProcVersionSignature: Ubuntu 3.19.0-31.36-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-31-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Oct 12 21:29:18 2015
  InstallationDate: Installed on 2015-09-14 (27 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  ApportLog:
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: called for pid 19798, 
signal 6, core limit 0
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: executable: 
/usr/lib/gnome-terminal/gnome-terminal-server (command line 
"/usr/lib/gnome-terminal/gnome-terminal-server")
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: debug: session gdbus 
call: (true,)
   
   ERROR: apport (pid 4083) Fri Feb 17 22:37:39 2017: wrote report 
/var/crash/_usr_lib_gnome-terminal_gnome-terminal-server.1000.crash
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 16.10
  InstallationDate: Installed on 2015-12-12 (433 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  NonfreeKernelModules: zfs zunicode icp zcommon znvpair zavl
  Package: apport 2.20.3-0ubuntu8.2
  PackageArchitecture: all
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Tags:  yakkety
  Uname: Linux 4.8.0-37-generic x86_64
  UpgradeStatus: Upgraded to yakkety on 2016-10-17 (123 days ago)
  UserGroups: adm autopilot bumblebee cdrom dip libvirt libvirtd lp lpadmin 
plugdev sambashare saned sudo vboxusers
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1505368/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1505368] Dependencies.txt

apport information

** Attachment added: "Dependencies.txt"
   
https://bugs.launchpad.net/bugs/1505368/+attachment/4821050/+files/Dependencies.txt

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1505368

Title:
  Bug reports after segmentation fault are never generated

Status in apport package in Ubuntu:
  New

Bug description:
  After `apport` recognizes a segmentation fault it displays a dialog
  which allows to close or restart the application and contains a
  checkbox which offers the option to file a bug online. Even if the box
  is checked no online form to open a new bug report is opened in the
  browser (as described on https://wiki.ubuntu.com/Apport).

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: apport 2.17.2-0ubuntu1.5
  ProcVersionSignature: Ubuntu 3.19.0-31.36-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-31-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Oct 12 21:29:18 2015
  InstallationDate: Installed on 2015-09-14 (27 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  ApportLog:
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: called for pid 19798, 
signal 6, core limit 0
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: executable: 
/usr/lib/gnome-terminal/gnome-terminal-server (command line 
"/usr/lib/gnome-terminal/gnome-terminal-server")
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: debug: session gdbus 
call: (true,)
   
   ERROR: apport (pid 4083) Fri Feb 17 22:37:39 2017: wrote report 
/var/crash/_usr_lib_gnome-terminal_gnome-terminal-server.1000.crash
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 16.10
  InstallationDate: Installed on 2015-12-12 (433 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  NonfreeKernelModules: zfs zunicode icp zcommon znvpair zavl
  Package: apport 2.20.3-0ubuntu8.2
  PackageArchitecture: all
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Tags:  yakkety
  Uname: Linux 4.8.0-37-generic x86_64
  UpgradeStatus: Upgraded to yakkety on 2016-10-17 (123 days ago)
  UserGroups: adm autopilot bumblebee cdrom dip libvirt libvirtd lp lpadmin 
plugdev sambashare saned sudo vboxusers
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1505368/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1505368] upstart.apport.override.txt

apport information

** Attachment added: "upstart.apport.override.txt"
   
https://bugs.launchpad.net/bugs/1505368/+attachment/4821053/+files/upstart.apport.override.txt

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1505368

Title:
  Bug reports after segmentation fault are never generated

Status in apport package in Ubuntu:
  New

Bug description:
  After `apport` recognizes a segmentation fault it displays a dialog
  which allows to close or restart the application and contains a
  checkbox which offers the option to file a bug online. Even if the box
  is checked no online form to open a new bug report is opened in the
  browser (as described on https://wiki.ubuntu.com/Apport).

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: apport 2.17.2-0ubuntu1.5
  ProcVersionSignature: Ubuntu 3.19.0-31.36-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-31-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Oct 12 21:29:18 2015
  InstallationDate: Installed on 2015-09-14 (27 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  ApportLog:
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: called for pid 19798, 
signal 6, core limit 0
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: executable: 
/usr/lib/gnome-terminal/gnome-terminal-server (command line 
"/usr/lib/gnome-terminal/gnome-terminal-server")
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: debug: session gdbus 
call: (true,)
   
   ERROR: apport (pid 4083) Fri Feb 17 22:37:39 2017: wrote report 
/var/crash/_usr_lib_gnome-terminal_gnome-terminal-server.1000.crash
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 16.10
  InstallationDate: Installed on 2015-12-12 (433 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  NonfreeKernelModules: zfs zunicode icp zcommon znvpair zavl
  Package: apport 2.20.3-0ubuntu8.2
  PackageArchitecture: all
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Tags:  yakkety
  Uname: Linux 4.8.0-37-generic x86_64
  UpgradeStatus: Upgraded to yakkety on 2016-10-17 (123 days ago)
  UserGroups: adm autopilot bumblebee cdrom dip libvirt libvirtd lp lpadmin 
plugdev sambashare saned sudo vboxusers
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1505368/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1505368] Re: Bug reports after segmentation fault are never generated

This is still an issue in Ubuntu 16.10/2.20.3-0ubuntu8 and has been in
all Ubuntu versions in between.

It is hard to tell what is supposed to happen because apport doesn't
give any feedback. I guess, a browser is supposed to open where the
report can be completed _or_ the report is uploaded automatically in
which case I didn't managed to find it in the last cases where I tried
to search it with the title displayed in the `apport` dialog or the list
of recent bugs of the affected application on launchpad.net. I also see
no entry in the list of reports on my launchpad.net profile sorted by
age.

** Tags added: apport-collected yakkety

** Description changed:

  After `apport` recognizes a segmentation fault it displays a dialog
  which allows to close or restart the application and contains a checkbox
  which offers the option to file a bug online. Even if the box is checked
  no online form to open a new bug report is opened in the browser (as
  described on https://wiki.ubuntu.com/Apport).
  
  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: apport 2.17.2-0ubuntu1.5
  ProcVersionSignature: Ubuntu 3.19.0-31.36-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-31-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Oct 12 21:29:18 2015
  InstallationDate: Installed on 2015-09-14 (27 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)
+ --- 
+ ApportLog:
+  ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: called for pid 19798, 
signal 6, core limit 0
+  ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: executable: 
/usr/lib/gnome-terminal/gnome-terminal-server (command line 
"/usr/lib/gnome-terminal/gnome-terminal-server")
+  ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: debug: session gdbus 
call: (true,)
+  
+  ERROR: apport (pid 4083) Fri Feb 17 22:37:39 2017: wrote report 
/var/crash/_usr_lib_gnome-terminal_gnome-terminal-server.1000.crash
+ ApportVersion: 2.20.3-0ubuntu8.2
+ Architecture: amd64
+ CurrentDesktop: Unity
+ DistroRelease: Ubuntu 16.10
+ InstallationDate: Installed on 2015-12-12 (433 days ago)
+ InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
+ NonfreeKernelModules: zfs zunicode icp zcommon znvpair zavl
+ Package: apport 2.20.3-0ubuntu8.2
+ PackageArchitecture: all
+ ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
+ Tags:  yakkety
+ Uname: Linux 4.8.0-37-generic x86_64
+ UpgradeStatus: Upgraded to yakkety on 2016-10-17 (123 days ago)
+ UserGroups: adm autopilot bumblebee cdrom dip libvirt libvirtd lp lpadmin 
plugdev sambashare saned sudo vboxusers
+ _MarkForUpload: True

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1505368

Title:
  Bug reports after segmentation fault are never generated

Status in apport package in Ubuntu:
  New

Bug description:
  After `apport` recognizes a segmentation fault it displays a dialog
  which allows to close or restart the application and contains a
  checkbox which offers the option to file a bug online. Even if the box
  is checked no online form to open a new bug report is opened in the
  browser (as described on https://wiki.ubuntu.com/Apport).

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: apport 2.17.2-0ubuntu1.5
  ProcVersionSignature: Ubuntu 3.19.0-31.36-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-31-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Oct 12 21:29:18 2015
  InstallationDate: Installed on 2015-09-14 (27 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)
  --- 
  ApportLog:
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: called for pid 19798, 
signal 6, core limit 0
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: executable: 
/usr/lib/gnome-terminal/gnome-terminal-server (command line 
"/usr/lib/gnome-terminal/gnome-terminal-server")
   ERROR: apport (pid 4083) Fri Feb 17 22:37:25 2017: debug: session gdbus 
call: (true,)
   
   ERROR: apport (pid 4083) Fri Feb 17 22:37:39 2017: wrote report 
/var/crash/_usr_lib_gnome-terminal_gnome-terminal-server.1000.crash
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: amd64
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 16.10
  InstallationDate: Installed on 2015-12-12 (433 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  NonfreeKernelModules: zfs zunicode icp zcommon znvpair zavl
  Package: apport 2.20.3-0ubuntu8.2
  PackageArchitecture: all
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Tags:  yakkety
  Uname: Linux 4.8.0-37-generic x86_64

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

So when I start my computer, then I cannot ping youtube.com, I start
Chromium, I still cannot ping youtube.com, then I open Firefox, and boom
magically everything worked! :)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1661371] Re: [zesty] doesn't offer a window to install missing gstreamer codecs

2017-02-17 Thread Bug Watch Updater

** Changed in: gst-plugins-base
   Status: Unknown => Fix Released

** Changed in: gst-plugins-base
   Importance: Unknown => Medium

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gst-plugins-base1.0 in
Ubuntu.
https://bugs.launchpad.net/bugs/1661371

Title:
  [zesty] doesn't offer a window to install missing gstreamer codecs

Status in gst-plugins-base:
  Fix Released
Status in gst-plugins-base1.0 package in Ubuntu:
  New

Bug description:
  Attempting to play a mp3 file with Rhythmbox on the latest Zesty daily
  build

  Rhythmbox opens but no playback start.
  On the terminal I got this:

  Rhythmbox-Message: Missing plugin: gstreamer|1.0|rhythmbox-metadata|MPEG-1 
Layer 3 (MP3) decoder|decoder-audio/mpeg, mpegversion=(int)1, 
mpegaudioversion=(int)1, layer=(int)3
  /usr/lib/python3/dist-packages/sessioninstaller/core.py:47: PyGIWarning: Gst 
was imported without specifying a version first. Use gi.require_version('Gst', 
'1.0') before import to ensure that the right version gets loaded.
from gi.repository import Gst
  /usr/lib/python3/dist-packages/sessioninstaller/core.py:48: PyGIWarning: Gtk 
was imported without specifying a version first. Use gi.require_version('Gtk', 
'3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk
  Falling back to package information
  Rhythmbox-Message: Missing plugins installed. Updating plugin registry ...

  But the wizard to install the missing codec actually fails to launch.

To manage notifications about this bug go to:
https://bugs.launchpad.net/gst-plugins-base/+bug/1661371/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1388455] Re: apport-gtk gets into endless dialog loop when examine locally is selected

This seems to be fixed in Ubuntu 16.10/2.20.3-0ubuntu8 or earlier.

** Changed in: apport (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1388455

Title:
  apport-gtk gets into endless dialog loop when examine locally is
  selected

Status in apport package in Ubuntu:
  Fix Released

Bug description:
  After a sudden crash of `gedit` which caused the `apport-gtk` dialog
  to be opened the selection of "examine locally" constantly causes the
  dialog where "examine locally" has been selected to show up, i.e. an
  endless loop in dialog windows is produced. The `gnome-terminal`
  popping up and displaying the progress of `apt-get update` and
  patching of binary for local examination doesn't show any
  particularities.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: apport-gtk 2.14.7-0ubuntu8
  Uname: Linux 3.16.7-031607-generic x86_64
  NonfreeKernelModules: zfs zunicode zavl zcommon znvpair
  ApportLog: Error: [Errno 13] Keine Berechtigung: '/var/log/apport.log'
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sat Nov  1 22:20:48 2014
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1388455/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1585084] Re: Volume notification keeps popping up constantly(the notifyosd bubble on top-right corner)

2017-02-17 Thread Peter

Hi. I have the same problem with my installation. I'm using Ubuntu 16.04. I get
the same popping sounds as other users. It seems like that the sound goes very
high for a split second every minute or so and I get the volume notification
bubble with it.
It also happens when I mute the sound. In that case it unmutes the sound and
stays unmutted.
Has anybody with understanding of the inner workings of the sound system
identified the problem yet?
This wasn't an issue for me in Ubuntu 14.04.

--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1585084

Title:
Volume notification keeps popping up constantly(the notifyosd bubble
on top-right corner)

Status in pulseaudio package in Ubuntu:
Confirmed

Bug description:
I upgraded to Ubuntu 16.04 yesterday, I did a clean install while
preserving the home directory which is mounted in a separate
partition. Even during the installation I had constant volume
notification bubble appearing on the top-right corner of my screen, it
would come and go about twice every minute. I just thought it was due
to installing hardware drivers or something but the problem persisted
even when I booted into the freshly installed system. I did some
searching and two users reported the exact problem. And one more
suggested this happens because constant disconnect and reconnect of
the sound card which makes sense as the sound settings flashes briefly
during every popup. Someone on IRC suggested to kill pulseaudio and
thus restart it, that does not fix the issue. I also tried the Live
environment thinking it might be due to some old config files in home
partition (which was preserved during upgrade), but this problem
happens in the live environment as well, which makes sense because it
was present during installation as well.

Users with the same issue:
http://ubuntuforums.org/showthread.php?t=2323815
http://askubuntu.com/questions/773008/constant-volume-osd-in-16-04

http://askubuntu.com/questions/767466/sound-card-being-disconnected-reconnected-constantly

Thanks.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: pulseaudio 1:8.0-0ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
Uname: Linux 4.4.0-22-generic x86_64
ApportVersion: 2.20.1-0ubuntu2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC2: sidd 1651 F pulseaudio
/dev/snd/controlC0: sidd 1651 F pulseaudio
/dev/snd/controlC1: sidd 1651 F pulseaudio
CurrentDesktop: Unity
Date: Tue May 24 12:31:12 2016
InstallationDate: Installed on 2016-05-23 (0 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64
(20160420.1)
SourcePackage: pulseaudio
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 08/23/2011
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0705
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: M5A97 EVO
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr0705:bd08/23/2011:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKComputerINC.:rnM5A97EVO:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: To be filled by O.E.M.
dmi.product.version: To be filled by O.E.M.
dmi.sys.vendor: To be filled by O.E.M.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1585084/+subscriptions

--
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1390265] Re: apport-gtk windw's size become not much larger than the close button of the dialog window title and is not resizable

This seems to be fixed in Ubuntu 16.10/2.20.3-0ubuntu8 or earlier.

