[ovirt-users] all active domains with status unknown in old 4.3 cluster
Hi, Currently I'm debugging a client's ovirt 4.3 cluster. I was adding two new gluster domains and got a timeout "VDSM command AttachStorageDomainVDS failed: Resource timeout: ()" and "Failed to attach Storage Domain *** to Data Center **". Then I had to restart ovirt-engine and now all the domains including NFS domains have status "unknown" and I see "VDSM command GetStoragePoolInfoVDS failed: Resource timeout: ()" in the events. Anyone fixed this before or have any tips? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CH3S7NMWXVV2WJEOLB3LUY2MVINCV5VB/
[ovirt-users] Re: CentOS 8 is dead
Hi, Personally I don't really see the problem with the CentOS stream switch. Not trying to start a long discussion but I think it will be even be an improvement. Currently we use different combinations of EPEL, SCL, Elrepo etc. just to get some newer packages and a lot of people do the same and have no issues with this. oVirt even uses EPEL packages as dependency. Most of these will become redundant because of stream... Actually Red Hat has the same strategy for oVirt, it's an upstream for Red Hat Virtualization. So with the new CentOS strategy you will be one step ahead on OS and virtualization manager of the paid version. Testing is always required and with tooling like Katello you can push the packages after testing to production easily. If you need enterprise grade stability and support that much, then you should buy it or hire people to do it in house. Just my 2c as I see a lot of people getting really worked up about it. Jorick Astrego On 12/9/20 2:25 PM, Michal Skrivanek wrote: > >> On 9 Dec 2020, at 01:21, thilb...@generalpacific.com wrote: >> >> I to would like to see if Ubuntu could become a bit more main stream with >> oVirt now that CentOS is gone. I'm sure we won't hear anything until 2021 >> the oVirt staff need to figure out what to do now. > Right now we’re happy that CentOS 8.3 is finally here. That aligns 4.4.3 and > 4.4.4 again, makes the 4.5 cluster level usable, tons of bug fixes. > Afterwards…well, I think Stream is not a bad option, we already have it in > some form. I suppose it’s going to be the most feasible option. > For anything else *someone* would need to do all the work. And I don’t mean > it in a way that we - all the people with @redhat.com address - are forbidden > to do that or something, it’s really about the sheer amount of work and > dedication required, doubling the integration efforts. oVirt is (maybe > surprisingly) complex and testing it on any new platform means a lot of extra > manpower. > > >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/7HHQH2XIHK2VPV4TTERO2NH7DGEYUWV4/ > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/JCX24N4UYHZ6HAIE32D2FV4ZT3BAIZYH/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2KYL7E76HKVP2F2JPCCUI6BRUARLAGCT/
[ovirt-users] Re: which cpu type should I chose ??
Hi, It appears to be a "Kaby Lake R" processor, what version of ovirt do you run on what OS? Did you enable nested virtualization for Virtualbox? https://www.linuxtechi.com/enable-nested-virtualization-virtualbox-linux/ *By default nested virtualization in Oracle VM VirtualBox on linux system is disabled.* With the release of VirtualBox 6.1 we can enable nested virtualization on Intel CPUs starting with 5th generation Core i. Regards, Jorick Astrego On 7/22/20 2:28 PM, Lucia Jelinkova wrote: > Hi, > > when you go to the Host details, General tab, there is a CPU Type > field. The info icon should list all CPU types supported by the host. > Screenshot from 2020-07-22 14-25-36.png > Hope that helps. > > Lucia > > On Tue, Jul 21, 2020 at 11:05 AM tommy <mailto:sz_cui...@163.com>> wrote: > > Hi: > > > > 1.My server using as ovirt host is built on virtualbox and the cpu > info is: > > > > vendor_id : GenuineIntel > > cpu family : 6 > > model : 142 > > model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz > > stepping : 10 > > cpu MHz : 1992.002 > > cache size : 8192 KB > > physical id : 0 > > siblings : 3 > > core id : 2 > > cpu cores : 3 > > apicid : 2 > > initial apicid : 2 > > fpu : yes > > fpu_exception : yes > > cpuid level : 22 > > wp : yes > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr > pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx > rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid > tsc_known_freq pni pclmulqdq vmx ssse3 cx16 pcid sse4_1 sse4_2 > x2apic movbe popcnt aes xsave avx rdrand hypervisor lahf_lm abm > 3dnowprefetch invpcid_single pti tpr_shadow flexpriority fsgsbase > avx2 invpcid rdseed clflushopt md_clear flush_l1d > > bugs : cpu_meltdown spectre_v1 spectre_v2 > spec_store_bypass l1tf mds swapgs itlb_multihit srbds > > bogomips : 3984.00 > > clflush size : 64 > > cache_alignment : 64 > > address sizes : 39 bits physical, 48 bits virtual > > power management: > > > > 2.On the ovirt host page it appears that the host is unusable.The > log info is: Host ohost3 moved to Non-Operational state as host > does not meet the cluster's minimum CPU level. Missing CPU > features : model_IvyBridge, ssbd, spec_ctrl > > > > 3.I think the problem is on cluster’s cpu type setting, but which > one should I chose to fit for the host? > > > > > > > > > > > > > > ___ > Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> > To unsubscribe send an email to users-le...@ovirt.org > <mailto:users-le...@ovirt.org> > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/MN43IHE7V3YAAT6FWHGTWZJKQOQ4MSL4/ > > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/AGXNYKDTD24KY63FVHCYTS464HGDT3WU/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NIYDK35MQMFHGF7ZKX4EGROIJ6YMPHNI/
[ovirt-users] invalid spf record for ovirt.org
Hi, During routine maintenance on our mailserver I noticed the following in the log: [22/Jul/2020 14:33:33] Error when parsing SPF TXT record for domain: ovirt.org, envelope-from=users-boun...@ovirt.org, message: Invalid character found near "" in "66.187.233.88" A check on MXtoolbox also gives an invalid systax error: v=spf1 a:mail.ovirt.org a:gerrit.ovirt.org 66.187.233.88 ~all Prefix TypeValue PrefixDesc Description Error v spf1 The SPF record version + a mail.ovirt.org PassMatch if IP has a DNS 'A' record in given domain. + a gerrit.ovirt.orgPassMatch if IP has a DNS 'A' record in given domain. + 66.187.233.88 PassUnknown Unknown mechanisms are not allowed ~ all SoftFailAlways matches. It goes at the end of your record. TestResult <https://mxtoolbox.com/problem/spf/spf-syntax-check?page=prob_spf=spf:ovirt.org=1=0=1> SPF Syntax CheckInvalid syntax found Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/I4MDC4WBOOHE4TYDW4OL5SRGV7S44BIH/
[ovirt-users] Re: Speed Issues
On 3/24/20 7:25 PM, Alex McWhirter wrote: > Red hat also recommends a shard size of 512mb, it's actually the only > shard size they support. Also check the chunk size on the LVM thin > pools running the bricks, should be at least 2mb. Note that changing > the shard size only applies to new VM disks after the change. Changing > the chunk size requires making a new brick. > Regarding the chunk size, red hat tells me it depends on RAID or JBOD https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.5/html/administration_guide/Brick_Configuration chunksize An important parameter to be specified while creating a thin pool is the chunk size,which is the unit of allocation. For good performance, the chunk size for the thin pool and the parameters of the underlying hardware RAID storage should be chosen so that they work well together. And regarding the shard size, you can fix that with storage live migration right? Use two volumes and domains and move them so they will adopt the new shard size... Am I correct that when you change the sharding on a running volume, it only applies for new disks? Or does it also apply to extensions to a current disk? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UWTZEA54MHSX2AY233DYZZA2KICRPUAM/
[ovirt-users] Re: Speed Issues
On 3/27/20 11:01 AM, Christian Reiss wrote: > Hey Strahil, > > as always: thanks! > > On 24/03/2020 12:23, Strahil Nikolov wrote: > >> performance.write-behind-window-size: 64MB (shard size) > > This one doubled my speed from 200mb to 400mb!! > > I think this is where the meat is at. > > -Chris. Won't this increase the risk of data loss? We have everything on dual power feeds etc, so the risk of the having all or 2/3's of the gluster nodes fail at the same time is very minimal. But still when that happens? And with a shard size of 512MB this would be performance.write-behind-window-size: 512MB? Always tweaking ;-) Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2LCGZG5RP5AYWRYHM3XDFOJY6ZVY7CUL/
[ovirt-users] Re: main channel: failed to connect HTTP proxy connection not allowed
Duh, too long a day. I disabled the spice proxy in the console options. Still doesn't explain why it also fails when using the userportal console. Regards, Jorick Astrego On 2/21/20 4:33 PM, Jorick Astrego wrote: > > Hi, > > Having a spice console issue on our new 4.3.8 cluster. The console > stays blank and with the cli and debug on, I get the following error > "main channel: failed to connect HTTP proxy connection not allowed" > > We have a userportal through haproxy so this is configured in ovirt engine > > engine-config -g SpiceProxyDefault > SpiceProxyDefault: http://userportal.*.*:/ version: general > > But the same setting works fine on our 4.2 cluster. > > I can telnet to the ports on the 4.3.8 hosts without issue. > > Non working console on newer cluster: > > remote-viewer -v --debug console.vv > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.697: Opening > display to console.vv > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.700: Guest > (null) has a spice display > Guest (null) has a spice display > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.789: Spice > foreign menu updated > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.790: After open > connection callback fd=-1 > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.790: Opening > connection to display at console.vv > Opening connection to display at console.vv > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.791: fullscreen > display 0: 0 > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.791: app is not > in full screen > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.792: New spice > channel 0x55704bf70d40 SpiceMainChannel 0 > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.793: notebook > show status 0x55704b820280 > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: main > channel: failed to connect HTTP proxy connection not allowed > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: Destroy > SPICE channel SpiceMainChannel 0 > (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: zap main > channel > > (remote-viewer:29267): virt-viewer-WARNING **: 16:24:24.969: > Channel error: HTTP proxy connection not allowed > > Working console on older cluster: > > remote-viewer -v --debug console.vv > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.111: Opening > display to console.vv > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.111: Guest > (null) has a spice display > Guest (null) has a spice display > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: Spice > foreign menu updated > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: After open > connection callback fd=-1 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: Opening > connection to display at console.vv > Opening connection to display at console.vv > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.211: fullscreen > display 0: 0 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.211: app is not > in full screen > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.212: New spice > channel 0x556a03f7e820 SpiceMainChannel 0 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.212: notebook > show status 0x556a03c7a280 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.397: main > channel: opened > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.397: notebook > show status 0x556a03c7a280 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.404: > virt_viewer_app_set_uuid_string: UUID changed to > a2d64ffe-7583-45b6-92f3-87661039388c > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.404: app is not > in full screen > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.502: app is not > in full screen > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.514: New spice > channel 0x556a043bb660 SpiceDisplayChannel 0 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.514: New spice > channel 0x556a0422b570 SpiceCursorChannel 0 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.515: New spice > channel 0x556a0422c000 SpiceInputsChannel 0 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.515: new inputs > channel > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.661: creating > spice display (#:0) > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.661: Insert > display 0 0x556a03ca29e0 > (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.699: creating > spice display (#:1) > (remote
[ovirt-users] main channel: failed to connect HTTP proxy connection not allowed
ewer:29334): virt-viewer-DEBUG: 16:26:00.074: Allocated 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:00.074: Child allocate 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:04.846: Allocated 1024x768 (remote-viewer:29334): virt-viewer-DEBUG: 16:26:04.846: Child allocate 1024x768 Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WSIYJ5WQC75F4VHVE46DS6YOWCTCMQ7D/
[ovirt-users] Re: oVirt & Zabbix agent
Hi, We've been running zabbix for years without issues. I also really don't know what issues it could cause, it's just an agent using little resources connecting to a specific port that isn't used by any other program. Haven't heard any issues with it running on any host for many years . Regards, Jorick On 2/14/20 7:46 PM, Diggy Mc wrote: > Are there any known issues with running the Zabbix agent on either the Hosted > Engine (4.3.8) or oVirt Nodes (4.3.8) ??? I'd like to install the agent > while not crashing my hosting environment. > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/DR3LNJFP2KV53DMXESZCI4MIFR3ZCNUQ/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QD6N7C2X7QLHRUFDRLY6ZTYPAP4A5ZA3/
[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain
On 2/10/20 1:27 PM, Jorick Astrego wrote: > > Hmm, I didn't notice that. > > I did a check on the NFS server and I found the > "1ed0a635-67ee-4255-aad9-b70822350706" in the exportdom path > (/data/exportdom). > > This was an old NFS export domain that has been deleted for a while > now. I remember finding somewhere an issue with old domains still > being active after removal but I cannot find it now. > > I unexported the directory on the nfs server and now I have to correct > mount and it activates fine. > > Thanks! > Still weird that it picks another nfs mount path to mount that has been removed months ago from engine. It's not listed in the database on engine: engine=# select * from storage_domain_static ; id | storage | storage_name | storage_domain_type | storage_type | storage_domain_format_type | _create_date | _update_date | reco verable | last_time_used_as_master | storage_description | storage_comment | wipe_after_delete | warning_low_space_indicator | critical_space_action_blocker | first_metadata_device | vg_metadata_device | discard_after_delet e | backup | warning_low_confirmed_space_indicator | block_size --+--++-+--++---+---+- +--++-+---+-+---+---++ --++---+ 782a61af-a520-44c4-8845-74bf92888552 | 640ab34d-aa5d-478b-97be-e3f810558628 | ISO_DOMAIN | 2 | 1 | 0 | 2017-11-16 09:49:49.225478+01 | | t | 0 | ISO_DOMAIN | | f | | | | | f | f | | 512 072fbaa1-08f3-4a40-9f34-a5ca22dd1d74 | ceab03af-7220-4d42-8f5c-9b557f5d29af | ovirt-image-repository | 4 | 8 | 0 | 2016-10-14 20:40:44.700381+02 | 2018-04-06 14:03:31.201898+02 | t | 0 | Public Glance repository for oVirt | | f | | | | | f | f | | 512 b30bab9d-9a66-44ce-ad17-2eb4ee858d8f | 40d191b0-b7f8-48f9-bf6f-327275f51fef | ssd-6 | 1 | 7 | 4 | 2017-06-25 12:45:24.52974+02 | 2019-01-24 15:35:57.013832+01 | t | 1498461838176 | | | f | 10 | 5 | | | f | f | | 512 95b4e5d2-2974-4d5f-91e4-351f75a15435 | f11fed97-513a-4a10-b85c-2afe68f42608 | ssd-3 | 1 | 7 | 4 | 2019-01-10 12:15:55.20347+01 | 2019-01-24 15:35:57.013832+01 | t | 0 | | | f | 10 | 5 | | | f | f | 10 | 512 f5d2f7c6-093f-46d6-a844-224d92db5ef9 | b8b456f0-27c3-49b9-b5e9-9fa81fb3cdaa | backupnfs | 1 | 1 | 4 | 2018-01-19 13:31:25.899738+01 | 2019-02-14 14:36:22.3171+01 | t | 1530772724454 | | | f | 10 | 5 | | | f | f | 0 | 512 33f1ba00-6a16-4e58-b4c5-94426f1c4482 | 6b6b7899-c82b-4417-b453-0b3b0ac11deb | ssd-4 | 1 | 7 | 4
[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain
On 2/10/20 11:09 AM, Amit Bawer wrote: > compared it with host having nfs domain working > this > > On Mon, Feb 10, 2020 at 11:11 AM Jorick Astrego <mailto:jor...@netbulae.eu>> wrote: > > > On 2/9/20 10:27 AM, Amit Bawer wrote: >> >> >> On Thu, Feb 6, 2020 at 11:07 AM Jorick Astrego >> mailto:jor...@netbulae.eu>> wrote: >> >> Hi, >> >> Something weird is going on with our ovirt node 4.3.8 install >> mounting a nfs share. >> >> We have a NFS domain for a couple of backup disks and we have >> a couple of 4.2 nodes connected to it. >> >> Now I'm adding a fresh cluster of 4.3.8 nodes and the >> backupnfs mount doesn't work. >> >> (annoying you cannot copy the text from the events view) >> >> The domain is up and working >> >> ID:f5d2f7c6-093f-46d6-a844-224d92db5ef9 >> Size:10238 GiB >> Available:2491 GiB >> Used:7747 GiB >> Allocated:3302 GiB >> Over Allocation Ratio:37% >> Images:7 >> Path:*.*.*.*:/data/ovirt >> NFS Version:AUTO >> Warning Low Space Indicator:10% (1023 GiB) >> Critical Space Action Blocker:5 GiB >> >> But somehow the node appears to thin thinks it's an LVM >> volume? It tries to find the VGs volume group but fails... >> which is not so strange as it is an NFS volume: >> >> 2020-02-05 14:17:54,190+ WARN (monitor/f5d2f7c) >> [storage.LVM] Reloading VGs failed >> (vgs=[u'f5d2f7c6-093f-46d6-a844-224d92db5ef9'] rc=5 >> out=[] err=[' Volume group >> "f5d2f7c6-093f-46d6-a844-224d92db5ef9" not found', ' >> Cannot process volume group >> f5d2f7c6-093f-46d6-a844-224d92db5ef9']) (lvm:470) >> 2020-02-05 14:17:54,201+ ERROR (monitor/f5d2f7c) >> [storage.Monitor] Setting up monitor for >> f5d2f7c6-093f-46d6-a844-224d92db5ef9 failed (monitor:330) >> Traceback (most recent call last): >> File >> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", >> line 327, in _setupLoop >> self._setupMonitor() >> File >> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", >> line 349, in _setupMonitor >> self._produceDomain() >> File "/usr/lib/python2.7/site-packages/vdsm/utils.py", >> line 159, in wrapper >> value = meth(self, *a, **kw) >> File >> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", >> line 367, in _produceDomain >> self.domain = sdCache.produce(self.sdUUID) >> File >> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", >> line 110, in produce >> domain.getRealDomain() >> File >> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", >> line 51, in getRealDomain >> return self._cache._realProduce(self._sdUUID) >> File >> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", >> line 134, in _realProduce >> domain = self._findDomain(sdUUID) >> File >> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", >> line 151, in _findDomain >> return findMethod(sdUUID) >> File >> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", >> line 176, in _findUnfetchedDomain >> raise se.StorageDomainDoesNotExist(sdUUID) >> StorageDomainDoesNotExist: Storage domain does not exist: >> (u'f5d2f7c6-093f-46d6-a844-224d92db5ef9',) >> >> The volume is actually mounted fine on the node: >> >> On NFS server >> >> Feb 5 15:47:09 back1en rpc.mountd[4899]: authenticated >> mount request from *.*.*.*:673 for /data/ovirt (/data/ovirt) >> >> On the host >> >> mount|grep nfs >> >> *.*.*.*:/data/ovirt on >> /rhev/data-center/mnt/*.*.
