Re: [ovirt-users] ovirt w/ gluster replace-brick
On 06/29/2015 06:50 PM, Frank Rothenstein wrote: Hi, I just added a gluster-node. I wanted to replace one brick of the data domain. I did with gluster vol replace-brick old_brick new_brick commit force and all gluster processes did well. My Cluster volumes now shows this one old_brick down and does not show the new_brick, where as gluster vol status is fine. The engine should have detected that the brick was replaced and update in the UI. If not, this is a bug. Could you provide engine log, and output of gluster volume info Is there any service I forgot to restart? Frank __ BODDEN-KLINIKEN Ribnitz-Damgarten GmbH Sandhufe 2 18311 Ribnitz-Damgarten Telefon: 03821-700-0 Fax: 03821-700-240 E-Mail: i...@bodden-kliniken.de Internet: http://www.bodden-kliniken.de Sitz: Ribnitz-Damgarten, Amtsgericht: Stralsund, HRB 2919, Steuer-Nr.: 081/126/00028 Aufsichtsratsvorsitzende: Carmen Schröter, Geschäftsführer: Dr. Falko Milski Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorge- sehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, beachten Sie bitte, dass jede Form der Veröf- fentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail unzulässig ist. Wir bitten Sie, sofort den Absender zu informieren und die E-Mail zu löschen. Bodden-Kliniken Ribnitz-Damgarten GmbH 2014 *** Virenfrei durch Kerio Mail Server und Sophos Antivirus *** ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
Are you configuring the vms interface with the vlan or tagging at the host. On Jun 30, 2015 7:28 PM, Julián Tete danteconra...@gmail.com wrote: Hi Donny We have HP Switches (HP 5406zl) and they are configurated on trunk mode. (VMware is configurated to use that). Any suggestion ? Thanks for your response. :) 2015-06-30 17:51 GMT-05:00 Donny Davis do...@cloudspin.me: Vlans are layer 2, sounds like a tagging problem. Cisco switches? The tag sticks to the host bridge, but is being stripped off when it leaves the host Is your switch in access mode or trunk? Hi Friends of oVirt I'm trying to migrate my company from VMware to oVirt. In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) The Virtual Machines in these VLANs, can be reached from the external IPs from the net range, but from the Virtual machines only can ping the Host with the Bridge and itself, can't reach the gateway. ¿? I configured a IP Forwarding in the Host with the virtual machine, and nothing changes... Any idea ? This is the last duty before embrace oVirt in the company. Look to the VLAN 100 configuration (My desired VM Network): http://postimg.org/image/7hrog0a2n/ http://postimg.org/image/68b40i1vr/ http://postimg.org/image/lu6mlshgp/ http://postimg.org/image/540o1qc0t/ http://postimg.org/image/4kyg787bt/ http://postimg.org/image/v7ralh7zb/ http://postimg.org/image/kn903cl03/ For any idea, thanks in advance ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
Does your switch have an IP on that vlan... I would step things out VMhostswitchrtr You have already confirmed VM to host. I'm going to look at your screens again to make sure I didn't miss anything On Jun 30, 2015 9:42 PM, Julián Tete danteconra...@gmail.com wrote: Thanks for the explanation :) I set everything of the VLANs at oVirt, After I put a IP on the Virtual Machine. But the Virtual Machine can't reach the gateway, The host can do. The Virtual Machine only can reach the host. All the machines of the range of net can reach the Virtual Machine. 2015-06-30 20:36 GMT-05:00 Donny Davis do...@cloudspin.me: I'm asking if your setting the vlan on the VM or at ovirt. More than likely if you are coming from VMware you have the Vlans set at the hypervisor. This does work in ovirt, I am doing it right now On Jun 30, 2015 9:31 PM, Julián Tete danteconra...@gmail.com wrote: Mmmm I'm new in oVirt :( VMs Interface is Virtual MachineS Interface or VM Network Interface in the host ? I configured the IP of the VLAN in the host. I double check: the NIC of the Host has the VLAN assigned. Can you help me ? 2015-06-30 20:11 GMT-05:00 Donny Davis do...@cloudspin.me: Are you configuring the vms interface with the vlan or tagging at the host. On Jun 30, 2015 7:28 PM, Julián Tete danteconra...@gmail.com wrote: Hi Donny We have HP Switches (HP 5406zl) and they are configurated on trunk mode. (VMware is configurated to use that). Any suggestion ? Thanks for your response. :) 2015-06-30 17:51 GMT-05:00 Donny Davis do...@cloudspin.me: Vlans are layer 2, sounds like a tagging problem. Cisco switches? The tag sticks to the host bridge, but is being stripped off when it leaves the host Is your switch in access mode or trunk? Hi Friends of oVirt I'm trying to migrate my company from VMware to oVirt. In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) The Virtual Machines in these VLANs, can be reached from the external IPs from the net range, but from the Virtual machines only can ping the Host with the Bridge and itself, can't reach the gateway. ¿? I configured a IP Forwarding in the Host with the virtual machine, and nothing changes... Any idea ? This is the last duty before embrace oVirt in the company. Look to the VLAN 100 configuration (My desired VM Network): http://postimg.org/image/7hrog0a2n/ http://postimg.org/image/68b40i1vr/ http://postimg.org/image/lu6mlshgp/ http://postimg.org/image/540o1qc0t/ http://postimg.org/image/4kyg787bt/ http://postimg.org/image/v7ralh7zb/ http://postimg.org/image/kn903cl03/ For any idea, thanks in advance ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] how can i setup hosted engine on the ovirt-node-3.5-201504280933
