Re: [ovirt-users] Modify the MacPoolRange : Former MACs?
- Original Message - From: Nicolas Ecarnot nico...@ecarnot.net To: Martin Mucha mmu...@redhat.com Cc: users@ovirt.org Sent: Wednesday, September 10, 2014 3:44:33 PM Subject: Re: [ovirt-users] Modify the MacPoolRange : Former MACs? Le 10/09/2014 13:36, Martin Mucha a écrit : just to add one more comment: nothing changes for MACs allocated using previous MacPoolRange. After MacPoolRange change, they will be treated like user specified MAC addresses, which also don't have to be part of any range. OK. I'm asking about banning, because I witnessed that when (ovirt-shell) provisionning a new VM and its nic with a MAC outside of the pool range, the adding gets refused. What is the rejection message ? Perhaps it is a mac address which is already in use by other vm ? I still dare not changing it unless you swear and sign it with your blood that this macpoolrange modification won't prevent me from running my existing VMs. m. - Original Message - From: Itamar Heim ih...@redhat.com To: Nicolas Ecarnot nico...@ecarnot.net, users@ovirt.org, Lior Vernia lver...@redhat.com Sent: Wednesday, September 10, 2014 12:43:12 PM Subject: Re: [ovirt-users] Modify the MacPoolRange : Former MACs? On 09/10/2014 09:47 AM, Nicolas Ecarnot wrote: Hi, I plan to extend the MacPoolRange. If I also completely change the pool, in a way that does not implies the previous setting, will the manager ban all the previous MACs, now outside the defined pool? (and stop the VMs?) Regards, no, just affect future mac allocations. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Modify the MacPoolRange : Former MACs?
- Original Message - From: Moti Asayag masa...@redhat.com To: Nicolas Ecarnot nico...@ecarnot.net Cc: Martin Mucha mmu...@redhat.com, users@ovirt.org Sent: Thursday, September 11, 2014 9:18:03 AM Subject: Re: [ovirt-users] Modify the MacPoolRange : Former MACs? - Original Message - From: Nicolas Ecarnot nico...@ecarnot.net To: Martin Mucha mmu...@redhat.com Cc: users@ovirt.org Sent: Wednesday, September 10, 2014 3:44:33 PM Subject: Re: [ovirt-users] Modify the MacPoolRange : Former MACs? Le 10/09/2014 13:36, Martin Mucha a écrit : just to add one more comment: nothing changes for MACs allocated using previous MacPoolRange. After MacPoolRange change, they will be treated like user specified MAC addresses, which also don't have to be part of any range. OK. I'm asking about banning, because I witnessed that when (ovirt-shell) provisionning a new VM and its nic with a MAC outside of the pool range, the adding gets refused. What is the rejection message ? Perhaps it is a mac address which is already in use by other vm ? Please note that currently the API doesn't support specifying network interfaces at vm creation [1], only after the vm is created, the user can add/update/delete vm network interfaces. So could you explain the scenario which lead to the rejection ? [1] https://bugzilla.redhat.com/show_bug.cgi?id=69 I still dare not changing it unless you swear and sign it with your blood that this macpoolrange modification won't prevent me from running my existing VMs. m. - Original Message - From: Itamar Heim ih...@redhat.com To: Nicolas Ecarnot nico...@ecarnot.net, users@ovirt.org, Lior Vernia lver...@redhat.com Sent: Wednesday, September 10, 2014 12:43:12 PM Subject: Re: [ovirt-users] Modify the MacPoolRange : Former MACs? On 09/10/2014 09:47 AM, Nicolas Ecarnot wrote: Hi, I plan to extend the MacPoolRange. If I also completely change the pool, in a way that does not implies the previous setting, will the manager ban all the previous MACs, now outside the defined pool? (and stop the VMs?) Regards, no, just affect future mac allocations. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] adding machine to openldap + kerberos with a keytab
Hi, We are doing significant rework within the authentication and authorization slot, most will be available in 3.5. In nut shell, there are two packages: ovirt-engine-extension-aaa-ldap - provider of authentication and authorization using ldap protocol. ovirt-engine-extnesion-aaa-misc - for misc support (see documentation). Integrating with ldap now does not require using kerberos, a preferred way is to use the ldap protocol using startTLS and basic authentication, as in this mode most ldap implementations returns valid result codes out of failures. GSSAPI is still supported, although I recommend to avoid, but if you insist... you can probably use keytab, I did not test this... but it should be available using, if it works, please tell me :) --- pool.default.auth.gssapi.useTicketCache = true pool.default.auth.gssapi.ticketCachePath = path-to-keytab --- As per single signon with apache, please refer to APACHE SSO CONFIGURATION within[1]. Any feedback will be appreciated. Regards, Alon Bar-Lev ovirt-engine-extension-aaa-ldap documentation [1] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README;hb=HEAD [2] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README.profile;hb=HEAD [3] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README.unboundid-ldapsdk;hb=HEAD ovirt-engine-extension-aaa-misc documentation [4] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-misc.git;a=blob;f=README.http;hb=HEAD [5] http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-misc.git;a=blob;f=README.mapping;hb=HEAD ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Free Memory In Hosts
On Wed, Sep 10, 2014 at 11:57:05PM +0300, Mohyedeen Nazzal wrote: Hi All, I have noticed that there is a huge difference between memory reading obtained from top or free commands, and values displayed on ovirt engine. Host Example: Engine Version : *ovirt-engine-3.4.3-1.el6.noarch* *OS: Centos 6.5_x86_64* *Used Memory:* *from free:* [root@oVirt ~]# free total used free sharedbuffers cached Mem: 65890412 65609864 280548 0 305408 53759412 from Egnine Webpage: only 12G is being used. Is there an explanation for this ? It's a Linux thing. When a file is opened, it is mapped into memory, but when it is closed Linux does not evict it before memory is released again. Thus, a long-running active host reaches 0 free mem sooner than later. For oVirt GUI, we found this misleading - there, free means how much memory is available for new VMs to use. Therefore oVirt reports buffred and cached memory as free, too. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Passing custom script to cloud init using api
On 09/11/2014 06:54 AM, Shanil S wrote: Hi Juan, It seems the it doesn't contains the phone_home section in the cat /mnt/openstack/latest/user_data the following is the output #cloud-config ssh_pwauth: true disable_root: 0 output: all: ' /var/log/cloud-init-output.log' user: root password: admin123 chpasswd: expire: false runcmd: - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo ''datasource_list: [NoCloud, ConfigDrive]'' /etc/cloud/cloud.cfg' but if i try with the files file nameignored/name content![CDATA[runcmd: - echo 'Test script !' /iwashere_test.txt ]]/content typeplaintext/type /file /files then it will create the /iwashere_test.txt and write the contents and in that time the cat /mnt/openstack/latest/user_data is cat /mnt/openstack/latest/user_data #cloud-config ssh_pwauth: true disable_root: 0 output: all: ' /var/log/cloud-init-output.log' user: root password: admin123 chpasswd: expire: false runcmd: - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo ''datasource_list: [NoCloud, ConfigDrive]'' /etc/cloud/cloud.cfg' runcmd: - echo 'Test script !' /iwashere_test.txt so, i think the custom script section is not working, i am attaching the vm log as a screenshot. Can you share the XML document that you sent to the RESTAPI in order to populate the phone_home section? On Wed, Sep 10, 2014 at 2:07 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 09/10/2014 06:44 AM, Shanil S wrote: Hi Juan, What i am planning to do is to make work the following script #cloud-config # phone_home: if this dictionary is present, then the phone_home # cloud-config module will post specified data back to the given # url # default: none # phone_home: # url: http://my.foo.bar/$INSTANCE/ # post: all # tries: 10 # phone_home: url: http://my.example.com/$INSTANCE_ID/ post: [ pub_key_dsa, pub_key_rsa, pub_key_ecdsa, instance_id ] (http://cloudinit.readthedocs.org/en/latest/topics/examples.html#run-commands-on-first-boot) but it wasn't working when i tried, i hope to post the above values to the specific url and get the posted details. I think it should work, but it depends completely on cloud-init itself. I'd suggest you check the content of the generated cloud-init configuration file (as described in a previous mail). If it contains the phone_home section then you can discard a problem with oVirt, and focus on clud-init. On Wed, Sep 10, 2014 at 10:02 AM, Shanil S xielessha...