Re: [Ubnt_users] airfiber 3
Max TX power depends on the channel width in 3.65ghz. With the full 40mhz channel, I believe the AF3x will let you go up to 46db EIRP (the dish is 26dbi, so that would be 20dbm eirp, not accounting for any cable loss)... I assume that's what's actually allowed, but I'd have to look up the numbers to be sure. For a 20mhz channel the max is something like 43db EIRP, and less for narrower channels. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of Nick Bright [nick.bri...@valnet.net] Sent: Wednesday, February 21, 2018 3:32 PM To: ubnt_users@wispa.org Subject: Re: [Ubnt_users] airfiber 3 On 1/30/2018 11:49 AM, Mike Goicoechea wrote: > Are you using out of band management? Check eirp also. We have seen > the airfiber throttle down one sides power down. I had this happen to a link, pulled it down to -26dBm TX power or something silly. The only fix was to manually specify the power. For an RD-3G26 dish, I believe the max TX power should be +19dBm conducted; if I have done my math correctly. -- --- - Nick Bright- - Vice President of Technology - - Valnet -=- We Connect You -=- - - Tel 888-332-1616 x 315 / Fax 620-331-0789 - - Web http://www.valnet.net/ - --- - Are your files safe?- - Valnet Vault - Secure Cloud Backup - - More information & 30 day free trial at - - http://www.valnet.net/services/valnet-vault - --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
On 1/30/2018 11:49 AM, Mike Goicoechea wrote: > Are you using out of band management? Check eirp also. We have seen > the airfiber throttle down one sides power down. I had this happen to a link, pulled it down to -26dBm TX power or something silly. The only fix was to manually specify the power. For an RD-3G26 dish, I believe the max TX power should be +19dBm conducted; if I have done my math correctly. -- --- - Nick Bright- - Vice President of Technology - - Valnet -=- We Connect You -=- - - Tel 888-332-1616 x 315 / Fax 620-331-0789 - - Web http://www.valnet.net/ - --- - Are your files safe?- - Valnet Vault - Secure Cloud Backup - - More information & 30 day free trial at - - http://www.valnet.net/services/valnet-vault - --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
Get Outlook for Android<https://aka.ms/ghei36> From: ubnt_users-boun...@wispa.org <ubnt_users-boun...@wispa.org> on behalf of CBB - Jay Fuller <par...@cyberbroadband.net> Sent: Wednesday, January 31, 2018 11:24:44 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] airfiber 3 Thanks for the info - Original Message - From: Mathew Howard<mailto:mat...@litewire.net> To: Ubiquiti Users Group<mailto:ubnt_users@wispa.org> Sent: Tuesday, January 30, 2018 10:35 PM Subject: Re: [Ubnt_users] airfiber 3 The max transmit power for 3.65ghz depends on what channel width you're using. If it's using 2' dishes, the antenna gain should be somewhere around 26dbi. I think you can go up to like 44db (or maybe 46... I don't remember for sure off hand) EIRP if you're using the full 40mhz channel, so transmit power should be like 20dbm max with 2' dishes. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of CBB - Jay Fuller [par...@cyberbroadband.net] Sent: Tuesday, January 30, 2018 11:01 AM To: Ubiquiti Users Group Subject: [Ubnt_users] airfiber 3 When configuring airfiber 3, what should the transmit output power be, and what should the antenna gain be? We are using rocketdishes. Thanks! ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
Thanks for the info - Original Message - From: Mathew Howard To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 10:35 PM Subject: Re: [Ubnt_users] airfiber 3 The max transmit power for 3.65ghz depends on what channel width you're using. If it's using 2' dishes, the antenna gain should be somewhere around 26dbi. I think you can go up to like 44db (or maybe 46... I don't remember for sure off hand) EIRP if you're using the full 40mhz channel, so transmit power should be like 20dbm max with 2' dishes. -- From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of CBB - Jay Fuller [par...@cyberbroadband.net] Sent: Tuesday, January 30, 2018 11:01 AM To: Ubiquiti Users Group Subject: [Ubnt_users] airfiber 3 When configuring airfiber 3, what should the transmit output power be, and what should the antenna gain be? We are using rocketdishes. Thanks! -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
