Re: [RCU] Message date is blank
I didn't know that timezones can have 2 forward slashes in their name. Maybe test if replacing "America/Kentucky/Louisville" with "America/New_York" in your configuration makes any difference? Kr, Vincent On 2021-10-14 21:51, Andrew K. Mitchell wrote: Hello, Thank you for your advice. You gave us four things to try. Unfortunately none of the four successfully resolved our issue. The header of the date field is visible, but no date is shown. For simplicity I will address each of the four individually. 1) Tried other skins in roundcube? Yes we have tried classic, larry, and elastic. Larry and classic have a place for the date but the date is blank. 2) Looked at raw email headers, confirmed there is a Date: header? Yes, an output of a message header is below. Return-path: Envelope-to: t...@americanappraisers.net Delivery-date: Thu, 14 Oct 2021 14:25:44 -0400 Received: from mx1.voipster.org ([192.40.140.7]) by hcp.as32030.net with esmtps (TLS1.2) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.93) (envelope-from ) id 1mb5QE-00022a-8O for t...@americanappraisers.net; Thu, 14 Oct 2021 14:25:44 -0400 Received: from mx1.voipster.org (localhost [IPv6:::1]) by mx1.voipster.org (Postfix) with ESMTPS id 78CD1140056 for ; Thu, 14 Oct 2021 14:25:36 -0400 (EDT) Received: from localhost (localhost [IPv6:::1]) by mx1.voipster.org (Postfix) with ESMTP id 10BFA140055 for ; Thu, 14 Oct 2021 14:25:36 -0400 (EDT) DKIM-Filter: OpenDKIM Filter v2.10.3 mx1.voipster.org 10BFA140055 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=voipster.org; s=AF861060-7096-11E7-A4EB-C0C20430CD90; t=1634235936; bh=eFevHDBk/PBz7/AQEaL87F6rVKiJvB7tuSdIAvf39k4=; h=MIME-Version:Date:From:Message-ID:To; b=n/QSBU5PPRBtfisjYVPjfndl0511oezYwsQ4VELptSUirp8MoRSeG2AIFWcMrVgvA Sd1fW9aGqF0eqzVMvdrtpyve9ypHwCRSELNbgKIIZGfi2vo4smh6IvrYQdHoZUJ4ZY 0SkJecpMUKewWSjfRqvuAz68wpQnmBkI36uc8dP7BjWoPovlQqpd3AkoQArkjFTe8s 2g5ED3n1JQr1kyoQDLprH2Rx44dpA/eUPGSGTpD8nRiP1Zi+kkg3QoDZqWbejpSkMx gNlnXOKl8bORul5RFe6k/lGFp3eb8afL7UNi9vIDJvtJ6SvArKBSPxyDBdwC1k0to1 6yJe7wy/XI7ww== X-Virus-Scanned: amavisd-new at mx1.voipster.org Received: from mx1.voipster.org ([IPv6:::1]) by localhost (mx1.voipster.org [IPv6:::1]) (amavisd-new, port 10026) with ESMTP id tqCTVCTF18dV for ; Thu, 14 Oct 2021 14:25:35 -0400 (EDT) Received: from localhost (45-45-168-4.ipv4.sdf.as32030.net [45.45.168.4]) by mx1.voipster.org (Postfix) with ESMTPSA id 5B577140032 for ; Thu, 14 Oct 2021 14:25:35 -0400 (EDT) MIME-Version: 1.0 Date: Thu, 14 Oct 2021 14:25:33 -0400 From: Jonathan Owens Subject: Test Thread-Topic: Test Message-ID: <70c06640-8fe7-3944-a03d-56c1aa550...@hxcore.ol> To: Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="utf-8" X-Spam-Score: 7 X-Spam-Bar: / X-Spam-Report: Spam detection software, running on the system "hcp.as32030.net", has NOT identified this incoming email as spam. The original message has been attached to this so you can view it or label similar future email. If you have any questions, see the administrator of that system for details. 3) In roundcube config.inc.php file, check $config['list_cols'] has "date" listed in the array? When I do a search for the list_cols array, below is the output that is returned; [root@hcp config]# grep list_cols defaults.inc.php $config['list_cols'] = array('subject', 'status', 'fromto', 'date', 'size', 'flag', 'attachment'); As you can see, date is listed as an element in the array. 4) Or confirmed the default (defaults.inc.php) has "date" and isn't being over written? Below is the output of ls -al /usr/share/roundcubemail/config. [root@hcp config]# ls -al /usr/share/roundcubemail/config total 76 drwxr-xr-x 2 root root 117 Oct 14 15:10 . drwxr-xr-x 13 root root 4096 Sep 16 08:00 .. -rw-r--r-- 1 root root 3986 Oct 14 15:10 config.inc.php -rw-r--r-- 1 root root 3941 Sep 16 08:23 config.inc.php.save -rw-r--r-- 1 root root 55838 Feb 8 2021 defaults.inc.php -rw-r--r-- 1 root root 164 Feb 8 2021 .htaccess -rw-r--r-- 1 root root 2815 Feb 8 2021 mimetypes.php [root@hcp config]# I don't see anywhere in any of those files where date is being overwritten. If that's not what you mean could you explain further? I thank everyone for the advice already given and I am grateful for any additional advice anyone can give. I do need to find a resolution for this issue. Thank you Respectfully, Andrew K. Mitchell, MSISPM President & Senior Network Engineer Global Network Operations VoIPster Communications US Toll-Free: +1.844-991-VoIP (8647) x2221 International: +1.502-991-VoIP (8647) x2221 US & International Fax: +1.502-379-4303 LPI ID: LPI70651 ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net
Re: [RCU] Signature in Webmail 0.8.1
Gee, I wonder why people need to spend time debating whether they should remove you from a mailing list for (1) lack of contribution, (2) ad hominem attacks, (3) misguided advice and (4) troll-bait. https://pagure.io/CoC/issue/6 Congratulations, you're the first one *ever* to make it to my ignore-list. @list: If this kind of behaviour is tolerated, then I'm out. On 2020-08-31 10:07, Reindl Harald wrote: Am 31.08.20 um 08:54 schrieb Vincent Van Houtte: On 2020-08-28 11:11, Reindl Harald wrote: Am 28.08.20 um 10:28 schrieb Vincent Van Houtte: If that is not an option, you can also clone the 0.8.1 database and run the database upgrade script on the clone. I don't think you should expect difficulties, but I grew up with Windows 98, ME and XP - although I have moved to linux almost 20 years ago, I still prefer clean installs over upgrades... ;) wtf - a dist-upgrade on modern hardware takes a few minutes, most of my machines are installed with Fedora 9 and now running Fedora 32 because i have no time to repeat all my customizations and hardening again and waste hundrests of hours when you install a linux from scratch without a damnd good reason it's a mental poverty certificate Not sure if this last comment was entirely necessary. it was when someone handles Linux like Windows and seems to be proud of that - frankly i even didn't re-install windows all the time back as i used it Kudos for you if you found dist-upgrade to be the tool of choice for you. I manage my systems with fully idempotent Ansible playbooks in other words you are throwing complexity in the game to fix your lack of capabilities not ruin your systems installing from scratch AND applying all customizations takes about 1 hour, on all machines in parallel. No need for dist-upgrade. show me how you install from scratch without services down while a dist-upgrade tzakes 2 minutes and a reboot of my servers 5-8 seconds as for any ordianry kernel update in 20 years i saw no single reason to re-install any linux - period -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Signature in Webmail 0.8.1