** Changed in: apport (Ubuntu)
   Status: New => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1390265

Title:
  apport-gtk windw's size become not much larger than the close button
  of the dialog window title and is not resizable

Status in apport package in Ubuntu:
  Fix Released

Bug description:
  This happens once for a fresh install and then isn't reset
  automatically, i.e. one has to figure out how to resize the window or
  reset the window dimensions or reinstall.

  This issue makes `apport-gtk` unusable.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: apport-gtk 2.14.7-0ubuntu8
  Uname: Linux 3.16.7-031607-generic x86_64
  NonfreeKernelModules: zfs zunicode zavl zcommon znvpair
  ApportLog: Error: [Errno 13] Keine Berechtigung: '/var/log/apport.log'
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Fri Nov  7 01:34:33 2014
  PackageArchitecture: all
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1390265/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1032456] Re: Canon inkjets (and some other printers) print only half of the last page after 20120801 upgrade to v1.5.3-0ubuntu2

2017-02-17 Thread Till Kamppeter

Anyone who has still problems with his printer in the current Ubuntu
release, please follow the instructions of the section "USB printer does
not print or prints garbage" on
https://wiki.ubuntu.com/DebuggingPrintingProblems. In most cases Canon
printers need uni-directional communication, see also comment #62.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1032456

Title:
  Canon inkjets (and some other printers) print only half of the last
  page after 20120801 upgrade to v1.5.3-0ubuntu2

Status in cups package in Ubuntu:
  Fix Released
Status in cups source package in Precise:
  Fix Released

Bug description:
  My Canon i560 was working fine until the update two days ago. Now it fails 
every single job, printing half a page and then ejecting the page when a USB 
reset is issued. Same printer works fine when printing through Windows in 
Virtualbox with USB passthrough.
  Summary: the USB backend "improvements" have rendered my printer useless with 
CUPS. Unloading the usblp module makes no difference - the USB reset is what 
aborts the print job.

  [  224.008042] usb 3-1: reset full-speed USB device number 3 using uhci_hcd
  [  224.161701] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 
0x04A9 pid 0x108

  Kubuntu 12.04

  [IMPACT]

  Everyone with a Canon inkjet connected to USB and also users of some
  other printer models on USB get printouts with the last page being
  incomplete. This happens for every job.

  For everyone with a Samsung printer the problem of bug 995111 shows up
  again.

  [TESTCASE]

  Unfortunately, for reproducing this bug one needs the actual hardware.

  Connect a Canon inkjet (or other models mentioned in this bug report)
  to the USB and print from a completely updated Precise system. The
  last page of each job will come out incomplete.

  Connect a Samsung printer to the USB and print from a completely
  updated Precise system. You will get printouts with weird characters
  (at least from the second job on) as described in bug 995111.

  After installing the proposed package all these problems should
  disappear.

  [Regression Potential]

  Regression risk is very low. The fix is not doing the USB device reset
  on the printer after the job for most printers. The fix contains an
  exception rule for Samsung printers and Prolific Technology
  USB->Parallel adapters, to avoid reoccurring of bug 987485 and bug
  997040. It is still possible that some printers are treated
  incorrectly in terms of whether they need a reset after the job or
  not. As most printers work both with and without reset this risk is
  very low. All reported problems are solved with the proposed fix.

  ***
  dpkg -l "*cups*"|grep ii
  ii  bluez-cups  4.98-2ubuntu7 
   Bluetooth printer driver for CUPS
  ii  cups
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
server
  ii  cups-bsd
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
BSD commands
  ii  cups-client 
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
client programs (SysV)
  ii  cups-common 
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
common files
  ii  cups-filters
1.0.18-0ubuntu0.1OpenPrinting CUPS Filters
  ii  cups-ppdc   
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
PPD manipulation utilities
  ii  ghostscript-cups
9.05~dfsg-0ubuntu4.1 interpreter for the PostScript 
language and for PDF - CUPS filters
  ii  libcups2
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
Core library
  ii  libcupscgi1 
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
CGI library
  ii  libcupsdriver1  
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
Driver library
  ii  libcupsfilters1 
1.0.18-0ubuntu0.1OpenPrinting CUPS Filters - Shared 
library
  ii  libcupsimage2   
1.5.3-0ubuntu2   Common UNIX Printing System(tm) - 
Raster image library
  ii  libcupsmime1
1.5.3-0ubuntu2

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Steve, I am using 232-18ubuntu1.

$ dpkg -l | grep systemd
ii  dbus-user-session  1.10.10-1ubuntu2 
   all  simple interprocess messaging system (systemd --user 
integration)
ii  libnss-resolve:amd64   232-18ubuntu1
   amd64nss module to resolve names via systemd-resolved
ii  libpam-systemd:amd64   232-18ubuntu1
   amd64system and service manager - PAM module
ii  libpam-systemd:i386232-18ubuntu1
   i386 system and service manager - PAM module
ii  libsystemd0:amd64  232-18ubuntu1
   amd64systemd utility library
ii  libsystemd0:i386   232-18ubuntu1
   i386 systemd utility library
ii  python3-systemd233-1
   amd64Python 3 bindings for systemd
ii  systemd232-18ubuntu1
   amd64system and service manager
ii  systemd-sysv   232-18ubuntu1
   amd64system and service manager - SysV links

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Was chatting then I noticed my DNS had suddenly started working normally
and YouTube resolved again.

I ran systemd-resolve --status
Under "Link 2 (eth0)" it said "DNSSEC supported: no".

I then restarted the computer, and now the DNS is broken again. It now
says "DNSSEC supported: yes".

Minutes later (perhaps coincidentally after I started Chromium for the
second time?) my DNS magically works again, and systemd-resolve reports
"DNSSEC supported: no".

It seems DNS does not work when systemd-resolve reports "DNSSEC supported: yes".
And it seems that DNSSEC changes to no and starts working for some reason, I am 
not sure if this is triggered by time or some user action such as starting a 
browser or something.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665785] [NEW] [N501VW, Realtek ALC668, Black Headphone Out, Right] Background noise or low volume

2017-02-17 Thread Andrey Solodovnikov

Public bug reported:

There is a background hissing/squeaking noise in my headphones every time I 
resume suspend.
Speakers and HDMI audio are not affected.
I've tried many solutions to fix it (alsa force-reload etc.), but none of them 
worked well.
More detailes you can find here:
http://askubuntu.com/questions/884051/constant-hissing-sound-after-suspend-asus-zenbook-ux501-vw


Standard four questions:
1) Ubuntu 16.04.1 LTS
2) Kernel 4.8.17-040817-generic (also tried 4.4.0 and 4.3.5)
3) When I resume suspend I hear no noise unless I play something
4) Right after suspend resume there is a background noise

Thanks!

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: alsa-base 1.0.25+dfsg-0ubuntu5
Uname: Linux 4.8.17-040817-generic x86_64
NonfreeKernelModules: nvidia_drm nvidia_modeset nvidia
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/pcmC0D0c:   firesword   3563 F...m pulseaudio
 /dev/snd/pcmC0D0p:   firesword   3563 F...m pulseaudio
 /dev/snd/controlC0:  firesword   3563 F pulseaudio
CurrentDesktop: Unity
Date: Fri Feb 17 23:54:52 2017
InstallationDate: Installed on 2017-02-17 (0 days ago)
InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719)
PackageArchitecture: all
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful
Symptom_Card: Built-in Audio - HDA Intel PCH
Symptom_Jack: Black Headphone Out, Right
Symptom_PulsePlaybackTest: PulseAudio playback test successful
Symptom_Type: High background noise, or volume is too low
Title: [N501VW, Realtek ALC668, Black Headphone Out, Right] Background noise or 
low volume
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/28/2016
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: N501VW.304
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: N501VW
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrN501VW.304:bd11/28/2016:svnASUSTeKCOMPUTERINC.:pnN501VW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501VW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
dmi.product.name: N501VW
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.
modified.conffile..etc.modprobe.d.alsa-base.conf: [modified]
mtime.conffile..etc.modprobe.d.alsa-base.conf: 2017-02-17T21:26:16.180413

** Affects: alsa-driver (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1665785

Title:
  [N501VW, Realtek ALC668, Black Headphone Out, Right] Background noise
  or low volume

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  There is a background hissing/squeaking noise in my headphones every time I 
resume suspend.
  Speakers and HDMI audio are not affected.
  I've tried many solutions to fix it (alsa force-reload etc.), but none of 
them worked well.
  More detailes you can find here:
  
http://askubuntu.com/questions/884051/constant-hissing-sound-after-suspend-asus-zenbook-ux501-vw

  
  Standard four questions:
  1) Ubuntu 16.04.1 LTS
  2) Kernel 4.8.17-040817-generic (also tried 4.4.0 and 4.3.5)
  3) When I resume suspend I hear no noise unless I play something
  4) Right after suspend resume there is a background noise

  Thanks!

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  Uname: Linux 4.8.17-040817-generic x86_64
  NonfreeKernelModules: nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC0D0c:   firesword   3563 F...m pulseaudio
   /dev/snd/pcmC0D0p:   firesword   3563 F...m pulseaudio
   /dev/snd/controlC0:  firesword   3563 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Feb 17 23:54:52 2017
  InstallationDate: Installed on 2017-02-17 (0 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful
  Symptom_Card: Built-in Audio - HDA Intel PCH
  Symptom_Jack: Black Headphone Out, Right
  Symptom_PulsePlaybackTest: PulseAudio playback test successful
  Symptom_Type: High background noise, or volume is too low
  Title: [N501VW, Realtek ALC668, Black Headphone Out, Right] Background noise 
or low volume
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/28/2016
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: N501VW.304
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: N501VW

[Touch-packages] [Bug 1665432] Re: Error with cups-daemon package when reinstalling many packages to recover wireless connection with QCA9377

2017-02-17 Thread Till Kamppeter

*** This bug is a duplicate of bug 1642966 ***
https://bugs.launchpad.net/bugs/1642966

** This bug has been marked a duplicate of bug 1642966
   package cups-daemon 2.1.3-4 failed to install/upgrade: subprocess new 
pre-removal script returned error exit status 1

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1665432

Title:
  Error with cups-daemon package when reinstalling many packages to
  recover wireless connection with QCA9377

Status in cups package in Ubuntu:
  New

Bug description:
  I had a issue with my Wireless and Bluetooth card, Qualcomm Atheros
  Device [168c:0042] (rev 30), which appears on Windows 10 as QCA9377,
  and to solve it I have searched and tried different alternatives. The
  one that worked was to reinstall many packages, all the ones I have
  found when searching for, firstly, "wireless", then "wifi" and then
  "internet", on synaptic. When doing the "internet" reinstall, a error
  happened on cups-daemon and it crashed. When I tried again, it worked.
  I rebooted the computer and the Wireless is functioning again
  (Bluetooth was already OK).

  I am using the Kernel 4.9.10-040910-generic from
  http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.9.10/ because I was
  trying to solve this issue and because the official Kernles 4.4 and
  4.8 don't eject external HDDs from the USB 3.0 correctly. The notebook
  model is Lenovo Ideapad 310-14ISK.

  While this window to report the bug appeared saying cups is the
  culprit, all this only happened because the wireless device QCA9377
  was not working.

  usuario@usuario-Lenovo-ideapad-310-14ISK:~$ lsb_release -rd
  Description:  Ubuntu 16.04.2 LTS
  Release:  16.04

  usuario@usuario-Lenovo-ideapad-310-14ISK:~$ uname -a
  Linux usuario-Lenovo-ideapad-310-14ISK 4.9.10-040910-generic #201702141931 
SMP Wed Feb 15 00:33:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

  I hope this information may be helpful.

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: cups-daemon 2.1.3-4
  Uname: Linux 4.9.10-040910-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.5
  Architecture: amd64
  CupsErrorLog: W [16/Feb/2017:14:42:01 -0200] Notifier for subscription 298 
(dbus://) went away, retrying!
  Date: Thu Feb 16 16:05:14 2017
  ErrorMessage: sub-processo novo script pre-removal retornou estado de saída 
de erro 1
  InstallationDate: Installed on 2016-12-31 (47 days ago)
  InstallationMedia: Xubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  Lpstat: device for Deskjet-2050-J510-series: 
hp:/usb/Deskjet_2050_J510_series?serial=BR1C1FK1K005D1
  MachineType: LENOVO 80UG
  Papersize: a4
  PpdFiles: Deskjet-2050-J510-series: HP Deskjet 2050 j510 Series, hpcups 3.16.3
  ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-4.9.10-040910-generic 
root=UUID=0fbb0f28-6764-4447-a890-dc966d1f8adf ro
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.9.10-040910-generic 
root=UUID=0fbb0f28-6764-4447-a890-dc966d1f8adf ro
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.19
  SourcePackage: cups
  Title: package cups-daemon 2.1.3-4 failed to install/upgrade: sub-processo 
novo script pre-removal retornou estado de saída de erro 1
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/03/2016
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 0XCN37WW
  dmi.board.asset.tag: NO Asset Tag
  dmi.board.name: Toronto 4A2
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0J40679 WIN
  dmi.chassis.asset.tag: NO Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo ideapad 310-14ISK
  dmi.modalias: 
dmi:bvnLENOVO:bvr0XCN37WW:bd10/03/2016:svnLENOVO:pn80UG:pvrLenovoideapad310-14ISK:rvnLENOVO:rnToronto4A2:rvrSDK0J40679WIN:cvnLENOVO:ct10:cvrLenovoideapad310-14ISK:
  dmi.product.name: 80UG
  dmi.product.version: Lenovo ideapad 310-14ISK
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1665432/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

2017-02-17 Thread Steve Langasek

André, Fred, are you both definitely running the newest version of
systemd-resolved?  You must be using the version from systemd
232-17ubuntu1, which just reached zesty yesterday.  The resolved service
*should* be automatically restarted when you upgrade the package.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1663048] Re: mirclient gets out of sync

I've got a branch up for changing desktop-launch to point at mir-libs
[1].  I also adjust LD_LIBRARY_PATH, so apps won't have to manually add
that.  They just need to plug into mir-libs.