@gmail.com mailto:xielessha...@gmail.com mailto:xielessha...@gmail.com mailto:xielessha...@gmail.com wrote: Hi Juan, Okay.. Thanks.. its working. I would like to execute other page something like test_script.php by posting some values to it using the cloud init, Is it possible to do it ? -- Regards Shanil On Fri, Sep 5, 2014 at 10:08 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com mailto:jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 09/05/2014 12:55 PM, Shanil S wrote: Hi Juan, Thanks for your reply. I tried with the above but i was unable to find the 'iwashere.txt' after executing the above xml. I repeated the test, this time with 3.4, and it worked fine for me. As the formatting of the XML is very important I'd suggest that you take the attached script (instead of copy paste from the mail), change the password and VM id and run it. There are two kind of things that can go wrong here. One is that the engine/VDSM combination may not be generating the right file. To verify this start the VM with the attached script, and once it is started go to the hypervisor where it is running and find the corresponding qemu process: # ps -ef | grep -- '-name myvm' This will give you a very long command line. That command line should include a -drive option containing the full path of the disk image generated by the engine/VDSM, something like this: -drive file=/var/run/vdsm/payload/b5f087d4-022d-4d5f-8a1e-268c562c7bb1.b6fcddff571bb8c2028c61b623d172a6.img To inspect its content make a copy (just
[ovirt-users] FC QLogic question
Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don't. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex - if I need to do this, does anyone know of a nice and easy howto guide on this. I'm just getting started with ovirt and appreciate any help Thanks Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] How to import vm template
Hi, All I have configured an export NFS storage on old ovirt and export a vm template succeed. But how to import it to another new ovirt? -- Regards, John Xue ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] FC QLogic question
Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don’t. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex – if I need to do this, does anyone know of a nice and easy howto guide on this. I’m just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes – Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx]takes less than a minute* *ManageIQ User Guide available*[*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Passing custom script to cloud init using api
Hi Juan, Okay sure.. The following xml i used action vm os boot dev='cdrom'/ /os initialization cloud_init host addresstest2/address /host users user user_nameroot/user_name passwordtest/password /user /users network_configuration nics nic interfacevirtio/interface nameeth0/name boot_protocolnone/boot_protocol on_boottrue/on_boot /nic /nics dns servers host addressx.x.x.x/address /host /servers /dns /network_configuration /cloud_init custom_script #cloud-config phone_home: url: http://x.x.com/api/xx/api_receive.php /custom_script /initialization /vm /action -- Regards Shanil On Thu, Sep 11, 2014 at 1:48 PM, Juan Hernandez jhern...@redhat.com wrote: On 09/11/2014 06:54 AM, Shanil S wrote: Hi Juan, It seems the it doesn't contains the phone_home section in the cat /mnt/openstack/latest/user_data the following is the output #cloud-config ssh_pwauth: true disable_root: 0 output: all: ' /var/log/cloud-init-output.log' user: root password: admin123 chpasswd: expire: false runcmd: - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo ''datasource_list: [NoCloud, ConfigDrive]'' /etc/cloud/cloud.cfg' but if i try with the files file nameignored/name content![CDATA[runcmd: - echo 'Test script !' /iwashere_test.txt ]]/content typeplaintext/type /file /files then it will create the /iwashere_test.txt and write the contents and in that time the cat /mnt/openstack/latest/user_data is cat /mnt/openstack/latest/user_data #cloud-config ssh_pwauth: true disable_root: 0 output: all: ' /var/log/cloud-init-output.log' user: root password: admin123 chpasswd: expire: false runcmd: - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo ''datasource_list: [NoCloud, ConfigDrive]'' /etc/cloud/cloud.cfg' runcmd: - echo 'Test script !' /iwashere_test.txt so, i think the custom script section is not working, i am attaching the vm log as a screenshot. Can you share the XML document that you sent to the RESTAPI in order to populate the phone_home section? On Wed, Sep 10, 2014 at 2:07 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 09/10/2014 06:44 AM, Shanil S wrote: Hi Juan, What i am planning to do is to make work the following script #cloud-config # phone_home: if this dictionary is present, then the phone_home # cloud-config module will post specified data back to the given # url # default: none # phone_home: # url: http://my.foo.bar/$INSTANCE/ # post: all # tries: 10 # phone_home: url: http://my.example.com/$INSTANCE_ID/ post: [ pub_key_dsa, pub_key_rsa, pub_key_ecdsa, instance_id ] ( http://cloudinit.readthedocs.org/en/latest/topics/examples.html#run-commands-on-first-boot ) but it wasn't working when i tried, i hope to post the above values to the specific url and get the posted details. I think it should work, but it depends completely on cloud-init itself. I'd suggest you check the content of the generated cloud-init configuration file (as described in a previous mail). If it contains the phone_home section then you can discard a problem with oVirt, and focus on clud-init. On Wed, Sep 10, 2014 at 10:02 AM, Shanil S xielessha...@gmail.com mailto:xielessha...@gmail.com mailto:xielessha...@gmail.com mailto:xielessha...@gmail.com wrote: Hi Juan, Okay.. Thanks.. its working. I would like to execute other page something like test_script.php by posting some values to it using the cloud init, Is it possible to do it ? -- Regards Shanil On Fri, Sep 5, 2014 at 10:08 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com mailto:jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 09/05/2014 12:55 PM, Shanil S wrote: Hi Juan, Thanks for your reply. I tried with the above but i was unable to find the 'iwashere.txt' after executing the above xml. I repeated the test, this time with 3.4, and it worked fine for me. As the formatting
Re: [ovirt-users] Free Memory In Hosts