The max transmit power for 3.65ghz depends on what channel width you're using. If it's using 2' dishes, the antenna gain should be somewhere around 26dbi. I think you can go up to like 44db (or maybe 46... I don't remember for sure off hand) EIRP if you're using the full 40mhz channel, so transmit power should be like 20dbm max with 2' dishes. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of CBB - Jay Fuller [par...@cyberbroadband.net] Sent: Tuesday, January 30, 2018 11:01 AM To: Ubiquiti Users Group Subject: [Ubnt_users] airfiber 3 When configuring airfiber 3, what should the transmit output power be, and what should the antenna gain be? We are using rocketdishes. Thanks! ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
Are you using out of band management? Check eirp also. We have seen the airfiber throttle down one sides power down. Mike Goicoechea Cielo Systems International | 806.977.9001 ext 101| m...@cielosystems.net Skype Mike. Goik| www.cielosystems.net <http://www.cielosystems.net/> | <https://www.facebook.com/cielosystemsinternational> <https://twitter.com/CieloSystems> <http://www.linkedin.com/company/953134?trk=tyah=tas%3Acielo%20syste ms%20international%2Cidx%3A1-1-1> <http://instagram.com/cielosystems> <https://www.youtube.com/user/cielosystems> From: <ubnt_users-boun...@wispa.org> on behalf of CBB - Jay Fuller <par...@cyberbroadband.net> Reply-To: Ubiquiti Users Group <ubnt_users@wispa.org> Date: Tuesday, January 30, 2018 at 11:41 AM To: Ubiquiti Users Group <ubnt_users@wispa.org> Subject: Re: [Ubnt_users] airfiber 3 I wish. Wouldn't be using 3.65 if it were LOS > > - Original Message - > > From: Josh Luthman <mailto:j...@imaginenetworksllc.com> > > To: Ubiquiti Users Group <mailto:ubnt_users@wispa.org> > > Sent: Tuesday, January 30, 2018 11:38 AM > > Subject: Re: [Ubnt_users] airfiber 3 > > > > LOS? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> > wrote: > >> >> >> >> >> we are seeing a "chain inbalanace" and having a hard time fixing it >> >> >> >> one end of the link (local) is -55 / -56 >> >> the other end is like -56 / -78 >> >> >> >> it has killed the throughput of the link >> >> >> >> bad radio? >> >> >> >>> >>> - Original Message - >>> >>> From: CBB - Jay Fuller <mailto:par...@cyberbroadband.net> >>> >>> To: Ubiquiti Users Group <mailto:ubnt_users@wispa.org> >>> >>> Sent: Tuesday, January 30, 2018 11:09 AM >>> >>> Subject: Re: [Ubnt_users] airfiber 3 >>> >>> >>> >>> >>> >>> not my department... >>> >>> >>> >>>> >>>> - Original Message - >>>> >>>> From: Josh Luthman <mailto:j...@imaginenetworksllc.com> >>>> >>>> To: Ubiquiti Users Group <mailto:ubnt_users@wispa.org> >>>> >>>> Sent: Tuesday, January 30, 2018 11:02 AM >>>> >>>> Subject: Re: [Ubnt_users] airfiber 3 >>>> >>>> >>>> >>>> Did you submit and get a green light from Cheryl Black? That's where your >>>> power should be detailed... >>>> >>>> >>>> >>>> >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 <tel:(937)%20552-2340> >>>> Direct: 937-552-2343 <tel:(937)%20552-2343> >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> >>>> On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller >>>> <par...@cyberbroadband.net> wrote: >>>> >>>>> >>>>> >>>>> >>>>> >>>>> When configuring airfiber 3, what should the transmit output power be, >>>>> and what should the antenna gain be? >>>>> >>>>> We are using rocketdishes. >>>>> >>>>> Thanks! >>>>> >>>>> >>>>> >>>>> ___ >>>>> Ubnt_users mailing list >>>>> Ubnt_users@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> ___ >>>> Ubnt_users mailing list >>>> Ubnt_users@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>> >>> >>> >>> >>> >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
Did the issue follow the connectors? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 30, 2018 12:48 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> wrote: > > no, link has been here at least two years. not sure what is up. > powercode did not alert us to the problem and the signal issue has been > going on about a month. we've checked both ends and even swapped > connectors. moving towards bad radio. > > > - Original Message - > *From:* Josh Luthman <j...@imaginenetworksllc.com> > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Sent:* Tuesday, January 30, 2018 11:47 AM > *Subject:* Re: [Ubnt_users] airfiber 3 > > Did you track the signals over time? If lost signal, more than likely bad > radio. > > Is this a new link? > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Jan 30, 2018 12:41 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> > wrote: > >> >> I wish. Wouldn't be using 3.65 if it were LOS >> >> >> - Original Message - >> *From:* Josh Luthman <j...