[1] https://github.com/ubuntu/snapcraft-desktop-helpers/pull/54

** Also affects: unity8-desktop-session (Ubuntu)
   Importance: Undecided
   Status: New

** Branch linked: lp:~mterry/unity8-desktop-session/mir-libs

** Changed in: unity8-desktop-session (Ubuntu)
 Assignee: (unassigned) => Michael Terry (mterry)

** Changed in: unity8-desktop-session (Ubuntu)
   Status: New => In Progress

** Changed in: unity8-desktop-session (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1663048

Title:
  mirclient gets out of sync

Status in Canonical System Image:
  Confirmed
Status in Ubuntu App Platform:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress
Status in unity8-desktop-session package in Ubuntu:
  In Progress

Bug description:
  Because we directly include mir client libraries in the platform (due
  to a dependency of qtubuntu), when the mir interface is revised we get
  out of sync. The mir team publishes a mir-libs snap that tracks these
  changes and exposes a mir-libs content interface. We should
  investigate if that can be used transparently by apps connected to the
  platform.

  as of this report they are out of sync.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1663048/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Touch-packages] [Bug 1385817] Re: initscripts package fails to upgrade if there are local init scripts on the system with no LSB headers

2017-02-17 Thread Bernhard Nikola

thx for answer.

There are more than one way to install an operation system.
In my opinion it was a -not fixed fault- during installation with a 
non-efi bios.

Bernhard





Am 17.02.2017 um 15:50 schrieb Phillip Susi:
> If this isn't a bug in Ubuntu and there isn't anything we can do about
> it, then why has it not been closed as invalid or wontfix?
>

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to sysvinit in Ubuntu.
https://bugs.launchpad.net/bugs/1385817

Title:
  initscripts package fails to upgrade if there are local init scripts
  on the system with no LSB headers

Status in sysvinit package in Ubuntu:
  Triaged

Bug description:
  The dependency-based boot sequencing originally introduced upstream
  with Debian 6.0 is now always enabled in Ubuntu 14.10.

  For optimal sequencing, all init.d scripts should declare their
  dependencies in an LSB header. This is already the case for scripts
  shipped in Ubuntu, but users should check their local scripts and
  consider adding that information.

  For more information on this feature refer to the information
  available in /usr/share/doc/insserv/README.Debian.

  ProblemType: Package
  DistroRelease: Ubuntu 14.10
  Package: initscripts-2.88dsf 41ubuntu18
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  Uname: Linux x86_64 3.13.0-37-generic
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  Date: Sun October 26 2014 7:52:55
  DuplicateSignature: Package: initscripts: 2.88dsf-41ubuntu18: the 
post-installation script subprocess installed returned error exit status 1
  ErrorMessage: The post-install script subprocess installed returned error 
exit status 1
  InstallationDate: Installed on 2014-08-06 (80 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  SourcePackage: sysvinit
  Title: initscripts package 2.88dsf-41ubuntu18 failed to install / upgrade: 
subprocess installed post-installation script returned error exit status 1
  UpgradeStatus: Upgraded to utopic on 2014-10-26 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/sysvinit/+bug/1385817/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1663048] Re: mirclient gets out of sync

Bug 1665775 is the request for mir-libs to be auto-connected.

** No longer affects: snapd

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1663048

Title:
  mirclient gets out of sync

Status in Canonical System Image:
  Confirmed
Status in Ubuntu App Platform:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Because we directly include mir client libraries in the platform (due
  to a dependency of qtubuntu), when the mir interface is revised we get
  out of sync. The mir team publishes a mir-libs snap that tracks these
  changes and exposes a mir-libs content interface. We should
  investigate if that can be used transparently by apps connected to the
  platform.

  as of this report they are out of sync.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1663048/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

2017-02-17 Thread Barry Warsaw

Interesting.  It worked and works for me.  I tested the version in my
PPA, both outside and inside a chroot (it was the inside-chroot that was
previously broken).  I just dist-upgraded my other Zesty machine and
rebooted, and I am having no troubles resolving both IP and domain names
both on my LAN and in the wider internet (www.ubuntu.com,
www.python.org, youtube.com).  The output of `systemd-resolve --status`
LGTM, with my bridge0 link getting the correct DNS server (local to my
LAN) and DNS domain.

chroots also look good (previously they could not get to my apt-cache-ng
proxy on my LAN).

Virtual machines on the same host are also working fine afaict.

Since two of you have reported problems so closely together, there must
be Something Going On, but I cannot reproduce it.

Can you please review your Network Connections from the network manager
settings panel?  Is there anything weird, misconfigured, or unexpected
there?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Barry, I think something went wrong. My DNS worked previously, but after
the update it resolves google.com but not many other domains such as
youtube.com. :(

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1657440] Re: apt won't redownload Release.gpg after inconsistent cache updates made while UCA is being updated

2017-02-17 Thread Samuel Matzek

[Impact] 
An apt update of an apt repository that does not use InRelease during the time 
it is being updated can cause the gpg file to not be downloaded and updated.  
This makes the packages from the repository be unable to be authenticated.

The Ubuntu Cloud Archive is one of the archives that meets this
criteria.

The impact to downstream automation deployment code is that if they are
adding the UCA repo to a system and calling apt update during the time
the UCA is being updated by Canonical, the repo can get into a state
where the Release.gpg file is not there and all package installs will
fail due to "unauthenticated packages" error.


[Test Case]
A detailed python script was attached.

To reproduce this outside that script you would want to:
1. Add the UCA repo
2. Do the following in a loop starting at 43 minutes after the hour and run it 
until 55 minutes after the hour:
2.1 Remove these files to simulate the UCA repo being added the first time.
/var/lib/apt/lists/ubuntu-cloud.archive.canonical.com_ubuntu_dists_xenial-updates_newton_Release
/var/lib/apt/lists/ubuntu-cloud.archive.canonical.com_ubuntu_dists_xenial-updates_newton_Release.gpg
/var/lib/apt/lists/ubuntu-cloud.archive.canonical.com_ubuntu_dists_xenial-updates_newton_main_binary*Packages

2.2 apt-get update
3. Check the state of the 3 files you deleted.  If you have the _Release file 
but not the _Release.gpg you have recreated the issue.
4. If you have not recreated the issue, continue GOTO 2 and continue to loop.

[Regression Potential] 
Unknown

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.launchpad.net/bugs/1657440

Title:
  apt won't redownload Release.gpg after inconsistent cache updates made
  while UCA is being updated

Status in APT:
  Fix Released
Status in apt package in Ubuntu:
  Fix Released
Status in apt source package in Xenial:
  Triaged
Status in apt source package in Yakkety:
  Triaged

Bug description:
  # apt --version
  apt 1.2.18 (amd64)

  xenial

  
  I got myself into a situation where a repository has a Release and a 
Release.gpg file, but apt is just ignoring the gpg one and won't download it 
via apt update for some reason:

  The repository in question is http://ubuntu-
  cloud.archive.canonical.com/ubuntu/dists/xenial-updates/newton/. See
  how locally I have just the Release file:

  root@juju-cb14ed-0-lxd-3:/var/lib/apt/lists# l *Release*
  -rw-r--r-- 1 root root 100K Jan 15 18:03 
archive.ubuntu.com_ubuntu_dists_xenial-backports_InRelease
  -rw-r--r-- 1 root root 242K Apr 21  2016 
archive.ubuntu.com_ubuntu_dists_xenial_InRelease
  -rw-r--r-- 1 root root 100K Jan 18 11:42 
archive.ubuntu.com_ubuntu_dists_xenial-updates_InRelease
  -rw-r--r-- 1 root root 100K Jan 18 11:42 
security.ubuntu.com_ubuntu_dists_xenial-security_InRelease
  -rw-r--r-- 1 root root 7.7K Jan 18 11:45 
ubuntu-cloud.archive.canonical.com_ubuntu_dists_xenial-updates_newton_Release

  
  Now I try an update. See how the Release.gpg file gets a "Hit:" instead of a 
"Get:":
  root@juju-cb14ed-0-lxd-3:/var/lib/apt/lists# apt update
  Get:1 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
  Hit:2 http://archive.ubuntu.com/ubuntu xenial InRelease   
 
  Ign:3 http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/newton 
InRelease
  Get:4 http://archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]
  Hit:5 http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/newton 
Release
  Get:6 http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/newton 
Release.gpg [543 B]
  Hit:7 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
  Fetched 205 kB in 0s (395 kB/s)   
  Reading package lists... Done
  Building dependency tree   
  Reading state information... Done
  8 packages can be upgraded. Run 'apt list --upgradable' to see them.

  
  And I can't install packages:
  root@juju-cb14ed-0-lxd-3:/var/lib/apt/lists# apt dist-upgrade
  Reading package lists... Done
  Building dependency tree   
  Reading state information... Done
  Calculating upgrade... Done
  The following NEW packages will be installed:
python3-setuptools
  The following packages will be upgraded:
dh-python dnsmasq-base python-pkg-resources python-setuptools 
python3-cryptography python3-pkg-resources python3-requests python3-urllib3
  8 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
  Need to get 1,193 kB of archives.
  After this operation, 808 kB of additional disk space will be used.
  Do you want to continue? [Y/n] 
  WARNING: The following packages cannot be authenticated!
dh-python dnsmasq-base python-setuptools python-pkg-resources 
python3-pkg-resources python3-setuptools python3-cryptography python3-requests 
python3-urllib3
  Install these packages without verification? [y/N] n
  E: Some packages could not be authenticated

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

2017-02-17 Thread André

version 1.4.4-1ubuntu2 (from pre-release and from Barry's ppa) is not
working correctly for me

Can only ping any host by ip and never by hostname (google.com /
sapo.pt)


** Attachment added: "Selection_00553.png"
   
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1647031/+attachment/4821011/+files/Selection_00553.png

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1647031] Re: systemd-resolved’s 127.0.0.53 server does not follow CNAME records

2017-02-17 Thread André

output of

$ systemd-resolve --status

** Attachment added: "Selection_00554.png"
   
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1647031/+attachment/4821012/+files/Selection_00554.png

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031

Title:
  systemd-resolved’s 127.0.0.53 server does not follow CNAME records

Status in systemd:
  New
Status in network-manager package in Ubuntu:
  Fix Released
Status in systemd package in Ubuntu:
  Fix Released

Bug description:
  $ systemd-resolve www.freedesktop.org
  www.freedesktop.org: 131.252.210.176
   2610:10:20:722:a800:ff:feda:470f
   (annarchy.freedesktop.org)

  -- Information acquired via protocol DNS in 673.6ms.
  -- Data is authenticated: no
  $ ping www.freedesktop.org
  ping: www.freedesktop.org: Name or service not known
  $ cat /etc/resolv.conf
  # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
  # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
  # 127.0.0.53 is the systemd-resolved stub resolver.
  # run "systemd-resolve --status" to see details about the actual nameservers.

  nameserver 127.0.0.53
  $ dig +no{cmd,comments,stats} www.freedesktop.org @127.0.0.53
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  7146IN  CNAME   annarchy.freedesktop.org.
  $ dig +no{cmd,comments,stats} www.freedesktop.org @8.8.8.8
  ;www.freedesktop.org. IN  A
  www.freedesktop.org.  14399   IN  CNAME   annarchy.freedesktop.org.
  annarchy.freedesktop.org. 14399   IN  A   131.252.210.176

  I trust it needn’t be explained why this makes the internet almost
  completely useless in zesty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/systemd/+bug/1647031/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665757] Re: package hicolor-icon-theme 0.15-1 failed to install/upgrade: triggers looping, abandoned

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to hicolor-icon-theme in
Ubuntu.
https://bugs.launchpad.net/bugs/1665757

Title:
  package hicolor-icon-theme 0.15-1 failed to install/upgrade: triggers
  looping, abandoned

Status in hicolor-icon-theme package in Ubuntu:
  New

Bug description:
  gave an error while trying to upgrade from 16.04 to 16.10

  ProblemType: Package
  DistroRelease: Ubuntu 16.10
  Package: hicolor-icon-theme 0.15-1
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Uname: Linux 4.8.0-37-generic i686
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: i386
  Date: Fri Feb 17 12:40:55 2017
  Dependencies:
   
  ErrorMessage: triggers looping, abandoned
  InstallationDate: Installed on 2016-01-11 (402 days ago)
  InstallationMedia: Ubuntu-MATE 15.04 "Vivid Vervet" - Release i386 
(20150422.1)
  PackageArchitecture: all
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu1
   apt  1.3.4
  SourcePackage: hicolor-icon-theme
  Title: package hicolor-icon-theme 0.15-1 failed to install/upgrade: triggers 
looping, abandoned
  UpgradeStatus: Upgraded to yakkety on 2017-02-17 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/hicolor-icon-theme/+bug/1665757/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665757] [NEW] package hicolor-icon-theme 0.15-1 failed to install/upgrade: triggers looping, abandoned

2017-02-17 Thread Dylan Livingston

Public bug reported:

gave an error while trying to upgrade from 16.04 to 16.10

ProblemType: Package
DistroRelease: Ubuntu 16.10
Package: hicolor-icon-theme 0.15-1
ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
Uname: Linux 4.8.0-37-generic i686
ApportVersion: 2.20.3-0ubuntu8.2
Architecture: i386
Date: Fri Feb 17 12:40:55 2017
Dependencies:
 
ErrorMessage: triggers looping, abandoned
InstallationDate: Installed on 2016-01-11 (402 days ago)
InstallationMedia: Ubuntu-MATE 15.04 "Vivid Vervet" - Release i386 (20150422.1)
PackageArchitecture: all
RelatedPackageVersions:
 dpkg 1.18.10ubuntu1
 apt  1.3.4
SourcePackage: hicolor-icon-theme
Title: package hicolor-icon-theme 0.15-1 failed to install/upgrade: triggers 
looping, abandoned
UpgradeStatus: Upgraded to yakkety on 2017-02-17 (0 days ago)

** Affects: hicolor-icon-theme (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 need-duplicate-check yakkety

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to hicolor-icon-theme in
Ubuntu.
https://bugs.launchpad.net/bugs/1665757

Title:
  package hicolor-icon-theme 0.15-1 failed to install/upgrade: triggers
  looping, abandoned

Status in hicolor-icon-theme package in Ubuntu:
  New

Bug description:
  gave an error while trying to upgrade from 16.04 to 16.10

  ProblemType: Package
  DistroRelease: Ubuntu 16.10
  Package: hicolor-icon-theme 0.15-1
  ProcVersionSignature: Ubuntu 4.8.0-37.39-generic 4.8.16
  Uname: Linux 4.8.0-37-generic i686
  ApportVersion: 2.20.3-0ubuntu8.2
  Architecture: i386
  Date: Fri Feb 17 12:40:55 2017
  Dependencies:
   
  ErrorMessage: triggers looping, abandoned
  InstallationDate: Installed on 2016-01-11 (402 days ago)
  InstallationMedia: Ubuntu-MATE 15.04 "Vivid Vervet" - Release i386 
(20150422.1)
  PackageArchitecture: all
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu1
   apt  1.3.4
  SourcePackage: hicolor-icon-theme
  Title: package hicolor-icon-theme 0.15-1 failed to install/upgrade: triggers 
looping, abandoned
  UpgradeStatus: Upgraded to yakkety on 2017-02-17 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/hicolor-icon-theme/+bug/1665757/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665753] [NEW] Printer LPD/LPR option not present in Ubuntu 16.04 / 64 bit

2017-02-17 Thread Denville Longhurst

Public bug reported:

This option is required to connect to literally thousands of legacy dot-
matrix and other simple ascii printing devices such as roll printers and
ticket machines, in use for example in airports throughout the world.  I
cannot select LPD/LPR printer any longer in the desktop GUI, and I can't
find if and how to do it from the command line (or even editing a
configuration file).