hi fabian: I got some error message below.How can i fix this? [root@ovirthost1 Stor01]# hosted-engine --deploy [ INFO ] Stage: Initializing [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20150701023616-yoz2k9.log Version: otopi-1.3.1 (otopi-1.3.1-1.el6) [ INFO ] Hardware supports virtualization [ INFO ] Bridge ovirtmgmt already created [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- During customization use CTRL-D to abort. Please specify the storage you would like to use (iscsi, nfs3, nfs4)[nfs3]: Please specify the full shared storage connection path to use (example: host:/path): 10.10.19.99:/volume1/nfsstor The specified storage location already contains a data domain. Is this an additional host setup (Yes, No)[Yes]? no [ INFO ] Installing on first host Local storage datacenter name is an internal name and currently will not be shown in engine's admin UI. Please enter local datacenter name [hosted_datacenter]: --== SYSTEM CONFIGURATION ==-- --== NETWORK CONFIGURATION ==-- iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]: no Please indicate a pingable gateway IP address [10.10.19.254]: --== VM CONFIGURATION ==-- Please specify the device to boot the VM from (cdrom, disk, pxe) [cdrom]: disk Please specify path to OVF archive you would like to use [None]: /data/Stor01/ISOs/oVirt-Engine-Appliance-CentOS-x86_64-7-20150628.74.ova [ INFO ] Checking OVF archive content (could take a few minutes depending on archive size) [ INFO ] Checking OVF XML content (could take a few minutes depending on archive size) [WARNING] OVF does not contain a valid image description, using default. [ ERROR ] Not enough space in the temporary directory Please specify path to a temporary directory with at least 10 GB [/tmp]: /data/Stor01/tmp Please specify an alias for the Hosted Engine image [hosted_engine]: The following CPU types are supported by this host: - model_Nehalem: Intel Nehalem Family - model_Penryn: Intel Penryn Family - model_Conroe: Intel Conroe Family Please specify the CPU type to be used by the VM [model_Nehalem]: [WARNING] Minimum requirements for disk size not met You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:59:cd:e9]: Please specify the console type you would like to use to connect to the VM (vnc, spice) [vnc]: --== HOSTED ENGINE CONFIGURATION ==-- Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_1]: Enter 'admin@internal' user password that will be used for accessing the Administrator Portal: Confirm 'admin@internal' user password: Please provide the FQDN for the engine you would like to use. This needs to match the FQDN that you will use for the engine installation within the VM. Note: This will be the FQDN of the VM you are now going to create, it should not point to the base host or to any other existing machine. Engine FQDN: ovirtmgmt.ctcnet.com [WARNING] Failed to resolve ovirtmgmt.ctcnet.com using DNS, it can be resolved only locally Please provide the name of the SMTP server through which we will send notifications [localhost]: Please provide the TCP port number of the SMTP server [25]: Please provide the email address from which notifications will be sent [root@localhost]: Please provide a comma-separated list of email addresses which will get notifications [root@localhost]: [ INFO ] Stage: Setup validation [WARNING] Cannot validate host name settings, reason: resolved host does not match any of the local addresses [WARNING] Failed to resolve ovirthost1.ctcnet.com using DNS, it can be resolved only locally --== CONFIGURATION PREVIEW ==-- Engine FQDN: ovirtmgmt.ctcnet.com Bridge name: ovirtmgmt SSH daemon port: 22 Gateway address: 10.10.19.254 Host name for web application : hosted_engine_1 Host ID: 1 Image alias: hosted_engine Image
[ovirt-users] Hosted engine reboots every hour
Dear Experts,
I am experiencing a problem with ovirt, every hour the hosted engine will
shutdown and reboot. The engine-status value will move to unknown stale-data
every second minute, and then the hosted engine will be again operative 14
minutes after that. As far as I can see the scores remain in 2400 at all times,
and seems I have a liveliness check failing, but I am not able to find why.
Why I have this problem every hour exactly?
Why the liveliness check fails?