@imaginenetworksllc.com> >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Sent:* Tuesday, January 30, 2018 11:38 AM >> *Subject:* Re: [Ubnt_users] airfiber 3 >> >> LOS? >> >> Josh Luthman >> Office: 937-552-2340 <(937)%20552-2340> >> Direct: 937-552-2343 <(937)%20552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> >> wrote: >> >>> >>> we are seeing a "chain inbalanace" and having a hard time fixing it >>> >>> one end of the link (local) is -55 / -56 >>> the other end is like -56 / -78 >>> >>> it has killed the throughput of the link >>> >>> bad radio? >>> >>> >>> - Original Message - >>> *From:* CBB - Jay Fuller <par...@cyberbroadband.net> >>> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >>> *Sent:* Tuesday, January 30, 2018 11:09 AM >>> *Subject:* Re: [Ubnt_users] airfiber 3 >>> >>> >>> not my department... >>> >>> >>> - Original Message - >>> *From:* Josh Luthman <j...@imaginenetworksllc.com> >>> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >>> *Sent:* Tuesday, January 30, 2018 11:02 AM >>> *Subject:* Re: [Ubnt_users] airfiber 3 >>> >>> Did you submit and get a green light from Cheryl Black? That's where >>> your power should be detailed... >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 <(937)%20552-2340> >>> Direct: 937-552-2343 <(937)%20552-2343> >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller < >>> par...@cyberbroadband.net> wrote: >>> >>>> >>>> When configuring airfiber 3, what should the transmit output power be, >>>> and what should the antenna gain be? >>>> We are using rocketdishes. >>>> Thanks! >>>> >>>> >>>> ___ >>>> Ubnt_users mailing list >>>> Ubnt_users@wispa.org >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>> -- >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> -- >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> -- >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> -- > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
no, link has been here at least two years. not sure what is up. powercode did not alert us to the problem and the signal issue has been going on about a month. we've checked both ends and even swapped connectors. moving towards bad radio. - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:47 AM Subject: Re: [Ubnt_users] airfiber 3 Did you track the signals over time? If lost signal, more than likely bad radio. Is this a new link? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 30, 2018 12:41 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> wrote: I wish. Wouldn't be using 3.65 if it were LOS - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:38 AM Subject: Re: [Ubnt_users] airfiber 3 LOS? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> wrote: we are seeing a "chain inbalanace" and having a hard time fixing it one end of the link (local) is -55 / -56 the other end is like -56 / -78 it has killed the throughput of the link bad radio? - Original Message - From: CBB - Jay Fuller To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:09 AM Subject: Re: [Ubnt_users] airfiber 3 not my department... - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:02 AM Subject: Re: [Ubnt_users] airfiber 3 Did you submit and get a green light from Cheryl Black? That's where your power should be detailed... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller <par...@cyberbroadband.net> wrote: When configuring airfiber 3, what should the transmit output power be, and what should the antenna gain be? We are using rocketdishes. Thanks! ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