I have tried various alternatives such as IPP generic text-only but
nothing gets to the printer, typically the spooler reports printer idle
but not ready.  The printers all have basic Centronics parallel
interface, connected to the network using LPD/LPR print servers, not a
chance of changing this infrastructure which has worked flawlessly and
under Windows (even W10) for years.

Thanks.

** Affects: cups (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1665753

Title:
  Printer LPD/LPR option not present in Ubuntu 16.04 / 64 bit

Status in cups package in Ubuntu:
  New

Bug description:
  This option is required to connect to literally thousands of legacy
  dot-matrix and other simple ascii printing devices such as roll
  printers and ticket machines, in use for example in airports
  throughout the world.  I cannot select LPD/LPR printer any longer in
  the desktop GUI, and I can't find if and how to do it from the command
  line (or even editing a configuration file).

  I have tried various alternatives such as IPP generic text-only but
  nothing gets to the printer, typically the spooler reports printer
  idle but not ready.  The printers all have basic Centronics parallel
  interface, connected to the network using LPD/LPR print servers, not a
  chance of changing this infrastructure which has worked flawlessly and
  under Windows (even W10) for years.

  Thanks.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1665753/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665749] [NEW] Hp PSC 1510 not working anymore

2017-02-17 Thread Shannon Kay

Public bug reported:

I'm on 14.04 
I'm fairly new. I feel like I've tried everything! Printer was working last 
week. Now It just says "Held" or pending then disappears with no print. 
I've downloaded the latest drivers. 

Searching on USB bus...
hp-setup[3668]: debug: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 
root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0a5c:2110 Broadcom Corp. BCM2045B (BDC-2) [Bluetooth 
Controller]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

error: No devices found on bus: usb

** Affects: cups (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1665749

Title:
  Hp PSC 1510 not working anymore

Status in cups package in Ubuntu:
  New

Bug description:
  I'm on 14.04 
  I'm fairly new. I feel like I've tried everything! Printer was working last 
week. Now It just says "Held" or pending then disappears with no print. 
  I've downloaded the latest drivers. 

  Searching on USB bus...
  hp-setup[3668]: debug: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 
root hub
  Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 003 Device 002: ID 0a5c:2110 Broadcom Corp. BCM2045B (BDC-2) [Bluetooth 
Controller]
  Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  error: No devices found on bus: usb

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1665749/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1663048] Re: mirclient gets out of sync

Adding snapd task to get the mir-libs content interface auto-connected.

** Also affects: snapd
   Importance: Undecided
   Status: New

** Changed in: snapd
 Assignee: (unassigned) => Michael Terry (mterry)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1663048

Title:
  mirclient gets out of sync

Status in Canonical System Image:
  Confirmed
Status in snapd:
  New
Status in Ubuntu App Platform:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Because we directly include mir client libraries in the platform (due
  to a dependency of qtubuntu), when the mir interface is revised we get
  out of sync. The mir team publishes a mir-libs snap that tracks these
  changes and exposes a mir-libs content interface. We should
  investigate if that can be used transparently by apps connected to the
  platform.

  as of this report they are out of sync.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1663048/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1663048] Re: mirclient gets out of sync

2017-02-17 Thread Pat McGowan

** Changed in: ubuntu-app-platform
   Importance: Undecided => High

** Changed in: ubuntu-app-platform
 Assignee: (unassigned) => Timo Jyrinki (timo-jyrinki)

** Changed in: unity8 (Ubuntu)
   Status: New => In Progress

** Changed in: unity8 (Ubuntu)
   Importance: Undecided => High

** Also affects: canonical-devices-system-image
   Importance: Undecided
   Status: New

** Changed in: canonical-devices-system-image
   Importance: Undecided => High

** Changed in: canonical-devices-system-image
   Status: New => Confirmed

** Changed in: canonical-devices-system-image
 Assignee: (unassigned) => Bill Filler (bfiller)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1663048

Title:
  mirclient gets out of sync

Status in Canonical System Image:
  Confirmed
Status in snapd:
  New
Status in Ubuntu App Platform:
  In Progress
Status in unity8 package in Ubuntu:
  In Progress

Bug description:
  Because we directly include mir client libraries in the platform (due
  to a dependency of qtubuntu), when the mir interface is revised we get
  out of sync. The mir team publishes a mir-libs snap that tracks these
  changes and exposes a mir-libs content interface. We should
  investigate if that can be used transparently by apps connected to the
  platform.

  as of this report they are out of sync.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1663048/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1633828] Re: Mounting /boot/efi fails always after updating to 16.10

2017-02-17 Thread Phillip Susi

Sorry, I've gotten a few hundred messages behind in my bug mail
folder... trying to catch up but it takes a while.

Just to confirm, when you uncomment this line:

# UUID=86E4-0AA9  /boot/efi   vfatumask=0077  0   1

You get a time out looking for that drive?  What does the output of sudo
blkid show?


** Changed in: util-linux (Ubuntu)
   Status: Expired => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to util-linux in Ubuntu.
https://bugs.launchpad.net/bugs/1633828

Title:
  Mounting /boot/efi fails always after updating to 16.10

Status in util-linux package in Ubuntu:
  Incomplete

Bug description:
  System does not boot properly as mounting /boot/efi fails. Commented
  out /boot/efi entry in /etc/fstab to boot system normally. This
  started happening after update to 16.10. Everything was working fine
  in 15.10, 16.04.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.10
  Package: mount 2.28.2-1ubuntu1
  ProcVersionSignature: Ubuntu 4.8.0-22.24-generic 4.8.0
  Uname: Linux 4.8.0-22-generic x86_64
  ApportVersion: 2.20.3-0ubuntu8
  Architecture: amd64
  Date: Sun Oct 16 15:23:19 2016
  InstallationDate: Installed on 2015-11-20 (330 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  SourcePackage: util-linux
  UpgradeStatus: Upgraded to yakkety on 2016-10-15 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/1633828/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1663048] Re: mirclient gets out of sync

There was a meeting today with the Mir team and some stakeholders and I
believe the outcome was that mir-libs will continue to be the only
supported source for Mir libraries.

So we should probably do the following:

- Drop Mir libraries from the ubuntu-app-platform snap.

- Update snapcraft-desktop-helpers to stop including Mir libraries in
consuming snaps and to point at mir-libs's libraries if they are being
used.

- Update all Mir-consuming snaps to plug into mir-libs and to include
the path in their LD_LIBRARY_PATH.  And to remove any accidentally
included duplicate libraries in their own snap.

I'm working on #2 there (snapcraft-desktop-helpers).  I'll add a task
here.  I'll also work on converting the unity8 snap to use mir-libs.

** Also affects: unity8 (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: unity8 (Ubuntu)
 Assignee: (unassigned) => Michael Terry (mterry)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1663048

Title:
  mirclient gets out of sync

Status in Ubuntu App Platform:
  In Progress
Status in unity8 package in Ubuntu:
  New

Bug description:
  Because we directly include mir client libraries in the platform (due
  to a dependency of qtubuntu), when the mir interface is revised we get
  out of sync. The mir team publishes a mir-libs snap that tracks these
  changes and exposes a mir-libs content interface. We should
  investigate if that can be used transparently by apps connected to the
  platform.

  as of this report they are out of sync.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-app-platform/+bug/1663048/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665018] Re: client tools ignore -h option without port number

2017-02-17 Thread Brian Murray

Hello Dariusz, or anyone else affected,

Accepted cups into trusty-proposed. The package will build now and be
available at https://launchpad.net/ubuntu/+source/cups/1.7.2-0ubuntu1.8
in a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, and change the tag
from verification-needed to verification-done. If it does not fix the
bug for you, please add a comment stating that, and change the tag to
verification-failed.  In either case, details of your testing will help
us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: cups (Ubuntu Trusty)
   Status: New => Fix Committed

** Tags added: verification-needed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1665018

Title:
  client tools ignore -h option without port number

Status in cups package in Ubuntu:
  New
Status in cups source package in Trusty:
  Fix Committed

Bug description:
  [Impact]
  Prevents user from overriding default print server on cmdline if he's not 
aware of the fact that this bug may be overriden by giving a port number.

  [Test Case]
  1. Setup 2 cups servers with a shared printer set as default destination: 
server1, server2.
  2. On a trusty client try:
  export CUPS_SERVER=server1
  lpstat -h server2 -H
  3. Expected result:
  server2:631
  4. Actual result:
  server1:631
  (server given by CUPS_SERVER is used instead of the one given by -h option).

  [Regression Potential]
  Minimal. ipp_port is initialized to default value if not given explicitly. 
Fix is a backport from Xenial version and already present in upstream release.

  [Other Info]
   
  * Original bug description:

  Some commandline tools (e.g. lp, lpstat) ignore -h option if no port number 
is given.
  This version affects Trusty with cups-client 1.7.2-0ubuntu1.7. Xenial works 
fine.

  Test to reproduce:
  1. Setup 2 cups servers with a shared printer set as default destination: 
server1, server2.
  2. On a trusty client try:
  export CUPS_SERVER=server1
  lpstat -h server2 -H

  3. Expected result:
  server2:631

  4. Actual result:
  server1:631
  (server given by CUPS_SERVER is used instead of the one given by -h option).

  If a port number is given (e.g. server2:631) the commands work as
  expected.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1665018/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665653] Re: lsb_release -d should show a hint if it uses HWE or not

2017-02-17 Thread Steve Langasek

But /etc/lsb-release is a static file, which isn't going to be different
depending on which hardware enablement stack you're running.  So I'm
afraid I don't see any practical way to fix this.

I also don't think 'lsb_release' is the expected interface to tell you
the answer to this question fwiw.

** Changed in: base-files (Ubuntu)
   Status: Confirmed => Won't Fix

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to base-files in Ubuntu.
https://bugs.launchpad.net/bugs/1665653

Title:
  lsb_release -d should show a hint if it uses HWE or not

Status in base-files package in Ubuntu:
  Won't Fix

Bug description:
  The output of "lsb_release -d" does not show clearly if it really uses
  the HWE.

  Now it's shown 
  -
  Description: Ubuntu 16.04.2 LTS
  -
  and nobody knows if it uses really the XX.04.2 stack.

  
  I suggest to change the output to something like this:
  -
  Description: Ubuntu 16.04.2 LTS (HWE)
  -
  Description: Ubuntu 16.04.2 LTS (GA)
  -

  In the first case the system uses kernel 4.8 and its corrisponding Xserver.
  In the second case the system uses kernel 4.4 and Xserver 1.18.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/1665653/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1661371] Re: [zesty] doesn't offer a window to install missing gstreamer codecs

2017-02-17 Thread Pojar Gheorghe–Ioan

gst_discoverer_info_get_misc doesn't work:
https://bugzilla.gnome.org/show_bug.cgi?id=770643

** No longer affects: sessioninstaller

** Also affects: gst-plugins-base1.0 (Ubuntu)
   Importance: Undecided
   Status: New

** No longer affects: sessioninstaller (Ubuntu)

** Also affects: gst-plugins-base via
   https://bugzilla.gnome.org/show_bug.cgi?id=770643
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gst-plugins-base1.0 in
Ubuntu.
https://bugs.launchpad.net/bugs/1661371

Title:
  [zesty] doesn't offer a window to install missing gstreamer codecs

Status in gst-plugins-base:
  Unknown
Status in gst-plugins-base1.0 package in Ubuntu:
  New

Bug description:
  Attempting to play a mp3 file with Rhythmbox on the latest Zesty daily
  build

  Rhythmbox opens but no playback start.
  On the terminal I got this:

  Rhythmbox-Message: Missing plugin: gstreamer|1.0|rhythmbox-metadata|MPEG-1 
Layer 3 (MP3) decoder|decoder-audio/mpeg, mpegversion=(int)1, 
mpegaudioversion=(int)1, layer=(int)3
  /usr/lib/python3/dist-packages/sessioninstaller/core.py:47: PyGIWarning: Gst 
was imported without specifying a version first. Use gi.require_version('Gst', 
'1.0') before import to ensure that the right version gets loaded.
from gi.repository import Gst
  /usr/lib/python3/dist-packages/sessioninstaller/core.py:48: PyGIWarning: Gtk 
was imported without specifying a version first. Use gi.require_version('Gtk', 
'3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk
  Falling back to package information
  Rhythmbox-Message: Missing plugins installed. Updating plugin registry ...

  But the wizard to install the missing codec actually fails to launch.

To manage notifications about this bug go to:
https://bugs.launchpad.net/gst-plugins-base/+bug/1661371/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1607390] Re: serious bug on bluetooth (Ubuntu 16.04 LTS)

2017-02-17 Thread Sébastien Wertz

Anything new on this? It seems like it's still present on kernel
4.8.9...

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1607390

Title:
  serious bug on bluetooth (Ubuntu 16.04 LTS)

Status in bluez package in Ubuntu:
  Confirmed

Bug description:
  I've recently installed ubuntu 16.04 LTS twice -and i discovered that
  the problem was from the tool katoolin so i didn't install it- after i
  installed ubuntu the bluetooth didn't work for me.