I would appreciate if someone can bring some light, I am new to ovirt but I
really like it so far.
During the period the machine is down I can see this messages on the
/var/log/ovirt-hosted-engine-ha/broker.log :
Thread-170803::INFO::2015-07-01
11:06:47,335::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup)
Connection established
Thread-170803::INFO::2015-07-01
11:06:47,342::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle)
Connection closed
Thread-170804::INFO::2015-07-01
11:06:47,343::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup)
Connection established
Thread-170804::INFO::2015-07-01
11:06:47,344::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle)
Connection closed
Thread-170805::INFO::2015-07-01
11:06:47,344::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup)
Connection established
Thread-170805::INFO::2015-07-01
11:06:47,346::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle)
Connection closed
Thread-170806::INFO::2015-07-01
11:06:47,346::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup)
Connection established
Thread-170806::INFO::2015-07-01
11:06:47,348::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle)
Connection closed
Thread-170807::INFO::2015-07-01
11:06:47,348::listener::134::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(setup)
Connection established
Thread-170807::INFO::2015-07-01
11:06:47,350::listener::186::ovirt_hosted_engine_ha.broker.listener.ConnectionHandler::(handle)
Connection closed
Thread-7::INFO::2015-07-01
11:06:50,394::cpu_load_no_engine::121::cpu_load_no_engine.EngineHealth::(calculate_load)
System load total=0.0095, engine=0.0046, non-engine=0.0049
Thread-8::WARNING::2015-07-01
11:06:50,464::engine_health::116::engine_health.CpuLoadNoEngine::(action) bad
health status: Hosted Engine is not up!
and here the /var/log/ovirt-hosted-engine-ha/agent.log :
MainThread::INFO::2015-07-01
11:01:04,216::hosted_engine::327::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Current state EngineUp (score: 2400)
MainThread::INFO::2015-07-01
11:01:04,217::hosted_engine::332::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Best remote host mc-place-compute-02-live.mc.mcon.net (id: 2, score: 240
0)
MainThread::INFO::2015-07-01
11:01:14,682::hosted_engine::327::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Current state EngineUp (score: 2400)
MainThread::INFO::2015-07-01
11:01:14,682::hosted_engine::332::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Best remote host mc-place-compute-02-live.mc.mcon.net (id: 2, score: 240
0)
MainThread::INFO::2015-07-01
11:01:24,724::states::393::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume)
Engine vm running on localhost
MainThread::INFO::2015-07-01
11:01:25,174::hosted_engine::327::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Current state EngineUp (score: 2400)
MainThread::INFO::2015-07-01
11:01:25,174::hosted_engine::332::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Best remote host mc-place-compute-02-live.mc.mcon.net (id: 2, score: 240
0)
MainThread::INFO::2015-07-01
11:01:35,234::brokerlink::111::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(notify)
Trying: notify time=1435719695.23 type=state_transition
detail=EngineUp-EngineUpBadHealth ho
stname='mc-place-compute-01-live.mc.mcon.net'
MainThread::INFO::2015-07-01
11:03:42,536::brokerlink::120::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(notify)
Success, was notification of state_transition (EngineUp-EngineUpBadHealth)
sent? ignored
MainThread::INFO::2015-07-01
11:03:43,018::hosted_engine::327::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Current state EngineUpBadHealth (score: 2400)
MainThread::INFO::2015-07-01
11:03:43,018::hosted_engine::332::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Best remote host mc-place-compute-02-live.mc.mcon.net (id: 2, score: 240
0)
MainThread::INFO::2015-07-01
11:03:53,060::state_machine::160::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(refresh)
Global metadata: {'maintenance': False}
Re: [ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
How is your mgmt network working... You have no vlan tag on it If your switch port is setup for trunk mode? I have a Cisco switch that when in trunk mode will not pass untagged traffic. The mgmt network and hosting network are on the same interface. One tagged one not I would try putting a machine on the mgmt network and see if traffic flows as it should. This is not outside ovirt capability set, we just have to narrow down where traffic is not flowing :) Up until about 3 months ago I used ovirt to host a public IaaS, included in my setup was several vlan tagged networks. The community is for help, welcome to open source. Donny D On Jun 30, 2015 9:46 PM, Donny Davis do...@cloudspin.me wrote: Does your switch have an IP on that vlan... I would step things out VMhostswitchrtr You have already confirmed VM to host. I'm going to look at your screens again to make sure I didn't miss anything On Jun 30, 2015 9:42 PM, Julián Tete danteconra...@gmail.com wrote: Thanks for the explanation :) I set everything of the VLANs at oVirt, After I put a IP on the Virtual Machine. But the Virtual Machine can't reach the gateway, The host can do. The Virtual Machine only can reach the host. All the machines of the range of net can reach the Virtual Machine. 