Did you track the signals over time? If lost signal, more than likely bad radio. Is this a new link? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 30, 2018 12:41 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> wrote: > > I wish. Wouldn't be using 3.65 if it were LOS > > > - Original Message - > *From:* Josh Luthman <j...@imaginenetworksllc.com> > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Sent:* Tuesday, January 30, 2018 11:38 AM > *Subject:* Re: [Ubnt_users] airfiber 3 > > LOS? > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> > wrote: > >> >> we are seeing a "chain inbalanace" and having a hard time fixing it >> >> one end of the link (local) is -55 / -56 >> the other end is like -56 / -78 >> >> it has killed the throughput of the link >> >> bad radio? >> >> >> - Original Message - >> *From:* CBB - Jay Fuller <par...@cyberbroadband.net> >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Sent:* Tuesday, January 30, 2018 11:09 AM >> *Subject:* Re: [Ubnt_users] airfiber 3 >> >> >> not my department... >> >> >> - Original Message - >> *From:* Josh Luthman <j...@imaginenetworksllc.com> >> *To:* Ubiquiti Users Group <ubnt_users@wispa.org> >> *Sent:* Tuesday, January 30, 2018 11:02 AM >> *Subject:* Re: [Ubnt_users] airfiber 3 >> >> Did you submit and get a green light from Cheryl Black? That's where >> your power should be detailed... >> >> >> Josh Luthman >> Office: 937-552-2340 <(937)%20552-2340> >> Direct: 937-552-2343 <(937)%20552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller < >> par...@cyberbroadband.net> wrote: >> >>> >>> When configuring airfiber 3, what should the transmit output power be, >>> and what should the antenna gain be? >>> We are using rocketdishes. >>> Thanks! >>> >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >> -- >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> -- >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> -- > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
I wish. Wouldn't be using 3.65 if it were LOS - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:38 AM Subject: Re: [Ubnt_users] airfiber 3 LOS? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> wrote: we are seeing a "chain inbalanace" and having a hard time fixing it one end of the link (local) is -55 / -56 the other end is like -56 / -78 it has killed the throughput of the link bad radio? - Original Message - From: CBB - Jay Fuller To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:09 AM Subject: Re: [Ubnt_users] airfiber 3 not my department... - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:02 AM Subject: Re: [Ubnt_users] airfiber 3 Did you submit and get a green light from Cheryl Black? That's where your power should be detailed... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller <par...@cyberbroadband.net> wrote: When configuring airfiber 3, what should the transmit output power be, and what should the antenna gain be? We are using rocketdishes. Thanks! ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
LOS? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 30, 2018 12:37 PM, "CBB - Jay Fuller" <par...@cyberbroadband.net> wrote: > > we are seeing a "chain inbalanace" and having a hard time fixing it > > one end of the link (local) is -55 / -56 > the other end is like -56 / -78 > > it has killed the throughput of the link > > bad radio? > > > - Original Message - > *From:* CBB - Jay Fuller <par...@cyberbroadband.net> > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Sent:* Tuesday, January 30, 2018 11:09 AM > *Subject:* Re: [Ubnt_users] airfiber 3 > > > not my department... > > > - Original Message - > *From:* Josh Luthman <j...@imaginenetworksllc.com> > *To:* Ubiquiti Users Group <ubnt_users@wispa.org> > *Sent:* Tuesday, January 30, 2018 11:02 AM > *Subject:* Re: [Ubnt_users] airfiber 3 > > Did you submit and get a green light from Cheryl Black? That's where your > power should be detailed... > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller < > par...@cyberbroadband.net> wrote: > >> >> When configuring airfiber 3, what should the transmit output power be, >> and what should the antenna gain be? >> We are using rocketdishes. >> Thanks! >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > -- > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
we are seeing a "chain inbalanace" and having a hard time fixing it one end of the link (local) is -55 / -56 the other end is like -56 / -78 it has killed the throughput of the link bad radio? - Original Message - From: CBB - Jay Fuller To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:09 AM Subject: Re: [Ubnt_users] airfiber 3 not my department... - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:02 AM Subject: Re: [Ubnt_users] airfiber 3 Did you submit and get a green light from Cheryl Black? That's where your power should be detailed... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller <par...@cyberbroadband.net> wrote: When configuring airfiber 3, what should the transmit output power be, and what should the antenna gain be? We are using rocketdishes. Thanks! ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