[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain
On 2/9/20 10:27 AM, Amit Bawer wrote: > > > On Thu, Feb 6, 2020 at 11:07 AM Jorick Astrego <mailto:jor...@netbulae.eu>> wrote: > > Hi, > > Something weird is going on with our ovirt node 4.3.8 install > mounting a nfs share. > > We have a NFS domain for a couple of backup disks and we have a > couple of 4.2 nodes connected to it. > > Now I'm adding a fresh cluster of 4.3.8 nodes and the backupnfs > mount doesn't work. > > (annoying you cannot copy the text from the events view) > > The domain is up and working > > ID:f5d2f7c6-093f-46d6-a844-224d92db5ef9 > Size:10238 GiB > Available:2491 GiB > Used:7747 GiB > Allocated:3302 GiB > Over Allocation Ratio:37% > Images:7 > Path:*.*.*.*:/data/ovirt > NFS Version:AUTO > Warning Low Space Indicator:10% (1023 GiB) > Critical Space Action Blocker:5 GiB > > But somehow the node appears to thin thinks it's an LVM volume? It > tries to find the VGs volume group but fails... which is not so > strange as it is an NFS volume: > > 2020-02-05 14:17:54,190+ WARN (monitor/f5d2f7c) > [storage.LVM] Reloading VGs failed > (vgs=[u'f5d2f7c6-093f-46d6-a844-224d92db5ef9'] rc=5 out=[] > err=[' Volume group "f5d2f7c6-093f-46d6-a844-224d92db5ef9" > not found', ' Cannot process volume group > f5d2f7c6-093f-46d6-a844-224d92db5ef9']) (lvm:470) > 2020-02-05 14:17:54,201+ ERROR (monitor/f5d2f7c) > [storage.Monitor] Setting up monitor for > f5d2f7c6-093f-46d6-a844-224d92db5ef9 failed (monitor:330) > Traceback (most recent call last): > File > "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", > line 327, in _setupLoop > self._setupMonitor() > File > "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", > line 349, in _setupMonitor > self._produceDomain() > File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line > 159, in wrapper > value = meth(self, *a, **kw) > File > "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", > line 367, in _produceDomain > self.domain = sdCache.produce(self.sdUUID) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", > line 110, in produce > domain.getRealDomain() > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", > line 51, in getRealDomain > return self._cache._realProduce(self._sdUUID) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", > line 134, in _realProduce > domain = self._findDomain(sdUUID) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", > line 151, in _findDomain > return findMethod(sdUUID) > File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", > line 176, in _findUnfetchedDomain > raise se.StorageDomainDoesNotExist(sdUUID) > StorageDomainDoesNotExist: Storage domain does not exist: > (u'f5d2f7c6-093f-46d6-a844-224d92db5ef9',) > > The volume is actually mounted fine on the node: > > On NFS server > > Feb 5 15:47:09 back1en rpc.mountd[4899]: authenticated mount > request from *.*.*.*:673 for /data/ovirt (/data/ovirt) > > On the host > > mount|grep nfs > > *.*.*.*:/data/ovirt on > /rhev/data-center/mnt/*.*.*.*:_data_ovirt type nfs > > (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,soft,nolock,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,mountaddr=*.*.*.*,mountvers=3,mountport=20048,mountproto=udp,local_lock=all,addr=*.*.*.*) > > And I can see the files: > > ls -alrt /rhev/data-center/mnt/*.*.*.*:_data_ovirt > total 4 > drwxr-xr-x. 5 vdsm kvm 61 Oct 26 2016 > 1ed0a635-67ee-4255-aad9-b70822350706 > > > What ls -lart for 1ed0a635-67ee-4255-aad9-b70822350706 is showing? ls -arlt 1ed0a635-67ee-4255-aad9-b70822350706/ total 4 drwxr-xr-x. 2 vdsm kvm 93 Oct 26 2016 dom_md drwxr-xr-x. 5 vdsm kvm 61 Oct 26 2016 . drwxr-xr-x. 4 vdsm kvm 40 Oct 26 2016 master drwxr-xr-x. 5 vdsm kvm 4096 Oct 26 2016 images drwxrwxrwx. 3 root root 86 Feb 5 14:37 .. Regards, Jorick Astrego Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts
[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain
Dear Amit. That is not exactly the issue we're facing; I have two clusters an old 4.2 cluster and a fresh 4.3 cluster. The DC is set to 4.2 because of this. I wish to bring the 4.3 cluster online and migrate everything to it, then remove the 4.2 cluster. This should be a path that can be taken imho. Otherwise I could upgrade the current 4.2 cluster althought it gets decomissioned but then I have the same problem with hosts upgraded to 4.3 not being able to connect to the NFS and able to be activated. Until I upgrade them all and set the cluster and DC to 4.3. I could detach the NFS domain for a bit, but we use this mount for backup disks of several VM's and I'd rather not migrate everything in a hurry or do without these backups for a longer time. Regards, Jorick Astrego On 2/8/20 11:51 AM, Amit Bawer wrote: > I doubt if you can use 4.3.8 nodes with a 4.2 cluster without > upgrading it first. But myabe members of this list could say differently. > > On Friday, February 7, 2020, Jorick Astrego <mailto:jor...@netbulae.eu>> wrote: > > > On 2/6/20 6:22 PM, Amit Bawer wrote: >> >> >> On Thu, Feb 6, 2020 at 2:54 PM Jorick Astrego > <mailto:jor...@netbulae.eu>> wrote: >> >> >> On 2/6/20 1:44 PM, Amit Bawer wrote: >>> >>> >>> On Thu, Feb 6, 2020 at 1:07 PM Jorick Astrego >>> mailto:jor...@netbulae.eu>> wrote: >>> >>> Here you go, this is from the activation I just did a >>> couple of minutes ago. >>> >>> I was hoping to see how it was first connected to host, but >>> it doesn't go that far back. Anyway, the storage domain type >>> is set from engine and vdsm never try to guess it as far as >>> I saw. >> >> I put the host in maintenance and activated it again, this >> should give you some more info. See attached log. >> >>> Could you query the engine db about the misbehaving domain >>> and paste the results? >>> >>> # su - postgres >>> Last login: Thu Feb 6 07:17:52 EST 2020 on pts/0 >>> -bash-4.2$ >>> LD_LIBRARY_PATH=/opt/rh/rh-postgresql10/root/lib64/ >>> /opt/rh/rh-postgresql10/root/usr/bin/psql engine >>> psql (10.6) >>> Type "help" for help. >>> engine=# select * from storage_domain_static where id = >>> 'f5d2f7c6-093f-46d6-a844-224d92db5ef9' ; >> >> >> engine=# select * from storage_domain_static where id = >> 'f5d2f7c6-093f-46d6-a844-224d92db5ef9' ; >> id | >> storage | storage_name | >> storage_domain_type | storage_type | >> storage_domain_format_type | >> _create_date | _update_date | >> recoverable | la >> st_time_used_as_master | storage_description | >> storage_comment | wipe_after_delete | >> warning_low_space_indicator | >> critical_space_action_blocker | first_metadata_device | >> vg_metadata_device | discard_after_delete | backup | >> warning_low_co >> nfirmed_space_indicator | block_size >> >> --+--+--+-+--++---+-+-+--- >> >> ---+-+-+---+-+---+---++--++--- >> + >> f5d2f7c6-093f-46d6-a844-224d92db5ef9 | >> b8b456f0-27c3-49b9-b5e9-9fa81fb3cdaa | backupnfs >> | 1 | 1 | >> 4 | 2018-01-19 >> 13:31:25.899738+01 | 2019-02-14 14:36:22.3171+01 | >> t | >> 1530772724454 | >> | | f >> | 10 >> | 5 | >> | | f | f >> | &g
[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain
On 2/6/20 6:22 PM, Amit Bawer wrote: > > > On Thu, Feb 6, 2020 at 2:54 PM Jorick Astrego <mailto:jor...@netbulae.eu>> wrote: > > > On 2/6/20 1:44 PM, Amit Bawer wrote: >> >> >> On Thu, Feb 6, 2020 at 1:07 PM Jorick Astrego > <mailto:jor...@netbulae.eu>> wrote: >> >> Here you go, this is from the activation I just did a couple >> of minutes ago. >> >> I was hoping to see how it was first connected to host, but it >> doesn't go that far back. Anyway, the storage domain type is set >> from engine and vdsm never try to guess it as far as I saw. > > I put the host in maintenance and activated it again, this should > give you some more info. See attached log. > >> Could you query the engine db about the misbehaving domain and >> paste the results? >> >> # su - postgres >> Last login: Thu Feb 6 07:17:52 EST 2020 on pts/0 >> -bash-4.2$ LD_LIBRARY_PATH=/opt/rh/rh-postgresql10/root/lib64/ >> /opt/rh/rh-postgresql10/root/usr/bin/psql engine >> psql (10.6) >> Type "help" for help. >> engine=# select * from storage_domain_static where id = >> 'f5d2f7c6-093f-46d6-a844-224d92db5ef9' ; > > > engine=# select * from storage_domain_static where id = > 'f5d2f7c6-093f-46d6-a844-224d92db5ef9' ; > id | > storage | storage_name | storage_domain_type | > storage_type | storage_domain_format_type | > _create_date | _update_date | > recoverable | la > st_time_used_as_master | storage_description | storage_comment > | wipe_after_delete | warning_low_space_indicator | > critical_space_action_blocker | first_metadata_device | > vg_metadata_device | discard_after_delete | backup | > warning_low_co > nfirmed_space_indicator | block_size > > --+--+--+-+--++---+-+-+--- > > ---+-+-+---+-+---+---++--++--- > + > f5d2f7c6-093f-46d6-a844-224d92db5ef9 | > b8b456f0-27c3-49b9-b5e9-9fa81fb3cdaa | backupnfs > | 1 | 1 | > 4 | 2018-01-19 13:31:25.899738+01 | > 2019-02-14 14:36:22.3171+01 | t | > 1530772724454 | | > | f | 10 > | 5 | > | | f | f > | > 0 | 512 > (1 row) > > > > Thanks for sharing, > > The storage_type in db is indeed NFS (1), storage_domain_format_type > is 4 - for ovirt 4.3 the storage_domain_format_type is 5 by default > and usually datacenter upgrade is required for 4.2 to 4.3 migration, > which not sure if possible in your current setup since you have 4.2 > nodes using this storage as well. > > Regarding the repeating monitor failure for the SD: > > 2020-02-05 14:17:54,190+ WARN (monitor/f5d2f7c) [storage.LVM] > Reloading VGs failed (vgs=[u'f5d2f7c6-093f-46d6-a844-224d92db5ef9'] > rc=5 out=[] err=[' Volume group > "f5d2f7c6-093f-46d6-a844-224d92db5ef9" not found', ' Cannot process > volume group f5d2f7c6-093f-46d6-a844-224d92db5ef9']) (lvm:470) > > This error means that the monitor has tried to query the SD as a VG > first and failed, this is expected for the fallback code called for > finding a domain missing from SD cache: > > def_findUnfetchedDomain(self, sdUUID): > ... > formod in(blockSD, glusterSD, localFsSD, nfsSD): > try: > returnmod.findDomain(sdUUID) > exceptse.StorageDomainDoesNotExist: > pass > exceptException: > self.log.error( > "Error while looking for domain `%s`", > sdUUID, exc_info=True) > raisese.StorageDomainDoesNotExist(sdUUID) > > 2020-02-05 14:17:54,201+ ERROR (monitor/f5d2f7c) [storage.Monitor] > Setting up monitor for f5d2f7c6-093f-46d6-a844-224d92db5ef9 failed > (monitor:330) > Traceback (most recent call last): > File "/us
[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain
On 2/6/20 12:08 PM, Gianluca Cecchi wrote: > On Thu, Feb 6, 2020 at 10:07 AM Jorick Astrego <mailto:jor...@netbulae.eu>> wrote: > > Hi, > > [snip] > > (annoying you cannot copy the text from the events view) > > > > I don't know if I understood correctly your concern, but in my case if > I go in Hosts --> Events > and double click on a line I have a pop-up window named "Event > Details" where I can copy and paste "ID" "Time" and "Message" fields' > values. > Not so friendly but it works > > I don't know if from the Rest API you can also filter the kind of > events to display, but at least you can do something like: > > curl -X GET -H "Accept: application/xml" -u $(cat ident_file ) > --cacert /etc/pki/ovirt-engine/ca.pem > https://engine_fqdn:443/ovirt-engine/api/events | grep description > > > HIH, > Gianluca Hi Gianluca, Thanks, it's a bit counter intuitive but that works! Regards, Jorick Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PARQXHWTUNOCA6RFWCMB3NIZZ4XKHX2Y/
[ovirt-users] issue connecting 4.3.8 node to nfs domain
Hi, Something weird is going on with our ovirt node 4.3.8 install mounting a nfs share. We have a NFS domain for a couple of backup disks and we have a couple of 4.2 nodes connected to it. Now I'm adding a fresh cluster of 4.3.8 nodes and the backupnfs mount doesn't work. (annoying you cannot copy the text from the events view) The domain is up and working ID:f5d2f7c6-093f-46d6-a844-224d92db5ef9 Size:10238 GiB Available:2491 GiB Used:7747 GiB Allocated:3302 GiB Over Allocation Ratio:37% Images:7 Path:*.*.*.*:/data/ovirt NFS Version:AUTO Warning Low Space Indicator:10% (1023 GiB) Critical Space Action Blocker:5 GiB But somehow the node appears to thin thinks it's an LVM volume? It tries to find the VGs volume group but fails... which is not so strange as it is an NFS volume: 2020-02-05 14:17:54,190+ WARN (monitor/f5d2f7c) [storage.LVM] Reloading VGs failed (vgs=[u'f5d2f7c6-093f-46d6-a844-224d92db5ef9'] rc=5 out=[] err=[' Volume group "f5d2f7c6-093f-46d6-a844-224d92db5ef9" not found', ' Cannot process volume group f5d2f7c6-093f-46d6-a844-224d92db5ef9']) (lvm:470) 2020-02-05 14:17:54,201+ ERROR (monitor/f5d2f7c) [storage.Monitor] Setting up monitor for f5d2f7c6-093f-46d6-a844-224d92db5ef9 failed (monitor:330) Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", line 327, in _setupLoop self._setupMonitor() File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", line 349, in _setupMonitor self._produceDomain() File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 159, in wrapper value = meth(self, *a, **kw) File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py", line 367, in _produceDomain self.domain = sdCache.produce(self.sdUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 110, in produce domain.getRealDomain() File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 51, in getRealDomain return self._cache._realProduce(self._sdUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 134, in _realProduce domain = self._findDomain(sdUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 151, in _findDomain return findMethod(sdUUID) File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line 176, in _findUnfetchedDomain raise se.StorageDomainDoesNotExist(sdUUID) StorageDomainDoesNotExist: Storage domain does not exist: (u'f5d2f7c6-093f-46d6-a844-224d92db5ef9',) The volume is actually mounted fine on the node: On NFS server Feb 5 15:47:09 back1en rpc.mountd[4899]: authenticated mount request from *.*.*.*:673 for /data/ovirt (/data/ovirt) On the host mount|grep nfs *.*.*.*:/data/ovirt on /rhev/data-center/mnt/*.*.*.*:_data_ovirt type nfs (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,soft,nolock,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,mountaddr=*.*.*.*,mountvers=3,mountport=20048,mountproto=udp,local_lock=all,addr=*.*.*.*) And I can see the files: ls -alrt /rhev/data-center/mnt/*.*.*.*:_data_ovirt total 4 drwxr-xr-x. 5 vdsm kvm 61 Oct 26 2016 1ed0a635-67ee-4255-aad9-b70822350706 -rwxr-xr-x. 1 vdsm kvm 0 Feb 5 14:37 __DIRECT_IO_TEST__ drwxrwxrwx. 3 root root 86 Feb 5 14:37 . drwxr-xr-x. 5 vdsm kvm 4096 Feb 5 14:37 .. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IFTO5WBLVLGTVWKYN3BGLOHAC453UBD5/
[ovirt-users] Re: SPM contending loop
Hi Jayme, The only thing I can find related to the vdsm errors you post is https://bugzilla.redhat.com/show_bug.cgi?id=1493184 Nir states it's just a logging issue so that doesn't help to much. What version are you running? Anything in the gluster logs on the node? Nir Soffer 2018-06-25 12:27:16 UTC These exceptions: OSError: [Errno 2] No such file or directory ... TaskMetaDataLoadError: Can't load Task Metadata: ('/rhev/data-center/e6c5d8a2-5386-11e8-8885-004655214801/mastersd/master/tasks/60bf8af9-d4d3-4753-a40d-2a8d028d3d3c/60bf8af9-d4d3-4753-a40d-2a8d028d3d3c.recover.0',) Mean that a dumped task could not not loaded because there was no such file in the task directory. This error does not effect the SPM start process, the code is trying to load dumped tasks and ignore the result of the load. So this looks like log issue, moving severity to low since I don't see any real issue. Regarding the exceptions, we have several issues: 1. Logging several exceptions for the same problem - we should log the same issue exactly once. This happens because the code using the anti-pattern of logging an exception and raising new one. 2. I'm not sure why we log a traceback for expected error like a missing dumped task file. This should be logged without a traceback. 3. I'm not sure why missing dumped task is an error, since the SPM code ignore it. This should be probably a warning. Regards, Jorick Astrego Netbulae On 1/14/20 3:27 AM, Jayme wrote: > My cluster appears to be experiencing an SPM problem. I recently > placed each host in maintenance to move the ovirt management network > to another interface. All was successful and all VMs are currently > running. However, I'm not facing an SPM contending loop with data > center going in and out of responsive status. > > I have a 3 server HCI setup and all volumes are active and healed, > there are no unsynced entries or split brains. > > Does anyone know how I could diagnose the SPM issue? > > engine.log: > > 2020-01-13 22:24:54,777-04 INFO > [org.ovirt.engine.core.vdsbroker.gluster.GlusterTasksListVDSCommand] > (DefaultQuartzScheduler2) [213adf4f] START, > GlusterTasksListVDSCommand(HostName = Orchard0, > VdsIdVDSCommandParametersBase:{hostId='771c67eb-56e6-4736-8c67-668502d4ecf5'}), > log id: 349f80a9 > 2020-01-13 22:24:55,231-04 INFO > [org.ovirt.engine.core.vdsbroker.gluster.GlusterTasksListVDSCommand] > (DefaultQuartzScheduler2) [213adf4f] FINISH, > GlusterTasksListVDSCommand, return: [], log id: 349f80a9 > 2020-01-13 22:24:58,245-04 INFO > [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] > (DefaultQuartzScheduler3) [4f66c75b] START, > GlusterServersListVDSCommand(HostName = Orchard0, > VdsIdVDSCommandParametersBase:{hostId='771c67eb-56e6-4736-8c67-668502d4ecf5'}), > log id: 7b04f110 > 2020-01-13 22:24:58,887-04 INFO > [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand] > (EE-ManagedThreadFactory-engineScheduled-Thread-72) [] Command > 'org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand' > return value ' > TaskStatusListReturn:{status='Status [code=654, message=Not SPM]'} > ' > 2020-01-13 22:24:58,888-04 INFO > [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand] > (EE-ManagedThreadFactory-engineScheduled-Thread-72) [] HostName = Orchard1 > 2020-01-13 22:24:58,888-04 ERROR > [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand] > (EE-ManagedThreadFactory-engineScheduled-Thread-72) [] Command > 'HSMGetAllTasksStatusesVDSCommand(HostName = Orchard1, > VdsIdVDSCommandParametersBase:{hostId='fb1e62d5-1dc1-4ccc-8b2b-cf48f7077d0d'})' > execution failed: IRSGenericException: IRSErrorException: > IRSNonOperationalException: Not SPM > 2020-01-13 22:24:59,034-04 INFO > [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] > (DefaultQuartzScheduler3) [4f66c75b] FINISH, > GlusterServersListVDSCommand, return: [10.12.0.220/24:CONNECTED > <http://10.12.0.220/24:CONNECTED>, > orchard1.grove.silverorange.com:CONNECTED, > orchard2.grove.silverorange.com:DISCONNECTED], log id: 7b04f110 > 2020-01-13 22:24:59,049-04 INFO > [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] > (DefaultQuartzScheduler3) [4f66c75b] START, > GlusterServersListVDSCommand(HostName = Orchard2, > VdsIdVDSCommandParametersBase:{hostId='fd0752d8-2d41-45b0-887a-0ffacbb8a237'}), > log id: 43f1dd82 > 2020-01-13 22:24:59,099-04 INFO > [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStoragePoolVDSCommand] > (EE-ManagedThreadFactory-engineScheduled-Thread-72) [] START, > ConnectStoragePoolVDSCommand(HostName = Orchard1, > ConnectStoragePoolVDSC
[ovirt-users] Re: [ANN] oVirt 4.3.8 Third Release Candidate is now available for testing
On 1/14/20 9:59 AM, Gianluca Cecchi wrote: > On Tue, Jan 14, 2020 at 8:57 AM Sandro Bonazzola <mailto:sbona...@redhat.com>> wrote: > > > > Il giorno lun 13 gen 2020 alle ore 15:17 Gianluca Cecchi > mailto:gianluca.cec...@gmail.com>> ha > scritto: > > On Wed, Jan 8, 2020 at 5:48 PM Lev Veyde <mailto:lve...@redhat.com>> wrote: > > The oVirt Project is pleased to announce the availability > of the oVirt 4.3.8 Third Release Candidate for testing, as > of January 8th, 2020. > > > Hello, > any confirmation if what described here: > https://bugzilla.redhat.com/show_bug.cgi?id=1768776 > has been merged for being tested in 4.3.8 3rd RC? > > > on oVirt side, code is in since 4.3.7 > > > Ok, thanks. > > > > In case with which version of OKD? > > > We are working for getting official inclusion in OKD 4.4 > > > > Just for clarification, as it is not so clear to me OCP 4.x <--> OKD > 4.y mapping, even after publishing the OKD roadmap (without any > date... what kind of roadmap is that?) here: > https://github.com/openshift/community/blob/master/ROADMAP.md > > Are you referring to the commercial OCP here? Because OKD 4.4 doesn't > sound as something defined yet... > Or anything consumable in OKD4 Preview right now? > > Gianluca > It sure looks like something not defined yet: https://github.com/openshift/community/issues/51 *dmueller2001 <https://github.com/dmueller2001> * commented on Oct 11, 2019 <https://github.com/openshift/community/issues/51#issue-505952024> Christian Glombek to present update on OKD Road Map CfA *Oct 15 2020* OKD WG Meeting Regards, Jorick Astrego > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/EN63R4BBTX3XTYXKQILA75HNDVVXKJCB/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BGOLYJDN2JE2FY44JJF75VQ7X2OKAB7Z/
[ovirt-users] Re: oVirt Open Source Backup solution?
On 5/16/19 4:12 PM, Derek Atkins wrote: > Jorick Astrego writes: > >> Maybe split it in 2 disks? One OS and one APP/DATA? You can then backup >> only one. >> >> I prefer to do this anyway as I then can just redeploy the OS and attach >> the second disk to get things back up and running. > Are you suggesting that /etc and /var should go onto their own disks? > There is lots of configuration in /etc (which is usually in the root > disk) that needs to be backed up. > > Also, different apps store configuration and data in different places, > so saying "just put it on a second disk" can be hard. > > Sure, it works fine for /home -- but mysql? imapd? ... > > -derek /etc for us is mostly generated by deployment and provisioning, in production at least so that is not a problem. All changes have to go through puppet/ansible. The /var I have been putting on a seperate disk for a long time. And a lot of VM's have separate disks for /data or /home. So this combination works for us but it depends on your layout and whether you have any provisioning/config management tools an procedures running. Regards, Jorick Astrego Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YEUDZEG6VDQMESWGQ4UJOKS77ACVB6ZW/
[ovirt-users] Re: oVirt Open Source Backup solution?
On 5/14/19 2:43 PM, Derek Atkins wrote: > Strahil Nikolov writes: > >> In such case , >> you use the same approach for the VM in whole - lock + snapshot on oVirt + >> unlock. >> This way you keep OS + app backup in one place , which has it's own Pluses >> and >> Minuses. > Sure But the minus being it requires SIGNIFICANTLY more space. > I've got over a dozen VMs, all running the same (pretty much) OS. > If I based up the VM Snaphot there would be 12x space usage for OS > files that I don't need to backup because I can recreate those from the > initial repositories. Of course, this is at the expense of more time to > restore from the backup. > > YMMV. Maybe split it in 2 disks? One OS and one APP/DATA? You can then backup only one. I prefer to do this anyway as I then can just redeploy the OS and attach the second disk to get things back up and running. Regards, Jorick Astrego >> Best Regards, >> Strahil Nikolov > -derek Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/M2KBXD2LWZZYAX3RSNXEMZZLU5JNXEUS/
[ovirt-users] Re: Prevent 2 different VMs from running on the same host
Hi, Yes, use affinity groups for this https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3-beta/html/virtual_machine_management_guide/sect-affinity_groups *The VM Affinity Rule* When you create an affinity group, you select the virtual machines that belong to the group. To define /where these virtual machines can run in relation to each other/, you enable a *VM Affinity Rule*: A positive rule tries to run the virtual machines together on a single host; a negative affinity rule tries to run the virtual machines apart on separate hosts. If the rule cannot be fulfilled, the outcome depends on whether the weight or filter module is enabled. On 4/24/19 12:45 PM, Paulo Silva wrote: > Hi, > > I have a cluster of 6 hosts using ovirt 4.3 and I want to make sure > that 2 VMs are always started on different hosts. > Is it possible to prevent 2 different VMs from running on the same > physical host without specifying manually a different set of hosts > where each VM can start running? > > Thanks > -- > Paulo Silva mailto:paulo...@gmail.com>> > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/KQ4LVNAZMIL6RPZVFS5Z4URUJ2RHCHIH/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DMSMGYVO5YW3HFSWH3FPBTBMCHJ32GKW/
[ovirt-users] spam
We get a lot of spam lately, anything that can be done about this? I see the list is powered by Mailman https://wikitech.wikimedia.org/wiki/Lists.wikimedia.org#Fighting_spam_in_mailman Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5CEVNY337NJAT7JMRPX4D34WQN6JUPTE/
[ovirt-users] Re: genev_sys_6081 left/entered promiscuous mode
On 3/26/19 2:17 PM, Arif Ali wrote: > On 25-03-2019 23:11, Arif Ali wrote: >> Hi all, >> >> I was wondering if anyone seen the messages below in the syslog. I see >> this set every second, and I am not sure why this is the case, and >> it's filling the logs quite a lot >> >> Mar 22 23:08:08 kernel: device genev_sys_6081 left promiscuous >> mode >> Mar 22 23:08:08 kernel: i40e :3d:00.0 eno3: port 6081 >> already offloaded >> Mar 22 23:08:08 kernel: i40e :3d:00.1 eno4: port 6081 >> already offloaded >> Mar 22 23:08:08 kernel: i40e :3d:00.2 eno5: port 6081 >> already offloaded >> Mar 22 23:08:08 kernel: i40e :3d:00.3 eno6: port 6081 >> already offloaded >> Mar 22 23:08:08 kernel: device genev_sys_6081 entered >> promiscuous mode >> Mar 22 23:08:09 kernel: i40e :3d:00.0 eno3: UDP port 6081 >> was not found, not deleting >> Mar 22 23:08:09 kernel: i40e :3d:00.1 eno4: UDP port 6081 >> was not found, not deleting >> Mar 22 23:08:09 kernel: i40e :3d:00.2 eno5: UDP port 6081 >> was not found, not deleting >> Mar 22 23:08:09 kernel: i40e :3d:00.3 eno6: UDP port 6081 >> was not found, not deleting >> Mar 22 23:08:09 kernel: device genev_sys_6081 left promiscuous >> mode > > So on top of this, in the Events tab, I see the error shown below > > VDSM command Get Host Statistics failed: Internal JSON-RPC > error: {'reason': '[Errno 19] genev_sys_6081 is not present in the > system'} > > > I see the following in the vdsm log too > > Mar 26 13:10:44 vdsm[62558]: ERROR Internal server error > Traceback (most recent call last): > File > "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 345, in > _handle_request > res = method(**params) > File > "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 198, in > _dynamicMethod > result = fn(*methodArgs) > File "", line 2, in > getStats > File > "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method > ret = func(*args, **kwargs) > File > "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1428, in getStats > multipath=True)} > File > "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 50, in > get_stats > decStats = > stats.produce(first_sample, last_sample) > File > "/usr/lib/python2.7/site-packages/vdsm/host/stats.py", line 72, in > produce > > stats.update(get_interfaces_stats()) > File > "/usr/lib/python2.7/site-packages/vdsm/host/stats.py", line 154, in > get_interfaces_stats > return net_api.network_stats() > File > "/usr/lib/python2.7/site-packages/vdsm/network/api.py", line 63, in > network_stats > return netstats.report() > File > "/usr/lib/python2.7/site-packages/vdsm/network/netstats.py", line 32, > in report > stats = link_stats.report() > File > "/usr/lib/python2.7/site-packages/vdsm/network/link/stats.py", line > 34, in report > stats[i.device] = > i.statistics() > File > "/usr/lib/python2.7/site-packages/vdsm/network/link/iface.py", line > 232, in statistics > 'state': 'up' if > self.is_oper_up() else 'down', > File > "/usr/lib/python2.7/site-packages/vdsm/network/link/iface.py", line > 193, in is_oper_up > properties = self.properties() > File > "/usr/lib/python2.7/site-packages/vdsm/network/link/iface.py", line > 165, in properties > info = link.get_link(self._dev) > File > &qu
[ovirt-users] Fwd: Re: VDI broker and oVirt
Forward to the list. Forwarded Message Subject:Re: [ovirt-users] Re: VDI broker and oVirt Date: Fri, 05 Apr 2019 04:52:13 -0400 From: a...@triadic.us As far as official software, the best you'll find is the user portal. There is also this... https://github.com/nkovacne/ovirt-desktop-client We used that as a code base for our own vdi connector using smart card pksc12 certs to auth to the ovirt API. On Apr 5, 2019 4:08 AM, Jorick Astrego wrote: Hi, I think you mean to ask about the connection broker to connect to your VDI infrastructure? Something like this: Or https://www.leostream.com/solution/remote-access-for-virtual-and-physical-workstations/ Ovirt has the VM user portal https://github.com/oVirt/ovirt-web-ui , but I have never used a third party connection broker myself so I'm not aware of any compatible with oVirt or RHEV... On 4/4/19 9:10 PM, oquerej...@gmail.com <mailto:oquerej...@gmail.com> wrote: I have Ovirt installed, with two hypervisor and Ovirt engine. I Want To mount a VDI infrastructure, as cheap as possible, but robust and reliable. The question is what broker I can use. Thank you. ___ Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org <mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GLH7Y5HCOMBYL7QBPOGOPRTQY247GNUD/ Met vriendelijke groet, With kind regards, Jorick Astrego * Netbulae Virtualization Experts * Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3AKvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA EnschedeBTW NL821234584B01 Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3CF4SKHPBC3KSWF6U6CHCOGBJ5M3N63R/
[ovirt-users] Re: VDI broker and oVirt
Hi, I think you mean to ask about the connection broker to connect to your VDI infrastructure? Something like this: Or https://www.leostream.com/solution/remote-access-for-virtual-and-physical-workstations/ Ovirt has the VM user portal https://github.com/oVirt/ovirt-web-ui , but I have never used a third party connection broker myself so I'm not aware of any compatible with oVirt or RHEV... On 4/4/19 9:10 PM, oquerej...@gmail.com wrote: > I have Ovirt installed, with two hypervisor and Ovirt engine. I Want To mount > a VDI infrastructure, as cheap as possible, but robust and reliable. The > question is what broker I can use. Thank you. > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/GLH7Y5HCOMBYL7QBPOGOPRTQY247GNUD/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EHSULIYRXUYFGDDFVQT7SAIKOBGVQASY/
[ovirt-users] Profile selection in VM portal for users
Hi, Wish I was @FOSDEM :'( Next year... When accessing the selfservice VM portal for users we wish to disable/hide our admin management realm. Is there currently a way to do this? We are maybe a bit paranoid but informatie leakage can bite you in the ass. We want to hookup Keycloak for the user portal and use the current ipa authentication for the admins only Met vriendelijke groet, With kind regards, Jorick Astrego THE IDIOT COMPANY Staalsteden 4-3A 7547 TA Enschede The Netherlands +31 (0)53 20 30 275 i...@theidiotcompany.eu WWW.THEIDIOTCOMPANY.EU ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LTQ4MVDBYKHX3ERRN5TVHUP5RUEVCJFG/
[ovirt-users] Re: Agentless Backup update: Trilio Vault, pay $7500
Hi, We are currently starting an evaluation of https://wiki.sep.de/wiki/index.php/RHEV_backup Our experiences with the supplier are excellent and it has been out for a while now. Testing of the actual software is scheduled for this month. Regards, Jorick Astrego Netbulae B.V. On 2/8/19 12:27 PM, Sinan Polat wrote: > Thanks for your post. I was recently looking for backup solutions > which supports RHV/oVirt and OpenStack. I saw Trilio is providing > this, but if I read your experience we should stay away from it. > > Other experiences? > > Op 8 feb. 2019 om 12:15 heeft femi adegoke <mailto:ov...@fateknollogee.com>> het volgende geschreven: > >> For some weird reason, I don't see my original comments on the >> list.ovirt forum pages. >> Here it is: >> >> Back in June of 2018, I posted regarding Agentless backup solutions. >> Greg Sheremeta replied & mentioned Trilio. >> >> The rest of the story...well just read on... >> >> These guys at Trilio have turned out to be a complete waste of time. >> (I could use some more colorful language) >> >> After my post & reply from Greg Sheremeta, I followed up with Trilio. >> A lot of promises/dates were made (by Trilio) as to when a beta would >> be made available for testing. >> Needless to say, they never came through. >> Finally in Dec 2018, they said we are ready for the demo, we will >> show you a working product. >> The day came, Trilio said, sorry it's too close to Xmas, we will >> postpone the demo's till 2019. >> In 2019, I continued to follow up & finally they set a date for >> another demo - Jan 29. >> On Jan. 29, we get on the Webex, they said, sorry the demo just broke >> 10 mins prior to our call, so no demo. >> They show me some screenshots & their OpenStack version & again >> promise to get me beta software in a few days. >> I continue to follow up (via email) >> >> Yesterday (Feb 6), I get an email from Thomas Lahive GM; Sales and >> Alliance Partners(copied & pasted below): >> "We started RHV betas and decided to prioritize current Trilio >> customers (those that purchased Triliovault for Openstack). >> If you would like to be part of the beta now then We can sign you up >> as a certified Trilio reseller which has a $7,500 Starter Fee. The >> $7,500 will be credited against your first customer order that is at >> least $7,500 so it will eventually cost you nothing. Many of our >> partners can apply the fee against revenue so it's a great tax >> incentive, but you can confirm with your finance department. >> Please Lmk how you would like to proceed." >> >> Please remember, I have never seen a working demo of this product, never. >> >> Is this typical behavior of RH partners? >> >> On Feb 7 2019, at 9:05 pm, Strahil > <mailto:hunter86...@yahoo.com>> wrote: >> >> Hey Femi, >> >> Just run away ... For me it seems, that they don't have that >> software ready for ovirt. >> >> Best Regards, >> Strahil Nikolov >> ___ >> Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> >> To unsubscribe send an email to users-le...@ovirt.org >> <mailto:users-le...@ovirt.org> >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/UZZCFDJYQLPYGYTCVC5V2HUNADOULWSX/ >> >> ___ >> Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> >> To unsubscribe send an email to users-le...@ovirt.org >> <mailto:users-le...@ovirt.org> >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/PAG3ODCH3OKRUYA3HCQLIME2BWV4DT73/ > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TJDOJGS3UKXFNKIJ6H4BAYPBOKWWZIQG/ Met vriendelijke groet, With kind regards, Jorick Astrego Netb
[ovirt-users] "Volume Option cluster.granular-entry-heal=enable could not be set" when using "Optimize for Virt store"
Hi again, When using the option "Optimize for Virt store", I get the following error: 2019-02-06 10:25:02,353+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-15727) [051cfc8c-9efc-427c-9e2e-9127e3e0a86d] EVENT_ID: GLUSTER_VOLUME_OPTION_SET_FAILED(4,003), Volume Option cluster.granular-entry-heal=enable could not be set on ssd9 of cluster GlusterFS-storage. This looks like the same issue as https://bugzilla.redhat.com/show_bug.cgi?id=1635684 Volume set option 'granular-entry-heal' is not longer set via gluster volume set option. Is this a known issue or should I open a bug for this? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HYEJJPEJISYSQCQLPT45AUAHEOKWBKN5/
[ovirt-users] Re: But in the web interface?