Hi, If you look at the full free output you will see another line: total used free sharedbuffers cached Mem: 80570047491980 565024 0 2345922005452 -/+ buffers/cache:52519362805068 The +/- buffers/cache tells you how much memory you will have available after you (the kernel) clean all buffers and caches. And that is the number we look at. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - On Wed, Sep 10, 2014 at 11:57:05PM +0300, Mohyedeen Nazzal wrote: Hi All, I have noticed that there is a huge difference between memory reading obtained from top or free commands, and values displayed on ovirt engine. Host Example: Engine Version : *ovirt-engine-3.4.3-1.el6.noarch* *OS: Centos 6.5_x86_64* *Used Memory:* *from free:* [root@oVirt ~]# free total used free sharedbuffers cached Mem: 65890412 65609864 280548 0 305408 53759412 from Egnine Webpage: only 12G is being used. Is there an explanation for this ? It's a Linux thing. When a file is opened, it is mapped into memory, but when it is closed Linux does not evict it before memory is released again. Thus, a long-running active host reaches 0 free mem sooner than later. For oVirt GUI, we found this misleading - there, free means how much memory is available for new VMs to use. Therefore oVirt reports buffred and cached memory as free, too. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] FC QLogic question
Thanks for responding Daniel. I was wondering and thought the message may be irrelevant. But yes, it doesn’t appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something…) on two hosts now and neither are working. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured… on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. Bill Dossett Virtualisation Architect Pitney Bowes – Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.demailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don’t. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex – if I need to do this, does anyone know of a nice and easy howto guide on this. I’m just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes – Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx]takes less than a minute* *ManageIQ User Guide available*[*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.dehttp://www.m-box.de www.monkeymen.tvhttp://www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt35 - deep dive - Monitoring (UI plugin) Dashboard (Integrated with Nagios monitoring)
BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Jerusalem BEGIN:STANDARD DTSTART:16010101T02 TZOFFSETTO:+0200 TZOFFSETFROM:+0300 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=10;BYDAY=-1SU TZNAME:IST END:STANDARD BEGIN:DAYLIGHT DTSTART:16010101T02 TZOFFSETTO:+0300 TZOFFSETFROM:+0200 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=3;BYDAY=-1FR TZNAME:IDT END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT UID:3c61508e-b7bd-439a-b0e5-a0149bfa974d SUMMARY:ovirt35 - deep dive - Monitoring (UI plugin) Dashboard (Integrated w ith Nagios monitoring) ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:anbabu@ redhat.com ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:sabose@ redhat.com ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:users@o virt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:devel@o virt.org ORGANIZER;CN=Barak Azulay:mailto:bazu...@redhat.com DTSTART;TZID=Asia/Jerusalem:20140915T16 DTEND;TZID=Asia/Jerusalem:20140915T17 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20140911T104308Z DTSTAMP:20140911T104308Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: ovirt35 - de ep dive - Monitoring (UI plugin) Dashboard (Integrated with Nagios monitorin g) \nOrganizer: Barak Azulay bazu...@redhat.com \n\nTime: Monday\, Septe mber 15\, 2014\, 4:00:00 PM - 5:00:00 PM GMT +02:00 Jerusalem\n \nInvitees: anb...@redhat.com\; sab...@redhat.com\; users@ovirt.org\; de...@ovirt.org \n \n\n*~*~*~*~*~*~*~*~*~*\n\nNagios has been integrated with ovirt-engine for monitoring the gluster deployments to enable the administrators\, \nto monit or the health of their deployments. The administrator can use the auto-confi g script to be able to automatically \nconfigure nagios for monitoring their gluster deployment(hosts\,volumes). \nThe ui-plugin manifests itself in the form of two tabs : \n1. Dashboard -- overall view of the deployment(Not in 3.5. Part of our plan for future release) \n2. Trends -- Graphs displayed in accordance with the selected entity on the system tree when the tab is open . \nIn this session we will go through the overall integration architecture\ ,auto-config script and the monitoring ui-plugin. \n\nGoogle hangout link: h ttps://plus.google.com/events/ccf2tev5tg5eh7ntelph95psuis \nWiki Link : http ://www.ovirt.org/Features/Nagios_Integration BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Passing custom script to cloud init using api
Hi Juan, Also, i tried the following custom script from the ovirt panel and its working #cloud-config write_files: -content: | # THIS IS MY TEXT FILE Some Content for my file path: /tmp/myfile permissions: '0644' but the same content script i tried from the ovir api call like custom_script#cloud-config write_files: -content: | # THIS IS MY TEXT FILE Some Content for my file path: /tmp/myfile permissions: '0644' /custom_script /initialization But its not working, may be this is a bug in the ovirt api function call ? -- Regards Shanil On Thu, Sep 11, 2014 at 3:36 PM, Shanil S xielessha...@gmail.com wrote: Hi Juan, Okay sure.. The following xml i used action vm os boot dev='cdrom'/ /os initialization cloud_init host addresstest2/address /host users user user_nameroot/user_name passwordtest/password /user /users network_configuration nics nic interfacevirtio/interface nameeth0/name boot_protocolnone/boot_protocol on_boottrue/on_boot /nic /nics dns servers host addressx.x.x.x/address /host /servers /dns /network_configuration /cloud_init custom_script #cloud-config phone_home: url: http://x.x.com/api/xx/api_receive.php /custom_script /initialization /vm /action -- Regards Shanil On Thu, Sep 11, 2014 at 1:48 PM, Juan Hernandez jhern...@redhat.com wrote: On 09/11/2014 06:54 AM, Shanil S wrote: Hi Juan, It seems the it doesn't contains the phone_home section in the cat /mnt/openstack/latest/user_data the following is the output #cloud-config ssh_pwauth: true disable_root: 0 output: all: ' /var/log/cloud-init-output.log' user: root password: admin123 chpasswd: expire: false runcmd: - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo ''datasource_list: [NoCloud, ConfigDrive]'' /etc/cloud/cloud.cfg' but if i try with the files file nameignored/name content![CDATA[runcmd: - echo 'Test script !' /iwashere_test.txt ]]/content typeplaintext/type /file /files then it will create the /iwashere_test.txt and write the contents and in that time the cat /mnt/openstack/latest/user_data is cat /mnt/openstack/latest/user_data #cloud-config ssh_pwauth: true disable_root: 0 output: all: ' /var/log/cloud-init-output.log' user: root password: admin123 chpasswd: expire: false runcmd: - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo ''datasource_list: [NoCloud, ConfigDrive]'' /etc/cloud/cloud.cfg' runcmd: - echo 'Test script !' /iwashere_test.txt so, i think the custom script section is not working, i am attaching the vm log as a screenshot. Can you share the XML document that you sent to the RESTAPI in order to populate the phone_home section? On Wed, Sep 10, 2014 at 2:07 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 09/10/2014 06:44 AM, Shanil S wrote: Hi Juan, What i am planning to do is to make work the following script #cloud-config # phone_home: if this dictionary is present, then the phone_home # cloud-config module will post specified data back to the given # url # default: none # phone_home: # url: http://my.foo.bar/$INSTANCE/ # post: all # tries: 10 # phone_home: url: http://my.example.com/$INSTANCE_ID/ post: [ pub_key_dsa, pub_key_rsa, pub_key_ecdsa, instance_id ] ( http://cloudinit.readthedocs.org/en/latest/topics/examples.html#run-commands-on-first-boot ) but it wasn't working when i tried, i hope to post the above values to the specific url and get the posted details. I think it should work, but it depends completely on cloud-init itself. I'd suggest you check the content of the generated cloud-init configuration file (as described in a previous mail). If it contains the phone_home section then you can discard a problem with oVirt, and focus on clud-init. On Wed, Sep 10, 2014 at 10:02 AM, Shanil S xielessha...@gmail.com mailto:xielessha...@gmail.com mailto:xielessha...@gmail.com mailto:xielessha...@gmail.com wrote: Hi Juan, Okay.. Thanks.. its working. I would like to execute other page something like test_script.php by posting some values to it using the cloud init, Is it possible to do