not my department... - Original Message - From: Josh Luthman To: Ubiquiti Users Group Sent: Tuesday, January 30, 2018 11:02 AM Subject: Re: [Ubnt_users] airfiber 3 Did you submit and get a green light from Cheryl Black? That's where your power should be detailed... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller <par...@cyberbroadband.net> wrote: When configuring airfiber 3, what should the transmit output power be, and what should the antenna gain be? We are using rocketdishes. Thanks! ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
Did you submit and get a green light from Cheryl Black? That's where your power should be detailed... Josh Luthman Office: 937-552-2340 <(937)%20552-2340> Direct: 937-552-2343 <(937)%20552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 30, 2018 at 12:01 PM, CBB - Jay Fuller < par...@cyberbroadband.net> wrote: > > When configuring airfiber 3, what should the transmit output power be, and > what should the antenna gain be? > We are using rocketdishes. > Thanks! > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] airfiber 3
When configuring airfiber 3, what should the transmit output power be, and what should the antenna gain be? We are using rocketdishes. Thanks! ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
I haven't done any AF2x links, but you should be able to do 8x with that kind of signal, depending on the noise. But... what Josh said. I would expect 2.4ghz to be pretty much useless for any other purpose once you put up an AF2x. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of CBB - Jay Fuller [par...@cyberbroadband.net] Sent: Thursday, June 23, 2016 12:55 PM To: Salvador Bertenbreiter; Ubiquiti Users Group Subject: Re: [Ubnt_users] airfiber 3 there is 2.4 in the area but probably mid to low 70s. i know we could get signal in at about -52 but then what modulation could we achieve? I am quite certain there is no 3.65 - Original Message - From: Salvador Bertenbreiter via Ubnt_users<mailto:ubnt_users@wispa.org> To: Ubiquiti Users Group<mailto:ubnt_users@wispa.org> Sent: Thursday, June 23, 2016 12:42 PM Subject: Re: [Ubnt_users] airfiber 3 Hi Jay, If you have an airMax M2 device you can run airView and check how clean is 2.4GHz, if there's spectrum available I would definitely go with the AF 2X Thanks, Salvador On Wed, Jun 22, 2016 at 9:41 PM, CBB - Jay Fuller <par...@cyberbroadband.net<mailto:par...@cyberbroadband.net>> wrote: Anyone using this? Looking to go about a mile through light trees. Maybe a mile and a half. I know I was able to get upper 50s on 2.4 signal on a previous installation. I'd like to get the 300 meg. I need as much bandwidth as possible. Any reports would be fantastic. 2.4 is an option too if I must... ___ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
yes, that is what i am thinking. there is a row of trees that might annoy me. - Original Message - From: Josh Luthman To: Salvador Bertenbreiter ; Ubiquiti Users Group Sent: Thursday, June 23, 2016 12:43 PM Subject: Re: [Ubnt_users] airfiber 3 A 2X would eliminate you from being able to do ptmp 2.4 to your customers. I would do 3X and retain the valuable ptmp spectrum. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jun 23, 2016 at 1:42 PM, Salvador Bertenbreiter via Ubnt_users <ubnt_users@wispa.org> wrote: Hi Jay, If you have an airMax M2 device you can run airView and check how clean is 2.4GHz, if there's spectrum available I would definitely go with the AF 2X Thanks, Salvador On Wed, Jun 22, 2016 at 9:41 PM, CBB - Jay Fuller <par...@cyberbroadband.net> wrote: Anyone using this? Looking to go about a mile through light trees. Maybe a mile and a half. I know I was able to get upper 50s on 2.4 signal on a previous installation. I'd like to get the 300 meg. I need as much bandwidth as possible. Any reports would be fantastic. 2.4 is an option too if I must... ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