Hi, Reported it already: https://bugzilla.redhat.com/show_bug.cgi?id=1665430 Regards, Jorick Astrego On 2/5/19 10:25 AM, Hetz Ben Hamo wrote: > Hi, > > I upgraded to 4.3 and on the hosted engine web interface, I see the > "dashboard" button twice, one below the other. > > How can I fix it or is it a known bug? > > Thanks > Hetz > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/JZAMX5B2GLLITIDGW24B5GY6UQI7D5QO/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UFFNGNQEHNJHX4MYEJIJF6KSRLJNWBLZ/
[ovirt-users] Profile selection in VM portal for users
Hi, Wish I was @FOSDEM :'( Next year... When accessing the selfservice VM portal for users we wish to disable/hide our admin management realm. Is there currently a way to do this? We are maybe a bit paranoid but informatie leakage can bite you in the ass. We want to hookup Keycloak for the user portal and use the current ipa authentication for the admins only Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/53HSD2WUAK6GGSWCDDZ6SO7FOEBIY267/
[ovirt-users] Re: 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng
Hi, I know people are busy but do we have any progress on this, I removed the OVS cluster and recreated it with bridge networking. But I'm still stuck on the "failed to fetch volume file" and am unable to activate the hosts to continue testing... Anything else I can try to debug? The storage network is ip based without dns. Regards, Jorick On 1/25/19 3:53 PM, Jorick Astrego wrote: > > > On 1/25/19 3:26 PM, Sahina Bose wrote: >> >> >> On Fri, Jan 25, 2019 at 7:36 PM Jorick Astrego > <mailto:jor...@netbulae.eu>> wrote: >> >>> >>> The mount failure is probably related to glusterfs. There are >>> glusterfs logs on the host that >>> can give more info on this error. >> Oh duh, sorry forgot to check :-& >> >> "failed to fetch volume file" >> >> >> [2019-01-25 14:02:45.067440] I >> [glusterfsd-mgmt.c:2424:mgmt_rpc_notify] 0-glusterfsd-mgmt: >> disconnected from remote-host: *.*.*.* >> >> Are you able to access this host, and the gluster ports open? >> Anything in the glusterd.log of the gluster server? >> >> Adding Sanju to help > > > From the host: > > Telnet *.*.*.14 24007 > Trying *.*.*.14... > Connected to *.*.*.14. > Escape character is '^]'. > > glusterd.log on *.*.*.14: > > Chain INPUT (policy ACCEPT) > target prot opt source destination > ACCEPT all -- anywhere anywhere > state RELATED,ESTABLISHED > ACCEPT icmp -- anywhere anywhere > ACCEPT all -- anywhere anywhere > ACCEPT tcp -- anywhere anywhere tcp > dpt:54321 > ACCEPT tcp -- anywhere anywhere tcp > dpt:54322 > ACCEPT tcp -- anywhere anywhere tcp > dpt:sunrpc > ACCEPT udp -- anywhere anywhere udp > dpt:sunrpc > ACCEPT tcp -- anywhere anywhere tcp > dpt:ssh > ACCEPT udp -- anywhere anywhere udp > dpt:snmp > ACCEPT tcp -- anywhere anywhere tcp > dpt:websm > ACCEPT tcp -- anywhere anywhere tcp > dpt:24007 > ACCEPT tcp -- anywhere anywhere tcp > dpt:webcache > ACCEPT tcp -- anywhere anywhere tcp > dpt:38465 > ACCEPT tcp -- anywhere anywhere tcp > dpt:38466 > ACCEPT tcp -- anywhere anywhere tcp > dpt:38467 > ACCEPT tcp -- anywhere anywhere tcp > dpt:nfs > ACCEPT tcp -- anywhere anywhere tcp > dpt:38469 > ACCEPT tcp -- anywhere anywhere tcp > dpt:5666 > ACCEPT tcp -- anywhere anywhere tcp > dpt:39543 > ACCEPT tcp -- anywhere anywhere tcp > dpt:55863 > ACCEPT tcp -- anywhere anywhere tcp > dpt:38468 > ACCEPT udp -- anywhere anywhere udp > dpt:963 > ACCEPT tcp -- anywhere anywhere tcp > dpt:965 > ACCEPT tcp -- anywhere anywhere tcp > dpt:ctdb > ACCEPT tcp -- anywhere anywhere tcp > dpt:netbios-ssn > ACCEPT tcp -- anywhere anywhere tcp > dpt:microsoft-ds > ACCEPT tcp -- anywhere anywhere tcp > dpts:24009:24108 > ACCEPT tcp -- anywhere anywhere tcp > dpts:49152:49251 > ACCEPT tcp -- anywhere anywhere tcp > dpts:49217:49316 > ACCEPT tcp -- anywhere anywhere tcp > dpt:zabbix-agent /* Zabbix agent */ > REJECT all -- anywhere anywhere > reject-with icmp-host-prohibited > > Chain FORWARD (policy ACCEPT) > target prot opt source destination > REJECT all -- anywhere anywhere > PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited > > Chain OUTPUT (policy ACCEPT) > target prot opt source destination > > And in the glusterd.log has nothing else but: > > [2019-01-25 11:02:32.617694] I [MSGID: 10
[ovirt-users] Re: Open_vSwitch no key error after upgrading to 4.2.8
To add to that, I removed the nodes and reinstalled without OVS so it's weird it still complains about it. Regards, Jorick On 1/29/19 12:40 AM, Jorick Astrego wrote: > > Noticed this one too on 4.3.0 rc2, didn't have time to check it out > though. > > Today I saw it after I removed an OVS cluster and recreated the > cluster with "legacy" bridge networking. > > Regards, > > Jorick Astrego > > Netbulae > > > On 1/28/19 2:34 PM, Jayme wrote: >> I upgraded oVirt to 4.2.8 and now I am spammed with the following >> message in all host syslog. How can I stop/fix this error? >> >> ovs-vsctl: ovs|1|db_ctl_base|ERR|no key >> "odl_os_hostconfig_hostid" in Open_vSwitch record "." column external_ids >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/OH2VH3AYBRCNVM24PTP34OTS5ISYLUAD/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/EDN2E2QDM3H4IEHNOBZV6A64XEHLYTJJ/
[ovirt-users] Re: Open_vSwitch no key error after upgrading to 4.2.8
Noticed this one too on 4.3.0 rc2, didn't have time to check it out though. Today I saw it after I removed an OVS cluster and recreated the cluster with "legacy" bridge networking. Regards, Jorick Astrego Netbulae On 1/28/19 2:34 PM, Jayme wrote: > I upgraded oVirt to 4.2.8 and now I am spammed with the following > message in all host syslog. How can I stop/fix this error? > > ovs-vsctl: ovs|1|db_ctl_base|ERR|no key "odl_os_hostconfig_hostid" > in Open_vSwitch record "." column external_ids > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/OH2VH3AYBRCNVM24PTP34OTS5ISYLUAD/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ASUGIXCS5W5YKHUTNFUZSJT2S6SZW5A4/
[ovirt-users] Re: 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng
On 1/25/19 3:26 PM, Sahina Bose wrote: > > > On Fri, Jan 25, 2019 at 7:36 PM Jorick Astrego <mailto:jor...@netbulae.eu>> wrote: > >> >> The mount failure is probably related to glusterfs. There are >> glusterfs logs on the host that >> can give more info on this error. > Oh duh, sorry forgot to check :-& > > "failed to fetch volume file" > > > [2019-01-25 14:02:45.067440] I > [glusterfsd-mgmt.c:2424:mgmt_rpc_notify] 0-glusterfsd-mgmt: > disconnected from remote-host: *.*.*.* > > Are you able to access this host, and the gluster ports open? > Anything in the glusterd.log of the gluster server? > > Adding Sanju to help >From the host: Telnet *.*.*.14 24007 Trying *.*.*.14... Connected to *.*.*.14. Escape character is '^]'. glusterd.log on *.*.*.14: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:54321 ACCEPT tcp -- anywhere anywhere tcp dpt:54322 ACCEPT tcp -- anywhere anywhere tcp dpt:sunrpc ACCEPT udp -- anywhere anywhere udp dpt:sunrpc ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT udp -- anywhere anywhere udp dpt:snmp ACCEPT tcp -- anywhere anywhere tcp dpt:websm ACCEPT tcp -- anywhere anywhere tcp dpt:24007 ACCEPT tcp -- anywhere anywhere tcp dpt:webcache ACCEPT tcp -- anywhere anywhere tcp dpt:38465 ACCEPT tcp -- anywhere anywhere tcp dpt:38466 ACCEPT tcp -- anywhere anywhere tcp dpt:38467 ACCEPT tcp -- anywhere anywhere tcp dpt:nfs ACCEPT tcp -- anywhere anywhere tcp dpt:38469 ACCEPT tcp -- anywhere anywhere tcp dpt:5666 ACCEPT tcp -- anywhere anywhere tcp dpt:39543 ACCEPT tcp -- anywhere anywhere tcp dpt:55863 ACCEPT tcp -- anywhere anywhere tcp dpt:38468 ACCEPT udp -- anywhere anywhere udp dpt:963 ACCEPT tcp -- anywhere anywhere tcp dpt:965 ACCEPT tcp -- anywhere anywhere tcp dpt:ctdb ACCEPT tcp -- anywhere anywhere tcp dpt:netbios-ssn ACCEPT tcp -- anywhere anywhere tcp dpt:microsoft-ds ACCEPT tcp -- anywhere anywhere tcp dpts:24009:24108 ACCEPT tcp -- anywhere anywhere tcp dpts:49152:49251 ACCEPT tcp -- anywhere anywhere tcp dpts:49217:49316 ACCEPT tcp -- anywhere anywhere tcp dpt:zabbix-agent /* Zabbix agent */ REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination And in the glusterd.log has nothing else but: [2019-01-25 11:02:32.617694] I [MSGID: 106499] [glusterd-handler.c:4303:__glusterd_handle_status_volume] 0-management: Received status volume req for volume ssd6 [2019-01-25 11:02:32.623892] I [MSGID: 106499] [glusterd-handler.c:4303:__glusterd_handle_status_volume] 0-management: Received status volume req for volume ssd9 [2019-01-25 11:03:31.847006] I [MSGID: 106488] [glusterd-handler.c:1548:__glusterd_handle_cli_get_volume] 0-management: Received get vol req [2019-01-25 11:04:33.023685] I [MSGID: 106499] [glusterd-handler.c:4303:__glusterd_handle_status_volume] 0-management: Received status volume req for volume hdd2 [2019-01-25 11:04:33.030549] I [MSGID: 106499] [glusterd-handler.c:4303:__glusterd_handle_status_volume] 0-management: Received status volume req for volume sdd8 [2019-01-25 11:04:33.037024] I [MSGID: 106499] [glusterd-handler.c:4303:__glusterd_handle_status_vo
[ovirt-users] Re: 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng
> > The mount failure is probably related to glusterfs. There are > glusterfs logs on the host that > can give more info on this error. Oh duh, sorry forgot to check :-& "failed to fetch volume file" [2019-01-25 13:47:03.560677] I [MSGID: 100030] [glusterfsd.c:2691:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 5.2 (args: /usr/sbin/glusterfs --process-name fuse --volfile-server=*.*.*.* --volfile-server=*.*.*.* --volfile-server=*.*.*.* --volfile-id=ssd5 /rhev/data-center/mnt/glusterSD/*.*.*.*:ssd5) [2019-01-25 13:47:03.571819] I [MSGID: 101190] [event-epoll.c:622:event_dispatch_epoll_worker] 0-epoll: Started thread with index 1 [2019-01-25 14:02:45.067440] I [glusterfsd-mgmt.c:2424:mgmt_rpc_notify] 0-glusterfsd-mgmt: disconnected from remote-host: *.*.*.* [2019-01-25 14:02:45.067500] I [glusterfsd-mgmt.c:2464:mgmt_rpc_notify] 0-glusterfsd-mgmt: connecting to next volfile server *.*.*.* [2019-01-25 14:02:45.069678] E [rpc-clnt.c:346:saved_frames_unwind] (--> /lib64/libglusterfs.so.0(_gf_log_callingfn+0x13b)[0x7f2b0b7f4f1b] (--> /lib64/libgfrpc.so.0(+0xce11)[0x7f2b0b5bde11] (--> /lib64/libgfrpc.so.0(+0xcf2e)[0x7f2b0b5bdf2e] (--> /lib64/libgfrpc.so.0(rpc_clnt_connection_cleanup+0x91)[0x7f2b0b5bf531] (--> /lib64/libgfrpc.so.0(+0xf0d8)[0x7f2b0b5c00d8] ) 0-glusterfs: forced unwinding frame type(GlusterFS Handshake) op(GETSPEC(2)) called at 2019-01-25 13:47:03.572632 (xid=0x2) [2019-01-25 14:02:45.069697] E [glusterfsd-mgmt.c:2136:mgmt_getspec_cbk] 0-mgmt: failed to fetch volume file (key:ssd5) [2019-01-25 14:02:45.069725] W [glusterfsd.c:1481:cleanup_and_exit] (-->/lib64/libgfrpc.so.0(+0xce32) [0x7f2b0b5bde32] -->/usr/sbin/glusterfs(mgmt_getspec_cbk+0x841) [0x5651101b7231] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x5651101afbbb] ) 0-: received signum (0), shutting down [2019-01-25 14:02:45.069749] I [fuse-bridge.c:5897:fini] 0-fuse: Unmounting '/rhev/data-center/mnt/glusterSD/*.*.*.*:ssd5'. [2019-01-25 14:02:45.078949] I [fuse-bridge.c:5902:fini] 0-fuse: Closing fuse connection to '/rhev/data-center/mnt/glusterSD/*.*.*.*:ssd5'. [2019-01-25 14:02:45.079035] W [glusterfsd.c:1481:cleanup_and_exit] (-->/lib64/libpthread.so.0(+0x7dd5) [0x7f2b0a656dd5] -->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x5651101afd45] -->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x5651101afbbb] ) 0-: received signum (15), shutting down On 1/25/19 2:55 PM, Nir Soffer wrote: > On Fri, Jan 25, 2019 at 3:18 PM Jorick Astrego <mailto:jor...@netbulae.eu>> wrote: > > Hi, > > We're having problems mounting the preexisting 3.12 glusterfs > storage domains in ovirt node ng 4.3.0 rc2. > > Getting > > There are no iptables blocks on the storage network, the ip's are > pingable bothe ways. I can telnet to the glusterfs ports and I see > no messages in the logs of the glusterfs servers. > > When I try the mount command manually it hangs for ever: > > /usr/bin/mount -t glusterfs -o > backup-volfile-servers=*.*.*.*:*.*.*.* *.*.*.*:/sdd8 /mnt/temp > > I haven't submitted a bug yet > > from supervdsm.log > > MainProcess|jsonrpc/2::DEBUG::2019-01-25 > 13:42:45,282::supervdsm_server::100::SuperVdsm.ServerCallback::(wrapper) > call volumeInfo with (u'sdd8', u'*.*.*.*') {} > MainProcess|jsonrpc/2::DEBUG::2019-01-25 > 13:42:45,282::commands::198::root::(execCmd) /usr/bin/taskset > --cpu-list 0-63 /usr/sbin/gluster --mode=script volume info > --remote-host=*.*.*.* sdd8 --xml (cwd None) > MainProcess|jsonrpc/2::DEBUG::2019-01-25 > 13:44:45,399::commands::219::root::(execCmd) FAILED: = ''; > = 1 > MainProcess|jsonrpc/2::DEBUG::2019-01-25 > 13:44:45,399::logutils::319::root::(_report_stats) ThreadedHandler > is ok in the last 120 seconds (max pending: 2) > > > This looks like > https://bugzilla.redhat.com/show_bug.cgi?id=1666123#c18 > > We should see "ThreadedHandler is ok" every 60 seconds when using > debug log level. > > Looks like your entire supervdsmd process was hang for 120 seconds. > > > MainProcess|jsonrpc/2::ERROR::2019-01-25 > 13:44:45,399::supervdsm_server::104::SuperVdsm.ServerCallback::(wrapper) > Error in volumeInfo > Traceback (most recent call last): > File > "/usr/lib/python2.7/site-packages/vdsm/supervdsm_server.py", line > 102, in wrapper > res = func(*args, **kwargs) > File "/usr/lib/python2.7/site-packages/vdsm/gluster/cli.py", > line 529, in volumeInfo > xmltree = _execGlusterXml(command) > File "/usr/lib/python2.7/site-packages/vdsm/gluster/cli.py", > line 131, in _execGlusterXml > return _getTree(rc, out, err) > F
[ovirt-users] 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng
/site-packages/yajsonrpc/__init__.py", line 262, in __call__ self._handler(self._ctx, self._req) File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 305, in _serveRequest response = self._handle_request(req, ctx) File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 345, in _handle_request res = method(**params) File: "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 194, in _dynamicMethod result = fn(*methodArgs) File: "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1103, in connectStorageServer connectionParams) File: "/usr/lib/python2.7/site-packages/vdsm/storage/dispatcher.py", line 72, in wrapper result = ctask.prepare(func, *args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 108, in wrapper return m(self, *a, **kw) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 1179, in prepare result = self._run(func, *args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run return fn(*args, **kargs) File: "", line 2, in connectStorageServer File: "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method ret = func(*args, **kwargs) File: "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2410, in connectStorageServer conObj.connect() from messages: Jan 25 13:49:07 node9 vdsm[31968]: WARN Worker blocked: timeout=60, duration=840.00 at 0x7f9be82ffa50> task#=93 at 0x7f9be83bba10>, traceback:#012File: "/usr/lib64/python2.7/threading.py", line 785, in __bootstrap#012 self.__bootstrap_inner()#012File: "/usr/lib64/python2.7/threading.py", line 812, in __bootstrap_inner#012 self.run()#012File: "/usr/lib64/python2.7/threading.py", line 765, in run#012 self.__target(*self.__args, **self.__kwargs)#012File: "/usr/lib/python2.7/site-packages/vdsm/common/concurrent.py", line 195, in run#012 ret = func(*args, **kwargs)#012File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 301, in _run#012 self._execute_task()#012File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 315, in _execute_task#012 task()#012File: "/usr/lib/python2.7/site-packages/vdsm/executor.py", line 391, in __call__#012 self._callable()#012File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 262, in __call__#012 self._handler(self._ctx, self._req)#012File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 305, in _serveRequest#012 response = self._handle_request(req, ctx)#012File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 345, in _handle_request#012 res = method(**params)#012File: "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 194, in _dynamicMethod#012 result = fn(*methodArgs)#012File: "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1103, in connectStorageServer#012 connectionParams)#012File: "/usr/lib/python2.7/site-packages/vdsm/storage/dispatcher.py", line 72, in wrapper#012 result = ctask.prepare(func, *args, **kwargs)#012File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 108, in wrapper#012 return m(self, *a, **kw)#012File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 1179, in prepare#012 result = self._run(func, *args, **kwargs)#012File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in _run#012 return fn(*args, **kargs)#012File: "", line 2, in connectStorageServer#012File: "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method#012 ret = func(*args, **kwargs)#012File: "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2410, in connectStorageServer#012 conObj.connect()#012File: "/usr/lib/python2.7/site-packages/vdsm/storage/storageServer.py", line 172, in connect#012 self._mount.mount(self.options, self._vfsType, cgroup=self.CGROUP)#012File: "/usr/lib/python2.7/site-packages/vdsm/storage/mount.py", line 207, in mount#012 cgroup=cgroup)#012File: "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 56, in __call__#012 return callMethod()#012File: "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 54, in #012 **kwargs)#012File: "", line 2, in mount#012File: "/usr/lib64/python2.7/multiprocessing/managers.py", line 759, in _callmethod#012 kind, result = conn.recv() Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UEFI2DXVP4D4B4J5WN2DL5SBSZSIOHFD/
[ovirt-users] Re: [ANN] oVirt 4.3.0 Third Release Candidate is now available for testing
Hi Sandro, Is there a list with the changes/fixes from rc1 > rc2 > rc3? Regards, Jorick Astrego On 1/24/19 2:10 PM, Sandro Bonazzola wrote: > > The oVirt Project is pleased to announce the availability of the Third > Release Candidate of oVirt 4.3.0, as of January 24th, 2018 > > > This is pre-release software. This pre-release should not to be used > in production. > > > Please take a look at our community page[1] to learn how to ask > questions and interact with developers and users. > > All issues or bugs should be reported via oVirt Bugzilla[2]. > > > This update is the first release candidate of the 4.3.0 version. > > This release brings more than 130 enhancements and more than 450 bug > fixes on top of oVirt 4.2 series. > > > What's new in oVirt 4.3.0? > > * Q35 chipset, support booting using UEFI and Secure Boot > > * Skylake-server and AMD EPYC support > > * New smbus driver in windows guest tools > > * Improved support for v2v > > * OVA export / import of Templates > > * Full support for live migration of High Performance VMs > > * Microsoft Failover clustering support (SCSI Persistent Reservation) > for Direct LUN disks > > * Hundreds of bug fixes on top of oVirt 4.2 series > > * New VM portal details page (see a preview here: > https://imgur.com/a/ExINpci) > > * New Cluster upgrade UI > > * OVN security groups > > * IPv6 (static host addresses) > > * Support of Neutron from RDO OpenStack 13 as external network provider > > * Support of using Skydive from RDO OpenStack 14 as Tech Preview > > * Support for 3.6 and 4.0 data centers, clusters and hosts were removed > > * Now using PostgreSQL 10 > > * New metrics support using rsyslog instead of fluentd > > > > This release is available now on x86_64 architecture for: > > * Red Hat Enterprise Linux 7.6 or later > > * CentOS Linux (or similar) 7.6 or later > > > > This release supports Hypervisor Hosts on x86_64 and ppc64le > architectures for: > > * Red Hat Enterprise Linux 7.6 or later > > * CentOS Linux (or similar) 7.6 or later > > * oVirt Node 4.3 (available for x86_64 only) > > > Experimental tech preview for x86_64 and s390x architectures for > Fedora 28 is also included. > > > See the release notes draft [3] for installation / upgrade > instructions and a list of new features and bugs fixed. > > > Notes: > > - oVirt Appliance is already available for both CentOS 7 and Fedora 28 > (tech preview). > > - oVirt Node NG is already available for CentOS 7 > > - oVirt Node NG for Fedora 28 (tech preview) is being delayed due to > build issues with the build system. > > > Additional Resources: > > * Read more about the oVirt 4.3.0 release highlights: > http://www.ovirt.org/release/4.3.0/ > > * Get more oVirt project updates on Twitter: https://twitter.com/ovirt > > * Check out the latest project news on the oVirt blog: > http://www.ovirt.org/blog/ > > > > [1] https://www.ovirt.org/community/ > > [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt > > [3] http://www.ovirt.org/release/4.3.0/ > > [4] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ > > > > -- > > SANDRO BONAZZOLA > > MANAGER, SOFTWARE ENGINEERING, EMEA R RHV > > Red Hat EMEA <https://www.redhat.com/> > > sbona...@redhat.com <mailto:sbona...@redhat.com> > > <https://red.ht/sig> > > > _______ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/CFX4K7K6WTVVVQJHP2XAAZQYSNMOFXYI/ Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VTG2COKN2TOW23ZKYFW3K2AWNRFYPMYS/
[ovirt-users] Re: ovirtmgmt always out of sync on ovirt node
On 1/18/19 11:12 AM, Sandro Bonazzola wrote: > > > Il giorno ven 18 gen 2019 alle ore 10:05 Jorick Astrego > mailto:jor...@netbulae.eu>> ha scritto: > > Hi, > > We're switching from Centos 7 hosts to oVirt node ng (tried 4.2.7, > 4.3rc1 and 4.3rc2) and after adding them to oVirt (currently on > 4.3rc2) the ovirtmgmt interface is always out of sync. > > Tried synching the network and refresh capabilities. I also tried > removing ovirtmgmt from the interface and adding it to a bond, > then I get this error: > > Cannot setup Networks. The following Network definitions on > the Network Interface are different than those on the Logical > Network. Please synchronize the Network Interface before > editing network ovirtmgmt. The non-synchronized values are: > ${OUTAVERAGELINKSHARE} ${HOST_OUT_OF_SYNC} - null, > ${DC_OUT_OF_SYNC} - 50 > > I can setup the bond at install so the ovirtmgmt will use it so I > can use the host, but I'm hesitant to do this in production as I > cannot change the interface anymore. > > > Thanks for the report Jorick, adding some people for investigating on > this issue. > Did you open a bug to track this? If I understood correctly this > affects ovirt-engine from 4.3.0 rc2 with ovirt-node-ng both from > stable 4.2.7 and from pre release rc1 and rc2 right? Yep, BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1667411 > Did you see same issue with engine 4.2.7 and node-ng 4.2.7? If not, > seems to be a regression in ovirt-engine. > > Sorry didn't try, I had already upgraded the engine. Will see if I can reproduce on the older version. > > > Regards, > > Jorick Astrego > > > > > > Met vriendelijke groet, With kind regards, > > Jorick Astrego > * > Netbulae Virtualization Experts * > > Tel: 053 20 30 270i...@netbulae.eu <mailto:i...@netbulae.eu> > Staalsteden 4-3A KvK 08198180 > Fax: 053 20 30 271www.netbulae.eu <http://www.netbulae.eu> > 7547 > TA Enschede BTW NL821234584B01 > > > > > ___ > Users mailing list -- users@ovirt.org <mailto:users@ovirt.org> > To unsubscribe send an email to users-le...@ovirt.org > <mailto:users-le...@ovirt.org> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4SMWRA4DDA5P3DO5NAKPRUWK42QZVGJ/ > > > > -- > > SANDRO BONAZZOLA > > MANAGER, SOFTWARE ENGINEERING, EMEA R RHV > > Red Hat EMEA <https://www.redhat.com/> > > sbona...@redhat.com <mailto:sbona...@redhat.com> > > <https://red.ht/sig> > Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KRAMOKD2XKZ2RSGK2JUSYP63PHITUXE7/
[ovirt-users] Re: ovirt node ng 4.3.0 rc1 upgrade fails