2015-06-30 20:36 GMT-05:00 Donny Davis do...@cloudspin.me: I'm asking if your setting the vlan on the VM or at ovirt. More than likely if you are coming from VMware you have the Vlans set at the hypervisor. This does work in ovirt, I am doing it right now On Jun 30, 2015 9:31 PM, Julián Tete danteconra...@gmail.com wrote: Mmmm I'm new in oVirt :( VMs Interface is Virtual MachineS Interface or VM Network Interface in the host ? I configured the IP of the VLAN in the host. I double check: the NIC of the Host has the VLAN assigned. Can you help me ? 2015-06-30 20:11 GMT-05:00 Donny Davis do...@cloudspin.me: Are you configuring the vms interface with the vlan or tagging at the host. On Jun 30, 2015 7:28 PM, Julián Tete danteconra...@gmail.com wrote: Hi Donny We have HP Switches (HP 5406zl) and they are configurated on trunk mode. (VMware is configurated to use that). Any suggestion ? Thanks for your response. :) 2015-06-30 17:51 GMT-05:00 Donny Davis do...@cloudspin.me: Vlans are layer 2, sounds like a tagging problem. Cisco switches? The tag sticks to the host bridge, but is being stripped off when it leaves the host Is your switch in access mode or trunk? Hi Friends of oVirt I'm trying to migrate my company from VMware to oVirt. In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) The Virtual Machines in these VLANs, can be reached from the external IPs from the net range, but from the Virtual machines only can ping the Host with the Bridge and itself, can't reach the gateway. ¿? I configured a IP Forwarding in the Host with the virtual machine, and nothing changes... Any idea ? This is the last duty before embrace oVirt in the company. Look to the VLAN 100 configuration (My desired VM Network): http://postimg.org/image/7hrog0a2n/ http://postimg.org/image/68b40i1vr/ http://postimg.org/image/lu6mlshgp/ http://postimg.org/image/540o1qc0t/ http://postimg.org/image/4kyg787bt/ http://postimg.org/image/v7ralh7zb/ http://postimg.org/image/kn903cl03/ For any idea, thanks in advance ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-announce] [ANN] oVirt 3.6.0 Second Alpha Release is now available for testing
Il 30/06/2015 11:46, Sandro Bonazzola ha scritto: Hi, due to an issue in the repository creation tool some of the rpms supposed to be in ovirt-3.6.0-pre repository have not been published. We're currently fixing the issue. Sorry for the inconvenient. Issue has been fixed. Il 29/06/2015 11:39, Sandro Bonazzola ha scritto: The oVirt Project is pleased to announce the availability of the Second Alpha release of oVirt 3.6 for testing, as of June 29, 2015. oVirt is an open source alternative to VMware vSphere, and provides an excellent KVM management interface for multi-node virtualization. The Second Alpha release is available now for Fedora 20, Red Hat Enterprise Linux 6.6, CentOS 6.6 (or similar) and Red Hat Enterprise Linux 7.1, CentOS 7.1 (or similar). The Second Alpha release can also be deployed on Hypervisor Hosts running Fedora 21 and Fedora 22. Experimental support for Debian 8.1 Jessie has been added too. This Second Alpha release of oVirt includes numerous bug fixes. See the release notes [1] for an initial list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. A new oVirt Live ISO[2] and Node ISO[3] are already available. Please note that mirrors[4] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.6_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/ovirt-live/el7-alpha2/ovirt-live-el7-alpha2.iso [3] http://plain.resources.ovirt.org/pub/ovirt-3.6-pre/iso/ovirt-node/ovirt-node-iso-3.6-0.999.201506272015.el7.centos.iso [4] http://www.ovirt.org/Repository_mirrors#Current_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] IO Threads + 3.6 Second Alpha Release
Hi, This functions (IO Threads) is present in 3.6 Second Alpha Release oVirt version? http://www.ovirt.org/Features/IOThreads_Support Thanks, Drovalev Roman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] how can i setup hosted engine on the ovirt-node-3.5-201504280933
I 'm installing oVirt Node using a CD(ovirt-node-iso-3.5-0.999.201504280933.el6.iso),and Ovirt Node is worked. How can i setup hosted engine by using OVirt Node Console?or where can i get the Engine OVA? I can't find any description about this in the www.ovirt.org. The Console looks like this: Hosted Engine Setup Hosted Engine: Not configured Engine VM Name: Engine Status: Hosted engine not configured Engine ISO/OVA URL for download: _ PXE Boot Engine VM [ ] Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] all in one migration