  P.S:the bluetooth was working when my laptop was ubuntu 15.04

  when i turn bluetooth on to connect my mouse the switch was on but it
  said that

  Bluetooth is disabled

  i entered the command

  sudo rfkill unblock bluetooth

  it worked but didn't connect to the mouse even after the next restart
  i also tried to editing the file /etc/rc.local (putting sudo rfkill unblock 
bluetooth before last line and restarting)

  and i've tried **sudo hciconfig hci0 reset** with output

  > Can't init device hci0: Connection timed out (110)

  my lsusb; rfkill list output:

  Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 001 Device 004: ID 1bcf:2883 Sunplus Innovation Technology Inc.
  Bus 001 Device 014: ID 04ca:3005 Lite-On Technology Corp.
  Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 003 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Keyboard
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  0: asus-wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
   1: asus-bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
   11: hci0: Bluetooth
    Soft blocked: no
   Hard blocked: no

  and output of **dmesg | grep -Ei 'ath3k|blue'**

  [1.727681] usb 1-1.1: Product: Bluetooth USB Host Controller
  [   34.157120] Bluetooth: Core ver 2.21
  [   34.157135] Bluetooth: HCI device and connection manager initialized
  [   34.157138] Bluetooth: HCI socket layer initialized
  [   34.157140] Bluetooth: L2CAP socket layer initialized
  [   34.157145] Bluetooth: SCO socket layer initialized
  [   35.604410] usbcore: registered new interface driver ath3k
  [   51.744300] usb 1-1.1: Product: Bluetooth USB Host Controller
  [   53.810045] Bluetooth: hci0 command 0x0c25 tx timeout
  [   55.814079] Bluetooth: hci0 command 0x0c38 tx timeout
  [   57.818111] Bluetooth: hci0 command 0x0c39 tx timeout
  [   59.822149] Bluetooth: hci0 command 0x0c05 tx timeout
  [   66.997548] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  [   66.997552] Bluetooth: BNEP filters: protocol multicast
  [   66.997556] Bluetooth: BNEP socket layer initialized
  [  195.105902] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  195.328480] Bluetooth: RFCOMM TTY layer initialized
  [  195.328488] Bluetooth: RFCOMM socket layer initialized
  [  195.328495] Bluetooth: RFCOMM ver 1.11
  [  199.131870] Bluetooth: hci0 command 0x1009 tx timeout
  [  276.169130] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  294.258992] Bluetooth: hci0 command 0x1005 tx timeout
  [  296.263065] Bluetooth: hci0 command 0x0c23 tx timeout
  [  298.267076] Bluetooth: hci0 command 0x0c14 tx timeout
  [  306.361529] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  346.417970] Bluetooth: hci0 command 0x0c56 tx timeout
  [  348.421916] Bluetooth: hci0 command 0x0c45 tx timeout
  [  350.425782] Bluetooth: hci0 command 0x0c58 tx timeout
  [  352.429744] Bluetooth: hci0 command 0x1004 tx timeout
  [  366.099802] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  368.145218] Bluetooth: hci0 command 0x1001 tx timeout
  [  370.149130] Bluetooth: hci0 command 0x1009 tx timeout
  [  410.346611] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  421.612041] Bluetooth: hci0 command 0x0c23 tx timeout
  [  423.616060] Bluetooth: hci0 command 0x0c14 tx timeout
  [  425.620018] Bluetooth: hci0 command 0x0c25 tx timeout
  [  427.623984] Bluetooth: hci0 command 0x0c38 tx timeout
  [  442.650168] usb 1-1.1: Product: Bluetooth USB Host Controller
  [  444.727752] Bluetooth: hci0 command 0x0c52 tx timeout
  [  446.731800] Bluetooth: hci0 command 0x0c45 tx timeout
  [  448.735743] Bluetooth: hci0 command 0x0c58 tx timeout
  [  450.739762] Bluetooth: hci0 command 0x1004 tx timeout
  [ 4000.639722] usb 1-1.1: Product: Bluetooth USB Host Controller
  [ 4011.801141] Bluetooth: hci0 command 0x2002 tx timeout
  [ 4013.805106] Bluetooth: hci0 command 0x2003 tx timeout

[Touch-packages] [Bug 1655782] Re: Elfdalian layout + merge with Debian 2.19-1

2017-02-17 Thread Gunnar Hjalmarsson

I think and hope so, Henning. It would have been in already if I hadn't
made a couple of stupid mistakes when preparing the proposed upload.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xkeyboard-config in
Ubuntu.
https://bugs.launchpad.net/bugs/1655782

Title:
  Elfdalian layout + merge with Debian 2.19-1

Status in xkeyboard-config:
  Unknown
Status in xkeyboard-config package in Ubuntu:
  In Progress

Bug description:
  Please add the Elfdalian keyboard layout which has been added upstream
  (see the Freedesktop bug report).

  I also propose that we take this opportunity to merge with Debian
  xkeyboard-config 2.19-1.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xkeyboard-config/+bug/1655782/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665724] Re: Child window leaving fullscreen when move mouse to bottom right corner of screen

see attached video for example

** Attachment added: "File Feb 17, 1 08 30 PM.mov"
   
https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1665724/+attachment/4820952/+files/File%20Feb%2017%2C%201%2008%2030%20PM.mov

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1665724

Title:
  Child window leaving fullscreen when move mouse to bottom right corner
  of screen

Status in qtmir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New
Status in webbrowser-app package in Ubuntu:
  New

Bug description:
  running unity8 desktop deb session on xenial + overlay

  - Launcher set to always show
  1) open youtube.com in webbrowser-app
  2) maximize browser
  3) play a video 
  4) click the fullscreen button on bottom right, video now playing in 
fullscreen mode
  5) move mouse cursor to bottom right of screen, 
  6) Expected result: no change in window. 

  Actual result: 
  window leaves fullscreen mode, shows window controls and black border where 
launcher usually is, bottom of window is cutoff. Stuck in this state until you 
press esc, which then causes parent browser window to be obscured by launcher 
again (see lp:1665723)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtmir/+bug/1665724/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665723] Re: Maximized window hidden under launcher after exit fullscreen

Same problem occurs, after exiting child window fullscreen:
- Launcher set to always show
1) open youtube.com
2) maximize browser window
3) play a video, and press the fullscreen button
4) press esc, F11 or click the fullscreen button in bottom right to exit 
fullscreen
5) Expected result: parent window is still maximized and not obscured by 
launcher. Actual result: parent window maximized but obscured by launcher 


** Also affects: qtmir (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: qtmir (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1665723

Title:
  Maximized window hidden under launcher after exit fullscreen

Status in qtmir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  Running unity8 deb session on xenial + overlay

  Steps to reproduce
  1) Launcher set for always show
  2) start webbrowser-app, maximize browser with window control, note that 
browser is not obscured at all by launcher
  3) press F11 to go full screen, window correctly goes fullscreen
  4) press F11 to exit full screen, 
  5) Expected results: window should be maximized but not obscured by launcher. 
Actual results: window is maximized bu obscured by launcher

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtmir/+bug/1665723/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665724] [NEW] Child window leaving fullscreen when move mouse to bottom right corner of screen

Public bug reported:

running unity8 desktop deb session on xenial + overlay

- Launcher set to always show
1) open youtube.com in webbrowser-app
2) maximize browser
3) play a video 
4) click the fullscreen button on bottom right, video now playing in fullscreen 
mode
5) move mouse cursor to bottom right of screen, 
6) Expected result: no change in window. 

Actual result: 
window leaves fullscreen mode, shows window controls and black border where 
launcher usually is, bottom of window is cutoff. Stuck in this state until you 
press esc, which then causes parent browser window to be obscured by launcher 
again (see lp:1665723)

** Affects: qtmir (Ubuntu)
 Importance: High
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: High
 Status: New

** Affects: webbrowser-app (Ubuntu)
 Importance: High
 Status: New

** Also affects: qtmir (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: qtmir (Ubuntu)
   Importance: Undecided => High

** Changed in: unity8 (Ubuntu)
   Importance: Undecided => High

** Also affects: webbrowser-app (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: webbrowser-app (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1665724

Title:
  Child window leaving fullscreen when move mouse to bottom right corner
  of screen

Status in qtmir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New
Status in webbrowser-app package in Ubuntu:
  New

Bug description:
  running unity8 desktop deb session on xenial + overlay

  - Launcher set to always show
  1) open youtube.com in webbrowser-app
  2) maximize browser
  3) play a video 
  4) click the fullscreen button on bottom right, video now playing in 
fullscreen mode
  5) move mouse cursor to bottom right of screen, 
  6) Expected result: no change in window. 

  Actual result: 
  window leaves fullscreen mode, shows window controls and black border where 
launcher usually is, bottom of window is cutoff. Stuck in this state until you 
press esc, which then causes parent browser window to be obscured by launcher 
again (see lp:1665723)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtmir/+bug/1665724/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665723] [NEW] Maximized window hidden under launcher after exit fullscreen

Public bug reported:

Running unity8 deb session on xenial + overlay

Steps to reproduce
1) Launcher set for always show
2) start webbrowser-app, maximize browser with window control, note that 
browser is not obscured at all by launcher
3) press F11 to go full screen, window correctly goes fullscreen
4) press F11 to exit full screen, 
5) Expected results: window should be maximized but not obscured by launcher. 
Actual results: window is maximized bu obscured by launcher

** Affects: qtmir (Ubuntu)
 Importance: High
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: High
 Status: New

** Changed in: unity8 (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1665723

Title:
  Maximized window hidden under launcher after exit fullscreen

Status in qtmir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  Running unity8 deb session on xenial + overlay

  Steps to reproduce
  1) Launcher set for always show
  2) start webbrowser-app, maximize browser with window control, note that 
browser is not obscured at all by launcher
  3) press F11 to go full screen, window correctly goes fullscreen
  4) press F11 to exit full screen, 
  5) Expected results: window should be maximized but not obscured by launcher. 
Actual results: window is maximized bu obscured by launcher

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtmir/+bug/1665723/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665726] [NEW] MouseArea too close to the top indicators bar cannot be activated by touch

2017-02-17 Thread Olivier Tilloy

Public bug reported:

I’m testing the browser with redesigned tabs bar on M10, and I can’t
activate any tab. The new tabs bar is 3GU tall, if I increase its height
I’m able to activate the bottom half of the tabs.

Also, if I plug in a bluetooth mouse so that the app gets windowed, I
have no problems activating the tabs.

It looks like a mouse area at the top of a maximized window, too close
to the indicators bar, is not activatable. As if the indicators bar
itself was swallowing touch/click events just below itself.

I’ve been able to confirm with a simple standalone QML scene with a thin
MouseArea at the top of the scene. If I make it thin enough (3GU or
less), it’s impossible to activate by touching it.

This is on M10 running arm64 xenial (revision 147) from the ubuntu-
touch/staging/ubuntu channel.

** Affects: qtmir (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: unity8 (Ubuntu)
 Importance: Undecided
 Status: New

** Description changed:

  I’m testing the browser with redesigned tabs bar on M10, and I can’t
  activate any tab. The new tabs bar is 3GU tall, if I increase its height
  I’m able to activate the bottom half of the tabs.
  
  Also, if I plug in a bluetooth mouse so that the app gets windowed, I
  have no problems activating the tabs.
  
  It looks like a mouse area at the top of a maximized window, too close
  to the indicators bar, is not activatable. As if the indicators bar
  itself was swallowing touch/click events just below itself.
  
  I’ve been able to confirm with a simple standalone QML scene with a thin
  MouseArea at the top of the scene. If I make it thin enough (3GU or
  less), it’s impossible to activate by touching it.
+ 
+ This is on M10 running arm64 xenial (revision 147) from the ubuntu-
+ touch/staging/ubuntu channel.

** Also affects: qtmir (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1665726

Title:
  MouseArea too close to the top indicators bar cannot be activated by
  touch

Status in qtmir package in Ubuntu:
  New
Status in unity8 package in Ubuntu:
  New

Bug description:
  I’m testing the browser with redesigned tabs bar on M10, and I can’t
  activate any tab. The new tabs bar is 3GU tall, if I increase its
  height I’m able to activate the bottom half of the tabs.

  Also, if I plug in a bluetooth mouse so that the app gets windowed, I
  have no problems activating the tabs.

  It looks like a mouse area at the top of a maximized window, too close
  to the indicators bar, is not activatable. As if the indicators bar
  itself was swallowing touch/click events just below itself.

  I’ve been able to confirm with a simple standalone QML scene with a
  thin MouseArea at the top of the scene. If I make it thin enough (3GU
  or less), it’s impossible to activate by touching it.

  This is on M10 running arm64 xenial (revision 147) from the ubuntu-
  touch/staging/ubuntu channel.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtmir/+bug/1665726/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665727] [NEW] Window stuck in fullscreen mode

Public bug reported:

Tested in unity8 deb session on xenial + overlay

- Launcher set to always show in system-settings
1) open youtube.com
2) F11 to fullscreen browser
3) play a video
4) click fullscreen button to fullscreen video
5) press esc, F11 or click the fullscreen button in bottom right to exist 
fullscreen
6) Expected result: browser window still fullscreen, but esc or F11 should 
exist fullscreen 

Actual result: browser window stuck in fullscreen, no way to exit it

** Affects: webbrowser-app (Ubuntu)
 Importance: High
 Status: New

** Changed in: webbrowser-app (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1665727

Title:
  Window stuck in fullscreen mode

Status in webbrowser-app package in Ubuntu:
  New

Bug description:
  Tested in unity8 deb session on xenial + overlay

  - Launcher set to always show in system-settings
  1) open youtube.com
  2) F11 to fullscreen browser
  3) play a video
  4) click fullscreen button to fullscreen video
  5) press esc, F11 or click the fullscreen button in bottom right to exist 
fullscreen
  6) Expected result: browser window still fullscreen, but esc or F11 should 
exist fullscreen 

  Actual result: browser window stuck in fullscreen, no way to exit it

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1665727/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1646956] Comment bridged from LTC Bugzilla

2017-02-17 Thread bugproxy

--- Comment From ru...@us.ibm.com 2017-02-17 12:34 EDT---
Hello Canonical.

May we please have a status update for this bug?