On 1/18/19 11:23 AM, Sandro Bonazzola wrote: > > > Il giorno ven 18 gen 2019 alle ore 11:23 Sandro Bonazzola > mailto:sbona...@redhat.com>> ha scritto: > > > > Il giorno ven 11 gen 2019 alle ore 14:41 Jorick Astrego > mailto:jor...@netbulae.eu>> ha scritto: > > Hi, > > Trying to update oVirt Node 4.2.7.1 to 4.3.0, but it fails > with the following dependencies: > > > thanks Jorick for the report! looks like the disabling of the > repos and the filtering on the node upgrade package is broken. > We'll investigate on this. > > > Did you open a BZ about this? I can see the standard repos (base, updates) are not enabled. Created the BZ now: https://bugzilla.redhat.com/show_bug.cgi?id=1667403 Also created one for rc1 to rc2: https://bugzilla.redhat.com/show_bug.cgi?id=1667406 > > > > > > > "Loaded plugins: enabled_repos_upload, > fastestmirror, imgbased-persist,\n : > package_upload, product-id, search-disabled-repos, > subscription-\n : manager, vdsmupgrade\nThis > system is not registered with an entitlement server. You > can use subscription-manager to register.\nLoading mirror > speeds from cached hostfile\n * ovirt-4.3-epel: > ftp.nluug.nl\nResolving <ftp://ftp.nluug.nl%5CnResolving> > Dependencies\n--> Running transaction check\n---> Package > ovirt-host.x86_64 0:4.2.3-1.el7 will be updated\n---> > Package ovirt-host.x86_64 0:4.3.0-1.el7 will be an > update\n--> Processing Dependency: ovirt-host-dependencies > = 4.3.0-1.el7 for package: > ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: > aide for package: ovirt-host-4.3.0-1.el7.x86_64\n--> > Processing Dependency: openscap for package: > ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: > openscap-utils for package: > ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: > pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> > Processing Dependency: scap-security-guide for package: > ovirt-host-4.3.0-1.el7.x86_64\n--> Running transaction > check\n---> Package ovirt-host.x86_64 0:4.3.0-1.el7 will > be an update\n--> Processing Dependency: aide for package: > ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: > openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n--> > Processing Dependency: openscap-utils for package: > ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: > pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> > Processing Dependency: scap-security-guide for package: > ovirt-host-4.3.0-1.el7.x86_64\n---> Package > ovirt-host-dependencies.x86_64 0:4.2.3-1.el7 will be > updated\n---> Package ovirt-host-dependencies.x86_64 > 0:4.3.0-1.el7 will be an update\n--> Processing > Dependency: vdsm >= 4.30.5 for package: > ovirt-host-dependencies-4.3.0-1.el7.x86_64\n--> Processing > Dependency: vdsm-client >= 4.30.5 for package: > ovirt-host-dependencies-4.3.0-1.el7.x86_64\n--> Running > transaction check\n---> Package ovirt-host.x86_64 > 0:4.3.0-1.el7 will be an update\n--> Processing > Dependency: aide for package: > ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: > openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n--> > Processing Dependency: openscap-utils for package: > ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency: > pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n--> > Processing Dependency: scap-security-guide for package: > ovirt-host-4.3.0-1.el7.x86_64\n---> Package vdsm.x86_64 > 0:4.20.43-1.el7 will be updated\n--> Processing > Dependency: vdsm = 4.20.43-1.el7 for package: > vdsm-hook-ethtool-options-4.20.43-1.el7.noarch\n--> > Processing Dependency: vdsm = 4.20.43-1.el7 for package: > vdsm-gluster-4.20.43-1.el7.x86_64\n--> Processing > Dependency: vdsm = 4.20.43-1.el7 for package: > vdsm-hook-vmfex-dev-4.20.43-1.el7.noarch\n--> Processing > Dependency: vdsm = 4.20.43-1.el7 for package: > vdsm-hook-fcoe-4.20.43-1.el7.noarch\n-
[ovirt-users] ovirtmgmt always out of sync on ovirt node
Hi, We're switching from Centos 7 hosts to oVirt node ng (tried 4.2.7, 4.3rc1 and 4.3rc2) and after adding them to oVirt (currently on 4.3rc2) the ovirtmgmt interface is always out of sync. Tried synching the network and refresh capabilities. I also tried removing ovirtmgmt from the interface and adding it to a bond, then I get this error: Cannot setup Networks. The following Network definitions on the Network Interface are different than those on the Logical Network. Please synchronize the Network Interface before editing network ovirtmgmt. The non-synchronized values are: ${OUTAVERAGELINKSHARE} ${HOST_OUT_OF_SYNC} - null, ${DC_OUT_OF_SYNC} - 50 I can setup the bond at install so the ovirtmgmt will use it so I can use the host, but I'm hesitant to do this in production as I cannot change the interface anymore. Regards, Jorick Astrego Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4SMWRA4DDA5P3DO5NAKPRUWK42QZVGJ/
[ovirt-users] ovirt node ng 4.3.0 rc1 upgrade fails
Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: openscap Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: pam_pkcs11 Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: aide Error: Package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64 (ovirt-4.3-centos-qemu-ev) Requires: libepoxy.so.0()(64bit) Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre) Requires: scap-security-guide Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2PZ5DUKSTBFI3KT4EHKYBOZZUBFJ6PYP/
Re: [ovirt-users] Ovirt 4.0 and EL 7.4
Fixed it by downgrading libvirt, I had the libvirt latest repo "http://mirror.centos.org/centos-7/7.3.1611/virt/x86_64/libvirt-latest/; configured on our Katello Working packages: libvirt-daemon-driver-network-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-config-nwfilter-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-driver-nodedev-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-driver-nwfilter-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-driver-qemu-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-driver-lxc-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-driver-interface-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-driver-secret-2.0.0-10.el7_3.9.x86_64 libvirt-lock-sanlock-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-kvm-2.0.0-10.el7_3.9.x86_64 libvirt-client-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-driver-storage-2.0.0-10.el7_3.9.x86_64 libvirt-daemon-config-network-2.0.0-10.el7_3.9.x86_64 libvirt-2.0.0-10.el7_3.9.x86_64 libvirt-python-2.0.0-2.el7.x86_64 On 10/10/2017 07:41 PM, Jorick Astrego wrote: > > Hi, > > I've redeployed a node with 7.3 to fix this issue but got the same > errors with ovirt 4.0. > > MainThread::DEBUG::2017-10-10 > 18:30:30,945::upgrade::90::upgrade::(apply_upgrade) Running > upgrade upgrade-unified-persistence > MainThread::DEBUG::2017-10-10 > 18:30:30,951::libvirtconnection::160::root::(get) trying to > connect libvirt > MainThread::ERROR::2017-10-10 > 18:30:41,125::upgrade::94::upgrade::(apply_upgrade) Failed to run > upgrade-unified-persistence > Traceback (most recent call last): > File "/usr/lib/python2.7/site-packages/vdsm/tool/upgrade.py", > line 92, in apply_upgrade > upgrade.run(ns, args) > File > "/usr/lib/python2.7/site-packages/vdsm/tool/unified_persistence.py", > line 195, in run > run() > File > "/usr/lib/python2.7/site-packages/vdsm/tool/unified_persistence.py", > line 46, in run > networks, bondings = _getNetInfo() > File > "/usr/lib/python2.7/site-packages/vdsm/tool/unified_persistence.py", > line 132, in _getNetInfo > netinfo = NetInfo(netswitch.netinfo()) > File > "/usr/lib/python2.7/site-packages/vdsm/network/netswitch.py", line > 298, in netinfo > _netinfo = netinfo_get(compatibility=compatibility) > File > "/usr/lib/python2.7/site-packages/vdsm/network/netinfo/cache.py", > line 109, in get > return _get(vdsmnets) > File > "/usr/lib/python2.7/site-packages/vdsm/network/netinfo/cache.py", > line 70, in _get > libvirt_nets = libvirt.networks() > File "/usr/lib/python2.7/site-packages/vdsm/network/libvirt.py", > line 113, in networks > conn = libvirtconnection.get() > File > "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line > 163, in get > password) > File > "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line > 99, in open_connection > return utils.retry(libvirtOpen, timeout=10, sleep=0.2) > File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 547, > in retry > return func() > File "/usr/lib64/python2.7/site-packages/libvirt.py", line 105, > in openAuth > if ret is None:raise libvirtError('virConnectOpenAuth() failed') > libvirtError: authentication failed: authentication failed > > > Oct 10 19:35:55 host1 sasldblistusers2: _sasldb_getkeyhandle has > failed > > Oct 10 19:36:20 host1 libvirtd: 2017-10-10 17:36:20.002+: > 13660: error : virNetSASLSessionListMechanisms:390 : internal > error: cannot list SASL mechanisms -4 (SASL(-4): no mechanism > available: Internal Error -4 in server.c near line 1757) > Oct 10 19:36:20 host1 libvirtd: 2017-10-10 17:36:20.002+: > 13660: error : remoteDispatchAuthSaslInit:3411 : authentication > failed: authentication failed > Oct 10 19:36:20 host1 libvirtd: 2017-10-10 17:36:20.002+: > 13650: error : virNetSocketReadWire:1808 : End of file while > reading data: Input/output error > Oct 10 19:36:20 host1 vdsm-tool: libvirt: XML-RPC error : > authentication failed: authentication failed > Oct 10 19:36:20 host1 systemd: vdsm-network.service: control > process exited, code=exited status=1 > Oct 10 19:36:20 host1 systemd: Failed to start Virtual Desktop > Server Manager network restoration. > Oct 10 19:36:20 host1 systemd: Dependency failed for Virtual > Desktop Server Manager. > Oct 10 19:36:2
Re: [ovirt-users] Ovirt 4.0 and EL 7.4
river-storage-3.2.0-1.el7.x86_64 libvirt-daemon-driver-secret-3.2.0-1.el7.x86_64 libvirt-daemon-driver-interface-3.2.0-1.el7.x86_64 libvirt-daemon-kvm-3.2.0-1.el7.x86_64 libvirt-libs-3.2.0-1.el7.x86_64 libvirt-daemon-driver-storage-core-3.2.0-1.el7.x86_64 libvirt-daemon-driver-qemu-3.2.0-1.el7.x86_64 libvirt-daemon-config-nwfilter-3.2.0-1.el7.x86_64 libvirt-daemon-driver-storage-disk-3.2.0-1.el7.x86_64 libvirt-daemon-driver-storage-gluster-3.2.0-1.el7.x86_64 libvirt-lock-sanlock-3.2.0-1.el7.x86_64 libvirt-daemon-3.2.0-1.el7.x86_64 libvirt-daemon-driver-nwfilter-3.2.0-1.el7.x86_64 ovirt-imageio-common-0.4.0-1.el7.noarch ovirt-release40-4.0.6-2.el7.centos.noarch ovirt-vmconsole-1.0.4-1.el7.centos.noarch ovirt-imageio-daemon-0.4.0-1.el7.noarch ovirt-vmconsole-host-1.0.4-1.el7.centos.noarch Also tried with "mech_list: digest-md5" cat /etc/sasl2/libvirt.conf |grep mech_list #mech_list: gssapi mech_list: digest-md5 #mech_list: scram-sha-1 #mech_list: scram-sha-1 gssapi On 10/05/2017 01:26 PM, Pavel Gashev wrote: > Full /etc/sasl2/libvirt.conf: > mech_list: digest-md5 > sasldb_path: /etc/libvirt/passwd.db > > Also note that VDSM has to be patched to work on 7.4 with no issues. oVirt > 3.6 and 4.1 have required fixes, but oVirt 4.0 doesn’t. > > On 04/10/2017, 18:44, "users-boun...@ovirt.org on behalf of Alan Griffiths" > <users-boun...@ovirt.org on behalf of apgriffith...@gmail.com> wrote: > > That didn't seem to make any difference. > > I can make it work by disabling authentication > > auth_unix_rw="none" in /etc/libvirt/libvirtd.conf > > On 4 October 2017 at 15:05, VONDRA Alain <avon...@unicef.fr> wrote: > > Hi, > > Did you modify your /etc/sasl2/libvirt.conf, because the update has > modify the way to authenticate from md5 to gssapi. > > > > If not just change this line : > > mech_list: gssapi > > to > > mech_list: digest-md5 > > > > And restart services > > > > As mentioned in the libvirt.conf file : > > > > # NB, previously DIGEST-MD5 was set as the default mechanism for > > # libvirt. Per RFC 6331 this is vulnerable to many serious security > > # flaws and should no longer be used. Thus GSSAPI is now the default. > > # > > # To use GSSAPI requires that a libvirtd service principal is > > # added to the Kerberos server for each host running libvirtd. > > # This principal needs to be exported to the keytab file listed below > > > > Alain > > > > > > > > Alain VONDRA > > > > Chargé d'Exploitation et de Sécurité des Systèmes d'Information > > Direction Administrative et Financière > > +33 1 44 39 77 76 > > > > UNICEF France > > 3 rue Duguay Trouin 75006 > > PARIS > > www.unicef.fr > > -Message d'origine- > > De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la > part de Alan Griffiths > > Envoyé : mercredi 4 octobre 2017 15:50 > > À : Ovirt Users <users@ovirt.org> > > Objet : [ovirt-users] Ovirt 4.0 and EL 7.4 > > > > Hi, > > > > Is 4.0 supported/known to work on CentOS 7.4? > > > > I've just tried to upgrade one of the hosts in my lab from 7.3 to 7.4 > and now vdsm-network fails to start with > > > > vdsm-tool: libvirt: XML-RPC error : authentication failed: > authentication failed > > > > To even get this far I had to exclude gluster packages as 7.4 > introduces 3.8 but ovirt 4.0 repo is still on 3.7. > > > > So, more generally. If I'm on ovirt 4.0, gluster 3.7 and EL 7.3. What > is the best ordering for getting to ovirt 4.1 and EL 7.4? > > > > Thanks, > > > > Alan > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] problem installing/upgrading hosts after 3.6 to 4.0 update
Hi, After digging through the mailinglist I see more issues with ovirt 4.0 on Centos 7.4. So I'm now going to try redeploying the nodes with 7.3 and go from there as I experienced I first have to upgrade to 4.0 before upgrading to 4.1. A bit of a hassle, maybe put a notice to use Centos 7.3 in the upgrade guide? Regards, Jorick On 10/10/2017 11:43 AM, Jorick Astrego wrote: > > Hi, > > It was time to upgrade our ancient ovirt 3.6 to 4.0 (and then to 4.1), > but I'm having some issues in our test environment. > > After upgrading the engine, I try to reinstall a fresh provisioned > Centos 7.4 node but it fails on the vdsm service. > > When debugging I see in the log that the step "vdsm-tool configure" fails: > > 2017-10-10 10:59:21 DEBUG otopi.context context._executeMethod:128 > Stage closeup METHOD > otopi.plugins.ovirt_host_deploy.vdsm.packages.Plugin._reconfigure > 2017-10-10 10:59:21 DEBUG > otopi.plugins.ovirt_host_deploy.vdsm.packages > plugin.executeRaw:813 execute: ('/bin/vdsm-tool', 'configure', > '--force'), executable='None', cwd='None', env=None > 2017-10-10 10:59:21 DEBUG > otopi.plugins.ovirt_host_deploy.vdsm.packages > plugin.executeRaw:863 execute-result: ('/bin/vdsm-tool', > 'configure', '--force'), rc=1 > 2017-10-10 10:59:21 DEBUG > otopi.plugins.ovirt_host_deploy.vdsm.packages plugin.execute:921 > execute-output: ('/bin/vdsm-tool', 'configure', '--force') stdout: > Usage: /bin/vdsm-tool [options] [arguments] > Valid options: > -h, --help > Show this help menu. > -l, --logfile > Redirect logging to file. > -v, --verbose > > When I run it by hand, there is no action "configure" > > vdsm-tool -vvv configure > Usage: /usr/bin/vdsm-tool [options] [arguments] > Valid options: > -h, --help > Show this help menu. > -l, --logfile > Redirect logging to file. > -v, --verbose > Include warning (and errors) messages in log. > -vv, --vverbose > Include information (and above) messages in log. > -vvv, --vvverbose > Include debug (and above) messages in log. > -a, --append > > There is also no "vdsm-tool validate-config" command > > > rpm -qa|grep vdsm > > vdsm-jsonrpc-4.18.21-1.el7.centos.noarch > vdsm-cli-4.18.21-1.el7.centos.noarch > vdsm-4.18.21-1.el7.centos.x86_64 > vdsm-api-4.18.21-1.el7.centos.noarch > vdsm-infra-4.18.21-1.el7.centos.noarch > vdsm-python-4.18.21-1.el7.centos.noarch > > vdsm-hook-vmfex-dev-4.18.21-1.el7.centos.noarch > > vdsm-xmlrpc-4.18.21-1.el7.centos.noarch > > vdsm-yajsonrpc-4.18.21-1.el7.centos.noarch > > What could be the problem? > Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] problem installing/upgrading hosts after 3.6 to 4.0 update
Hi, It was time to upgrade our ancient ovirt 3.6 to 4.0 (and then to 4.1), but I'm having some issues in our test environment. After upgrading the engine, I try to reinstall a fresh provisioned Centos 7.4 node but it fails on the vdsm service. When debugging I see in the log that the step "vdsm-tool configure" fails: 2017-10-10 10:59:21 DEBUG otopi.context context._executeMethod:128 Stage closeup METHOD otopi.plugins.ovirt_host_deploy.vdsm.packages.Plugin._reconfigure 2017-10-10 10:59:21 DEBUG otopi.plugins.ovirt_host_deploy.vdsm.packages plugin.executeRaw:813 execute: ('/bin/vdsm-tool', 'configure', '--force'), executable='None', cwd='None', env=None 2017-10-10 10:59:21 DEBUG otopi.plugins.ovirt_host_deploy.vdsm.packages plugin.executeRaw:863 execute-result: ('/bin/vdsm-tool', 'configure', '--force'), rc=1 2017-10-10 10:59:21 DEBUG otopi.plugins.ovirt_host_deploy.vdsm.packages plugin.execute:921 execute-output: ('/bin/vdsm-tool', 'configure', '--force') stdout: Usage: /bin/vdsm-tool [options] [arguments] Valid options: -h, --help Show this help menu. -l, --logfile Redirect logging to file. -v, --verbose When I run it by hand, there is no action "configure" vdsm-tool -vvv configure Usage: /usr/bin/vdsm-tool [options] [arguments] Valid options: -h, --help Show this help menu. -l, --logfile Redirect logging to file. -v, --verbose Include warning (and errors) messages in log. -vv, --vverbose Include information (and above) messages in log. -vvv, --vvverbose Include debug (and above) messages in log. -a, --append There is also no "vdsm-tool validate-config" command rpm -qa|grep vdsm vdsm-jsonrpc-4.18.21-1.el7.centos.noarch vdsm-cli-4.18.21-1.el7.centos.noarch vdsm-4.18.21-1.el7.centos.x86_64 vdsm-api-4.18.21-1.el7.centos.noarch vdsm-infra-4.18.21-1.el7.centos.noarch vdsm-python-4.18.21-1.el7.centos.noarch vdsm-hook-vmfex-dev-4.18.21-1.el7.centos.noarch vdsm-xmlrpc-4.18.21-1.el7.centos.noarch vdsm-yajsonrpc-4.18.21-1.el7.centos.noarch What could be the problem? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null
ava:21) at org.ovirt.engine.ui.webadmin.uicommon.model.SystemTreeModelProvider.$setSelectedItems(SystemTreeModelProvider.java:108) at org.ovirt.engine.ui.webadmin.uicommon.model.SystemTreeModelProvider$1.onSelectionChange(SystemTreeModelProvider.java:59) at com.google.gwt.view.client.SelectionChangeEvent.dispatch(SelectionChangeEvent.java:98) [gwt-servlet.jar:] at com.google.gwt.event.shared.GwtEvent.dispatch(GwtEvent.java:76) [gwt-servlet.jar:] at com.google.web.bindery.event.shared.SimpleEventBus.$doFire(SimpleEventBus.java:173) [gwt-servlet.jar:] ... 27 more Caused by: com.google.gwt.core.client.JavaScriptException: (TypeError) __gwt$exception: : a is null at org.ovirt.engine.ui.webadmin.plugin.entity.SystemTreeItemObject.from(SystemTreeItemObject.java:15) at org.ovirt.engine.ui.webadmin.uicommon.model.SystemTreeSelectionChangeEvent.$dispatch(SystemTreeSelectionChangeEvent.java:50) at org.ovirt.engine.ui.webadmin.uicommon.model.SystemTreeSelectionChangeEvent.dispatch(SystemTreeSelectionChangeEvent.java:50) at com.google.gwt.event.shared.GwtEvent.dispatch(GwtEvent.java:76) [gwt-servlet.jar:] at com.google.web.bindery.event.shared.SimpleEventBus.$doFire(SimpleEventBus.java:173) [gwt-servlet.jar:] ... 34 more On 10/27/2016 11:26 AM, Jorick Astrego wrote: > > > > On 10/20/2016 03:14 PM, Alexander Wels wrote: >> On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote: >>> On 10/18/2016 03:59 PM, Michal Skrivanek wrote: >>>>> On 18 Oct 2016, at 15:56, Alexander Wels<aw...@redhat.com> wrote: >>>>> >>>>> On Tuesday, October 18, 2016 3:44:31 PM EDT Jorick Astrego wrote: >>>>>> Hi, >>>>>> >>>>>> We have ovirt connected to our freeipa domain. Things work fine >>>>>> >>>>>> generally, but once in a while I get the following error pop up in the >> ui: >>>>>> Uncaught exception occurred. Please try reloading the page. Details: >>>>>> Exception caught: Exception caught: (TypeError) __gwt$exception: >>>>>> : Cannot read property 'f' of null >>>>>> Please have your administrator check the UI logs >>>>> Could you install the symbol maps assocaited with the obfuscated code so >>>>> we >>>>> can get a readable stack trace. To install the symbol maps please run the >>>>> following command on the machine running the engine (or VM if it is HE). >>>>> >>>>> yum install ovirt-engine-webadmin-portal-debuginfo >>>>> >>>>> Please restart the ovirt-engine process with >>>>> >>>>> systemctl restart ovirt-engine >>>>> >>>>> after you have installed the symbol maps. Then next time you see the >>>>> message in the UI, the stack trace in the log should be readable and we >>>>> can help you better determine what is causing the problem. >>>> right, that’s likely even easier than what I just wrote;-) >>>> >>>>>> The log that goes with it: >>>>>> >>>>>> 2016-10-17 16:31:32,578 ERROR >>>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] >>>>>> (default task-21) [] Permutation name: 430985F23DFC1C8BE1C7FDD91EDAA785 >>>>>> 2016-10-17 16:31:32,578 ERROR >>>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] >>>>>> (default task-21) [] Uncaught exception: : >>>>>> com.google.gwt.event.shared.UmbrellaException: Exception caught: >>>>>> Exception caught: (TypeError) >>>>>> >>>>>>__gwt$exception: : Cannot read property 'f' of null >>>>>> >>>>>> at >>>>>> >>>>>> Unknown.ps(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@3837) at >>>>>> Unknown.xs(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@41) at >>>>>> Unknown.C3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at >>>>>> Unknown.F3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at >>>>>> Unknown.P2(https://ovir
Re: [ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null
On 10/20/2016 03:14 PM, Alexander Wels wrote: > On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote: >> On 10/18/2016 03:59 PM, Michal Skrivanek wrote: >>>> On 18 Oct 2016, at 15:56, Alexander Wels <aw...@redhat.com> wrote: >>>> >>>> On Tuesday, October 18, 2016 3:44:31 PM EDT Jorick Astrego wrote: >>>>> Hi, >>>>> >>>>> We have ovirt connected to our freeipa domain. Things work fine >>>>> >>>>> generally, but once in a while I get the following error pop up in the > ui: >>>>> Uncaught exception occurred. Please try reloading the page. Details: >>>>> Exception caught: Exception caught: (TypeError) __gwt$exception: >>>>> : Cannot read property 'f' of null >>>>> Please have your administrator check the UI logs >>>> Could you install the symbol maps assocaited with the obfuscated code so >>>> we >>>> can get a readable stack trace. To install the symbol maps please run the >>>> following command on the machine running the engine (or VM if it is HE). >>>> >>>> yum install ovirt-engine-webadmin-portal-debuginfo >>>> >>>> Please restart the ovirt-engine process with >>>> >>>> systemctl restart ovirt-engine >>>> >>>> after you have installed the symbol maps. Then next time you see the >>>> message in the UI, the stack trace in the log should be readable and we >>>> can help you better determine what is causing the problem. >>> right, that’s likely even easier than what I just wrote;-) >>> >>>>> The log that goes with it: >>>>> >>>>> 2016-10-17 16:31:32,578 ERROR >>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] >>>>> (default task-21) [] Permutation name: 430985F23DFC1C8BE1C7FDD91EDAA785 >>>>> 2016-10-17 16:31:32,578 ERROR >>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] >>>>> (default task-21) [] Uncaught exception: : >>>>> com.google.gwt.event.shared.UmbrellaException: Exception caught: >>>>> Exception caught: (TypeError) >>>>> >>>>>__gwt$exception: : Cannot read property 'f' of null >>>>> >>>>> at >>>>> >>>>> Unknown.ps(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@3837) at >>>>> Unknown.xs(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@41) at >>>>> Unknown.C3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at >>>>> Unknown.F3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at >>>>> Unknown.P2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@117) at >>>>> Unknown.hwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@41) at >>>>> Unknown.twf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@162) at >>>>> Unknown.xwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@14293) at >>>>> Unknown.KVe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@1172) at >>>>> Unknown.yUe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@33) at >>>>> Unknown.viy(@53)at Unknown.Piy(@18587) at >>>>> Unknown.zOr(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@189) at >>>>> Unknown.$to(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@311) at >>>>> Unknown.VBo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@2599) at >>>>> Unknown.mCo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@8942) at >>>>> Un
Re: [ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null