Il 23/06/2015 16:09, Simone Tiraboschi ha scritto: export all the VMs from the all-in-one host 3. import them in the hosted-engine one When everything is in the new one and you are sure that it's working you could clean the first host to get rid of all the all-in-one stuff and redeploy it as an hosted-engine additional host. thank you for you replies and suggestions. For suggestions of didi on CNAME effectively I did not think about it, then I will apply. For the migration I try to explain me better. As in my previous mail, currently I have installed a server with ovirt engine 3.4.1 (all in one). The hostname is the same of the User Portal url and this is registered in dns server (oveng.local). Since I have an identical server to the 'all in one' server, I would like to migrare the entire structure to ovirt 3.5. For the new installation of ovirt-engine I thought to install it as a virtual machine on vmware vsphere. Obviously adding also storage. I explain better, I thought to create a new parallel infrastructure to the one that is currently installed, for migrate to a virtual macchine. I would like to use the current hostname for the user portal (oveng.local). Once the migration will be terminate I will re-install the old server (all in one) as a host of new structure. To do this I thought to: - change the hostname of the old server (aio) from oveng.local to ovengold.local. - add a CNAME to the dns (as suggested by didi) - install the new ovirt-engine on an our vmware vsphere structure with the CNAME modified - configure the networking - install the new server as a node and add it to the new new structure. - add storage - migrate the virtual macchines from old structure to the new structure. - do the test - if its work fine I shutdown the old server (aio) - re-install the old server (aio) as a node and add it to the new new structure. What do you think? Best regards ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] how can i setup hosted engine on the ovirt-node-3.5-201504280933
- Original Message - I 'm installing oVirt Node using a CD(ovirt-node-iso-3.5-0.999.201504280933.el6.iso),and Ovirt Node is worked. How can i setup hosted engine by using OVirt Node Console?or where can i get the Engine OVA? I can't find any description about this in the www.ovirt.org. Hey Zhong, the process is very similar to http://www.ovirt.org/Features/Self_Hosted_Engine except that you start it with the page you pasted below. The OVA which is intended for this page can be found here: http://jenkins.ovirt.org/job/ovirt-appliance-engine_3.5_merged/ Let us know if this works for you! - fabian The Console looks like this: Hosted Engine Setup Hosted Engine: Not configured Engine VM Name: Engine Status: Hosted engine not configured Engine ISO/OVA URL for download: _ PXE Boot Engine VM [ ] Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-devel] ovirt-engine-3.5.4 branch created
Il 30/06/2015 16:12, Michal Skrivanek ha scritto: On Jun 30, 2015, at 16:11 , Sandro Bonazzola sbona...@redhat.com wrote: Hi, just a quick note reminding that ovirt-engine 3.5.4 branch has been created today. Any further patch targeted 3.5.4 must be cherry-picked there too. great I'd be glad to see 3.6 as well some time soon! :-D though seriously - when do we plan to branch 3.6? beta time? yep, as per http://www.ovirt.org/Release_process ovirt-3.6 will be branched on beta build, targeted to 2015-07-15 as per http://www.ovirt.org/OVirt_3.6_Release_Management. Thanks, michal Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Devel mailing list de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] how can i setup hosted engine on the ovirt-node-3.5-201504280933
Hi Fabian: Thank you ,I will try it tomorrow. i found this page http://www.ovirt.org/Features/Boot; before,but the link http// jenkins.ovirt.org/job/ovirt-appliance_engine-3.5_master_merged/ was wrong。Maybe you can modify this link to http://jenkins.ovirt.org/job/ovirt-appliance-engine_3.5_merged/;. If there is anything wrong, please understand. Thanks again! -qiang 2015-06-30 22:03 GMT+08:00 Fabian Deutsch fdeut...@redhat.com: - Original Message - I 'm installing oVirt Node using a CD(ovirt-node-iso-3.5-0.999.201504280933.el6.iso),and Ovirt Node is worked. How can i setup hosted engine by using OVirt Node Console?or where can i get the Engine OVA? I can't find any description about this in the www.ovirt.org. Hey Zhong, the process is very similar to http://www.ovirt.org/Features/Self_Hosted_Engine except that you start it with the page you pasted below. The OVA which is intended for this page can be found here: http://jenkins.ovirt.org/job/ovirt-appliance-engine_3.5_merged/ Let us know if this works for you! - fabian The Console looks like this: Hosted Engine Setup Hosted Engine: Not configured Engine VM Name: Engine Status: Hosted engine not configured Engine ISO/OVA URL for download: _ PXE Boot Engine VM [ ] Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-devel] ovirt-engine-3.5.4 branch created
On Jun 30, 2015, at 16:11 , Sandro Bonazzola sbona...@redhat.com wrote: Hi, just a quick note reminding that ovirt-engine 3.5.4 branch has been created today. Any further patch targeted 3.5.4 must be cherry-picked there too. great I'd be glad to see 3.6 as well some time soon! :-D though seriously - when do we plan to branch 3.6? beta time? Thanks, michal Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Devel mailing list de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