On 2020-08-28 11:11, Reindl Harald wrote: Am 28.08.20 um 10:28 schrieb Vincent Van Houtte: If that is not an option, you can also clone the 0.8.1 database and run the database upgrade script on the clone. I don't think you should expect difficulties, but I grew up with Windows 98, ME and XP - although I have moved to linux almost 20 years ago, I still prefer clean installs over upgrades... ;) wtf - a dist-upgrade on modern hardware takes a few minutes, most of my machines are installed with Fedora 9 and now running Fedora 32 because i have no time to repeat all my customizations and hardening again and waste hundrests of hours when you install a linux from scratch without a damnd good reason it's a mental poverty certificate Not sure if this last comment was entirely necessary. Kudos for you if you found dist-upgrade to be the tool of choice for you. I manage my systems with fully idempotent Ansible playbooks, so installing from scratch AND applying all customizations takes about 1 hour, on all machines in parallel. No need for dist-upgrade. -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Signature in Webmail 0.8.1
I believe the configuration file can be used to set defaults for all users + you mentioned that only you and two friends are actually using Roundcube, so that should be manageable as a tradeoff to start from a squeaky clean installation, no? If that is not an option, you can also clone the 0.8.1 database and run the database upgrade script on the clone. I don't think you should expect difficulties, but I grew up with Windows 98, ME and XP - although I have moved to linux almost 20 years ago, I still prefer clean installs over upgrades... ;) Vincent On 2020-08-27 22:57, Mario Jorge Lima wrote: Vincent, As for item 3, I asked about those customizations made by each user. How to transfer from the old to the new version? Mario./ At 17:18 27/08/2020, you wrote: Do it manually - you won't regret it: 1. Download and install the new version in a new location (instructions can be found on the website) 2. Create a new database 3. Manually copy the relevant configuration strings into the new configuration file and save it 4. set up a secondary domain for the new webmail version 5. As soon as the new version is working as you expect it, shut down the old version. Multiple versions can work independently from each other, as they are just another IMAP client towards the server. Kr, Vincent On 2020-08-27 21:46, Mario Jorge Lima wrote: Hi, I have this old version 0.8.1 installed, and as a matter of fact, just me and two friends really use it. But now we think on increase its usage in our school. My question: In order to upgrade to current version, which I think it is 1.4.8, what would be the right procedure? How to transfer the configuration from the old to this new one, including the accounts configuration? Is there any tutorial? Thanks. Mario./ At 10:16 27/08/2020, Giles Coochey wrote: Content-Type: multipart/alternative; boundary="74CAE17AA814375BEEECB1AD" Content-Language: en-GB I doubt that version is going to be supported. Please check what you may be exposing yourself to: https://www.cvedetails.com/vulnerability-list/vendor_id-8905/Roundcube.html [1] On 27/08/2020 13:35, Mario Jorge Lima wrote: Hello, I use a very old version of Roundcube, 0.8.1, and it works for me. I never tried to update it because I don't want, at that moment, to have new problems that I don't have now. I was wondering how to put a signature on this version. I looked through all the menu items and didn't find them. can anybody help me? Thanks a lot in advance. Mario Lima./ ___ Mario Jorge Lima mariol...@multisites.com.br OBS: Eventualmente nao acentuo algumas palavras do Portugues, para evitar bugs na recepcao dos emails. ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users [2] -- Giles Coochey ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users [2] ___ Mario Jorge Lima mariol...@multisites.com.br OBS: Eventualmente nao acentuo algumas palavras do Portugues, para evitar bugs na recepcao dos emails. ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users [2] -- Vincent Van Houtte ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users [2] ___ Mario Jorge Lima mariol...@multisites.com.br OBS: Eventualmente nao acentuo algumas palavras do Portugues, para evitar bugs na recepcao dos emails. ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users -- Vincent Van Houtte Links: -- [1] https://www.cvedetails.com/vulnerability-list/vendor_id-8905/Roundcube.html [2] http://lists.roundcube.net/mailman/listinfo/users___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Signature in Webmail 0.8.1