A 2X would eliminate you from being able to do ptmp 2.4 to your customers. I would do 3X and retain the valuable ptmp spectrum. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jun 23, 2016 at 1:42 PM, Salvador Bertenbreiter via Ubnt_users < ubnt_users@wispa.org> wrote: > Hi Jay, > If you have an airMax M2 device you can run airView and check how clean is > 2.4GHz, if there's spectrum available I would definitely go with the AF 2X > > Thanks, > > Salvador > > On Wed, Jun 22, 2016 at 9:41 PM, CBB - Jay Fuller < > par...@cyberbroadband.net> wrote: > >> >> Anyone using this? Looking to go about a mile through light trees. >> Maybe a mile and a half. >> I know I was able to get upper 50s on 2.4 signal on a previous >> installation. >> >> I'd like to get the 300 meg. I need as much bandwidth as possible. >> >> Any reports would be fantastic. >> >> 2.4 is an option too if I must... >> >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
I'm not sure you'll get 300 meg out of it, but it's probably going to work better than 2.4ghz... unless 2.4 happens to be pretty clean in the area (and you aren't using it for anything else). our AF3x link is doing a little under 300 meg (210 down/66 up, at the moment) with a -59, so you might get close... it's hard to say how much signal you're going to lose going with 3.65 over 2.4. From: ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on behalf of CBB - Jay Fuller [par...@cyberbroadband.net] Sent: Wednesday, June 22, 2016 8:41 PM To: Ubiquiti Users Group Subject: [Ubnt_users] airfiber 3 Anyone using this? Looking to go about a mile through light trees. Maybe a mile and a half. I know I was able to get upper 50s on 2.4 signal on a previous installation. I'd like to get the 300 meg. I need as much bandwidth as possible. Any reports would be fantastic. 2.4 is an option too if I must... ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
It'd be worth it to see what the b5 would do with such a short shot. I'm a believer after finally deploying one. I am shooting through the top of a pine on a 7 mile link. I can still get 500+ through with the right channel selections. Signal level is -64, so the obstruction may not be such a big deal. Sent from my Verizon, Samsung Galaxy smartphone Original message From: CBB - Jay Fuller <par...@cyberbroadband.net> Date: 6/22/16 7:57 PM (GMT-07:00) To: Ubiquiti Users Group <ubnt_users@wispa.org> Subject: Re: [Ubnt_users] airfiber 3 We had considered using the 3.65 dishdual slant is certainly a good idea. Heck, that might even be pretty good for 2.4 ghz - Original Message - From: Jon Langeler To: Ubiquiti Users Group Sent: Wednesday, June 22, 2016 8:54 PM Subject: Re: [Ubnt_users] airfiber 3 I've had success doing it 2-3 times. Even with M series radios in the mix. Use dual slant for sure. Jon Langeler Michwave Technologies, Inc. On Jun 22, 2016, at 9:41 PM, CBB - Jay Fuller <par...@cyberbroadband.net> wrote: Anyone using this? Looking to go about a mile through light trees. Maybe a mile and a half. I know I was able to get upper 50s on 2.4 signal on a previous installation. I'd like to get the 300 meg. I need as much bandwidth as possible. Any reports would be fantastic. 2.4 is an option too if I must... ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
We had considered using the 3.65 dishdual slant is certainly a good idea. Heck, that might even be pretty good for 2.4 ghz - Original Message - From: Jon Langeler To: Ubiquiti Users Group Sent: Wednesday, June 22, 2016 8:54 PM Subject: Re: [Ubnt_users] airfiber 3 I've had success doing it 2-3 times. Even with M series radios in the mix. Use dual slant for sure. Jon Langeler Michwave Technologies, Inc. On Jun 22, 2016, at 9:41 PM, CBB - Jay Fuller <par...@cyberbroadband.net> wrote: Anyone using this? Looking to go about a mile through light trees. Maybe a mile and a half. I know I was able to get upper 50s on 2.4 signal on a previous installation. I'd like to get the 300 meg. I need as much bandwidth as possible. Any reports would be fantastic. 2.4 is an option too if I must... ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] airfiber 3
I've had success doing it 2-3 times. Even with M series radios in the mix. Use dual slant for sure. Jon Langeler Michwave Technologies, Inc. > On Jun 22, 2016, at 9:41 PM, CBB - Jay Fuller> wrote: > > > Anyone using this? Looking to go about a mile through light trees. Maybe a > mile and a half. > I know I was able to get upper 50s on 2.4 signal on a previous installation. > > I'd like to get the 300 meg. I need as much bandwidth as possible. > > Any reports would be fantastic. > > 2.4 is an option too if I must... > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users