Re: [ovirt-users] FC QLogic question
I'm guessing my problems are to do with using the ovirt node hypervisor install from the ovirt web site to boot and configure from. I'm going to download CentOS 6.5 and setup that up and then put ovirt on top of it. I have used CentOS on these systems before and they were fine using the FC SAN. I get the feeling that NFS and iSCSI support is probably fine, but I the FC support may not be so good, well that's my guess anyway. Thanks again From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Bill Dossett Sent: 11 September 2014 11:17 To: Daniel Helgenberger Cc: users@ovirt.org Subject: Re: [ovirt-users] FC QLogic question Thanks for responding Daniel. I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. Bill Dossett Virtualisation Architect Pitney Bowes - Tech Central 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone (+44) (0)1923 279353 | VOIP: 54739353 Mobile (+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com/ In Engineering? Raise a ticket via Remedy Anywhere [HEREhttp://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx] takes less than a minute ManageIQ User Guide available [HEREhttps://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf] Check out the ManageIQ Blog for recent enhancements and information [HERE]http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.demailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don't. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex - if I need to do this, does anyone know of a nice and easy howto guide on this. I'm just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.commailto:bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.comhttp://www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx]takes less than a minute* *ManageIQ User Guide available*[*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.dehttp://www.m-box.de www.monkeymen.tvhttp://www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767
Re: [ovirt-users] FC QLogic question
On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn’t appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something…) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured… on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes – Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx]takes less than a minute* *ManageIQ User Guide available* [*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don’t. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex – if I need to do this, does anyone know of a nice and easy howto guide on this. I’m just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes – Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx]takes less than a minute* *ManageIQ User Guide available*[*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN
[ovirt-users] Fwd: FC QLogic question
Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain. Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something.) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured. on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident /newIncident.aspx]takes less than a minute* *ManageIQ User Guide available* [*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20 v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don't. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex - if I need to do this, does anyone know of a nice and easy howto guide on this. I'm just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incid ent/newIncident.aspx]takes less than a minute*
Re: [ovirt-users] How to import vm template
On 11/09/14 11:36, John Xue wrote: Hi, All I have configured an export NFS storage on old ovirt and export a vm template succeed. But how to import it to another new ovirt? detach the whole export storage domain, tar gz it, unpack it in new env, import export storage domain. HTH -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] FC QLogic question
Hi, there is an open bugreport on node that this firmware is missing, this is fixed in master branch: https://bugzilla.redhat.com/show_bug.cgi?id=1063001 my advice would be to install a plain centos 6.5 and to not use node atm. HTH On 11/09/14 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] qemu-kvm-rhev on EL machines for oVirt 3.4.z ?
On Wed, Sep 10, 2014 at 01:11:02PM +0200, Sven Kieske wrote: On 10/09/14 11:59, Allon Mureinik wrote: If we decide to move forward with this patch, we'll definitely provide qemu-kvm-rhev in the repo - the concern was indeed for users who don't have this enabled. So we are talking about users who don't use the official recommended way to install ovirt (using the repo ) but instead download everything and install by hand? Are there any such people? Maybe they even do not use yum but rpm directly, or want to compile from source? The purpose of this thread is to solicit objections to apossibly-distruptive change in a stable branch, not to disparage non-conventional deployments. If no one raises a serious objection, we can require qemu-kvm-rhev right after ovirt-3.4.4 is out. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Fwd: RE: FC QLogic question
Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain. Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident /newIncident.aspx]takes less than a minute* *ManageIQ User Guide available* [*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20 v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don't. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex - if I need to do this, does anyone know of a nice and easy howto guide on this. I'm just getting started with ovirt and appreciate any help Thanks *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE
Re: [ovirt-users] Fwd: RE: FC QLogic question
Hey Bill and Daniel, it would indeed be interesting - mandatory - to know if it's qla* or qxl (qxl is IMHO related to graphics). Once we know that I'll see if the bug below fixes it. I'd need your help to verify that we are also including all relevant dependencies. Thanks - fabian - Original Message - Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain. Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident /newIncident.aspx]takes less than a minute* *ManageIQ User Guide available* [*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20 v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem to have run into a problem setting up ovirt with Fibre Channel storage. I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems. Now booting with ovirtnode distro, I am seeing Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/. Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. Sep 9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2). Sep 9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A - GSI 16 (level, low) - IRQ 16 I have googled the firmware error and it says some cards need a firmware flash and some don't. These are pretty standard HBAs so I would think they would be supported out of the box, but maybe not. Looking at trying to add the firmware looked kind of complex - if I need to do this, does anyone know of a nice and easy howto guide on this. I'm just getting started with ovirt and appreciate any help Thanks *Bill
Re: [ovirt-users] Fwd: RE: FC QLogic question