Do it manually - you won't regret it: 1. Download and install the new version in a new location (instructions can be found on the website) 2. Create a new database 3. Manually copy the relevant configuration strings into the new configuration file and save it 4. set up a secondary domain for the new webmail version 5. As soon as the new version is working as you expect it, shut down the old version. Multiple versions can work independently from each other, as they are just another IMAP client towards the server. Kr, Vincent On 2020-08-27 21:46, Mario Jorge Lima wrote: Hi, I have this old version 0.8.1 installed, and as a matter of fact, just me and two friends really use it. But now we think on increase its usage in our school. My question: In order to upgrade to current version, which I think it is 1.4.8, what would be the right procedure? How to transfer the configuration from the old to this new one, including the accounts configuration? Is there any tutorial? Thanks. Mario./ At 10:16 27/08/2020, Giles Coochey wrote: Content-Type: multipart/alternative; boundary="74CAE17AA814375BEEECB1AD" Content-Language: en-GB I doubt that version is going to be supported. Please check what you may be exposing yourself to: https://www.cvedetails.com/vulnerability-list/vendor_id-8905/Roundcube.html [1] On 27/08/2020 13:35, Mario Jorge Lima wrote: Hello, I use a very old version of Roundcube, 0.8.1, and it works for me. I never tried to update it because I don't want, at that moment, to have new problems that I don't have now. I was wondering how to put a signature on this version. I looked through all the menu items and didn't find them. can anybody help me? Thanks a lot in advance. Mario Lima./ ___ Mario Jorge Lima mariol...@multisites.com.br OBS: Eventualmente nao acentuo algumas palavras do Portugues, para evitar bugs na recepcao dos emails. ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users -- Giles Coochey ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users [2] ___ Mario Jorge Lima mariol...@multisites.com.br OBS: Eventualmente nao acentuo algumas palavras do Portugues, para evitar bugs na recepcao dos emails. ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users -- Vincent Van Houtte Links: -- [1] https://www.cvedetails.com/vulnerability-list/vendor_id-8905/Roundcube.html [2] http://lists.roundcube.net/mailman/listinfo/users___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] filter by header
So, you're actually confirming that 'filter by header' is working correctly, but that it is not sufficient as a measure against spam? I believe you should direct your attention to configuring a spamfilter such as spamassassin or spamd on your mailserver and then train that spamfilter to become better at catching spam - this is not really something you want a mailclient to handle. HTH, Vincent On 2019-11-12 22:38, Marchello wrote: Hi all, How do I create filter by header? I installed filters plugin and I can see $config['spam_headers'] = array('X-Spam-Flag','X-Spam-Status','X-Yandex-Spam'); line in my configuration file /var/www/html/example.com/roundcube/plugins/filters/config.inc.php I don't have any of these headers like X-Spam-Flag, X-Spam-Status, X-Yandex-Spam. But I have Delivered-To header that shows my userna...@gmail.com So I tried to add ,'Delivered-To' into config line, then created filter If the field [Delivered-To] contains gmail move the message to Inbox.gmail from Inbox (Messages: All, Mark: As read) But it didn't work for me. The problem is that some smart spammers do not include my email address into To: or Cc: field, so I can't filter it (those that include it go to needed folder indeed). Please advise. Best, Marchello ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] publically verifying roundcube-provided gpg key?
On 2019-07-31 21:50, David Mehler wrote: Hello, I'm running roundcube and the enigma plugin. I've created a private/public key for my user. I'd like to get that key to a keyserver so that anyone receiving the message can verify it if they want to? This hardly relates to roundcube, but here goes: https://security.stackexchange.com/questions/406/how-should-i-distribute-my-public-key $ gpg --keyserver hkp://keyserver.ubuntu.com --send-key "your key_index or email" $ gpg --keyserver hkp://pgp.mit.edu --send-key "your key_index or email" $ gpg --keyserver hkp://pool.sks-keyservers.net --send-key "your key_index or email" or, if you use seahorse in Gnome to manage your personal key, this has already been done for you automatically. -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] managesieve-plugin closes connection before negotiation
Hi FLorian, Interested in this as well. Looking through my config, I remember I did not find a working config to set up authentication, so I just set it to 'none' and blocked the 4190 port in my firewall (Dovecot and Apache/Roundcube are on the same box). This of course blocks other MUA's as well. My roundcube configuration is at version 1.4b - yours? Kr, Vincent On 2019-07-31 17:14, Florian Ruhnke (OiledAmoeba) wrote: Hi, I do have an running dovecot-sieve installation. There is no problem to use it with rainloop or Thunderbird. But I can't get roundcube to work with sieve. Dovecot forces to initiate TLS before auth. SSL is disabled, only TLS 1.2+ is enabled. sieve-log of roundcube: [31-Jul-2019 16:24:29 +0200]: S: "IMPLEMENTATION" "Dovecot Pigeonhole" [31-Jul-2019 16:24:29 +0200]: S: "SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve vnd.dovecot.imapsieve" [31-Jul-2019 16:24:29 +0200]: S: "NOTIFY" "mailto" [31-Jul-2019 16:24:29 +0200]: S: "SASL" "" [31-Jul-2019 16:24:29 +0200]: S: "STARTTLS" [31-Jul-2019 16:24:29 +0200]: S: "VERSION" "1.0" [31-Jul-2019 16:24:29 +0200]: S: OK "Doctor, your Tardis is ready." [31-Jul-2019 16:24:29 +0200]: C: STARTTLS [31-Jul-2019 16:24:29 +0200]: S: NO "Error in MANAGESIEVE command received by server." [31-Jul-2019 16:24:29 +0200]: C: LOGOUT [31-Jul-2019 16:24:29 +0200]: S: OK "Begin TLS negotiation now." maillog (dovecot errors): Jul 31 16:24:29 mail dovecot: managesieve-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=10.23.102.80, lip=10.23.102.251, TLS handshaking: SSL_accept() failed: error:1408F10B:SSL routines:ssl3_get_record:wrong version number, session= managesieve config.inc.php: $config['managesieve_port'] = 4190; $config['managesieve_host'] = 'mail.domain.tld'; $config['managesieve_auth_type'] = 