Hi Friends of oVirt I'm trying to migrate my company from VMware to oVirt. In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) The Virtual Machines in these VLANs, can be reached from the external IPs from the net range, but from the Virtual machines only can ping the Host with the Bridge and itself, can't reach the gateway. ¿? I configured a IP Forwarding in the Host with the virtual machine, and nothing changes... Any idea ? This is the last duty before embrace oVirt in the company. Look to the VLAN 100 configuration (My desired VM Network): http://postimg.org/image/7hrog0a2n/ http://postimg.org/image/68b40i1vr/ http://postimg.org/image/lu6mlshgp/ http://postimg.org/image/540o1qc0t/ http://postimg.org/image/4kyg787bt/ http://postimg.org/image/v7ralh7zb/ http://postimg.org/image/kn903cl03/ For any idea, thanks in advance ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Error in Upload Image
hi,all I use engine-image-uploader to upload a win7 ovf to export domain but failed. The Error Message as below: [root@rhevm ~]# engine-image-uploader -e export_debug --insecure -f upload win7_sikuli.ovf Please provide the REST API password for the admin@internal oVirt Engine user (CTRL+D to abort): ERROR: Unable to update the disk ID in the OVF XML. Message: global name 'n_id_d' is not defined How can I fix it? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-announce] [ANN] oVirt 3.6.0 Second Alpha Release is now available for testing
Hi, due to an issue in the repository creation tool some of the rpms supposed to be in ovirt-3.6.0-pre repository have not been published. We're currently fixing the issue. Sorry for the inconvenient. Il 29/06/2015 11:39, Sandro Bonazzola ha scritto: The oVirt Project is pleased to announce the availability of the Second Alpha release of oVirt 3.6 for testing, as of June 29, 2015. oVirt is an open source alternative to VMware vSphere, and provides an excellent KVM management interface for multi-node virtualization. The Second Alpha release is available now for Fedora 20, Red Hat Enterprise Linux 6.6, CentOS 6.6 (or similar) and Red Hat Enterprise Linux 7.1, CentOS 7.1 (or similar). The Second Alpha release can also be deployed on Hypervisor Hosts running Fedora 21 and Fedora 22. Experimental support for Debian 8.1 Jessie has been added too. This Second Alpha release of oVirt includes numerous bug fixes. See the release notes [1] for an initial list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. A new oVirt Live ISO[2] and Node ISO[3] are already available. Please note that mirrors[4] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.6_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/ovirt-live/el7-alpha2/ovirt-live-el7-alpha2.iso [3] http://plain.resources.ovirt.org/pub/ovirt-3.6-pre/iso/ovirt-node/ovirt-node-iso-3.6-0.999.201506272015.el7.centos.iso [4] http://www.ovirt.org/Repository_mirrors#Current_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Autostart VM
Hi Guys, I couldn't find anything directly concerning my following question, so If it was asked before, I'm sorry... Is there a way to config ovirt in a way that when you created a new vm, it will automatically boot? Because now, when you create a VM it stays in down state. Kind regards, Koen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM run once API required
On 06/30/2015 08:16 AM, Chandrahasa S wrote:
Hi Experts,
We are integrating RHEV(M) with our internal cloud portal using RHEV(M)
API, we are able to provision Linux VM using API. But IP and Hostname
not getting reflected on vm first boot. If we boot VM manually using
run once its working fine. We are not able to find any run once API on
RHEV end.
Requested your help on this.
Assuming that you already installed cloud-init in the VM and that you
want to specify the cloud-init parameters as part of the request to
start the VM, then you will need something like this:
---8---
!/bin/sh -ex
url=https://engine.example.com/ovirt-engine/api;
user=admin@internal
password=...
curl \
--insecure \
--user ${user}:${password} \
--request POST \
--header Content-Type: application/xml \
--header Accept: application/xml \
--data '
action
vm
initialization
cloud_init
host
addressmyhost.example.com/address
/host
network_configuration
nics
nic
nameeth0/name
network
ip netmask=255.255.255.0 gateway=10.10.10.1
address=10.10.10.1/
/network
boot_protocolstatic/boot_protocol
on_boottrue/on_boot
/nic
/nics
/network_configuration
/cloud_init
/initialization
/vm
/action
' \
${url}/vms/0f3c320-a409-4e9f-918e-3172818d54ed/start
---8---
If you prefer the Python SDK (which is much better the moment you want
to do something more complicated) then it should be something like this:
---8---
#!/usr/bin/python
from ovirtsdk import api
from ovirtsdk.xml import params
api = api.API(
url=https://engine.example.com/ovirt-engine/api;,
username=admin@internal,
password=...,
insecure=True
)
vm = api.vms.get(name=myvm)
action = params.Action(
vm=params.VM(
initialization=params.Initialization(
cloud_init=params.CloudInit(
host=params.Host(
address=myhost.example.com
),
network_configuration=params.NetworkConfiguration(
nics=params.Nics(
nic=[
params.NIC(
name=eth0,
boot_protocol=static,
on_boot=True,
network=params.Network(
ip=params.IP(
address=10.10.10.1,
netmask=255.255.255.0,
gateway=10.10.10.1
)
)
)
]
)
)
)
)
)
)
vm.start(action)
api.disconnect()
---8---
You can also use the Java SDK, let me know if you need an example of that.