Hey Daniel, - Original Message - On 11.09.2014 14:09, Fabian Deutsch wrote: Hey Bill and Daniel, it would indeed be interesting - mandatory - to know if it's qla* or qxl (qxl is IMHO related to graphics). Once we know that I'll see if the bug below fixes it. Hello Fabian, indeed this was my mistake; while typing the mail I was reading on the spice website - so qla is the correct module of course! I already replied this to Bill but forgot to cc the list also ... Also, for the node iso it would make little sense to have the qlx module loaded. For completeness, I attach my answer to Bill. Thanks :) So to summarize: The adapter is recognized on Node? But it does not show up in Engine? Thanks - fabian I'd need your help to verify that we are also including all relevant dependencies. Thanks - fabian - Original Message - On 11.09.2014 13:05, Bill Dossett wrote: Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one Indeed, sorry for that. lsscsi does list all of the LUNs... so that's working! Great! But nothing in ovirt engine when I try to add a storage domain. Please check back in ovirt engine, with Hosts / Hardware info. You should see the adapter there, along with WWN's ect. I am not quite sure, but AFAIK the node uses dm-multipath by default (for iscsi multipathing). So what does: # multipath -ll list? Thanks again, I guess I will try and get a bit further with the installs I have... Bill Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain. Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident /newIncident.aspx]takes less than a minute* *ManageIQ User Guide available* [*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20 v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working (as expected)? The log snippet you provided is completly normal and the messages can safely be ignored. This is also unrelated to oVirt but rather CentOS (or the distro you are running) I suppose. Cheers! On 11.09.2014 10:51, Bill Dossett wrote: Hi, I seem
Re: [ovirt-users] Fwd: RE: FC QLogic question
On 11.09.2014 14:23, Fabian Deutsch wrote: Hey Daniel, - Original Message - On 11.09.2014 14:09, Fabian Deutsch wrote: Hey Bill and Daniel, it would indeed be interesting - mandatory - to know if it's qla* or qxl (qxl is IMHO related to graphics). Once we know that I'll see if the bug below fixes it. Hello Fabian, indeed this was my mistake; while typing the mail I was reading on the spice website - so qla is the correct module of course! I already replied this to Bill but forgot to cc the list also ... Also, for the node iso it would make little sense to have the qlx module loaded. For completeness, I attach my answer to Bill. Thanks :) So to summarize: The adapter is recognized on Node? But it does not show up in Engine? Bill has to tell, but I think so. I suggested to him this might be because of dm-multipath, multipath.conf might blacklist here. My nodes are plain EL6 and I have multipath enabled - but I do not know if ovirt-node filters for dm-mp devnodes only by default (this would make sense because of iscsi-multipathing in ovirt 3.4). Maybe you can help out on this topic? Thanks! Thanks - fabian I'd need your help to verify that we are also including all relevant dependencies. Thanks - fabian - Original Message - On 11.09.2014 13:05, Bill Dossett wrote: Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one Indeed, sorry for that. lsscsi does list all of the LUNs... so that's working! Great! But nothing in ovirt engine when I try to add a storage domain. Please check back in ovirt engine, with Hosts / Hardware info. You should see the adapter there, along with WWN's ect. I am not quite sure, but AFAIK the node uses dm-multipath by default (for iscsi multipathing). So what does: # multipath -ll list? Thanks again, I guess I will try and get a bit further with the installs I have... Bill Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain. Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident /newIncident.aspx]takes less than a minute* *ManageIQ User Guide available* [*HERE https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20 v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and information [HERE] http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx* On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote: Hello Bill, what are your problems acually? Is fibre channel not working
Re: [ovirt-users] Fwd: RE: FC QLogic question
- Original Message - On 11.09.2014 14:23, Fabian Deutsch wrote: Hey Daniel, - Original Message - On 11.09.2014 14:09, Fabian Deutsch wrote: Hey Bill and Daniel, it would indeed be interesting - mandatory - to know if it's qla* or qxl (qxl is IMHO related to graphics). Once we know that I'll see if the bug below fixes it. Hello Fabian, indeed this was my mistake; while typing the mail I was reading on the spice website - so qla is the correct module of course! I already replied this to Bill but forgot to cc the list also ... Also, for the node iso it would make little sense to have the qlx module loaded. For completeness, I attach my answer to Bill. Thanks :) So to summarize: The adapter is recognized on Node? But it does not show up in Engine? Bill has to tell, but I think so. I suggested to him this might be Ah, I mixed you an Bill up in the thread. because of dm-multipath, multipath.conf might blacklist here. My nodes are plain EL6 and I have multipath enabled - but I do not know if ovirt-node filters for dm-mp devnodes only by default (this would make sense because of iscsi-multipathing in ovirt 3.4). Well, we did some multipath changes lately. Let#s see what Bill says: Bill, what node are you using? What does multipath -l say? How does /dev/mapper/* and /dev/multipath.conf look like? And is the disk appearing on Node and/or Engine? Thanks! fabian Maybe you can help out on this topic? Thanks! Thanks - fabian I'd need your help to verify that we are also including all relevant dependencies. Thanks - fabian - Original Message - On 11.09.2014 13:05, Bill Dossett wrote: Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one Indeed, sorry for that. lsscsi does list all of the LUNs... so that's working! Great! But nothing in ovirt engine when I try to add a storage domain. Please check back in ovirt engine, with Hosts / Hardware info. You should see the adapter there, along with WWN's ect. I am not quite sure, but AFAIK the node uses dm-multipath by default (for iscsi multipathing). So what does: # multipath -ll list? Thanks again, I guess I will try and get a bit further with the installs I have... Bill Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain. Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy Anywhere [HERE http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident /newIncident.aspx]takes less
Re: [ovirt-users] Passing custom script to cloud init using api