'PLAIN'; $config['managesieve_auth_cid'] = null; $config['managesieve_auth_pw'] = null; $config['managesieve_usetls'] = true; //$config['managesieve_conn_options'] = null; $config['managesieve_conn_options'] = array( 'ssl' => array( 'verify_peer' => true, 'verify_peer_name' => true, 'allow_self_signed' => false, ), ); $config['managesieve_default'] = '/etc/dovecot/sieve/global'; $config['managesieve_script_name'] = 'managesieve'; $config['managesieve_mbox_encoding'] = 'UTF-8'; $config['managesieve_replace_delimiter'] = ''; $config['managesieve_disabled_extensions'] = array(); $config['managesieve_debug'] = true; $config['managesieve_kolab_master'] = false; $config['managesieve_filename_extension'] = '.sieve'; $config['managesieve_filename_exceptions'] = array(); $config['managesieve_domains'] = array(); $config['managesieve_vacation'] = 1; $config['managesieve_vacation_interval'] = 0; $config['managesieve_vacation_addresses_init'] = false; $config['managesieve_vacation_from_init'] = false; $config['managesieve_notify_methods'] = array('mailto'); $config['managesieve_raw_editor'] = true; The dovecot-log looks like roundcube is trying to initiate SSL3 but this is disabled. I think "Error in MANAGESIEVE command received by server." has to do with the deactivated SSL. Connecting to dovecot manually with gnutls-cli --starttls -p 4190 mail.domain.tld: Processed 306 CA certificate(s). Resolving 'mail.domain.tld:4190'... Connecting to ':4190'... - Simple Client Mode: "IMPLEMENTATION" "Dovecot Pigeonhole" "SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate m ime foreverypart extracttext imapsieve vnd.dovecot.imapsieve" "NOTIFY" "mailto" "SASL" "" "STARTTLS" "VERSION" "1.0" OK "Doctor, your Tardis is ready." NO "Error in MANAGESIEVE command received by server." STARTTLS OK "Begin TLS negotiation now." *** Starting TLS handshake - Certificate type: X.509 - Got a certificate list of 2 certificates. - Certificate[0] info: - subject `CN=mail.domain.tld', issuer `CN=Let's Encrypt Authority X3,O=Let's Encrypt,C=US', serial 0x03c0d3d322307e5a997f654b435b56480773, RSA key 4096 bits, signed using RSA-SHA256, activated `2019-06-06 09:18:10 UTC', expires `2019-09-04 09:18:10 UTC', pin-sha256="8Sl17lWxWYSJcTcppQG4DLSBhEP/uRkZ5NTQfdkkoS4=" Public Key ID: sha1:62b08cf75ae6c45915db8d8c7bff6947788ac3b2 sha256:f12975ee55b1598489713729a501b80cb4818443ffb91919e4d4d07dd924a12e Public Key PIN: pin-sha256:8Sl17lWxWYSJcTcppQG4DLSBhEP/uRkZ5NTQfdkkoS4= - Certificate[1] info: - subject `CN=Let's Encrypt Authority X3,O=Let's Encrypt,C=US', issuer `CN=DST Root CA X3,O=Digital Signature Trust Co.', serial 0x0a014142015385736a0b85eca708, RSA key 2048 bits, signed using RSA-SHA256, activated `2016-03-17 16:40:46 UTC', expires `2021-03-17 16:40:46 UTC',
Re: [RCU] managesieve redux
On 2019-06-25 03:20, lbutlr wrote: enabled the managesieve plugin, and it shows up in the settings as "Filters". When I login to an account (already has a active sieve file) and click on filters, I get: "An error occurred!Close Unable to connect to server." The rest of roundcube seems to be working in terms of reading and replying to mail. Are the configuration options unique to roundcube manage sieve that I need to change for my setup? Did you try this? https://www.benhup.com/freebsd/sieve-mail-filter-and-vacation-notice-in-roundcube-webmail/ Kr, Vincent -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] strtotime()
On 2019-04-14 21:52, Andreas Meyer wrote: [...] but please set date.timezone to select your timezone. [...] Did you? This is one of the few settings PHP requires you to configure with every new install, independently from any hardening you would want to do on your side. -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Slow forwarding of HTML messages
On 2019-03-04 16:40, Alexey wrote: I have no idea, what's happens past 8 seconds. Can you check your SMTP / LMTP / SPAMfilter-of-your-choice logs? Maybe you need to enable debugging logs. I noticed slow sending of emails containing attachments and fixed it by configuring my SMTP server (exim4) to not scan outgoing messages for SPAM. For me, the issue surfaced when I upgraded my Debian Jessie server to Debian Stretch. Kr, Vincent -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Roundcube Webmail 1.4 RC1 released
On 2019-02-28 21:35, Thomas Bruederli wrote: Dear subscribers We just published a first release candidate for the next major version 1.4 which has now been in development for quite a while. Although the new responsive Elastic skin is now functional and feature complete, it still lacks the final brush-up to make it shine. We have now finally found a volunteer to work on this and once completed, a second release candidate will follow. For now you're all invited to give the new 1.4 version another test run. Besides the responsive theme it comes with lots of new features and improvements since the beta release. Check the Changelog [1] for a complete list of changes. [...] [1] https://github.com/roundcube/roundcubemail/releases/tag/1.4-rc1 Thank you for this! I'm using 1.4b for a while now (and did not encounter anything I considered a bug) - is there a specific upgrade path I should follow, or should it be sufficient to just overwrite the $INSTALL location with the new files? Kr, Vincent -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Migrating mailserver roundcubemail going from v 1.0.3 to 1.1.12
On 2019-02-10 04:34, Robert Moskowitz wrote: The question is has the mysql database definitions changed between these versions? Can I simply copy the mysql database file from the old server to the new server? Any thing I should watch out for if I do this for migration? I would suggest to follow the upgrade manual posted on the wiki: https://github.com/roundcube/roundcubemail/wiki/Upgrade I believe the database schema has changed, but the installer (if you have enabled it) should pick this up and run the update database script. If not, you could just try to run the script manually - the script is located in the ./bin directory IIRC (you did dump your database, right?) Why are you not upgrading to the 1.3 branch? I just installed 1.4b (admittedly on a very low traffic server) and it runs wonderfully. HTH, Vincent -- Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] log imap activity