Thanks.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iputils in Ubuntu.
https://bugs.launchpad.net/bugs/1646956

Title:
  ping -I support broken in yakkety version 3:20150815-2ubuntu3
  (multicast test failure)

Status in iputils package in Ubuntu:
  New

Bug description:
  == Comment: #0 - HARSHA THYAGARAJA - 2016-11-15 03:42:59 ==
  ---Problem Description---
  Multicast failing for Shiner interface on Ubuntu 16.10 (bnx2x)
   
  Machine Type = S822l1 
   
  ---Steps to Reproduce---
   On Host:  Enable multicast for the test interface
  1. echo 0 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
  2. ip link set enP5p1s0f1 allmulticast on
  root@ltciofvtr-s822l1:~# ifconfig enP5p1s0f1
  enP5p1s0f1: flags=4675  mtu 1500
  inet 170.1.1.20  netmask 255.255.255.0  broadcast 170.1.1.255
  inet6 fe80::9abe:94ff:fe5c:f1c1  prefixlen 64  scopeid 0x20
  ether 98:be:94:5c:f1:c1  txqueuelen 1000  (Ethernet)
  RX packets 488  bytes 50254 (50.2 KB)
  RX errors 0  dropped 442  overruns 0  frame 0
  TX packets 25  bytes 2226 (2.2 KB)
  TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
  device interrupt 226  memory 0x3d400100-3d40017f 


  On Peer: --> catch the Test interface from the multicast group
  ping 224.0.0.1 -I enP4p1s0f2 | grep 170.1.1.20

   
  ---uname output---
  Linux ltciofvtr-s822l1 4.8.0-27-generic #29-Ubuntu SMP Thu Oct 20 21:01:16 
UTC 2016 ppc64le ppc64le ppc64le GNU/Linux
   
  == Comment: #9 - Kevin W. Rudd - 2016-11-28 15:40:24 ==

  I'm able to replicate this behavior in a KVM environment with Yakkety,
  so it does not appear to be related to the specific type of interface.

  From my testing, it looks like the SO_BINDTODEVICE option is not being
  honored, so both broadcasts and multicasts are going out the default
  route device instead of the device specified by -I option to ping.

  I am unable to replicate this on a xenial host with the same 4.8.0-27
  kernel version. so I suspect some other setting is interfering with
  the ability to bind the output to a specific device.

  From my own testing:

  Xenial:

  # ip addr show
  1: lo:  mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  inet 127.0.0.1/8 scope host lo
 valid_lft forever preferred_lft forever
  inet6 ::1/128 scope host 
 valid_lft forever preferred_lft forever
  2: enp0s6:  mtu 1500 qdisc pfifo_fast state 
UP group default qlen 1000
  link/ether 52:54:00:15:b7:ba brd ff:ff:ff:ff:ff:ff
  inet 10.168.122.139/24 brd 10.168.122.255 scope global enp0s6
 valid_lft forever preferred_lft forever
  inet6 fe80::5054:ff:fe15:b7ba/64 scope link 
 valid_lft forever preferred_lft forever
  3: enp0s1:  mtu 1500 qdisc pfifo_fast state 
UP group default qlen 1000
  link/ether 52:54:00:e1:35:be brd ff:ff:ff:ff:ff:ff
  inet 192.168.122.139/24 brd 192.168.122.255 scope global enp0s1
 valid_lft forever preferred_lft forever
  inet6 fe80::5054:ff:fee1:35be/64 scope link 
 valid_lft forever preferred_lft forever

  # ping -I enp0s6 -i 30 224.0.0.1
  PING 224.0.0.1 (224.0.0.1) from 10.168.122.139 enp0s6: 56(84) bytes of data.
  64 bytes from 10.168.122.139: icmp_seq=1 ttl=64 time=0.063 ms
  64 bytes from 10.168.122.100: icmp_seq=1 ttl=64 time=0.435 ms (DUP!)
  ^C
  ...

  Yakkety:

  # ip addr show
  1: lo:  mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  inet 127.0.0.1/8 scope host lo
 valid_lft forever preferred_lft forever
  inet6 ::1/128 scope host 
 valid_lft forever preferred_lft forever
  2: enp0s5:  mtu 1500 qdisc pfifo_fast state 
UP group default qlen 1000
  link/ether 52:54:00:be:97:ab brd ff:ff:ff:ff:ff:ff
  inet 10.168.122.100/24 brd 10.168.122.255 scope global enp0s5
 valid_lft forever preferred_lft forever
  inet6 fe80::5054:ff:febe:97ab/64 scope link 
 valid_lft forever preferred_lft forever
  3: enp0s1:  mtu 1500 qdisc pfifo_fast state 
UP group default qlen 1000
  link/ether 52:54:00:30:d0:14 brd ff:ff:ff:ff:ff:ff
  inet 192.168.122.100/24 brd 192.168.122.255 scope global enp0s1
 valid_lft forever preferred_lft forever
  inet6 fe80::5054:ff:fe30:d014/64 scope link 
 valid_lft forever preferred_lft forever

  # ping -I enp0s5 -i 30 224.0.0.1
  PING 224.0.0.1 (224.0.0.1) from 10.168.122.100 enp0s5: 56(84) bytes of data.
  64 bytes from

[Touch-packages] [Bug 1655782] Re: Elfdalian layout + merge with Debian 2.19-1

2017-02-17 Thread Henning

Will this update be in zesty?

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xkeyboard-config in
Ubuntu.
https://bugs.launchpad.net/bugs/1655782

Title:
  Elfdalian layout + merge with Debian 2.19-1

Status in xkeyboard-config:
  Unknown
Status in xkeyboard-config package in Ubuntu:
  In Progress

Bug description:
  Please add the Elfdalian keyboard layout which has been added upstream
  (see the Freedesktop bug report).

  I also propose that we take this opportunity to merge with Debian
  xkeyboard-config 2.19-1.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xkeyboard-config/+bug/1655782/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665653] Re: lsb_release -d should show a hint if it uses HWE or not

2017-02-17 Thread Brian Murray

lsb_release parses /etc/lsb-release which is provided by the base-files
package.

** Package changed: lsb (Ubuntu) => base-files (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to base-files in Ubuntu.
https://bugs.launchpad.net/bugs/1665653

Title:
  lsb_release -d should show a hint if it uses HWE or not

Status in base-files package in Ubuntu:
  Confirmed

Bug description:
  The output of "lsb_release -d" does not show clearly if it really uses
  the HWE.

  Now it's shown 
  -
  Description: Ubuntu 16.04.2 LTS
  -
  and nobody knows if it uses really the XX.04.2 stack.

  
  I suggest to change the output to something like this:
  -
  Description: Ubuntu 16.04.2 LTS (HWE)
  -
  Description: Ubuntu 16.04.2 LTS (GA)
  -

  In the first case the system uses kernel 4.8 and its corrisponding Xserver.
  In the second case the system uses kernel 4.4 and Xserver 1.18.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/1665653/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1622575] Re: System hangs randomly (log shows 'EQ overflowing').

If you are still experiencing this bug, please set status back to
"confirmed".

** Changed in: xorg (Ubuntu)
   Importance: Undecided => Critical

** Changed in: xorg (Ubuntu)
   Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1622575

Title:
  System hangs randomly (log shows 'EQ overflowing').

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  X Server and then system freezes, ALT+CTRL+Fx doesn't work, sometimes even 
REISUB doesn't work.
  Memtest result is ok, no errors. HDD also is ok. Windows works perfectly on 
the machine.
  It's possible to login via SSH and reboot (but during reboot process it also 
often hangs completely).
  The problem occures randomly during every-day work (usually once or twice a 
day making me loose my work!), like with totally no adequate reasons.
  I'm using AMD Athlon 5350 (SocketAM1 APU) with radeon R3 integrated video.
  My operating system is Ubuntu 16.04.1 LTS with all the last available 
updates. Bug lasts throughout all the time. Tried to reinstall many times 
(MD5sum of the installation image was correct) - nothing changes.

  x-0.log in the attachment

  part of the log:
  (EE) [mi] EQ overflowing.  Additional events will be discarded until existing 
events are processed.
  (EE) 
  (EE) Backtrace:
  (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e) [0x562fc426a5ce]
  (EE) 1: /usr/lib/xorg/Xorg (mieqEnqueue+0x253) [0x562fc424c083]
  (EE) 2: /usr/lib/xorg/Xorg (QueuePointerEvents+0x52) [0x562fc4124662]
  (EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f7320d91000+0x61f3) 
[0x7f7320d971f3]
  (EE) 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f7320d91000+0x6a5d) 
[0x7f7320d97a5d]
  (EE) 5: /usr/lib/xorg/Xorg (0x562fc40b8000+0x94228) [0x562fc414c228]
  (EE) 6: /usr/lib/xorg/Xorg (0x562fc40b8000+0xb96f2) [0x562fc41716f2]
  (EE) 7: /lib/x86_64-linux-gnu/libc.so.6 (0x7f732524e000+0x354a0) 
[0x7f73252834a0]
  (EE) 8: /lib/x86_64-linux-gnu/libpthread.so.0 (pthread_cond_wait+0xbe) 
[0x7f732503e39e]
  (EE) 9: /usr/lib/x86_64-linux-gnu/dri/radeonsi_dri.so 
(0x7f731ec4b000+0x6b77fb) [0x7f731f3027fb]
  (EE) 10: /usr/lib/x86_64-linux-gnu/dri/radeonsi_dri.so 
(0x7f731ec4b000+0x6b87c1) [0x7f731f3037c1]
  (EE) 11: /usr/lib/x86_64-linux-gnu/dri/radeonsi_dri.so 
(0x7f731ec4b000+0x61bf52) [0x7f731f266f52]
  (EE) 12: /usr/lib/x86_64-linux-gnu/dri/radeonsi_dri.so 
(0x7f731ec4b000+0x6d521e) [0x7f731f32021e]
  (EE) 13: /usr/lib/x86_64-linux-gnu/dri/radeonsi_dri.so 
(0x7f731ec4b000+0x201de4) [0x7f731ee4cde4]
  (EE) 14: /usr/lib/xorg/modules/libglamoregl.so (glamor_block_handler+0x4b) 
[0x7f73204bcffb]
  (EE) 15: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7f732133c000+0x471b2) 
[0x7f73213831b2]
  (EE) 16: /usr/lib/xorg/Xorg (_CallCallbacks+0x34) [0x562fc4111034]
  (EE) 17: /usr/lib/xorg/Xorg (WriteToClient+0x244) [0x562fc426e234]
  (EE) 18: /usr/lib/xorg/Xorg (WriteEventsToClient+0x1e2) [0x562fc4117022]
  (EE) 19: /usr/lib/xorg/Xorg (0x562fc40b8000+0x133b5f) [0x562fc41ebb5f]
  (EE) 20: /usr/lib/xorg/Xorg (DamageReportDamage+0x89) [0x562fc41f1359]
  (EE) 21: /usr/lib/xorg/Xorg (0x562fc40b8000+0x139c1a) [0x562fc41f1c1a]
  (EE) 22: /usr/lib/xorg/Xorg (0x562fc40b8000+0x13d140) [0x562fc41f5140]
  (EE) 23: /usr/lib/xorg/Xorg (0x562fc40b8000+0x4fb87) [0x562fc4107b87]
  (EE) 24: /usr/lib/xorg/Xorg (0x562fc40b8000+0x53bbf) [0x562fc410bbbf]
  (EE) 25: /usr/lib/xorg/Xorg (0x562fc40b8000+0x57c33) [0x562fc410fc33]
  (EE) 26: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf0) 
[0x7f732526e830]
  (EE) 27: /usr/lib/xorg/Xorg (_start+0x29) [0x562fc40f9f59]
  (EE) 
  (EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up 
the stack.
  (EE) [mi] mieq is *NOT* the cause.  It is a victim.
  (EE) [mi] EQ overflow continuing.  100 events have been dropped.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16
  Uname: Linux 4.4.0-36-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Mon Sep 12 14:31:34 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 5.0.24, 4.4.0-34-generic, x86_64: installed
   virtualbox, 5.0.24, 4.4.0-36-generic, x86_64: installed
  ExtraDebuggingInterest: No
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8400 / R3 Series] 
[1002:9830] (prog-if 00 [VGA controller])
 Subsystem: Micro-Star International Co., Ltd. [MSI] Kabini [Radeon HD 8400 
/ R3 Series] [1462:7865]
  InstallationDate: Installed on

[Touch-packages] [Bug 1590561] Re: webbrowser-app crashes on startup on fresh zesty Unity8: No suitable EGL configs found

2017-02-17 Thread Ilija Ćosić

@Santosh

Now it works!


Output:

unity::action::ActionManager::ActionManager(QObject*):
Could not determine application identifier. HUD will not work properly.
Provide your application identifier in $APP_ID environment variable.
UCUriHandler: Empty "APP_ID" environment variable, ignoring.
file:///usr/share/webbrowser-app/webbrowser/ContentPickerDialog.qml:22:1: 
module "Ubuntu.Content" is not installed
file:///usr/share/webbrowser-app/webbrowser/ContentDownloadDialog.qml:22:1: 
module "Ubuntu.Content" is not installed
file:///usr/share/webbrowser-app/ContentHandler.qml:20:1: module 
"Ubuntu.Content" is not installed
file:///usr/share/webbrowser-app/webbrowser/DownloadHandler.qml:20:1: module 
"Ubuntu.DownloadManager" is not installed

qml: Loaded 8 UA override(s) from 
file:///usr/lib/x86_64-linux-gnu/qt5/qml/Ubuntu/Web/ua-overrides-desktop.js
OxideQQuickWebView: canGoForward is deprecated. Please use the API provided by 
OxideQQuickNavigationHistory instead
OxideQQuickWebView: canGoBack is deprecated. Please use the API provided by 
OxideQQuickNavigationHistory instead
TouchSelectionController::active is deprecated, use 
TouchSelectionController::status instead
file:///usr/share/webbrowser-app/Downloader.qml:22:1: module 
"Ubuntu.DownloadManager" is not installed
file:///usr/share/webbrowser-app/Downloader.qml:23:1: module "Ubuntu.Content" 
is not installed
file:///usr/share/webbrowser-app/Downloader.qml:22:1: module 
"Ubuntu.DownloadManager" is not installed
file:///usr/share/webbrowser-app/Downloader.qml:23:1: module "Ubuntu.Content" 
is not installed
qml: System low on memory, but unable to pick a tab to unload
[PERFORMANCE]: Last frame took 545 ms to render.
[0217/181627.074883:ERROR:layer_tree_host_impl.cc(2174)] Forcing zero-copy tile 
initialization as worker context is missing

** (webbrowser-app:11243): WARNING **: Unable to register app: 
GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: Invalid application ID
qml: System low on memory, but unable to pick a tab to unload

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to webbrowser-app in Ubuntu.
https://bugs.launchpad.net/bugs/1590561

Title:
  webbrowser-app crashes on startup on fresh zesty Unity8: No suitable
  EGL configs found