On 09/11/2014 12:51 PM, Shanil S wrote: Hi Juan, Also, i tried the following custom script from the ovirt panel and its working #cloud-config write_files: -content: | # THIS IS MY TEXT FILE Some Content for my file path: /tmp/myfile permissions: '0644' but the same content script i tried from the ovir api call like custom_script#cloud-config write_files: -content: | # THIS IS MY TEXT FILE Some Content for my file path: /tmp/myfile permissions: '0644' /custom_script /initialization But its not working, may be this is a bug in the ovirt api function call ? Currently the custom_script element doesn't work in combination with cloud-init. To make it work you will have to use the files element: action vm initialization cloud_init ... files file namethis is ignored/name content![CDATA[your script]]/content typeplaintext/type /file /files /cloud_init /initialization /vm /action As I wrote before there is a bug related to this: https://bugzilla.redhat.com/1138564 If that bug is fixed (unlikely according to the last comments) then the custom_script element will start working, but for know I suggest you include your custom script in both places: action vm initialization cloud_init ... files file namethis is ignored/name content![CDATA[your script]]/content typeplaintext/type /file /files /cloud_init custom_script![CDATA[your script]]/custom_script /initialization /vm /action -- Regards Shanil On Thu, Sep 11, 2014 at 3:36 PM, Shanil S xielessha...@gmail.com mailto:xielessha...@gmail.com wrote: Hi Juan, Okay sure.. The following xml i used action vm os boot dev='cdrom'/ /os initialization cloud_init host addresstest2/address /host users user user_nameroot/user_name passwordtest/password /user /users network_configuration nics nic interfacevirtio/interface nameeth0/name boot_protocolnone/boot_protocol on_boottrue/on_boot /nic /nics dns servers host addressx.x.x.x/address /host /servers /dns /network_configuration /cloud_init custom_script #cloud-config phone_home: url: http://x.x.com/api/xx/api_receive.php /custom_script /initialization /vm /action -- Regards Shanil On Thu, Sep 11, 2014 at 1:48 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 09/11/2014 06:54 AM, Shanil S wrote: Hi Juan, It seems the it doesn't contains the phone_home section in the cat /mnt/openstack/latest/user_data the following is the output #cloud-config ssh_pwauth: true disable_root: 0 output: all: ' /var/log/cloud-init-output.log' user: root password: admin123 chpasswd: expire: false runcmd: - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo ''datasource_list: [NoCloud, ConfigDrive]'' /etc/cloud/cloud.cfg' but if i try with the files file nameignored/name content![CDATA[runcmd: - echo 'Test script !' /iwashere_test.txt ]]/content typeplaintext/type /file /files then it will create the /iwashere_test.txt and write the contents and in that time the cat /mnt/openstack/latest/user_data is cat /mnt/openstack/latest/user_data #cloud-config ssh_pwauth: true disable_root: 0 output: all: ' /var/log/cloud-init-output.log' user: root password: admin123 chpasswd: expire: false runcmd: - 'sed -i ''/^datasource_list: /d'' /etc/cloud/cloud.cfg; echo ''datasource_list: [NoCloud, ConfigDrive]'' /etc/cloud/cloud.cfg' runcmd: - echo 'Test script !' /iwashere_test.txt so, i think the custom script section is
Re: [ovirt-users] Engine Hardware Crash
No back up, just the hard drive. The data is fine its the server board that is fried. I will eventually get a replacement server that I can use. So this brings me back to my original question below: How do I, or can I use vdsm to interact with the VMs that are still present on those hosts without the engine? - Original Message - From: Itamar Heim ih...@redhat.com To: Maurice James mja...@media-node.com, Yair Zaslavsky yzasl...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, September 10, 2014 5:20:47 PM Subject: Re: [ovirt-users] Engine Hardware Crash On 09/10/2014 06:45 PM, Maurice James wrote: Yes the db and engine are offline do you have a backup of the db to restore the engine? - Original Message - From: Yair Zaslavsky yzasl...@redhat.com To: Maurice James mja...@media-node.com Cc: users users@ovirt.org, Maor Lipchuk mlipc...@redhat.com, Allon Mureinik amure...@redhat.com Sent: Wednesday, September 10, 2014 9:34:41 AM Subject: Re: [ovirt-users] Engine Hardware Crash Just to make sure, this means that when it comes to file system , etc.. you also have your storage resources available, right? You lost the engine with the db, am I correct ? I'm CCing someone that might have the exact answer for that. - Original Message - From: Maurice James mja...@media-node.com To: users users@ovirt.org Sent: Wednesday, September 10, 2014 3:46:35 PM Subject: [ovirt-users] Engine Hardware Crash I just recently had the hardware that acts as the engine crash. I have a blinking amber light on the server. I have servers on the remaining hosts. How do I, or can I use vdsm to interact with the VMs that are still present on those hosts without the engine? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] qemu-kvm-rhev on EL machines for oVirt 3.4.z ?
On 11/09/14 14:02, Dan Kenigsberg wrote: The purpose of this thread is to solicit objections to apossibly-distruptive change in a stable branch, not to disparage non-conventional deployments. well you already did disparage non-conventional deployments in the past e.g. users using json over rest api in 3.3.z need to adjust stuff because during 3.4.z cycle it was communicated that the 3.3.z json api was not officially released at the time and therefore was altered in 3.4. (somehow it was forgotten to announce this during the 3.3. cycle..) If no one raises a serious objection, we can require qemu-kvm-rhev right after ovirt-3.4.4 is out. so this is really strange: for some stuff, you support or want to support deployments which where never supported (the install guides are quite verbose about how to install, and they all use the ovirt repos, none uses local install) and on the other hand, you break compatibility with a previous release when it was never documented that this feature was _not_ officially released. Again: How many deployments do you think would suffer from a new qemu package shipped by ovirt repo? This was also altered in the past, e.g. with epel, gluster and jpackage repo added during the releases. Furthermore there are regression bugs which sat there for a while until the release was not supported anymore, fortunately this bug was not found in the next release, so no one fixed it, e.g.: https://bugzilla.redhat.com/show_bug.cgi?id=1120267 To make this clear: I don't need qemu-kvm-rhev myself I just think the project needs to make a clear guideline what gets changed at what point in the release process and then follow this rules _always_ . I still have evidence (see above) that this is not always the case. So I hope you will strive for a more consistent release process (I know you do). The last document from Sandro regarding the new release process looks promising. I appreciate you took this topic to the mailing list and I hope my opinion doesn't sound to harsh. If there are errors above, please feel free to correct me. :) -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [ANN] oVirt 3.5.0 Second Release Candidate is now available for testing
The oVirt team is pleased to announce that the 3.5.0 Second Release Candidate is now available for testing as of Sep 11th 2014. The release candidate is available now for Fedora 19, Fedora 20 and Red Hat Enterprise Linux 6.5 (or similar) and allow you to use Red Hat Enterprise Linux 7 as node and run Hosted Engine. Feel free to join us testing it on Tue 2014-09-16 third test day! This release of oVirt includes numerous bug fixes. See the release notes [1] for a list of the new features and bugs fixed. The existing repository ovirt-3.5-pre has been updated for delivering this release without the need of enabling any other repository. If you're already using oVirt 3.5 repository, please update ovirt-release35 rpm. Please refer to release notes [1] for Installation / Upgrade instructions. New oVirt Live, oVirt Guest Tools and oVirt Node ISO will be available soon as well[2]. Please note that mirrors may need usually one day before being synchronized. If you want to be sure to use latest rpms and don't want to wait for the mirrors, you can edit /etc/yum.repos.d/ovirt-3.5.repo commenting the mirror line and removing the comment on baseurl line. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.5_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fwd: RE: FC QLogic question