Please consider configuring that on the imap server and not on one of the clients. Kr, Vincent Sent from a mobile device. Anton Gorlov schreef >Hi! >Whai is right way to log imap activity? >need log delete mail,folders and login (mail), ip of client >___ >Roundcube Users mailing list >users@lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] php fatal error
RC fails to retrieve/access the storage location for maildata. Check RC configuration and filesystem permissions? Kr, Vincent Sent from a mobile device. Web Analysts schreef >Setting up RC 1.33 on linux. Test send/imap connect fine. When I login >however no email or folders are listed whatsoever. My RC error log shows > > > >[04-Jan-2019 15:54:22 America/Los_Angeles] PHP Fatal error: Call to a >member function get_folder() on a non-object in >/var/www/html/roundcube/public_html/program/steps/mail/compose.inc on line >63 > >[04-Jan-2019 15:54:22 America/Los_Angeles] PHP Stack trace: > >[04-Jan-2019 15:54:22 America/Los_Angeles] PHP 1. {main}() >/var/www/html/roundcube/public_html/index.php:0 > >[04-Jan-2019 15:54:22 America/Los_Angeles] PHP 2. include_once() >/var/www/html/roundcube/public_html/index.php:303 > > > >Please advise. Thank you! > > >___ >Roundcube Users mailing list >users@lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Request check failed
Hi Michael, Did you ask the user to log out and then back in? That's what Google suggests. Google also seems to suggest 'solutions' to disable csrf. Kr, Vincent Sent from my smartphone Michael Orlitzky schreef >What are we supposed to do when our users call in and say they're seeing >the CSRF failure page? The error message says to contact the server >administrator... > > For your protection, access to this resource is secured against CSRF. > If you see this, you probably didn't log out before leaving the web > application. Human interaction is now required to continue. Please > contact your server-administrator. > >Is there a way to turn the CSRF protection off? Or at least a way to >reset it when it goes stupid? I'm ready to human interaction. >___ >Roundcube Users mailing list >users@lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] can't login after upgrade
On 2018-10-08 18:15, Reindl Harald wrote: Am 08.10.18 um 17:14 schrieb Vincent Van Houtte: These errors clearly say that the user 'arcgraph' does not exist, that RC wants to create the user by logging in (I don't believe this is default - an unknown user should just be rejected imho), and that the subsequent attempt to create that user fails. There is also the mention of a plugin that may interfere here. Can you disable all plugins for the sake of testing? bullshit Field 'alias' doesn't have a default value (SQL Query: INSERT INTO `users` (`created`, `last_login`, `username`, `mail_host`, `language`) VALUES (now(), now(), 'arcgraph', 'www.arcgraphics.ch', 'en_US') the table has a column 'alias' with no default value which is not listed in the insert - mysql basics Although your assessment is correct, it misses the overall picture. The question relates to an existing installation that was merely updated. There is no reason why RC would need to create (INSERT INTO 'users') a new user upon login. Even if my suggestion would be wrong, I don't see any reason to use such language, especially from someone dissing the lack of respect of other people. Kind regards, Vincent ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] can't login after upgrade
On 2018-10-08 16:01, Meaulnes Legler @ roundcube wrote: thanks Vincent for your answer On 08.10.18 14:37, Vincent Van Houtte wrote: To your second question, you may want to look into Roundcube logging, f.e. I got the following, but it doesn't help me on... 506# tail roundcube/logs/errors ... [08-Oct-2018 14:32:12 +0200]: <345va73k> PHP Error: Failed to create new user in /home/.sites/106/site3/web/roundcube/program/lib/Roundcube/rcube_user.php on line 688 (POST /roundcube/?_task=login&_action=login) [08-Oct-2018 14:32:12 +0200]: <345va73k> PHP Error: Failed to create a user record. Maybe aborted by a plugin? in /home/.sites/106/site3/web/roundcube/program/include/rcmail.php on line 652 (POST /roundcube/?_task=login&_action=login) [08-Oct-2018 15:37:11 +0200]: <345va73k> DB Error: [1364] Field 'alias' doesn't have a default value (SQL Query: INSERT INTO `users` (`created`, `last_login`, `username`, `mail_host`, `language`) VALUES (now(), now(), 'arcgraph', 'www.arcgraphics.ch', 'en_US')) in /home/.sites/106/site3/web/roundcube/program/lib/Roundcube/rcube_db.php on line 543 (POST /roundcube/?_task=login&_action=login)[08-Oct-2018 15:37:11 +0200]: <345va73k> PHP Error: Failed to create new user in /home/.sites/106/site3/web/roundcube/program/lib/Roundcube/rcube_user.php on line 688 (POST /roundcube/?_task=login&_action=login) [08-Oct-2018 15:37:11 +0200]: <345va73k> PHP Error: Failed to create a user record. Maybe aborted by a plugin? in /home/.sites/106/site3/web/roundcube/program/include/rcmail.php on line 652 (POST /roundcube/?