On 10/20/2016 03:14 PM, Alexander Wels wrote: > On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote: >> On 10/18/2016 03:59 PM, Michal Skrivanek wrote: >>>> On 18 Oct 2016, at 15:56, Alexander Wels <aw...@redhat.com> wrote: >>>> >>>> On Tuesday, October 18, 2016 3:44:31 PM EDT Jorick Astrego wrote: >>>>> Hi, >>>>> >>>>> We have ovirt connected to our freeipa domain. Things work fine >>>>> >>>>> generally, but once in a while I get the following error pop up in the > ui: >>>>> Uncaught exception occurred. Please try reloading the page. Details: >>>>> Exception caught: Exception caught: (TypeError) __gwt$exception: >>>>> : Cannot read property 'f' of null >>>>> Please have your administrator check the UI logs >>>> Could you install the symbol maps assocaited with the obfuscated code so >>>> we >>>> can get a readable stack trace. To install the symbol maps please run the >>>> following command on the machine running the engine (or VM if it is HE). >>>> >>>> yum install ovirt-engine-webadmin-portal-debuginfo >>>> >>>> Please restart the ovirt-engine process with >>>> >>>> systemctl restart ovirt-engine >>>> >>>> after you have installed the symbol maps. Then next time you see the >>>> message in the UI, the stack trace in the log should be readable and we >>>> can help you better determine what is causing the problem. >>> right, that’s likely even easier than what I just wrote;-) >>> >>>>> The log that goes with it: >>>>> >>>>> 2016-10-17 16:31:32,578 ERROR >>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] >>>>> (default task-21) [] Permutation name: 430985F23DFC1C8BE1C7FDD91EDAA785 >>>>> 2016-10-17 16:31:32,578 ERROR >>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService] >>>>> (default task-21) [] Uncaught exception: : >>>>> com.google.gwt.event.shared.UmbrellaException: Exception caught: >>>>> Exception caught: (TypeError) >>>>> >>>>>__gwt$exception: : Cannot read property 'f' of null >>>>> >>>>> at >>>>> >>>>> Unknown.ps(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@3837) at >>>>> Unknown.xs(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@41) at >>>>> Unknown.C3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at >>>>> Unknown.F3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at >>>>> Unknown.P2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F >>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@117) at >>>>> Unknown.hwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@41) at >>>>> Unknown.twf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@162) at >>>>> Unknown.xwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@14293) at >>>>> Unknown.KVe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@1172) at >>>>> Unknown.yUe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@33) at >>>>> Unknown.viy(@53)at Unknown.Piy(@18587) at >>>>> Unknown.zOr(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@189) at >>>>> Unknown.$to(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@311) at >>>>> Unknown.VBo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@2599) at >>>>> Unknown.mCo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985 >>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@8942) at >>>>> Un
[ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null
@6015) at Unknown.x$(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F23DFC1C8BE1C7FDD91EDAA785.cache.html@4001) at Unknown.Z2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F23DFC1C8BE1C7FDD91EDAA785.cache.html@209) at Unknown.I2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F23DFC1C8BE1C7FDD91EDAA785.cache.html@28) ... 32 more Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] CARP Fails on Bond mode=1
Hi, I tried sending this last week, but somehow the list blackholes my messages You could try to add " net.inet.carp.drop_echoed=1" to pfsense in /etc/sysctl.conf ? It is an old fix for VMWare and FreeBSD. I am not able to test it at the moment but I can see it's not in the config of the latest version of PFSense. Or maybe better: https://doc.pfsense.org/index.php/CARP_Configuration_Troubleshooting Client Port Issues If a physical CARP cluster is connected to a switch with an ESX box using multiple ports on the ESX box (lagg group or similar), and only certain devices/IPs are reachable by the target VM, then the port group settings in ESX may need adjusted to set the load balancing for the group to hash based on IP, not the originating interface. Side effects of having that set incorrectly include: * Traffic only reaching the target VM in promisc mode on its NIC * Inability to reach the CARP IP from the target VM when the "real" IP of the primary firewall is reachable * Port forwards or other inbound connections to the target VM work from some IPs and not others. So you could try with bonding option "xmit_hash_policy=layer2+3" and see if that helps... Kind regards, Jorick Astrego On 07/13/2016 03:59 PM, Matt . wrote: > As addition: I get the same result using mode=4, only when I use > multiple VLANS on the interface. > > 2016-07-13 15:58 GMT+02:00 Matt .<yamakasi@gmail.com>: >> Hi Pavel, >> >> Thanks for your update. I also saw that the post are both online but I >> thought the second nic only advertises the mac so the switch does not >> get confused. >> >> The issue might be that i do VRRP, so the bond is connected to two >> switches, they are not stacked, only trunked as that's what VRRP >> requires and works well on the side where there is only one VLAN on >> the Host interface. >> >> It just goes wrong on multiple vlans. >> >> This is what I see everywhere. >> >> Mode 1 (active-backup) >> This mode places one of the interfaces into a backup state and will >> only make it active if the link is lost by the active interface. Only >> one slave in the bond is active at an instance of time. A different >> slave becomes active only when the active slave fails. This mode >> provides fault tolerance. >> >> It's sure I need to get my traffic back on my sending port, so that is >> why the arp for the passive port was there I thought. >> >> Are there other modes that should be working on VRRP in your understanding ? >> >> Thanks a lot, >> >> Matt >> >> >> >> 2016-07-13 15:43 GMT+02:00 Pavel Gashev<p...@acronis.com>: >>> In mode=1 the active interface sends traffic, but both interfaces accept >>> incoming traffic. Hardware switches send broadcast/multicast/unknown >>> destination MACs to all ports, including the passive interface. So packet >>> sent from the active interface can be received back from the passive >>> interface. FreeBSD CARP just would go mad when it receives its own packets. >>> >>> I believe if you get Linux implementation, it will work well in the same >>> network setup. I use keepalived in oVirt VMs with bonded network, and have >>> no issues. >>> >>> -Original Message- >>> From: "Matt ."<yamakasi@gmail.com> >>> Date: Wednesday 13 July 2016 at 15:54 >>> To: Pavel Gashev<p...@acronis.com>, users<users@ovirt.org> >>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1 >>> >>> How can it lead into packet duplication when the passive should not be >>> active and only it's mac-address should be visible on the switch to >>> prevent confusion on the switch ? >>> >>> For a VRRP setup on the switch there is no other option then mode=1 as >>> far as I know ? >>> >>> 2016-07-13 14:50 GMT+02:00 Pavel Gashev<p...@acronis.com>: >>>> I would say that bonding breaks CARP somehow. In example mode=1 can lead >>>> to packet duplication, so pfsense can receive it's own packets. Try >>>> firewall in pfsense all incomming packets that have the same source MAC >>>> address as pfsense. >>>> >>>> -Original Message- >>>> From: "Matt ."<yamakasi@gmail.com> >>>> Date: Wednesday 13 July 2016 at 15:29 >>>> To: Pavel Gashev<p...@acronis.com> >>>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1 >>>> >>>> Hi Pavel, &
Re: [ovirt-users] CARP Fails on Bond mode=1
Hi, You could try to add " net.inet.carp.drop_echoed=1" to pfsense in /etc/sysctl.conf ? It is an old fix for VMWare and FreeBSD. I am not able to test it at the moment but I can see it's not in the config of the latest version of PFSense. Or maybe better: https://doc.pfsense.org/index.php/CARP_Configuration_Troubleshooting Client Port Issues If a physical CARP cluster is connected to a switch with an ESX box using multiple ports on the ESX box (lagg group or similar), and only certain devices/IPs are reachable by the target VM, then the port group settings in ESX may need adjusted to set the load balancing for the group to hash based on IP, not the originating interface. Side effects of having that set incorrectly include: * Traffic only reaching the target VM in promisc mode on its NIC * Inability to reach the CARP IP from the target VM when the "real" IP of the primary firewall is reachable * Port forwards or other inbound connections to the target VM work from some IPs and not others. So you could try with bonding option "xmit_hash_policy=layer2+3" and see if that helps... Kind regards, Jorick Astrego On 07/13/2016 03:59 PM, Matt . wrote: > As addition: I get the same result using mode=4, only when I use > multiple VLANS on the interface. > > 2016-07-13 15:58 GMT+02:00 Matt .<yamakasi@gmail.com>: >> Hi Pavel, >> >> Thanks for your update. I also saw that the post are both online but I >> thought the second nic only advertises the mac so the switch does not >> get confused. >> >> The issue might be that i do VRRP, so the bond is connected to two >> switches, they are not stacked, only trunked as that's what VRRP >> requires and works well on the side where there is only one VLAN on >> the Host interface. >> >> It just goes wrong on multiple vlans. >> >> This is what I see everywhere. >> >> Mode 1 (active-backup) >> This mode places one of the interfaces into a backup state and will >> only make it active if the link is lost by the active interface. Only >> one slave in the bond is active at an instance of time. A different >> slave becomes active only when the active slave fails. This mode >> provides fault tolerance. >> >> It's sure I need to get my traffic back on my sending port, so that is >> why the arp for the passive port was there I thought. >> >> Are there other modes that should be working on VRRP in your understanding ? >> >> Thanks a lot, >> >> Matt >> >> >> >> 2016-07-13 15:43 GMT+02:00 Pavel Gashev<p...@acronis.com>: >>> In mode=1 the active interface sends traffic, but both interfaces accept >>> incoming traffic. Hardware switches send broadcast/multicast/unknown >>> destination MACs to all ports, including the passive interface. So packet >>> sent from the active interface can be received back from the passive >>> interface. FreeBSD CARP just would go mad when it receives its own packets. >>> >>> I believe if you get Linux implementation, it will work well in the same >>> network setup. I use keepalived in oVirt VMs with bonded network, and have >>> no issues. >>> >>> -Original Message- >>> From: "Matt ."<yamakasi@gmail.com> >>> Date: Wednesday 13 July 2016 at 15:54 >>> To: Pavel Gashev<p...@acronis.com>, users<users@ovirt.org> >>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1 >>> >>> How can it lead into packet duplication when the passive should not be >>> active and only it's mac-address should be visible on the switch to >>> prevent confusion on the switch ? >>> >>> For a VRRP setup on the switch there is no other option then mode=1 as >>> far as I know ? >>> >>> 2016-07-13 14:50 GMT+02:00 Pavel Gashev<p...@acronis.com>: >>>> I would say that bonding breaks CARP somehow. In example mode=1 can lead >>>> to packet duplication, so pfsense can receive it's own packets. Try >>>> firewall in pfsense all incomming packets that have the same source MAC >>>> address as pfsense. >>>> >>>> -Original Message- >>>> From: "Matt ."<yamakasi@gmail.com> >>>> Date: Wednesday 13 July 2016 at 15:29 >>>> To: Pavel Gashev<p...@acronis.com> >>>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1 >>>> >>>> Hi Pavel, >>>> >>>> No it's Pfsense, so FreeBSD. >>>> >&g
Re: [ovirt-users] CARP Fails on Bond mode=1
;> 2016-07-13 13:59 GMT+02:00 Pavel Gashev <p...@acronis.com>: >>>>> Matt, >>>>> >>>>> How is CARP implemented? Is it OpenBSD? >>>>> >>>>> -Original Message- >>>>> From: <users-boun...@ovirt.org> on behalf of "Matt ." >>>>> <yamakasi@gmail.com> >>>>> Date: Wednesday 13 July 2016 at 12:42 >>>>> Cc: users <users@ovirt.org> >>>>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1 >>>>> >>>>> Hi Pavel, >>>>> >>>>> This is done and used without the Bond before. >>>>> >>>>> Now I applied a bond it goes wrong and I'm searching but can't find a >>>>> thing about it. >>>>> >>>>> >>>>> >>>>> 2016-07-13 11:03 GMT+02:00 Pavel Gashev <p...@acronis.com>: >>>>>> Matt, >>>>>> >>>>>> In order to use CARP/VRRP in a VM you have to disable MAC spoofing >>>>>> prevention. >>>>>> http://lists.ovirt.org/pipermail/users/2015-May/032839.html >>>>>> >>>>>> -Original Message- >>>>>> From: <users-boun...@ovirt.org> on behalf of "Matt ." >>>>>> <yamakasi@gmail.com> >>>>>> Date: Tuesday 12 July 2016 at 21:58 >>>>>> To: users <users@ovirt.org> >>>>>> Subject: [ovirt-users] CARP Fails on Bond mode=1 >>>>>> >>>>>> Hi guys, >>>>>> >>>>>> I have been testing bonding with a vm connected to the network on this >>>>>> bond mode=1 (vlans on top of it) where the vm uses a carp IP for >>>>>> failover. >>>>>> >>>>>> It seems that when the VM which holds the Carp IP and so is Master you >>>>>> can ping both IP's, so interface IP and Carp IP, but you cannot >>>>>> throw/route any traffic over it. >>>>>> >>>>>> You can route traffic over the interface IP of the Carp Slave. >>>>>> >>>>>> Is this known or just not possible ? >>>>>> >>>>>> I hope it's a "bug" :) >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Matt >>>>>> ___ >>>>>> Users mailing list >>>>>> Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >>>>> ___ >>>>> Users mailing list >>>>> Users@ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>>> >>>> >>> > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] engine gives JBAS015011 java.lang.NullPointerException
Hi, Fixed it yesterday, there were some directories like /usr/share/ovirt-engine that came from the restore messing things up. I think the issue was that the original deployement was 3.5.5 and I now installed 3.5.6.2. Thanks for the assistance as it pointed me in the right way! Kind regards, Jorick On 05/06/2016 10:02 AM, Juan Hernández wrote: > On 05/06/2016 07:58 AM, Jorick Astrego wrote: >> Hi, >> >> One of our older ovirt engine 3.5.5 (CentOS 7) machines had a raid >> controller faillure and no recent ovirt-engine backup. >> >> So I recovered the files + database and reinstalled with >> ovirt-engine-3.5.6.2-1. But I can't get it to work. >> >> engine-setup runs fine but in the server.log I keep getting these and >> the webinterface is blank. >> > The /var/liv/ovirt-engine/jboss_runtime directory doesn't contain any > persistent data, and it will be the engine during startup if it doesn't > exist. So I'd suggest you remove it completely (with the engine stopped): > ># rm -rf /var/lib/ovirt-engine/jboss_runtime > > For this to work the "ovirt" user needs permission to write to > /var/lib/ovirt-engine, make sure that directory is owned by user "ovirt" > and group "ovirt", and that permissions are u=rwx,g=rx,o=r-x. > > However, if you lost permissions in other directories you will probably > have similar problems once this is solved. > >> 2016-05-05 17:24:43,431 INFO [org.apache.coyote.ajp.AjpProtocol] >> (MSC service thread 1-4) Starting Coyote AJP/1.3 on ajp--127.0.0.1-8702 >> 2016-05-05 17:24:43,493 INFO [org.jboss.as.remoting] (MSC service >> thread 1-2) JBAS017100: Listening on /127.0.0.1:8703 >> 2016-05-05 17:24:43,704 INFO [org.jboss.as.remoting] (MSC service >> thread 1-2) JBAS017100: Listening on /127.0.0.1:8706 >> 2016-05-05 17:24:43,720 INFO >> [org.jboss.as.server.deployment.scanner] (MSC service thread 1-1) >> JBAS015012: Started FileSystemDeploymentService for directory >> /var/lib/ovirt-engine/jboss_runtime/deployments >> 2016-05-05 17:24:43,893 INFO >> [org.jboss.as.connector.subsystems.datasources] (MSC service thread >> 1-3) JBAS010400: Bound data source [java:/ENGINEDataSource] >> 2016-05-05 17:24:43,899 ERROR >> [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads >> - 1) JBAS015011: Scan of >> /var/lib/ovirt-engine/jboss_runtime/deployments threw Exception: >> java.lang.NullPointerException >> at >> >> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:682) >> [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] >> at >> >> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683) >> [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] >> at >> >> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683) >> [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] >> at >> >> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683) >> [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] >> at >> >> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.scanDirectory(FileSystemDeploymentService.java:525) >> [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] >> at >> >> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.scan(FileSystemDeploymentService.java:336) >> [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] >> at >> >> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService$DeploymentScanRunnable.run(FileSystemDeploymentService.java:149) >> [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] >> at >> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) >> [rt.jar:1.7.0_101] >> at >> java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304) >> [rt.jar:1.7.0_101] >> at >> >> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:178) >> [rt.jar:1.7.0_101] >> at >> >&
[ovirt-users] engine gives JBAS015011 java.lang.NullPointerException
Hi, One of our older ovirt engine 3.5.5 (CentOS 7) machines had a raid controller faillure and no recent ovirt-engine backup. So I recovered the files + database and reinstalled with ovirt-engine-3.5.6.2-1. But I can't get it to work. engine-setup runs fine but in the server.log I keep getting these and the webinterface is blank. 2016-05-05 17:24:43,431 INFO [org.apache.coyote.ajp.AjpProtocol] (MSC service thread 1-4) Starting Coyote AJP/1.3 on ajp--127.0.0.1-8702 2016-05-05 17:24:43,493 INFO [org.jboss.as.remoting] (MSC service thread 1-2) JBAS017100: Listening on /127.0.0.1:8703 2016-05-05 17:24:43,704 INFO [org.jboss.as.remoting] (MSC service thread 1-2) JBAS017100: Listening on /127.0.0.1:8706 2016-05-05 17:24:43,720 INFO [org.jboss.as.server.deployment.scanner] (MSC service thread 1-1) JBAS015012: Started FileSystemDeploymentService for directory /var/lib/ovirt-engine/jboss_runtime/deployments 2016-05-05 17:24:43,893 INFO [org.jboss.as.connector.subsystems.datasources] (MSC service thread 1-3) JBAS010400: Bound data source [java:/ENGINEDataSource] 2016-05-05 17:24:43,899 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015011: Scan of /var/lib/ovirt-engine/jboss_runtime/deployments threw Exception: java.lang.NullPointerException at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:682) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.scanDirectory(FileSystemDeploymentService.java:525) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.scan(FileSystemDeploymentService.java:336) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService$DeploymentScanRunnable.run(FileSystemDeploymentService.java:149) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) [rt.jar:1.7.0_101] at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304) [rt.jar:1.7.0_101] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:178) [rt.jar:1.7.0_101] at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293) [rt.jar:1.7.0_101] at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) [rt.jar:1.7.0_101] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) [rt.jar:1.7.0_101] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_101] at org.jboss.threads.JBossThread.run(JBossThread.java:122) [jboss-threads-2.0.0.GA.jar:2.0.0.GA] 2016-05-05 17:24:44,141 INFO [org.jboss.as] (Controller Boot Thread) JBAS015874: JBoss AS 7.1.1.Final "Brontes" started in 3718ms - Started 136 of 160 services (23 services are passive or on-demand) 2016-05-05 17:24:48,918 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015011: Scan of /var/lib/ovirt-engine/jboss_runtime/deployments threw Exception: java.lang.NullPointerException at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:682) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] at org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683) [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final] Anyone seen these errors before? I have all the files/directories of the old drive but all the permissions are gone :-( Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A
Re: [ovirt-users] api access with poweruser role
On 10/29/2015 03:58 PM, Ondra Machacek wrote: > > > On 10/29/2015 03:56 PM, Ondra Machacek wrote: >> >> >> On 10/28/2015 11:29 AM, Jorick Astrego wrote: >>> >>> >>> On 10/26/2015 03:14 PM, Jorick Astrego wrote: >>>> >>>> >>>> On 10/26/2015 02:57 PM, Ondra Machacek wrote: >>>>> >>>>> >>>>> On 10/26/2015 02:53 PM, Jorick Astrego wrote: >>>>>> Hi, >>>>>> >>>>>> Currently I'm trying to add an ovirt compute resource in forman >>>>>> that is limited to the VM's of the user. >>>>>> >>>>>> When I give this user the PowerUser role, I cannot access the api: >>>>>> >>>>>> query execution failed due to insufficient permissions >>>>>> >>>>> >>>>> Are you sending header 'Filter: true' with the request ? >>>>> If your user is not admin(PowerUserRole is not admin role), >>>>> you have to use this header. >>>>> >>>>> >>>> >>> >>> Hmm, not much response on foreman-users.. >>> >>> I checked the code of fog in my foreman install ( >>> /opt/rh/ruby193/root/usr/share/gems/gems/fog-1.32.0/lib/fog/ovirt/compute.rb >>> ) and it appears to have the correct option merged: >>> >>> connection_opts[:filtered_api] = >>> options[:ovirt_filtered_api] >>> >>> >>> But I don't know what url the foreman actually generates, is there >>> any way to capture the login string? I tried setting some DEBUG >>> logging but don't get the output I'm looking for. >>> >>> >>> >>> >>> >> category="org.ovirt.engine.core.bll.aaa.LoginUserCommand"> >>> >>> >>> >> >>> category="org.ovirt.engine.api.restapi.resource.AbstractBackendResource"> >>> >>> >>> >>> >> >> It depends what url foreman client access. But you can set: >> >> >> >> >> >> And then you will see what commands was queried with or without the >> filtered API. >> >> 2015-10-29 15:45:45,436 TRACE >> [org.ovirt.engine.core.bll.GetAllVmsQuery] (ajp-/127.0.0.1:8702-1) [] >> START, GetAllVmsQuery(VdcQueryParametersBase:{refresh='true', >> filtered='true'}), log id: 53b3c8b9 >> >> ^^ This is example of running 'Filter: true' on /api/vms (you can see >> filtered='true'). > It appears the filtered tag doesn't get set. I'll continue on the foreman list from now. 2015-11-02 10:29:17,126 DEBUG [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (ajp--127.0.0.1-8702-9) Found permission fbcb73a0-226e-49d4-9e7a-01c665127a07 for user when running LoginUser, on Bottom with id bbb0----123456789bbb 2015-11-02 10:29:17,128 DEBUG [org.ovirt.engine.core.bll.aaa.LoginBaseCommand] (ajp--127.0.0.1-8702-9) Checking if user testuser is an admin, result false 2015-11-02 10:29:17,129 INFO [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (ajp--127.0.0.1-8702-9) Running command: LoginUserCommand(LoginName = null, ProfileName = netbulae.test, AuthRecord = {Extkey[name=AAA_AUTHN_AUTH_RECORD_PRINCIPAL;type=class java.lang.String;uuid=AAA_AUTHN_AUTH_RECORD_PRINCIPAL[c3498f07-11fe-464c-958c-8bd7490b119a];]=testuser}, IsAdmin = false, ActionType = LoginUser, AuthType = CREDENTIALS) internal: false. 2015-11-02 10:29:17,132 TRACE [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--127.0.0.1-8702-9) START, GetConfigurationValueQuery(version: general, configuration value: ApplicationMode, refresh: false, filtered: false), log id: 438b23b5 2015-11-02 10:29:17,134 TRACE [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--127.0.0.1-8702-9) FINISH, GetConfigurationValueQuery, log id: 438b23b5 2015-11-02 10:29:17,134 TRACE [org.ovirt.engine.core.bll.aaa.GetValueBySessionQuery] (ajp--127.0.0.1-8702-9) START, GetValueBySessionQuery(refresh: false, *filtered: false), *log id: 63d562b7 2015-11-02 10:29:17,135 TRACE [org.ovirt.engine.core.bll.aaa.GetValueBySessionQuery] (ajp--127.0.0.1-8702-9) FINISH, GetValueBySessionQuery, log id: 63d562b7 2015-11-02 10:29:17,136 TRACE [org.ovirt.engine.core.bll.SearchQuery] (ajp--127.0.0.1-8702-9) START, SearchQuery(search type: StoragePool, search pattern: [Datacenter : ], case sensitive: true [from: 0, max: -1] refresh: true, filtered: false), log id: 4e440f95 2015-11-02 10:29:17,138 ERROR [org.ovirt.engine.core.bll.SearchQuery] (ajp--127.0.0.1-8702-9) Query execution failed due to insufficient permissions. I've updated http://projects.theforeman.org/issues/6835 Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] api access with poweruser role
On 10/26/2015 03:14 PM, Jorick Astrego wrote: > > > On 10/26/2015 02:57 PM, Ondra Machacek wrote: >> >> >> On 10/26/2015 02:53 PM, Jorick Astrego wrote: >>> Hi, >>> >>> Currently I'm trying to add an ovirt compute resource in forman that >>> is limited to the VM's of the user. >>> >>> When I give this user the PowerUser role, I cannot access the api: >>> >>> query execution failed due to insufficient permissions >>> >> >> Are you sending header 'Filter: true' with the request ? >> If your user is not admin(PowerUserRole is not admin role), >> you have to use this header. >> >> > Hmm, not much response on foreman-users.. I checked the code of fog in my foreman install ( /opt/rh/ruby193/root/usr/share/gems/gems/fog-1.32.0/lib/fog/ovirt/compute.rb ) and it appears to have the correct option merged: connection_opts[:filtered_api] = options[:ovirt_filtered_api] But I don't know what url the foreman actually generates, is there any way to capture the login string? I tried setting some DEBUG logging but don't get the output I'm looking for. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] api access with poweruser role