Hi Sven! Thanks for the heads up on the BZ. One question remains; if the firmware is missing in oVirt node then how come Bill does the module loaded and all the LUNs with lsscsi? Cheers, -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Am 11.09.2014 um 17:29 schrieb Sven Kieske s.kie...@mittwald.de: Sorry for top posting, but this thread goes way too long: please take a look at this BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1063001 I think this is your issue! I already posted to the original thread but somehow nobody seems to read my mail. On 11/09/14 14:34, Daniel Helgenberger wrote: On 11.09.2014 14:23, Fabian Deutsch wrote: Hey Daniel, - Original Message - On 11.09.2014 14:09, Fabian Deutsch wrote: Hey Bill and Daniel, it would indeed be interesting - mandatory - to know if it's qla* or qxl (qxl is IMHO related to graphics). Once we know that I'll see if the bug below fixes it. Hello Fabian, indeed this was my mistake; while typing the mail I was reading on the spice website - so qla is the correct module of course! I already replied this to Bill but forgot to cc the list also ... Also, for the node iso it would make little sense to have the qlx module loaded. For completeness, I attach my answer to Bill. Thanks :) So to summarize: The adapter is recognized on Node? But it does not show up in Engine? Bill has to tell, but I think so. I suggested to him this might be because of dm-multipath, multipath.conf might blacklist here. My nodes are plain EL6 and I have multipath enabled - but I do not know if ovirt-node filters for dm-mp devnodes only by default (this would make sense because of iscsi-multipathing in ovirt 3.4). Maybe you can help out on this topic? Thanks! Thanks - fabian I'd need your help to verify that we are also including all relevant dependencies. Thanks - fabian - Original Message - On 11.09.2014 13:05, Bill Dossett wrote: Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one Indeed, sorry for that. lsscsi does list all of the LUNs... so that's working! Great! But nothing in ovirt engine when I try to add a storage domain. Please check back in ovirt engine, with Hosts / Hardware info. You should see the adapter there, along with WWN's ect. I am not quite sure, but AFAIK the node uses dm-multipath by default (for iscsi multipathing). So what does: # multipath -ll list? Thanks again, I guess I will try and get a bit further with the installs I have... Bill Hi Daniel, I did a lsmod | grep qxl and it returned nothing... did you perhaps mean qla? [root@ovirt141 ~]# lsmod | grep qla qla2xxx 466573 56 I think that is the one lsscsi does list all of the LUNs... so that's working! But nothing in ovirt engine when I try to add a storage domain. Thanks again, I guess I will try and get a bit further with the installs I have... Bill -Original Message- From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de] Sent: 11 September 2014 11:53 To: Bill Dossett Subject: Re: [ovirt-users] FC QLogic question On 11.09.2014 12:17, Bill Dossett wrote: Thanks for responding Daniel. Never mind! I was wondering and thought the message may be irrelevant. But yes, it doesn't appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something...) on two hosts now and neither are working. Lets first try to isolate your FC issure. So you are using the latest ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore should support Qlogic adapters out of the box (IMHO they are the best supported HBAs in Linux). Please try a: # lsmod | grep qxl to see whatever the qxl module is loaded. Keep in mind you can run into problems with other conrollers in your host, though I only had this with LSI SAS / FC controllers so far. Further check on the FC switch if the N port is logged in and the zoning is correct. Finally, check with # lsscsi if you can see the luns. Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured... on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes - Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923
Re: [ovirt-users] Fwd: RE: FC QLogic question
I really don't know, maybe it got silently fixed and the BZ was not updated. Just another reason _not_ to use node (sorry fabian) imho. On 11/09/14 18:16, Daniel Helgenberger wrote: Hi Sven! Thanks for the heads up on the BZ. One question remains; if the firmware is missing in oVirt node then how come Bill does the module loaded and all the LUNs with lsscsi? Cheers, -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-announce] [ANN] oVirt 3.5.0 Second Release Candidate is now available for testing
Well done! Original message From: Sandro Bonazzola sbona...@redhat.com Date:11/09/2014 18:55 (GMT+02:00) To: annou...@ovirt.org,de...@ovirt.org,Users@ovirt.org Subject: [ovirt-announce] [ANN] oVirt 3.5.0 Second Release Candidate is now available for testing The oVirt team is pleased to announce that the 3.5.0 Second Release Candidate is now available for testing as of Sep 11th 2014. The release candidate is available now for Fedora 19, Fedora 20 and Red Hat Enterprise Linux 6.5 (or similar) and allow you to use Red Hat Enterprise Linux 7 as node and run Hosted Engine. Feel free to join us testing it on Tue 2014-09-16 third test day! This release of oVirt includes numerous bug fixes. See the release notes [1] for a list of the new features and bugs fixed. The existing repository ovirt-3.5-pre has been updated for delivering this release without the need of enabling any other repository. If you're already using oVirt 3.5 repository, please update ovirt-release35 rpm. Please refer to release notes [1] for Installation / Upgrade instructions. New oVirt Live, oVirt Guest Tools and oVirt Node ISO will be available soon as well[2]. Please note that mirrors may need usually one day before being synchronized. If you want to be sure to use latest rpms and don't want to wait for the mirrors, you can edit /etc/yum.repos.d/ovirt-3.5.repo commenting the mirror line and removing the comment on baseurl line. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.5_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Announce mailing list annou...@ovirt.org http://lists.ovirt.org/mailman/listinfo/announce ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] cloud-init issues on fedora ovirt
I am running ovirt 3.4.3 on a Fedora 19 manager and have 1 node running Fedora 19 as well. I am attempting to get cloud-init to work on a CentOS VM but I am running into issues. I can see where in the log it mounts /dev/sr1 to /tmp/tmp_random_location and where it reads the meta-data.json and user_data from that location but after it unmounts it moves on to /var/lib/cloud/data/instance-id and returns No instance datasource found! Likely bad things to come! Has anyone seen this before? Am I missing something? -- Patrick Pierson ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Fwd: RE: FC QLogic question
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 11.09.2014 19:20, Douglas Schilling Landgraf wrote: I do believe we are improving all components of oVirt release after release, including oVirt Node. Discouraging people to use it (or any other component) won't help the project. We are here to listen the feedback from users to improve the software and sometimes adding new features based in their requests and suggestions. I know you are a very active contributor in this project and thanks for that, if you still have issues in the node please keep the bugzillas coming. Sorry for getting Off-Topic: Well yeah, I see lots of improvement, also in the node project. But when people ask about what do you recommend for production I really can't call for node (yet). Most deployments tend to need customization specific to the site where the deployment takes place and in the past it was very hard to alter node for your personal needs (that's also not the projects main goal imho). I don't want to discourage anyone from testing node, but I won't recommend it for production, as I wouldn't recommend fedora (and breakage has happened for people using fedora, just search this mailing list). I really appreciate all the work that is done and I see many improvements, but when it comes to giving advice, some developers are a little naive, I can even make a list: someone has a problem in production: yeah this is fixed in $BETA (or $ALPHA), just try it out (without even mentioning that it's a beta release!) you could easily backport the fix yourself, it's just a one liner you need to alter config param $X (not mentioning this param gets overwritten on upgrades) and so on. I know these are all just good intentions, but I think some people seem to think those people asking are all just running test environments, which is plainly wrong, or I don't know what they think, maybe that it's already robust enough. the project has matured so much, you should keep in mind people might use it to run their business/store sensitive data/host very critical machines on top of ovirt. this is great, but this also comes with some kind of responsibility on the side of a developer. At least that's my opinion when I develop stuff (not such huge projects ;) ) I know there are labels on every open source project and in all software licenses like use at your own risk. But there is some moral responsibility for stuff you do you can't talk away with some legal paper saying your not responsible for what you do (code) or advice you give. Maybe you should just ask yourself sometimes: would I do myself what I just advocated if I have really sensible data in my environment? Anyway, keep up the good work! I know it's all good intentions and of course every developer wants his new features getting used. :) Thanks Sven -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.22 (MingW32) iQGcBAEBAgAGBQJUEiDjAAoJEAq0kGAWDrqlNzsL/1EWhurbdEgt1jhBb/stoNhH KnOANZyYCYUoUttGxG3h3KxM0wRA1mfpSO+yOtVYd/bfclu0M6dy5oRpRw4Q3m2U VGVKqyDKsuQSaYX9CGOY90sYyO8DCt+KV04IN/XntsSpudF5Y+V7EqgBAaGqSS3N ETNL9Jru91pdnJ+ThXtdEsp05DXg7pYYKTRFJ3mCEQOsD2AkcUlz91tQ2h7tC6ZF KPjdRLK2iwQR/ssKduPdirlJ/jxW1K2JaBWUJx9OLLFLpm7D6Ea87beIQwGqX27S jSk1lDm3MGJbK2cuKxZ8rDUnoJFa0DFkUi1pxp6l9IheOirXrvHcW57WkdUkZTb8 7fAeDMpFG3fny0+duAANneMI05NtA9hPl1Vnn6QBnp+nb7GET5JhcEpdgPe17h+W hCBdgfN1OveLscN8E8hGrV9YKKUxkJkFAcXhgxOrTW23z6rwwYDG46t630xTSgIp g401Zs7wyHZVb2FEZRZCuSBK07vcJI/b1nnG7OpS8A== =A8rd -END PGP SIGNATURE- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Engine Hardware Crash
On 09/11/2014 08:50 AM, Maurice James wrote: No back up, just the hard drive. The data is fine its the server board that is fried. I will eventually get a replacement server that I can use. So this brings me back to my original question below: How do I, or can I use vdsm to interact with the VMs that are still present on those hosts without the engine? Hi Maurice, What's the oVirt environment that you were running? 3.3, 3.4, 3.5? When you say interact, is it about to start the VM that are you asking? Could you please clarify? Have you tried the Maor's suggestion? For now, I would say to start with: http://wiki.ovirt.org/VdsClient Thanks Douglas - Original Message - From: Itamar Heim ih...@redhat.com To: Maurice James mja...@media-node.com, Yair Zaslavsky yzasl...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, September 10, 2014 5:20:47 PM Subject: Re: [ovirt-users] Engine Hardware Crash On 09/10/2014 06:45 PM, Maurice James wrote: Yes the db and engine are offline do you have a backup of the db to restore the engine? - Original Message - From: Yair Zaslavsky yzasl...@redhat.com To: Maurice James mja...@media-node.com Cc: users users@ovirt.org, Maor Lipchuk mlipc...@redhat.com, Allon Mureinik amure...@redhat.com Sent: Wednesday, September 10, 2014 9:34:41 AM Subject: Re: [ovirt-users] Engine Hardware Crash Just to make sure, this means that when it comes to file system , etc.. you also have your storage resources available, right? You lost the engine with the db, am I correct ? I'm CCing someone that might have the exact answer for that. - Original Message - From: Maurice James mja...@media-node.com To: users users@ovirt.org Sent: Wednesday, September 10, 2014 3:46:35 PM Subject: [ovirt-users] Engine Hardware Crash I just recently had the hardware that acts as the engine crash. I have a blinking amber light on the server. I have servers on the remaining hosts. How do I, or can I use vdsm to interact with the VMs that are still present on those hosts without the engine? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Cheers Douglas ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Passing custom script to cloud init using api
Hi Juan, I tried the following action vm initialization cloud_init ... files file nameignored/name content![CDATA[write_files: -content: | Some Content for my file path: /tmp/myfile permissions: '0644']]/content typeplaintext/type /file /files /cloud_init custom_script![CDATA[ write_files: -content: | Some Content for my file path: /tmp/myfile permissions: '0644']]/custom_script But in that time i go the following errors from the api Request syntactically incorrect. See the link description below for the correct usage:start a virtual machine in the system identified by the given idPOST Content-Typeapplication/xml|json If i change the xml format like action vm initialization cloud_init ... files file nameignored/name content![CDATA[write_files: -content: | Some Content for my file path: /tmp/myfile permissions: '0644']]/content typeplaintext/type /file /files /cloud_init custom_script write_files: -content: | Some Content for my file path: /tmp/myfile permissions: '0644'/custom_script the cloud init part won't work even though we didn't get any errors from the api. Could you please check it ? -- Regards Shanil On Thu, Sep 11, 2014 at 6:16 PM, Juan Hernandez jhern...@redhat.com wrote: On 09/11/2014 12:51 PM, Shanil S wrote: Hi Juan, Also, i tried the following custom script from the ovirt panel and its working #cloud-config write_files: -content: | # THIS IS MY TEXT FILE Some Content for my file path: /tmp/myfile permissions: '0644' but the same content script i tried from the ovir api call like custom_script#cloud-config write_files: -content: | # THIS IS MY TEXT FILE Some Content for my file path: /tmp/myfile permissions: '0644' /custom_script /initialization But its not working, may be this is a bug in the ovirt api function call ? Currently the custom_script element doesn't work in combination with cloud-init. To make it work you will have to use the files element: action vm initialization cloud_init ... files file namethis is ignored/name content![CDATA[your script]]/content typeplaintext/type /file /files /cloud_init /initialization /vm /action As I wrote before there is a bug related to this: https://bugzilla.redhat.com/1138564 If that bug is fixed (unlikely according to the last comments) then the custom_script element will start working, but for know I suggest you include your custom script in both places: action vm initialization cloud_init ... files file namethis is ignored/name content![CDATA[your script]]/content typeplaintext/type /file /files /cloud_init custom_script![CDATA[your script]]/custom_script /initialization /vm /action -- Regards Shanil On Thu, Sep 11, 2014 at 3:36 PM, Shanil S xielessha...@gmail.com mailto:xielessha...@gmail.com wrote: Hi Juan, Okay sure.. The following xml i used action vm os boot dev='cdrom'/ /os initialization cloud_init host addresstest2/address /host users user user_nameroot/user_name passwordtest/password /user /users network_configuration nics nic interfacevirtio/interface nameeth0/name boot_protocolnone/boot_protocol on_boottrue/on_boot /nic /nics dns servers host addressx.x.x.x/address /host /servers /dns /network_configuration /cloud_init custom_script #cloud-config phone_home: url: http://x.x.com/api/xx/api_receive.php /custom_script /initialization /vm /action -- Regards Shanil On Thu, Sep 11, 2014 at 1:48 PM, Juan Hernandez jhern...@redhat.com mailto:jhern...@redhat.com wrote: On 09/11/2014 06:54 AM, Shanil S wrote: Hi Juan, It seems the it doesn't contains the phone_home section in the cat /mnt/openstack/latest/user_data the following is