_task=login&_action=login) logs/errors lines 1-18/18 (END) 507# I don't know why this 'alias' field shows up here, I uninstalled and reinstalled RG, the database seems okay after bin/updatedb.sh --package roundcube --dir=./SQL and after bin/update.sh --package roundcube --dir=./SQL, it wished me Have fun! :-( Any clue? These errors clearly say that the user 'arcgraph' does not exist, that RC wants to create the user by logging in (I don't believe this is default - an unknown user should just be rejected imho), and that the subsequent attempt to create that user fails. There is also the mention of a plugin that may interfere here. Can you disable all plugins for the sake of testing? HTH, Vincent Thank you and best regards _~_ '¿') `-´ Meaulnes Legler Zurich, Switzerland +41\0 44 260 16 60 $config['per_user_logging'] = true; $config['log_session'] = true; $config['log_logins'] = true; $config['debug_level'] = 4; $config['sql_debug'] = true; $config['imap_debug'] = true; $config['imap_log_session'] = true; $config['ldap_debug'] = true; $config['smtp_log'] = true; $config['smtp_debug'] = true; This may help you retrieve more specific error codes Kr, Vincent On 2018-10-08 14:06, Meaulnes Legler @ roundcube wrote: dear RoundCubers it's me again, I still cannot login after an update to version 1.3.7... After googling the necessary bin/updatedb.sh params, I got: 497# bin/update.sh --package roundcube --dir=./SQL What version are you upgrading from? Type '?' if you don't know. ? WARNING: Mimetype to file extension mapping doesn't work properly! Please check the 'mime_types' config option and run this script again. Executing database schema update. Updating database schema (2013011000)... [OK] Updating database schema (2013042700)... [OK] Updating database schema (2013052500)... [OK] Updating database schema (2013061000)... [OK] Updating database schema (2014042900)... [OK] Updating database schema (2015030800)... [OK] Updating database schema (201500)... [OK] Updating database schema (2016081200)... [OK] Updating database schema (2016100900)... [OK] Updating database schema (2016112200)... [OK] This instance of Roundcube is up-to-date. Have fun! 498# I was all exited thinking it would work now, but it I didn't :-( Still get the « /!\ Login failed » error with the correct credentials. I uninstalled and reinstalled RC and went thru the same procedures -- no success. 2nd question: how can I get more specific error messages as just a lapidary « /!\ Login failed » ? Thank you and best regards Meaulnes Legler Zurich, Switzerland ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users Vincent Van Houtte Vincent Van Houtte ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] can't login after upgrade
To your second question, you may want to look into Roundcube logging, f.e. $config['per_user_logging'] = true; $config['log_session'] = true; $config['log_logins'] = true; $config['debug_level'] = 4; $config['sql_debug'] = true; $config['imap_debug'] = true; $config['imap_log_session'] = true; $config['ldap_debug'] = true; $config['smtp_log'] = true; $config['smtp_debug'] = true; This may help you retrieve more specific error codes Kr, Vincent On 2018-10-08 14:06, Meaulnes Legler @ roundcube wrote: dear RoundCubers it's me again, I still cannot login after an update to version 1.3.7... After googling the necessary bin/updatedb.sh params, I got: 497# bin/update.sh --package roundcube --dir=./SQL What version are you upgrading from? Type '?' if you don't know. ? WARNING: Mimetype to file extension mapping doesn't work properly! Please check the 'mime_types' config option and run this script again. Executing database schema update. Updating database schema (2013011000)... [OK] Updating database schema (2013042700)... [OK] Updating database schema (2013052500)... [OK] Updating database schema (2013061000)... [OK] Updating database schema (2014042900)... [OK] Updating database schema (2015030800)... [OK] Updating database schema (201500)... [OK] Updating database schema (2016081200)... [OK] Updating database schema (2016100900)... [OK] Updating database schema (2016112200)... [OK] This instance of Roundcube is up-to-date. Have fun! 498# I was all exited thinking it would work now, but it I didn't :-( Still get the « /!\ Login failed » error with the correct credentials. I uninstalled and reinstalled RC and went thru the same procedures -- no success. 2nd question: how can I get more specific error messages as just a lapidary « /!\ Login failed » ? Thank you and best regards Meaulnes Legler Zurich, Switzerland ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users Vincent Van Houtte ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] RCM appears to be the culprit for non-delivery of some emails to GMail addresses
Hi, Something seems off, and I would not suspect RC as the first culprit: * PEBKAC: if the receiver has set up rules to move certain emails to a folder that (s)he didn't check * PEBKAC: if the email is in a junkmail folder that wasn't checked * Qmail bug? Maybe increase log level? * Other bug? At my wife's office, we hit an Evolution bug last year that was known for many years, but apparently nobody cared enough to fix it until we were hit - the client reported that sending had succeeded, but exim never actually sent the email... In general, I don't believe Gmail would reject email and not warn either the sender or the recipient. Did you try the Gmail support form? https://support.google.com/mail/troubleshooter/2920052?hl=en If you want, I can give you my gmail.com address (off-list) so you can send a few testmails to me. I have 0 mail rules set up and know how to check a junkmail folder, so if that can help you solve the issue, I'd be more than happy to report to you what I did and did not receive. Kr, Vincent On 2018-09-03 10:16, Philip Rhoades wrote: People, This is my setup: Fedora 28 x86_64 workstation + Firefox <=> Fedora 26 x86_64 Server + RCM + QMail + multiple domains <=> Internet I have multiple email addresses for the multiple domains I run web sites and mailing lists for - last night when I mailed to someone from phr AT philiprhoades DOT org to a their GMail address - the mail was not delivered. I went through a bit of debugging with the recipient today and what I know so far is: - If I use RCM and the phr email address to send mail - even though the QMail logs say that the mail was successfully delivered - it never actually arrives - BUT no bounce message is ever received either. - If I use swaks on the server to send a test email from the phr address to the same person, it is delivered OK. - If I use qmail-inject on the server to send the original email that failed from its Maildir Sent dir to the same person, it is delivered OK. So it looks like something that RCM is adding to the headers is being objected to by the GMail servers or something - of course since nothing is ever actually delivered or bounced, I can't compare the header lines of the failed emails to the successful emails so I can't make any more progress trying to work out what the problem is. I have occasionally had rDNS issues but my diagnostics don't seem to fit that non-delivery issue . . anyone got any ideas? Is it possible that GMail servers can successfully accept emails but then silently fail to deliver them to recipients? Thanks, Phil. Vincent Van Houtte ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Roundcube 1.3.6 and set first time user email to domain, not imap host