Thanks Regards
Chandrahasa S
=-=-=
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
3ºD, 28016 Madrid, Spain
Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
Hi Donny We have HP Switches (HP 5406zl) and they are configurated on trunk mode. (VMware is configurated to use that). Any suggestion ? Thanks for your response. :) 2015-06-30 17:51 GMT-05:00 Donny Davis do...@cloudspin.me: Vlans are layer 2, sounds like a tagging problem. Cisco switches? The tag sticks to the host bridge, but is being stripped off when it leaves the host Is your switch in access mode or trunk? Hi Friends of oVirt I'm trying to migrate my company from VMware to oVirt. In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) The Virtual Machines in these VLANs, can be reached from the external IPs from the net range, but from the Virtual machines only can ping the Host with the Bridge and itself, can't reach the gateway. ¿? I configured a IP Forwarding in the Host with the virtual machine, and nothing changes... Any idea ? This is the last duty before embrace oVirt in the company. Look to the VLAN 100 configuration (My desired VM Network): http://postimg.org/image/7hrog0a2n/ http://postimg.org/image/68b40i1vr/ http://postimg.org/image/lu6mlshgp/ http://postimg.org/image/540o1qc0t/ http://postimg.org/image/4kyg787bt/ http://postimg.org/image/v7ralh7zb/ http://postimg.org/image/kn903cl03/ For any idea, thanks in advance ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] CloudSpin is Almost back
Hey guys I know CloudSpin has been down for quite a while. Its taking me a little longer than expected to get up and running again on my new connection. Mainly the lack of ipv6 on my static connection. I am working through it. I promised some server resources to aide in processes above my level, and I am happy to report that the resources are ready. Please email me if you are interested, and we can get the ball rolling. 2x quad cores, 32gb of ram(might be able to get to 64). And 6tb of raw disk space. Dedicated for the Ovirt Project, and what you guys need it to do. This is a physical machine, and as always when I get CloudSpin back up, any VMS you might want or need. Thanks for your patience Donny D CloudSpin.me ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] User is not authorized, ldap OK, but no user VM
version 3.5.2-1.el6 using ldap authz; this piece is working OK, and verified OK. I use the Everyone user to provide default permissions; that includes PowerUserRole for the data center, a bunch of usertemplatebasedVMs, some VnicProfileUser, DiskProfileUser, etc. I add a new user in LDAP; and verify LDAP credentials work (ie, log in to another system that uses the same ldap server) LDAP confirmed working for *other* ovirt users-- not an LDAP issue as far as I can tell. I do *not* specifically add each LDAP user to oVirt, they're added to groups in LDAP, so if they have the right group, they should be able to authenticate to oVirt and use the system without me adding each user individually. In any case the narrowed down problem is this: If the user doesn't have permissions (UserRole, etc) for *any* VMs, instead of logging in and getting a blank VM list, they get User is not authorized to perform this action. If I add that specific user to a test placeholder VM, they can log in. Once they have a VM created, I can erase their user-specific permissions to that initial test VM and everything works as expected. They are able to log in, create VMs, etc. If I remove all permissions for VMs from a user, they get this error. Expected behavior: User without any permissions to any VMs should simply get a blank VM list on login. That way they can create a VM and go from there. Thanks for any help/suggestions, David ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
Vlans are layer 2, sounds like a tagging problem. Cisco switches? The tag sticks to the host bridge, but is being stripped off when it leaves the host Is your switch in access mode or trunk? Hi Friends of oVirt I'm trying to migrate my company from VMware to oVirt. In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) The Virtual Machines in these VLANs, can be reached from the external IPs from the net range, but from the Virtual machines only can ping the Host with the Bridge and itself, can't reach the gateway. ¿? I configured a IP Forwarding in the Host with the virtual machine, and nothing changes... Any idea ? This is the last duty before embrace oVirt in the company. Look to the VLAN 100 configuration (My desired VM Network): http://postimg.org/image/7hrog0a2n/ http://postimg.org/image/68b40i1vr/ http://postimg.org/image/lu6mlshgp/ http://postimg.org/image/540o1qc0t/ http://postimg.org/image/4kyg787bt/ http://postimg.org/image/v7ralh7zb/ http://postimg.org/image/kn903cl03/ For any idea, thanks in advance ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] User is not authorized, ldap OK, but no user VM