On 10/26/2015 02:57 PM, Ondra Machacek wrote: > > > On 10/26/2015 02:53 PM, Jorick Astrego wrote: >> Hi, >> >> Currently I'm trying to add an ovirt compute resource in forman that >> is limited to the VM's of the user. >> >> When I give this user the PowerUser role, I cannot access the api: >> >> query execution failed due to insufficient permissions >> > > Are you sending header 'Filter: true' with the request ? > If your user is not admin(PowerUserRole is not admin role), > you have to use this header. > > As I'm using forman, I have no control over this. There used to be a bug, but it should have been patched months ago: http://projects.theforeman.org/issues/6835 - *Description* Cloned from https://bugzilla.redhat.com/show_bug.cgi?id=1123676 Description of problem: When trying to create a rhev compute resource with non-admin RHEV user, the following error occurs: "query execution failed due to insufficient permissions." The reason for this is the RHEV needs to be called with 'Filter: true' headers for the api to work correctly with non-admin user. The rbovirt client library supports to specify the filtered_api option, but fog and foreman don't have a support for that https://github.com/abenari/rbovirt/blob/a7c277e3fc5698e55e95a9432997b1a9c8d486ae/lib/rbovirt.rb#L54-L55 History #1 <http://projects.theforeman.org/issues/6835#note-1> Updated by Dominic Cleal <http://projects.theforeman.org/users/3536> about 1 year <http://projects.theforeman.org/projects/foreman/activity?from=2014-07-30> ago * *Category* set to /Compute resources - oVirt/ * *Assigned To* deleted (/Dominic Cleal/) #2 <http://projects.theforeman.org/issues/6835#note-2> Updated by Tom Caspy <http://projects.theforeman.org/users/5429> 10 months <http://projects.theforeman.org/projects/foreman/activity?from=2015-01-13> ago added a pull request to the fog gem: https://github.com/fog/fog/pull/3393 #3 <http://projects.theforeman.org/issues/6835#note-3> Updated by Ohad Levy <http://projects.theforeman.org/users/3> 5 months <http://projects.theforeman.org/projects/foreman/activity?from=2015-06-09> ago Fog PR has been merged a while ago. The version of rbovirt we have is: ruby193-rubygem-rbovirt-0.0.35-1.el6.noarch Kind regards, Jorick >> >> When I give this user the SuperUser role, I can access the api. But I >> can see all the VM's of all users. >> >> How can I grant api access so the user can deploy through forman >> without giving access to all the vm's in our oVirt environment? >> >> Kind regards, >> >> Jorick >> >> >> >> >> Met vriendelijke groet, With kind regards, >> >> Jorick Astrego >> * >> Netbulae Virtualization Experts * >> >> Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3AKvK >> 08198180 >> Fax: 053 20 30 271 www.netbulae.eu 7547 TA EnschedeBTW >> NL821234584B01 >> >> >> >> >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] api access with poweruser role
Hi, Currently I'm trying to add an ovirt compute resource in forman that is limited to the VM's of the user. When I give this user the PowerUser role, I cannot access the api: query execution failed due to insufficient permissions When I give this user the SuperUser role, I can access the api. But I can see all the VM's of all users. How can I grant api access so the user can deploy through forman without giving access to all the vm's in our oVirt environment? Kind regards, Jorick Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] unable to assign quota to users/groups
Hi, Found it. The quota tab is only visible when you select the datacenter. It's sometimes confusing that tabs appear/disappear acording to context :-& I'll close the BZ as it's a user error Thanks anyway! Kind regards, Jorick On 09/28/2015 02:42 PM, Alexander Wels wrote: > On Monday, September 28, 2015 11:23:33 AM Jorick Astrego wrote: >> I missed the reply, so I'm a bit late responding ;-) >> >> The screenshot from RHEV has a "Quota" and "vNic templates" tab after >> "Templates". Ovirt has the tabs "Volumes" and "Users" after "Templates". >> >> So there are some differences. >> >> >> >> Created BZ: >> https://bugzilla.redhat.com/show_bug.cgi?id=1264780 >> >> Kind regards, >> >> Jorick >> > Question, did you create a quota first before trying to assign it. IIRC the > quota tab is hidden if there is no quota to assign. > >> On 08/27/2015 02:10 PM, Artyom Lukianov wrote: >>> Doron, like I said I not encountered such behavior in 3.5. >>> Thanks >>> >>> - Original Message - >>> From: "Doron Fediuck" <dfedi...@redhat.com> >>> To: "Artyom Lukianov" <aluki...@redhat.com> >>> Cc: "Jorick Astrego" <j.astr...@netbulae.eu>, "users" <users@ovirt.org> >>> Sent: Thursday, August 27, 2015 2:48:41 PM >>> Subject: Re: [ovirt-users] unable to assign quota to users/groups >>> >>> Please open a BZ and attach a screenshot. >>> >>> Thanks, >>> Doron >>> >>> On Tue, Aug 25, 2015 at 5:45 PM, Artyom Lukianov <aluki...@redhat.com> >>> >>> wrote: >>>> Not in 3.5, in 3.6 we have REST API for quota, but it's really strange, >>>> can you attach screenshot how looks detail panel, when you click on >>>> specific quota. >>>> Thanks >>>> >>>> - Original Message - >>>> From: "Jorick Astrego" <j.astr...@netbulae.eu> >>>> To: users@ovirt.org >>>> Sent: Tuesday, August 25, 2015 1:06:34 PM >>>> Subject: [ovirt-users] unable to assign quota to users/groups >>>> >>>> In 3.5.3, I'm trying to set a quota for each user. But I cannot find how >>>> to do it anymore as the Quota consumers tab is not there in my 3.5.3 >>>> install. >>>> >>>> >>>> 17.8. Using Quota to Limit Resources by User >>>> Summary >>>> This procedure describes how to use quotas to limit the resources a user >>>> has access to. >>>> >>>> Procedure 17.5. Assigning a User to a Quota >>>> >>>> In the tree, click the Data Center with the quota you want to associate >>>> with a User. >>>> Click the Quota tab in the navigation pane. >>>> Select the target quota in the list in the navigation pane. >>>> Click the Consumers tab in the details pane. >>>> Click Add at the top of the details pane. >>>> In the Search field, type the name of the user you want to associate with >>>> the quota. >>>> Click GO. >>>> Select the check box at the left side of the row containing the name of >>>> the target user. >>>> Click OK in the bottom right of the Assign Users and Groups to Quota >>>> window. >>>> Result >>>> After a short time, the user will appear in the Consumers tab of the >>>> details pane. >>>> >>>> What happened to the details pane? Is there another way to assign a quota >>>> to users/groups? >>>> >>>> >>>> >>>> Met vriendelijke groet, With kind regards, >>>> >>>> Jorick Astrego >>>> >>>> Netbulae Virtualization Experts >>>> >>>> Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A >>>> KvK 08198180 >>>> >>>> Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede >>>> >>>> BTW NL821234584B01 >>>> >>>> ___ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> ___ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >> Met vriendelijke groet, With kind regards, >> >> Jorick Astrego >> >> Netbulae Virtualization Experts >> >> >> >> Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A >> KvK 08198180 >> Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede >> BTW > NL821234584B01 >> Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] unable to assign quota to users/groups
I missed the reply, so I'm a bit late responding ;-) The screenshot from RHEV has a "Quota" and "vNic templates" tab after "Templates". Ovirt has the tabs "Volumes" and "Users" after "Templates". So there are some differences. Created BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1264780 Kind regards, Jorick On 08/27/2015 02:10 PM, Artyom Lukianov wrote: > Doron, like I said I not encountered such behavior in 3.5. > Thanks > > - Original Message - > From: "Doron Fediuck" <dfedi...@redhat.com> > To: "Artyom Lukianov" <aluki...@redhat.com> > Cc: "Jorick Astrego" <j.astr...@netbulae.eu>, "users" <users@ovirt.org> > Sent: Thursday, August 27, 2015 2:48:41 PM > Subject: Re: [ovirt-users] unable to assign quota to users/groups > > Please open a BZ and attach a screenshot. > > Thanks, > Doron > > On Tue, Aug 25, 2015 at 5:45 PM, Artyom Lukianov <aluki...@redhat.com> > wrote: > >> Not in 3.5, in 3.6 we have REST API for quota, but it's really strange, >> can you attach screenshot how looks detail panel, when you click on >> specific quota. >> Thanks >> >> - Original Message - >> From: "Jorick Astrego" <j.astr...@netbulae.eu> >> To: users@ovirt.org >> Sent: Tuesday, August 25, 2015 1:06:34 PM >> Subject: [ovirt-users] unable to assign quota to users/groups >> >> In 3.5.3, I'm trying to set a quota for each user. But I cannot find how >> to do it anymore as the Quota consumers tab is not there in my 3.5.3 >> install. >> >> >> 17.8. Using Quota to Limit Resources by User >> Summary >> This procedure describes how to use quotas to limit the resources a user >> has access to. >> >> Procedure 17.5. Assigning a User to a Quota >> >> In the tree, click the Data Center with the quota you want to associate >> with a User. >> Click the Quota tab in the navigation pane. >> Select the target quota in the list in the navigation pane. >> Click the Consumers tab in the details pane. >> Click Add at the top of the details pane. >> In the Search field, type the name of the user you want to associate with >> the quota. >> Click GO. >> Select the check box at the left side of the row containing the name of >> the target user. >> Click OK in the bottom right of the Assign Users and Groups to Quota >> window. >> Result >> After a short time, the user will appear in the Consumers tab of the >> details pane. >> >> What happened to the details pane? Is there another way to assign a quota >> to users/groups? >> >> >> >> Met vriendelijke groet, With kind regards, >> >> Jorick Astrego >> >> Netbulae Virtualization Experts >> >> Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A >> KvK 08198180 >> Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede >> BTW NL821234584B01 >> >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > > Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] why replica 3
On 09/09/2015 10:14 AM, Richard Neuboeck wrote: > On 04.09.15 10:02, Simone Tiraboschi wrote: >> Is there a reason why it has to be exactly replica 3? >> >> >> To have a valid quorum having the system being able to decide witch is >> the right and safe copy avoiding an issue called split brain. >> Under certain circumstances/issues (network issue, hosts down or >> whatever could happen) the data on different replica could diverge: if >> you have two and just two different hosts that claim each other > that its >> copy is the right one there is no way to automatically take the right >> decision. Having three hosts and setting the quorum according to that >> solves/mitigates the issue. > > Thanks for the explanation. I do understand the problem but since > I'm somewhat limited in my hardware options is there a way to > override this requirement? Meaning if I change the checks for > replica 3 in the installation scripts does something else fail on > the way? > > In my case coherence checks would come from outside the storage and > vm host setup and fencing would be applied appropriately. > > I would very much appreciate it if the particulars of the storage > setup could be either selected from a list of possibilities or be > ignored and just a warning be issued that this setup is not recommended. > > Thanks! > Richard > > As a side question, in Glusterfs 3.7 there is an "AFR arbiter volume" (http://gluster.readthedocs.org/en/release-3.7.0-1/Features/afr-arbiter-volumes/) that will only contain the metadata. Will ovirt support this in 3.6? Kind regards, Jorick Astrego Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] unable to assign quota to users/groups
In 3.5.3, I'm trying to set a quota for each user. But I cannot find how to do it anymore as the Quota consumers tab is not there in my 3.5.3 install. 17.8. Using Quota to Limit Resources by User Summary This procedure describes how to use quotas to limit the resources a user has access to. Procedure 17.5. Assigning a User to a Quota In the tree, click the Data Center with the quota you want to associate with a User. Click the Quota tab in the navigation pane. Select the target quota in the list in the navigation pane. *Click the Consumers tab in the details pane.* Click Add at the top of the details pane. In the Search field, type the name of the user you want to associate with the quota. Click GO. Select the check box at the left side of the row containing the name of the target user. Click OK in the bottom right of the Assign Users and Groups to Quota window. Result After a short time, the user will appear in the Consumers tab of the details pane. What happened to the details pane? Is there another way to assign a quota to users/groups? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] openstack Icehouse EOL
Hi, I've noticed openstack Icehouse is EOL, what is the next recommended compatible openstack release for Neutron integration for 3.5? And for 3.6? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ovirt and Gluster
For RHEV I don't have an answer. But for anyone that cares, we've been running oVirt 3.5 and GlusterFS 3.6 for about three months in production now. We run a Gluster cluster and a seperate virtualization hosts cluster. The Gluster cluster is installed, configured and managed seperately from oVirt as there is no way to have a seperate storage network in oVirt 3.5 There have been no specific incompatibility issues, so we are very happy. But as we don't use every feature mileage may vary. The best thing is we we're able to kick our Corosync/Pacemaker/DRBD HA iSCSI nightmare to the curb ;-) We do recommend using only replica 3 and monitoring your environment and glusterfs logfiles extensively. Kind regards, Jorick Astrego On 07/29/2015 02:07 AM, John Gardeniers wrote: What makes me say that RHEV and the community version of Gluster are incompatible is a message from Red Hat saying so. Of particular note, the RHSS version of Gluster uses afr-v1, whereas the community version uses afr-v2. Exactly how the mismatch will manifest itself or what problems may result has not been described. On 29/07/15 09:31, Matthew Lagoe wrote: Sorry my mistake I ment RHEV *From:*John Gardeniers [mailto:jgardeni...@objectmastery.com] *Sent:* Tuesday, July 28, 2015 04:30 PM *To:* Matthew Lagoe; 'Donny Davis' *Cc:* 'users' *Subject:* Re: [ovirt-users] Ovirt and Gluster Seriously? I very explicitly said RHEV, not Ovirt. On 29/07/15 09:10, Matthew Lagoe wrote: Ive never heard that ovirt isn’t compatible with the community version of gluster. What is it that makes you say that? *From:*users-boun...@ovirt.org mailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *On Behalf Of *John Gardeniers *Sent:* Tuesday, July 28, 2015 04:06 PM *To:* Donny Davis *Cc:* users *Subject:* Re: [ovirt-users] Ovirt and Gluster No, not yet. I figured that I should be able to get better answers here, as the Gluster list has been particularly poor for answers to Ovirt related questions. On 29/07/15 08:55, Donny Davis wrote: One more question Have you asked anyone on the gluster list? On Jul 28, 2015 5:32 PM, John Gardeniers jgardeni...@objectmastery.com mailto:jgardeni...@objectmastery.com wrote: The feature I require is solid compatibility between Ovirt and Gluster. We currently use RHEV and now learn that it is inherently, and possibly quite deliberately, incompatible with the community versions of Gluster. On 29/07/15 08:18, Donny Davis wrote: What feature is it that you need for your production environment? I would be looking for !required! features for the environment, and then which versions are the most mature. On Tue, Jul 28, 2015 at 5:07 PM, John Gardeniers jgardeni...@objectmastery.com mailto:jgardeni...@objectmastery.com wrote: That popular Linux company uses versions with reduced features and functionality, which have no direct comparison to the community versions. On 29/07/15 08:04, Donny Davis wrote: I would stick with the same versions I see a popular Linux company putting out. On Jul 27, 2015 6:15 PM, John Gardeniers jgardeni...@objectmastery.com mailto:jgardeni...@objectmastery.com wrote: Hi All, What information is available regarding the compatibility of Ovirt and Gluster? Is there a combination known to be stable and if so, what are the relevant versions? I am asking with respect to a production system, not an experimental lab environment. regards, John ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users __ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com __ -- Donny Davis __ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com
Re: [ovirt-users] R: R: R: R: R: R: R: R: PXE boot of a VM on vdsm don't read DHCP offer
On 07/29/2015 12:12 PM, NUNIN Roberto wrote: -Messaggio originale- Da: Michael S. Tsirkin [mailto:m...@redhat.com] Inviato: mercoledì 29 luglio 2015 12:03 A: NUNIN Roberto Cc: Fabian Deutsch; users@ovirt.org Oggetto: Re: R: [ovirt-users] R: R: R: R: R: R: PXE boot of a VM on vdsm don't read DHCP offer On Wed, Jul 29, 2015 at 12:00:38PM +0200, NUNIN Roberto wrote: -Messaggio originale- Da: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Per conto di Michael S. Tsirkin Inviato: giovedì 9 luglio 2015 15:15 A: Fabian Deutsch Cc: users@ovirt.org Oggetto: Re: [ovirt-users] R: R: R: R: R: R: PXE boot of a VM on vdsm don't read DHCP offer On Thu, Jul 09, 2015 at 08:57:50AM -0400, Fabian Deutsch wrote: - Original Message - On Wed, Jul 08, 2015 at 09:11:42AM +0300, Michael S. Tsirkin wrote: On Tue, Jul 07, 2015 at 05:13:28PM +0100, Dan Kenigsberg wrote: On Tue, Jul 07, 2015 at 10:14:54AM +0200, NUNIN Roberto wrote: On Mon, Jul 06, 2015 at 10:33:59AM +0200, NUNIN Roberto wrote: Hi Dan Sorry for question: what do you mean for interface vnet ? Currently our path is : eno1 - eno2 bond0 - bond.3500 (VLAN) -- bridge - vm. Which one of these ? Moreover, reading Fabian statements about bonding limits, today I can try to switch to a config without bonding. vm is a complicated term. `brctl show` would not show you a vm connected to a bridge. When you WOULD see is a vnet888 tap device. The other side of this device is held by qemu, which implement the VM. Ok, understood and found it, vnet2 I'm asking if the dhcp offer has reached that tap device. No, the DHCP offer packet do not reach the vnet2 interface, I can see only DHCP DISCOVER. Ok, so it seems that we have a problem in the host bridging. Is it the latest kernel-3.10.0-229.7.2.el7.x86_64 ? Michael, a DHCP DISCOVER is sent out of a just-booted guest, and OFFER returns to the bridge, but is not propagated to the tap device. Can you suggest how to debug this further? Dump packets including the ethernet headers. Likely something interfered with them so the eth address is wrong. Since bonding does this sometimes, this is the most likely culprit. We've ruled this out already - Roberto reproduces the issue without a bond. To me this looks like either a regression in the host side bridging. But otoh it doesn't look like it's happening always, because otherwise I'd expect more noise around this issue. - fabian Hard to say. E.g. forwarding delay would do this for a while. If eth address of the packets is okay, poke at the fbd, maybe there's something wrong there. Maybe stp is detecting a loop - try checking that. Someone is checking this ? In tested config SPT was off. Then maybe you have a loop :) That was already checked, the MAC was unique in the VLAN. RN Did you also try a reboot of the VM? We have the same issue with foreman and both Libvirt and oVirt. On second boot PXE boots properly from DHCP. Haven't had the time to investigate yet so we're using mostly image based provisioning on oVirt at the moment. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ovirt and Gluster
On 07/29/2015 02:24 PM, Joop wrote: On 29-7-2015 13:59, Jorick Astrego wrote: For RHEV I don't have an answer. But for anyone that cares, we've been running oVirt 3.5 and GlusterFS 3.6 for about three months in production now. We run a Gluster cluster and a seperate virtualization hosts cluster. The Gluster cluster is installed, configured and managed seperately from oVirt as there is no way to have a seperate storage network in oVirt 3.5 I run something comparable but using a split dns to get a separate storage network but also a storage cluster and virt cluster. The storage is managed through ovirt though because of the split-dns. There have been no specific incompatibility issues, so we are very happy. But as we don't use every feature mileage may vary. Question: do you use fuse mounts or libgfapi? I use libgfapi in test, using special vdsm packages and need to test if rebooting gluster nodes has an impact on running VMs. Select GlusterFS storage domain in oVirt isn't guaranteed to give you libgfapi! Joop It's production, so I'm using regular FUSE mounts. Although slower, it works at least with supported packages. We did spend some extra on hardware and are conservatively staying close to the Red Hat Storage hardware requirements. So that means RAID10 for now and a seperate SSD stroge volume. For our enterprise customers we are waiting for oVirt 3.6 and will spend even more on hardware (RDMA, Datacenter bridging, PCIe SSD's, etc) but we have to do a lot more testing before rolling it out. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Instability with Dell Compellent via iSCSI/Multipath
On 05/21/2015 02:47 AM, Chris Jones - BookIt.com Systems Administrator wrote: Another issue may be that the setting for COMPELNT/Compellent Vol are wrong; the setting we ship is missing lot of settings that exists in the builtin setting, and this may have bad effect. If your devices match this , I would try this multipath configuration, instead of the one vdsm configures. device { vendor COMPELNT product Compellent Vol path_grouping_policy multibus path_checker tur features 0 hardware_handler 0 prio const failback immediate rr_weight uniform no_path_retry fail } I wish I could. We're using the CentOS 7 ovirt-node-iso. The multipath.conf is less than ideal but when I tried updating it, oVirt instantly overwrites it. To be clear, yes I know changes do not survive reboots and yes I know about persist, but it changes it while running. Live! Persist won't help there. I also tried building a CentOS 7 thick client where I set up CentOS 7 first, added the oVirt repo, then let the engine provision it. Same problem with multipath.conf being overwritten with the default oVirt setup. So I tried to be slick about it. I made the multipath.conf immutable. That prevented the engine from being able to activate the node. It would fail on a vds command that gets the nodes capabilities and part of what it does is reads then overwrites multipath.conf. How do I safely update multipath.conf? Somehow the multipath.conf that oVirt generates forces my HDD RAID controller disks to change from /dev/sdb* and /dev/sdc*. So I had to blacklist these. I was able to persist it by adding # RHEV PRIVATE right below the # RHEV REVISION 1.1 Hope this helps Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ANN] oVirt 3.6.0 First Alpha Release is now available for testing
On 05/20/2015 04:18 PM, Sandro Bonazzola wrote: The oVirt Project is pleased to announce the availability of the first Alpha release of oVirt 3.6 for testing, as of May 20, 2015. oVirt is an open source alternative to VMware vSphere, and provides an excellent KVM management interface for multi-node virtualization. The Alpha release is available now for Fedora 20, Red Hat Enterprise Linux 6.6, CentOS 6.6 (or similar) and Red Hat Enterprise Linux 7.1, CentOS 7.1 (or similar). The Alpha release can also be deployed on Hypervisor Hosts running Fedora 21 and Fedora 22. This Alpha release of oVirt includes numerous bug fixes. See the release notes [1] for an initial list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. A new oVirt Live ISO and Node ISO will be available soon[2]. Please note that mirrors[3] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.6_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/ [3] http://www.ovirt.org/Repository_mirrors#Current_mirrors I get a dependency error upgrading allinone on CentOS 6.6 x86_64: Error: Package: ovirt-engine-setup-plugin-allinone-3.6.0-0.0.master.20150519172219.git9a2e2b3.el6.noarch (ovirt-3.6) Requires: ovirt-host-deploy-offline = 1.4.0 Installed: ovirt-host-deploy-offline-1.3.1-1.el6.x86_64 (@ovirt-3.5) ovirt-host-deploy-offline = 1.3.1-1.el6 Available: ovirt-host-deploy-offline-1.3.0-1.el6.i686 (ovirt-3.5) ovirt-host-deploy-offline = 1.3.0-1.el6 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Checked the repo and only see this package in the ovirt-3.5 repo yum -v search ovirt-host-deploy-offline == N/S Matched: ovirt-host-deploy-offline === ovirt-host-deploy-offline.i686 : oVirt host deploy tool offline settings Repo: ovirt-3.5 Matched from: ovirt-host-deploy-offline.x86_64 : oVirt host deploy tool offline settings Repo: ovirt-3.5 Matched from: Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] using Network_Custom_Properties for firewalld zone?