Hi, This is a documented option. $config['mail_domain'] = '%d'; Kr, Vincent Sent from my smartphone Josef Karliak schreef > Good evening, > it is able to set somehow RC to us as a domain for new user only >domain ? > we use imap host (mail_host) "email.domain.cz". > user put username for example "johny" as an username, put password > in his profile setting in the roundcube he get email setting >"jo...@email.domain.cz". > How do I set "creating" of the email addres for a new users. We must >preserve imap host "email.domain.cz", but the user must have set up >@domain.cz > Thanks and best regards > J.Karliak > > >-- >Ma domena pouziva zabezpeceni a kontrolu SPF (www.openspf.org) a >DomainKeys/DKIM (s ADSP) a implementaci DMARC. Pokud mate problemy s >dorucenim emailu, zacnete pouzivat metody overeni puvody emailu >zminene vyse. Dekuji. >My domain use SPF (www.openspf.org) and DomainKeys/DKIM (with ADSP) >policy and implementation of the DMARC. If you've problem with sending >emails to me, start using email origin methods mentioned above. Thank >you. >___ >Roundcube Users mailing list >users@lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] installation php modues
On 2018-07-10 15:59, Teno Deuter wrote: Thnak you for your reply. Any idea why I get the: Mimetype to file extension mapping: NOT OK Google provides some hints. Did you try the solutions posted here? https://www.google.com/search?q=Mimetype+to+file+extension+mapping%3A++NOT+OK=utf-8=utf-8 Kind regards, Vincent Thank you Regarrds On Tue, Jul 10, 2018 at 1:45 PM, Reindl Harald wrote: just install the extension packages and make sure they are enabled in php.ini or a php.ini-dropin php -m Am 10.07.2018 um 13:20 schrieb Teno Deuter: in a OpenBSD 6.3 machine I run httpd and opensmptd and try to intall roundcubemail 1.3.5 from the OpenBSD packages repository. When running the installer, in the first page, I get following warnings: FileInfo: OK Libiconv: OK Intl: NOT AVAILABLE(See http://www.php.net/manual/en/book.intl.php) Exif: OK LDAP: NOT AVAILABLE(See http://www.php.net/manual/en/book.ldap.php) GD: NOT AVAILABLE(See http://www.php.net/manual/en/book.image.php) Imagick: NOT AVAILABLE(See http://www.php.net/manual/en/book.imagick.php) but pkg_info shows: php-gd-5.6.34 image manipulation extensions for php php-intl-5.6.34 intl library support for php and I think php-imagick is already part of the php OpenBSD package. Why do I get the above warnings? also, in the second installation page I get the following: Mimetype to file extension mapping: NOT OK but in httpd.conf, on the top of the file, I have the following entry: types { include "/usr/share/misc/mime.types" } ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users Vincent Van Houtte ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Cannot send mail via round cube
I second that. Verzonden vanaf mijn Sony Xperia™-smartphone Maarten schreef >I'm using letsencrypt certificates with roundcube and I'm not having any >issues. > > >On 03/01/2018 07:49 PM, ɹןʇnqן wrote: >> On Mar 1, 2018, at 09:21, NederHost/Sebastiaan Hoogeveen >>wrote: >>> The 'SSL alert number 48' indicates that the server certificate cannot be >>> verified due to being issued by an unknown CA. This is probably caused by a >>> missing, outdated or improperly configured CA bundle on the machine running >>> Roundcube. You should be able to reproduce the problem with openssl >>> s_client from that machine. >> It appears that roundcube doesn't like Let's Encrypt in a way that neither >> dovecot nor postfix (nor any of several MUAs) have an issue with >> >___ >Roundcube Users mailing list >users@lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Roundcubemail 1.3 and IMAP Idle
Google has (once again) all the answers: https://github.com/roundcube/roundcubemail/issues/1813 Vincent On 2017-08-10 10:51, Davide Perini wrote: > Hi all... > I have noticed that newer Rouncubemail 1.3 does not support IMAP Idle, > I'm not able to use it at least. > > As soon as I login to roundcube my maillog says this: > Aug 10 10:40:06 ooo dovecot: imap-login: Login: user=, method=PLAIN, > rip=::1, lip=::1, mpid=22185, secured, session= > Aug 10 10:40:06 ooo dovecot: imap(myuser): Disconnected: Logged out in=204 > out=1263 > > as you can see it disconnect as soon as it has logged in. > > Normal clients that support IMAP Idle shows different approach on my maillog, > something like this: > Aug 10 10:40:38 netstar dovecot: imap(perini.davide): Disconnected: > Disconnected in IDLE in=748 out=28168 > > Disconnected in IDLE is the keyword for what I am seaching for. > > Is it possible to use IMAP Idle on roundcube? > > Thanks, > Davide > ___ > Roundcube Users mailing list > users@lists.roundcube.net > http://lists.roundcube.net/mailman/listinfo/users Vincent Van Houtte___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] SMTP Error (554): ... (5.7.1 <em...@email.it>: Relay access denied)