Correct, each user has their own VMs. Only a few share VMs (those permissions are assigned manually) The issue is that when they have 0 VMs assigned to them, the system throws the login error that they're not authorized, at least until I add a placeholder VM so they can log in and set themselves up. On Tue, Jun 30, 2015 at 3:09 PM, Donny Davis do...@cloudspin.me wrote: You are looking for this to look like its multi tenant? I setup CloudSpin to do exactly that. Each user can only see their own VMS. Do I have your question correct? Donny D On Jun 30, 2015 5:27 PM, David Smith dsm...@mypchelp.com wrote: version 3.5.2-1.el6 using ldap authz; this piece is working OK, and verified OK. I use the Everyone user to provide default permissions; that includes PowerUserRole for the data center, a bunch of usertemplatebasedVMs, some VnicProfileUser, DiskProfileUser, etc. I add a new user in LDAP; and verify LDAP credentials work (ie, log in to another system that uses the same ldap server) LDAP confirmed working for *other* ovirt users-- not an LDAP issue as far as I can tell. I do *not* specifically add each LDAP user to oVirt, they're added to groups in LDAP, so if they have the right group, they should be able to authenticate to oVirt and use the system without me adding each user individually. In any case the narrowed down problem is this: If the user doesn't have permissions (UserRole, etc) for *any* VMs, instead of logging in and getting a blank VM list, they get User is not authorized to perform this action. If I add that specific user to a test placeholder VM, they can log in. Once they have a VM created, I can erase their user-specific permissions to that initial test VM and everything works as expected. They are able to log in, create VMs, etc. If I remove all permissions for VMs from a user, they get this error. Expected behavior: User without any permissions to any VMs should simply get a blank VM list on login. That way they can create a VM and go from there. Thanks for any help/suggestions, David ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] User is not authorized, ldap OK, but no user VM
Can you assign a specific user the power user role that has no VMS assigned to them? Can that user login? On Jun 30, 2015 6:32 PM, David Smith dsm...@mypchelp.com wrote: The users are attempting to log in via the user portal when they get the error. On Tue, Jun 30, 2015 at 3:28 PM, Donny Davis do...@cloudspin.me wrote: The power user role covers login, so that is not your problem. Is this on the user portal or webadmin? On Jun 30, 2015 6:20 PM, David Smith dsm...@mypchelp.com wrote: I used the everyone user at the data center level and added the permissions/role of PowerUserRole What other permission/role are you saying I should assign? Unfortunately we aren't using an ldap group so there's nothing to assign to an ldap group-- the users are filtered in such a manner that if they auth and get through the filter they should have access. On Tue, Jun 30, 2015 at 3:16 PM, Donny Davis do...@cloudspin.me wrote: Add login permissions only at the data center for the group. This allows them to login, but not view anything. You have to create custom permission to do what you are looking for. On Jun 30, 2015 6:13 PM, David Smith dsm...@mypchelp.com wrote: Correct, each user has their own VMs. Only a few share VMs (those permissions are assigned manually) The issue is that when they have 0 VMs assigned to them, the system throws the login error that they're not authorized, at least until I add a placeholder VM so they can log in and set themselves up. On Tue, Jun 30, 2015 at 3:09 PM, Donny Davis do...@cloudspin.me wrote: You are looking for this to look like its multi tenant? I setup CloudSpin to do exactly that. Each user can only see their own VMS. Do I have your question correct? Donny D On Jun 30, 2015 5:27 PM, David Smith dsm...@mypchelp.com wrote: version 3.5.2-1.el6 using ldap authz; this piece is working OK, and verified OK. I use the Everyone user to provide default permissions; that includes PowerUserRole for the data center, a bunch of usertemplatebasedVMs, some VnicProfileUser, DiskProfileUser, etc. I add a new user in LDAP; and verify LDAP credentials work (ie, log in to another system that uses the same ldap server) LDAP confirmed working for *other* ovirt users-- not an LDAP issue as far as I can tell. I do *not* specifically add each LDAP user to oVirt, they're added to groups in LDAP, so if they have the right group, they should be able to authenticate to oVirt and use the system without me adding each user individually. In any case the narrowed down problem is this: If the user doesn't have permissions (UserRole, etc) for *any* VMs, instead of logging in and getting a blank VM list, they get User is not authorized to perform this action. If I add that specific user to a test placeholder VM, they can log in. Once they have a VM created, I can erase their user-specific permissions to that initial test VM and everything works as expected. They are able to log in, create VMs, etc. If I remove all permissions for VMs from a user, they get this error. Expected behavior: User without any permissions to any VMs should simply get a blank VM list on login. That way they can create a VM and go from there. Thanks for any help/suggestions, David ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