Hi, Trying to add the ZONE field to the NIC's in oVirt as I'm trying to use Firewalld instead of iptables. Manually it works fine but when I try to set a custom property, it doesn't apply. http://www.ovirt.org/Features/Network_Custom_Properties I can't figure out if this should work or I should use a different method. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Physical network on New Logical Network dialog
Hi, When I try to create a new logical network on our neutron provider, there is a field for Physical Network Export Create on external provider External Provider Physical Network What should I specify? The bond or the bridge of the host? I searched the documentation but can't find any info. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] GetGlusterVolumeAdvancedDetailsQuery GetGlusterVolumeProfileInfoQuery when using seperate storage network
On 05/06/2015 08:15 PM, knarra wrote: On 05/06/2015 11:22 PM, Jorick Astrego wrote: On 05/06/2015 06:24 PM, knarra wrote: On 05/06/2015 06:59 PM, Jorick Astrego wrote: On 05/06/2015 02:49 PM, knarra wrote: On 05/06/2015 05:33 PM, Jorick Astrego wrote: Hi, Looking forward to bz 1049994Allow choosing network interface for gluster domain traffic. Currently I have the bricks on a different storage network and can't get the volume details or profile it. Will this be handled in 3.6 properly? I don't see any changes in gerrit regarding this, but I can be ovelooking it. The errors I get currently: Could not fetch brick profile stats 2015-05-06 10:34:22,430 ERROR [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeProfileInfoQuery] (ajp--127.0.0.1-8702-27) Query GetGlusterVolumeProfileInfoQuery failed. Exception message is null : java.lang.NullPointerException: java.lang.NullPointerException and Error in fetching the brick details, please try again. 2015-05-06 10:36:14,205 ERROR [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeAdvancedDetailsQuery] (ajp--127.0.0.1-8702-55) Query GetGlusterVolumeAdvancedDetailsQuery failed. Exception message is VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157) : org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157): org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157) Met vriendelijke groet, With kind regards, Jorick Astrego* Netbulae Virtualization Experts * Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hi, Can you please check what does your gluster peer status on each of your nodes return? I guess they are in disconnected state and that is the reason you are not able to view these details. Thanks kasturi On the nodes it gives me the following: gluster peer status Connection failed. Please check if gluster daemon is operational. This means that glusterd is not running on this node. you could check the status of glusterd by running the command 'service glusterd status'. please start glusterd by running the command 'service glusterd start' on both of your nodes. Ideally when glusterd goes down node in ovirt should move to non-operational. Because of this BZ 1207150 as of now it is not changing the state to non operational. There is no glusterd on the compute nodes in our setup, we have two clusters. One for virt hosts only and one for GlusterFS only. Like I said, everything is Up and running fine. It's just that I can't get the stats because the hostname != GlusterFS NIC ip But everyting is up and ovirt found the manually configured volume perfectly. But the hostname it lists as glustertest1.netbulae.test is not what my volume uses for communication as I created the volume using the ip's of the storage network. gluster peer status Number of Peers: 2 Hostname: 10.1.1.3 Uuid: 1cc0875e-1699-42ae-aed2-9152667ed5af State: Peer in Cluster (Connected) Hostname: 10.1.1.2 Uuid: a0b3ac13-7388-441a-a238-1deb023cab6c State: Peer in Cluster (Connected) Did you import already existing cluster ? No, I provisioned the nodes. Added them to our glusterfs cluster (with virt service disabled) and created the volume manually. oVirt auto-discovered the manual created volume after that. Error: No brick *glustertest1.netbulae.test*:/gluster/brick1 in volume data Hostname: *10.1.1.3* Things should work better in 3.6 (bz1049994), but I don't
[ovirt-users] GetGlusterVolumeAdvancedDetailsQuery GetGlusterVolumeProfileInfoQuery when using seperate storage network
Hi, Looking forward to bz 1049994Allow choosing network interface for gluster domain traffic. Currently I have the bricks on a different storage network and can't get the volume details or profile it. Will this be handled in 3.6 properly? I don't see any changes in gerrit regarding this, but I can be ovelooking it. The errors I get currently: Could not fetch brick profile stats 2015-05-06 10:34:22,430 ERROR [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeProfileInfoQuery] (ajp--127.0.0.1-8702-27) Query GetGlusterVolumeProfileInfoQuery failed. Exception message is null : java.lang.NullPointerException: java.lang.NullPointerException and Error in fetching the brick details, please try again. 2015-05-06 10:36:14,205 ERROR [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeAdvancedDetailsQuery] (ajp--127.0.0.1-8702-55) Query GetGlusterVolumeAdvancedDetailsQuery failed. Exception message is VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157) : org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157): org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157) Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] GetGlusterVolumeAdvancedDetailsQuery GetGlusterVolumeProfileInfoQuery when using seperate storage network
On 05/06/2015 06:24 PM, knarra wrote: On 05/06/2015 06:59 PM, Jorick Astrego wrote: On 05/06/2015 02:49 PM, knarra wrote: On 05/06/2015 05:33 PM, Jorick Astrego wrote: Hi, Looking forward to bz 1049994Allow choosing network interface for gluster domain traffic. Currently I have the bricks on a different storage network and can't get the volume details or profile it. Will this be handled in 3.6 properly? I don't see any changes in gerrit regarding this, but I can be ovelooking it. The errors I get currently: Could not fetch brick profile stats 2015-05-06 10:34:22,430 ERROR [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeProfileInfoQuery] (ajp--127.0.0.1-8702-27) Query GetGlusterVolumeProfileInfoQuery failed. Exception message is null : java.lang.NullPointerException: java.lang.NullPointerException and Error in fetching the brick details, please try again. 2015-05-06 10:36:14,205 ERROR [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeAdvancedDetailsQuery] (ajp--127.0.0.1-8702-55) Query GetGlusterVolumeAdvancedDetailsQuery failed. Exception message is VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157) : org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157): org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: Volume status failed error: Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data Staging failed on *.*.*.*. Error: No brick glustertest1.netbulae.test:/gluster/brick1 in volume data return code: -1 (Failed with error GlusterVolumeStatusFailed and code 4157) Met vriendelijke groet, With kind regards, Jorick Astrego* Netbulae Virtualization Experts * Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hi, Can you please check what does your gluster peer status on each of your nodes return? I guess they are in disconnected state and that is the reason you are not able to view these details. Thanks kasturi On the nodes it gives me the following: gluster peer status Connection failed. Please check if gluster daemon is operational. This means that glusterd is not running on this node. you could check the status of glusterd by running the command 'service glusterd status'. please start glusterd by running the command 'service glusterd start' on both of your nodes. Ideally when glusterd goes down node in ovirt should move to non-operational. Because of this BZ 1207150 as of now it is not changing the state to non operational. There is no glusterd on the compute nodes in our setup, we have two clusters. One for virt hosts only and one for GlusterFS only. Like I said, everything is Up and running fine. It's just that I can't get the stats because the hostname != GlusterFS NIC ip But everyting is up and ovirt found the manually configured volume perfectly. But the hostname it lists as glustertest1.netbulae.test is not what my volume uses for communication as I created the volume using the ip's of the storage network. gluster peer status Number of Peers: 2 Hostname: 10.1.1.3 Uuid: 1cc0875e-1699-42ae-aed2-9152667ed5af State: Peer in Cluster (Connected) Hostname: 10.1.1.2 Uuid: a0b3ac13-7388-441a-a238-1deb023cab6c State: Peer in Cluster (Connected) Did you import already existing cluster ? No, I provisioned the nodes. Added them to our glusterfs cluster (with virt service disabled) and created the volume manually. oVirt auto-discovered the manual created volume after that. Error: No brick *glustertest1.netbulae.test*:/gluster/brick1 in volume data Hostname: *10.1.1.3* Things should work better in 3.6 (bz1049994), but I don't see any code changes to GetGlusterVolumeProfileInfoQuery linked to this in Bugzilla. Met
Re: [ovirt-users] Finished installing, when creating new VM, the fields are grayed out
On 05/05/2015 10:20 AM, John Joseph wrote: Dear All, Very much new to oVirt, just finished installing Ovirt on CentOS 6.6 after login as admin, I straight went to create new VM machine, but fields to enter are all greyed(ie not able to enter the value). I have attached a screen shot for reference Guidance and advice requested Thanks Joseph John Hi, In the screenshot I can see the warning at the bottom Not available when no datacenter is up, so I think you skipped some steps ;-) Try reading this: http://www.ovirt.org/Quick_Start_Guide#Configure_Data_Centers Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] neutron subnet problems
Caused by: java.lang.IllegalArgumentException: Parameter #0 type for factory method ([method valueOf, annotations: {interface org.codehaus.jackson.annotate.JsonCreator=@org.codehaus.jackson.annotate.JsonCreator()}]) not suitable, must be java.lang.String at org.codehaus.jackson.map.deser.std.EnumDeserializer.deserializerForCreator(EnumDeserializer.java:49) [jackson-mapper-asl-1.9.2.jar:1.9.2] at org.codehaus.jackson.map.deser.BasicDeserializerFactory.createEnumDeserializer(BasicDeserializerFactory.java:495) [jackson-mapper-asl-1.9.2.jar:1.9.2] at org.codehaus.jackson.map.deser.StdDeserializerProvider._createDeserializer(StdDeserializerProvider.java:401) [jackson-mapper-asl-1.9.2.jar:1.9.2] at org.codehaus.jackson.map.deser.StdDeserializerProvider._createAndCache2(StdDeserializerProvider.java:341) [jackson-mapper-asl-1.9.2.jar:1.9.2] ... 143 more Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] removing neutron networks
Hi, After my update to 3.5.2 final, I started messing about with the Neutron integration again. I created and removed several networks but the list keeps adding each new network when I use import, the old ones still remain. 2015-04-29 17:28:21,293 INFO [org.ovirt.engine.core.bll.network.dc.RemoveNetworkCommand] (org.ovirt.thread.pool-8-thread-45) [58f7886b] Running command: RemoveNetworkCommand internal: false. Entities affected : ID: 4526582c-eef6-4562-97ad-facdf4590356 Type: NetworkAction group CONFIGURE_STORAGE_POOL_NETWORK with role type ADMIN 2015-04-29 17:28:21,545 ERROR [org.ovirt.engine.core.bll.network.dc.RemoveNetworkCommand] (org.ovirt.thread.pool-8-thread-45) [58f7886b] Command org.ovirt.engine.core.bll.network.dc.RemoveNetworkCommand throw Vdc Bll exception. With error message VdcBLLException: (Failed with error PROVIDER_FAILURE and code 5050) 2015-04-29 17:28:21,548 INFO [org.ovirt.engine.core.bll.network.dc.RemoveNetworkCommand] (org.ovirt.thread.pool-8-thread-45) [58f7886b] Command [id=163db1a8-d281-43e7-8bc1-a5229ffe4555]: Compensating DELETED_OR_UPDATED_ENTITY of org.ovirt.engine.core.common.businessentities.network.Network; snapshot: id=4526582c-eef6-4562-97ad-facdf4590356. 2015-04-29 17:28:21,598 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread-45) [58f7886b] Correlation ID: 58f7886b, Call Stack: null, Custom Event ID: -1, Message: Failed to remove Network EN_uplink from Data Center: Netbulae And in neutron server.log: 2015-04-29 19:28:23.347 1027 INFO neutron.api.v2.resource [req-44768a7f-7443-4da7-b162-c91b3f8d78d3 None] delete failed (client error): Network 36a7a012-d94c-4a0f-b369-47d1d04f5942 could not be found When I check in Neutron, there are only two listed. neutron net-list +--+-+---+ | id | name| subnets | +--+-+---+ | 66ef5f7f-b0d1-4ef9-8b5e-d7a7aa315d58 | public | 37ea25da-68a1-478b-ab30-8cf6ad104ccb ***.***.***.**/26 | | 5e90abfb-19c1-4b09-b387-8f2b815cad30 | private | 60f29e92-5461-4eba-a375-4016bc4c6f39 172.17.0.0/24| +--+-+---+ So it appears oVirt doesn't handle things correctly when I remove the networks from neutron directly. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.5 problem with gluster, can't set the group and can't find ovirt packages
On 04/22/2015 02:45 PM, Lars Nielsen wrote: Hey again I keep getting this still: Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory Still no luck after reinstall - Lars On 19/04/15 18:05, Lars Nielsen wrote: Hey Will try it. Thank you very much - Lars On 19 Apr 2015, at 12:35, Bernd Broermann be...@broermann.com wrote: Hi, I saw the same behavior in past. I solved it by reinstall glusterfs-server package. rpm -qf /var/lib/glusterd/groups/virt glusterfs-server-3.6.2-1.el7.x86_64 yum reinstall glusterfs-server Might fix it you also. Bernd Am 17.04.2015 um 19:52 schrieb Lars Nielsen: Hey again :) I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and using gluster following this guide: http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ However when I run the install command: yum install -y ovirt-hosted-engine-setup I get the output: No package overt-hosted-engine-setup available Error nothing to do. But I have run: yum localinstall -y http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm I get no error, and I have checked the log files. And when I run this command: gluster volume set engine group virt I get this output: Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No such file or directory Hope some one can help. Thanks in advance - Lars Nielsen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Bernd Broermann Wellingsbütteler Landstr. 241 22337 Hamburg 0172/2982498 040/5370 http://www.broermann.com RHCE - Redhat Certified Engineer Hi, I think this is this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1129592 Netbulae mailto:i...@netbulae.com 2014-08-14 05:50:15 EDT I just read something about this in the following article: http://blog.gluster.org/2014/05/ovirt-3-4-glusterized/ Create a file named `/var/lib/glusterd/groups/virt' and paste in the lines below. This provides a virt group with settings optimized for VM storage. I've left off two quorum-related options present in the original group definition. These quorum settings help prevent split-brain, but will cause VMs hosted on Gluster volumes with the settings applied to pause when one of our two machines goes offline. quick-read=off read-ahead=off io-cache=off stat-prefetch=off eager-lock=enable remote-dio=enable Next, we'll add our new engine volume to this virt group: gluster volume set engine group virt I never createde the virt file and it's not in this directory. Can it be auto created on setup? Forgot to add these for cluster 2 nodes: quorum-type=auto server-quorum-type=server As per https://github.com/gluster/glusterfs/blob/master/extras/group-virt.example Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding interfaces
On 04/16/2015 09:49 PM, Bill Dossett wrote: Hi, I had a Gluster Cluster running that I setup with oVirt engine… “had” being the operative word here. Today I connected the second network interface and then went to the host and tried to bond this interface to the ovirt mgmt. network… this is where the “had” part comes in ;-) Now I have no working interfaces at all, can’t ping in or out and all interfaces say they are down, en1, 2, ovrtmgmt and bond0 when I do an ip add (this is centos7) I have done this quite a few times on RHEV clusters and it always worked well, very impressed with it. The differences are… RHEV cluster I was using trunked ports and VLANS RHEV I was using 6.4 or 6.5 RHEL I think that’s it. I haven’t really dug into the /etc/sysconfig/network-scripts to see what normally goes into the config files to create a bonded interface – only to see how to configure my first interface with a vlan and then I let ovirtengine do the rest for me as it worked so wellI I guess I may have to rip it out and start over unless anyone has any tips on fixing it. It’s just PoC anyway, so learning. Thanks Which version of ovirt do you run? We had some of these problems in test before, but since 3.5.2rc3 and CentOS 7.1 the problem has been resolved for us. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Datacenter unresponsive: recovery procedure?
On 04/16/2015 11:12 AM, Andrea Ghelardi wrote: (sorry: resending as I wasn’t part of the list, yet) hi, this is my first post so hallo all and thank you for reading. I have an issue with my production Ovirt environment (3.5.1.1-1.el6). My system consists of several datancers. 2 of them are connected to an iSCSI SAN and they were working fine. Until the moment I had the bad idea of deleting a SAN volume from the SAN manager before deleting the associated storage on Ovirt. From that moment, the DC where this storage was mounted became not responsive: it cannot attach the master storage (or any other). I tried to 1) manually destroy the offending storage (select - destroy) but still cannot recover the situation. 2) right click on master storage and activate it 3) re-initialize the datacenter using a NFS storage from the working sister DC. All Hosts are still running even though their status is unknown. All VM are still running even though their status is not responding. I half resolved the issue by manually restarting the host where the datastore was originally mounted. This cleared the orphaned multipath. However, the SPM does not come up still. This is an extract of the log /2015-04-16 03:51:48,069 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (DefaultQuartzScheduler_Worker-14) [61a44b19] could not stop spm of pool *0002-0002-0002-0002-009c*on vds *89254f23-8748-402a-afc9-08438dca0975*- reason: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: VDSGenericException: VDSNetworkException: Message timeout which can be caused by communication issues/ /2015-04-16 03:51:48,072 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (DefaultQuartzScheduler_Worker-14) [61a44b19] FINISH, SpmStopVDSCommand, log id: 4354cf46/ /2015-04-16 03:51:48,072 WARN [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData] (DefaultQuartzScheduler_Worker-14) [61a44b19] spm stop on spm failed, stopping spm selection!/ /2015-04-16 03:51:58,223 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData] (DefaultQuartzScheduler_Worker-4) [4ca2d938] hostFromVds::selectedVds - Brachetto, spmStatus Free, storage pool IRDC-INTEL/ /2015-04-16 03:51:58,225 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData] (DefaultQuartzScheduler_Worker-4) [4ca2d938] SPM Init: could not find reported vds or not up - pool:IRDC-INTEL vds_spm_id: 3/ /2015-04-16 03:51:58,239 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData] (DefaultQuartzScheduler_Worker-4) [4ca2d938] SPM selection - vds seems as spm sovana/ /2015-04-16 03:51:58,252 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (DefaultQuartzScheduler_Worker-4) [4ca2d938] START, SpmStopVDSCommand(HostName = sovana, HostId = 89254f23-8748-402a-afc9-08438dca0975, storagePoolId = 0002-0002-0002-0002-009c), log id: 63a17687/ storagePoolId = 0002-0002-0002-0002-009c is (was) hertz-dstore2 which does not exists anymore on SAN adn ovirt hostid 89254f23-8748-402a-afc9-08438dca0975 is sovana server (current SPM) I’m thinking about /Put the hosted engine host into Maintenance/// /Shutdown Ovirt Manager/// /Rebooted SPM server/// /Restarted Ovirt Manager/// /Took hosted engine host out of Maintenance/// any help or clue is highly welcomed with cheers and beers thank you! I had comparable issues nearly a year ago after a failed iSCSI failover that ended in a split brain. Wasn't able to recover from it. https://bugzilla.redhat.com/show_bug.cgi?id=1108576 Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] cdrom not working
On 04/15/2015 02:45 PM, Michal Skrivanek wrote: On Apr 14, 2015, at 12:47 , Jorick Astrego j.astr...@netbulae.eu wrote: Hi, Normally we use foreman to provision vm's but I am testing with the user interface on 3.5.2rc3 . I uploaded an CentOS iso and attached it to the cdrom. I then got a no boot device error. does it behave the same via Run Once? Can you get the libvirt.xml (e.g. from vdsm.log and any error there?) Yes same with run-once The only error I can find is: Thread-317438::DEBUG::2015-04-16 13:23:06,436::libvirtconnection::143::root::(wrapper) Unknown libvirterror: ecode: 80 edom: 20 level: 2 message: metadata not found: Requested metadata element is not present vdsm.log: Thread-317445::DEBUG::2015-04-16 13:22:57,497::task::993::Storage.TaskManager.Task::(_decref) Task=`5bad619b-3a0b-4ab8-b617-f60dcde16bbc`::ref 0 aborting False Thread-317445::DEBUG::2015-04-16 13:22:57,497::__init__::500::jsonrpc.JsonRpcServer::(_serveRequest) Return 'StoragePool.getInfo' in bridge with {'info': {'name': 'No Description', 'isoprefix': u'/rhev/data-center/mnt/ovirt.netbulae.test:_var_lib_exports_iso/e1f7c360-9bfe-4349-a9d3-bf8526c2db11/images/----', 'pool_status': 'connected', 'lver': 6L, 'domains': u'f166643e-4049-4ab3-b633-17ff39116f1d:Active,e1f7c360-9bfe-4349-a9d3-bf8526c2db11:Active', 'master_uuid': u'f166643e-4049-4ab3-b633-17ff39116f1d', 'version': '3', 'spm_id': 3, 'type': 'GLUSTERFS', 'master_ver': 1}, 'dominfo': {u'f166643e-4049-4ab3-b633-17ff39116f1d': {'status': u'Active', 'diskfree': '1589585117184', 'isoprefix': '', 'alerts': [], 'disktotal': '1609826304000', 'version': 3}, u'e1f7c360-9bfe-4349-a9d3-bf8526c2db11': {'status': u'Active', 'diskfree': '31935430656', 'isoprefix': u'/rhev/data-center/mnt/ovirt.netbulae.test:_var_lib_exports_iso/e1f7c360-9bfe-4349-a9d3-bf8526c2db11/images/----', 'alerts': [], 'disktotal': '46905950208', 'version': 0}}} Thread-317445::DEBUG::2015-04-16 13:22:57,498::stompReactor::163::yajsonrpc.StompServer::(send) Sending response Dummy-2538::DEBUG::2015-04-16 13:22:58,712::storage_mailbox::731::Storage.Misc.excCmd::(_checkForMail) dd if=/rhev/data-center/0002-0002-0002-0002-03b3/mastersd/dom_md/inbox iflag=direct,fullblock count=1 bs=1024000 (cwd None) Dummy-2538::DEBUG::2015-04-16 13:22:58,729::storage_mailbox::731::Storage.Misc.excCmd::(_checkForMail) SUCCESS: err = '1+0 records in\n1+0 records out\n1024000 bytes (1.0 MB) copied, 0.00275825 s, 371 MB/s\n'; rc = 0 JsonRpc (StompReactor)::DEBUG::2015-04-16 13:22:59,375::stompReactor::98::Broker.StompAdapter::(handle_frame) Handling message StompFrame command='SEND' JsonRpcServer::DEBUG::2015-04-16 13:22:59,376::__init__::506::jsonrpc.JsonRpcServer::(serve_requests) Waiting for request Thread-317446::DEBUG::2015-04-16 13:22:59,378::task::595::Storage.TaskManager.Task::(_updateState) Task=`aa4e9fef-8ac8-4c2a-b536-57b1ad94a5b2`::moving from state init - state preparing Thread-317446::INFO::2015-04-16 13:22:59,378::logUtils::44::dispatcher::(wrapper) Run and protect: repoStats(options=None) Thread-317446::INFO::2015-04-16 13:22:59,379::logUtils::47::dispatcher::(wrapper) Run and protect: repoStats, Return response: {u'f166643e-4049-4ab3-b633-17ff39116f1d': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.00055801', 'lastCheck': '4.1', 'valid': True}, u'e1f7c360-9bfe-4349-a9d3-bf8526c2db11': {'code': 0, 'version': 0, 'acquired': True, 'delay': '0.000801236', 'lastCheck': '8.4', 'valid': True}} Thread-317446::DEBUG::2015-04-16 13:22:59,379::task::1191::Storage.TaskManager.Task::(prepare) Task=`aa4e9fef-8ac8-4c2a-b536-57b1ad94a5b2`::finished: {u'f166643e-4049-4ab3-b633-17ff39116f1d': {'code': 0, 'version': 3, 'acquired': True, 'delay': '0.00055801', 'lastCheck': '4.1', 'valid': True}, u'e1f7c360-9bfe-4349-a9d3-bf8526c2db11': {'code': 0, 'version': 0, 'acquired': True, 'delay': '0.000801236', 'lastCheck': '8.4', 'valid': True}} Thread-317446::DEBUG::2015-04-16 13:22:59,379::task::595::Storage.TaskManager.Task::(_updateState) Task=`aa4e9fef-8ac8-4c2a-b536-57b1ad94a5b2`::moving from state preparing - state finished Thread-317446::DEBUG::2015-04-16 13:22:59,379::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources {} Thread-317446::DEBUG::2015-04-16 13:22:59,379::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {} Thread-317446::DEBUG::2015-04-16 13:22:59,379::task::993::Storage.TaskManager.Task::(_decref) Task=`aa4e9fef-8ac8-4c2a-b536-57b1ad94a5b2`::ref 0 aborting False Thread-317446::DEBUG::2015-04-16 13:22:59,381
Re: [ovirt-users] Disable admin@internal account
On 04/15/2015 12:08 PM, Николаев Алексей wrote: Hi community! The Red_Hat_Enterprise_Virtualization-3.5-Administration_Guide says how to add users from external directory. But now i want to disable admin@internal mailto:admin@internal account for security reasons and use it only for disaster recovery situations (or then ldaps servers not available). Can i do it? What are best practises for use only external directory? If i delete admin@internal mailto:admin@internal account can i add it again? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Should be possible last time I asked, see response below: Subject:Re: [ovirt-users] oVirt 3.5 and FreeIpa Date: Thu, 22 Jan 2015 06:59:52 -0500 (EST) From: Alon Bar-Lev alo...@redhat.com To: Jorick Astrego j.astr...@netbulae.eu CC: users@ovirt.org snip Also can we get rid of the internal admin or better just disable internal authenticationt without problems? As we have ipa we don't want local login enabled, but in emergency situations we might need to turn it on quickly. Yes, you can disable the internal by creating /etc/ovirt-engine/engine.conf.d/50-disable-internal.conf --- ENGINE_EXTENSION_ENABLED_builtin-authn-internal = false --- Hmmm we have a bug in this case... will fix, so let's just disable the authz for now. --- ENGINE_EXTENSION_ENABLED_internal = false Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] iSCSI interface to GlusterFS cluster
On 04/12/2015 05:24 PM, Bill Dossett wrote: Hi, Not sure if this can be done using ovirt engine or if I have to do this more at the GlusterFS command level. I have set up a Gluster enabled Cluster with a Volume which is working fine…. I can mount it using the filesystem thype glusterfs. While I am going to test this with Ovirt and VMs eventually. I am currently exploring using the cluster as an iSCSI target and if that is possible to configure thru ovirt or if I now need to work more at the Gluster command level and don’t get to use the nice UI to configure this. Any pointers to what I should read next about this would be appreiciated. Thanks *Bill Dossett* Systems Architect *Tech Central – Global Engineering Services* *T* +1 303 440 3523 *M* +44 (0)777 590 8612 bill.doss...@pb.com mailto:bill.doss...@pb.com pitneybowes.com http://pitneybowes.com/ *Pitney Bowes* 4750 Walnut Street | Boulder, Colorado, 80301 | USA No oVirt doesn't support using the GlusterFS cluster as iSCSI target as it supports glusterfs native. So you won't get any GUI support from ovirt.. There has been some work done on using GlusterFS in their own community http://blog.gluster.org/2013/12/libgfapi-and-the-linux-target-driver/ . But it appears to have stalled a bit https://forge.gluster.org/gfapi-module-for-linux-target-driver- Head over to the glusterfs mailinglist for more info. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt-guest-agent outdated?