Status in Canonical System Image:
  Confirmed
Status in Oxide:
  Confirmed
Status in webbrowser-app package in Ubuntu:
  Invalid

Bug description:
  When trying to start webbrowser-app a unresponsive window appears and
  after a few moments it crashes.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: webbrowser-app 0.23+16.04.20160413-0ubuntu1
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Jun  8 22:56:35 2016
  InstallationDate: Installed on 2016-04-28 (41 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  SourcePackage: webbrowser-app
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1590561/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1630884] Re: Xorg freeze; mouse moves, but no mouse click or keyboard response

** Changed in: xorg (Ubuntu)
   Importance: Undecided => Critical

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1630884

Title:
  Xorg freeze; mouse moves, but no mouse click or keyboard response

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  I've encountered this issue on several fresh installations of Ubuntu
  16.04.1 on different machines. Typically, the machine becomes
  unresponsive to the keyboard presses or to mouse clicks; however, it
  does respond to mouse movement. I am unable to open a text console to
  manipulate processes, and I am forced to hard restart the machine.
  During the most recent instance, I noticed that the mouse cursor would
  change in response to its location on the screen while

  The issue most often occurs about 3-5 minutes after Chromium has been
  opened, but it has also occurred without Chromium being installed.
  Moreover, it as occurred while using Xfce and GNOME 3 and while using
  open source and proprietary video drivers.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-38.57-generic 4.4.19
  Uname: Linux 4.4.0-38-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  CurrentDesktop: GNOME
  Date: Thu Oct  6 00:04:47 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GpuHangFrequency: Several times a day
  GpuHangReproducibility: Occurs more often under certain circumstances
  GpuHangStarted: Immediately after installing this version of Ubuntu
  GraphicsCard:
   NVIDIA Corporation GF119M [NVS 4200M] [10de:1056] (rev a1) (prog-if 00 [VGA 
controller])
 Subsystem: Dell GF119M [NVS 4200M] [1028:0493]
  InstallationDate: Installed on 2016-10-06 (0 days ago)
  InstallationMedia: Ubuntu-Server 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  MachineType: Dell Inc. Latitude E6420
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-38-generic 
root=UUID=3c7f4e14-5817-44b1-adbb-1666f8c29348 ro
  SourcePackage: xorg
  Symptom: display
  Title: Xorg freeze
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/04/2016
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A23
  dmi.board.asset.tag: TSI3251
  dmi.board.name: 032T9K
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A02
  dmi.chassis.asset.tag: TSI3251
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA23:bd01/04/2016:svnDellInc.:pnLatitudeE6420:pvr01:rvnDellInc.:rn032T9K:rvrA02:cvnDellInc.:ct9:cvr:
  dmi.product.name: Latitude E6420
  dmi.product.version: 01
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1ubuntu0.16.04.2
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2.2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2.2
  version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.12-1build2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1630884/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1557298] Re: [Xenial][Bluez5] Low Energy Keyboard is paired incorrectly

** Changed in: bluez (Ubuntu)
   Importance: Undecided => High

** Summary changed:

- [Xenial][Bluez5] Low Energy Keyboard is paired incorrectly
+ Low Energy Keyboard is paired incorrectly

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1557298

Title:
  Low Energy Keyboard is paired incorrectly

Status in Unity Control Center:
  New
Status in bluez package in Ubuntu:
  Confirmed

Bug description:
  Failed to pair low energy(bluetooth smart, 4.0) keyboard correctly.

  Bluetooth smart keyboard is unable to use after bluetooth-wizard says
  "OK". Also the passcode input is also not acting interactively like
  when pairing with bluetooth 3.0(LegacyPairing) keyboard.

  Above scenario also being verified with bluetoothctl and blueman.

  Step to reproduce:

  1. open Bluetooth Settings
  2. click on Add New Device button
  3. select the bluetooth le keyboard
  4. input the passcode display on GUI

  Expected result:

  After bluetooth-wizard telling user is okay the keyboard should work

  
  Actual result:

  Pairing mode stop on keyboard, but still not work.

  
  -
  More details about versions:

  Environment:
  xenial daily (20160307)
  bluez 5.37-0ubuntu5
  gnome-bluetooth 3.18.2-1ubuntu2
  blueman  2.0.3-1ubuntu1
  bluetooth controller 0cf3:e005 Atheros Communications, Inc. (hci version: 4.1)

  Tested devices:
  Designer Mouse, bluetooth smart (pairable, work, re-pair work)
  Designer Keyboard, bluetooth smart (paired, not working)
  BT3.0 keyboard, bluetooth classic (pair and work)
  BT3.0 mouse, bluetooth classic (pair and work)

  -
  In control environment with the same hardware system and devices:
  trusty 14.04.1 + dist-upgrade (stay with 3.13 kernel)
  bluez5 5.35 (ppa: https://launchpad.net/~vidplace7/+archive/ubuntu/bluez5)

  It works with all above devices but can only be pairing through
  bluetoothctl manually, since the older bluetooth-wizard does not
  understand bluez 5.x.

  Everything seems works fine, although there are a lot more error
  messages, but since this bug is more about xenial, please let me know
  if we need more information about this, I'm able to reproduce this
  trusty scenario in anytime.

  -
  Additional note:
  A little clarification, since I'm not sure how far the Bluetooth SIG is going 
to use Bluetooth Smart(Low Energy, or even Smart-Ready) to cover the 
versioning, I decided to just use what ever I saw on the product box.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: bluez 5.37-0ubuntu5
  ProcVersionSignature: Ubuntu 4.4.0-12.28-generic 4.4.4
  Uname: Linux 4.4.0-12-generic x86_64
  ApportVersion: 2.20-0ubuntu3
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Tue Mar 15 11:40:12 2016
  InstallationDate: Installed on 2016-03-14 (0 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160307)
  InterestingModules: rfcomm bnep btusb bluetooth
  MachineType: Dell Inc. Latitude E5550
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-12-generic.efi.signed 
root=UUID=1079eca4-4293-4e51-ba0e-84f7d681cb2c ro quiet splash vt.handoff=7
  SourcePackage: bluez
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/18/2015
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A11
  dmi.board.name: 0141B2
  dmi.board.vendor: Dell Inc.
  dmi.board.version: X02
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA11:bd11/18/2015:svnDellInc.:pnLatitudeE5550:pvr:rvnDellInc.:rn0141B2:rvrX02:cvnDellInc.:ct9:cvr:
  dmi.product.name: Latitude E5550
  dmi.sys.vendor: Dell Inc.
  hciconfig:
   hci0:Type: BR/EDR  Bus: USB
    BD Address: 00:71:CC:39:BD:22  ACL MTU: 1022:8  SCO MTU: 183:5
    UP RUNNING PSCAN ISCAN
    RX bytes:862538 acl:39687 sco:0 events:2668 errors:0
    TX bytes:26235 acl:904 sco:0 commands:1021 errors:0

To manage notifications about this bug go to:
https://bugs.launchpad.net/unity-control-center/+bug/1557298/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1589147] Re: [MS-7817, Realtek ALC887-VD, Green Headphone Out, Front] Playback problem

@ Kirill

Only assign yourself if you are planning to fix the bug yourself.

** Changed in: alsa-driver (Ubuntu)
   Importance: Undecided => Medium

** Changed in: alsa-driver (Ubuntu)
   Importance: Medium => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1589147

Title:
  [MS-7817, Realtek ALC887-VD, Green Headphone Out, Front] Playback
  problem

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  Haven't sound at front output and have sound only rear side

  In mixer stand mute at headphones for default and no save, after
  changes and reboot

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
  Uname: Linux 4.4.0-22-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  kirill 1684 F pulseaudio
   /dev/snd/controlC0:  kirill 1684 F pulseaudio
  CurrentDesktop: Unity
  Date: Sat Jun  4 23:51:09 2016
  InstallationDate: Installed on 2016-06-04 (0 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=ru
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=ru_RU.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed
  Symptom_Card: Встроенное аудио - HDA Intel PCH
  Symptom_Jack: Green Headphone Out, Front
  Symptom_Type: Only some of outputs are working
  Title: [MS-7817, Realtek ALC887-VD, Green Headphone Out, Front] Playback 
problem
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/21/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: V6.7
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: H81M-E33 (MS-7817)
  dmi.board.vendor: MSI
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To be filled by O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MSI
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrV6.7:bd04/21/2015:svnMSI:pnMS-7817:pvr1.0:rvnMSI:rnH81M-E33(MS-7817):rvr1.0:cvnMSI:ct3:cvr1.0:
  dmi.product.name: MS-7817
  dmi.product.version: 1.0
  dmi.sys.vendor: MSI

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1589147/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1604467] Re: Alt-Left changes display screen

** Changed in: xorg (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1604467

Title:
  Alt-Left changes display screen

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  When I press Alt and Left, it changes to tty1. I expect it to move my
  browser back a page. It does that also, but I can't see that until I
  change back to tty2 which is where my session is.

  This began today, I don't know if there was an update that caused it.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13
  Uname: Linux 4.4.0-31-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  CurrentDesktop: GNOME
  Date: Tue Jul 19 11:40:34 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  DkmsStatus: vboxhost, 5.0.26, 4.4.0-31-generic, x86_64: installed
  EcryptfsInUse: Yes
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07) (prog-if 
00 [VGA controller])
 Subsystem: Hewlett-Packard Company Skylake Integrated Graphics [103c:80a1]
  InstallationDate: Installed on 2015-12-20 (212 days ago)
  InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Release amd64 
(20151021)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 8087:0a2a Intel Corp. 
   Bus 001 Device 006: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy (MTP)
   Bus 001 Device 002: ID 05c8:0379 Cheng Uei Precision Industry Co., Ltd 
(Foxlink) 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: HP HP Pavilion Notebook
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-31-generic.efi.signed 
root=UUID=c16d5370-604d-47f6-8b73-e4766ccdfb7d ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/14/2016
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.80
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 80A1
  dmi.board.vendor: HP
  dmi.board.version: 91.1D
  dmi.chassis.type: 10
  dmi.chassis.vendor: HP
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.80:bd06/14/2016:svnHP:pnHPPavilionNotebook:pvrType1ProductConfigId:rvnHP:rn80A1:rvr91.1D:cvnHP:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion Notebook
  dmi.product.version: Type1ProductConfigId
  dmi.sys.vendor: HP
  version.compiz: compiz N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.67-1ubuntu0.16.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.2.0-1ubuntu2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.2.0-1ubuntu2
  version.xserver-xorg-core: xserver-xorg-core 2:1.18.3-1ubuntu2.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.12-1build2
  xserver.bootTime: Fri Apr 22 17:30:27 2016
  xserver.configfile: default
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   20049 
   vendor SDC
  xserver.version: 2:1.17.2-1ubuntu9.1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1604467/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1624728] Re: package fontconfig 2.11.94-0ubuntu1.1 failed to install/upgrade: triggers looping, abandoned

** Changed in: fontconfig (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to fontconfig in Ubuntu.
https://bugs.launchpad.net/bugs/1624728

Title:
  package fontconfig 2.11.94-0ubuntu1.1 failed to install/upgrade:
  triggers looping, abandoned

Status in fontconfig package in Ubuntu:
  Confirmed

Bug description:
  I just don't know...

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: fontconfig 2.11.94-0ubuntu1.1
  ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16
  Uname: Linux 4.4.0-36-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  Date: Sat Sep 17 15:20:55 2016
  ErrorMessage: triggers looping, abandoned
  InstallationDate: Installed on 2016-01-01 (260 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.12~ubuntu16.04.1
  SourcePackage: fontconfig
  Title: package fontconfig 2.11.94-0ubuntu1.1 failed to install/upgrade: 
triggers looping, abandoned
  UpgradeStatus: Upgraded to xenial on 2016-09-17 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fontconfig/+bug/1624728/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1663868] Re: package keyboard-configuration 1.108ubuntu15.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 128

** Changed in: console-setup (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to console-setup in Ubuntu.
https://bugs.launchpad.net/bugs/1663868

Title:
  package keyboard-configuration 1.108ubuntu15.3 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 128

Status in console-setup package in Ubuntu:
  Confirmed

Bug description:
  hi allways automaticliy install the amd 64 version but i have an intel
  64

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: keyboard-configuration 1.108ubuntu15.3
  ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40
  Uname: Linux 4.4.0-62-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.5
  Architecture: amd64
  Date: Sat Feb 11 12:06:41 2017
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 128
  InstallationDate: Installed on 2016-12-01 (71 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  PackageArchitecture: all
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.19
  SourcePackage: console-setup
  Title: package keyboard-configuration 1.108ubuntu15.3 failed to 
install/upgrade: subprocess installed post-installation script returned error 
exit status 128
  UpgradeStatus: No upgrade log present (probably fresh install)
  modified.conffile..etc.init.d.keyboard-setup: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/console-setup/+bug/1663868/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1656842] Re: package unattended-upgrades 0.90ubuntu0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 10

** Changed in: unattended-upgrades (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unattended-upgrades in
Ubuntu.
https://bugs.launchpad.net/bugs/1656842

Title:
  package unattended-upgrades 0.90ubuntu0.3 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 10

Status in unattended-upgrades package in Ubuntu:
  Confirmed

Bug description:
  I have marked all upgrades in synaptic GUI, and apply then just after
  install ubuntu 16.04.