There is a certain level of added risk if you do not verify the certificate, but for non-critical systems (that are secured properly nonetheless) I would assess this risk as acceptable. On the other hand: since Let's Encrypt started handing out free certificates, I don't see any reason to hold on to self-signed certificates. The process to acquire a new certificate and to periodically renew such certificate is pretty easy. Kr, Vincent Verzonden vanaf mijn Sony Xperia™-smartphone Davide Perini schreef >Ok I switched to the SMTP auth but since I have a self signed >certificate I have added those lines to my default.inc.php file: > >$config['smtp_conn_options'] = array( > 'ssl' => array( >'verify_peer' => false, >'verify_peer_name' => false, > ), >); > >and now it works. > >is this ok or I am creating some security problems or other type of >problems? > >Thanks, >Davide > >Il 2017-08-09 06:10 Vincent Van Houtte ha scritto: > >> Do you mean you're using php's mail()-function to send emails? In that case >> I suggest you read the changelog before you upgrade... >> >> Kr, >> Vincent >> >> Verzonden vanaf mijn Sony Xperia(tm)-smartphone >> >> Davide Perini schreef >> >> Nothing changed apart the roundcube version. >> >> In data 8 agosto 2017 22:39:02 mick crane <mick.cr...@gmail.com> ha scritto: >> >>> On 2017-08-08 21:07, Davide Perini wrote: >>>> Hi all, >>>> I use roundcubemail since years, I am running it on the latest Centos. >>>> >>>> As soon as I upgraded it to the 1.3 version I can't send email anymore >>>> using phpmail. >>>> >>>> When I try to send an email it says: >>>> "SMTP Error (554): ... "em...@email.it" non riuscito (5.7.1 [1] >>>> <sb...@email.it>: Relay access denied)" >>>> >>>> Can you help me please? >>> >>> if ISP some of them won't let you use "un-registered email addresses or >>> other SMTP servers. >>> maybe it is something like this if something changed ? >>> >>> >>> mick >>> >>> >>> >>> -- >>> ___ >>> Roundcube Users mailing list >>> users@lists.roundcube.net >>> http://lists.roundcube.net/mailman/listinfo/users >> >> ___ >> Roundcube Users mailing list >> users@lists.roundcube.net >> http://lists.roundcube.net/mailman/listinfo/users > > >Links: >-- >[1] tel:5.7.1___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] SMTP Error (554): ... (5.7.1 <em...@email.it>: Relay access denied)
Do you mean you're using php's mail()-function to send emails? In that case I suggest you read the changelog before you upgrade... Kr, Vincent Verzonden vanaf mijn Sony Xperia™-smartphone Davide Perini schreef >Nothing changed apart the roundcube version. > > > >In data 8 agosto 2017 22:39:02 mick craneha scritto: > >> On 2017-08-08 21:07, Davide Perini wrote: >>> Hi all, >>> I use roundcubemail since years, I am running it on the latest Centos. >>> >>> As soon as I upgraded it to the 1.3 version I can't send email anymore >>> using phpmail. >>> >>> When I try to send an email it says: >>> "SMTP Error (554): ... "em...@email.it" non riuscito (5.7.1 >>> : Relay access denied)" >>> >>> Can you help me please? >> >> if ISP some of them won't let you use "un-registered email addresses or >> other SMTP servers. >> maybe it is something like this if something changed ? >> >> >> mick >> >> >> >> -- >> ___ >> Roundcube Users mailing list >> users@lists.roundcube.net >> http://lists.roundcube.net/mailman/listinfo/users > >___ >Roundcube Users mailing list >users@lists.roundcube.net >http://lists.roundcube.net/mailman/listinfo/users ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users
Re: [RCU] Caldav/Carddav
On 2016-12-28 10:06, Emmanuel Revah wrote: Cool. Let's see what people have working and what can be done. The result I'm trying to get: Roundcube with calendars and contacts that are available through Caldav/Carddav protocols, so users can switch between RC and Thuderbird or "smartphone" clients with ease. I tried with OwnCloud first, but the calendar refused to work correctly with some other clients and the mail app is very limited, so I switched back to DAViCal as a caldav and carddav backend and have installed RoundCube as a frontend for both email and carddav (through the plugin that you mentioned). I have not been so lucky with the caldav-plugin, and apparently it is not working anymore with newer versions of RoundCube (although I don't remember where I have read this). This is my main concern, up maintaining and so on. BTW, if you have tips on using DAViCal I'd be happy to see them (I'm using Postfix/virtual), you can send them here or off-list. If you're using Debian, then the packages davical and libawl-php should be installed from the backports repo. It's extremely easy to follow the DAViCal installation guide and you'll be up and running in no time. Since this is not the place to discuss DAViCal, I'll send you my Apache virtualhost config privately. Combined with some DNS rules for autodiscovery, LDAP (and maybe Kerberos, which I haven't tried yet) for authentication and Let's Encrypt for SSL certificates, it's a robust platform. The only thing that is missing really is scheduling with external people, but a good calendaring client should be able to take care of this without the need for server-specific features. Another person replied to me as well (off-list, and I think it's possible that the ML software doesn't "do it's thing properly" (reply-to uses the original sender and not the ML's address)) My reply to the mailing list was bounced - you received the email because you are automatically cc-ed by RoundCube. It would seem that all we're missing is CalDav client support for at least a one-solution web front. With every release, the Nextcloud platform is getting closer to reaching that one-solution webfront. I didn't try it (very) recently, but if they nail the 'remote calendar' and 'remote addressbook' functionality, you could just keep using DAViCal and your mailserver software as the backend and travel back and forth between RoundCube+InfCloud and NextCloud as the frontend until one or the other has prevailed. Vincent ___ Roundcube Users mailing list users@lists.roundcube.net http://lists.roundcube.net/mailman/listinfo/users