On 04/09/2015 10:12 AM, Sandro Bonazzola wrote: Il 09/04/2015 10:03, Vinzenz Feenstra ha scritto: On 04/09/2015 09:55 AM, Jorick Astrego wrote: On 04/09/2015 08:56 AM, Vinzenz Feenstra wrote: On 04/08/2015 04:34 PM, Jorick Astrego wrote: Hi, Hi, Testing 3.5.2rc3, I see AVC denied messages for the ovrit-guest agent (installed through cloud-init). type=AVC msg=audit(1428510418.333:142): avc: denied { read } for pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23 scontext=system_u:system_r:rhev_agentd_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file type=AVC msg=audit(1428510418.333:142): avc: denied { open } for pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23 scontext=system_u:system_r:rhev_agentd_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file type=SYSCALL msg=audit(1428510418.333:142): arch=c03e syscall=2 success=yes exit=6 a0=7f8a655612b8 a1=8 a2=2803ff a3=0 items=0 ppid=1 pid=1113 auid=4294967295 uid=175 gid=175 euid=175 suid=175 fsuid=175 egid=175 sgid=175 fsgid=175 tty=(none) ses=4294967295 comm=ovirt-guest-age exe=/usr/bin/python subj=system_u:system_r:rhev_agentd_t:s0 key=(null) And when I check the rpm I see: rpm -qa|grep ovirt ovirt-release-el6-10.0.1-3.noarch ovirt-guest-agent-1.0.8-1.el6.noarch Well the latest guest agent is always available on epel for el5/6/7 and for fedora in the fedora repos I am not sure why it's not available in the public ovirt repositories, however that was somehow always a problem with ovirt releases, but I recommend anyway to use epel for the ovirt guest agent due to the fact that I am releasing the guest agent always to epel and it will get updated from there. Please also note that the repo location has changed. ovirt-3.5 for el6 is now here: http://resources.ovirt.org/pub/ovirt-3.5/rpm/el6/ However what I don't know, is how the 3.3.3 repository got installed for you, I am not sure that this was done by the bare 'cloud-init', that might be specific to your cloud init configuration. Well that can't be specific. I completely wipe the test environment every couple weeks and just provisioned a completely fresh ovirt 3.5.2rc3 install. Normally I don't use cloud-init as we have foreman, but I was testing it. The only thing I did was, create new VM and checked the cloud-init/sysprep checkbox. The rest oVirt did automatically. What I think is happening is that the CentOS 6.5 image in the ovirt-image-repository glance provider is outdated. I used this as template for quick testing. Does anyone know who maintains these images? Sandro, do you by any chance know who does? Nobody maintains actively the images in the glance repository. I raised the issue a while ago[1] and proposed as get involved task to provide updated images[2] for the glance repository. Once new images will be available, Oved can upload them into the glance repository. [1] http://lists.ovirt.org/pipermail/devel/2015-April/010193.html [2] http://lists.ovirt.org/pipermail/devel/2015-April/010199.html Ok, I will schedule some time to update them as I had been planning to get involved some more ;-) Will upload somewhere next week. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt-guest-agent outdated?
On 04/09/2015 08:56 AM, Vinzenz Feenstra wrote: On 04/08/2015 04:34 PM, Jorick Astrego wrote: Hi, Hi, Testing 3.5.2rc3, I see AVC denied messages for the ovrit-guest agent (installed through cloud-init). type=AVC msg=audit(1428510418.333:142): avc: denied { read } for pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23 scontext=system_u:system_r:rhev_agentd_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file type=AVC msg=audit(1428510418.333:142): avc: denied { open } for pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23 scontext=system_u:system_r:rhev_agentd_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file type=SYSCALL msg=audit(1428510418.333:142): arch=c03e syscall=2 success=yes exit=6 a0=7f8a655612b8 a1=8 a2=2803ff a3=0 items=0 ppid=1 pid=1113 auid=4294967295 uid=175 gid=175 euid=175 suid=175 fsuid=175 egid=175 sgid=175 fsgid=175 tty=(none) ses=4294967295 comm=ovirt-guest-age exe=/usr/bin/python subj=system_u:system_r:rhev_agentd_t:s0 key=(null) And when I check the rpm I see: rpm -qa|grep ovirt ovirt-release-el6-10.0.1-3.noarch ovirt-guest-agent-1.0.8-1.el6.noarch Well the latest guest agent is always available on epel for el5/6/7 and for fedora in the fedora repos I am not sure why it's not available in the public ovirt repositories, however that was somehow always a problem with ovirt releases, but I recommend anyway to use epel for the ovirt guest agent due to the fact that I am releasing the guest agent always to epel and it will get updated from there. Please also note that the repo location has changed. ovirt-3.5 for el6 is now here: http://resources.ovirt.org/pub/ovirt-3.5/rpm/el6/ However what I don't know, is how the 3.3.3 repository got installed for you, I am not sure that this was done by the bare 'cloud-init', that might be specific to your cloud init configuration. Well that can't be specific. I completely wipe the test environment every couple weeks and just provisioned a completely fresh ovirt 3.5.2rc3 install. Normally I don't use cloud-init as we have foreman, but I was testing it. The only thing I did was, create new VM and checked the cloud-init/sysprep checkbox. The rest oVirt did automatically. What I think is happening is that the CentOS 6.5 image in the ovirt-image-repository glance provider is outdated. I used this as template for quick testing. Does anyone know who maintains these images? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt-guest-agent outdated?
Hi, Testing 3.5.2rc3, I see AVC denied messages for the ovrit-guest agent (installed through cloud-init). type=AVC msg=audit(1428510418.333:142): avc: denied { read } for pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23 scontext=system_u:system_r:rhev_agentd_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file type=AVC msg=audit(1428510418.333:142): avc: denied { open } for pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23 scontext=system_u:system_r:rhev_agentd_t:s0 tcontext=system_u:object_r:sysfs_t:s0 tclass=file type=SYSCALL msg=audit(1428510418.333:142): arch=c03e syscall=2 success=yes exit=6 a0=7f8a655612b8 a1=8 a2=2803ff a3=0 items=0 ppid=1 pid=1113 auid=4294967295 uid=175 gid=175 euid=175 suid=175 fsuid=175 egid=175 sgid=175 fsgid=175 tty=(none) ses=4294967295 comm=ovirt-guest-age exe=/usr/bin/python subj=system_u:system_r:rhev_agentd_t:s0 key=(null) And when I check the rpm I see: rpm -qa|grep ovirt ovirt-release-el6-10.0.1-3.noarch ovirt-guest-agent-1.0.8-1.el6.noarch Then I checked the cloud-init installed /etc/yum.repos.d/el6-ovirt.repo and see version 3.3.3 is active. Shouldn't this be updated to 3.5.* [ovirt-stable] name=Older Stable builds of the oVirt project baseurl=http://ovirt.org/releases/stable/rpm/EL/$releasever/ enabled=1 skip_if_unavailable=1 gpgcheck=0 [ovirt-3.3.3] name=oVirt 3.3.3 release baseurl=http://resources.ovirt.org/releases/3.3.3/rpm/EL/$releasever/ enabled=1 skip_if_unavailable=1 gpgcheck=0 [ovirt-updates-testing] name=Test Updates builds of the oVirt project baseurl=http://ovirt.org/releases/updates-testing/rpm/EL/$releasever/ enabled=0 skip_if_unavailable=1 gpgcheck=0 [ovirt-beta] name=Beta builds of the oVirt project baseurl=http://ovirt.org/releases/beta/rpm/EL/$releasever/ enabled=0 skip_if_unavailable=1 gpgcheck=0 [ovirt-nightly] name=Nightly builds of the oVirt project baseurl=http://ovirt.org/releases/nightly/rpm/EL/$releasever/ enabled=0 skip_if_unavailable=1 gpgcheck=0 [ovirt-3.4.0-alpha] name=3.4.0 alpha testing repo for the oVirt project baseurl=http://ovirt.org/releases/3.4.0-alpha/rpm/EL/$releasever/ enabled=0 skip_if_unavailable=1 gpgcheck=0 [ovirt-3.4.0-prerelease] name=Pre release builds of the oVirt 3.4 project baseurl=http://resources.ovirt.org/releases/3.4.0_pre/rpm/EL/$releasever/ enabled=0 skip_if_unavailable=1 gpgcheck=0 Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] cloud-init root password?
On 04/07/2015 11:31 AM, Michal Skrivanek wrote: On Apr 3, 2015, at 13:07 , Jorick Astrego j.astr...@netbulae.eu wrote: Hi, On 3.5.2rc3, the root password field from cloud-init is missing. How do I set the root password now for a fresh VM? Hi Jorick, This was 3.5 enhancement to support also non-root users you use username root and set a password:-) Thanks, michal I normally deploy through foreman and we have ipa integrated, so I haven't used it in a while. When I use username root and set the password, how do I add another normal user then? Say I want to add an user account set the root password. When I fill in the username password there is no way to login to the system as this user and gain root access in any way (sudo is not allowed). So it could have just remained rootpw as the vm is worthless otherwise or am I missing something? Regards, Jorick Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] cloud-init root password?
On 04/07/2015 01:36 PM, Michal Skrivanek wrote: On Apr 7, 2015, at 13:24 , Jorick Astrego j.astr...@netbulae.eu wrote: On 04/07/2015 11:31 AM, Michal Skrivanek wrote: On Apr 3, 2015, at 13:07 , Jorick Astrego j.astr...@netbulae.eu wrote: Hi, On 3.5.2rc3, the root password field from cloud-init is missing. How do I set the root password now for a fresh VM? Hi Jorick, This was 3.5 enhancement to support also non-root users you use username root and set a password:-) Thanks, michal I normally deploy through foreman and we have ipa integrated, so I haven't used it in a while. When I use username root and set the password, how do I add another normal user then? you can only define one. It's not meant to be a guest user management tool. Ok so IMHO it's pretty useless. I thought it was comparable to anaconda where you specify the rootpw and an optional user. I expect many call's if we don't explain they have to use the username root. But we're building a custom customer front end anyway so we'll just fill in the root user ourselves I guess. Let's say a customer creates a new vm, add's a Centos iso to boot from and wishes the add a rootpw and admin user account, is there any way to do this currently? Say I want to add an user account set the root password. When I fill in the username password there is no way to login to the system as this user and gain root access in any way (sudo is not allowed). So it could have just remained rootpw as the vm is worthless otherwise or am I missing something? it was a specific request for cloud-based images. It only makes sense on templates where you've already initialized root or sudo If I create templates with initialized root or sudo, I wouldn't have any need to use cloud init to add another user. I could have done that in the template as well. Also the templates will become single user as it doesn't make sense to share the same root with multiple users. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] cloud-init root password?
On 04/07/2015 02:26 PM, Amedeo Salvati wrote: your mileage may vary! For example we use python api with cloud-init and template to reset root password (you can use for example command like this: openssl rand -hex 10) and to configure network / configuration files and freeipa... Michal, are you working with plain password or with salted hashed ones? I had some experiment on hosted-engine with strange results on that. try to use python api by passing: users=params.Users(user=[params.User(user_name=root, password=SPASSWORD)]) have a look at python example on http://www.ovirt.org/Features/Cloud-Init_Integration Best regards Amedeo Can this also be done with the REST-api? I see a users section in the example on http://www.ovirt.org/Features/Cloud-Init_Integration users user user_nameroot/user_name passwordmyPass/password /user /users Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VMs freezing during heals
: [811a0747] user_path_at+0x57/0xa0 Mar 12 23:05:16 static1 kernel: [a0204e74] ? _xfs_trans_commit+0x214/0x2a0 [xfs] Mar 12 23:05:16 static1 kernel: [a01eae3e] ? xfs_iunlock+0x7e/0xd0 [xfs] Mar 12 23:05:16 static1 kernel: [81193bc0] vfs_fstatat+0x50/0xa0 Mar 12 23:05:16 static1 kernel: [811aaf5d] ? touch_atime+0x14d/0x1a0 Mar 12 23:05:16 static1 kernel: [81193d3b] vfs_stat+0x1b/0x20 Mar 12 23:05:16 static1 kernel: [81193d64] sys_newstat+0x24/0x50 Mar 12 23:05:16 static1 kernel: [810e5c87] ? audit_syscall_entry+0x1d7/0x200 Mar 12 23:05:16 static1 kernel: [810e5a7e] ? __audit_syscall_exit+0x25e/0x290 Mar 12 23:05:16 static1 kernel: [8100b072] system_call_fastpath+0x16/0x1b I am wondering if my volume settings are causing this. Can anyone with more knowledge take a look and let me know: network.remote-dio: on performance.stat-prefetch: off performance.io-cache: off performance.read-ahead: off performance.quick-read: off nfs.export-volumes: on network.ping-timeout: 20 cluster.self-heal-readdir-size: 64KB cluster.quorum-type: auto cluster.data-self-heal-algorithm: diff cluster.self-heal-window-size: 8 cluster.heal-timeout: 500 cluster.self-heal-daemon: on cluster.entry-self-heal: on cluster.data-self-heal: on cluster.metadata-self-heal: on cluster.readdir-optimize: on cluster.background-self-heal-count: 20 cluster.rebalance-stats: on cluster.min-free-disk: 5% cluster.eager-lock: enable storage.owner-uid: 36 storage.owner-gid: 36 auth.allow:* user.cifs: disable cluster.server-quorum-ratio: 51% Many Thanks, Alastair ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] postgresql error on glance image repo
) at org.ovirt.engine.core.aaa.filters.SessionValidationFilter.doFilter(SessionValidationFilter.java:73) [aaa.jar:] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:280) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:248) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:275) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:161) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:489) at org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:153) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:155) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:505) at org.apache.coyote.ajp.AjpProtocol$AjpConnectionHandler.process(AjpProtocol.java:445) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930) at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_75] Caused by: org.postgresql.util.PSQLException: The column name disk_storage_type was not found in this ResultSet. at org.postgresql.jdbc2.AbstractJdbc2ResultSet.findColumn(AbstractJdbc2ResultSet.java:2542) at org.postgresql.jdbc2.AbstractJdbc2ResultSet.getInt(AbstractJdbc2ResultSet.java:2406) at org.jboss.jca.adapters.jdbc.WrappedResultSet.getInt(WrappedResultSet.java:1073) at org.ovirt.engine.core.dao.DiskDaoDbFacadeImpl$DiskRowMapper.mapRow(DiskDaoDbFacadeImpl.java:116) [dal.jar:] at org.ovirt.engine.core.dao.DiskDaoDbFacadeImpl$DiskRowMapper.mapRow(DiskDaoDbFacadeImpl.java:106) [dal.jar:] at org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:92) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:1) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.JdbcTemplate$1QueryStatementCallback.doInStatement(JdbcTemplate.java:446) [spring-jdbc.jar:3.1.1.RELEASE] at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:396) [spring-jdbc.jar:3.1.1.RELEASE] ... 112 more Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] unable to remove cluster because of blank template
Testing today ;-) How do I move/reassign the blank template. I have two clusters and wish to remove the first one that used to be the default cluster. I get the following message: Error while executing action: Cannot remove Cluster. One or more Template(s) are still associated with it When I check, I see the Blank template assigned but I'm unable to remove or edit this. Blank 2008-Mar-31, 23:00 OK Storage TEST Blank template Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] problem with freeipa aaa-ldap setup
Hi again, On a fresh ovirt 3.5.3rc3 install I can't get my ipa integration working anymore. The aaa extension loads correctly and I see the realm in the search window of Add system permissions, but no users/groups are displayed. This used to work fine before and I cannot find any errors. 2015-04-03 11:34:51,935 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-2) Extension 'internal' initialized 2015-04-03 11:34:51,935 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-2) Start of enabled extensions list 2015-04-03 11:34:51,936 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-2) Instance name: 'netbulae-test-authz', Extension name: 'ovirt-engine-extension-aaa-ldap.authz', Version: '1.0.2', Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.0.2-1.el7', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: '/etc/ovirt-engine/extensions.d/netbulae.test-authz.properties', Initialized: 'true' 2015-04-03 11:34:51,937 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-2) Instance name: 'netbulae-test-authn', Extension name: 'ovirt-engine-extension-aaa-ldap.authn', Version: '1.0.2', Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.0.2-1.el7', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: '/etc/ovirt-engine/extensions.d/netbulae.test-authn.properties', Initialized: 'true' 2015-04-03 11:34:51,938 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-2) Instance name: 'builtin-authn-internal', Extension name: 'Internal Authn (Built-in)', Version: 'N/A', Notes: '', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: 'N/A', Initialized: 'true' 2015-04-03 11:34:51,939 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-2) Instance name: 'internal', Extension name: 'Internal Authz (Built-in)', Version: 'N/A', Notes: '', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project', Build interface Version: '0', File: 'N/A', Initialized: 'true' 2015-04-03 11:34:51,939 INFO [org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC service thread 1-2) End of enabled extensions list Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] firewalld rules for engine
Hi, After running engine-setup (3.5.2rc2) on Centos 7, the setup tells me the following In order to configure firewalld, copy the files from /etc/ovirt-engine/firewalld to /etc/firewalld/services and execute the following commands: firewall-cmd -service ovirt-nfs firewall-cmd -service ovirt-postgres firewall-cmd -service ovirt-https firewall-cmd -service ovirt-fence-kdump-listener firewall-cmd -service ovirt-websocket-proxy firewall-cmd -service ovirt-http The commands above don't work, shouldn't they be: firewall-cmd --permanent --add-service ovirt-nfs firewall-cmd --permanent --add-service ovirt-postgres firewall-cmd --permanent --add-service ovirt-https firewall-cmd --permanent --add-service ovirt-fence-kdump-listener firewall-cmd --permanent --add-service ovirt-websocket-proxy firewall-cmd --permanent --add-service ovirt-http firewall-cmd --reload Kind regards, Jorick Astrego Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Missing packages in patternfly repo
Hi, Just a minor issue. We are syncing the patternfly repo in our katello environment and always have two packages missing from the patternfly repos. error_details= [{url= http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-6-x86_64/patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el6.src.rpm;, errors=[Not Found]}, {url= http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-6-x86_64/patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el6.noarch.rpm;, errors=[Not Found]}]}, error_details= [{url= http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-7-x86_64/patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el7.centos.noarch.rpm;, errors=[Not Found]}, {url= http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-7-x86_64/patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el7.centos.src.rpm;, errors=[Not Found]}]}, They are listed as the first packages in the repo primary xml: package type=rpm namepatternfly1/name archnoarch/arch version epoch=0 ver=1.1.2 rel=1.el7.centos/ checksum type=sha256 pkgid=YES 67fdce5675d5d7bcd35b8b685e437d1ba18ae937d93d78a512d86d34838b114d /checksum summary PatternFly open interface project and its dependencies /summary description PatternFly open interface project, with dependencies bundled /description packager/ urlhttps://github.com/patternfly/patternfly/url time file=1424103137 build=1415658262/ size package=2478544 installed=11073797 archive=11284604/ location href=patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el7.centos.noarch.rpm/ format rpm:licenseASL 2.0/rpm:license rpm:vendorFedora Project COPR (patternfly/patternfly1)/rpm:vendor rpm:groupUnspecified/rpm:group rpm:buildhosti-0001c1c8/rpm:buildhost rpm:sourcerpmpatternfly1-1.1.2-1.el7.centos.src.rpm/rpm:sourcerpm rpm:header-range start=872 end=150984/ rpm:provides rpm:entry name=patternfly1 flags=EQ epoch=0 ver=1.1.2 rel=1.el7.centos/ /rpm:provides /format /package Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] network drag and drop
On 02/17/2015 02:37 PM, Nathanaël Blanchet wrote: Hi all, With ovirt 3.5.1, I can't anymore drag and drop network on any physical or bonding interface, but right click attachment still works. Is it an expected behaviour or a bug? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hi, It should work, I had this problem a couple of weeks ago but found out it was my browser being overloaded and dead slow. Please try a different browser and see if that works. Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] bonding problems
, bridged=false, speed=0, type=0, networkImplementationDetails=null}, bond1 {id=null, vdsId=null, name=bond1, macAddress=null, networkName=gluster, bondOptions=mode=4 miimon=100, bootProtocol=STATIC_IP, address=xx.xx.xx.xx, subnet=255.255.255.0, gateway=null, mtu=9000, bridged=false, type=0, networkImplementationDetails=null}, bond2 {id=null, vdsId=null, name=bond2, macAddress=null, networkName=uplink, bondOptions=mode=4 miimon=100, bootProtocol=NONE, address=null, subnet=null, gateway=null, mtu=0, bridged=true, type=0, networkImplementationDetails=null}], removedNetworks=[], removedBonds=[]) execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = Missing required nics for bonding device., code = 21 2015-02-10 17:29:42,425 ERROR [org.ovirt.engine.core.bll.network.host.SetupNetworksCommand] (ajp--127.0.0.1-8702-4) [4be2b53a] Command org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = Missing required nics for bonding device., code = 21 (Failed with error ERR_BAD_PARAMS and code 21) 2015-02-10 17:30:00,053 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (DefaultQuartzScheduler_Worker-32) Autorecovering 2 hosts 2015-02-10 17:30:00,053 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (DefaultQuartzScheduler_Worker-32) Autorecovering hosts id: c4e1f226-a243-4a9a-8fa9-fc65f4518114, name : test4.netbulae.test 2015-02-10 17:30:00,075 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand] (DefaultQuartzScheduler_Worker-32) [655e85c2] Lock Acquired to object EngineLock [exclusiveLocks= key: c4e1f226-a243-4a9a-8fa9-fc65f4518114 value: VDS , sharedLocks= ] When I check the host I see somehow bond0 has appeared and all the ip's have been lost. But I never configured bond0!!! What's up with the bonding? Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Foreman intergration
But this would be a foreman feature offcourse, a bit out of scope for ovirt ;-) On 01/30/2015 02:37 PM, Jorick Astrego wrote: Would not be that hard to script something like this, but I personally was thinking about an update scheduler myself. The scheduler stuff is already there and the whole update mechanism is handled by katello/subscription-manager. With a smart update scheduler you could do lots of fancy stuff. Like rolling out updates/patches over global deployments in pre-defined patterns. You could then use %pre and %post hooks to run any custom commands or API call's you like depending on Host Group and environment. Tie in some reporting and faillure notifications and we all the admins can be free to do others things instead of patching thousands of servers by hand due to the latest glibc/openssl bug. If the scheduled rollout works in test, it should be hands off in production. Keep up the great work! Cheers, Jorick On 01/30/2015 02:25 PM, Oved Ourfali wrote: Not at the moment. Foreman isn't aware that the host is used as a hypervisor in ovirt. Currently foreman allows to create foreman hosts in top of ovirt (you can use compute resources in foreman to do that), and from the ovirt side it allows you to add a new host taken from wither an existing foreman host, or to bare metal provision one. In the future we plan to allow adding vms through ovirt that will also be also added automatically to foreman, which will allow to assign this VM to some host group in foreman, which then will install different packaged, and set up stuff according to the host group definition. Details on the current integration is available at http://www.ovirt.org/Features/ForemanIntegration Oved On Jan 30, 2015 2:32 PM, Karli Sjöberg wrote: Hey all! One thing I am keen on exploring is the Foreman/oVirt integration. I have a vision were that could be used to, as a first step, manage the updating/patching of the Hosts in our datacenter, and if that turns out successful, remove our current Puppet Dashboard as ENC in our main Puppet Master and trade it in for The Foreman. The flow I imagined was to have Foreman tell oVirt engine to set a Host in Maintenance, update all packages and reboot it, then when it´s back, put it back to Active and move on to the next Host. Is that something that´s been worked on? /K ___ Users mailing list Users@ovirt.org mailto:ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:ovirt.org http://lists.ovirt.org/mailman/listinfo/users Met vriendelijke groet, With kind regards, Jorick Astrego* Netbulae Virtualization Experts * Tel: 053 20 30 270i...@netbulae.euStaalsteden 4-3AKvK 08198180 Fax: 053 20 30 271www.netbulae.eu 7547 TA EnschedeBTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Foreman intergration
Would not be that hard to script something like this, but I personally was thinking about an update scheduler myself. The scheduler stuff is already there and the whole update mechanism is handled by katello/subscription-manager. With a smart update scheduler you could do lots of fancy stuff. Like rolling out updates/patches over global deployments in pre-defined patterns. You could then use %pre and %post hooks to run any custom commands or API call's you like depending on Host Group and environment. Tie in some reporting and faillure notifications and we all the admins can be free to do others things instead of patching thousands of servers by hand due to the latest glibc/openssl bug. If the scheduled rollout works in test, it should be hands off in production. Keep up the great work! Cheers, Jorick On 01/30/2015 02:25 PM, Oved Ourfali wrote: Not at the moment. Foreman isn't aware that the host is used as a hypervisor in ovirt. Currently foreman allows to create foreman hosts in top of ovirt (you can use compute resources in foreman to do that), and from the ovirt side it allows you to add a new host taken from wither an existing foreman host, or to bare metal provision one. In the future we plan to allow adding vms through ovirt that will also be also added automatically to foreman, which will allow to assign this VM to some host group in foreman, which then will install different packaged, and set up stuff according to the host group definition. Details on the current integration is available at http://www.ovirt.org/Features/ForemanIntegration Oved On Jan 30, 2015 2:32 PM, Karli Sjöberg wrote: Hey all! One thing I am keen on exploring is the Foreman/oVirt integration. I have a vision were that could be used to, as a first step, manage the updating/patching of the Hosts in our datacenter, and if that turns out successful, remove our current Puppet Dashboard as ENC in our main Puppet Master and trade it in for The Foreman. The flow I imagined was to have Foreman tell oVirt engine to set a Host in Maintenance, update all packages and reboot it, then when it´s back, put it back to Active and move on to the next Host. Is that something that´s been worked on? /K ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] hashed adminpassword?
Can I hash the password in OVESETUP_CONFIG/adminPassword, I'd like to have puppet run the installer with an answer file and don't like this password stored in clear text in foreman and the documentation. I know it doesn't guarantee security on it's own, but not everyone has to see that my password is 123456 ;- Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] gluster only hosts managed by oVirt?
On 01/28/2015 04:56 AM, Kanagaraj wrote: On 01/27/2015 06:47 PM, Sven Kieske wrote: On 27/01/15 13:56, Jorick Astrego wrote: For both we provision some custom os install and configuration. Currently I am only able to manage and view gluster volumes from ovirt when the Enable Gluster Service is enabled for the Cluster. Right? AFAIK correct. Right. There is a Enable Virt Service flag but the options is selected and greyed out. So I'm not able to disable it. Mhm this is sad. I'm not aware of any bug tracking this, will you open one? It's also possible I missed it, there are too many bugs to remember them all. This can happen if there are any VMS in the cluster you are trying to edit. Do you have any VMS running on the cluster? If you create cluster with just 'Enable Gluster Service' selected, you should be able to manage your gluster hosts. Here the hosts need not to have any virtualization stuff in it. Thanks, Kanagaraj Ah this could be a problem, I had been testing with nodes too that I removed although I cannot remember the exact sequence. There may have been some remnants of vm's on there, I'm currently reprovisioning the whole environment so I cannot check. What I did test before wiping everything, is creating a new cluster and I was able to deselect the virt service and select gluster only. So that appears to work, nice! One problem I already noticed is that the import current gluster setup function doesn't work properly in our environment. We use a seperate gluster storage lan that isn't the sepearated from our ovirtmgmt lan and I think this messes things up a bit. But I will see after provisioning has finished. Thanks a lot so far! Met vriendelijke groet, With kind regards, Jorick Astrego Netbulae Virtualization Experts Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A KvK 08198180 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede BTW NL821234584B01 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users