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: unattended-upgrades 0.90ubuntu0.3
  ProcVersionSignature: Ubuntu 4.4.0-59.80-generic 4.4.35
  Uname: Linux 4.4.0-59-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.4
  Architecture: amd64
  Date: Mon Jan 16 12:43:38 2017
  DuplicateSignature:
   package:unattended-upgrades:0.90ubuntu0.3
   Setting up grub-pc (2.02~beta2-36ubuntu3.6) ...
   dpkg: error processing package grub-pc (--configure):
subprocess installed post-installation script returned error exit status 10
  ErrorMessage: subprocess installed post-installation script returned error 
exit status 10
  InstallationDate: Installed on 2017-01-03 (12 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  PackageArchitecture: all
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.1
   apt  1.2.18
  SourcePackage: unattended-upgrades
  Title: package unattended-upgrades 0.90ubuntu0.3 failed to install/upgrade: 
subprocess installed post-installation script returned error exit status 10
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unattended-upgrades/+bug/1656842/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV

This bug was fixed in the package python-crypto - 2.6.1-6ubuntu0.16.04.2

---
python-crypto (2.6.1-6ubuntu0.16.04.2) xenial-security; urgency=medium

  * Update CVE-2013-7459: Print a warning, rather than raise an exception.
Thanks to Sebastian Ramacher. (Closes: #1665598)

 -- Emily Ratliff   Fri, 17 Feb 2017
09:35:46 -0600

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python-crypto in Ubuntu.
https://bugs.launchpad.net/bugs/1665598

Title:
  python-crypto throws exception ValueError: CTR mode needs counter
  parameter, not IV

Status in OpenStack Charm Test Infra:
  Confirmed
Status in python-crypto package in Ubuntu:
  Fix Released

Bug description:
  We've recently upgraded python-crypto package on 14.04 due to this USN
  https://www.ubuntu.com/usn/usn-3199-1/

  
  apt history log

  ```
  Start-Date: 2017-02-16  23:43:48
  Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o 
DPkg::Options::=--force-confdef dist-upgrade
  Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13)
  End-Date: 2017-02-16  23:43:52
  ```

  Then our python script which uses paramiko failed with this exception

  ```
  Traceback (most recent call last):
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1583, in run
  self.kex_engine.parse_next(ptype, m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 68, in parse_next
  return self._parse_kexdh_reply(m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 107, in _parse_kexdh_reply
  self.transport._activate_outbound()
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1881, in _activate_outbound
  engine = self._get_cipher(self.local_cipher, key_out, IV_out)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1500, in _get_cipher
  return self._cipher_info[name]['class'].new(key, 
self._cipher_info[name]['mode'], iv, counter)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in 
new
  return AESCipher(key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in 
__init__
  blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 
141, in __init__
  self._cipher = factory.new(key, *args, **kwargs)
  ValueError: CTR mode needs counter parameter, not IV

  ```

  packages versions

  ```
  pycrypto==2.6.1
  paramiko==1.12.0
  ```

  which works okay BEFORE the upgrade.

  Maybe Debian bug report: https://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=850025

To manage notifications about this bug go to:
https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV

This bug was fixed in the package python-crypto - 2.6.1-4ubuntu0.2

---
python-crypto (2.6.1-4ubuntu0.2) trusty-security; urgency=medium

  * Update CVE-2013-7459: Print a warning, rather than raise an exception.
Thanks to Sebastian Ramacher. (Closes: #1665598)

 -- Emily Ratliff   Fri, 17 Feb 2017
10:07:46 -0600

** Changed in: python-crypto (Ubuntu)
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python-crypto in Ubuntu.
https://bugs.launchpad.net/bugs/1665598

Title:
  python-crypto throws exception ValueError: CTR mode needs counter
  parameter, not IV

Status in OpenStack Charm Test Infra:
  Confirmed
Status in python-crypto package in Ubuntu:
  Fix Released

Bug description:
  We've recently upgraded python-crypto package on 14.04 due to this USN
  https://www.ubuntu.com/usn/usn-3199-1/

  
  apt history log

  ```
  Start-Date: 2017-02-16  23:43:48
  Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o 
DPkg::Options::=--force-confdef dist-upgrade
  Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13)
  End-Date: 2017-02-16  23:43:52
  ```

  Then our python script which uses paramiko failed with this exception

  ```
  Traceback (most recent call last):
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1583, in run
  self.kex_engine.parse_next(ptype, m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 68, in parse_next
  return self._parse_kexdh_reply(m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 107, in _parse_kexdh_reply
  self.transport._activate_outbound()
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1881, in _activate_outbound
  engine = self._get_cipher(self.local_cipher, key_out, IV_out)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1500, in _get_cipher
  return self._cipher_info[name]['class'].new(key, 
self._cipher_info[name]['mode'], iv, counter)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in 
new
  return AESCipher(key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in 
__init__
  blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 
141, in __init__
  self._cipher = factory.new(key, *args, **kwargs)
  ValueError: CTR mode needs counter parameter, not IV

  ```

  packages versions

  ```
  pycrypto==2.6.1
  paramiko==1.12.0
  ```

  which works okay BEFORE the upgrade.

  Maybe Debian bug report: https://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=850025

To manage notifications about this bug go to:
https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV

This bug was fixed in the package python-crypto - 2.6.1-6ubuntu0.16.10.3

---
python-crypto (2.6.1-6ubuntu0.16.10.3) yakkety-security; urgency=medium

  * Update CVE-2013-7459: Print a warning, rather than raise an exception.
Thanks to Sebastian Ramacher. (Closes: #1665598)

 -- Emily Ratliff   Fri, 17 Feb 2017
10:01:32 -0600

** Changed in: python-crypto (Ubuntu)
   Status: Confirmed => Fix Released

** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2013-7459

** Changed in: python-crypto (Ubuntu)
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python-crypto in Ubuntu.
https://bugs.launchpad.net/bugs/1665598

Title:
  python-crypto throws exception ValueError: CTR mode needs counter
  parameter, not IV

Status in OpenStack Charm Test Infra:
  Confirmed
Status in python-crypto package in Ubuntu:
  Fix Released

Bug description:
  We've recently upgraded python-crypto package on 14.04 due to this USN
  https://www.ubuntu.com/usn/usn-3199-1/

  
  apt history log

  ```
  Start-Date: 2017-02-16  23:43:48
  Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o 
DPkg::Options::=--force-confdef dist-upgrade
  Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13)
  End-Date: 2017-02-16  23:43:52
  ```

  Then our python script which uses paramiko failed with this exception

  ```
  Traceback (most recent call last):
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1583, in run
  self.kex_engine.parse_next(ptype, m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 68, in parse_next
  return self._parse_kexdh_reply(m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 107, in _parse_kexdh_reply
  self.transport._activate_outbound()
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1881, in _activate_outbound
  engine = self._get_cipher(self.local_cipher, key_out, IV_out)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1500, in _get_cipher
  return self._cipher_info[name]['class'].new(key, 
self._cipher_info[name]['mode'], iv, counter)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in 
new
  return AESCipher(key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in 
__init__
  blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 
141, in __init__
  self._cipher = factory.new(key, *args, **kwargs)
  ValueError: CTR mode needs counter parameter, not IV

  ```

  packages versions

  ```
  pycrypto==2.6.1
  paramiko==1.12.0
  ```

  which works okay BEFORE the upgrade.

  Maybe Debian bug report: https://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=850025

To manage notifications about this bug go to:
https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665598] Re: python-crypto throws exception ValueError: CTR mode needs counter parameter, not IV

2017-02-17 Thread Vej

** Tags added: trusty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to python-crypto in Ubuntu.
https://bugs.launchpad.net/bugs/1665598

Title:
  python-crypto throws exception ValueError: CTR mode needs counter
  parameter, not IV

Status in OpenStack Charm Test Infra:
  Confirmed
Status in python-crypto package in Ubuntu:
  Confirmed

Bug description:
  We've recently upgraded python-crypto package on 14.04 due to this USN
  https://www.ubuntu.com/usn/usn-3199-1/

  
  apt history log

  ```
  Start-Date: 2017-02-16  23:43:48
  Commandline: apt-get -q -y -o DPkg::Options::=--force-confold -o 
DPkg::Options::=--force-confdef dist-upgrade
  Upgrade: bind9-host:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
liblwres90:amd64 (9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), 
python-crypto:amd64 (2.6.1-4build1, 2.6.1-4ubuntu0.1), libdns100:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccfg90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libbind9-90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), dnsutils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), bind9utils:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisccc90:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13), libisc95:amd64 
(9.9.5.dfsg-3ubuntu0.12, 9.9.5.dfsg-3ubuntu0.13)
  End-Date: 2017-02-16  23:43:52
  ```

  Then our python script which uses paramiko failed with this exception

  ```
  Traceback (most recent call last):
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1583, in run
  self.kex_engine.parse_next(ptype, m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 68, in parse_next
  return self._parse_kexdh_reply(m)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/kex_group1.py", 
line 107, in _parse_kexdh_reply
  self.transport._activate_outbound()
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1881, in _activate_outbound
  engine = self._get_cipher(self.local_cipher, key_out, IV_out)
File 
"/usr/local/nagios/local/lib/python2.7/site-packages/paramiko/transport.py", 
line 1500, in _get_cipher
  return self._cipher_info[name]['class'].new(key, 
self._cipher_info[name]['mode'], iv, counter)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 94, in 
new
  return AESCipher(key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/AES.py", line 59, in 
__init__
  blockalgo.BlockAlgo.__init__(self, _AES, key, *args, **kwargs)
File "/usr/lib/python2.7/dist-packages/Crypto/Cipher/blockalgo.py", line 
141, in __init__
  self._cipher = factory.new(key, *args, **kwargs)
  ValueError: CTR mode needs counter parameter, not IV

  ```

  packages versions

  ```
  pycrypto==2.6.1
  paramiko==1.12.0
  ```

  which works okay BEFORE the upgrade.

  Maybe Debian bug report: https://bugs.debian.org/cgi-
  bin/bugreport.cgi?bug=850025

To manage notifications about this bug go to:
https://bugs.launchpad.net/charm-test-infra/+bug/1665598/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665629] Re: external HDMI doesnt function properly

2017-02-17 Thread Brian Murray

** Package changed: ubuntu => xorg (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1665629

Title:
  external HDMI doesnt function properly

Status in xorg package in Ubuntu:
  New

Bug description:
  New clean install of 16.04 on dell Inspiron N5110 laptop,when External HDMI 
Monitor plugged in
   display randomly switches from laptop screen to hdmi screen ,
   changing resolution, 
  changing display mode,
  display positioning,
  whether the internal or external display is enabled or not, 
  and other things all display settings related, ie size of iconts, font and 
title bars.
  All this happens AUTOMATICALLY and without notice.
  This does not stop, it makes it look like the computer is Haunted.
   How do I fix this???

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1665629/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665711] Re: /etc/os-release: Use https

2017-02-17 Thread Jeremy Bicha

** Patch added: "lp1665711-base-files-https.debdiff"
   
https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/1665711/+attachment/4820937/+files/lp1665711-base-files-https.debdiff

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to base-files in Ubuntu.
https://bugs.launchpad.net/bugs/1665711

Title:
  /etc/os-release: Use https

Status in base-files package in Ubuntu:
  Triaged

Bug description:
  Ubuntu's main website is now accessible via https so let's update /etc
  /os-release for this.

  .debdiff attached for sponsoring.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/1665711/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665711] [NEW] /etc/os-release: Use https

2017-02-17 Thread Jeremy Bicha

Public bug reported:

Ubuntu's main website is now accessible via https so let's update /etc
/os-release for this.

.debdiff attached for sponsoring.

** Affects: base-files (Ubuntu)
 Importance: Low
 Status: Triaged


** Tags: zesty

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to base-files in Ubuntu.
https://bugs.launchpad.net/bugs/1665711

Title:
  /etc/os-release: Use https

Status in base-files package in Ubuntu:
  Triaged

Bug description:
  Ubuntu's main website is now accessible via https so let's update /etc
  /os-release for this.

  .debdiff attached for sponsoring.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/base-files/+bug/1665711/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665629] [NEW] external HDMI doesnt function properly

You have been subscribed to a public bug:

New clean install of 16.04 on dell Inspiron N5110 laptop,when External HDMI 
Monitor plugged in
 display randomly switches from laptop screen to hdmi screen ,
 changing resolution, 
changing display mode,
display positioning,
whether the internal or external display is enabled or not, 
and other things all display settings related, ie size of iconts, font and 
title bars.
All this happens AUTOMATICALLY and without notice.
This does not stop, it makes it look like the computer is Haunted.
 How do I fix this???

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: bot-comment
-- 
external HDMI doesnt function properly
https://bugs.launchpad.net/bugs/1665629
You received this bug notification because you are a member of Ubuntu Touch 
seeded packages, which is subscribed to xorg in Ubuntu.

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665707] [NEW] After the very latest updates cannot load menu and top bar after login

2017-02-17 Thread Paco Raxim

Public bug reported:

I have no idea what is happening, but i had to reinstall my Ubuntu because of 
that.
Problem occurred again on the newly installed system. Before that it was just 
some large file copying. I had to shutdown my computer with power button, 
luckily next time, with some CPU ring error, and file lost the system came back.

It is a totally different hard drive also, as i'm using a portable one
now, which is faster.

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1665707

Title:
  After the very latest updates cannot load menu and top bar after login

Status in xorg package in Ubuntu:
  New

Bug description:
  I have no idea what is happening, but i had to reinstall my Ubuntu because of 
that.
  Problem occurred again on the newly installed system. Before that it was just 
some large file copying. I had to shutdown my computer with power button, 
luckily next time, with some CPU ring error, and file lost the system came back.

  It is a totally different hard drive also, as i'm using a portable one
  now, which is faster.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1665707/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665705] Re: Deleting a QRasterWindow crashes

2017-02-17 Thread Gerry Boland

** Changed in: qtubuntu (Ubuntu)
   Status: New => Confirmed

** Changed in: qtubuntu (Ubuntu)
   Importance: Undecided => Critical

** Changed in: qtubuntu (Ubuntu)
 Assignee: (unassigned) => Gerry Boland (gerboland)

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1665705

Title:
  Deleting a QRasterWindow crashes

Status in qtubuntu package in Ubuntu:
  Confirmed

Bug description:
  The attached program crashes when run under unity8/qtubuntu, works
  fine with other QPAs

  terminal log says "pure virtual method called"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1665705/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665705] [NEW] Deleting a QRasterWindow crashes

2017-02-17 Thread Albert Astals Cid

Public bug reported:

The attached program crashes when run under unity8/qtubuntu, works fine
with other QPAs

terminal log says "pure virtual method called"

** Affects: qtubuntu (Ubuntu)
 Importance: Critical
 Assignee: Gerry Boland (gerboland)
 Status: Confirmed

** Attachment added: "main.cpp"
   https://bugs.launchpad.net/bugs/1665705/+attachment/4820928/+files/main.cpp

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtubuntu in Ubuntu.
https://bugs.launchpad.net/bugs/1665705

Title:
  Deleting a QRasterWindow crashes

Status in qtubuntu package in Ubuntu:
  Confirmed

Bug description:
  The attached program crashes when run under unity8/qtubuntu, works
  fine with other QPAs

  terminal log says "pure virtual method called"

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qtubuntu/+bug/1665705/+subscriptions

-- 
Mailing list: https://launchpad.net/~touch-packages
Post to : touch-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~touch-packages
More help   : https://help.launchpad.net/ListHelp

[Touch-packages] [Bug 1665700] Re: package udev 232-17ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1